HCL 10.8.0

From OSx86
Jump to: navigation, search
OS X 10.8.0
Hardware Compatibility

This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for 10.8.0 builds only.

For how to edit the Wiki, please see this thread. Thank you!

You're looking for an Installation guide? see here

Contents

[edit] Motherboards

[edit] Abit

Hardware Name Chipset Notes Patches Used 32/64bit working with patches


[edit] Asrock

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
H61M-S 1.80 Intel H61 System configuration:
  • Intel i5 2500k stock clocks
  • DDR3 1333MHz 2x2Gb
  • XFX Radeon 4850 512 Mb
  • Audio Realtek ALC662

Component status:

  • CPU speedstep works with patch
  • Audio works - ALC 662 kexts
  • Ethernet - Atheros 8151 kext
  • Wireless - Edimax dongle (Ralink 3070 chip) works with drivers from Ralink
  • USB 2.0 - Native work
  • Shutdown/Reboot - Work
  • Sleep - Work with properly edited DSDT
  • GFX - Exotic 10.8, 10.8.1 patch; dual display working
Installation method:
  • installation via chameleon
  • Mountain Lion 10.8

Post install

  • no DSDT required for installation but to get sleep a properly modified DSDT is required, SSDT required to enable speedstep, GraphicsEnabler=Yes after Exotic patch, AppleIntelCpuPowerManagement.kext patch required, FAKESMC.kext, AtherosL1cEthernet.kext
  • Ethernet Built-in required to obtain iCloud and AppStore access; Messages fixed with Clover;

NOT Working: Everything works!

Cross.png Tick.png
Z68 Extreme4 Intel Z68 System Configuration:
  • Model Name: Mac Pro
  • Model Identifier: Mac Pro 3,1
  • CPU: Intel i5-2500
  • GPU: Nvidia GTS 250 1gb (Intel onboard doesn't work, see notes)

Component Status:

  • Audio works with kext
  • Ethernet works with kext (below)
  • Only Sleep does not work

Installation Guide:
I got started with this guide and it got me 90% of the way. Read this link, and what I've posted, you should be able to install a fresh OSX 10.8 on your computer.

  1. Here
  • BIOS: You need to flash your mobo BIOS with the patched 2.20 version to be able to install and boot OSX 10.8.x. This is because as of 10.8 the NullCpuPowerManagment.kext is rendered useless, which means you cannot boot. The patched BIOS will fix this permanently, meaning you wont even need a replacement .kext. Read about it and download the file here:
  1. http://bios.zmac.net/asrock/Asrock-Z68-Extreme4-220_modified.zip
  2. Source of BIOS patches: http://biosrepo.wordpress.com/asrock/z68/
  • DSDT: You can install and run OSX without a DSDT, but it is unstable and has odd issues (sometimes boot without USB working, no sleep, etc). Put this file in your /Extra/ folder and reboot to fix.
  1. Here
  • SMBIOS: Do not change the SMBIOS from what is default installed. It should be MacPro3,1 by default. If you try updating it to MacPro5,1 like I did, your Mac will stop booting and you'll have to start over (or clone from a backup like I did).
  • Cloning: Speaking of which, once you get to your desktop, I highly recommend making a clone to another partition/USB drive of your hard work so far. I had to reclone 4 times during the process from making mistakes, and my clone image saved me many hours. Use CCC (Carbon Copy Cloner) or your favorite app.
  • Booting: Just use the bootloader (Chimera).
  • Ethernet: Won't work out-of-box, needs this kext installed. Drop the file in /System/Library/Extensions/ and then repair permissions via Kext Utility.app. (Broadcom BCM57781)
  1. http://files.osx86.net/downloads.php?do=file&id=3089&act=down&actionhash=guest&multiple=MzA4OS1CQ001Nzc4MS56aXA=
  • Graphics: You will need to have your Intel Integrated Graphics 3000 plugged into a monitor directly. Tell the BIOS to use "Onboard" video (in Northbridge section). This is required for OSX installation and first boot. After install required settings, you can tell BIOS to use your own graphics card again. I used an Nvidia GTS 250, which worked out of box. If your graphics card doesn't work immediately, find the solution using Onboard video in the meantime.

Just BIOS patch.

Cross.png Tick.png

[edit] Asus

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
P5E-Deluxe Intel X48 System configuration:
  • Intel Core 2 Quad 9550K
  • Chipset Intel X48
  • MSI GTX 580 Lightning works by default
  • Dual Display
  • Wireless Adapter ASUS WL-138g V2


Component status:

  • Audio - Yes
  • Ethernet - Not tested
  • USB 2.0 - Yes
  • Shutdown/Reboot - Yes
  • Sleep - No


Installation method:
  • Mountain Lion 10.8


Post install

  • Using VoodooHDA 0.2.7.3


NOT Working:

  • Will sleep fine, but waking doesn't work.
  • Mac App Store
  • iCloud


Notes:

  • Working on how to put iCloud working... no look until now :S
Cross.png Tick.png
Asus Z8NA-D6 Intel 5500 System configuration:
  • Intel Xeon E5506 2,16 ghz 4core. X2
  • Chipset Intel 5500
  • asus nvidia gt540
  • 12gb Ram
  • Dual Display


Component status:

  • Audio - not tested
  • Ethernet - Works with intel network kext
  • USB 2.0 - Yes
  • Shutdown/Reboot - not properly
  • Sleep - No


Installation method:
  • Mountain Lion 10.8
  • Myhack USB drive


Post install

  • Intel Network driver


NOT Working:

  • don't sleep
  • asus MIO audio Works fine


Notes:

  • dual socket xeon support
  • I use two 4core CPU works with 6core too. So you can build a 12core hackintosh beast.
Cross.png Tick.png
P5W DH Deluxe (Bios 3002) Intel 975X/ICH7R System configuration:
  • Intel Core 2 duo E6300
  • DDR2 4GB (4x1gb) 800 MHz Ram
  • ASUS radeon ati 5770 1gb
  • Audio Realtek ALC882M

Component status:

  • Bios setup - AHCI enabled in IDE System - Memory remapped enable - JMB 363 disable
  • CPU - overclock bios 380 MHZ x 7
  • Audio works - Patched AppleHDA + HDAEnabler
  • Ethernet - Native Works (Marvell 88E8053 Gigabit)
  • Wireless - RTL8187L not work at 64 bit
  • USB 2.0 - Native work
  • Shutdown/Reboot - Work
  • Sleep - Work
Installation method:
  • installation MY HACK 3.1.2
  • Mountain Lion 10.8 GM
  • no patch

Post install

  • install Patched AppleHDA + HDAEnabler
  • not install Voodoohda , instable system k.b
  • not install DDR2 533 mhz , a-data , v-data kernel panic ioapci....

NOT Working:

  • firewire not work , in lion 10.7.5 work .
  • wireless RTL8187L not supported in 64 bit
Cross.png Tick.png
P8Z68-V LX (Bios 3703 Patched) Intel Z68 System configuration:
  • Intel Core i5 2400
  • DDR2 8GB (4x2) KHX1600C9D34GX
  • GeForce GT440 1GB
  • Audio Realtek ALC887


Component status:

  • Audio - Yes (Patched AppleHDA)
  • Ethernet - Yes
  • USB 2.0 - Yes
  • Shutdown/Reboot - Yes
  • Sleep - Not reliably
Installation method:
  • Mountain Lion 10.8 GM


Post install

  • UserDSDT
  • Realtek ALC887/888b Without DSDT


NOT Working:

  • Will sleep fine, but waking doesn't work. Will play around more with this.
Cross.png Tick.png
P5W DH Deluxe (Bios 3002) Intel 975X/ICH7R System configuration:
  • Intel Core 2 QUAD Q6600
  • DDR2 4GB (2x2) 800 MHz Ram OCZ + DDR2 2GB (2x1) 800 MHz Good Ram Pro
  • GeForce 8600 GT 256MB GDDR2
  • Audio Realtek ALC882M


Component status:

  • Audio works - stereo with VoodooHDA(fix cracling with SSE2)
  • Ethernet - Native Works (Marvell 88E8053 Gigabit)
  • USB 2.0 - Native (All Internal I/O Connectors work, on Back Panel I/O Ports two work, two don't work)
  • Shutdown/Reboot - Work
  • Sleep - doesn't work
Installation method:
  • Mountain Lion 10.8 GM


Post install

  • VoodooHDA 0.2.7.3


NOT Working:

  • Sleep mode doesn't work! Couldn't get SleepEnabler to work - help :P
  • FIX FOR SLEEP = just disable USB legacy support in BIOS, then sleep will work
Cross.png Tick.png
P5QL-EM (BIOS 0802) Intel G43 System configuration:
  • Intel Core 2 QUAD Q6600
  • DDR2 4GB (2x2)@1066 MHz
  • Audio Realtek ALC1200


Component status:

  • Audio - Works with latest VoodooHDA
  • Ethernet - Works with Lnx2Mac
  • USB 2.0 - Works
  • Shutdown/Reboot - Work
  • Graphics - NO, only in VESA-mode
  • Sleep - ?
Installation method:
  • Mountain Lion 10.8 GM
  • Create bootable USB-key with Chameleon
  • Install drivers


Kext's used:

  • NullCPUPowerManagement, FakeSMC, VoodooHDA 2.7.3, Lnx2Mac

Intel X4500 only works in VESA mode, consider adding a Nvidia/ATi-card

Cross.png Tick.png
P6X58D-E Intel® X58/ICH10R System configuration:
  • Intel Core i7 950
  • DDR3 12GB (2x2GB 2x4GB) 1333 MHz Ram
  • GeForce GTX 460 SE 1024MB
  • Audio Realtek ALC889


Component status:

  • Audio works with patched Apple HDA
  • Ethernet - Works with Marvell 88e8056 Kext


Installation method:
  • Mountain Lion 10.8.0 (with MyHack)


Post install

Cross.png Tick.png
P7H55-M Intel H55 System configuration:
  • Intel Core i3-530 @2.93Ghz OC 3.85 Ghz
  • 8GB Kingston @1333MHz DDR3 (4 x 2GB)
  • Asus GeForce 9800GT 512MB GDDR3
  • Audio Realtek ALC887
  • Ethernet Realtek® 8111E Gigabit LAN
  • HD1 : WD Green 500GB
  • HD2 : WD Green 2TB


Component status:

  • Graphic - worked OOB
  • Webcam - worked OOB
  • PS/2 Keyboard - worked OOB
  • Audio - working with a kext
  • Ethernet - working with a kext
  • Mic (back port) - working with a kext
  • Sleep/Wake - working with SleepEnabler
  • Apple ID - working (iCloud, Message, Facetime, etc...)


Installation method:
  • Mountain Lion 10.8 (myHack 3.1.2) - 3 kexts were removed after installation (myHack will prompt you)
  • Update to 10.8.2 (12C35) - Post Installation also work without updating


Post installation

  • Audio - ALC888b/887 Legacy without DSDT
  • Ethernet - Lnx2Mac's RealtekRTL81xx Ethernet
  • Bootloader's theme changes to Chameleon 2.0
Cross.png Tick.png
P7H55-M PRO Intel H55 System configuration:
  • Intel Core i3-550 @ 3.21 Ghz
  • DDR3 4GB (1x4) 1333 MHz Ram
  • GeForce 450 GTS 1024MB GDDR5
  • Audio Realtek ALC892


Component status:

  • Audio works - Patched AppleHDA + HDAEnabler
  • Ethernet - Realtek RTL8111B/C & RTL8112L
  • USB 2.0 - Native
  • Shutdown/Reboot - Work
  • Sleep - doesn't work
Installation method:
  • Retail Method with Mountain Lion 10.8 (Manually created USB Installer)


Post install

  • Chameleon 2.1 rev 2026 with Sata Module
  • FakeSMC, NullCPUPowerManagement, and Mac Pro 5,1 SMBIOS


NOT Working:

  • Sleep mode. Haven't tried SleepEnabler
Cross.png Tick.png
P7H55-M USB3 Intel H55 System configuration:
  • Intel Core i5-661 @ 3.33 Ghz
  • DDR3 8GB (4x4) 1333 MHz Ram
  • GeForce 430 GT 1024MB DDR3
  • Audio Realtek ALC887


Component status:

  • Audio works - Patched VoodooHDA 2.7.4 - mic is too low
  • Ethernet - Realtek RTL8111E
  • USB 2.0 - Native
  • Shutdown/Reboot - Work
  • Sleep - doesn't work
Installation method:
  • Mountain Lion 10.8


Post install


NOT Working:

  • Sleep mode.
  • Reactivation screen after "Display sleep"
Cross.png Tick.png
P7P55D-E Pro P55 Express System configuration :
  • Intel Core i7 860
  • 2x4Go - 8Go G.Skill Sniper 1866Mhz
  • GeForce XFX GTX260...--> OOB
  • OCZ Vertex 3 - 120Go
  • Iiyama B2712HDS - 27" - 1920x1080
  • Audio VIA VT1828S
  • WiFi : Dlink DWA-556...--> OOB
  • Bluetooth : Belkin F8T016ng..--> OOB


Component status :

  • Audio Works - VodooSeb235 V2
  • Ethernet - RealtekRTL81xx
  • USB 2.0 - Native All
  • USB 3.0 - No tested
  • Shutdown / Reboot - Work
  • Sleep Work - SleepEnabler
Installation method : (with MyHack)
  • Mountain Lion 10.8 app store


Post install KEXT- before installation -> Extra folder in USB ML MyHack

  • FakeSMC
  • RealtekRTL81xx
  • VodooSeb235
  • JMicron36xeSATA
  • JMicron36xSATA


Boot Flags

  • org.chameleon.Boot.plist :

GraphicsEnable=Yes, GeneratePStates=Yes, GenerateCStates=Yes KernelCache=Yes, EthernetBuiltIn=Yes, Kernel=mach_kernel

  • SMBios.plist :

iMac 11,3 or MacPro 3,1


Post install - after installation

  • Chameleon Wizard
  • Trim Enabler for SSD
  • SleepEnabler


Conclusion

  • All work like a iMac 11,3 without DSDT

Sound, Ethernet, Wifi - Mouse, Keyboard - iCloud, iMessage, FaceTime, AppStore ...

Cross.png Tick.png
P5KPL-AM EPU P35+ICH9 System configuration:
  • BIOS 501
  • BIOS: Store Configuration ATA/IDE Enhanced;Enhanced Mode Support:S-ATA; IDE Detect Time: 35
  • Intel Core2Duo E6420 CPU 2.13 GHz
  • XFX GT240 512 mb DDR3 works fully
  • DDR2 4GB (2x2) 800 MHz


Component status:

  • USB 2.0 - Native (All Internal I/O Connectors work, on Back Panel I/O Ports two work, two don't work)
  • Shutdown/Reboot - Work
Installation method:
  • Mountain Lion 10.8 App Store
  • myHack 3.1.2 Guide: [1]


Post install - after installation

  • Sound+Ethernet: from download files: [2]
  • APP STORE & iCLOUD WORK!!! with Champlist 2.4 from download files. Guide: [3]
  • SMBios.plist : iMac 10,1
Cross.png Tick.png
P5KPL-AM/PS G31 Intel ICH7 System configuration:
  • BIOS: 411 Default settings
  • Intel Core2Duo CPU 2.65 GHz
  • GeForce 9500 GT 1024 MB
  • DDR2 4GB (2x2) 800 MHz


Component status:

  • USB 2.0 - Native (All Internal I/O Connectors work)
  • Shutdown/Reboot - Work
Installation method:
  • Mountain Lion 10.8 App Store
  • Standard install. Make Usbbootdisk and install as normal. Boot flag PCIRootUID=0 required. Boot from Usb drive until you get Chameleon or another boot loader installed.


Post install - after installation

  • Ethernet working from install. Sound not working. It requires 10.8.2 patched voodooHDA 2.7.4r63 file [4] to get working.
  • App Store and iCloud working.
Cross.png Tick.png
P5K SE P35+ICH9 System configuration:
  • Pached BIOS to enable AHCI
  • BIOS: Defaults (AHCI for SATA disks)
  • Intel Core 2 QUAD Q6600
  • AMD Radeon HD 6670 1 GB
  • DDR2 4GB (2x2) 800 MHz, dual channel


Component status:

  • USB is working fine (haven't tested all ports though)
  • Shutdown/Reboot working
  • Sleep is not working (never sleeps, even with SleepEnabler)
  • Microphone seems to have a lot of noise
  • Good FPS on games (SC2 and D3)
  • Update to 10.8.1 using AppStore works fine (asked for iCloud config upon login)
Installation method:
  • Mountain Lion 10.8 App Store
  • Chimera
  • If you get a "white screen with a cursor" on the installer it is due to a bug on ATI6000Controller.kext drivers on the installer, you have to remove the /System/Library/Extensions/ATI6000Controller.kext **from the install media** and boot it ignoring caches. Remember to make a copy before, you'll need it later


Post install - after installation

  • Sound: VoodoHD
  • Ethernet: Attansic L1
  • Video: Copy the driver ATI6000Controller.kext (removed from the install media) back to it's location, but now on your HD and fix permissions. Reboot and video should be working at full performance. If you get a "white screen with a mouse" you probably haven't fixed permissions correctly. Boot from the installer media, remove the kext and boot ignoring caches.
  • AppStore and iCloud working with iMac profile
Cross.png Tick.png
P8P67-M PRO P67 (B3) System configuration:
  • Intel Core i5 2400
  • 2X Kingston 4Gb DDR3 1333 CL9 HyperX Blu
  • Nvidia GTS450 1Gb DDR5


Component status:

  • Audio works with ALC892
  • Network works with RTL81xx
  • Shutdown/Reboot works natively
  • Sleep methods: none tested
  • USB: 2.0 native, 3.0 not tested


Installation method:
  • Mountain Lion 10.8 App Store


Post install - after installation

  • ALC892 for audio
  • RTL81xx for wired network
  • Some other bits I'll add shortly


Conclusion

  • All works as expected. Tried all included apps with no problems.
Cross.png Tick.png
P5G41T-M LE Intel® G41 System configuration:
  • Intel Dual Core Duo 2,67 GHz
  • 2 X Kingston 2Gb DDR3 1168 MHz
  • Ati Radeon HD 5450 DDR5


Component status:

  • Audio works with VoodooHDA.kext.0.2.62-10.6
  • Network works with AtherosL1cEthernet.kext
  • Shutdown/Reboot works natively
  • Sleep methods: none tested
  • USB: 2.0 native, 3.0 not tested
  • Bootloader work with Chameleon-2.1svn-r2035.pkg & Extra Kext
Installation method:
  • Mountain Lion 10.8 App Store


Post install - after installation

  • Install kext with Kext Helper b7
Cross.png Tick.png
P5B Intel P965/ICH8 System Configuration:
  • Install method: App Store purchase
  • CPU: Intel Q9650 3GHz Detected as Quad-Core Intel Xeon
  • Memory: Samsung M378T5663EH3-CF73E DDR2 666 MHz 4 x 2Gb, Dual-channel
  • HDD: SAMSUNG HD103SI 1TB SATA
  • Video: ASUS GeForce EN210 Silent 512Mb DDR3
  • Audio: Digidesign MBox2 Pro FireWire, Logitech HD Webcam C510 USB
  • Ethernet: Realtek® PCI-E Gigabit (onboard)
  • Webcam: Logitech HD Webcam C510
  • Bluetooth: D-Link DBT-122
  • Peripherals: Apple Keyboard A1243, Apple Trackpad A1339
  • PCI cards: ST-Lab FireWire Controller (TSB43AB23 chip), UAD-2 SOLO DSP
  • Shutdown: Yes
  • Restart: Yes
  • Sleep: Not tested
  • FaceTime/iCloud/App Store: working


Bootloader:

  • Chameleon v2.1svn r2035
  • SMBIOS: MacPro3,1
Patches:
  • BIOS: SATA in AHCI mode. Disable Serial and Parallel ports. Memory remap, ACPI 2.0, ACPI APIC options enabled.
  • Kexts: FakeSMC, RealtekRTL81xx
  • Kernel flags: npci=0x2000 GraphicsEnabler=Yes EthernetBuiltIn=Yes USBBusFix=Yes
Cross.png Tick.png
P5PL2-E Intel 945G/ICH7 System Configuration:
  • Install method: App Store purchase
  • CPU: Intel C2D E6400 2.13GHz (Overclocked to 2.33Ghz)
  • Memory: Corsair DDR2 667 MHz 2 x 1Gb, Dual-channel
  • HDD: WD5000AADS-00S9B0 500Gb SATA
  • Video: GeForce 9500 GT Silent 1024Mb
  • Audio: M-Audio ProFire 610 (via ST-Lab FireWire Controller vs TSB43AB23 chip)
  • Ethernet: Realtek® RTL8111B PCI-E Gigabit (onboard)
  • Bluetooth: D-Link DBT-122
  • Shutdown: Yes, Restart: Yes, Sleep: Not tested
  • FaceTime/iCloud/App Store: working


Bootloader:

  • Chameleon v2.1svn r2035
  • SMBIOS: MacPro3,1
Patches:
  • BIOS (v0601, 01/19/07): SATA in AHCI mode. Serial and Parallel ports - disabled. Microcode updation, Execute Disable Function, ACPI 2.0, ACPI APIC options - enabled. Enhanced C1 Control, Hyper Path 3, Dram Trolling Threshold, Suspend Mode options - Auto.
  • Kexts: FakeSMC, RealtekRTL81xx, IOPCIFamily (from www.osx86.net).
  • Kernel flags: GraphicsEnabler=Yes EthernetBuiltIn=Yes USBBusFix=Yes


  • If you forget enable Execute Disable Function in BIOS - mach_kernel boot will not start.
  • If you forget copy IOPCIFamily.kext to /S/L/E or /E/E - video will not work.
Cross.png Tick.png
ASUS P8-Z68-M PRO Intel Core i5-3550 @ 3.30GHz System configuration:
  • Intel Core i5-3550 @ 3.30GHz
  • Nvidia GTX550Ti
  • Linksys WMP54GS Wireless Card (PCI)
  • 2 x 4GB G. SKILL RipJawsX @ 1600MHz
  • HANNSPREE SL231 23" 1920 x 1080 LCD Monitor


Component Status:

  • Audio - Works with ALC892
  • Ethernet - Works (Realtek Kext)
  • USB 2.0 - Yes
  • USB 3.0 - Yes
  • Shutdown/Reboot - Yes
  • Sleep - No


Installation Method:
  • Mountain Lion 10.8


Post-Install

  • Kexts


BootLoaders:

  • Chimera


Notes:

  • GTX550Ti works OOB.
  • Turning sleep off via System Settings works with Screen Saver.
  • WEP Wi-Fi causes Connection Timeout. WPA2 works great.
Cross.png Tick.png
P5K Premium/WiFi-AP P35/ICH9R

System Configuration:

  • Intel Q9400 CPU 2.66 GHz @ 3.66 GHz
  • ATI Radeon HD 5670 (1GB) works fully with GraphicsEnabler=y
  • 2x2GB 800 MHz Ram

Component Status:

  • Audio - S-PDIF works
  • Ethernet - Both work
  • Wireless b/g - Untested
  • USB - All Work
  • SATA - All Work
  • IDE - Untested
  • E-SATA - Untested
  • Install Method: Retail Disk Image boot with myHack.
  • Shutdown/Reboot work 99.9% of the time.
Method

Patches

  • Audio use VoodooHDA
  • Ethernet kexts can be found

Not Working

  • Sleep
  • AppStore
  • iCloud
Cross.png Tick.png
P5K PRO P35/ICH9R

System Configuration:

Component Status:

  • Audio - works (VoodooHDA-v2.8.2.x64.ML) perfectly
  • Ethernet - work (IONetworkingFamily.kext) perfectly
  • IEEE 1394 - Work perfectly
  • USB - All Work
  • SATA - All Work
  • IDE DVD LG - Not Work
  • E-SATA - Untested
  • Shutdown/Reboot work
Method
  • Mountain Lion 10.8 App Store
  • Flags: -v PCIRootUID=0 npci=0x3000 this is mandatory with P5K Pro

Post Installation

Patches

Benchmark

Cross.png Tick.png

[edit] Biostar

Hardware Name Chipset Notes Patches Used 32/64bit working with patches

[edit] EVGA

Hardware Name Chipset Notes Patches Used 32/64bit working with patches

[edit] Foxconn

Hardware Name Chipset Notes Patches Used 32/64bit working with patches

[edit] Gigabyte

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
GA-EX58-UD3R (v1.6) Intel® X58 Express Chipset System Configuration

Component Status:

  • Video card works OOB Tick.png
  • Audio Works Perfectly Using DSDT Tick.png
  • DSDT correctly patched at tonymacx86 dsdt page.
  • Sleep Tick.png - Works Perfectly using DSDT
Notes
  • I Have my board flashed to 1.6 FI Bios.
Note Administrator: We don't support tonymac's tools. Cordially
  • Only using FakeSMC, no other hacked kexts.
Cross.png Tick.png
GA-Z68X-UD3H-B3 rev1.3 Intel® Z68 Express Chipset System Configuration:
  • CPU: Intel Core i5 - 2500K
  • GPU: Intel HD3000
  • GPU: Asus EAX6850 DirectCU
  • RAM: Kingstone HyperX 2x4GB 1600Mhz

Component Status:

  • All works

Notes:

  • Install method - Mountain Lion.dmg installed from thumb drive
  • System working w/o DSDT with UEFI U1h BIOS
  • Gigabyte Z68X-UD3H-B3 pack [5] / all-in-one post-installation pack designed specifically for this motherboard and OS X 10.8. Fully patched DSDT included + several useful applications...
Cross.png Tick.png
GA-G31M-ES2L rev1.1 Intel G31 ICH7 Hardware:
  • Intel Core2Duo E7400
  • nVidia 8800GTS 512Mb XFX
  • Network: RTL 8111C
  • Sound: Realtek ALC883
  • GUID Partitioned Disk

Notes:

  • Retail install from 10.8 GM (using a USB Stick)
  • Chameleon RC5 Trunk 1979 (EFI Partition)
  • DSDT + SMBIOS iMac 10,1
  • Works: Speedstep, Ethernet, Audio, Graphics. (Sleep don't work. I think there's a fix somewhere, but I don't use it)
  • EthernetBuiltIn=Yes (For iCloud work) / GraphicsEnabler=Yes / PciRoot=1
  • Kexts used inside /S/L/E (Instal Disk): FakeSMC.kext (3.1.0) + NullCPUPowerManagement.kext from this tutorial: [6]
Kexts
  • FakeSMC.kext (v2.7)
  • NullCPUPowerManagement.kext
  • AppleHDA.kext
  • LegacyALC883.kext
  • LegacyAppleHDAHardwareConfigDriver.kext
  • LegacyHDAPlatformDriver.kext
  • RealtekRTL81xx.kext [7]

The EFI (boot partition) files and all kexts I used: [8]

Cross.png Tick.png
GA-Z68-MA-D2H-B3 rev1.3 Intel 1155 ICH10 Hardware:
  • Intel Sandy Bridge I5 2500k
  • AMD Radeon 6670
  • Network: RTL 8111E
  • Sound: Realtek ALC889
  • GUID Partitioned Disk

Notes:

  • Retail install from 10.8 retail ESD Install.dmg image taken from App Store DL (using a USB Stick)
  • Chameleon RC5 Trunk SVN 2033
  • UEIFI BIOS (Rev H -- Actually Beta but not explicit) -- NO DSDT (not needed as Power Management is now bios func) Only need DSDT if needing to patch HDMI Audio
  • Works: Speedstep, Ethernet, Audio, -- Graphics is a bit tricky. HD2000 will not work this shoud not be a surprise. but AMD card has problems if not addressed with a patch.
  • EthernetBuiltIn=Yes (For iCloud work) / GraphicsEnabler=NO / PciRoot=1
Kexts
  • FakeSMC.kext (v2.7)
  • NullCPUPowerManagement.kext
  • AppleHDA.kext - Patched to work with Non-DSDT systems
  • HDA889Enabler.kext
  • Realtek Drivers 2.0.6 (no need to use LnxToMac's version, standard drivers work fine with this version of Bios.
  • Driver all appear as internal on fresh install (no need to use IOPortInject.kexts)
  • Some report success with the 3.0 USB adapters .... I have found them imperfect... Good luck
Cross.png Tick.png
GA EP45-UD3R Rev 1.1 Intel® P45+ICH10 Hardware:
  • Core2Duo E8400 processor 3.00Ghz
  • Ram 4GB DDR2 800MHz Kingston
  • Saphire ATI HD 5770 1024MB GDDR5 Vapor - X
  • Audio 889a|885 Patched
Kexts
  • FakeSMC in S/L/E
  • NullCPUPowerManagement in S/L/E
  • AppleHDA ALC889a/885
  • Lnx2mac
  • After Finish Install Realtek Gigabit Ethernet 2.0.6 for 10.7
Cross.png Tick.png
GA EP45T-UD3R Rev 1.1 Intel® P45+ICH10 Hardware:
  • Core2Quad Q8300 processor 2.50Ghz
  • Ram 4GB DDR3 1333MHz Kingmax
  • XFX Nvidia GeForce 9600 GSO 1.5 GB
  • Audio 889a|885 Patched

Notes:

  • Graphics = Worked OOB. But not accelerated, so had to inject PCI string.
  • Sound = Worked OOB
  • Network = Worked OOB
  • Sleep = Nope
  • USB = Worked OOB
Kexts
  • FakeSMC in S/L/E
  • NullCPUPowerManagement in S/L/E
  • Lnx2mac
Cross.png Tick.png
GA-945GCM-S2C Intel® 945-ICH7 Hardware:
  • Core Duo E5400 processor 2.20Ghz
  • Ram 4GB DDR2 800MHz
  • GEForce 8400 512
  • Audio ALC662 onboard
  • Realtek 10/100 onboard

Notes:

  • Graphics Enabler=YES
  • Using Chamelon Wizzard I fixed EthernetBuiltIn=Yes, serial number + npci=2000
Kexts
  • Voodoo 2.7.3 from Voodoo Wiki, Fixed IOPCIClassMatch to 0x27d88086 to avoid kernel panic
  • DNDANV50Hal.kext + NVDAResman.kext + NVEnabler fixing ID of GEForce to 0x10c3 0be3
  • iCloud not conecting, so I copy me user home folder from my real Mac
Cross.png Tick.png
GA-X58A-UD3R rev 1.0 X58/ICH10 System Configuration:
  • CPU: Core i7 2.93 GHz
  • GPU: Radeon 6850 1GB
  • RAM: 6GB DDR3 1600MHz
  • Mac OS X Mountain Lion 10.8 Retail

Component Status:

  • All working except WOL, see below.

Notes:

  • Install method: Kakewalk 4.5.1 to create USB stick
  • Remove ATI6000Controller.kext from /S/L/E on install media if using Radeon 6xxx series card and manually reinstall after installation
  • Use Kakewalk again after install to install kexts for network and sound.
  • [www.kakewalk.se]
  • Graphics: Works out of box (GraphicsEnabler=No)
  • Sound: Works after installing kakewalk
  • Miscellaneous: USB 3.0 (Think it is working)
  • Network: Kakewalk install Lnx2Mac 0.0.90 Realtek driver
  • Sleep: SleepEnabler.kext to enable sleep for Kakewalk
  • WOL: not working yet
Cross.png Tick.png
GA-EP43-DS3L Intel P43 System Configuration:
  • CPU: Core 2 Duo E7400
  • Built-in graphics: ATI DH 5670
  • RAM: 4GB DDR2 800MHz
  • Mac OS X Mountain Lion 10.8 Retail - update to 10.8.1

Component Status:

  • Everything works without sleep
Cross.png Tick.png
GA-Z77-DS3H Intel Z77 System Configuration:
  • CPU: Core i5 3570k 3.4 GHz (Ivy Bridge)
  • Built-in graphics: Intel HD4000
  • RAM: 8GB DDR3 1333MHz
  • Mac OS X Mountain Lion 10.8 Retail


Component Status:

  • Everything works!


Notes:

  • Install method: manual creating USB stick
  • userDSDT (but without a DSDT on the dekstop)
  • Repair Permissions
  • Audio>Realtek ALC8xx>Non-DSDT HDAEnabled>ALC887/888b
  • Audio>Realtek ALC8xx>Patched AppleHDA>ALC888b/887
  • Network>maolj's AtherosL1cEthernet (rev 1.1 Atheros AR8161-experimental drivers / rev 1.0 Atheros AR8151)
  • Update Chimera to 1.11.0 to support HD4000
  • DON'T REBOOT just yet!
  • Add this to /Extra/org.chameleon.Boot.plist

<key>device-properties</key> <string>7f0000000100000001000000730000000200000002 010c00d041030a000000000101060000027fff04002c000000 4100410050004c002c00690067002d0070006c006100740066 006f0072006d002d0069006400000008000000000066011400 00006800640061002d0067006600780000000d0000006f6e62 6f6172642d31</string>

  • Reboot and enjoy!
  • Graphics: Works after update of Chimera
  • Sound: Works after installing drives
  • Miscellaneous: USB 3.0 (Detected by Mac OS X as 'SuperSpeed Bus')
  • Network: Works
  • Sleep: not tested yet
  • Other: No sound over HDMI
Cross.png Tick.png
GA-Z77-D3H Intel Z77 System Configuration:
  • CPU: Core i7 3770k 3.4 GHz (Ivy Bridge)
  • Saphire ATi 6670 1gb
  • SanDisk SSD 240gb HDD OOB
  • RAM: 16GB DDR3 1333MHz
  • Firewire 800 PCI Card OOB
  • Mac OS X Mountain Lion 10.8.1 Retail


Component Status:

  • Everything works!


Notes:

  • Install method: manual creating USB stick, remove ATI6000Controller.kext out of S/L/E folder, you will need it later.
  • Install ML as normal, let it restart, but leave USB in, (otherwise you'll get an Boot0 error), you will need to use the USB to come up to the menu, to choose which HDD to start up with, select the installed ML HDD, launch it, then install FakeSMC, Maolj's AtherosL1 ethernet & Chimera 1.11.1. ""Before YOU"" restart, make sure you remove ATI6000Controller.kext and use the one that you took out earlier due repair permissions.
  • DON'T REBOOT just yet!
  • Then Add this to /Extra/org.chameleon.Boot.plist

<key>Graphics Mode</key> <string>1680x1050x32</string> <key>Kernel Flags</key> <string></string> <key>Quiet Boot</key> <string>Yes</string> <key>AtiConfig</key> <string>Pithecia</string> <key>AtiPorts</key> <string>3</string> <key>GraphicsEnabler</key> <string>Yes</string>

  • Reboot and enjoy!


Comments Hackintosh wakes up if you set to startup or wake via Energy Saver, works OOB!!! Z77-D3H is the best Hackintosh Ive ever worked with, logicboard is OOB including sleep which I was impressed. Would recommend it to anyone. Time Machine works but havent restored it yet. iPhoto/iTunes works, AppStore works even updated via AppStore.

  • Graphics: Works after update of Chimera
  • Sound: Untested upto date
  • Miscellaneous: All USB, including USB 3.0 (Detected by Mac OS X as 'SuperSpeed Bus')
  • SATA 3 works - OOB
  • BlueRay burner works
  • Network: Works
  • Bluetooth USB works OOB - using Apple KB & Mouse
  • Sleep: Works OOB - no mods
  • ATi 6670 card works with DVD Player, has full QE and resolutions. You need to install AppleIntelIntegratedFramebuffer.kext for different video resolutions. DVI & VGA works, HDMI hasnt been tested yet.
Cross.png Tick.png

[edit] Intel

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Intel DG31PR (Bios 0071) Intel G31 ICH7 System configuration:
  • Intel Core 2 QUAD Q6600
  • Chipset Intel G31
  • NVIDIA GeForce 9500 GT 1GB GDDR2 (GraphicsEnabler)
  • Audio ALC888
  • RTL8111GR integrated Gigabit Ethernet
  • Wi-Fi - USB Encore ENUWI-N3 (Driver USB RT2870)
Installation method: and EXTRA

Post install.

Working:

  • Shutdown / Reboot
  • Mac App Store / iCloud
  • Graphics acceleration QE / CI

NOT Working:

  • Sleep mode not work!
Cross.png Tick.png
Intel DH61WW H61 System configuration:
  • Intel Core i7 3.39 GHz
  • Chipset Intel® H61 Express
  • GeForce GT 620 1024 MB
  • Audio Realtek ALC892
  • Intel® 82579V Gigabit Ethernet
Installation method: and EXTRA
  • Mountain Lion 10.8 (Tutorial)
    • (If black Screen use PCIRootUID=0 on start)

Post install.

  • Driver Audio -> Realtek ALC8xx -> Without DSDT -> ALC892
  • Driver Network -> hnak's AppleIntelE100e Ethernet

Working:

  • Shutdown / Reboot
  • Mac App Store / iCloud
  • Graphics acceleration QE / CI

NOT Working:

  • Sleep mode not work!
Cross.png Tick.png
Intel DH55HC H55 System Configuration:
  • OS X Mountain Lion GM
  • CPU: Intel core i3 540 @ 3.07GHz
  • GPU: Zotac GeForce 8400GS 512MB DDR3
  • RAM: 2x2GB DDR3 1333MHz Kingston
  • ODD: LG GH22NS30
  • Keyboard: USB
  • Mouse: USB

Functionality:

  • All works well (onboard sound - not tested as I use a Creative SoundBlaster USB soundcard)
  • Zotac GeForce 8400GS works OOB with graphics enabler=yes. Tested HDMI only, resolution at 2048x1152
  • As with Lion, at shutdown, the OS shuts down, but the computer stays running (seems to be a problem with Intel boards)
* Followed tutorial Here
  • FakeSMC.kext
  • NullCPUPowerManagement.kext
  • SMBIOS Mac Pro 3.1

NOTE: also installs easily with MyHack following default prompts

Cross.png Tick.png
Intel DH55PJ H55 System Configuration:
  • OS X Mountain Lion
  • CPU: Intel core i3 540 @ 3.06GHz
  • GPU: Asus Nvidia GeForce 8400GS 1GB DDR3
  • RAM: 2x2GB DDR3 Ram
  • ODD: LG GH22NS50
  • HDD: Seagate Barracuda ST3500418AS 500GB
  • Keyboard: USB Wireless
  • Mouse: USB Wireless
  • Wifi: Belkin N150 Wireless USB adapter

Functionality:

  • All works well
  • Nvidia GeForce 8400GS works OOB without any flags.
  • At shutdown, the OS shuts down, but the computer stays running (seems to be a problem with Intel boards)
  • Sleep Does not work. Disabled from Preferences.
  • Used VooDoo 0.2.7.3
How I Did It
  • Followed a guide from Google search
  • For Wifi Adapter Installed Realteak 8188SU Mac 10.7 install package from HERE
Cross.png Tick.png
Intel DG31PR Intel G31 System configuration:
  • Intel Core 2 Duo E7400
  • Chipset Intel G31
  • NVIDIA GeForce GT240 1GB GDDR5 (GraphicsEnabler)
  • Audio ALC888 (Modified AppleHDA and HDAEnabler courtesy of Elad Nava)
  • RTL8111GR integrated Gigabit Ethernet (Official Realtek AppleRTL8169Ethernet.kext)
Installation method:
  • Mountain Lion 10.8 Retail (App Store version)
  • Used FakeSMC, Elad's HDAEnabler, Chameleon, GraphicsEnabler, and PS2 keyboard and mouse kexts. ML was pre-cooked using MyHack prior to installation.

Working:

  • Shutdown/Reboot
  • Mac App Store
  • Graphics acceleration (2D/3D)
  • Most applications including Adobe Premiere (as using graphics injectors like NVDarwin seems to crash the latter)
  • Peripherals such as printers (namely an Epson L100 and an HP Deskjet all-in-one) work normally

NOT Working:

  • Sleep mode powers down the system rather than putting it to sleep as intended.
Cross.png Tick.png
DX58SO Intel X58 System Configuration:
  • CPU: Intel core i7 950 3.07GHz (Stock)
  • GPU: Radeon Sapphire 5770 Vapour-x 1GB DDR5 (Works with GE = YES or NO)
  • RAM: 6GB DDR3 1333MHz
  • Wifi- DLink DWA 125 (Ralink Driver)
  • Retail Install
  • BootLoader : Chamaleon 2.1 RC5 r1820

Extra:

  • org.chameleon.Boot.plist
  • smbios.plist (Mac Pro 4.1)
  • dsdt.aml

Boot Flags:

  • GraphicsEnable=Yes
  • GeneratePStates=Yes
  • GenerateCStates=Yes
  • KernelCache=Yes


Kexts:

S/L/E

  • FakeSMC
  • AppleHDA(patched)
  • AppleIntel8256X
  • Legacy889HDA


Functionality:

  • Everything works flawless. Video, Audio, Lan , Firewire, Wifi
  • Power Management works with no Kext.
  • Shutdown and Sleep works with no Kext.
  • Geekbench: 11.000 aprox.
  • Cinebench: 6 aprox.
  • GPU 37 Fps


VIDEO DEMO

Patches
  • DsdtAutoPatcher link

Patches: DTGP, IRQS, SBUS, SHUTDOWN, LPC ICH10, REMOVED DEVICES, MUTE, AHCI ORANGE ICON, AZAL TO HDEF, HDEF, ALC889

Cross.png Tick.png
DG41RQ Intel G41 (ICH7) * BIOS: Ver 17 2011
  • Install Method: clean install into a NEW Partition
  • CPU: Intel E7500 core 2 Duo 2.93GHz
  • MotherBoard: Intel DG41RQ (perfect board)
  • Video: ASUS GeForce 210 1GB DDR3 - works OOB (QE/CI)
  • RAM: DDR2 800Mhz 2GBx2
  • DVD: LG DVD-RW SATA
  • HDD: WD 500GBx2 SATA
  • Monitor 19 LCD: VGA
  • onboard Ethernet - works
  • onboard Audio - Not working (Using $2 USB Sound card from ebay)
  • Custom DSDT
  • DSDT generated by MaLd0n's DSDT Auto-Patcher
  • Audio - Using USB sound card (try VoodooHDA 0.2.6.1 or 0.2.5.6 mostly causes KP in ML)
  • Ethernet - Check Lnx2Mac's Realtek RTL81xx Driver
  • keyboard&Mouse - Logitech k200 KB & Microsoft m100 Mose works OOB (ps\2 Key Mouse try Voodoops2controller (32 bit only)
  • Video - ASUS Geforce 210 1GB (works OOB with GraphicsEnabler=Yes)(QE/CI)
  • PCI Configuration begin - no just stays for 10sec and boots up
  • Monitor 19: VGA Fixed to 1368x768@60Hz Using ConfigX
  • Sleep & Wakeup - not Working
  • BIOS SETUP - 1. Load default on BIOS, 2.Setup drive mode Legacy and SATA only, 3.Boot->UEFI->Enable
  • I have dual boot windows and LION on GPT, windows7 was already installed
  • LAN, Graphics Perfectly contact macdom648@gmail.com
Cross.png Tick.png
DG41WV Intel G41 (ICH7)
  • Install Method: clean install into a NEW Partition (or pendrive) with Chimera 11.1.
  • CPU: Intel E3400 Celeron Dual Core 2.60GHz
  • MotherBoard: Intel DG41WV
  • Video: Geforce 8400GS 512MB - GraphicsEnabler=Yes (QE/CI)
  • RAM: DDR3 800Mhz 2x2GB
  • DVD: LiteOn DVD-RW SATA
  • HDD: WD 500GB and SAMSUNG 500GB SATA
  • Monitor 19 LCD: DVI
  • onboard Ethernet - works
  • onboard Audio - ALC662 works with VoodooHDA 2.7.4 (edited kext with DEVID&VENDID)
  • Bootloader: both Chimera and Chameleon works (latest versions)
  • DSDT (with andrehtm's help - HMBT)
  • Audio - VoodooHDA 2.7.4 (no KP)
  • Ethernet - Check Lnx2Mac's Realtek RTL81xx Driver
  • Mouse and Keyboard USB
  • Video - Geforce 8400GS 512MB - GraphicsEnabler=Yes (QE/CI)
  • PCI Configuration begin - no just stays for 10sec and boots up
  • Monitor 19: DVI 1440x900
  • Sleep & Wakeup - not Working
Cross.png Tick.png

[edit] MSI

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
MSI Z68MA-G45 (B3) System configuration:
  • i5 2500(Non K) 3.3GHZ
  • DDR3 1600MHZ (OC'd) SuperTalent Ram
  • GeForce GTX 560 Ti 1024MB
  • Realtek ALC892


Component status:

  • Audio works with ALC892.kext
  • Ethernet - Works Native
  • USB 2.0 - Works natively. Unknown if USB 3.0 is working but all ports are working correctly.
  • Shutdown/Reboot - Work
  • Sleep Works fine
  • Doesn't wake.
Installation method:
  • Mountain Lion 10.8 from App Store (then updated to 10.8.1 with software update)
POST INSTALL:
  • ALC892 audio with NON DSDT
  • GTX500 Fermi OPENCL patch. Rest works.

NOT Working:

  • Just wake. The rest all works
Cross.png Tick.png

[edit] Graphics Cards

Please specify if your card is AGP, Integrated, PCI or PCI-E.
Also, place chip and board manufacturer in their respective column.

[edit] PCI-E

[edit] AMD/ATI

Model Board-Manufacturer Notes QE/CI Output Dual display Compatible 64bit
Radeon HD 4830 Sapphire
  • Using QE_CI Exotic patch for HD48xx cards
  • Chameleon 2.0 RC5 (or the most recent) or PCEFI 10.6 Lion + Snow
  • GraphicsEnabler=Yes
Tick.png DVI / DVI Not tested Tick.png
HD4850 512 Mb XFX
  • Exotic 10.8/10.8.1 patch
  • GraphicsEnabler=Yes
Tick.png DVI / DVI Not working Tick.png
Radeon HD 6770 Sapphire
  • Using DSDT Inject method
  • Chameleon 2.0 RC5 (or the most recent) or PCEFI 10.6 Lion + Snow
  • GraphicsEnabler => No more need!!!
Tick.png DVI / HDMI / VGA Not tested Tick.png

[edit] NVIDIA

Model Board-Manufacturer Notes QE/CI Output Dual display 32/64bit working
GT610 MSI Need to find NVDAGF100Hal kext (not the installer package).

Do show content and modify Info.plist to add 0x104a10de&0xffc0ffff Then install the kext , check GraphicsEnabler is yes in boot file.

Tick.png VGA 1680x1050 Not tested Not tested Tick.png

[edit] Integrated

[edit] INTEL

Model Board-Manufacturer Notes QE/CI Output Dual display 32/64bit working

[edit] Network Cards

[edit] Wireless

Interface Standard Device Manufacturer Chipset Notes 32/64bit working
USB 8021.11a/b/g/n W522U Tenda Ralink RT3572 PCI device:0x3572 vendor id:0x148f. Use driver for Ralink USB 3x7x provided at [9]. Use Ralink wireless utility to configure. Seen as "802.11n WLAN" USB device, not as Airport device. Cross.png Tick.png
mini PCIe 802.11 b/g/n AR5B91 Atheros AR9281 Working OOB. Seen as Airport Extreme Cross.png Tick.png
mini PCIe 802.11 b/g Dell DW1390 Broadcom-based BCM4311 Working OOB. Seen as 3rd party card. Cross.png Tick.png
mini PCIe 802.11 a/b/g Dell DW1490 Broadcom-based BCM4311 Working OOB. Seen as 3rd party card. Cross.png Tick.png
mini PCIe 802.11 b/g Dell DW1395 Broadcom-based BCM4312 Working with patched BCM43xxxFamily kext. Seen as 3rd party card. Cross.png Tick.png
1/2 mini PCIe 802.11 b/g Dell DW1397 Broadcom-based BCM4312 Working with patched BCM43xxxFamily kext. Seen as 3rd party card. Cross.png Tick.png

[edit] Wired (Ethernet)

Interface Standard Device Manufacturer Notes 32/64bit working with patch

[edit] Sound Cards

Interface Hardware Name Manufacturer Notes 32/64bit working with patch
USB Creative Soundblaster X-Fi Surround 5.1 Pro Creative working OOB Cross.png Tick.png

[edit] Other Accessories

Type of Accessory Item Description Manufacturer Notes 32/64bit working with patch
Webcam Logitech C270 Logitech working OOB Cross.png Tick.png
Webcam VendorID = Silicon Motion, Inc. - Taiwan Unknown working OOB Cross.png Tick.png
Webcam Hercules HD Twist Guillemot Corporation working OOB Cross.png Tick.png
Webcam HP Webcam HD-3110 Hewlett Packard working OOB Cross.png Tick.png

This page was last modified on 19 March 2014, at 17:44.
This page has been accessed 175,697 times.
Powered by MediaWiki © 2013 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers