HCL 10.7.1

From OSx86
Jump to: navigation, search
OS X 10.7.1
Hardware Compatibility

This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for 10.7.1 builds only.

For how to edit the Wiki, please see this thread. Thank you!

You're looking for an Installation guide? see here

Contents

[edit] Motherboards

[edit] Asrock

| H55M-LE |System Configuration:

  • Core I3 540 3.06 @ 3.70 Ghz
  • 8 GB 1333 Mhz (2x4GB Kingston)
  • XFX Geforce GT240 512Mb. DDR3 Full work
  • 320 SATA
  • Install Method:iAtkos L1 desde DVD Booteable

Enable Graphics VGA: Full Lan: Full Sonido: Full SATA: Ok Apagado y Reboot: OK |Icon U.png |Tick.png |-

[edit] Asus

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
P5B-VM G965/ICH8 Hardware:
  • ASUS Pundit3
  • Intel Core 2 Duo E4500 @ 2.20 GHz
  • 2 GB 800 MHz CL5 DDR2 SDRAM
  • Intel GMA X3000
  • 80 GB IDE HDD
  • 200 GB SATA HDD
  • Samsung SATA SuperDrive

Install Method:

Components Status:

  • VGA: ok
  • Audio Out (R/F): ok/ok
  • Audio In (R/F): X/X
  • USB (R/F): ok/ok
  • FireWire (R/F): ok/??
  • Ethernet: ok
  • Card Reader: ok
  • SATA: ok
  • IDE: ok
  • eSATA: ??
  • Shutdown and Reboot: ok
  • Sleep: ok
BIOS-Configuration:
  • JMicron controller: AHCI
  • ACPI Suspend Type: S3 only
  • Legacy USB Support: Disabled

Installer Customization:

  • Chameleon 2.0
  • FakeSMC
  • JMicron IDE
  • VoodooHDA v2.7.3
  • Realtek RTL81xx

Remove AppleIntelGMAxyz, AppleIntelHDGraphics and AppleIntegratedFrameBuffer, then:

MultiBeast:

  • System Utilities
  • Chimera v1.5.4
  • 32-Bit Apple Boot Screen
  • EvOreboot

KextBeast:

and Reboot!

Tick.png
P5K Premium/WiFi-AP P35/ICH9R System Configuration:
  • Intel Q9400 CPU 2.66 GHz @ 3.66 GHz
  • 8400GS (256MB) works fully with GraphicsEnabler=y
  • 2x2GB 800 MHz Ram
  • Install Method: Retail Disk Image boot with myHack, then Apple Software Update to 10.7.1

Components Status:

  • Audio - Built-in untested, but USB HiFis works
  • Ethernet - Works
  • Wireless b/g - Works (See patch column)
  • USB - All Work
  • SATA - All Work
  • IDE - Untested
  • E-SATA - Untested
  • Shutdown/Reboot work 99.9% of the time.
Patches
<key>EthernetBuiltIn</key>
<string>Yes</string>

Useful Tools

Tick.png Tick.png
P6T SE X58/ ICH10R System Configuration:
  • Intel Core i7-920, 2.66 GHz
  • Audio works
  • Ethernet - works
  • USB - Works
  • Gygabyte Geforce Gt 430 1Gb DDR3 full QE/CI
  • 6GB RAM
Guide
  • Install Method: Install Mac OS X Lion.app (USB Image) and LIONIZE
Tick.png
P6X58D-E X58/ICH10R System Configuration:
  • Intel Core i7-950
  • Audio - Works (Voodoo 2.7.2)
  • Ethernet - works (Yukon2 kext)
  • USB - Works
  • USB 3.0 - Works
  • Video Card MSI GTX470 - Works (Injector)
  • 12 GB RAM
  • Install Method: Unibeast (no need to disconnect drives or USBs or monitors)
  • BIOS Version:407; Revision: Unknown
  • Audio: ALC889, Voodoo 2.7.2
  • LAN: Marvell 88e8056 (Yukon2 kext)
  • SATA & IDE: Works, no patches 4TB raid on Marvell controller+hard drives on ICHR10 OK
  • Optical Drive: LG DVDRW (not used)
  • Shutdown works, haven't tried to sleep.
Tick.png Tick.png
P7P55D-E PRO P55 System Configuration:
  • Intel Core i5-760
  • EVGA GeForce 9500 GT 1GB
  • Install Method: xMove
  • Audio - Works with VoodooHDA
  • Ethernet - Works with Lnx2Mac's Realtek RTL81xx driver
  • USB 2.0 - All Work
  • USB 3.0 - Untested
  • FireWire - Working
  • SATA 3 GB/s - All Work
Patches
Audio: VoodooHDA
Ethernet: Lnx2Mac's Realtek RTL81xx driver
Tick.png Tick.png
P5K-VM Intel G33/ICH9R System Configuration:
  • BIOS- 1001 with BlackcH boot screen mod
  • Intel Q6600 CPU 2.24 GHz @ 2.76 GHz
  • ASUS 8600GT (512MB) works fully with NVEnabler64.kext
  • 4x2GB 800 MHz Ram
  • 160GB sata boot HDD
  • 500GB sata Time Machine
  • Install Method: Install from 8GB USB using this method [1], then Apple Software Update to 10.7.1( uncheck security update causes a KP) No DSDT needed

Components Status:

  • Audio - Built-in works with VoodooHDA 2.7.2, PKG [2]
  • Ethernet - Works
  • USB - All Work
  • SATA - All Work
  • IDE - Works
  • Firewire - Not Yet
  • Bluetooth- Dlink DBT 122 via usb
  • Apple Trackpad Works-100% All Gestures Available
  • ShutDown, Restart, Working 100 % with EVoreboot. kext.
  • Dual Boot With Snow Leopard 10.6.7 100% working
  • All Parts Second User And Sourced From EBAY Total Cost Including AOC F22+ FULL HD monitor £280 ($435)
Patches
  • BlackCH P5K VM Boot CD For Extentions / Extra For Both

Voodoo HDA 2.7.2, EVoreboot.kext, NvEnabler64.Kext by Krazabu Chameleon v2.1 svn r1506 pkg Useful Tools

Icon U.png Tick.png
P5K-VM Intel G33/ICH9R " System Configuration "
  • BIOS 1001
  • Intel Core2Duo E8400@3.00 GHZ
  • Nvidia 9500 GT 1024 MB
  • 250 GB System HD
  • 1 TB Time Machine and Storage
  • Install Method: [3]
  • Audio - Works
  • Sata - Works
  • Firewire - Works
  • USB - Works
  • Video - QE/CI Works
  • LAN - Works
  • Bluetooth - Apple Bluetooth Module
  • Trackpad and Magic Mouse 100% working
  • Restart and Shutdown working 100%, Sleep need PleaseSleep.app
Patches
  • ALC883 patch, NVEnabler64.kext, DSDT needed
Tick.png Tick.png
P5Q Deluxe Intel P45 / ICH10R Intel Core 2 Duo E7400 CPU 2,8GHz
  • MSI NVidia Geforce 9400GT 1024Mb
  • 4 x 1GB 800 MHz Ram Corsair
  • Update from existing 10.6.8 (TonyMac´s MultiBeast)
  • Install Method for 10.7: TonyMac´s xMove + MultiBeast, update over my existing 10.6.8
  • followed TonyMac´s instructions. After installation of 10.7, deleted "Extra- Folder" from 10.6.8 completely, dsdt.aml and everything, installed new MultiBeast without any additional Kext´s.

Left only skge.kext for LAN (only the fastest Lan-Port of the two ports works) and voodooHda.kext for audio (from10.6.8) inside System/L/Extensions, deleted NV64Enabler for graphics. System runs perfect only with the two additional Kexts.

  • Updated to 10.7.1 .... now to 10.7.2
  • Shutdown and reboot work fine. Sleep does not work. Update was very easy without ruining my existing 10.6.8, with which I had been dissatisfied (better leave your System to 10.6.7)
Patches
  • skge.kext, voodooHda.kext, no dsdt

forgot to mention that I changed the BIOS long time ago with p5q-asus-deluxe-2201-mac-dsdt.rom update1/2012: changed BIOS again to the newest original ASUS-Bios - ok

Tick.png Tick.png
P5Q Deluxe Intel P45 / ICH10R Intel Core 2 Duo Q6600 CPU 2,4GHz
  • Club3D nVidia Geforce 9800GT 512MB
  • USRobotics AirforceOne USR5411 (Broadcom BCM4318)
  • 2 x 2GB 800 MHz Kingmax, 2 x 2GB 1066MHz G.Skill
  • Installed iAtkos 10.6.3
  • 10.6.6 Combo Update
  • followed TonyMac´s instructions (xMove + Multibeast (only DSDT + Chimera).
  • Updated to 10.7.1
  • Even the sleep works (didn't work in Snow Leopard).
Patches

For Snow Leopard

  • default iAtkos
  • Intel SATA
  • Broadcom
  • NVEnabler

For Lion

  • Universal Voodoo HDA for sound

Tick.png Tick.png
P7H55D - M EVO INTEL H55 System Configuration:
  • CPU: Intel Core i3
  • GPU: Nvidia 9500GT 1GB(Out of Box)
  • RAM: 2x2GB DDR3 Corsair 1600Mhz
  • HDD: Seagate SATA (AHCI mode)
  • Keyboard: USB
  • Mouse: Magic Mouse
  • Dual Monitors using VGA and DVI from Single Video Card

Component Status:

  • All works

I used tonymac method to install the Lion (Snow Leopard working + xmove). Downloading 10.7.1 from Mac App Store did not present any issues.

Patches
  • Chimera (from MultiBeast) + arch=x86_64

VoodooHDA from Multibeast. Edit .plist for Voodoo to reduce gain at boot.

Tick.png Tick.png
P7H55-M Intel H55 System Configuration:
  • CPU: Intel Core i5 760 @ 4.0GHz
  • Video: Palit Geforce GTX 460 1GB
  • LAN: Onboard
  • Sound: Onboard
  • Storage: H55 SATA
  • Keyboard: Logitech K120
  • Mouse: Razer Imperator
  • Bootloader: Chimera 1.6

Install Method: iAtkos L1

  • GraphicsEnabler=Yes
  • Fake SMC
  • Disabler
  • RTC
  • Realtek RTL81XX
  • ALC8xx
  • ALC887/ALC888b
  • PS/2
  • Sleep Enabler 10.7.1 link
Tick.png Tick.png
P8H61M-LE B3 Intel H61 (B3) System Configuration:
  • CPU: Intel Core i3 2100 @ 3.1GHz
  • Video: Intel HD Graphics 2000
  • LAN: Onboard
  • Sound: Onboard
  • Storage: H61(B3) SATA
  • Keyboard: Logitech Wireless MK300
  • Mouse: Logitech Wireless MK300
  • Bootloader: Chameleon 2.0

Install Method: iAtkos L1

  • GraphicsEnabler=Yes
  • Built-in Ethernet
  • Fake SMC
  • Disabler
  • RTC
  • ev0reboot
  • Sata/ide: AHCI SATA other
? Tick.png
P8H67-M Pro Intel H67 B3.0 Revision

System Configuration:

  • CPU: Intel Core i5-2310 2.9GHz Quad Core
  • GPU: Nividia GeForce 8600 GTS 256MB VRAM
  • RAM: AVEXIR DDR3-1333 2GB X3
  • LAN: Onboard
  • Sound: Onboard
  • Keyboard: COMPAQ Wired PS/2
  • Mouse: Razer Naga MMOG Wired USB

Install Method:

  • Downloaded iAtkos_L1.dmg
  • Burned iAtkos_L1.dmg to 4.7GB DVD+RW using Transmac on Windows 7
  • Installed

System Status:

  • Audio(2.1 8-Channel),Graphics(Multiple Monitors),LAN,Keyboard,Mouse 100% Functional and Correctly Identified

BIOS Configuration:

  • SATA AHCI
  • DVD Boot Priority

Installation Patches:

  • GraphicsEnabler=Yes
  • Built-in Ethernet
  • Fake SMC
  • Disabler
  • RTC
  • ev0reboot
  • Sata/ide: AHCI SATA other

MultiBeast - Lion Edition:

  • EasyBeast Install
  • System Utilities
  • Kext for Non-DSDT HDAEnabler ALC892
  • Kext for USB 3.0 - NEC/Renesas and Etron
  • Kext for PS/2 Keyboard/Mice and Trackpads
  • Kext for Realtek Gigabit Ethernet 2.0.6 for 10.7
  • SSDT i5
Tick.png Tick.png
P8Z68-M Pro Z68 System Configuration:
  • CPU: Intel Core i5 2400 @ 3.1GHz
  • GPU: ATI 6850 1024 MB
  • RAM: 2x4GB DDR3 G.SKILL CL9 RipjawsX
  • Keyboard: USB
  • Mouse: Logitech MX518

Components Status:

  • All works,sleep, wakeup, shutdown, restart, USB3.0 not tested
Patches
  • Kexts for Lan ( Realtek Gigabit Ethernet 2.0.6 for 10.7 ), Sound ( ALC8xx HDA ) and 3rdParty Driver installed with Multibeast Lion edition
  • DSDT and SSDT
  • Patched AICPUPM.kext for Speedstep from InsanelyMac
  • Modded Bios for P8Z68-M Pro
Tick.png Tick.png

[edit] Biostar

Hardware Name Chipset Notes Patches Used 32/64bit working perfect
T5-XE Intel P55
  • Intel Core i7 860 @ 2.80ghz
  • NVIDIA 9800GTX+ 512 MB
  • 4GB RAM DDR3 1066Mhz
  • Install method - iBoot + Snow Leopard USB
  • Update to 10.7.0 from tonymac's method. 10.7.1 from software update.
  • Audio - Works
  • Video - Works
  • Ethernet - Realtek kext from multibeast.
  • Sleep/Wakeup - Not working (No sleepenabler though, havent tried.)
  • Shutdown/restart - Works OOB
  • Audio - VoodooHDA
  • Video - Kext from multibeast
Tick.png Tick.png

[edit] Elitegroup

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
G31T-M LGA 775
  • Pentium DC E5200 OC'd @ 3.2 GHz
  • Flashed ECS G31T-M (see 10.5.6 HCL)
  • 2 GB Ram

My method of install was Niresh12495-Lion, Google it. After I gathered everything necessary for the install, I restored the Niresh image (Its untouched, maybe slight modifications to the install disk, but everything for the most part is pure Lion and Vanilla, there are no kexts or anything included with the install) to a restore partition I created, and used the tools that came with it all to make it bootable. TIP: The boot loader theme it comes with is really nice, but Niresh added a picture of himself to selection screen, so after you make the drive bootable you'll want to go into the /Extra/Themes folder of the Restore drive you just created and change the "background.png" with something you like. I personally got an un-modified version of the one that Niresh put his picture on.

Continuing on, my GPU (An HIS Radeon 4670) which is another really-uncompatible piece (Just my luck) works perfectly with Snow Leopard after updating to 10.6.8, but in Lion it requires a DVI to VGA plugged into the DVI slot and then just Plug your Monitor's VGA into the VGA slot on your card (not the DVI to VGA). At least it gets Full QE/CI!

Ethernet, unlike snow leopard, does NOT work out of the box and neither does sound. But Luckily, Realtek has released kexts for mac. You'll want the OS X drivers for
RTL8102E(L)/RTL8101E/RTL8103T
RTL8401/RTL8401P/RTL8105E
RTL8402 Realtek 8101E
just scroll all the way down until you see their OS X download Links. For sound you need ALC662 which can be Downloaded here, they're for GA-945GCM-S2L (It will still work for our ECS G31T-M) Double-Click and Install "Azalia 12.0.5" Only.

After Installing the Ethernet drivers, AppStore still won't work, It returns an error that computer or device is not "valid". To fix this I followed someones pretty quick, simple guid. Here's the post.

Lastly but definitely not least, It updates through software update with NO problem like a real mac!! Just a note from previous experiences, If you ever do update and can't get back in (no screen, or garbled) then try getting in with safe mode (-x at boot) as something may have gone wrong with your GPU kexts from the update. Hope this works for you! Good Luck!

Tick.png Tick.png
H55H-CM[4] H55 System Configuration:
  • Intel Core i3 550 @ 3.20 GHz
  • Nvidia 9800gt ECS edition works fully with NvEnabler
  • 3x4GB=12Gb 1333 MHz Ram
  • Install Method: Retail USB Disk Image Lion 10.7 + update 10.7.1
  • Audio - ACL662 Works!
  • Ethernet - intel82578 Gigabit LAN Controller Works!
  • USB - All Work
  • SATA - All Work
  • IDE - No Support
  • E-SATA - Untested
  • Shutdown/Reboot work 100% of the time.
  • Non used DSDT.
Patches
  • Audio(voodooHDA),LAN & Graphics (NvEnabler)[5]
  • Chameleon VS [vs.html ]
Tick.png Tick.png

[edit] Foxconn

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
P35A Intel P35/ICH9
  • BIOS updated : 6B3F1P43
  • Intel Core 2 Duo E4500 2.2GHz
  • NVIDIA GTX275 896MB DDR3
  • 4GB RAM DDR2 1066Mhz
  • Install method - Installed from 8GB thumb drive
  • Update to 10.7.1 by using Software Update
  • Audio - Works
  • Video - Works
  • Ethernet - Works OoB
  • Sleep/Wakeup - Works
  • Shutdown/restart - Works
Tick.png Tick.png
H67M-S-B3 Intel H67
  • BIOS updated : A48F1016
  • Intel Core i7 2600K 3.4GHz
  • Intel 510 Series SSDSC2MH250A2K5
  • ASUS EN210 SILENT/DI/512MD3(LP) (GeForce GT210 512MB)
  • Kingston KVR1333D3N9/4G (DDR3 PC3-10600 4GB) x 4
  • Bootloader: Chameleon-2.1svn-r1518 with GraphicsEnabler=Yes, GenerateCstates=Yes, GeneratePstates=Yes, No Kernel Flags
  • Update to 10.7.1 by using Software Update
  • Audio - Not Working
  • Video - Works (VGA / DVI / HDMI)
  • Ethernet - Works with official driver version 2.0.6 from Realtek
  • Sleep/Wakeup - Not Working
  • Shutdown/restart - Works
  • eSATA - Not Working
  • USB3.0 - Not Working
  • Extra Lion DP4.pkg
Tick.png Tick.png
G41MXE-V Intel G41/ICH7 Install method: iATKOS L1 Updated BIOS first, disabled legacy USB support
  • Foxconn G41MXE-V LGA 775 Intel G41 Micro ATX Intel Motherboard
  • Intel Celeron E3400 Wolfdale 2.6GHz 1MB L2 Cache
  • 4GB ram
  • EVGA GeForce 8600 GTS 512MB
  • All defaults in configuration except I selected realtek ethernet drivers, nvenabler
  • Sleep not working OOB, it seems. Don't care to try to fix it
  • Shutdown/restart working
  • Audio working
  • Good picture over DVI on my 1080p monitor + second monitor
  • Running synergy client so I can use my keyboard/mouse from my main windows box. Highly recommended - just move mouse across to mac screen. Double click broken in beta client on lion; use stable.
NVEnabler, realtek kext in iAtkos L1 ? Tick.png

[edit] Gigabyte

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
GA-H55-USB3 v2.0 H55 Install method Kakewalk 4.0 for Gigabyte Motherboards + Snow leopard 10.6 retail dvd + combo update 10.6.8 and Multibeast easybeast + xMove + 10.7 ( lion ) update
  • BIOS FC
  • Intel Core i3-540
  • Memory: 12 GB (2x2GB and 2x4GB) Kingston DDR3 RAM
  • VGA: Apple OEM nVidia 7300 GT Pulled from Mac Pro
  • Audio : Full working with applehdaudio rollback
  • Network Full working
  • Graphic Full working
  • USB3 working with MultiBeast installed drivers
  • Gigabyte SATA3 working fine
DSDT Tick.png Tick.png
GA-X58A UD7 Rev.2 X58/ICH10R Install method Kakewalk 4.0 for Gigabyte Motherboards + Snow leopard 10.6 retail dvd + combo update 10.6.8 and Multibeast easybeast + xMove + 10.7 ( lion ) update
  • BIOS FC
  • Intel Core i7920 (D0) @ 3.50 GHz
  • Memory: 6 GB (3x2GB) Corsair XMSII DDR3 RAM
  • VGA: Sapphire Radeon HD4870 512 Mb DDR5 PCI-E working out of box
  • Audio : Full working with applehdaudio rollback
  • Network Full working
  • Graphic Full working with QE/CI
  • USB3 working with lacie USB3 drivers
  • Gigabyte SATA3 working fine
Installation method as described Tick.png Tick.png
GA-G41M-Combo F3 ICH7
  • BIOS updated : September, 06 2010
  • Intel Core 2 Duo 2.7 Ghz
  • Memory : 2GB of Ram - 1333 Mhz (DDR3)
  • VGA : nVidia Geforce 8400 GS 512 MB
  • Monitor : Hp w1707 with connect by DVI Cable
  • Hard Disk : Seagate 1TB
  • Installed 10.7 Final on Mac App Store by Hackboot v6.2 CD
  • Use hackboot v6.2 to boot EFI first and then install by tut split my HD with new partition (10GB) to restore install InstallESD.dmg on that disk to install.
  • Bootloader - Chameleon 2.0 RC5 r1191 [VS] (Tested on July 20, 2011)
  • DSDT created by DSDT autopacher and it's so amazing :)
  • Audio - Voodoo HDA 0.2.62 (x86_64) driver Modded to link from Speaker to PCM with Volume Control worked perfectly.
  • Video - nVidia Geforce 8400 GS 512 MB (works with nVEnabler64.kext)
  • SATA - AHCI in BIOS (Set up default on BIOS)
  • Ethernet - AtherosL1Cthernet.kext (the below link it's lastest version to fix any random kernel Panic).
  • Sleep & Wakeup : Works perfectly, no need to install SleepEnable.kext !
  • Here all my file with GA-G41M-Combo for Lion: [6] (Found on a haft of day to take full files)
  • Default Lion will be using 64 bit kernel
Tick.png Tick.png
G31M-ES2L Rev2.4 G31/ICH7 Installed Lion Final 11A494
  • CPU: Intel Core2 Quad Q8300 @2.50 GHz "OK"
  • GPU: XfX Nvidia GTS250 512MB "OK"
  • iGPU: GMA 3100 "Not working"
  • RAM: 2x2GB Kingston DDR2 800MHz "Ok"
  • NETWORK: Atheros L1 Lan, Working with AtherosL1Ethernet.Kext
  • AUDIO: Working with DSDT patch and Legacy HDA

Sleep Works ! Booting with Chameleon 2.0 RC5 775r

DSDT, AtherosL1Ethernet.Kext, Legacy 10.6.2 HDA, Graphics Enabler =yes Tick.png Tick.png
G31M-ES2C G31/ICH7 Installed Lion Final GM
  • CPU: Intel Core2 Conroe 2.66GHz "OK"
  • GPU: XfX Nvidia 8800GTX 768MB "OK"
  • RAM: 2x4GB G.Skill DDR2 800MHz "Ok"
  • AUDIO: Fully working
  • Graphics QE/CI working
  • Sleep Works
  • Install using xBoot method; note com.apple.Boot.plist must be set to values that the Lion installer recognizes, else it won't install. Also note that DSDT must be correct, else the installer will KP
  • Bootloader is Chimera/Chameleon 2RC5
  • DSDT built using Auto Patcher 0.6
  • Network requires AppleRT8169Ethernet.kext
  • AUDIO: Voodoo HDA, fully working
Tick.png Tick.png
GA-P55M-UD2 Intel P55/ICH10 System Configuration:
  • BIOS: F11
  • CPU: Intel Core i7-860 @ 2.80 GHz
  • GPU: Zotac NVIDIA GTX 470 AMP! 1280 MB
  • RAM: Kingston HyperX 8 GB (4x2GB) DDR3 1333 MHz
  • OOD: Samsung SH-D163B DVD-ROM, SATA (AHCI mode)
  • Keyboard: Apple Keyboard, USB
  • Mouse: Apple Magic Mouse, USB-Bluetooth Dongle (DIGITUS DN-30200)

Component Status:

  • All works
  • Install Method: from Partition (MaLd0n's USB Install Guide)
  • Bootloader: Chameleon 2.0 RC5 r1238
  • Kext (all used Kexts from MultiBeast 3.8.0):
  • NullCPUPowerManagement
  • FakeSMC
  • EvOreboot (Shutdown/Restart)
  • USB: IOUSBFamily Rollback
  • Disk: IOAHCIBlockStorageInjector
  • Audio (Realtek ALC888B): ALC8xxHDA, AppleHDA Rollback, ALC887/888b Enabler
  • Ethernet (Realtek RTL8111D): Lnx2Mac's RealtekRTL81xx Ethernet (edit in /Extra/org.chameleon.Boot.plist: EthernetBuiltIn=Yes (for App Store verify))
  • Graphics: edit in /Extra/org.chameleon.Boot.plist: Kernel Flags: npci=0x2000 PCIRootUID=1; GraphicsEnabler=Yes; OpenCL Patch by netkas (using HexEdit)
  • All works great, except sleep
? Tick.png
GA-P55A-UD4P Intel P55/ICH10 System Configuration:
  • BIOS: F14
  • CPU: Intel Core i5-760 @ 3.80 GHz OC Lynnfield
  • GPU: ASUS nVidia GTX 550 Ti! 1536 MB
  • RAM: GSkill Ripjaws X Series 8 GB (2x4GB) DDR3 1866 MHz
  • OOD: Samsung SH-D163B DVD-ROM, SATA (AHCI mode)
  • Keyboard: Logitech S520, USB
  • Mouse: Cyborg RAT3, USB

Component Status:

  • All works
  • Install Method: from Partition ([7])
  • Bootloader: Chameleon 2.0 RC5 r1238
  • Kext (all used Kexts from MultiBeast 3.8.0):
  • NullCPUPowerManagement
  • FakeSMC
  • USB: IOUSBFamily Rollback
  • Disk: IOAHCIBlockStorageInjector
  • Audio (Realtek ALC889): Modded AppleHDA for ALC889 Lion from kexts.com
  • Ethernet : Lnx2Mac's RealtekRTL81xx Ethernet (edit in /Extra/org.chameleon.Boot.plist: EthernetBuiltIn: Yes (for App Store verify))
  • Graphics: edit in /S/L/E NVDAGF100Hal.kext add dev id 0x124410de&0xffc0ffff and ATY_init in S/L/E
  • All works
? Tick.png
GA-Z68XP-UD3 Intel Z68 System Configuration:
  • BIOS: F6
  • CPU: Intel Core i5-2500K @ 3.29 GHz
  • GPU: MSI nVidia GTX 460 768 MB
  • RAM: Kingston (KVR1333D3N9 / 4G) 8 GB (2x4GB) DDR3 1333 MHz
  • OOD: PIONEER BD-RW BDR-206, SATA (AHCI mode)
  • Keyboard: USB
  • Mouse: USB

Component Status:

  • All works
  • Install Method: Iatkos L1
  • Bootloader: Chameleon 2.0 RC5 r1238
  • DSDT GA-Z68XP-UD3-F6
  • Audio (Realtek ALC889): Modded AppleHDA for ALC889 Lion from kexts.com
  • Ethernet : RTGNICv2.0.6.mpkg
  • Graphics: NVDAGF100Hal.kext, GeForceGLDriver.bundle, AppleGraphicsPowerManagement.kext
  • All works
? Tick.png
G41M-Combo G41/ICH7
  • Install Method;[8]

Components:

  • Intel Core Duo E6500 2.93Ghz
  • Sata HDD's x 4 x 2TB
  • IDE 750GB HDD x 2
  • 8GB (2x4GB) 1066 MHz DD3
  • Nvidia GT430 1GB
  • Asus DVD-RW
  • Logitech Webcam C905
  • Generic Chinese Bluetooth usb dongle
  • TP-Link WN551G PCI WIFI CARD
  • Apple USB Keyboard
  • Magic Trackpad and Mouse

Some Minor Issues I had to correct;

  • Could not log into Mac App Store fixed by adding ethernet string for the MB's onboard Ethernet to com.apple.boot.plist in Extra folder

I still need a solution for;

  • Airdrop does not work with the pci wifi card but otherwise no problems
Installed Lion Retail via guide and then made some modifications for this board

full guide for this board working 100% is available at Click here for Guide

? Tick.png
EP45-UD3LR G41/ICH10

Components:

All included in Package:
  • DSDT
  • fakesmc.kext
  • JMicronATA.kext
  • alc888b.kext
Tick.png Tick.png
G41M-ES2L (Rev. 1.1) G41/ICH10

Components:

All included in Package:
  • DSDT
  • fakesmc.kext
  • JMicronATA.kext
  • alc888b.kext
Tick.png Tick.png
GA-G31M-ES2L rev 2.4 Intel G31/ICH7 Full Retail install with Lion DVD-GM(11A511)
  • Used Hackboot-v6.2 to boot at first, after initial install reboot with Hackboot do usual formalities once in Lion environment, used DSDT Auto-Patcher to create a dsdt.aml * used Multibeast 3.7.3, did install with dsdt support (nothing else checked)
  • this worked for HDD boot and my Video card NVidia GS-8400 (0x06e4-0x10de) full QE-CI 1080P all resolutions unlocked via DVI-HDMI
  • Audio installed with AzaliaAudio.pkg
  • Network installed with Kext Wizard (used AtherosL1cEthernet.kext)
  • Asus Bluetooth USB-BT21 Dongle working OOB
  • wireless card Asus WL-138g V2 PCI fully functional OOB
Hackboot-v6.2, Multibeast 3.7.3, Kext Wizard, FakeSMC.kext and AtherosL1cEthernet.kext (in System/Library/Extensions) Tick.png Tick.png
GA-X58A-UD3R rev 1.0 X58/ICH10
  • Install Method:[9]

I used the Mac Pro 4,1 extra zip under the post install section, others may work too.
Component Status:

  • Sound not working (yet)
  • Ethernet working (used RealtekRTL81xx then showed up for me as Bluetooth PAN)
  • USB3/Gsata not tested.
Included in the Mac Pro 4,1 extra, but some may not be needed:
  • FakeSMC.kext
  • AHCIPortInjector.kext
  • IOACHIBlockStorageInjector.kext

Not Include and needed:

? Tick.png
GA-X58A-USB3 rev 1.0 X58/ICH10R
  • Install Method: Kakewalk 4.0 for Gigabyte Motherboards with GA-X58A-UD3R rev 1.0 drivers option [10]

Component Status:

  • BIOS Ver. F3
  • Sound working
  • Ethernet working
  • USB3/Gsata not tested.
  • GeForce GT 240 512 MB working
  • 8GB RAM (4x2GB) Kingston 9905403-011.A03LF
  • SONY BDRW BWU-300S working
  • 1 TB WDC WD10EARS-00Y5B1 Hard Disk
Not Include and needed: Tick.png Tick.png
GA-G31M-ES2L rev 2.4 Intel G31/ICH7 System Configuration:
  • Intel Pentium Dual Core E5800 @ 3.20 GHz
  • 8 GB (2x4GB) G.Skill DDR2 PC6400 RAM
  • 64 GB Kingston SSDNow V100 SSD
  • EVGA GTX 460 1 GB SC GDDR5 1 GB PCI-e Graphics Card
  • TP-Link TP-3269 Gigabit Ethernet
  • DWA-556 Xtreme N Wireless PCI-e Card
  • AZiO USB 2.0 Bluetooth 2.1 Adapter
Tick.png Tick.png
GA-P31-DS3L Intel P31+ICH7
  • Core2Duo Processor
  • Build 11A511
  • Working fine with Chameleon RC5 (rAndy)
  • 8169 Eth. works, with 8169 kext from Snow Leo
  • ALC888 works fully, with an old AppleHDA.kext (Snow Leo)
FakeSMC, custom DSDT, ALC888 Tick.png Tick.png
GA-P35-DS4 Intel P35+ICH9
  • Core2Duo E8400 Processor
  • NVidia Palit 9400GT 512MB
  • 4GB RAM DDR2
  • Build 11A511
  • Works perfect with this GA-P35-DS4-specific guide
  • GraphicsEnabler=Y, no injectors
FakeSMC, DSDT gets created during install Tick.png Tick.png
GA-P35-DS3 Intel P35+ICH9
  • Core2Quad Q8400 Processor
  • ATI Asus HD5670 1024MB
  • 2GB RAM DDR2
  • Build 11A511
  • Works perfect with the GA-P35-DS4-specific guide
  • GraphicsEnabler=N, no injectors
FakeSMC, DSDT gets created during install Tick.png Tick.png
GA-P35C-DS3R Rev 1.1 Intel P35+ICH9R
  • Core2Quad Q9400 Processor
  • NVidia Gigabyte 9800GT 1024MB
  • 8GB RAM DDR2
  • Build 11A511
  • Install Method: tonymacx86 xMove + MultiBeast upgrade from 10.6.8
  • All works except sleep
  • GraphicsEnabler=Y, no injectors
  • MultiBeast with Custom DSDT
  • Audio enabled using ALC8xxHDA and AppleHDA Rollback
  • Ethernet enabled using official Realtek 2.0.6 drivers
Tick.png Tick.png
GA-P35C-DS3R Rev 2.0 Intel P35+ICH9R
  • Core2Quad Q6600 Processor
  • NVidia Leadtek 8800GTS 512MB
  • 4GB RAM DDR2
  • Build 11A511
  • Works perfect with this GA-P35-DS4-specific guide
  • GraphicsEnabler=Y, no injectors
  • FakeSMC, DSDT gets created during install
  • ApplePS2Controller.kext and AppleACPIPS2Nub.kext to make PS/2 keyboard working
Tick.png Tick.png
GA-Z68X-UD3-B3 (rev 1.0) Intel Z68+ICH10
  • Core i5 2500k Processor
  • Nvidia Geforce 460 GTX 1Gb (OC)
  • 2x4GB RAM DDR3 1333Mhz
  • Build 11A511
  • Install Method: MaLd0n's USB stick method with Chameleon RC5 (smbios = Mac3,1), remove IOFirewireFamily otherwise KP in booting.
  • All works (USB 3.0 not tested), cinebench OpenGL = 39.5fps
  • GraphicsEnabler=Yes, EthernetBuiltin=Yes (otherwise App Store won't work), Kernel flag: add npci=0x2000, no injectors
  • DSDT generated by MaLd0n's DSDT Auto-Patcher (for Z68 version)
  • Audio enabled using ALC8xxHDA + AppleHDA Rollback + ALC889 in MultiBeast
  • Ethernet enabled using official Realtek 2.0.6 drivers
Tick.png Tick.png
GA-Z68X-UD4-B3 (rev 1.0) F8 Bios Intel Z68+ICH10
  • Core i7 2600k Processor @ 4.0 GHz (only multiplier changed to 40)
  • CoolMaster Hyper N520 CPU Cooler
  • 4x4GB Corsair RAM DDR3 1333Mhz
  • Default Bios setting, HPET changed to 64 bits, all Sata controllers changed to AHCI, CPU multiplier changed to 40, no changing in voltages, SMART enabled, CPU temp and fan alarm enabled
  • PowerColor ATI Radeon HD 4850 1G DDR3: ATI 48xx Patch for 10.7.1 from Multibeast 4.0.2
  • On-board Giga Ethernet: Lnx2Mac's RealtekRTL81xx 0.90 install package downloaded from developer's website
  • On-board sound: ALC8xxHDA.kext and AppleHDA.kext rollback
  • On-board Firewire; OOB
  • On-board ICH10 Sata: all working OOB (5 HDs)
  • On-Board Marvell Sata controller: working without JMicron kext, but the drives connected to this controller are old and both are being recognized as IDE by the Bios, so not fully tested
  • On-board eSata: OOB
  • On-board USB 2: OOB
  • On-board USB 3: Multibeast NEC/Renesas and Etron kext; drive only recognized if attached after system is up, if attached before boot needs reconnection
  • TP-Link TG-3269 (RTL8169SC chipset) PCI Giga Ethernet card: vanilla AppleRTL8169Ethernet.kext copied from a 10.6.8 IONetworkingFamily.kext/Contents/Plugins to the same place in original 10.7.1 kext
  • TP-Link WN851N (AR5416 chipset) PCI a/b/g/n Wireless card not working: 10.7.1 moded IO80211Family.kext; interface shows fine, AirDrop shows in Finder, but connection attempts cause infant freeze (not panic); clicking AirPort icon in toolbar causes instant panic
  • Install Method: Kakewalk 4.1.0 choosing GA-Z68X-U3H-B3 mobo and replacing DSDT file in the USB stick Extra folder with one downloaded from tonymacx86's DSDT Database
  • GraphicsEnabler=No, even to install: this particular mobo+ATI card combination were hanging during boot.
  • EthernetBuiltin=No (App Store not tested), Kernel flag npci=0x2000 (automatically added by Kakewalk)
  • E/E/FakeSMC, E/E/ElliottForceLegacyRTC (to prevent CMOS reset), ALC8xxHDA.kext and S/L/E/AppleHDA.kext rollback, all installed by Kakewalk along with NullCPUPowerManagement and JMicron kexts. Last both deleted after install.
  • Audio was enabled after install, but 10.7.1 update disabled it. Both, reinstalling Kakewalk or copying S/L/E/AppleHDA.kext (rolled back version) from backup, restored sound
  • /Library/Preferences/

SystemPreferences/NetworkInterfaces.plist edited to change BSD interface names order (en0, en1, en2)

? Tick.png
GA-EP45-DS3R Intel P45+ICH10R
  • Core2Quad Q6600 Processor
  • nVidia Geforce GTX260 896 MB
  • 8GB RAM DDR2 (1066 MHZ)
  • Build 11A511
  • Install Method: MaLd0n's USB stick method with Chameleon RC5 guide
  • GraphicsEnabler=N, DSDT Edited
  • DSDT generated by MaLd0n's DSDT Auto-Patcher
  • Audio enabled using ALC899a.kext + Patched AppleHDA.kext audio
  • Ethernet enabled using Lnx2Mac's Realtek RTL81xx Driver ethernet
Tick.png Tick.png
GA-H67MA-USB3-B3 Intel H67
  • Core i5 2500 Processor
  • nVidia Geforce 9400GT 1 GB
  • 2 X 2GB RAM DDR3 (1333 MHZ)
  • Build 11A511
  • Install Method: Tonymac's XMove + Multibeast [12]
  • Graphics Enabler=Yes, No DSDT
*Multibeast with Easybeast
  • Audio enabled by checking Apple8XXHDA, AppleHDA rollback and ALC889 in Multibeast
  • Ethernet enabled by checking Realtek Gigabit Ethernet in Multibeast
  • Graphics by NVEnabler.kext
  • USB3.0 working
  • Voodoo ps/2 Controller kext not working
Tick.png Tick.png
GA-H67N-USB3-B3 (F5 BIOS revision) Intel H67 /intel HD 3000 onboard

System Configuration:

  • Core i5 2500K Processor
  • intel HD 300 onboard with HDMI audio
  • 2 X 4GB RAM DDR3 (1333 MHZ) G.Skill sniper
  • Wd Caviar Green 1Tb
  • Gigabyte SATA3 working fine
  • Sony Blu-ray BD-5300S
  • Case slimDesktop 400w
  • OSX Lion 10.7.1
  • GeekBench 2.20 score 9.625
* Install Method: OS X 10.7 Lion GM (MaLd0n's USB Install Guide)
  • Graphics Enabler=Yes, EthernetBuiltin=Yes, DSDT from Tonymac's, MacBook Pro 8.1 smbios.plist, Chameleon 2.1 rc1650
  • ALC889, RealtekRTL81xx, DSDT patching for HDMI audio
  • Audio enabled by checking Apple8XXHDA, AppleHDA rollback and ALC889 in TonyMacX86'sMultibeast ([13])
  • Network RealtekRTL81xx beta ([14])
  • Graphics QE/CI OOB
  • USB3.0 working with TonyMacX86'sMultibeast
  • by PippoX0
Tick.png Tick.png
GA-H67A-UD3H-B3 (F6 BIOS revision) Intel H67
  • Install Snow Leopard using iBoot + MultiBeast
  • Update to 10.6.8 using Sandy Bridge guide (update causes KP without UpdateHelper. Run MultiBeast for DSDT ONLY, run UpdateHelper, reboot, run 10.6.8 Combo Updater, run MultiBeast again (DSDT ONLY), reboot, install LAN and audio kexts with MultiBeast)
  • If using Intel HD 2000 video (integrated into CPU), screen is black after 10.6.8 update reboot. Shutdown system after update, install 3rd party video card, turn system back on. HD 2000 is incompatible with SL. According to this thread it works on Lion (after removing a kext).
  • Install Lion using xMove + MultiBeast
ALC889, RealtekRTL81xx Tick.png Tick.png
GA-G31M-ES2L bios F10 rev 1.0 Intel G31+ ICH7
  • Pentium E5200 Processor (OOB) by my SSDT or with "GeneratePStates=Yes" and "GenerateCstates=Yes" at org.Chameleon.Boot.plist in Extra
  • nVidia MSI Geforce 240GT 1 GB DDR3 (OOB) enabled by "GraphicEnabler=Yes" at org.Chameleon.Boot.plist in Extra
  • 2 X 2GB RAM DDR2 (800 MHZ)
  • Mouse and Keyboard is USB
  • Build 11A511
  • Install Method: Install from USB FlashDrive (which restored from InstallESD.dmg) with after installed Cameleon RC5 and fakeSMC+DSDT+Smbios in Extra. After OS install, loading from FlashDrive, installing Chameleon on system disk, DSDT and Smbios at Extra and fakeSMC at S/L/E
  • Use Kernel Flag "npci=0x2000" to avoid frizz on "PCI configuration beginning" and "UseKernelCache=Yes" at org.Chameleon.Boot.plist in Extra for faster loading.
  • DSDT (ALC883+ all issues fixes) DSDT+AppleHDA+Fakesmc
  • Chameleon2 RC5 build 1203
  • DSDT without Processor and Video sections
  • FakeSMC.kext with temp sensors controllers
  • Audio (ALC883) enabled by DSDT and patched AppleHDA
  • Ethernet (Realtek8111) enabled by EthernetBuildIn=Yes at org.chameleon.Boot.plist in Extra
  • Sleep, Restart, SpeedStep all works
Tick.png Tick.png
GA-EP43-UD3L Intel P43+ICH10
  • Core2Duo E6300 Processor
  • NVidia Gigabyte 8400GS 512MB
  • 4GB Kingstom RAM DDR2@800Mhz
  • Dell USB Keyboard + Apple Magic Trackpad
  • Install Method: tonymacx86 xMove + MultiBeast with fresh installation
  • All works except HDMI audio
  • MultiBeast with Custom DSDT
  • Using GraphicsEnabler=Yes
  • Audio enabled using ALC8xxHDA and AppleHDA Rollback
? Tick.png

GA-P67A-UD4-B3

Intel P67

  • CPU: Intel 2600k
  • Graphics: Sapphire Radeon HD 6870 Fully recognized with QE/CI working
  • Sound working
  • Sleep Mode working
  • USB 3 working in full speed
  • Installed by 10.6.0 Retail DVD
  • Installed Update Helper
  • Updated with 10.6.8 Combo Update
  • Installation & hardware recognition by iBoot + Multibeast 3.8.0
  • Downloaded GA-P67-UD4-b3 DSDT from tonymac
  • Upgraded Lion with xMove method
  • Sound: AppleHDA Rollback, ALC8xxHDA
  • Ethernet: Realtek Gigabit Ethernet 2.0.6
  • FakeSMC Plugins
  • USB 3.0 - NEC/Renesas

Included in MultiBeast.

Guarantee one of most recommended parts for hackintosh build in 2011. Everything just works effortlessly from installation, 64bit, audio, ethernet, graphics with QE/CI & multiple display (OOB), sleep mode just works from the moment after running MultiBeast. You can see 'Full Tutorial of Making a Hackintosh' for more information.

Tick.png Tick.png
X58A-UD3R X58
  • Core I7 930
  • EVGA NVIDIA GEFORCE GTX 275 896 MB RAM
  • 12 GB RAM
  • INSTALLED WITH KAKEWALK FOR LION AND THEN Updated with 10.7.1 Combo Update
  • gaphics worked out of the box full resolution and everything else.
  • ethernet worked with: Lnx2Mac's realtek81x driver in multibeast 3.8.0
  • Sound working
  • Ethernet: Ran multibeast to install Realtek gigabit network kext
  • Sound: VoodooHDA, ALC8xxHDA - think some of the jack colours are mixed up, but they work
? ?


GA-EP41-UD3L

Intel G41 / ICH7 Chipset

  • Install method IAtkos L1 DVD
  • CPU: quad core q9550
  • Graphics: NVIDIA 8400gs 256MB Fully recognized with QE/CI working
  • Sound works with alc8xx.kext and hdae888.kext
  • Sleep Mode not working
  • Updated to 10.7.2 via online Software Update
? Tick.png


[edit] Intel

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
DX58SO Intel X58 System Configuration:
  • BIOS: 5561
  • CPU: Intel Core i7 3.4GHz
  • GPU: ATI Radeon 5770 1024MB, XFX (miniDP not tested yet).
  • RAM: 3 x 2GB Kingston DDR3 1333MHz
  • OOD: Kingston 128GB SATA2 SSD
  • Keyboard: Apple Aluminium Keyboard
  • Mouse: Apple Magic Mouse, noname BT dongle

Component Status:

  • Everything works including SSD Trim; video OOB, sleep without any sleepenabler.
  • Install Method: Multibeast 3.8
  • Update with 10.7.1 Combo Update
  • Bootloader: Chameleon 2.0 RC5 with graphicsenabler=yes
  • MultiBeast 3.8.0, including:
    • DSDT Auto Patcher
    • voodohda 0.2.1
    • hnak's AppleIntelE1000e Ethernet
  • Voodohda not working after wake-up, torn sound. Will try kext upgrade.
Tick.png Tick.png
DG35EC Intel G35 System Configuration:
  • BIOS: 0118
  • CPU: Intel Core2 Quad Q6660
  • GPU: Onboard GMA3500 won't work - nVidia XFX GTS250 1GB
  • RAM: 2 x 2GB OCZ Reaper HPC DDRII 800MHz
  • OOD: 2x 500GB Hitachi SATAII
  • Keyboard: Apple Aluminium Keyboard
  • Mouse: Apple Magic Mouse,

Component Status:

  • Everything works
  • Install Method: DVD Install Lion
  • Update with 10.7.1 Combo Update
  • Bootloader: Chameleon 2.1 RC5 rev1554
    • DSDT Auto Patcher
    • voodohda 2.7.3
    • Intel5266mm Ethernet
    • Firewire OOB
    • USB OOB
Tick.png Tick.png
DG41RQ Intel G41 (ICH7) System Configuration:
  • BIOS: Downgraded November 06,2009
  • CPU: Intel E7500 core 2 Duo 2.93GHz
  • MotherBoard: Intel DG41RQ
  • GPU: ASUS GeForce 210 1GB DDR3 - works OOB (QE/CI)
  • RAM: DDR2 800Mhz 2GBx2
  • DVD: LG DVD-RW SATA
  • HDD: WD 500GBx2 SATA
  • Monitor 19" LCD: VGA
  • Keyboard:PS/2
  • Mouse:PS/2
  • onboard Ethernet - works
  • onboard Audio - works

Component Status:

  • Install Method: clean install onto a NEW Partition, xMove+Multibeast [15]
  • Update with 10.7.1 Combo Update [16]
  • MultiBeast with Custom DSDT
  • DSDT generated by MaLd0n's DSDT Auto-Patcher
  • Without DSDT - Just check
    • System Utilities
    • FakeSMC
    • ElliottForceLegacyRTC
    • EvOreboot
    • NullCPUPowerManagement
    • Chimera v1.5.4 r1394
    • 32-bit Apple Boot Screen
    • MacPro3,1 smbios.plist
    • tonymacx86 Remixed theme
    • OSx86 Software.
    • VoodooHDA 0.2.6.1 (32 bit only)
    • Lnx2Mac's Realtek RTL81xx Driver
    • Voodoops2controller (32 bit only)
  • Sleep & Wakeup - Works perfectly, no need to install SleepEnable.kext
  • BIOS SETUP - 1. Load default on BIOS, 2.Setup drive mode Legacy and SATA only, 3.Boot->UEFI->Enable
  • I have dual boot windows and LION on GPT, windows7 was already installed
  • Sound, LAN, Graphics Perfectly working Just multibeast it.
  • PCI Configuration begin - 10.6.7 AppleACPIPlatform IOPCIFamily kexts in S/L/E
  • Monitor 19": VGA Fixed to 1368x768@60Hz Using ConfigX
Tick.png Cross.png
DP67DE B3 P67 Intel core i3 2100 ok
  • 8gb ddr3 1333 - to install use 4gb ram
  • radeon hd4850 sapphire 512mb - ok dual display
  • network intel 82579v
  • realtek alc892
  • usb 3.0 nec/renesas
  • fw400 - native
  • iBoot 3.1.1 with PCIRootUID=1 -x thanks to user raketa [17]
  • installed with Multibeast 3.8.0 UserDSDT and Dsdt.aml from DSDT fixer
UserDSDT Install
  • DSDT.aml
  • alc8xxhda, alchdaRoolBack and alc892 enabler non-dsdt
  • ati hd48xx injector, ati hd48xx patch 10.6.8
  • usb 3.0 nec/renesas patch
  • hnak´s AppleIntele1000 Ethernet
  • NullCPUPowerManagement.kext
? Tick.png
D945GCNL Intel D945 ICH7 Intel E6600 Core2 Duo - 2GB + 2GB DDR2 - GMA950 - AHCI Mode SATA
  • Install Method: Retail Disk Image install on Hackintosh or Mac - Mac OS X 10.7 (11A511) - Chameleon 2.0 RC5 r1171
  • GMA950 - Works "Dual Display 1920*1200"
  • Ethernet - works
  • 10.4 - 10.7 compatible "based on development-platform motherboard"
  • Software update works from 10.7.0 - 10.7.1

Extra

  • DSDT.aml
  • org.chameleon.Boot.plist

S/L/E

  • fakesmc.kext
  • RealtekRTL81xx.kext
  • IONetworkingFamily.kext
Tick.png Cross.png

[edit] HP

[edit] HP

Hardware Name Chipset Notes Patches Used Compatible 32/64bit
Pavilion G3333l Intel Make Lion iATKOS ML 2 Installer with USB Flash installer and ML2_Bootloader_Installer.pkg
  • Motherboard Setting: Drives Controller set to: AHCI
  • Processor Intel Dual Core
  • Onboard Lan with official Realtek driver RTL8169
  • Sound using VoodoHDA.kext
  • Graphics Driver Standard GPU Mac (not specific for 82G33/G31 Express Graphics Controller)
  • Combo update :
  * 10.7.3 Update
  * 10.7.4 Update
  * 10.7.5 Update
               
Tick.png

[edit] MSI

Hardware Name Chipset Notes Patches 32/64bit working with patches
Z68A-GD80-G3 Z68 Make Lion Installer with xMove + Multibeast + delete TyMCE kext from installer
  • Motherboard Setting: Drives Controller set to: AHCI, Virtu set to disable (d-Mode will not boot osx eventhough lion already installed, haven't tried i-Mode)
  • Kext Used: FakeSMC , LegacyRTC, NullCPUpowerManagement, Audiokexts from Multibeast (ALCxxx + HDA rollback + 892 Enabler) + System Definition of MacPro 5,1
  • Core i5 2500K @4GHz (still detected @3.3GHz)
  • Sparkle GTX460 1GB (Havent tested sound over HDMI)
  • Seagate 500GB sata3 + other disks
  • Samsung DVD-RW
  • Onboard Lan with official Realtek driver, network > advance > hardware > configure manually> MTU > 8982 (no problem so far except its as if both LAN was used)
  • Sound using ALCxxx + HDA rollback + 892 Enabler

Updated n Running Lion 10.7.1 (might need to reinstall kexts)

Tick.png Tick.png
P45 Neo-F Intel P45 Chipset

Intel ICH10 Chipset

Intel C2D E8500 *OC at 1600FBS
  • 4GB DDR2 1066 - [ P I ] F2-8800CL5D-4GBPI
  • Radeon hd5570 1gb - H557F1G
  • Network Realtek 8111C.
  • Realtek ALC888 (2.0 Ok) (5.1 NG)
  • Bios settings:
    • RAID Mode (AHCI)
    • ACPI Standby State (S3)
  • Method: Install with iATKOS_L1
  • Options:
  • BootLoader Options
    • Graphics Enabler (NO)
    • Built-in Ethernet
  • Patches
    • Extra/Extension
    • Fake MSC
    • Disabler
  • RTC
    • RTC
  • EvoReboot
  • Drivers
    • Main Hardware
      • Sata
        • AHCI Sata Intel
        • JMicron IDE (Works Fine)
  • Sound
    • Voodoo 2.2 (AppleHDA ALC8xxx & ALC888 don't work)
  • USB
    • USB
  • Motherboard Sensors
  • VGA
    • Ati Inie
  • NetWork
    • Wired
      • Realtek RTL81XX
Cross.png Tick.png

[edit] Graphics Cards

Please specify if your card is AGP, Integrated, PCI or PCI-E.
Also, place chip and board manufacturer in their respective column.

[edit] PCI-E

[edit] ATI

Model Memory Card-Manufacturer Notes QE/CI OpenCL Working Output Dual Display 32/64bit working
Radeon HD 4850 512MB Sapphire Needed "Legacy4800Controller.kext" in the E/E. Occasional glitches (static on screen for a few seconds) when returning from sleep.GraphicsEnabler=Yes Tick.png Tick.png 2x DVI Tick.png Tick.png Tick.png
Radeon HD 4850 512MB Sapphire 10.7.1 hd4800 patch from Netkas Tick.png Tick.png 2x DVI Tick.png Tick.png Tick.png
Radeon HD 5450 1GB Gigabyte Simply moved ATI5000injector.kext into E/E and reboot Tick.png Cross.png DVI Cross.png Tick.png Tick.png
Radeon HD 5670 1GB GDDR5 Sapphire GraphicsEnabler=Yes Tick.png Tick.png DVI, HDMI, DisplayPort Tick.png Tick.png Tick.png
Radeon HD 5770 1GB XFX *boot with framebuffer=vervet, GraphicsEnabler=Yes Tick.png Tick.png 2x DVI Tick.png Tick.png Tick.png
Radeon HD 5770 1GB PowerColor works without any injector Tick.png Tick.png VGA/DVI/HDMI Tick.png Tick.png Tick.png
Radeon HD 5770 1GB Gigabyte Works OOB with GraphicsEnabler=Yes Tick.png Tick.png 2x DVI/HDMI Tick.png Tick.png Tick.png

[edit] NVIDIA

Model Memory Card-Manufacturer Notes QE CI Working Output Dual Display 32/64bit working
8400 GS 256 or 512MB PNY Works with GraphicsEnabler=y Tick.png Tick.png VGA/DVI Tick.png Tick.png Tick.png
8800 GT 512MB XFX Works with GraphicsEnabler=y Tick.png Tick.png VGA/DVI Tick.png Tick.png Tick.png
8800 GTS 512MB LeadTek Works with GraphicsEnabler=y Tick.png Tick.png VGA/DVI Tick.png Tick.png Tick.png
ASUS EN8800GTS 512 G92 512 ASUS works full qe/ci with these http://www.mediafire.com/?vk6wu84za7aao8l . Install the kexts with the program provided.If doesn't work try changing the device id in the info.plist of the kext with your own(you can find it in system profiler) Tick.png Tick.png DVI/DVI Tick.png Tick.png Tick.png
9500 GT Palit Works perfectly out of the box. Tick.png Tick.png VGA/DVI Tick.png Tick.png Tick.png
9600 GT Point of View Works perfect out of the box. Tick.png Tick.png 2x DVI Tick.png Tick.png Tick.png
9600 GT 1GB Palit Works OOB with GraphicsEnabler=Yes Tick.png Tick.png VGA/DVI/HDMI/Display Port Tick.png Tick.png Tick.png
9800 GT 512MB ASUS Works with GraphicsEnabler=y Tick.png Tick.png VGA/DVI Tick.png Tick.png Tick.png
9800 GT Zotac Works oob but listed as GTS250, NVenabler works perfectly Tick.png Tick.png VGA Cross.png Tick.png Tick.png
9800 GTX+ EVGA Works perfect with kext from multibeast. Tick.png Tick.png VGA Tick.png Tick.png Tick.png
GT 210 512MB ASUS Works OOB with GraphicsEnabler=Yes Tick.png Tick.png VGA/DVI/HDMI Tick.png Tick.png Tick.png
GeForce GT220 1GB Gigabyte works OOB with GraphicsEnabler=Yes Tick.png Tick.png DVI/HDMI/VGA Tick.png Tick.png Tick.png
GTS 250 OC TwinFrozr 1GB MSI works OOB with GraphicsEnabler=Yes Tick.png Tick.png 2x DVI Tick.png Tick.png Tick.png
GTS 250 1GB XFX works OOB Tick.png Tick.png 2x DVI Tick.png Tick.png Tick.png
GTX 280 works OOB Tick.png Tick.png 2xDVI Tick.png
GTX 285 works OOB Tick.png Tick.png
GT 430 1GB Gigabyte works with latest CUDA and Oleg's IOPCIFamily v2 do stop [ PCI Configuration Begin ] Tick.png Tick.png 2x DVI Tick.png Tick.png
GT 440 1024MB Palit works with nvidia drivers for Quadro Mac Tick.png Tick.png DVI/VGA/HDMI Tick.png
GTS 450 1GB EVGA added device id to NVDAGF100hal.kext, GraphicsEnabler=Yes Tick.png 2x DVI Tick.png Tick.png
GTX 460 1024MB Palit GraphicsEnabler=Yes & npci=0x2000 Tick.png Tick.png VGA/DVI-D

(HDMI/DVD-I not tested)

? ? Tick.png
GTX 460 SC 1024MB EVGA works with GraphicsEnabler=Yes & npci=0x2000 Tick.png Tick.png 2x DVI Tick.png Tick.png Tick.png
GTX 480 1.5GB EVGA works with nvidia drivers for Quadro Mac Tick.png Tick.png 2x DVI Tick.png Tick.png Tick.png
GTX 560 ti 1GB MSI added device id to NVDAGF100hal.kext, installed ATY_init.kext, GraphicsEnabler=Yes, npci=0x2000 Tick.png Tick.png DVI/DVI/mHDMI Tick.png Tick.png Tick.png

[edit] Network Cards

[edit] Wireless

Interface Standard Device Manufacturer Chipset Notes 32/64bit working with patch
USB b/g RTL8187B Realtek RTL8187B Download Installer from here

Add the italics text below your boot.plist to stop an App Store verification error.

<key>EthernetBuiltIn</key>
<string>Yes</string>
Tick.png Tick.png
USB b/g/n EW-7811UN Edimax RTL7811UN Install Official 10.6 driver restart then plugin the USB adapter. I installed twice, the 1st did not work. Now i'm happy again! :D Tick.png Tick.png
PCI 802.11n 300Mbps DWA-547 D-Link Atheros Works as native Airport Extreme card. Only need to edit IO80211Family.kext in S/L/E/IO80211Family.kext/Contents/PlugIns/AirPortAtheros21.kext/Contents/Info.plist/ add: <string>pci168c,29</string> !!! Not working. System freezes with i3, i5 i7 !!! Cross.png Cross.png
USB b/g/n TEW-649UB TRENDnet Download 10.6 Installer from [18] Tick.png Tick.png
PCI b/g D-Link DWL-G520 revB D-link Atheros AtherosFix - id: pci168c,13 Tick.png Tick.png
PCI-E b/g/n Atheros AR9280 (AR5BXB92) (AR5009) Toshiba/Atheros Atheros This is a Toshiba branded Mini PCI-E card with a Mini PCI-E to PCI-E adapter. Immediately and automatically detected as an AirPort Extreme card, no kexts, edits or fixes needed. Working extremely well with 10.7.1, 32/64-bit, Core i5. Tick.png Tick.png
PCI-E b/g/n BCM94322MC Apple Inc. Broadcom This is an Apple branded Mini PCI-E card with a Mini PCI-E to PCI-E adapter. Immediately and automatically detected as an AirPort Extreme card (Broadcom BCM43xx), no kexts, edits or fixes needed. Working extremely well with 10.7.1, 32/64-bit, Core i5. Guide can be found at [19] Tick.png Tick.png
PCI b/g/n TP-Link TL-WN851N TP-Link Atheros AR5416 IO80211Family.kext, required in /S/L/E. !!! No. It doesn't work ! CAUTION: KP with i5 and i7 processors! Cross.png Cross.png

[edit] Wired (Ethernet)

Interface Standard Device Manufacturer Chipset Notes 32/64bit working with patch
PCI 10/100/1000 TG-3269 TP-Link RTL8169SC Add the missing/removed vanilla S/L/E/IONetworkingFamily.kext/

Contents/Plugins/AppleRTL8169Ethernet.kext, from a 10.6.8 installation, to the same place in the 10.7.1 vanilla IONetworkingFamily.kext. No mods, it just works.

? Tick.png

[edit] Sound Cards

Interface Hardware Name Manufacturer Notes 32/64bit working with patch

[edit] Other Accessories

Type of Accessory Item Description Manufacturer Notes 32/64bit working with patch
TV Card USB DVB-T TV Tuner Terratec Cinergy T USB XXS Works without any problems. Plug n play Tick.png Tick.png
WebCam USB Logitech HD C310 720p WebCam + 5Mpx shoot Works OOB without any problems. Plug n play Tick.png Tick.png

This page was last modified on 22 April 2013, at 09:13.
This page has been accessed 231,711 times.
Powered by MediaWiki © 2013 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers