HCL 10.8.2/Portables

From OSx86
Jump to: navigation, search
OS X 10.8.2
Hardware Compatibility

This is a hardware compatibility list for portable computers. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying a portable computer. Don't forget to add how you got OSx86 running on your portable x86 computer, and to use proper English. Please see the discussion page for proper instructions on how to input your system specs. Also, please contribute to the HCL 10.8.2 page, which should list a more granular view of compatibility. If your computer isn't listed, you should try it if you have a SSE2 or higher processor. Use vanilla kernel if it is supported.

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for 10.8.2 builds only.

Please list your computers in alphabetical order by manufacturer (Asus, Acer, Dell, HP, etc)

For how to edit the Wiki, please see this thread. Thank you!

Note: Please add whether your device supports QE, Quartz Extreme, graphics. Try playing a movie with Quicktime Player.
Note: For suggestions about table headings, please join the discussion here.


Contents

[edit] Acer

[edit] Aspire 2920

  • Install Method: OS X Mountain Lion 10.8.0 with myHack 3.1.2 + combo update 10.8.2+10.8.2 supplemental from Software Update
  • Bootloader: Darwin/x86 boot v5.0.132 : Chameleon 2.1 : myHack 3.2
  • Kexts: Need Kexts for battery,wi-fi(Intel),Ethernet,Webcam(Crystal Eye),Audio
Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Processor Intel Core 2 Duo T5750 2.0Ghz Tick.png Native support Cross.png Tick.png
Video Card Media Accelerator X3100 Tick.png Native support Cross.png Tick.png
Chipset Intel Tick.png Native support Cross.png Tick.png
Audio Realtek ALC268 Tick.png VoodooHDA.kext Cross.png Tick.png
WiFi Intel® PRO/Wireless® 3945ABG Tick.png Using - Cross.png Tick.png
Ethernet Broadcom NetLink (TM) Gigabit Tick.png Using BCM5722D.kext Cross.png Tick.png
Touchpad and keyboard Tick.png Native support Cross.png Tick.png
Brightness control Tick.png Using AppleACPI.kext Cross.png Tick.png
Sleep Cross.png black screen when sleeping Cross.png Cross.png
Battery Tick.png Using VoodooBattery.kext and VoodooPowerMini.kext Cross.png Tick.png
Card Reader Tick.png Native support Cross.png Tick.png
Integrated Camera Acer Crystal Eye Tick.png Using - Cross.png Tick.png
Bluetooth Broadcom Tick.png Native support Cross.png Tick.png

[edit] Aspire 4752

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Processor Intel Core i5 2450M 2.4Ghz, turbo boost 3,1GHz (Use SSDT to enable TB) Tick.png Native support Cross.png Tick.png
Video Card Intel HD Graphics 3000 Tick.png Native support, also requires patch to enable VGA output Cross.png Tick.png
Chipset Intel Tick.png Works via AHCI_3rdParty_SATA Cross.png Tick.png
Audio Realtek ALC269 Tick.png VoodooHDA.kext (2.8.2) Cross.png Tick.png
WiFi Broadcom BCM943227HM4L Cross.png Doesn't work, swapped to Atheros AR5B93 Cross.png Cross.png
Ethernet Broadcom NetLink (TM) Gigabit Tick.png Using BCM5722D.kext Cross.png Tick.png
Touchpad and keyboard Synaptics PS2 Tick.png Vía ApplePS2Controller Cross.png Tick.png
Brightness control Tick.png Works via DSDT.aml Cross.png Tick.png
Sleep Tick.png Works via DSDT patching Cross.png Tick.png
Battery Tick.png Using AppleSmartBatteryManager.kext Cross.png Tick.png
Card Reader Tick.png Native support Cross.png Tick.png
Integrated Camera 1,3Mpx 720p Integrated USB Camera Tick.png Native Support Cross.png Tick.png

[edit] Axioo

[edit] HNM 3120 R

  • Install Method: OS X Mountain Lion 10.8.2 with Transmac USB boot
  • Bootloader: Darwin/x86 boot v5.0.132 : Chameleon 2.1
  • Kexts: Need Kexts for battery,wi-fi(Intel),Ethernet,Webcam(Crystal Eye),and touchpad
Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Processor Intel Core i3-2330 2,2Ghz Tick.png Native support Cross.png Tick.png
Video Card Intel HD3000 Tick.png Native support Cross.png Tick.png
Chipset Intel 6 Series Tick.png Native support Cross.png Tick.png
Audio Realtek unknown version Tick.png VoodooHDA.kext Cross.png Tick.png
WiFi unknown Tick.png Using - Cross.png Tick.png
Ethernet Realtek Tick.png unknown Cross.png Tick.png
Touchpad and keyboard Tick.png Native support Cross.png Tick.png
Brightness control Tick.png Using AppleACPI.kext Cross.png Tick.png
Sleep Cross.png black screen when sleeping Cross.png Cross.png
Battery Tick.png Using VoodooBattery.kext and VoodooPowerMini.kext Cross.png Tick.png
Card Reader Tick.png Native support Cross.png Tick.png
Integrated Camera Acer Crystal Eye Tick.png Using - Cross.png Tick.png
Bluetooth Broadcom Tick.png Native support Cross.png Tick.png

[edit] Asus

[edit] ASUS N53sm X5MS series

Proof: http://www.youtube.com/watch?feature=player_detailpage&v=4FdU6p2yZ0k

Guide: http://www.insanelymac.com/forum/topic/282471-asus-n53sm-mountain-lion/

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Processor Intel Core i7 2670M 2.20Ghz Working Native support Cross.png Tick.png
Video Card Intel HD3000 Working (but without VGA and HDMI out) Native support (SMBIOS for MacbookPro8,2 inside Extra folder). Cross.png Tick.png
Chipset Sandy Bridge Working Native support Cross.png Tick.png
Audio Realtek ALC269 Working VoodooHDA Cross.png Tick.png
WiFi Atheros 9285 Working By inject device into kext Cross.png Tick.png
Ethernet RTL8111/8168B Working Using RealtekRTL81xx.kext Cross.png Tick.png
Touchpad and keyboard Elan touchpad Working (with 2-finger scroll) Using ApplePS2Controller.kext Cross.png Tick.png
Brightness control Working Using AppleACPI.kext Cross.png Tick.png
Sleep Not Working black screen when sleeping Cross.png Cross.png
Battery ASUS Working Using modified AppleSmartBatteryManager.kext Cross.png Tick.png
Card Reader NO NAME Working Native support Cross.png Tick.png
Integrated Camera ASUS WEB CAM Working Using iGlasses Cross.png Tick.png
Bluetooth AzureWave Working Using IOath3kfrmwr.kext Cross.png Tick.png

[edit] ASUS A55VD (K55VD)

Specification: http://my.asus.com/Notebooks/Versatile_Performance/A55VD/

Install Method : Custom 10.8 thumbdrive installer+chameleon (ML ready)+combo update 10.8.2+10.8.2 supplemental update. Can use myhack method to make thumbdrive installer. Different post install workaround though. Also work with iatkos ml 2 all tested can work.

Bootloader : atm efi Clover_v2_rL828 , before i use chameleon (ML ready).

SMBIOS : Macbook Pro 10.1 retina.

Additional note: boot safe mode (-x) to get into desktop until you patch NVDAGF100Hal.kext.

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Processor Intel Core i3 2330M 2.20Ghz Working Native support Cross.png Tick.png
Video Card NVdia GForce610M Native support (VGA Out Working-HDMI Untested) Native support (add 0x105010de&0xffe0ffff string under IOPCIPrimaryMatch on NVDAGF100Hal). Cross.png Tick.png
Chipset Sandy Bridge Working Native support Cross.png Tick.png
Audio Realtek ALC269 Working Patched AppleHda , IOAudioFamily and HDEF section on DSDT Patch Cross.png Tick.png
WiFi Atheros 9285 Working By inject device into kext Cross.png Tick.png
Ethernet RTL8111/8168B Working Using RealtekRTL81xx.kext Cross.png Tick.png
Touchpad and keyboard Elan touchpad Working (multitouch) Cross.png Tick.png
FnKey Working Cross.png Tick.png
Sleep Working Using sleepenabler.kext and dsdt patch Cross.png Tick.png
Battery ASUS Working AppleSmartBatteryManager.kext Cross.png Tick.png
Card Reader NO NAME Detected but not working Cross.png Cross.png
Integrated Camera Alcor Working, detected as Facetime Camera Using facetime.kext and camtwist Cross.png Tick.png
Bluetooth AzureWave Working Using IOath3kfrmwr.kext Cross.png Tick.png
USB 3.0 Asmedia Working DSDT patch and kext refer here Cross.png Tick.png

[edit] Casper

[edit] EAA-89

I installed iAtkos ML2 and did the following:

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
CPU Intel C2Duo P8700 2.53GHz N/A Speedstep working with a specific version of VoodooPowerMini.kext Cross.png Tick.png
Bluetooth N/A Working Native Support Cross.png Tick.png
USB Card Reader N/A Not Working Didn't care Cross.png Cross.png
Wi-Fi BCM94312 Working Working with patched IO80211Family.kext Cross.png Tick.png
Audio Realtek ALC268 Working Working with VoodooHDA.kext Cross.png Tick.png
Graphics NVIDIA GeForce 9600M GS 512MB Working with QE/CI Enabled Working with a modified SMBIOS (MacPro3,1 or MacPro4,1), a patched AppleGraphicsPowerManagement.kext and an up-to-date Chameleon bootloader Cross.png Tick.png
Touchpad Synaptics Working Working with the patch included in iAtkos ML2 Cross.png Tick.png
Sleep N/A Not working Proper DSDT and SSDT edits needed in order to make it work Cross.png Cross.png
Battery Indicator N/A Works with the patch included in iAtkos ML2 Working Cross.png Tick.png

[edit] Clevo

[edit] W255EU

  • also called LDLC Aurore BB3-I5-8-H6
  • Install Method: iAktos ML2
  • Bootloader: Chameleon 2.1 from iAktos ML2
  • Motherboard : W240/W250/W260
  • SMBIOS : MacBookPro9.1
  • Soon a guide will be available on the forum
Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Processor Intel Core i5-3230M @2.6 GHz Working Native support Cross.png Tick.png
Video Card Intel HD 4000 Working Native support. ig-platform-id:01660003 set in DSDT.aml. Cross.png Tick.png
Chipset Intel mobile HM76 Express Working AHCI_Extended_Injector.kext used to avoid still waiting for root device Cross.png Tick.png
Audio VIA ?????? & Intel HD4000 HDMI Working VoodooHDA.kext & Not tested yet. Cross.png Tick.png
USB3/2 Intel Chipset Working Usb2 key on usb 3 work Cross.png Tick.png
WiFi Intel Centrino Wireless-N 2230 Not Working Can't work. have to change Cross.png Tick.png
Ethernet Realtek Gigabit RTL8168E-VL/8111E-VL Working Using RealtekRTL81xx.kext from iAktos ML2 install Cross.png Tick.png
Touchpad and keyboard Synaptics TouchPad Working Using VoodooPS2.kext Cross.png Tick.png
Control keys Keyboard by Clevo. using French AZERTY. Working Play pause:Tick.png/TouchPad:Tick.png/Brightness:Tick.png/Sound::Tick.png/Webcam:Tick.png/Wifi:Cross.png/Bluetooth:Cross.png Cross.png Tick.png
Sleep Not Working black screen when sleep Cross.png Cross.png
Battery unknow Working Using VoodooBattery.kext Cross.png Tick.png
Card Reader Realtek card reader Not Working don't know Cross.png Cross.png
Integrated Camera Chicony USB 2.0 Camera Not Working Detected,software try to turn it on but no picture Cross.png Cross.png
Bluetooth Intel Centrino Wireless-N 2230 Not Working nope Cross.png Cross.png

[edit] Dell

[edit] Latitude D630/D830 & Precision M2300/M4300

  • Description (see http://www.osxlatitude.com for details)
  • Install Method: OSXLatitude -> follow this link for all the necessary details.
  • Use Kozlek latest FakeSMC + plugins to obtain native SpeedStep + better GPU handling.
Hadrware name Chipset Notes Patches Used Compatible 64bit
Processor FSB800 C2D CPUs such as T7x00, T8x00, T9x00 Disable IDA in BIOS with Merom T7x00 CPU or FSB speed will be reduced Tick.png
Video Card D630: nVidia Quadro NVS 135M
D830: nVidia Quadro NVS 135M & 140M
M2300/M4300: nVidia Quadro FX 360M
D630/M2300: WXGA, WXGA+ LCDs
D830/M4300: WXGA, WSXGA+ & WUXGA LCDs
Tick.png
Chipset Intel GM965 Tick.png
Audio Sigmatel STAC 9205 with VoodooHDA 2.7.x or 2.8.x Tick.png
WiFi Mini PCIe card that are supported OOB by Mac OS X (DW1390, DW1490, DW1510, Atheros AR5B91)
Non-OOB cards too (DW1395, DW1397)


Use BCM43xxxFamily kext for non-OOB Broadcom cards
Tick.png
Ethernet Broadcom NetXtreme 57xx Gigabit Ethernet with BCM5722D kext Tick.png
Touchpad and keyboard ALPS ANV-Slice kext works best Tick.png
Brightness control natively supported Tick.png
Sleep natively supported Tick.png
Battery With battery manager kext such as Voodoo or Smart Battery Tick.png
Card Reader N/A Tick.png
Integrated Camera N/A Tick.png
Bluetooth Dell branded CSR modules work OOB (DW350, DW360) Patch CSR BT module controller kext to support enabling/disabling within Mac OS X + Wake from BT Tick.png

[edit] "Inspiron 7720"

  • Notes:
    • Guide at [1]
    • Extra information [2]
Hardware Name Chipset Notes Patches Used 32/64bit working with patches
CPU 2.3-GHz Intel Core i7-3610QM Works OOB Cross.png Tick.png
SATA Chipset Mobile Intel® 7 Series Express Chipset (HM77) Works OOB Cross.png Tick.png
Graphics Intel HD4000/NVIDIA GeForce GT 650M Works / GeForce does not work - Disable in DSDT. DSDT Injection Cross.png Tick.png
Audio IDT 92HD91BXX Works - No line in. Patched AppleHDA/DSDT Injection Cross.png Tick.png
Network Wired Realtek RTL810SE Gigabit Ethernet: Works Official Realtek driver Cross.png Tick.png
Network Wifi Intel® Centrino® Wireless-N 2230 + BT 4.0 Bluetooth works OOB - Replace the card with a compatible one (Atheros AR9285). Cross.png Cross.png

[edit] Fujitsu

[edit] AH530/GFX

Used iAtkos ML2 (10.8.2) to install Mountain Lion.

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
CPU Intel Core i3 Arrendale 2.40GHz Working. N/A Cross.png Tick.png
Bluetooth Cambridge Silicon Radio Working. Native Support Cross.png Tick.png
USB Card Reader Working Native Support Cross.png Tick.png
Wi-Fi Atheros AR9285 Working. Patched with "Wireless" kext from iAtkos ML2 Cross.png Tick.png
Audio Realtek ALC288 Working. Patched AppleHDA.kext Cross.png Tick.png
Graphics AMD Mobility 4650 with 1GB Working with QE/CI, 1GB shown Patched with this particular kext. Cross.png Tick.png
Touchpad Synaptics PS/2 Patch Working Cross.png Tick.png
Sleep Not working Cross.png Cross.png
Battery Indicator Working with patches. Working Cross.png Tick.png

[edit] Hewlett Packard

[edit] EliteBook 8440p

Installation media:

Bootable USB-Stick made with the original "Apple Mountain Lion Installation App" (10.8.0 12A269) from the Appstore.

Installation method (without DSDT):

  • Boot from the prepared USB-Stick with connected USB-Keyboard & mouse (no boot-flags needed)
  • After successfull installation: Restart (using USB-Stick as "Bootloader"), boot up the new ML-Installation and setup your working OS X for the first start. Graphics and webcam should work at this time (KB & mouse still via USB)
  • Install PS2-Drivers for ML from Google search. - Now keyboard, trackpad and stickpoint should work
  • After reboot OS X should boot and shut-down without any CMOS-problems
  • Install "AppleIntelE1000e.kext" from the file called "HP 8440p kexts" (Download here). – After reboot the Ethernet-card should work.
  • Install "AppleACPIPlatform.kext" and "VoodooBattery.kext" to get Battery-Symbol work. You find the kexts in file "AppleACPIPlatform & VoodooBattery" v1.3.6 (Download here)


Update to 10.8.1:

Original Apple-update working fine


Update to 10.8.2:

"ACPI rollback" is the key! - After 10.8.2 update installation you have to change the "AppleACPIPlatform.kext" with an older Version like 10.8.1. - I changed it with the file from the Battery-Symbol-Driver I wrote above.

  • Install "10.8.2 Update" from Appstore and do not restart !
  • Delete "AppleHDA.kext" under S/L/E
  • Change "AppleACPIPlatform.kext" with older version (use Kext Utility or other)
  • Reboot system
  • Install "10.8.2 Supplemental Update" from Appstore
  • Reboot system and enjoy


Soundcard:

Use VoodooLoader.app from here and take a look at this guide. - the "VoodooLoader.app" runs the "VoodooHDA.kext" which is located under "VoodooLoader.app/Contents/Rescources/" after system-boot is finished and stable. I´m using the latest version (2.7.4) of "VoodooHDA.kext" in that path. I edited "info.plist" located in the kext as described here (Solution 2 with Vendor-ID: 8086 and Device-ID: 3b56). To get the Volume Slider work, you also have to change the value as described here.


DSDT:

I found that DSDT after I installed OS X 10.8.1 - So I installed the DSDT (and removed the "UseKernelCache=Yes" in "org.chameleon.Boot.plist" after install, because the trackpad didn't work any more). After that, everything works fine and I think the System is now loading faster than without the DSDT. - You have to decide for yourself if you want to use it or not.


Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Processor Intel Core i5 540M 2.53Ghz Working Native support Cross.png 32bit not tested / Tick.png
Video Card NVidia 3100M Working Native support Cross.png 32bit not tested / Tick.png
Chipset Sandy Bridge Working Native support Cross.png 32bit not tested / Tick.png
Integrated Camera Internal built-in Working Native support Cross.png 32bit not tested / Tick.png
Bluetooth Broadcom Working Native support Cross.png 32bit not tested / Tick.png
Ethernet 82577LM Gigabit Network Connection Working Using AppleIntelE1000e.kext from here Cross.png 32bit not tested / Tick.png
Touchpad, stickpoint & keyboard Internal built-in Working Using "PS/2 Keyboard/Mice and Trackpads" Driver Cross.png 32bit not tested / Tick.png
Battery Internal built-in Working Using this kexts Cross.png 32bit not tested / Tick.png
Audio 5 Series/3400 Series Chipset High Definition Audio (Ven-ID 8086 / Dev-ID 3b56) Working No Sound-KEXT in S/L/E - Using VoodooLoader.app and edited VoodooHDA.kext v2.7.4 Cross.png 32bit not tested / Tick.png
WiFi Centrino Ultimate-N 6300 Not Working Cross.png 32bit not tested / Cross.png
Card Reader Internal built-in Not Working Cross.png 32bit not tested / Cross.png
Sleep - Not Working Black screen with HDD running when sleeping, wakeup not possible Cross.png 32bit not tested / Cross.png

[edit] Envy 17 3270nr

Notes Trying to install from USB stick results in 'waiting for boot device', presumed to be due to the default USB drivers not working. The solution was to copy the USB installer to a spare partition on the internal hard drive (I used gparted on ubuntu), then boot from the USB stick, but select the partition on the HDD at the boot menu. Had most luck with myhack installer. Need to boot with GraphicsEnabler=no cpus=1.

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Processor Intel Core i7 3610QM working OOB Cross.png Tick.png
Chipset
  • Mobile Intel HM76 Express
working OOB Cross.png Tick.png
Graphics 1 Radeon 7850M Not working
Graphics 2 Intel HD4000 working (QE supported) Requires modified org.chameleon.Boot.plist file, see here: http://www.nikvdp.com/technotes/?p=184

Set <key>device-properties</key> <string>8800000001000000010000007c0000000200000002010c00d 041030a000000000101060000027fff0400100000006d006f006400650 06c0000001a000000496e74656c20484420477261706869637320343 030302c0000004100410050004c002c00690067002d0070006c006100 740066006f0072006d002d006900640000000800000004006601</string> (remove line breaks)

Cross.png Tick.png
External Monitor HDMI Working (mirror only, not extend desktop), DisplayPort unknown
Audio Intel Panther Point High Defnition Audio working Requires VoodooHDA 2.7.4 Cross.png Tick.png
Volume Control working Requires /System/Library/Extensions/VoodooHDA.kext/Contents/Info.plist VoodooHDAEnableVolumeChangeFix set to true. Cross.png Tick.png
Mute Button working Requires /System/Library/Extensions/VoodooHDA.kext/Contents/Info.plist VoodooHDAEnableMuteFix set to true. Cross.png Tick.png
LAN Atheros working Requires AtherosL1cEthernet.kext from here: http://www.osx86.net/view/1085-atheros_ar8151.html Cross.png Tick.png
Wifi Not working Cross.png Cross.png
USB Intel Panther Point USB XHCI Host Controller working

Need to modify /S/L/E/IOUSBFamily.kext/Contents/Plugins/AppleUSBXHCI.kext/Contents/Info.plist so that IOPCIClassMatch string matches the USB 3.0 PCI device ID in System Profiler (0x1e31).

Cross.png Tick.png
TrackPad Can move but can't click
Keyboard Working OOB
Card Reader Not working
WebCam Working OOB
Brightness Control Not working
Bluetooth working OOB Cross.png Tick.png

[edit] HP DM4-1160us

Notes Installed with Iatkos ML2 installer .Installer booted with cpus=1 command. Options in installer selected , Fake SMC , Usekernelcache=yes , quietboot=yes graphicsenabler=yes 1366x768 NPCI=0X2000 ENABLE HDMI , NETWORK DRIVERS, usbbusfix=yes , TSCSYNC , ps2keyboard mouse driver , disable intel drivers. Update to 10.8.3 is secure. Only delete before restart the intel graphics kexts and applehda.

Hardware Name Chipset Notes Patches Used Compatible 64bit
Processor Intel Core i5 m450 2.40 Ghz working OOB Tick.png
Chipset
  • Mobile Intel 5 series Express
working OOB Tick.png
Graphics Intel HD Graphics (5700mHD) ID=8086 working with QE/CI Method explained in http://www.insanelymac.com/forum/topic/286092-guide-1st-generation-intel-hd-graphics-qeci/ Tick.png
External Monitor HDMI not Working (mirror only, not extend desktop), VGA port unknown Cross.png
Audio Intel High Definition Audio working Requires VoodooHDA 2.8.2 Tick.png
Volume Control working Requires /System/Library/Extensions/VoodooHDA.kext/Contents/Info.plist VoodooHDAEnableVolumeChangeFix set to true. Tick.png
Mute Button working Requires /System/Library/Extensions/VoodooHDA.kext/Contents/Info.plist VoodooHDAEnableMuteFix set to true. Tick.png
LAN Realtek rtl81xx.kext working OOB Tick.png
Wifi Intel wifi 1000 bgn Not working Cross.png
USB Intel Panther Point USB XHCI Host Controller working Use the darkwake=0, EHCI hard EHCI adquire strings in chameleon and sleepenabler kext from http://www.insanelymac.com/forum/topic/287133-guide-backlight-brightness-for-intel-80860046-1st-gen-hd-gma-5700mhd/ in order to get the Esata/usb combo working. Tick.png
TrackPad working OOB Tick.png
Keyboard Working OOB Tick.png
Card Reader Not working Cross.png
WebCam Working OOB Tick.png
Brightness Control Working partially. In preference panels , section screens , it appears the brightness slider. Follow the guide explained in http://www.insanelymac.com/forum/topic/287133-guide-backlight-brightness-for-intel-80860046-1st-gen-hd-gma-5700mhd/ Tick.png
Bluetooth working OOB Tick.png

[edit] Compaq NC6320

  • Install Method: my hack 3.1.2 with OSX Mountain Lion 10.8 from AppStore (ran combo 10.8.2 upgrade when installed)
  • Boot loader: Chameleon v2.2svn r2181
  • Firewire: Work OOB
  • Battery: Work (VoodooBattery)
  • Sleep: Work OOB
  • iCloud, FaceTime, AppStore: Work (after Onboard ethernet enabled with kext see above)
  • iMessage: Works
  • FingerPrint Reader: Recognized, Not Tested Yet
  • Wireless: Works with TP Link WN725N (£9.99)
Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Processor
  • Intel Centrino duo @ 1,8 ghz
working
  • OOB
Tick.png Tick.png
Chipset
  • Mobile Intel 945GM Express
working
  • OOB
Tick.png Tick.png
Graphics Card Tick.png Tick.png
VGA
  • Intel 950 GMA
working
  • with GraphicsEnabler=Yes
Tick.png Tick.png
Audio working
  • with VoodooHDA_2.7.3.kext
Tick.png Tick.png
LAN working
  • using modified kext for 14E4-1692
Tick.png Tick.png
Wifi Not working
  • no kext available (using USB Dongle WiFi)
Cross.png Cross.png
USB working
  • OOB
Tick.png Tick.png
TrackPad working
  • with kext
  • 2-finger scroll working
Tick.png Tick.png
Keyboard working
  • OOB
  • Keyboard Backlight, Volume Knob, BT button+Blue Light, Brightness with Fn key but no onscreen status
Tick.png Tick.png
Card Reader Not working
  • Not yet
Cross.png Cross.png
WebCam working
  • OOB
Tick.png Tick.png
Bluetoth working
  • OOB
Tick.png Tick.png


[edit] Compaq 610

  • Install Method and the install image is from HERE and Boot With "GraphicsEnabler=N0 -f -v and -x (if getting still waiting for root device)".
  • Post Installation - install Fakesmc.kext, Chameleon Wizard, Latest Chameleon boot loader to OSX, and Create Extra Folder in the install partition and Copy the files Here to the folder and make it custom to your need.
  • Create an DSDT and place it in install partition>Extra folder. For Making an DSDT follow this Guide Here.. Dont forget to list the DSDT and SMbios.plist in the Chameleon Wizard.

SMBios = MacBook4,1

BootLoader = Chameleon V2.1 svn r2069

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
CPU Intel Core 2 Duo CPU T5870 @ 2.00GHz Working Native Support With Chameleon Cross.png Tick.png
Video Card ATI Mobility Radeon HD 4300 Series Works with Chameleon latest version and GraphicsEnabler=No Follow The Guide "here" to edit the kext 10.8.2, Additionally u will need ATY_Init.kext Here. Cross.png Tick.png
Chipset ICH8-M Working Native Support Cross.png Tick.png
Audio ICH8 Family HD AUDIO CONTROLLER DEV ID : 284b VENDOR ID : 8086 Working With a Modified kext. Used VoodoHDA.kext (2.7.4), <string>0x04030000&0xffff0000</string> after this line enter the text below.

<key>IOPCIPrimaryMatch</key> <string>0x284b8086</string> save as it is and install it with Kext Utility.

Cross.png Tick.png
Wi-Fi Realtek RTL8191SEvA Not Working Never Supported By MAC OSx Cross.png Cross.png
Ethernet Marvell Yukon 88E8042 PCI-E Fast Ethernet Controller Used the kext "AppleYukon2.kext" in IONetworkingFamily.kext form the native 10.8.2 Edit the info.plist in the AppleYukon2.kext, go for <key>Yukon-88E804Z</key> replace the "Z" with "2" at all instance and put your DEV and VEN ID in <string>0x435A11ab</string>. now install the kext. Cross.png Tick.png
PS2 PS2 Keyboards and Trackpad Working With VoodooPS2 PS2.pkg from iATKOS_L2 i.e VoodooPS2. Cross.png Tick.png
Sleep and Reboot Had Issues With Reboot Used EvOreboot.kext EvOreboot.kext From iATKOS_L2 Cross.png Tick.png
Bluetooth Bluetooth Working Native Support Tick.png Tick.png

[edit] HP Pavilion DV6-1199ee

  • Install Method: I used Niresh [3] on same laptop HD on another partition using step 1 in this guide [4]. Just during installation and when customizing the installation in step 5, choose RealtekRTL81xx for Ethernet to be able to connect to Internet through Ethernet after installation completes.
  • Boot loader: Niresh by default installs its bootloader which depends on Chameleon, during installation you will need the following parameters need "hp UsbBusFix=Yes -v" after installation no need for any parameters.
  • Battery: Not tested
  • Sleep: Not tested
  • iCloud, FaceTime, AppStore: Not tested
  • iMessage: Not tested
  • Wireless: Don't work, has been reported in several sites that it is not working.
Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Processor 2.66 GHz Intel Core 2 Duo Processor T9550 Working OOB Cross.png Tick.png
Graphics Card ATI Mobility Radeon HD 4650 Working Download kext from [5] and then install all kext files from download using Kext wizard Cross.png Tick.png
Audio IDT high definition audio codec Working Using Multibeast 5.4.3 [6], install VoodooHDA 2.7.3, and enable it from system preferences, then sound. Cross.png Tick.png
LAN Realtek Working Using Multibeast 5.4.3 [7], install RealtekRTL81xx (Remember to make this during installation) Cross.png Tick.png
Wifi Intel(R) WiFi Link 5100 AGN , Intel PRO/Wireless Adapters Not working I didn't resolving it, but reported in multiple forums that it is not supported Cross.png Cross.png
USB Working OOB Cross.png Tick.png
TrackPad Synaptic Not tested NA Cross.png Cross.png
Keyboard Working OOB Cross.png Tick.png
Card Reader Not tested Cross.png Cross.png
WebCam HP Webcam Not tested NA Cross.png Cross.png
Bluetoth Not tested NA Cross.png Cross.png

[edit] HP 3163ef

  • Install Method: my hack 3.1.2 with OSX Mountain Lion 10.8 Golden master then install combo update 10.8.2
  • Boot loader: Chameleon v2.2svn r2181, need cpus=1 bootflag
  • Battery: Work
  • Sleep: Don't Work
  • iCloud, FaceTime, AppStore: Work
  • iMessage: Works
  • Wireless: Dont work but usb tethering work
Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Processor
  • Intel Core i5 @ 2.26 ghz
Working
  • OOB
Tick.png Tick.png
Chipset
  • Intel 430M
Working
  • OOB
Tick.png Tick.png
Graphics Card Nvidia GT 320M Working
  • OOB
Tick.png Tick.png
VGA
  • Intel
Working
  • OOB
Tick.png Tick.png
Audio Intel High Definit Audio Working
  • With VoodooHDA_2.8.2.kext
Tick.png Tick.png
LAN Realtek Working
  • OOB
Tick.png Tick.png
Wifi Broadcom BCM43225 Not working
  • No kext available (using USB tethering)
Cross.png Cross.png
USB Working
  • OOB
Tick.png Tick.png
TrackPad Synaptic Working
  • With kext voodoo synaptic kext (multibest 5.2.1)
Tick.png Tick.png
Keyboard Working
  • OOB
  • Except light linked
Tick.png Tick.png
Card Reader JMB38x Not tested Cross.png Cross.png
WebCam HP Webcam Working
  • OOB
Tick.png Tick.png
Bluetoth Don't Have Cross.png Cross.png

[edit] Lenovo

[edit] Lenovo Y580

Change HD SSD250Gb VERTEX2 OK

USED LION Nerish 10.8.2 Change Bios: no virtualizacion, no nv gtx660 only intel

FIXME: Some parts under testing...

Testeado sombre mi propio equipo These information tested me a real hardware

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Processor Intel Core i5-3210M 2.5Ghz Working Native support Cross.png Tick.png
Video Card Intel HD4000 Working Native support Cross.png Tick.png
Video Card Nvidia GTX660M no Working Cross.png Cross.png
Chipset Ivy Bridge Working Native support Cross.png Tick.png
Audio no Working I need test Cross.png Tick.png
WiFi Intel Centrino Wireless N2200BGN no Working Cross.png Cross.png
Ethernet Atheros L1 Working Cross.png Tick.png
Touchpad and keyboard Synaptics touchpad Working (with 2-finger scroll) Cross.png Tick.png
Brightness control Working, (Fn+Left / Fn+Right don't work), Need to change via System Preferences > Display Native support Cross.png Tick.png
Sleep Working Cross.png Tick.png
Battery Working Cross.png Tick.png
Card Reader Working Cross.png Tick.png
Integrated Camera Working OOB Native support Cross.png Tick.png

[edit] Lenovo G570

FIXME: Some parts under testing...

Pack Kexts and DSDT/SSDT [8]

These information and linked kext is based on same model infos in HCL 10.8.0 but tested again a real hardware

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Processor Intel Core i3 2310M 2.1Ghz Working Native support Cross.png Tick.png
Video Card Intel HD3000 Working (but without VGA out) Native support (SMBIOS for MacbookPro8,1 inside Extra folder). Cross.png Tick.png
Chipset Sandy Bridge Working Native support Cross.png Tick.png
Audio Working Patched AppleHDA and DSDT Cross.png Tick.png
WiFi Atheros 9285 Working Cross.png Tick.png
Ethernet Atheros L1 Working Using kext Cross.png Tick.png
Touchpad and keyboard Synaptics touchpad Working (with 2-finger scroll) Using kext Cross.png Tick.png
Brightness control Working, but with Fn+Ins / Fn+Home (not with default Fn+Left / Fn+Right) Native support Cross.png Tick.png
Sleep Working With SleepEnabler.kext Cross.png Tick.png
Battery SONY Working, but display is stuck around 50% (unknown reason) Using kext Cross.png Tick.png
Card Reader Not working (I tried kext in a linked package, but still undetected) Cross.png Cross.png
Integrated Camera Working Native support Cross.png Tick.png

[edit] U400

  • Install Method: USB method and AppStore ML 10.8. Updated to 10.8.1 and then to 10.8.2 without problem (both OTA, not combo updates)
  • Bootloader: Chameleon/Chimera working with following method: Completely re-formatted hdd to MBR, 4 primary partitions (2x Win7, 1x Linux Mint 13, 1x OS X hpf+). Used backup one-key DVD's to restore Win7, including Win7's bootloader. Installed Linux Mint 13 which installed grub2 in place of Win7 bootloader, Win7 appears in grub OS list and boots. Used diskutil only to format last partition to hpf+, used Super-Duper backup to restore OS X to this partition - Chameleon/Chimera does not install. Boot to Linux and added grub entry to chainload Chameleon, got boot0 error, searched web and using usb stick for terminal this time, copied (dd if= of=) boot1h to OS X partition, now boots grub2 -> Chimera 1.11 -> OSX. Think the problem is in the new hdd block sizes. I did not necessarily want to triple-boot, but found that if you disable wifi in BIOS, it will disable the card in Linux (wi-fi and bluetooth) and OSX (bluetooth only, since wifi not working anyway), and there is no way to turn it back on without Win7.
  • Kernel: Default
Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Processor
  • Intel Core i5 2450M 2.50GHz (Sandy Bridge)
working Out the Box Cross.png Tick.png
SATA SATA AHCI 500 GB working Out the Box, SSD support unknown.
  • upgrade to seagate momentus xt 750GB hybrid drive works with no problem and is noticable improvement over stock drive
Cross.png Tick.png
Graphics Intel HD Graphics 3000 working no support for switchable, Intel GPU w/HDMI works.
  • reports 384MB in profiler. Using PCIRootUID=-1 can sometimes get the AMD card to be recognized by name/model in profiler, still no way to switch
Cross.png Tick.png
Audio Intel HD Audio working VoodooHDA 0.2.72 and later caused boot-time random KP's so used VoodooHDA loader app to start the kext after login Cross.png Tick.png
Wireless Intel Centrino Wireless-N 1030 Not working No support due to firmware issue
  • Bluetooth on this card does work and was able to connect to BT speakers w/o issue. Get KP sometimes which I think was related to BT prefpane that wants to auto-connect to keyboard and/or mouse. Bluetooth seems to take up to a minute to initialize (BT icon goes from "broken" symbol to full BT symbol during desktop start-up). Disabled both those (in prefpane-> bluetooth->advanced and uncheck both options), seems to be more stable now.
Cross.png Cross.png
USB 2x USB 2.0, 1xUSB 3.0 Partial Installed drivers (Renasas?) for USB 3.0 does not recognize my USB 3.0 HDD, but does USB 2.0 HDD and flash drives Cross.png Tick.png
Ethernet Realtek GigE working Out the box Cross.png Tick.png
Battery Integrated Not working No support as of yet. Voodoo Battery kext works to show time, on/off A/C indication, but battery is not correctly recognized in profiler Cross.png Tick.png
Trackpad PS/2 TouchPad Partial Multitouch using multi-touch kext for synaptics found on OSx86 site provides 2-finger scroll, 1-finger tap/click, and 2-finger right-click Cross.png Tick.png
Keyboard Integrated PS/2 keyboard working Out the box Cross.png Tick.png
Web Camera 720p unknown working Out the box ...however, in my model I find image from webcam very dark even in brightly-lit room. In linux and win7, webcam brightness seems normal Cross.png Tick.png

[edit] Medion

[edit] Model

Hardware Name Chipset Notes Patches Used Compatible 64bit

[edit] MSI

[edit] Model

Hardware Name Chipset Notes Patches Used Compatible 64bit

[edit] Samsung

[edit] R580 (NP-R580-JS06NL)

Installed using App Store App (building USB thumb drive with the Mac App Store purchase). Will add custom kexts soon.

NOTE: Sleep doesn't work yet as well as the Marvell Yukon 88E8059 Ethernet card, looking for workaround. Sleep still doesn't work with sleepenabler.kext, tried different sleep kexts.

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Processor Intel Core i5 430M 2.27Ghz Working Native support Cross.png Tick.png
SpeedStep Intel Core i5 430M 2.27Ghz. Working. Patched DSDT and removed NullCPUPowerManagement.kext. Cross.png Tick.png
Video Card nVidia GeForce 330M Working with QE/CI. Also VGA out works, have not tested HDMI yet. Native support (SMBIOS for MacbookPro8,1 inside Extra folder). Cross.png Tick.png
Chipset Intel HM55. Working. Native support. Cross.png Tick.png
Audio Realtek HD Audio Working. Patched VoodooHDA for internal speakers and mic. Cross.png Tick.png
WiFi Atheros AR9285 Working (WEP, WPA(2) and Enterprise working confirmed. Patched IO80211Family kext, injected device ID. Cross.png Tick.png
Ethernet Marvell Yukon 88E8059 Not working. Tried device ID injection. Still no kext available to find. Cross.png Cross.png
Touchpad and keyboard Synaptics touchpad Working (with 2-finger scroll, bottom and right 1-finger scroll also work). Using kext, VoodooPS2. Removed ApplePS2 Cross.png Tick.png
Brightness control Working with original keys (FN + up/down-arrows). Patched DSDT with ID in chameleon boot list. Cross.png Tick.png
Sleep Not working. Goes in a coma and, sort of, wakes and won't continue. Still no fix found. Cross.png Cross.png
Battery Samsung Li-Ion 4400mAh. Working, display gets as bright as when power plug used. Brightness control works here also with original FN + up/down-arrow keys. No patches needed, native support. Cross.png Tick.png
Card Reader Working. Native support Cross.png Tick.png
Integrated Camera Working. Native support Cross.png Tick.png


[edit] NP550P5C

Installed as per guide I have written here (Where's the link to guide ????? Deleted for tonymac link (pls read this))

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Processor Intel Core i7 3610QM 2.29Ghz Working Native support Cross.png Tick.png
SpeedStep Intel Core i7 3610QM 2.29Ghz Working. Patched DSDT and removed NullCPUPowerManagement.kext. Cross.png Tick.png
Video Card Intel HD4000 Working with QE/CI. No VGA out but HDMI works. Native support (SMBIOS for MacbookPro8,1 inside Extra folder). Cross.png Tick.png
Chipset Intel HM76. Working. Native support. Cross.png Tick.png
Audio Realtek HD Audio ALC269 Working. Patched AppleHDA for internal speakers and mic. Also patched kext for HDMI Audio. Cross.png Tick.png
WiFi Atheros AR9285 Working. Patched DSDT. Cross.png Tick.png
Ethernet Realtek RTL8111/8168B Working Working with Realtek 10.7 driver from Realtek website Cross.png Tick.png
USB 2 x USB 2.0 & 2 x USB 3.0 Few issues with USB. USB 3.o only works from boot. Cross.png Tick.png
Touchpad and keyboard Synaptics touchpad Working (with 2-finger scroll, bottom and right 1-finger scroll also work). Cross.png Tick.png
Brightness control Working with original keys (FN + up/down-arrows). Cross.png Tick.png
Sleep Working. Takes multiple pushes of PB to wake. Cross.png Tick.png
Battery Samsung Li-Ion Working. No patches needed, native support. Cross.png Tick.png
Card Reader Not Working. Cross.png Cross.png
Integrated Camera Working. Native support Cross.png Tick.png

[edit] RC730

Installed using iatkos mountain lion. You can find information and download here. I used a usb-install (here is a youtube guide to do that)

NOTE: I used the default kext in the installation, but I ticked this settings to: "disable nvidia kexts", "hd3000 kext", "voodoobattery", "mac model 8.1"

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Processor Intel Core i7-2630QM 2 GHz Working like a charm Native support Cross.png Tick.png
SpeedStep Intel Core i7-2630QM 2 GHz Working. No kext/dsdt needed Cross.png Tick.png
Video Card nVidia GeForce gt540m and hd3000 only hd3000 works ( we disabled the graphic card). Trust me, I wasted a lot of time trying all the settings/bootflags/kext to get the graphic card working, with no result. What does work is the hd3000. You get only a signal of the hdmi. So you need a external hdmi screen. The internal laptop screen doesn't work for me. The resolution of the external screens (via hdmi) goes up to 1080p. No kext/dsdt needed Cross.png Tick.png
Chipset Intel HM65 Working. Native support. Cross.png Tick.png
Audio Realtek HD Audio Working. no special kext/dsdt needed Cross.png Tick.png
WiFi Intel Centrino Wireless-N 100 (bgn) Not tested *not tested myself, but I am sure you can find a kext for it. Cross.png Tick.png
Ethernet Realtek PCIe GBE Family Controller (10/100/1000MBit) not tested I am sure you can find a kext for it Cross.png Tick.png
Touchpad and keyboard Synaptics touchpad touchpad not working, keyboard works. Cross.png Tick.png
Brightness control Working with original keys (FN + up/down-arrows). Patched DSDT with ID in chameleon boot list. Cross.png Tick.png
Sleep Not tested Cross.png Cross.png
Battery Samsung Li-Ion 4400mAh. Working No patches needed, native support. Cross.png Tick.png
Card Reader not tested Cross.png Tick.png
Integrated Camera Working. Native support Cross.png Tick.png

[edit] Sony VAIO

[edit] VAIO VPCEH38FN

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Processor Intel® Core™ i5-2450M Processor 2.50 GHz with Turbo Boost up to 3.10 GHz Working Native support Tick.png Tick.png
Video Card NVIDIA® GeForce® 410M GPU Working Native support Tick.png Tick.png
Chipset Intel® HM65 Express Chipset Working. Native support. Tick.png Tick.png
Audio Intel® High Definition Audio Working. Patched VoodooHDA for internal speakers and mic. Tick.png Tick.png
WiFi INTEL IEEE 802.11b/g/n*6 Working. Native support Tick.png Tick.png
Ethernet Network (RJ-45)Connector Working Native Tick.png Tick.png
Touchpad and keyboard Synaptics touchpad Working (with 2-finger scroll, bottom and right 1-finger scroll also work). Native Support Tick.png Tick.png
Battery VGP-BPS26*13 Working, No brightness control and bright at highlevel No patches needed, native support, use 3rd party app for brightness control. Tick.png Tick.png
Bluetooth Bluetooth® standard Ver. 3.0 + HS Not Working No Support Cross.png Cross.png

[edit] Toshiba

[edit] Satellite 670-15W

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Processor Intel Core i5 2430M 2.40Ghz Working Native support Tick.png Tick.png
Video Card nVidia GeForce 520M Working Native support Tick.png Tick.png
Chipset Intel HM55. Working. Native support. Tick.png Tick.png
Audio Realtek HD Audio Working. Patched VoodooHDA for internal speakers and mic. Tick.png Tick.png
WiFi Realtek RTL8188CE Not Working. No support Cross.png Cross.png
Ethernet ? Working Native Tick.png Tick.png
Touchpad and keyboard Synaptics touchpad Working (with 2-finger scroll, bottom and right 1-finger scroll also work). Using kext, VoodooPS2. Removed ApplePS2 Tick.png Tick.png
Battery ? Working, display gets as bright as when power plug used. No patches needed, native support. Tick.png Tick.png

[edit] Satellite L750-212

When you install iAtkos ML2 do not forget to have "Graphic Enabler=No" and "Kernel Cach= NO". Do not choose only this options : Bootloader : Option : Built in Ethernet Patchs : Choose only : Fake SMC, Disabler, EvOreboot, Patch RTC. Drivers : Choose only : Sata/IDE : AHCI and PS2. All others drivers in the table will be find using google search.

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Processor Intel Core i3 2350M 2.29Ghz Working Native support Tick.png Tick.png
Video Card nVidia GeForce 520M Working Native support Tick.png Tick.png
Audio Conexant Working. Patched VoodooHDA 2.7.3 Tick.png Tick.png
WiFi Atheros 9285 Working. Native support Tick.png Tick.png
Ethernet Atheros LAN Working Native support Tick.png Tick.png
Touchpad and keyboard Synaptics touchpad Working Patched VoodooPS2 Tick.png Tick.png
Battery ? Working Patched with kext "Battery lion" et Kexts Wizards Tick.png Tick.png
SD Card Reader ? Working Native support Tick.png Tick.png
USB 3.0 ? Working Patched USB 3.0 Tick.png Tick.png

This page was last modified on 6 February 2014, at 08:24.
This page has been accessed 245,174 times.
Powered by MediaWiki © 2013 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers