HCL 10.4.1

From OSx86
(Redirected from HCLPart)
Jump to: navigation, search
Mac OS X 10.4.1
Hardware Compatibility

This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for 10.4.1 builds only.

For how to edit the Wiki, please see this thread. Thank you!

You're looking for an Installation guide? see here

Note: If your hardware doesn't work, put it in the Incompatible hardware list.

Contents

[edit] Compatible Hardware

Also check the System Extensions available in x86 Tiger.

[edit] Accelerated graphic cards

If you get an ATI or nVidia card running with acceleration, please write a Howto and link it to your card record.

  • Integrated i915G Intel GMA900 - all resolutions - works with QE, Core-Graphics/Image/Video (2D and 3D) (sony vaio fs550 - only 1024x768x32 - no QE no Core) :(
  • Integrated i945G Intel GMA950 - all resolutions QE + CI. Need to edit 915 kexts to have your 945 Info.
  • Integrated 82865G (device id 8086 2572 - match 0x25728086) - all resolutions - works with QE, Core-Graphics/Image/Video (2D and 3D). Not all versions, though (HP d530 works, IBM desktop doesn't), it's about luck
  • Silicon Image Orion ADD2-N Dual Pad x16 PCI-Express (DVI-AddOn card for i915G onboard chipset, made for HP p/n: DY674A-Full size bracket; DY673A-Low profile bracket)
  • Silicon Image Orion ADD2-N Dual Pad x16 PCI-Express (DVI-AddOn card for i915G onboard chipset, made for Dell p/n: J4570-Full size bracket; J4571-Low profile bracket) Note: These Dell cards are apparently identical to the equivalent HP cards listed above, but are often available at a much lower price; they provide DVI output from the onboard GMA900 video at resolutions thru 1920 by 1200 @ 60HZ.

[edit] VESA compatible unaccelerated cards

  • Try to set "Graphics Mode"="WidthxHeightxDept.", ex: "GraphicsMode"="1280x1024x32"
  • If Darwin detects VESA 3.0 you can set the refresh rate: "GraphicsMode"="1280x1024x32@85"
  • The Tips and Tricks page has a tip for making Graphics Mode settings permanent...

[edit] ATI

* Please visit ATI Drivers for progress on loading the ATI driver set.

  • All-In-Wonder Radeon (Original) - Delete all ATI* drivers to get to work.
  • Radeon IGP 340M - No QE, No CoreImage, VESA 2.0, 1024x768 at 60Hz
  • Radeon 7000 - VESA 2.0 1024x768 (I got 1280x1024x32@85). OpenGL works, no QE or Core Image.
  • Radeon 7200 - VESA 2.0 1280x1024x32.
  • Radeon 7500 - VESA 2.0 1280x1024x32 @ 60 Hz. OpenGL works, no QE, no Core Image.
  • Radeon 7500 AIW - VESA 2.0 1024x768x32 @ 60 Hz. No OpenGL, no QE, no Core Image. Must remove all ATI extensions from system to make it work.
  • Radeon 8500 AIW - VESA 2.0 1280 @ 60 Hz
  • Radeon 8500LE - VESA 2.0 1280x1024 @ 60Hz
  • Radeon 8500 64mb BBA - 1024x768x16 @ 60Hz
  • Radeon 9000/9200 Mobile - Vesa 3.0 1280 all resolutions worked for me, i'm running 1600x1200x32 but the monitor out doesnt work and a high resolution (i think it only outputs 800x600 at some weird rf rate) and no open gl or direct 3d, video works great tho, and the system looks gorgeous at 1600x1200x32 native.
  • Radeon 9000 Pro - VESA 2.0 - 1024x768 only, no QE
  • Radeon 9100 - VESA 2.0 - 60Hz only, no QE, no OpenGL
  • Radeon 9200 - VESA 2.0 - 1280x1024x32 no QE, or acceleration
  • Radeon 9200 SE - Graphics look garbled when menus move (no 2d acc?) 1 working resolution 1024x768x32 60hz (Worked great for me, even changed resolutions), install maxxus patch to fix
  • Radeon 9250 - No QE, No CoreImage, VESA 2.0, 1024x768 at 60Hz
  • Asus Radeon 9550 - Recognized as "16 MB. Radeon 9600Pro", No QE, No CI, VESA 2.0 1024x768@60 Hz
  • Radeon 9250 (PowerColor) - VESA 2.0, 1280x1024 at 60Hz
  • Radeon 9500 - The 9700 with the 4 pipelines disabled works fine for me
  • Radeon 9550 - No QE, No CoreImage, VESA 2.0, 1024x768 at 60Hz, 1280x1024 at 60 Hz
  • Sapphire Radeon 9550 (Recognized as 9600PRO) - VESA 2.0, 1024x768
  • Radeon 9600 AGP8x 256MB VRAM -No QE, No CI, Vesa 2.0 1024x768x32 at 60Hz, some glitches. Boot only in safe mode. UPDATE: QE AND COREIMAGE WORKING IN 10.4.3 (Maxxus patched DVD native installation ) Couldn't be more happy!
  • Radeon 9600 SE - No QE, No CoreImage, VESA 2.0 at 60Hz
  • Radeon 9600 Pro SE - VESA 2.0 at 60Hz, 1024, 1280, works with ATI extensions removed or -x (safemode)
  • Sapphire Radeon 9600 Pro - No QE, VESA 2.0 1024x768x32 @ 60Hz. Deleted the Radeon9700.kext file and boots fine with -v -f. No safe mode!

Same for me but DO NOT DELETE the driver quoted, you would need to reinstall in some cases ! Just boot in safe mode with -x, works much better !

  • Radeon 9600XT - no QE no CoreImage Vesa 2.0, 1280, 60Hz
  • Radeon 9600XT Asus AGP (PCI ID 5964) Vesa 2.0@1024x768x32
  • Radeon 9700 Pro AGP - Delete all ATI* files on extensions folder to avoid yellow death screen.
  • Radeon 9800SE AGP - Delete all ATI* files on extensions folder to avoid yellow death screen.
  • Radeon 9800Pro AGP - Delete all ATI* files on extensions folder or won't boot. Set resolution at darwin bootloader ("Graphics Mode"="1280x1024x32"). VESA 2.0
  • Radeon 9800XT AGP - no QE no CoreImage VESA 2.0 1280x1024x32@70 Set resolution at darwin bootloader "Graphics Mode"="1280x1024x32"
  • Radeon 9800XL AGP - Delete ATI* files in System\Library\Extensions to be able to boot. No QE or acceleration.
  • ATI Mobility Radeon 7500 16MB DDR, VESA 2.0, 1024x768x24 by boot command
  • Radeon Mobility 9600 -Remove all ATI* files on extensions folder to avoid yellow death screen.
  • Radeon Mobility 9700 - Vesa 2.0. Delete all ATI* files on extensions folder to avoid yellow death screen.
  • Radeon Mobility 9800 - Vesa 2.0. Remove all ATI*.kext in /System/Library/Extensions.
  • Radeon Mobility FireGL T2 - Bootloader sees card as Mobility 9700 w/ 128mb VRam, behaves just like Mobility 9700. Reason for drivers not loading correctly is that the AGP-PCI bridge driver doesn't load. You must find the VID and DID of your Bridge driver and add it to AppleI386PCI.kext for the ATI driver to load. Problem is that even with the driver kext loading correctly my display comes up purple tinged and still not video accelerated, so more work is needed. [Addendum] Shows up as Radeon Mobility 9600 for me (maybe yours is a T2e?) and runs fine w/ VESA 2.0 at 1400x1050x32; horrible artifacting when loading ATI kext --> unusable.
  • Radeon Mobility X600 PCIe - VESA 2.0 stuck on 1024x768x32, no other options available. - I'm using it at 1400x1050x32.
  • Radeon Mobility X700 PCIe - VESA 3.0. Runs only at 1024x768 with 16MB, while specs say 1200x800 with 64MB.
  • Radeon VE 32MB PCI - VESA 2.0, works at 1024x768 at 60Hz
  • Radeon X200 XPRESS (RS482) - VESA 2.0 Works only at 1024x768 at 60Hz
  • Radeon X300 (Inspiron 6000) - No QE but 2d acceleration works.
  • Radeon X300-SE PCIe - VESA 2.0 , stuck on 1024x768x32 (setting any other graphics mode causes 'frequency out of range') 2d works.
  • Radeon X550 PCIe - VESA 2.0, works at 1024x768 (works in 1280x1024 too, NOT manual refresh rate)
  • Sapphire X600 Pro (You have to delete all card drivers) - VESA 2.0 1024x768
  • Radeon X700-series PCIe - VESA 3.0 1600x1200 at 60Hz
  • Sapphire X700 Pro PCIe - VESA 3.0 1600x1200 at 60Hz
  • Radeon X700AGP(with rialto bridge) - VESA 3.0 supported
  • Radeon X800-series PCIe - VESA 3.0 1280
  • Radeon X800SE AGP - VESA 3.0 supported. Must remove all ATI extensions from system to make it work.
  • Sapphire Ati Radeon X800XL (You have to delete all ATi and intel drivers) - VESA 3.0 1280x1024x32
  • Radeon X850XT PE PCI-Express - VESA 3.0, 1280x1024x32
  • Radeon Xpress 200 - No QE, No CoreImage, VESA 2.0, 1024x768 at 60Hz
  • Rage (4MB) up to 1024x768x16 VESA 2.0
  • Rage II XL (on ASUS PSCH-L motherboard) VESA 2.0
  • Radeon X1600XT PCI-Express - CI and QE Works (no resolution change) use 10.4.4 ATIRadeonX1000.kext and 10.4.4 AGL + OpenGL extra files - don't replace anything
  • Radeon 4850X2 - DC PCIe - No 3d acceleration; 2d works partly.

[edit] NVIDIA

* Please visit http://macvidia.plusmediamusic.com for progress on loading the nVidia driver set.

  • GeForce2 Go - Vesa 3.0, 1280 x 1024
  • GeForce MX400 64 MB - Vesa 3.0, 1024x768 (no acceleration)@85 refresh rate works after modifying the boot sector, see here: http://forum.osx86project.org/index.php?showtopic=2839&st=0
  • GeForce2 MX400 32Mb - VESA 3.0, 1024x786*32, no QE. Higher resolutions result in monochrome/gray display in correct resolution.
  • GeForce2 MX440 32MB - Vesa 3.0, 1024*768*32
  • GeForce2TI Pro - Vesa 3.0, 1024x768 (no acceleration)
  • GeForce2 PRO/GTS - Vesa 3.0, 1024x765x32@85
  • Geforce3Ti 200 64MB - Vesa 3.0, 1024*768*32, No QE, No CI. Nothing else tested.
  • GeForce3Ti 500 64 MB - Vesa 3.0, 1024x768x32, Can go up to 100Hz. No Quartz Extreme, No CoreImage.
  • Geforce4 MX400 - VESA 3.0, as reported by Darwin, but the @75, @85 refresh frequency selection part makes Darwin restart! Only workable resolution is 1024x768x32 Higher resolutions produce a monochrome display! No CI, No QE
  • Geforce4 MX420 - VESA 3.0, as reported by Darwin, but the @75, @85 refresh frequency selection part makes Darwin restart! Only workable resolution is 1024x768x32 Higher resolutions produce a monochrome display! No CI, No QE
  • GeForce4 440 Go - Max res tried and succeded with was 1600x1200
  • Geforce4 MX440 with or without AGP8x - No QE, No CoreImage, VESA 3.0, 1280, 85hz Refresh Does it really work at 1028x1024x32@85 ? Mine restarts as soon as I type. parch: "i don't think it works, mine restarts too, whenever i try to change refresh rate."
  • GeForce4 MX460 - VESA 3.0 1024x768 no acceleration
  • GeForce MX 4000 - VESA 3.0, 1280x1024 (no accelleration)
  • GeForce4 Ti4200/Ti4400/Ti4600 - No QE, No CoreImage, VESA 3.0 1280x1024x32 max How ??? || only the default 1024 works correctly with color; all other settings (32/16) result in monochrome colors but correct resolution.
  • GeForce4 4200Go - Vesa 3.0 will go up to 1280x1024, No CoreImage, No QuartzExtreme.
  • GeForce FX 5200 - No QE, No CoreImage, VESA 3.0 1280x1024x32 @ 85Hz, Extended desktop dual-head display not working.
  • GeForce FX 5500 - VESA 3.0 Resolution 1280x1024x32@60Hz No QE, No CoreImage
  • GeForce FX 5600 - No QE, No CoreImage, VESA 3.0 1280x1024x32 max
  • GeForce FX 5700 - No QE, No CoreImage, VESA 3.0 1280x1024x32 max
  • GeForce FX 5700 LE - No QE, No CoreImage, VESA 3.0 @ 1024x768x32 max
  • GeForce FX 5700 Ultra - No QE, No CoreImage, VESA 3.0 @ 800x600x32/60Hz ONLY || ? I have 1280x1024x32 working correctly, but extended desktop dual display is NOT working (Dell 4600 P4 2.4 GHz HT)
  • GeForce PCX 5300 - No QE, No CoreImage, VESA 3.0 1280x1024x32@60
  • GeForce PCX 5750 PCIex - No QE, No CoreImage, VESA 3.0
  • GeForce FX Go5200 - No QE, No Coreimage, Vesa 3.0 @ 1280x1024x32
  • GeForce FX Go5600 - VESA only
  • GeForce FX Go5700 - No QE, No CoreImage, VESA 3.0, works @ 1024x768x32@65Hz, max not tested
  • GeForce FX Go5700 (Toshiba P20 laptop) - Driver wont load (tried everythings) No QE,CI, VESA 3.0 support
  • GeForce FX5900 - VESA 3.0 only 1280x1024x24
  • Geforce 5900XT - VESA 3.0 1280x1024@60Hz
  • Geforce 6200 TurboCache(TM) - No Quartz, VESA 3.0 @ 1024x768/60Hz & 1280x1024/60Hz
  • Geforce 6200 - VESA 3.0 @ 1024x768/60Hz, No QE or CoreImage. nVidia driver alpha works.
  • Geforce 6200 (NV43 AGP model) - VESA 3.0 @ 1280x1024x32@75 + TV-out working
  • Geforce 6200 *(WinFast A6200 TD) AGP 8x @ 1024x768
  • Geforce 6600 PCIex - 1024x768@80Hz
  • Geforce 6600 Go PCI Express 128MB (300MHz Core/600MHz Memory) - VESA 3.0 Only, No Quartz Extreme, No CoreImage. 1024x768 32bit, 1280x1024 32bit Max.
  • GeForce 6600GT PCIex - Vesa 3.0
  • GeForce 6600GT PCIex/AGP - Vesa 3.0 1280x1204x32 Maxi /60Hz only
  • Geforce 6800,6600 - No QE, No CoreImage, VESA 3.0 1280 /60HZ only
  • GeForce 6800 GT - VESA 3.0 1280x1024x32 60Hz only, No QE/CoreImage
  • GeForce 6800 Ultra Go - No QE, No CoreImage, VESA 3.0 1024x768x32/60Hz ONLY
  • GeForce Quadro4 780 XGL - No QE, No CoreImage, VESA 3.0 @ 1024x768x32
  • GeForce Quadro FX 500 - No QE, No CoreImage, VESA 3.0 @ 1024x768x32
  • GeForce Quadro2 MXR/EX - No QE, No CoreImage, VESA 2.0 @ 1024x768x32/60Hz ONLY
  • GeForce Quadro FX 4000 - No QE, No CoreImage, VESA 3.0 @ 1280x1024x32 & 1024x768x32
  • GeForce 7800GTX PCIe - No QE, No CoreImage, VESA 3.0 @ 1680x1050x32 & 1024x768x32 & 1920x1600@32
  • GeForce 7800GT PCIe- No QE, No CoreImage, Vesa 3 @ 1024x768x32 and 1280x1024x32 no higher refresh rate than 60Hz with MacVidia driver, recognized as chipset 0x0092 not 7800GT
  • GeForce Vanta - Vesa 3.0, 1024x768 (no acceleration)
  • TNT2 - No QE, No CoreImage, VESA 3.0 @ 1024x768x32

[edit] Other

  • 3dfx VooDoo4 AGP - VESA 2.0 1024x768 - Tested just for kicks.
  • Integrated Intel i855GM - VESA 3.0 - QE supported, read solution in forum
  • Matrox G400 AGP - VESA 2.0 800x600 with old BIOS, VESA 3.0 1280x1024x32 with new BIOS (BIOS for this card from Matrox BIOS page - I had to upgrade from my BIOS version to 208 (setup208.exe) to the latest (setup_258.exe) )
  • Matrox G550 AGP - no output on second head (second head not recognized in syspref-displays), VESA 3.0, 1280x1024x32@75 - Quicktime Videos work fine
  • eMachines T1740 onboard Intel Graphics - No Quartz Extreme (QuickTime videos are green unless minimized in Dock)
  • SiS 6329 PCI 4MB - VESA 2.0 1024x768
  • SiS 650 Onboard - VESA 3.0 1280x1024x32@75Hz
  • SiS 760 Onboard
  • S3 SuperSavage IXC 1179 1024x768 - TVOut Not working. Quicktime videos work. no 3D acc.
  • S3 SuperSavage Pro - 1024x768
  • S3 Savage4 - 1024x768 Vesa 3.0 No 2D/3D acc. No QE/CI
  • Intel Extreme Graphics 82845G Graphics Controller - QuartzExtreme supported, No 2D/3D Acc, No CoreImage
  • Integrated UniChrome Pro 3D Graphics in VIA PM800 chipset - works fine in VESA 3.0, 1280x1024 No Quartz Extreme, No CoreImage, no 2D/3D Acc
  • Intel 845GL - Works on my Inspiron 1100, but so far only in Safe Mode. Make sure to give it 8MB of memory in the BIOS, if you have the option.
  • Cyber ALADIN works VESA 1024x768 - Chess game dont work wery vell. :(
  • VIA/S3 unichrome pro IGP Vesa 3.0
  • Number 9 Revolution 4 32mb PCI VESA 2.0 1600x1024 - works flawlessly connected to an SGI 1600SW flatpanel...

[edit] CD Burners

  • ASUS CRW-4816 CD-RW 48/16/48 - works fine.
  • Generic 52x32x52 ATAPI - reads CDs fine, but have not tested burning them.
  • LaCie 16x10x40x USB & FireWire External - Seems to read a disc on USB okay, have not tested functionality beyond that
  • LG HL-DT-ST - CDRW - GCE-8526B
  • LG HL-DT-ST - CDRW - GCE-8525B
  • LITE-ON COMBO SOHC-5236K 52X32X52X, 16X, Firmware RK01, (Burnproof, Burn Underrun, = yes) CD/DVD/CD-R/DVD-+R read ok, CD-R burn ok, max burn speed was 32X, CD-RW untested. Burned in Finder.
  • MATSHITA UJDA755yDVD/CDRW -- have burned up to 12x with no problem -- Typical drive in IBM laptops -- In my T42 and T30.
  • Memorex 52x32x52x IDE - (some files need to get patched to make it work with osx tools, 3rd party tools like DiskBlaze work 100%)
  • NEC CD-RW NR-9100A - works just fine!
  • PHILIPS CDRW/DVD CDD 5263 - reads CDs and DVDs fine, didnt test burning them.
  • PLEXTOR CD-R PX-W1210A - reads fine, burns full speed (12x), burnproof recognized, but not needed by now, RW not tested, but should be working as well
  • SAMSUNG CDRW/DVD SN-324S
  • SAMSUNG CDRW/DVD SM-352B
  • Samsung TSSTcorpCD/DVDW TS-H552B (Burned CD easily from finder, burned DVD-R and DVD+RW from toast.)
  • Sony 8x4x24x IDE - burned CD fine in Finder
  • TEAC 516E - recognized and read - no burning tested
  • TEAC DW-224E-A - regonized using boot options platform=X86PC or platform=ACPI, w/ apple supported burning, but burning not tested
  • TOSHIBA DVD-ROM SD-R2102 recognized with no additional boot parameters nor files. Working fine.
  • Plextor PX-W2410A works fine.
  • Plextor Premium - Works fine.

[edit] DVD Burners

  • AOpen DUW-1608 16x DVD+-RW DualLayer. Works 99% I've written lots of CD's & DVD's(+-R(W))DualLayer not tested yet tho.. Tested with iTunes & Finder...
  • ASUS DRW-1608P - Correctly detected as dvd-rw but doesn't perform any test yet.
  • BenQ DW822A (Plus) 8x DVD+/-RW - Correctly detected as dvd-rw but doesn't perform any test yet.
  • BenQ DW1620-BK 16x DVD+/-RW - recognized, burns from finder
  • BenQ DW1620-BK (in external USB case) 16x DVD+/-RW - recognized burns from Toast 6.1
  • EMPREX DVDRW IDE 16x - reads CDs, DVDs, burns single layer DVDs, have not tested DL burning
  • HL-DT-ST-DVDRAM GSA 4040B DVD+-R/RW (DVD Burning tested & working with toast 6.1, Burns CD up to 8x)
  • HL-DT-ST DVDRAM GSA-4081B DVD-R, -RAM, -RW, +R, +RW works fine,burning with Finder and Disk Utility(Toast not tested yet)
  • HL-DT-ST DVDRAM GH22NS50 DVD+-R/RW
  • HP DVD Writer 300c - Works 100%, Finder, Toast, and iTunes.
  • HP DVD Writer 200i - Works 100% with Patchburn4
  • HP DVD Writer 420i - Works 100% with Finder. (Noelio) <- Mine 2 (BugLamp)
  • I/O Magic 8x DVD+/-R/W - Sysprefs recognizes it, but I have not tested it.
  • I/O Magic 16x DVD+/-R/W - Works fine with Toast, tested and working.
  • IOMEGA DVD-RW Single Layer 4x - Works with Finder, Toast.
  • LG GSA-4040B DVD+-R/RW (DVD Burning working, Burns CD up to 12x)
  • LG GSA-4183 SuperDrive DVD ±RW+DL - Works 100%, Including Burning with Finder (Toast not tested yet)
  • LG GSA-4120B A117 DL Dual - Detected by Apple System Profiler. Not tested yet
  • LG GSA-4163B - CD/DVD/RW works tested with Finder, reads also UDF 2.0 (DVD-RAM)
  • LG GSA-4165B - CD/DVD/RW works tested with Finder, reads also UDF 2.0 (DVD-RAM)
  • LG GSA-4167B - OK (i found it not to show up in finder or anywhere for that matter) please contact SpamBadger on fourms
  • Lite-On it SDW-431S - recognized and read - no burning tested (Toast recognizes it)
  • Lite-On 16X DVD+R/+RW Double Layer Internal. Work perfectly, even with iTunes
  • Lite-On SOHW-1673S - Everything works fine, burning with Toast 6 with no problems.
  • Mathista DVD-RAM UJ-822S Slim IDE/ATAPI read and burn CD-R/W DVD-R/W DVD+R/W DVD-RAM
  • Mathista DVD-RAM UJ-815A half height IDE DVD-RW, works fine
  • NEC ND-3540A DVD+/-R/W DL - works well burning from finder and disk utility
  • NEC-1100A - burned a DVD with toast
  • NEC DVD+RW 2100AD - Seems to work fine. Tested with whatever is built into OSX.
  • NEC DVD/RW ND-2500A - Tested with BurnXFree, burns CDs (->32x) and DVDs (->4x) perfectly.
  • NEC DVD/RW ND-2510A - Works Well- Burns cd's
  • NEC ND-3520A DVD+/-R/W DL - Everything recognizes it, tested with Finder, Disk Utility, and hdiutil.
  • NEC ND-5100A - No problems burning a CD with Finder.
  • NU DDW-163 16x DVD±RW+DL - burns in finder
  • Pioneer DVR-104 DVD-RW (native OS Support for iApps !)
  • Pioneer DVR-105 DVD-RW - CD or DVD shows up on desktop, but have not tested whether it burns DVDs.
  • Pioneer DVR-106/A06(OEM) DVD-RW - Works well
  • Pioneer DVR-107D - Firmware 1.13, recognized as Apple Shipped/Supported device.
  • Pioneer DVR-108 DVD-RW - DVD shows up on desktop, but have not tested whether it burns DVDs, Failed to Burn DMG, DVR-110 OK
  • Pioneer DVR-109 DVD-RW - Works and burns 100% Recognized as Pioneer Superdrive.
  • Pioneer DVR-110 DVD-RW - Bootable, Makes & Burns DMG's Fine, failed on DVR-108
  • Philips DVDRW112 , Error verification DVD burning (me no Speake english , correction please)
  • Plextor PX708A DVD+/-R(W) - Works 100%. Incl. Burning.
  • Plextor PX-708UF (USB/Firewire External CD/DVD burner) - works great, with firewire or with USB. Can boot from it with BIOS support.
  • Plextor PX712A DVD+/-R(W) - Works 100%. Incl. Burning.
  • Plextor PX716-UF DVD+/-R(W)-DL - Works and burning. External Firewire Drive.
  • PLEXTOR DVDR PX-716A (boot and install programs. don't know if can burn)
  • Rosewill RD-162x -R -RW +R +RW +R DL -- Works fine, only tested with Finder and Toast. Have not tested Dual Layer Discs
  • Samsung TS-H552 DVD+-R/RW - burned a DVD from an ISO file
  • Samsung DVD R/RW SH-W08A
  • Sony DRU-500AX - recognized not tested but works on my mac (could also work with DRU-500xy)
  • Sony DRU500A DVD+/-RW burner - recognized fine. Haven't tested using it.
  • Sony DRU-510A DVD+/-RW burner - recognized in finder an itunes. Burns CD and DVD's native.
  • Sony DRU-700A - DVDRW/CDRW - Works fine... have not tested in all apps
  • Sony DRU-720A USB External - recognized, folliwing info from system profiler: burn supported (not apple supported), reads CDs/DVDs, burning not tested..
  • Sony DVD RW DW-D26A
  • Sony DRX-800UL/A External - recongized, burned dvd with Toast 6, suggest to upgrade firmware to version KY04 before burning,since version KY01 fried a few dvd-r.
  • Sony DW-D56A (laptop media bay drive) - DVD+-RW works fine.
  • Sony DW-22A - Supports writing CD's from Finder
  • Toshiba 16x Dual-Layer DVD+RW (SD-R3572) - System says no Burn support, Reads like a charm.
  • TDK 880N external burner works fine using Toast 6.1 Titanium. iDVD player does not recognize it though.
  • TEAC DV-W516GB USB DVD double layer burner works reads, burns, CD-R and DVD-R tested

[edit] Sound

AC97/HDA Devices

ICHs:

  • Intel ICH2/ICH4/ICH5/ICH5R/ICH6 AC97 Audio Does microphone work?
  • Intel ICH7 HD Audio on Realtek AC(Need to add ALC882 and Audio controller to Azalia kext (two info.plists))
  • VIA VT8233 VT8235 VT8237 only the left channel works

Codecs:

  • ADI AD1985 - doesnt' work "out of the box", integrated on ASUS P4C-800 Rev. 2.00. Haven't done any kext modifications. - Works for me "Out of the box", both P4C800-E and P4P800 SE. Even good for Reason! :P

- This card, integrated on P4C800-E Deluxe, works after a simple fix! Do as told here -->[1]

  • C-media AC'97 - works. Required IOUSBFamily.kext from Darwin 8.01 CD
     My CMI9738 does not work, how did you get it to work? - phalanx31@gmail.com
     My CMI9738 doesn't work either - xpbehanger@gmail.com
  • C-media AC97 9880 series (featured on some Gigabyte boards) - sound works but stutters under iTunes (SSE3 P4 3.6GHz), volume control doesn't work, only one output
  • C-media AC97 9880 included in ASUS P5GDC-V Deluxe motherboard fully works but no SPDIF (line in and mic in do not work for me!!!!!)
  • Realtek AC'97 Audio for VIA a.k.a VT8235 (Works - left channel only, if you have pitched sound set the Output to 48 KHz). <- Work greats, thanks to whoever found the trick. To set 48Khz, Application -> Utilities -> Audio MIDI Setup. Change from 44.1KHz to 48KHz. ALAS!
  • Realtek ALC655
  • Realtek ALC658 (onboard Gigabyte K8VT800 and other mobos) - works perfect! MUST set output to SPDIF in control panel and pull out the speaker cord just a little bit to get stereo sound
  • Realtek ALC850 (nForce Audio)(requires kext plist file edit)
  • Realtek ALC850 (Intel Audio)
  • Realtek ALC855
  • Realtek ALC860 (works on my Intel D915GAVL board) (can't get audio inputs to be recognized)
  • Realtek ALC880 (use firedrake's method Restart from WinXP can get audio output)
  • Sigmatel C-Major Audio (Dell 700m, use AppleAC97 kext from Darwin)(choppy sound in my inspiron 9100)
     At choppy sound, try setting up in Midi&Ausio Setup the audio rate to 480000. This works for me great! ' 
  • SoundMax Integrated Digital Audio (AC97) works in stereo through mic in and optical out is enabled ! (simply followed the AC97 guide and activated SPDIF out in sound preferences)It means that microphore works or doesn't work?
  • Yamaha AC-XG Auto-detected: by BIOS, not by OS.


USB Devices

  • Audiotrak Maya 5.1 USB Audio
  • Audiotrak Maya 44 USB: it works good
  • C-Media USB Audio (no additional drivers required).
  • Creative Extigy (USB) (Sound stutters under load though)
  • Creative Audigy 2 NX (USB) (Sound stutters under load though)
  • Creative SB Live! 24-Bit External USB
  • Creative SoundBlaster MP3+ (USB)
  • Griffin iMic - USB, so it bypasses the problems of soundcard drivers
  • Griffin Radioshark
  • GWC AA1500 USB Audio works in stereo, no driver needed (Newegg.com).
  • LabTec Verse704 USB Microphone. Shows up as AK5370 in ASP & Sound Pref Pane.
  • Logitech QuickCam Communicate STX - built in usb microphone works (reported as unknown usb audio device, yet it fully works!)
  • Logitech USB headset (Both stereo audio playback and normal mic recording work just fine.)
  • M-Audio DUO (doesn't work in safe mode)
  • M-Audio Black Box (doesn't launch in System preferences panel with M-Audio drivers but works! Sometimes it jitters with certain audio/video files)
  • M-Audio Audiophile | Comment: Which Audiophile? USB/Firewire/2496 !? i just purchased USB and it stutters like crazy so it does not work 4 me....i have sse3 cpu and d915gav motherboard - AP2496 doesn't work, the Mac Delta drivers won't load
  • M-Audio MobilePre (external USB box) on quick test works with iTunes but with occasional stutter on CD playback.
  • MD-Port DG2 (USB) work(intel915gav) - Don't work in Dell inspiron 600m
  • Microsoft Digital Sound 80 Surround USB Box "Has it's own Built-In Sound processor" WORKS!
  • Philips Aurilium (PSC805) USB (no additional drivers required)
  • Shark EXSound (USB) 5.1 audio adapter works great in Stereo mode without any drivers. Works great streaming iTunes radio even under heavy load.
  • Sonica Theater (USB) (coax out works) no volume support stuck on high
  • Sitecom CN-126 - USB 5.1 Audio adapter works "out of the box", with volume support, mic in, the works. link title Got it for only €20. Is USB 1.1 though. No drivers needed. WORKS!
  • USB Speakers from G4 Cube, cut off the speakers and use the audio jack output. Works perfectly!
  • Xitel HiFi-Link (external USB) works
  • Emagic EMI 2/6 works perfect with the drivers available on emagic site.
  • Original(USB) Apple harman/kardon Soundsticks
  • Philips DGX220 'USB 2.0 Digital PC Speakers. Works perfect. Buttons and even analog headph/Mircoph recognized.
  • ST Lab M-330 (USB) - Everything works, although sound volume controls ranges from high to very high

Apparently, almost all USB devices work with the generic drivers.

PCI Devices

  • C-Media 8738 PCI audio codec (kernel extension here. src here. Open a terminal, cd to the download directory, tar xzvf CMI8738PCIAudioDriver-0.6.4.tar.gz, ./install.sh, enter your root password and you're done - though you might need to change the .tar.tar extension to .tar.gz.) * Note: Currently output only, it is unclear whether this is under active development.
  • PCI SOUND CARD- SoundBlaster (creative) 128, works with Maxxuss's Audio Patch -Cindeaux

Firewire Devices

  • Edirol FA-101 (apparently works natively with coreaudio under apple's built in applefwaudio.kext as it is based on the BEBOB boartd)I have not personally verified this - Dan the Soundman - Works fine (but makes poping sounds when the audio is supplied by a PPC app, i.e. iTunes)
  • Edirol FA-66 (same as FA-101 above and Presonus Firepod) ok i have tested this one works but when i playback and record it has a constant clicking
  • Presonus Firepod (see edirol FA-101 above in the list)
  • RME FIREFACE 800 FIREWIRE ......and just download from there sight the "fireface_x86.gz" driver Mac OS X Intel (10.3 or up) driver for Fireface 800. Fully functional, with audio, TotalMix, Settings and MIDI. Only x86, not PowerPC compatible! Pre-release. (07/18/2005)
  • ON BOARD FIREWIRE ON MSI K8N NEO4/SLI, works perfect.
  • ON BOARD FIREWIRE ON MSI K8N Neo Platinum, works perfect. (Booting not tested yet)

[edit] Printers

  • Epson Stylus Photo R200 (Epson Print CD installs and works great!)
  • Epson Stylus Photo RX600 (All Works)
  • Epson Stylus C64 Works without any configuration!
  • Epson Stylus Color 670w works without any onfiguration!
  • Lexmark Z42 (Automatically recognized, print features work)
  • HP Deskjet 970 CXi (works with Gimp-beta2 for Deskjet 900 Series Driver from the OSX DVD)
  • HP Deskjet 3820 (works with Gimp-beta2 for Deskjet 900 Series Driver from the OSX DVD)
  • HP Deskjet 895Cse
  • HP Deskjet F380
  • HP Laserjet 1012 (Automatically recognized - 10.4.3 with maxxuss / wesley patched DVD)
  • HP Color Laserjet 2550
  • Canon IP4200
  • Canon MP560
  • HP PSC 1210 (Get the drivers of HP's website)

[edit] Ethernet

  • 3Com
  • AMD
    • AMD PCNET II - get driver from Maxxuss's site.
  • Adaptec
    • ANA6911A/TX (DEC 21140-Ax)
  • Airlink
    • ASOHORL PCI Fast Ethernet Adapter for Windows, Linux, Unix (99 cents at Fry's)
  • Broadcom
    • BCM4400 10/100 integrated controller
    • 440X 10/100 integrated controller
    • BCM5701 Gigabit Ethernet integrated controller
    • BCM5705M Gigabit Ethernet - Dell SC420+Acer 1692 integrated doesnt work
  • Conceptronic
    • c100i (10/100 Mbps PCI network card, with WOL)
  • D-Link
    • Fast Ethernet DFE-500TX
    • Express EtherNetwork DFE-530TX+ (Rev-C1 does NOT work. DL10030B chipset)
    • DFE-538TX
    • DFE-570TX (All four ports work)
  • Encore
    • ENL832-TX-RENT (RTL8139D based chip...recognized as Realtek 8139)....works soooo sweet...even faster than in XP
  • Intel
    • 82559-based NIC (EtherExpress Pro/100+)
    • PRO/100 VE and PRO/1000 - (For newer boards like the i945P/G, you may have to edit the info.plist in AppleIntel8255x.kext and add the DeviceID of "0x27dc8086")
    • PRO/100+
    • PRO/100 S Desktop Adapter
    • 82557 EE PRO/100 (Unable to get working)
    • 82557/82558/82559 EtherExpress PRO/100
    • 82540EM Gigabit Ethernet
    • 82547EI/82562EZ
  • LANPRO
    • Model LP-EC100 use Realtek RTL8139
  • Linksys
  • Micronet
    • SP2612R 10/100/1000 Mbps - Works fine
  • National Semiconductor
    • DP83816 "MacPhyter"
  • Netgear
    • FA310 - uses built in DEC 21xx4 driver (specifically "digital" chip)
    • FA311 - May need driver: http://homepage.mac.com/yukidon/mac/en/dp8381x.html EDIT: Works fine for me, no 3rd party driver needed.
    • FA311 (REV A1) - 10.4.3 (8f1099) appeared in preferences but caused machine to hang, then hang on reboot (when initing card ?) - not recommended
    • FA312 - Works like a champ!
    • GA311 Gigabit Ethernet - Works Perfectly
    • RTL8139B/C/D based cards, e.g. D-Link DFE-530TX+ (*not all revisions are RTL8139 based*), Eminent EM 1028, SMC-1211TX (rev. 2) and many more
    • 8169/8169S - Gigabit NIC (Netgear GA311) - (can anyone confirm the 8100S? it's the on-board version of the 8169S) <-8110S detected and configured automatically.
  • Network Everywhere
    • Network Everywhere NC100U-WM
  • OvisLink
    • I don't know the model, in the driver disket I can see 'LFE8139INT', but it is recognized as Realtek RTL8139 Series (like Windows XP). No problems.
  • Realtek
    • Realtek RTL8139 Series (try swapping PCI slot if not recognized)
    • 8100C/810x (reconized as RTL8139)
    • 8100s, MSI 865PE Neo2-PFS (Platinum Edition) on board LAN chip
  • SIIG
    • SIIG USB 2.0 + FireWire + 10/100 Combo, use Realtek RTL8139 Series chip
  • SiS
    • 964 integrated MAC + Realtek 8201BL PHY
  • Surecom
    • EP-320X-R 100/10/M (I have a NE-320X-S and i cannot make it get recognized.. it is supposed to be the same. It uses the fealnx driver in linux.. Don't know in darwin. If anyone knows anything, contact me to pipe752 at gmail dot com)
  • SpeedStream
    • Model SS1019 100mbit1
  • TP-Link
    • Model TG3269 1gbit use Realtek RTL8139 Series chipset

There is some work being done on patching the AirPort drivers to get it to work with cards with a similar chipset. More information may be found below in the Wireless Adapter section.

[edit] Wireless Adapter

  • Asus Wifi@Home PCI card using RT2500 chipset.
  • Asus Spacelink WL-107g Cardbus adapter - needs driver - [2]
  • Asus Spacelink WL-167g USB2 adapter
  • Belkin 54g CardBus Adapter (BCM4306-based)
  • Belkin 54g F5A7010 PCMCIA (BCM4306-based)
  • Belkin 54g PCI Card F5D7000 V2000 (BCM4306KFB - based) - needs patched driver - [3]
  • Belkin 54g PCI card F5D7000 v3000 (Ralink RT2500 chipset) - needs driver - [4]
  • Belkin F5D7050 54Mbps Wireless USB2.0 Adapter [5]
  • Buffalo 54g Cardbus Adapter WLI2-CB-F54L-3 (using patched Airport2 kext)
  • Buffalo 54g PCI Card WLI2-PCI-F54-3 (using patched Airport2 kext)
  • D-Link DWA-131 Wireless USB Adapter Working Perfectly using drivers from D-link support page
  • D-Link DWA-556 Wireless PCI-E 1.0 Adapter Working Perfectly
  • D-Link DWL-G122 Wireless USB Adapter - Hardware Revision B1 only. [6] As of 31/08/05, WEP is stable, WPA is stable with v1.1.1.0 drivers at http://www.ralink.com.tw/supp-1.htm
  • Dell MiniPCI WLAN 1350/1450 Working Perfectly according to Above Post
  • Generic Mini-PCI BCM4306 dfgdgf
  • Gigabyte GN-DWKG USB based on RT2500 chipset. Need driver http://www.ralink.com.tw/supp-1.htm and info.plist edit http://www.win2osx.net/forum/showthread.php?t=2931
  • Hama Wireless PCI based on RT2500 chipset. Runs with STA_2500CardBus driver
  • Hawking Technologies HWP54G PCI card using RT2500 drivers.
  • Linksys WMP54F Wireless-G PCI Adapter (using patched Airport2 kext)
  • Linksys WMP54G Wireless-G PCI Adapter (RT2500 chipset. Runs with STA_2500CardBus driver)
  • Linksys WPC54F Wireless-G PCMCIA Adapter Version 1
  • Linksys WMP11 v2.7 PCI Adapter - Broadcom Chipset (edited Airport2 kext file - add device ID ending with zero)
  • Linksys WMP300N-EU PCI card - Atheros Chipset (Works on iAtkos S3 v2)
  • Linksys WUSB54GC ver.3 Wireless USB Adapter working perfectly. Download USB(RT2870 /RT2770 /RT307X /RT2070 /RT3572) (If you get kernel panic replace included KEXT with the one on this post)
  • Motorola WN825G - Follow instructions here.
  • MSI PC54G2 (RT2560) 802.11g (needs drivers) - [7]
  • MSI CB54G2 Cardbus (RT2500) work fine with driver
  • MSI MP54G4 (RT2560) 801.11b/g Mini-PCI (needs drivers) - [8]
  • OvisLink Evo-WX54USB USB2.0 wireless 802.11g (ralink based)
  • PLANEX GW-NS54G CardBus Adapter (BCM4306-based)
  • RT2500 802.11b/g USB Wireless Chipset (with WEP!) - http://www.ralink.com.tw/supp-1.htm
  • RT2500/RT2560 802.11g CardBus Wireless Chipset (with WEP!) - [9]
  • Realtek USB N 8191SU adaptor. with the Realtek beta driver. http://www.insanelymac.com/forum/index.php?showtopic=187506
  • Sparklan WT-660GS PCI 802.11g (BCM4306-based - needs patched driver - [10]
  • Sabrent Wireless LAN 802.11n PCI Network 300 Mps Wi-Fi Card Adapter - [11] - You'll need to download the Mac driver from http://www.ralink.com.tw - The driver for RT2860 chipset works with this card
  • Most Adapters with Broadcom BCM4306 chipset (Recognised as AirPort) [12]


  • Wireless Bridge Adapters

These adapters work in conjunction with a known x86 compatible lan adapter. No additional driver required.

  • Netgear WGE101 Wireless Bridge.
  • Netgear WGE111 Wireless Bridge.

[edit] IDE

  • Intel 82801BA (ICH2) ATA-100 IDE Controller (rev b1)
  • Intel 82801DB (ICH4) IDE Controller (rev 01)
  • Intel 82801FB (ICH6 Family) IDE Controller (rev 04)
  • Intel 82801FB (915, 925 chipsets) SATA controller: Must be in ATA (not AHCI) mode
  • Intel 82801CAM (Intel 845MP laptop chipset) Ultra ATA
  • Intel 82801EB Ultra ATA
  • Intel ICH5R Serial ATA from 865PE chipset (must be in ATA not RAID mode)
  • Intel ICH5 Paralel ATA from ASUS P4C800-E Deluxe (set compatible mode in BIOS)
  • Intel 82801GB (ICH7) Parallel AT and SATA. Will have to edit PIIX kext file to have you device and vendor ID, but will work fine after.
  • Intel 6300ESB Parallel ATA (SATA not tested yet) on ASUS PSCH-L entry-level server board
  • NVIDIA nForce3 IDE Controller, no SATA (maybe, see: http://forum.osx86project.org/index.php?s=bc2e3d0d6fbce1195bbb30471e650fa8&showtopic=6416) DMA working with modified Kext: http://forum.osx86project.org/index.php?showtopic=593
  • NVIDIA nForce4 2200 IDE Controller, no sata. maybe here? http://forum.osx86project.org/lofiversion/index.php/t3851.html
  • nVIDIA MCP04 (nForce4 Ultra) - Parallel ATA Controller
  • nVIDIA MCP04 (nForce4 Ultra) - SATA Controller (Doesn't work)
  • NVIDIA MCP51 (nForce4 410 + GF6100 IGP) - See http://forum.osx86project.org/index.php?showtopic=4402 for working driver
  • ATI SB400 IDE HDD/CDROM tested only in PIO mode
  • ULi 1695 (only primary channel can work in PIO mode. Stay away from this. It is ultra-slow and slows down the system when IDE has some activity)
  • ULi(ALi) M1689 on ASRock K8 Combo-Z (exactly as above - pri. channel, PIO only. 1.9 MB/s on my 3200+ Venice)
  • VIA VT8237 PATA and SATA works
  • VIA VT8235 PATA works
  • VIA VT6410 Doesn't work
  • SIS 645 (only PIO mode...anyone get DMA working?) -- I'm reading transfer rates in the 25-30MB range on an ATA-100 drive (comparable to data rate with said drive and chipset under Windows), so I think DMA is working. How do you tell for sure?
  • SIS 648FX also only PIO
  • SIS 655FX IDE works but no SATA
  • Promise 378 S-ATA in IDE-Mode (but only the S-ATA part of the Controller works[, like with some Linux Kernels])

[edit] SCSI

  • Adaptec 2940UW
  • Adaptec aha-2940au
  • Adaptec aha-2910 loads the 78xx kext, but works fine with my scanners.

[edit] USB Chipsets

  • Intel 82801BA/DB/DLB/DBM/EB (UHCI) <-- It gives an error of USB over powering and doesn't detect any device. Motherboard: MSI MS-6565, chipset Intel E7205. Advices to pipe752 at gmail dot com
  • Intel 82801GB
  • Intel 82801FB (UHCI)
  • Intel 6300ESB
  • NVidia nForce3
  • Nvidia nForce 150 (OHCI) with ACPI on
  • nVIDIA (nForce4 Ultra) MCP04 - OHCI USB Controller
  • nVIDIA (nForce4 Ultra) MCP04 - EHCI USB 2.0 Controller
  • SIIG USB 2.0 + FireWire + 10/100 Combo, use NEC USB chip

[edit] FireWire Chipsets

  • Agere L-FW323-06 1394 LINK/PHY
  • Creative Labs SB Audigy FireWire Port (Texas Instruments TSB41AB2 Audigy Onboard chip)
  • Ricoh R5C552 onboard controler
  • SII Firewire add in pci card
  • SIIG USB 2.0 + FireWire + 10/100 Combo, use 1394-TI FireWire chip
  • NEC Firewire controller add in pci card
  • VIA VT6306 PCI card (various OEM brands)
  • Texas Instruments OHCI - QPS Que! FireWire PCI Card
  • Texas Instruments 1394 Onboard Control Chip (TSB43AB22A)
  • Texas Instruments OHCI-Lynx on EX-6450
  • D-Link DFB-A5 Firewire / USB 2.0 PCI Card

[edit] Core Logic Chipsets

  • ATI RS480 (extremely slow IDE!)
  • Intel E7205 chipset
  • Intel E7210 server chipset
  • Intel 845/845G/845MP/850E/855GM/865/865GBFL/865PE/875/915P/915G/925X/925XE
  • Intel 945P/G (will need editing of PIIX kexts and 915 ones to include device IDs, though. Otherwise it won't even boot.)
  • Intel 955X
  • nVidia nForce 4 SLI
  • nVidia nForce 4 Ultra
  • NVIDIA nForce 4 410 + GF6100 IGP
  • VIA K8T800(and Pro version)/K8M800/P4M266A/PM800
  • AMD 8151 & 8311 & 8111
  • SiS 756
  • SiS 745

[edit] CPU

include core

SSE3
  • AMD Athlon 64 X2 (All revisions) - Reports only one cpu, shows 2 activity graphs (Correction: Reports 0 cores on die, and 2 logical ones)
  • AMD Athlon 64 and FX (Venice and SanDiego only)
  • AMD Turion 64
  • AMD Opteron (Troy, Italy, San Diego 144)
  • AMD Sempron 64 socket 754 (Some new Palermo revisions do support SSE3 and AMD64, BX (ie- SDA****BXBOX) revision of retail chips, and BX stepping of OEM chips)
  • Intel Celeron D
  • Intel Celeron D 345 j+ (3.06 Ghz)
  • Intel Pentium 4 (Prescott core, 1MB/2MB L2 cache)
  • Intel Pentium D - System Profiler reports one CPU, but activity monitor shows two. Seems to support SMP.
  • Intel Xeon (Nocona, Irwindale)
SSE2 - All SSE2 CPU need a patch for Rosetta
  • AMD Opteron (sledgehammer)
  • AMD Dual Opteron works fine SMP
  • AMD Athlon 64 and FX (newcastle, clawhammer, winchester, barton) barton shouldnt be listed here without SSE2,and earlier FX51/FX53 is SledgeHammer like Opteron - use Maxxuss latest patch: in v0.5c, do not select SSE2 pre-patched binaries in second install screen. XP Barton 3200+ works fine
  • AMD Athlon X2 Dual Core 3800+ Manchester (SSE - SSE2 - SSE3) Works perfectly
  • AMD Sempron socket 754 (K8 based)
  • Mobile Intel Pentium 4
  • Intel Pentium 4 Willamette and Northwood cores (256kB/512kB L2 cache)
  • Intel Pentium M
  • Intel Celeron D (Prescott-256)
  • Intel Celeron M
  • Intel Celeron (Williamette, Northwood, 128kB cache)
  • Intel Xeon Socket-603 (1400DP-1700DP/256L2/400MHz FrontsideBus) - Both, System Profiler and activity monitor shows two CPU's
  • Intel Xeon (P4 based) - System Profiler reports one CPU, but activity monitor shows two.
  • Qemu Virtual CPU 0.7.1 (slow, emulates SSE2/EM64T)
  • Qemu Virtual CPU 0.7.2 (slow, emulates SSE2/EM64T)

[edit] Bluetooth

  • Acer USB Bluetooth Dongle BT500
  • Acer USB Bluetooth Dongle WSU-I
  • Actiontec BTM200B
  • Anycom USB Bluetooth Dongle USB100
  • BlueTake USB Dongle Class1 work exelent
  • Belkin USB Bluetooth Adapter F8T001v2, F8T003v2 and F8T009
  • Billionton USB Bluetooth Adapter USBBT02-B (A Generic Billionton works for me too)
  • Cambridge Silicon Radio (Microsoft USB Bluetooth dongle) (does not work after installing maxxus patch. Anyone knows why?)
  • CNet CBD-021 Bluetooth USB Dongle
  • Conceptronic CBT100U USB Dongle
  • D-Link DBT-120
  • D-Link DWB-120M (The Mac version of the DBT-120)
  • D-Link DBT-122
  • Dell TrueMobile 350 Bluetooth Module (by removing AppleTPM*.kext to enable USB firstly)
  • Dell TrueMobile Bluetooth Module (Inspiron 8600) <-- Please post link or how-to
  • EPoX Bluetooth USB Dongle BT-DG02A
  • Fujitsu/Fujitsu SIEMENS (Connect2Air Bluetooth USB Dongle FMWBA-101)
  • Fujitsu/Fujitsu SIEMENS USB-Bluetooth V2.1 Adapter (Model Number: S26391-F7137-L1)
  • Gigabyte USB Bluetooth Dongle (Model No:GN-BTD01)
  • GlobalSat BTA-804 (if not recognized, re-insert)
  • HP Bluetooth module - Widcomm (HP NX8220)
  • IBM Integrated Bluetooth II
  • IBM Integrated Bluetooth IV
  • InnoVISION Wave Linker USB Bluetooth Dongle
  • LevelOne MDU-0005USB
  • Foston Bluetooth USB Adapter
  • Linksys Class 1 Bluetooth USB Adapter (USBBT100)
  • Microsoft Optical Desktop Elite For Bluetooth
  • Mobile Action MA-700 (USB Dongle)
  • Motorola USB Bluetooth Dongle (SYN0717A) - WauloK
  • MSI Pc-2-Pc Dongle (MSI-6967)
  • MSI Bluetooth Star Hub Full working isync(intel915gav) and Dell 600M
  • Pilotech Bluetooth USB Dongle Model: BU002
  • Sitecom CN-500 and CN-502 USB Dongle
  • Sony Vaio OEM Bluetooth
  • X-Micro XBT-DC2G Class 1 - Work fine, all ok, detect my mobile, GPRS detect but don't work
  • widcomm generic USB bluetooth stick
  • Kensington Bluetooth USB Adapter
  • SMC Bluetooth USB Adapter (SMC-BT10 EU)
  • TrendNet Bluetooth USB Adapter (TBW-101UB serial ends with R)
  • Zonet Bluetooth 1.2 USB Dongle (ZUB6111C)
  • HP NC6000(internal usb)
  • TDK Bluetooth Dongle (Cambridge silicon radio) Plugin and Play!
  • Trust BT1200 USB Dongle
  • Toshiba integrated BT (asus w3v bt chipset)
  • Tecom Bluetooth USB Dongle - works, but activity led doesn't light
  • Yakumo USB Dongle
  • PRODIGY ES-02 USB works

dhdytfi8u...

[edit] Input Devices

PS/2 or USB mice and keyboards work (YMMV) (A suggestion: If PS/2 keyboard does not function, plug in additionally a PS/2 mouse)

  • BTC 8190 PS/2 Magic Key Office didn't work! I have Asus p4p800 any suggestion? Repluging into mice port doesn't work too ports are blocked. Bought USB Keyboard Genius KB-09E it's started immidiatly and work perfect!
  • Generic ps2 keyboard and M$ usb mouse works on my Asus P5GD1-VM.Corona
  • Apple Pro Keyboard (works like it was designed for)
  • Apple Pro Mouse (Optical - works like it was designed for)
  • Apple Mighty Mouse
  • Apple Wireless Mouse (Bluetooth)
  • Razer Diamondback 1600-DPI USB Mouse
  • Creative ProdikeysDM(ps2kb w music kb)& Mouse Optical 5000 (usb to ps2 adapter) on KVM -Noelio
  • Dell PS/2 keyboard (model RT7D20)
  • Dell PS/2 mouse (model MO71KC)
  • Dell USB Quiet Keys Keyboard (model RT7D50)
  • Dell USB mouse (optical, model M-UVDEL1)
  • Evoluent VerticalMouse vmouse1 (USB) - WauloK
  • Happy hacking lite USB
  • Heden PS2 Windows Keyboard
  • IBM scroll wheel mouse (IBM P/N MO28UO; ASM P/N 89P5088; IBM FRU P/N 89P5089)
  • IBM TrackPoint
  • IBM Touch Pad
  • Genius KB-21e Scroll
  • Genius NetScroll+ Optical Mouse OK
  • Keio Optical Mouse (PS/2) (P/N: KOPMPBL913)
  • Keio Mini Optical Mouse (USB) (P/N: KOPMUMN902)
  • Kensington USB mouse (generic ball mouse with scroll)
  • Logitech Access keyboard (PS/2)
  • Logitech iFeel Mouseman (USB)
  • Logitech DiNovo Meida Desktop (Bluetooth)
  • Logitech Cordles Desktop MX (works, but can't load logitech control panel to assign buttons {ECS 915-m5})
  • Logitech G5 wired gaming mouse
  • Logitech Media Play with usb to Ps/2 (Intel 915gav)
  • Logitech MouseMan Traveler
  • Logitech MX310/MX500/MX510/MX518/MX700/MX900/MX1000 (had to direct connect USB port on mx510, using the PS2 adapter will get no response from the installation screen)
  • Logitech Wireless Ergonomic Keyboard
  • Logitech Elite Keyboard (advertised MacOS compatible on box)
  • Logitech Cordless Freedom
  • Logitech Cordless Freedom Optical (kb & mouse using ps2 or usb)
  • Logitech Cordless Desktop LX500, LX700
  • Logitech Marble Mouse USB
  • Logitech PS/2 Scroll Mouse - Wired
  • Logitech UltraX Keyboard
  • Logitech Wingman Cordless Gamepad
  • Kensington Slim Mac keyboard wired, usb
  • Macally usb optical trackball, all buttons
  • Matias Tactile Pro Mac Keyboard wired, usb (All keys work, just a few questions come up during install)
  • Micro Innovations Wireless KB/Mouse -- Volume controls and sleep (power) buttons work, other extra keys have no effect.
  • Microsoft Basic Optical Mouse - Wired
  • Microsoft Intellimouse - Optical USB & PS/2
  • Microsoft Internet Keyboard
  • Microsoft Internet Navigator Keyboard
  • Microsoft Keyboard with Fingerprint Reader, powerbutton and soundbuttons too
  • Microsoft Confort Curved Keyboard 2000
  • Microsoft Optical Mouse 2.0, also sideways scrolling
  • Microsoft Notebook Optical Mouse
  • Microsoft Natural Keyboard
  • Microsoft Natural Keyboard Pro
  • Microsoft Optical Mouse Blue (Wired, USB)
  • Microsoft Standard Wireless Optical Mouse
  • Microsoft Wheelmouse optical
  • Microsoft Wireless MultiMedia Keyboard 1.1
  • Microsoft Wireless Optical Desktop Receiver 2.1 (Surprising thing on this, it works better than in XP, at least for me)
  • Microsoft Wireless Optical Desktop Elite Keyboard/Mouse (USB)
  • Microsoft Wireless Natural MultiMedia Keyboard, Microsoft Wireless Optical Mouse, all on Microsoft Wireless Optical Desktop Receiver 1.0A
  • Microsoft Wireless Notebook Optical Mouse
  • Microsoft Wireless IntelliMouse Explorer 1.0
  • Microsoft Wireless IntelliMouse Explorer 2.0
  • Mitsumi ErgoClassic keyboard OK
  • Packard Bell PB-EWR01 Optical Wireless Mouse
  • PCLine PCL-KBC300 Keyboard
  • Razer Mamba
  • Razer Diamondback 3G
  • Razer DeathAdder
  • Saitek Eclipse keyboard
  • Sony Playstation 2 Official Keyboard and Mouse (with keyboard USB hub)
  • Trust Windows 98 Power Keyboard
  • Trust Slimeline usb Keyboard
  • Trust Wireless optical USB mouse
  • ViewSonic ViewMate USB Internet/Multimedia Keyboard
  • Wacom Graphire(ET) USB Tablet/Mouse
  • Wacom Graphire2 USB Tablet/Mouse - the latest wacom driver is universal binary.
  • Wacom Intuos2 (XD) USB Tablet/Mouse

[edit] Motherboards

[edit] Working Motherboards

Please list the features which are working, not everyone knows these boards:

Brand Model Socket Chipset Working Non-Working Untested
ABit AG8 675 Intel 915P USB, Audio, IDE, SATA NIC
ABit AI7 478 Intel 865PE LAN, SATA, IDE, USB (must select "use OS" for USB mouse and keyboard in Bios), Sound (ICH5), PS/2
ABit AN8 SLI 939 NVIDIA NF4 SLI Sound, PS2, Firewire LAN SATA & SLI Mode
ABit AV8 939 VIA K8T800 Pro + VT8237 USB, IDE, Audio (left channel only), PS/2, IEEE 1394, SATA Gbit LAN
ABit AS8 LGA775 Intel 865PE IDE,USB,SATA,PS/2,Audio Firewire,NIC RAID
ABit BD7 478 Intel 845 IDE, USB, PS/2, Audio (AC97 on mb) SATA
ABit BD7II 478 Intel 845PE IDE, USB, PS/2, LAN, Audio SATA
ABit BE7-RAID 478 Intel 845PE IDE, USB, PS/2, LAN, Audio RAID
ABit BH7 478 Intel 845PE LAN, IDE, Audio, USB
ABit IC7 478 Intel 875P USB, IDE, SATA, Audio, Firewire ACPI
ABit IC7-G Max II 478 Intel 875P USB, IDE, SATA, Audio
ABit IG-80 775 Intel 915G USB, FireWire, Audio, IDE, QE and CG NIC SATA
ABit IS7-E 478 Intel 865PE Everything 3Com Gbit LAN
ABit KV8 754 VIA K8T800 Pro VT8237 USB, IDE, Audio, PS/2, SATA Gbit LAN
ABit NF8 754 NForce3 250 Gb PATA, PS/2, PCI LAN, Firewire Onboard Gbit LAN AC97, USB, SATA
ABit TH7 478 Everything
Albatron PX845PEV 478 Intel 845P IDE, LAN, AC97, USB2
Albatron Intel 845PE Pro IDE, SATA, LAN, AC97, USB2 Onboard Graphics
AMS Ecube EG65 478 Intel 865 IDE, LAN, AC97, USB2, FireWire, PS/2, QE(tricky) Core Image SATA
AOpen i915Ga-PLF 775 Intel 915Ga IDE, SATA, LAN, AC97, USB2, FireWire, QE, and CG Nothing PS/2
AOpen i915Ga-E 775 Intel 915Ga IDE, SATA, LAN, AC97, USB2, QE, and CG Gbit LAN PS/2
AOpen XC Cube Intel 915 Sound, Firewire, USB, PS/2, Graphics (Quartz Extreme, Core Image, & OpenGL work) & IDE works (PATA) Network doesnt work.DVI works at a full 1680 x 1050 on a 20" Apple Cinema Display (via ADC-DVI converter) using the Silicon Image Orion ADD2-N card (HP part #: DY674A) SATA
ASRock P4i43GV IDE, Audio, USB, LAN, Video
ASRock P4VM8 IDE, USB, Video Audio (Left only), LAN (Via Rhine II)
ASRock 775Dual-915GL 775 Intel 915GL IDE, SATA, Audio(require AppleAC97Audio.kext), USB, LAN, Video For QE, delete AppleIntel830.kext
ASRock P4Dual-915GL 478 Intel 915GL IDE, SATA, Audio, USB, LAN, Video
ASRock 939 DUAL-SATA 2 939 ULI M1567 IDE (Only Primary Channel), USB LAN, Audio, SATA, SATA2, UDMA
ASRock 939S56-M 939 SiS 756 USB2, IDE, PS/2 Integrated 10/100 Ethernet, SATA RAID, Audio
ASRock P4I48 478 Intel 848P+ICH5 NIC 10/100, ATA Audio, SATA
ASRock P4i65GV 478 Intel 865G+ICH5 NIC 10/100, ATA, SATA Audio, Graphics generic, requires Ktext Mod
ASRock K-8 COMBO-Z 754/939 ULi(ALi) M1689
Asus A8V Deluxe 939 Via KT800 Pro PATA, SATA, IDE, PS/2, USB, Audio LAN
Asus A8V-E SE 939 Via K8T890 PATA, IDE, PS/2, USB, Audio LAN
Asus K8N-E Deluxe 754 nForce 3 250 GB PATA, USB, PS/2 AUDIO, LAN , IEEE1394 SATA, RAID
Asus P5GD1-VM 775 Intel 915G Sound, LAN, USB, SATA, Native IDE, PS/2 Discrete IDE, delete AppleIntel830.kext RAID
Asus P4C800 Deluxe 478 Intel 875P IDE, PS/2, Audio, USB, FireWire, SATA LAN RAID
Asus P4C800-E Deluxe 478 Intel 875P IDE, PS/2, LAN, Audio, USB, FireWire, SATA (audio:needs fix, see sound) RAID
Asus P4P800 478 Intel 866PE Audio, USB, IDE, SATA, PS/2 3COM Gigabit on-board LAN & Marvell Yukon 88E8001 Gigabit Ethernet On-Board Adapter
Asus P4P800-E Deluxe 478 Intel 865PE All but LAN
Asus P4P800-SE 478 Intel 865PE USB, IDE, SATA, PS/2, soundmax audio (plug spk in MIC plug) 3COM Gigabit on-board LAN.
Asus PSCH-L Intel E7210 LAN, Video, USB, IDE
ASUS PTGD-LA (Goldfish3-GL8E) 775 Intel 915GV SATA, Audio, USB2, Video (QE, CG), LAN
ASUS P5AD2-P 775 Intel 925 IDE, PS2, Audio, USB, Firewire Marvell Yukon 88E8053 Lan IT8212 ATA, SI 3114
Asus A8N5X 939 nForce4 ATA133, USB, PCI-E Gbit LAN, SATA, SATA2 AC97 Audio
Asus A8N-E 939 nForce4 Ultra ATA133, AC97 Audio(requires work to function), USB, PCI-E NIC, SATA, SATA2
Asus A8N SLI Deluxe 939 nForce4 SLI Audio(AC97 guide and also lookup commands to permanently save audio settings I used xplodes guide to set it up), PS/2 OSX keeps giving a 'you need to restart' window on startup if overclocked too high NIC,
Asus A8N-SLI Premium 939 nforce4 SLI ATA133 parallel IDE, PS/2, AC97 requires work to function, USB and Firewire, PCI-E - Starts up and loads very quickly. SATA, Untested
Asus K8N-E Deluxe 754 NFORCE3 250 Audio ok Ethernet
Asus K8N 754 NFORCE3 250 Audio, usb, ide Ethernet, SATA
Asus K8V SE Deluxe 754 VIA K8T800 Audio left channel only (How did you get it to work?) (The K8V Deluxe right below uses the same audio chip ADI AD1980 and its supposed to work. Also compatible under "Sound" is AD1985 which seems close enough. Has anyone managed to get AD1980 to fully work with the K8V SE Deluxe? how?), ?), PATA, SATA Ethernet
Asus K8V Deluxe 754 VIA K8T800 PATA, SATA, Audio works with default drivers (both channels) (how did you get it to work? optical out?) LAN
Asus 845GE-V All works funny in sound. It use AD1980 too, You need load AppleAC97Audio.kext and AppleAC97AudioIntelICH.kext. And the driver use *mic* port to output sound.
Asus A8V 939 VIA K8T800 Pro Via SATA/PATA, USB2.0 full-speed, firewire, Audio Onboard LAN, Promise PATA/SATA
Asus P4C800 Rev. 2.00 (non -E version) USB, SATA Audio 3Com940 LAN
Asus P4C800 Deluxe (non -E version) USB, Firewire, Sound, Intel SATA LAN, Promise SATA
Asus P4C800 Deluxe (-E version) USB, Firewire, Sound, Intel SATA, LAN Promise SATA
Asus P4G8X Deluxe 478 Intel E7205 Audio, USB, Firewire, LAN Silicon Image SATA
Asus P4S800D-E Deluxe SIS655FX SATA, LAN
Asus P4S800D-X SIS-900 Based Fast Ethernet, SIS AC97 Audio
Asus P4S533 SIS645DX Native booting install works with some coaxing, ("Platform=X86PC -x" to install, just platform to boot), USB, IDE1,2, USB, CM8738 Sound, seems reliable (>7hr no problems) LAN
Asus P5AD2-E Deluxe Intel 925XE IDE, SATA, Audio, USB 2.0, FIREWIRE, Prescott Support LAN
Asus P5GPL 775 Intel 915P IDE, Audio, USB 2.0, Prescott Support, additional PCI Adaptec SCSI card detected, additional PCI 3com Eth. card detected, Sun USB Mouse, Logitech PS/2 keyboard onboard GbitLAN not detected Printer driver not tested(should be working), SATA drives not tested (should be working)
Asus P5GDC-V Deluxe Graphics (with QE & CG), Sound (no volume control), Firewire, USB LAN, IDE (ITE) RAID Controllers
Asus P5GD2-X 775 Intel 915P IDE, SATA, Audio, USB 2.0, Prescott Support LAN
Asus P5P800 775 I845PE SATA LAN
Asus P4SE 478 SIS 645 USB, IDE Audio (C-Media 8738)
Asus P4V8X-X 478 VIA P4X533 Sound (single-channel, choppy), Firewire, USB, IDE LAN SATA
Asus P4SD-VX i845PE LAN, Audio, USB, IDE, Firewire
Asus P4PE 845PE LAN, Audio(through mic jack), USB, IDE, Firewaire Promise SATA raid - needs to have Plug'n'play OS turned off in BIOS for sound and ethernet to work plus platform=X86PC
Asus P4TE 478 850 IDE, USB, PS/2, Realtek 8139 Onboard Sound
Asus P4T533 478 850E USB, IDE, LAN Plug&Play OS should be set to NO plus platform=X86PC
Biostar i915G-M7 775 Intel 915G Video (QE, OGL), Audio, LAN, USB2, SATA Flaky KB/Mouse support
Biostar iDEQ 200T P4TBA 478 Intel 865G Video (Intel Extreme Graphics 2, 1024X768, 32b No Acceleration), Realtek RTL8100B LAN, USB2, Mouse/Keyboard, VIA VT6307 Firewire C-Media CMI9739A 6-Channel AC'97 CODEC, Fiber Intel SATA RAID
CFI E-Cube S868A SFF IDE, USB, Ethernet, still fiddling with onboard sound onboard gfx untested - using geforce 5200 on AGP slot
Chaintech VNF3-250 754 nForce3 250 IDE, USB SATA, LAN,Audio
Chaintech VNF4 Ultra IDE, Audio, USB SATA, LAN
DFI LANPARTY UT nF3 IDE, USB SATA, LAN(network you can buy a cheap and simple Realtek), Audio needs to be fixed (AC97)
DFI LANPARTY UT nF4-D 939 nForce4 Ultra IDE, USB, Firewire LAN,SATA and ACPI
ECS 915P-A 775 IDE, LAN (Gbit @ 100Mbit), Audio (24b/192kHz), USB, HT QE, CImg, OGL, Volume, must disable floppy in BIOS for sound to work
ECS 915-M5 775 915G SATA, IDE, LAN, Video (QE+CI, 3D), USB2.0, PS/2 Audio
ECS L4S8A2F 478 SiS 648 IDE, USB2, PS/2, Serial Ports, FireWire Audio, LAN
ECS KN1-Extreme 939 nForce4 Ultra IDE, USB2, Lan, Audio (with a kextload) SATA
ECS NFORCE4-A754 754 nForce4-4x IDE, USB2, PS/2 SATA Audio, LAN
ECS 915-m5 everything including QE+CI ALC880 sound
ECS ELITEGROUP 755-A2 SiS 964 USB, Audio loads but crashes LAN, ps/2(barely works, crashes)
ECS ELITEGROUP 661FX-M Everything else seems to work with a bit of tweaking LAN, Audio, Firewire
ECS K8M800-M2 754 USB so far LAN Still Testing (Video, Audio, IDE, SATA)
ECS 648FX-A SiS648FX USB LAN, Audio, No second IDE
EQS M56K9-MLF 939 ATI Radeon Xpress 200 (RS480) MATX, IDE-133, USB 2.0, PS/2, Serial Ports, FireWire 1394, Audio Realtek ALC655, Realtek 10/100 LAN, Onboard VGA ATI Radeon X300 Sil3112A SATA HDD not detected Still testing more
EQS A58K9-MLF 939 ATI Radeon Xpress 200 (RS480) ATX, IDE-133, USB 2.0, PS/2, Serial Ports, FireWire 1394, Audio Realtek ALC655, Realtek 10/100 LAN, Onboard VGA ATI Radeon X300 Sil3112A SATA HDD not detected in test
EQS M55P9-MLF 775 ATI Radeon Xpress 200 (RS400) MATX, IDE-133, USB 2.0, PS/2, Serial Ports, FireWire 1394, Audio Realtek ALC655, Realtek 10/100 LAN, Onboard VGA ATI Radeon X300 Sil3112A SATA HDD not detected in test
EQS M65P9-ALV 775 ATI Radeon Xpress 200 (RC410) MATX, IDE-133, USB 2.0, PS/2, Serial Ports, Audio Realtek ALC655, Realtek 10/100 LAN, Onboard VGA ATI Radeon X300 Sil3112A SATA HDD not detected in test
EQS A72K9-CF CrossFire 775 ATI Radeon Xpress 200 CrossFire (RD480) ATX, IDE-133, USB 2.0, PS/2, Serial Ports, FireWire 1394, Audio Realtek ALC655, Realtek 10/100 and Marvell 1000 LAN in test in test
Epox 4PDA3I 478 Intel 865PE AUDIO, LAN, USB2, IDE, PS2
Epox 9NPA-J and Ultra 939 nForce4 / nForce4 Ultra IDE, Audio, USB SATA, LAN
Gigabyte 8KNXP Intel 875 SATA, IDE, LAN, Audio, USB2.0, FireWire
Gigabyte GA-8IPE1000 Pro-G 478 Intel 865PE AppleAC97Audio.kext), USB2.0 Marvell Yukon 88E8001 Lan
Gigabyte GA-8I848P 478 IDE, PS/2, USB2.0, Ethernet Some problems whit the Restart funtion, Shutdown works ok
Gigabyte GA-KVT800 Rev. 2 754 VIA K8T800 IDE, PS/2, audio, USB 2.0, ethernet SATA
Gigabyte 8i915P Duo-A LGA775 i915P/i915G Audio, PS/2, USB, SATA, IDE, AGP Built in LAN
Gigabyte GA 8SRX IDE, PCI, USB, Realtek RTL8139 PCI, Matrox G400 AGP dual-head (see VESA graphic cards 'other' above for latest), onboard SB
Gigabyte 8KNXP 478 i875P high CPU usage with Rosetta, poor benchmark results
Gigabyte GA-8I915P DUAL GRAPHIC Socket Chipset USB, Audio, PS/2 SATA, RAID, LAN Untested
Gigabyte K8NXP-SLI 'Everything else Audio, SATA, LAN, RAID
Gigabyte K8VM800M 754 K8M800 SATA, LAN, USB, Audio (Left Channel only)
Gigabyte GA-8IHPX 478 i850E lan, usb ps2 keyboard (microsoft keb.) sound (intel AC'97 audio controler)
Gigabyte 8i915G Duo 775 high CPU usage with Rosetta, - iTunes unworkable, poor xbench results, Take HDD and plug it into a non-Gigabyte board and the problem vanishes, Appears to be BIOS code related
Gigabyte GA-K8NSC 939 nForce3 IDE, LAN, USB2, PS/2 Audio
Gigabyte GA-K8NS Ultra-939 939 nForce3 Ultra IDE Audio, LAN, PS/2 SATA, FireWire, USB
Gigabyte GA-8IDML 478 i845 LAN, UEB 1.1, radeon 7200 recognized as ATI128. Audio(CT5880) USB 2.0
Intel D845PEBT2 478 Intel 845PE IDE, LAN, USB, PS2 SATA, Audio (rear channels, mic input work)
Intel D850GB 478 Intel 850G IDE, Audio, LAN, USB2, PS/2 Everything works!!! Everything works!!!
Intel D865PERL 478 Intel 865PE IDE, Audio, LAN, USB2, PS/2, FireWire SATA
Intel D865PERL (Green version with no LAN) 478 Intel 865PE IDE, SATA, USB2, PS/2, Audio
Intel D865GBF 478 Intel 865G IDE, Audio, LAN, USB2, PS/2, SATA
Intel D865GLC 478 Intel 865G IDE, Audio, LAN, USB2, PS/2
Intel D915GAG(L) 775 Intel 915G Audio, Video, LAN, PS/2, Sata
Intel D915GAV(L) 775 Intel 915G IDE, LAN, Audio, USB2, SATA Audio input
Intel D915GEV(L) 775 Intel 915G IDE, SATA, Audio, USB2, Video (QE, CG), LAN
Intel 915GMHL BTX 775 Intel 915G SATA, LAN, Audio(No input), USB2, FireWire, Video
Intel D915GUXL 775 Intel 915G Everything
Intel D915GVWB 775 Intel 915GV Everything Audio more stable after bios upgrade no input though SATA works WD and Maxtor
Intel D915PBL 775 Intel 915P IDE, SATA, Audio, Network, Sound, USB, PCIe FireWire
Intel 945GCZ BTX 775 Intel 945G SATA, LAN, Audio
Intel D955XBK 775 Intel 955X IDE, LAN, Audio, USB, Firewire
Matsonic MS9107C+ Via P4X333 Audio
MSI P4MAMV (MS-6786 v2.x) 478 VT8751A/VT8235 IDE, USB LAN-Rhine, Audio-AC97(mono only) Video-S3?
MSI 845PE NEO-L 478 Intel 845 IDE, LAN, IDE,USB AUDIO
MSI 865G NEO2-P Intel 865G IDE, Video, Audio, USB, LAN, SATA
MSI 865PE Neo2-PFS (Platinum Edition) 478 Intel 865PE IDE, Video, USB, LAN, SATA Audio
MSI 845GE Max IDE, LAN, Audio, USB Video
MSI 848P Neo-V 478 Intel 848P PATA, SATA, LAN, Audio, USB/USB2
MSI 865GM2-LS IDE, Video, Audio, USB, LAN, SATA
MSI 865PE-Neo3F LGA775 Intel 865PE IDE, LAN, USB, SATA, AC `97
MSI 875P Neo-FISR 478 Intel 875P IDE, Audio, USB, LAN, SATA Firewire
MSI 945G Neo-F 775 Intel 945G PATA, SATA, Video (GMA950, full QE and CI), HD Audio (no input), GigE (needs kext editing)
MSI Neo2 Plat. 939 nVidia nForce IDE, USB1/2, FireWre, Audio (w/tweak), LAN (Realtek) LAN (nForce) SATA
MSI K8T Neo2-FIR 939 Via KT800 IDE, USB1/2, FireWire, LAN, IDE, SATA GLAN, Audio
MSI 915P Neo2 Plat. 775 Intel 915P PATA, SATA, FireWire, HD Audio (no input), GigE (needs kext editing)
MSI 915P Neo2 Plat. 775 Intel 915P PATA, SATA, FireWire, HD Audio (no input), GigE (needs kext editing)
MSI K8N Neo Plat. 754 nVidia nForce3 250Gb IDE, USB1/2, FireWire SATA, LAN, Audio
MSI 915GM4-FI 775 Intel 915G Express / Intel ICH6 IDE, SATA, USB1/2, FireWire, LAN, OnboardGraphics Line-in
MSI 915GLM-v 775 Intel 915 ICH6 Video,CG,QE,Network,Sound,Everything Line-in
MSI RS482M2-IL 939 RS482 IDE, Audio, USB, LAN, SATA Firewire
Shuttle SB61G2 v4 478 Intel 865G IDE, USB1/2, FireWire LAN, Realtek ALC 650, SATA
Soultek SL-K8TPRO-939 939 K8T800 PRO IDE, SATA, USB, FireWire, Sound LAN
Soyo SY-P4VGA 478 VIA P4M266A / 8235 IDE, USB, Sound-mono Sound-Stereo LAN, Onboard Video Card
Tyan Thunder K8WE 940 nVidia nForce4 pro 2200/2250 IDE, USB1/2, FireWire, Audio LAN, SATA PCI-X
Tyan Thunder i860 - S2603 603 Intel 860 - MCH+ICH2+FWH IDE, LAN, Sound, USB, PS/2 SCSI
PCCHIPS M985G 775 Intel 915G Video, LAN, Sata, USB Audio does not work

Although this doesn't belong here but some people insist on it:

The Apple Developer Platform mainboard is a custom made version of Intels D915GUX mainboard with Firewire (optional to the original D915GUX) and Intel 82562EZ NIC chipset (the variant D915GUXLK with Marvells 88E8050 NIC chipset does not have network support in osx). The onboard ALC860 Azalia (HD Audio) chipset is the same as in the devkit but doesn't work for me with osx. Jack sensing doesn't work on the devkit, jack reassign doesn't work too, microphone in doesn't work, headphone out doesn't work, only line in and line out work on the devkit. Power saving will not turn off the cpu fan. The kit is delivered with version 450 of Intels BIOS although Intel offers only version 444 for download, maybe 450 will be a non-public release for apple only.

[edit] Partially Working Motherboards

  • Asus P4S800DX SiS655FX(nBridge SiS655Fx, sBridgeSiS964) -no sound and network
  • Abit SG-71 SIS651 Chipset Board - No Sound -
  • Gigabyte SIS-chipset S478 board (model escapes me) - problems as above. STAY AWAY FROM GIGABYTE FOR OSX86 boxes!! works perfactly on ga-8siml
  • Intel 845BG Desktop Board (6 PCI Slots) (IDE, USB, LAN, Sound all work; PS2 and VGA untested, USB Boot did not work)
  • K8T Neo-FIS2R (K8T800 IDE, LAN, Audio(left channel only) PATA&SATA Firewire and USB2)
  • Mach Speed Viper K8M8M - sound only works left channel.
  • Mach Speed Viper K8M8MS
  • Magic Pro MP-K8AM-G Pro (VGA, USB, Firewire, LAN, IDE works) (SATA, Audio NOT work)
  • Matsonic MS9107C+ Series - VIA P4X333
  • MSI K8T Master2 FAR (ATA,USB,NoLan,MonoSound) eMachines T1740 Motherboard (ATA, LAN, No USB, No Sound)
  • MSI K8MM-ILSR (MS-6741 1.0) ATA, USB OK, all work. AC'97 Audio doesn't work on right channel, No VIA-Rhine LAN, did not test onboard Firewire or onboard video, PS/2 Keyboard didn't work with several models. Seems stable and v. fast.
  • MSI PT 880 NEO (MS-7008 1.0) (ATA, SATA, LAN
  • Soyo 845PE ISA (AC97 audio does not work. Everything else including USB2.0 and on-board networking works, detected and works great.)
  • Soyo SY-P4VTE (No LAN, Audio in 1 channel only with patched AppleAc97Audio.kext from www.osx86filecenter.com)
  • Soyo SY-P4X400 DRAGON Lite (IDE, LAN, realtek 8139, USB, Audio doesn't function.)
  • Shuttle SB83G Barebones - Intel 915 chipset - Sound, Firewire, USB, PS/2, Graphics (Quartz Extreme, Core Image, & OpenGL work) & IDE works (PATA).SATA Untested. Network doesnt work.Internal Wireless Networking doesnt work (at the moment, although it is being worked on).DVI works at a full 1680 x 1050 on a 20" Apple Cinema Display (via ADC-DVI converter) using the Silicon Image Orion ADD2-N card (HP part #: DY674A)
  • Via P4PB 400 Everything but onboard Lan(Via Rhine III)/Audio(AC97) works.
  • Foxconn 915M07-G-8EKRS All work(QE/CG/LAN/SOUND)but 1394 doesn't
  • Foxconn NF4K8AB-RS. Ethernet doesn't work. Haven't tested sound. Boots and runs tho. (WauloK)
  • Intel D875PBZ - OSX is very unstable(5-10 minutes of running at most), can't boot OSX with any usb device plugged in. After it boots i plugg in the mouse. Used with GeForce FX5950Ultra Leadtek.
  • PCCHIPS - M957G Almost work(USB/Sound{mono-left} LAN doesn't work but cheap LAN card add-on PCI can work.did not test on bord Video.
  • WinFast NF4UK8AA-8EKRS - No sound or LAN
  • MSI 915GLM-v Intel 915 ICH6 - No Sound with 10.4.1 or 10.4.3 by default, add AppleAC97Audio.kext driver to make it work.

[edit] PCI PCCARD Adapters

  • Handy for testing out all those different cards with a PC, or if your PCI slots are running out.
  • Avaya ORiNOCO PCI Adaptor
  • Tellus TWL-PCA PCI PCMCIA/PCCARD Adapter - Tested with a 2GB Toshiba PCCard Harddrive and a Toshiba 56k (A.K.A. Psion Gold) Modem and both were automatically recognised and worked fine. Could power cards down and switch between cards without having to reboot.

[edit] PCMCIA Chipset

  • Texas Instruments PCIxx20 Cardbus Controller (specifically the one in Dell 700M) doesn't work
  • Texas Instruments PCI-1410 CardBus Controller (IBM Thinkpad G40) works

[edit] Floppy Drives

  • Sony External USB Floppy Disk Drive MPF82E
  • Sony Vaio USB Floppy Drive
  • Compaq/NEC USB External Floppy Drive (P/N:196666-001 Model:197598-001)
  • Mitsumi USB External Floppy Drive (061M)
  • Iomega Zip 100 USB Z100USBNC (P/N 30220101)

[edit] Incompatible hardware

Please check the Incompatible hardware page for a list of confirmed non-working hardware.


Note: Hardware that is confirmed to be compatible with 10.4.3 should be on the HCL 10.4.3 page. .


This page was last modified on 19 September 2011, at 11:17.
This page has been accessed 1,547,737 times.
Powered by MediaWiki © 2015 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers