This is a hardware compatibility list for portable computers. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying a portable computer. Don't forget to add how you got OSx86 running on your portable x86 computer, and to use proper English. Please see the discussion page for proper instructions on how to input your system specs. Also, please contribute to the HCL 10.4.6 page, which should list a more granular view of compatibility. If your computer isn't listed, you should try it if you have a SSE2 or higher processor. Kernels are available for most configured machines
- ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
- Please add hardware into tables.
- This is for 10.4.6 builds only.
Please list your computers in alphabetical order by manufacturer (Asus, Acer, Dell, HP, etc)
For how to edit the Wiki, please see this thread. Thank you!
See the x86 software page for programs you can run without Rosetta.
 Acer Aspire 1652WLMi
Intel pentium M 740, speedstep working out of the box with 10.4.3, need for ACPICPUthrottle for other versions, ATI Radeon x300 working with koverg's patch for QE and CI, omni's driver for resolution 1280x800, removed mouse tearing using mouse locator, and beam synchro off with the quartz simle program. Intel wireless pro 2200 bg doesn't work so i bought a new mini pci broadcom one... Using Insomniax, so it won't go to sleep. Using new keyboard layout. DVD burner pioneer working flawlessly. USB working well. Dual booting with acronis and also acronis enables usb booting which was not possible with my notebook. What doesn't work: not showing battery status event using modified powermanagment.bundle (no battery detected), PCMCIA, and battery works for about 2 hours and 4 in windows, due to lack of video power savings. When upgrading to 10.4.7, it's going mutch slower. But it's working 2times faster than my xp... . . . .
 Acer Aspire 3004W
- Mobile AMD Sempron rocessor 3100+ 1.8 gHz
- 512 bm ram
- Shared Memory
HOTISO install: After 1 minute apear a Prohibited Icon at the screen... I've tried wait 30 minutes and not work.
 Acer Aspire 3610
- Hardware :
- CPU: Intel® Celeron® M 1.5GHz 1Mb cache, pinmodded to 2GHz.
- Chipset: Intel® 910GML
- RAM: 1 Gb DDR2
- HDD 40 Gb (Samsung) ATA/100
- CD-RW Toshiba 52X CD-ROM, 24X CD-R, 12X CD-RW, 4X DVD-ROM.
- Display 15" XGA TFT LCD max. resolution 1024 x 768 x 16.7 Millions color (Will only give blue screen)
- External Displays (Works Great): Samsung SyncMaster 920NW 1440x900
- Graphics: Intel® Graphics Media Accelerator 900
- Sound: Realtek 16-bit AC '97 (Still trying to fix permissions, .kext errors on boot)
- LAN: Realtek 8139 (10/100Mbit)
- Modem: internal AC97 winmodem (not detected)
- Running MacOSX 10.4.6 with hopes to upgrade to Leopard 10.5.1+
 Acer Aspire 3613LM (3610 series)
- HW configuration:
- CPU: Intel® Celeron® M 1.5GHz 1Mb external cash
- Chipset: Intel® 910GML
- RAM: 512 Mb DDR2
- HDD 40 Gb (Samsung) ATA/100
- DVD-RW Pioneer 24X CD-ROM, 24X CD-R, 15X CD-RW, 8X DVD-ROM, 4X DVD+R, 4X DVD-R, 4X DVD+RW, 4X DVD-RW
- Display 15" XGA TFT LCD max. resolution 1024 x 768 x 16.7 Millions color
- External Displays (tested): LCD Samsung SyncMaster 151p (up to 1024x768), CRT Samsung SyncMaster 753DFX (resolution can be changed up to 2048x1536)
- Graphics: Intel® Graphics Media Accelerator 900 ( QE/CI/Q2E - both supported and works like a charm)
- Sound: Realtek 16-bit AC '97 (works great, internal mic. also work)
- LAN: Realtek 8139 (10/100Mbit)
- >> modem: internal AC97 winmodem (not detected)
- Running MacOSX 10.4.7 upgraded from 10.4.6 (Jas) Installed with external display (dummy device for VGA also helpful)
- --- Works all hardware except internal 56k winmodem.
- --- Pioneer DVD-RW writing supported after installing Patchburn [www.patchburn.de]
- I recommend this notebook for all MacOS X enthusiasts !
Bold text==Acer Aspire 1692WLMi== Running MacOSX 10.4.7 upgraded from 10.4.4. Installing MacOSX presented no issues whatsoever. What works: A lot of stuff including sound, touchpad, all USBs, DVD+-RW, Ethernet Broadcom 5788 (with AppleBCM5701Ethernet.kext patched), Video drivers (ATI Mobility Radeon x700), can watch videos perfectly (DivX, Xvid, WMV). It's really nice having Mac OS X almost fully working now, I have Office, Adium, iLife. What doesn't work: Card Reader, Resolution 1280x800 (really, really a shame), Intel Wifi, Conexant Modem.
 Acer Aspire 1710 Model: DT3
Intel P4 3.4Ghz, Nvidia GeForce GO 5700 128MB, 120GB Hard Drive ISO Used: JaS Mac OS X 10.4.6 with appropriate patches for intel and wireless nic. What works: Sound, Touchpad, All USBs, Firewire, DVD-RW, Wireless NIC (Must change en0 to en1 and Integer 0 to Integer 1), Video using MacVidia 1.0.8 Released Aug 28, 06.
What doesnt work: Onboard Ethernet, Card Reader, Modem(Who cares), Power Management (Sleep Function) . .
 Acer Aspire 3023WLMi
Aspire 3023wlmi ->AMD Sempron 3000 1.80ghz,ATI X200 chipset, 512mb ram, ATI mobility X700 128mb; -VMWare: Works -Native: works only with myzar 10.4.6 DVD
Audio, video and wifi need to be installed seperately, you must disable from bios infrared and usb legancy .
 Acer Aspire 5022WLMi
AMD Turion64 ML-30; X600M 64M 128bit ( Works great woth Callisto & Koverg, CI/QE Supported; S-video not supported; VGA output not supported ) X200M MoterBoard UJ-845S ( Not tested but recogonized properly) Internal Ethernet works perfectly USB & 1394 works perfectly Audio out works properly; Input not supported PCMCIA slot recognized but not tested ( Netgear WG511 not working yet )
Notworking: Modem not detected Card reader not detected IRDA not deceted Wireless Lan card Broadcom 4318: detected as Airport but cannot open radio Built in Blooth not detected ( same problem with Wireless lan )
 Acer Aspire 5612WLMi
- Core Duo T2300 @ 1,66GHz:
Works natively SSE3. 2Cores Okay.
- Video Card (NVidia GM950 graphic):
Works natively. 1280x800 Okay. (But no QE)
- DVD+-R at 8x (HL-DT-ST_DVDRAM_GSA-4082N):
Works natively. Okay
- Network (Broadcom 440x):
Works natively. Okay
Not working at all.
You need to flash the BIOS to 2.10 or a greater version. ( Some notebooks came with BIOS updated. Then you don't need to flash. )
- Battery, you need a fix to show the monitor:
- Azalia Audio HD (Realtek High Definition Audio):
- W-LAN (Intel PRO/Wireless 3945ABG Network):
http://forum.insanelymac.com/index.php?showtopic=36976 ( Intel 3945 [ Latests topics ] )
If you don't want to wait for a stable driver for Intel3945ABG you can follow this topic:
http://forum.insanelymac.com/index.php?showtopic=27919 ( Remember, google is your best friend )
Not working at all. ( Who need this? =P )
- Except for ATI x1600, it's a MacBook Pro at half price.
Xbench=60 (have 1GB DDRII). . .
 Acer Ferrari 3400
Specs: Athlon 64 3000+, 512 MB, 80 GB, ATI Mobility Radeon 9700 Using JaS' 10.4.6 Install DVD. Everything works out of the box except: Sound and Battery Meter. Still haven't figured out a fix to the sound (not detected). Battery Meter can be added by following the 10.4.6 install guide. On first run, wifi is already enabled and detects networks. After restarting it vanishes. Do this to fix it: -Open Terminal -Type sudo nano /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist -Change the line <string>en0</string> to <string>en1</string>. -Change the line <integer>0</integer> to <integer>1</integer>. -Press Ctrl+o, then Enter to save. Ctrl+x to exit. -Reboot -Open Network Preferences. It should detect a new Airport Interface, click Okay. -Click Show > AirPort -Click "Apply Now" Voila.
Video works with QE/CI. Had to force 1400x1050x32 in com.apple.Boot.plist. Note that after doing this, some distortion appears. Mouse flickers slightly, and when windows are moved or scrolled, they're completely distorted. You can make the windows re-appear by minimizing and reshowing them. Also, hitting F9, F10, or F11 twice (transition and back) will not only restore the windows' appearance, but prevent them from getting distorted again until they're closed. DVD�R/W/RAM drive can read CDs and DVDs with no issues. Is detected as a burner, but can't burn.
 Acer Travelmate 660/661
Running MacOSX 10.4.6 upgraded from 10.4.5. Installing MacOSX presents no problems. After installation some hardware doesn't work correctly. Needed patches are: ACPIThrottle 1.0 for ACPI power management, edit boot config file for 1280x1024 VESA resolution (no QE/CI possible yet), custom AC97 sound driver, custom PowerManagement bundle to show battery status. AMR Modem and Intel WLAN NOT working, no patches available. Otherwise full functionality.
 Acer Travelmate 3002
Pentium M 740 Chipset, 1.7Ghz with SSE2, 1280 DDR2 Ram
Notes: Using JaS' 10.4.6 Install DVD. Not very successful. Setup was very picky to get up and running due to HDDs partition setup.
Working: Video (External Monitor via VGA Output only); Firewire(External DVD Combo Drve); Bluetooth; USB... Not Working: Audio; Wifi (Intel 2200BG); LAN; Modem; ACPI Battery/Sleep Functions... Not Tested still: DVD Burner, Laptop Function Keys
Perfect installation. no LAN, Modem, Wireless .
 Acer Travelmate 2410
Everything works except modem, which is not recognised at all. And sleep
Needs two-wire paperclip dongle for internal display (initially, you need to press Fn-F5 twice during the grey apple-screen, otherwise the picture will be on the external display)
Battery status works with the customised PowerManagement.bundle.
Internal Atheros AR5005g WiFi card works and recognised as an AirPort card after switching the IO80211Family.kext in your System/Library/Extensions folder with one extracted from the "Mac OS X 10.4.5 for Intel" updater from Apple (There was a thread about this on Insanelymac somewhere...)
 Acer Travelmate 292LMi
Working native install using JaS' 10.4.6 Install DVD: USB - mouse + external card reader; FireWire; Network; DVD-Dual drive - burning is working with Toast and DiscBlaze; Sound working but "No information found."
System Profiler - shows:
Machine Name: jMac Machine Model: ADP2,1 CPU Type: Intel® Pentium® M processor Number Of CPUs: 1 CPU Speed: 26.45 GHz L2 Cache (per CPU): 2 MB CPU Features: FPU VME DE PSE TSC MSR MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT CLFSH DS ACPI MMX FXSR SSE SSE2 SS TM EST Memory: 512 MB Bus Speed: 533 MHz Boot ROM Version: V2.00 (ACER)
About this Mac shows that the Processor 4.30 GHz Intel® Pentium® M Battery status works after some changes made! Not working: WiFi 2200, Infrared, After suspend or hibernate the computer does not start. Display:
Type: VGA-Compatible Controller Bus: Built-In VRAM (Total): 128 MB Vendor: Intel (0x8086) Device ID: 0x3582 Revision ID: 0x0002 Kernel Extension Info: No Kext Loaded Displays: Resolution: 1024 x 768 Depth: 32-bit Color Core Image: Not Supported Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported
 Acer Travelmate 4002WLMi
Intel 855 Dothan 1.6 2Mb; Mobility 9700 64 Mb; Broadcom 44xx AC97 Audio
All ok but wireless(iw2200) as expected, got coregraphics and quartzextreme little glitches in rendering
Res@1280x800x32, native widescreen res.
 Acer Travelmate 4050
CPU: Intel Centrino (Pentium M) 1.6Ghz (2MB Cache) Ram: 256 Standard (mines upgraded to 768Mb) GFX: Intel 82855GME LAN: Realtek RTL8139 WiFi: Intel iw2000 Series CD/DVD: QSI CDRW/DVD SBW242C Sound: Realtek AC97 Audio USB: Intel 82801DB/DBM USB2 Modem: Agre Systems AC97 Modem IrDA: SMSC IrCC - Fast IR PCMCIA: ENE CB-1410/815 Cardbus Controller
I Used the JaS 10.4.6 OSx86 Install DVD rom, booted up fine, Sound worked great, Touch pad worked (though tap to click diddnt) Both 'mouse' buttons worked fine..
EVERYTHING Worked except the WiFi (to be expected, im looking for a driver for it though), the GFX worked, though there was no 3D acceleration options, and no Quartz Extreme etc...
I did not try the firewire, or the Infra Red, the Cardbus (PCMCIA) was aparently installed and working (System profiler said so atleast) the USB worked, and everything else was fine, even the lan and standard Modem were detected, and worked...
Installed without a hitch, Installed the Intel Patches that were on the JaS DVD, Diddnt need to pre-partition using a BSD Live CD or anything like that, Just partitioned via Disk Manager during isntallation...
Guest comment:During the Custom Install phase, what packages did you install (i.e. the Checkboxes that you've clicked)?
 Acer Travelmate 4672WLMi
Laptop Specs: (from label on box)
CPU: Intel Core Duo T2300 (1.66 MHz) LCD: 15.4" WXGA TFT RAM: 1024MB DDR2 HDD: SATA 120GB Card Reader: 5 in 1 Card Reader Optical: DVD - Super Multi Modem/Lan: 56k, 10/100/1000 Base T Wireless: Intel PRO/Wireless 3945ABG
Native install with JaS 10.4.6 DVD.
Working: Video (Intel GMA950), Wired NIC (Broadcom NetExtreme Gigabit), DVD Burning, USB, Sound (ALC882), Synaptics touchpad, Sleep function
Not Working: Wireless NIC (Intel 3945ABG)
Not Tested: Firewire (no devices to test), Media Card Reader (no compatible media cards), Infrared
Hardware Overview: Machine Name: jMac Machine Model: ADP2,1 CPU Type: Genuine Intel® CPU T2300 @ Number Of CPUs: 2 CPU Speed: 1.6 GHz L2 Cache (per CPU): 2 MB CPU Features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT CLFSH DS ACPI MMX FXSR SSE SSE2 SS HTT TM SSE3 MON VMX EST TM2 TPR Memory: 1 GB Bus Speed: 667 MHz Boot ROM Version: v1.3221 (Acer) Serial Number: xxxxxxxxxxx <-- I blocked this out
GMA 950: Chipset Model: GMA 950 Type: VGA-Compatible Controller Bus: Built-In VRAM (Total): 256 MB Vendor: Intel (0x8086) Device ID: 0x27a2 Revision ID: 0x0003 Displays: Display: Resolution: 1280 x 800 Depth: 32-bit Color Built-In: Yes Core Image: Supported Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported
The Intel wireless did not work, but I was able to install a D-Link DWL-G122 USB wireless NIC using the Ralink drivers. Video works flawlessly including res change. Sound did not work out of the box, but I got it working very easily using this small hack.
 Acer Travelmate 8006LMi
Intel Pentium M 755 processor (2.0GHz, 400 MHz FSB, 2MB L2 cache) Intel 855GME chipset Intel PRO/Wireless 2200BG (802-11b/g WLAN), Wi-Fi, WPA support 200-nits 15" SXGA+ TFT LCD ATI Mobility Radean 9700 3D Graphics/128MB VRAM 512MB DDR 80GB Ultra ATA/100 HDD DVD-Super Multi Gigabit Ethernet
Jas 1.4.3 Installation for Intel
Installation worked fine. OSX worked but did not recognize sound, internal keyboard, mouse, nor any network connector (possibly with the exception of the phone modem which I didn't try).
 Asus A2000Series (A2C)
Intel Pentium 4 2,800GHz (SSE2, PAE) 512RAM (256MB Base) Ati Radeon Mobility 9600 64MB, Audio AC97, Ethernet SiS.
Installed with 10.4.6 boot -x after installation video card boot in native;
Audio: AC97 ID:7012 Work with ;
Video: Work QE/QE2D/CI OpenGL with CallistoBuild005 and AGPGart ;
Ethernet SiS900: Does not work (incompatible harware);
USB: Work but no mouse usb;
 Asus A3A 5012
CPU: Intel Pentium M 1,7 GHZ (sse,sse2) Video: Intel GMA9xx Audio: standard ac97 Everything works, except the internal wifi card. Quartz Extreme works. You just need the 2-wire trick to boot the installation dvd. You will not get the battery monitor or other laptop power saving features, but who cares :). Details: Video: Quartz Extreme works. Audio: output works great, no input Network: internal ethernet works, no wifi (the a3a has an intel 2200 which is not supported) Firewire: works Usb: both 1.0 and 2.0 works Card reader: doesn't work Pcmcia: I don't know, haven't got any pci card :)
 Asus A6770 KLHa
Turion 64 MT-32 (1.8 GHz, SSE3, NX, PAE), 1024MB Ram (512MB Base), NVidia GeForce 6200 TurboCache 128 MB, Audio SiS7012 on-board ac97 codec, WiFi BCM4318 (Untested but appear in network list).
Firewire, trackpad, USB, audio, wifi and Ethernet Works.
2D Graphic work, using NVDriverBeta2Build2 driver of macvidia, 1280x800 native resolution.
 Asus A6Jc
-Intel Core Duo T2300 (1.66 SSE3)
-1024mb Ram DDR2 PC2-4200
-NVidia GeForce Go 7300 128mb(1280x800 not supported)
-On-board Intel High Definition Audio (not working)
-Intel Pro Wireless 3945 a/b/g (not working)
USB and touchpad are working. Cam and SD card reader are not.
I have some other experiences:
- NVidia GeForce Go 7300 - working (1280x800) with MacVidia driver, although no QE/CI
- On-board Intel High Definition Audio - working with AppleHDA.kext available on forum
- Realtek 8168 - not working. I have contacted Realtek support about this card and they said that they will develop a driver as soon as Apple will use PCI-E bus in their computers.
- Fixed by RTL1xxx_1.02.pkg. After installation you can use it properly.
- Fixed by RTL1xxx_1.02.pkg. After installation you can use it properly.
Just remember that it's better to input WIFI Shared Key in hexadecimal not ASCII
--- Tealc said: try and use Pentoo Linux LiveCD on this A6JC, I've got no problem with the hardware, the site is http://www.pentoo.ch/-PENTOO-.html use the 2006.1 version!
 Asus A7JC
Installation went smoothly, the hard drive was recognized perfectly. I used grub for trial boot Windows Media Center / Slackware / OSX86
Processor: Intel Core Duo 1,6 ghz (Works perfectly with sse3 enabled)
Graphic Card: Mobility x1600 (works only on external monitor with boris method, with callisto 003 the system hangs on resolution change, with osx86 ati drivers you can get max 1152x864 resolution by editing Boot file)
Hard disk: Fuijtsu 100 GB SATA (works 100%)
Sound: Realtek ALC882 (Works with 10.4.3 kext, no lineout and volume control)
DVD-RW: TSST CORP TS-L532M (Recognized perfectly, I didn't try dvd/cd burning yet)
Wired Network Card: Realtek 8168 PCI-E (working with installer realtek 8168/8111)
Wireless Network Card: Intel 3945abg card (not working but you can exchange it with a working card)
Touchpad: Synaptics PS2 touchpad (works 100%)
Integrated Cam & Mic: (not working)
MMC Reader: (not working)
Integrated Bluetooth: Toshiba Bluetooth module (works 100%)
Integrated TV tuner: Avermedia m115 (not working)
 Asus A8Jp
Installation Goatsecx 10.4.4 with Updates to 10.4.6
Partition with Acronis Disk Director, Format HFS+ with HDUtil during Installation
DualBoot; first Partition Tiger, second and third NTFS
Processor: Intel Core 2 Duo 2 ghz
Graphic Card: Mobility x1700 (works only 1024x768)
Hard disk: Fuijtsu 120 GB SATA (works 100%)
Sound: Intel 82801GBM ICH7-M (Works with modifikations)
DVD-RW: HL-DT-ST DVDRAM GSA-T10N (Recognized perfectly)
Wired Network Card: Realtek 8168 PCI-E (working with installer realtek 8168/8111)
Wireless Network Card: Intel 3945abg card (not working but you can exchange it with a working card)
Touchpad: Synaptics PS2 touchpad (works 100%)
Integrated Camera: (not working)
SD/MMC Reader: (not working)
Integrated Bluetooth: Toshiba Bluetooth module (works 100%)
 moved to 10.4.8 Jas 10.4.8 works...;o))
 Asus M6N
Installed with Jas 10.4.6 DVD and... network card (Broadcom NetExtreme Gigabit) works with some workaroud (search in forum), sound works with workaround (search in forum), graphics works up to 1400x1050x32 with some scratch near mouse. I thinks wireless Intel Pro/100 works with workaround (i hano no solution until now).
 Asus M6Va
Processor: Intel Pentium M 750 1,86GHz (works)
Graphic Card: ATI Mobility X700/Device ID: 5652 (QE/CI and 1280x800 works with Callisto 006 fixed by OVOF)
Hard disk: 80 GB PATA (works)
Sound: Realtek ALC861 HD-Audio (works)
Wired Network Card: Marvell Yukon 1Gb network (working with http://forum.osx86project.org/index.php?showtopic=15700)
Wireless Network Card: Intel 2915ABG card (not tested)
Touchpad: Synaptics touchpad (works)
Integrated Mic: (not working)
SD/MMC Reader: (not tested)
Bluetooth: Toshiba Bluetooth Stack (no tested)
Used 10.4.6 JaS DVD
 Asus F3JM-AK005H
Processor: Intel Core Duo T2500 2Ghz (Works perfectly with sse3 enabled)
Graphic Card: Nvidia Geforce Go 7600 (working with MacVidia driver Resolution 1680x1050x32@60 QE/CI and Natit/Titan not work because of 512Mo VRAM)
Hard disk: 120 GB SATA (works)
Sound: Realtek ALC861 (Not Works again)
Wired Network Card: Realtek 8168 (working with R1OOO driver )
Wireless Network Card: Intel 3945abg card (not working)
Touchpad: Synaptics PS2 touchpad (works)
Integrated Cam & Mic: (not working)
MMC Reader: (not working)
Integrated Bluetooth: (working : No testing yet)
NOTE : Works with 10.4.6, 10.4.7, 10.4.8 and 10.4.9 too.
 Asus S5000n/s5n
pent M 1.5Ghz, intel 855gme, intel 2200bg, ac97 audio, 1394, usb2, aclink v90.92 modem, eth0 10/100 realtek?, pci card, sd/ms/mmc, external asus dvd/cdr, trackpad. hotiso 10.4.6 install w/ intel, sse2, wireless. changed disk to active using fdisk and booted right into osx. as far as i have tested: NOT working : 2200bg, aclink modem, pci cardbus, memreader. will post changes as I get further.
 ASUS VX2
Intel Core2Duo T7400 2.16GHz, 2GB RAM, nVidia GeForce 7700, Realtek 8111B/8168B, 1394, USB, Motorola SM56 Data Modem, SD/MMC/MS Card-Reader, Trackpad, Bluetooth ISO: 10.4.6 HotiSO. Install with IntelSSE3 and Intel package. Didnt install wireless, so I cant test the WLAN. Setted disk to active with Vista Utility "diskpart" and dual-booting Vista via Darwin bootloader.
- Working w/o modifications: CPU ;), Bluetooth, 1394, USB and the Trackpad.
- Working w/ modifications: Realtek 8111B(Wired Ethernet) and GeForce 7700 at native res (1680x1050).
- Doesnt work: Analog Devices SoundMAX Audio, Wireless, Card-Reader and Data Modem
Will test further and post updates, so stay tuned.
 ASUS W3V
Specs: Intel Pentium M 770 (Dothan 2.13 Ghz v2 Sonoma) SSE2, 533 MHz bus, 2MB L2, 2GB DDR2 533Mhz, 80GB 5400rpm Samsung, ATI X360 128 MB, 14.1 Inch LCD 1280x768, Bluetooth, Intel 2915BG Wifi, Flash memory reader, DVD +-RW Dual Layer, Firewire 400.
Used Jas 10.4.6 ISO, Dual booting XP via Darwin. Did not need VGA short.
Works From Scratch: CPU @ 2.13Ghz, Graphics adapter, LCD*, trackpad, keyboard, audio*, USB, Firewire, DVD drive, LCD brightness F keys
Works With Help: Marvell Ethernet (http://forum.osx86project.org/index.php?showtopic=15700),
Does Not Work: Bluetooth, Intel 2915BG Wifi, flash reader, Volume F keys
Not Sure Works: Speedstep,
- Sort Of Works: LCD only displays 1024x768. Tried Callisto_b008, but it froze the system. I think I followed his instructions correctly, but not 100% sure. Audio volume is a problem on W3V's, generally too low on XP. Same, if not worse, on OS X.
 Asus W7J
Using 10.4.6 Jas patched update to 10.4.7 with Jas patched for intel(same with Myzar and Goatsecx)
Intel Core Duo T2400 1.83Ghz (working 100%)
Hard driver (working 100%)
TouchPad (working 100%)
USB2 (working 100%)
CD/DVD (working 100%)
FireWire (working 100%)
Graphic card Nvidia Geforce Go7400 worked with Macvidia driver V1.0.8 no QE/CI yet,resolution 1280x800x32@60.
Bluetooth Broadcom 2045 (working 100%)
Sound Realtek ALC861 worked with Azilia kext but no line in, no volume control
Network card Realtek RTL8186 PCI-E not working.UPDATED work with http://forum.insanelymac.com/index.php?showtopic=29436&hl=RTL8111b thanks DeamonES and NeoPheus for installer
Wireless Intel 3945ABG not working
Camera built-in (SN9C203) work with Sonix's driver (SN9C20x) get from http://www.sonix.com.tw
Card reader not working
Express Card not tested
 Asus Z33a
Using JaS 10.4.6 release.
[Supported] Pentium M compatible
[Supported] Intel 915GM chipset
[Supported] 12.1" LCD (1024x768)
[Supported] GMA900 type Video
[Supported] 3 x USB 2.0
[Supported] 1 x FireWire 400
[Broken] Intel 2200ABG WiFi does not work at all
[Broken] Sound does not work at all
[Broken] Sleep loose USB on awake - reboot to regain control of USB devices
Boot from LCD screen by pressing FN+F8 during boot sequence.
Do not boot OSX from battery otherwise the UI will be very slow to react.
My particular machine experience short locks everytime I type a special character (using Canadian French keyboard).
 Asus Z63A
Specs: Intel 735 overclocked to 2.26GHz, 1GB PC5400 GSkill DDR2, 120GB Seagate 5400 HD, Intel 915G Graphics, Atheros AR5212A B/G Wireless, Marvel Yukon GB Network.
Using JaS' 10.4.6 Install DVD.
You must use the exteral VGA short or the DVD will not boot. I used a trimed down paperclip to short pins 2 and 12 on the external VGA connector (http://forum.osx86project.org/index.php?showtopic=14902&hl=paper+clip). The installation works perfectly most onboard devices are detected and work right out of the box. This includes the LCD screen, keyboard (widows key and alt key need to be switched), and trackpad. The built in Marvel networking card is now supported with this driver (http://forum.osx86project.org/index.php?showtopic=15700). ACPI support for the battery and battery mode can be found here (http://forum.osx86project.org/index.php?showtopic=14912&st=0). The LCD brightness function keys work, volume keys do not, others have not been tested. As i only have a Z63A i was unable to test Bluetooth support. Speedstep is still not working but they will get it soon :)
 ASUS Z81K
Dual Boot (WinXP Professional 32Bit/OS X 10.4.6 Goatsecx w/10.4.7 AMD Update and JaS 10.4.8 AMD SSE2/SemtheX Beta9 (8.8.1) using Acronis OS Selector
ASUS Z81K (nVidia nForce3 Go150 aka Crush K8M) | AMD Mobile A64 3400+ w/1MB L2 | 15.4" WSXGA+ | ATI Mobility Radeon 9700 Pro w/128MB DDR (1680x1050@32 via Callisto's b03/joblo10's AGPGart w/QECI supported and mouse tearing handled by Mouse Locator) | 1GB Muskin SO-DIMM DDR 3200 | TOSHIBA MK6026GAX 60GB 5400RPM 16MB Cache ATA-6 | TSSTCorp 8X +/- DL DVDR/W | nVidia nForce AC97 Audio | Marvell Gigabit LAN | USB WLAN 802.11G (SIS162) - not working in OS X | Ricoh 4-in-1 Memory Card Reader (SD/MMC/MemStick/MemStick Pro) - not working in OS X | AC97 SoftV92 Data Fax Modem - not working in OS X | 4x USB2.0 working through non-log version of 10.4.7 IOUSBFamily.kext 2.5.6
Installation process goes through without an issue. Once at desktop install Callisto's b03 (found here), edit the ATIRadeon9700.kext with the device id 4e50 (there's two places where the 9700 id appears) and replace IONDRVFramebuffer <string> value with CallistoFB. Before rebooting install the newest AGPGart from joblo10 (found here), delete extensions.mkext and extensions.kextcache, repair permissions and restart. All resolutions and QE/CI functional after these actions. Thereafter to deal with the mouse tearing I suggest using Mouse Locator (details here). USB 2.0 fixed via these steps.
 Asus Z96Js
Specs: Intel Core 2 Duo T7200 (Merom) 2.0Ghz 4MB L2, 1GB G.Skill 667Mhz DDR2, 100GB 5400rpm Seagate Momentus, Intel mobility radeon X1600 Used Jas 10.4.6 Install DVD without complications. Booting with Grub. Bluetooth is recognized, will update more as soon as everything is tweaked out. Ethernet working. Sound (laptop speakers only). 1400 x 1050 resolution. (Native of LCD is 1680 x 1050)
 Averatec 3700 series
AMD Sempron processor
Installation with 10.4.6 iso was fine. Wireless works if you download the os x drivers from RAlink's website and install them. You might have to install the drivers by making the Installer program run via rosetta. Did not think it would be that simple. Sound works after changing settings in Audio MIDI setup (left speaker only). Volume controls do work. Use the pinxue rhine driver to get wired ethernet working. To get USB fully working, download IOUSBFamily-256.4.2(Intel)-log.dmg from the apple developer website. Make sure to get the correct matched version. Everything looking pretty good except for the video currently.
 Averatec AV 1050 (UU1)
Pentium M ULV 733 Chipset, 1.1Ghz with SSE2, 512MB DDR Ram
Notes: Using JaS' 10.4.6 Install DVD. Installed easily from Booting DVD onto several existing partition layouts.
Working: Video (in 1024x768, not ideal 1280x768 WS); Audio; LAN; USB; Bluetooth (not internal, using Generic Acer Bluetooth Stick)... Not Working: Wifi (Intel 2200BG); ACPI Battery/Sleep Functions (HDD Does powerdown but not screen)... Not Tested still: Firewire; DVD Burner; Modem
 BenQ Joybook s52
Pentium M 1,73 GMA900
wireless and audio built in (i used a Soundblaster Audigy NX2 USB to listen to sound) and battery(i didn't try any fix) don't work. Problem during installation and OS's boot(it's necessary to plug an external monitor to permit the system to boot).
Comment:very nice good performace(no problem with 720p H.264 playback), very slow (xbench) compared to new macbook!No stability problem!
 Clevo M570A
Pentium M (Dothan) 2.13 GHz with SSE2
Intel 915PM + ICH6-M
2GB RAM, 100GB SATA HD
NVidia GeForce Go 7800 GTX
Intel Azalia compatible sound
Installed using Jas' 10.4.6 ISO, updated immediately to 10.4.7.
CPU: running at 800 MHz, after installing ACPI kext 2.13 GHz
Keyboard: type detection failed, but keyboard works
Touchpad, Bluetooth, USB, IEEE1394: works
Graphics chip: works using MacVidia driver Beta 2 build 2, resolution 1920x1200x32, no CI/QE, but usable
Audio: detected as Apple HD Audio, no additional info, only output. Latency very low in GarageBand.
Intel 2200 WLAN: doesn't work.
Standby available, but display refuses to switch on after wakeup
DVD-ROM: works, burning not tested yet
 Compaq Presario 1500T
Pentium 4 2.0Ghz with SSE2, 1GB RAM, 30GB HD. Everything work except the following.
ATI Radeon Mobility 7500: current driver works but uses 10.4.1 GL driver in order to get GL to work. AC97: uese the patch in order for audio to work. W200 wireless: Not working. Uses Airlink wireless PCMCIA card and it work. Power Management: Not working even when using the patch.
 Compaq Presario M2000
Celeron M 1.6G/256M DDR/40G 5400rpm/GMA 900
Work: Audio Firewire USB Hotkeys for volume Combo Driver
Not Work: SD/SM/XD/MSD Card Reader
Tested with 10.4.6 JAS
To enable QE,you should install GMA900 driver by your self from Install DVD.
Tested and working 100% with JAS 10.4.6 install DVD (Compaq m2000 celeron m 1.3). Choose customize when installing and select GMA900 + SSE2 patch + wireless adapter driver. Only card reader doesnt work. OS X runs beautifully on this machine!!!
Works completely with 10.4.6 JAS. Make sure to custom install and select the patches: 10.4.6 Combo Update Intel Base system + SemJaza v1.2 Decrypts, GMA900, sse2 patch, and wireless adapter driver. DON'T FORGET TO ACTIVATE BOOT FLAGS FOR YOUR PARTION!
 Compaq Presario V2000
Intel Celeron M 1.5Ghz, 256MB RAM, 40GB HD. Everything work except the following.
ATI Radeon Mobility 7500: current driver works but uses 10.4.1 GL driver in order to get GL to work. AC97: Not Working. W200 wireless: Not working. Uses Airlink wireless PCMCIA card and it work. Power Management: Not working even when using the patch.
 Compaq Presario V2305CA
AMD Mobile Sempron 3000+, 256MB RAM, 40GB HDD.
ATI XPRESS 200M: Callisto drivers resulted in blank screen. Could not get any resolution other than 1024x768. Touchpad/keyboard: Would only work with IOUSBFamily.kext completely removed (no USB at all). Conexant AMC Sound: Could not get to work (audio family drivers depend on USB, apparently). Wireless: The system ran incredibly incredibly slow unless wireless was disabled in the BIOS (MiniPCI, perhaps?) so that was a no go. Realtek 8139 NIC: Worked fine.
The system ran and with decent performance. Without CI/QE and a working video driver the display performance left a lot to be desired. Without wireless and sound, however, I'd be hard pressed to call the install a success.
 Compaq Presario V3016US
Core Duo 2050 1.6G/512M DDR/80G 5400rpm/GMA 950
Installed with no problem. Did not need to disable 1 core. Running at native correct resolution 1280x800 without any tweaks USB works Hotkeys for volume seems to work because Mac OS displays icons when pressing those keys, but Audio itself does not work DVD burner seems to work
Not Work: SD/SM/XD/MSD Card Reader NIC or Wireless network card (an intel card) don't work. Audio not working, did not test Firewire. System seems to be running stable. I believe Audio can be fixed to work.
 Compaq Presario V40002
10.4.6 Install DVD (Upgrade) after Jas 10.4.3 Install DVD
CPU: Intel Celeron M (1.5 GHz, 1.6 GHz Bus Speed reported from Profiler)
Graphics: 1280x800 Working with Quartz Extreme ( with dongle after Quartz Debug toggle )
Ethernet: Working ( perfect )
Audio: Working ( AC97 permissions fix )
Wireless: Working ( 1080211Family.kext and AppleAirPort2.kext fix )
DVD: Working ( perfect )
USB Wireless Modem: Working after Novatel720.dmg ( Sprint Novatel U720 )
Trackpad: Working ( perfect )
USB Wireless Mouse: Working ( Kensington Ci65m )
Keyboard: Working ( perfect )
Battery Indicator: Working ( PowerManagement.bundle fix )
 Dell Inspiron 1100
OSx86 10.4.6 Native with Multiboot Boot to Windows XP Pro. Install windows first and the OS selector. Then boot to OSx86 DVD. Not very hard.
Had problems with the first install becuase I couldn't see what I was doing, the picture was all messed up. If you are having this problem go into your BIOS and switch the video memory from 1MB to 8MB. If you are unable to do this then it is time to update your BIOS.
Took a while to figure out how to get the sound working. Search in Google for Sigmatel osx86, found insructions in the Forum that way. Ethernet was working already. Video worked as soon as I switched to 8MB in the BIOS. CD/DVD drive worked without a mod.
 Dell Inspiron 1100
512Mb RAM (Disconnected Internal Modem) (UK Model)
OSx86 10.4.6 Native (HOT OSX TIGER 10.4.6.DMG)
Did not bother with XP, complete 40G Partition setup for this OS X install, on setup choose sparingly with all settings, the less you choose the more likelihood of success, this took me 8 evenings after work to finally get to boot up, I did not select sound or vga during install/setup, the install came out with sound drivers working and video operational along with RJ45 Network to local home network.
Apple Network configured for $16 USB WIFI (Tenda 802.11 N) Application is solid and fast, much faster than XP Home, so all in all a good weeks worth of your time, if you can be bothered.
NOTE: Do Not try to update OS X or you will end up with a non-booting system, this wipes out the Kexts.
 Dell Inspiron 1300/B130
-OS: JaS 10.4.6 Native w/ Dual boot XP (needs VGA dongle)
-Intel Celeron M 1.5ghz (400mxz FSB) o/c to 2.0ghz (533mhz FSB using pin tweak), 768mb RAM
-(Working:)Wireless, QE, CI, ACPI functions with patch on forums, LAN, keyboard/touchpad
-(Not Working:) Sigmatel 9200 sound, waiting for drivers to be written.
Dell Inspiron 1300/B130 OS: JaS 10.4.6 Native with dual booting to win XP, (Needs to be connected to screen to boot OSX) -Intel Celeron M 1.6ghz (400mhz FSB) Mac overclocks the processor to 2.13ghz (533mhz FSB), 512mb, Processor fan turns on and off as it should, Wakes up from Standby and Hibernate, Batterylife with 4cell battery About 1hour30min to 2hours. All Resolutions supported, No QE or CI with the GML900 patch i got via the DVD. (Fixed, Ive got QE and CI working with some help from the forum ) (No sound with Sigmatel 9200, needs a new driver) All FN controlls work, keyboard and Trackpad works.
Hardware: Intel Celeron M 2.1gHz | 1GB Memory | 80GB IDE Hard Drive | Intel Integrated GMA 950 | Sigmatel Stac 9200 Audio | Intel Integrated 10/100 Network | Dell True Mobile 1370
OS: Installed using Myzar 10.4.6 DVD-ROM on 10GB Mac OS Extended (Journaled) Partition | Dual boot with Windows XP SP2
Devices: Core Image and Quartz Extreme Graphics at 1280x800 Widescreen Resolution due to native GMA 950 Support | Broadcom Integrated 10/100 Ethernet works | Sound does not work
Modifications: For Dell True Mobile 1370, needed to modify IO80211Family.kext using Vendor 0x14e4 and Product 0x4318 using the instructions in this guide (http://forum.insanelymac.com/index.php?showtopic=23684). Dell True Mobile 1370 recognized as Airport Extreme after modification.
Software: Mozilla Firefox 2x, Mozilla Thunderbird 1.5x and Adium 1.0x
 Dell Inspiron 600m
Pentium M 1.5GHz, ATI Radeon Mobility 9000 (dev 4c66 -- use Compaqx1000.zip for AGP), Sigmatel 9750, 512m DDR ram, swapped 2200 for Broadcom wireless. Installed JaS 10.4.6 and .7; everything works: 2d acceleration, multiple resolutions, wireless, sound, once AGP is activated 2d graphic acceleration and PCMCIA card slot become active. Update powermanagement.bundle for battery meter. Solid system, 2d accel is quite smooth on this platform, including full screen video playback support. xbench is respectable considering my slow hardware, 44.56.
Pentium M 1.6ghz (dothan, 400fsb), ati radeon mobility 9000(no QE/CI), wireless (dell 1350 minipc), ethernet broadcom 570(works with hack/patch). Installed from Jas dvd, native to Usb harddrive.
Pentium M 2.1GHz, 1GB RAM, ATI Radeon Mobility 9000 (no QE/CI), TrueMobile 1470 - works, onBoard Ethernet - works, USB2 - works, Bluetooth - works, Sounds - works. OS 10.4.5 update to 10.4.6
Installed with JaS 10.4.6 Pentium M 1.7 GHZ 1 GB RAM ATI Radeon Mobility 9000 YES QE CI Pro wireless 2100- doesn't work, ethernet- works with driver usb- works bluetooth- works sound- works
 Dell Inspiron 700m
- Pentium M 1.6GHz, 64mb Built-in Video, 768mb DDR ram
- Installed 10.4.6 JaS (Select SSE2, ComboPack)
- Sound works, Network Works
- Video is stuck on 1024x768 (no drivers = can't change resolution)
- A few problems with the laptop keyboard, some keys don't function
 Dell Inspiron 710m
- Pentium M 2.0 GHz, 64mb Built-in Video, 1GB DDR ram
- Installed 10.4.6 JaS (Select SSE2, ComboPack) from DVD
- Sound works, Network Works - including wireless (Broadcom)
- Video is stuck on 1024x768 (no drivers = can't change resolution) - enabled native resolution in bios, scales to 1280x800 and looks fine. No QE/CI
- USB 2.0 works
- Needs power management patch for battery meter
- Recognizes DVD/RW
- Keyboard & Fn commands work
 Dell Inspiron 2200
Celeron 1.8, Intel GMA900.
Installed from Jas 10.4.6 DVD to internal drive as only OS. In the patches section, only selected the 10.4.6 combo update, SSE2, Wireless, and GMA900 drivers. Reboot and things ran very well.
Wireless: Working perfectly
Sound: Works, even volume up and down keys on keyboard. (Didn't work if I selected any of the sound options in the patches during installation, had to turn them all off.)
Video: Works with the paperclip trick. Had to install GMA900pkg.dmg from http://art5dog.com/GMA900pkg.dmg to get QE and CI working. Password for the dmg is "good1time".
USB2: Works fine. Tested with iPod.
Battery: Need to install this patch to get battery meter to show.
Sleep Mode: Goes to sleep fine. Waking up is a problem. Sometimes it displays the second monitor on the main screen so I can't see anything. Sometimes it wakes up but the track pad is unusable, makes the cursor move very fast and jerky.
All up a very usable system. Thanks to Sarah for letting me commandeer her laptop. :)
 Dell Inspiron 2650
- Celeron 1.8 GHz 512 Ram
- Installed 10.4.6 Maxxus (Select SSE2, Combo Pack)
- Sound Works Great, but the mouse doesn't work if you hit a key on the keyboard which doesn't work
- Mac OS X about mac reads only 256 for Ram .
- The PC card slot doesn't work .
- The Ethernet and Modem don;t work.
Kalaway 10.5.2 1.5ghz 512mb ram keyboard and mouse work if you manualy fix permissions on the PS2 kext. had to not install any graphics drivers to get it to boot then installed Nvinject go , have 1024x768 no qe/ci yet but working on it the device id for the video 0x0112 any help would be great (firstname.lastname@example.org) no lan yet or pc card,
have had a lot of failures on this computer running osx on this computer I'm doing it to see if I can its a 10 year old laptop running osx its great but not very fast or useful yet.
 Dell Inspiron 5150
- Pentium 4 3.0Ghz
- 1GB RAM
- nVidia Geforce 5200 FX Go
- AC97 Sound Card
- 60GB Hard Drive
- Dell TrueMobile 1450 Internal MiniPCI Wireless Card
DVD Image Used: HOTiSO 10.4.6
Tip: During Install only select Wireless Drivers, SSE2 and the first option in the last drop down (don't select any sound drivers) Only thing not working is OpenGL (but that's the same for like all nVidia cards)
- Pentium 4 3.0Ghz
- 512MB RAM
- nVidia Geforce 5200 FX Go
- AC97 Sound Card
- 60GB Hard Drive
- Dell TrueMobile 1450 Internal MiniPCI Wireless Card
DVD Image Used: Jas 10.4.6
Added battery indicator support. Not able to change screen resolution, have not yet found compatible drivers, but otherwise nearly 100% working.
 Dell Inspiron 6000
Pentium M 1.6gHz, Intel 915 video, Intel 2200bg wireless. No wirless but everything else is working fine with the clean install of Jas' 10.4.6 release (with the exception of the external monitor problem...). I applied the Intel patches during installation and have QE and CI working too. The wireless patch didn't do the trick for the 2200bg.
USER 2:Used 10.4.6 JaS Installation - Broadcom NIC detected as 'Built-In Ethernet' and works fine. I had to do use the Callisto drivers for the Radeon Mobility X300 to work, still don't have QE/CI though, and when I did the other common video patch to enable them - I got the trippy acidic screen with blocks. The things that aren't functioning: Built In SD Card Reader / Dell 2915ABG Wifi. I haven't tried a PCMCIA card yet, so I'm unsure if the slots work.
Note to USER 2: I had the same problem with trippy graphics so I copied over the drivers and OpenGL frameworks from 10.4.5/10.4.5 and it worked, but any App that used Quartz/Core seemed to be very unstable and crash. I ended up using Callisto with the koverg patch and 10.4.4 and it is solid as a rock, despite mouse tearing or flickering. Sound is also very loud, but not clipping (which is how I like it :)
USER 3: Pentium M 1.6GHz, ATi Mobility X300 graphics, Intel 2200bg wireless. All the essentials working perfectly (although stuck at 1024x768 screen res and too much of a newbie to get it to 1280x800) Using JaS' 10.4.7 clean install. Took about 20 minutes to get my disk to boot Windows again but otherwise all good. One annoyance I have is that sometimes the system will freeze up and I have to reboot. Also I can't get iTunes 7 to work as it keeps throwing up a "Not enough memory" error which im still trying to fix.
USER 4: Pentium M email@example.comGhz (pin-mod), 1Go RAM, Intel 915 video, 2200BG, WSXGA+. Using Hotiso image, all (but 2200bg) work fine, I'm using Wi-Fi by an Asus WL-167G USB stick. I've made the "VGA 2 wires" mod in order to boot the installation and the OS without using an external monitor. After download of a french pc keyboard layout, I can type special characters ; the screen goes automatically at 1680*1050 after installation and effects are very nice and fast. Dual boot with Windows XP, using Acronis Disk Manager. - Excuse me for my bad english -
USER 5: - If there is a hard drive or administrator password on your Inspiron 6000, beware! MacOS 10.4.6 will not install unless you remove these passwords. The hard drive also shows up as SATA; does not mean anything as long the partition shows up. UBMICRO FOREVER
USER 6: - Pentium M 2.0, 1GB RAM, ATI Mobility X300 128MB, WXGA LCD. Graphics working in 1280x800 with Callisto 003 (008 gives a white screen on bootup). QE/CI working by patching ATIRadeon9700.kext and ATIRadeon9700GA.kext, but with the usual mouse trails. Sound and Bluetooth are natively supported. Devices not working are the internal modem (Conexant D110), wireless LAN (Intel 2915ABG), and the SDIO controller. The PCMCIA slot works to the point that the System Profiler will detect my TV tuner card, but there's no support for it. Therefore a supported card should work. .
USER 7: - Intel Centrino 1.67GHz, 2GB RAM, ATI Mobility Radeon M24 128MB, 2200BG and SigMatel Audio. Everything seems to be working so far except the resolution (stuck at 1024x768) and the wireless. I managed to get CI/QE to work, and still looking for OpenGL drivers, but I tried multiple methods of changing the resolution, all resulting in 1024x768 (mine supports 1280x800). Also, I'm still looking for 2200BG drivers, but the sound works perfectly after installing the SigMatel drivers from the 10.4.8 JaS DVD. (Edit: I've got the wireless working now, but I can't connect to any networks, I can only see them. Any advice?)
 Dell Inspiron 6400/E1505
User 1-Core Duo 1.8GHz - works in single core mode, either change it in the BIOS, or use the kernel argument
-ATI Mobility Radeon x1400 - No drivers...works with VESA 3.0 at 1024x768 only
-Intel 3945 a/b/g wireless - Doesn't work
-Internal 10/100 Ethernet - Doesn't work
-Dell internal Bluetooth - Works out of the box
-SigmaTel HD Audio - Doesn't work
User 2:-Jas 10.4.6 install DVD
Core Duo 1.66Ghz - Again, only in single core mode
Intel 945 Graphics, full resolution (1680 X 1050), and QE/CI.
Dell 1390 (?) Wireless works.
Sigmatel 9200 Does not work.
-Core Duo 2.0GHz - works in single core mode
-ATI Mobility Radeon X1300 - VESA 3.0 at 1024x768
-Broadcom 440 10/100 Ethernet - works on and off
-SigmaTel HD Audio - doesn't work =(
User 3:Installed - JAS patched 10.4.6
- Core Duo 1.6GHz(?) - Working with both cores enabled
Edit: Big performance improvement in single core mode
- Intel 945G working @ 1600x1050
- Intel 3945a/b/g wireless -Not working
- Broadcom 440x 10/100 network - Working
- SigmaTel HD Audio - Does not work
User 4: 10.4.6 Myzar patched
- Core Solo 1.6 Ghz
- SigmaTel 9200 HD Audio - Not working
- Integrated card reader - Not working
- Everything else working
- Sometimes freezes on User swithing
User 5:Installed - Hotiso Jas patched 10.4.6
- Core Duo 1.8GHz(?) - Working with both cores enabled
and Big performance improvement in single core mode too
- ATI Radeon Mobility X1400 - VESA 3.0 at 1024x768
- Intel 3945a/b/g wireless -Not working
- Broadcom 440x 10/100 network - Working
- SigmaTel HD Audio - Does not work ='(
User 6:-GoatsecxDVD 10.4.6 install DVD
- Core Duo 1.66Ghz - Dual Core works but slower than single core mode
- Intel 945 Graphics, full resolution (1200 X 800)
- Dell 1390 (?) not tested.
- Broadcom 440 10/100 Ethernet - works
- SigmaTel HD Audio - doesn't work =(
User 7:-JAS 10.4.6 install DVD
- Core Duo 1.66Ghz - Dual Core works but disabled dual core mode and much faster
- ATI X1400 Mobility - Can't get native resolution, tried Graphics Mode
- Dell 1390 (?) not tested.
- Ethernet - works
- Audio - doesn't work =(
User 8:-JAS 10.4.9 Updated
- Core Duo 1.66Ghz - Dual Core works but disabled dual core mode and much faster
- ATI X1300 Mobility - CI/QE works by adding the ID "0x71491002" to "IOPCIMatch" in /System/Library/Extensions/ATIRadeonX1000.kext/Contents/Info.plist... but only at 1024x768 (1280x800 needed :-/ )
- Dell 1390 WLAN works
- Ethernet - works
- Sigmatel 9200 Audio - works with AppleHDAPatcher_v1.14 and STAC9200.txt
User 9:-TubGirls 10.4.8 Install DVD
- Core 2 Duo 2GHz- Dual Core works (haven't tried disabling a core for performance)
- Nvidia Geforce Go7300 - works only at 1024x768
- Dell 1390 WLAN doesn't work - strange it's identified as AirPort Extremem (0x14E4,0x7) and it picked up network signals during initial setup but I couldn't connect to any of them (even the unsecured, totally open network) and now the configuration assistant says it's turned off and I can't turn it on or configure it
- Ethernet - works
- Sigmatel HD Audio - not working
 Dell Inspiron 9400/E1705
-boots properly after a core is disabled in osx (check forum) -ethernet, usb, firewire work out of box. -broadcom wireless works after fix (check forum), intel wireless does not work. -sound (sigmatel 9200) does not work. driver is being written but progress is very slow (check forum). Little hope for a driver. better off purchasing a usb sound card. -nvidia 7900 gs works out of box. Install macvidia 1.08 driver to enable resolution change (however, it's a little sluggish) -ATI CARD - writing to you now on it, in OSX 10.4.8 - 1600x1200, thank you every much. Graphics snappy, but no hw acceleration so full screen hi def is still a bit naff. Was considering buying hte 7900 card to swap, but after reading, have realised that ati x1400 has best resolutions for this laptop - can run flash, and movies all at same time with no slow down. (even in the snazzy application view and dock they look good.).
 Dell Inspiron 8200
-OS: JaS 10.4.6 Native w/ Dual boot XP
-Mobile Pentium 4M 1.6ghz, 512 ddr, 60GB
-(Working:)Nvidia Geforce2 GO w/ macvidia @ 1400x1050x32@60, Sound/LAN/Modem,
-(Not Working:) QE/CI, not sure if it's a bug but whenever i close the lid I lose my screen.
-(Not Working:) Nvidia Quadro 4 700 GoGL
-Working: P4 1.7 Ghz, 256 MiB RAM, model with the Radeon 9000 w/ 64MiB VRAM. It has older BIOS (A07 I think). Needs the Callisto b003 driver (last version does NOT work) to get 1400x1050 resolution, otherwise it's limited to 1024x768 with the Apple 8500 driver. However with the Callisto driver at least, OpenGL does not work (ie. the Flurry screen saver will cause the machine to lockup). Also machine will not sleep, it locks up. Everything else seems to be detected and functional.
Dell 9400 Atix1400 graphic card working by modify Radeon1000.kext-replace Device I.D, CI/EQ supported,but Rex locked in 1152x864. Sta 9200 sound card work by apply "AppleHDAPatcher V.1.12,Drop linux 9200.text to patcher icon.
 Dell Inspiron 8500
Mobile Pentium 4M 2Ghz, Mobile Radeon 9000 32MB, Built in sound and Lan. Everything seems to work fine except I can't get native WUXGA resolution and no graphics hardware acceleration. (NOTE: To get the processor working at the right speed, make sure to upgrade to the most recent bios, A08)
Mobile Pentium 4 2.6GHz, ATI Radeon Mobility 9000 32MB, Atheros 5002G mPCI, Dell Bluetooth 350. 10.4.6 Myz + JaS 10.4.7 update. To get full 1680x1050x32 resolution use callisto 003. Anything above that gave me major video issues. Currently triple-booting XP, OSX86, and Fedora Core 5. Installed in that order using Grub as a boot loader. Everything works perfectly.
 Dell Inspiron 8600
Pentium M 1.4gHz, GeForce Go5200 (MacVidia driver for widescreen, no QE/CI), TrueMobile 1300 - works, onBoard Ethernet - works, USB2 - works, Sounds - works.
 Dell Inspiron 8600
Pentium M 1.6GHz w/ ATI 9600 PRO (1024x768x32 / 1280x1024x32, working QE/CI), Intel 2200BG, modem - not working, everything else works1
 Dell Inspiron 9300
Pentium M 2.13GHz, NVIDIA GeForce Go 6800 256Mb, SigmaTel C-Major Audio
DVD Drive: SONY DVD+-RW DW-Q58A
Networking: Broadcom 440x 10/100, Intel PRO/Wireless 2200BG, Netgear WG511T PCCard (additional wireless card)
Running Goatsecx 10.4.6 Vanilla Instal
Working: Audio, Ethernet, Netgear Wireless Card, Video (only get full resolution after installing macVidia driver), Bluetooth, USB
Not working: Intel wireless card (no driver), DVD Drive not recognised as a burner only a reader, video/display does not re-activitate after resuming (known graphic driver issue)
Pentium M 1.6GHz, ATI Radeon Mobility x300 128mb, SigmaTel C-Major Audio
DVD Drive: SONY DVD+-RW DW-Q58A
Networking: Broadcom 440x 10/100, Dell 1450
Running JaS 10.4.6
Working: Audio, Ethernet, Wireless after I swapped in the 1450, Video 1920x1200 QE and CI working follow: <a href="http://forum.insanelymac.com/index.php?showtopic=22215&pid=203030&st=20&#entry203030">Instructions</a> b003 Callisto and korveg patch for some reason the korveg patch didn't work for me so I manually applied the script from the terminal, Bluetooth, USB
My dvd drive is recognized as a burner in the system properties, but I haven't confirmed it with toast yet.
Issues: Sleep doesn't work yet, still fighting with it. The SD card slot doesn't do anything when a card is inserted.
 Dell Inspiron E1405
-Intel Core Duo 1.66Ghz
-Intel GMA950 @ 1440x900
-Dell Wireless B/G Card
-Everything works except HD Audio out of the box
-Exception: Intel ipw3945 will NOT work - drivers aren't really in sight -- any osx-supported expresscard wifi cards?
-Stuttering animations (and apparently boot problems) can be solved by disabling a core:
- this can be done through the bios by disabling multicore or (preferrably) by setting the kernel flag "cpus=1" or "idlehalt=0" - See Tips_And_Tricks#Messing_with_the_boot_options and look for "cpus=0"
Installed with JaS Patched 10.4.6
 Dell Inspiron E1505
-Intel Core Duo 1.66Ghz, 1.86Ghz, 2.0Ghz (works perfectly with dual core disabled in bios or with cpus=1 flag during bootup)
-Intel GMA950 @ 1280x800 (works perfectly with ci/qe enabled)
-Broadcom 440x Ethernet works with patched IONetworking
-Dell 1390 Wireless b/g (works perfectly)
-Sigmatel 9200 HD Audio (Does Not Work, No Fix)
-Battery Meter works with PowerManagement bundle patch
-Installed with JaS Patched 10.4.6
-ATi Mobility Radeon x1400 (VESA up to 1400x1050 (/com.apple.Boot.plist fix*), no fix for widescreen or accelerated graphics)
-ATi Radeon X1300 Mobility (VESA 1024x768, Full QE/CI/QE2D)
-Dell Bootloader probably will not work booting Darwin (If booting from Linux bootloader such as Grub, the bootloader must be on an extended partition)
Add before </dict>
<key>Graphics Mode</key> <string>1400x1050x32</string>
 Dell Latitude C640
-Mobile Pentium 4-M 2.0
-Sound (crystal) doesn't show up in system profiler, does not work
-Dell Truemobile 1450 wireless worked using wireless patches, detected as airport
-1400x1050 display shows only 1024x768, VESA... waiting for proper ATI support
-Ethernet (3c905) shows up as built-in ethernet
-Everything else seems to work "out of the box"
-There is more as yet untested, going to install the power management stuff now.
 Dell Latitude C840
native install with JaS patched 10.4.6
some install trouble (slooow) with original DVD-ROM swapped with a different manufacturer
-Pentium M 1.6Ghz
-AC97 sound works
-Nvidia @ 1400x1050 with MacVidia
-Onboard NIC, PCI, USB, FW working
-wireless with Netgear WG511T - detected as Airport
-Power management hack working
 Dell Latitude D505
Pentium M 1.6GHz (400MHz FSB), 855GM, Intel 2200BG
Finally found a way that works (without deleting kexts to boot)...
Installed with "Mac OS X 10.4.6 x86 Install DVD (JaS)" from TPB - file name was "10.4.6.install.dvd.iso" and it has an md5sum of "5c88e09705ebde2baf1bf19832bdd37a". It has a file size of "4.38 GiB (4698669056 Bytes)".
You need to go into the bios BEFORE you install and disable "Video expansion" on the 4th page. Do normal install and set partition to active if needed (I didn't have too). Do NOT install SSE3 - but do install 10.4.6 upgrade. Boot once into Mac normally before re-enabling the "Video Expansion" in the bios. On my D505 with this image, firewire, sound and bluetooth is working by default. Wifi and battery must be added...
Get working wifi drivers here: http://code.google.com/p/iwidarwin/ (and donate something to this guy for being cool enough to write these drivers;)
Get the battery going here: http://forum.osx86project.org/index.php?showtopic=14912
Cheers and good luck!
Intel Centrino M 1.4 GHz, 512 MB RAM, Sigmatel Audio 9750
Installed with the :Mac OS X 10.4.6 x86 DVD (JaS)" Went into the BIOS and disabled the Video Expansion and then re-enabled after install. Wireless: Working Audio: Not Working B0 error upon startup, working on solution currently
Installed with 10.4.4 Myzar ISO, updated to 10.4.6 using Myzar updater. Again, problems with IOFireWire kexts so needed boot via USB on another machine to remove. Everything works as per 10.4.5: No CI or QE, no wireless. Sound.
Fresh install using 10.4.6 JaS ISO. Install fine, needs IOFireWire* kexts removing - boot again from install DVD, choose Utilities, Terminal. cd to /Volumes/DISKNAME/System/Library/Extensions.
With this installer it seems as though the PCCard bus has been broken. Using Pacifist to reinstall IOPCIFamily from Essentials.pkg fixes the card slot.
Netgear WG511T is no longer detected OOB. Need to use IO8011*Networking.kext from 10.4.5, then chmod -R 755 and chown -R root:wheel. *Must be done*, repairing disk permissions isn't enough. . . . . . . .
 Dell Latitude D600
Intel Pentium M Processor 745 (1.80 GHz, 2MB L2 Cache), ATI Mobility RADEON 9000 graphics engine with 32MB of DDR memory, AC97 (Soft Audio) / ICH3, 768Mb memory
- Installed JaS 10.4.6.install.dvd.iso. Sound, video, keyboard, mouse, and USB all working. * Built-in LAN works if you follow the directions at http://forum.insanelymac.com/index.php?showtopic=8162.
- Wireless will work by following the instructions at http://forum.insanelymac.com/index.php?showtopic=8522. The driver (IO80211Family.kext) is already included in the distribution, so it was a simple process of editing files per the instructions.
ATI support for 1280x1024x32 can be had by editing /Library/Preferences/SystemConfiguration/com.apple.Boot.plist and adding the following two lines:
<key>Graphics Mode</key> <string>1280×1024×32</string>
You can edit this file using sudo and vi without having to then repair permissions.
A higher resolution of 1400x1050 can be had by changing the line in com.apple.Boot.plist to "1400x1050x32", deleting all ATI directories in /System/Library/Extensions, and deleting the files Extensions.mkext and Extensions.kextcache in /System/Library. Finally, run
$ sudo kextcache -k /System/Library/Extensions/
Battery meter works by following the instructions at http://forum.insanelymac.com/index.php?showtopic=14912
Intel Pentium M Processor (1.40 GHz, NO PAE), ATI Mobility RADEON 9000 graphics engine with 32MB of DDR memory, AC97 (Soft Audio) / ICH3, 768Mb memory
Installed JaS 10.4.6.install.dvd.iso. Works. Although no PAE is available. Wireless (Intel PRO 2100) does not work.
Same configuration as above but True Mobile 1400 Wireless. True Mobile 1400 works as AirPort; Changing Display-resolution to 1400x1050 works if ATI*.kexts are removed from /System/Libraries/Extensions.
Installed HotISO 10.4.6 install dvd. Selected Intel Combo Update, SSE2, wireless support, mobility radeon. Don't select audio piece. Sounds works without it and when I did select it, I got errors. Got nic and wireless Dell true mobile working successfully. changed display, but no acceleration on video. can't launch dvd player or install imovie, or idvd. . . .
 Dell Latitude D610
So far I have everything working but Infrared, modem, battery indicator and ethernet. Wireless works with some patching. Still trying to patch ethernet.
- Make space for OS X (Partition Magic, Acronis, etc...)
- Boot off of OS X DVD (plug in a monitor or dongle or you'll get stuck on blue screen, also make sure you have a DVD drive. Mine didn't at first.)
- Install OS X with the following "Customize" patches
- 1.4.6 Combo update
- Radeon Mobility
- Ethernet (Broadcom 5751) can be enabled using this patch but Mac address will be all 0's and this driver causes machine to crash when sleeping.
- Wireless (Broadcom 4319) can be enabled using this method. Just edit /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist, the other patch is not necesary.
- Battery icon can be enabled using this patch but it doesn't appear to update after booting.
Note: Plug in external monitor or dongle when booting or you'll get stuck on the blue screen.
Also Note: You can get back to windows using the Darwing boot loader. Press F8 after the bios screen.
 Dell Latitude D810 & D800
Out of the box: Audio, video at 1600x1200 (minor aspect ratio mismatch), keyboard, trackpad, trackpoint. Not working: onboard ethernet (after binary edits, still can't set macaddr via ifconfig. Hangs the machine.), wireless (Intel BG2200 story), sleep.
Dell D800 with Jas 10.4.6 same as above but I got sound working out of the box as well. Battery indicator can be found here (works on many laptops): http://forum.osx86project.org/index.php?showtopic=14912
Also got onboard nic working by using the notes here: http://forum.osx86project.org/index.php?showtopic=8162&pid=73971&mode=threaded&show=&st=0&#entry73971
And full 1680x1050x32 video support from macvidia driver here: http://macvidia.starchaser.org/
There is also a cool widgit there that will show you your current driver on your system and the driver that is currently availble on-line: http://macvidia.starchaser.org/boards/macvidia-driver/218-macvidia-widget.html
 Dell Latitude D620
Intel Pentium Centrino Duo - (2 ghz), Nvidia Quadro GFX (have not tried patching, but built in res works natively on laptop), Bluetooth (found during regular install), On board ethernet / Intel Wifi both not working. Dell Wireless wifi (Broadcom) works but must follow 2nd part of instructions instructions for Dell Latitude D600 (see above). Also, found that hitting F8 when booting and hitting enter once seems to allow boot. Otherwise it fails sometimes. If you shutoff one core in the bios it will work. Then you can edit the boot file to have only one core boot after which you can reenable both cores in the bios. Looks great though! As of 8/4/2006, audio (Sigmatel) does not work but driver is being written (check forum).
No problems installing straight from HotISO disk or Jas disk (10.4.6).
... note from another person: I had an intel wifi card on my d620 w/ nvidia card... intel of course isnt working.
D620s ship with Intel for WiFi and Broadcom for wired ethernet. I have not tried it but I would think the tweaks for getting ethernet to work on the Dell Optiplex GX620 would also work on the D620. I believe the chipset is the same.
12/26/06 Dell 620 with Dell branded broadcom wireless works out of the box with HotISO!
 Dell Latitude D820
Tried with OS X 10.4.6 (HotISO image), with SSE3 and update. Attention, if you select other extra packages (like wireless), the computer may stay idle after the boot. Also, it seems to be a problem with the dual-core, as mentioned for the previous description, you have to press F8 when booting, and simply press Enter. Otherwise, you might be experiencing numerous "you have to reboot your computer" when booting.
Intel Centrino Duo T2300 (1,66 GHz), Intel GMA 950 (native resolution, but poor or inexistant acceleration on Aqua), Bluetooth (working after install). Wi-Fi & built-in Gigabit Ethernet NIC won't work. Sound doesn't work too.
Haven't tried yet some patches, need some investigations ;)
It is running on my Dell D820, found some more bugs: - the time isn't correct (always two houres behind) if you adjust it, it will but the time wrong in XP. There is no @ key :(and it seems to work better in single core ? If someone finds a way to change the sound problem, please post it... This is a major bug for me. I need sound !
Does work: - MacVidia1.0.8.pkg.zip works great ! Screen resolution: 1920 - 1200. The CD / DVDr works fine.
OSX 10.6.4. - with myHack 1.0 RC4.1 - works fine! Additional kexts: 1. AppleBCM5751Ethernet.kext 2. Mercurysquad - Project Camphor VoodooIntel3945-06.beta (This nice guy stops the development a years ago... suck...
 Dell Precision M60
Intel Pentium M (1.7GHz), Nvidia Quadro GFX (MacVidia driver stuff gives resolutions), ACPI patch for battery, using a patched driver for Networking and WLAN (YES, IT WORKS like a charm !!! ;) Everything else worked out of the box. even Volume buttons.
So the only thing not wokring is CI and QE and LDC switchoff / sleep / standby.
 Dell XPS m1210
XPS M1210, 80gb SATA HDD, T2300 Duo, Intel wireless, webcam, GMA950.
Installed JaS 10.4.6 and 10.4.7.
Boots, no external monitor needed. QE & CI enabled. Only one core.
Battery indicator (percent and time) with PowerManagement.bundle patch. GMA 950 (8086, 27A2), DVD burner, Intel SATA, 1280x800 res, external monitors, broadcom 440x 10/100 all OK.
Two-finger scrolling works well with FFScrollPS2-0.1.RC1 patch, but I had to edit the trackpad sensitivity down to 0 in ~/Library/Preferences/.GlobalPreferences.plist (under com.apple.trackpad.scaling), I still haven't found a perfect value--scrolling works great but actual tracking is still a tad jumpy (i.e. hold your finger still the mouse cursor jitters like its had too much coffee); I'll update here if I find a good solution.
Hardware not working: Intel 3945 (I replaced with a $15 Dell 1390, 100% compatible), Sigmatel 9220 (audio through Headphone jack #1 only, internal speakers non functional), Ricoh card reader.
Webcam not recognized, tried a few OS X USB webcam drivers but nothing yet. Windows recognizes as a standard Logitech USB webcam, so there might be hope for this; not a priority for me.
 Dell XPS m140
Intel Pentium M Processor 745 (1.86 GHz, 2MB L2 Cache) CI and QE work with an external monitor connected. USB Bluetooth work fine. Still no Audio (Has HD Audio in the XP land) and wifi.
Installed JaS 10.4.6.install.dvd.iso
 Dell XPS m140 (aka Inspiron 630m)
Boot only when an external monitor is connected (with CI and QE). I've replaced my wifi miniPCI card with a dell truemobile 1450 and wifi works now (without any hack). Sigmatel audio is recognized (i've the sound icon in the top left border) but no sound at all... USB, ethernet , firewire, keyboard, touchpad and multimedia keys works fine. The memory card reader doesn't works. The works.
I've obtained Power saving and battery level with a hack
Installed version is a patched 10.4.6 with GMA900, sigmatel audio and wireless patch
 eMachines m6805
AMD Mobile Athlon 64 3000+ w/SSE2
ATI Radeon Mobility 9600 (QE/CI Supported)
15.4" LCD AT 1280x800x32@60
24X CDRW/DVD (Burning Not Supported Yet)
Broadcom BCM4306 802.11G (Wireless option during install, works after Rhine II drivers install)
VIA Rhine II (with pinxue.net driver)
AC97 Audio (Stereo Audio Using http://forum.insanelymac.com/index.php?showtopic=15555&st=0 method)
Used Jas 10.4.6 Install DVD with 10.4.6 Combo, AMD Base,AMD SSE2, Wireless, and Radeon Mobility Selected.
On initial bootup, with wireless working, download VIA Rhine II drivers from http://www.pinxue.net/mac/viarhine.html
Install VIA Rhine II driver as per instructions on web site.
Installed Callisto_b003fixed and used method in FAQ to renable QE/CI. http://omni.starchaser.org/callisto/
(*Read FAQ to renable QE/CI after driver install)
Enabled AppleVIAATA.kext as mentioned here http://www.nedprod.com/Niall_stuff/MacOS%20X/index.html
System is running quite well
 eMachines W4605
AMD Sempron 2800+ w/ SSE3
ATI IXP Audio (AC97 Standard) (See the SB400 Audio effort for drivers.)
ATI Radeon X200M 32-128MB Shared memory (CI/QE/OpenGL Not supported. Standard 1024x768 VGA.)
60GB Western Digital 4200 RPM PATA HDD (Supported w/ JaS 10.4.6 install DVD, Zappadoc updated drivers available.)
24X CD-RW/DVD-ROM Drive (See Above.) (Patchburn4 Supported, works fine.)
Broadcom BCM5751 10/100/1000 Ethernet (Supported. Just have to use SetMAC to set MAC address.)
Broadcom 802.11 b/g wireless (Supported.)
Conexant 57.6 Modem (Unsupported.)
3 USB 2.0 ports (All work fine.)
1 Firewire port (Works fine.)
1 16/32 Bit PCMCIA Slot (Unsupported.)
Texas Instruments 4-in-1 Media Reader (Unsupported.)
Sleep/Hibernate does not work properly as well.
As you can see, all in all a pretty well supported laptop. As for the video, I doubt a driver will ever come along as even ATI's drivers for Linux for this card are horrible.
 eMachines W4620
JaS 10.4.6 DVD would not boot. Installed via VmWare in windows. Had to disable legacy USB otherwise very slow disk IO (conflict?). While trying to figure out slow IO - I installed a new kext for AppleOnboardPCATA.kext. I followed these directions.
 Fujitsu Lifebook N6210
Intel Pentium M processor 1.86GHz, Northbridge Intel i915PM/GM, Southbridge Intel 82801FBM (ICH6-M), 1.5 GB DDR2 RAM, 80 GB Samsung SATA HD, ATI Mobility Radeon x600 (device id 0x3150) (works with 1440x900 res. and QE & CI enabled, I used Callisto 003 and Koverg), Broadcom 5788 Gigabit Ethernet (works with some kext patching), AC97 sound works, Intel Pro 2915 (doesn't work), Teac Combo Drive works, USB works, (I plan on buying a USB wifi adaptor), Media Card Reader has not been tested yet, I dont know about the internal modem, as I will never use it.
When trying to boot with my Jas 10.4.6 Install DVD, for some reason the computer wanted to do a network install. I installed with VMWare to my second partition, it worked great after that, and now I dual boot using Acronis. This laptop was hard to configure and install to, but once you get everything working, it is worth it!
 Fujitsu Siemens Amilo M7400
Centrino 1.6ghz SS2.
Work:Intel 855GME Graphcs (no QE/CI), LAN Broadcom 440x 10/100 Integrated controller, Trackpad, Firewire, USB 2.0, Audio Crystal AC97 (even if not listed in peripherals list), Power managment (the battery icon work with the patch)
Don't work: Intel 2100 3B MiniPci WiFi card, Agere System AC97 Modem, Card reader
 Fujitsu Siemens Amilo Pi 1536/1537
I945GM, Intel ICH7-M AHCI, Intel Core 2 Duo T5500 1.66 Ghz, 1 GB (2x512MB Dual channel) RAM, 120 GB 5400RPM WDC SATA HD, ATI X1400 Mobility Radeon 128 MB, PHILIPS DUAL LAYER DVDRW.
JAS 10.4.6 DVD Native Install. WORKING OK : SATA(1.5 Gigabit),USB 1.1, Trackpad, DVD Player, Shutdown, Restart. NOT WORKING: video - only 1024x768x32bit, Intel 3945 Wireless. check out the 10.4.8 section for more fresh results.
 Fujitsu Siemens Amilo P1536
I945GM, Intel ICH7-M AHCI, Intel Centrino Duo T2300 1.66 Ghz, 512 MB DDR2 RAM, 80 GB 5400RPM WDC ATA HD, ATI X1400 Mobility Radeon 128 MB, PHILIPS DUAL LAYER DVDRW.
MacOSX Goatsecx 10,46 DVD Native Install(with sse3) WORKING OK : ATA HD,USB 2.0, Touchpad, Shutdown, Restart. NOT WORKING: Intel 3945 Wireless.
The video and the audio are problems solvable enough to edit the file "apple.boot.plist" and to replace the content of the kext AppleHDA.kext with http://forum.insanelymac.com/index.php?act=Attach&type=post&id=6031
The default, the resolution of video is 1024x768 but editing the apple.boot.plist e aggiungendo the key "Graphics Mode" "1280x800x32" si avrà questa risoluzione video. check out the 10.4.8 section for more fresh results.
 Fujitsu Siemens Amilo si1520
Centrino core duo 1.6ghz SS3. 1GB (2`512MB Dual channel) 91 on xbench
Work: ALL(audio work out of the box with azalia)
Don't work: Intel WiFi card, Card reader
Not correct, work video with gma900 jas patch, lan, wifi.
same for me. plus: strange video behavior in some cases (3D cube movements) got 2GB and T2400.
No Audio, Ethernet, Wireless or Card reader.
 Fujitsu Siemens Amilo Pro v2045
Centrino 1.7 Working: Lan 10/100, Ati X300 Graphic Card (qe/ci), Audio AC97, USB, Trackpad, Power Managment (great),
Not Working: Intel Pro 2200bg WIFI Card, MMC Card Reader, SmartLink Modem, Volume QuickKey
 Fujitsu Siemens Amilo Pro v2020
Centrino 1.6 Working: Lan 10/100, Intel 855 Graphic Card, Audio AC97, USB, Trackpad, Power Managment (great),
Not Working: Intel Pro 2200bg WIFI Card, MMC Card Reader, SmartLink Modem, Volume QuickKey .
 Gateway 400VTX
2.0GHz, 1gb RAM, 40GB HD, JAS 10.4.6 DVD
WORKS OUT OF BOX: Sound, DVD/CD Player, Modem/Ethernet, Video up to 800x600.
MUST PATCH FIRST:
Belkin USB Wireless Adapter,
Keyboard and Trackpad.
DOESN'T WORK: Video is unsupported past v. 10.4.1. 800x600 MAX resolution, PCMIA Card, DVD Movie Playback
 Gateway M275 Tablet
Intel Premium M 1.7GHz SSE2, 512 mb RAM, 40GB HD Using JAS 10.6 DVD Use this website for initial set-up: http://gsbd41316.wordpress.com/
These details after following instructions listed:
Working On Install: Audio AC97, Keyboard, Trackpad, Ethernet, CD Read/Write, USB2 Support, 1024x768 Resolution
Working With Tweaking: Power Management, Wireless: RALink usb Driver w/Hawking Technologies HWUG1, Tablet Functionality with driver found here: http://forum.insanelymac.com/index.php?showtopic=41054&st=0&gopid=303501&#entry303501
Not Working: Card Reader, Intel 2200b/g Wireless, DVD Playback
Not Tested: Modem, PCMCIA
 HP Pavilion dv1000
Specific build is HP Pvilion dv1440 US
- Intel Pentium M 2.0 GHz SSE2, 1 GB Ram, 100 GB HD
- Installed with JaS 10.4.6 Install. Deleted 4 "GMA950" kexts and repaired disk permissions to get FULL QE/CI ENABLED, also used staples to bridge pins 1-6 & 2-12.
- Intel/PRO Wireless 2200b/g Mini PCI still not functioning.
- Ethernet port functions just fine
- Bluetooth works great
- Volume keys on QuickPlay bar work great
- Everything works great except screen (works after patching) and Card Reader and Wireless (with Intel 2200b/g)
How to solve the screen resolution problem on dv1440 US
This tips may apply to you if your laptop monitor is not working and you have to rely on an external monitor.
I found that the OS X does something abnormal on the screen resolution when you try to output the image to the external monitor, i.e., pressing the "Fn" + the special key. I mainly experience this problem in two places: The first time setup and the first login to the system.
The installation works great until it hits the first time setup. The resolution looks weired on both laptop screen and external monitor. The bottom part of the screen seems being chopped and can't be displayed at all. To solve this problem, I enable the text-to-speech by pressing the apple key+F5(I do this by using an Apple USB keyboard). Note that you can't use the mouse here because the cursor you see on the screen and the actual cursor position are out of sync. Then I can tab into different field to hear and select the option. After the first time setup, the resolution will become normal again.
After you login to the OS X, you can only see a blank screen on your monitor because all of the main activities are displayed on the laptop monitor. You will need to go to the System preference --> Display --> Arrangement to enable the "Mirror Display" option. Again, you need to output the "main screen VGA signal" to the external display by using the "Fn" key. Then I enable the text-to-speech option by pressing the apple key + F5 button. At this point, you can use the keyboard to jump from the main partition to the applications --> system preference --> Display --> Arrangement and enable the Mirror Display option. After that, you can select the correct resolution and the resolution will work fine.
HP Pavilion dv1708nr JaS 10.4.6 1.46ghz Celeron M 410(detected as Core Solo),512mb DDR2,60gb Hitachi SATA HDD, GMA950, Intel PRO/100 VE, Broadcom 4311(detected as Airport Extreme, just need to rename en0 to en1 - search the forums for info), Conexant HDA(using Azalia kext), Everything works except Remote and Media Card Reader.
HP Pavilion dv1710us JaS 10.4.6 Same as above for dv1708nr, except 1GB DDR2 and 80GB SATA HDD. Intel 100 Pro device ID 0x10518086 added under IOPCIMatch in AppleIntel8255x.kext for working ethernet. en0>en1 for Airport on Broadcom wireless. Azalia kext with 0x504714F1 under IOHDAudioCodecVendorID in AppleAzaliaAudio.kext. Powermanagement bundle works, shows the meter but time is always calculating. Remote works, at least most of the buttons do. PCMCIA and Dialup untested. Everything else works right out of the box.
HP Pavilion dv1520us JaS 10.4.6 dual boot with Acronis Intel Pentium M 735A 1.73GHz SSE2, 512mb DDR2, 80GB HD Used JaS 10.4.6 with external monitor then made easy paperclip dongle. Now Have Full QE/CI support...and 1280x768 support with Intel GMA 900. Intel/Pro Wireless 2200b/g Not working got a Belkin USB b/g F5D7050v2 with this Ralink 11g-RT2500 Driver. Ethernet functions fine without hack. Audio works, Volume Keys work and so does mute, DVD Burner works, USB Works, Firewire works. CPU runs kinda hot so I installed cputhrottle and it works great and prevents fan from spinning so hard. Haven't tested modem, pcmcia or card reader. No battery support, until I installed Powermanagement Bundle and now I at least get a battery percentage but it won't show time remaining. PCMCIA and Firewire works with this hack. Also updated to 10.4.7 with Jas' update and it works great! . . . . .
 HP Pavilion dv2000
Installed using the JaS 10.4.6 Install.
- HP Pavilion dv2000 US - Intel Core Duo T7200 (2.00 GHz) - 14.1" WXGA BrightView Widescreen (only 1024x768, need new driver) - 128MB NVIDIA(R) GeForce(R) Go 7200(need to find better driver) - 2 GB Ram at 667 (works) - 5400 RPM SATA 80 GB HD - USB 2.0 (Working) - 8X DVD+/-R/RW w/Double Layer Support (Working) - Firewire (Working) - Intel/PRO Wireless 3945ABG (not going to work). - Conexant HD Audio (not working yet) - Ethernet port functions just fine (followed "Compaq V2000" instructions from the forums) - Bluetooth - working - Volume keys on QuickPlay (not tseted) - Card Reader (not tseted)
Since the install, the computer is working as listed above minus the network card which i added a value and restarted to get to work.
 HP Pavilion dv4000
intel PM centrino 1.6, 512 RAM, 80Go DD, intel GMA900 graphics, Intel 910/915 family chipset, Soundmax integrated audio, Realtek RTL8139 ethernet mmc/sd card reader, intel wireless 2200 B/G
installed from myzar DVD, everything work, need hardware manipulation to recognize laptop monitor these are not working: wireless, mmc/sd card reader, integrated modem
work well with 10.4.6 and 10.4.7
 HP Pavilion dv4000
Intel Centrino M 2.0Ghz, 1 Gb RAM, 80GB HD etc Installed from myZAR DVD 10.4.6 - hit the blank blue screen on DVD boot, this was solved by plugging in a second monitor to complete installation and then using the paper-clip trick in the VGA port to allow the internal display to work. Works well but don't play round with the monitor options in Sys Prefs else you lose the screen image after restarts. Wireless card doesn't work.
 HP Pavilion dv4000
dv4030us Pentium M (centrino) 1.6 Ghz SSE2 PAE 512MB RAM 80GB HD
Native install (dual with WinXP) using 10.4.6 JaS patched disk. Install of OSx86 froze (or so I thought) at blank blue screen. Installed using external monitor. Now run using VGA dongle (1-12 2-6 pin bridge) and at full resolution.
Kayboard, touchpad, USB, Sound (including onboard volume and mute controls) work fine. CD/DVD reader works, assuming writer will work (shows in system profiler, haven't tested).
Trackpad does not work (yet?). Appears cardbus and pcmcia readers do NOT work. Patched using IOPCCardFamily.kext but haven't been able to test yet. Haven't tried built-in 5-in-1 cardreader.
Battery indicator did not work "out of the box" but repaired with PowerManagement.bundle from the forums.
Upgrading to 10.4.7 soon.
 HP Pavilion dv4000
- JaS 10.4.6 Install
- Note: After getting everything working, I upgraded using the JaS 10.4.8 Update (SSE2) and had the same results
- Intel Pentium M 740 1.73 GHz (SSE2)
- 1GB RAM
- 1280x800 LCD
- Intel 915GM/GMS, 910GML Express Chipset Integrated Graphics
- AKA Intel 900 GMA
- Intel Pro Wireless 2200 BG
--Working In OSX--
(All installed on its own, unless otherwise noted)
- By connecting the 6 and 12 pins on the external VGA
- Note: Make sure that your wire makes good contact. This should allow you to boot successfully to OSX without an external monitor EVERYTIME!!
- Also has native resolution (1280x800)
- By connecting the 6 and 12 pins on the external VGA
- Graphics (Quartz Extreme [QE] and CoreImage [CI])
- Fixed by downloading special .kext files (I can't find the website where I got these, if I can find it again, I will update)
- Note: If you mess up something when you edit your .kext files and you get the funky colors when you try to boot OSX, don't panic! Simply boot OSX in safe mode (press F8 to get to advanced start up options, then type "-x"), and you should be able to see your desktop. Now you can replace the modified .kext files with the original (You did keep the originals right? Always, always make backups, NEVER replace system files!)
- Quickplay Volume Control
- Working with Powerbundle fix
- Note: I've uninstalled the Powerbundle fix, because it caused my OSX DVD Player to not work. I�m not sure why. If you would like to try this yourself, be sure to make a backup of the original Powerbundle files to revert back to if you choose
- Working with Powerbundle fix
--Not Working In OSX--
- Intel Wireless
- Drivers not available... yet (Fingers Crossed)
- Quickplay for DVD and Music
- Have not researched solution
--Other Helpful Hints--
- Whenever you update or edit your system files, be sure to remember to repair your privileges. This will also improve your overall system performance, even after a fresh install.
- This can be done through Disk Utility; there is an option to repair privileges. After clicking, wait for it to finish, and then restart.
- Always, always make a backup of all your system files before you update or edit them.
- To keep mine straight, I make a new folder for them and add "original" or "mod" in the file name.
- TheOriginalKermit on OSX Project Forums
 HP Pavilion dv5000
AMD Turion 64 model (2.0Ghz), ATI Radeon Xpress 200M with 128MB VRAM, 1GB RAM, IDE (not SATA like newer models) 100GB HD Installed from Myz DVD 10.4.6, with all patches, including AMD Enabler (of course) and SSE3 enabler. Boots fine off DVD and everything and boots fine natively. The following is from just booting without making any manual changes to kext loading.
Working: USB, FireWire, Ethernet (Realtek RTL1839) Half-working: ATI video card, only allows 1024x768 on default driver (failed to work with Callisto driver) Not working: Wireless ethernet, sound (AC'97 codec, easily changed to working (this is assumed)), modem, PCMCIA slot does nothing when a card is inserted, remote control :P
I assume due to other Pavilions that the MMC/SD card reader doesn't work either however I do not have anything to test this with. I also cannot test the PC card slot (no card to test with, I'll assume it doesn't work).
Another User- gamer100ti My HP AMD Turion 64 2 GHZ an Ati Radeon Xpress 200m with 256 VRAM 1 GB Ram with 120 GB hdd installed with JaS boots fine. Works great with patches. Everything works!
==HP Pavilion dv8000 / dv8327cl== / dv8323ea Intel Core Duo 1.73 ghz, 2GB RAM, 2 x 120GB HD, Conexant HD Audio, Intel Pro 100/VE ethernet, Nvidia Geforce GO 7600 256MB
Working: Nvidia Geforce Go 7600 (0x039810DE) Conexant HD Audio (0x504714F1) Intel Pro 100/VE NIC (0x10928086) USB ports Firewire
Not Working: Intel 3895ABG Wireless
Not Tried/Unknown: Memory card reader PCMCIA Express Card Slot IR Remote S-Video output VGA output
Installed from JaS DVD with the Intel options only (not AMD) and the combo 10.4.6 update as well as the decrypt update option.
Graphics are working (without acceleration) using MacVidia's 1.0.8 driver. (1440x900x32 resolution)
Sound working after updating the AppleAzaliaAudio.kext with the vendor id/dev ID. (ID: 0x504714F1) I also had to remove the HDA kext for this to work.
For the network card, I edited the IONetworkingFamily.kext/Contents/PlugIns/AppleIntel8225x.kext and added the dev id. (ID: 0x10928086)
Was able to use the USB ports after I followed the directions and downloaded the Generic EHCI USB kext from this thread.
Firewire is working and capture from a firewire DV cam has been tested.
AMD = Installed from Myz Image for AMD. Works almost fine, all thats not working is the Graphics Card, the Sound Card, Wifi. But there may be fixes.
 HP Pavilion zd7000
intel pentium 4 3.06 ghz, 1GB RAM, 60Gb hd, Soundmax integrated audio, Realtek RTL8139 ethernet mmc/sd card reader
installed from JaS DVD, everything work, need nvidia driver to get proper resolution. these are not working: wireless, mmc/sd card reader, integrated modem
wireless works on a p4 2.8ghz zd7000 if you apply the wireless patch in the JaS disc custom install, additionally the 2.8ghz processor has no sse3 so make sure you only apple the sse2 patch in custom install
 HP Pavilion zd7380us
1GB DDR SDRAM
NVidia GeForce FX Go5700 128MB
Install went as smoothly as possible. I've had no problems running any programs or installing any software. Wireless works fine as do misc. USB devices. Only complaint is no support for the video card, so resolution is limited to 1280x1024 and no CI or QE enabled.
 HP Pavilion zd8205us
Dual boot with Acronis Intel® Pentium® 4 CPU 2.8Mhz HT, 2048MB RAM, ATI X600 PCIE. X600 works fine installing callisto drivers build 003 first (1440 x 900 @ 60 Hz 32bit), Kover patch applied and QE+CI enable by editing /System/Library/Extensions folder for ATIRadeonXXXXGA.plugin/ (XXXX depends on your card model). Edit its Info.plist, under IOProviderClass key change IONDRVFramebuffer to CallistoFB, update or delete Extensions.mkext and Extensions.kextcache, then reboot. Radeon Mobility X600 (M24) (PCIE):
Chipset Model: Radeon Mobility X600 (M24) (PCIE) Type: Display Bus: PCIe Slot: PCI VRAM (Total): 128 MB Vendor: ATI (0x1002) Device ID: 0x3150 Revision ID: 0x0000 Displays: Color LCD: Resolution: 1440 x 900 @ 60 Hz Depth: 32-bit Color Core Image: Supported Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported
Ethernet works fine Sound works fine Card reader working perfect Note: you can install the OS on external USB2 Hard Drive, and it works better than the internal one. Wireless working fine with Airport2. Full keyboard controls, Audio butons, Full DVD Support:
HL-DT-ST DVD-RW GWA-4082N: CD-Write: -R, -RW DVD-Write: -R, -RW, +R, +RW, +R DL Burn Underrun Protection CD: Yes Burn Underrun Protection DVD: Yes
Doesn't resume from sleep/standby/hibernate so it must be disabled from power saving preferences. All Screensavers works fine All Video Play/Editing works fine (DIVX ENABLE) Wireless Working fine Battery Meter Working
 HP Pavilion zd8237ea
Intel® Pentium® 4 CPU 3.06Mhz HT, 1GB RAM, ATI Radeon X600. X600 recognised with PCIE and full VRAM (256Mb) works installing callisto drivers build 003 first (1440 x 900 @ 60 Hz 32bit), then I had QE+CI running following instruction on forum (search for x800 hexedit). Ethernet works, WiFi can work without problems recognised as an AirPort Extreme (0x14E4, 0x1356), search forum. Not sure if internal modem works since I don't use it but I suspect not. Bluetooth works but cannot recognize my PlayStation Portable. Audio works wonderfully, output+input, I can use GarageBand to make my ScreenCastsOnline Podcast simply. Installed from 10.4.7. JaS DVD Just for the record, yes, it's possible to have an x600 working at full resolution with QE+CI: Radeon Mobility X600 (M24) (PCIE):
Modello Chipset: Radeon Mobility X600 (M24) (PCIE) Tipo: Monitor Bus: PCIe Slot: PCI VRAM (totale): 256 MB Fornitore: ATI (0x1002) ID dispositivo: 0x3150 ID revisione: 0x0000 Monitor:
Risoluzione: 1440 x 900 @ 60 Hz Profondità: Colore 32-bit Core Image: Supportato Monitor principale: Sì Mirror: Spento Online: Sì Quartz Extreme: Supportato
To resolve mouse tearing install Mouse Locator and follow the instruction on forum or search google for "mouse locator tearing", I've used Shadowed png. Doesn't resume from sleep/standby/hibernate so it must be disabled from power saving preferences, but has a fair management on fans.
 HP Pavilion ze4930
Celeron M 1.3Mhz, 512MB RAM, Intel 855GME Graphcs, Realtek AC97 Audio, Broadcom 4306 WiFi, RealTek RTL8139 Ethernet. Installed from JaS DVD. Everything works great except for no QE/CI, even PowerManagment (Battery Meter & Sleep) now work with Latest Patch from Forum.
- HP ze4930US - Installed with 1GB RAM. Only 32mb video detected (64mb total intel 852gm). Input device needs latest patch. NO QE/CI. Laptop cannot restart, only shutdown. Runs well. Use the latest Power Management and works. Updated to 10.4.7 and used patch to 10.4.11
 HP Pavillion zv5000
SPECS: 3.0ghz 512mb ram, Radeon 9000 igp, ATI AC97 sound, Broadcom 4311 wifi, Realtek RTL8139 Ethernet. Works: Display with 1280x800 (no qe/ci etc etc but atleast the right res.) using b003 from omni's drivers located at http://omni.starchaser.org/ Wireless works out of the box as long as you're using Jas' dvd Sound works with the kext on http://forum.insanelymac.com/index.php?showtopic=10903&hl=ati+sound that forum topic dma and dvdrom with burning support works with http://forum.insanelymac.com/index.php?showtopic=13197&hl= everything else worked out of the box
only thing now would be qe/ci which I dont expect to get working on a radeon 9000 igp
 HP Compaq Business nc6000
Pentium M 1.6ghz 1MB L2 Cache
ATi Mobility Radeon 9600 32Mb (QE/CI/GL)
W500 a/b/g Wi-Fi Atheros Based (WorkingOK)
AC97 Sound (WorkingOK)
Broadcom NetXtreme Gigabit Ethernet (WorkingOK)
Integrated Modem (Detected, i assume it`s working)
USB Ports (WorkingOK)
PCMCIA & SD Card Reader (NotDetected)
Keyboard, Trackpad and Synapticks Touchpad (WorkingOK)
Volume QuickKeys (WorkingOK).
 HP Compaq nc6120
Pentium M 1.85GHz, Sound OK. Broadcom NetExtreme Gigabit Ethernet OK (w/patch), Bluetooh OK, Wi-Fi not detected, Touchpad Ok, Volume Keys OK . .
 HP Compaq nx6325
AMD Sempron 3500+/Turion X2 512MB Ram ATI Radeon Express 1150 (No CI / QE) Firewire Soundmax Audio (Not working) Broadcom Ethernet (Netlink - Working, use AppleBCM5751 add 0x169c14e4, then reboot, insert mac address, and bring up enX) Broadcom WiFi (Works - edit NetworkPrefs.plist change en0 to en1 and integer to 1) Synaptics Touchpad 6.2 (No scroll wheel but works) ATI SB400 SATA (Have to edit AppleVIAATA.kext and add 0x43791002 before recognised, use VMWARE to install and edit before native boot) DVDRW Works
==HP Compaq nx7010== PLEASE HELP !!!!! Intel® Pentium® M processor Centrino 1.7 GHz, 80 GB Memory, Ati Radeon Mobility 9200 ),Firewire, USB 2.0, Sound, Ethernet, Wifi (doesn't work), Touchpad, Bluetooth(doesn't work), DVD+-RW, Modem. unknown notification when turning on the wifi button- unrecognized usb- no driver installed notification.??? .
 HP Compaq nx8220
Pentium M-2.13Ghz SSE2
ATI X600 Mobility works at native res 1680x1050 with both QE and CI enabled through omni's driver. (http://omni.starchaser.org/)
Apple Aperture 1.1.1 runs like a treat..
Ethernet does not work
WLAN does not work (DLINK usb dongle works fine)
Speed Step effects perfomance when booting on battery.. fixed with CPU Throttler
Battery meter did not work.. Fixed with new Power Driver
Bluetooth Works with bluetooth mouse
Sleep / Hibernate does not work
Sound Volume controls work
 HP Compaq nx9600
Pentium 4 3.6GHz SSE2
ATI X600 Mobility works using Koreg's method with both QE and CI enabled. Still trying to get resolution to be 1680x1050.
Ethernet is detected.
Volume controls work.
 HP Compaq nc8430
- Intel Core Duo 2.0GHz: Installer would crash at random places and system wouldn't boot at all without specifying cpus=1 on command line.
- ATI X1600 (PCI-E): Appeared to work straight away with QE and CI, however couldn't get it to work at 1680x1050. Closest I managed was a stretched 1400x1050. No display at all with Borisbadenovs Method driver.
- Integrated Bluetooth: recognised straight away, couldn't test though.
- SoundMAX Integrated Digital HD Audio (ADI1981HD High Definition CODEC): Didn't work at all
- Integrated Gigabit Ethernet (Broadcom NetXtreme BCM5753M PCI-E): No joy. Tried BCM57xx driver but didn't work. Showed up in System Profiler and was grayed out in network settings, but couldn't enable it.
- Integrated 802.11a/b/g Wifi (Intel PRO/Wireless 3945ABG): No luck.
- SATA hard drive: worked perfectly. Booted through Grub installed from windows. Added timeout option to bootoptions prefs file to add small timedelay to let me specify additional options like single user mode.
System boots pretty fast, but with no wireless or ethernet and a stretched screen isn't terribly useful!
 HP Compaq nw8200
Work very usable with these issues:
- Intel Pentium M - Works perfectly with 10.4.6 Jas DVD (choice SSE2 packet at installation).
- ATI X700 (PCI-E): Unfortunately this is not the best working part. You will have to replace 10.4.6 ATIRadeion*.kext files with those from 10.4.5 and then use the koverg patch to support devid 5653. Also you will need to replace OpenGL and Quartz*.frameworks with those from 10.4.5. This will get you hardware accelaration. Screen resulution change works with the omni callisto drivers but after change mode the screen gets jumpy (very strange for lcd monitor). so the resolution to get more than standard vga 1024x768 is adding:
<key>Graphics Mode</key> <string>1280x1024x32</key> in your com.apple.Boot.plist file.
- Integrated Audio AC97 codec: works with the JAS installation but after installation you will probably get message that AC97 drivers are with wrong permissions. Use Application->Utilities->Disk Utility -> Repair permission to fix.
- Integrated Gigabit Ethernet (Broadcom NetXtreme BCM5753M PCI-E): There is drivers already but doesn't support device with id 167d. you will need to patch the driver - search with keyword 167d in the forums for solution.
- Integrated 802.11a/b/g Wifi (Intel PRO/Wireless 2200BG): the is iwi2200 driver with work in progress but doesn't work currently.
- booting laptop on battery - involves mac os x to be terribly slow. - it is possible using grub to how dual (or even more) system machine. setup mac os x in grub as example shows for windows.
 HP Compaq tc1100
- Intel Pentium M - Works with 10.4.6 Jas DVD (choose SSE2 package).
- Note: Don't choose any other drivers, as this may break the install
- Wired Network Card
- Not Working:
- Wifi Card
- Wacom Tablet (Could with TabletMagic)
 IBM Thinkpad R52
- CPU: intel centrino 1.73Ghz
- RAM: 512 MB
- Video: ATI Radeon Mobile x300 64M
- HHD: 60G Sata
Installed Myzar's 10.4.4 wich included the .5 and .6 updates, i had to install Callisto to enable resolutions and Koverg's patch to enable QE/CI. Wireless working with 3rd party driver (search 2200gb on forums). Sound working, USB working.
 IBM R52 1860-A12
CPU Type: Mobile Intel Pentium M 730J, 1600 MHz (12 x 133) Motherboard Name: IBM ThinkPad R52 Motherboard Chipset: Mobile Intel Alviso-G i915GM System Memory: 2038 MB (DDR2 SDRAM) Video Adapter: Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family (128 MB) 3D Accelerator: Intel GMA 900 Monitor: IBM ThinkPad 1024x768 TFT LCD (12003) IDE Controller: Intel(R) 82801FBM Ultra ATA Storage Controllers - 2653 Disk Drive: FUJITSU MHT2080AT (80 GB, 4200 RPM, Ultra-ATA/100) Optical Drive: HL-DT-ST RW/DVD GCC-4244N (DVD:8x, CD:24x/24x/24x DVD-ROM/CD-RW) North Bridge: Mobile Intel Alviso-G i915GM South Bridge: Intel 82801FBM ICH6-M AC'97 Audio Controller: Intel ICH6 (codec Name : Analog Devices AD1981B(L)) Graphics Processor Properties: Intel 82915GM Graphics Controller (GPU Code Name:Alviso-GM VEN_8086&DEV_2592&SUBSYS_05821014&REV_03) Bluetooth Devices: ThinkPad Integrated Bluetooth IV (Vid_0a5c&Pid_201e&Rev_0009) IEEE 1394 Bus host controllers :Texas Instruments OHCI Compliant IEEE 1394 ( VEN_104C&DEV_8029&SUBSYS_05611014&REV_01) Network adapters / 11b/g Wireless LAN Mini PCI Adapter: Atheros AR5001X+ Wireless Network Adapter (VEN_168C&DEV_0013&SUBSYS_04081468&REV_01) Network adapters : Broadcom NetXtreme BCM5750 (VEN_14E4&DEV_167D&SUBSYS_05771014&REV_11)
1) 10.4.6. Jas DVD with SSE2 and GMA900 patch. 2) Need Hit Fn+F7 when boot to blue screen. 3) after installation need to
1. copy mach_kernel from dvd to /Volumes/[drivename] 2. delete IOPCCardFamiliy.kext in /System/Library/extensions/
4) Native works
1.sound 2.bluetooth 3.firewire 4.video adapter gma900 CI & QE supported (Hit Fn+F7)
5) Need to be fixed
1.wired lan get AppleBCM5751Ethernet.kext from http://forum.insanelymac.com/index.php?showtopic=4987&st=180# (Thanks to NISA-IT) Instruction 1.unpack 2. move AppleBCM5751Ethernet.kext to /System/Library/Extensions/ 3. open Terminal 4. sudo -s 5. chown -R root:wheel /System/Library/Extensions/ 6. cd /System/Library/Extensions/ 7. chmod -R 755 AppleBCM5751Ethernet.kext vi /etc/rc.local sudo ifconfig en0 ether 00:00:00:00:00:00 <-- replace your mac address here sudo ipconfig set en0 BOOTP sudo ipconfig set en0 DHCP sudo -s rm /System/Library/Extensions.mkext rm /System/Library/Caches/com.apple.kernelcaches/* kextcache -c 8. reboot
2.wireless lan get IO80211family.kext from 10.4.5 or http://forum.insanelymac.com/index.php?showtopic=13522&st=20# (Thanks to vinayp) 3. to enable Quartz 2D Extreme and disable beamsync go to http://forum.insanelymac.com/index.php?showtopic=15387&st=0# (Thanks to TeKKi)
 IBM R60 9460-6KU
Jas 10.4.6 with the SSE3 patch. Out of the box I have Full core video support and Quatrz Extreme Support. Full function track pad, USB and firewire.
Battery indicator can be found here (works on many laptops): http://forum.osx86project.org/index.php?showtopic=14912
Still not working: sound onboard nic wireless
 IBM T40
Pentium M 1.5ghz. Everything working from scratch, used JAS OS10.4.6 Install ISO except: Graphics: OSX 10.4.6 is starting up, Desktop working tec, but Screensver, DVD Player does not work, Problem idtenfied as Rodeon Mobilty 7500 chipset, google for a workaround, may use KATANA (TJB Dec 06)
 IBM T41p 2373
Pentium M 1.7ghz. Everything working from scratch, except: Graphics: ATi FireGL T2. It works, but not with the ATI drivers. Delete all starting with ATI from /System/Library/Extentions Wireless: a/b/c works if you download and use IO80211family.kext from 10.4.5 and copy it over the 10.4.6 one in /System/Library/Extentions. Also you need to change "en0" to "en1", and "0" to "1" in /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
Addon from other user:
Everything works under 10.4.6. -To get wireless you need to copy over the 10.4.5 io80211.kext from the combo updater and using pacifist. Also change the networkinterface.plist from en0 to en1 and the 0 to 1. -Natively, QE and CI work, however, you are not in 1400x1050 res. You can change to 1400x1050 two different ways. First way is to just do the Graphics Mode trip, and change it to 1400x1050x32. You can also do the Callisto B003 hack, and get display selections within the OS. However, doing this disables QE and CI. Follow step 11 of the callisto FAQ in the downloaded folder. -You do the battery hack to get the battery display back. - Turn on.off bluetooth with fn+f5 Notes: Using QE and CI, you get a LOT of mouse tearing. Personally, i am not watching very many movies compared to how much screen tearing i am willing to deal with, so i used the callisto hack but opted out of turning back on QE and CI. If I need QE or CI, i just turn it on, although it does take a reboot. Not positive that the callisto hack unlocks widescreen b/c i havn't hooked it up to my monitor yet, but i have no reason to believe it wouldnt based on others experiances.
 IBM ThinkPad T42 2373
T42 2373 KH6/KB6 working under 10.4.5 T42 2373 KH6/KB6 P M 725 1.6G(2M cache), 1.25GB RAM, 60GB 5400rpm HDD, 14.1SXGA+(1400x1050) TFT LCD, 64MB ATI Radeon 9600, 24x24x24x/8x CDRW/DVD, Intel 802.11b/g wireless(MPCI), Modem(CDC), 1Gb Ethernet(LOM), UltraNav, Secure Chip, 6 cell Li-Ion battery,
Everything is working under 10.4.6 except wireless support. Seems working more smoothly with the resolution of 1400x1050x32. System Profile shows QE has been activated.
 IBM Thinkpad T43p 2668-F8G
T43p 2668-F8G 2.00Ghz / 1GB / 60GB 5400rpm / ATI Mobility FireGL V3200 128mb with 1600x1200x32 / Broadcom NetXtreme BCM5751 works with appleBCM5751Ethernet.kext
Installation DVD: 10.4.6 JAS
 IBM Thinkpad T60p 2007-93J
T2600 2.17Ghz Core Duo / 1gb / 100gb 7200rpm / FireGL V5200 256mb / 15" FlexView IPS
details in Japanese is here http://www-06.ibm.com/jp/domino04/pc/support/Sylphd13.nsf/jtechinfo/SYP0-031CC46
Installation DVD: 10.4.6 JAS
Everything works great but,
- SoundMAX Integrated Digital Audio : follow this tutorial http://forum.thinkpads.com/viewtopic.php?t=28200
- Power Management : follow this http://forum.insanelymac.com/index.php?showtopic=14912
- ATI Mobility Fire GL V5200 :
- Vendor ID: ATI (0x1002)
- Device ID: 0x71c4
- tried Borisbadenov Method here http://forum.insanelymac.com/index.php?showtopic=19806 and the method here http://forum.thinkpads.com/viewtopic.php?t=28200, still no QE/CI. A lots of combination of BIOS (before and after updating to 79ETC1WW (2.01)) and extension files just gave me a black screen with or without some color pixels on the top of the screen.
- Intel PRO/Wireless 3945ABG IEEE802.11a/b/g : not works as you know why (lack of the driver).
Finally, I turn to the 10.4.7 JAS DVD and QE/CI works. Thank you guys. (details here http://wiki.osx86project.org/wiki/index.php/HCL_10.4.7/Portables#IBM_Thinkpad_T60p_2007-93J)
 IBM Thinkpad T43 type 1875
1.73 GHz Pentium M (Dothan), Intel ICH-6 chipset (GMA915GM graphics). Output of lcpci under Linux:
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) 00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03) 00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03) 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03) 00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03) 02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express (rev 11) 04:00.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller 04:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05)
GMA915M graphics work perfectly with QE and CI if an external display is plugged in or the dummy method is used. Suspend/hibernate/restart all work flawlessly. AC97 audio works after adding device ID to relevant plist files. Broadcom adapter not yet working.
Boadcom Ethernet Adapter; T43 use Broadcom 5751. It can be activated by patch the 5701 driver. See:(English) http://forum.insanelymac.com/index.php?s=&showtopic=4987&view=findpost&p=129533
 IBM Thinkpad X40 2386
Pentium M 1.5 Ghz Audio: Works, had to fiddle (will update momentarily) Wired Ethernet: Works, no fiddling Wireless Ethernet: Not working out of the box.
 IBM Thinkpad X41
Running 10.4.6 JAS or HOTiSO (do the paperclip trick or connect a monitor to the VGA output)
Install with GMA900 patch, the single correct CPU patch (ie. SS2, or SS3, or AMD SS2, or AMD SS3, but not all, just one), and combo update.
Video: Works, but seems like you need GMA900 patch from install DVD. (need to test Diabolik's GMA900 patch http://diabolik1605.com/Alchemic/files/DiaboliK.GMA900.Fixer.pkg.zip)
Dual Head VGA: Some say it does not work, but it works for me, out of the box with GMA900 patch from install dvd
Audio: Works, out of the box
Wired Ethernet: WORKS! Use Broadcom NetXtreme driver by Nisa-IT http://forum.insanelymac.com/index.php?s=&showtopic=4987&view=findpost&p=129533
Wireless Ethernet: WORKS! Use iwi2200 and Network Selector http://code.google.com/p/iwidarwin/
Mouse: Works, out of the box - integrated pointer
Bluetooth: Works, out of the box
Battery Meter: WORKS! Use PowerManagement.bundle by Keithpk http://forum.insanelymac.com/index.php?showtopic=14912&hl=mouse#
 IBM Thinkpad X60s 1704
- Power management: does NOT work
- Modem: have not tested
- Wireless: replaced the original Intel card with IBM's Atheros card
- Sound: follow instructions at http://forum.osx86project.org/lofiversion/index.php/t18642.html
 IBM Thinkpad Z60T
Pentium M 1.86 Ghz (750)
Audio - works
Wifi - works (en0 --> en1)
Network - works (pci id patched kext)
Video - works (QE\CI, full resolutions support), but need external monitor or dongle to boot.
 Medion MD98200
Boot normally in GUI, and format the Hard Drive as Mac OS X (Jounaled) Then, install, and activate the partition with Hiren's Boot CD, when the PC gives a boot error.
What doesn't work:
- Build-In audio, maybe you can try the Intel HDA audio patch. - Build-In ethernet, if I find a patch, I will post it here.
- Wireless internet works, install this driver:
- Video Card works out-of-the-box - USB works
What works a little bit:
- DVD-RAM drive can read cd's and dvd's, but can't write dvd's or cd's.
What was not tested:
- Modem connection - Ethernet & Sound - Card Reader
 MSI S260 (MS-1012)
Dual Boot Installation Windows XP + OS X. 2 partitions, 1st partition WinXP Pro SP/2, 2nd OS X. Second parition active, system boots Darwin loader by default (F8 to select OS). Installed using JAS Patched 10.4.6 ISO, then updated to 10.4.7 with JAS updater.
Pentium M 740 (1.73 Ghz w/2MB cache), 512MB DDR, 12.1" WXGA (1280x800) TFT.
Audio - AC97 ICH6 + Realtek AL655 works (see below).
10/100 Ethernet - Realtek RTL8139 works by default.
Video - GMA900 (QE\CI, full resolutions support w/patched drivers), requires 2 wire hack on external VGA port.
HL-DT-ST GCA4080N DVD�RW - works and disc burning is supported by default.
IEEE1394 FireWire (400) - works.
USB 2.0 - works by default.
802.11 Wifi - Intel 2915ABG not working. Will replace with generic Atheros card or MSI RT2560 (RaLink).
ADDENDUM: Installed the MSI RaLink miniPCI card, and used the drivers OS X 10.4 drivers from Ralink's website. Works great, although the wireless doesn't turn on until the Wireless utility launches. For some reason, the utility takes a long time to start, but once it does, it works fine.
Modem - Agere AC97 not working.
SD/MS Media reader - not working.
Built-in keyboard shortcut buttons (Find, Mail, Web) non-functional.
PCMCIA/Cardbus slot not tested.
1. The optional Sigmatel 9220 and USB SoundBlaster drivers were interfering with the Intel ICH6 AC97. When installing, do not choose any of the AMD patches, optional Audio drivers or ATI Radeon Mobility drivers.
2. The GMA900 drivers included on the disc do not support QE/CI. Use the modified drivers found here to get QE/CI:
3. Use a dongle, external monitor or the 2 wire trick to force the system to recognize the buolt-in LCD. without it, the installation (or actual boot up) will freeze at the blue scrteen, immediately after the gray logo screen with the spinning tick marks. MOre info here:
 MSI Megabook S270 (MS-1013) / PC Club Enpower ENP41304
AMD Turion MT-30 (1.6 Ghz w/1MB cache) ATi RS480M + ATi SB400, 512MB DDR, 12.1" WXGA (1280x800) TFT.
AMD Turion MT-37 (2.0 Ghz w/1MB cache) ATi RS480M + ATi SB400, 1024MB DDR, 12.1" WXGA (1280x800) TFT.
Using MacOSX_10.4.6DVDPATCHED_Myz.iso *ONLY*
Custom install with language packs & printer drivers removed, SSE3-only kernel added.
- PATA IDE: remove AppleGenericPCATA.kext and AppleOnboardPCATA.kext from /System/Library/Extensions/IOATAFamily.kext/Contents/PlugIns/
copy Zappadoc's AppleOnboardPCATA.kext to /System/Library/Extensions/
- ATI driver: use Omni Callisto b003fixed alternate ATI driver. Follow the procedure described in the archive. First boot on Windows to identify the EDID string with Monitor Asset Manager.. The string in CallistoHAL.kext should be 0x41501002 instead of 0x59551002 and the string in Callisto.kext should be:
00 FF FF FF FF FF FF 00 06 AF 02 0C 00 00 00 00
01 0E 01 01 80 1B 11 78 0A 3F E0 98 55 53 87 26
24 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 4C 1D 00 80 50 20 10 30 15 20
44 00 05 A3 10 00 00 18 00 00 00 0F 00 00 00 00
00 00 00 00 00 0B D2 02 10 00 00 00 00 FE 00 44
35 33 38 32 00 42 31 32 31 45 57 32 00 00 00 FE
00 FF F1 DF D5 A3 6F 51 00 01 0A 20 20 20 00 18
Video: ATI Radeon Mobility 200M [working, at 1280x800, no QE/CI with Omni Callisto b003fixed driver]
Hard drive: Hitachi Travelstar 20GB or 60GB [working with Zappadoc kext]
Optical drive: Pioneer DVR-K05 DVD+/-R DL slot [working with Zappadoc kext]
Ports: IEEE1394 (400) / USB 2.0
Keyboard / touchpad
Currently not functional:
Audio: type unknown
Modem: type unknown [not tested]
Wifi: Atheros AR5213A-00 802.11g
PCMCIA/Cardbus slot [not tested]
SD/MS media reader [not tested]
Built-in keyboard shortcut buttons (Mail, Web, Find)
 MSI S262 (MS-1057)
Intel Core Duo, 12" Widescreen
Working: Graphics (including QE/CI support & dual display support), HD Audio (ALC882), Gigabit Ethernet (Realtek 8168/8111), bluetooth, wireless (USB), USB, touchpad, keyboard, power management (battery meter)
Not working: Card reader, Built-in wireless (Intel 3945ABG)
Not tested: ExpressCard slot, Modem
HOTiSO 10.4.6 DVD Installation Details:
-Make sure to install AMD & Intel patches
-After installation, must reboot in safe mode (-x) and move AudioHDA.kext and AppleIntelGMA950* (all files starting with AppleIntelGMA950) out of the /System/Library/Extensions folder.
-Also, to fix audio, follow the procedure described here: http://forum.osx86project.org/index.php?showtopic=5064
-To fix battery meter, see here: http://forum.osx86project.org/index.php?showtopic=14912
-For wireless, you must buy part# WLL4080PCIX (atheros AR5006EX) by emailing firstname.lastname@example.org. They will sell you the card for $65. Do not use the Intel 3945abg, as it is NOT compatible with OS X. Alternatively, use a USB-based 802.11g adapter. See: http://wiki.osx86project.org/wiki/index.php/HCL_10.4.5#Wireless_Network_Cards Also, you can't use the drivers that come with 10.4.6. You have to replace IO80211Family.kext with the version from 10.4.5 (in /System/Library/Extensions).
-If your card is not detected as an AirPort card, see here to fix: http://forum.osx86project.org/index.php?showtopic=13522&st=20&gopid=117938&#entry117938
Actually the original wireless card in some of s262 is produced by ralinktech and the driver is available from:
JaS 10.4.6 Installion Details:
-Boots fine after install with correct resolution
-Only installed the Combo Update patch and the intel SSE2 & 3 patches
-Everything under 'working' was fine by defualt except audio, network and battery metter
-Audio is fixed with this: http://forum.osx86project.org/index.php?showtopic=18642
-Battery Metter (see above)
-Network is fixed using this KEXT: http://forum.insanelymac.com/index.php?showtopic=29436
The only problem is DHCP (you'll have to type IP/etc manually) and speed. Stability is great.
 Panasonic Let's note CF-W5
Core Solo 1.06GHz Tested with 10.4.5 Myz + 10.4.6 Patch
Everything works fine except Sound(SigmaTel 9200) and WLAN(Intel 3945ABG Mini PCIe).
 Samsung X20 V
Installed from JaS 10.4.6 Intel Pentium M 1.73GHz, 1024MB RAM, 80GB EIDE, Intel GMA 900 graphics LAN working, WLAN not working
 Sony Vaio VGN FJ170
Installed from JaS 10.4.6
Intel 740 processor, 1024MB Ram, 100GB SATA harddrive, Intel GMA 900 graphics
Recommended: before installing, if not dual booting, boot into XP and choose an acceptable screen brightness, as it cannot be changed under OS X.
- During Install
Apply SSE2 Patch and GMA900 Patch
- Post Install
If you encounter trouble booting, try deleting IOUSBFamily.kext by booting with the DVD in the drive and doing the following (please note that this will render USB inoperable):
Utilities > Terminal
cd /Volumes/<your volume label>/system/library/extensions
rm -rf IOUSBFamily.kext
Remove DVD and reboot
- Not working: USB (support removed to boot); PCMCIA; sound; keyboard hotkeys (no surpise); wireless (part of the centrino branding, again, no surprise); power management (fan, baby! better download insomniaX - bastard will get hot and go into sleep mode); memory stick reader; webcamera.
caveats: touchpad support is kind of wonky - doesn't support tapping or dragging windows and jumps around a bit if you keep your finger on it.
These issues aside, works with wired ethernet and third-party power management kernel extensions just fine.
Waiting on broadcom adaptor to test wireless. (Update: broadcom 1300 series adaptor works perfectly with wireless patch added on install)
 Sony Vaio FS660/W
Installed from JaS 10.4.6 Added Intel 003 Sec update
Sound (Realtek HD, vendor 10EC, device 0260) worked on install, video & 1280x800 w/ MacVidia drivers. Traded Intel for Broadcom wireless, detected as airport extreme.
ALPS Trackpad 2-finger scrolling (with driver, see forums) works extremely well.
Not working: keyboard hotkeys, probably never will--sony's proprietary s/w controls those. This also means display is stuck at max brightness. Memory stick reader doesn't work, PCMCIA slot (104C, AC8E) is probably fixable but I don't use so not looked into.
Relatively smooth install; no QE & CI yet but pretty compatible considering its a Vaio.
Battery life is pretty low--around 1.25 hrs with display stuck at max.
I have this notebook and wireless dont work. Trackpad works well. usb work. sound work. cpu xbench 60 aprox. jas 10.4.7.
 Sony VAIO VGN A290
Centrino (1.8 GHz Pentium M, 1.5gb, 100GB, DVD+-RW, Radeon 9700 Mobility, 17" Widescreen LCD (1920x1200))
DONT install the mobility driver from JAS 10.4.6 I just got a black screen.
What works: mouse, usb, ethernet,
I am able to get my full 1920x1200 resultion with the callisto 003 fixed build of the driver, and then modding the ATI9700GA.plugin package as stated in the faq section of the callisto driver, to get full QE and CI support. The key for me getting the driver to work was getting the 128bit hex code for the display, I'll psot it here to save anyone the trouble. ***ONLY FOR THE 17" VGN Screens
Raw EDID base
00 FF FF FF FF FF FF 00 36 7F 26 00 00 00 00 00 00 00 01 03 01 28 1E 00 F2 00 00 00 00 00 00 00 00 00 00 21 08 00 31 40 45 40 61 40 71 40 81 40 A9 40 00 00 00 00 86 3D 80 E0 70 B0 0C 40 58 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 CC
I used the ACPICPUThrottle kext to get some speed step action going.
DVD burning works Firewire, works Powermanagement.bundle works well also for the battery icon.
to get wifi working I replaced the mini-PCI card with one from a dell (truemobile dw1350) I then had to use a modified OI80211family.kext
I installed from the JAS 10.4.6 disk.
 Sony Vaio TR1a
Centrino (900MHz Pentium M, 1024MB, 30GB, DVD/CDRW, 10.6" TFT)
Installed from JaS 10.4.6.install.dvd.iso
Performed install with external USB keyboard and mouse. Then set up onboard keyboard by adding these two lines at the end of the file "/etc/rc", just before "exit 0":
kextunload /System/Library/Extensions/ApplePS2Controller.kext/Contents /PlugIns/ApplePS2Keyboard.kext kextload /System/Library/Extensions/ApplePS2Controller.kext/Contents /PlugIns/ApplePS2Keyboard.kext
Works: USB, keyboard, networking, optical drive, 1024x768 res, USB mouse, power management icon
Does not work: sound, wlan, trackpad, 1280x768 res
Not tested: modem, camera, memory stick slot
The power management was enabled by downloading: http://www.nedprod.com/Niall_stuff/MacOS%20X/PowerManagement.tar.gz
Unpack it, giving you a PowerManagement.bundle. Open /System/Library/SystemConfiguration. Delete the existing one first, then copy in the new one. After rebooting, MacOS X should recognise the laptop and display a battery indicator in the top menu bar. Thanks to keithpk for this improved PowerManagement.bundle. This package came from the excellent 10.4.6 guide at: http://www.nedprod.com/Niall_stuff/MacOS%20X/index.html
This laptop has a native 1280x768 resolution that is not implemented in the BIOS (how nuts is that?) It can be made to work at 1280x768 in Linux with an on-the-fly startup BIOS patch, which possibly could be ported if one knew the details (and of course in Windows with the obligatory proprietary driver...). So it happily ignores any possible suggestion obtained from a thorough forum search here.
Sound is detected as AC97, comes up in the Audio & Midi tools, Volume slider works, but...no sound. Trackpad .kext loads fine, but the trackpad does not respond. In both cases the proper PNPIDs were added to the appropriate .kexts to no avail. I will try a supported USB WLAN adapter in the 2nd USB port. More to follow...
 Sony VAIO S360
Centrino (1.7 GHz Pentium M, 512MB, 80GB, DVD-CDRW, Radeon 9700 Mobility, 13.3" Widescreen LCD (1280x800))
Used the JAS 10.4.6 install CD with the SSE2 options (the mobility drivers on the disc cause video problems). Installation required a USB keyboard and mouse, and the /etc/rc file had to be modified to permit the use of the notebook keyboard.
The ALPS Trackpad and keyboard works when the OSX installation is made the active partition in the Acronis Suite's boot loader. Unfortunately that causes problems with the Windows XP partition. To allow the dual boot + trackpad use I had to enter the Windows XP recovery console and use the "bootcfg /rebuild" command. Now using Acronis, dual booting with a working trackpad including sleep on the windows side works!
Callisto .005 HAS been successfully installed, and QE/CI can be enabled. Finally, widescreen (its beautiful)!!
Power management also works (follow the link from the above-mentioned Sony notebook).
Wireless is not working yet with the Intel 2200 B/G, but hope remains for the Aroman project! Wireless DOES work when using the Dell Truemobile 1350 (it will fit snugly in the s360 mini-PCI slot) with the modified IO80211Family.kext.
 Sony VAIO VGN FE550
Centrino Duo T2300 1.66GHz 2*512 667MHz DDR2 GMA950 13.3" Widescreen LCD (1280*800)
OSX Version: HoTiSO 10.4.6 no extra driver installed. Updates with JaS 10.4.7 and 10.4.8 Touchapd works but no tapping, to enable use FFScrollPS2 (search for it in forums). Bluetooth works. Widescreen works and external vga detects displays (editing on a 1440x900 right now). QE/CI works. Ethernet: Go into IONetworkingFamily.kext/Contents/PlugIns/AppleIntel8255x.kext/Contents/ and add 0x10928086 to the Info.plist. Memsticks works with add in card that came with computer. No Sound (Sigmatel). No Wireless (3945ABG).
 Sony VAIO VGN FS790
Pentium M 7.73 512mb ram 60 gig HD
OSX Version: JAS 10.4.6 installed sse2 and network drivers at install. Touchpad works but no tapping Widescreen works Ethernet works great No Modem Great Sound No Wireless (Intel 2200 BG). Need paperclip hack for video No sleep!
 Sony VAIO VGN S2XP
Centrino (1.8 GHz Pentium M, 512MB, 80GB, DVD+-RW, Radeon 9700 Mobility, 13.3" Widescreen LCD (1280x800))
First of all DONT install the mobility driver from JAS 10.4.6 - you wont be able to see anything.
Works out of the Box: LAN, Bluetooth, ATI Grafics Works: Keyboard (see above), Resolution 1280x800 (with callisto 003 fixed), Power Management (see above)
DONT WORK: ALPS Touchpad (it's impossible! the arconis thing works only for 10 secs and only if it's not combined with the Keyboard kext reload), Sound (Intel ICH4 - 8086 24c5) (Speakers and output seems to be on Channel 1+2, OSX only detects Channel 3+4) Wifi (BG2200 AND Ralink 2500 MiniPCI Card), Modem, Memory Stick, PCMCIA Slot
for more details see: http://forum.osx86project.org/index.php?showtopic=19770
 Sony VAIO VGN SZ13C/B
Centrino Duo T2300 1.66GHz 2*256 533MHz DDR2 GMA950 13.3" Widescreen LCD (1280*800)
OSX Version: HoTiSO 10.4.6 no extra driver installed. Everything is under default setting. Touchapd and Bluetooth works. Widescreen did not work, screen works under 1024*768. QE/CI works. Not work: Sound / Ethernet.
It's far from pratical for me. I'll try some 3rd party driver and patchs later on.
 Sony VAIO VGN-SZ430n/b
Intel Core 2 Duo 2GHz 2GB DDR2-533, Intel GMA 950 / NVidia go7400 Graphics Cards 13.3" WXGA (1280x800) JaS 10.4.6 with PPF1 patch
USED - Jas PPF 1 patch, SS3, INTEL 900,. Working out of box: WXGA resolution with QE/CI with GMA950, Requires user to enter cmos and enable computer to use the whole lcd screen. It's an option in the cmos. (enter cmos F2).
MAKE SURE IT'S SWITCHED TO STAMINA MODE BEFORE INSTALLING OR RUNNING MAC OS. Stamina mode enables the intel card to boot, and you get resolution at 1280x800 instead of useing the unsupported nvidia card that remains at 1024x768 When booting at speed mode switched..
Touchpad(moving and clicking-NO TAPPING), Bluetooth working out of box, Power Icon works with power management patch. Sd Card reader works. Cd rom works. Havent burned anything yet. Quartz Extreme works great with intel side of computer.
Not working: wireless, no PCMCIA power:( ), SigamaTel audio(not attempted). Networking not yet attempted.
Any advancement to this project of getting the VGN-sz430N working Let me know. I need sound and wireless somehow. email@example.com
 Sony VAIO VGN-SZ120P
JaS 10.4.6 with PPF1 patch
Intel Core Duo 1.83GHz 2x512MB DDR2-533
Video: 950GMA (Stamina Mode) works out of box. Need 3rd party app to set at 1280x800
Video nVidia Geforce Go 7200: Works in Vesa 3.0 Mode, MacVidia Patch works, but removing IONDRV framework disables QE/CI on 950GMA
Audio: Sigmatel HDA AC97, not working.
Bluetooth: Works Out of Box
Networking: Modified AppleYukon kext.
Wireless: No Support for Intel 3945ABG
Power Management Patch Works
No Biometric Support
Keyboard and Trackpad works. Although OS X has typing issues for some odd reason.
 Synnex BTO Build To Order M-01
Centrino (1.3GHz Celeron M, Intel855GME, 768MB, 40GB, DVD/CDRW, 1024*768 14" TFT)
Easily Install 10.4.6 with Intel SSE2 patch.
VGA - Intel 82855GME VESA 3.0 1024*768 no Core Image, Quartz Extreme.
Audio - VIA VT1612A No problems but keyboard's volume control doesn't work since in 10.4.1 it works.
Lan - Realtek RTL8100C(L) Works fully.
Keyboard + Synaptics Touchpad(PS/2) - Works fully but the Touchpad Disable button can't be use.
Wireless Lan - Intel 2200BG doesn't work.
Battery - It didn't detect as laptop so the battery bar won't be show.
 Toshiba Satellite A45-S121
Celeron 2.8 (SSE2); 1 GB Ram; 15" TFT; Intel (Integrated) Extreme Graphics 2
Working: USB; Keyboard; Trackpad (no touch functions); Graphics (only will use VESA), detects 128 MB of VRam, No CI, QE. 1024x768 Only; Keyboard; Ethernet
Audio - Works by doing the following. 1. Boot into the BIOS (Escape during startup, then 'F1') 2. PGDWN; Change the option that reads hardware 'setup by OS' to 'all devices' 3. Save and reboot; sound will work (detects as AC97)
Not Working: PCMICA Card Slot
 Toshiba Satellite A60
Mobile Intel Pentium 4 nordwood 3.2 ghz (SSE2), 512 RAM, TOSHIBA motherboard
Chipset: ATI CAB3
Southbridge: ATI SB200
Install DVD Won't boot (boot.plist ERROR) due incompatible hardware configuration; HD is Primary Master (1st IDE channell) and DVD unit is Secondary Master (2nd IDE channel).
Installed using VMware to a real AF partition (created with DISKPART).
... and this guide also worked fine:
Dual-booting winxp/osx using Acronis Boot Selector
* ATI Radeon Mobility 7000 IGP video card, dev ID=1002-4437, works with VESA 2.0 divers and Callisto build 003 or 006 (1024x720) No QE, no CI. Is Recognized as a PCI card (no AGP). So far AgpGart driver wont work.
* ATI SB200 AC97 Audio Controller, dev ID=1002-4341 works with ATI sound driver effort No Full-Duplex. Some problems with Quicktime playing AVI files.
* ATI SB200 PATA-100 IDE Controller, dev ID=1002-4349, works with Zappadoc's ATA driver.
* Keyboard , USB Mouse & Synaptic Trackpad (gestures enable) works with no fixes.
* Realtek RTL8139 Ethernet Adapter, dev ID=10EC-8139, works with no fixes< Dependencies error reported in the System Profiler. But works.
* ATI SB200 USB Controller dev ID=1002-4345, 4347, 4348 (only USB 1.0.)
* Firewire Texas Instrument dev ID= 104C-8026, detected. Not tested.
*Atheros Wireless (AIR Port) dev ID=168C-0013. Not tested but seems OK. Picks up signals from my neighbors.
*Powersaving working with Powersaving.bundle and RadeonTool.kext
* AGP Controller (ATI Radeon 7000 RS250M) dev ID=1002-7010
* ATI SB200 AC97 Modem Controller, dev ID=1002-434D
* CardBus Texas Instrument dev ID=104C-AC50
 Toshiba Satellite A75-S206
Mobile Intel Pentium 4 518 Prescott 2.8ghz (SSE3), 1gb RAM, ATI motherboard
Northbridge: ATI RC300M
Southbridge: ATI IXP 200
Won't boot w/o Legacy USB support turned off.
Installed 10.6.4 goatsecx DVD using vmware 5 and physical partition in winxp, and tri-booting winxp/ubuntu dapper/osx using grub
* ATI Radeon Mobility 9000 IGP video card, devid=1002-5835, works with Callisto build 006 (1280x800)
* ATI SB200 AC97 Audio Controller, devid=1002-4341 Subsys 1179-FF01, works with ATI sound driver effort
* ATI SB200 PATA-100 IDE Controller, devid=1002-4349 Subsys 1179-FF01, works with Zappadoc's ATA driver, had to remove AppleGenericPCATA.kext
* Atheros Wireless Adapter, devid=168C-0013 Subsys 144F-7064, Atheros driver loads using 10.4.5's IO80211Family.kext, but card is not detected initially. You need to go to System Preferences>Network, and you get a message that an airport card is detected.
* Alps Glidepoint trackpad works with no fixes as generic ps2 mouse, trackpad options including 2-finger scrolling, edgescrolling, drag lock etc. are enabled and work perfectly with phb's Alps Glidepad beta driver RC1
* Realtek RTL8139 Ethernet Adapter, devid=10EC-8139, works with no fixes
* ATI SB200 USB 2.0 Controller, devid=1002-4345 (also 1002-4347 and 1002-4348, not usb2.0?), works (I believe using 10.4.3 USB kexts, or whatever goatsecx 10.4.6 installs)
* Power management with PowerManagement.bundle
* AGP Controller (ATI Radeon 9000 IGP RC300), devid=1002-5838
* ATI SB200 AC97 Modem Controller, devid=1002-434D Subsys 1179-0001
* ENE Tech. CB1410 Cardbus Controller, devid=1524-1410 (PCMCIA)
 Toshiba Satellite A100 Series
Intel Centrino Duo 2.0 Ghz (SSE3), 1GB 667MHz, ATI X1300, Bluetooth, WiFi
Trouble-free install with 10.4.6, upgraded to 10.4.7
Bluetooth (Iffy, it worked and then stopped and I haven't gotten it back)
10.4.6 runs fine
No Radeon Mobility X1600 support (PCEe)
No installation on external USB drive
 Toshiba Satellite Pro L100
Intel Centrino T2300E, 512MB, Intel 945GM Express, Wifi
Installed fine from Goatsecx using GMA900 support.
Only things not working are Wifi (Intel 3945ABG) and Sound (Intel/Conexant Hi-Def). Wired network (Realtek RTL8139) works fine. Have not tried battery meter, pcmcia or modem.
 Toshiba Satellite M105-S3041
Core Solo T1350, 512MB, Intel 955, GMA950 - Widescreen 14.1
Installed fine. Started in native WS resolution, ran quickly. I was surprised after reading about graphic problems people had.. Wifi, Ethernet and sound do not work but that's about it, everything else works great. Didn't need VGA monitor.
Hibernates when I close the laptop. Touchpad 'double tap' and other features don't work initially, but after closing the laptop and resuming from hibernation the touchpad works fine. Stable, battery meter worked with hacks. Tried a few things for Wifi and it was a no go. I'm sure I can get ethernet and sound working if I tried.
 Toshiba Satellite M40X-141
Celeron M370 1.5Ghz (SSE2, XD), 512MB, Intel 915 chipset, Intel GMA900 graphics
Everything works perfectly out of the box except display: sound, network, wifi... You HAVE TO boot with a VGA monitor connected, or it won't work. I'm NOT ANYMORE working on that (i managed to have it work perfectly under 10.4.3, but i didn't manage to do it with 10.4.5 or later). Installed hacked battery monitor and touchpad driver. CPU seems to run at full speed all the time, fans are running at half or full speed all the time, annoying.
 Toshiba Satellite M45-s265
10.4.6 Jas Install with GMA900 support+SSE2 Pentium M730 1.6Ghz (SSE2), 512MB, Intel 915 chipset, Intel GMA900 graphics
Works under VMware(going to try native install) 1024x768 Audio patchy works slowly. Not worth my time to install any programs native install doesnt't work for universal-10.4.5 , JaS-10.4.6, and deadmoo image; if trying to boot it from dvd the following system file can not found -if I remember correctly- system.boot.plist If I try use vmware to install a vm with hard disk access and try to boot it natively, boot hangs when probing hardware just after a line about ICH6-M SATA
 Toshiba Satellite P25 S509
- Intel Pentium 4 2.8GHz (SSE1 + SSE2)
- RAM: 1 GB DDR2 + 256 MB DDR2
- IDE Hard Disk.
- Nvidia GeForce FX Go5200 (17 inch Display)
- USB 2.0
- Atheros WiFi
- Realtek Ethernet
- OSX Version: 10.4.6 Maxxus (SSE2)
- Nvidia GeForce FX Go5200 @ 1024x768
- USB 2.0
- Atheros WiFi
- Realtek Ethernet
- Very occasionally crashes for unknown reason (after a few hours when not in use)
Working, user action required
- Display starts out only allowing one resolution. To get OSX to fit the whole screen at proper resolution and have other display size options install the current verison of the MacVidia Driver with it's installer (1.0.81 as of now)
- FireWire PCMCIA Card
- Internal 4 pin FireWire
- Output to External Monitor
- Card Reader (SD/MS/MMC/SmartCard)
- Internal Modem
- COM Port
- Serial Port
- If you need Adobe CS3 you can install it by changing the system version to 10.4.8 in /System/Library/CoreServices/SystemVersion.plist, as SuperUser
 Toshiba Tecra A3
10.4.6 Jas Install with GMA900 support+SSE2 Pentium M 1.73Ghz (SSE2), 1024MB, Intel 915 chipset, Intel GMA900 graphics
Installer DVD will boot with parameters: -v -x platform=ACPI|X86PC But only when network cable is unplugged, and only if there is an unformatted partition created for OSX. Assuming the above conditions are met, a full, normal install is possible, but the resulting OS will not boot. If installed on first (or only) partition, then the result is a blinking cursor and no boot. If installed on second (or later) partition, then the result is "HFS+ partition error" and no boot. tried pretty exhaustively to get this going, and could not make it work.
 Toshiba Tecra M2-S630
- CPU: Intel Pentium M 1.7GHz
- RAM: 1 Gb DDR (2 512 Mb Modules)
- HDD: 60 Gb ATA/100
- VIDEO: Nvidia GeForce Go5200
Installed JaS 10.4.6 with SSE2 (10.4.8 was very buggy)
Works by default:
Built in audio
Video @ 1024 x 768
Works w/drivers or tweaks:
Video @ 1400 x 1050 (with MacVidia 1.0.81 driver)
Does not work:
Integrated Wireless card
Any video requiring acceleration (DVD playback, 3d screensavers are extremely slow)
 Toshiba Tecra 9100 Series
Model: Tecra 9100 Pentium 4 1.6Ghz 256Mb 20Gb 1024x768 14"
Audio - Set in BIOS: Hold ESC whilst booting, then press F1 as per instructions. Its on second page - press PGDN under CONFIGURATION.
Power Management - with patched Power Management bundle <p> Doesnt work:
Wireless - Has Toshiba Mini-PCI WLAN card. Comes up in PC Card list but WLAN driver doesnt recognise
PC Card slots (x2)
SD Card Slot
 Toshiba Portege M200 Series
Model: M205-S810 Centrino 1.5GHz 768MB 60GB 1400x1050 12"
Booted JaS 10.4.6 install using friend's Toshiba Tablet Multi Dock. Installed Intel SSE2 patch.
Audio - Set in BIOS: Hold Esc while loading, then press F1. Press PgDn for next page. Under
CONFIGURATION, select Device Config. = All Devices. Press End and Y to save changes.
Graphics - NVidia G-Force FX 5200 with MacVidia driver - native 1400x1050
Wireless - Replaced OEM Intel MiniPCI with Dell Truemobile 1350
Trackpad - with patched driver
Power Management - with patched Power Management bundle
Wacom Tablet Digitizer (Serial connection)
OEM Wireless LAN - Intel 2200BG
SD Card Slot
PCMCIA Card Slot
Model: M200 Centrino 1.6GHz 1024 MB
Audio - used workaround on http://wiki.osx86project.org/wiki/index.php/Audio
Graphics - NVidia Gforce FX 5200GO with MacVidia driver - 1400x1050; external monitor all garbled up
Trackpad - worked out of box
Wacom Tablet Digitizer
OEM Wireless LAN - Intel 2200BG
This page was last modified on 7 November 2013, at 11:38.
This page has been accessed 772,728 times.