HCL 10.11.1

From OSx86
Revision as of 01:13, 30 October 2015 by 162.232.245.16 (Talk)

Jump to: navigation, search
OS X 10.11.1
Hardware Compatibility

This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for 10.11.1 builds only.

For how to edit the Wiki, please see this thread. Thank you!

You're looking for an Installation guide? see here

Note: For suggestions about table headings, please join the discussion here.

Contents

Motherboards

Abit

Hardware Name Chipset Notes Patches Used

Alienware

Hardware Name Chipset Notes Patches Used

Asrock

Hardware Name Chipset Notes Patches Used

Asus

Hardware Name Chipset Notes Patches Used
P8Z77V-LX Intel Z77 Chipset System Configuration:
  • CPU: Core i5-3550 3.3Ghz
  • GPU: XFX AMD Radeon R9 280x R9-280X-TDFD
  • RAM: 4GBx4

Component Status:

  • Shutdown Tick.png
  • Restart Tick.png
  • CPU Turbo Mode Cross.png Recognized by system, but causes hard freezes within a few minutes of boot. Disabled in BIOS.
  • EIST Tick.png
  • Sleep Tick.png
  • USB 2.0 Tick.png
  • USB 3.0 Tick.png
  • Ethernet Tick.png : Realtek RTL 8111E
  • GPU: 2X Displayport, HDMI/DVI Tick.png , Quad Display
  • Audio: Onboard ALC887 Cross.png Onboard audio dead, can't test, USB external used instead
  • Make sure you try different USB ports for your install media if you get waiting for root device at boot--El Capitan has a proclivity for disabling some ports depending on your SMBIOS. I finally had luck by changing the header my front panel USB 2.0 ports were attached to.
  • All USB ports can be fixed later: Minimal modifications to Clover generated DSDT--renamed EHC1 and EHC2 to EH0 and EH02 respectively to fix USB 2.0 ports. Kext patching not needed with this DSDT method -- changing the name in DSDT causes the port restriction to not apply to them.
  • Enable ACPICPUPM patch to obviate need for NullCPUPowerManagement.kext
  • Only kexts needed were FakeSMC.kext and RealTekRTL8111.kext
  • Using MacPro6,1 SMBIOS

Installation - Clean install 10.11.0 -> upgraded via app store to 10.11.1

  • Clover OS X El Capitan
  • Bootloader: Clover using injected kexts in ESP.
  • Asus VBIOS downloaded from TechPowerUp [1], renamed to /EFI/CLOVER/ROMS/1002_6798.rom . Load VBIOS must be ON.

Installation - Upgrade using App Store process I had some initial luck with this, but I later reformatted and did a clean install to be completely sure I was rid of any remnants of having used TonyMacX86 crapware earlier. Make sure you have clover boot from the new install partition on its first restart.

Biostar

Hardware Name Chipset Notes Patches Used

DFI

Hardware Name Chipset Notes Patches Used

EVGA

Hardware Name Chipset Notes Patches Used

Foxconn

Hardware Name Chipset Notes Patches Used

Gigabyte

Hardware Name Chipset Notes Patches Used

Intel

Hardware Name Chipset Notes Patches Used

MSI

Hardware Name Chipset Notes Patches Used
Z97-G45 Gaming Intel Z97 Chipset System Configuration:
  • CPU: Core i7-4790K @ 4 GHz
  • GPU: EVGA GeForce GTX 660 2GB
  • RAM: 2x8GB

Component Status:

  • Shutdown Tick.png
  • Restart Tick.png
  • CPU Turbo Mode Tick.png Recognized by system, but causes hard freezes within a few minutes of boot. Disabled in BIOS.
  • EIST Tick.png
  • Sleep Tick.png
  • USB 2.0 Tick.png
  • USB 3.0 Tick.png
  • Ethernet Tick.png : Killer Gaming E2205
  • GPU: 2X Displayport, HDMI/DVI Tick.png
  • Audio: Onboard ALC1150 Tick.png Works with Voodoo 2.8.8, not tested with regular drivers
  • Using iMac15,1 SMBIOS

Installation - Clean install 10.11.0

  • Clover OS X El Capitan
  • Bootloader: Clover using injected kexts in ESP.

PCWARE

Hardware Name Chipset Notes Patches Used

QUO

Hardware Name Chipset Notes Patches Used

Supermicro

Hardware Name Chipset Notes Patches Used

Graphics Cards

Please specify if your card is PCI-E or Integrated.
Also, place chip and board manufacturer in their respective column.

PCI-E

AMD/ATI

Model Board-Manufacturer Notes QE/CI Output Dual display
Radeon™ HD 4830 Sapphire
  • Using QE_CI Exotic patch
  • Clover
Tick.png DVI / DVI Not tested
Radeon™ HD 6770 Sapphire
  • Using HD6770_QE_CI_Patch
  • Clover
Tick.png DVI / HDMI / VGA Not tested
Radeon™ R9 280x XFX Tick.png Full QE/CI and Metal support DP / HDMI / DVI Tick.png Quad display (2xDP, 1xHDMI, 1xDVI) OK

NVIDIA

Model Board-Manufacturer Notes QE/CI Output Dual display
GTX 570 1280 MB PNY Tick.png 2DVI + DP + HDMI Not tested
GTX 660 2048 MB EVGA Tick.png 2DVI + DP + HDMI Not tested

Integrated

INTEL

Model Board-Manufacturer Notes QE/CI Output Dual display

Network Cards

Wireless

Interface Standard Device Manufacturer Chipset Notes

Wired (Ethernet)

Interface Standard Device Manufacturer Notes

Sound Cards

Interface Hardware Name Manufacturer Notes

Webcams

Interface Hardware Name Manufacturer Notes

Bluetooth

Interface Item Description Manufacturer Chipset Notes

USB 3.0 Cards / Adapters

Type of Accessory Item Description Manufacturer Notes

Keyboard & Mouse

Wired

Interface Item Description Manufacturer Model No Notes

Wireless

Interface Item Description Manufacturer Model No Notes
Powered by MediaWiki © 2015 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   PHP hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers