HCL 10.6.7

Mac OS X 10.6.7 Hardware Compatibility Portable Computers Desktop Computers Hardware Components

This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.

• ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
• Please add hardware into tables.
• This is for 10.6.7 builds only.

For how to edit the Wiki, please see this thread. Thank you!

You're looking for an Installation guide? see here

Note: For suggestions about table headings, please join the discussion here.

Motherboards

Asrock

Hardware Name	Chipset	Notes	Patches Used	32/64bit working with patches
G31M-GS	G31	Everything works fluently Usb,DVD,SATA,etc. You need to go to the BIOS and under the USB Settings you have to set the last point to DISABLED otherwise it wont work ! ( You also need BIOS Version 1.30 ). I used iATKOS S3 version 2 ( On the Retail Snow Leo disk you will get a Kernel Panic ;) OSX iAtkos Settings: Bootloader: Chameleon v2 RC4 Bootloader Options: UNSELECT THAT POINT Patches: Use standart Seetings Drivers: Use standart Settings + VGA/nVidia or ATI or INTEL it depends on your GPU Language Packages: Choose your language. CPU: Intel E7500 2,93 GHZ Dual Core SATA: Works with AppleIntelPIIATA.kext IDE: Works with AppleIntelPIIATA.kext LAN: Needs RealtekR1000SL.kext Audio: Needs VoodooHDA.kext USB: Works Onboard video: No QE/CI	VoodooHDA, RealtekR1000SL	Yes	?
G31M-S	G31	Everything works except audio which is noisy Disable USB Legacy in BIOS (so you'll need a PS/2 keyboard to install), install iAtkos v2 s3 with Chameleon Bootloader. You'll maybe need this 1.80 modified bios to boot properly. Update to 10.6.7 (Apple combo), setup Chameleon RC5, and install Realtek last network driver from Multibeast. Add the boot option "USBBusFix" (for example using Lizard), and you'll be able to boot with USB Legacy on in BIOS.	VoodooHDA (really noisy)	Yes	?
G31M-S R2.0	G31	Everything works perfectly except of sleep. Disable "Legacy USB Support" in the BIOS! Update to the newest BIOS version if you haven't yet. I used iATKOS S3 v2 (kernel panic with Retail DVD) Setup settings: I installed no bootloader (I use iBoot), but you can. Bootloader Options: UNSELECT THAT POINT (if you install a bootloader) Patches: Use standard settings Drivers: Select the drivers you need Language Packages: Choose your language. CPU: Intel Core 2 Quad Q8400 4x 2,66Ghz LAN: Needs 81xx Retail driver from Realtek Audio: Needs VoodooHDA.kext USB: Works Onboard video: No QE/CI	VoodooHDA	Yes	Yes
G41M-VS3	G41	Everything works OOB. System Specs: Processor Intel Core 2 Duo E7500 2.93GHz 4 Gb RAM (2x2Gb DDR3) PCIe Nvidia 9500GT 1Gb (built-in VGA not tried as most are not supported) 500Gb SATA HDD & SATA DVD-R USB Keyboard and USB mouse Optional: Edimax EW-7811Un for Wireless (or other Edimax USB WiFi as they all support MAC OS) No special BIOS setup required (OOB settings works well, even legacy USB can be left ENABLED, but re-order the 1st Boot device to CD/DVD) The installation method used was iBoot+MultiBeast using Retail OS X 10.6.0 updated from Internet or using Combo 10.6.7 update (torrent downloadable). Other installations work just as good (i.e. iATKOS S3 v2, iHAZARD 10.6.6, etc.). When using the iBoot+MultiBeast method (recommended), Upgrade to 10.6.7 before running MultiBeast. It is noticed that after the upgrade the sound stopped working. This is resolved when installing MultiBeast. When Installing MultiBeast, leave default values as is but select from drivers the latest VoodooHDA.kext to re-enable the audio. NVEnabler can be selected but my card worked without it.	VoodooHDA, (optional NVEnabler)	Yes	Yes
870 Extreme3	AMD 870	System Specs Processor AMD Phenom 1090t 6 Core 16 Gb RAM (4x4Gb DDR3)(must use maxmem=4096 for install. I left it this way as I did not mind the performance on just 4 gigs. The 16 is for my dual boot into windows 7) PCIe Saphire Radeon 5750 1Gb 500Gb SATA HDD & SATA DVD-R USB Keyboard and USB mouse Set Bios to AHCI. The installation method used was Nawcom boot cd + Retail 10.6 disk. Install using maxmem=4096 (if you have over 4 gigs installed) and GraphicsEnabler=No then boot from disk again. Setup account. Ethernet is not supported at this point of the install. Must use the Lnx2Mac's Realtek RTL81xx Driver from Lnx2Mac's Blog. Download this to a flash drive or CD and install. Reboot and and boot from the boot disk again. You should now have internet after letting it find your driver and ip address. Download the combo 10.6.7 update and nawcom's 10.6.7 legacy kernel. Download Chameleon 2.0 RC5 r828. Install the 10.6.7 update. Before rebooting install the legacy kernel and chameleon. Select the default theme from the customize section of the Chameleon installer. Reboot. This time boot from the hard drive. You should have a working install. Depending on your video card you may need to do some editing. For my 5750 I added my device id (0x68BE1002) to the ATI5000Controller.kext as well as the ATIx3000Controller.kext for good measure. Rebooted after editing com.apple.boot.plist to change GraphicEnabler to yes. Everything worked. Problems USB will not awake from sleep. I get the USBOHCI unload across sleep issue. Don't know how to fix it. CPU labeled as unknown and RAM is mislabeled. Just need to use osx86 tools to rename it. Sorry if this didn't come out right on the WIKI page. First wiki edit and it could not get it to show up right.	VoodooHDA, Realtek RTL81xx Driver,	Yes	Yes

Asus

Hardware Name	Chipset	Notes	Patches Used	32/64bit working with patches
P5KPL-CM	Intel G31 + ICH7	Installed with iAtkos S3 v2 (10.6.3). Installed fine! Graphicsenabler=No at first. Then Updated to 10.6.6 combo, Graphics update, then Multibeast and repair. Then eventually 10.6.7 update and re-multibeast. Broke my PCI wifi airport, but then chimera 1.3 fixed it. No DSDT needed to get this almost fully functional. Boots 32/64bit, Graphicsenabler=Yes now. BIOS settings close to default; works great! CPU: Intel Core2Quad Q6600 (~2.4GHz) --> OOB 32/64 bit GPU: PCI-e ATI Radeon HD 5570 1GB (Sapphire) --> See HD5570 reference in ATI components. RAM: Crucial, 3GB (1GB and 2GB dimm, asymmetrical. I'm Broke, okay?) --> OOB Onboard Graphics: Intel G3100 --> NOT TESTED USB 2.0 --> All Works OOB (plug, unplug anytime without KPanic) Ethernet --> Requires the kext under ethernet in custom install on iatkos, the Sleep --> Sleeps, Doesn't wake up (in other words, doesnt work, sleep kext no work) PS/2 --> NOT TESTED (using a mac USB keyboard w/ usb mouse, works fine) SATA --> Works OOB (Seagate 1.5TB partitioned 3 ways, 2 NTFS and 1 HFS+) IDE --> Works OOB (DVD Burner, Secondary HDD recognize/reads fine) PCI --> Works (Linksys a/b/g Wireless card recognized as Airport OOB) Audio (ALC 662?) --> Somewhat worked, crackly. Installed new VoodooHDA from recent multibeast, works fine.	attansicl1e.kext in iAtkos S3 v2 Installation Multibeast (Easybeast) Chimera 1.3 changed some strings in boot.plist (kflags-> arch=x64 -v) occasionally get KPs, usually on cold boots. (caused by broadcom wifi kext)	Yes	Yes
P5KPL	Intel G31+ICH7 SATA	Intel CPU Pentium E2200 2,2GHz Installation with IAtkos S3 V2 DVD (Snow Leopard 10.6.3) . Installed without problem. Fully operational Snow Leopard 32/64 bit. Installed Texera NTFS for NTFS Support. DualBoot Chamaleon RC5 with XP Profesional 32bits. Processor Intel Pentium Dual-Core E2200 2,2GHz (32/64bit) FSB 800MHz Nvidia 8500GT 512mb max resolution 1680x1050 pixels 2x2GB 800MHz RAM Kingston Audio ALC662 CODEC audio 6 channels Ethernet - PCIe Gb LAN Wireless a/b/g Atheros AR5005GS USB 2.0 IDE internal (I don't use it) Chipset G31+ICH7 SATA Hard Disk Samsung 320GB main disk SATA Seagate 500Gb LG DVD/CD rewriter Standard Mouse and keyboard usb 2.0 USB Bluetooth 2.1 After instalation, download MACosxupdcombo10.6.6.dmg. Install combo update. DO NOT RESTART! install Multibeast usb rollback to not to lose USB. After install restart. After restart download MACOSXupdcomboupd10.6.7.dmg. Install combo update. NO NOT RESTART! install multibeast usb rollback. MAKE SURE TO COPY OF mach_kernel, USB kexts and network kexts. After restart restore mach_kernel. And you should have already the new SNOW LEOPARD 10.6.7 64 bits. After restart: only way possible now to enter my osx86 is at Chamaleon RC5 booting, boot mac wit "-f ignoring cache" mode. After a cleaning of cache with ONYX you can start normally. Graphics at the begin disabled, so I entered from my XP (which is in the same Hard Disk) and modified boot.plist adding <key>GraphicsEnabler</key> <string>Yes</string> Restart and shutdown working 100%. USB working Graphics working at 80%. If you want graphics at 100% flash the rom from windows ms-dos. New Apple App store working 100% I tried to install webcam Genius but untill now didn't find working driver. Sata working fine.	Chamaleon RC5 Multibeast Ethernet attansicl1.kext to get working the ethernet. Sleepenabler.kext still doesn't work. After instalation updated all programs like safari and quicktime to the latest version without any problem.	Yes	Yes
P5K Premium/WiFi-AP	P35/ICH9R	Intel Q9400 CPU 2.66 GHz @ 3.66 GHz 8400GS (256MB) works fully with EFI-Strings from EFI Studio. 2x2GB 800 MHz Ram Audio - works with the latest Voodoo (Output and Inputs) Ethernet - Works Wireless b/g - Works (see patches column) USB - All Work IDE - ? ICH9R - Works Install Method: Retail Disk Image boot with myHack then Apple Software Update to 10.6.7 Shutdown/Reboot work 99.9% of the time.	Patches Realtek Wireless (RTL8187B) myHack (chameleon + other stuff) Audio (VoodooHDA) SleepEnabler.kext (10.6.5) Useful Tools OSX86Tools Kext Helper B7 Guide EFI Studio	Yes	Yes
P5K-E/WiFi-AP	P35/ICH9R	Intel Core 2 Quad Q9650 3.0 GHz @ 4.0 GHz 8800GT 512MB working with DSDT patch 4x2GB 1066 MHz RAM working with DSDT patch Audio - works with the latest VoodooHDA (Output and Inputs) Ethernet - Works using AppleYukon2Injector.kext Wireless b/g - not working in 64bits kernel USB - All Work IDE - not tested (should work using JMicronATA.kext) eSATA - not tested (should work using LegacyJMB36xSATA.kext) ICH9R - Works in AHCI Install Method: Retail Disk Image boot with Chameleon RC3 then Apple Software Update to 10.6.7 Shutdown/Reboot work 99.9% of the time with OSXRestart.kext	Patches Realtek Wireless (RTL8187B) 32bit only Chameleon RC3 Audio (VoodooHDA) famesmc.kext NullIntelCPUPowerManagement.kext PlaformUUID.kext AppleYukon2Injector.kext Most of the kext can be found here Useful Tools DSDT Patcher 1.0.1e Kext Helper B7 Guide Paragon NTFS for Mac OS X 8.0 (64bits kernel compatible)	Yes	Yes
P5K SE/EPU	P35/ICH9	Intel Core 2 Duo E8400 @ 3.62GHz GeForce 8800GT 512MB 2x2GB DDR2 Kingston HyperX Sony Optiarc AD-7243S USB keyboard USB mouse All works	DSDT + AHCI BIOS Mod Chamaleon 2.0 RC5 FakeSMC.kext VoodooHDA.kext - Audio AtherosL1Ethernet.kext - Ethernet AppleVIAATA.kext - ATA	Yes	Yes
P5B (2104 BIOS	P965/ICH8	Intel Core 2 Duo E6600 @ 2.4GHz ATI Radeon X1600 256MB 2x1GB Kensington 533MHz Samsung 500GB S-ATA drive front USB only works if legacy is disabled in BIOS Ethernet works OOB /w Realtek Gigabit Kext (MultiBeast) Use iBoot legacy to build and restart. Use MultiBeast for kexts etc. as shown in guide. Renew ATI Radeon x1600 Kexts /w new ones (search for it on google) and install /w Kext Helper. Start and install as shown in guide /w osx 10.6.0, update later. Use iBoot for boot, still looking for fix!	guide :iBoot + Multibeast	Yes	not tested
P5GC-MX/1333	Intel 945GC / Intel ICH7	Intel E5200 CPU 2.5GHz / 4GB DDR2 800 RAM iATKOS S3 V2 10.6.3 S-ATA: [OOB] /*Out Of the Box*/ Audio: VoodooHDA 0.2.61 (older version) installed using multibeast USB: USB very slow until AppleHPET.kext is deleted Ethernet: Not tested. VGA: GMA950 Not tested. Video fully working using XFX 8800GT and matching EFI. PCI Cards: PCI wireless card fully working with broadcom driver. Sleep Shutdown and Reboot: working 100% after moving USB|PS/2 5v. sleepenabler.10.6.7 required for deep sleep. Install Method: Installed iATKOS S3 V2 10.6.3 with all standard settings, but unchecked all sound drivers. Installed 10.6.6 combo update and before rebooting ran USB Rollback using multibeast (multibeast >> Drivers & bootloaders>>Kexts & enablers>> Miscellaneous>>IOUSBFamily Rollback.) Rebooted, installed 10.6.7 update and rolled back USB drivers again using multibeast method before reboot. After 10.6.7 update; installed VoodooHDA 0.2.61 using multibeast. Deleted AppleHPET.kext from system\library\extentions for USB to reach 2.0 speeds. Finally installed sleepenabler.10.6.7	Patches voodooHDA 0.2.61 sleepenabler.10.6.7 Useful stuff Multibeast	Yes	Yes
P5P43TD	P43/ICH10	Intel Dual Core CPU E5400 nVidia GT 220 1024Mb DDR3 4096Mb DDR3 RAM	Fakesmc dsdt	Yes	Yes
P5Q PRO	P45 ICH10R	Intel Core 2 E8400 3.6GHz ATi HD4850 4Gb DDR2 RAM 1Tb WD SATA BIOS settings: Storage config = AHCI Suspend Mode = S3 only Install Method: Followed the iBoot 3.0.4 directions here Opened multibeast Ran the 10.6.7 combo update Ran multibeast Chose the Easy install DSDT Chose the latest ATi driver Then reboot OOB: USB SATA as internal drives Startup/shutdown/reboot without iBoot cd ATi card is working with all resolutions after choosing the ATi driver in multibeast Needs work: Creative Audigy2 sound On board ethernet (Tried the iats L1 and L1e with kext helper b7, no luck)	*iBoot 3.0.4 Multibeast 3.7.2	Yes	Yes
P5Q3	P45 ICH10R	Intel Core2 Quad Q9550 2,83GHz nVidia 9800GT 1024mb 4Gb DDR2 RAM 1Tb WD SATA BIOS settings: Storage config = AHCI Suspend Mode = S3 only Advanced CPU settings = all disabled Install Method: DSDT patched from a winXP HDD Hazard 10.6.6i installed DSDT and Chameleon RC5 applied through Terminal SleepEnabler kext removed (caused panic) Boot Software Update AppleTyMCE kext removed (caused panic) Graphics Enabler = Yes in boot.plist OOB: USB SATA Ethernet Shutdown/reboot Video* *Required DSDT fix and GraphicsEnabler=Yes in boot.plist works: 1680x1050, QE/CI (according to post #19 here. Buggy: changing resolutions Needs Patch: Sound Firewire Sleep	DSDT	Yes	Yes
P5Q SE2	P45	Processor: Intel Core2Quad Q6600 Video: MSI N 460 GTX 1GB Ethernet: Onboard RTL8111C Sound: Onboard VIA VT1708S Storage: Intel ICH10 SATA; Marvell 88SE6102 PATA Installation: Used This HowTo with iBoot without any Causes. Installed this Videodriver	Sound with VoodooHDA	Yes	Yes
P5W DH	975X/ICH7R	Intel Quad Core Xeon GT240 (1024MB) DDR3 4096MB DDR2 1066MHz RAM Incremental Upgrade from 10.6.6 All works w/o issue		Yes	?
P5N-E SLI	NVIDIA nForce 650i SLI	Intel Core 2 Quad Q6600 IDE DRIVE & IDE DVD-RW 8GB RAM Nvidia GeForce 9400 GT	Follow this guide	Yes	Yes
P6T SE	X58/ ICH10R	Intel® Core™ i7-930, 2.8 GHz Audio works with Latest ALC1200.kext [1] Ethernet - works USB - Works GeForce GTS250 (1024MB) DDR3 8GB RAM Samsung DVDwbd SH-Bo83L ATA Device	Guide	Yes	Yes
P6T Deluxe V2	X58/ ICH10R	Intel Core i7-920, 2.66 GHz Audio works after update from 10.6.6 no need to run 10.6.x audio patch by Fabio and aschar Ethernet - works Wireless WMP300N card running in 10.6.6 by replacing the patched plist file inside of AppleAirPortBrcm4311.kext that resides in IO80211Family.kext When I ran the 10.6.7 update it didn't overwrite my I080211Family.kext so no loss of wireless USB - Works Palit Gtx 285 (1024MB) DDR3 - Works 6GB RAM SATA - Works with AHCI set in BIOS If your updating from 10.6.6 and you chose the installation method, no issues with the 10.6.7 update	Guide	Yes	Yes
Sabertooth X58	X58/ ICH10R	Intel Core i7-950, 3.06 GHz NVidia GeForce GTS 450 SATA - Works with AHCI set in BIOS 4 GB RAM Original install using Boot-132 v. 2 and Snow Leopard 10.6.3 Upgraded to 10.6.6 Used MultiBeast v. 3.3 to install iBoot, Audio, Network and Kext utilities Used NVidia installer Ethernet - works Audio - works Video - works (1920x1200 max resolution of my monitor)	Instructions from tonymacx86 except I used Boot-132 for booting	?	Yes
P5KPL/1600	Intel G31 / Intel ICH7	Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz nVidia Corporation G96 [GeForce 9400 GT] (rev a1) (Zotac) SATA - In BIOS set S-ATA and P-ATA mode SATA HDD Maxtor IDE DVD-RW set to master mode 2 GB RAM PS/2 Keyboard and USB Logitech mouse Build-in Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) Wi-Fi PCI card TP-Link 551G with Atheros Communications Inc. AR2413 802.11bg NIC (rev 01) Ethernet - works / Wi-Fi card - works Audio - works Video - works (1280x1024 max resolution of my monitor and 1024x768 on external TV), Quartz Engine works (tested on Dashboard waves) Installed 10.6.3, upgraded to 10.6.7	Boot from iBoot-legacy [2], then install iAtkos S3 [3] with Chamelion RC5 boot, GraphicsEnables 64 bit = Yes, PS/2 Keyboard, old logo boot, Network - Wireless - Atheros drivers, upgraded to 10.6.7 by using Apple Combo Update [4]	?	Yes
P6X58D-E (0303 bios)	X58/ ICH10R	Intel(R) Core i7 950 @ 3.07GHz nVidia Corporation GeForce 7400 GTX 256MB 1TB Samsung SpinPoint F3 SATA HDD, 32MB cache 6 GB Kingston HyperX PC3-12800 (1600MHz DDR3) RAM Dell Wireless USB Keyboard and Dell USB mouse Built-in Marvell Gigabit Ethernet Ethernet - works Audio - analogue works (only tested front-channel out), no SPDIF (optical not lit) Firewire - works USB3 - works Video - works Installed 10.6.3, upgraded straight to 10.6.7 SATA - works, but DVD drive will sometimes disappear after a reboot until machine is power-cycled. Sleep - works (POST after sleep disabled in BIOS otherwise screen stays blank)	VERY convoluted method of installation, stumbled along until it booted, including the use of a USB-SATA adapter for the initial install due to incompatibilities between iBoot/SL Retail and onboard SATA. If I need to reinstall I'll try and document a successful method, but the board DOES work. VoodooHDA 0.2.1 for audio (Apple one recognises audio but won't add as an output device) (MultiBeast) Customised AppleYukon2.kext for network (to add 88E8056 model) USB 3.0 (MultiBeast) Chameleon 2.0 RC5 r748 (MultiBeast) DSDT file from P6X58D Premium install zip file 0303 motherboard BIOS British keyboard layout patch (after installing, use System Preferences -> Language & Text -> Input Sources to enable them, and the flag up by the clock to select)	?	Yes
P5VD2-MX(not SE)		Intel(R)Pentium 4 3.06 GHz VIA P4M890 64MB(Works using GraphicsEnabler,but no QE/CI,resolutions) 250GB SATA HDD 2GB Kingston 800 MHz RAM DDR2 PS2 KeyBoard(works OOB),USB A4Tech X755FS,extra buttons doesn't work Via Ethernet,use Via Rhine II.kext Ethernet - works Audio:doesn't tested Video - works Installed 10.6.0 upgraded combo 10.6.3 than SoftUpdate 10.6.7 SATA - works Sleep - didn't tried Angry Birds-Works :D	Found the BEST install DVD on TPB,booted w/ iBoot Legacy,installed with the main things,nothing marked,than installed kexts from a Pendrive. USB works OOB,DVD drives either.	?	Yes
P7P55D-E	Intel P55 Express	Intel Core i7 870 2.93GHz 2x2GB - OCZ 3P1333LV4GK, Platinnum LV Grafik - Nvidia GeForce GTS250 Deep Green Audio - onboard VIA VT1828S patched with VoodooHDA.kext Ethernet - onboard Realtek RTL8112L patched with RealtekR1000SL.kext USB - All Work SATA - Works with AHCI set in BIOS (in Storage Configuration and Advanced > Onboard Device Configuration> SATA Controller) Shutdown and Reboot work Sleep works with 10.6.6 SleepEnabler.kext Install Method: LifeHacker method by Adam Pash iBoot, Retail disk, Combo Update to 10.6.4 then MultiBeast select EasyBeast and System Utilities before restart. Restart and patches. After patches, install ComboUpdate 10.6.7 and patch again. Install all Softwarepatchs and reboot. start osx with "-f -v -x cpus=1 arch=i386 pmVersion=21" reinstall easybeast and systemutilities, and copy extensions to /Extra/Extensionis (sleepenabler 10.6.6) Edit bootflags. add "pmVerion=21"	Patches All files on LifeHacker, FakeSMC, NullCPUPowerManagement, UpstreamDisabler, VoodooHDA, RealtekR1000SL Use 10.6.6 SleepEnabler instead add "pmVersion=21" to "kernel flags" at /Extra/com.apple.Boot.plist	?	Yes
P5QC	Intel P45	Intel Core 2 Duo E7400 2.80GHz (OC 3.75GHz) Memory - 2x2GB Crucial Ballistix, DDR3, 1333MHz Graphics - NVidia XFX GeForce 9800GT 512MB Audio - ALC1200 Ethernet - Atheros L1E USB - Works SATA - Works Shutdown and restart - Works (with DSDT patch) Install - Mac OS X Snow Leopard 10.6.6i by Hazard After install - 10.6.7 update	Patches N/A	Yes	Yes
P7H55D-M EVO	Intel H55	System: Intel Core i5-650, 4 GB RAM, 2 x 500GB Seagate HD SATA, GeForce GT 9500 1 GB Installation: iBoot (3.1.0) + Multibeast (3.7.3). Installed from the original Snow Leopard 10.6.0 DVD and then upgraded (via ComboUpdate) to 10.6.7. Multibeast: used the EasyBeast Install and applied the patches. No custom DSDT used. Monitor connected via DVI. Video: Out of the box Audio: VoodooHDA 0.2.72 (microphone not working) Ethernet: Lnx2Mac's RealtekRTL81xx USB: Out of the box SATA/IDE: Out of the box	Patches applied via Multibeast: VoodooHDA 0.2.72 Lnx2Mac's RealtekRTL81xx	Yes	Yes

Biostar

AMD CPU

Hardware Name	Chipset	Notes	Patches Used	32/64bit working with patches
TF7050-M2	GF7050 PV / NF630 (MCP68PV)	AMD X2 4200+ 2 x 1Gb DDR2 RAM @ 800Mhz VGA : onboard Geforce 7050 DVD-RW on SATA LAN : RTL8168B/8111 Audio: 7.1-CH HD ALC888 CODEC non ps2 keyboard & mouse Install Using: Snow Leopard 10.6.3 Intel only by iAtkos S3 10d573 Upgrade with Combo update 10.6.5 [5] Upgrade with Combo update 10.6.7 [6] After Update suspend restart, and you must change your old SleepEnabler.kext on /E/E or /S/L/E, with newer version [7] & Upgrade Kernel with legacy_kernel 10.7 [8] with kernel flag "arch=i386 -force64" at com.apple.Boot.plist, thanks for nawcom. You must patcher libSystem.B.dylib on /usr/lib/ and QuickTimeComponents on /System/Library/QuickTime/ QuickTimeComponents.component/Contents/MacOS/ [9], If you not patch, all 32bit .app can't run, thanks for AnV. Shutdown/Restart: Fully working BIOS setting: SATA AHCI enabled HPET enable Disable bit enable	/E/E folder : FakeSMC, NullCPUPowerManagement, Disabler, ElliottForceLegacyRTC, SleepEnabler, RTL8187Bl	yes	yes

Intel CPU

Hardware Name	Chipset	Notes	Patches Used	32/64bit working with patches
TH55B HD	Intel HD Graphics on H55 chipset	Intel Core i3 540 @ 3.07Ghz 2 x 2Gb DDR3 RAM @ 1600Mhz VGA : onboard Intel HD w/ 128MB shared + DVMT DVD-RW on SATA LAN : RTL8168B/8111 Audio: 7.1-CH HD ALC662 CODEC USB keyboard & mouse Install Using: iBoot + Snow Leopard 10.6.0 Upgrade with Combo update 10.6.3 After restart, you must use "-f -s PCIRootUID=1" Shutdown/Restart: Must use iBoot cd for bootloader; sleep not working BIOS setting: SATA AHCI enabled HPET enable		?	Yes

DFI

Hardware Name	Chipset	Notes	Patches Used	32/64bit working with patches
Lanparty UT X48-T3RS	X48/ICH9R	Intel Core 2 Duo E8400 3.00 GHz - 1x4GB DDR3 1333 MHz RAM Sapphire Dual Slot ATI 4850 (512MB DDR3) with 10.6.7 kexts and using Lizard tool - Works w/ CI-QE (no HDMI audio) Audio ALC889 (analog and digital ports w/ multichannel support) with DSDT editing - Works Ethernet (Dual Marvell Yukon Gigabit Adapter) - Works Bluetooth (USB dongle w/ Broadcom chipset) - Works USB - Works Firewire - Works SATA - Works (using AHCI mode inside BIOS) IDE - Works (see the used kexts) Bluetooth (D-link DBT-122 [Broadcom chipset]) - Works (no plist editing... Using with Apple Magic Trackpad) ICH9R - Works Install Method: Retail 10.6.3 DVD (using ModCD v0.3.1, copying chameleon files to boot partition) then updated to 10.6.7 via Apple Software Update Shutdown/Reboot work 99.9% of the time. Installed to 100GB striped RAID Set (RAID-0 via software)	Patches DSDT edit (HDEF patched) ElliottForceLegacyRTC.kext IOAHCIBlockStorageInjector.kext IOATAFamily.kext IONetworkingFamily.kext JMicron36xATA.kext LegacyAppleYukon2.kext NullCPUPowerManagement.kext TotallyFixStillWaiting.kext fakesmc.kext Useful Tools Chameleon 2.0-rc5 DSDT Editor and Patcher Lizard Kext Helper B7	Yes	Yes

Foxconn

Hardware Name	Chipset	Notes	Patches Used	32/64bit working with patches
P35A	Intel P35/ICH9	Intel Core 2 Duo E4500 2.2GHz, 4GB DDR2 NVIDIA GTX275 896MB DDR3 Both processors working with proper fix applied in DSDT.aml file (which is already done in my DSDT) or 6B3F1P40 modified BIOS by OriginalMACNUT, otherwise Cpus=1 fix must be enabled. ... Install ... 10.6.3 Retail DVD Install method - Installed Retail DVD from 8GB thumb drive ... Post-Install ... Bootloader - Chameleon-2.0-RC5-r643 Audio - modifed ALC888 or VoodooHDA Video - using DSDT patch, but also all other methods are working Ethernet - Works OoB SMC - FakeSMC rev.454 USB - Works 10.6.7. updated w/o any problem Sleep/Wakeup works properly with my DSDT Shutdown/restart working properly	DSDT + Foxconn P35A tool pack - (kexts, DSDT with install instructions + various tools and applications)	Yes	Yes

Gigabyte

Hardware Name	Chipset	Notes	Patches Used	32/64bit working with patches
GA-G31M-ES2L Rev 2.4 bios FH	ICH7	Intel Core 2 Duo 3.16Ghz 2 x DDRII Corsair Dominator 2GB XFX GeForce 9800 GT Seagate 650GB Sata 3 ASUS IDE DVD Burner Audio : 100% including INPUT Network : 100% Graphics: 100% with QE/CI Reboot, sleep : 100% working BIOS: Set SATA/IDE mode to "Enhanced". Set HPET mode to 64-bit. I also disabled the floppy drive port, the parallel port, and serial port. Gather everything you need ahead of time onto a USB stick. Install 10.6.3 Retail DVD using iBoot (note: are you getting a nasty "\ACPI"\ boot error? Naughty boy. You're not using a RETAIL dvd. Trust me on this. It DOES matter. Really, it does..) Copy everything from the USB stick onto your desktop (note: do now, as USB does not work in single user mode) Reboot, using iBoot again, this time use -x to enter single user mode (important, this prevents the combo update from crashing, which happens far too often) Run 10.6.7 Combo Update. Do NOT reboot yet. Use DSDT Autopatcher (get from Insanelymac). After trying non-DSDT methods, this is SO much easier and it just WORKS. Then use Multibeast: DSDT User install, AppleHDARollback, System Utilities Now use Kext Helper to install the following: Audio - Gigabytealc888b.kext and HDA Enabler Ethernet - AtherosL1Ethernet.kext (Video - is already taken care of by the DSDT) Sleep & Wakeup : Works without needing a kext.	DSDT Gigabytealc888b.kext AppleHDARollback HDA Enabler AtherosL1Ethernet.kext Audio files above are mentioned here: [10]	Yes	Yes
GA-P55A-UD3 v1.0 (BIOS F11)	Intel P55	Used hardware: Intel Core i5 750 2,66Ghz/DDR3 Kingston HyperX 1600Mhz/Gainward Radeon HD4850 512Mb (2xdvi + s-video)/Samsung Spinpoint F3 500GB/DVDRW Samsung 223C/Corsair TX750W Install method: In safe mode, iBoot -> 10.6.0 Retail -> Combo update to 10.6.7 -> Multibeast ( guide for help [11] ) Bootloader: iBoot Supported [12] + Multibeast [13] DSDT: from tonymacx86[14] Audio: Works using AppleHDA rollback in Multibeast + DSDT Video: Gainward Radeon HD4850 512MB (2xdvi + s-video) Installed with Multibeast (Kekst for ATI 48xx 10.6.6) Bios settings: SATA to AHCI (connect the drive to blue ports), HPET to 64bit and disable SATA port 0-3 native mode Ethernet: Lnx2Mac's Realtek RTL81xx.kext [15] Multibeast checked patches: UserDSDT, System Utilities, IOAHCI Block StorageInjector, ATI 48xx for 10.6.5 and USB3 NEC Renesas	DSDT for bios F11 from tonymacx86 [16] Lnx2Mac's Realtek RTL81xx.kext [17] IOAHCI Block StorageInjector (locate in MultiBeast) ATI 48xx for 10.6.6 (locate in MultiBeast) USB3 NEC Renesas (locate in MultiBeast)	Yes	Yes
GA-G41M-Combo	ICH7	BIOS updated : September, 06 2010 Intel Core 2 Duo 2.7 Ghz Memory : 2GB of Ram (DDR3) VGA : nVidia Geforce 8400 GS 512 MB Audio : Full working Network Full working Graphic Full working with QE/CI Monitor : Hp w1707 with connect by DVI Cable Hard Disk : Seagate 1TB	Installed 10.6 Retail by EmpriseEFI CD + Combo update to 10.6.7 Use Multibeast to Restore USB functions, installed fakesms.kext, and installed Chameleon RC5 R699, you can choice some different files if you need ) Bootloader - Chameleon RC5 or Chimera 1.1 (Tested on May 6, 2011) DSDT created by DSDT autopacher and it's so amazing :) Audio - Voodoo HDA 0.2.1 Modded to link from Speaker to PCM with Volume Control worked perfectly. Video - nVidia Geforce 8400 GS 512 MB (just only add GraphicsEnabler=y to com.apple.Boot file or you can using nVEnabler.kext) SATA - AHCI in BIOS (Set up default on BIOS) Ethernet - AtherosL1Ethernet.kext (the below link it's lastest version to fix any random kernel Panic). Sleep & Wakeup : Works no need to SleepEnable.kext ! Here all my file with GA-G41M-Combo: [18] (Found on 3 days to take full files)	Yes	Yes
GA-P55-UD3L Rev1.0	P55	Intel Core i5 760 2 x DDRIII 1333Mhz 2GB Crucial Galaxy nVidia 9500GT 1024MB Hitachi 1TB HDD SATA Sony 24X DVDRW SATA Everything works fantastic except sleep. FAST!	Easy Beast + System Utilities = Graphics: NVEnabler Network: Lnx2Mac's RealtekRTL81xx Ethernet ElliottForceLegacyRTC.kext EvOreboot FakeSMC Plugins IOUSBFamily Rollback NullCPUPowerManagement Audio: VoodooHDA-2.7.2 (KextBeast)	Yes	Yes
EP45-UD3LR	P45/ICH10R	Use Kakewalk 3.1 USB [19] Install Method;[20] 10.6.3 -> 10.6.5 -> 10.6.7 (Manual Update) Components: Intel Core2Quad E8400 2xWD Caviar Green 1TB SATA2 (RAID) Kingston DDR2 800MHz Zotac 9500GT Pioneer DVD-RW VIA VT6308 Firewire Card (Only 2nd PCI slot working)	ALC888 HDA Enabler All included in Kakewalk Package: DSDT fakesmc.kext JMicronATA.kext JMicron36xATA.kext	Yes	Yes
GA-H55M-D2H	H55	Use SL Retail + iBoot 2.7 + MultiBeast [21] Install Method;[22] 10.6.3 -> 10.6.7 (Manual Update) Components: Micr-OS.com Intel Core i3 540 Seagate 1TB SATA2 4 Go Transcend DDR3 1333MHz Nvidia GTS 450 GPU LG DVD-RW VGA Onboard Intel HD not working !	All included in Multibeast Package: DSDT fakesmc.kext JMicronATA.kext alcHDA.kext	Yes	?
GA-H55M-UD2H	H55	Use SL Retail + iBoot + MultiBeast 3.4 [23] Install Method;[24] 10.6.3 -> 10.6.7 (Manual Update) Components: [25] Motherboard Rev 1.3, F11 Bios Intel Core i5 760 Seagate 500 GB SATA2 Hard Drive Corsair XMS3 DDR3 1600MHz Memory - 8GB (4x2GB with 2x2GB installed during installation) PNY Nvidia 8400GS GPU Sony Optiarc DVD-RW UserDSDT Install (DSDT from database - [26]) Notes: Audio, Network, USB, Firewire, Sleep function 100% Video Card, QE-CI works 100% (DVI port used) with Graphics Enabler=yes, EFI strings in /Extra/com.apple.Boot.plist, DeviceID added to NVDANV50Hal.kext	Basic Bios settings: Load optimized defaults Integrated Peripherals: SATA control mode: AHCI. Power Management: HPET-mode: 64-bit Primary Boot Drive: CD/DVD (just for installation) All included in Multibeast Installer Package: User DSDT (with DSDT file on desktop) JMicron36xATA ALC8xxHDA AppleHDARollback IOAHCIBlockStorageInjector Lnx2Mac's RealtekRTL81xx	Yes	Yes
GA-945GCM-S2L	ICH7	Intel E2160 2 x DDRII 667Mhz 2GB VGA On Board Intel GMA950 Suppot QC/QE BootThink Pioneer DVDRW SATA Network: On Board RealtekRTL8168 Ethernet Audio: CT4620+KX	DSDT	Yes	Yes
GA-P55A-UD3	P55	Use SL Retail + iBoot 2.7 + MultiBeast [27] Install Method;[28] 10.6.3 -> 10.6.7 (Manual Update) Components: Micr-OS.com Intel Core i3 550 Seagate 1TB SATA2 8 Go Transcend DDR3 1333MHz Nvidia GT 430 GPU LG DVD-RW	All included in Multibeast Package: DSDT fakesmc.kext JMicronATA.kext alcHDA.kext	Yes	?
GA-G31M-ES2L rev2.3	ICH7	C2Q Q6600 2.4Ghz / 2x2GB Patriot / NVIDIA 9800GT / WD 500GB You can read full, detailed guide here: [29] Bootloader - Chameleon 2 RC5 build 699 Audio - ALC8xxHDA (+ 10.6.2 AppleHDA) Video - GraphicsEnabler=Yes AND PciRoot=1 in com.apple.boot.plist (graphicsenabler alone doesn't work) Ethernet - AtherosL1cEthernet.kext Shutdown, Reboot, Sleep works w/o SleepEnabler BIOS, Install method & DSDT - See guide linked above Method is the same as for 10.6.6 - after installation and configurations just update using SU to 10.6.7. IMPORTANT! GIGABYTE LIE ABOUT SOUND CARD! Reading serverals topics on boards I found interesting information: mb specs doesnt match hardware! More explaination in guide.	DSDT AppleHDA Rollback fakeSMC.kext AtherosL1cEthernet.kext ALC8xxHDA.kext	Yes	Yes
G41M-ES2L	G41/ICH10	Use Kakewalk 3.1 USB [30] Install Method;[31] 10.6.3 -> 10.6.5 -> 10.6.7 (Manual Update) Components: Intel Core2Quad E8300 WD Caviar Green 1TB SATA2 Kingston DDR2 800MHz Nvidia 8400GS GPU Samsung DVD-RW VIA VT6308 Firewire Card (Only 2nd PCI slot working)	All included in Kakewalk Package: DSDT fakesmc.kext JMicronATA.kext alc888b.kext	Yes	?
GA-P55A-UD7	P55	Rev:1.0 - Bios:F7 Use SL Retail DVD 10.6.3 + iBoot 2.7 + Combo Update 10.6.7 & Multibeast 3.3 Components Liste: Intel Core i7 875K @ 3,4Ghz Seagate 1TB SATA3 8 Go Transcend DDR3 1333MHz ATI HD 5770 SAMSUNG Bluray SH-B083 Onboard USB 3 Nec - eSATA and Firewire Works Good ! Realtek ALC889 Jack & SPDIF Works Perfectly All Works Perfectly !!!!!!	All included in Multibeast 3.3 Package: DSDT P55A-UD7 ALC8XXHDA + AppleHDA Rollback JMicron36xSATA + JMicron36xeSATA USB 3.0 - NEC/Renesas + Lnx2Mac's RTL81XX Chameleon 2.0 RC5 - ATI Experimental 32Bits + MacPro 5.1 After restart, Re-run MultiBeast and only select : Customization -> Boot Options -> 64-bit Apple Boot Screen	Yes	Yes
GA-P55A-UD7	P55	Rev:1.0 - Bios:F7 Use SL Retail DVD 10.6.3 + iBoot 2.7 + Combo Update 10.6.7 & Multibeast 3.3 Components Liste: Intel Core i7 875K @ 3,4Ghz Seagate 1TB SATA3 8 Go Transcend DDR3 1333MHz ATI HD 5770 SAMSUNG Bluray SH-B083 Onboard USB 3 Nec - eSATA and Firewire Works Good ! Realtek ALC889 Jack & SPDIF Works Perfectly All Works Perfectly !!!!!!	All included in Multibeast 3.3 Package: DSDT P55A-UD7 ALC8XXHDA + AppleHDA Rollback JMicron36xSATA + JMicron36xeSATA USB 3.0 - NEC/Renesas + Lnx2Mac's RTL81XX Chameleon 2.0 RC5 - ATI Experimental 32Bits + MacPro 5.1 After restart, Re-run MultiBeast and only select : Customization -> Boot Options -> 64-bit Apple Boot Screen	Yes	Yes
GA-EP45-DS3R	ICH10R	Intel Q9650 3 GHz / 4x DDR2 1066Mhz 1GB sticks OCZ / nVidia Asus EN8800ULTRA 768Mb / WD Caviar Black SATA 500 GB 10.6 or 10.6.3 Retail DVD + iBoot from tonymacx86 Audio (ALC889A) - ALC889A.Fix.kext inside this package Install guide used Kexts used 10.6.6. updated w/o any problem No sound		Yes	Yes
[GA-EP45-DQ6]	P45/ICH10R	Almost perfect Bootmethod: Bootthink 2.4.6 Install Method: 10.6.3 -> 10.6.5 -> 10.6.6 -> 10.6.7 (Manual Update) Components: Intel Core2 QX9650 SEAGATE 500G SATA2 Kingston DDR2 800MHz 2gbx2 Nvidia GeForce 9800 GT (1GB) Plextor PX-751A DVD R/W (IDE)	All included Package: DSDT fakesmc.kext IOAHCIBlockStorageInjector.kext NullCPUPowerManagement.kext HDAEnabler.kext LegacyHDA.kext VoodooHDA.kext (Audio) PlatformUUID.kext OpenHaltRestart.kext	Yes	Yes
GA-P55-UD3L Rev2.3	Intel H55	Intel Core i5 3.2GHz / 4x DDRIII 1333Mhz 2GB Kingston (8GB) / nVidia 9500GT / Intel X25-M G2 SSD 120GB Bootloader - Chameleon 2 RC5 Audio (ALC888) - VoodooHDA-2.7.1.pkg [32] Video - OOB (9500GT) SATA works All USB work Ethernet - used RealtekRTL81xx-0_0_67%2B.pkg [33] Shutdown, Reboot and work with no problem, Sleep does not work. BIOS - Rev2.3, 64bit HPET mode, AHCI Install Method: iBoot with 10.6.0 retail [34]. Started Multibeast and then run 10.6.5 Combo update. After 10.6.5 update finished did not restart but run Multibeast to make HDD bootable with Chameleon 2 RC5. Then installed the voodoo and realtek drivers for ethernet and sound. Fixed the vodoo gain issue (disturbing noise from sound card) by following these instructions: [35]. Install 10.6.6 and 10.6.7 updates. Backup before the updates with Time Machine - just in case :-) The 9500 GT can be calibrated with SpyderPro 2.3.1.		Yes	Yes
GA-X58-UD4P	Intel X58	Intel Core i7 920 @3.36GHz (3.2 osx) / 6x DDRIII 1333Mhz 2GB Kingston (12GB) / nVidia GTX 470 / OCZ Vertex 2 SSD 120GB used iBoot 3.01 + MultiBeast.. Multi beast settings user DSDT from tonymacx86.com for the board the bios version System settings to be refreshed, the second option Audio ALC8xxHDA Network RealtekRTL other hardware GPU, GTX 470 installed with the nvidia update from tonymacx86.. SATA works All USB work Shutdown, Reboot and work with no problem. BIOS - F13 Install Method: iBoot with 10.6.3 retail clone on USB, updated with 10.6.7 before MultiBeast installation with the setting above, then installed nvidia update, voila..		Yes	Yes
GA-945GCMX-S2 Bios F6i	ICH7	Use Hazard 10.6.6i update delta 10.6.7 Component Intel Core D 2.6 Ghz, VGA ON Board Intel GMA950, Seagate 500GB HDD SATA,LG 24X DVDRW SATA Bootloader - Chameleon 2 RC5 VGA On Board Intel GMA950 Not Suppot QC/QE Ethernet OOB ALL USB Work SATA Work	Audio (ALC888)[36] - VoodooHDA-2.7.1.pkg [37] OSX86Tools [[38]]	Yes	?
GA-P43T-ES3G	P43/ICH10	Rev 1.3, Bios F7 Components: Intel E6500 - Dual Core @2.93Ghz Kingston 99U5471-002.A00LF - DDR3 1333Mhz 2GB x 2 WDC WD5000AADS-00S9B0 - 500GB SATA 32MB cache Gainward Nvidia 430 GT - 1024Mb DDR3 All works perfectly, Including sleep.	Installed using retail 10.6.3->Combo Update 10.6.6->Combo Update 10.6.7 ( requiers re-install of 4xx driver and AppleHDA.kext ) Multibeast: UserDSDT GA-P43T-ES3G & HDEF ALC892 Patch ALC8XXHDA + AppleHDA Rollback Lnx2Mac's RealtekRTL81xx Ethernet I had to manually set customized nvcap, GraphicsEnabler=No and install tonymacx86's 4xx driver in order to work card with DVI. see Nvidia Section.	Yes	Yes
GA-MA69VM-S2 rev 1.0	AMD 690V + SB600 chipset	AMD Athlon 64 X2 4800+ (2.51 GHz) 2 x DDRIII 1333Mhz 1GB Crucial XFX HD 4650 1GB GDDR3 (0x9498) Samsung Spinpoint 1TB SATA Liteon 24X DVDRW SATA	Use the patches here Audio: VoodooHDA-2.7.2.kext for 10.6 (Download Here)	Yes	Yes
GA-X58A-UD3R rev 2.0	X58/ICH10R	Specs: Using BIOS version FF Intel Core i7 920 (2.67Ghz) 3 x DDR3 2Gb Gigabyte 1GB 5770 PCI-E Installation: Used iAtkos S3 with default customisations except all drivers turned off (i.e. no sound) Updated to 10.6.7 Installed Chameleon 2.0 RC5 - Prerelease, DSDT from database and drivers with MultiBeast 3.4 Restarted and it works almost flawlessly Notes: Audio, Video (including QE/CI, dual screens and proper resolution) and Network work 100% Haven't fixed sleep issue yet (won't wake up from sleep)	MultiBeast 3.4: UserDSDT Install (DSDT from database - link) System Utilties Lnx2Mac's RealtekRTL81xx Ethernet Chameleon 2.0 RC5 - Prerelease 32-bit GraphicsEnabler=No (haven't tried 64-bit yet) ALC8XXHDA and AppleHDA Rollback ATI 1.6.32.12 Drivers Chameleon theme as 2.0 RC5 doesn't include one (optional) OSx86 Software (optional but useful)	Yes	?
X58A-UD3R R.2.0	X58	*Intel i7 960, 6 gig tri channel (corsair), XFX 5870, Seagate 1 TB, LG GH20NS10, Sonata IV case I had to force the memory to 1600 via the BIOS 10.6.0 updated to 10.6.7 (I used a 9800GT to boot and update, 5870 wouldn't boot/display)	Booted using Kakewalk 3.0 (on disk) but the boot loader and DSDT weren't quite right when I installed I used Multibeast to install boot loader/video/audio/network/ drivers, DSDT from database (FE) I actually don't know what got the 5870 going, Chameleon or Chimera but it works now The sound was the only fiddly bit, I had make sure I removed any enablers from S/L/E then use Multibeast to apply the roll back and 889 driver	Yes	Yes
GA-X58-USB3	X58/ICH10R	Notes: Audio, Network work 100% Sleep works perfectly well.	Bios settings: Load optimized defaults Integrated Peripherals: ICH SATA control mode: AHCI. Port0-3 Native Mode: Enabled Power Management: HPET-mode: 64-bit Other: UserDSDT Install (DSDT from database - link)	?	Yes
EP43-UD3L	Intel P43	Intel Core 2 Duo / 2x DDRIII 666Mhz 2GB Kingston / nVidia 9500GT / WD HHD Bootloader - Chameleon 2 RC5 Video - OOB (9500GT) SATA works All USB work Shutdown, Reboot and work with no problem BIOS - 64bit HPET mode, AHCI Install Method: iBoot with 10.6.0 retail and MultiBeast: 1. Boot with iBoot. When booted then insert Retail 10.6 Snow Leo and press F5 when it spins up. Then select install from DVD. After installation reboot with iBoot one more time and then select installed OSX to start Snow Leo. Now just start MultiBeast and leave it there. Install 10.6.7 Combo update and do not restart. Back to MultiBeast now and select EasyBeast Install. Reboot. Now this messed my graphics card, network and sound which were working OOB before. Re-Run MultiBeast with Graphics Enabler and System Utilities selected plus ALC888 sound and Network Realtek drivers. Reboot after installation is finished and everything is working perfect.	Graphics Enabler, Sound ALC888, Network Realtek	Yes	Yes
GA-P55-UD3L Rev2.3 bios F1	Intel H55	Intel Core i7 2,9GHz / 2x DDRIII 1333Mhz 4GB Kingston (8GB) / ATI GIGABYTE 5770 DDR5 1GB / HARD DISK WD 1TB Bootloader - Chameleon 2 RC5 Audio (ALC892) - MULTIBEAST (Select in 10.6.7 drivers Realtek ALC8XX > ALC8XXHDA, APPLEHDA ROLLBACK and in non-dsdt hdaenabler select ALC892). Line green output ok line in OK. headphone front not work. Better than VODDOHDA. Video -5770 very compatible. This card is ok with drivers ATI and chimera in MULTIBEAST 3.4. Dual display ok with vga adapter to dvi. SATA works All USB work Ethernet - used RealtekRTL81xx-0_0_67%2B.pkg [39] Shutdown, Reboot and work with no problem, Sleep does not work. BIOS - Rev2.3, 64bit HPET mode, AHCI Install Method: iBoot with RETAIL 10.6.3. Use this guide Tonymacx86 http://tonymacx86.blogspot.com/2010/04/iboot-multibeast-install-mac-os-x-on.html%7C}. When update to 10.6.7 in multibeast select easybeast, chimera bootloader and some genreral ATI DRIVERS (don't remember exactly)		Yes	Yes
GA-P67A-UD7-B3​ bios F4	Intel P67	* Intel Core i7-2600k 3.4GHz / Corsair Vengeance Blu 16 GB PC3-12800 (16GB) / XFX ATI Radeon HD6870 DDR5 1GB / Intel 510 Series 120 GB SSD Bootloader - Chameleon 2 RC5 Audio (ALC889) - MULTIBEAST 3.7.1 (Select in 10.6.7 drivers Realtek ALC8XX > ALC8XXHDA, APPLEHDA ROLLBACK and in non-dsdt hdaenabler select ALC889). Make sure you connect the HD Audio port on the motherboard. To install the audio driver, start up MultiBeast and select only one of the Non-DSDT HDAEnabler drivers. Before you do this, go into /System/Library/Extensions and remove all the HDAEnabler*.kext files that you might have installed. Video: HD6870 drives dual displays connected to the two Mini DisplayPort. Two 27" NEC PA271W monitors with 2560x1440 resolution each. SATA works All USB ports work Ethernet - works out of the box Shutdown, Reboot and Sleep have problems. I need to shutdown the computer manually by holding the power button. Install Method: Use MultiBeast 3.7.1 with original Snow Leopard installation disk (10.6.0). Then run an online update. To be able to boot off the SDD disk, copy the mach_kernel from iBoot -> Preboot.dmg into /mach_kernel_chimera. Then modify /Extra/com.apple.Boot.plist to read like this: <dict> <key>Kernel</key> <string>mach_kernel_chimera</string> <key>Kernel Flags</key> <string>maxmem=16384</string> <key>Graphics Mode</key><string>1920x1200x32</string> <key>GraphicsEnabler</key> <string>Yes</string> <key>Timeout</key> <string>6</string> <key>Legacy Logo</key> <string>No</string> <key>GUI</key><string>No</string> </dict> The system uses an Areca ARC 1680 RAID 6 controller with 8 internal disks Hitachi Ultrastar 3TB Enterprise Hard Disks (total of 18TB usable disk space). Make sure in Preferences -> Energy Saver -> Allow power button to put computer to sleep is disabled. Putting the computer to sleep prevents Areca’s ARC 1680 firmware to be loaded properly when the computer is woken up from sleep. Make sure the filesystem you build on the RAID6 volume is not journaled.		Yes	Yes
GA-X58A-UD5 Rev 1.0 Bios F6	Intel X58 ICH10	* 2x DDRIII 1333Mhz 4GB Geil (8GB) + 2 x DDRIII 1333Mhz 2 GB Geil (4GB) / ATI GIGABYTE 5770 DDR5 1GB / HARD DISK WD 1TB Bootloader - Chameleon 2 RC5 Audio (ALC889a) - MULTIBEAST (Select in 10.6.7 drivers Realtek ALC8XX > ALC8XXHDA, APPLEHDA ROLLBACK and in non-dsdt hdaenabler select ALC889a). Line green output ok line in OK. headphone front not work. Better than VODDOHDA. Video -geforce 8800gt compatible. Dual display works with vga adapter to dvi. SATA works All USB work Ethernet - works Firewire - works Shutdown, Reboot and work with no problem, Sleep work. BIOS - Rev1.0, 64bit HPET mode, AHCI Install Method: iBoot with RETAIL 10.6.0. Use this guide Tonymacx86 http://tonymacx86.blogspot.com/2010/04/iboot-multibeast-install-mac-os-x-on.html . When update to 10.6.7 in multibeast select easybeast, chimera bootloader	*sleepenabler	Yes	no
GA P35-DS3P	Intel® P35 Express Chipset / ICH9R	PENTIUM D 930 SL88S 3GHz (works with 32 bit qoopz kernel) / 2x 2GB Kingston DDRII 800Mhz (4GB) / NVIDIA 7200GS 256MB / HARD DISK WD 1TB Bootloader - Chameleon v2 RC5 Audio (ALC889a) - voodoo HDA Video work after editing com.apple.Boot.plist file, dual display not tested. SATA work All USB work Ethernet work Shutdown, Reboot work with no problem, Sleep not tested. Install Method: iAtkos s3 DVD. Used this guide to install http://osx86.transformnews.com/?p=140		Yes	no

Intel

Hardware Name	Chipset	Notes	Patches Used	32/64bit working with patches
Intel DH67GD mATX (Sandy Bridge)	H67	64-bit only Integrated HD Graphics currently not supported	Custom Kernel required when using older bootloaders Vanilla 10.7.3 kernel only with Chimera 1.4 No DSDT editing required. For details follow this guide	No	Yes
Intel DG45ID	G45	Install Default installation of chameleon and activate USBBusFix=Yes	Chameleon 2.0 RC5 r730 sleepenabler.kext NullCpuPowerManager.kext fakesmc.kext Intel82566MM.kext VoodooHDA.kext VGA Not Support Yet and maybe Never	Yes	Yes
Intel DG31PR	G31	Install Default installation of chameleon and activate USBBusFix=Yes	Chameleon 2.0 RC5 r832 EvOreboot.kext NullCpuPowerManager.kext fakesmc.kext AppleRTL8169Ethernet.kext VoodooHDA.kext VGA Not Support Yet and maybe Never	Yes	Yes
D945GCNL	Intel D945 ICH7	Intel E6600 Core2 Duo - 2GB + 2GB DDR2 - GMA950 - AHCI Mode SATA Install Method: Retail Disk Image install on Hackintosh or Mac - Apple Software Combo Update to 10.6.7 - Chameleon 2.0 RC4 R684 - /Extra/Extensions GMA950 - Works Audio - works Voodoo Ethernet - works 10.4 - 10.6 compatible	DSDT.aml AppleACPIPS2Nub.kext ApplePS2Controller.kext fakesmc.kext IOATAFamily.kext IOUSBFamily.kext NullCPUPowerManagement.kext OpenHaltRestart.kext PlatformUUID.kext RealtekR1000.kext SleepEnabler.kext VoodooHDA.kext	Yes	No
D945GCL	Intel D945 ICH7	Intel E6400 Core2 Duo - 1GB + 1GB DDR2 - GMA950 - ATA Native Install Method: Retail Disk Image install on Hackintosh or Mac - Apple Software Combo Update to 10.6.7 - Chameleon 2.0 RC4 R684 - /Extra/Extensions GMA950 - Works Audio - works Voodoo Ethernet - works 10.4 - 10.6 compatible	DSDT.aml AppleACPIPS2Nub.kext ApplePS2Controller.kext fakesmc.kext IOATAFamily.kext IOUSBFamily.kext IONetworkingFamily.kext NullCPUPowerManagement.kext OpenHaltRestart.kext PlatformUUID.kext SleepEnabler.kext VoodooHDA.kext	Yes	No

MSI

Hardware Name	Chipset	Notes	Patches Used	32/64bit working with patches
G965M-FI	G965 / ICH8	Intel Celeron Dual Core E1400 nVidia GeForce 8400GS 256MB 1024MB DDR2-800 RAM x2pcs. Hitachi HDS721616PLA380 160GB SATA HDD HL-DT-ST DVDRAM GH20NS10 SATA SuperMulti Drive Realtek RTL8110SC Gigabit Ethernet Controller (Onboard) Realtek ALC883 HDAudio (Onboard) VIA VT6306 FireWire (Onboard)	Need to edit BIOS if you want to force AHCI. Fakesmc 10.6.5 ALC883 kexts [40] dsdt (USB/SMBus/LPC are injected to ICH10 series.)	Yes	Yes
H61MU-E35	Intel H61 (B3)	Intel Core i5 2800 Mhz Socket: 1155 Cpu type: Intel Core i5 2300 nVidia GeForce 7300 512 MB pci-e 4096MB DDR3-1333 RAM x2pcs. WD Caviar Green 2TB SATA2 64MB 7200rpm HDD Samsung SH-S223C SATA Black bulk Realtek 8111E(Onboard) Realtek ALC887 HDAudio (Onboard)	Need to update BIOS to 10.4 if you want to force AHCI. Fakesmc ElliotForceLegacyRTC EvOreboot IOUSBFamily Rollback no sound until AppleAzaliaAudio.kext or VoodooHDA	Yes	Yes
NF725GM-P31	Nforce 630a	AMD Phenom II X4 3.2 GHz nVidia GeForce GTS 250 512 MB pci-e 4096MB DDR3-1333 MHz.(but needs to boot with maxmem=2048 due to nforce kext bug) Seagate 500GB SATA3 16MB 7200rpm HDD Realtek ALC887 HDAudio (Onboard) Installed retail 10.6.0 using an existing Leopard install. Upgraded using 10.6.7 combo update. Do not restart after update. Replace kernel with modbin kernel.test7. Delete AppleHPET.kext and AppleCPUintelPowerManagement before restarting or else you will have a kernel panic or usb mouse will not work.	Need to disable USB legacy on BIOS Fakesmc Openhaltrestart PlatformUUID IOUSBFamily+IOUSBMassStorageClass from 10.6.0 VoodooHDA Medevil nVidiaATATest Modbin Kernel NullCPUPowerManagement	Yes	No
MS-7204 (MD8800 PC)	Intel I945P & ICH7	Intel Celeron D 3 GHz nVidia GeForce 8400GS 256 MB pci-e work with nvkush.kext (Or with Efi-String, NVDANV50Hal.kext with Device ID) 4096MB DDR2-800 MHz Ram) Fujitsu Siemens 500GB SATA2 Realtek ALC882 HDAudio (Onboard) Install Retail with Nawcom Boot CD, don't select VoodooHDA.kext (Kernal Panic) select AppleAzalia.kext delete AppleAzaliaAdio.kext Install 1st AppleHDA from this Page [41] run Kext Utility and restart. Sound is working now, also Frontpanel. SPDIF doesn't work. Install Legacy-Kernal 10.7.0 Update with 10.6.7 combo update. Install Chameleon 2.0 RC4	Need to select AppleAzalia.kext while installation, otherwise it gives a kernal panic (USB, SATA, IDE, Chipset, LAN) all devices work out of the Box After installation you have to Change Azalia with AppleHDA.kext from nawcom All Working, 64 Bit and 32 Bit, no Problems.	Yes	Yes

Graphics Cards

Please specify if your card is AGP, Integrated, PCI or PCI-E.
Also, place chip and board manufacturer in their respective column.

PCI-E

ATI

Model	Board-Manufacturer	Notes	QE	working Output	Dual display	32/64bit working with patch
HD 6870 1GB	XFX	Installed 10.6.0 + 10.6.7 updates with install instructions for iBoot and MultiBeast 3.7.1. Drives 2 monitors at 2560x1440 each connected on the two Mini DisplayPorts. Make sure to get quality cables, I use StarTech ones.	Yes	Mini DisplayPort and DVI	Yes	Yes	Yes
HD 5870 1GB	Sapphire	Installed 10.6.3 + 10.6.7 updates with install instructions for iBoot and MultiBeast -worked just fine using default settings from my user DSDT.	Yes	DVI	Yes	Yes	Yes
HD 5570 1GB	Sapphire	Installed w/ iatkos s3 v2, updated w/ 10.6.7 combo and graphics update and installed ati5xxx kext and other ati drivers that netkas and others recommended in a mid 2010 blog (worked on 32bit only supposedly), then repaired permissions and restarted, got a white/colorful scratchy screen (no luck). Then, downloaded/burnt iBoot to disc + multibeast w/ chimera 1.3 and now it works! GraphicsEnabler=Yes	Yes	HDMI(DPort)/VGA	Yes	Yes	Yes
HD 4850 512mb	Powercolor	DVI/VGA/HDMI version, display only on HDMI port. Installed with iAtkos v2 s3 + PC EFI 10.6. First boot with +x, update to 10.6.7 with Apple combo, reboot, launch Multibeast and install ATI 48xx Device Injector + ATI 48xx Patch + Apple Boot Screen (Boot options).	Yes	HDMI	Yes	?	?
HD 6850 1GB	Sapphire	Use Ati 68xx Package	Yes	VGA/DVI/HDMI	Yes	Yes	Yes
HD 6850 1GB	MSI PM2D1GD5/OC	Use HD 6850 PM2D1GD5/OC MSI MICR-OS.COM + Tuto Iboot 3.0.4 (Chimera 1.4.1) + Multibeast 3.7 de TonyMacX86 if GraphicsEnabler=Yes MSI 6850 works very well but only on DVI-D if GraphicsEnabler=No recognize as ATI HD NI40 but all port working. Gigabyte GA-P55A-UD7, i7-875K @ 3.6ghz, MSI 6850 PM2D1GD5/OC, 8GB Corsair XMS3 , Samsung Blu-Ray & DVD/RW, Seagte SATA3 1000GB MICR-OS.COM Cinebench : Open GL:36.68 & CPU:5.89, Xbench : 289.36	Yes	DVI-D	No/Yes	Yes	Yes
HD 5570 1GB (DisplayPort)	Sapphire	iBoot 2.7 & MultiBeast 3.4, Chameleon 2.0 RC5 r709 Sandy Bridge, GraphicsEnabler=Yes, EthernetBuiltIn=No. It was not simple getting this working, and I still cannot get signal restored to the DVI output after display sleep. Not for the faint of heart, at least not on a GA-G31M-ESL2.	Yes	DVI	?	Yes	Yes
HD 5570 1GB (VGA)	Sapphire	Newest I-boot and Multibeast. Upgraded from 10.6.0 to 16.6.7 using Combo update, removed ACPI_SMC_PlatformPlugIn.kext (located in the IOPlatformFamilyPlugIn.kext folder), then Terminal command: sudo touch /System/Library/Extensions (password), then ran system utilities from Multibeast and rebooted from I-boot. Next install Chimera v1.4.1, and run system utilities again, and reboot from hard disk.	Yes	VGA	?	Yes	Yes
HD 5750 1GB	HIS	Added Device and Vendor ID(0x068be1002) to ATI5000Controller.kext and used Vervet Framebuffer, HDMI Only with GraphicsEnabler=No	Yes	DVI/HDMI	Yes	Yes	?
HD 5770 1GB GDDR5	Sapphire	Only Chameleon 2.0 RC5 GraphicsEnabler=Yes	Yes	DVI	?	Yes	Yes
HD 5770 1GB	MSI	R5770 PMD1G Use HD 5770 MICR-OS.COM + Tuto Iboot 2.7 & Multibeast 3.3 de TonyMacX86	Yes	DVI/HDMI	Yes	Yes	Yes
HD 5770 1GB	XFX	HD 5770 (Dev ID: 0x68B8) is now natively supported in 10.6.7 using iBoot/MultiBeast/Chimera, full QE/CI with GraphicsEnabler=No! See following post for install information[42]	Yes	VGA/DVI/HDMI	Yes	Yes	Yes
HD 5770 1GB	Gigabyte	Use ATI 1.6.32.12 Drivers in MultiBeast 3.4	Yes	VGA/DVI/HDMI	Yes	Yes	?
HD 5770 1GB	Gigabyte	Radeon Ud HD 5770 850MHz 1GB 4.8GHz GDDR5 PCI-E (aka Batmobile) "Device ID: 0x68b8" Works OOB with Clean Retail SL 10.6.7 Install. Full QE-CI Functionality	Yes	VGA/DVI	?	?	?
HD 5670 512MB	HIS	iBoot 2.7 & MultiBeast 3.4	Yes	VGA/DVI/HDMI	?	?	?
5670 512MB	Sapphire	iAtkos (base install update to 6.7 using combo & MultiBeast 3.4	Yes	VGA/DVI/HDMI	Yes	Yes	Yes
HD 5670 1024MB	MSI	iAtkos L1	Yes	VGA/DVI/HDMI	?	Yes	Yes
HD 4650 1GB	Asus	LowProfile-Card; Use this Downloadpackage wich are Modified Lion Kexts + boot_vga [43]	Yes	DVI/VGA	?	Yes	Yes
HD 4650 1GB	XFX	Install the Kexts in this post	Yes	DVI	?	Yes	Yes
HD 5670 1GB	Asus	Installed (iboot retail) using experimental ATI option from multibeast and selection of MBP update graphics with 32 bit graphics enabler=yes	Yes	VGA	?	Yes	?
HD 5670 1GB	XFX	use kexts from Lion	Yes	DVI/HDMI	Yes	Yes	Yes
HD 5850	Sapphire	Retail installation of OSX 10.6.3, combo update to 10.6.7 and Multibeast. Choose Chameleon r748 ATI Experimental by Kabyl and 64-bit boot. GraphicsEnabler=No. I installed the ATI Graphics Update package, all video acceleration works excellent, including video playback. If hooking up to big screen (via HDMI), it defaulted to 1080i and this caused a slight latency in the picture, not sure why. Switched to 1080p and video/audio seem perfectly in sync. Be sure to visit the Underscan setting to fit the picture to your screen (you'll probably start off with the edges of your screen truncated).	Yes	All	Yes	Yes	Yes
HD 5450 512mb	Club3d	Displays only 256MB. Update to 10.6.7 and add this string to com.apple.boot.plist: <key>Graphics Mode</key> <string>1280x1024x32</string>	?	VGA	?	?
HD 5450 512mb	XFX	Install 10.6.3 from Retail and follow this [44]	Yes	VGA/DVI	?	?	?
Radeon HD 4870	Sapphire	Used iAtkos 10.6.3 S3 V2 with Graphic Enabler=Yes , and used EVO enabler (Used only EVO enabler no more kext needed for me) but if you are using gigabyte motherboard G31 or G41 chipset you need to use/choose pci1 kext too on the options in the installation	Yes/Yes/Yes	All	Yes	Yes	Yes

NVIDIA

Model	Board-Manufacturer	Notes	QE	working Output	Dual display	32/64bit working with patch
6600GS 256MB	Asus	GraphicsEnabler=Yes Add NVdarwin.kext Use 10.6.2 NVDA kexts, later kets do not support this card	Yes	Yes	DVI/VGA	Yes	Yes
7200GS 256MB		add this device proprties key to boot plist http://osx86.transformnews.com/?p=140#nvidia7200gs	Yes	DVI/VGA	?	Yes	No
7800GTX 256MB	nVidia	GraphicsEnabler=Yes	Yes	DVI	Yes	?	Yes
8400GS 256MB	Twintech	No kext needed. Full QE-CI using GraphicsEnabler=Yes	Yes	VGA	?	Yes	Yes
8400GS 256MB	EVGA	No kext needed. Full QE-CI using GraphicsEnabler=Yes If it doesn't work, like in my Hackintosh, use nvkush.kext	Yes	VGA / DVI	Yes	Yes	Yes
8400GS 512MB	Galaxy	Full QE-CI Functionality Chameleon v2.0 RC5-r699 or Chimera v1.4.1 r877 GraphicsEnabler=Yes Put device ID in to the NVDANV50Hal.kext and the Kernel Flags, arch=i386 PCIRootUID=1 into /Extra/com.apple.boot.plist Galaxy GF 8400GS PCI-E 512MB DDR2 64Bit	Yes	VGA/?	?	Yes	?
8400GS 512MB	EVGA	Add EFI string [45] Putting your device ID in to the NVDANV50Hal.kext and the EFI String into the boot.list EVGA Model 512-P3-1300-LR	Yes	VGA/DVI	?	Yes	Yes
8400GS 512MB	ASUS	Works OOB with Gigabyte G41M-ES2L (rev 1.1) Used nvEnabler on other mobo's	Yes	VGA/DVI	Yes	?	?
8400GS 512MB	PNY	Full QE-CI Functionality Add EFI string (EFI Studio) [46]* GraphicsEnabler=yes Put device ID in to the NVDANV50Hal.kext and the EFI String into /Extra/com.apple.boot.plist PNY Model VCG84512R3SXPB 8400GS R	Yes	VGA/DVI	?	Yes	Yes
8600GTS 256MB	BFG	tonymacx86 iboot functionality after install guide[47] with NVidia option. This includes GraphicsEnabler=Yes. Full QE-Cl.	Yes	DVI/DVI	Yes	Yes	Yes
8800GT 512MB	ASUS	Graphics Enabler=yes	Yes	DVI/DVI	Yes	Yes	Yes
8800GT 512MB	ASUS	Graphics Enabler=yes	Yes	DVI/DVI	Yes	Yes	Yes
9400GT 512MB	EVGA	Graphics Enabler=yes or EFI string	Yes	DVI/DVI	Yes	Yes	Yes
9300GS 512MB	Pixelview	Full QE-CI Functionality Graphics Enabler=no NVenabler64.kext Chimera boot loader	Yes	VGA/DVI	Yes	Yes	Yes
9600GSO 384MB	XFX	Full QE/CI with GraphicsEnabler=yes or EFI string	Yes	DVI/DVI	Yes	Yes	Yes
9800GTX+ 512MB	Gainward	Full QE/CI with GraphicsEnabler=yes or EFI string	Yes	DVI/DVI	No	Yes	Yes
GT 220 1024MB	ASUS	Graphics Enabler=yes or DSDT	Yes	DVI/DVI	Yes	Yes	Yes
GT 220 1024MB	Gigabyte	Works perfectly fine(1920x1080) only with "Graphics Enabler=yes"	Yes	VGA/DVI	Yes	Yes	Yes
GT 220 512MB	Gigabyte	Works perfectly fine only with "Graphics Enabler=yes"	Yes	VGA/DVI	Yes	Yes	Yes
GTS 250 1024MB Core Edition	XFX	No Kext needed QE/CI ok Using GraphicsEnabler=Yes Chameleon 2.0 RC5 Build 730	Yes	DVI/DVI/S-video	Yes	Yes	Yes
GTS 250 1024MB	EVGA	GraphicsEnabler or EFI-String	DVI/DVI/S-video	Yes	Yes	Yes	?
GTX 275 896MB	Palit	All Solution or GTX275 check here: [48]	Yes	Yes	Yes	Yes	Yes
GTX 285 1024MB	Palit	No kext needed. Full QE-CI using GraphicsEnabler=Yes	Yes	VGA/DVI/HDMI	Yes	Yes	Yes
GT 430 1024MB	Gainward	Works with the following combination: Fermi 4xx driver, Patched DSDT, Custom NVcap & GraphicsEnabler=No. Full QE-CI	Yes	VGA/DVI/?	?	Yes	?
GT 430 1024MB	Gigabyte	Fermi driver, Patched DSDT, Custom NVcap & GraphicsEnabler=Yes	Yes	VGA/DVI/?	Yes	Yes	?
GTX 460 1024MB	Gainward	Updated Nvidia Driver by tonymacx86 needed. Full QE-CI using GraphicsEnabler=Yes. Fix random freezes by playing a low-quality video in loop mode.	Yes	VGA/DVI/?	?	Yes	Yes
GTX 460 1024MB	PNY	Updated Nvidia Driver by Multibeast 3.06. Full QE-CI using GraphicsEnabler=Yes & PCIRootUID=1. Dual display and resolution working. Don't install NVEnabler.	Yes	DVI/DVI/HDMI?	Yes	Yes	Yes
GTX 480 1536MB	EVGA	EFIStudio GTX480 ONLY Tested with both Asus and Zotac GPUS	Yes	VGA/DVI/Yes	Yes	Yes	Yes

Network Cards

Wireless

• Apple AirPort Extreme Card
• Works OOB (OS X & Win7)
• 64-bit not tested, but works in 10.6.6; more info

Interface	Standard	Device	Manufacturer	Chipset	Notes	32/64bit working with patch
USB	b/g	Realtek RTL8187B	Realtek	RTL8187B	USB is built-in to P5K Premium Realtek Driver + Software Have to use poorly built Realtek software	Yes	No
USB	a/b/g/n	Sitecom WL-345	Sitecom		On the box there is print "Wireless USB Adapter 300N" Works OOB download driver for 10.6 Here link	Yes	Yes
USB	b/g/n150	Edimax EW-7811Un	Edimax	Realtek RTL8188CUS	Works in 10.6.7 but with vendor software. Download driver for 10.6.x: [49]	Yes	Yes
USB	B/G/N	N10	Asus		Drivers on CD and Asus site do not work. Instead download 8192SU drivers from Realtek site: Link After installation and reboot the Wireless Network Utility app from Realtek should show up (installed automatically in Applications folder). You must configure the card through here, _not_ through System Preferences/Network. You may get poor reception. A USB extension cable to distance the adapter from your computer may help.	Yes	Yes
PCI	b/g/n	WMP300N (v1)	Linksys	BCM43XNG N	EK/AU versions have the Atheros chipset, US versions Broadcom. This is for the Broadcom. It won't say on card so probe if unsure. Works great with patch to plist file. Got it up and running in 10.6.0. Every update except for the 10.6.6 to 10.6.7 I have had to repatch. how to patch the file - edit the contents of info.plist in AppleAirPortBrcm4311.kext by adding <string>pci14e4,4329</string> between strings ending 4328 & 432b This can be accomplished rather quickly through terminal, copy and paste sudo /Applications/TextEdit.app/Contents/MacOS/TextEdit /System/Library/Extensions/IO80211Family.kext/ Contents/PlugIns/AppleAirPortBrcm4311.kext/Contents/Info.plist add the edit and save. run sudo touch /System/Library/Extensions in terminal restart, go to system preferences/network and you will see your new AirPort card populate in the list of network connections. No firmware patching required. Wireless N works great.	Yes	Yes
USB	b/g/n	USB-N13	Asus	Ralink 2870 (?)	Newest driver from official Asus' site didn't work; newest driver from Ralink (V4.1.2.0) did. [50] Tested it on my 2010 MBP running 32-bit and 64-bit, using the Ralink wireless utility. During installation of the Ralink utility/driver, I got a Kext error, but it still worked.	Yes	Yes
PCI	b/g	WG311	NetGear	AR5212	Works if plugged in during installation of SnowLeopard from start to finish.	Yes	Yes
Mini PCI-E	b/g	GN-WI01GT	Gigabyte	AR5424	Works with IO80211Family.kext extracted from 10.6.5 Combo Update, newer versions drops connection. For details see: [51]	Yes	Yes
USB	b/g/n	TL-WN721NC	TP-LINK	AR9271	Not working	?	No
Mini PCI-E	a/b/g	DW 1490	Dell	Broadcom BCM94311MCAG	works OOB just like an original AirPort card note: if you've a ThinkPad notebook, you'll have to flash a custom BIOS in order to use the new WiFi card because Lenovo forbids the use of not authorized cards - read this thread here (German language)	Yes	?

Wired (Ethernet)

Interface	Standard	Device	Manufacturer	Notes	32/64bit working with patch
PCI	1000/100/10MBit	DGE-528T (DGL10028C)	D-Link	ID needs to be added manually into /System/Library/Extensions/IONetworkingFamily.kext/ Contents/PlugIns/ AppleRTL8169Ethernet.kext/Contents/Info.plist : <key>IOPCIPrimaryMatch</key><string>0x43001186</string>	Yes	Yes

Sound Cards

Interface	Hardware Name	Manufacturer	Notes	32/64bit working with patch
USB Headset+Microphone	BlackWire C220; Plantronics	Works OOB, no patch needed (select device from the Sounds panel in system preferences), "Vanilla" install of OS X recommended for OOB functionality. will supply kext if your OSx86 release (iATKoS, iDeneb, etc) lacks the kext
PCI	SB-Live Value	Creative Labs	Works with kxProject audio driver. Simple install, mount the dmg and run easy installer. [52]	Yes	Yes
PCI	Delta 1010	M-Audio	Works with Envy24 audio driver. MIDI reported not to work. Go to [53] and download "Envy24_SL.0.22.dmg". Then mount and install, donate if you can.

Bluetooth

Type	Item Description	Manufacturer	Notes	32/64bit working with patch
USB	BTD-123	Gembird	Officially supports Mac OS X (There is no Mac logo on the packaging now, since it has been redesigned, but the dongle is still the same). Tested with Apple Magic Mouse, cell phone and PS3 Controller. Works perfect.	Yes	Yes
USB	RF-FLBTAD	Rocketfish	Works OOB with Bluetooth Mouse & Apple Keyboard. (Auto re-syncs but wake from sleep grayed out.)**EDIT** Following this guide [54] wake from sleep issues can be easily fixed!	Yes	Yes
USB	BTD211	AZiO	Works OOB with Bluetooth Mouse & Apple Keyboard.	Yes	Yes

Other Accessories

Type of Accessory	Item Description	Manufacturer	Notes	32/64bit working with patch
USB TV Stick	Terratec T3	Terratec Works OOB in all releases of MacOS (Retail,Kaliway iDeneb) with EyeTV and EyeTv Lite Works also on the iPad connected to hackintosh via wireless (EyeTv app)		Yes	Yes
USB stereo speakers	Stereo speakers	Connectland	No Patching Required	Yes	Yes