HCL 10.4.7/Portables

From OSx86
Jump to: navigation, search
OS X 10.4.7
Hardware Compatibility

This is a hardware compatibility list for portable computers. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying a portable computer. Don't forget to add how you got OSx86 running on your portable x86 computer, and to use proper English. Please see the discussion page for proper instructions on how to input your system specs. Also, please contribute to the HCL 10.4.7 page, which should list a more granular view of compatibility. If your computer isn't listed, you should try it if you have a SSE2 or higher processor. Kernels are available for most configured machines

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for 10.4.7 builds only.

Please list your computers in alphabetical order by manufacturer (Asus, Acer, Dell, HP, etc)

For how to edit the Wiki, please see this thread. Thank you!

Note: Please add whether your device supports QE, Quartz Extreme, graphics. Try playing a movie with Quicktime Player.

See the x86 software page for programs you can run without Rosetta.

Contents

[edit] Acer Aspire 1692WLMi

Running MacOSX 10.4.7 upgraded from 10.4.4. Installing MacOSX presented no issues whatsoever. What works: A lot of stuff including sound, touchpad, all USBs, DVD+-RW, Ethernet Broadcom 5788 (with AppleBCM5701Ethernet.kext patched), Video drivers (ATI Mobility Radeon x700), can watch videos perfectly (DivX, Xvid, WMV). It's really nice having Mac OS X almost fully working now, I have Office, Adium, iLife. What doesn't work: Card Reader, Resolution 1280x800 (really, really a shame), Intel Wifi, Conexant Modem.

[edit] Acer 5672AWLMi

Intel Core Duo T2250 (1.73Ghz, 533Mhz FSB, 2Mb L2 cache), 15.4 WXGA Lcd (16ms), Ati Mobility Radeon X1600 512Mb, 120Gb Sata HDD, Pioneer Slot-in DVD-DL drive, 1 Gb DDR2, Intel Pro wireless 3945 abg, Logitech orbicam 1.3 MP


Installed MacOsX 10.4.7 Jas, X1600 QE/CI ok but not change resolution, only 1024x768 (don't use borisbrandenov pach -> black screen), Audio Patched (see forum about Realtek ALC audio, need to change Device ID) but no mic, Usb ok, PCMCIA ok, DVD-DL ok, Webcam ok, Trackpad, Audio control button ok, Firewire ok, not working Broadcom 5789 ethernet ('memory map' error with the Niasa-it patched kext), not working intel 3945 abg. Replace the intel wifi mini pci express card, with an atheros minipci express wifi card.


[edit] Aspire 3023 wlmi

AMD Sempron 3000 1.80ghz,ATI X200 chipset, 512mb ram, ATI mobility X700 128mb;


-Native: works only with myzar 10.4.6 DVD with 10.4.7 upgrade ,jas dvd install but after reboot waiting root device


Audio works very well , video nothing to do [dont work] and wifi when she wants, you must disable from bios infrared and usb legancy

[edit] Acer Aspire 3628AWXMi

I used The Mac OS X Jas 10.4.7 (To be exact the name of the torrent is Mac-OS-X-10.4.7-AMD.Intel-(JaS)-ISO-Repack), I installed the SSE2 patches, 10.4.7 Combo update, GMA 900 Support, Wireless.


Intel Pentium M 735A 1.73GHz Dothan Core with MMX, SSE, SSE2. 2MB L2 Cache

512MB DDR2 SDRAM RAM

Mobile Intel 915GM/GMS,910GML Express Chipset Family with Intel Graphics Media Accelerator 900 (QE works, I was stuck at a blue screen, but after seeing the paperclip/VGA dongle on InsanelyMac. I coldn't make a VGA dongle and the paperclip didn't fit so I used two thin wires, It Worked!)

Realtek AC97 Audio (works)

Realtek RTL8139/810x Family Fast Ethernet Nic (works)

SlimType DVD Drive (works)

Synaptics Touchpad (Works)

ST98823A - IDE Hardisk (Works)

Broadcom Bluetooth (Doesn't Work)

Intel 82801FB/FBM USB Univeral Host Controller

Intel 82801FB/FBM USB2 Enhanced Host Controller (They both Work so the USB Ports work Plug-n-Play works)

Intel Pro/Wireless 2200BG (Works! Found a driver Here)


What can I say it's usable Wireless driver a bit slow, but hey It works. I'm Dual Booting Windows XP and Mac OS X and I'm happy with the result.


[edit] Acer Aspire 3623NWXmi

Mac OS X 10.4.7 JaS (takes a long time to load the installer... wait. Installed Intel SSE2, GMA900, Wireless support)


Intel Celeron M 370 1.5Ghz


256MB RAM (recommend upgrade)


Intel GMA900 (Quartz Extreme working, needed the "paperclip"/VGA dongle: bridge pins 1-6,2-12, otherwise stuck at blank blue screen)


Realtek AC97 Audio (works, detected as Intel)


Integrated Realtek 8139 Ethernet (works)


Atheros 5005 Extended Range (works with kexts from Apple 10.4.5 update)


LG OEM DVDRW (works)


Some issues with Sleep (like when closing lid), I believe they're linked to the lack of RAM.


This was a cheap laptop, $509 canadian, came with some basic linux preinstalled, good system for OSX.


[edit] Acer Aspire 3623WXCi

Installed JaS 10.4.7 with the combo update, Intel SSE2, GMA900 and wireless packages. Overall, very impressed. Video effects are very smooth the overall system is very fast. Good system for an easy OS X installation.


- Intel Celeron M 1.5GHz


- 512mb RAM


- Intel i915M GMA900 video with 1280x800x32 + QE and CI working out of the box with NO .plist tweaks

(Set BIOS boot options for video to "BOTH" and hook up an external monitor - dongle just gives a blue screen)


- Sound works as well as keyboard Fn keys for sound volume


- Realtek 8139 ethernet detected and working on "en0"


- Atheros Wireless detected and working as "en1" AirPort AFTER copying over the 10.4.5 IO80211Family.kext


[edit] Acer Aspire 3690

Worked great aside from a human error. After I finally figured out what I didn't do, it worked properly. Full 1280 x 800 resolution. DVD Burner works fine, Touchpad works fine. Wireless internet works great, and I was getting speeds over 100 KBs on a download. Haven't tried wired internet at all, or the card reader. Everything I've tried works awesome. . .

[edit] Acer Aspire 5500z

Intel Pentium M "Dothan" Processsor 735 (1.7Ghz, 400Mhz FSB, 2MB L2 Cache), Intel Integrated i915M GMA 900 (128MB), 80GB Toshiba HDD, DVD Dual Layer, 1GB DDR2 RAM, 802.11b/g Wireless


Mac OSX wouldn't boot on the internal DVD Dual Layer drive, but it worked with an external Packard Bell DVD-ROM. The first time we installed (wrong), we didn't need an external monitor/VGA dongle. But the second time and on, we needed one. So now it works with a VGA dongle. Intel i915M graphics card is working perfectly and is fully supported with an extra driver! Sound works out of the box, only WLAN doesn't work - need to check this out -.


[edit] Acer Travelmate 2428 AWXMi

Intel® Pentium® M Prozessor 740 (2MB L2 Cache/ 1.73GHz/ 533MHz FSB), Intel® 915GM - Intel® PRO/Wireless 2200BG, 14.1" WXGA TFT Display, Intel® 915GM with Intel® GMA900 up to 64MB, 256MB (2*1024) DDR2, 60GB HDD, DVD-Dual Double Layer, 10/100 LAN, WLAN 802.11b.


..first had to "dongle" (see forum dongle/blue screen) and then: perfect (a real BIG "thank you", JaS!!!) - no problems at all. fixed wlan by buying a 15€�broadcom-mini-pci (4306), ethernet works, modem doesn�t (doesn�t matter @ll), audio "not available" but works fine, screen-resolution 1280x800x32 - qe & ci enabled, slimtype-dvd-ssw8015s burns just via toast, trackpad/keyboard(fn-keys) work fine.. happy ;-)

chosen patches: intel update 10.4.7, intel sse2, gma900.


[edit] Acer TravelMate 252LMi

An Acer TravelMate 250 clone, with P4@2.6GHz & 512MB Ram.

Working parts are :Of course the HDD (IDE 60GB), the sound it's ok after reloading the AppleAC97Audio.kext, the LAN works great at full speed, all USB ports working, DVD-RW working .

Non working parts are : WLan 802.11b, modem, PCMCIA and battery not recognized (yet!).

[edit] Asus A2000Series (A2C)

Intel Pentium 4 2,800GHz (SSE2, PAE) 512RAM (256MB Base) Ati Radeon Mobility 9600 64MB, Audio AC97, Ethernet SiS, Hd Hitachi 4200RPM.


Installed with 10.4.6 boot -x after installation callisto for video card MacOSX boot in native;


Audio: AC97 ID:7012 Work with [1];


Video: Work QE/QE2D/CI OpenGL with CallistoBuild005 and AGPGart [2];


Ethernet SiS900: (incompatible harware);


Firewire: Work;


Trackpad: Work;


Keyboard: Work;


ACPI: Work;


USB: Work but no mouse usb and pendrive, only hd and wifi (Use USB hub to access removable SCSI drives);


Hd 40Gb Hitachi For Enable UDMA sis Chipset [3];


[edit] Asus W6A

Using 10.4.6 HotISO patched update to 10.4.7 with Jas patched for intel

Intel Pentium M 740 1.73Ghz (working 100%)

Hard driver PATA (working 100%)

TouchPad (working 100%)

USB2 (working 100%)

CD/DVD (working 100%)

FireWire (working 100%)

Graphic card Mobile Intel 915GM/GMS, 910GML Express Chipset Family (working 100%)

Sound Realtek HD Audio (not working)

Network card Realtek RTL8139/810x Family Fast Ethernet NIC (working 100%)

Wireless Intel 2200BG (not working)

Wireless Netgear WAG511 (working as an Airport with the IO80211Family.kext from 10.4.5)

Card reader (not tested)


[edit] Asus Z71V

OS: JaS 10.4.7

Chipset: Intel 915PM ("Alviso-PM") / ICH6-M

CPU: Pentium M 725 Dothan (600-1600) O/C to 800-2130 (SSE2)

RAM: 512 Meg Hynix DDR2 || NEC 6550A DVD burner

Sound: Intel HD Audio "Azalia" chip (Realtek ALC880) - working

Video: Nvidia GeForceGo 6600 PCI express - no CI/QE... yet (macvidia)

Wired network: Marvel Yukon Gigabit NIC (88E8001) - working with m.musashi driver 0.2d

Wireless network: CM9 (AR5221) wireless - not currently working

USB: Working

Trackpad: Multiple fingers support and scroll areas not working

Modem: Connexant HDAudio SoftV92 56K AC'97 Data Fax Modem - not tested, doesn't show in the system profiler

Other: built-in SD/MMC/MS/MS PRO reader - not tested

Booting from an external USB drive


[edit] Compaq Presario V4000

JaS 10.4.7 Upgrade Package w/ SSE2 Patch after 10.4.6 Install DVD (Upgrade) after Jas 10.4.3 Install DVD

CPU: Intel Celeron M (1.5 GHz, 1.6 GHz Bus Speed reported from Profiler)

Graphics: 1280x800 Working with Quartz Extreme ( with dongle after Quartz Debug toggle )

Ethernet: Working ( perfect )

Audio: Working ( AC97 permissions fix )

Wireless: Working ( 1080211Family.kext and AppleAirPort2.kext fix )

DVD: Working ( perfect )

USB Wireless Modem: Working after Novatel720.dmg ( Sprint Novatel U720 )

Trackpad: Working ( perfect )

USB Wireless Mouse: Working ( Kensington Ci65m )

Keyboard: Working ( perfect )

Battery Indicator: Working ( PowerManagement.bundle fix )

[edit] Compaq Presario C554TU

JaS 10.4.7 Upgrade Package W/ Intel SSE3 Patch, Intel GMA900 & wireless support package Using JaS 10.4.4 Install DVD

CPU/RAM: Intel Celeron M 18.ghz; 2GB DDR2 RAM - Working

CHIPSET: Intel 945GBM w/ Intel ICH7.

GRAPHICS: Intel GMA950; w/ Quartz Extreme, 1280x1024 - Working

AUDIO: Conexant HD Audio; working w/ 2ch output via Apple Azilia Patch.

NETWORK: BROADCOM MINI PCI-E 4311 WIRELESS; Not working. REALTEK Rtl8139 PCI Fast Ethernet NIC; Working.

CD/DVD: Toshiba TSSTcorp CDW/DVD TS-L462D; Working Perfect.

USB 2.0: Working.

Battery Meter: Needs Powermanagment.bundle fix

Keyboard/Trackpad: Synaptics Touch Pad, Keyboard both work fine.

Modem: Conexant Modem 56KBPS - Not tested.

[edit] COMPAQ PRESARIO R3112EA (R3000 Series)

Mac OS X 10.4.5 by Myz (UPDATED TO 10.4.7 by JAS) Laptop Intel Celeron 2,8 Ghz bus 400 Mhz, 2 GB RAM DDR-333, 160GB HDD, Aty Mobility Radeon 9000 IGP (RS300M)128 Mb, XVGA 15,2", 1280x800, Combo drive DVD-CDRW, Soundmax Ac97 Adi1981(b), LAN Realtek Nic RTL8101 series,Cardbus PCMCIA Texas Instruments, Modem, Wireless Broadcom 4301 802.11 b. Dual boot in secondary partition with Darwin v8.9.1, its possible update 10.4.7 by Jas (only 10.4.7 package), sound works with AtiSB400Ac7Audio.kext, VGA native mode 1024x768, don't works QE & CI, touchpad/keyboard detected; Cardbus, USB 2.0, Lan too. Battery run with PowerManagement.kext, activate ATA-ULTRADMA (detected dvd+hd IDE) with AppleOnboardPCATA.kext. Boot fine with verbose mode.

[edit] Dell Inspiron 1300/B130/ME051

JaS 10.4.7 Install DVD, just a plain install with SSE2-Patch for Intel, wireless and GMA900 support package

CPU/RAM: Intel Celeron M 350 (1.5 GHz, 400 MHz FSB); 1 GB DDR2-SDRAM (533 MHz) -- working

Chipset: Intel 915GM/GMS, 910GML Express Chipset Family; Intel ICH5 w/ integrated SigmaTel HDA 9200 -- graphics working with dongle (CI/QE supported), sound does not work

Network: Broadcom BCM440 (wired); Broadcom BCM4318 (wireless, detected as Airport extreme) -- both working

CD/DVD: Toshiba TSSTcorp DVD+/-RW TS-L532B -- working with Patchburn

USB 2.0: integrated in ICH5 -- working


edit: The ME051 also works and has almost the same config as shown above.

The only difference is that sound works by default and it doesn't have the default wireless card.

We replaced it for an Senao NMP-8602 Dual Band Wireless mini-PCI (11a/b/g - 54Mbps)


[edit] Dell Inspiron E1405

See HCL_10.4.6/Portables#Dell_Inspiron_E1405

Patched w/Jas from 10.4.6


wireless: ipw3945 not working but dell 1390 should work

cpu: for (at least) T2300E - no sse3 (says /proc/cpuinfo (in linux) but cpu-z in windows says yes.. hmm)


[edit] Dell Inspiron 6400

JaS 10.4.7 Install DVD, selected SS3 packages during install, applied Kiko's 10.4.8 SSE3 update

CPU/RAM: T2050, 1.6, 2GB DDR2-SDRAM

Graphics - working, no dongle, 1024x768

Network - Broadcom built-in - working, Intel wireless - not working

Audio - Sigmatel - not working

Touchpad - working


Other Inspiron 6400(T2050)


Everething without wifi and Multicore CPU mode!


[edit] Dell Inspiron 8600

JaS 10.4.6 Install DVD, upgraded to 10.4.7 (don't use the software updater). Selected SSE2 patches, SemJaZa decrypts, and wireless. Replaced Intel 2200 with a broadcom that was compatible with 10.4.1.

CPU/RAM: Pentium M 1.4 ghz/ 512 MB Ram

Graphics - NVidia GO5200FX, 1280x800 w/ macvidia drivers

Network: Replaced intel wireless with broadcom - works. onboard ethernet works, too

Audio - working

Touchpad - working, except tap-click and scrolling.


[edit] Dell Inspiron 9300

JaS 10.4.7 DVD. Selected SEE2 patches, decrypts, bla bla... Don't install the custom ATi drivers from the Install disc, screen goes blank

1.7 Ghz Pentium M Centrino

2 GB DDR2 533Mhz Ram

Mobility Radeon X300 PCI-E 128MB Dedicated

Intel PRO/Wireless 2200BG *not working*

Broadcom 440x 10/100 Integrated Controller (Tricky, sometimes need to completely power down the system and then boot into OSX for it to work)

Sony DVD+-RW (No burning, otherwise works)

17" 1920x1200 Native.

Full resolution working with QE/CI enabled - [http://forum.insanelymac.com/index.php?showtopic=26659&st=0&p=202151&#entry202151[

[edit] Dell Inspiron 9400/E1705

JaS 10.4.7 DVD installed in VMWare Server 1.0.1 on XP MCE SP2. Followed VMWare How-to doc here, with the following notes:

  • Choose WindowsNT as the the VM base. FreeBSD will NOT work (you'll get "com.apple.boot.plist not found" error)
  • Choose Custom install for WindowsNT VM, so that you can select IDE as your drive. SCSI drive will not show up once you get to the Disk Utility.
  • I chose NAT as my networking, and 1 CPU.
  • Choose Custom Install for OSX install. Select only Intel-related patches, both SSE2 and SSE3 patches. Do not select ANY of the other patches, especially the ATI driver patch (doesn't work with X1400). If you do, the install will complete but will hang at the gray screen or give you the "you must restart your computer" screen.
  • There is no support for X1400 as of yet. Searched everwhere on Wiki and forums. You'll have to live with 1024x768 for now.


Follow the docs for everything else. The VM runs just fine, but a bit slow and the mouse movement is not smooth.

System:
2 Ghz T2500 Core Duo, Intel i945PM chipset
2 GB DDR2 533Mhz Ram
Mobility Radeon X1400

[edit] Dell Inspiron 5100

Installation Method: Native DVD Installation using 10.4.7 JaS ISO Burned to DVD-R

  • Slow Install
  • Quick Startup Time
  • SSE2 Patch Only
  • It has decent perfomance, but not all the hardware is recognized. No kernal panics were encountered.


Hardware:

  • 2.66Ghz Pentium 4 Processor
  • 256MB DDR 266MHz (PCC2100)
  • ATI Radeon 7500 32MB Video Works, but recognized as Compatible VGA Controller 128MB
  • Sigmatel 9750 Works
  • Cardbus Slot is NOT working
  • DVD/CD-RW Burner Drive Works
  • Both USB 2.0 Ports Work
  • Ethernet is Recognized
  • Touchpad Works as well as the tap-clicking
  • Does not suspend when told to or when notebook is closed. When told to sleep the mouse cursor disapears and hard drive shuts down, but display is still bright. It does not crash though.
  • Battery is NOT Recogized, but can be patched with a different PowerManagement.Bundle being installed.
  • OS X claims that the processor is running at 2.8GHz when infact it is at 2.66GHz, I am not sure if it is actually running at that speed but it does not crash and the fan is cooling properly.


Bios:

A32 Bios


Comments:

  • Runs excellent, but no suspend mode recognition or carbus. These issues further cripple its mobility. If they worked it would be great.


[edit] Dell Inspiron 4150

Installation Method: Native DVD Installation using 10.4.7 JaS ISO Burned to DVD-R

  • Slow Install
  • Slow Startup Time
  • SSE2 Patch Only
  • Works ok, speed is decent, but has some issues. No kernal panics were encountered.


Hardware:

  • 1.7GHz Mobile Intel Pentium - M
  • 512MB DDR 266MHz (PC2100)
  • ATI Radeon 7500 16MB Video Works, but recognized as Compatible VGA Controller 128MB
  • Crystal 4205 Sound Works
  • Wireless Dell TrueMobile 1150 Mini-PCI Card Does NOT Work
  • DVD/CD-RW Burner Drive is recognized
  • USB 1.1 port on mainboard does work
  • Ethernet Recognized
  • Touchpad and trackpoint work, even tap-clicking.
  • Both Cardbus Slots NOT Recognized
  • Does not suspend when told to or when notebook is closed. When told to sleep the mouse cursor disapears and hard drive shuts down, but display is still bright. It does not crash though.
  • Battery is NOT Recogized, but can be patched with a different PowerManagement.Bundle being installed.
  • OS X claims that the processor is running at 2.4GHz when infact it is at 1.7GHz, I am not sure if it is actually running at that speed but it does not crash and the fan is cooling properly.


Bios:

  • Turned off serial ports and printer ports. I am not sure if this helps but it did not hurt.


Comments:

  • Runs good, but it is still not very mobile due to inoperable WI-FI card and no suspend mode recognition. These issues further cripple its mobility. If they worked it would be great.


[edit] Dell Latitude C840

Installation Method:

  • Native install using 10.4.7 Jas Repack ISO. Installed Intel, SSE2, and Wireless Support patches.
  • Dual Boot WinXP/Mac OSX using Darwin Bootloader.
  • Due to a broken DVD drive, the notebook hard drive was placed in a separate desktop and the installation was performed there. After the installation, the drive was placed back into the notebook. The Windows XP installation was backed up on this desktop and restored to the partition created using Mac Disk Utility.


Hardware:

  • Intel Pentium 4 Mobile 1.6 GHz
  • 512 MB Ram
  • HL-DT-ST RW/DVD GCC-4240N
  • AC'97 Audo Controller
  • Nvidia Geforce 440 Go
  • 3Com 3C920 Integrated Fast Ethernet Controller
  • Dell TrueMobile 1150 MiniPCI


Not Working:

  • Dell TrueMobile 1150 wireless card is not recognized by OSX. However a BCM94306MP wireless card was purchased from ebay for $14 and this broadcom card works.
  • Screen resolution fixed using Macvidia 1.0.8. Still no QE/CI (hardware acceleration.


Comments:

  • The speed is pretty good. The dock ripples work fine, however the screensaver fps is pretty slow. Waiting on QE/CI support from Macvidia!

[edit] Dell Latitude D420

  • Core Duo 1.8 (SSE3)
  • 1GB RAM
  • Intel GMA 950
  • SigmaTel STAC9200 Audio
  • Broadcom BCM5752 1Gb Ethernet
  • Dell 1390 WLAN Card (Broadcom chipset)
  • Dell 350 Bluetooth Card

[edit] Running Details

  • JaS 10.4.7 DVD installed without problems but wouldn't run in dual core mode, works fine with single core enabled
  • QE/CI support right out of the box plus native 1280x800 resolution
  • LAN not recognized
  • WLAN card is recognized as an Airport Extreme but does not work
  • Bluetooth is recognized and seems to work
  • It goes in and out of standby properly when lid is closed and opened

UPDATING

LAN - [4]

--Polybius 12:36, 22 June 2007 (CDT)

[edit] Dell Latitude D520

Dual Core 1.66 (SSE2 only), 945GM video, SigMatel Audio, IntelPRO WiFi, Broadcom 440x 10/100 Ethernet


Installed from JaS 10.4.7 DVD straight on new unpartitioned SATA HD, with the 2 cpus activated.

Had to correct one file link error in JaS 10.4.7 installation ( AppleFileServer)

  • Working :

Installation went fine. have to make some reboots. Finder/screen is realy slow. So I disabled one cpu in bios and got a 1.66Ghz performance. (FireWire not tested for now)


Ethernet OK, but seems to be slow.

  • Not Working :

Audio not working, incompatible IntelPRO/WiFi.

On some reboots, got black darwin terminal; but can do reboot with commands sh /etc/rc ; shutdown -r now ;

  • Add-ons working :

IOGear USB-BlueTooth and Logitech BT-mouse OK.


[edit] Dell Latitude D510

Installed from JaS 10.4.6 DVD.

Instructions:




  • Short-cut the VGA plug on you laptop (see [5])
  • When you reach the disk destination screen, run the disk tool from the menu and erase/create a new MAC journal partition.
  • Quit the disk tool and run the terminal tool from the menu.
  • Type "fdisk -e /dev/rdisk0". Than type "f 1" and then write (answering "yes" to the question) and exit the terminal.
  • Continue the installation process and when you reach the screen before you actually install it, you need to customize the installation.
  • Click Customize and pick only whatever drivers you need for the printer you have, SSE2 Intel, Wireless and the first option (can't remember from the top of my head, but it is the generic update).
  • Do the install.
  • After the machine boots up you some things are not working yet (wireless, modem, pcmcia, battery status)
  • To fix the batery - [6] and replace your existing one in /System/Library/SystemConfiguration fix the permissions (disk tool) and reboot.
  • First you need to apply the 10.4.7 Jas Patch (demonoid torrent). To fix the wireless go [7] and the test6 one (latest at this time) and follow the instructions. Make sure you do step 5 in the installation instructions. This driver still has some bugs (hangs on big transfers and it is slow, but it works OK for browsing).




Pentium M Centrino 1.7 GHz (SSE2 only)

1GB RAM

Whole 40GB Disk (1 patition)

Intel 2200GB Wifi Card (Finally working, but with some bugs), etc


Updated to 10.4.7 using JaS package.




Dell Latitude D510


Installed from JaS 10.4.7 DVD.

Instructions:




  • Short-cut the VGA plug on you laptop (see [8])
  • When you reach the disk destination screen, run the disk tool from the menu and erase/create a new MAC journal partition.
  • Continue the installation process and when you reach the screen before you actually install it, you need to customize the installation.
  • Click Customize and pick only whatever drivers you need, SSE2 Intel, don't pick any driver for sound.
  • Do the install.
  • After the machine boots up you will have everything (almost) functionally. No modem at all but Wireless, QE, Sound, LAN, Bluetooth, quite good!




Celeron M 1.5 GHz (SSE2 only)

1GB RAM DDR2

60GB Disk (2 partition)

Intel 915GM Video on board

NEC ND-6650A slim 8x DVD+/-RW

Dell WLAN wireless card

USB

Broadcom 10/100 Ethernet

Serial port

Bluetooth

Alps GlidePoint/StickPointer

JaS 10.4.7

--sierrabeat 02:35, 3 May 2007 (CDT)

[edit] Dell Latitude D600

Dell D600 installed from JaS 10.4.6 DVD - Installed no problem...just don't forget to make the changes during the install.


Pentium M 1.7 GHz (meaning SSE2 only)

1.2GB RAM

20GB Parition

Intel 2200GB Wifi Card (looks like this won't work)


Updated to 10.4.7 using JaS package.


  • Did the ATI fix by deleting the kext's and then was able to get to 1400x1050x32
  • Deleted the sound files and had them rebuild and got AC97 sound back
  • added the powermanagement fix so it displays whatever you had at the time you booted up...doesn't update in real time
  • Had to do the hack to get my network card working - covered elsewhere in here
  • Installed Parallels and got WinXP booting :)
  • Don't install iTunes 7 it won't launch
  • Still waiting for an ATI driver for Radeon 9000 -> Graphics look good, but not accelerated at all

Machine very stable -> Tried going to 10.4.8 - Don't bother until the new Kernel is released for SSE2. It should be out around Dec 24. 2006.


Other than that, I wish my modem worked and ACPI stuff worked. I think there's some more digging for me to do. I'll wait until Kernel 8.8.1 for SSE2 is released before I make any more changes and/or upgrade to 10.4.8.

[edit] Dell Latitude D610

JaS 10.4.7 works out of the box. Need to patch sound,ethernet,wireless,and powermangment.

[edit] Dell Latitude D620

JaS 10.4.7 works out of the box but you need to disable multi-core in the BIOS. No CI/QE support for the nVidia yet. Will work on sound and network. .

Intel wireless 3945a/b/g does not work

[edit] Dell Latitude D800

Dell D800 with Jas 10.4.6 (than updated to 10.4.7) Basic video and sound working out of the box.


Battery indicator can be found here (works on many laptops): [9]


Also got onboard nic working by using the notes here: [10]


And full 1680x1050x32 video support from macvidia driver here: [11]

still no QE yet waiting for update from the group at macvidia


There is also a cool widgit there that will show you your current driver on your system and the driver that is currently availble on-line: [12]


Still no wireless with the intel 2200bg chip


I have a 1.8 Penitum M with 1.25 Gig ram - really snappy performance, takes about 16 seconds to get to the login screen


[edit] Dell XPS M1210

Installation Method:

  • Native, using JaS MacOS X 10.4.6 x86 ISO (which in itself is really a 10.4.4 distro with 10.4.6 updates added during the initial install process) + JaS 10.4.7 Updates for Intel CPUs


Hardware:

  • Intel Core 2 Duo T7200 (2.00GHz)
  • 2GB Dual Channel DDR2-667 (2 x 1GB Modules)
  • 60GB Toshiba 5400rpm SATA HDD
  • DVD+/-RW DL Writer (Sony DW-Q58A)
  • Intel 945PM PCI Express Chipset
  • NVIDIA GeForce Go 7400 with TurboCache (64MB dedicated) PCI Express Graphics
  • SigmaTel HD Audio Codec
  • Broadcom 440x 10/100Mbps Ethernet
  • Intel PRO/Wireless 3945ABG 802.11a/b/g MiniCard Wireless LAN
  • Dell Wireless 355 Bluetooth v2.0+EDR (Broadcom chipset)
  • Ricoh IEEE1394 Firewire
  • WXGA LCD Panel (1280x800)
  • BIOS Version of Laptop is A04


Working:

  • Major components worked after initial installation including:

- Graphics, loaded as VESA 3.0, no CoreImage or Quartz Extreme, fixed at 1024x768 before MacVidia driver install. Properly identified and set to native (1280x800) resolution after MacVidia 1.0.8 drivers are installed.


- 10/100Mbps Ethernet


- Bluetooth


- All drives mounted correctly - HDDs, DVD Writer, USB Flash Drives (when plugged into USB 2.0 ports), external USB 2.0 80GB HDD


- USB 2.0 Ports working with Logitech G5 Laser Mouse


Not Working:

  • SigamaTel HD Audio (there is an audio adjustment slider shown however no sound comes out from the speakers)
  • Intel Wireless LAN not detected (still no drivers at this stage)
  • 5-in-1 Card Reader (MMC/SD/xD/MS/MS-PRO) (built-in)
  • Built in Logitech webcam (part of the A/V Communications package)


Comments:

  • The GUI is quite laggy and choppy before the installation of the MacVidia drivers, and even after the install, screen refreshes are sometimes choppy, and mouse movements jerky. Feels like the system is catching up at times when trying to switch between different applications and windows
  • Still no working Intel PRO/Wireless drivers avaliable, however all Broadcom chipset driven devices (Ethernet, Bluetooth) seems to be happily identified and working (no doubt since most of the proper Macs uses Broadcom components extensively

Photos of working system:

[13]| [14]| [15] | [16]

[edit] Fujitsu Siemens AMILO PI1505

JaS 10.4.7 Install DVD. Installed JaS Patches.

CPU: Intel Core Duo 1.66 Ghz

1Gb DDR2 533Mhz, Intel GMA950

Intel PRO/Wireless 3945abg

MultiCard Reader

Others: Spanish Built-in Keyboard


Working:

VIDEO: Intel GMA950 working. Patch AppleIntel915.kext with vendor and device id for Intel GMA950. Full resolution with QE/CI enabled.

ETHERNET/NETWORK: out of the box. Needed Jas Patch (found on insanelymac.com) in order to access SAMBA/Windows File Sharing Networks.

ACPI: Patched with PowerManagement.bundle found at insanelymac.com. Displays battery meter with percentage and time remaining ok.

DVD: Working fine. Reading and burning.

USB: working. External USB Bluetooth pen working fine. External Logitech Wireless Mouse and keyboard working fine.

TOUCHPAD: working ok out of the box.


Working in some way:

AUDIO: Realtek High Definition Audio (ALC861) - Output only through jack, built-in speakers don't work, not line in, volume slider doesn't work.<

KEYBOARD: Selected Spanish ISO Keyboard Layout. All working except three keys: among them < > key. Trying to solve this with Ukelele.

Sound/mute, bright, sleep keys working. Volume keys don't work (related to problem with volume slider)


Not working:

NETWORK: No Wi-Fi. No solution found yet for Intel PRO/Wireless 3945abg.

Multimedia Card Reader Not working.


[edit] Fujitsu Siemens AMILO Pro V3205

Intel Core Duo 1.6 Ghz SSE3, mobile 945GM chipset, ICH7-M southbridge


Jas 10.4.7 Intel/AMD ISO repack DVD


GMA950 - full resolution (1280x800x32), full QE/CI and dual display (DVI->VGA out). - needed to install GMA900 support pkg to get it working - strange - need 900 support for 950. Without it it doesn't work. Deleting AppleIntel915* kexts kills it too. S-Video not tested.


Ethernet - Intel PRO/100 VE Net.connection (Ekron 10/100 LU82562GZ) - working after adding vedor/device ID into 8255x kext (inside IONetworking.kext->Plugins) (Dev:1092 Vend:8086) Had some stability problems, maybe due to my internet connection.


Modem (HDAUDIO Soft data fax) - not recognized


Wifi Intel Pro/Wireless 3945abg - not supported


Bluetooth - recognized as USB device, bluetooth icon present (turns on/off using keyboard key) - not tested


SATA - fully working, AHCI mode (intel 82801GBM)


PATA - Intel 82801G - fully working (DVD-RW present), DMA on


Sound - Connexant AMON (recognized as Intel High Definition audio) - had to remove AppleHDA.kext and patch Info.plist of Azalia Controller kext (inside AppleAzaliaAudio.kext -> Plugins) for PCI primary match to match mine: 0x27d88086 (in ICH6 section of info.plist; original value 0x26688086)

Output works 2-channel, no input. Didn't try patching original AppleHDA.kext, maybe there is another solution.


Touchpad - working


ACPI - use PowerManagement bundle from forum


ExpressCard slot - not tested, probably doesn't work


USB working, Firewire recoginzed but not tested

[edit] Gateway M275

Mac-OS-X-10.4.7-AMD.INtel-(jas)-ISO

Pentium M 1.7Ghz 1Mb L2

Intel 82XXX Chipset

Video VGA Compatible

512Mb RAM

60GB Harddrive

SWAP Intel 2200 WiFi By Broadcom Wifi b/g from Compaq Presario 2500 and Wifi Workking

Sigma Tel Audio AC97 Working

Ethernet Intel 100Mbps Working

USB Intel 2.0 Working

Agere Modem not Working

PCMCIA first not detected But when Install power Management Bundle start working

SD Card reader Not Working

Keyboard Working But if i touch a key when is booting not work

Touchpad Working but same as keyboard if touch when is booting not work

Fn Keys Working Volume and Wirelless On Off Brigth also working

And I will Like Help with this I was reading about Tablet PC and I never see somebody say working

I install Tablet Magic and other tablet Drivers from Wacom and my Tablet is Working but X axis work but Y axis is reconized as preasure and tablet magic say "SD Fallback SD Series Version 1.2" By serial Port 1

The Ink Appears at side of energy saver and Keyboard, I love to use the tablet as supose.


*****NEWS*****


********* Thanks this Page Tablet is Working and is great the driver of Khashoggi Works Great **********


Gateway M275 Tablet PC Fully Operational now Upgraded to 1.5Gb RAM and 160Gb Hardrive and Mac OS X just fly Great.


Tablet PC or Tablet MAC or i-Tablet or Better OSX86 Tablet PC


[edit] HP Compaq Business nc6000

Mac-OS-X-10.4.7-AMD.Intel-(JaS)-ISO-Repack

Pentium M 1.6ghz 1MB L2 Cache

ATi Mobility Radeon 9600 32Mb (QE/CI/GL) Working out of box

Intel2200 B/G Wi-Fi Intel Based not working

AC97 Sound WorkingOK

Broadcom NetXtreme Gigabit Ethernet WorkingOK with this hack: [17]

Integrated Modem not tesed

USB Ports WorkingOK

PCMCIA & SD Card Reader NotDetected

Keyboard, Trackpad and Synapticks Touchpad WorkingOK

Volume QuickKeys WorkingOK, but red LED not allways.

SpeedStep WorkingOK

ACPI (Battgery, Sleep, Screen OFF) not working

10.4.8 JaS pach working well whit these modification:[18]

[edit] Gateway CX210X

Mac-OS-X-10.4.7-AMD.Intel-(JaS)-ISO-Repack

Core 2 Duo T5500

Intel 950 1280x768

Intel PRO1000 ethernet

80GB SATA HDD on Intel SATA controller


Not working:

Wireless, Pen (Tablet), sound


I put in the Install disc, and installed, just like you would on a normal mac.

Battery-Works with PowerManagment patch



[edit] HP Compaq nc6120

Using JaS 10.4.7 - Installation was only possible with an external monitor attached (Later replaced by bridging points 9-13 on the DB15F with a small piece of metal paperclip).


Intel Pentium M @ 1.87Ghz - 1GB DDR2 533Mhz, Intel GMA900


Working

  • Broadcom BCM5705M_2 (with fix: [19])
  • USB
  • FireWire
  • CI - QE & QE2D
  • Optical Drive
  • Touchpad (enable tapping in System Preferences)
  • Keyboard incl Mute/Volume keys
  • Sound mostly (Mic, Speakers & headphones, can't mute speakers w/o muting headphones)
  • Battery & Power Management (with fix: [20])
  • Bluetooth


Not Working

  • Wireless Intel 2200BB (possible fix: [21], not tested yet)
  • Sleep Mode


[edit] HP Compaq nx6110

Using JaS 10.4.7 - Installation was only possible with an external monitor attached, and everyday booting is only possible with monitor plugged or paper clip inserted. 4 partitions (all primary !) on a single hard drive : 1st is NTFS for XP (set active), 2nd is is NTFS for Vista, 3rd is HFS+ for OSX, 4th is FAT32 for data. I'm tri-booting without a hitch using XFDISK (eXtended FDSIK, which can be found on UBCD - Ulimate Boot CD) and vista bootloader (2 bootloaders, one after the other!)

Intel Celeron M 360 @ 1.4Ghz - 1280 MB DDR, 120 GB Samsung HDD, Intel GMA900, MSI CB54G2 wireless PC Card

ACPI is quite ok : Fans behave normally, the laptop restarts and shuts down normally. Only sleeping mode is buggy. The system is surprisingly fast, even more than with XP.

-Working: Everything !

Out of the box : Graphic Card intel 915 w/ dual screen at desired resolutions (1024x768 internal and 1280x1024 external),everyday boot is possible only with inserted paperclip (join pin 6 with 12) or VGA dummy dongle,QE and CI activated, USB, Firewire, combo DVD/CDRW drive, Touchpad,Keyboard.

With drivers (ralink RT 2500) : MSI CB54G2 wireless PC Card.

With tweaking : Texas Instruments PC Card bridge TI PCI 7621 (built-in and needed to use any PC Card such as a wifi card!). Wasn't recognized until I followed this thread (http://forum.insanelymac.com/index.php?showtopic=29583) and built for myself a modified version of IOPCCardFamily.kext for the TI PCI 7621

-Not Working: Nothing!

[edit] HP Compaq nx6125

I used JaS 10.4.7. I have a Sempron 3100+ with 1.85Ghz. Mac OSX is running with 512Mb RAM. This machine also has BroadCOM4318 Wifi Chipset and ATI IXP SB400 Soundchip. You should install the Wireless drivers and AMD Patches. While some tools show me that I have SSE3 MacOSX only uses SSE2 (sad but not really a problem). The installation went fine. The wizard configured WLAN and it worked without a glitch. Sound doesnt work at all right after the Installation. Wifi stops working after the first reboot. What I did was:


1. Delete AppleAirport2.kext

2. Hack the sudo nano /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist

<string>en0</string> to: <string>en1</string>

and changed:

<integer>0</integer> to: <integer>1</integer>

rebooted and Airport was detected again.

3. check this page for the sound fix (page 27 especially) [22]


The system is pretty stable. Deleting the kextcache makes it faster (weird?).


[edit] HP Compaq nx7300

- Intel celeron M430 1.8 Ghz - 1Gb RAM - 120Gb Drive - Vista Basic pre-installed

Turned off sata native mode in BIOS ( push F10 while booting)

Used Vista disk manager to reduced vista's partition size.

Installed Jas 10.4.7 in the place left on the disk.

Everything seems to work except audio, but have to test firewire.

Replaced Power management by the bundled from keithpk : here

[edit] HP Pavilion dv1708nr

Jas 10.4.7 duel boot on native on partition

Specs: Intel celeron m 410 1.46ghz 512 ram 60gig hard drive

Jas os works with everything except for the sound, and wireless card at this time. you need to install patches on the disc like the intel ones depending on the hardware. Got it working with duel boot. i used acronis os selector and everything works fine.

It is very fast and the native res 1280x768 works just fine. using Darwine, it will run the windows programs on the windows partition.





[edit] HP Pavilion dv1520us

JaS 10.4.6 dual boot with Acronis

Intel Pentium M 735A 1.73GHz SSE2, 512mb DDR2, 80GB HD

Used JaS 10.4.6 with external monitor then made easy paperclip dongle. Now Have Full QE/CI support...and 1280x768 support with Intel GMA 900.

Intel/Pro Wireless 2200b/g Not working got a Belkin USB b/g F5D7050v2 with this Ralink 11g-RT2500 Driver.

Ethernet functions fine without hack.

Audio works, Volume Keys work and so does mute, DVD Burner works, USB Works, Firewire works.

CPU runs kinda hot so I installed cputhrottle and it works great and prevents fan from spinning so hard. Haven't tested modem, pcmcia or card reader.

No battery support, until I installed Powermanagement Bundle and now I at least get a battery percentage but it won't show time remaining. PCMCIA and Firewire works with this hack. Also updated to 10.4.7 with Jas' update and it works great!


[edit] HP Pavilion dv4291ea

Jas 10.4.7 dual boot XPSP2 with Acronis

Intel Pentium M 750 1.86 Ghz SSE2, 2GB DDR2, 100GB HDD, ATI Radeon Mobility X700 128MB (native 1280x800 widescreen)


Installed fine in dual boot configuration.

Working:

  • Graphics card at 1024x768
  • Bluetooth
  • Ethernet
  • Audio + Volume Keys + Mute Key
  • DVD Burner
  • USB

Not Working:

  • Graphics card at native resolution. Have been able to get 1280x800 widescreen, but unusable screen artifacts (with Callisto b006 and Koverg patch).
  • Intel Wireless 2200BG (Centrino Chipset)

Working After Fiddling:

  • Battery - installed a patch. OSX now recognises when I'm on battery and can correctly display percentage life remaining, but not time remaining. Powermanagement Bundle

Not Tried:

  • PCMCIA
  • IR Remote
  • VGA Output
  • Firewire
  • Lightscribe support on DVD drive (doubtful!)
  • 6-in-1 card reader (doubtful!)

[edit] HP Pavilion dv8323ea

Intel Core Duo 1.66 ghz, 1GB RAM, 120GB HD, Conexant HD Audio, Intel Pro 100/VE ethernet, Nvidia Geforce GO 7600 256MB


 Working:
 Nvidia Geforce Go 7600 (0x039810DE) 
 Conexant HD Audio (0x504714F1)
 Intel Pro 100/VE NIC (0x10928086)
 USB ports
 Firewire


 Not Working:
 Intel 3895ABG Wireless


 Not Tried/Unknown:
 Memory card reader
 PCMCIA
 Express Card Slot
 IR Remote
 S-Video output
 VGA output


Installed from JaS DVD Re-seed with the Intel options only (not AMD) and the combo 10.4.7 update as well as the decrypt update option.

Graphics are working (without acceleration) using MacVidia's 1.0.8 driver. (1440x900x32 resolution)

Sound working after updating the AppleAzaliaAudio.kext with the vendor id/dev ID. (ID: 0x504714F1) I also had to remove the HDA kext for this to work.

For the network card, I edited the IONetworkingFamily.kext/Contents/PlugIns/AppleIntel8225x.kext and added the dev id. (ID: 0x10928086)

Was able to use the USB ports after I followed the directions and downloaded the Generic EHCI USB kext from this thread.

Firewire is working.


[edit] HP dv9033cl

Intel Centrino Core 2 Duo Genuine Intel(R) CPU T5500, 1667 Mhz, 2 Core(s), 2 Logical Processor(s), 2Gb DDR2 667Mhz, Nvidia GeForce GO 7600 graphics,


Started with 10.4.5 patched install DVD, upgraded to 10.4.8. Had a few issues with keyboard/sound/touchpad but all were resolved with some forums digging. Video is CI/QE with Titan Kext.


Not working - WLAN, Audio input, Webcam


[edit] HP DV1660se

Intel Centrino Duo Genuine Intel(R) CPU T2300, 1667 Mhz, 2 Core(s), 2 Logical Processor(s), 1Gb DDR2 533Mhz, Intel 950GMA graphics, HL-DT-ST DVDRAM GSA-4084N ATA Device OSX 10.4.6/7 (JaS intall/update)

Install went flawless, Selected SSE3 intel during instillation, Installed in about 15 minutes. Had problems with a b0 error, fixed by reformatting the entire drive with disk utility.


- Working - Full Resolution, Touchpad, KeyBoard, USB, DVD drive. Very speedy - CPU Reccognised as 1.6 dual core. SATA 80gb HD


- Not Working - Pretty much everything that I need. Conexant HD Audio, LAN Intel Pro 1oo/ve, Intel Pro Wireless 3495abg, Tried the Belkin wireless alternative, no wi/fi. Orderd Dell alternative Wireless 1390 802.11g Mini PCI Express, no wi/fi. The Dell card was not compatable with HP - no boot. Switched back to VISTA.


[edit] HP dv4405nr

1.5 GHz Intel® Celeron® M Processor 370, 512MB 533MHz DDR System Memory, Intel Graphics Media Accelerator 900, 80Gb IDE HD. Instaled using JaS 10.4.6/7 install/update DVD.


- Working - Everything works! Wireless, LAN, Full Res(with paperclip dongle), TouchPad, USB, Audio, Volume Control quick keys, Im not sure what QE is so I cant tell you weather or not its working. Very good laptop for OSX86, $649.00.


- Not Working - The only thing that I had problems with was the display which was remadied by the paperclip dongle [23] - DVDRW support not tested, but I assume works, Card reader not tested.


[edit] HP Pavilion tx1000

Using Jas 10.4.7- installation not possible (could not find hard drive to install on) installation on usb hard drive possible but when booting gets an error saying that you must restart your computer also installation in VM ware possible no sound or usb drivers and double tapping suppored.

[edit] HP ZD7000

3.06 ghz Intel Pentium 4 Processor, 1.5 GB ram, NVidia GeForce FX 5700go 128MB, 60 Gb IDE HD. Installed using JaS 10.4.7 internal install DVD.


- Working - Pretty much everything. Wireless, LAN, Full Res (No QE/CI), Touchpad, USB, Audio, Volume Controls. Upgraded to a dual-layer DVD burner, shows up as a SuperDrive and works perfectly!


-Not Working - Due to the NVidia graphics, the display is only partially supported. The NVidia drivers that come w/ OSX don't work, but the MacVidia drivers get at least resolution change for now. Hopefully OpenGL will be added soon, and with that QE and CI


[edit] HP ZD8000

Specific model ZD8320EA. 3 Ghz Intel P4 CPU, 1Gb RAM, ATI Radeon X600 mobile 256mb dedicated vram, 100Gb IDE HD, Broadcom WLAN, Realtek 8139 NIC, 17-inch display(1440x900), remote control, dual-layer dvd-reader/writer, bluetooth, etc... Jas 10.4.6 install with update towards 10.4.7 with patches from JaS and SemjaZa.


- Working - Everything is working perfect and fast, even wifi out-of-the-box....Manual adjustment was required for graphics (Koverg & Callisto for high resolution and qe/ci) and after that it's running version 10.4.7 without any problem, fast and reliable. Just perfect!


- Not Working - Not all buttons of the infrared remote control function, but hey, that's no nightmare...


[edit] IBM Thinkpad T60p 2007-93J

T2600 2.17Ghz Core Duo / 1gb / 100gb 7200rpm / FireGL V5200 256mb / 15" FlexView IPS

BIOS: updated to 79ETC1WW (2.01)

details in Japanese is here [24]


Used 10.4.7 Jas Install DVD


Everything works great but wireless.


  • Video w/ QE/CI followed this tutorial [26]

and fixed mouse tearing with MouseLocator from here [27]

  • Power Management : [28]


NOTICE: QE/CI DID NOT WORK after updated to "JAS 10.4.8 SSE3 Update". So no sleep.


[edit] IBM R51 2883 8QU

IBM Thinkpad R51


Intel® Pentium® M Processor 1,6Ghz, 512MB, ATI Radeon 7500 32mb, Teac CD-RW DVD-ROM, Mac OS X 10.4.7 (JaS OS 10.4.7 Full install/Dual Boot w/XP; applied MPIP103_10.4.7.SMB.CIFS.APF.FIX.dmg and ALL is well.)


What works: LAN, Sound out via headphone jack; Both the touchpad and the 'nubbin' eraser pointer device; Everything is nice and fast, 1024x786 32bit


What doesn't work: WLAN, core image, Quartz Extreme;


[edit] IBM Thinkpad X31/T40

Used 10.4.7 Jas Install DVD


Installs successfully; ethernet working, sound working, video working(x31 m6 QE disable,T40 7500 QE enable)


[edit] IBM Thinkpad R40e 2684-AF1

Used 10.4.7 Jas Install DVD


Installs successfully; not working: built-in ethernet, sound, PCMCIA (IOPCCardBridge: Start Failed!)



[edit] IBM Thinkpad T30 2367-86U, 2366-81U, 2366-43U

Used Jas Install 10.4.7

Installed in vmware first, with patches. Native install gave me errors. Took forever. Converted the .vmdk into a raw disk .img with qemu-img. Used diskpart to create primary partition id=af and dd the img to that partition. Took Forever. Used Chain0 at first but Darwin loads Windows. iTunes works, Safari works, Ethernet works, Sound works, USB works, resolution looks good to me.

Had to add Timeout in com.apple.Boot.plist

Fixed wireless by getting the IO80211Family.kext from 10.4.5. Changed to en1. Atheros AR5212 with Netgear WGU624.

Fixed battery meter. [29]

Screensaver still crashes.


[edit] IBM ThinkPad T42 2373

I installed the Mac OSX 10.4.7 with the JAS Install DVD. When installing i chose not to install the GMA900 Patch. After installation the sound worked great. No problem for that. The video mode is limited by the installation to 1024x768 pixels. I'm working on it and will edit this entry when something changes. What also worked: build-in ethernet, bluetooth, applying new usb devices like a wirless logitech mouse, etc. Everything worked so far, except Wireless and higher Video Resolution. But I'm working on. I could not test the PCMCIA Slot.


EDIT: I solved the problem with the ATI Radeon9600 Graphics card. I'll write a little tutorial for installing OSx x86 10.4.7 on the IBM Thinkpad T42 soon and make the link available here.


Since now the tutorial is only available in german language. I'll translate it to english in time.

Here you are:


001.-.Die.Installation.von.Mac.OS.x86.10.4.7.doc


002.-.Callisto.Treiber.installieren.doc


003.-.Veraendern.der.Aufloesung.doc


FAQ.doc

[edit] IBM Thinkpad X60s 1702-3JU

IBM Thinkpad X60s


Here's how to get sound, video, wireless and sleep working on X60s under 10.4.7/10.4.8(Sleep only works under 10.4.8).


Video:


You must install the GMA900 patch from the Jas 10.4.7 dvd.


WIRELESS:


      • The intel card will NOT work under OSX***


You must purchase and install the "ThinkPad 11a/b/g Wireless LAN

Mini-PCI Express Adapter" (available currently from amazon.com/lenovo.com part

  1. 40Y7026)


Editing plist: cd /System/Library/Extensions


sudo nano

System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AirPortAtheros5424.kext/Contents/Info.plist


Add: <string>pci168c,1014</string>


Setting Permissions: sudo chown -R root:wheel /System/Library/Extensions


kextcache -k /System/Library/Extensions


SOUND:


1. Delete AppleHDA.kext:


  • In Terminal, type: sudo rm -rf /System/Library/Extensions/AppleHDA.kext
  • sudo rm -rf /System/Library/Extensions.mkext
  • sudo rm -rf /System/Library/Extensions.kext


2) Edit AppleAzaliaAudio.kext:


  • In Terminal, type: sudo pico /System/Library/Extensions/AppleAzaliaAudio.kext/Contents/Info.plist
  • Search for (use hotkey= ctrl + w):

<key>IOHDAudioCodecVendorID</key>

  • change the string to:

<string>0x10ec0882</string>

  • Exit pico
  • sudo pico /System/Library/Extensions/AppleAzaliaAudio.kext/Contents/PlugIns/AppleAzaliaController.kext/Contents/Info.plist
  • Search for (use hotkey= ctrl + w):

<key>IOPCIPrimaryMatch</key>

  • change the string to:

<string>0x27d88086</string>

  • Exit pico


3) Clean up the system:


  • In Terminal, type: sudo kextload /System/Library/Extensions/AppleAzaliaAudio.kext
  • kextcache -k /System/Library/Extensions/


4) Then, reboot and enjoy sound out of two channels.


Power Management:

Install the PowerManagement patch from this thread: [30]


Also, you must update to 10.4.8 if you want sleep/suspend to work.


[edit] Medion MD 95965 / MSI S260W

MacOS X 10.4.7 JaS install DVD


  1. CPU --> Pentium M730 (1.6GHz, SSE2)
  1. RAM --> 2x 256MB DDR 2700
  1. HDD --> 60GB Samsung
  1. GFX --> Intel GMA915
  1. CDR --> TSSTCORP SN-M242C


Everyhting works fine (no sound issues or something like that), except the IntelPro Wireless 2200BG, but that's ok, for that i used a USB WLan Stick from "Hama" it got a "Ralink-Chipset" so i can use the 3rd Drivers. I also got a Bluetooth-Stick from Sitecom wich works "out-of-the-box". With the PowermanagmentFix i can also see the Charging Status. For the Intel GMA "Bluescreen" error i just connect Pin6 with Pin12 on my VGA-Out port with a metal paperclip ;p Simple and it works, too. At this Point i want to thank everybody that support the OSX86 Project you guys are awesome. Thanks for everything!


[edit] Samsung P28 NP28PRKV01/SEK

Mac OSX 10.4.7 Jas Install DVD Only this release installed successfully.All previous has same error "Still waiting for root device"

  1. CPU Pentium Mobile 725(Dothan) 1.6Ghz (SSE2)
  1. Chipset ATI RS300
  1. Memory 768Mb (PC2700) DDR Samsung256mb+Hynix512mb
  1. HDD SAMSUNG HM100JC IDE 100Gb
  1. CDRW/DVD TSSTCORP_CDW/DVD_TS-L462C - Sometimes disappear from system profiler.One boot-everything OK,next boot- "You have not diskburning device presenting or may be it disconected". Have no idea how to fix. P.S.Found problem resolve here InsanelyMac Forum
  1. Video ATI Mobility Radeon 9700 64Mb (M10 NP) (RV350)VESA2.0 - Fully working,QE/CI,OpenGL, 1024x768x60Hz -default resolution & refresh rate for this notebook.Working w/out any patches.
  1. Sound Sound Max AC97 on ATI chipset (built-in) - Fully working (IN and OUT) using fixed for ATI chipset AppleAC97.kext InsanelyMac Forum
  1. Net Broadcom 440x 10/100 Integrated Controler - Working w/out any patches + Samsung SWL2700M 11b/g miniPCI WLAN Adapter(Atheros 5212chip) Working with IO80211Family.kext from Mac OSX 10.4.5
  1. Other USB 2.0 - working at full speed (external HDD,flash card). Keyboard & touchpad - working.USB-Radio Mouse A4Tech - working. All USB devices -w/out any patches. 56k V.92 Fax/Modem - not working(not recognized by installer). Power Management - not working,need to fix.

[edit] Samsung X10

Mac OSX 10.4.7 Jas Install DVD

  1. CPU Pentium Mobile 725(Dothan) 1.4Ghz (SSE2)
  1. Chipset dont know
  1. Memory 512Mb DDR SoDIMM
  1. HDD TOSHIBA MK4018GAS
  1. CDRW/DVD Samsung CD-RW/DVD-ROM SU-408B
  1. Video nVidia, no KEXT loaded, no QE/CI. DualScreen (copy) is working, but only in 1024x768.
  1. Sound Sound Max AC97 (built-in) works but no information about audio at the System Profiler.
  1. Net 10/100 Integrated Controler - Working w/out any patches + Atheros miniPCI WLAN Adapter Working with IO80211Family.kext from Mac OSX 10.4.5
  1. Other USB 2.0 - working at full speed (external HDD,flash card). Keyboard & touchpad - working.USB-Radio Mouse A4Tech - working. All USB devices -w/out any patches. Power Management - not working,need to fix. FireWire is working at 400MBit/s.

I still have no DVD Support, the video and audio is not running well. DIVX is running.

[edit] Samsung X60 (Studentbook)

CPU: Genuine Intel(R) DUO CPU T2300 @ 1.66GHz WORKING

Chipset: Intel: i945 WORKING

RAM: 2.048 MB (2x1024MB)PC2-4200 (533 MHz) DDR SODIMM WORKING

Display: 15,4" WXGA TFT WSXGA+ (1.680 x 1.050)512 MB HyperMemory ATI Mobility Radeon X1600 WORKING ONLY 1024x768

Hard Drive: 100 GB SATA-Festplatte, S.M.A.R.T. II WORKING(no Smart Support)

DVD-RW: DVD-Super-Multi8xDVD 2,4 4xDVD+/-RW 5xDVD-RAM 8xDVD-ROM WORKING

LAN: Netzwerk 10/100/1000 Ethernet UTP WORKING

Modem: 56 Kbps/V.92 onboard NOT WORKING

W-LAN: Intel® PRO/Wireless Network Connection 802.11a/b/g (3945ABG)NOT WORKING

Bluetooth: Broadcom 2045 Bluetooth 2.0 WORKING

Audio: Sound MAX HD Audio Codec, AD1986A NOT WORKING

TouchPad: WORKING

USB: 3 x USB 2.0 WORKING

SPDIF: NOT TESTED

Card Reader:SD, XD, MMC, NOT WORKING

PCMCIA: Ricoh R5C841 NOT TESTED

NOTE:Does not suspend when told to or when notebook is closed. When told to sleep the mouse cursor disapears and hard drive shuts down, but display is still bright. It does not crash though.


[edit] Sony Vaio VGN FS-115Z

  1. Install DVD: Mac OSX 10.4.7 Jas Install DVD
  1. Intel Pentium M 740 1.73 GHz
  1. 1GB (1024MB) DDR SDRAM
  1. 100GB Hard Disk
  1. DVD+/-RW Drive (works with iTunes, Toast 7)
  1. 15,4" X-black LCD 1280*800
  1. NVidia GeForce Go 6200 (just working in 1024*768, solution below)
  1. Intel Pro Wireless 2200BG 802.11b/g (not working)
  1. Ethernet 10BASE-T/100BASE-TX (is working pretty good)
  1. Realtek ALC260 (is working very well without installing any driver!)


  1. After installing JaS 10.4.8 Combo Update:


  1. Processor is not recognized
  1. Realtek ALC260 is not recognized (means no sound)
  1. NVidia GeForce Go 6200 (solution: install Macvidia 1.08, go to system panel, display and change resolution into 1280*800)


[edit] Sony Vaio GRT996ZP - 5121/PCG-GRT996ZP

  1. Intel Pentium 4 3.2GHz Processor
  1. 1GB (1024MB) DDR SDRAM
  1. 80GB Hard Disk
  1. DVD+/-RW Drive (Work with Toast 7 but a little slow)
  1. 16.1" Ultra-Bright TFT 1600x1200 (Working at 1600x1200 with Macvidia)
  1. Nvidia GeForce FX Go5600 64MB Graphics (Macvidia loaded)
  1. Atheros AR5212 802.11b/g Wireless LAN (Working as Airport) [31]
  1. SiS 900 10/100 LAN (Not working)
  1. SiS 7012 sound card (Working but doesn't appear in system preferences) [32]
  1. 56k V.92 Fax / Modem (Not test and don't want to)


[edit] Sony Vaio VGN-N130G

Works using DVD install. I had to install Jas' GMA 900 patch to make my GMA 950 work perfectly with qe and ci. Also applied Jas' sse 3 Intel patch. In order to get the high definition audio to work, I edited the AppleAzalia.kext to work with the ALC262 Realtek High Definition Audio sound card (look up your dev and vendor id). I needed to also remove the AppleHDA.kext for the card to be recognized. The IOnetwork.kext needed to be edited to work with the ethernet card. The wireless is not working yet. Also applied the power management kext to make the battery show up. Works really well. Nice and smooth.


Edit - Whoever posted this, could you post a how-to in the forum for the ALC262? Thx.



How to get HD audio working - sound for ya!!!


1) Backup AppleHDA.kext:

In Terminal, type:

CODE

cd /System/Library/Extensions

sudo mkdir audio_backup

sudo mv AppleHDA.kext audio_backup/


2) Edit AppleAzaliaAudio.kext:

In Terminal, type:

CODE

cd /System/Library/Extensions

sudo pico AppleAzaliaAudio.kext/Contents/Info.plist


Search for IOHDAudioCodecVendorID (press Ctrl + W)


Find:

<key>IOHDAudioCodecVendorID</key>

<string>0x10ec0880</string>

Change <string>0x10ec0880</string> -- to -- <string>0x10ec0262</string>


Exit pico: press Ctrl + O to save and then Ctrl + X to exit

In Terminal, type:

CODE

sudo pico AppleAzaliaAudio.kext/Contents/PlugIns/AppleAzaliaController.kext/Contents/Info.plist


Search for IOPCIPrimaryMatch (press Ctrl + W)


Find:

<key>IOPCIPrimaryMatch</key>

<string>0xNNNN8086</string> (where NNNN are any 4 characters)

Change <string>0xNNNN8086</string> -- to -- <string>0x27d88086</string>

(note: for ALC882, the string is probably correct without any edit)


Exit pico: press Ctrl + O to save and then Ctrl + X to exit


3) Clean up the system:

In Terminal, type:

CODE

cd /System/Library/Extensions

sudo diskutil repairpermissions /

sudo chown -R root:wheel AppleAzaliaAudio.kext

sudo chmod -R 755 AppleAzaliaAudio.kext

cd /System/Library

sudo rm -rf Extensions.mkext Extensions.kextcache


I install version 10.4.6, apply patch 900, Remove GM950 for error popup when log in. Video work perfect with qe and ci with resolution 1280x800. Sound work, no input though. Ethernet is working using editing AppleYukon.kext(put a post on here, show you how). Running with Duo Core, USB work perfect. Firewire work. Power management work also.


[edit] Toshiba Qosmio G25-AV513

Specs Here [33]

^copyright Toshiba

Dual SATA 60gb hard drives First installed WinXP to first drive, then WITH the JaS DVD disk manager, partitioned the second as ~10GB for osx and ~50GB FAT32. (now works like a charm. no safe mode, nothing.)

Installed with JaS 10.4.6 DVD ISO, upgraded to 10.4.7 in same install session (JaS patch)

Applied SSE2 patch (Processor is sse2, not sse3) from JaS DVD

Applied MacVidia Drivers Beta 2 for GeForce Go 6600 (auto installer)

Graphics work at native 1440x900 resolution. bells and whistles of the card itself, however, are not present. 3d animations on the OS are somewhat laggy and subpar. a bit annoying, nothing serious at all. hopefully macvidia will come out with the support soon.


Sound works: AC97 codec chip. after JaS install, played around with sound and speaker settings in the OS itself. Also, try the Aggregate Drivers tab in mac os. after monkeying with that, my sound worked randomly. also, volume knob controls sound and i get the sound symbol in the bottom center of my screen with sound to indicate +/- sound levels.


Ethernet card is recognized, though I haven't tried it yet.

Wireless card (intel pro/wireless 2915) does NOT work and to date, i have not found any drivers. still searching.

bluetooth not recognized (havent tried to fix this). speakers themselves not recognized (although they work)

no battery monitor, although i hear there is a fix...not worried

DVD drive is recognized fully in system profile-although haven't tried writing yet. OS reads the jas disc i have in the drive currently.

  • the latest version of itunes (7.2) gave me a 'not enough memory' error. reinstalled. to no avail. finally, version 4.7 worked, however its ancient. worth it, though.


[edit] Toshiba equium L30

Intel Pentium Celeron M processor 1.47ghz, 512MB, ATI Radeon x200M Shared memory, ATI SATA, Mac OS-X 10.4.8.


What works: Touchpad, USB, Keyboard, CD/DVD burner, 1024z768 32bit, CPU (detected as Core duo).


What doesn't work: Lan, WiFi, Audio, battery status, SATA (using usbdisk), QE/CI.

Some work might bring lan, wifi, audio, SATA and battery status but there seams to be no way to make QE/CI work on it.


[edit] Toshiba Satellite A75-S2112

(Intel Moible Pentium 4 3.06ghz (SSE2), 512mb RAM, ATI Mobility Radeon 9000 IGP)


My OSX is on a small, 8gb partition on the end of my drive. I used PartitionMagic to resize my Windows partition, and create an unformatted (really doesn't matter what type) partition in the 8gb at the end of the drive. I installed Smart Boot Manager to the MBR, for dualbooting as well as to preserve XP's MBR. I then booted the OSX cd, and erased that unformatted partition, formating it with HFS+. I installed OSX to it, rebooted, and Smart Boot Manager detected it. I had to set both it and my windows XP to auto-active (look in the menus).


My OS X setup process was as follows:

  1. Installed JaS 10.4.7, booted fine right off.
  1. Used Callisto 006 drivers for the graphics. No QE, CI, or OpenGL (or even AGP), but last time I tried to make that work I had to reinstall everything.
  1. Used Zappadoc's ATA driver for the initially-nonworking DVD drive (had to delete old AppleOnboardPCATA).
  1. Used [34] for network; replaced old IONetworkingFamily. [35] might help for the wireless also.
  1. Still have yet to get the sound to work. Updates to come.


[edit] Toshiba Satellite A85-S107

Intel Pentium Celeron M processor 1.4ghz, 512MB, ATI 9100 IGP, TSSTcorpCDW/DVD, Mac OS-X 10.4.6 JaS OS 10.4.7 Full install/Dual Boot w/XP)


What works: LAN, Touchpad, USB, Keyboard, CD/DVD drive, 1024z768 32bit (WiFi works with replaced KEXT's).


What doesn't work: WiFi (out of the box), Audio.


WiFi will work by replacing two kext files, and audio may or may not work with edited kexts. Everything else works.


[edit] Toshiba Satellite A100-121

Features:

Model sold (at least) in Italy; CPU: Intel Core 2 T5200 1.6 GHz; Memory: 1GB (2 x 512MB DDR2 533MHz); Graphic Adapter: Intel 945GM; DVD-RAM: Matshita (Panasonic) UJ-841


Installation method:

Jas 10.4.7 installed from Windows XP using VmWare and following this guide [36] (except for the following VmWare options: guest OS = winNT; number of processors = two); during the installation I selected the following three patches: Intel 10.4.7 Combo.Update, Intel SSE3 and GMA support; I did not install Intel SSE2 support; I do not remember if I selected any other patch


Boot method: Acronis OS selector


Working:

  • CPU correctly recognized as T5200; number of CPUs correctly recognized as 2
  • Graphics/Display (full resolution 1280x800)
  • Touchpad, Keyboard
  • USB (tested with a Lacie and a Brother printer)
  • DVD drive (both reading and burning)


Working with adjustments:

  • Audio out Realtek: fixed following this guide [37]
  • Ethernet Intel Pro/100 VE: fixed by adding device id and vendor id to the AppleIntel8255x.kext following these instructions [38]
  • Power Management: fixed by installing the PowerManagement.bundle with ACPI support following these instructions [39]

Not working/not tested:

  • Audio In not working
  • Wireless Intel Pro 3945ABG not working
  • PCMCIA not tested


Installation prehistory:

before successfully installing 10.4.7, I attempted to install the Jas10.4.8.iso both via hardware and vmware without succeeding.

[edit] Toshiba Satellite A100-VA9

Features:

Model sold in Canada; CPU: Intel Core 2 T5500 1.66 GHz; Memory: 2GB (2 x 1024MB DDR2 667MHz); Hard Drive: 200GB SATA; Graphic Adapter: Nvidia Go 7600; DVD-RAM: Matshita (Panasonic) UJ-850S


Installation method:

Jas 10.4.7 (Mac-OS-X-10.4.7-AMD.Intel-(JaS)-ISO-Repack)

Installed native from DVD. Partitioned the drive via installation DVD 1 HFS (Journeled) partition for MacOSX & 2 FAT32(Dos) Partitions (1 for XP & 1 For storage). Installed the Intel SSE3, Intel 10.4.7 Combo Update and did not install SSE2 support I also selected the VIA chipset pack I believe. Ghosted a copy

Boot method: Darwin Boot Loader


Working:

  • CPU correctly recognized as T5500; number of CPUs correctly recognized as 2
  • Graphics/Display (full resolution 1280x800)
  • Touchpad, Keyboard
  • USB (tested with a few different USB Key Drives)
  • DVD drive (both reading and burning)


Working with adjustments:

  • Audio out Realtek: fixed following this guide [40]
  • Ethernet Intel Pro/100 VE: fixed by adding device id and vendor id to the AppleIntel8255x.kext following these instructions [41]
  • Power management works like a charm: fixed by installing the PowerManagement.bundle with ACPI support following these instructions [42]

Not working/not tested:

  • Audio In not working
  • Wireless Intel Pro 3945ABG not working
  • PCMCIA not tested

Installation prehistory:

before successfully installing 10.4.7, I attempted to install the Jas10.4.8.iso both via hardware and vmware without succeeding.

[edit] Toshiba Satellite M115-S3094

Intel Core Duo Processor T2050 1.6GHz

2x1GB OCZ PC2-4200 DDR2-533 (from 512MB RAM)

80GB 5400RPM HDD

14.1-inch WXGA TFT Display

Mobile Intel 945GM Express

8X DVD+/-RW Drive

Intel PRO/wireless 3945 a/b/g

Realtek RTL8139/810x 10/100 Ethernet

Realtek ALC862 Audio


With JaS 10.4.7:


Working out of the box:

  • 945GM at 1280x800
  • Keyboard, touchpad, DVD-RW


With patching:

  • Realtek ALC862 Audio (VEN: 10EC, DEV: 0862, Audio)

if that does not work for you try ALC882)

Self installer for ALC882 cards worked like a charm for me ;-)

(Could someone please edit to include more info and tutorial about these patches)


Not Working:

  • Intel PRO/wireless 3945 a/b/g (Mini PCI Express) Hopefully soon this is supported under linux distros.
  • ENE Technology Inc. CB-712BF Cardbus/PCMCIA (VEN: 1524, DEV: 1412)
  • Integrated ENE Technology memory card reader

(Could someone find patches for these and post them)


Working wireless with Dell 1390 Mini PCI Express card (Toshiba didn't have any BIOS lockout!)

Dell MiniPCI Express card won't work with all M100 models - beware. If you have an M series Dual Core notebook with Dell Mini PCI working, and if you have a BIOS Flash file. Please post here the link or the method


[edit] Toshiba Satellite U205-S5002

Intel Pentium Core Duo T2300E, 1GB DDR2, Intel GMA 950, MATSHITA DVD-RAM UJ-842S, Mac OSX 10.4.7 JaS

OSX 10.4.7 Full Install/Triple Boot/XP, Vista, OSX


What works:

LAN Intel Pro/100 VE(with kext mod)

Touchpad


Keyboard

CD/DVD Drive

1280x1024x32x60

QE/CI

SoundMax AD1981HD (with kext mod)

Sound Wheel (External)

USB

FireWire


What doesn't work:

WiFi (out of the box / no available fixes) -- Intel Pro Wireless 3945abg

Sound (IN)

Sound Jacks (EXTERNAL)


Special note that bios settings must be modified as follows:

   * Dynamic CPU Frequency Mode = Always Low
   * Device Config. = All Devices


[edit] JKoz's Custom Build

Used HotISO 10.4.6 for install

Triple boots to Windows XP Pro, Windows Vista RC1, and Mac OS X 10.4.6


What works:

ASUS P5AD2-E Deluxe Motherboard

3.2 GHz Pentium 4 with HT

250 GB Seagate 7200RPM HDD

Samsung 16x +/- DL DVD-RW

MSI Radeon x800 256mb PCI-Express x16

1152x864x16x60

Onboard ethernet

USB Mouse and Keyboard

Firewire, USB


What doesn't work:

Widescreen resolution; desired 1400x900

No x800 support

Onboard sound not recognized, HD C-Media

[edit] Gateway MX7118

Mobile AMD 64 Athlon 3400+ (2.2ghz), 1.5GB Memory, ATI Xpress 200M

I installed using JaS 10.4.7 Patched DVD Installed a little slow, but it moved along ok. Used AMD patches

  • IMPORTANT* In order for me to get my PS/2 Touchpad to work I had to disable USB Legacy Support in my BIOS!

So Far:

Wireless: Works great, although you have to enter your network in manually, it won't show up in the scan (Broadcom BCM4318)

Touchpad (shows up as Synaptics 5.9) not sure what the exact hardware is called but I know its synaptics

Keyboard

AC97 Audio

CD/DVD Drive

USB/Firewire

What doesn't work:

Widescreen Resolution (1200x1600)

Besides that everything runs pretty smooth :) . . . . . . . .


This page was last modified on 18 August 2013, at 11:38.
This page has been accessed 453,634 times.
Powered by MediaWiki © 2015 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   PHP hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers