HCL 10.5.1/Desktops

From OSx86

Mac OS X 10.5.1 Hardware Compatibility Portable Computers Desktop Computers Hardware Components

.

This is a hardware compatibility list for 10.5.1 builds. Don't forget to add how you got OSx86 running on your desktop x86 computer, and to use proper English. Please see the discussion page for proper instructions on how to input your system specs. Also, please contribute to the HCL 10.5.1 page, which should list a more granular view of compatibility. If your computer isn't listed, you should try it if you have a SSE2 or higher processor. Kernels are available for most configured machines.

See the x86 software page for programs you can run without Rosetta.

Please list your computers in alphabetical order by manufacturer (Asus, Dell, HP, etc) . .

Contents 1 Acer 1.1 Aspire AM5630 Q6600 1.2 Aspire AM5620 1.3 Veriton 5600GT 1.4 Veriton 5800 2 Asus 2.1 T2-P (Barebones) 3 DELL 3.1 Dimension 5150/E510 3.2 Dimension 9100 3.3 Dimension 3000 3.4 Dimension 3100/E310 3.5 Dimension 4600 3.6 Dimension 8400 3.7 Dimension 8400 3.8 Dimension E520 3.9 Dimension 9200 3.10 Inspiron 1520 3.11 Optiplex 170L 3.12 Optiplex GX 270 3.13 Optiplex GX 270 3.14 Optiplex GX280 3.15 Optiplex GX280 3.16 Optiplex GX520 3.17 Optiplex GX620 3.18 Precision 390 3.19 Poweredge 750 3.20 Vostro 400 4 Gateway 4.1 Gateway 300S 4.2 GT5026E 5 IBM 5.1 Thinkcentre M52 8113F8U 6 Hewlett-Packard (HP) 6.1 Pavilion a1000n 6.2 Pavilion a1310n 6.3 Pavilion a6120n 6.4 m7250n 6.5 m7680n 6.6 Pavilion Slimline 3220la 6.7 Pavilion Slimline s3100y 6.8 Pavilion d4290 6.9 Workstation xw6400 7 Shuttle (Barebones) 7.1 SG31G2 7.2 SD30G2B 8 Other 8.1 Fujitsu Siemens ScaleoP 9 Medion

[edit] Acer

[edit] Aspire AM5630 Q6600

• Install Method: Must Do Aitkos-r2 with r3, Both Patches!! With no Hpet SSE3.
• Need to do Disable APIC. (currently trying to find a work around. definitely for install)
• BIOS sucks I Agree but do the no hpet sse3 kernel, remove the two kexts, and netkas smbios
• Runs All four corse. type "sysctl machdep" to make sure
• Onboard LAN works out of the box. But there is a driver to make it work bettter *shrugs*
• Built in Media Reader works out of box
• Firewire works out of the box.
• Onboard video works but only 1024X768 res. Get a new card if 2400hd. I got an nvidia
• Issue with System profiler I'm going to try the new appleSMBIOS. by netkas.
• Audio works with y default. havn't played with to much else of it
• Doesn't seem to be able to play off the shelf DVD movies, It might have some goddamned DRM craps built into the DVD drive. That was what I thought at first, the DRM. But turned once I replaced the ATI HD2400 pro with a PNY Geforce 7300 gt, got that going, it plays DVDs. :) However, if you see a " ?? 10960 " error like that, it's a Leopard bug, has nothing to do with the hack.
• It might also because it's a Blue-Ray/HD DVD drive. Seems to burn fine tho. Will try to install an regular PATA DVD drive. . . .
• Don't buy this machine for OS X unless you are willing to put in a lot of work to get it going. ..
• But it's worth it. . .

[edit] Aspire AM5620

• Install Method: Kalyway, EFI MBR
• Audio works with Azalia on DVD
• Onboard LAN not working
• Built in Media Reader works out of box .

[edit] Veriton 5600GT

• Install Method: Kalyway 10.5.1, EFI GUID, simple install on fresh partition.
• Audio works out of the box
• Onboard LAN not working
• On board video only 1024x768 .

[edit] Veriton 5800

• Install Method: Kalyway 10.5.1, EFI GUID, simple install on fresh partition.
• Audio does not work
• Onboard LAN not working
• On board video works fine .

[edit] Asus

[edit] T2-P (Barebones)

• Install Method: Kalyway 10.5.1
• Intel 865 chipset
• Audio works with Azalia from install
• LAN has problems, causes computer to freeze

[edit] DELL

[edit] Dimension 5150/E510

Install Method: Kalyway 10.5.1 (upgraded to Kalyway 10.5.2 Combo) - Processor: P4 BIOS A07

• Audio: Sigmatel 9220 (needed AppleHD patcher 1.15 with available Sigmatel 9220 codec dump)
• LAN: Intel 100/VE (needed to add 0x27dc8086 to /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleIntel8255x.kext/Contents/Info.plist)

 (above fix for LAN only works after update to 10.5.2)

• SATA HD works. IDE DVD works fine
• Graphics ATI X300 (needed Callisto 008 with DVI output, CI Software, QE Not Supported)
• Replaced graphics with geForce 7300 LE PCI-e (NVinject 0.2.1 CL/QE OK, no graphics lag after 9.2.0 universal kernel and the stock 10.5.2 system kext update)
• How to install: Simple install with GUID partition scheme & PC_EFI GUID bootloader, no other options chosen during install!! (all adjusted post-install) . . . .

---

Installed using Kalyway 10.5.1. and applied Kalyway 10.5.2 Combo+Kernel update

Processor: Pentium 4 HT 3.00Ghz,2MB L2, BIOS A07, 2GB RAM
Chipset: Intel 945G Express
Audio: Sigmatel 9220 (used method above to make it work)
LAN: Intel PRO/100 VE (used method above to make it work)
Video: NVidia 7600GT (used NVinject newest patch) works perfectly in dual display mode
SATA/IDE drives work fine.
Printer: HP OfficejetPro L7680 (used manufacturer's OSX drivers)

--- During installation I unchecked all options under Customize (previously checked options made constant crashes while booting Leopard). Biggest problem was making it boot from HD. Made the partition active using fdisk in Setup Terminal window and ran Leopard using this [1] method to avoid repeating welcome video issue. Afterwards, everything was fine.

[edit] Dimension 9100

• Install Method: Kalyway
• EFI v8 (would not boot w/ Vanilla)
• Audio patched with AppleHDA Patch v1.20
• Onboard LAN working with patch
• SATA II worked
• GeForce 8600GT XXX with NVinject
• Now running 10.5.2 Kalyway ComboUpdate w/ new kernel
• Everything is working great. Only problem is Time Machine shows error: "Volume not found" and will not work. Every other program I have installed or used works great.

[edit] Dimension 3000

• Install Method: Kalyway
• Audio doesn't work at first, you need to go to Audio MIDI in Utilities and change the speakers to channel 3 and 6. Ethernet sporadic at first, then fails completely. You can find fixes to both of these problems here: Testing Grounds .

Second Person

• Using iAktos r2
• Install Darwin+EFI Patch
• Clicked Customize and Remove AppleACPIManagement.kext
• Installed NTFS-3G 0.3.0
• Edited Info.plist in AppleAC97Audio.kext/Contents/PlugIns/AppleAC97CodecAD198x.kext/Contents/

IOPCIMATCH
<string>ADS75 ADS74 ADS73 ADS72</string>

to

<string>ADS78 ADS74 ADS73 ADS72</string>

• Change Audio Setting in AudioMIDISetup app to 6ch

PlugIn Surround sound speakers to all jack in back and have Surround Sound or change to sterio under speaker config and Choose 3,6 as Channel and have front and rear Standard out working.

• Install 10.5.2 Kalaway Combo Update
• DO NOT Install Vanilla 9.2 kernel
• Stick with Vanilla 9.1 or default iAktos kernel
• Running Full

Video No CF/QE fix found yet. If you have one please post kext in forum and a link to it here. . . .

[edit] Dimension 3100/E310

• Install Method: Kalyway
• Used GUID and when customizing the install I selected SSE2 and GUID only. The vanilla kernels don't work.
• Audio needs to be patched. I used the AppleHDApatcher1.2 and the linux codec dump (just copy/paste into .txt file).

[edit] Dimension 4600

• Install Method: iATKOS v1.0 r2
• Audio doesn't work
• LAN works with Intel patch
• IDE works out of the box .

Second Person

• Install Method: ToH RC2
• Audio works native! Try all audio ports/jacks
• LAN works 100% To patch LAN use this. See file for install instructions. <--TOOK ME A LONG TIME TO FIND!!!
• IDE works
• Needs NVInstallerV.31 kext. (Choose Customise and then select 128MB) . . . . .

Third Person WooHoo!!! It Works!!!

• Install Method: iATKOS v1.0i
• Audio doesn't work (yet)
• LAN works with Intel patch (select Intel LAN option from customize menu)
• IDE works out of the box .
• Nvidia GForce FX500 256Mb AGP works with Natit Driver

!!!MAKE SURE TO SELECT TO DISABLE CPU POWER MANAGEMENT !!!Also check out inhilist's guide to Vista Dual Boot in the Install Guides section . . . .

Fourth Person

• Install Method: iATKOS v1.0 (OS X 10.5.1, Doesn't work, Kalyway (OS X 10.5.1, Doesn't work), Upchuck (OS X 10.4.9, installs but doesn't boot (chain booting error), for both SATA and IDE), ToH RC2 (OS X 10.5.1, working on now with IDE and no SATA drives, will update when I get it working)

Fifth Person

• SSE2 Intel pentium 4

512mb ram
Intel pro/100 lan

• Installed with iAtkos v1.0ir2
• Sound, LAN, IDE Work out of box
• Geforce fx5200 works using prasys patch
• Sleep works properly using sse2/sse3 kernel out of box. .

[edit] Dimension 8400

• Install method: Kalyway
• Everything works out of box. (Replaced graphics, x300SE not yet functioning well in Leopard) .

[edit] Dimension 8400

• Installed iATKOS 10.5.1 v2, used Darwine boot loader
• Replaced video card with a 7300GT
• Installed a Realtek 8139 100/10 PCI card

The system is very stable, runs photoshop extended, iLife and iWork great. Very easy install with no hang ups. G.M.

[edit] Dimension E520

• Install method: wmarsh's E520 guide
• EFI v8 with Vanilla kernel
• GeForce 7300LE Video working with NVinject
• Sigmatel 9227 onboard audio working with Taruga's Tiger kexts here
• Alternate audio add on CMI8738 working output only with kext here
• Onboard LAN not working . . .

[edit] Dimension 9200

• Install method: ToH + 10.5.1 update + EFI 8
• Sigmatel 9117 audio working 100% with AppleHDA patch
• Integrated Intel Gigabit LAN not working
• ICH8 needs ICH8 patch .

[edit] Inspiron 1520

• Install method: Kalyway
• Sigmatel 9117 audio not working, AppleHDA patch not tested
• Bluetooth, Wi-Fi, WebCam working

[edit] Optiplex 170L

• Install Method: Kalyway
• Audio & Video works .

Second User

• Install Method: Kalyway/GUID/hacked kernel
• Vanilla kernel does not work
• Processor: P4 2.8 GHz
• Graphics: PNY GeForce 5200FX dual vga with NVInject 0.2.0; edit NVCAP for dual-screen functionality. Have not tried onboard Intel graphics, but they did not give QE/CI acceleration under 10.4.8
• QE/CI: yes/yes
• Audio: Soundmax AC97 works out of the box, but need to edit multichannel options in Audio Midi Setup. Cannot adjust system volume but can change volume in individual programs such as iTunes
• LAN: Intel 10/100VE works out of the box, but sometimes need to startup with boot flag -f if system reports ethernet cable not plugged in
• SATA: yes, detected on install and system is installed to 500GB SATA drive.
• iMovie quits on start; iTunes visualizations broken; other than that, all is well. Good enough to use as my primary. . . .

[edit] Optiplex GX 270

• Install Method: Kalyway & GUID Partition
• Audio & LAN working out of the box
• Nvidia FX5200 AGPx8 works with NVInject from DVD with QE/CI . . . . . . . . . .

Second user

• Install Method: Kalyway

Does not work until now. Problem: Endless rebooting on install. This may be caused by the IDE controller. I tried 2 GX270 in the smallest casing, both slightly different (2,4 Ghz P4 SSE2, 2,6 Ghz SSE2 + HT), Both work fine with the 10.4.8 version. I tried also the medium sized Gx280. Result: the install DVD boots and runs leopard installer without the endless reboot (But I could not do a full install due to the lack of a spare S-ATA drive). Preliminary conclusion: The other users succesfull install on a GX270 could be because a S-ATA drive is used instead of the P-ATA drive in my case. Or the IDE controllers in the GX280 and GX270 are different (but then I can not explain that my Kalyway DVD does not run).

[edit] Optiplex GX 270

• Install Method: iATKOS, MBR w/ Darwin bootloader
• Audio & LAN working out of the box
• Onboard 865G Video has CI but no QE G.M.

[edit] Optiplex GX280

• Install Method: Kalyway & GUID Partition & EFI
• Audio works
• LAN isn't working
• Video (GMA950) works out of the box . .

[edit] Optiplex GX280

• Older GX280 in clamshell case
• Install Method: iATKOS 10.5.1 v2 & MBR w/Darwin bootloader
• Audio works great
• Installed Realtek 8139 PCI 10/100 card, onboard NIC not working
• install adaptech firewire card (worked without any extra driver)
• Video (GMA900) works (QE/CI both not work) G.M. . .

[edit] Optiplex GX520

• Install Method: Kalyway & GUID Partition to avoid b0 error
• Audio works
• LAN works
• Video (GMA950)
• Some minor graphic artifacts.

[edit] Optiplex GX620

• Install Method: KALYWAY_LEO_10.5.1intel_SSE2_SSE3
• Board: Intel 945G
• Chipset: Intel 945G
• Processor: Intel Pentium D 2.8Ghz
• Vanilla kernel does NOT work
• Video: Onboard GMA950 -- works fine, after software update max resolution fell to 1024x768 (bummer)
• Audio: Onboard -- Works out of the box
• LAN: Onboard Broadcom NetXtreme BCM5751 -- requires AppleBCM5751Ethernet.kext & configuration of MAC address at every boot to work
• WIFI LAN: DLink DWL-520 (Seen as Atheros: 168c,3a13) requires patching IO80211Family.kext to work. Sometimes hangs the computer uppon connecting to a network.
• SATA: works fine . .

[edit] Precision 390

• Install Method: iATKOS v1.0 r2
• Processor: Intel Core 2 Duo (1.86ghz)
• Ram: 1gb 667 Dual Channel
• 2x 320 Western Digital SATA II 7200 rpm 8mb Cache Hard Drives
• Video: MSI nVidia 7300LE 256mb PCIe 16 (bought from newegg.com for less than $30)
• Audio: Doesn't work, tried multiple patches, has Sigmatel 92xx C Major HD
• LAN: Onboard doesn't work, used compatible LAN instead (Encore gigabit LAN, from newegg.com, less than $10)
• For dual boot with XP Pro I turned off second SATA port and installed XP on first HD, then turned that one off and turned on 2nd hard drive and set it as boot drive in BIOS and

installed OS X Leopard 10.5.1 and rebooted and went into bios and turned first hard drive back on and booted into XP and put iATKOS disc back in and copied Chai0 to C:\ and edited boot.ini last entry to say C:\Chain0="OS X Leopard". Dual boot works perfect. Also didn't install any of the patches from the iATKOS disc and Video and LAN worked perfectly. Changed sleep mode in OS X because system would hang if it went to sleep, turned off. .

[edit] Poweredge 750

• Install Method: Kalyway 10.5.1
• Processor Intel P4 3.4 Ghz HT
• Ram: 2 Gb
• Maxtor SATA 160 Gb
• Video: Ati
• Audio: unknown ( this is a rackmounted server )
• LAN: the 2 default Intel Gbit LAN work

• Installation was with -v and custom selected nothing but the bootloader and SSE2, no vanilla, no audio/video, no nothing else.
• After install boot with tohkernel -s , mount RW and remove all the ATI kexts in the System/Library/Extentions
• Reboot and boot once again with tohkernel and fill in the question, create account
• edit the boot.plist to boot with the tohkernel by default
• patch the AppleSMBios.kext because after install the 'About this Mac' causes a problem . . .

System scored 80+ in MacBench on CPU&Memory . . . . .

[edit] Vostro 400

• Install Method: Kalyway 10.5, then upgraded to 10.5.1 w/ Software Update
• Onboard LAN, Intel 82562V-2 (dev: 10c0 vendor: 8086) not working
  • (Installed a second supported card for network)
• Onboard Audio, Realtek ALC888 (dev: 0888 vendor: 10ec) working - AppleHDA, patcher 1.20
  • Only Headphone and Stereo Out works, no surround sound, no mic or line in
• NVIDIA 8600 (dev: 0402 vendor: 10de) working
  • I used this installer from some blog to get the video card working. Also tried MacVidia, but had no luck with that. . . . . . . . . . . . . . . .

[edit] Gateway

[edit] Gateway 300S

This PC model was built in March of 2003

This applies to:

Gateway 300s Tower Gateway 300s Mid Tower Gateway 300s Mini Tower

• Install Method: Must Do iAtkos-r2.

• Install all packages except EFI and video drivers!!!!

• EFI emulation is no compatible with BIOS
• 120x764 video by default (Can't change)
• Network working out of box!
• Sound-out working by default
• Sound-in not tested
• USB bus working
• Printer port not tested
• DVD/CD Drive is working
• Floppy Drive not tested
• You need to disable LAN from BIOS in order to avoid the account creation loop.
• Restore all factory defaults before install.
• Power button - it acts as sleep button, to shut down you must click the shutdown button in Leopard, you need to the same to re-start
• Leo4All v3 might work with GUID (iAtkos only does MBR)
• Need to select all patches
• Need to select all System Patches
• Need to select all Drivers except video
• If you have a video card select only the driver specifically for it
• Darwin boot loader with out EFI other wise it will keep re-booting

Note: Leopard runs very slugy, this is not a very good system to run Leopard . . . .

[edit] GT5026E

• Install Method: Kalyway
• Board:Intel (cortez) 945G
• Chipset: Intel 945G
• Processor: Intel Pentium D 2.8Ghz
• Audio: 10.4.3 Kext Patch[2]
• LAN: Use purple text for leopard [3]
• Sata and IDE work out of box
• MBR partitioning instead of Guid

[edit] IBM

[edit] Thinkcentre M52 8113F8U

• Install Method: Kalyway
• Board: IBM
• Chipset: Intel i945G/GZ revA2 & ICH7/R
• Processor: AMD 64 X2 2.4GHz Socket 939
• Audio: Works out of the box
• LAN: Works out of the box
• SATA & IDE works
• Need to turn off Journaling or else you get a "Journal Magic Is Bad" message after install.

[edit] Hewlett-Packard (HP)

[edit] Pavilion a1000n

• Install Method: Kalyway
• Board: ASUS P4GV-LA BIOS 3.09
• Chipset: Intel 845G
• Processor: AMD 64 X2 2.4GHz Socket 939
• Audio: Works out of the box
• LAN: Works out of the box
• SATA doesn't work
• IDE works buy very slow
• Took 10 hours to install because of chipset

[edit] Pavilion a1310n

• Install Method: 10.5.1 for AMD
• Board: ASUS A8AE-LE BIOS 3.15
• Chipset: RS482 & SB400
• Processor: Intel Pentium D 820
• Audio: Works out of the box
• LAN: Works with Realtek 8139
• SATA & IDE works
• Need the SSE3 kernel, no HPET, and remove the Thermal kexts

[edit] Pavilion a6120n

• Install Method: Retail DVD & BrazilMac
• Board: ASUS P5LP-LE BIOS: Award 5.1
• Chipset: Intel 945G & ICH7-DH
• Processor: Intel Core 2 Duo E4400
• PC-EFI and Vanilla Kernel works
• Audio: Works with AppleHDA and dump
• LAN: Doesn't work
• SATA & IDE works (SATA set to AHCI)
• Install guide here .

[edit] m7250n

• Install Method: Kalyway
• Board: ASUS P5LP-LE
• Chipset: Intel 945P
• Processor: Intel Pentium D 820
• Audio: Works out of the box
• LAN: Works with AppleIntel8255x.kext
• SATA & IDE works

[edit] m7680n

• Install Method: iATKOS 1.0i r2 + GUID + EFI v8
• Audio works
• LAN doesn't work . . . . . . . . .

[edit] Pavilion Slimline 3220la

• Install Method: Kalyway vanilla kernel and EFI 8
• Board: ASUS IPLP-AR
• Chipset: Intel 945
• Processor: Intel Pentium E4400
• Audio: ALC888 need patch from AppleHDAPatcher 1.20 with alc888_ich7_codecdump
• LAN: Works with AppleIntel8255x.kext adding dev ID 0x27dc8086
• SATA & IDE works
• Graphics Intel GMA950 works natively . .

[edit] Pavilion Slimline s3100y

• Install Method: Kalyway
• Board: ASUS IPLP-AR
• Chipset: Intel 945
• Processor: Intel Pentium E6600
• Audio: ALC888 drivers
• LAN: Can't get it to work. Even though it is Intel PRO/100 VE 0x27dc8086
• SATA works
• 8600GT: defaults to 1024x768 after OS install. Need NVInstall to work. here Note: Punk92's installer and NVInject does NOT work and locks up the system. . .

[edit] Pavilion d4290

• Install Method: Kalyway
• Board: ASUS P5LP-LE
• Chipset: Intel 945P
• Processor: Intel Pentium 4
• Audio: Integrated works out of the box (when supplied Soudblaster X-Fi was removed)
• LAN: Added 3c905
• SATA & IDE works
• USB and Firewire works
• Graphics Nvidia GeForce 7800 GTX 256Mb PCIe works with NVInject . .

[edit] Workstation xw6400

• Install Method: Kalyway 10.5.1 Intel SSE2 SSE3, Kalyway ComboUpdate 10.5.2, Apple Graphics Update
• Board: HP Motherboard
• Chipset: Intel 5000X
• Processor =: Intel Dual-Core Xeon 5150 / 2.66 GHz
• Audio: Integrated Sound Card (tried Azalia no joy) - (None Functional) Installed Sound Blaster CT4810
• LAN: Broadcom BCM5752 - (None Functional) Install Realtek PCI Network Card
• SATA & IDE - (AHCI didn't work / switched BIOS to Separate IDE / Processor: VT Enabled
• USB Works
• EVGA - NVidia 7900 GS - Dual DVI, Dual Monitor Conf. , All resolutions works, QE,CI Works.

NOTE: PC_EFI v8.0 was required on DVD Boot.

[edit] Shuttle (Barebones)

[edit] SG31G2

• Install Method: Kalyway 10.5.1 w/ Vanilla Kernel & EFI MBR
• Processor: Intel Core2Duo E 6750 recognized as 1 Core, the 2 Cores working!
• RAM Modules: 2 x 2 Gigabyte Geil Black Dragon PC 6400 800 Mhz.
• SATA / IDE working
• Graphic: Asus EN 8500 GT with 512 MB recognized as 256 MB(not out of the box - with installer!)Resolution changeable
• OnBoard Graphic: Intel GMA X3100 Resolution only 1024x768
• W-LAN: D-Link DWL-G 122 Rev.C with Prasys Driver (Airport look) Replug Problem!!!
• Audio: ALC888 patched with HDA Patcher 1.20 - working line out, mic in and Headphone, Surround and Digital out not tested.
• LAN Marvell 88E8056 Ethernet Network-Controller (Gigabit) working out of the Box!

Everything works great like a real Mac! I like it very well!!! . . . . .Greets from TimeActor . . . . . . . . .

Hi there, i updatet my system with Kalyway 10.5.2 (at TPB) and the Kernel Package on february 13. Without any problems! After that i update the apple graphics original from apple - everything works fine!!! . . . .

[edit] SD30G2B

• Install: Kalyway 10.5.1 disc using EFI MBR. Darwin dual-boot with XP working.
• Processor: Intel Core 2 Duo running at stock 2.66Ghz. Both cores recognized.
• RAM: 1GB 667 Stick. Going to upgrade to 2GB soon.
• Hard Drive: 250GB SATA Drive /w 2 MBR Partitions.
• Graphics: GeForce 7900GS at 256MB, QE supported, running great. Onboard Intel Graphics 950 not tested.
• DVD Burner: HP dvd 940, LightScribe not tested.
• Audio: Realtek ALC888, working with Kalyway's Azalia out driver, rear sockets works, front sockets non responsive.
• LAN: Marvel 88E8001 Ethernet, working with this kext: [4]

Only network didn't work out the box, simply installed the kext located in InsanelyMac forums & was away, running fantastic. Going to use Kalyway's 10.5.2 update now. .

[edit] Other

[edit] Fujitsu Siemens ScaleoP

Current OS X Version: 10.5.1 Install method: iACTOSv1.0 r3 - did not use efi(couldnt get efi to work) on customise options i selected - remove cpu power management and - appleSMBIOS

Prebuilt = Y

Motherboard: ASUS P5GD1-FM Bios Version:V1203 - updated via fujitsu website Chipset: i915+ich6 Audio: ALC AZALIA 861 - works great - no probs whatsoever LAN: seems to be working, recognised althought dont use lan - so cant comment

CPU Model Number: Pentium 4 530 3.0ghz - HT - socket 775LGA Recognised as: 2.99ghz

Memory/DDR: 1.25gb

Video Model: ATi Radeon x300se Bus Type: PCIe Memory size: 128mb QE/CI working? Yes to a acceptable standard Resolution changeable? no set at 1024x768x32 Required patches or bios flashing? no - none little mouse tearing when scrolling pages with scroll wheel - gonna buy a supported graphics card shortly

SATA/IDE working: Both sata hards are workin - both ide cdrw & dvd rw working

Wifi & patches? Using Belkin f5d7000v3 - driver used is realtek STA_CardbusPCI-D1.0.4.0 UI-1.3.0.0_2006_11_23.dmg - works fabulous...

other peripherals/pci addon cards? modem recognised(not used) wireless Advent USB keyboard and mouse works without any problems .

[edit] Medion

Medion 8800 (aldi PC)

Current OS X: 10.5.1

Specs:

Processor: Intel Pentium D 830 3.0Ghz

Motherboard model: MSI 7204

Chipset: Intel i945P

Southbridge: 82801 GB ICH7/R

Graphics Card: GeForce 6700 XL 128MB

Working out of the box:

• LAN
• SATA
• IDE
• Processor (Pentium D 830)
• USB

Needs Patch:

• Audio: ALC882: driver from kalyway DVD
• Video: Geforce 6700 XL 128MB: NVinject from kalyway DVD

Running like a Charm . . . With EFI and MBR bootloader . . . . . . . .