HCL 10.6.6/Desktops

From OSx86
Jump to: navigation, search
Mac OS X 10.6.6
Hardware Compatibility

This is a hardware compatibility list ONLY for OEM desktop computers. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying a desktop. Don't forget to add how you got OSx86 running on your x86 desktop computer, and to use proper English. Please see the discussion page for proper instructions on how to input your system specs. Also, please contribute to the HCL 10.6.6 page, which should list a more granular view of compatibility. If your computer isn't listed, you should try it if you have a SSE2 or higher processor. Use vanilla kernel if it is supported.

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for 10.6.6 builds only.

Please list your computers in alphabetical order by manufacturer (Asus, Acer, Dell, HP, etc)

For how to edit the Wiki, please see this thread. Thank you!

Note: Please add whether your device supports QE, Quartz Extreme, graphics. Try playing a movie with Quicktime Player.

Contents

[edit] Acer

[edit] Aspire L100

Chipset Notes Extras Used
nVidia C51PVG

+ MCP51


Main Bits

  • AMD Sempron™ processor
  • 2.0 Ghz
  • 1GB DDR2
  • NVIDIA GeForce 6150 SE

Installation

  • Leo Hazard Snow Leopard 10.6.1-10.6.2 SSE2/SSE3 Intel AMD DVD

Options Selected (Other than Defaults):

  • Legacy Kernel 10.2 Intel AMD
  • install 10.6.1 & 10.6.2 updates
  • AMD
  • Graphics:
EVOenabler for Extra/extensions
EVOenabler for /System/Library/Extensions
NVEnbaler
NVInject
  • System Support:
AHCI SATA Fi x /Extra/Extension
SMBIOS Resolver

After booting to your desktop, run Marvins AMD Utility(located in the applications folder)to patch your CPUIDs. Next download Mac OS X 10.6.6 Combo Update. Run the installer but DO NOT restart when it prompts you to do so. Instead, grab legacy kernel installer from hereand run it. Reboot. You're done

Working

  • Everything

[edit] Asus

[edit] P5Q SE2

Chipset Notes Extras Used 32/64bit working
Intel P45
  • Processor: Intel DualCore Pentium E5500 2.8GHz
  • RAM: 2 x 2GB DDR2-800 Kingston ValueRAM
  • Video - ATI Radeon HD 4870 1GB
  • Ethernet - Onboard RTL8111C
  • Sound - Onboard VIA VT1708S
  • Storage - Intel ICH10 Sata; Marvell 88SE6102 Pata

Installation

  • Installed Hazard 10.6.1-6.2 and deleted the AppleTYMCE.driver.kext. Then updated via SU to 10.6.6, restarted into another working SL or Win 7 with MacDrive installed and again deleted the AppleTYMCE.driver.kext and the SleepEnabler.kext. Then restarted and everything worked. Since I installed the update to 10.6.5 my PC runs with the original Kernel of OSX and I can do every Update simply through software actualisation. Only thing I had to do for full resolution 1920x1080 was to install SwitchResX and manually set up my resolution. Now everything works absolutely great, incl QE/CI.
  • Graphic with GraphicEnabler
  • Sound with VoodooHDA
  • LAN with RTL8169.kext
  • USb out of the box

Yes

Yes

[edit] Dell

[edit] Dimension E510/5150

Chipset i945g Notes pm me "j0eynoise" for Dimension users who need help.
Intel ICH7
  • Processor: 3.2ghz and 2.6ghz Pentium D
  • RAM: 4.0gb DDR2 800mhz

Installation

  • iatkos S3 10.6.3 qoopz 10.3 kernel, Chameleon v2 RC5, Sleep Enabler, Intel SATA/IDE, Voodoo HDA, NVEnabler
  • Combo update to 10.6.6 before rebooting run Multi-Beast 3.9.1 and install the IOUSBFamily Rollback.
  • Can also use Hazard 10.6.1-10.6.2 Intel AMD SSE2 SSE3 Distro and then upgrade using the 10.6.7 combo update
    • Make sure to use the 10.7.0 Legacy Kernel (10.6.7 kernel) for P4 and PentiumD processors (E510 Runs Only These Types)
    • Found using the 10.6.0 Legacy Kernel (10.6.6) works best for the 10.6.7 combo update
    • Updated successfully to 10.6.8; remember to remove SleepEnable.kext after update and to backup kexts in (/S/L/E) before proceeding
  • Installed Chameleon V2.1 - working perfectly
  • Installed IntelGMA950 for Video and other Chipsets - working; correction kext is not loaded in extensions; Video HW support is minimal, no GL
    • Must customize screen resolution with Chameleon Wizard in order for higher res to be accomplished

Working

  • SATA
  • optical drive: HL-DT-ST RW/DVD GCC-4482B
  • USB: full working after Multibeast USB Rollback.
  • Graphics: Nvidia Geforce 8400gs 128mb dected only also nVidia Geforce 7600 GS 256mb w/NVEnabler
  • Ethernet & Audio: voodoHDA, AppleIntel825.kext
  • Wireless : RT2870 Working fully. Also Edimax ew-7811un with official 10.6 drivers.

Caveat

  • Audio will not work without doing the following:
    • Install VoodooHDA (ver. 0.2.1); "j0eynoise" what ver of VoodooHDA do you have?
    • Remove AppleHDA.kext from /System/Library/Extensions (make a backup of that file before deleting just in case)
    • Reload
    • Go to "Settings" then "Sound" and then click on the onboad device entry in the list under "Output"

[edit] Optiplex GX520\620

Chipset Notes Extras Used Proof
Intel ICH6
  • Processor: 3.4GHz Intel P4 650
  • RAM: 1536mb DDR2

Installation

Working

  • SATA
  • optical drive: HL-DT-ST RW/DVD GCC-4482B
  • USB: Working
  • Graphics: Intel GMA950
  • Ethernet & Audio: [1]
  • AppleAC97Audio.kext
  • AppleBCM5751Ethernet.kext
  • AppleIntelIntegratedFramebuffer.kext
Media:Sl1066.png

[edit] Optiplex 980 Mini-Tower

Chipset Notes Extras Used
Intel Q57

Express

Main Bits

  • Processor: 3.2GHz Intel Core i5
  • RAM: 4GB 1333 MHz DDR3

Installation

  • iBoot + 10.6.3 Retail DVD
  • Combo update to 10.6.6
  • MultiBeast w/ options: EasyBeast & System Utilities

Working

  • SATA
  • Optical drive: TSSTcorp DVD+/-RW TS-H653G
  • USB: Working
  • Graphics: PNY NVIDIA GeForce 9800GT
  • Ethernet & Audio: Intel 82566 Family Gigabit & Realtek ACL269 Audio

NVEnabler, VoodooHD 2.61 and Intel 82566 Family Gigabit Kext

[edit] Inspiron 530 / Vostro 200

Chipset Notes Extras Used
Intel Q6600

Express

Main Bits

  • Processor: 2.4GHz Intel Core 2 Quad (Q6600)
  • RAM: 6GB 667 MHz DDR2

Installation

  • iAtkos S3
  • Combo update to 10.6.6
  • MultiBeast w/ options: EasyBeast & System Utilities

Working

  • SATA
  • Optical drive: TSSTcorp DVD+/-RW TS-H653G
  • USB: Working
  • Graphics: Asus NVIDIA GeForce GS8400
  • Ethernet & Audio: Intel 82566 Family Gigabit & Realtek ACL269 Audio

NVEnabler and Intel 82566 Family Gigabit Kext

[edit] Optiplex SX270 Mini-Tower

Chipset Notes Extras Used
Intel 865G

(ICH5)

Main Bits

Installation

  • myHack 1.1.4 + 10.6.0 Retail DVD (and server version)
  • Combo update to 10.6.6

Working

  • PATA
  • Optical drive
  • USB: Working
  • Graphics: Intel 82865G Non-QE-CI VESA mode
  • Audio: Intel Corporation 82801EB


[edit] Zotac

[edit] ZBOX HD-ND22

Chipset Notes Extras Used 32/64bit working
NVIDIA MCP7A

Main Bits

  • Processor: Intel Celeron SU2300 (dual core)
  • RAM: 4GB 667 MHz DDR3

Installation

  • Hazard Snow Leopard 10.6.6
  • Chamaleon

Working

  • SATA
  • Optical drive: TSSTcorp DVD+/-RW
  • USB: Working Full and Half Speed, all ports
  • USB Modem
  • Hauppauge USB TV capture
  • nforce ethernet. No wi-fi.
  • Graphics: NVIDIA ION, QE/CI working, HDMI and DVI working
  • Audio: ALC888 analog. HDMI audio NOT working
  • ALC888 Kext
  • No extra kext needed.
  • Wi-Fi can use realtek kext, but it´s a bit shaky

Yes

Yes


This page was last modified on 22 December 2013, at 09:11.
This page has been accessed 130,132 times.
Powered by MediaWiki © 2013 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   Mac Netbook  |   Web hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers