HCL 10.10.0

From OSx86
Revision as of 14:12, 6 November 2014 by 84.30.226.101 (Talk)

Jump to: navigation, search
OS X 10.10.0
Hardware Compatibility

This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for 10.10.0 builds only.

For how to edit the Wiki, please see this thread. Thank you!

You're looking for an Installation guide? see here

Note: For suggestions about table headings, please join the discussion here.
Note: Keep in mind that OSx86/InsanelyMac does NOT and will NOT support any tools from Tonymacx86 such as MultiBeast or any other -Beast utilities, as per this thread: http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/ Any mention of Multibeast, Kextbeast or any other Beast tools will be removed at our discretion.

Contents

Motherboards

Abit

Hardware Name Chipset Notes Patches Used Compatible 64bit

Alienware

Hardware Name Chipset Notes Patches Used Compatible 64bit

Asrock

Hardware Name Chipset Notes Patches Used Compatible 64bit
Z77 Pro-4 Intel Z77 System Configuration:
  • CPU: Intel Core i5 3550 Ivy bridge with oc @ 4100 Mhz (3300 mhz stock freq.)
  • RAM: 1x4GB Kingston 1333 MHz overklocked @ 1800 mhz
  • VGA: ASUS GeForce® 210 EN210 SILENT/DI/1GD3/V2(LP)
  • ETH: 1x Realtek RTL8111E gigabit lan
  • WIFI: Icidu 150N pci-e card, with atheros ar9285 chip
  • SND: Onboard ALC892

System Status:

  • All of the above components: Tick.png
  • Reboot, Shutdown: Tick.png
  • Sleep: Works: Tick.png
Installation method: Pendrive with Yosemite downloaded from App Store and made bootable with a tool i'm not allowed to mention.
  • Boot flags: ncpi=0x3000 GraphicsEnabler=Yes
  • VT-d disabled, Sata on AHCI mode
  • Graphics - Worked OOB Tick.png
  • Network - Worked OOB Tick.png
  • WIFI - Works when using this kext Tick.png
  • USB - Worked OOB Tick.png
  • USB 3.0 - Worked OOB Tick.png
  • SATA - Worked OOB Tick.png
  • App Store - Worked OOB Tick.png
  • Sound - Works when using VoodooHDA kext Tick.png
  • Kernel - Vanilla Mach_kernel Tick.png
Tick.png
G41M-VS3 R2.0 G41,ICH7 System Configuration:
  • CPU: Intel Quad Core 8300
  • GPU: Asus GeForce 210 1024 MB
  • RAM: 8GB DDR3

Components Status: Shutdown, restart, Mac App Store sleep/wakeup not sure yet because I just left it idle for 30 minutes where setting for computer to sleep is 10 minutes, when I touch the keyboard it just run normal, but still not sure when I write this. Asus GeForce 210 1024 MB Works OOB

Install method:

  • Compiled installer with Macpwn by Niresh.
  • I made 2 GUID partitions on HDD on MacMini, 1 for installer (compilled with Macpawn) and 1 for Yosemite install kexts (audio & ethernet) with kextutility

Kexts used:

  • VoodooHDA Audio
  • AtherosL1cEthernet.kext for LAN downloaded from the link on idurdu.blogspot.com
Tick.png
Z75-Pro3 Intel-Z75 System Configuration:
  • CPU: Intel i5 3330;
  • GPU: Asus GeForce GTX 660 2047MB;
  • RAM: 16GB DDR3 Crucial Ballistix 1600 CL9;
  • HDD: Samsung SSD 840 EVO 250GB;

Components Status:

  • SpeedStep (16,23,26,30) works via custom SSDT "-xcpm"
  • Audio ALC892 works via DSDT + Patched AppleHDA;
  • USB 3.0 works via DSDT;
  • Sleep/wakeup 100%;
  • Asus GeForce GTX 660 2047MB works OOB without injection.
Install method:
  • Retail + Clover v2k;
  • SmBios iMac 13,2.

Kexts used:

  • FakeSMC.kext + HWSensors
  • RTL8111.kext
  • EvoReboot.kext (not necessarily)
  • AppleHDA.kext (patched)

Archive with DSDT, SSDT, Config.plist and AppleHDA.kext: Z75-Pro3

Tick.png

Asus

Hardware Name Chipset Notes Patches Used Compatible 64bit
B85-PLUS Intel B85 Specifications:
  • CPU: Intel Core i5-4670K 3.4 GHz
  • GPU: ASUS GeForce GTX 560 Ti 1Gb GDDR5
  • RAM: 4 x 2Gb 1600MHz DDR3
  • HDD: SAMSUNG SP2504C 250Gb SATA II
  • PSW: 660 W
  • Display: 1920x1080

BIOS Settings:

  • SecureBoot: OtherOS

System Status:

  • Graphics: Tick.png
  • Audio: Tick.png
  • Ethernet: Tick.png
  • USB 3.0: Tick.png
  • Sleep/Shutdown/Reboot/Wake: Tick.png

External kexts used:

  • FakeSMC
  • AppleHDA/audio_realtekALC-100.command
  • RealtekRTL8111

Bootloader (Clover v2k r2988):

  • boot/kext-dev-mode=1
  • devices/audio/Inject=2
  • graphics/InjectNVidia=yes

Others:

  • System definitions: iMac14,2
Tick.png
P5KPL-AM/PS Intel G31 Specifications:
  • CPU: Intel Pentium Dual-Core E5400 2.70 GHz
  • GPU: Inno3d GeForce 9500GT 1GB DDR2
  • RAM: 2x2 Dual-channel interleaved Kingston 800 MHz DDR2 RAM
  • HDD: WD Cavier Blue SATA II 500GB
  • PSW: 500 W
  • Display: 1600x900 + 1024x768 (Dual-monitor)

BIOS Settings:

  • ACPI 2.0 enabled
  • Legacy USB support enabled
  • Suspend mode: S3 only

System Status:

  • Graphics: Tick.png
  • Audio: Tick.png
  • Ethernet: Tick.png
  • PS/2: Tick.png
  • Sleep/Shutdown/Reboot/Wake: Tick.png

External kexts used:

  • FakeSMC
  • NullCPUPowerManagement
  • VoodooHDA
  • VoodooPS2Controller
  • EvOreboot
  • RealtekRTL81xx

Bootloader (Clover v2k r2953):

  • Inject graphics for Intel, NVIDIA
  • NVRAM fix (+ RC script fix)
  • USB fix

Others:

  • System definitions: iMac11,1
  • Removing unnecessary kexts with "kextcache --(system-)prelinked-kernel" and "kextcache --system-caches" commands applied after.
Tick.png
P8Z77V-Deluxe Intel Z77 Specifications:
  • CPU: Intel Core i7 2600k @ 4.6 GHz
  • GPU: Asus GTX670 DirectCUII Top Edition @ Uefi Bios
  • RAM: 4x4 GSKILL RIPJAW X 1600Mhz XMP DDR3 RAM
  • HDD: Seagate 750GB SATA 2.0
  • PSW: 750W Tacens
  • Display: Dell Ultrasharp U2312HM 1920x1080

BIOS Settings:

  • CSM Disabled. Fully UEFI bios.
  • HPET 64 bits.
  • Intel HD Graphics enabled.

System Status:

  • Graphics: Tick.png
  • Audio: Tick.png
  • Ethernet: Tick.png
  • USB: Tick.png
  • Shutdown/Reboot: Tick.png

External kexts used:

  • FakeSMC
  • NullCPUPowerManagement
  • VoodooHDA 2.7.3 // Audio RealtekALC-100.command
  • AppleIntel1000e 3.1.0
  • RealtekRTL81xx

Bootloader (Clover v2k r2953) Configurator:

  • Graphics: Select your inject preset. If you have Nvidia 600/700 series, disable all, even Nvidia one.
  • IMPORTANT: Move FakeSMC, NullCPUPowerManagement, Realtek and Intel kexts to \EFI\CLOVER\Kexts\10.10\ folder.
  • ACPI Fixes: FixUSB, AddDTGP, FixHDA, FixSATA, FixLAN, FixShutdown & FixIPIC. Remove SSDT options. Check SuspendOverride & HaltEnabler

Others:

  • System definitions: iMac11,3 (you can select 13,2, but AppStore will tell you to update thunderbolt firmware)
  • Add args: -v dart=0 Darkwake=0 Kext-dev-mode=1 slide=0. Check NeverHibernate.
  • On Devices: Audio Detect.
  • Kernel Patches: AppleRTC & Asus AICPUPM
  • System Parameters: Inject Kexts YES & Check Inject System ID
Tick.png

Biostar

Hardware Name Chipset Notes Patches Used Compatible 64bit

EVGA

Hardware Name Chipset Notes Patches Used Compatible 64bit

Foxconn

Hardware Name Chipset Notes Patches Used Compatible 64bit
G31MXP Intel Chipset ICH7 System Configuration:
  • CPU: Intel Core2Quad @2.66GHz
  • GPU: nVidia GeForce GT220 1024 MB
  • RAM: 2GBx2 1066 MHz DDR2 SDRAM

Component Status:

  • Shutdown Tick.png
  • Restart Tick.png
  • Sleep: Haven't tested yet
  • USB 2.0 Tick.png
  • Ethernet: Realtek RTL8111/8168 Tick.png
  • Audio: ALC662 Tick.png

Installation Method:

  • OS X Yosemite Chameleon USB install link
  • Bootloader: OS X Yosemite Chameleon r2430 with DSDT.aml link
  • Audio ALC662 works using kexts: HDAEnabler.kext, ALC662.kext and AppleHDA.kext for Yosemite.
  • Audio ALC662 works if you modify your org.chameleon.Boot.plist: remove <key>npci=0x2000</key> <string>Yes</string> and you must write this <key>Kernel Flags</key> <string>kext-dev-mode=1</string>
  • Install with Kext Wizard: NullCPUPowerManagement.kext, EvOreboot.kext (for shutdown), RealtekR1000SL.kext (for Ethernet: Realtek RTL8111/8168)
  • Intallation Method in Greek Language: link
Tick.png

Gigabyte

Hardware Name Chipset Notes Patches Used Compatible 64bit
GA-P35-DS3R v1.0 Intel P35 Chipset System Configuration:
  • CPU: Intel Xeon 771 E5450 3.0 Ghz
  • GPU: NVIDIA GeForce GTX 660 2048 MB
  • RAM: 2GBx4

Component Status:

  • Shutdown Tick.png
  • Restart Tick.png
  • Sleep Tick.png
  • USB 2.0 Tick.png
  • Ethernet Tick.png : PCIe Card Marvell Yukon Gigabit Adapter 88E8053
  • GPU: GTX 660 DVI Tick.png , Dual Display
  • Audio: external USB Sound Card Tick.png

Installation Method:

  • OS X Yosemite Chameleon USB install link
  • Bootloader: Chameleon 2.2svn rev2403 with DSDT.aml
Tick.png
GA-P55m-UD2 v1.0 Intel P55 Chipset System Configuration:
  • BIOS: F11
  • CPU: Intel Core i5 @ 3.29 GHz
  • GPU: Nvidia GeForce GTS 250 1024 MB
  • RAM: Kingston HyperX 16 GB (4x4GB) DDR3 1333 MHz
  • Keyboard: Apple Keyboard, USB

Component Status:

  • Shutdown Tick.png
  • Restart Tick.png
  • Sleep Cross.png (maybe solution on net)
  • USB 2.0 Tick.png
  • Ethernet Tick.png RTL8111D
  • GPU: GTS 250 Tick.png , Dual Display
  • Audio: Tick.png Realtek ALC888b

Installation Method:

Tick.png
GA-P43-ES3G Intel P43 System Configuration:
  • BIOS: F14
  • CPU: Intel Core 2 Quad 9300 @ 3 GHz
  • GPU: Gainward GTX 470 1280 MB
  • RAM: 2x2GB GEIL DDR2 800 MHz RAM

Component Status:

  • Shutdown Tick.png
  • Restart Tick.png
  • Sleep Cross.png (maybe solution on net)
  • USB 2.0 Tick.png
  • Ethernet Tick.png RTL8111C
  • GPU: GTX 470 Tick.png
  • Audio: Tick.png Realtek ALC888

Installation Method:

  • Create Boot USB (IMPORTANT: MBR Table or Bios will freeze during POST) with Yosemite from Installation App from App Store. Add Clover EFI Bootloader r2953, without ESP partition and Boot0f option.
  • IMPORTANT: Add to USB and later in POST install, kexts FakeSMC, NullCPUPowerManagement and AppleACPIPlatform to EFI\CLOVER\Kexts\10.10\ folder.
  • Add Args to USB: dart=0 Darkwake=0 Kext-dev-mode=1 -v and Install
  • Once Installed, boot from USB again, Install Clover BUT WITH ESP this time, and every single arg or kext like USB part above.
  • IMPORTANT: If rebooting shows Boot0fa error, reboot from USB once again, open Clover Configurator, and select in BOOT: LegacyBiosDefault. Then reboot to OSX without USB plugged, and then open once again Clover Configurator, and switch back BOOT to PBR. It should do the trick.
Tick.png
GA-X79 UD3 v1.0 Intel X79 Chipset System Configuration:
  • CPU: Intel i7 2011 3820 3.7 Ghz
  • GPU: NVIDIA GeForce GTX 680 4096 MB
  • RAM: 8GBx2

Component Status:

  • Shutdown Tick.png
  • Restart Tick.png
  • Sleep Tick.png
  • USB 2.0 Tick.png
  • Ethernet Tick.png
  • GPU: GTX 680 DVI Tick.png , Dual Display
  • Audio: external USB Sound Card Tick.png

Installation Method:

  • OS X Yosemite Chameleon USB install link
  • Bootloader: Chameleon 2.2svn rev2403, first boot add -v cpus=1 npci=0x2000 pos installation add ncpi=0x2000 chameleon.boot.plist
Tick.png
Z68AP-D3 uefi BIOS Intel® Z68 Express System Configuration
  • CPU: Intel Core-i3
  • RAM: 8GB DDR3 1333 MHz
  • GPU: nVidia GeForce 210 1024 МБ
  • Network: Onboard RTL8111E
  • Audio: Behringer UCA222 USB

Component Status:

  • GPU Tick.png
  • Shutdown Tick.png
  • Restart Tick.png
  • Sleep Tick.png - Wakes up by keyboard hit w\o problem but CPU cooler is working in sleep mode.
  • Ethernet Tick.png
  • Haven't tried built-in sound, using USB sound card
Notes
  • (!) Type "PCIRootUID=0 GraphicsEnabler=YES", otherwise I only could boot if display plugged to built-in HDMI during BIOS messages and POST, and replug display to Nvidia PCI when system has booted.
  • Sound and Ethernet works during Installation
  • User DSDT or DSDT-Free installation (I have no DSDT)
Tick.png
GA-Z87-HD3 Intel Z87 Chipset System Configuration:
  • BIOS: F7
  • CPU: Intel Core i5-4670K @ 4.25 GHz
  • GPU: Nvidia GeForce GTX 660 OC 2048 MB
  • RAM: Crucial Ballistix Sport 16 GB (4x4GB) DDR3 1666 MHz
  • Keyboard: DasKeyboard, USB

Component Status:

  • Shutdown: Tick.png
  • Restart: Tick.png
  • Sleep: Haven't tested yet
  • USB 2.0: Tick.png
  • USB 3.0 :Tick.png (GenericUSBXHCI.kext)
  • Ethernet: Tick.png, using RealtekRTL81xx.kext
  • GPU: GTX 660 Tick.png, Triple Display (DP, HDMI, DVI w/VGA adapter)
  • Onboard Graphics: Not tested yet
  • Audio: Cross.png Realtek ALC892 (can't get it to work)

work for me with http://www.insanelymac.com/forum/files/file/147-applehda-for-realtek-alc892/

Installation Method:

  • Followed instructions here, for the most part
  • Set BIOS to UEFI only
  • Using Clover r2953, UEFI only
  • Boot args: -v GraphicsEnabler=No dart=0 npci=0x3000 kext-dev-mode=1
  • Also disabled C-states and P-states until patched kexts installed
  • Installed kexts as instructed to in the guide
Tick.png

Intel

Hardware Name Chipset Notes Patches Used Compatible 64bit
DG31PR Intel G31 System configuration:
  • Intel Core 2 Duo E7400
  • Intel G31 chipset
  • HDD: Hitachi HDS721010CLA332 (1TB)
  • RAM: 2x 2GB Kingston DDR2 800
  • NVIDIA GeForce GT240 1GB GDDR5 (GraphicsEnabler)
  • Audio ALC888
  • RTL8111GR integrated Gigabit Ethernet
  • D-Link DWA-525 wireless NIC
Installation notes:
  • Yosemite 10.10 retail
  • Used Chris1111's Yosemite USB installer package; setup USBs made using the latter tool won't boot properly unless if the org.chameleon.boot.plist startup flags are set to kext-dev-mode=1 dart=0 USBBusFix=Yes PCIRootUID=0. The same flags should also be used once OS X is installed.
    • Installer should also be patched to work on MBR partitions. May work with GUID but this is untested.
  • For some reason neither Chameleon r2404 or the Enoch r2403 bootloader supplied with Chris' installer won't work if installed on the Yosemite HDD; Chameleon r2401 and r2407 should work using the above boot flags.
  • Audio works using Piker-Alpha's AppleHDA8Series.sh scripted method as suggested in the latter thread. Ermac however, suggested on doing away with the HDAEnabler kext, but the HDAEnabler=yes flag doesn't seem to work.
    • Setting the SMBIOS profile to MacPro3,1 via Chameleon Wizard should help with the audio surge/popping problem when the sound card is left idle.
  • Mieze's RTL8111 kext should work fine without any problems

Working:

  • Shutdown/Reboot/Sleep
  • Graphics acceleration (2D/3D)
  • Most applications including Adobe Premiere, Photoshop and the like
  • Peripherals such as printers e.g. Brother DCP-J105

Known issues:

  • Unfortunately no drivers for the DWA-525 are available as of 2014. A wireless range extender can be used as a makeshift Wi-Fi access point to work around the problem though. :)
Tick.png
DG31PR Intel G31 System configuration:
  • Intel Core 2 Duo E7400
  • Intel G31 chipset
  • RAM: 4GB
  • Gigabyte GeForce 9400 GT 1GB
  • Audio ALC888
  • RTL8111GR integrated Gigabit Ethernet
  • Asus N-10 USB Wifi (official driver)
Installation notes:

Working:

  • Shutdown/Reboot/Sleep
  • Graphics acceleration (2D/3D)
Tick.png

MSI

Hardware Name Chipset Notes Patches Used Compatible 64bit

PCWARE

Hardware Name Chipset Notes Patches Used Compatible 64bit

QUO

Hardware Name Chipset Notes Patches Used Compatible 64bit

Supermicro

Hardware Name Chipset Notes Patches Used Compatible 64bit
X8DTi-F Intel® 5520 (Tylersburg) Chipset System configuration:
  • CPU: Intel Xeon Westmere-EP X5650 6-core 2.67GHz x2
  • GPU: Gainward Nvidia GTX 660 2GB
  • RAM: 24GB - IBM (Micron Technology) 4GB ECC Reg. DDR3 1333MHz x6
  • HDA: No onboard audio - Using ASUS Xonar U7 USB sound card
  • NIC: No drivers for onboard Intel® 82576 Dual-Port GbE - Using Realtek RTL8169 (TP-Link) PCI card
  • HDD: Samsung 840 EVO 500GB
  • IO: PCIe 4-port SATA III card (bootable)
  • IO: Inateck PCIe USB 3.0 card 5-port (rear) + 2-port header (front)
  • IO: Bluetooth 4.0 USB 2.0 dongle (Partlist)

BIOS Settings:

  • Default settings + CPU stepping settings

Installation method:

  • App Store InstallESD.dmg
  • USB Installation - Upgraded from 10.9.4

System Status:

  • Graphics: QE, full 3D acceleration, native resolution, Dell 27" U2711 (DP) monitor detected correctly Tick.png
  • Audio Tick.png - w/ USB audio adapter
  • Ethernet Tick.png w/ addon card
  • USB 2.0 Tick.png
  • USB 3.0 Tick.png w/ add-on card
  • BT 4.0 Tick.png w/ USB dongle
  • Apple Wireless Keyboard, Magic Trackpad, Magic Mouse Tick.png
  • TimeMachine, App Store, iTunes Store Tick.png - w/ Ethernet fix (disable onboard LAN in BIOS)
  • Sleep, Wakeup Cross.png
  • Poweroff Tick.png
Post-installation:
  • 3rd Party SATA
  • EvOreboot
  • FakeSMC
  • NullCpuPowerManagement
  • Network -> AppleRTL8169Ethernet 2.0.6
  • Chimera Bootloader
  • System definitions -> MacPro5,1
Tick.png

Graphics Cards

Please specify if your card is PCI-E or Integrated.
Also, place chip and board manufacturer in their respective column.

PCI-E

AMD/ATI

Model Board-Manufacturer Notes QE/CI Output Dual display Compatible 64bit
Radeon™ HD 4830 Sapphire
  • Using QE_CI Exotic patch
  • Chameleon 2.0 RC5 (or the most recent) or PCEFI 10.6 Lion + Snow or Clover
  • GraphicsEnabler=Yes
Tick.png DVI / DVI Not tested Tick.png
Radeon™ HD 6770 Sapphire
  • Using those methods
  • Chameleon 2.0 RC5 (or the most recent) or PCEFI 10.6 Lion + Snow or Clover
  • GraphicsEnabler => No more need!!!
Tick.png DVI / HDMI / VGA Yes with FB set to Bulrushes Tick.png

NVIDIA

Model Board-Manufacturer Notes QE/CI Output Dual display Compatible 64bit
GTX 570 1280 MB PNY Tick.png 2DVI + DP + HDMI Not Tested Tick.png
GTX 750 2048MB[1] Gigabyte
  • Boot for install chameleon nv_disable=1[2]
  • Download Nvidia Web Driver[3]
  • Download Pacifist and install the new nVidia driver within the package
  • Open up a terminal window and run the following command: sudo nvram boot-args="nvda_drv=1"
  • Restart nv_disable=1, install full Nvidia web driver package, Restart nv_disable=1 enable nvidia driver in nvidia preference pane, Restart
Tick.png Dual-link DVI-Ix1/DVI-Dx1/HDMIx2 Tick.png Tick.png
GTX 660 OC 2048MB Gigabyte
  • Used GraphicsEnabler=No in boot args
  • Downloaded NVIDIA CUDA driver
Tick.png DP, HDMI, DVI w/VGA adapter Tick.png Tick.png
GTX660-DC2-2GD5 ASUS
  • OOB no injection (Clover v2k)
  • CUDA driver
  • Nvidia web drivers
Tick.png DP, HDMI, DVI Tick.png Tick.png

Integrated

INTEL

Model Board-Manufacturer Notes QE/CI Output Dual display Compatible 64bit

Network Cards

Wireless

Interface Standard Device Manufacturer Chipset Notes Compatible 64bit

PCIe x1

a/b/g/n

TP-LINK TL-WDN4800

No 5GHz, product page here

Tick.png

Wired (Ethernet)

Interface Standard Device Manufacturer Notes Compatible 64bit

Sound Cards

Interface Hardware Name Manufacturer Notes Compatible 64bit

Webcams

Interface Item Description Manufacturer Notes Compatible 64bit
USB 2.0 Logitech QuickCam Ultra Vision SE Logitech Worked out-of-box Tick.png
USB 2.0 Microsoft LIFECAM VX 700 Microsoft Works OOB Tick.png

Bluetooth

Interface Item Description Manufacturer Chipset Notes Compatible 64bit

USB 3.0 Cards / Adapters

Type of Accessory Item Description Manufacturer Notes Compatible 64bit

Keyboard & Mouse

Wireless

Interface Item Description Manufacturer Model No Notes Compatible 64bit
Powered by MediaWiki © 2015 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   PHP hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers