HCL 10.4.8

From OSx86
Jump to: navigation, search
Mac OS X 10.4.8
Hardware Compatibility

This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for 10.4.8 builds only.

For how to edit the Wiki, please see this thread. Thank you!

You're looking for an Installation guide? see here

Contents

[edit] Motherboard

A comprehensive list of possible Intel chipsets

PLEASE INCLUDE THE SOUTH BRIDGE TOO Also please note which CPU you are using

[edit] AMD

[edit] Abit

Hardware Name (socket type) Chipset Notes Fully working without patching
KN9 Ultra Nvidia nForce MCP55-Ultra (nForce 570 Ultra) Works: almost everything.
  • USB2 - works without patching
  • FireWire - works without patching
  • SATA - works (only read, write in the works) with AppleNForceSATA patch (Not for me! Bertdd)
  • PATA - works (For DMA and disks larger than 128GB follow these Instructions)
  • audio - ALC883 - works with 2.0 audio and 5.1 audio, with patch ALC883Audio, digital out not tested, but should work
  • nForce 570 Gigabit LAN does not work
  • suspend, poweroff - works
JaS 10.4.8 DVD for AMD SSE3
AN52 NVIDIA nForce 520 single chip Works: almost everything.
  • USB2 - works without patching
  • SATA - SATA Harddisk does not work
  • PATA - works (For DMA and disks larger than 128GB follow these Instructions)
  • audio - ALC883 - works with 2.0 audio and 5.1 audio, with patch ALC883Audio, digital out not tested, but should work
  • nForce 520 Gigabit LAN does not work
JaS 10.4.8 DVD for AMD SSE3
AX8 VIA K8T890 (South Bridge VT8237)
  • USB - fails except keyboard/mouse (fix on the way?).
  • Onboard Ethernet (Marvell) - Does not work.
  • Onboard AC97 sound - (Works, some config needed).
  • SATA - Works
  • PATA - Works
No
AV8 VIA K8T800 Works with JaS; no onboard ethernet (Marvell), no onboard AC97 sound, USB intermittently fails except keyboard/mouse (reboot to fix) Yes
NF-M2 nView Nvidia nForce 4300
  • Onboard Ethernet (Realtek RTL8111B) - Does not work
  • Onboard Sound (Realtek ALC883) - Works
  • Onboard GeForce 6150 - Does not work (only VESA, not Natit or Titan)
  • SATA - Not tested
  • PATA - Works
Yes, Uphuck 1.2 and 1.3 with sound driver
NF8-V2 (S 754) Nvidia nForce3 250

No patches

  • SATA works
  • PATA works
  • Sound 2 channels work (5 ch buggy), input n/tested
  • LAN works
  • All USB work

Sleep doesn't work

Yes, JaS 10.4.8 (10.4.9 ok)

[edit] BIOSTAR

Hardware Name (socket type) Chipset Notes Fully working without patching
K8M800-M7A VIA K8M800 (South Bridge VT8237R
  • USB 2.0 - Works
  • Onboard Realtek ALC655 6-Channel AC97 sound - Works
  • Onboard Ethernet (Realtek RTL8201BL) - Does not work.
  • SATA - Untested
  • PATA - Works
JaS 10.4.8 for Intel & AMD SSE3 PPF1 & PPF2

[edit] DFI

Hardware Name (socket type) Chipset Notes Fully working without patching
LANParty UT NF4 Ultra-D NForce 4 Ultra Both IDE & SATA working, ALC850 on-board audio works, Both NICs work (Marvell & Nvidia), USB has to be plugged in after its booted. JaS 10.4.8 AMD INTEL SSE2 SSE3 beta 2 DVD w/ semthex 8.8.1 and extra drivers (Azalia, NATIT, etc.)
SLI-DR Expert NForce 4 Ultra IDE and SATA Working, Audio Unknown, Marvell LAN Works, Nvidia Ethernet works, USB Devices must be unplugged then plugged back in at boot (or install USB 2.0 driver from the Forums). Jas install DVD AMD 10.4.8 SSE 3 TEST 1
Infnity RS482 ATI SB450 IDE Seems to have problems during installation proccess after finishing a install. Unknown working status as follows... Realtek ALC850, Northbridge ATI Radeon Xpress 200 and SATA does not work. NIC onboard Realtek RTL8110SB Gigabit onboard works. Nope

[edit] Digitron

Hardware Name (socket type) Chipset Notes Fully working without patching
DG-760GX SiS 760GX/SiS 964 Sound and vdeo not tested (using vdeo Geforce2 Mx400). Ethernet SiS 900 doesn't work. IDE works perfectly. USB 2.0 also perfectly. Sata not tested. JaS 10.4.8 AMD.Intel SSE2.SSE3 defiant diskutil biker880 ICH7-R patch integrated.iso

[edit] ECS

Hardware Name (socket type) Chipset Notes Fully working without patching
760GX-M (V1.1) (Socket 754) SiS 760GX/964 Base devices work (USB, Firewire, PS/2). Must disable legacy USB devices in BIOS for PS/2 mouse and keyboard to work.
  • Sound: Requires SiS 7012 Driver for correct line out/mic in.
  • Ethernet: Requires Realtek 8139 Driver.
  • ATA: Requires SiS Driver for all ATA channels to be active. All drives will appear as SATA devices, including DVD+-RW.
  • SATA: Works when set to IDE mode in BIOS and ID 0x01801039 added to Info.plist in above driver in "IOPCIPrimaryMatch" under "VIA SATA Controller".
  • Video: Basic VESA 3.0 framebuffer. AGP enabled with AGPGart.kext version extracted from this package. On board graphics are quite fast, but no QE/CI or OpenGL. Note: If AGPGart.kext is not modified QE AND CI are supported with nitan_uni.install.
  • Sleep: Does not wake from sleep.
Tubgirl: OSX_1048_AMD.iso (requires patches listed in Notes)
NFORCE4M-A (v3.0) (Socket AM2) nForce4-4X (nForce4) PS2 devices not tested - may need to disable legacy USB in BIOS.
  • IDE out-of-box supported
  • USB out-of-box supported
  • Onboard Ethernet Realtek RTL8201CL 10/100 Mbps out-of-box supported
  • CLICK HERE - SATA not tested
  • Audio Realtek AC'97 ALC655 6-Channel audio w/ MIC In/Out w/at least 2-Channel out-of-box supported
  • Serial Port out-of-box detected in System Preferences under Networking
Mac OS X 10 4 8 - JaS AMD Intel SSE2 SSE3 incl PPF1 <-(Semthex 8.8.1)
NFORCE4-A939 (V1.0) (Socket 939) nForce4-single chip PS2 devices not tested - may need to disable legacy USB in BIOS.
  • IDE out-of-box supported
  • USB out-of-box supported
  • Onboard Ethernet Marvell 88E1111 Giga LAN PHY out-of-box supported
  • SATA not working
  • Realtek ALC655 6-Channel audio CODEC audio w/at least 2-Channel out-of-box supported
  • Runs perfect w/ PNY 7300GT PCI-e, full CI/QE
Almost; SATA not working, but IDE fine. Jas 10.4.8. AMD Intel SSE2 SSE3 incl PPF1 <-(Semthex 8.8.1)

[edit] eVGA

Hardware Name (socket type) Chipset Notes Fully working without patching
eVGA 123-K8-NF47-AX

(939)

nForce 4 Ultra SLI You have to disable USB Keyboard/Mouse in the BIOS for PS/2 and USB keyboard/mice to work.
  • nForce audio out working, in not tested yet.
  • ATA Works out of the box
  • SATA works with nForce4 patch.
  • USB, Firewire, PS/2 work.Marvel Gigabit LAN works out of the box, didn't even bother with nforce LAN..never used it
Jas 10.4.8 AMD.Intel.SSE2.SSE3

[edit] Foxconn

Hardware Name (socket type) Chipset Notes Fully working without patching
6100K8MA - RS / Acer FC51GM nForce 410 / 430 Audio working 2.0 mode, 5.1 is bugged. IDE works fine, SATA can be activated but will cause crash. onboard GeForce 6100 untested <<please test!>>. Onboard Ethernet does not work as described in note, using 10.4.8 AMD SSE3 test1 DVD
6150K8MD nForce 410 / 430 Audio Works with an azalia installer of the forums, onboard graphics untested, onboard ethernet works, onboard USB works. IDE works, sata untested. Using JaS 10.4.8 AMD.Intel.SSE2.SSE3.dvd
NF4SK8AA nForce 4 Ultra Sli Everything works, NForce SATA works, SiI SATA not tested Using Tubgirl 10.4.8
760GXK8MC SIS 760GX Audio AC97 ( ADI AD1888 ) Does not work , Built in Ethernet (SIS 900 ) Does not work. Onboard Graphics work , but not well. USB works fine. IDE works. Using JaS 10.4.8 AMD.Intel.SSE2.SSE3.dvd

[edit] Gigabyte

Hardware Name (socket type) Chipset Notes Fully working without patching
GA - M57SLI-S4 NForce 570 SLI(AM2) onboard audio(only tested standard, none of the surround stuff), lan, usb and firewire all work. SATA works. Read this to fix the problem with IDE drives larger than 128GB [1] Yes, Tubgirl 10.4.10 AMD SSE3 (Be patient, gray screen stays up for 5-10mins before install loads). Select the Nforce4 drivers during install
GA - M55SLI - S4 NForce 4 (AM2) audio works (no s/pdif tho), onboard network does not work(although I havn't tried to add any drivers), sata untested, usb working No, JaS Update 10.4.8 AMD SSE3 only
GA-M56S-S3 NForce 560 (AM2) Everything except Ethernet (Realtek 8211BL) works without patching, tried every driver I could find on the Internet, net card recognized, but can't get IP from DHCP. No, Kalyway 10.5.2 combo
GA - K8NXP - 9 nForce4 Ultra IDE, SATA nForce4, USB, Firewire, Audio stereo, W-LAN PCI card work. Reboot doesn't work. Not tested: SATA Silicon 10.4.8 AMD DVD SSE3 (Semthex kernel)
GA- K8N-SLI nForce4 SLI IDE, Sata Nforce4, USB, Audio stereo mic line in, reboot work, Sata work, lan work,No mark the option istall a nvidia natit driver. After installing restart and choice a safe mode e install nvidianv40.pkg. JaS 10.4.8 AMD Intel SSE2.SSE3
GA-K8NF-9 nForce4 works OOTB: IDE,nForce4 LAN,Realtek AC97 audio,USB,reboot works

works with patch: nForce4 SATA(it can even install on it with medevil patch,search forum) Not Tested: Firewire(but recognize in system)

Jas 10.4.8 AMD Intel SSE2.SSE3
GA-K8N51GMF nForce 410 works OOTB: IDE,Realtek AC97 audio,USB: nForce4 410 SATA(10.4.8 SATA not working, in Tubgirl AMD Final 10.4.9 SATA READABLE writing UNTESTED), onboard nforce lan not working, onboard video nvidia 6100 runs in VESA mode only,reboot shuts down but computer and fans still running. Not Tested: Firewire(but recognized in system profiler) Tubgirl AMD 10.4.8
GA-K8NS Nforce 3 Everything works,About this mac not working for me but who knows maybe u can figure that out.no sound/network with 10.4.6/10.4.7 all ok with 4.8 release...Not working at all Jas 10.4.8 AMD.Intel.SSE2.SSE3
GA-K8N Pro (Socket 754) Nforce 3 Default installation has video working (NO QE/CI but 1024x768), onboard Audio AC'97 (Realtek ALC658 Audio AC'97 Codec) works, onboard ethernet(Realtek 8110S Gigabit Ethernet controller)does NOT work. JaS AMD installation with SSE2 SSE3 patch off the DVD had OS X showing correct CPU speed and Ram. Jas 10.4.8 AMD.Intel.SSE2.SSE3
GA-M51GM-S2G nForce430 Works fine. I upgrade my bios with S3G file for overclocking but it doesn't matter. Audio: not fully work. Onboard network: NO. SATA: NO. Onboard Video: 1024x768. Current nitat and titan not supported. JaS 10.4.8 AMD.Intel SSE2.SSE3+ppf1.iso
GA - 945GZM - S2 Intel 945GZ Video is great with JAS 10.4.8, make sure to install the Intel 950 support. Driver for Audio, Driver for Network. IDE works perfectly, SATA works too. JaS 10.4.8 AMD Intel SSE2.SSE3+ppf1.iso + Audio + Network
GA-K8N PRO SLI F-9 nForce4 ULTRA SATA WORKS DIRECTLY , GIGABYTE 6600 ULTRA WORKS , FIREWIRE WORKS, PATA WORKS , SOUND WORKS

REBOOT WORKS ALL OUT OF THE BOX WITH TUBGIRL 10.4.9 AMD

TUBGIRL 10.4.9 AMD
GA-8S661-FXM-775 rev.1.x SiS 661FX/964L Core board works fine, but no integrated peripherals. Onboard audio: NO. Onboard network: NO. Onboard SATA: NO. Onboard USB-2: works as USB 1.1. Onboard Video: not tested. Using Radeon 9600 Pro AGP (shows as PCI), QE CI and OpenGL working out of the box, but video has some issues, must change monitor resolution using boot parameters, mouse tearing artifact, no monitor color calibration. Parallel ATA works but needs Bikedude880's patched APPLEVIAATA.kext to get full speed (it shows as SATA in System Profiler after the patch, needs flag -f at boot parameters). CPU Celeron D 351 3.2GHz shows as "Unknown CPU 3.2GHz". JaS 10.4.8 AMD.Intel SSE2.SSE3 defiant diskutil biker880 ICH7-R patch integrated.iso

[edit] MSI

Hardware Name (socket type) Chipset Notes Fully working without patching
K8N Neo3
(Socket 754)
nForce4 - 4X AMD Sempron 3000+, Socket 754, Realtek ALC656 audio works, Ethernet does not work, PATA works, GeForce 7300GT Titan + original kext Yes, AMD ISO SSE3 10.4.8, kernel 8.8.1, original 10.4.8 kexts, Titan
K8N Neo4-F
(Socket 939)
nForce4 - 4X AMD Opteron 175, Socket 939, Realtek AC97 audio works, Ethernet working with 10.4.7 IONetworkingFamily.kext + forcedeth, PATA works, PS/2 doesn't work, GeForce 7300LE Titan + original kext Yes, OSX_AMD_1048 iso, kernel 8.8.1, original 10.4.8 kexts, Titan
K8N Neo4-FI
(Socket 939)
nForce4Ultra - 4X AMD Athlon 3800+ X2, Socket 939, USB & Firewire works, Realtek AC97 audio works, Ethernet working, SATA works with nForce4 SATA patch, Shutdown works, Reboot doesn't Yes, almost perfect with OSX_AMD_1048 SSE2 SSE3 with ppf1+ppf2 iso, kernel 8.8.1 only SATA needs patching
K8N Neo4 Platinum
(Socket 939)
nForce4 Ultra AMD Athlon64 3000+, Socket 939. On-board: Realtek ALC AC97 audio, PATA, Marvell-Yukon Gigabit LAN, all work. PS2 keyboard with USB Mouse disables keyboard. Disabled USB Support in BIOS and used PS2 adapter on mouse as a temporary fix. Haven't found the right driver/hack to make them coexist yet (probably on the forums somewhere). Also, possibly due to nforce4 issues, DVD drive must be set to MASTER and target hard drive to SLAVE (mine was on other IDE channel) for the installation disc to load the Installer. In most other configurations, I was getting stuck during boot (of the DVD) with "IOATA/waiting for root" errors. Nvidia LAN, SATA, and RAID controllers not yet tested. Related components: Hawking HWP54G Wirelesss Card (with Ralink.com Mac Driver for PCI/mpci/CB RT256x/RT266x), Nvidia 6600GT (not fully tested, but functions). Yes, with mentioned tweaks and untested exceptions. Used Mac OS X 10.4.8 JAS Intel-AMD-SSE2-SSE3 with PPF1 and PPF2.
RS482M4 - IL ATI Radeon xPress200 / SB450 All works, but the network card. Firewire not yet tested JaS 10.4.8 DVD for Intel SSE3 (reseed)
K8T Neo-FSR VIA K8T800/VIA VT8297 Bios AMI 7.1 / AMD Athlon 64 2800+ (Newcastle), Socket 754 / SSE2 max, no SSE3, but Maxxus patches for SSE3 Emu on SSE2 work fine (on DVD) / Realtek 8169 GbEnet works with patch (insanelymac.org) / Realtek/VIA8297 AC'97 audio works with Azalia extra on DVD (Mic and 2ch out only) / M-Audio MobilePre USB audio (M-Audio installer from website) works excellent with full features / TexInst Firewire PCI gives full FW400 out of the box / USB 1.1 works only (not 2.0) / SATA not tested / NVIDIA GeForce FX 5200 works with Titan extra (DVD), no CG/QE, but 5200-specific installer (insanelymac.org) gives 5200 full features, including Core Graphics and Quartz Extreme - really beautiful Mostly / JaS/Semthex 8.8.1 AMD Intel Defiant 10.4.8 / Only a couple easy patches to make almost fully working - Just no USB2.0, a real problem. Run 2.0 devices through 1.1 hub and they mount ok
K8T Neo - FIS2R VIA K8T800 Bios AMI 7.1, AMD Sempron 3400+, Socket 754, Realtek 8110C ethernet works, audio Ac97 ALC655 works, USB works, SATA works, Nvidia XFX 5500 Titan + original kext Yes, AMD ISO SS2 10.4.8, kernel 8.8.1, original 10.4.8 kexts, Titan
K8N Neo2 - FX NForce3 AMD Sempron 3200+, Socket 939, all works well, SATA not tested, Nvidia FX5700 (Asus) - works fully w/Natit kexts, need to change card ID in .plist JaS AMD Intel ISO 10.4.8, kernel 8.8.1, w/Natit kexts
K8N Pro-SLI nForce4 SLI MCPs AMD Sempron 3200+, Socket 939, Everything worked (except S-ATA) out of the box, including onboard networking, and sound. Drivers for video card needs patching for Nvidia NX8800GT (MSI) but will work regardless in 1024x768 mode. Note: Did not install natively on the system (through bios and booting to the system) but it did install through VMWare to an extra hardrive, then fully booted natively after that, the kexts for video that came with it caused issues so heads up. JaS OS X 10.4.8, AMD/Intel, SSE2, SSE3 with PPF1
K9N Platinu=m nForce 570 AMD Athlon 64x2 4200, Socket AM2, GeForce 6600 works fully with Titan extensions as long as you add the device and vendor id, Buffalo WL12-PCI-G54S wireless card, SATA needs meDevil/bikedude nForce4 kext and is readonly JaS AMD Intel ISO 10.4.8, kernel 8.8.1, w/Titan kexts, needs additional kext for SATA
K9VGM-V
(Socket AM2)
VIA K8M890 AMD 64 +3800, Onboard Video (VIA Chrome9), no QE/CI, USB works, Audio needed ALC883Audio.pkg, LAN needed VIA Rhine driver, SATA works editing AppleVIAATA.kext with 0x05911106. Jas 10.4.8 AMD INTEL SSE3 SSE2, ppf1 and Deviant ppf applied, needed kexts for audio and ethernet
K8N NEO PLATINUM
(Socket 754)
nForce3 250Gb AMD Sempron64 2800, Radeon x1600pro AGP with QE/CI enabled (fast OpenGL but a bit slow Finder performance), USB works, ALC850 Audio works, integrated LAN works out of the box (Although as 100mbps, not GbLAN), SATA not tested, Firewire works. JaS 10.4.8 AMD Intel SSE2 SSE3.Defiant diskutil fix.iso, no other patch applied, fully working system

[edit] PC Chips

Hardware Name (socket type) Chipset Notes Fully working without patching
M861G(V1.6A) (Socket 754) VIA K8M800/8237 Almost everything without problems
  • Sound and SATA works fine
  • boots up with SATA HD
  • LAN is dead at first but works with VIA Rhine Driver
  • PATA works with a DVD Drive
  • USB works fine, even with USB stick
  • Change resolution this way
OSX_1048_AMD.iso

[edit] Tyan

Hardware Name (socket type) Chipset Notes Fully working without patching
[2] Tyan Thunder K8WE (S2895) Almost everything without problems
  • Only sees 2 cores
  • When 4 sticks of 1GB are installed, says 4 sticks of 8GB
  • Sound and Ethernet Work Fine
  • Does not recognize SATA
  • PATA works with HD and DVD Drive
  • USB works fine, even with USB stick
  • Change resolution this way
OSX_1048_AMD.iso (BikeRider and Medevil Patched)

[edit] Intel


[edit] Abit

Hardware Name (socket type) Chipset Notes Fully working without patching
AL8 945P/ICH7 Works : FULLY FUNTIONAL system in 30 minutes (EVERYTHING BUT ETHERNET AND SOUND NEED UPDATED AFTER INSTALL) jaS 10.4.8 AMD/INTEL Patched SSE2 SSE3
Ai7 Intel 865PE / ICH5R) Works: Everything. USB2 with developer patch, Lan 10/100, 1394, Realtek AC97 Audio I/O, SPDIF Out, MIC. SATA/PATA. ATI 9600XT QE/CI Callisto/AGPGart, OC Prescott 3.5GHz. S1 Sleep is OK JaS 10.4.8 DVD for Intel SSE3 (reseed) Semthex 8.8.1 Beta 8
IG-80 Intel 915G / ICH6 Works: Video with GMA 900 & 950 (both required) video is clean, no tearing, no artifacts QE/CI listed as unavailable (PCI-E not tested). USB with no patches (tested with 1Gb key & bluetooth), onboard ethernet does NOT yet work (listed as IC Plus IP1000 Gigabit ethernet (VEN:13f0 DEV:1023), no go so far. shows up in system profiler, ifconfig does NOT see the interface), 1394 not tested, Audio stereo only tested (Realtek AC97), SATA #1 functional (3 others not tested), PATA functional, Suspend not tested. Issues: Nothing shows on PCI bus, Realtek 8169 Ethernet is plugged in but not recognized on PCI bus, but is recognized (used RTL1xxx_1.02.pkg), will panic if plugged in or used for a bit -odd. Will update when more info is available. NOT fully functional but tested with JaS 10.4.8 DVD AMD/Intel SSE2 SSE3
IC7-G Intel 875P (MCH) / 801ER (ICH5R) Works: Everything. USB2 with USB developer patch - 261.4.2-Log, GigE Lan - Intel CSA, 1394, Realtek AC97 Audio, SATA/PATA. Minor Issues: S1 suspend only works when done manually from keyboard hook. JaS 10.4.8 DVD for Intel SSE3 (reseed)
AW9D-MAX Intel 975X Firewire,SATA&ATA work without patch.

Dual GBit ethernet & AudioMAX 7.1 works after patch. Can't use external USB2.0 Hard drives.Patches are available to fix that issue,just haven't tested them myself.

Jas 10.4.8 SSE3 Semthex 8.8.1 kernel
IL9 Pro Intel 945P/ICH7 Works with JaS 10.4.8 Intel SSE3. Onboard ethernet (Realtek) works after installing drivers from here, no onboard sound (ALC883 - detected after applying patch for ALC883Audio--Sound Works Fine after patching with Azalia driver..).
[Update: Installs fine with Jas 10.4.8 AMD INTEL SSE2.SSE3 pf1+defiant+bikedude880ICH7, but will not boot (Repeatedly shows grey screen with "Reboot your computer ..." message, no matter what config you install). Booting with -v option shows ACPI-related errors resulting in kernel panic.]
Yes, for JaS.10.4.8.Intel.SSE3
AB9 Pro Intel 965P/ICH8R Installation via VMWARE 5.5. Boot from JaS.10.4.8.Intel.SSE3 into Terminal and then run Installer from Jas 10.4.8 AMD INTEL SSE2 SSE3 pf1+defiant+bikedude880ICH7. Sound in 2 channel mode worx with ALCInject, Dual Ethernet with Realtek R1000 Patch. SATA+ATA from ICH8R and/or JMicron (IDE or AHCI) works by modifying AppleVIAATA.kext (for IDE support) or AppleAHCIPort.kext for (AHCI) and inserting dev-ids: 2363197b for JMicron, 28208086 + 28258086 for Intel ICH8R. Firewire works when USB2 is disabled in BIOS. Tough, but once configured it stays stable... No.
AW8D 975X/ICH7-R Works : Everything except Silicon Image Sata Controller
  • Sound : Audiomax ALC882M works with Taruga's Apple HDA Solution v04b
  • Lan : Dual Realtek 8111B Gigabit Lan : recognized as Built-in-Ethernet with realtek installer from here
  • usb, sata, ide, fw, all work
needs the two installers mentioned

[edit] Albatron

Hardware Name (socket type) Chipset Notes Fully working without patching
PX865PE7C Pro Intel 865PE/ICH5 If you have had this tested please edit and let us know Not tested yet
PX865PE Intel 865PE Everything works, except LAN. Get a cheap Realtek PCI LAN Card. Yes

[edit] AOpen

Hardware Name (socket type) Chipset Notes Fully working without patching
SIS-s661Fxm (s478) s661Fx Works: USB2, MIC. SATA/PATA., Prescott 3.0GHz. S1.

Not Works: Net, Audio

JaS 10.4.8 DVD for Intel SSE3 (reseed)

[edit] ASRock

Hardware Name (socket type) Chipset Notes Fully working without patching
4CoreDX90-VSTA VIA P4M900 Works with plenty of fiddling (just follow the 4CoreDual-VSTA & 775Dual-VSTA instructions): Audio (needs ALC883 installer), Network (needs this pinxue driver). VIA Chrome9 HC no Core, no Quartz 1024x768 Max. Not tested: SATA.. No, 10.4.8 (JaS AMD-Intel-SSE2-SSE3)
4CoreDual-SATA2 VIA PT880 Works out of the box: PATA, USB. Network (needs this pinxue driver). Not tested: SATA, Audio No, 10.4.8 (JaS AMD-Intel-SSE2-SSE3)
4CoreDual-VSTA VIA PT880 Works out of the box: PATA, USB. Works with easy patching: Audio (needs ALC888 installer), Network (needs this pinxue driver). Not tested: SATA No, 10.4.8 (JaS AMD-Intel-SSE2-SSE3)
775TwinsHDTV ULi 1573 Video OnBoard has not been tested since an alternate PCIX card has been used (GeForce 7300LE 256MB) and worked fine. No Onboard LAN, No Sound. USB works if USB Legacy is disabled within BIOS. Maybe editing config files using "sudo" from terminal might help get LAN and Sound. However got LAN working on installing an extra Realtek 8139 PCI card. Looking for Realtek AC 97 Audio ALC850 kext. Disk access speed very low (2MB/sec) No
775Dual - VSTA VIA PT880 Pro/Ultra Will not boot with private (original) seed, error "still waiting for boot device." Use reseed, make sure to check the VIA ULi SATA patch. Upon FIRST reboot, I installed Apple's latest USB patch, deleted extensions.mkext and extensions.kextcache, repaired disk permissions, THEN reboot. Otherwise, it will not boot again giving the "still waiting for root device error." Network patched with Rhine II driver (pinxue). Likely the same apply for 4CoreDual-VSTA. No, patched on 10.4.8 (Semthex) reseed
775i945GZ i945G Manually updated from 10.4.6 to 10.4.8 Semthex Kernel Beta 5, everything works fine, sometimes it takes a few minutes to get graphics back on after sleep mode. Mind the BIOS-settings! No patching needed
775i945GZ i945G Installed with Jas 10.4.8 disc, everything worked out of the box except from audio alc888 (just install Azalia.kext from skippyretard, no plist edition is needed but you'll get only 2 channels out, the one made especially for alc888 won't work). Everything else is working, ATA, SATA2, core 2 Duo E4300 (also tryed celeron D), video QE and CI, LAN, memory dual channel, USB2.0, event internal USB2.0. You'll get problems with midi if you try to update to jas 10.4.9 and you'll need to disable cpu limit in bios. You also will have to fix the apple file sharing. Almost, only audio.
ConRoe945G-DVi Intel 945G Everything but sound & network jack worked out of the box. See JAS install instruction for enabling the sound and the network jack. Started at 10.4.6 and updated using the Kiki Combo Updater. Got an error after installing the updater, but all was working after the reboot. NOTE: Display does not wake up after sleep (on-board video). Use 10.4.7 if it's an important feature for you.

Only the USB ports directly on the MB works. Not the ones that you connect to the pin connectors.

No
ConRoe1333-DVI/H Intel 945G Everything but sound & network worked out of the box, installed painlessly with JAS 10.4.8 SSE2/SSE3 Intel/AMD DVD, be sure to select Intel 950 graphics options. Followed instructions for network and audio under Conroe945G-DVI link (above), both work fine now. Front USB ports and dual video (VGA + DVI-D) both work. 10.4.9 hackintosh upgrade works fine with 8.9.1 kernel. 10.4.10 not tried. Won't wake from sleep. No. Requires DaemonES R1000 network drivers and manual audio kext fix (see Conroe 945G-DVI link).
ConRoe XFire-eSataII Intel 945P / ICH7R Everything works, only needs network drivers. Sound does not work. No
775i65 Intel 865G / Intel ICH5 USB, Audio (line out as output), SATA, IDE, Onboard Video (1024x768 w/o QE+CI), LAN are working well straight out of the box. Careful with AGPGart (Version 1.2 works!). Good performance (Celeron 2,66 -> 90Pts. @ XBench). Sound seems to be scratchy in videos. No
P4I65G Intel 865G / Intel ICH5 Ethernet works. USB works. Sounds works but sound enhancement must be turned off in itunes for high bit rate mp3 files to not cut out. SATA works. X-Bench Result 95.63 Jas 10.4.6 SSE2/SSE3 + Apple 10.4.8 combo + eGWan Intel.SSE3 10.4.8 combo using DaemonES 8.8.1 + 10.4.9 SSE3
P4I65G Intel 865G / Intel ICH5 Everything works (Prescott SSE3 CPU, Nvidia GFX Card). SATA and Onboard GFX untested. When installing uphuck, use : Universal Kernel 2, loginwindow patch, IOATAFamily from 10.4.8 (may be unnecesary), Remove CPUPowerManagement and RemoveThermalKexts. Add Natit 0.2 for an Nvidia Graphics Card - dual output works, which is sweet! uphuck 10.4.9 v1.3
P4VT8 VIA PT800 / 8237 southbridge With Prescott CPU : Haven't played with this too much, but i couldn't get the sound to work (this mobo seems to have a strange feature wherby the onboard sound is disabled if another device with the same PCI class - ie sound card - is present, and i couldn't be bothered to yank out my SB Live!) .ViaRhine kext didn't like the onboard ethernet. USB is also a problem (although i haven't tried the developer drivers). With these problems didn't consider it worth too much investigation. Tried a 10.4.6 release too (forget which one), but this didn't boot at all. No (10.4.8 JaS Reseed)
P4V88 VIA PT880/VT8237 Working without pacthing: SATA, USB(only 1.1, 2.0 not support), ATA. AC97 works with AppleAC97.kext fixed, dual channel. LAN works with VIARhine.kext. Very Nice Board, works perfectly with Pentium 4 CPU No, Jas Mac 10.4.8 with Semthex 8.8.1
P4VM890 VIA Northbridge Via P4M890 / Southbridge VIA VT8237R Plus / Pentium 4 2.8A Prescott (no HT) Working without pacthing: USB 2.0 fully functional, PCI-X Card NVIDIA Geforce 6200 LE supported natively (update! VGA working - DVI out not working-no dual display, in system preferences), LAN works with VIARhine.kext, no sound waiting for Realtek ALC653 patch. SATA Untested.
P4VM800 VIA Northbridge Via P4M800 / Southbridge VIA VT8237 / Intel Celeron D 315, 2266 MHz Working without pacthing: USB (2.0 not tested), LAN works with VIARhine.kext, Sound - 2 channels with patch for AppleAC97AudioVia.kext, intergraded video s3unichrome as VESA3.0 (no QE,CI). SATA Untested. PATA Maxtor 40GB ok, HL-DT-ST DVDRAM GSA-4167B ok Jas 10.4.8 SSE2/SSE3, patching needed
AM2NF3-VSTA NVIDIA® nForce3 250 Everything works. No Mac OS X 10.4.8 [JaS AMD-Intel-SSE2-SSE3 with PPF1]
775VM800 VIA P4M800
  • SATA works
  • USB works
  • Onboard sound works
  • Onboard video works at 1024x798
  • LAN works using the VIA Rhine driver
Yes, Jas 10.4.8 AMD/Intel SSE2 SSE3

[edit] Asus

Hardware Name (socket type) Chipset Notes Fully working without patching
P4B266-C (Socket 478) Intel 845D Install using JAS 10.4.8 Don't istall any audio, video, network drivers Works fully, but you need cmi8738.kext for audio and natit.kext for video card. Network works out of box.
P5VD2-MX (socket 775) VIA P4M890 VIA VT8237A Everything works perfect except SATA and Audio needs to be modified. For the VIA 8237A SATA this link worked fine. Haven't tested the JMicron Controller. For the AD 1986A Audio only this solution link seemed to work.

Haven't tested the onboard Graphic Card.

No - The SATA and Audio needs patching.
P5GPL (socket 775 Intel 915PL Motherboard worked out of the Box with JaS OS 10.4.8 Intel AMD iso. Gigabit Ethernet, USB, Audio (output only, if someone knwo a fix, please add it here). Haven't tested SATA but IDE disk works fine. Uses a Sapphire Radeon X1300 512MB card, worked out of the box with the installere, thanks to the patches included on the DVD. YES - Jas 10.4.8 with Semthex 8.8.1 kernel /no patching needed, but Output ONLY
P4VP-MX (Socket 478) VIA P4M266A JAS 10.4.8 installs and boots. During installation, only Intel package and Base Package installed. USB Mouse works, PS2 Keyboard works. Did not test integrated ProSavage Graphics Card. Audio seems to work. Network does not work out of the box but works perfect with ViaRhine.kext. System will only boot into Safe Mode if ATI Drivers for AGP installed during setup, it is advised not to install that driver in this release of OS. (Graphics card used in test system - PowerColor X1600 Pro 512MB). When in Safe Mode, sound does not work. Test System used Celeron D 330 (SSE3 support). Network needs kext installed. Sound works in normal mode, but not in Safe Mode.
P4P800 SE Intel D865 (478) Mainboard is OK, Geforec FX 5200 Ok

Lan Marvell is nothing and the same with USB Controller

YES - Jas 10.4.8 with Semthex 8.8.1 kernel / sound needs patching
P4PE Intel D845 (478) Works with ATI X1600 Pro.

Had to modify ad198x file for audio, and use a modified driver for LAN.

YES - Jas 10.4.8 Intel AMD SSE2 SSE3 / sound and lan needs patching
P5GL-MX i915GL (478) Everything works except video driver requires Diabolik GMA 900 patch.
  • Do not install GMA900 driver upon install, once its installed (res:1024*768), run Diabolik GMA 900 and then open Disk Utility and repair disk permissions.
  • Audio works wit Azalia driver bundled with the DVD.

" in my sysem ethernet is not woking/

  • 10.4.9 compo installed over 10.4.8 system crashed
No
P4S333-M SiS645 (478) Everything works except sound needs SiS 7012 AC97 driver [3]
  • Nvidia GeForce FX 5200 (CI/QE enabled) using Titan kext
  • installed Intel SSE2 patched from dvd installer
  • upgraded to Semthex 8.8.1 kernel from dvd installer
  • installed about mac fix just incase
  • Everything almost works out of the box except sound but can be easily fixed
YES - Jas 10.4.8 with Semthex 8.8.1 kernel / sound needs patching
P4C800-E i875 (478) All work (Semthex kersdfn.), LANsdf, ausdffdio in/out, Sata, Graphics card x1600pro AGP work with NeoPheus patch YES 10.4.8 DVD
P4P800 Deluxe i865PE (478) IDE, Sound All working, LAN works with Marvel Youkon Driver, SATA/RAID not tested. JaS 10.4.8 DVD SSE2/3 Intel/AMD with PPF, Semthex 8.8.1
P4S800 SiS648FX Still waiting for root device, incompatible chipset NO
P4S800D-X SIS655FX (478) Everything but the SATA (SIS 180 RAID) & onboard LAN -added PCI Intel8255. Patched Audio with [4] SIS7012.zip Also patched USB with USB DEBUG KIT 261.4.2
  • P4 2.8 HT
  • Nvidia Geforce 6800 GS OC BFG / dual head DVI-VGA 1280X1024
No, JaS 10.4.8 DVD SSE2/3 Intel/AMD with PPF1, Semthex 8.8.1 need patching & audio no input -output through input
P5P800-SE Northbridge Intel i865PE / Southbridge ICH5 Cpu is always seen as 4.0 GHz, Every component works, only for the audio output, connect speakers to the mic jack No, all components work from 10.4.6 to 10.4.8
P5P800-MX Intel 865GV chipset I am running a Celeron 2.66Ghz D, recognized no problem. Onboard Video, Onboard Sound, Onboard LAN, all working without extra patches. Haven't tested other things such as USB yet. But the most important things are working just fine. Yes, JaS 10.4.8 w/ PPF2.0
[(P4b-533-e deluxe)] Intel 845 chipset "Jas 1048 intel/amd SSE2/SSE3 ppf1+diskutil fix" USB/LAN/Firewire working, audio working with dogberts ac97 kext, highpoint raid not working Yes, JaS 10.4.8 w/ppf1 + diskutil
PTGD1-LA Northbridge Intel i915G / Southbridge ICH6 Built-in GMA900 video patched using B512's AppleIntel915.kext, some mouse tearing and artifacts still visible. Onboard sound ALC880 HD Audio patched using AppleAzaliaAudio.kext, 2 channel output only; no line-in or mic. Onboard NIC patched using AppleRTL8139Ethernet.kext JaS 10.4.8 DVD for Intel SSE3 (reseed) Semthex 8.8.1
P4P800 VM

ASUS Page

Intel 865G GMCH / ICH5 Everything seems to works smoothly, SATA, network, USB. Audio works stereo, but output jack is mic in by default but but you can fix it by modifying the file:
/System/Library/Extensions/AppleAC97Audio.kext
/Contents/PlugIns/AppleAC97CodecAD198x.kext
/Contents/Info.plist
  1. Change any one of them (ADS75 ADS74 ADS73 ADS72) to ADS70
  2. The next step is load the AppleAC97CodecAD198x.kext

With the 10.4.6 myz install disc + jaz 10.4.7 update: video with VESA 3.0 driver, no CI, no QE (no kext load, not even if editing the 830.kext). On szed as an ADP2,1 (development platform).

Yes
P5B Northbridge Intel P965 / Southbridge Intel ICH8 To install: plug a DVDreader un usb,or use a SATA DVD Driver. Turn off jmicron controller. Plug a sata HD on ich8 sata ports, and select AHCI mode in bios. After install: renable jmicron...it works for eide and sata (but not for boot) - Usb need apple patch - Audio need editing of appleazalia.kext - LAN realtek 8111 need [5] JaS 10.4.8 DVD for Intel and AMD
P5B Premium Vista Edition Northbridge Intel P965 / Southbridge Intel ICH8 2nd lan chip not working. marvel lan and audio needs patching. audio only one channel. untested yet: iremote, jmicron, firewire JaS 10.4.8 SSE3 Intel.Only.iso
P5B-E Northbridge Intel P965 / Southbridge Intel ICH8R Works: USB, Firewire, SATA
Needs Patching: Sound, JMicron PATA controller
Doesn't work: Attasic L1 LAN (How to fix this ?)
JaS 10.4.8 DVD for Intel SSE3 (reseed)
P5B-E Plus Northbridge Intel P965 / Southbridge Intel ICH8R Works: USB, Firewire, SATA (ICH8R)
Needs Patching: Sound (Refer to P5B guide), Lan Port Marvell 1Gb (Use AppleYukon Patch)
Doesn't work: Resume (Powermanagement function sleep seems to work)
JaS 10.4.8 Intel.AMD SSE2.SSE3 +PPFv1 (0ef2904e0aad1864c69b2ac67e050255)
P5B Deluxe WiFi Northbridge Intel P965 / Southbridge Intel ICH8R Works: USB, Firewire, SATA (ICH8R)
Needs Patching: Sound (Line-out only), JMicron PATA controller, One Lan Port
Doesn't work: 2nd lan port, WiFi
JaS 10.4.8 DVD for Intel SSE3 (reseed)
P5B Deluxe Northbridge Intel P965 / Southbridge Intel ICH8R Works: USB, Firewire, SATA (ICH8R)
Needs Patching: Sound (Line-out only), JMicron PATA controller, One Lan Port
Doesn't work: 2nd lan port
JaS 10.4.8 DVD for Intel SSE3 (reseed + 1st seed)
P5GPL-X Northbridge Intel 915PL / Southbridge Intel ICH6 intel gigabit lan:working natively , HD working natively on SATA or EIDE, USB:ok , audio: edit appleazalia.kext. Jas 10.4.8 intel+amd release
P5GPL-X SE Northbridge Intel 915PL / Southbridge Intel ICH6 Works: SATA and PATA, USB 2.0

Needs Patching: Gigabit Ethernet: use Marvell Yukon 88E8001 driver, Audio Out: use AppleAzaliaAudio.kext Not Working: Audio In

JaS 10.4.8 Intel.AMD SSE2.SSE3 DVD
P5GD1-VM Northbridge Intel i915G Jas 10.4.8 intel re-seed, there is a bug with install of GMA900 video drivers to get QE/CI : need to remove AppleIntelGMA950*.kext and /System/Library/Frameworks/OpenGL.Framework, then apply GMA900 drivers package from dvd again. Onboard sound work using AzaliaAudio.pkg, output channel only ; no line-in spdif or mic. JaS 10.4.8 DVD for Intel SSE3 (reseed)
P5GD2 (Socket 775) i915 / ICH6 Marvell Yukon LAN (WORKING), HD Audio (Working Mostly) with Azalia Patch on DVD (Volume control from menu doesn't work, but volume is adjustable in apps / Have not tested anything but sound out). eVGA GeForce 6600 256MB PCI-e working well with Natit Drivers. USB / SATA / IDE All Working. JaS 10.4.8 Intel.AMD SSE2.SSE3+PPFv1 + Defiant's PPFv2 DVD
P5GV-MX

ASUS page

Intel 915G Everything work with 10.4.7 GMA900 patch (for 10.4.8 or 10.4.9 I did the following [steps]here: Yes
P5GZ-MX

[6]

Intel 945GZ Everything works; Intel 950 GMA graphics work at install; Marvell Yukon LAN works with this, HD Audio (ALC883) works with this. Note that if you want to use a PCI-E graphics card instead of onboard graphics, this board only supports PCI-E x4 and a limited set of compatible cards. Yes, JaS 10.4.8 Intel.AMD SSE2.SSE3+PPFv1 + Defiant's PPFv2 DVD
P5LD2 Intel 945P / ICH7R Work: HD Sound ALC882: line-in & line-out fully supported with new AppleHDA from Taruga.

Doesn't work: SATA Ports in RAID or AHCI mode, ITE8211 ATA Ports

JaS 10.4.8 SSE3 original seed (running on 200Mhz FSB) (10.4.7 + upgrade) as well as 10.4.8 SSE3 original seed reinstall, all with kernel semthex 8.8.1
P5LD2-VM Intel 945G Everything works perfect. Sound ALC882: line-in & line-out fully supported with new AppleHDA from Taruga :) JaS 10.4.8 SSE3 reseed with kernel semthex 8.8.1
P5LD2-VM Intel 945G See above. A note about the sound: you've got a choice of line-in/line-out and dirty sound (AppleHDA) OR a clean sound with no line-in/line-out (AppleAzalia). Tested both. JaS 10.4.8 SSE3 reseed with kernel semthex 8.8.1
P5LD2-VM (socket 775) Intel 945G/ICH7 All working except red IDE port (no worries since I'm using a SATA II hard drive). Must connect DVD drive to blue IDE port. Used JaS 10.4.8 AMD/Intel SSE2 SSE3 reseed w/semtex 8.8.1 kernel. I had problems with it not loading USB drivers on boot (after 1st install), fixed after customizing installation and unchecked printer drivers and checked most common hardware. Fixed sound w/Taruga's 0.4b HDA patch. There is a full how-to guide on the Asus P5LD2-VM on insanelymac forum. This is a motherboard which you can make into a fully functional Mac. Yes, patched sound
P5LD2-VM Intel 945G / ICH-7 Works right out of the box. E-IDE does not work. Set BIOS Correctly for GbE LAN to Work properly. ALC882 Fix with Taruga HDA patch V.04. Refer to the Asus P5LD2-VM How-To Guide in the Genius Bar. JaS 10.4.8 SSE3.Intel Only.iso or JaS 10.4.8 AMD/Intel SSe2.SSe3.v2.iso
P5LD2-VM DH Intel 945G / ICH7 (DH) BIOS version:0602 Work: Everything work with 10.4.8 Jas install DVD/semthex kernel. HD Audio (Realtek 882) working with this guide (line out (2 channels), spdif (digital out), line in, mic in). Doesn't work: SATA Ports in RAID or AHCI mode, ITE8211 ATA Ports Yes -sound needs patch
P5LD2-VM SE

ASUS page

Intel 945G Everything work with 10.4.8 Jas install DVD/mifki kernel (sata,network,gma950 all work straight out the box, NOTE this is the SE "no raid" board - sound requires modified appleHDA.kext gives line out, spdif (digital out), line in, mic in Yes -sound needs patch
P5L-VM 1394 Intel 945G / Intel ICH7 Work: Everything works except for Attansic ethernet chip. HD Audio (Realtek 883) only 2 channels working with some modifications (ALC883) you need to follow this guide.

Doesn't work: line in, ADD2 card

JaS 10.4.8 SSE3 reseed with kernel mifki 8.8.1
P5L-MX Intel 945G As with P5L-VM, everything works (SATA, USB, IDE) except for the Attansic ethernet chip. Note: you need an IDE HD connected to boot the JaS DVD, otherwise you get "Still waiting for root device". (Note this is fixed with the ICH7/ICH8 biker880 ppf). Analog Devices/Intel HD Audio (AD1986A) works on 2 channels out with Vendor and Device ID edit in AppleAzaliaAudio.kext. Procedure here. PCI-IDs Ven:11d4 Dev:1986 (Soundmax 1986) and Dev:27d8 Ven:8086 (Intel ICH7 HD Audio Controller). Follow the usual AC97 guide to have it working. No mic. Sound out on back panel only. GMA950 works on this board with QE+CI (Install JaS package from 10.4.8 DVD. JaS 10.4.8 with mifki or semthex 8.8.1 Kernel
P5PE-VM i865G (775) Fully working except onboard LAN, which needs skge.kext, sound on mic jack 10.4.8 DVD
P5V800-MX Northbridge VIA P4M800 / Southbridge VIA VT8251 Works: Video VGA and network (Realtek PHY adapter in chipset) after installing ViaRhine driver USB No Longer Broken In 10.4.9 SSE3

Doesn't work: remaining Southbridge facilities: no sound, no SATA

JaS 10.4.8 DVD for Intel SSE3 (reseed)
P5VDC-X Northbridge VIA P4M880 Ultra / Southbridge VIA VT8237A Works: Network after installing ViaRhine driver,USB works out of the box.
Doesn't work: Sound, SATA(Can be realised by editing AppleVIAATA.kext and adding device ID) as far as I can see there is no AGP accelleration
JaS 10.4.8 DVD for Intel SSE3 (reseed)with Semthex kernel and Loginwindow patch
P5VDC-MX Northbridge VIA P4M800 PRO / Southbridge VIA VT8251 Works: Network after installing ViaRhine driver, USB works after installing this driver.
Edit AppleVIAATA.kext using ID:0x33491106 for full SATA support
(still) doesn't work: Sound (AC97 VT8233 ALC655)
JaS 10.4.8 DVD AMD Intel SSE2 SSE3
P5WD2 Northbridge Intel P955x / Southbridge Intel ICH7R
  • Works: Dual Core Pentium D, USB 2.0, PATA, SATA
  • Needs Patching: ALC882 Sound (works with ALC882_AppleHDA_v0.4b.mpkg.zip), Marvell Yukon 8001 LAN card (works with skge.kext.zip - unzip, copy to /System/Library/Extensions/ and reboot.)
  • Not working: PS/2 connectors. Have to use USB KBD and mouse.
JaS 10.4.8 Intel/AMD SSE2/SSE3 PPF1 PPF2, semthex:/nebukadnezar kernel from Dec 9, 2006, LoginWindow patch.
P5WD2 - Premium Northbridge Intel P955x / Southbridge Intel ICH7R Works: USB, Firewire, SATA

Needs Patching: Sound, Doesn't work: Marvelle Lan, reading of sensors other than on HD for temp

JaS 10.4.8 DVD for Intel SSE3 w/semthex
P5W DH Deluxe Intel 975X / ICH7R Work: Everything works perfect. HD Audio (Realtek 882) all function with ALC AppleHda v 0.4 digital out in and mic line OK.

JaS 10.4.8 DVD for Intel SSE3 w/semthex. And probe 10.4.10 koolkal 10.4.10 combo update intel sse3 and very good function all. with 10.4.10 audio install applehda and AC97 in package kool and reinstall applehda v 0.4. (koolkal 10.4.10 combo update intel sse3 only.mpkg.zip). Wireless (RTL 8187) Doesn't work: Remote. webcams whith macam driver.

Jas install DVD 10.4.8 SSE 3,see Installed ALC882_AppleHDA_v0.4b.mpkg.zip
P5W DH Deluxe Intel 975X / ICH7R Everything works, except sleep. Out of the box I didn't got sound and NIC, but replaced the AppleNetworkingFamily kext with a 10.4.7 version. Audio works with 2 channels and mic + headphones (front) and line-in. Used Jas install DVD 10.4.8 SSE3 + Semthex 8.8.1 Beta 8
P5W64 WS Intel 975x / ICH7R Everything works, except stand-by (it goes to sleep, but it doesn't wake up - reboot required).
  • Lan Marvell Yukon 8052 working with modified Yukon.kext
  • Lan Marvell Yukon 8001 working with skge.kext
  • Integrated Audio working with modified AppleAzaliaAudio.kext copied in Extensions directory, modified ID for ADI1988b and modified ID for ICH7 soutbridge (original ICH6)
Jas 10.4.8 with Samthex 8.8.1 Kernel
P5WDG2 - WS 975x Audio working but it is scratchy, follow the guide, could not get Marvell ethernet drivers to work but I've read that other people have successfully used it in previous builds. Yes JaS Update 10.4.8
P5N-E SLI Nvidia nForce 650i SLI Everything works expect for Ethernet. SATA untest but shows up in system info. Reboot does not work. HD Audio fully works after applying [ALC883Audio.mpkg patch ][IMPORTANT: you have to select Costomize and choose 3ports_digital or else you going to screw it up!]

EVGA Geforce 7900GS work perfect with Macvidia driver. D-Link DGE-530T PCI Gigabit LAN works after applying the [skge.kext patch] and edit info.plist with 0x4C001186.

Jas 10.4.8 SEE2/SEE3 Intel AMD DVD with Semthex kernel 8.8.1
P5N32-SLI Premium Nvidia nForce 590 SLI Everything works expect for Ethernet and SATA. Reboot does not work. On-board audio works with ASUS driver.

Geforce 7600GT work perfect.

Jas 10.4.8 SEE2/SEE3 Intel AMD DVD

[edit] Biostar

Hardware Name (socket type) Chipset Notes Fully working without patching
915P-A7 Combo Intel 915P Audio full supported without patching, Ethernet need patching, video full supported with Natit Driver (7300 GT) JaS 10.4cccd.8 DVD for Intel SSE3
T-Force 965PT Intel 965 Everything Works W/ Minor Editing No, JaS 10.4.8 DVD
945GZ Micro 775 Intel 945 Everything Works W/ Minor Editing No, JaS 10.4.8 DVD
945G Micro 775 SE Intel 945 GMA950 video, LAN, USB2 (front too), SATA, PATA worked out of the box. PS2 was not working at time of install, have not tried to fix. JaS 10.4.8 DVD, netkas, PascalW 10.4.10 update. Full sound worked easily by duplicating ICH6 section of /System/Library/Extensions/AppleAC97Audio.kext/Plugins/AppleAC97AudioIntelICH.kext/Contents/Info.plist and changing key to "ICH7 AC97 Audio", ICH Type to "7", and IOPCIPrimaryMatch to "0x27de8086". "27de" is the device ID for ICH7. Need a SPDIF header, but SPDIF appears in Sound preferences so I think it will work. My E4400 OCs to 2.6ish with stock Vcore on this board.
945P A7A Intel 945 Everything Works W/ Minor Editing (everything but audio out of the box, audio needs patched AppleAC97Audio.kext) No, JaS 10.4.8 DVD
U8668d Ver 7.A Via VT8751 Apollo P4M266 No Works. Still Waiting for root device. No, JaS 10.4.8 DVD

[edit] DFI

Hardware Name (socket type) Chipset Notes Fully working without patching
INFINITY 975X/G Northbridge Intel 975X / Southbridge Intel ICH7R Realtek HD audio works fine (with AppleHDA patch) with minor dropouts but I believe this was due to several thing happening whilst playing the music. Gigabit ethernet fully working (with realtek driver). USB fully working. firewire & video port not tested. JAS 10.4.8, SSE2 SSE3 Intel and AMD, Semthex 8.8.1 kernel
LANPARTY PRO 875B Intel 875P Chipset Tested with P4 2.6Ghz HT 800FSB SSE2, ATI AIW X800XT 8X AGP. Audio works. AGP works. ATA, SATA, USB all work. Intel 82547EI Gigabit LAN works. Firewire & MIDI Port not tested. RAID should work, but not tested. uphuck 10.4.9 v1.2 or v1.3 Installation DVD (universal Intel/AMD x86) (uphuck.com) Remove CPUPowerManagement kext for nophet, sse2, or amd cpu (included setup option).

[edit] ECS

Hardware Name (socket type) Chipset Notes Fully working without patching
P4M800 PRO-M Version 2.0 Via P4M800Pro / VT8237R LAN works with pinxues Viarhine.kext. Sound and USB 1.0 work natively, but installing patch on Jas 10.4.8 for USB 2.0 seems to break it. PATA & SATA work. Has some issues with multiple partitions. Had some issues with root device not found error, but -f will boot. Sound doesn't work in safe mode. Sound out was only in the left speaker, but works perfectly with Realtek ALC655 patched kext. Haven't tested line-in. For some reason USB audio devices (Logitech headphones & iMic) will randomly give off garbled sound. Geforce 7800GS,6200 & 5500 work with titan.kext QE and CI supported. PCI works fine. No, JaS 10.4.8 DVD for Intel SSE3 (reseed) - Currently running 10.4.9 with the latest version (4/24/07) of the koolkal 8.9.1 kernel. Previous kernel revisions wouldn't boot past BIOS.
865PE-A Intel 865PE Audio working (only line out and mic tested), usb working, onboard network working, IDE working, sata untested Almost,R8139 kext from JaS 10.4.7 DVD for network
915P-A v1.2 [7] Intel 915P + ICH6
  • PS2 out-of-box supported (even cheap keyboard with power button works perfect.
  • IDE & S-ATA out-of-box supported
  • USB & USB2 out-of-box supported
  • Onboard Ethernet Realtek RTL8110S 10/100/1000 Mbps. It should work in 10/100base as it worked with ALL previous versions that I tested but alas it doesn't.
  • Audio C-Media CMI9880 8-Channel audio: Only 2-Channel out-of-box supported
  • DVD burning tested with ATA-burner
Mac OS X 10 4 8 - JaS Intel SSE3. LAN-card needs the RTL1xxx_1.02.pkg for 10/100base. No Gigabit-Lan speeds.
945P-A 1.0 Intel 945P Ethernet, USB, SATA, IDE work without patching. Haven't been able to get ALC880 audio working even with patches. Tested with JaS 10.4.7 Intel Only SSE2/SSE3 and JaS 10.4.8 Intel/AMD SSE2/SSE3. Almost - no audio
945GZT-M Intel® 945GZ & ICH7 LAN Works, on board video works, sound works with skippyretards HD Audio drivers, SATA Will work as well. Installed with

Mac OS X 10.4.8 [JaS AMD-Intel-SSE2-SSE3 with PPF1 & PPF2 and everything worked out of the box except the audio which was very easy to install. Also the upgrade to 10.4.9 using the latest walk through here on the wiki worked great.

Audio needs to be patched but that's it.
P4M890T-M2 Via P4M890 / VT8237R LAN works with pinxues Viarhine.kext. Sound and USB 1.0 work natively, but installing patch on Jas 10.4.8 for USB 2.0 seems to break it. PATA & SATA work. Has some issues with multiple partitions. Had some issues with root device not found error, but -f will boot. Sound doesn't work in safe mode. Sound out was only in the left speaker, but works perfectly with Realtek ALC655 patched kext.. Geforce 7300GT works with titan.kext QE and CI supported. PCI works fine. Will not work with BIOS firmware newer than the October 2006 version. Mac OS X 10.4.8 [JaS AMD-Intel-SSE2-SSE3 with PPF1 & PPF2 and everything worked out of the box except the audio and LAN
nForce 570 SLIT-A nforce 4 Lan works with forcedeth if you patch his .plist to inlcude your device id (026910DE), Realtek 883 works with patch found on mac forum. SATA works after you install MeDevils nforce4 SATA patch, so install on an IDE first. Boots first time with the 10.4.8 PPF1 and PPF2 JaS dvd. nVidia 7900 GS KO works perfectly, both displays. SATA, audio, and LAN need to be patched
PT890T-A V1.0 VIA PT890/8237S LAN works with pinxues Viarhine.kext. USB works natively but there seems to be a problem if too many devices at once or a flashdrive in slot at boot. Add devices after boot ..one at a time and wait for recognition. PATA works, but I haven't tried SATA. Unable to get MB sound working, but CT4810 SB card works with Tubgirl disk. Had to use USB sound with JAS disk. Geforce 7300LE works with titan.kext QE and CI supported. Haven't tried tv out. PCI works fine. Mac OS X 10.4.9 (Tubgirl AMD 10.4.8. patched with PPF for 9) and JAS 10.4.8 SSE2 and SSE v3. Everything worked except sound and net out of the box.

[edit] Epox

Hardware Name (socket type) Chipset Notes Fully working without patching
915P Epox Ep-5EDAI Intel 915P Audio full supported without patching, Ethernet need patching JaS 10.4cccd.8 DVD for Intel SSE3
Intel 915 Everything Works W/ Network has Problems JaS 10.4.8 DVD
EP-5ELA3I (775) Intel 915PL Audio & network supported without patching. SATA, ATA, USB work too. JAS 10.4.8, SSE2 SSE3 Intel and AMD
EP-5EPA+ (775) Intel 915G SATA, ATA, USB, Audio worked out of the box. Network needed 88E8001 patch to work. JaS 10.4.8 SSE/SSE3/Intel&AMD

[edit] eVGA

Hardware Name (socket type) Chipset Notes Fully working without patching
680i SLI socket 775 nForce 680i SLI Audio working via AzaliaAudio.pkg.zip (2channel out), IDE/USB/Firewire works natively; no SATA, no ethernet (will try nforce4sata; punted on ethernet and bought a linksys LNE100TX add-in card w/tulip drivers) (Make sure to install titan or you will get screen that promotes you to reset your computer) JaS DVD 10.4.8 (SSE2/SSE3/PPF1/PPF2) (had unable to find root device issues with earlier JaS 10.4.8 release)

[edit] Foxconn

Hardware Name (socket type) Chipset Notes Fully working without patching
865G7MF-SH Socket 775 Intel 865G Audio and Ethernet working, SATA Support not tested JaS DVD 10.4.8
945G7MC-KS2HV Intel 945G Chiset/ GM950 video/ Realtek HDA Audio
  • Install method: TOH 10.4.8
  • Video onboard works fast and perfectily
  • Audio does not work (needs patch)
  • LAN: does not work
  • IDE works fine with CD and DVD
  • SATA not tested
  • I used offboard USB audio (c-media) and d-link USB wifi adapter
  • TOH 10.4.8 install DVD
  • Just video

[edit] Gigabyte

Hardware Name (socket type) Chipset Notes Fully working without patching
GA-965GM-S2 Intel G965 ICH8 Uncheck everything except Intel patches Then use the Natit drivers for video, and these instructions for network card and sound. For walk through. JaS 10.4.8 AMD Intel SSE2.SSE3
GA-965P-S3 rev 1.0 Intel i965 ICH8 Using F8 BIOS & non-semthex 8.8.1 kernel. Tested/Working: IDE, SATA0/1(Purple), AHCI0/1 (Orange), USB1.1/2.0, GBEthernet, ALC883 Multichannel Audio (analog) - up to 7.1/Mic/Line-In Not Working: AHCI4/5 (Orange). Installed with USB2.0 DVD drive, very fast, very stable. For more info, visit this step-by-step guide. JaS 10.4.8 AMD Intel SSE2.SSE3 (patched with ppf1 & defiant disk utility patch)
GA - 8I848P-G Intel 848P MCH / ICH 5 SATA works.LAN drivers are included in Myzar releases. Audio works. HDD works on pata.USB works. Myzar 10.4.8 AMD Final
GA-945GZM-S2 Intel 945GZ / ICH7 Everything works! Out of the box: SATA,ATA,USB work, GMA950 works with QE/CI. Don't install anything extra from the DVD, you're asking for kernel panic!

Network needs this driver (here's the thread) Sound is fully working with skippyretard's AzaliaAudio883.pkg - use the 6 port custom install!

JaS OS X 10.4.8 (AMD-Intel-SSE2-SSE3 with PPF1) + network + audio
GA - 8I945GZME - RH Intel 945 / ICH 7 Semthex Kernel: SATA,ATA,USB work, GMA950 grapihc chip works with QE/CI supported! 2 channel Audio works after applying this hack Fixed, just change 882 to 883. LAN works after recompiling skge driver 8001 kext.

Full Walkthrough for 10.4.8 install here [8]

JaS 10.4.8 Install with Semthex Kernel then upgraded to latest Semthex Nebukadnezar Kernel
GA - 8I945GMH - RH Intel 945 / ICH 7 Everything works except shutdown/restart problem. Audio not tested. Bios sata settings- avoid 'AHCI'. Hotiso 10.4.6 upgraded with 10.4.8 for intel
GA - 8I945GMF Intel 945 / ICH 7 SATA 2, ATA, USB 2.0, Fireware , Video GMA950 works with Quartz Extreme and OpenGL, (Line In / Line Out / MIC In / SPDF Audio works after applying this hack ONLY Kernel 8.8.1), LAN works JaS 10.4.8 Kernel 8.8.1
GA - 8I945P - G Intel 945P / ICH 7 SATA Worked, Audio Worked After use AppleHDA 0.4b Driver, Broadcom 5789 Gigabit Ethernet Controller can work after use the kext that modified Dev id of "AppleBCM5751Ethernet.kext", But cannot recongize the MAC Address. USB is OK, IT8212 ATA/RAID Controller cannot work JaS 10.4.8 Intel SSE3 Only
GA - 945P - S3 Intel 945P / ICH7 Core 2 Duo E6400/1GB/SATA HD...First attempt installed, but then yielded an unbootable system ("unrecognized platform: ACPI" halt w/ restart msg). Second attempt, only installed the AzaliaAudio extra driver and it booted OK. No audio or Ethernet, but RTL1xxx and ALC883Audio worked fine. Also, latest NATIT worked fine w/ my GeForce 7300 GS PCI-E card w/ full CI/QE support. Seems to run GREAT! "JaS 10.4.8 AMD INTEL SSE2 SSE3 beta 2" DVD w/ semthex 8.8.1 and extra drivers (Azalia, NATIT, etc.)
GA - 945G - S3 Intel 945G / ICH7 Pentium Dual Core E2160/1GB/SATA HD, ALC883 audio working, Realtek 8111 Gigabit ethernet working, GMA950 working QE/CI &res change. needs "-legacy" key for recognizing SATA HDD during installation. Dual booting with Chain0 "10.4.9 uphuck v1.3" DVD w/ 8.9.1 kernel
GA - 965P - DS3 Intel 965P Everything works, more information here

demonoid has a patch for Jas 10.4.8 reseed to fix IDE on install disc. Search for "jmb" (no quotes) and it should come up on demonoid

JaS 10.4.8 DVD reseed + pion's package
GA- 965P - S3 Intel P965 Core 2 Duo 6600. Everything installed fine (Using DVD-ROM hooked up via USB). Followed instructions for Western Digital SATAII Drive. Had trouble getting Ethernet running, but fixed with simple file edit. Pion's System profiler fix works after running a second time. JaS 10.4.8 DVD w/ JMicron patch, Pion's Patch, Prasis Kernel Update
GA - 965P - DS3 Intel 965P Everything works, more information here JaS 10.4.8 DVD reseed + pion's package
GA - 965P - DS3P Intel 965Pe Same issues as the DS3 and same fixes. Works fine once patched, USB, Firewire, audio. JaS 10.4.8 DVD + pion
GA - 965P - DS4 Intel 965P Everything works, CPU:Intel Core 2 duo 6300; Graphics:PowerColor X1600 PRO; Display:DELL 2007WFP Harddisk:WDC800JD-75MSA1;DVD-ROM:PIONEER DVD-127P:MERMORY:A-DATA Vitesta DDR2-800...more information here JaS 10.4.8 DVD reseed + OSX 10.4.8 Jmicron JMB IDE patch + AppleHDA Solution(ALC833) + pion's package
GA - 965P - DQ6 Intel 965P Everything works apart from sound works out of the box with JaS 10.4.8 DVDv1, install ALC888 patch and select 6 channel (not digital). BIOS setup Jas 10.4.8 DVDv1 + ALC888
GA - 8VT880P Combo VIA PT880P Everything seems to work (LAN, USB, SATA *fix, IDE, Audio,USB working, use v 256.4.2* Yes JaS Update 10.4.8
GA - 945GM - S2 Intel 945 / ICH 7 installed via VMware, native install needs "-legacy" boot arg. everything works fine, DDR2 800 PC6400 is seen as "RAM 133Mhz"... Apple original security update (12/2006) works fine without patching. OnBoard audio fixed with ALC883 patch from here TubGirl AMD SSE3 test1 PPF2 DVD
GA - 865PE 1-st rev. Intel 865 Sound, USB without patching. SATA/RAID not tested. JaS 10.4.8 DVD on Semthex 8.8.1
GA - 8IPE 1000 - G rev.4.x Intel 865PE Intel SSE3 package.Sound working in stereo only (disable top performance in bios if the sound is intermitent), Ethernet working with DaemonES' drivers, USB + SATA fully working. Can also be patched with Jas 10.4.9 update JaS OS X 10.4.8 (AMD-Intel-SSE2-SSE3 with PPF1 & PPF2)
GA-8S661-FXM-775 rev.1.x SiS 661FX/964L Intel SSE3 package. Sound does not work, Ethernet does not work, USB works as 1.1, SATA is not recognized, PATA works but needs Bikedude's patched APPLEVIAATA.kext to get full speed. JaS OS X 10.4.8 (AMD-Intel-SSE2-SSE3 with PPF1 & PPF2)
P35-DS3R Intel P35 ICH9 driver not disponible, but able to use disks on it, JMicron patch works, sound ACL889B is not disponible at the moment. Ethernet RTL 8168/8111 works with modified kext and RTL1xxx driver but you need to enable Wake On Lan on bios or windows drivers. uphuck OS X 10.4.9
GA-8I865GME-775 Intel 865G Sound, USB, SATA worked out of the box. Lan needed to add VID/PID to AppleIntel8225x.kext. Using ATI9600Pro with Callisto008. Updated to 10.4.9 using JaS from same package and 10.4.10 from TPB. JaS OS X 10.4.8 (AMD-Intel-SSE2-SSE3 with PPF1 & PPF2)

[edit] Intel

Hardware Name (socket type) Chipset Notes Fully working without patching
mPGA478 845GL Intel Boxed D845GLVA motherboard with 1.8 Ghz Celeron CPU, Works: Video, ATA, USB, Doesn't work: Ethernet, Untested: Audio installed from JAS 10.4.8 DVD
D845WN D845WN???? Tested & Working: ATA, Built-in Ethernet, USB.
Untested: SATA, RAID, Firewire, Audio.Courtesy of RiPOFF
for SSE2 user (Kernel) > b9.zip = OSX86 v10.4.8 WORKING!!!
D975XBX 975X/ ICH7R Works: LAN, USB, FireWire, Audio is working by switching to the blue pin instead of the green 1 (with the SigmaTel 9221 AppleHDA Patch), SATA and ATA133 (with the Jas 10.4.8 patched ppf1 dvd), Raid not tested. JaS 10.4.8 DVD With PPF1 Patch
D975XBX2 975X Works: LAN, USB, FireWire, all 8 SATA-II ports with AHCI mode intel/marvell, SATA dvd drive nec7170s! Edit: Audio working with 10.4.9 update jas and AppleHDA Patcher 1.15.- Use this install DVD "jas 10.4.8 intel/AMD sse2/sse3 ppf1 + diskutil fix" Don't Forget to update your bios first!pako JaS 10.4.8 DVD
D865 PERLK 865PE / ICH5R Works smoothly. Works: ATA, Built-in Ethernet(Intel 82547), USB, Audio(Tested line out only), Firewire. Not tested: SATA, RAID JaS 10.4.6 DVD + Jas 10.4.8 Update(Included in Jas 10.4.8 DVD)
D865 GSA 865G Everything seems to works smoothly (Semthex Kern). Works: LAN(10.4.7 - Realtek8139), USB, Graphics(1280x1024 No QE/CI), Audio (10.4.7 - AC97) JaS 10.4.8 DVD reseed
D865 GSA 865G Apple 10.4.8 combo update + Mifki 8.8.1 kernel, added GeForce FX 5200 AGP and Titan.kext for QE and CI. Took several days to get the right mix but now it's totally stable and Mac-like. Have NOT tested: Audio-in, SATA. I would not recommend this board but for price. JaS 10.4.7 + Apple 10.4.8 Combo + Mifki 8.8.1 kernel + pion's package + Titan.kext (for addon GeForce 5200).
D865GBF 865G Worked out the box - Semthex 8.8.1 kernel - didnt test onboard graphics as I have an Nvidia FX5200 (which was detected and runs flawlessly with QE and CI). Works: dual core 3.4 Gb Prescott P4, Lan, USB, Audio In/Out, SATA and RAID. Not Tested : Onboard Graphics JaS 10.4.8 DVD reseed
D865GBF 865G Worked out the box - Semthex 8.8.1 kernel - Works: Northwood Celeron 2.0GHz, Lan, USB, Audio In/Out, Onboard Graphics (no QE/CI). Not Tested : S-ATA/RAID. JaS 10.4.8 DVD reseed
D865GBF 865G Works: Northwood Pentium 4 2.6C GHz (MMX,HT,SSE,SSE2), Lan (needs patching), USB (ipod: Working 2.0, Printer: Working 1.1), Audio In (Working good OOB AC97), Onboard Graphics (no QE/CI All Res.), SATA/IDE working. Not Tested : RAID. JaS 10.4.8 AMD INTEL SSE2 SSE3 beta 2 DVD
D915 GEV 915G Works: LAN, USB, Graphics, No work: Audio In/Out, Audio was working with 10.4.6 JaS 10.4.8 DVD reseed
D915PBL 915P JaS 10.4.8 sse3, everything worked out of the box except Audio. Uphuck 10.4.9 Worked with intel sse3 kernel. Works: Video (ATI x1600xt with DiaboliK's NatitX1600.kext installer) works perfectlly with QE/CI; Audio (Sound Blaster Live 24-bit External) Works in/out; I haven't tested Sata yet as I still have Vista on those. UpHuck 10.4.9 w/Intel sse3 kernel
DQ965GF Works: Sound with AppleHDA patcher, SATA with no other drives and set to AHPCI, USB, FireWire,OnBoard Video Not Work: LAN JaS 10.4.8 SSe3.SSe2.Intel.AMD DVD
DG965SS/DG965SSCK 965G NOT WORKING, keeps on saying "Still Waiting on Root Device", tried changing Bios, SATA, IDE, USB DVD ROM and much more but not working at all. Tested Tried to install from SATA DVD drive with AHCI enabled, tried to get it work in several different combinations and could not get passed the "Still Waiting on Root Device" problem. Happens on both DG965SS and DG965SSCK boards JaS 10.4.8 DVD
D925 XECV2 925XE Works: LAN, USB, Graphics, Audio, Firewire, SATA JaS 10.4.8 DVD reseed
D945 GNTLR 945G Works: LAN, USB, Graphics, Audio (Sigmatel 9223) JaS 10.4.8 DVD reseed
D945 GNTLKR 945G Works flawless: SATA2, HDA, QE & CI (on GMA950), Gbit Ethernet, USB2. Have checked "Sigmatel.9220 patch" in installer. "Line In" & "Audio Out" swapped. FireWire 400 is detected, but not tested, should work too. If some problems with USB, download "USB Debug Kit" from Apple and run a normal, non-log driver installer. JaS 10.4.8 DVD, mifki kernel
D946 GSZIS 945GZ install as normal, uncheck unnecessary drivers. Try setting the Bios "by default" sata and ata both working, usb working, audio Sigmatel 9227 not working with Taruga patch, built-in Ethernet works with install patch from here Video not work. Must have a pci expres graphics card. JaS 10.4.7 and 10.4.8 DVD.
D945 PVS 945P audio works , onboard network work, sata work, usb working mifki kernel
D945 GTP G945 Audio working (only line out and mic tested), usb working, onboard network no work, sata OK Yes JaS Update 10.4.8
D945GTPLKR G945 Everything works fine exept: 1) LAN works without fuzz when in Bios "boot to Network" is enabled 2) Sigmatel 9220 with no "line in" function (blue = line out, green = nothing, red = Mic) jas 10.4.8 dvd or 10.4.9 uphuck install dvd with Intel SSE3 Kernel, IOATAFamily Patch, ICH7-R Driver, Azalia Audio Driver
D101 GGC ATI x200 / SB450 Cannot install by booting of the DVD, you must install the packages over an existing Install, the only thing that doesnt work is LAN, I have not tested SATA. (I tried Jas 10.4.8 without success, only a X sign over the gray Apple at boot. D101GGC + Pentium D 805). Doesn't work with Jas 10.4.7 either, it don't recognize SATA, and it only show DVD-Rom.

if you set dvd as primary master and pata hdd as secondary master it works.disable serial and parralal ports make sure to disable legacy usb.works.(video 1024x768)

jas 10.4.8 dvd
DG965WH Installed using the jas 10.4.8 dvd. IDE devices do not work. Must be installed using either a SATA DVD drive or exrternal. Also in BIOS set SATA mode to ACHI. I have not been able to get the onboard networking or sound to work. When the installation routine starts if it says waiting for root device unplug the USB drive and then plug it back in. Works with both onboard and ATI x1800 card. Also disable both serial and parallel ports. JaS 10.4.8 SSe3.SSe2.Intel.AMD DVD
D945Gcl 945G Installed using the JAS 10.4.8 DVD. Almost everything, except graphics is working out of the box. Installed GMA950 patch, ajusted owner and user permissions - graphic works now with full CI/QE. CPU Core2Duo 2,66 GHz. S-ATA HDD works fine. Audio line-out only with Sigmatel patch from DVD, mic not tested. IDE works. Ethernet works. JaS 10.4.8 DVD
D945GCCR 945G Installed using the Tulip 10.4.9 DVD (samba need be fixed with MPIP103_10.4.9.SMB.CIFS.APF.FIX.dmg). Almost everything, except network that is not working (not found 82562G Chipset control kext). - graphic works now with full CI/QE on PCI Express nVidia 6200 with 128 mb onboard(onbord video not tested). CPU CoreDuo 3,2 GHz. S-ATA HDD works fine. Audio line-out only with patch from DVD, mic not run. IDE not tested. Ethernet using Realtek 8139c on PCI. Tulip 10.4.9 DVD
D945GCCR 945G Installed using the uphuck 10.4.9 DVD v1.3. Almost everything works, onboard network need to patch kext & sound is patch with Taruga AppleHDA patch v1.6here using ALC883 audio codec txt. Onboard graphic Intel GMA950 work fine with full CI/QE. uphuck 10.4.9 DVD v1.3
D945PLRN 945G Installed using the uphuck 10.4.9 DVD v1.3. Almost everything works, onboard network need to patch kext & can't get the sound to work at all. Using a Leadtek Winfast 256MB PX7300 PCI-E as graphic adaptor. uphuck 10.4.9 DVD v1.3

[edit] Iwill

Hardware Name (socket type) Chipset Notes Fully working without patching
DH800
(Socket 604 Xeon)
i875
6300ESB
dual Intel Xeon 3.0 GHz (Nocona). Native install. Both CPU's recognizedEverything works except AC97 audio. JaS 10.4.8

[edit] Mach Speed

Hardware Name
(socket type)
Chipset Notes Fully working without patching
MS945G-GLV
Socket 775
MicroATX
Intel 945G Everything but sound is working
has ALC655 sound (not working, not recognized at all)
Using SoundBlaster USB external Audio for now
Jas 10.4.8
KoolKal 10.4.9 Update
KoolKal 8.9.1 Kernel
[Realtek R1000 1.04 used for NIC]

[edit] MSI

Hardware Name (socket type) Chipset Notes Fully working without patching
915GM - FR Intel 915 / VIA 6 Needs 10.4.3 IONetworking kext, and AppleAudioAzalia kexts needs permissions repaired, and JaS Intel 900 GMA kext, Then everything works great JaS 10.4.8 DVD for Intel SSE3 (reseed)
945GM3 - F Intel 945G / ICH7 Needs 10.4.3 IONetworking kext or this , and AppleAudioAzalia kexts needs permissions repaired, and JaS Intel 950 GMA kext, Then everything works great JaS 10.4.8 DVD for Intel SSE3 (reseed)
945GM3 - F Intel 945G / ICH7 Needs azalia to fix audio, only two channels out on alc883, and rtl1xxx driver for ethernet, and JaS Intel 950 GMA kext, everything works really great 120 xbench with E4300 (ide sata2 dual core support) JaS 10.4.8 DVD for Intel SSE3
848 Intel 848 yes
649 NEO-V SIS 649 Sound not working, SIS Ethernet not working, USB working, AGR Port working, Poor performance because of unrecognized S-ATA and P-ATA Controller. Disk Read 2MB/s WRITE 1,8MB/s (XBench). JaS 10.4.8 DVD for Intel SSE3 (reseed)
865PE (478) Intel 865PE / ICH5 Jas 10.4.8 SSE2 / SSE3 / AMD Onboard NIC working with DaemonES Driver Analog Sound out working, spdif working in stereo
msi 945g neo & platinum (Socket 775) sata work lan work ide work usb work ps2 work sound need patch azila+alc882 intel gma 950 need patch after it works great (but on some boards Pentium D 8xx series CPUs work only in one-core mode, you must check this option in BIOS) with jas os x 10.4.8 and built in vga & sound patch all work straight out the box
msi pt8 neo-v(Socket 478) everything works but onboard lan. Can not locate working driver for onboard lan
MSI P965 Platinum Intel P965 No IDE Support, Sata functional (must set to IDE mode ** not enhanced ** ), Network works with realtek driver from intel, audio works with method for device id and vendor id. Jas 10.4.8 works without patching, needs driver fixes for network/audio
MSI P6N SLI-FI (LGA 755) North Bridge: nForce 650i (C55)

South Bridge: nForce 430i (MCP55)

Have only tried installing JaS 10.4.8 from IDE CDROM to IDE HDD. Works, install nforce4 ATA/SATA fix to get better HDD performance. booting with -v shows usb not able to get control from bios, but usb works. I use USB audio and Netgear GA311 so not sure if those onboards work. Needs nforce4 ATA/SATA fix for better HDD performance
MSI-7223 Intel i915/ICH6 Intel P4 3.2ghz Prescott, Everything works, except for onboard video (have not tested), OOB. Jas 10.4.8 Intel/AMD SSE2 SSE3

[edit] PC Chips

Hardware Name (socket type) Chipset Notes Fully working without patching
P23G V.3 (Socket 775 C2D) Via P4M800Pro, 8237R Native Install. Working IDE, SATA, Sound (Left Channel Only), USB, PS/2, Onboard Video S3 Unichrome (No QE/CI, Resolution 1024x768). I Guess. Jas 10.4.8 AMD Intel SSE2 SSE3 8.8.1 PPF 1 and 2

[edit] Phitronics

Hardware Name (socket type) Chipset Notes Fully working with path for AppleAC97.kext for sound, ViaRhine.kext for lan and vesa3.0 for graphics.
Pentium Celeron D 325 (Socket 775) Via P4M800, 8237 Native Install. Working IDE (MY DVD-RECORDER IS NOT RECORDING), SATA, Sound (Left Channel Only), USB, PS/2, Onboard Video S3 Unichrome (No QE/CI, Resolution 1024x768 (?video (F8 for the boot menu) for a list of complete set of possible resolutions). I Guess. Jas 10.4.8 AMD Intel SSE2 SSE3 8.8.1


[edit] Shuttle

Hardware Name (socket type) Chipset Notes Fully working without patching
SD39P2 (Socket 775) i975X Working: Everything (ALC888 limited to stereo output only at this time). See SD39P2 NIC/EHCI/ALC Patches: [9] Patching needed then all good. Jas 10.4.8 AMD Intel SSE2 SSE3 8.8.1 PPF 1 and 2
SG31G2/SG31G2B (Socket 775) G31 Working: Everything except onboard video GMA3100. Install a videocard first! Geforce 7600GT worked fine. Set sleep mode in Bios to S1 only (S3 wake fails). Choose automatic processor setup in Bios. Works with new 45nm Core2Duos E8x00.ALC888 works with ALC888.mpkg, but channels have to be combined into 1 device with Audio/Midi Setup for 7.1 sound. Network needs modification of AppleYukon.kext inside IONetworkingFamily.kext (replace 2 instances of 88E8053 with 88E8056 and replace 0x436211AB with 0x436411AB) Patching needed then all good. Jas 10.4.8 AMD Intel SSE2 SSE3 8.8.1 PPF 1 and 2

[edit] Tyan

Hardware Name (socket type) Chipset Notes Fully working without patching
Tempest i5000XT (s2696A2NRF) Dual Xeon - 2x Socket 771 Intel 5000X (Greencreek) MCH and ESB2 Native install. Working out of the box: IDE, SATA, LAN, PCIe, PCI-X, PCI, Firewire, USB, 2xIntel Xeon 5310 (2x4 cores, all recognized). Not working without patch: Audio ALC888. Extremely smooth and stable operation. This board is the one to go if you need maximum compatibility and Mac Pro performance. It is extremely similar to Mac Pro hardware. Jas 10.4.8 AMD Intel SSE2 SSE3 8.8.1

[edit] Processors

[edit] AMD

Model Notes Recognized as Full Work / No Patch
Athlon 64 4000+ (San Diego) Works Perfectly (OSX_1048_AMD_FINAL) 3.0 GHz Yes
AMD 3200+ XP (or any other Athlon XP) Installed OSX_1048_AMD.iso Panic ( Needs SSE2 ) NO
AMD Sempron 2500+ Socket 462 Installed OSX_1048_AMD.iso Panic (SSE2 not detected) NO
AMD Sempron 2600+ 64Bit Socket 754 (Palermo E3 OR E6 (I'm not sure)) Installed OSX_1048_AMD.iso Sempron 2600+ 1.6GHz,MMX,SSE,SSE2,SSE3 YES
AMD Sempron 2800+ 64Bit Socket 754 (Palermo E6) Installed JaS 10.4.8 AMD Intel SSE2 SSE3.Defiant diskutil fix.iso Sempron 2800+ 1.6GHz 256kb cache, MHz MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64 YES
AMD Sempron 3000+ (64) Socket 754 Installed JaS.10.4.8.AMD.INTEL.SSE2.SSE3 Sempron 3000+ 1.8GHz,MMX,SSE,SSE2,SSE3 YES
AMD Athlon64 3000+ Socket 939 Installed JaS.10.4.8.AMD.INTEL.SSE2.SSE3.PPF1.PPF2 Athlon64 3000+ 1.8GHz YES
AMD Sempron 3400+ Socket 754 Installed 10.4.8 with kernel 8.8.1 2000 MHz MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64 YES all work
AMD Sempron 3100+ Socket 754 without SEE3 Installed 10.4.8 + SEE2 + PPF1 YES all work
AMD Athlon 64 3000+ Socket 754 10.4.8 AMD Venice single core, 90nm, MMX, 3DNOW, SSE/2/3, x86-64 Fully supported out of the box, no tweaking.
AMD Athlon 64 3200+ Venice Venice single core, 90nm, MMX, 3DNOW, SSE2, SSE3, x86-64 AMD Athlon(tm) 64 Processor 3200+ Fully supported
AMD Athlon 64 3200+ (Orleans) Socket AM2 Works Perfectly, w/ JaS 10.4.8 SSE2/SSE3 Intel AMD install disc patched with JaS ppf1 + ppf2 2.01 GHz Athlon(tm) Yes
AMD Athlon 64 3500+ (SSE3) Works Great!, Sleep and restart works! 2.2 GHz AMD Athlon 64 (Correct!) YES
Athlon 64 3700+ San Diego (Socket 939) Used JaS 10.4.8 SSE2/SSE3 Intel AMD install disc patched with JaS ppf1. Works great AMD Athlon 64 3700+ 2.2 GHz Yes
Athlon 64 3800+ Venice Works Perfectly, SSE3 recognized, Sleep works along with Restart 2.4 GHz Athlon 64 (Correct) Yes
Athlon 64 4000+ Clawhammer Works great, SSE2 recognized, Restart and Shutdown work, Sleep not tested. 2.41 GHz AMD Athlon(tm) 64 (Correct) Yes
Athlon 64 X2 3800+ socket AM2 Works Perfectly, SSE3 recognized, 2 Core Recognized, Sleep, Restart - Using JaS 10.4.8 AMD SSE3 2.0 GHz Athlon 64 Yes
Athlon 64 X2 4600+ Toledo (Socket 939) Works Perfectly, SSE3 recognized,2 Core Recognized, Sleep, Restart 2.4 GHz Athlon 64 (Correct) Yes
Athlon 64 X2 4800+ Works Perfectly, SSE3 recognized,2 Core Recognized, Sleep, Restart 2.4 GHz Athlon 64 (Correct) Yes
Opteron 165 kernel_task at 100+% until overclocked 1.75Ghz Dual Core Opteron Yes
Opteron 165 kernel_task at 100+% until overclocked 1.75Ghz Dual Core Opteron Yes
Opteron 275 Works Fast 2.2Ghz Dual Core Opteron Yes
AMD Athlon 64 X2 5000+ Socket AM2+ Works well, SSE3. 2.6 GHz AMD Athlon(tm) 64 (correct!) Yes
AMD Athlon 64 X2 4200+ Socket AM2 Works Perfectly, w/ JaS 10.4.8 SSE2/SSE3 Intel AMD install disc patched with JaS ppf1, 2 Core Recognized 2.21 GHz Athlon(tm) 64 X2 (correct) 100% Go!
AMD Athlon 64 X2 4400+ Socket AM2 Works Perfectly, w/ JaS 10.4.8 SSE2/SSE3 Intel AMD 2.21 GHz Athlon(tm) 64 X2 (correct) Yes
AMD Athlon 64 X2 5200+ Socket AM2 Works Perfectly, w/ Jas 10.4.8 SSE2/SSE3 Intel AMD 2.6 Ghz Athlon(tm) 64 X2 5200 (correct) Yes absolutely
AMD Athlon 64 X2 6000+ AM2 works perfectly with JAS 10.4.8 3.0ghz Dual Core yes
AMD FX8300 Vishera 3.4 GHz Mac OSX 10.4.8 Amd Intel 3.4Ghz Yes.

[edit] Intel

Model Notes Recognized as Full Work / No Patch
Celeron D 347 (Cedar Mill) Used JaS 10.4.8 SSE2 SSE3 reseed w/Semtex 8.8.1, it worked right away but I set the -y flag for 133MHz bus and it seems to boot faster. It will try to sleep but reboots when I try to wake it, so I set to no sleep. CPU overclocks to 3.43GHz only 48C! 3.06GHz Intel Celeron D Processor Yes / Yes
Celeron SL6VU (Northwood) 2.40ghz/128kb/400mhz. Used JAS SSE2/3 and it works flawlessly, despite being so old... 2.39ghz Intel Celeron CPU Yes, straight out of box
Pentium 4 SL6DW (Northwood) 2.53ghz/512kb/533mhz. Used JAS SSE2/3, works ok, despite age Works fine - but there seems to be tearing present along the dock when magnification is on. This seems to be CPU dependant, as it does not do it with the SL6VU Celeron. Works 99%
Celeron D 315 Prescott Works absolutely flawlessly. JaS 10.4.6 -> Apple's 10.4.8, using Semthex 8.8.1 kernel. Everything works perfectly, it even goes to sleep! (Sadly this doesn't control the fans or the lights on my case, so there's no real point. It's still cool! 2.26GHz Unknown Yes! Strait out of the box!
Celeron D 331 10.4.8 Jas SSE2/3 2.66 GHz single core, MMX, NX, SSE/2/3, x86-64333333333 Fully supported out of the box
Celeron D346 Need to change FSB. Look here 4GHz Intel Celeron CPU Yes! SSE3, NX is OK
Pentium 4 630 Works perfectly OC'd to 3.24 GHz under JaS 10.4.8 3 GHz Pentium HT Processor Yes
Pentium D 805 Works perfectly OC'd to 3.0 GHz under JaS 10.4.8 Re-seed + latest semthex kernel 3,8 GHz Pentium D Processor Yes
Pentium D 820 Works perfectly with semthex patch beta8 Jas 10.4.8 2,79 GHz Intel Pentium D CPU YES,semthex patch
Pentium D 840 Works perfectly with JaS 10.4.8 3.20 GHz Dual Core Intel Pentium D CPU Yes
Pentium D 915 Works perfectly with Jas 10.4.8 sse2 sse3 semthex kernel 2.8 GHz Pentium D Processor Yes
Pentium D 925 Works perfectly with Jas 10.4.8 3,8 GHz Pentium D Processor YES
Pentium D 930 Works perfectly with Jas 10.4.8 Re-seed + semthex kernel beta8 3,0 GHz Pentium D Processor YES
Pentium D 945 Works perfectly with Jas 10.4.8 Re-seed + semthex kernel beta8 but doesn't show up in System Profiler 3,4 GHz Pentium D Processor YES
Pentium D 950 Works perfectly with Jas 10.4.8 Re-seed + semthex kernel beta9 3,4 GHz Pentium D Processor YES
Pentium M Dothan 725 1.6 GHz Work fine with JAS 10.4.8 + Semthex Kernel 1.6 GHz Unknown YES
Pentium 4 1.8GHz Works perfectly with Jas 10.4.8 + semthex kernel beta8 1.8 GHz Unknown YES
Pentium 4 2.4GHz Socket 478 (no Prescott, no HT) Works perfectly with Jas 10.4.8 + semthex kernel 8.8.1 2.3 GHz MMX, SSE, SSE2 YES / fully supported out of the box
Pentium 4 2.4GHz (Prescott, no HT) Works perfectly with Jas 10.4.7 + Apple 10.4.8 combo update + semthex kernel beta8 2.39 GHz Unknown YES
Pentium 4 2.8GHz (Prescott HT) Works flawlessly with JaS 10.4.8 2.81 GHz SSE2 SSE3 etc. YES
Pentium 4 (478) HT Works perfectly with upgrade 10.4.8 with Mifki kernel 2.99 GHz Pentium 4 Processor--CPU Features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH DS ACPI MMX FXSR SSE SSE2 SS HTT TM SSE3 MON DSCPL CID TPR YES
Pentium 4 (478) HT SL6WH This processor has no SSE3. Rosetta has some issues, but works nonetheless. Everything else works perfectly with JaS 10.4.8 AMD Intel SSE2 SSE3 2.59 GHz Unknown YES
Pentium 4 (524) HT Works out of box with Jas 10.4.8 + Semthex kernel 3.06 GHz Pentium 4 HT with SSE2, SSE3, EMT64 (in case a 64 bit version ever comes out) YES
Pentium 4 (775) HT 3 GHz Works perfectly with JaS 10.4.8 AMD Intel SSE2 SSE3 3.01 GHz. Yes
Intel® Pentium® Dual-Core E2160 (1.80GHz) 10.4.9 uphuck v1.3, kernel 8.9.1 - Both cores working, 100% trouble-free 1.80GHz Intel Core 2 Duo Yes
Intel® Core™2 Duo E6300 (1.86GHz) JaS 10.4.8 SSE2/SSE3 + ppf1, kernel 8.8.1 - Both cores working, 100% trouble-free 1.86GHz Intel Core 2 Duo Yes
Intel® Core™2 Duo E6400 (2.13GHz) JaS 10.4.8 SSE2/SSE3 + ppf1, kernel 8.8.1 - Both cores working, 100% trouble-free 2.13 GHz Intel Core 2 Duo (Bus Speed: 1066 MHz) Yes
Intel® Core™2 Duo E6420 (2.13GHz) Jas 10.4.8 SSE2/SSE3, KoolKal 10.4.9, KoolKal Kernel 8.9.1 - Both cores working, 100% trouble - free 2.13 Ghz intel Core 2 Due (Bus Speed: 1066 Mhz) Yes
Intel® Core™2 Duo E6600 (2.4 GHz) JaS 10.4.8 SSE2/SSE3 + ppf1, kernel 8.8.1 - Both cores working, 100% trouble-free Recognized as a dual core 2.4 Ghz Cpu Yes
Intel® Core™2 Duo Mobile T7200 (2GHz, 4MB L2 Cache, 667MHz FSB) JaS 10.4.8 SSE2/SSE3 + ppf1/ppf2, kernel 8.8.1 - Both cores working, 100% trouble-free (10.4.9 JaS update caused the processor to reset everytime you boot) 2.0 GHz Intel Core2Duo Yes
Intel® Core™2 Extreme processor QX6700 Installed 10.4.8 with Mifki kernel, rock solid.

10.4.9 recognizes it as: "2 x 2.67 GHz Intel Core 2 Due"

4GHz Genuine Intel® CPU Yes, all cores work but just not in Xbench
Intel® Core�Duo T2500 (2.0GHz) JaS 10.4.8 SSE2/SSE3 + ppf1, kernel 8.8.1 - Both cores working, 100% trouble-free 2.0 GHz Intel Core Duo Yes
Pentium 4 650 3,4GHz JaS 10.4.8, kernel 8.8.1 3.4 GHz Intel Pentium 4 Yes (mifki kernel, HT, NX, SSE3 & EMT64)
Intel Kentsfield Q6600 @ 2.4GHz, 8MB L2 Cache Jas 10.4.8 SSE2.SSE3 INTEL + AMD + PPF1 + Defiant + Bikerdude - 4 cores working fine. Core2 Duo, 2 CPUs, 4 Cores Yes
Intel® Core2�Duo E4300 (1.8GHz) JaS 10.4.8 SSE2/SSE3 + ppf1, kernel 8.8.1 - Both cores working, 100% trouble-free 1.8 GHz Intel Core2Duo Yes
Pentium 4 s478 3,0Ghz HT (revision E0) JaS 10.4.8 SSE2 SSE3 + PPF1 & PPF2 + Jas 10.4.9 Update 3 GHz Intel Pentium 4 CPU Yes
Pentium 4 630 3.0GHz HT JaS 10.4.8 SSE2 SSE3 8.8.1 kernel ASP says 3.45GHz Unknown. CHUD Tools says 3.45GHz Pentium 4 Yes
Intel® Xeon® E5310 (Quadcore - 4 x 1,6GHz) Works perfectly with JaS 10.4.8 AMD Intel SSE2 SSE3 8 x 1,6GHz Intel® Xeon® CPU (on a dual CPU system - all cores recognized correctly) Yes

[edit] Graphics Cards

Please specify if your card is AGP, PCI or PCI-E.
Also, place chip and board manufacturer in their respective column.

Note: For NVidia users, visit [10] for updated drivers. For NVIDIA CARDS PLEASE SPECIFY IF THE CARD DOES QE/CI. Saying the macvidia drivers work but not specifying QE or CI is a bit misleading. If you are using the new kernel then download the Titan kext from [11] to get QE/CI support

Note:These instructions may confuse newbies as they are a bit out of date. The MacVidia drivers do NOT support QE/CI AT ALL. You can use the kexts that come with your OSx86, or the ones from the 10.4.8 Intel update with your card. You may need to replace OpenGL.Framework too. Titan and Natit are merely enablers which make OSx86 think your VGA BIOS card is an EFI Firmware one (as on a real intel mac), and should load before the NVNVDA* kexts. An installer for Natit can be found at [12]. Check the forums for more info.

Note: For ATI users, visit [13] for experimental drivers.

Note: As of right now, all ATI cards with working kexts have severe slowdown issues with nForce3 chipsets. There is no fix for this, save getting editting out your card from the kext or using Quartz Debug to shut off Quartz Extreme. Edit: Just use agpgart to get no slowdowns at all on nForce3. Joblo10

[edit] PCI Express


[edit] ATi

Hardware Name,(VRAM) Chip-Manufacturer / Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
X1800GTO (256mb) Sapphire works with JaS 10.4.8 AMD-Intel-SSE2-SSE3 with PPF1 & PPF2.iso + JaS.10.4.9.Combo.Update.Intel.SSE3 DVI port works but I don't tested dual monitor. Yes Any Yes
X1800XL (256mb) Sapphire Works with JaS 10.4.8 and the 10.4.9 update. Requires the Natit driver patch. Have not tested DVI or dual monitor. This will not work in graphics mode until you apply the Natit patch. You can get console only until then. Yes Any Yes/Requires Natit Driver
X1600Pro (256MB GDR2) Sapphire All but sleep works in Desktop. Except OpenGL games!!! These crash the system within seconds. Saphire use newer VGA-bios then most reference cards. Yes Any Yes / ATIX1x00_3.5 and NATIT
X1600Pro (512mb) Sapphire Works with x1000 support package from Jas 10.4.8 SSE2/SSE3 DVD, but it shows vertical lines and is highly unstable in my setup (nforce4, athlon x2 4200) Yes Any Yes / No
X1600Pro (256MB GDR2) Peak Works great. No crashes on OpenGL Games! Resolution changes, rotation, QE, QE2D & CI all work. Sleep not tested. Yes Any Yes / ATIX1x00_3.5 and NATIT
ATI Radeon X1650 (256MB) Sapphire natit and blackb id: 0x71C7 Yes Any Yes / natit and blackb
X1800XT (512mb) Sapphire Works perfect with x1000 support package from Tubgirl AMD 10.4.8 ISO(nforce4, athlon AMD64 Venice 3200+, 2GB OCZ DDR400) Yes Any Yes / No
X1600Pro IceQ(256MB) HIS Excalibur FULLY working card after using Borisbadenov Patch. QE/CI, DVI, SLEEP, ROTATE etc. All working smoothly. Yes Any Yes with Neopheus 3.5 Borisbad installer
X1800GTO (256MB) ATI/GeCube FULLY working with Natit Patch. QE/CI, OpenGL, DVI, ROTATE, Dual Monitor. All working smoothly. also work with ATIX1xxx Installer Yes Any No, Natit or ATIX1xxx Installer
HIS x1900XT (256MB) ATI/HIS FULLY working with JCCOOL x19xx driver. QE/CI, OpenGL, DVI and analog, ROTATE, Dual Monitor. All working 100%. Games are fast - well over 100 FPS. Yes Any Yes using JCCOOL x19xx Installer
Gigabyte X1650 Pro SILENTPIPE II, PCIe, 256MB, 2xDVI, TV-OUT ATI Only one DVI works, the other one works with DVI to VGA adapter. Yes ANY Yes
Radeon X1600 Pro 256MB (Device ID 0x71C2) MSI Microstar Inc. FULLY working card after using Borisbadenov Patch. QE/CI, DVI, SLEEP, ROTATE etc. All working smoothly. Yes Any Yes with Neopheus 3.5 Borisbad installer
Sapphire X1950XT 256MB ATi/Sapphire QE/CI/Rotation working. See Jccool Method Yes Any res your monitor can do with dual dvi No, Jccool Method
Sapphire X1950pro 256MB ATi/Sapphire Resolution only, no QE/CI...(26-06-07) :( ko any No/Jccool method
HSI X1900GT 256MB ATi/HSI QE/CI/Rotation working. See Jccool Method Do what Tek suggests too. Yes any No/Jccool method
MSI X1950XTX 512MB ATi/MSI QE/CI/Rotation working Yes Any res titan (more to come)
Radeon X1600pro 256 MB (Device ID 0x71C2) Powercolor Works using Neopheus 3.5 Borisbad installer. No Energy Saver functions. Yes Any Yes with Borisbad 3.5
Radeon X1600pro 256 MB (Device ID 0x71C2) Powercolor Works using Neopheus 3.5 Borisbad installer. No Energy Saver functions. Yes Any Yes with Borisbad 3.5
Radeon X1600XT 256MB dual DVI-D PowerColor Borisbadenov's Method v. 3.6 yields the ability to change resolutions, but it does not enable QE/CI or rotation support under this kernel. After determining that QE/CI were unsupported, I did not further test the card. Yes Any No
Radeon X1600 Pro 256 Mb Silent-Pipe II (GV-RX16P256DE-RH) Gigabyte Works using Neopheus patch bundled in 10.4.8 JaS release. QE/CI, DVI work. (incompatible with gigabyte GA-965P-DQ6 mobo) Yes Any Yes with Borisbad 3.5
Radeon X1650 Pro SILENTPIPE II, PCIe, 256MB, 2xDVI, TV-OUT Gigabyte Only one DVI works, the other one works with DVI to VGA adapter. Can mirror desktop but not extend. Yes ANY Yes
Radeon X850XT (Device ID 0x5D52) Sapphire Use this with Callisto b005 (and above.) Tested - AMD 10.4.8 SSE3 Fully supported (Including widescreen). No, Callisto 005 & Koverg patch (may work, but tested with manually editing hex)[Koverg Patch tested and works.]
Radeon x1300 Pro ATI VESA 3. QE. CI Enabled after install. For resolution change, you need to download - BorisBadenov/NeoPheus 3.6 Yes Any Yes
ATI Radeon X600 256mb ATI Using JaS 10.4.8 DVD works 1024x768 only out of box. Can get full resolution/refresh rate control panel with Callisto drivers, but must edit ATIRadeon9700GA.plugin (replace IONDRVFramebuffer by CallistoFB) to get QE/CI working. Yes ANY (tested with 1680x1050, and some 5 others on DIV port) Titan works, Natit not tested.
ATI Radeon x1300 (GV-RX13128D-RH) ATI/Gigabyte VESA 3. QE,CI works without patching or something else. DVI works perfect. (JaS 10.4.8 AMD Intel SSE2-SSE3+ppf1.iso) Yes not tested No patch needed
ATI Radeon X1300 Pro - 256MB (id: 0x7183) ATI/Sapphire Resolution Change works with Natit. QE/CI doesn't work, no matter what. If you try adding the device id to your info.plist to get QE/CI, it will result in a kernel panic. No known solution at this time (JaS 10.4.8 AMD Intel SSE2.SSE3+ppf1.iso). Same card with device id 0x7142 is known to work without problems, use Diabolik's X1300 installer. Yes not tested No QE/CI. Res-change works.
ATI Radeon X800 (256MB) ID 0x554f ATI/MSI Able to get full resolution support with Callisto. QE/CI working with ATIRadeon9700.kext from 10.4.4, but some artifacts in rendering. Works fine on VGA, but kernel panics with DVI. Yes Any Yes/Need Callisto
ATI Radeon X300 (128MB) ATI Tearing of graphics now and then. JaS 10.4.8 used. Yes 1024x768 (Resolution changable via bootoption "Graphics Mode"="1280x1024x32". Or hardcode it in com.apple.Boot.plist in /Library/Preferences/SystemConfiguration/). Yes/No
ATI Radeon X700 Mobility (128MB) DevID 5653 ATI Mousetearing. JaS 10.4.8 used. [14] Somewhere round page 6 is the patch, made by ovof! Yes Up to 1280x800 on my Laptop. Yes/No
ATI Radeon X1300 Mobility (128MB) ID 0x7149 ATI Mouse tearing. To Enable QE/CI, add ID for IOPCIMatch key in /System/Library/Extentions/ATIRadeonX1000.kext/Contents/Info.plist. Tested on Dell Inspiron 6400/E1505. Yes Locked to 1024x768 Yes
Diamond Radeon X1650Pro (256MB DDR2) ID 0x71C6 Diamond *If installing Jax 10.4.8 & Titan, card will show up as X1600 w/ CI/QE. However, has screen artifacts and will crash when menu elements pushed too fast.
  • Tried Natit X1600 drivers, which supposedly now supports X1650, but CI/QE NOT enabled. Stable, though
  • Tried Modbin's X1650AGP.pkg installer, designed for my device ID (others claimed it worked w/ PCI-e), but no CI/QE. Stable, though.
  • Tested on ECS NforceA-939 MB V1.0
No Tested 1024x768 only, DVI>VGA dongle No
Sapphire Radeon x850xt 256MB ID 0x5d52 Sapphire *Using Jas 10.4.8 INTEL/AMD SSE2 SSE3, using the sticky in the graphics cards forum for x800, it works great.
  • Requires the use of Callisto modifying kexts. It does have the usual mouse tearing, so I used the mouselocator program.
  • Search for mouselocator and you'll find the topic with everything you need.
  • On my system, when turning on from a cold boot, the apple boot screen will freeze. Do not worry! Just hit the reset button and it'll boot right into os x. That is my ONLY complaint.
Yes Any. Have not tested with widescreen. DVI doesn't work! Just use VGA or an adapter of some sort. No. Requires the x800 method found in the Graphics Cards section in the forum.

[edit] Intel

Hardware Name,(VRAM) Chip-Manufacturer / Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
Intel 82865G Intel No color..low res (640x480) Neither 640x480 No/No
Intel 82865G Intel Works, set 8MB buffer in Bios Neither 1024x768; works at any resolution when set manually in darwin boot Full Work / No Patch
Intel I915 Intel Works Both from 640x480 to 1650x1050 Works out of the box
Intel 915GM Intel Works QE / CI, No Work Work on 1280x800 if update from 10.4.6 JaS QE / CI, No Work
Intel 915GL Intel Native OpenGL apps work fine. PPC OpenGL apps crash, but other PPC apps work fine. Yes Many No
Intel GMA950 Intel Native OpenGL apps work fine. Quartz Extreme work fine. (Rotation , Quartz 2d) Yes Out of the Box Yes, works out of the box with Intel JaS 10.4.8
Intel GMA X3000 Intel NOT WORK (at leas with jas.10.4.8) NOT WORK (at leas with jas.10.4.8) NOT WORK (at leas with jas.10.4.8) ?
Intel GMA X3100 Intel Works (on my Sony VAIO VGN-CR19XN) No 1024x768 Yes, works out of the box but no QE/CI

[edit] Matrox

Hardware Name,(VRAM) Chip-Manufacturer / Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
TripleHead2Go Matrox JaS 10.4.8 DVD reseed + titan.kext Both Yes 640x170 / 3840x1024 Yes / Req Titan.kext

[edit] NVidia

Prelude: There are a substantial amount of reports on the forums indicating the 7300 does not work as well as reported below. Remember, everything submitted below are based on information from the author who submitted it, please check the forums for additional information.

Hardware Name,(VRAM) Chip-Manufacturer / Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
NX8800GT 512MB MSI Works out of the box, but needs patching, for memory fix and higher resolutions. Recognized as 32mb Nvidia Card ? Only tested 1024x768 No/No
8800GTS 640MB eVGA Vesa 3.0.. Neither All 4:3 from 640x480 to 1280x1024 No/No
8800GTS 640MB XFX No Driver, not working. Regonized as 32MB Nvidia Video card in Mac No/No 1024X768 No drivers, stuck at panic screen
8800GTS 320MB EVGA No Driver, not working. Regonized as 32MB Nvidia Video card in Mac No/No 1024X768 No
8600GT, 256MB Twintech Darwin dectect a VESA 3.0 video card, with 14 MB video RAM .. No/ No Not working ... No / No
7950GT OC (512MB) BFG Did the Gotoh bios mod (as introduced on the 7900s earlier) and run NVinject as opposed to Titan/Natit/NVidiaEFI.
Bios: [15]
NVInject: [16]
Yes/Yes All Yes/Needs VGA-Bios-Mod and any EFI patch (Natit/Titan/NVidiaEFI/NVinject)
7950GT (256MB) EVGA Works after editing Natit, GeForce, NVDANV40Hal, and NVDAResman kexts with <string>0x029510de</string> Yes / Yes All Yes / Natit and edited kexts
7900GT (TOP) (256MB) ASUS Works out-of-the-box with jas 10.4.8 SSE2 SSE3 with ppf1 ppf2 dvd. Only select NV40 in jas 10.4.8 dvd setup. Yes/Yes All Yes (Jas 10.4.8)
7900GT (512MB) XpertVision Works fantastic with JaS 10.4.8 + Natit 1.0 after modifing the VGA-Bios like in this thread. You above with your 7600GS 512MB, give the Bios-Mod a try! I flashed all from Windows with NVFLASH 4win, is really pretty easy... Yes/Yes All perfect Yes/Needs VGA-Bios-Mod
7900GT KO eVGA Works using MacOSX 10.4.8DVD AMD SSE3 TEST 1. DVI with full QE/CI and resolution change. Use Titan NV40.kext option during install. Yes All resolutions Yes
7900GT (256MB) XFX Uses JaS 10.4.8 install DVD with Titan patches, works perfectly. CI & QE, all resolutions. Yes/Yes All Yes (Jas 10.4.8)
7900GS (TOP) (256MB) Asus Works out-of-the-box with jas 10.4.8 dvd without flashing. Only select NV40 in jas 10.4.8 dvd setup. If you want a dual monitor too, switch to natit dual v0.02 and it too works flawlessly (use identical monitor for no problems) (also works great in 10.4.9 and 10.4.10 :)) Yes/Yes All Titan for single display or Natit Dual v0.02 for dual display.
7900 GS 256MB (PCI-e) BFG Everything works perfectly Both All Yes/Titan
7900GS PixelView Works using Titan. DVI with full QE/CI and resolution change. Yes All resolutions Titan
7900GS Leadtech/ Winfast Works using Natit 1.0, Natit dual v0.02 (screen spanning works) and Titan. Both DVI works with full QE/CI and resolution change. Yes All resolutions Natit Universal 1.0, dual 0.02 and titan
7900 GTO 512 MB MSI The ROM of this card must be flashed with the proper memory address locations in order for the Darwin bootloader to detect the full 512 MB. See this thread for details. Yes All YES/Once the card is flashed and either Titan or Natit is used
7900GS 512MB PCIe XpertVision Works after modding the card's ROM. Both All resolutions Natit. - Titan not tested.
7800GT, 256MB Point of View Used Titan driver on JaS 10.4.8 DVD. Dual Screen worked too. Yes / Yes All Good Yes / Titan on JaS 10.4.8 DVD
7800GT, 256MB eVGA Used Titan driver on JaS 10.4.8 DVD. Both outputs functional with DVI to VGA adapter Yes / Yes VGA tested to 2048x1536, DVI not yet tested, will update when tested with 24" LCD Yes / Titan on JaS 10.4.8 DVD, no other mods
7800GT nVidia/Gigabyte Works perfectly QE/CI Any Natit
7800GTX 256MB ASUS Used the Natit 1.0 Installer from here Both ALL Yes/Requires NV40 thing or the Natit 1.0 or higher Installer
7800GTX 256MB BFG Using the NV40 thing that came in the installer Both ALL Yes/Requires NV40 thing
7800GTX(256Mb) Leadtech DVI Works like a champ at 1280x1024@75Hz. Thats the highest this monitor will go Yes All resolutions Titan 04/11
7600 GT(256Mb) Manli Captiva Works using Titan Kext. DVI works full QE/CI Yes Any Borisb installer for Nvidia (Titan) 10.4.8
7600 GT MSI Works using Titan. DVI with full QE/CI and resolution change. Yes All resolutions Titan
7600 GS (256MB) MSI NX7600GS-T2D256EH Works using fine with Diabolik Natit 02.DVI with full QE/CI and resolution change. Yes All resolutions Yes/Natit
7600 GS (512MB) ASUS EN7600GS Passive Replaced a XFX7600GT installed with JAS 10.4.8 with this Asus EN7600GS. Followed this ROM edit procedure. No aditional .kext editing was needed. Card was perfectly detected by JAS 10.4.8 NV40 Titan install made for the XFX 7600GT256. QE/CI work, 512Mb detected. Yes All resolutions Yes/Titan
7600 GT Gigabyte Works using Titan. DVI with full QE/CI and resolution change. Yes All resolutions Titan
7600GT 256MB XpertVision Works in normal mode when following instructions in QI/CE Feild. Yes, you have to put your Device Id's into NVDAresman.kext, GeForce.kext, IONDRVsupport.kext and NV40Hal.kext ALL No/Natit, titan untested.
7600GT-OC, 256MB BFG Used Natit driver on JaS 10.4.8 DVD. Yes/ Yes All Good Yes / Natit
7600GT, 256MB Nvidia / XFX PVT73GUGD3 Used Diabolik's XFX 7600 installer (based on Natit dual kext). Great card! Very fast in Quake 4, Prey, etc. Yes / Yes All Good Yes / No
7600GT, 256MB Sparcle SF-PX76GDH Cool-pipe/SF-PX76GDH. Titan from JaS DVD 10.4.8 use NV40 patch, all works Yes / Yes All Good Yes / No
7600GS (512mb) Point of View Neither Titan, or Nanit worked, I tested every possible configuration and the results varied between black screens and the multilanguage "please reboot" screen. I believe the problem is due to only 256mb being detected. I read somewhere 512mb cards should be reflashed with a patched bios in order to get them running. No No No / No
7600 GS (256MB) Manli JaS 10.4.7 DVD + Apple 10.4.8 update + natit.kext Both All(monitor max. 1680x1050) natit
7600GT, 256Mb XFX Beautiful! All resolutions, dual display (2 CRT monitors with DVI to VGA adapters), ROTATION! 10.4.9 Diabolik installer, Natit dual v0.01. Thanks all people involved, I'm really happy. Yes/Yes All Yes! No dual CRT Monitors using Natit dual v0.02, only v0.01 works.
7600 GS (256MB) NVidia/Gigabyte Used JaS 10.4.8 DVD+titan.kext (Device ID 0x0392) QE and CI from 640x480 to 1440x900 Yes, only installed titan
7600 GT PCI-E(256Mb) Gigabyte [Silent-pipe version] VGA works fine with Dell 2007wfp, DVI fails with blinking/res change error, needs correct EDID I think Yes All resolutions Titan 04/11
7600GT 256MB XFX Works with Darwin 8.8.1 kernel (Semthex), Apple's NVIDIA kexts and omni's Titan kext. QE/Q2DE/CI supported. Yes Any all the way upto and including 2560x1600 titan 11-02
7600GS 256mb XFX Using Titan 1.0 Both ALL Yes/No
EN7300GS(256) ASUS Using Nanit Both ALL Yes/No
7300 GT (256MB) ASUS Works using Titan Kext or Natit. Both VGA and DVI. Full QE/CI Yes Any titan 11-01 or Natit 1.0.
7300 GT (512MB) Geforce XFX Works, Both DVI displays, with Diabolick & Natit V2. However, must flash ROM with fixed image. Don't be scared, easy to do with some care and research. Both upto 1280x1024 on current setup, also w/ screen rotation. NO/NO -Must flash ROM with fixed image. See MACVIDIA Website, look for the 512mb Disscusion, search "7300" and find the fixed image there. Follow their instructions.
7300LE/HTD/128M ASUS Works, both displays with natit dual 0.2. (HD)TV out (s-video) not tested yet [17] Yes/Yes All (My LCD 1024x768 native) Yes/With natit dual
7300LE 64Bit(128MB) NETGATE (Brasil) Using JaS 10.4.8 AMD SSE3 Test 1, latest semthex kernel, Titan.kext (for AMD 10.4.8, needs DEVid edit on Info.Plist[README.TXT on Titan]) enables CI/QE. TV-Out don't work, DVI not tested (yet!), Very usable, but not so fast due card low performance, works great! Resolutions/Colors/Frequency are all configurable via System Preferences! Yes tested only with 1024x768x32@60 and 1280x1024x32@60 Titan works, Natit not tested.
7300GT 256MB PCIe PNY Technologies Everything pretty much works perfectly out-of-the-box.
  • Using Mac OS X 10 4 8 - JaS AMD Intel SSE2 SSE3 incl PPF1 (Semthex 8.8.1) w/Titan.kext included
  • Resolutions and Frequency are all adjustable in System Preferences
  • DVI connector 2nd Display shows up in System Profile but not tested
  • TV-Out not tested
Full QE/CI Support All resolutions Titan 100%, Natit not tested.
7300 LE (256MB) Sparkle Works using Natit Dual, VGA, S-Video & DVI Now Works w/ Natit Dual v0.2, Full QE/CI See

InsanelyMac thread

Yes Any Natit Dual v0.2
7300 LE (256MB) MSI Works using MacOSX 10.4.8DVD AMD SSE3 TEST 1. DVI with full QE/CI and resolution change. Use Titan NV40.kext option during install Yes Any Titan
7300 GS PCI-E 256Mb PNY Works using Titan and Natit Kext. VGA works full QE/CI. DVI not tested, though it should work. Yes Any 10.4.8 Real w/Titan 11-04
7300GS 128mb Chaintech Working properly using titan.kext! Natit.kext causes screen flip. Both All Yes, Req, Titan.kext
7300LE 128mb Gigabyte Works Perefectly using JaS FINAL 10.4.9 (TV-OUT, Quartz Extreme Everything perfectly!!!) Both All Yes
7300GTS(256) ASUS Using Natit 1.0 Both ALL Yes/No
7100GS512, 128MB nVidia 7100GS / ASUS Used Titan driver on JaS 10.4.8 DVD. Only VGA output tested (DVI works for me) Yes / Yes All Good Yes / Titan on JaS 10.4.8 DVD
6800GT ASUS Works using MacOSX 10.4.8DVD AMD SSE3 TEST 1. DVI with full QE/CI and resolution change. Yes All resolutions Yes
6800 Ultra 256mb XFX Works using "JaS.10.4.8.AMD.Intel.SSe2.SSe3.v1p ppf" DVD. DVI with full QE/CI and resolution change. If the screen goes black when booting just switch the monitor from one DVI port to the other. Yes All resolutions Titan
GeForce 6600

256 Mb/128 Bit

Albatron JaS 10.4.8 DVD Yes All resolutions Natit
6600 128MB ASUS Works using Natit. DVI with full QE/CI and resolution change. Monitor sleeps (approx 20sec analog, several min DVI) when going into GUI. Both ALL Yes/Natit
6600GT 128MB Club3d Add dev id to Geforce, nvdanv40hal and nvdaresman kexts. Use Natit_dual and all works. Both ALL Yes/add dev ids
6600 256 MB XFX Works using Titan Kext. DVI works full QE/CI Yes Any titan 11-01
6600GT 128MB Dual DVI PNY Works perfectly using Titan Kext. DVI works full QE/CI Yes, Full QE/CI Any titan 11-01
6200 TurboCache XFX/Inno3d/AOpen Works using Titan Kext or Natit Installer 1.0. DVI works and QE & CI. No screen artifacts! Works perfectly Yes Any Install Natit! Done!
6200LE (64MB Onboard) MSI Using JaS 10.4.8, latest semthex kernel. QE/CI work with Titan or Natit. Dual displays DO NOT work, only VGA port works. Yes Any Titan and Natit both work
6500 (256MB) Nvidia Using 10.4.8, latest semthex kernel, Titan.kext enables CI/QE. Everything working! Yes Any Titan works, Natit installer produces black screen
6200TC Gigabyte Works, Installed using JaS 10.4.8 SSE2/SSE3 DVD Yes/Yes All (My LCD 1024x768 native) Yes/With natit dual
Quadro FX 3500 (256MB) Nvidia Using 10.4.8, latest semthex s4 kernel, Titan.kext enables CI/QE. Everything working! Yes Any Titan works, Natit not tested.
Quadro FX 1400 Go(256MB) Nvidia Using 10.4.8, latest semthex s4 kernel, Titan.kext enables CI/QE. Everything working! Yes Any Titan works, Natit not tested.
NVIDIA Quadro FX540 128 MB NVIDIA Works using Titan Kext. VGA works DVI not tested. Full QE/CI/OpenGL Yes Any titan 11-02
NVIDIA Winfast PX7300GS TDH 256MB Leadtek Works using natit Kext. VGA works DVI not tested. Full QE/CI/OpenGL Yes Any Install Natit! Done!

Additional Information: There are a substantial amount of reports on the forums indicating the 7300 does not work as well as reported above. Remember, everything submitted above are per-user, please check the forums for additional information.

re-organized by Adam_the_1st, please keep it that way

[edit] AGP

[edit] Matrox

Hardware Name,(VRAM) Chip-Manufacturer / Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
G450 AGP Matrox JaS 10.4.8 native install from scratch no 1024*768 is the only resolution I I can get. no (work at 1024 * 768 , that is all.


[edit] ATi

Hardware Name,(VRAM) Chip-Manufacturer / Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
ATI 9800XT (128MB) ATI Had to add device ID to ATIRADEON9700.kext Later used Callisto 008 for res switching, follow callisto faq

to get res switching and QE CI. Plus installed QuartzSimple to enable Quartz2DExtreme

YES / YES Any YES
Ati Mobility 9700 64MB Notebook Using Callisto driver 03 fixed - adjusted with vendor ID No 1280x800 Without hardware acceleration
ATI Mobility M6 , ID 0x4c59 (16MB) ATI To Enable QE/OpenGL, need to delete the original ATI kexts and OpenGL Framework, get Radeon7500Pack, extract files with Pacifist, overwrite original Callisto Drivers with files from version b006, add AGP bus and device IDs, then move all kexts/frameworks into right place and reboot Yes / No Tested 1024x768 and 800x600 Yes / See notes
Radeon X1300 (512MB) GeCube Works with both DVI and VGA, no patch needed YES / YES Any, but problems with 1080i with VGA may occur YES
Radeon X1600 (256MB) Sapphire Works using borisbad installer. No Energy Saver functions. However, if you use a VGA>DVI adapter, display may go to sleep. (Device ID 0x71C2) Yes plus Q2D capable (gives a speed boost on Finder) Any No
Radeoon X1600Pro (512MB AGP) PowerColor Stable in Jas 10.4.8 (Install with no patches). However, no QE nor CI support. Can be patched using Kookal's update selecting only the ATI AGP support option, this patch allows the changing of resolutions and removes mouse tearing artifact but does not add QE or CI support(patching with Kernel update or Apple Combined update options in Koolkal can cause system to be unusable). No methods of patching have yet been successful in enabling QE and CI support (most methods caused the system unusuable). PCI-ID 0x71CD1002. No known method that successfully adds hardware acceleration. Full resolution change possible with Koolkal patch (selecting the ATI Radeon AGP Support option) No
Radeon X1600pro (256MB) Sapphire Works out of the box with JaS 10.4.8 AMD Intel SSE2 SSE3.Defiant diskutil fix.iso. No Energy Saver functions. No DVI output. Fast OpenGL but slow Finder perforpance. Detected my LCD monitor with all capable resolutions. Yes / Yes Any Yes
Radeon X1600 (512MB) ICE-Q HIS 10.4.8 with borisbad AGP-ATI Addon during the installation (Device ID 0x71C2) Both Only 1024x768 with some Artefacts :-( No
Radeon X800Pro (256MB) ATI Callisto 008beta with 10.4.8 DVD Disk (Device ID 0x4a49) Both from 640x480 to 1650x1050 Yes
Radeon X800XL (256MB) ATI, Gigabyte Jas 10.4.8, No HW Acc. No QE/CI, Achieved 1600x1200 with Manual Boot Fix, Device ID 0x554d No 1024x768, 1600x1200 No
Radeon 9800 Pro (128MB) ATI Callisto 008beta with JAS 10.4.8 Intel SSE2 Patch. DVI OK. Mouse tearing partially elimiated with Mouse Locator. Tested OpenGL with WoW, performace is soso, after return to desktop the cursor flickers and had to reboot. Both Any (Using 1280x1024 on 17" LCD) No
Sapphire Radeon 9800 Pro AGP (128MB) ATI JaS 10.4.8 AMD, Callisto b_008, edited ATIRadeon9700GA.plugin, AGPGart 2.1 and Quartzsimple. DVI ok. Performance FCP5/Motion &c OK Both Any (up to 1920x1200 on two 24" Samsung) YES
Sapphire Radeon X 1950 Pro AGP (512 MB) ATI Jas 10.4.8 AGPGart 2.1 driverpackage Tiger_7280_7288 from Bronya plus ATI Displays 4.5.9 (ATI-AMD). Fully working QE/CI/OpenGL/Rotation on dual display (extended desktop). Perf. OK Yes/Yes Any Yes
Radeon 9800 (128MB) ATI works natively on jas intel/amd patched 10.4.8. Both Any No
Radeon 9600 Pro (256MB) ATI, PowerColor(Kurouto-Shikou released in Japan) JaS 10.4.6 DVD + Jas 10.4.8 Update(Included in Jas 10.4.8 DVD). QE / CI enabled by Callisto. This is already included in Jas 10.4.8 Update. Modify the ATIRadeon9700GA.plugin using the methods described in the Callisto package. Mouse tearing can be decreased with MouseLocator. Both Any By AGPGart.kext(1.1beta needs modify) recognized as AGP Card
Radeon 9600 Pro (256MB) Build by ATI Mac-edition (200 �on *acway !) JaS 10.4.4 DVD patched 10.4.7 + Update 10.4.8 No/No Any NOT WORKING !! [Native/Titan/Natit]
Radeon 9600 XT (256MB) Sapphire Tubgirl 10.4.8 AMD FINAL Yes/Yes 1024x768x32 Yes, except for resolution switching (fix with Callisto?), and mouse tearing. Not recognized as AGP either (fix with AGPGart?).
Radeon 9800 (256MB) ATI works on jas intel/amd patched 10.4.8. id 4e48 china QE / CI enabled by jas intel only .Mouse tearing can be decreased with mightymouse & AntiTear2

but read it as pci card shake works prefect but final cut dosent work because there is no agp AGPGart dosent work till now

1024*768*32 bit only
Radeon 9600 Pro EZ (128MB) ATI by PowerColor Jas 10.4.8, QE/CI with Callisto008 file and follow directions in FAQ, Achieved 1900x1200, Device ID 0x4150 Vendor ID 1002 Yes 800x600 to 1900x1200 No
Radeon 9550 (256 MB) ATI Jas 10.4.8, QE/CI with kext edit. device ID = 0x4153, mouse tearing Yes Any with bootlist edit No (kext edit required with mouse tearing)
HIS X 1600 Pro IceQ (256 MB) ATI Jas 10.4.8, use ATI X16XX patch Yes/Yes Any Yes/Yes

[edit] NVidia

Hardware Name,(VRAM) Chip-Manufacturer / Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
GeForce 5200 FX 128 Mb Palit Install NATIT.kext QE/CI works all resolutions Works fully with natit
GeForce 6200 PNY Works using Natit. All resolutions. QE/CI works All resolutions Natit Installer
GeForce Ti 4200 Leadtek Works using Natit. All resolutions. Still recognised as PCI card however. QE works All resolutions Semthex kernel, Natit kext and edited NVDAResman.kext, GeForce.kext and NVDANV40Hal.kext (mandatory) with device/vendor id
GeForce4 MX 420 Dell Didn't work with Natit. Works using NVidia/NVDriver/AGPGart kexts & 0x017210de NO All
GeForce 5500 256MB Albatron Works with Titan patch, JaS 10.4.8 Both All resolutions Yes/No
Geforce 7100GS Used Natit with device id in needed scripts Yes,Yes DVI works with custom resolution settings and S-video work
GeForce4 Ti 4800SE 128mb AGP MSI Ti4800SE-TD8X Added DEV ID to Geforce.kext, added natit, it loads NvidaNV20HAL. Later added AGPGart which lowered cpu usage substantially CI & OpenGL, no QE Dual monitor, all res. Natit/AGPGart
Geforce 5200 (128MB) XFX/Inno3d Works using /Titan Kext / Natit Installer 1.0/ natit dual 0.02/ DVI works and QE & CI. no screen artifacts! (Device ID 0x0322) Yes, both Any No
GeForce FX 5200 Unbranded (DeviceID = 0x0322) Works using Titan. All resolutions, widescreen, CI/QE/GL. Yes All resolutions Titan
GeForce FX 5200 eVGA 128MB Single VGA Output. Works using Titan. All resolutions, CI/QE/GL, correctly detects my Viewsonic a95f. Yes All resolutions Titan
GeForce FX 5200 (128MB) COMPUSA Works using Natit. All resolutions, CI/QE VGA-DVI-TV OUT. Yes All resolutions Semthex kernel, New DVD no patch
GeForce FX 5500 Unbranded Works using Titan. All resolutions, widescreen, CI/QE/GL. Yes All resolutions Titan
GeForce FX 5500 (128MB) Inno3D Works using Titan. All resolutions, Ran at 1400*900, widescreen, CI/QE/GL. Yes All resolutions Titan
GeForce FX 5500 AGP (256MB) Inno3D Works using Natit. All resolutions, widescreen, Core Interface(CI), Quartz Extreme(QE) and OpenGL. TV-OUT not tested. Yes All resolutions Natit
GeForce FX 5600 XFX Works fully with latest Semthex under both Titan & Natit. (Natit provides better performance it seems.) Yes, both. Any Semthex kernel, Natit kext and edited NVDAResman.kext, NVDANV40.kext and GeForce.kext with device/vendor id (0x0312d10. - nix)
GeForce 5700 AGP (128MB) Asus V9570TD 10.4.8/8.8.1: Works well w/Natit on JaS 10.4.8 ISO. Need to replase card ID in .plist files of Geforce.kext, NVDARESMAN.kext and NVDANV30Hal.kext, after that QE/CE works. Yes - Both 1024x768@85, higher resolutions are supported. Yes/No (Need Natit; without editing .plists - QE/CE not supported).
Geforce FX5700LE (0x0343)  ?? Works out of the box on Jas 10.4.8 SSE2/3 No/No All resolutions supported
NVIDIA FX5700LE (256mb) BFG Tech I was able to install the Titan kext while I was booted into the Install CD, so I got the cool Cube effect of the setup assistant! A tiny bit of lag while the card starts up again after not doing any QE/CI in a while, (Dragging something into Dashboard doesn't ripple the first time, but all times after that for like 10 minutes, unless you don't let it power down.) Both All that I can see, using 1280x1024 on my CRT, absolutely stunning. Titan activates about 90% of the card.
GeForce 5700VE AGP (256MB) Verto 10.4.8/8.8.1: Works well w/Natit on JaS 10.4.8 ISO. No All resolutions are supported. (QE/CE not supported)
Geforce 5900XT (128MB) MSI Natit Installer 1.0. DVI works and QE & CI. no screen artifacts Yes, both Any No
Geforce 5900XT (128MB) Leadtek WINFAST X350 Natit/Titan Yes, both All Jas 10.4.8/Kernel 8.8.1
Geforce 6200 256MB MSI NX6200AX Natit/Titan Yes, both 1280x1024 Jas 10.4.8/Kernel 8.8.1
GeForce 6200 (256MB) MSI NX6200AX-TD256H D2 NVinject 0.2.1, Dual Monitors, DVI works, use AGPGart.kext (v. 1.2 for Intel chipsets, 2.x for AMD) to get OS X to recognize card as AGP bus, Core Image is not listed as "Hardware Accelerated," window server occasionally crashes... CI/QE supported 1360x768 JaS 10.4.8, Semthex 8.8.1
Geforce 6200 128MB Leadtek Using Titan.kext Both 1280x1024 Yes/Requires Titan.kext
GeForce 6200A Axle 3D Using MacVidia 1.0.7 Manual Patch No QE/CI 1440x900 Support No (hence QE/CI)/Yes (MacVidia Custom))
Geforce 6200 TurboCache XFX/Inno3d Works using Titan Kext and Natit Installer 1.0. DVI works and QE & CI. no screen artifacts! Yes, both Any No
Geforce 6200LE TurboCache EVGA Installed JaS 10.4.8 AMD INTEL SSE2 SSE3 - V1P DEVIANT DISKUTIL.iso Yes, both Any Just make sure you check Titan on the DVD for full QE/CI Support! To add support of S-Video (TV) you must use Natit Dual v0.02 (dual with extended desktop, no mirroring)
Geforce 6200(256MB) NVIDIA, SPARKLE(Kurouto-Shikou released in Japan) Works using Titan Kext. Both VGA and DVI. Full QE/CI. No screen artifacts! Yes, both Any Titan
BFX Geforce 6200 OC (256MB) BFG (NVIDIA) Both VGA and DVI work perfectly without any artifacts. However, DON'T INSTALL TITAN UNTIL AFTER INSTALLING THE OS, or else the registration window is all screwed up and you can't read anything. Install 10.4.8 WITHOUT the Titan kext, restart, register, restart, and then install Titan kext. Then restart, and everything will work. Yes, both Up to 1024x768, but likely higher if you have a larger monitor. Mine is only 15". Titan kext AFTER ORIGINAL INSTALLATION!!!
Geforce 6200 256MB XFX Installed Jas 10.4.8 SSE2 SSE3 Intel AMD DVD Both 1280x1024 (Highest For My Monitor) Just make sure you check Titan on the DVD for full QE/CI Support!
XpertVision Nvidia GeForce 6200 XpertVision Works using Titan. All resolutions, widescreen, CI/QE/GL. Both All resolutions Yes, with Titan
Geforce 6200TC 256MB PNY Using the NV40 nvidia patch Both 1280x1024 Yes/Requires NV40 patch who came on the installation, nothing more
Geforce 6600GT (128MB) Apollo Titan Kext DVI works and QE & CI. no screen artifacts, smooth as silk Yes, both Any No
GeForce 6600 TDH (256) Leadtek 10.4.8/8.8.1: AMD Final SSE2 SSE3 from Piratebay but without NV40 and X1000 , then installed latest Natit. 6600 TDH works perfectly, 7600GT need to edit Natit.kext and NV40 to include the device ID (02e0). Dual display works flawlessly on 6600, but on 7600 GT, digital output doesn't work, only works by using a convertor making both output analogue, which is bad for my cheap LCD display. BOTH All resolution and frequency Natit full work on 6600

7600GT required edit of Natit and NV40 kext and digital output won't work unless convert to analogue by adaptor. Make sure don't click X1000 ad NV40 support in 10.4.8 AMD Final SSE3 installation, then install latest Natit or Natit dual, then edit kext if 7600 GT.

GeForce 6600GT 128Mb Asus Works with new Natit Uni. installer! Yes, both. Any No
GeForce 6600GT AGP 128MB EVGA 10.4.8/8.8.1: Worked fine with natit and titan method. QE/CI fully work. Resolution and refresh work. World Of Warcraft works. WolfET Works. Dual-screen with natit (often 10sec blackscreen during startup). Yes, Both Any No, Need Titan or Natit
Geforce 6600GT 128MB NVidia/Club3D Works perfectly. Yes Any Yes
Gainward 6600GT (128Mb) nVidia / Gainward natit patch from Jas 10.4.8 Yes / Yes All Yes / No
Geforce 6800 (128MB) Leadtek Works perfektly using OSX 10.4.8_AMD_SSE3 from Piratebay after adding 0x004110de in IOPCIMatch in the Geforce.kext(Contents/Info.plist) and deleting AGPGuard.kext Yes, both Any Titan
Geforce 6800 (128MB NV40 core) ASUS Works perfectly out of the box! :) (JaS 10.4.8 SSE2&SSE3 patched) Both Up to my monitor's max, 1280x1024. CRT monitor @ 1600x1200. No patches needed
Geforce 6800GT (256MB) ASUS Works using Titan Kext. Both VGA and DVI. Full QE/CI Yes, both Any titan 11-01
Microstar GeForce 6800 128MB NVIDIA Titan`s kext, Kexts and framework from Apple Intel Update. Both Any (Using 1680x1050 on 20" wide LCD) TITAN kext and edited NVDAResman.kext NVDANV40.kext and geforce,kext
Geforce 6800 GS 256MB XFX Everything works perfectly Both All Yes/Titan
GeForce 7600GS (256MB) AGP EVGA On 10.4.8 installed Natit_edited kexts and inserted my dev ids in GeForce.kext, NVDAResman.kext, and NVDA40HAL.kext. Delete AGPGart.kext put in folder and change permissions. Reboot = QE/CI supported QE and CI All Natit and enter dev IDs
GeForce 7600GS (DD2 256MB) AGP XFX On clean Jas 10.4.8 (without titan/natit) inserted my dev ids in GeForce.kext, NVDAResman.kext, and NVDA40HAL.kext. Gets QE/CI but no agp bus support. Delete AGPGart.kext because it causes a black screen after bootup. Follow Spanakorizo's instructions [18]. Some have succeeded in getting AGP support, not me :(. QE and CI All Natit and enter dev IDs
Geforce 7600GS (256MB) PNY/Club3d Had to install nvidiaNV40.pkg over a clean Jas 10.4.8, remove AGPGart.kext, edit GeForce.kext, NVDAResman.kext and NVDA40HAL.kext with my own device ID (0x02e1), install in /System/Library/Frameworks OpenGl.framework and QuartzCore.framework taken from original Apple 10.4.8 update using Pacifist, remove Extensions.mkext and Extensions.kextcache, set chown root:wheel and chmod 755 to all Extensions (eg. sudo chown -R root:wheel /System/Library/Extensions/*) and diskutil repairpermission /. After reboot I got QE/CI. Yes, both Any I have Titan.kext but not installed, maybe is included in nvidiaNV40.pkg
7600GT DDR3 (256) Leadtek 10.4.8/8.8.1: AMD Final SSE2 SSE3 from Piratebay but without NV40 and X1000 , then installed latest Natit. 6600 TDH works perfectly, 7600GT need to edit Natit.kext and NV40 to include the device ID (02e0). Dual display works flawlessly on 6600, but on 7600 GT, digital output doesn't work, only works by using a convertor making both output analogue, which is bad for my cheap LCD display. BOTH All resolution and frequency Natit full work on 6600

7600GT required edit of Natit and NV40 kext and digital output won't work unless convert to analogue by adaptor. Make sure don't click X1000 ad NV40 support in 10.4.8 AMD Final SSE3 installation, then install latest Natit or Natit dual, then edit kext if 7600 GT.

Geforce 7600GT (256MB) XFX Had to edit the NVDAResman and NV40HAL with my own device ID(0x02e0), only annoying thing is the dashboard crash when using it Yes, both Any Titan or Natit
ASUS N7600GS,(256MB) NVidia / ASUS Semthex Kernel, DVI Works, VGA Analog not tested yet. I Inserted "02e1" as dev-id into GeForce.kext, NVDANV40HAL.kext and NVDAResman.kext. Injection using Titan.kext YES / YES Tested up to 1680 x 1050 Yes / NO - Titan.kext
Geforce 7800GS 256mb BFG Using Titan 1.0 and Natit_Dual Both ALL Yes/No
Geforce NX7600GS 256mb MSI/NVidia Wroks with Titan 1.0. Haven't tested others. Tested only 1 output, but System Profiler status ays that "No display connected". Both ALL Yes/No - Titan 1.0

[edit] PCI


[edit] Mobile


Hardware Name,(VRAM) Chip-Manufacturer / Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
GeForce FX 5200 (128 MB) Nvidia Everything works, including Quartz Extream and Core Image, All right out of the box using the Tubgirl DVD, 10.4.8, Semthex 8.8.1 Yes! All Titan and NV40
PNY GeForce FX 5500 (128 MB DDR) Nvidia This card works well with Titan, including Quartz extreame and core imgae. Working with 10.4.7 and up Yes All Titan and NV40
PNY GeForce FX 5200 (256 MB DDR) Nvidia I picked up this card after my Intel onboard video refused to work and I saw the above post. Installed from the JaS AMD-Intel SSE2-SSE3 with PPF1 DVD. Must select the NV40/Titan option or you'll need to download a driver later. All resolutions, QE, and CI work. Yes All Titan and NV40 in installation options
XFX GeForce FX 5200 (256 MB DDR) Nvidia Unselect the X11 pack. All resolutions, QE and CI working. Yes All Titan Nvidia pack required 7
BFG GeForce 6200 OC (256 MB DDR) Nvidia Used JaS AMD-Intel install 10.4.8 SSE2-SSE3. Select Titan ATI/NVidia support, all resolutions work QE/CI working. screen glitched for a second but works perfectly. Yes All Make sure to check Titan Install option
Radeon 9250 Visiontek Used JaS Intel install 10.4.8 SSE2-SS3 No Only 1028x760 Had no luck with QE or CI}
Hardware Name,(VRAM) Chip-Manufacturer / Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
Geforce4 Go 440 64mb Nvidia Works macvidiadrive no QE / CI Both ALL
Quadro4 700 GoGL (NV28GL) Dell Mobile Works using NVidiaEFI or using Natit but no internal diplay in that case. QE works All resolutions Semthex kernel, NVidia kext and edited NVDAResman.kext, GeForce.kext and NVDANV20Hal.kext-probably with device/vendor id
Geforce Go 6200 256MB ASUS Works using JAS Amd/Intel SSe2/SSe3 ISO and selecting natit and natit dual support Both ALL Yes/Natit
Geforce Go 7600 128mb SonyVaio Works perfectly using Titan OR Natit (all versions), but ONLY on an external monitor. Trying to solve that now. Both OK ALL Yes/titan or natit
GeForce Go 6600 256MB PCIe Toshiba Qosmio G10 JaS AMD/Intel SSE2/SSE3 Works with MacVidia drivers. Titan/Natit/NVdiaEFI/LaptopDisplay etc. supports only External Display ; Internal LCD is offline/black MacVidia Internal LCD: None Titan/Natit External Display: Both All Full Work: No
GeForce Go 6800 256MB PCIe Dell Inspiron 9300 JaS AMD/Intel SSE2/SSE3 with NV40 package (included Titan). Works on laptop LCD, external not tested. Both All Kernel panic initially, fixed by adding vendor and device ID to GeForce.kext and NVDANV40Hal.kext.
Radeon Mobility 9700 128MB ASUS JaS AMD/Intel SSE2/SSE3 with ppfv1. Additional steps to get full resolution and QE/CI detailed here Both All Yes/10.4.8-ATI9600Mobility.tar.gz

[edit] Sound Cards

AC97 CARD SOUND FIXING by Jinx at [19]

Ok, so i was playing around and found this

Applications -> Utilities -> Audio MIDI Setup Go to Properties For -> AC97 Audio (PCM) There should be two, one is input, the other is output the output is what we want

Now...

Theoretically the problem with higher pitch is due to a Hz imbalance.. and right there on the right, we have the frequency It seems to be too low... Change it to 48000hz That fixed it for me

Hope it works Good luck

Hardware Name Manufacturer PCI/USB Notes Fully working without patching
Toneport UX-1 Line6 Install drivers from Line6 web Yes
US-428 Tascam Install drivers from Tascam web Yes
Plantronics USB Headphones Plantronics USB Works out-of-the-box Yes
Sound Blaster Audigy MP3+ Creative Labs Not recognized by OSX No
Sound Blaster X-FI Series Creative Labs Not recognized by OSX No
Sound Blaster Live! 24-bit External (USB) Creative Labs USB fully working on 10.4.8 (Not tested on any other version). No driver or installation required. perfectly recognized as an USB SB Live! 24-bit External: Versin: 1.00 Just fyi, this is a USB 1.1 device. When multiple devices uses audio (like playing a a movie from quicktime and audio from itunes) there's distortion. Yes
Sound Blaster Live! 24-bit Internal Creative Labs Not recognized by OSX No
Sound Blaster Audigy2 ZS/Platinum Creative Labs Not recognized by OSX, onboard Texas Instruments Firewire Controller detected No, Firewire400 only
SoundBlaster CT4810 Creative Labs Everything except MIDI/Joystick appear to be detected. Audio degradation problems in some configurations, after 7 minutes of music/video playback. Check here for problem. No permanent solution at the moment... only pause for 2 secs and playback again. Yes
Extigy Creative Labs USB Working 2channel analogue output+headphone works, NEEDS power on/off/replug USB to work after each reboot!

Only works on SSE2 machines with 10.4.9 Netkas Kernel, works on most sse3 with older kernels

No, needs to be reconnected/powered on-off, each time you boot
Xmod Creative Labs USB Fully working. No driver or installation required.

Some people cannot use USB hub and must use motherboard USB port.

YES
Sound Blaster Digital Music LX USB (External) Creative Labs USB USB Audio. Automatically detected. Simply make sure you change your System Preferences --> Audio to use USB Device. Also change Settings in Applications --> Utilities --> Midi Audo so that everything is using USB device. Works ight out of the box. Yes, using Jas.10.4.8.AMD.Intel.SSE2.SSE3
Protools HD Core Card + 96 i/o Digidesign PCI Yep, thats a $8000 PCI card and a $2000 I/O module. Everything worked flawless with Jas 10.4.8+vp1+diskutility 10.4.7. (Pentium 4 double core, on a Intel 945 mobo) Yes
Saffire LE Focusrite Firewire All working fine 4ins and 6out ports including SPDIF. Drivers are universal binary. I have used 10.4.8 update Jas. Yes All
Fortissimo 3 7.1 Hercules Not recognized by OSX No
Hercules Muse Pocket USB audio card Hercules USB Automatically detected; everything works without patching; mic recognized but not tested Yes
Intel High Definition (ALC260) Realtek Followed all the guides, unsupported..
Intel High Definition (ALC662) Realtek Installed using this driver Everything works
AC97 High Definition (ALC850) Realtek Using drivers on JaS 10.4.8 AMD SSE2,3 beta2 install DVD. Use driver in the Notes section
Realtek AC97 OnBoard Audio (ALC850) Realtek Motherboard is an AsRock775Twins-HDTV Rev1.0. Tried editing kext files but no luck yet. Can't find Notes section of drivers. Not yet.
Intel High Definition (ALC883) Realtek Installed using this driver Everything works except headphone end mic.
Intel High Definition (ALC883) on GA-965P-S3 Realtek Contrary to other ALC883 chips on various motherboards, the ALC883 on a Gigabyte GA-965P-S3 rev 1.0 has fully-functional 7.1 analog audio support and Mic/Line-In. For more info regarding this audio controller and the GA-965P-S3, visit this step-by-step guide. No, follow the guide instructions
Intel High Definition (ALC888) Realtek Installed using this driver Everything works except headphone and mic. Driver needs this for working.
M-Audio Fast Track Studio - USB M-Audio USB OS X recognizes it as M-Audio Fast Track. Yes
Mackie Onyx 1220 with Firewire Add On Card Mackie FIREWIRE Coreaudio. Works out of box Yes
Yamaha 01x Yamaha works fine, drivers on [20] Yes
Sky Basic USB VoIP Phone Syba (Detected as a C-Media chipset) USB USB Audio, autodetected, works fine. Unit has external mic and stereo (or 5.1) headphone jacks, mute, volume buttons. 10 bucks at Newegg. Yes
C-Media USB Headphone Set (sold as Hama Virtual 5.1 Audio Adapter) C-Media USB USB Audio, autodetected, works fine. Unit has mic and stereo headphone jacks. Mute/volume buttons work. Mic recognized but not tested.15 EUR at Conrad Elektronik (Germany) Yes
M-Audio Transit USB M-Audio USB Everything works using M-Audio's Transit drivers Yes
Stealth plug USB Stealth plug USB Works out of the box including the volume up and down buttons Yes
Ego sys U2A USB Ego Sys - ESI working out of the box. requires u2a panel to control that, as usual for U2a, downlodable at Ego sys website. yes
ESI Juli@ ESI Not working, but we still trying to get this work here No
M-Audio revolution 5.1 M-Audio Not working, No
Creative Audigy LS Creative Not recognized, No
Presonus FireBox Presonus FireWire Runs without any problems or tweaking with 10.4.8 JaS, correctly identified on boot. Works in GarageBand, and Cubase SE3 with full audio/midi in/out. Yes
Presonus FirePod Presonus FireWire Runs without problem with 10.4.8, identified on boot. Works in GarageBand with full audio/midi. Yes
DSE USB 2.0 External Sound Card (XH6314) Dick Smith Electronics USB 10.4.8 JaS. Detected as C-Media USB headset. Yes
MOTU 828 mkII Firewire www.motu.com Firewire 8 analog in/out, 2 mic pres, adat in/out, standalone mode. Works with UB drivers from manufacturers website and it's connected to my mobo's (ABIT AB9 Pro) T.I. Firewire Controller. The FW controller shares the IRQ with the JMicron IDE/SATA Controller but there's no problem so far...The device and drivers work OK with XP SP1 too. Yes
Sound Blaster Audigy SE Creative Labs Not recognized by OSX No
Conexant HD Audio 5045 Conexant Speaker output only with appleazalia.kext. headphones and mic jacks do not work. NO
Sound MAX (Onboard)Intel D865GBF Intel Works in JaS 10.4.8 AMD Intel SSE2 SSE3.Defiant diskutil fix.iso without any kexts Yes
Audio Advantage Amigo USB Turtle Beach USB Works perfectly. No driver needed, just plug it in and go. Volume/Mute control on it works too. Yes
Emagic emi62m Emagic USB Needs driver: Download No (read note)
M-Audio Delta44 M-Audio PCI Does not work. No
M-Audio Audiophile 2496 M-Audio PCI Does not work. No
M-Audio MK-449C midi-controller M-Audio USB, MIDI All keys, knobs, buttons and faders working fine via USB, tested in Logic Express 7.2.3. Not tested via midi. Yes
RME HDSP9632 RME PCI 32bit/33mhz The driver 1.6C installs ok but produces distorted sound maybe
M-box 2 Pro[21] Digidesign Firewire 1394 card was TI chips.Works fine with Pro tools 7.3 and 7.4. Yes

[edit] Network Cards

[edit] Device IDs

To find your device ID, and for instructions on patching a kext with it, go to my user page. ~Penguino_Loco

[edit] Wired (Ethernet)

Hardware Name Manufacturer Notes Fully working without patching
7900A US Robotics Works without any patch on 10.4.8 JaS with PPF1+2 Yes
AE100 Airnet Work using PCGenRTL8139 Patch Yes
DFE-528TX D-Link Works without problems Yes
DFE-530TX+ Rev. 02/Rev. F1 D-Link Does not work natively, Hit and Miss situation, sometimes works with Via Rhine drivers sometimes doesnt. NO foolproof fix yet. No.
DFE-530TX+ Rev. E1 D-Link Does not work. Tried all fixes and cannot connect. No.
DFE-538TX, Device ID 0x1300 D-Link, Vendor ID 0x1186 Works without problems Yes
DGE-530T RevB1 D-Link Use skge.kext, set vendor id 0x4B011186 in plist m.musashi
D-Link DFE-520TX (chip marked as DL10028, but really a VIA VT6105 Rhine-III) D-Link Works well using kext from [22] Yes. Get latest patch from InsanelyMac
Realtek 8139 PCI Card Realtek You have to swap out the IONetworkingFamily.kext file that you will find in Backed Up Extensions/Old on the JaS DVD. Then it works perfectly. Working .kext file is dated Oct. 29, 2005 for reference. -- My 8139-based PCI card worked out-of-the-box with JAS 10.4.8 Intel+AMD SSE2/SSE3, no swapping needed. No (Yes: JAS 10.4.8)
TrendNet TE100-PCIWA (Realtek 8139) Realtek It's a Realtek 8139 PCI based-Card. Work fine with JaS 10.4.8. Maybe crash when loginwindow load (white screen), but try a lot of time to reboot and the verbose mode (-v at start) and it's OK. Yes
Netgear GA311 (Realtek 8169) Realtek Works fine with the 10.4.6 IONetworkingFamily.kext. I had to manually set to 1000Base-T to get DHCP-adresse for the first time, afterwards everything went O.K. Gigabit-Speed is working. Needs old IONetworkingFamily.kext
D-Link DGE-528T (Realtek 8169) Realtek Works with the stock AppleRTL8169Ethernet.kext and the realtek driver [23] (seems more reliable) after both are patched with the (non standard!) device and vendor id of 1186:4300 (ie 0x43001186). However, after booting, ifconfig shows "media type: <unknown>", and it's necessary to play a bit in System Preferences to get it to work. As a result, I certainly wouldn't recommend this card for a server system! Similar problems with solaris x86 - get a real tek instead (pun intended). Another user: For me, this card works fine after using the installer and patching device id. Probably not the easiest card to get working, but not to be dismissed when going out to buy yourself a quality all-round network card :) Haven't tested Gigabit capabilities, since I don't have the hardware for it. No
RTL8169, RTL8168, RTL8110, RTL8111, RTL8100, RTL8101 Realtek Works using this installer [24] No
RTL8111B/RTL8139/RTL8169/RTL8168 Realtek Needs RealtekR1000.kext

Driver for 8111/8168 also available from Realtek

Yes
CompUSA 10/100/1000 Network PCI Card (RTL8169S-32) Realtek Not even detected initially. I can confirm that the RealtekR1000 driver works great by running the installer. more info here Needs RealtekR1000
RTL8169S-32 Realtek Works with the Official Realtek Driver. Yes
Netgear FA311 Realtek May require IONetworkingFamily.kext from 10.4.7 Yes
Marvell Yukon Marvell Yukon Works without problems Yes, requires forcedeth.kext

EDIT: Marvell Yukon 88E8001 works with this

Nforce 4 Network Controller Nvidia Works with forcedeth drivers Yes, with forcedeth drivers
Nforce 3 Network Controller (NF3-250GB) Nvidia Works with JaS 10.4.8 AMD Intel SSE2 SSE3.Defiant diskutil fix.iso Yes
Intel Pro/100 Intel Works without problems Yes
Intel Pro/100 S Intel Not recognized No
Intel Pro/100 VE and VM Intel Works after replacing IONetworkingFamily.kext from 10.4.3. Found /System/Library/Extensions/

Get from InsanelyMac ... see Post 9

Needs old IONetworkingFamily.kext
Pro/1000 GT Intel Works on PPC and OSX86, no apparent problems. Gigabit, suppots JumboFrames and checksum offloading. Yes
Broadcom 440x Broadcom Works after replaced IONetworkingFamily.kext to version 1.5.0 (OSX 10.4.6). No
Broadcom NetXtream Gigabit Ethernet (BCM5705) Broadcom Not working. No
3Com 3C905B-TX 3com Works after replacing IONetworkingFamily.kext from 10.4.7 No
LNE100 Linksys Works fine after using the Tulip.kext file. See SVT_MAN's post. Tulip.kext Yes
Sitecom LN-027v2 SiteCom Seems to work just fine with everything Yes
Belkin F5D5000 Belkin Works natively 100% / not working with JAS 10.4.8 semthex kernel 8.8.1 Yes
VIA 6103 10/100 VIA works on JAS 10.4.8 AMD/Intel SSE2 SSE3 using the VIA Rhine driver Yes

VIA RHINE II ON ABIT MOTHERBOARDS SUPPORT WITH EASY MODIFICATION [25] FOR DETAILS AND DRIVERS

[edit] Wireless

Interface Standard Device Manufacturer Notes Fully working without patching
PCI B/G

108 Mbps (theoretical)

WDA-2320

[AR5212 Chipset]

D-Link

Atheros

Recognised as Ethernet device; no connectivity. Works with IO80211Family.kext extracted from 10.4.4 Myzar (use Pacifist, available here.

You may have to edit NetworkInterfaces.plist (located in /Library/Preferences/SystemConfiguration/) and set BSD name to en1 (as well as change the integer value to match the # in BSD name. Very similar to DWL-G520.


Device ID is pci168c,13! you should be able to add this to info.plist in the current IO80211Family.kext instead off loading 10.4.4 kext... [It is - in Windows form - pci0x1014]

No...

works with patching

PCI B/G WLI2-PCI-G54S (Wireless-G 125 High Speed) Buffalo Plug-and-play. Recognized as AirPort Extreme. Broadcom chipset. Try THIS is it doesn't work straight away. Yes
PCI B/G F5D7000eaE (Wireless-B/G) MicraDigital (Belkin on the board !!!) Plug-and-play. Recognized as AirPort Extreme. Atheros chipset.( must install 10.4.5 IO80211Family.kext) Yes
PCI B/G F5D7000tt (Wireless-B/G) Broadcom 4320 Recognized as AirPort Extreme after you add 4320 to info.plist of IO80211Family.Kext Yes
USB B/G 54Mbps WG2000 PROLink Wireless-G USB Adapter from PROLink. Works with ZyDAS ZD1211 Driver. ZyDAS ZD1211 Driver No
USB B/G 54Mbps MA-WL-USB Ralink? Wireless-G USB Adapter from Addlogix. Must install 10.4wireless drivers from install disc or possibly from RAlink USB2500 drivers at Ralink RT2500USB driver No
MiniPCI Express A/B/G 108Mbps AR5BXB6 Atheros Works as Airport Extreme ( AR5006 not working ) Yes
PCI B/G WL-138G v2 ASUS v2 only! Works as Airport Extreme, add DeviceID 4318 needed. No
USB B/G WL-167G ASUS Works, with additional ASUS software found on disk, as built-in ethernet No
PCI B/G WPCI810G Motorola Works as Airport Extreme. You need to read the forums (Doesn't work. Nothing show in network (Intel D945GTP Board).) No
Mini PCI Express B/G BCM4311 Broadcom Works as Airport Extreme Yes
Mini PCI Express A/B/G BCM4311 (Says 94311 on card) Broadcom Works as Airport Extreme. (Dell 1490). Need this fix:[26] Just do the last part, edit networkinterfaces.plist, reboot, and run network setup to activate the airport. No
PCI B/G/BT PC54g-BT MSI Ralink Technology Card. It works perfectly using wireless 802.11bg and bluetooth!. It connects perfectly (sending/receiving) with my Nokia 6280 mobile using bluetooth (isync, data transfer...). Yes
PCI B/G WMP54g Linksys Used Ralink Drivers. (Not for Intel D945GTP Board.Keeping the internet On & OFF all the time, consider this is no works on this board) Only version v4.0 works! All cards with version v4.1 do not work! No
PCI B/G W-Lan PCI Card Gigabyte Works fine with Ralink drivers. No
USB B/G 54Mbps LW053 Ver 1.0 - RT2571 chipset Sweex Works with the Ralink RT2571USB driver (the second in the list) Yes
USB B/G WUSBP54G v4 Linksys Works with the Ralink RT2500USB driver after editing the kexts according to this thread. No
USB B/G WUSBF54G Linksys ZyDAS ZD1211 Driver, need to edit kexts No
USB B/G WLAN-G-US1 Acer Works with ZyDAS ZD1211 Driver Download. No Airport Extreme (doesn't matter right ;)?)! No
PCI B/G WMP54G v4.0 Linksys Works with the Ralink RT61 + RT2500 driver straight after installation. Only this version v4.0 works! All cards with version v4.1 do not work! No
USB B/G F5D7050 v4000 Belkin ZyDAS chipset. Not recognized as Airport, AP with WEP key may not connect driver Yes
USB B/G F5D7050 v3000 Belkin Unknown chipset. Not recognized as Airport [27] works with this driver No
USB B/G DWL-G122 rev C1 D-Link Ralink Chipset, Need use Ralink RT2500/73 USB Driver, First time is OK, after restart found no device and need re-plugin, RT2500ReplugFix cannot solve this problem. Here you can stay update and download the USB driver. No
PCI B/G TEW-443PI Trendnet Atheros chipset. Recognized as Airport, support from 10.4.5 IO80211Family.kext, installed with Pacifist No
PCI B/G WG311v3 Netgear Not recognized by 10.4.10. This card uses a Marvell chip, apparently those don't work No
PCI B/G WG311v2 Netgear Not recognized. No
PCI B/G WG311T Netgear Reconized as Airport right out of the box. Speeds up to 108mb/s. If yours does not work check out [this website][28] Yes/no
PCI B/G TP-WN651G TP-Link Reconized as Airport Extreme. Claims speeds up to 108mb/s. Needs plist edit No
Ethernet B/G F5D7233 Belkin External wireless adapter plugs into Ethernet port; needs USB OR AC adapter for power. Easy browser setup...just works perfectly without need to worry about chipsets or patches. Can also be used as a wireless access point or router. Yes
Ethernet B/G F5D7330 Belkin Originally meant as a Wi-Fi gaming adapter for ethernet consoles. Simply plug into the ethernet port, and either 2 USB ports or AC adapter for power. If your network is not open (HAS an SSID and/or encryption) it must be configured on a Windows PC (the software only works on Windows) to set up the SSID/encryption key. Otherwise, works fine. Yes
Ethernet B/G DWL-G730AP Dlink Configuration is a little bit tricky but does not require PC. Works fine. Yes
PCI B/G DWL-G520 D-Link/Atheros chipset Take IO80211Family.Kext from 10.4.5 combo update. Then shows up as Airport Extreme, or edit AirPortAtheros5424.kext inside of IO80211Family.kext/Plugins and add your DeviceID "pci168c,13" (10.4.8)

I Also had to edit NetworkInterfaces.plist in /Library/Preferences/SystemConfiguration/ .. set DSDName to en1 and set InterfaceUnit to 1 .. now working fine ..

No
Mini PCI B/G Intel Pro Wireless 2200BG Intel The driver is now stable. Thanks to xKazu & Jalavoui. Currently work only with open network without security WEP/WPA. Forum and to download No
PCI B/G F5D7001 Belkin Leave out of system for initial JaS 10.4.8 Intel AMD SSE2, SSE3 DVD install. Once OSX installed; shut down, install card. Recognized as airport. Yes
PCMCIA B/G DWL-G630 v.C2 D-Link Add <string>pci168c,001a</string> to Info.plist in /System/Library/Extensions/IO80211Family.kext/Contents/Plugins/AirPortAtheros5424.kext/Contents/. After the Kext is modified the card will be recognized as an Airport Extreme. No
USB B/G 00062764 Hama Works after installing the lasted drivers for Mac Os X from the Hama Website: Hama Driver Yes
Mini PCI-E A/B/G 3945ABG Intel There is no working solution at the moment. Swap it out for a Dell Truemobile 1490(aka Broadcom BCM4311/BCM94311) on eBay for $10. No
USB B/G WL230USB Aztech Supplied drivers don't work - worked out of the box using the ZyDAS ZD1211 drivers. Unfortunately it's NOT recognized as Airport. Yes
USB B/G BS-W-USB Bluestork worked out of the box using the ZyDAS ZD1211 drivers. Not recognized as Airport and have to unplug replug it after each restart or start. Yes
PCI B/G SMCWPCI-G SMC Not working at all, realtek 8185 chipset, it seems that like other manufacturers, they sometimes change chipset (it was atheros before so maybe you'll be lucky...). NO

[edit] Other Expansion Hardware

Hardware Name Interface Device Manufacturer Notes Fully working without patching
ADAPTEC 39320 PCI U320 SCSI dual channel scsi/raid controller adaptec damn _NO_! this precious controller with my 5 * 15K atlas HDs can't be used with any OS X (both original or x86ized). Why apple do not keep up SCSI system which is the best in transfert rate and access time terms ?? No (damn)
ARC-11xx/12xx PCIe/PCI-X SATAII-RAID-Controller Areca UB Beta drivers at Areca FTP. Kernel Panic at boot - boots but unstable with inofficial drivers from areca support. No, unstable.
Broadcom 2045 USB USB Bluetooth 2.0 adaptor (PANBT333R) Broadcom Works perfectly, plug & play. Yes
RocketRAID 2320 PCIe x4 SATAII-RAID-Controller Highpoint Technology Get Mac Pro drivers from hpt website. Booting works, albeit slow. Yes
RocketRAID 2300 PCIe x1 SATAII-RAID-Controller Highpoint Technology Get Mac Pro drivers from hpt website, 2310 driver's. Yes
Canon S200 USB USB Printer Canon Printer Works Perfectly With the Canon Drivers On The DVD Yes, Fully Working
Dlink PCI USB2 PCI Nec USB2 controller Dlink / Nec PCI card is not listed but USB ports works fine as High Speed USB (USB2) native support for nec controller in OS X Yes
Noname VIA PCI USB2 PCI VIA VT6212L controller Noname / VIA PCI card is listed but EHCI doesnt work, UHCI works. No
Silicon Image 0680 PCI RAID (SiI-0680) PCI PCI ATA-133 RAID Controller Silicon Image Not detected, not supported. No
Bytecc BT-PESAPA PCI-e PCI-e SATA 2 Ports Internal, 2 Ports External + ATA133 1 Port RAID Controller Jmicron 363 needs patched AppleVIAATA.kext. Occasional block errors coming out of a long idle, but overall appears to be working fine. Only SATA tested. No
Manli CPESATA3G PCI-e PCI-e SATA 2 Ports + ATA133 1 Port RAID Controller Jmicron 363 needs patched AppleVIAATA.kext like ASUS or Giagbyte onboard 363 controller No
Delock 70137 PCI-e SATA II PCI Express Karte, 2 Port SiliconImage 3132 not listet as mac supported product, but drivers are on CD. Disable Raid functionalty by flashing the controller bios to make work with single drives. Go to SIl's web page. No/Yes for Raid users
Delock 89034 FireWire (IEEE 1394) PCI-Card PCI 2 External Port FireWire PCI Adapter VIA 6306 chipset osx86 detects the card, tested haardisks worked fine Yes
SIIG 1394 3-Port PCI Firewire Adapter RoHS Compliant PCI 3 External Ports / 0 Internal Port FireWire PCI Adapter SIIG / Texas Instruments (TI) TSB43AB23 chipset osx86 detects the card and attached devices seem to work fine Yes
ULTRA IEEE 1394 FireWire PCI Adapter PCI 3 port FireWire PCI Adapter ULTRA Products Fully supported, no drivers needed YES
u-Connect IEEE 1394 FireWire PCI Adapter PCI 3 port FireWire PCI Adapter Inland Products Fully supported, Generic Via VT6306 card, no drivers needed YES
Belkin IEEE 1394 FireWire PCI Adapter PCI 3 port FireWire PCI Adapter Belkin Fully supported, no drivers needed YES
Mcab Firewire 800 PCI Adapter PCI 3 port FireWire 800 PCI Adapter Mcab Fully supported, no drivers needed YES
GigaWare Wireless USB Mouse (26-284) USB USB mouse with 2 AAA batteries Gigaware (RadioShack) Fully supported, no drivers needed YES
Logitech 350 USB Headset USB USB Headset with integrated audio Logitech Fully supported, no drivers needed YES
Surecom Bluetooth Adapter EP2102 USB USB Bluetooth V2.0, class1 dongle Surecom Fully supported, no drivers needed yes, tested to pair with Nokia 6233
Enhanced Data Rate Wireless USB Adapter (GBU221) USB USB Adapter, with Bluetooth wireless technology, Bluetooth 2.0 spec compliant, Class 2 IOGEAR Fully supported, no drivers needed Paired with Moto SLVR, headsets, etc. [29]
MSI US54SE USB Wireless 11g USB Stick MSI ZyDAS 1211b Chip, works on JaS 10.4.8/8.8.1 4.5.7.0
CanoScan Lide 25 USB USB FletBed Scanner Canon Scanner works perfectly with supplied software! Yes
Sony EyeToy PS2 (VID 0x054C PID 0x155) USB Colour Webcam Sony Works with drivers from [30] Yes
Asus DRW-1814BLT SATA CD/DVD Burner Asus Drivers not needed. Not yet tried: lightscribe Yes
Bluetooth Explorer USB Mouse Microsoft Drivers not needed. Works out of box. Yes
Billionton GUBTCR42 USB Bluetooth dongle Billionton Drivers not needed. Works out of the box. Tested sync with bluetooth phone Yes
BenQ M800 & A122 USB Mouse & Keyboard BenQ Drivers not needed. Works out of the box. Yes
Genius MousePen Tablet 8x6 USB Tablet & Mouse Genius Mac Drivers are not bundled, but can be downloaded here. Drivers are PPC only but they work ok on any machine. a bit slow on P4 machines. Photoshop CS2 worked fine with them, but CS3 can't utilize pen pressure properly. Drivers for more Genius stuff can be downloaded from this link. Yes
Kensington USB Bluetooth Adapter USB Bluetooth dongle Kensington Drivers not needed. Works out of the box. Yes
VIA Firewire PCI Adapter PCI PCI Firewire Adapter, 3 Ports VIA Observe only the chipset version (im teste with VIA VT6306 / 0647CD

And Works Fine, but 'the same hardware, with only one diference (chipset revision) dont work (VIA VT3606 / 0550CD).

Extra Drivers and kexts not needed. Works fine on JaS 10.4.8 [JaS AMD-Intel-SSE2-SSE3 with PPF1 & PPF2].iso
Sweex Bluetooth Class II Adapter USB USB Bluetooth dongle Sweex Fully supported, no drivers needed Yes
Tecom Class 1 Bluetooth Adapter USB Bluetooth Dongle Tecom Fully supported Yes
Wacom Intuos2 A4 USB Graphics Tablet Wacom Works OOTB, install Wacom drivers to achieve additional functionality. JaS 10.4.8. Yes
Creative Webcam Vista Plus USB Webcam Creative Works after macam drivers installation. JaS 10.4.8. Yes
BlueFoof BTA-3000 USB Bluetooth Dongle BlueFoof Fully supported. No drivers needed. JaS 10.4.8. Yes
Labtec Verse 704 USB Microphone Labtec Fully supported. No drivers needed. JaS 10.4.8. Yes
HP 5550 USB Printer Hewlett-Packard Fully supported. No drivers needed. JaS 10.4.8. Yes
Verizon USB 720 AirCard USB Broadband Cellular Card Verizon Fully supported, install CD worked, rebooted and away i went! Yes
Linksys USB 100TX USB 10/100 USB Network Adapter Linksys Works with drivers from [31] Yes

This page was last modified on 9 June 2014, at 03:14.
This page has been accessed 1,390,789 times.
Powered by MediaWiki © 2013 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers