Editing HCL 10.5.2

Jump to: navigation, search

Warning: You are not logged in.

Your IP address will be recorded in this page's edit history.
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 1: Line 1:
 
{{10.5.2}}
 
{{10.5.2}}
 
 
This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.
 
This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.
  
Line 8: Line 7:
  
 
''' For how to edit the Wiki, please see [http://forum.insanelymac.com/index.php?s=&showtopic=88125&view=findpost&p=627907 this] thread. Thank you! '''
 
''' For how to edit the Wiki, please see [http://forum.insanelymac.com/index.php?s=&showtopic=88125&view=findpost&p=627907 this] thread. Thank you! '''
 
  
 
==Motherboards==
 
==Motherboards==
 
 
 
  
 
=== Abit ===
 
=== Abit ===
 
'''INTEL CPU'''
 
'''INTEL CPU'''
 
{| class="wikitable" width="100%"
 
{| class="wikitable" width="100%"
!Hardware Name (alphabetical)ƒ
+
!Hardware Name
 
!Chipset
 
!Chipset
 
!Notes
 
!Notes
Line 46: Line 41:
 
* VID RESOLUTION: Depends on vid card, see [http://insanelymac.com/forum/index.php?showtopic=155477 here] for hd48xx thread!
 
* VID RESOLUTION: Depends on vid card, see [http://insanelymac.com/forum/index.php?showtopic=155477 here] for hd48xx thread!
 
* Install Instructions:
 
* Install Instructions:
*# Installed via sata dvdrom (IDE not recognised) found [http://www.greensurfshop.com/brands/Matunas.html here]
+
*# Installed via sata dvdrom (IDE not recognised)
 
*# Seperate Sata HDD formatted (fat32) using Installer and installed onto
 
*# Seperate Sata HDD formatted (fat32) using Installer and installed onto
 
*# Vanilla kernel worked fine, don't add or change anything yet at install.
 
*# Vanilla kernel worked fine, don't add or change anything yet at install.
Line 188: Line 183:
 
* BIOS version: 14  
 
* BIOS version: 14  
 
* Installation method: Leo4all v2 (10.5.2) with Vanilla Kernel 9.2.2
 
* Installation method: Leo4all v2 (10.5.2) with Vanilla Kernel 9.2.2
* Audio (ALC 883): 2ch only so far. Works with Azalia patch from [http://forum.insanelymac.com/index.php?showtopic=36520 skippyretard]. Tried the 883 kexts from Leo4all v2 install, latest Taruga's 5.1 kext (April 24th, 2008) and [http://www.greensurfshop.com/categories/Wetsuits/ mens wetsuits] skippyretard's 883 pkg with no luck. Linux reconizes ALC883 OK. Maybe the guy up here with an ALC888 has a different mobo revision.
+
* Audio (ALC 883): 2ch only so far. Works with Azalia patch from [http://forum.insanelymac.com/index.php?showtopic=36520 skippyretard]. Tried the 883 kexts from Leo4all v2 install, latest Taruga's 5.1 kext (April 24th, 2008) and skippyretard's 883 pkg with no luck. Linux reconizes ALC883 OK. Maybe the guy up here with an ALC888 has a different mobo revision.
 
* Video (GMA 950): Works with GMA950 driver from the Leo4all install DVD. QE/CI enabled and no artifacts. Resolution fixed at 1024x768, I changed it editing com.apple.Boot.plist adding <string>"Graphics Mode"="1280x1024@85"</string>. There is some minor mouse blinking when moving over the dock, hardly noticeable.
 
* Video (GMA 950): Works with GMA950 driver from the Leo4all install DVD. QE/CI enabled and no artifacts. Resolution fixed at 1024x768, I changed it editing com.apple.Boot.plist adding <string>"Graphics Mode"="1280x1024@85"</string>. There is some minor mouse blinking when moving over the dock, hardly noticeable.
 
* LAN: Works out of the box
 
* LAN: Works out of the box
Line 283: Line 278:
 
* BIOS setup options: lan bootrom enable; sata->raid->AHCI
 
* BIOS setup options: lan bootrom enable; sata->raid->AHCI
 
* Audio: Works out of the box
 
* Audio: Works out of the box
* LAN: [http://forum.insanelymac.com/index.php?showtopic=106675&pid=878087&mode=threaded&start=#entry878087 works with this] add 0x054C10DE to IOPCIPrimaryMatch (Info.plist), surfing [http://www.greensurfshop.com online surf shop] ok so far, issues with filezilla
+
* LAN: [http://www.insanelymac.com/forum/index.php?showtopic=106675&start=0&p=878087&#entry878087 works with this] add 0x054C10DE to IOPCIPrimaryMatch (Info.plist)
 
* IDE: Full DMA speed with AppleNforceATA.kext and IOATAFamily.kext from Leo4allv4.1 (MCP67)
 
* IDE: Full DMA speed with AppleNforceATA.kext and IOATAFamily.kext from Leo4allv4.1 (MCP67)
 
* SATA: not fully tested yet (enable AHCI under SATA/RAID)
 
* SATA: not fully tested yet (enable AHCI under SATA/RAID)
Line 589: Line 584:
 
*# Delete or move all graphic driver: "cd /SYSTEM/LIBRARY/EXTENSIONS; rm NV*; rm ATI*"
 
*# Delete or move all graphic driver: "cd /SYSTEM/LIBRARY/EXTENSIONS; rm NV*; rm ATI*"
 
*# "touch /var/db/.AppleSetupDone" finally "exit"
 
*# "touch /var/db/.AppleSetupDone" finally "exit"
*# Edit /Library/Preferences/SystemConfiguration/com.apple.Boot.plist for your framebuffer screen resolution: <key>Graphics Mode</key><string>1280x1024x32</string>
+
*# Edit /Library/Preferences/
 +
SystemConfiguration/com.apple.Boot.plist for your framebuffer screen resolution: <key>Graphics Mode</key><string>1280x1024x32</string>
 
* Overall: A cheap, stable and energy efficient AMD board (19W idle with AMD 4850e/1200/0.8V, 2.5HD, PSU). Good undervolting-BIOS: 0.8V
 
* Overall: A cheap, stable and energy efficient AMD board (19W idle with AMD 4850e/1200/0.8V, 2.5HD, PSU). Good undervolting-BIOS: 0.8V
 
|EFI ok
 
|EFI ok
Line 734: Line 730:
 
| Yes
 
| Yes
 
| onboard wifi needs patching
 
| onboard wifi needs patching
 +
|-
 +
|P5Q3
 +
|Intel p45 + ICH10
 +
|
 +
'''Hardware:'''
 +
*Intel core2 Quad Q9550 2,83ghz
 +
*Geforce 9800GT 1024mb (asus build)
 +
*4gigs corsair RAM
 +
 +
'''Install Method:'''
 +
*DSDT patched from winXP install with [http://www.osx86.es/?p=883 DSDTSE(win edition)]
 +
*BIOS settings: config sata as = AHCI, advanced cpu config = all disabled, suspend mode = S3 only, onboard devices = try disable if fail (no juzzi needed)
 +
*Kalyway 10.5.2 - default install options
 +
*Through terminal on installDVD: -Chameleon installed, -DSDT placed on HDD/root, -AppleIntelCPUPowerManagement.kext removed/renamed if present!
 +
*glorious welcome movie!
 +
(remember to try bootflags like ''-v -x -f cpus=1'')
 +
 +
'''OOB:'''
 +
*Ethernet
 +
*USB (also frontpanel)
 +
 +
'''Needs Patching:'''
 +
*Firewire
 +
*Sound
 +
*Video (more resolutions/configurability with PCWiz OSXtool EFIstring injection, but lots of gfx errors)
 +
 +
moving on to SL now.
 +
 +
PS. patch your own dsdt, its easy and fun ;)
 +
|Suspected but not tested.
 +
|No. DSDT applied, and some hardware patched.
 
|-
 
|-
 
|P5QL-PRO
 
|P5QL-PRO
Line 809: Line 836:
 
|USB(memory sticks and cards) issues: only reads if was installed at start up.
 
|USB(memory sticks and cards) issues: only reads if was installed at start up.
 
|-
 
|-
 +
|
 
|P5KC
 
|P5KC
 
|Intel P35 & ICH9
 
|Intel P35 & ICH9
Line 1,309: Line 1,337:
 
* BIOS Version:  1202; Revision: Unknown.
 
* BIOS Version:  1202; Revision: Unknown.
 
* Audio: ADI 1988 HD Audio Device; works with Azalia driver installed from dvd.
 
* Audio: ADI 1988 HD Audio Device; works with Azalia driver installed from dvd.
* LAN: Not tested.
+
* LAN: Work, need nForceLAN_0.62.3.kext(edit ID).
* SATA & IDE: SATA works with Nforce Test driver from dvd; IDE Not tested.
+
* SATA & IDE: SATA works with Nforce Test driver from dvd; IDE work.
 
| EFI Worked.
 
| EFI Worked.
 
| No, audio,sata needs patching,slow boot (aprox. 3-4 minutes) .
 
| No, audio,sata needs patching,slow boot (aprox. 3-4 minutes) .
Line 2,092: Line 2,120:
 
*SATA: No
 
*SATA: No
 
*Install Method: iPC OSX8x 10.5.6 INTEL/AMD SSE2/SSE3 Universal
 
*Install Method: iPC OSX8x 10.5.6 INTEL/AMD SSE2/SSE3 Universal
*No audio for on board (VIA VT17088). Kernel Panic on installer exit, restart, shutdown, Sleep not yet tested. You MUST disable SATA before installing as it will goto "waiting for root device" error, enable after install is fine.
+
*No audio for on board (VIA VT17088). Kernel Panic on installer exit, restart, shutdown, Sleep - patch did not work. You MUST disable SATA before installing as it will goto "waiting for root device" error. Sata will not work at all even with patch.| Use RTL8111 kext to install onboard Network card. AppleAzalia Audio '''''MAY''''' work for audio fix.
 +
|No
 +
|No
 
|-
 
|-
 
|MB6497-RS
 
|MB6497-RS
Line 2,143: Line 2,173:
 
*Lan does not work. Needs patcher or compatible card
 
*Lan does not work. Needs patcher or compatible card
 
*IDE Works perfect
 
*IDE Works perfect
*SATA untested
+
*SATA is NOT WORKING. ('Still waiting for root device' Error)
 
*Shutdown / Restart / Sleep No problems shutting down or restarting, sleep doesn't work
 
*Shutdown / Restart / Sleep No problems shutting down or restarting, sleep doesn't work
 
*Needs to boot into Single User Mode after install to bypass Setup screen as it crashes on transfer screen.
 
*Needs to boot into Single User Mode after install to bypass Setup screen as it crashes on transfer screen.
Line 2,291: Line 2,321:
 
|
 
|
 
* Install Method: Kalyway 10.5.1 & Kalyway Combo Update
 
* Install Method: Kalyway 10.5.1 & Kalyway Combo Update
* BIOS Version: 3.70; Revision: 1.0
+
* BIOS Version: 3.70; Revision: Unknown
 
* Audio: ALC889A works with patch
 
* Audio: ALC889A works with patch
 
* LAN: Works OOB
 
* LAN: Works OOB
Line 3,071: Line 3,101:
 
|Intel G33
 
|Intel G33
 
|
 
|
* Follow this guide
+
* Follow this guide [http://www.insanelymac.com/forum/index.php?showtopic=131281]
* [http://www.insanelymac.com/forum/index.php?showtopic=131281]
+
* Kalyway 10.5.2 works perfectly on this motherboard.
 +
* Even Apple Final Cut 2 Studio works perfectly.
 +
* Tested by [http://www.facebook.com/profile.php?id=1343186070&ref=profile Muhammad Anil Babur Kiani]
 +
 
 
|EFI v8 + Vanilla Kernel Working
 
|EFI v8 + Vanilla Kernel Working
 
|Audio and IDE require patching, Lan required patching too
 
|Audio and IDE require patching, Lan required patching too
Line 3,937: Line 3,970:
 
|Working  
 
|Working  
 
|AMD Sempron(tm) Processor 3000+
 
|AMD Sempron(tm) Processor 3000+
 +
|Yes
 +
|-
 +
|AMD Athlon 64 2800+ Socket 754
 +
|Working
 +
|1.8GHz Unknown
 
|Yes
 
|Yes
 
|-
 
|-
Line 4,050: Line 4,088:
 
|2.01 GHz Unknown
 
|2.01 GHz Unknown
 
|Yes
 
|Yes
|-
 
|AMD Athlon 64 II x2 220
 
|Working with Maverick 10.9 (test on Niresh's 10.9)
 
|2.8 GHz
 
|Yes, with keys (amd, arch=x86_64, npci=0x2000, another keys look at your computer)
 
 
|-
 
|-
 
|AMD Athlon 64 LE1620 Socket AM2
 
|AMD Athlon 64 LE1620 Socket AM2
Line 4,449: Line 4,482:
 
|Yes
 
|Yes
 
|-
 
|-
|Radeon 9600 XT 128MB
 
|Sapphire
 
|Callisto driver 008
 
|Yes
 
|All
 
|No needs patching
 
 
|}  .
 
|}  .
  
Line 4,545: Line 4,572:
 
|No QE/CI and Resolution Change without NVinject or NVKush  
 
|No QE/CI and Resolution Change without NVinject or NVKush  
 
|-
 
|-
|} .
+
|}
  
 
===PCI Express===
 
===PCI Express===
Line 5,696: Line 5,723:
 
|No patch needed, just shows up as "Graphics by NVIDIA" in system profiler
 
|No patch needed, just shows up as "Graphics by NVIDIA" in system profiler
 
|-
 
|-
|} . . . .
+
|}
  
 
===Integrated===
 
===Integrated===
Line 6,091: Line 6,118:
 
|LW053
 
|LW053
 
|Sweex
 
|Sweex
|Ralink RT2571WF driver can be downloaded from [http://www.ralinktech.com/ralink/Home/Support/Macintosh.html]
+
|Ralink RT2571WF driver can be downloaded from [http://www.ralinktech.com/license_us.php?n=3&p=0&t=U0wyRnpjMlYwY3k4eU1ERXdMekEwTHpJd0wyUnZkMjVzYjJGa05qTTJNamMyT1RNNE5pNWtiV2M5UFQxU1ZGVlRRaUJFTnpGM0xURXVNeTR3TGpCZlZVa3RNeTR3TGpBdU1GOHlNREV3WHpBMFh6RXpD]
 
|Working with driver, however creates problems with the detection of USB devices in general
 
|Working with driver, however creates problems with the detection of USB devices in general
 
|-
 
|-
Line 6,355: Line 6,382:
 
|Realtek
 
|Realtek
 
|onboard Sound. requires patch found at [http://rapidshare.com/files/51585161/alc889a.zip.html Rapid Share]
 
|onboard Sound. requires patch found at [http://rapidshare.com/files/51585161/alc889a.zip.html Rapid Share]
 +
[http://www.uggsoutletugg.net uggs outlet]
 +
[http://www.baileybuttonugg.net ugg bailey button]
 
* [Updated by Muhammad Anil Babur Kiani]
 
* [Updated by Muhammad Anil Babur Kiani]
 
|Note. Once patched, in/out works. Detail Description at [http://www.insanelymac.com/forum/lofiversion/index.php/t52254.html Insanelymac]
 
|Note. Once patched, in/out works. Detail Description at [http://www.insanelymac.com/forum/lofiversion/index.php/t52254.html Insanelymac]
Line 6,453: Line 6,482:
 
|External FireWire Audio Interface. Tested with Logic 8 Pro, iTunes, Quicktime, etc -- all working flawlessly.  
 
|External FireWire Audio Interface. Tested with Logic 8 Pro, iTunes, Quicktime, etc -- all working flawlessly.  
 
|Works w/ standard Leopard driver from [http://www.motu.com/download MOTU])
 
|Works w/ standard Leopard driver from [http://www.motu.com/download MOTU])
 +
|-
 +
|MOTU 8Pre firewire
 +
|MOTU
 +
|External FireWire Audio Interface.
 +
|Works w/ standard Leopard driver from [http://ww.motu.com/download MOTU])
 
|-
 
|-
 
|RME Fireface 800
 
|RME Fireface 800
Line 6,659: Line 6,693:
 
|Creative
 
|Creative
 
|Works OOB
 
|Works OOB
 +
|Yes
 +
|-
 +
|USB DVD-RW/CDRW Drive
 +
|Optiarc DVD RW AD-7560S
 +
|BUFFALO
 +
|Generic Drive Support.
 
|Yes
 
|Yes
 
|-
 
|-
Line 7,064: Line 7,104:
 
|Yes
 
|Yes
 
|-
 
|-
|}
+
|-|} . . . . .

Please note that all contributions to OSx86 may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see OSx86:Copyrights for details). Do not submit copyrighted work without permission!

Cancel | Editing help (opens in new window)

Template used on this page:

Powered by MediaWiki © 2015 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   PHP hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers