HCL 10.5.2

From OSx86
(Difference between revisions)
Jump to: navigation, search
(Intel)
(Undo revision 70954 by Travis vlike (talk) (Remove spam link))
 
(762 intermediate revisions by more than 100 users not shown)
Line 12: Line 12:
 
==Motherboards==
 
==Motherboards==
  
=== Abit ===
 
  
 +
 +
 +
=== Abit ===
 +
'''INTEL CPU'''
 
{| class="wikitable" width="100%"
 
{| class="wikitable" width="100%"
!Hardware Name (alphabetical)
+
!Hardware Name (alphabetical)ƒ
 
!Chipset
 
!Chipset
 
!Notes
 
!Notes
 
!EFI/Vanilla kernel working
 
!EFI/Vanilla kernel working
 
!Fully Working w/o Patch
 
!Fully Working w/o Patch
 +
|-
 +
|AB9 Pro
 +
|Intel P965 & ICH8R
 +
|
 +
* Install Method (1): Leo4All v3
 +
* BIOS Version: 22
 +
* Audio: Works
 +
* LAN: Works
 +
* Install Instructions:
 +
*# Formatted as Fat32 using XP and Acronis (could've used anything), then erased with disk utility in OSX install
 +
*# Installed using Vanilla Kernel, and default SMBIOS selections under customize
 +
*# Complete Install and Reboot
 +
*# Use -v on first boot
 +
*# Used NVKush found [http://diabolik1605.com/DHF/ here]
 +
*# Update to 10.5.6 worked but not fully tested yet (using DSDT Patcher and OSX86 Tools.) Followed the guide [http://ihackintosh.blogspot.com/2008/12/prepare-your-hackintosh-for-updating-to.html here]
 +
-----
 +
* Install Method (2): Kalyway 10.5.2 dvd rom (SATA works - had problems using IDE optical drive)
 +
* BIOS Version: 22
 +
* LAN: Works OOB
 +
* USB: Some problems, solved using USB fix kext (see right ->>)
 +
* SOUND: Onboard works OOB, but requires kext for custom soundcards like M-Audio [http://audio-evolution.com/drivers/ here]
 +
* VID RESOLUTION: Depends on vid card, see [http://insanelymac.com/forum/index.php?showtopic=155477 here] for hd48xx thread!
 +
* Install Instructions:
 +
*# Installed via sata dvdrom (IDE not recognised) found [http://www.greensurfshop.com/brands/Matunas.html here]
 +
*# Seperate Sata HDD formatted (fat32) using Installer and installed onto
 +
*# Vanilla kernel worked fine, don't add or change anything yet at install.
 +
*# Use -v on first boot
 +
|EFI & Vanilla Kernel works
 +
-----
 +
Works out of box!
 +
|No patch needed for LAN
 +
-----
 +
Kalyway USB fix [http://insanelymac.com/forum/index.php?showtopic=117029 here] (if needed)
 +
Get kexthelperB7 to install kexts from [http://cheetha.net/ cheetha.net]
 
|-
 
|-
 
|AB9 QuadGT
 
|AB9 QuadGT
Line 85: Line 122:
 
|EFIv8 + Vanilla kernel
 
|EFIv8 + Vanilla kernel
 
|No; Audio needs patching
 
|No; Audio needs patching
 +
|-
 +
|IP35P
 +
|Intel® P35/ICH9 Chipset
 +
|
 +
* Install method: Kalyway 10.5.2
 +
* Kalyway:
 +
* Install options: Formatted GUID, EFIv8 + Vanilla Kernel
 +
* Updated to 10.5.4 from Apple Site + using Kalyway Intel combo update 10.5.3 + Kalyway 10.5.2 kernel
 +
* Leopard Graphics Update v1.0 worked with no hassle
 +
* Bios version: 11, Rev. unknown
 +
* Bios setup: SATA set to AHCI; EIST: enabled, Disable bit: enabled
 +
* Audio: Currently not working
 +
* SATA works as AHCI
 +
* IDE status: Working out of box
 +
* LAN Working out of the box
 +
* Firewire Working out of the box
 +
* Audio: Unknown
 +
* LAN: 1x Gigabit
 +
* SATA & IDE: 6 Built-In S-ATA ports in AHCI, 2 eSATA ports in AHCI (JMicron), 1 IDE port (JMicron), and 1 floppy port (JMicron). All working.
 +
|EFIv8 + Vanilla kernel
 +
|No; Audio Currently Not Working
 
|-
 
|-
 
|IP35-E
 
|IP35-E
Line 91: Line 149:
 
* Install Method: Kalyway 10.5.1 & Apple 10.5.2 Update
 
* Install Method: Kalyway 10.5.1 & Apple 10.5.2 Update
 
* BIOS Version: 15; Revision: Unknown
 
* BIOS Version: 15; Revision: Unknown
* Audio: Need patch from [http://forum.insanelymac.com/index.php?act=findpost&pid=506854 here]
+
* Audio: Need patch from [http://forum.insanelymac.com/index.php?act=findpost&pid=506854 here] or [http://www.rushessay.com/essay_papers.php essay]
 
* LAN: Works OOB
 
* LAN: Works OOB
 
* SATA & IDE: SATA works OOB, IDE works after install
 
* SATA & IDE: SATA works OOB, IDE works after install
Line 130: Line 188:
 
* BIOS version: 14  
 
* BIOS version: 14  
 
* Installation method: Leo4all v2 (10.5.2) with Vanilla Kernel 9.2.2
 
* Installation method: Leo4all v2 (10.5.2) with Vanilla Kernel 9.2.2
* Audio (ALC 883): 2ch only so far. Works with Azalia patch from [http://forum.insanelymac.com/index.php?showtopic=36520 skippyretard]. Tried the 883 kexts from Leo4all v2 install, latest Taruga's 5.1 kext (April 24th, 2008) and skippyretard's 883 pkg with no luck. Linux reconizes ALC883 OK. Maybe the guy up here with an ALC888 has a different mobo revision.
+
* Audio (ALC 883): 2ch only so far. Works with Azalia patch from [http://forum.insanelymac.com/index.php?showtopic=36520 skippyretard]. Tried the 883 kexts from Leo4all v2 install, latest Taruga's 5.1 kext (April 24th, 2008) and [http://www.greensurfshop.com/categories/Wetsuits/ mens wetsuits] skippyretard's 883 pkg with no luck. Linux reconizes ALC883 OK. Maybe the guy up here with an ALC888 has a different mobo revision.
 
* Video (GMA 950): Works with GMA950 driver from the Leo4all install DVD. QE/CI enabled and no artifacts. Resolution fixed at 1024x768, I changed it editing com.apple.Boot.plist adding <string>"Graphics Mode"="[email protected]"</string>. There is some minor mouse blinking when moving over the dock, hardly noticeable.
 
* Video (GMA 950): Works with GMA950 driver from the Leo4all install DVD. QE/CI enabled and no artifacts. Resolution fixed at 1024x768, I changed it editing com.apple.Boot.plist adding <string>"Graphics Mode"="[email protected]"</string>. There is some minor mouse blinking when moving over the dock, hardly noticeable.
 
* LAN: Works out of the box
 
* LAN: Works out of the box
Line 156: Line 214:
 
|No audio needs patching and onboard graphics don't allow resolution change or QE/CI due to no graphic kext.
 
|No audio needs patching and onboard graphics don't allow resolution change or QE/CI due to no graphic kext.
 
|-
 
|-
|Fatal1ty FP-1N SLI
+
|Fatal1ty FP-1N SLI (maybe [http://www.abit.com.tw/page/ru/motherboard/motherboard_detail.php?pMODEL_NAME=Fatal1ty+FP-IN9+SLI&fMTYPE=LGA775 FP-IN9]? there is no "1N")
 
|
 
|
 
* LGA 775
 
* LGA 775
Line 188: Line 246:
 
|Unknown
 
|Unknown
 
|All good
 
|All good
|} . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+
|-
 +
|I-45CV
 +
|
 +
* 945 GC / ICH7
 +
* GMA950
 +
|
 +
* Install method:  Kalyway 10.5.2 on 300GB Maxtor IDE
 +
* Processor: Intel Dual-Core E2200 2.2GHz
 +
* Audio:  Works OOB
 +
* USB:  Works OOB. Externall USB HD, USB pendrive, CF card reader, Bluetooth pen.
 +
* IDE : OK. Maxtor 300GB and Philips DVD burner.
 +
* SATA : Works OOB
 +
* LAN: Does not work. Not detected. I installed a 6€�realtek 8139 based card. Worked OOB
 +
* Video : Works OOB (intel GMA950 driver included on Kalyway). Resolutions up to 1280x1024
 +
* Power functions work Ok but not with Vanilla kernel. Sleep works if selected S1 mode on Bios.
 +
* RAM: 1x Kingston 2GB DDR2 667 working perfectly.
 +
* Price : 35€�MotherBoard
 +
|Vanilla kernel works, but power functions not ok. (doesn't resstart nor shutdown)
 +
|LAN doesn't work.
 +
|}
 +
'''AMD CPU'''
 +
{| class="wikitable" width="100%"
 +
!Hardware Name (alphabetical)
 +
!Chipset
 +
!Notes
 +
!EFI/Vanilla kernel working
 +
!Fully Working w/o Patch
 +
|-
 +
|Abit AN-M2[http://www.uabit.com/index.php?option=com_content&task=view&id=32&Itemid=48&page=1&model=384], [http://www.forumdeluxx.de/forum/showthread.php?t=352028 Sammelthread AN-M2 (german)]
 +
|
 +
* NF630a
 +
* NVIDIA® 7050
 +
|
 +
* Install Method: Kalyway 10.5.2, Atkos 10.5.2 AMD, Leo4Allv4.1
 +
* BIOS Version: Abit; Revision: 18
 +
* BIOS setup options: lan bootrom enable; sata->raid->AHCI
 +
* Audio: Works out of the box
 +
* LAN: [http://forum.insanelymac.com/index.php?showtopic=106675&pid=878087&mode=threaded&start=#entry878087 works with this] add 0x054C10DE to IOPCIPrimaryMatch (Info.plist), surfing [http://www.greensurfshop.com online surf shop] ok so far, issues with filezilla
 +
* IDE: Full DMA speed with AppleNforceATA.kext and IOATAFamily.kext from Leo4allv4.1 (MCP67)
 +
* SATA: not fully tested yet (enable AHCI under SATA/RAID)
 +
* USB: ok
 +
* VIDEO: Framebuffer only, no accel
 +
* Shutdown, restart works, sleep not tested
 +
* Install Instructions:
 +
*# Partitioned as MBR
 +
*# Installed using an AMD Kernel, and MBR selections under customize
 +
*# Complete install and reboot
 +
*# Use -s on first boot
 +
*# "mount -uw /" then "passwd" and set a password
 +
*# Delete or move all graphic driver: "cd /SYSTEM/LIBRARY/EXTENSIONS; rm NV*; rm ATI*"
 +
*# "touch /var/db/.AppleSetupDone" finally "exit"
 +
*# Edit /Library/Preferences/SystemConfiguration/com.apple.Boot.plist for your framebuffer screen resolution: <key>Graphics Mode</key><string>1280x1024x32</string>
 +
* Overall: A Cheap and very energy efficient AMD board (17W idle with Sempron1100/1200/0.8V, 2.5HD, PSU) 
 +
|EFI ok
 +
|LAN, IDE needs patching
 +
|-
 +
|} . . . . . . . .
  
 
=== Albatron ===
 
=== Albatron ===
Line 239: Line 353:
 
|EFI works
 
|EFI works
 
|Audio needs patching
 
|Audio needs patching
|-
 
 
|-
 
|-
 
|i975Xa-YDG
 
|i975Xa-YDG
Line 256: Line 369:
 
* LAN: Yes
 
* LAN: Yes
 
| Kalyway customization: Kernel_9.2.2_modin  for USB to work, NATIT_For_X2000_X3000_series for video to work  
 
| Kalyway customization: Kernel_9.2.2_modin  for USB to work, NATIT_For_X2000_X3000_series for video to work  
| Everything working OK
+
| Yes
|
+
 
|-
 
|-
|} . . . . .
+
|} .
  
 
=== Asrock ===
 
=== Asrock ===
 +
'''INTEL CPU'''
 
{| class="wikitable" width="100%"
 
{| class="wikitable" width="100%"
 
!Hardware Name  
 
!Hardware Name  
Line 269: Line 382:
 
!Fully Working w/o Patch
 
!Fully Working w/o Patch
 
|-
 
|-
|Conroe-1333 D667
+
|ASRock 945GCM-S
|Intel 945GC
+
|Intel 945gc & ICH7R
 
|
 
|
* Install Method: Kalyway 10.5.1 + Devin 10.5.2 Update method
+
*Fully working using iAtkos 2.0i, BIOS update not needed (using 1.20); Type "cpus=1" at install. It takes about 5 minutes at boot.
* BIOS Version: 1.3; Revision: Unknown
+
*Audio, video (Quartz, 1024x768, some mouse tearing) LAN, USB works ok. WLAN using D-Link DWA-520. Dual boot with XP, does not work with Windows 7.
* BIOS Options: HPET "Enabled", Execute bit "disabled", Suspend to ram "Auto"
+
|
* Audio: Need ALC888 patch but no input
+
|
* LAN: Works OOB
+
|-
* SATA & IDE: Works OOB
+
|Asrock 4core 1333 eSata2
|PC-EFI & Vanilla Kernel work
+
|Intel P31/G31 & ICH7R
|Audio needs patch
+
|
 +
*SATA and PATA and IDE works
 +
*Onboard Lan works
 +
*Attached Graphics card works fully
 +
*onboard USB 2 works
 +
*Onboard Audio works
 +
*Onboard Firewire does not work
 +
*Floppy Dirve does not work in Mac OS.
 +
|YES
 +
|Needed to install a BIOS update to work.
 +
Firewire needs patch
 +
|-
 +
|Asrock 4CoreDual SATA
 +
|VIA Apollo PT880Pro/PT894
 +
|
 +
* Install Method: Kalyway 10.5.1 & Kalyway Combo Updater
 +
* BIOS Version: 1.9; Revision: 1
 +
* Audio: Works OOB
 +
* LAN: ViaRhineIl works with Stevo4 Patch
 +
* SATA & IDE: Both work OOB (may need to append SATA ID 0x73721106 into AppleVIAATA.kext for SATA to work on SATA2 board)
 +
|PC-EFI works
 +
|LAN needs patching
 +
|-
 +
|[http://www.asrock.com/mb/overview.asp?Model=4CoreDual-SATA2&s=775 Asrock 4CoreDual-SATA2 ]
 +
|Northbridge: VIA® PT880 Pro/PT880 Ultra - Southbridge: VIA® VT8237S
 +
|
 +
* Install Method: Kalyway 10.5.1 w/TheStevo4 ppf + Kalyway 10.5.3 ComboUpdate
 +
* BIOS Version: 1.9  (2.0 doesn't works)
 +
* BIOS Options: defaults Options
 +
* Audio: ALC888 in & out stereo working (7.1 not tested)
 +
* LAN: ViaRhineII work with [http://rs333l3.rapidshare.com/cgi-bin/upload.cgi?rsuploadid=356858534414984233 this kext]
 +
* IDE: Works, SATA: Works with [http://rapidshare.com/files/135251416/Asrock_4CoreDual-SATA2.pkg.zip.html this PKG] or if you want to inject the kext into you iso file use [http://rapidshare.com/files/135249042/AppleVIAATA.kext.zip.html this kext] and use [http://macosx86.forums-actifs.com/tutoriels-mac-os-x86-f14/faire-reconnaitre-le-sata-a-son-hackintosh-t13.htm this method] for the english users use '''google translation'''
 +
* Sleep, Shutdown & Restart Works with the 10.5.2 Sleep_kernel
 +
|PC-EFI works, NO Vanilla Kernel (VIA Chipset)
 +
|TheStevo4 [http://rapidshare.com/files/123275598/theStevo4.zip Patch], alc888, ViaRhineII and SATA
 
|-
 
|-
 
|Asrock Conroe 1333
 
|Asrock Conroe 1333
|Intel 945GC & ICH7 Chipset
+
|Intel 945GC & ICH7
 
|
 
|
* Install method: Kalyway 10.5.1
+
* Install method: Kalyway 10.5.1 or Kalyway 10.5.2
 
* Install options: Vanilla Kernel, BOOT_efi_mbr
 
* Install options: Vanilla Kernel, BOOT_efi_mbr
 
* Updated to 10.5.2 using the original Apple combo update using Devin's procedure on insanelymac [http://forum.insanelymac.com/index.php?showtopic=87078&hl=]
 
* Updated to 10.5.2 using the original Apple combo update using Devin's procedure on insanelymac [http://forum.insanelymac.com/index.php?showtopic=87078&hl=]
 +
* Updated to 10.5.3 using Kalyway 10.5.3 combo update (had to reinstall discrete nVidia card driver afterward through NVinstaller to get Display Resolution change and QE/CI working again)
 +
* Updated to 10.5.4 using the original Apple update tool without any problems
 
* Leopard Graphics Update v1.0 normal install, works
 
* Leopard Graphics Update v1.0 normal install, works
* Bios version: P 1.30 (1.50 not work, downgraded to 1.30 and it works)
+
* Bios version: P 1.30 (no other firmware later than 1.30 works -tested up to 2.10-)
 
* SATA + PATA works
 
* SATA + PATA works
 
* Onboard LAN work
 
* Onboard LAN work
Line 295: Line 444:
 
|Audio needs patching
 
|Audio needs patching
 
|-
 
|-
|Conroe 1333
+
|Asrock Conroe 1333
|Intel 945GC
+
|Intel 945GC & ICH7
 
|
 
|
 
* Install Method: Kalyway 10.5.1 & Update to 10.5.2 following Netkas's guide
 
* Install Method: Kalyway 10.5.1 & Update to 10.5.2 following Netkas's guide
Line 307: Line 456:
 
|No, Audio needs patching
 
|No, Audio needs patching
 
|-
 
|-
|4CoreDual SATA
+
|Asrock Conroe-1333 D667 Rev. A/G 1.03
|VIA Apollo PT880Pro/PT894
+
|Intel 945GC & ICH7
 
|
 
|
* Install Method: Kalyway 10.5.1 & Kalyway Combo Updater
+
* Install Method: Kalyway 10.5.2
* BIOS Version: 1.9; Revision: 1
+
* '''Modified BIOS Version: 1.80'''; It's nice to have BIOS 1.80 because it supports latest CPUs
* Audio: Works OOB
+
* BIOS Options: Default Options
* LAN: ViaRhineIl works with Stevo4 Patch
+
* Audio: Works without Patches (Except Input)
* SATA & IDE: Both work OOB (may need to append SATA ID 0x73721106 into AppleVIAATA.kext for SATA to work on SATA2 board)
+
* LAN: Works OOB
|PC-EFI works
+
* SATA & IDE: Works OOB
|LAN needs patching
+
* You can find the Moded BIOS here[http://rapidshare.com/files/107425482/Modified_Asrock_Conroe_1333_BIOS_-_By_Kaly.zip.html]
 +
|PC-EFI & Vanilla Kernel work
 +
|Everything Works Without Patching. Credits go to Kabyl (InsanelyMac) He made the moded BIOS.
 +
|-
 +
|Asrock Conroe 1333 D667
 +
|Intel 945GC & ICH7
 +
|
 +
* Install Method: Kalyway 10.5.1 + Devin 10.5.2 Update method
 +
* BIOS Version: 1.3; Revision: Unknown
 +
* BIOS Options: HPET "Enabled", Execute bit "disabled", Suspend to ram "Auto"
 +
* Audio: Need ALC888 patch but no input
 +
* LAN: Works OOB
 +
* SATA & IDE: Works OOB
 +
|PC-EFI & Vanilla Kernel work
 +
|Audio needs patch
 +
|-
 +
|Asrock ConRoe945G-DVI
 +
|Intel 945G + ICH7
 +
|
 +
* Install Method: Kalyway 10.5.2 SleepKernel EFI8 MBR
 +
* BIOS Version: v1.90
 +
* Audio (ALC888): 2Ch Out Works with AppleAzaliaAudio and [http://wiki.osx86project.org/wiki/index.php/ConRoe945G-DVi KEXT-Edit]
 +
* LAN (R8111B): Works
 +
* SATA & IDE: Works
 +
* Video (GMA 950): Works
 +
|EFI v8 Works
 +
|Audio Needs patching
 +
|-
 +
 
 +
 
 +
|-
 +
|[http://www.asrock.com/mb/overview.asp?Model=775V88%2B Asrock 775V88+ ]
 +
|VIA® PT880 chipset
 +
|
 +
* Install Method: Kalyway 10.5.2
 +
* BIOS Version: Unkown
 +
* BIOS Options: Unkown
 +
* Audio: Works OOB. But only the left side of the speaker is working.
 +
* LAN: Needs Via Rhine Driver
 +
* IDE: Works OOB
 +
|Unkown
 +
|-
 +
 
 +
 
 +
|Asrock P4i65G
 +
|Intel 865G (North) & ICH5 (South)
 +
|
 +
* Install Method: Leo4Allv2 10.5.2
 +
* BIOS Options: Default options.
 +
* Audio: Need AC97 patch
 +
* LAN: Not Tested
 +
* SATA & IDE: IDE works fine, SATA not tested.
 +
* Also applied ICHx patch and used legacy APCI
 +
|PC-EFI works, no vanilla kernel.
 +
|Audio needs patch
 +
|}
 +
'''AMD CPU'''
 +
{| class="wikitable" width="100%"
 +
!Hardware Name (alphabetical)
 +
!Chipset
 +
!Notes
 +
!EFI/Vanilla kernel working
 +
!Fully Working w/o Patch
 
|-
 
|-
 
|Asrock 939 Dual-VSTA
 
|Asrock 939 Dual-VSTA
Line 330: Line 541:
 
|Onboard audio,  lan and ps/2 need patching
 
|Onboard audio,  lan and ps/2 need patching
 
|-
 
|-
| ASrock ALIVE NF6G-VSTA
+
|Asrock 939Dual-SATA2
 +
|Northbridge: ULi M1695  Southbridge: ULi M1567
 +
|
 +
* Install Method: Zephyroth AMD 10.5.2 Rev.2
 +
* Options: 9.2 kernel
 +
* Audio: ULi M5455
 +
* LAN: ULi 5263
 +
* SATA & IDE (SATA only working from II slot)
 +
|unknown'
 +
|Onboard audio, lan (lan works after install until first reboot then breaks) need patching ('''Works in 10.5.4!'''  See [[HCL_10.5.4#Asrock]] and threads for [http://www.insanelymac.com/forum/index.php?showtopic=156517 LAN driver] and [http://www.insanelymac.com/forum/index.php?showtopic=135191 Audio driver])
 +
|-
 +
|Asrock ALIVE NF6G-VSTA
 
| NForce 4 (MCP61)
 
| NForce 4 (MCP61)
 
|  
 
|  
Line 344: Line 566:
 
* Audio, SATA and Network need patching (IDE is slow without the patch)
 
* Audio, SATA and Network need patching (IDE is slow without the patch)
 
|-
 
|-
|P4i65G
+
|Asrock ALiveNF7G-FullHD R3.0 [http://www.asrock.com/mb/index.asp?s=n], [http://www.forumdeluxx.de/forum/showthread.php?s=9010770130ccc38650cc5dfbf3b2aafd&t=368420 Sammelthread ALiveNF7G-FullHD/Ready/720p (german)]
|Intel 865G (North) & ICH5 (South)
+
 
|
 
|
* Install Method: Leo4Allv2 10.5.2
+
* NF630a
* BIOS Options: Default options.
+
* NVIDIA® 7050
* Audio: Need AC97 patch
+
* LAN: Not Tested
+
* SATA & IDE: IDE works fine, SATA not tested.
+
* Also applied ICHx patch and used legacy APCI
+
|PC-EFI works, no vanilla kernel.
+
|Audio needs patch
+
|-
+
|Conroe-1333 D667 Rev. A/G 1.03
+
|Intel 945GC
+
 
|
 
|
* Install Method: Kalyway 10.5.2
+
* Install Method: Kalyway 10.5.2, Atkos 10.5.2 AMD, Leo4Allv4.1
* '''Modified BIOS Version: 1.80'''; It's nice to have BIOS 1.80 because it supports latest CPUs
+
* BIOS Version: Asrock; Revision: 1.10 (5/26/2008)
* BIOS Options: Default Options
+
* BIOS setup options: -
* Audio: Works without Patches (Except Input)
+
* Audio: Works out of the box
* LAN: Works OOB
+
* LAN: [http://forum.insanelymac.com/index.php?showtopic=106675&pid=878087&mode=threaded&start=#entry878087 works with this] add 0x054C10DE to IOPCIPrimaryMatch (Info.plist), surfing ok so far, issues with filezilla
* SATA & IDE: Works OOB
+
* IDE: Full DMA speed with AppleNforceATA.kext and IOATAFamily.kext from Leo4allv4.1 (MCP67)
* You can find the Moded BIOS here[http://rapidshare.com/files/107425482/Modified_Asrock_Conroe_1333_BIOS_-_By_Kaly.zip.html]
+
* SATA: not tested yet
|PC-EFI & Vanilla Kernel work
+
* USB: ok
|Everything Works Without Patching. Credits go to Kabyl (InsanelyMac) He made the moded BIOS.
+
* VIDEO: Framebuffer only, no accel
 +
* Shutdown, restart works, sleep not tested
 +
* Install Instructions:
 +
*# Partitioned as MBR
 +
*# Installed using an AMD Kernel, and MBR selections under customize
 +
*# Complete install and reboot
 +
*# Use -s on first boot
 +
*# "mount -uw /" then "passwd" and set a password
 +
*# Delete or move all graphic driver: "cd /SYSTEM/LIBRARY/EXTENSIONS; rm NV*; rm ATI*"
 +
*# "touch /var/db/.AppleSetupDone" finally "exit"
 +
*# Edit /Library/Preferences/SystemConfiguration/com.apple.Boot.plist for your framebuffer screen resolution: <key>Graphics Mode</key><string>1280x1024x32</string>
 +
* Overall: A cheap, stable and energy efficient AMD board (19W idle with AMD 4850e/1200/0.8V, 2.5HD, PSU). Good undervolting-BIOS: 0.8V
 +
|EFI ok
 +
|LAN, IDE needs patching
 
|-
 
|-
|4CoreDual-SATA2 (R1.0][http://www.asrock.com/mb/overview.asp?Model=4CoreDual-SATA2&s=775]
+
|Asrock ALiveNF7G-HDReady [http://www.asrock.com/mb/overview.asp?Model=ALIVENF7G-HDREADY], [http://www.forumdeluxx.de/forum/showthread.php?s=9010770130ccc38650cc5dfbf3b2aafd&t=368420 Sammelthread ALiveNF7G-FullHD/Ready/720p (german)]
|Northbridge: VIA® PT880 Pro/PT880 Ultra - Southbridge: VIA® VT8237S
+
|
 +
* nForce 630a (MCP67)
 +
* NVIDIA® 7050
 
|
 
|
* Install Method: Kalyway 10.5.1 w/TheStevo4 ppf + Kalyway 10.5.2 Update
+
* Install Method (advanced): Retail Leopard installed with custom [http://forum.insanelymac.com/index.php?showtopic=123841 Pre-Boot CD]
* BIOS Version: 1.(latest)
+
* Kernel: [http://forum.insanelymac.com/index.php?showtopic=139758 Voodoo XNU Kernel 1.0 Rev. A]
* BIOS Options: USB Legacy support enabled, Suspend to ram "Auto"
+
* BIOS Version: Asrock; Version: 2.10 (1/7/2008)
* Audio: ALC888 in & out stereo working (7.1 not tested)
+
* BIOS setup options: -
* LAN: VIA PHY VT6103 not yet tested but should work.
+
* Audio: Realtek ALC888, Device ID: 0x055c10de / 0x18490888, [http://forum.insanelymac.com/index.php?showtopic=129058 Legacy AppleHDA for BOOT-132]
* IDE: Works, SATA: not yet tested
+
* LAN: Realtek RTL8211B, Device ID: 0x054c10de,  Driver: [http://forum.insanelymac.com/index.php?showtopic=125569 nForce LAN driver], working OOTB since 10.5.6
|PC-EFI works, NO Vanilla Kernel (VIA Chipset)
+
* IDE: MCP67, Driver: [http://forum.insanelymac.com/index.php?showtopic=110817&st=0&p=792518& NForceATAController for MCP67]
|Stevo4 patches (see ASRock wiki page)
+
* SATA: not tested yet
 +
* Firewire: not tested yet
 +
* USB: OK
 +
* Video: Integrated Geforce 7050 with shared memory, no
 +
* Shutdown, restart and sleep works (I had to change USB/PS2 standby power jumper)
 +
|EFI ok
 +
|IDE, sound, LAN needs patching
 
|-
 
|-
|ConRoe945G-DVI
+
|Asrock ALiveXFire-eSATA2
|Intel 945G + ICH7
+
|Northbridge: ATI CrossFire Xpress 1600 (RD480)
 +
Southbridge: ATI  SB600
 
|
 
|
* Install Method: Kalyway 10.5.2 SleepKernel EFI8 MBR
+
* Install Method: Zephyroth AMD 10.5.2 Rev.1
* BIOS Version: v1.90
+
* BIOS Version: 2.60+; Revision: Unknown
* Audio (ALC888): 2Ch Out Works with AppleAzaliaAudio and [http://wiki.osx86project.org/wiki/index.php/ConRoe945G-DVi KEXT-Edit]
+
* BIOS Options: If you want to install on a SATA drive, make sure in the IDE menu, "AHCI" is chosen rather than "Non-Raid" otherwise you may get errors
* LAN (R8111B): Works
+
* LAN: Works OOB
* SATA & IDE: Works
+
* SATA & IDE: Works OOB
* Video (GMA 950): Works
+
|unknown
|EFI v8 Works
+
|Audio may need patching
|Audio Needs patching
+
|} . . . . . . . . . . .
|} . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+
  
 
=== Asus ===
 
=== Asus ===
 
+
'''INTEL CPU'''
{| class="wikitable" width="100%"
+
{|-| class="wikitable" width="100%"
 
!Hardware Name  
 
!Hardware Name  
 
!Chipset
 
!Chipset
Line 403: Line 636:
 
!Fully Working w/o Patch
 
!Fully Working w/o Patch
 
|-
 
|-
|Maximus Formula X38
+
|Rampage Formula
|X38
+
|Intel X48 + ICH9R
 
|
 
|
* Install Method: Kalway 10.5.2
+
* Install Method: Kalyway 10.5.2 with SATA Optical drive
* BIOS Version: 1201; Revision: Unknown
+
* BIOS Version: 0403
 +
* ADI 1988B Audio: works
 +
* Marvell 88E8056 LAN: both port works
 +
* ICH9R SATA: all 6 ports working
 +
* JMicron JMB368 PATA: works (except optical drive)
 +
* USB: all working
 +
* Firewire: not yet tested
 +
* This board works with 9800GX2 on second PCI-E slot using apple's 9800GX2 OpenGL driver when updated to 10.5.5
 +
|EFI working, only 9.2 sleep kernel allow fully functional sleep/wake and shutdown.
 +
|Yes. For Kalyway 10.5.2, update with Kalyway 10.5.3 combo + kernel update, 10.5.4 through Apple update. 10.5.5 not yet tested. Only ToH 9.2 sleep kernel works.
 +
|-
 +
| P5VD2-MX SE
 +
| VIA P4M890
 +
|
 +
* Intel Pentium D 805 Smithfield 2.66GHz, also used Intel Pentium D 935 Presler 3.2GHz with much success.
 +
* Install Method: Kalyway 10.5.2
 +
* BIOS Version: unknown
 +
*Audio: works after use of OSx86 Tools
 +
* Realtek LAN: works after use of Osx86 Tools (used and old LAN from a Compaq Presario Pentium 2, worked OBO, then downloaded and installed kext for Realtek)
 +
* SATA: comes and goes
 +
* USB: all working
 +
* Firewire: works fine
 +
* VGA: Nvidia 6200 LE 128MB, installed Titan Driver and EFI strings, got rid of crappy 1024X786 resolution, now running at 1440X900.  XFX 7600 256MB Nvidia card also works but system prefers the older card for some reason.
 +
|EFI working, Chameleon V8 installed afterwards, Darwin was shaky, had to use Boot123 to get system working
 +
|Not exactly, but Osx86 Tools fixes almost everything.  Just don't try to update to 10.5.6 or 10.5.7. Do not try to update to higher system, tried using Atkos 10.5.5 and iPC 10.5.6, both fail after three reboots.
 +
|-
 +
|P5E Deluxe
 +
|Intel X48 + ICH9R
 +
|
 +
* Install Method: Kalyway 10.5.2 / iATKOS_Si 10.5.5 with SATA Optical drive
 +
* BIOS Version: 0205
 +
* ADI 1988B Audio: works (kalyway default selection works, iATKOS need patch from [http://forum.insanelymac.com/index.php?showtopic=103602 here])
 +
* Marvell 88E8056 LAN: works (kalyway default selection works, iATKOS need to install the marvel pkg extracted from kalyway dvd)
 +
* ICH9R SATA: all 6 ports working
 +
* JMicron JMB368 PATA: not yet tested
 +
* USB: all working (if system is 10.5.4 or above, 9.2 sleep kernel will not mount any usb device, need 9.5 voodookernel)
 +
* Firewire: not yet tested
 +
|EFI working, 10.5.3 or older + 9.2 sleep kernel allow fully functional sleep/wake and shutdown, otherwise 10.5.4 or above need 9.5 voodoo kernel
 +
|Yes. everything works right out of the box with all default selections with Kalyway. Sounds/Lan need patching if using iATKOS_Si 10.5.5
 +
|-
 +
|Maximus Formula
 +
|Intel X38 + ICH9R
 +
|
 +
* Install Method: Kalyway 10.5.2
 +
* BIOS Version: 1201
 
* Audio: [http://wiki.taruga.net/tiki-index.php Speaker and Digital Out works] (sometimes have some minor issues)
 
* Audio: [http://wiki.taruga.net/tiki-index.php Speaker and Digital Out works] (sometimes have some minor issues)
 
* LAN: OOB
 
* LAN: OOB
Line 423: Line 700:
 
|-
 
|-
 
|P5E
 
|P5E
|Intel X38
+
|Intel X38 + ICH9R
 
|
 
|
 
* Install Method: Kalyway 10.5.1 - Install Info Below
 
* Install Method: Kalyway 10.5.1 - Install Info Below
Line 444: Line 721:
 
|Yes
 
|Yes
 
|-
 
|-
|P5E-VM DO
+
|P5W DH Deluxe
|Intel® Q35 / ICH9DO
+
|Intel 975X + ICH7R
 
|
 
|
*Install Method: Kalyeay Leopard 10.5.1, manual Update 10.5.2 kalyway combo update,
+
* Install Method: Kalyway 10.5.1/10.5.2
*BIOS revision: latest, BIOS settings for stock/vanilla kernel with sleep mode bit problem])
+
* BIOS Version: 2602; Revision: 1.04G
*Audio: Realtek® ALC883, 8-channel High-Definition Audio CODEC: works out of the box, some problem after 10.5.2
+
* Audio: Realtek ALC882M works
*LAN: Intel® 82566DM PCIe Gigabit LAN controller: not work patch unavailable
+
* LAN: Marvell 88E8053 both ports work out of box
*SATA: works out of the box
+
* SATA: all port works, ICH7R IDE works, Jmicron IDE work
*IDE: no test
+
* Onboard WiFi work with realtek 8187 drivers but unstable|
*onboard USB to front:works out of the box
+
* Onboard FireWire: Both ports (1 backpanel and 1 in case) work OK.
*onboard USB to back: works out of the box
+
* ez_raid ports work out of the box, natively. Raid0 works natively.
*onboard Intel® Graphics Media Accelerator 3100 (Intel® GMA 3100) integrated: bypass by PEAK Geforce 7300 GT: work whit Vinject :-) )
+
| Yes
|no kernel vanilla patch apply and works well
+
| onboard wifi needs patching
|95% working out of the box, some problem with network card intel pro 100 autodisconnect after computer stanby.U sb device storage auto unmount. Running  stable in the end!
+
 
|-
 
|-
|ASUS P5K
+
|P5QL-PRO
|Intel P35 + ICH9 Chipset
+
|Intel P43 + ICH10
 +
|
 +
* Install method: iDeneb 10.5.5
 +
* BIOS Version: Pathced 0601 [http://www.osxcores.site50.net/page1/files/P5QL-ASUS-PRO-0601.ROM.zip DSDT FIX].
 +
* Audio: Realtek ALC1200 - work with [http://rapidshare.com/files/130398042/p45audio.zip.html ALCInject.kext & AppleHDA.kext].
 +
* LAN: Attansic L1 - kext from iDeneb disk doesn't work. Use PCI Realtek.
 +
* SATA - OOB.
 +
* IDE - did't test.
 +
* ACPI (Shutdown, reboot) - work fine.
 +
* Video: nvidia 7300 GT - work with NVinject from iDeneb disk.
 +
|
 
|
 
|
* Install Method: Kalway 10.5.1 - upgraded to 10.5.2
 
* BIOS Version: Unknown; Revision: Unknown
 
* Audio: Using onboard with ALC883 installer
 
* LAN works with [http://forum.insanelymac.com/index.php?act=attach&type=post&id=25427 this] driver
 
* SATA & IDE: SATA works, in AHCI Mode
 
Stable having flashed P5KR bios 403 on P5K using AFUDOS /N to force ICH9 into AHCI mode
 
Now running for week stable with MAXMEM = 3072 in boot.plist, kept crashing without this option with 4GIG of RAM
 
|EFI & Vanilla Kernel
 
|Audio and LAN need patching
 
 
|-
 
|-
|P5K-VM
+
|P5K Deluxe WiFi
|Intel® G33 + ICH9
+
|Intel P35 + ICH9R
 
|
 
|
* '''WORKS OUT OF THE BOX'''
+
* Install Method: Kalyway 10.5.2, updated to 10.5.3 with Kalyway combo 10.5.3 update, iDeneb 10.5.5
*Install Method: Kalyway 10.5.2, manual 10.5.3 Kalyway combo update (works),  
+
* BIOS Version: 812; Revision: Unknwon
*BIOS revision: latest, BIOS settings standard
+
* Audio: Internal AD1988B only stereo out WORKS OUT OF BOX,audio in: works after patching with Taruga AD1988B rev3 Installer. but require to reinstall video.
*CPU: Overclocking no problem (Wolfdale)
+
* LAN1: Realtek  WORKS OUT OF BOX, required to be ON in BIOS for Time machine to work
*RAM: 8 GB (4 x 2 GB) DDR2 800 MHz recognized
+
* LAN2: Marvel Yukon on internal PCIe bus fully works WORKS OUT OF BOX
*Audio: Realtek® ALC883, 8-channel High-Definition Audio CODEC: analogue works out of the box (selected during install)
+
* WLAN: Does not work, but there exists a patch to get it working
*LAN: Marvell88E8056® PCI-E Gigabit LAN controller: works out of box
+
* SATA & IDE: Both SATA controllers fully work, IDE CD-ROMs and DVD-RW work
*SATA: All 4 ports work out of the box
+
|EFI & Vanilla Kernel Work
*IDE: JMicron® JMB368 works out of bo
+
|YES
*USB: works out of the box
+
*Firewire: works out of the box
+
*onboard Intel® Graphics Media Accelerator 3100 works but: bypassed by Asus 7300 GT 256 MB: works (nVidia kext selected during install)
+
|Yes
+
|near 100% working out of the box, sometimes does not completely shut down
+
 
|-
 
|-
|Asus P5K-E WiFi/AP
+
|P5K-E WiFi/AP
|Intel P35 + ICH9 Chipset
+
|Intel P35 + ICH9R
 
|
 
|
 
* '''WORKS OUT OF THE BOX:'''
 
* '''WORKS OUT OF THE BOX:'''
* ICH9     6x  Sata ports  
+
* ICH9 6x  Sata ports  
 
* Jmicron  2x  E-Sata ports
 
* Jmicron  2x  E-Sata ports
 
* Firewire, USB, COM1
 
* Firewire, USB, COM1
 
* '''WORKS AFTER PATCHING:'''
 
* '''WORKS AFTER PATCHING:'''
* Audio=ad1988b fully working (stereo, 5.1 digital output, microphone,volume control) using taruga's drivers: http://wiki.taruga.net/tiki-index.php
+
* Audio=ad1988b fully working (stereo, 5.1 digital output, microphone,volume control) using taruga's drivers: [http://wiki.taruga.net/tiki-index.php]
 
* Lan=marvel88e8056
 
* Lan=marvel88e8056
 
* Wifi=realtek 8187l, configured as ethernet and uses Realtek app.   
 
* Wifi=realtek 8187l, configured as ethernet and uses Realtek app.   
 
* Leopard WIFI drivers now available [ftp://210.51.181.211/cn/wlan/87_Mac10.4_v1309.zip here!]
 
* Leopard WIFI drivers now available [ftp://210.51.181.211/cn/wlan/87_Mac10.4_v1309.zip here!]
 
* '''WORKS FOR SOME/GIVES SYSTEM CRASHES'''
 
* '''WORKS FOR SOME/GIVES SYSTEM CRASHES'''
* IDE/PATA ports work for me, <- "which driver do you use, btw do you also have 4gb ram?" 
+
* IDE/PATA works
 
* '''BIOS SETTINGS (Update to latest 1004 or 1006):'''
 
* '''BIOS SETTINGS (Update to latest 1004 or 1006):'''
*   Set HDD-controllers 'ich9/jmicron' to AHCI mode, powerstate=S3
+
* Set HDD-controllers 'ich9/jmicron' to AHCI mode, powerstate=S3
*   Processor: Enable apic2.0, disable speedstep, disable c1e, enable VT and XT
+
* Processor: Enable apic2.0, disable speedstep, disable c1e, enable VT and XT
*   4gb ram working < dependent on BIOS settings, read the forum if you have kernel panic!!!  
+
* 4gb ram working < dependent on BIOS settings, read the forum if you have kernel panic!!!  
 
* '''Install method easy:'''
 
* '''Install method easy:'''
 
* Kalyway 10.5.1 Install DVD 'select right patches, try MBR if GUID fails'
 
* Kalyway 10.5.1 Install DVD 'select right patches, try MBR if GUID fails'
 
* Updated to 10.5.2 using Kalyway ComboUpdate and kernel update.
 
* Updated to 10.5.2 using Kalyway ComboUpdate and kernel update.
 +
* Updated to 10.5.4 using software update (vanilla 9.4 kernel works great, sleep works, everything works :D)
 
* iATkOS users use this [http://forum.insanelymac.com/index.php?showtopic=69132 thread]
 
* iATkOS users use this [http://forum.insanelymac.com/index.php?showtopic=69132 thread]
 +
* '''Another Install Method (that I used after the easy method failed for me):'''
 +
* Kalyway 10.5.1 Install DVD 'deselect everything except vanilla kernel, and MBR'
 +
* Immediately update to 10.5.3 using Kalyway ComboUpdate, following its instructions closely (meaning apply kernel update before rebooting)
 +
* Immediately update to 10.5.4 using software update (vanilla 9.4 kernel)
 +
* Then install drivers like NVInstaller v.52 (if you have an nvidia video card) or audio drivers, etc.
 
* '''Install method advanced:'''
 
* '''Install method advanced:'''
 
* Retail-Leopard-DVD, GUID, pc-efi8, with retail kexts 'remove appleintelcpupowermanagment.kext, add dsmos.kext', only AUDIO/LAN/VIDEO.kexts needs to be added after that, also may add applesmbios.kext for showing right info in system profiler.
 
* Retail-Leopard-DVD, GUID, pc-efi8, with retail kexts 'remove appleintelcpupowermanagment.kext, add dsmos.kext', only AUDIO/LAN/VIDEO.kexts needs to be added after that, also may add applesmbios.kext for showing right info in system profiler.
Line 518: Line 796:
 
|On DVD (Kalyway) or patch (iAtkos)
 
|On DVD (Kalyway) or patch (iAtkos)
 
|-
 
|-
|P5K Deluxe WiFi
+
|P5K Premium/WiFi-AP
|Intel P35 & ICH9R
+
|Intel P35 &Intel ICH9R
 
|
 
|
* Install Method: Kalyway 10.5.2
+
* Kalyway 10.5.2
* BIOS Version: 812; Revision: Unknwon
+
* Version 0802
* Audio: Internal AD1988B only stereo out WORKS OUT OF BOX,  audio in: works after patching with Taruga AD1988B rev3 Installer. but require to reinstall video.
+
* ADI AD1988B, AzaliaAudio only back connection
* LAN1: Realtek, not tested, Shut off in bios WORKS OUT OF BOX, required to be ON in BIOS for Time machine to work
+
* RealtekRTL8110SC & Marvell88E8056
* LAN2: Marvel Yukon on internal PCIe bus fully works WORKS OUT OF BOX
+
* SATA works, IDE Works not as good
* WLAN: Does not work, but there exists a patch to get it working
+
* HP dvd1070, works out of the box. all burning features working
* SATA & IDE: Both SATA controllers fully work, IDE CD-ROMs and DVD-RW work
+
* Restart and Shut down working out of box, sleep with newer version of kernel
|EFI & Vanilla Kernel Work
+
|yes
|YES
+
|USB(memory sticks and cards) issues: only reads if was installed at start up.
 
|-
 
|-
 
|P5KC
 
|P5KC
Line 544: Line 822:
 
|No. LAN doesn't work
 
|No. LAN doesn't work
 
|-
 
|-
|P5KPL-VM
+
|P5K
|Intel G31 & ICH7
+
|Intel P35 + ICH9
 
|
 
|
* Install Method: Kalyway 10.5.1, Combo Updater, Netkas method
+
* Install Method: Kalway 10.5.1 - upgraded to 10.5.2
* Bios release: 303
+
* BIOS Version: Unknown; Revision: Unknown
* Audio work
+
* Audio: Using onboard with ALC883 installer
* LAN Attansic/Atheros L1 work with [http://forum.insanelymac.com/index.php?showtopic=40851&st=300&gopid=707720&# DaemonES/MadInt driver]
+
* LAN works with [http://forum.insanelymac.com/index.php?act=attach&type=post&id=25427 this] driver (maybe hangs after sleep)
* GMA3100 Don't work yet
+
* SATA & IDE: SATA works, in AHCI Mode
* NV7600GT 256MB (with nvinject)
+
Stable having flashed P5KR bios 403 on P5K using AFMotherboard ModelUDOS /N to force ICH9 into AHCI mode
* System Profiler unstable (Need patch from 10.4.10)
+
Now running for week stable with MAXMEM = 3072 in boot.plist, kept crashing without this option with 4GIG of RAM
|PC_EFI_V8 + Grub, Vanilla Kernel
+
|EFI & Vanilla Kernel
|No
+
|Audio and LAN need patching
 +
|-
 +
|P5K EPU
 +
|Intel P35 + ICH9
 +
|
 +
* Install Method: Kalway 10.5.2
 +
* BIOS Version:; Revision: Unknown
 +
* Audio: Using onboard with ALC883 installer. Inline/mic don't work, 5.1 channels works. All channels works with AppleHDA patcher method.
 +
* LAN: OOB
 +
* SATA : OOB
 +
* FireWire : OOB
 +
* USB : OOB for all 8 USB ports
 +
* Optical Drive: sata Samsung generic DVD-R
 +
* Shutdown and reboot work, sleep freeze on wake up. Only tested with Vanilla
 +
* 4Gb ram with no problem.  
 +
* Mixing PS/2 keyboard and USB mouse with no problem.
 +
|Yes
 +
|No, sound need patching, use AppleHDA patcher to get all channels input and output.
 
|-  
 
|-  
|P5K-SE
+
|P5K PRO
|Intel P35 & ICH9
+
|Intel P35 + ICH9R
 +
|
 +
* Install Method: Leo4all v.3 and Kalyway 10.5.3 combo update
 +
* BIOS Version:0806 BIOS setting: no changes needed, standard
 +
* Audio: Realtek ALC883 - functional with 883 driver and patched kernel
 +
* LAN: Marvell 88E8056 - functional using SKGE driver
 +
* SATA & IDE: This board uses Marvell IDE driver, so you need to instal both drivers for Intel ICHx chipsets and "VIA Sis Marvell and SB chipset driver".
 +
* Optical Drive: LG multi format drive on IDE, no problem
 +
* USB - works OOB
 +
* Do shutdown, reboot and sleep work? With Vanilla kernel yes, with patched kernel no. But Vanilla has problem with Core 2 Quad processor.
 +
*
 +
|Yes
 +
|Almost everything works OOB, with patched kernel does not work power management.
 +
|-
 +
|P5K SE
 +
|Intel P35 + ICH9
 
|
 
|
 
* Install Method: Kalyway 10.5.2 and 10.5.3 Combo Updater
 
* Install Method: Kalyway 10.5.2 and 10.5.3 Combo Updater
* CPU: manual overclocking possible
+
* BIOS: 1008, standard settings
 +
* CPU: manual overclocking possible (45 nm CPU tested)
 
* Audio: select alc883 kext during install (only tested analog stereo line-out, line-in an mic in: works).
 
* Audio: select alc883 kext during install (only tested analog stereo line-out, line-in an mic in: works).
* LAN: Onboard doesn't work, PCI-card Realtek RTL8169works out of box, D-Link DGE530T 1GigE with skge-e.kext (Driver from D-Link website doesn't work).
+
* LAN: Onboard LAN requires installation of the [http://forum.insanelymac.com/index.php?s=&showtopic=40851&view=findpost&p=724044 DaemonES/MadInt driver/package]. If you put your computer to sleep, onboard LAN stops working at wake up. It works again after rebooting.
* SATA & IDE: SATA works, IDE and E-SATA does not work because of no kext for Marvel chip 88SE6111
+
**PCI-card Realtek RTL8169 works out of box; D-Link DGE530T 1GigE with skge-e.kext (Driver from D-Link website doesn't work).
* USB: Requires legacy support to be disabled in bios.
+
* SATA: SATA works alright out of the box (as long as you don't enable SATA RAID).
* Optical Drive: USB Optical Drive
+
* IDE (and possibly E-SATA) - Marvell chip 88SE61xx - needs patching: [http://my.ukrweb.info/en/node/73 Marvell and others ATA kext for Leopard, by podarok] - works after patch but crashes sometimes during trys to burn a DVD with Toast.
* Graphics: Point of View Nvidia 8800GTS with nvinstaller 0.33 - 1920x1200 with full Quarts Extreme and Core Image support (QE/CI). -- Had to replace old Nvidia 6800GT because QE/CI acceleration wouldn't work in Leopard. -- Asus 7300 GT (256 MB) works with nVidia kext selected during installation.
+
* USB: Works without problems
 +
* USB Booting: Functional, at least after installing with internal SATA connection. Bear in mind that your system may lock up if power settings are configured to turn the HDD off after a certain period of inactivity.
 +
* Optical Drive: IDE, SATA, and USB Optical Drives are supported.
 
|Yes
 
|Yes
|No, neither onboard lan nor IDE is working.
+
|No: both onboard LAN and IDE require patching.
 
|-
 
|-
|P5W DH Deluxe
+
|P5E-VM HDMI
|Intel 975X & ICH7R
+
|Intel G35 & ICH9R
 
|
 
|
* Install Method: Kalyway 10.5.1 and 10.5.2 Combo Updater
+
* Install Method: Kalway 10.5.2
* BIOS Version: 2602; Revision: 1.04G
+
* BIOS Version: 0506
* Audio: Realtek ALC882M works
+
* Onboard Audio works - ALC 883 (S/PDIF not tested yet)
* LAN: Marvell 88E8053 both ports work out of box
+
* Onboard Firewire works - VIA VT6308P
* SATA: all port works, ICH7R IDE works, Jmicron IDE does work (non atapi device as indicated in manual)
+
* Onboard Video (x3500) works but not accelerated VESA 3.0
* Onboard WiFi does work, with realtek 8187 drivers.|
+
* Onboard SATA works, PATA not tested
* ez_raid ports work out of the box, natively. Raid0 works natively.
+
* HDMI Output not tested yet
 +
* Onboard LAN does not work OOB - Atheros L1 PCI-E Gigabit works with [http://forum.insanelymac.com/index.php?s=&showtopic=40851&view=findpost&p=724044 DaemonES/MadInt driver/package].
 +
* Onboard RAID does not work out of the box
 +
* Shutdown and Reboot works perfectly, Sleep does not work
 +
* Startup welcome movie works
 +
* USB 2.0 ports working (BIOS: Advanced > USB Configuration > Bios EHCI Hands-off "disabled")
 +
* Used Vanila Kernel
 +
|EFI working
 +
|Everything but LAN is working
 +
|-
 +
|P5E-VM DO
 +
|Intel Q35 + ICH9DO
 
|
 
|
 +
*Install Method: Kalyeay Leopard 10.5.1, manual Update 10.5.2 kalyway combo update,
 +
*BIOS revision: latest, BIOS settings for stock/vanilla kernel with sleep mode bit problem])
 +
*Audio: Realtek® ALC883, 8-channel High-Definition Audio CODEC: works out of the box, some problem after 10.5.2
 +
*LAN: Intel® 82566DM PCIe Gigabit LAN controller: not work patch unavailable
 +
*SATA: works out of the box
 +
*IDE: no test
 +
*onboard USB to front:works out of the box
 +
*onboard USB to back: works out of the box
 +
*onboard Intel® Graphics Media Accelerator 3100 (Intel® GMA 3100) integrated: not used)
 +
|no kernel vanilla patch apply and works well
 +
|some problem with network card intel pro 100 auto disconnect after computer stan-by usb device storage auto unmount. Running  stable in the end!
 
|-
 
|-
|P5W DH Deluxe
+
|P5K-VM
|975X, ICH7
+
|Intel G33 + ICH9
 +
|
 +
*Install Method: Kalyway 10.5.2, manual 10.5.3 Kalyway combo update (works), apple 10.5.4 update works
 +
*BIOS 803: latest, BIOS settings standard
 +
*CPU: Overclocking no problem (Wolfdale)
 +
*RAM: 8 GB (4 x 2 GB) DDR2 800 MHz recognized
 +
*Audio: Realtek® ALC883, 8-channel High-Definition Audio CODEC: analogue works out of the box (selected during install, only stereo tested), can't get the front audio panel to work (neither digital nor AC97)
 +
*LAN: Marvell88E8056® PCI-E Gigabit LAN controller: works out of box. I had to use EFI String to get TimeMachine to work, because it can't find the MAC address.
 +
*SATA: All 4 ports work out of the box *need to set SATA mode to AHCI in bios*
 +
*IDE: JMicron® JMB368 works out of the box
 +
*USB: works out of the box. I had to disable PCGenUSB in Kalyway installation to get USB Mass Storage working properly
 +
*Firewire: works out of the box
 +
*onboard Intel® Graphics Media Accelerator 3100 works. With Apple graphics update I tested 1600x1200x32, but resolution must be set with Kernel parameter at boot.
 +
* Software RAID is working using Chameleon
 +
|Yes
 +
|near 100% working out of the box, sometimes does not completely shut down
 +
|-
 +
|P5B SE
 +
|Intel P965 + ICH8
 +
|
 +
* Install Method: Kalyway 10.5.2
 +
* BIOS Version: 0302
 +
* Audio: Onboard, AzaliaAudio.pkg only 2ch stereo is working
 +
* LAN: Onboard, Attansic L1 Ethernet
 +
* SATA & IDE: SATA works, IDE not testd, can't add another drive
 +
* Optical Drive: HP1070, work out of the box. Originally tried to install with an old ide dvd drive. had to use a SATA
 +
* shutdown does not shutdown completely. restart works, sleep not tested
 +
* firewire pci card works out of the box
 +
|BOOT.EFI.V80
 
|
 
|
* Install Method: Retail disc image from separate installation, update to 10.5.2 via [http://forum.insanelymac.com/index.php?showtopic=87078 this guide].  remove: AppleIntelCPUPowerManagement, AppleEFIRuntime. add: dsmos, ALCInject, Jmicron (optional). replace: AppleHDA, IONetworkingFamily, AppleSMBIOS. [http://mckill.ca/p5w-dh_sound_net_leopard.zip kexts here]
 
* BIOS Version: 2004 ; Revision: unknown
 
* Audio: Realtek 882
 
* LAN: Marvell Yukon 88E8053
 
* SATA & IDE: SATA works out box, jmicron controller works with patch.
 
|PC_EFI and Vanilla Kernel work fine
 
|BIOS setup options:
 
- Execute disable function -> enabled
 
- Max CPUID -> enabled
 
- HPet -> enabled
 
- Memory remap feature -> enabled
 
- Microcode update -> enabled
 
- Acpi 2 support -> Yes
 
- Acpi -> Enabled
 
|- < Make sure this is at the beginning and end of your system, no need for two, just one
 
 
 
|-
 
|-
|P5B Deluxe (NO WiFi)
+
|P5B Deluxe
|Intel P965 / ICH8R  
+
|Intel P965 + ICH8R  
 
|
 
|
 
* Install Method: Kalyway 10.5.1, Upgrade: Kalyway_Hack_10.5.2ComboUpdate
 
* Install Method: Kalyway 10.5.1, Upgrade: Kalyway_Hack_10.5.2ComboUpdate
 
* ComboUpdate method, be prepared for several lengthy reboots. Relax & just let it run.
 
* ComboUpdate method, be prepared for several lengthy reboots. Relax & just let it run.
* P5B Deluxe BIOS Ver.1226 (latest available from [http://support.asus.com/download/ ASUS])
+
* P5B Deluxe BIOS Ver.1226
 
* Audio: AD1988B 8-channel High Definition Audio still not working after update (patches not tested)
 
* Audio: AD1988B 8-channel High Definition Audio still not working after update (patches not tested)
 
* JMicron JMB363 SATA / PATA controller NOT TESTED (2 x External SATA 3.0 Gb/s ports)
 
* JMicron JMB363 SATA / PATA controller NOT TESTED (2 x External SATA 3.0 Gb/s ports)
Line 625: Line 972:
 
|-
 
|-
 
|P5B-E Plus
 
|P5B-E Plus
|Intel P965 / ICH8R  
+
|Intel P965 + ICH8R  
 
|
 
|
 
* Install Method: Kalyway 10.5.2
 
* Install Method: Kalyway 10.5.2
Line 641: Line 988:
 
| MBR + EFI + Vanilla Kernel, GUID + Kabyl
 
| MBR + EFI + Vanilla Kernel, GUID + Kabyl
 
| Not quite, but close; Onboard 7.1 Audio only in stereo
 
| Not quite, but close; Onboard 7.1 Audio only in stereo
 +
|-
 +
|P5B PLUS
 +
|Intel P965 + ICH8
 +
|
 +
* Install method: Kalyway 1.5.1 + Kalyway Combo update
 +
* Onboard audio: Working (With Kalyway audio patch)
 +
* Onboard LAN: not Working
 +
* Sata: full working
 +
* IDE: Works after Install. For boot Sata drive needed.
 +
* Video: Working with Kalyway Nvinject.
 +
|EFI v8 working. Vanilla 9.2.0 working.
 +
|Audio needs Azalia patch
 +
|-
 +
|P5GC-MX
 +
|Intel P965 + ICH8
 +
|
 +
* HD fresh install with GUID using Disc Utility
 +
* iATKOS v1.0i SSE3 with vanilla kernel 10.5.1
 +
* Used PC_EFIv8 for GUID booting
 +
* Updated to 10.5.2 using the original Apple combo update but using Devil's procedure on insanelymac
 +
* Onboard LAN work with driver, download the driver  [http://www.4shared.com/file/93302364/b1e420/AttansicL2Ethernet090219kext.html here]
 +
* Audio works with HDAPatcher ALC883.
 +
|YES
 +
|Audio needs patching, and need a LAN driver .
 
|-
 
|-
 
|P5B
 
|P5B
|Intel P965
+
|Intel P965 + ICH8
 
|
 
|
 
* Install Method: Kalyway 10.5.1, ComboUpdate + Kernel Patches applied in 10.5.1 or "Onetracks perfect install" works with ToH RC2 which is a lot of work
 
* Install Method: Kalyway 10.5.1, ComboUpdate + Kernel Patches applied in 10.5.1 or "Onetracks perfect install" works with ToH RC2 which is a lot of work
Line 658: Line 1,029:
 
|No, Patches applied in 10.5.1
 
|No, Patches applied in 10.5.1
 
|-
 
|-
|P5B
+
|P5KPL-AM
|Intel P965
+
|Intel G31 ICH7
 
|
 
|
* Install Method: iAtkos 1.0ir2, no luck with Kalyway
+
* Install Method: iAKTOs_5i
* BIOS Version: 1202, had to downgrade using CrashFree BIOS
+
* Audio: works OOB
* Bios options: Max CPUID disabled, Memory remap enabled, Execution bit enabled
+
* Realtek RTL8102EL 100/10 LAN : need driver [http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTypeID=3&GetDown=false#7 here]
* Audio: works OTB
+
* SATA, PATA both works
* LAN: works OTB
+
* USB: all working
* SATA & IDE: Used SATA HDD + SATA Optical, enabled AHCI, disabled JMicron IDE
+
* Everything work great after 10.5.6 apple update through "software update" no need change or modify anything LIKE A REAL MAC
* Partitioned with MBR with Darwin bootloader (EFI failed)
+
|EFI working, Vanilla works
* Non-vanilla kernel 9.2 (ToH) after Kalyway's ComboUpdate to 10.5.2
+
|Yes. need LAN driver.
* Reboot and shutdown are buggy, have to boot sometimes with: "-v -x -legacy" after bad shutdown/reboot.
+
|MBR + Non-vanilla kernel
+
|Yes, no patches required
+
 
|-
 
|-
|P5B
+
|P5KPL-AM
|Intel P965
+
|Intel G31 ICH7
 
|
 
|
* Install Method: iAtkos 1.0ir2
+
* Install Method: Kalyway 10.5.2
* BIOS Version: 1803
+
* Audio: works OOB, only stereo, no mic support.
* Bios options: Max CPUID disabled, Memory remap enabled, Execution bit enabled
+
* Realtek works OOB
* Audio: works OTB
+
* SATA, PATA works OOB
* LAN: works OTB
+
* USB: all ports working OOB
* DVD: Installed with USB2 Adapter for DVD-ROM, after install put back on IDE
+
* Video: works OOB (no CI and no QE)
* HDD: 320 Sata HDD for Vista and Ubuntu, 100 Pata with Vantec Sata converter for OSX, enabled AHCI
+
* Sleep, restart, shutdown: Working
* Partitioned with MBR, used GRUB to load PC_EFI in Ubuntu
+
* Firewire: not tested
* Vanilla kernel with 10.5.2 and all updates
+
|EFI working, Vanilla works
* Front USB (PCI Device ID in Sys Prof: 0x2833) not working / is missing - [http://forum.insanelymac.com/index.php?showtopic=94646 Solution]
+
|Yes, everything OOB.
|MBR and EFI + Vanilla kernel
+
|Yes, no patches required
+
 
|-
 
|-
|P5B PLUS
+
|P5KPL-VM
|Intel P965 + ICH8 Chipset
+
|Intel G31 + ICH7
 
|
 
|
* Install method: Kalyway 1.5.1 + Kalyway Combo update
+
* Install Method: Kalyway 10.5.1, Combo Updater, Netkas method
* Onboard audio: Working (With Kalyway audio patch)
+
* Bios release: 303
* Onboard LAN: not Working
+
* Audio work
* Sata: full working
+
* LAN Attansic/Atheros L1 work with [http://forum.insanelymac.com/index.php?showtopic=40851&st=300&gopid=707720&# DaemonES/MadInt driver]
* IDE: Works after Install. For boot Sata drive needed.
+
* GMA3100 Onboard Video: doesn't work
* Video: Working with Kalyway Nvinject.
+
* System Profiler unstable (Need patch from 10.4.10)
|EFI v8 working. Vanilla 9.2.0 working.
+
|PC_EFI_V8 + Grub, Vanilla Kernel
|Audio needs Azalia patch
+
|No
 
|-
 
|-
|Asus P5GC-MX
+
|P5KPL-CM
|Intel P965 + ICH8 Chipset
+
|Intel G31 + ICH7
 
|
 
|
* HD fresh install with GUID using Disc Utility
+
* Install Method: Kalyway 10.5.2 (boot with -x)
* iATKOS v1.0i SSE3 with vanilla kernel 10.5.1
+
* Bios release: ???
* Used PC_EFIv8 for GUID booting
+
* PS/2 - working with most recent fix
* Updated to 10.5.2 using the original Apple combo update but using Devil's procedure on insanelymac
+
* SATA - working perfectly, 4 channels
* Onboard LAN doesn't work
+
* PATA - working perrfectly, both channels
* Audio works with HDAPatcher ALC883.
+
* Audio - Stereo Out only with AppleAzalia (patched)
|YES
+
* LAN - Atheros not working - using PCI 8139D (no drivers)
|Audio needs patching
+
* GMA3100 Onboard Video: doesn't work
 +
* System Profiler working perfectly - all values correct
 +
* Sleep/Hibernate - never works - fan always on
 +
|PC_EFI_V8
 +
|No
 
|-
 
|-
 
|P5WD2 Premium
 
|P5WD2 Premium
|i955X ICH7R
+
|Intel 955X + ICH7R
 
|
 
|
 
* Install Method: ToH 10.5 > Apple combo 10.5.1 + ToH 10.5.1 kernel > Apple combo 10.5.2 via  [http://forum.insanelymac.com/index.php?showtopic=87078 this guide] + ToH 10.5.2 kernel
 
* Install Method: ToH 10.5 > Apple combo 10.5.1 + ToH 10.5.1 kernel > Apple combo 10.5.2 via  [http://forum.insanelymac.com/index.php?showtopic=87078 this guide] + ToH 10.5.2 kernel
Line 726: Line 1,096:
 
|EFI v8 works
 
|EFI v8 works
 
|Audio needs patching
 
|Audio needs patching
 +
|-
 +
|P5WD2 Premium
 +
|Intel 955X + ICH7R
 +
|
 +
* Install Method: Kalyway_10.5.2_DVD_Intel_AMD; kernel_9.2_speedstep; NVinject-256.
 +
* Audio: Realtek ALC882  Disabled in BIOS during install, but installed drivers anyway.  When system working well, enabled HD audio in BIOS, and it worked.  I call that working OTB
 +
* LAN: Intel PCIe Gigabit LAN Controller - works OTB; Marvell 88E8001 Gigabit LAN Controller disabled and not tested
 +
* FireWire: works OTB
 +
* IDE: disabled and not tested
 +
* SATA: works OTB; Silicon Image 3132 SATA controller - disabled and not tested
 +
|EFI v8 works.  Vanilla Kernel will NOT work. 
 +
|Yes, so far
 
|-
 
|-
 
|P5B-MX
 
|P5B-MX
|Intel 946GZ
+
|Intel 946GZ + ICH7
 
|
 
|
 
* Install Method: Kalyway 10.5.2
 
* Install Method: Kalyway 10.5.2
* BIOS Version:; Revision:
+
* BIOS Version: 0605; Revision:
* Audio: Audio works with AZALIA
+
* Audio: Audio works with AZALIA by [http://forum.insanelymac.com/index.php?showtopic=36520 skippyretard]
* LAN: Not tested
+
* Onboard video: Not working (causes kernel panic).
* SATA & IDE: IDE works, SATA not tested
+
* LAN: Works with Attansic driver by [http://forum.insanelymac.com/index.php?showtopic=40851&st=421# DaemonES & MadInt]
 +
* SATA & IDE: Both working
 
* Requires MBR
 
* Requires MBR
 
|EFI & Vanilla Kernel
 
|EFI & Vanilla Kernel
|Audio needs patching
+
|Audio and network needs patching, and onboard video panics system.
 
|-
 
|-
|Asus P5GC-MX/1333
+
|P5GC-MX/1333
|Intel 945GC Express Chipset
+
|Intel 945GC + ICH7
 
|
 
|
* Upgraded from Kalyway 10.5.1 to 10.5.2 using /"kalyway_hack_10.5.2ComboUpdate/"
+
* Install Method 1: Upgraded from Kalyway 10.5.1 to 10.5.2 using /"kalyway_hack_10.5.2ComboUpdate/";
* Onboard LAN doesn't work
+
*Install Method 2:  10.5.1 retail DVD install with assistance of Boot132 CD (by Kalyway) and then Kalyway 10.5.2 updater
*PS2 mouse an Keyboard: works out of the box
+
* Onboard LAN: Works with the driver, available for download [http://www.4shared.com/file/93302364/b1e420/AttansicL2Ethernet090219kext.html here].
*SATA: works out of the box
+
*PS2 mouse an Keyboard: works out of the box.
*IDE: works out of the box
+
*SATA: works out of the box.
*onboard USB works out of the box
+
*IDE: works out of the box.
*Power off, sleep: work
+
*onboard USB works out of the box.
 +
*Power off, sleep: work with proper USB and monitor pin configurations
 
* Audio works with HDAPatcher ALC883.
 
* Audio works with HDAPatcher ALC883.
 +
*Onboard Video: works at 1024x768 default (but needs patching to get better resolution)
 
|YES
 
|YES
|Audio needs patching
+
|Audio needs patching, onboard video needs patching, and LAN needs a driver.
 
|-
 
|-
 
|P5LD2-VM DH
 
|P5LD2-VM DH
|Intel 945G and ICH7
+
|Intel 945G + ICH7
 
|
 
|
 
*Install Method: Leopard retail DVD using BrazilMac's way, normal Autoupdates, manual Update to 10.5.2 ([http://netkas.org/?p=50 Netkas' HowTo here])
 
*Install Method: Leopard retail DVD using BrazilMac's way, normal Autoupdates, manual Update to 10.5.2 ([http://netkas.org/?p=50 Netkas' HowTo here])
Line 769: Line 1,154:
 
|-
 
|-
 
|P5LD2-VM SE
 
|P5LD2-VM SE
|Intel® 945G / ICH7
+
|Intel® 945G + ICH7
 
|
 
|
 
*Install Method: Retail DVD & web update to 10.5.2(Netkas Method)
 
*Install Method: Retail DVD & web update to 10.5.2(Netkas Method)
Line 779: Line 1,164:
 
|Audio needs Patching, and couple of kext removed/replaced.
 
|Audio needs Patching, and couple of kext removed/replaced.
 
|-
 
|-
|P2AD2-E Premium
+
|P5AD2-E Premium
 
|Intel 925XE
 
|Intel 925XE
 
|
 
|
Line 800: Line 1,185:
 
|No, LAN and Audio Output need patching
 
|No, LAN and Audio Output need patching
 
|-
 
|-
|Asus A8N-E
+
|P5P800
|NFORCE4
+
|865PE
 
|
 
|
* Install Method: Leopard 10.5.2 Zephyroth AMD
+
* Install Method: Kalyway 10.5.2 DVD
* BIOS Version: Unknown; Revision: Unknown
+
* BIOS Version:; Revision:
* Audio: Install AC97 package on the install menu
+
* Audio: Works
* LAN: Install Forcedeth from the install menu
+
* LAN: Works, no jumbo frames
* SATA & IDE: IDE works; SATA not tested
+
* SATA & IDE: SATA unknown, IDE works
* Install Boot Hang Fix:
+
* Optical Drive: LG DVD_RW, works
*# Boot with the DVD
+
* Shutdown & Reboot works, Sleep works, but sometimes fail
*# Press F8, then type "-s"
+
|No
*# Type "cd /usr/standalone/i386"
+
|With appropriate drivers selected @ installation, the only patch you should find is kalyway 10-5-2 usb patch.
*# Type "dd if=./guid/boot1h of=/dev/rdiskXsY bs=512 count=1" (X is the disk number and Y is the partition number on which you installed Leo)
+
|-
*# Type "dd if=./guid/boot0 of=/dev/diskX bs=400 count=1"
+
|P4PE-X/TE
*# Type "./startupfiletool -v /dev/diskXsY ./boot_v8"
+
|845PE
|EFI v8 Works
+
|
|Audio & LAN need patching
+
* Installed using JaS 10.5.4 Client/Server
 +
* Audio: Editing proper kext did not help no sound ADI1888
 +
* Ethernet: works with Installed Patch
 +
* USB & ATA work using Patches from JaS DVD
 +
|Using Cemeleon EFI, Using 9.2.0 ToH kernel (SSE2)
 +
|No
 +
|-
 +
|Striker II Formula
 +
|NVIDIA nForce 780i SLI
 +
|
 +
* Install Method: Kalyway 10.5.2
 +
* Bios Version: 1303 (2008/05/16)
 +
*Audio: [http://wiki.taruga.net/tiki-index.php 2 Speaker,Digital Out and Mic Works ] (AD1988b_rev3_Installer)
 +
*Lan: not working
 +
*SATA & IDE: works
 +
*FireWire: works
 +
|EFI v8 Works  
 +
| No, overall system is too unstable
 
|-  
 
|-  
|A8N-SLI
+
|Striker Extreme
|NVIDIA nForce4 SLI
+
|NVIDIA nForce 680i SLI
 
|
 
|
* Install Method: Zephyroth 10.5.2
+
* Install Method: Kalyway Update combo 10.5.2 + 10.5.2 SSE3 kernel update to fix boot delay and black screen, efi MBR
* BIOS Version: 1604; Revision: Beta
+
* BIOS Version:1401
* Audio: Realtek ALC850 (Selected AC'97 from Customize list)
+
* Audio: SoundMax AD 1988B, working stereo only, no input with AzaliaAudio.pkg installer
* LAN: nForce4 built-in Gbit MAC (Selected forcedeth from Customize list)
+
* LAN: Marvell Yukon 88E8039, working with nforcedeath, both nics, all CPUs enabled, unstable under load
* SATA & IDE: Installed OS onto IDE drive without problems. Also have two SATA drives in Striped RAID configured through MediaShield ROM, but the RAID showed up as two individual drives in Mac's Disk Utility during installation. Cannot access RAID even after installation.
+
* SATA & IDE: Does SATA work? Both working flawlessly out of the box (10.5.1 and 10.5.2)
* Optical Drive: BenQ DW1625. During the 15 odd times I booted from the DVD to install, after the first 6 or 7 times, the installer started saying that it could not read from the disc. This was happening when it normally would check the media for errors. So, I re-burned a new disc using the same drive of the same ISO(which I had initially created from the original (now problematic) disk). The new disc worked. Maybe, just a very fragile disc. But, weird.
+
* Optical Drive: Both IDE and SATA drives working. Both optical drives LiteOn models DVD burners
* Shutdown and reboot works. Sleep gives a blank (black), unresponsive screen. Have to hard reset.
+
* Shutdown, reboot work flawlessly, sleep hangs computer after update to 10.5.2
* Had to run the installation, with the same options, multiple times for it to get it right. After a few installs, I was getting the gray screen asking me to restart the computer. I really don't know how I got around that problem. I just installed again without changing any options. Finally, when it worked, I had my ethernet cable unplugged. In the Customize list, I had chosen the nforce chipset 2/3/4/5 kext, AC '97, forcedeth, nvidia geforce 10.5.2 and nvinject 128 MB for my 6600GT graphics card. Name of volume: Leopard. I chose the EFI v8 plus MBR bootloader to make the "Leopard" volume bootable. I'm using grub to choose between my various OSes. SSE3 9.2.0 TOH Kernel chosen from the Customize list.
+
* Video card GeForce 7600GT working Quartz Extreme with latest nvinject 0.2.1 had to edit NVDAResman.kext,NVDANV40.HAL,NVDANV30.HAL with device specific ID and remove all other device ID's
* Can only install from same IDE cable (CD and HDD)
+
|Not tested
|EFI: Since I installed using Zephyroth's 10.5.2, I'm assuming it installs EFI by default?
+
|LAN and Audio
|Yes, everything works without patching. No flags needed while booting.
+
 
|-
 
|-
|A8N-VM
+
|P5N32-E SLI Plus
|nForce 410
+
|NVidia nForce 680i SLI
 
|
 
|
* Install Method: Zephyroth Leopard 10.5.2 for AMD
+
* Install Method: [http://forum.insanelymac.com/index.php?showtopic=87901 Kalyway 10.5.2] and [http://forum.insanelymac.com/index.php?showtopic=109102&mode=linear 10.5.3 Combo Update Package by Mysticus v1.3]
* BIOS Version: 0902; Revision: Unknown
+
* CPU: Core 2 Quad Q6600 had to edit about this mac strings file to show that in the about this mac window
* Audio: ADI AD1986A works with ALC888 patch and no input
+
* Audio: Worked for me OOB, with Kalyway 10.5.2 install disk (on the default driver install setup).
* LAN: Works with Zephyroth patch in installation
+
* LAN: Onboard LAN requires installation of the forcedeth driver
* SATA & IDE: Works with Zephyroth patch in installation
+
**still doesn't work though, shows as always being unplugged
* partitioned as MBR
+
**used a D-Link DFE-530TX+ PCI Adapter and that worked fine
|EFI works
+
* SATA: SATA works alright out of the box (as long as you don't enable SATA RAID) but freezes sometimes
|Audio & LAN need patching
+
**suspects it's because the nforce drivers are still buggy
 +
**UPDATE: if your system has more than 3 GB of RAM, see if booting with the kernel param 'maxmem=3072' fixes the problem.  [Using Kalyway 10.5.2, at least, it fixed the problem on at least one system.  Perhaps the SATA driver only uses 32-bit addressing for DMA???]
 +
* IDE: works
 +
* USB 1 and 2: works but not able to mount usb drives until after you install the 10.5.3 combo update, don't select PCUSBGen fix, not needed
 +
* USB Booting: not sure
 +
* Optical Drive: SATA and USB Optical Drives are supported after 10.5.3 combo update installed
 +
* Graphics:
 +
* Nvidia 8600GTS 256 MB with nvinject 256 option selected with full Quarts Extreme and Core Image support (QE/CI)
 +
* Nvidia 8800GT 512MB; works with full support with Nvinject 512, with dual monitors.
 +
|No: select nforce kernel 9.2.0 following guide posted with efi enabled and when using combo update of 10.5.3
 +
|No
 +
|}
 +
'''AMD CPU'''
 +
{|-| class="wikitable" width="100%"
 +
|-
 +
|M3A78-T
 +
|AMD 790GX+SB750
 +
|
 +
* Install Method: iDeneb 10.5.5
 +
* BIOS setup options: Enabled AHCI
 +
* BIOS Version: 602
 +
* Audio: Works , Realtek ALC1200 (AppleAzaliaAudio) WORK PERFECT FOR ME. 
 +
But if you have problems you can use this Kext [http://forum.insanelymac.com/index.php?act=attach&type=post&id=37201]
 +
* Network: Onboard Marvell 88E8056 Gigabite LAN. Working Perfect
 +
* SATA HD and DVD ROM: Work Perfect
 +
* USB: all working
 +
* Firewire: Not Tested
 +
 
 +
|EFI v8 Works
 +
|Audio and LAN Working Perfect'''
 +
|-
 +
|M3N-HD/HDMI
 +
|Nvidia nForce 750a SLI
 +
|
 +
* Install Method: Kalyway 10.5.2
 +
* BIOS setup options: Enabled AHCI
 +
* BIOS Version: 1301
 +
* Audio: Works , Realtek ALC1200 (AppleAzaliaAudio) use this Kext [http://forum.insanelymac.com/index.php?act=attach&type=post&id=37201]
 +
* Network: Onboard Atheros F1 Phy Gigabit (Not Tested) Belkin G Plus MIMO USB Network Adapter (RUN PERFECT)
 +
* SATA & IDE: Work Perfect
 +
* USB: all working
 +
* Firewire: Not Tested
 +
 
 +
|EFI v8 Works
 +
|LAN no tested but Belkin G Plus MIMO USB Network Adapter Run Perfect, Audio Works , Realtek ALC1200 (AppleAzaliaAudio device id modificate)'''
 
|-
 
|-
 
|Crosshair AM2
 
|Crosshair AM2
|nVidia nFocre 590 SLI MCP55
+
|NVIDIA nFocre 590 SLI MCP55
 
|
 
|
 
* Install Method: Zephroth AMD SSE3 9.2.0 Kernel
 
* Install Method: Zephroth AMD SSE3 9.2.0 Kernel
Line 857: Line 1,302:
 
|EFI v8 Works
 
|EFI v8 Works
 
|LAN doesn't work, Audio needs patching (reinstall AzailiaHD after 1st boot)
 
|LAN doesn't work, Audio needs patching (reinstall AzailiaHD after 1st boot)
|-
 
 
|M2N-E SLI
 
|nForce 500 MCP
 
|
 
* Install Method: Zephyroth 10.5.2 AMD SSE3 9.2.0 Kernel
 
* BIOS Version: 0902; Revision: Unknown
 
* Audio: C-Media 6501 HD Audio Device; works out of the box, recognised as USB Audio Device
 
* LAN: Works with nForce 2/3/4/5 drivers selected in install options.
 
* SATA & IDE: SATA works (can do flat install to SATA HDD); IDE Works
 
| EFI v8 Works
 
| No, lan needs patching
 
 
|-
 
|-
 
|M2N-E
 
|M2N-E
|nForce 570 Ultra MCP
+
|NVIDIA nForce 570 Ultra MCP
 
|
 
|
 
* Install Method: LEO4ALL v3 10.5.2 AMD SSE3 9.2.2 Kernel .
 
* Install Method: LEO4ALL v3 10.5.2 AMD SSE3 9.2.2 Kernel .
Line 881: Line 1,314:
 
| No, audio,sata needs patching,slow boot (aprox. 3-4 minutes) .
 
| No, audio,sata needs patching,slow boot (aprox. 3-4 minutes) .
 
|-
 
|-
|M2N32-SLI Deluxe
+
|M2N-X
|Nforce 590 SLI MCP
+
|NVIDIA nForce 520 MCP
 
|
 
|
* Install Method: Leo4All-10.5.2 PPFv1 Universal AMD/INTELSSE2/SSE3 9.2.0 Kernel
+
* Install Method: Kalyway 10.5.2 AMD SSE3 Sleepykernel .
* BIOS Version: 1802; Revision: Unknown
+
* BIOS Version: 0701; Revision: Unknown.
* Audio: ADI AD1988B SoundMAX, Azaila Driver From DVD
+
* Audio: MCP65 HDA, line out works perfectly with AppleHDA removed and device/vendor IDS added to AzaliaAudo kext
* LAN: Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0e (Integrated), RTL8187 Driver From DVD
+
* LAN: Not tested.
* SATA & IDE: It Will Install On IDE or SATA
+
* SATA & IDE: SATA works with Nforce MeDevil driver from dvd; IDE works perfectly.
* Optical Drive: SATA LG DVD Burner | Had to hook up IDE DVD-Rom to install (removed IDE Rom after install and everything works fine)
+
| EFI Worked.
* AMD-Patch From DVD
+
| No, audio,sata and AMD patch 1 used, but all required patches apart from audio already on disk.
|EFI Worked  
+
|The integrated LAN does not work out of the box.  (Did not try to fix this, because on board wireless worked with patches applied during install.  No post-install patches applied.
+
 
|-
 
|-
 
 
|M2N32-SLI Deluxe
 
|M2N32-SLI Deluxe
 
|Nforce 590 SLI MCP
 
|Nforce 590 SLI MCP
Line 907: Line 1,337:
 
|EFI Worked  
 
|EFI Worked  
 
|The integrated LAN does not work out of the box.  (Did not try to fix this, because on board wireless worked with patches applied during install.  No post-install patches applied.
 
|The integrated LAN does not work out of the box.  (Did not try to fix this, because on board wireless worked with patches applied during install.  No post-install patches applied.
 +
|-
 +
|M2N-E SLI
 +
|NVIDIA nForce 500 SLI MCP
 +
|
 +
* Install Method: Zephyroth 10.5.2 AMD SSE3 9.2.0 Kernel
 +
* BIOS Version: 0902; Revision: Unknown
 +
* Audio: C-Media 6501 HD Audio Device; works out of the box, recognised as USB Audio Device
 +
* LAN: Works with nForce 2/3/4/5 drivers selected in install options.
 +
* SATA & IDE: SATA works (can do flat install to SATA HDD); IDE Works
 +
| EFI v8 Works
 +
| No, lan needs patching
 +
|-
 +
|M2N SLI Deluxe
 +
|NVIDIA nForce 570 SLI MCP
 +
|
 +
* Install Method: Kalyway 10.5.2 AMD
 +
* BIOS Version: 1604; Revision: Unknown
 +
* Audio: SoundMAX ADI AD1988B; Stereo works have not tested surround, Not recognized
 +
* LAN: Nvidia nForce 570 MCP built in dual Gigabit with Marvell PHY works with (nForceLAN.kext)
 +
* SATA & IDE: SATA works (can do flat install to SATA HDD); IDE Works
 +
* Despite being able to setup RAID before OS even starts up. It does not recognize the array.
 +
| EFI v8 Works
 +
| Video (PNY 7600GT 256mb) worked but for full support I had to download and install NVinject despite it being installed from DVD.
 +
|-
 +
|M2N-X Plus
 +
|NVIDIA nForce 430
 +
|
 +
* Install Method: Leo4Allv3 10.5.2 Universal SSE2 SSE3
 +
* BIOS Version: Stock
 +
* Audio: High Definition Audio Azalia (Installed Azalia Driver)
 +
* LAN: Not tested.
 +
* SATA & IDE: SATA Working fine without other packages. Not tested PATA.
 +
* Optical Drive: LG H50N. Working w/o other packages
 +
* Shutdown and restart worked, sleep not tested
 +
* Was looping on the welcome screen (When comes after the backup screen, back to the welcome video). Resolved Typing -s at the Darwin boot prompt and following:
 +
# $/sbin/mount -uw /
 +
# $passwd root
 +
# it will ask you to enter a new password
 +
# $touch /var/db/.AppleSetupDone
 +
# $reboot
 +
|EFI ran smooth, Installed 9.2.2 Kernel in a Seagate 160Gb SATA HDD Using MBR to Boot (As default)
 +
|Yes, but LAN (not tested yet)
 +
|-
 +
|A8N-SLI
 +
|NVIDIA nForce4 SLI
 +
|
 +
* Install Method: Zephyroth 10.5.2
 +
* BIOS Version: 1604; Revision: Beta
 +
* Audio: Realtek ALC850 (Selected AC'97 from Customize list)
 +
* LAN: nForce4 built-in Gbit MAC (Selected forcedeth from Customize list)
 +
* SATA & IDE: Installed OS onto IDE drive without problems. Also have two SATA drives in Striped RAID configured through MediaShield ROM, but the RAID showed up as two individual drives in Mac's Disk Utility during installation. Cannot access RAID even after installation.
 +
* Optical Drive: BenQ DW1625. During the 15 odd times I booted from the DVD to install, after the first 6 or 7 times, the installer started saying that it could not read from the disc. This was happening when it normally would check the media for errors. So, I re-burned a new disc using the same drive of the same ISO(which I had initially created from the original (now problematic) disk). The new disc worked. Maybe, just a very fragile disc. But, weird.
 +
* Shutdown and reboot works. Sleep gives a blank (black), unresponsive screen. Have to hard reset.
 +
* Had to run the installation, with the same options, multiple times for it to get it right. After a few installs, I was getting the gray screen asking me to restart the computer. I really don't know how I got around that problem. I just installed again without changing any options. Finally, when it worked, I had my ethernet cable unplugged. In the Customize list, I had chosen the nforce chipset 2/3/4/5 kext, AC '97, forcedeth, nvidia geforce 10.5.2 and nvinject 128 MB for my 6600GT graphics card. Name of volume: Leopard. I chose the EFI v8 plus MBR bootloader to make the "Leopard" volume bootable. I'm using grub to choose between my various OSes. '''SSE3 9.2.0 TOH Kernel chosen from the Customize list.
 +
* Can only install from same IDE cable (CD and HDD)
 +
|EFI: Since I installed using Zephyroth's 10.5.2, I'm assuming it installs EFI by default?
 +
|Yes, everything works without patching. No flags needed while booting.
 +
|-
 +
|A8N-E
 +
|nForce 4
 +
|
 +
* Install Method: Leopard 10.5.2 Zephyroth AMD
 +
* BIOS Version: Unknown; Revision: Unknown
 +
* Audio: Install AC97 package on the install menu
 +
* LAN: Install Forcedeth from the install menu
 +
* SATA & IDE: IDE works; SATA not tested
 +
* Install Boot Hang Fix:
 +
*# Boot with the DVD
 +
*# Press F8, then type "-s"
 +
*# Type "cd /usr/standalone/i386"
 +
*# Type "dd if=./guid/boot1h of=/dev/rdiskXsY bs=512 count=1" (X is the disk number and Y is the partition number on which you installed Leo)
 +
*# Type "dd if=./guid/boot0 of=/dev/diskX bs=400 count=1"
 +
*# Type "./startupfiletool -v /dev/diskXsY ./boot_v8"
 +
|EFI v8 Works
 +
|Audio & LAN need patching
 +
|-
 +
|A8N5X
 +
|NVIDIA nForce4
 +
|
 +
* Install Method: Kalway 10.5.2
 +
* BIOS Version: 0902
 +
* Nvidia 6600 PCIe working with NVinject
 +
* Chose patches: SSE2_Jas1048_ACPI_APIC, AMD_1052_Patch_test_1, and -legacy flag
 +
* Startup welcome movie played with sound on first boot
 +
|EFI working
 +
|Everything but LAN is working
 +
|-
 +
|A8N-VM
 +
|NVIDIA nForce 410
 +
|
 +
* Install Method: Zephyroth Leopard 10.5.2 for AMD
 +
* BIOS Version: 0902; Revision: Unknown
 +
* Audio: ADI AD1986A works with ALC888 patch and no input
 +
* LAN: Works with Zephyroth patch in installation
 +
* SATA & IDE: Works with Zephyroth patch in installation
 +
* partitioned as MBR
 +
|EFI works
 +
|Audio & LAN need patching
 
|-
 
|-
 
|M2NPV-VM
 
|M2NPV-VM
Line 921: Line 1,449:
 
|Everything working fine but no qe/ci
 
|Everything working fine but no qe/ci
 
|-
 
|-
|Striker Extreme
+
|P5V-VM Ultra
|NVIDIA NForce 680i SLI
+
|VIA P4M890
 
|
 
|
* Install Method: Kalyway Update combo 10.5.2 + 10.5.2 SSE3 kernel update to fix boot delay and black screen, efi MBR
+
* Install Method: Kalyway 10.5.1, Combo Updater, & Kernel Patch
* BIOS Version:1401
+
* BIOS Version: Unknown; Revision: Unknown
* Audio: SoundMax AD 1988B, working stereo only, no input with AzaliaAudio.pkg installer
+
* Audio: Realtek High Definition Audio, ADI AD1986A Soundmax Codec
* LAN: Marvell Yukon 88E8039, working with nforcedeath, both nics, all CPUs enabled, unstable under load
+
* LAN: Realtek RTL8201CL
* SATA & IDE: Does SATA work? Both working flawlessly out of the box (10.5.1 and 10.5.2)
+
* SATA & IDE: Unknown
* Optical Drive: Both IDE and SATA drives working. Both optical drives LiteOn models DVD burners
+
|Unknown
* Shutdown, reboot work flawlessly, sleep hangs computer after update to 10.5.2
+
|Audio needs patching
* Video card GeForce 7600GT working Quartz Extreme with latest nvinject 0.2.1 had to edit NVDAResman.kext,NVDANV40.HAL,NVDANV30.HAL with device specific ID and remove all other device ID's
+
|Not tested
+
|LAN and Audio
+
 
|-
 
|-
|P5SD2-FM
+
|P5VD2-MX
|SiS 649DX/SiS 966 chipset
+
|VIA P4M890
 
|
 
|
* Install Method: Flat Image, ToH Kernel, Kalyway 10.5.2 Combo Update
+
* Install Method: Kalyway 10.5.1, Combo Updater, & Kernel Patch
* BIOS Version:; Revision:
+
* BIOS Version: 1017; Revision: Unknown
* Audio: Works
+
* Audio: ADI1986A; works with Azalia
* LAN: Works
+
* LAN: Realtek RTL8201CL; works with viarhine.kext
* SATA & IDE: SATA unknown, IDE works
+
* SATA & IDE: IDE works; SATA needs patching to appleviaata.kext and add 0x53371106 0x2363197B to the device ID
* Optical Drive: NEC DVD_RW ND-4551A works
+
* Shutdown & Restart fully working, Sleep not tested
* Shutdown & Reboot works, Sleep not tested
+
 
|Unknown
 
|Unknown
|Yes
+
|No, audio & lan need patching
 +
|-
 +
|K8V SE Deluxe
 +
|VIA K8T800 (VT8237)
 +
|
 +
* Install Method: Kalyway 10.5.2 (-x -v -legacy options)
 +
* BIOS Version: 1001 ; Revision: Unknown
 +
* Audio: ADI AD1980 SoundMAX (integrated) - does not work, used drivers for PCI Creative card
 +
* LAN: Marvell Yukon 8E8001 (integrated) - works with m.musashi beta driver
 +
* SATA & PATA: Works out of the box
 +
* Optical: Rosewill 16X8 DVD DUAL working, Lite-On LTR-52327S CD-RW working
 +
* Shutdown and reboot work, sleep unknown
 +
* USB: Seen in system profiler, will not mount devices
 +
|Unknown
 +
|No, Audio, LAN, and USB need patching.
 
|-
 
|-
 
|K8V-X
 
|K8V-X
Line 978: Line 1,516:
 
|Audio & LAN need patching
 
|Audio & LAN need patching
 
|-
 
|-
|P5V-VM Ultra
+
|M2A-VM
|VIA P4M890
+
|VIA SB600 / ATi 690g
|
+
* Install Method: Kalyway 10.5.1, Combo Updater, & Kernel Patch
+
* BIOS Version: Unknown; Revision: Unknown
+
* Audio: Realtek High Definition Audio, ADI AD1986A Soundmax Codec
+
* LAN: Realtek RTL8201CL
+
* SATA & IDE: Unknown
+
|Unknown
+
|Audio needs patching
+
|-
+
|P5VD2-MX
+
|VIA P4M890
+
|
+
* Install Method: Kalyway 10.5.1, Combo Updater, & Kernel Patch
+
* BIOS Version: 1017; Revision: Unknown
+
* Audio: ADI1986A; works with Azalia
+
* LAN: Realtek RTL8201CL; works with viarhine.kext
+
* SATA & IDE: IDE works; SATA needs patching to appleviaata.kext and add 0x53371106 0x2363197B to the device ID
+
* Shutdown & Restart fully working, Sleep not tested
+
|Unknown
+
|No, audio & lan need patching
+
|-
+
|Asus M2A-VM
+
|ATi 690g/VIA SB600
+
 
|
 
|
 
* LEO4ALL V3, default kernel in DVD installer - - On AMD 4600+ x2 CPU
 
* LEO4ALL V3, default kernel in DVD installer - - On AMD 4600+ x2 CPU
 
* Motherboard BIOS version 1501
 
* Motherboard BIOS version 1501
 
* Audio, LAN, SATA 100% out of box
 
* Audio, LAN, SATA 100% out of box
 +
* SATA DVD install works out of box
 
* IDE DVD-RW (ATA) working with dcat's kext (search Insanelymac.com)
 
* IDE DVD-RW (ATA) working with dcat's kext (search Insanelymac.com)
 
* nVidia Geforce 8600 GT 256mb (works fully with NVInject 0.2.0, using [http://forum.insanelymac.com/index.php?showtopic=82080 this method]
 
* nVidia Geforce 8600 GT 256mb (works fully with NVInject 0.2.0, using [http://forum.insanelymac.com/index.php?showtopic=82080 this method]
 
* Had to switch SATA controller to AHCI in BIOS. Warning: Switch this back to IDE if you installed Windows XP on another drive.
 
* Had to switch SATA controller to AHCI in BIOS. Warning: Switch this back to IDE if you installed Windows XP on another drive.
 +
* If you use PS/2 Keyboard and Mouse (instead of USB) disable USB legacy support in BIOS Setup.
 
|N/A
 
|N/A
|Everything works 100%, but I'm not using the built-in graphics card, so I'm not sure about the onboard ATi x1250 card.
+
|Everything works 100%, the onboard ATi x1250 card works with Kalyway, probably with LEO4ALL as well.
 
|-
 
|-
|Asus A8N5X
+
|M2A-VM HDMI
|NVIDIA nForce4
+
|VIA SB600 / ATI 690G
 
|
 
|
* Install Method: Kalway 10.5.2
+
* Kalyway 10.5.2, Kernels installed: sleepkernel,speedstep - - On AMD 4200+ Athlon X2 CPU
* BIOS Version: 0902
+
* Motherboard M2A-VM HDMI - No BIOS updates done
* Nvidia 6600 PCIe working with NVinject
+
* If you have old PS/2 mouse and keyboard - Disable USB Legacy support in BIOS
* Chose patches: SSE2_Jas1048_ACPI_APIC, AMD_1052_Patch_test_1, and -legacy flag
+
* LAN, SATA, IDE works 100% out of box
* Startup welcome movie played with sound on first boot
+
* IDE DVD install on a IDE primary HDD with a SATA secondary drive
|EFI working
+
* XFX nVidia Geforce 8500 GT 512mb (works like a dream with NVInject 512 selected during install)
|Everything but LAN is working
+
* Viewsonic 19' DVI - able to get full native resolution [email protected]
|} . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+
* Had to switch SATA controller to AHCI in BIOS. Warning: Switch this back to IDE if you installed Windows XP on another drive.
 +
* Install takes roughly 2 hours. Shutdown and Sleep are working.
 +
|EFI works, Vanilla not supported
 +
|Near perfect combo, Only audio needed patching (Simple installer file available in forum-search ALC882 patch)
 +
|-
 +
|M2S-X
 +
|SiS 756 Northbridge + SiS 965L Southbridge
 +
|
 +
* Install Method: Kalyway 10.5.2 Intel/AMD
 +
* BIOS Version: 0603
 +
* Audio: Works OOB no patch needed since onboard C-Media CM6501 8 ch audio is a USB PnP Audio Device detected as PnP Audio Device by the OS [http://www.cmedia.com.tw/?q=en/USB/cm6501]
 +
* LAN: SiS 190 10/100 Ethernet does not work, installed a cheap Realtek 8139 PCI LAN Card works OOB.
 +
* IDE: OOB Full UDMA Speed
 +
* SATA: Not yet tested
 +
* USB: Has Issues need to connect USB Devices before turning on the system and can't eject a USB Flash Storage Device. Need to Disabled Legacy USB Devices in BIOS.
 +
* Installed using IDE Drive
 +
|EFI Works no Vanilla Kernel
 +
|No
 +
|-
 +
|-
 +
|P5SD2-FM
 +
|SiS 649DX/SiS 966 chipset
 +
|
 +
* Install Method: Flat Image, ToH Kernel, Kalyway 10.5.2 Combo Update
 +
* BIOS Version:; Revision:
 +
* Audio: Works
 +
* LAN: Works
 +
* SATA & IDE: SATA unknown, IDE works
 +
* Optical Drive: NEC DVD_RW ND-4551A works
 +
* Shutdown & Reboot works, Sleep not tested
 +
|Unknown
 +
|Yes
 +
|-
 +
|M2N68-AM
 +
|NVIDIA nForce 630a/Geforce 7025
 +
|
 +
* Install Method: Kalyway 10.5.2
 +
* Audio NOT working
 +
* Network NOT working
 +
* SATA: Works: Set to AHCI in BIOS
 +
* PATA: works
 +
* USB: NOT working
 +
* Setup a FAT32 partition on the hardisk to transfer files/drivers
 +
 
 +
Update:
 +
* kernel: voodoo 9.5.0
 +
* Audio working 2 channels with voodooHDA, trying for 5.1 enabling
 +
* onboard nForce gigabit works with forceDeth
 +
* USB got activated after installing Maxtor Onetouch Firewire drive package for Mac! dont know how.
 +
* Added Asus 9600GSO PCIE x16 512MB card and works with NVEnabler but not with EFI strings or GFX strings from Osx86tools(BTW, must have tool)
 +
| None of the additional drivers have improved device supports on the onboard GPU.
 +
| Tips:
 +
* OS X enhanced graphics QE / CI wont work with onboard GPUs.
 +
* have a few OSx partitions on dedicated HDD and use CarbonCopy to create clones as you step thru each successful hack
 +
|-
 +
|M2N CM-DVI
 +
|NVIDIA nForce 630a/Geforce 7025 WORK NO FULL
 +
|
 +
* Install Method: Kalyway 10.5.2
 +
* Audio  working
 +
* Network NOT TEST LAN
 +
* SATA: Works: Set to AHCI in BIOS
 +
* PATA: -
 +
* USB:  working, USB MODEM
 +
* FULL WORKS
 +
| VIDEO: ATI RADEON 3650 256MB WORKS FULL
 +
|-
 +
| M3A78-EMH HDMI
 +
| AMD 780G/ATISB700
 +
|
 +
* Install Method: Ideneb v1.3 10.5.5
 +
* Audio working with Azalia Kext
 +
* NETWORK: working after switching on bios rom set with RealtekR1000 kext
 +
* SATA: working with AHCI in bios
 +
* PATA: not tested
 +
* USB: working fully
 +
* VIDEO: Working with nvinject Geforce 8600GT 512MB
 +
* SHUTDOWN, RESTART: works with shutdown patch
 +
* SLEEP: not tested
 +
* Memory 4GB 4x1GB Kingston
 +
|-
 +
|P4V800-X
 +
|VIA PT800 / VIA VT8237
 +
|
 +
* Install Method: Kalyway 10.5.2
 +
* BIOS Version: Unknown; Revision: Unknown
 +
* Audio: ADI AD1980 AC'97 kext
 +
* LAN: No work
 +
* SATA & IDE: Unknown
 +
* SHUTDOWN, RESTART: working fully
 +
* SLEEP: not tested
 +
|Unknown
 +
|Audio needs patching
 +
|
 +
|} . . .
  
 
=== Biostar ===
 
=== Biostar ===
Line 1,128: Line 1,739:
 
|No vanilla kernel
 
|No vanilla kernel
 
|LAN, Audio and GeForce patchs
 
|LAN, Audio and GeForce patchs
 +
 +
|-
 +
|Biostar P4M800 Pro-M7
 +
|VIA P4M800 Pro Northbridge / VT8237R Plus Southbridge
 +
|
 +
* Installation method: Kalyway 10.5.2
 +
* Intel Celeron D 336
 +
* Onboard IDE Not Tested
 +
* SATA Working
 +
* USB ports (front & Rear) working
 +
* SATA DVD-RW
 +
* Onboard LAN Works Out of The Box (Realtek RTL8201 Chip)
 +
* Onboard Audio (ALC655) works but in MONO mode. [http://www.insanelymac.com/forum/index.php?showtopic=15555 Solution here].
 +
* Onboard VGA Works (VIA S3 Unichrome) but doesn't support Quartz Extreme. Only Allows 1024 X 768 as screen resolution. [http://www.insanelymac.com/forum/lofiversion/index.php/t40631.html Follow this thread] to change the resolution.
 +
|No vanilla kernel
 +
|Audio patch
  
 
|-
 
|-
Line 1,133: Line 1,760:
 
|Chipset (NVIDIA 7025 and Unknown)
 
|Chipset (NVIDIA 7025 and Unknown)
 
|
 
|
* Install Method: SleepKernel + Kalyway
+
* Install Method: SpeedStepKernel + Kalyway
 
* Audio: Nvidia AC'97 on Kalyway DVD
 
* Audio: Nvidia AC'97 on Kalyway DVD
 
* Onboard LAN needs R1000.kext
 
* Onboard LAN needs R1000.kext
 +
* Some revisions of board use Nvidia MCP67 LAN, not Realtek.  Working using forcedeth-nockd.kext with deviceID 054c10de manually added to the info.plist
 
* SATA: AHCI mode works for hard drives and DVD drives
 
* SATA: AHCI mode works for hard drives and DVD drives
 +
* PATA: Optical drive works, but hard drives larger than 128 GB do not
 
* Optical Drive: NEC Optiarc DVD Burner
 
* Optical Drive: NEC Optiarc DVD Burner
 
* Shutdown and restart works. Sleep works, but causes weird problems with X1950 Pro video card.
 
* Shutdown and restart works. Sleep works, but causes weird problems with X1950 Pro video card.
*Unknown if onboard video works.
+
* Onboard video does not work
 
|No vanilla kernel
 
|No vanilla kernel
|LAN, Audio Patches
+
|LAN, Audio Patches, Use USB fix 1.3.mpkg to fix usb hotplug support
|-} . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+
|-
 +
|Biostar TForce 945P
 +
|Intel 945P + ICH7
 +
|
 +
* Installation: SATA DVD, PATA HD
 +
* Install method: iAtkos 2.0i, vanilla kernel
 +
* Onboard LAN (RTL 8110SC) works out of the box
 +
* Audio (ALC655) Fixed with a plist edit.
 +
|EFI v8 + Vanilla kernel
 +
|No; Audio needs [http://forum.insanelymac.com/index.php?showtopic=24019&hl=alc655+ich7# patching]
 +
|-
 +
|Biostar GF8100 M2+ SE
 +
|NForce 720a (AMD board)
 +
|
 +
* Installation: SATA HD (MUST use AHCI mode or Disk Utility won't see drives)
 +
* Install method: Kalyway 10.5.2, AMD patches and kernel
 +
* Onboard LAN: Realtek 8201CL -- add 0x076010de to Nforce kext
 +
* Audio: ALC662, says it's AzaliaAudio in BIOS but does not work
 +
* Video: Onboard GeForce 8100 shared memory does not work
 +
| Patched Kernel
 +
| No, LAN needs patch, for video and audio you will need supported PCIe/PCI cards
 +
|-
 +
|TA690G AM2
 +
| AMD 690G
 +
|
 +
* Install: Zephyroth Leopard 10.5.2 for AMD EFI
 +
* BIOS Version: R69AMC13
 +
|
 +
|Audio needs patching
 +
|}
  
 
=== DFI ===
 
=== DFI ===
Line 1,165: Line 1,823:
 
* RAID w/ Areca 1210 Working (RAID 0)
 
* RAID w/ Areca 1210 Working (RAID 0)
 
|Yes. Fully supported EFI v8 + with Vanilla kernel
 
|Yes. Fully supported EFI v8 + with Vanilla kernel
 +
|
 
|-
 
|-
 
|LanParty NF4 Ultra-D
 
|LanParty NF4 Ultra-D
Line 1,173: Line 1,832:
 
* BIOS version: 2006/04/06
 
* BIOS version: 2006/04/06
 
* IDE: Works out of the box  
 
* IDE: Works out of the box  
* SATA: Select Nforce 2/3/4/5 chipset driver in install                    
+
* SATA: Select Nforce 2/3/4/5 chipset driver in install
* LAN: Select LAN drivers in install (Both Nforce & Marvell)                                                    
+
* LAN: Select LAN drivers in install (Both Nforce & Marvell)
 
* Audio: Select ac'97 audio driver in install
 
* Audio: Select ac'97 audio driver in install
 
* Total install time: 14 min
 
* Total install time: 14 min
Line 1,195: Line 1,854:
 
|Yes
 
|Yes
 
|-
 
|-
|} . . . . . .
+
|LANPARTY UT CFX3200-DR/G Socket 939
 +
|ATI 580X + ULi 1575
 +
|
 +
* Install Method: Kalyway 10.5.2 (need to edit AppleVIAATA.kext and add device values). Updated to 10.5.5 with ASU
 +
* BIOS Version:
 +
* Audio: ALC 882 works OOB (Selected P5WDH in Installer, use HDAEnabler.kext to get info in system profiler).
 +
* USB: All ports working OOB.
 +
* Firewire: Works OOB.
 +
* LAN: Marvell 88E8053 Onboard Lan working OOB.
 +
* LAN: Marvell 88E8052 Onboard Lan working after adding values to yukon2.kext.
 +
* SATA & IDE: SATA and IDE both working with edited AppleVIAATA.kext
 +
* Optical Drive: Working IDE
 +
* Shutdown Works, Restart and Sleep don't.
 +
|EFI works, using 9.5.0 VoodooXNU RC Kernel.
 +
|Fully Working, but need to manually edit AppleVIAATA.kext on kalyway 10.5.2 install disk.
 +
|}
  
 
=== ECS ===
 
=== ECS ===
Line 1,221: Line 1,895:
 
|Via P4M800PRO, Via 8237R Plus
 
|Via P4M800PRO, Via 8237R Plus
 
|
 
|
* Install Method: Use Kalyway 10.5.1. Then Use Kalyway 10.5.2 Update. Also installed with Kalyway 10.5.2 Intel Amd DVD.
+
* Install Method: Use Kalyway 10.5.1 Intel Amd DVD. Use 10.5.6 combo update with netkas method. Netkas method works but you MUST enable root user in directory utility and type "sudo su" in terminal first before running the netkas script. Make sure you have voodoo kernel 9.5 installed BEFORE YOU REBOOT. If you have an nvidia card remove all ati*, appleintelgma* video kexts before reboot. IDeneb 10.5.5 also works but do not install any video drivers.
 
* BIOS: 5/25/2007
 
* BIOS: 5/25/2007
* Audio: AC97 stereo fully working with patch, otherwise mono.
+
* Audio: AC97 stereo fully working with patch, otherwise mono OOB.
* Graphics: Onboard video unknown, used Geforce 6200, Core Image and Quartz supported with titan, natit, or NVInject. However, using any of these three with my 6200 and Kalyway 10.5.1 DVD results in a black screen and long boot times, but it does boot. Removing titan, natit, NVinject kext fixes it and it boots fast. Do not install video kexts until after updating. Fix black screen and long boot times with toh 9.2.0 kernel. Or avoid this entirely and use Kalyway 10.5.2 DVD.
+
* Graphics: Onboard video unknown. Used Geforce 6200 128mb AGP and 7600gs 512 AGP. QE CI supported with NVinject.
* LAN: Works with viarhine.kext, but has dropouts and you have to restart. Use wireless USB adapter
+
* LAN: Works with viarhine.kext, but has dropouts and you have to restart. Use wireless USB adapter.
* SATA & IDE: IDE works, SATA works. USB Works.
+
*Even Fully supported PCI LAN cards Tends to drop out just like the on board, many people are having this problem just with this particular chipset no just the motherboard. Tried many things to get this to work but have not had success, some bios tweaks make it last longer but it still dies from heavy usage.
|Don't know. Installed using MBR.
+
* SATA & IDE: IDE works, SATA works. USB Works. Time Machine works with toh ionetworkingfamily.kext.
|You might have to slightly increase voltage on your memory with this board in BIOS and turn bios protect off.  I could not install Kalyway 10.5.2 DVD at first and got an error "Could not validate Base Install". After upping my memory voltage by .20 and turning BIOS protect off it worked fine. Depends on memory probably.
+
|Vanilla kernels do not work because of via chipset. Installed using MBR. GUID works too on my IDE drive. Dual boots with XP.
 +
|You might have to slightly increase voltage on your memory with this board.  I could not install Kalyway 10.5.2 DVD at first and got an error "Could not validate Base Install". After upping my memory voltage by .20 it worked fine. Depends on memory probably.
 +
 
 +
LAN dropouts even using a PCI Supported NIC.
 
|-
 
|-
 +
|G31T-M
 +
|Intel G31 + ICH7
 +
|
 +
* Install Method: Leo4All_v3 (no other worked)
 +
* BIOS Version: Unknown
 +
* Audio: ALC662 (Only AzaliaOut), HDA-Patcher w/ ALC662.txt didn't work
 +
* LAN: not tested
 +
* SATA & IDE: no problems occured
 +
* Optical Drive: positively tested with SATA & PATA drives
 +
* Shutdown, reboot work
 +
* OnboardGFX not tested
 +
* Only worked with whether cpus=1 or ACPI disabled. Only one core recognized by OSX
 +
* NOT RECOMMENDED
 +
<BR><BR> UPDATE BY SEARAY: YOU CAN USE THIS BOARD WELL IF YOU APPLY BIOS PATCH. SEE 10.5.5 HCL for the fix. It works in 10.5.2 and 10.5.6
 +
|Yes
 +
|No, Sound needs Patching
 +
|- < Make sure this is at the beginning and end of your system, no need for two, just one
 
|GCT-M/1333 (V3.0)
 
|GCT-M/1333 (V3.0)
 
|Intel 945GC + ICH7
 
|Intel 945GC + ICH7
Line 1,272: Line 1,966:
 
|Yes
 
|Yes
 
|Yes except Audio
 
|Yes except Audio
 +
|-
 +
|K8M890M-M (V1.0A)
 +
|K8M890 + 237R
 +
|
 +
* Install Method: Zephyroth AMD 10.5.2, AC97, Via Rhine, MBR Bootloader options selected
 +
* BIOS: 9/12/2007, American Megatrends
 +
* Audio: AC97, works
 +
* LAN: VIA Rhine, works with install option checked
 +
* WLAN: Linksys WUSB54G, USB works with prasys drivers
 +
* SATA & IDE: IDE Maxtor 34GB (works), SATA WD 160GB (works), IDELGDVDRW (not fully tested)
 +
* Graphics: Sapphire X1650 Pro PCIe, no artifacts (sometimes multiple res & qe/ci when hacked. trouble.)
 +
* Graphics: Onboard IGP S3, does not work.
 +
* Shutdown, reboot work.  Does not sleep.
 +
* 2.2 GHz AMD Athlon 64 X2 AM2, Crucial 2GB 800Mhz (detected as 667Mhz) PC6400
 +
|Yes
 +
|Yes, except onboard graphics and added vg/wlan cards.
 
|-
 
|-
 
|}
 
|}
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+
.
 +
 
 +
===Elitegroup===
 +
{| class="wikitable" width="100%"
 +
!Hardware Name
 +
!Chipset
 +
!Notes
 +
!EFI/Vanilla kernel working
 +
!Fully Working w/o Patch
 +
|-
 +
|945gct-m v 3.0
 +
|Intel 945GC + ICH7
 +
|
 +
* Install Method: Kalyway 10.5.2 intel amd sse2 sse3
 +
* BIOS: latest
 +
* Audio: No, Motu Ultralite used instead.
 +
* LAN: works oob, SMB works thank god
 +
* SATA & IDE: both work oob
 +
* Graphics: e-vga nvidea 7300gs 256 mb ddr2, works with /movevideodrivers trick, crashes when 'detect displays'. all resolutions work, multiple displays not yet tested.
 +
* USB 2.0 works
 +
* Belkin firewire pci card works oob
 +
* Shutdown, reboot work. VERY Slow comes with 512mb of patients
 +
* 3.07 P4 w/ HT, Crucial 2GB 800Mhz (detected as 667Mhz)
 +
* FSB running at 533
 +
* xbench score @ 99, with dashboard killed.  
 +
* Logic pro and Final Cut Express 4.0 work
 +
|Yes
 +
|Yes except Audio
 +
|-
 +
|}
 +
 
  
 
=== eVGA ===
 
=== eVGA ===
Line 1,285: Line 2,025:
 
!Fully Working w/o Patch
 
!Fully Working w/o Patch
 
|-
 
|-
|eVGA 680i SLI   122-CK-NF68-A1
+
|eVGA 780i SLI132-CK-NF78-A1
|nVidia nForce6 680i SLI Chipset
+
|nVidia nForce 780i SLI Chipset
 +
|
 +
* Install method: Kalyway 10.5.2
 +
* Installation: SATA HD w/ GUID
 +
* BIOS version: P06
 +
* PATA: works (PATA optical disk work during installation)
 +
* SATA: all ports work but unstable when writing/reading medium size files
 +
* LAN: not working (beta driver work but unstable)
 +
* Audio: ALC888S (works with ALC888 driver)
 +
|EFI v8 + 9.2 sleep kernel
 +
|No, sleep/shut down not working properly, system randomly freeze under idle/load
 +
|-
 +
|-
 +
|eVGA 680i SLI122-CK-NF68-A1
 +
|nVidia nForce 680i SLI Chipset
 
|  
 
|  
 
* Install method: Kalyway 10.5.1 + Kalyway 10.5.2 combo update + Apple Graphics update 1.0
 
* Install method: Kalyway 10.5.1 + Kalyway 10.5.2 combo update + Apple Graphics update 1.0
Line 1,292: Line 2,046:
 
* BIOS version: P32
 
* BIOS version: P32
 
* IDE: Works out of the box  
 
* IDE: Works out of the box  
* SATA: read works/no write: nForce driver in the works                    
+
* SATA: read works/no write: nForce driver in the works
* LAN: Marvell 88E1116, beta driver still in the works                                              
+
* LAN: Marvell 88E1116, beta driver works after unplugging computer. To stop freezing: set cpus=1 
 
* Audio: Fully working w/ ALC885 codec using Taruga's HDApatcher v1.20
 
* Audio: Fully working w/ ALC885 codec using Taruga's HDApatcher v1.20
 
|EFI v8 + modbin 9.2  
 
|EFI v8 + modbin 9.2  
 
|No, patch audio, use PCI Nic for stability, screen saver/restart/shutdown perfect, sleep no good
 
|No, patch audio, use PCI Nic for stability, screen saver/restart/shutdown perfect, sleep no good
 
|-
 
|-
|eVGA NF41SLI  133-K8-NF41-AX
+
|eVGA NF41SLI133-K8-NF41-AX
 
|nVidia nForce4 SLI Chipset
 
|nVidia nForce4 SLI Chipset
 
|  
 
|  
Line 1,305: Line 2,059:
 
* BIOS version: unknown
 
* BIOS version: unknown
 
* IDE: Works out of the box  
 
* IDE: Works out of the box  
* SATA: read works/write                    
+
* SATA: read works/write
* LAN: OOB                                              
+
* LAN: OOB
 
* Audio: Fully working OOB
 
* Audio: Fully working OOB
 
|EFI v8 + sleepkernel
 
|EFI v8 + sleepkernel
 
|Yes, screen saver/restart/shutdown perfect, sleep no good
 
|Yes, screen saver/restart/shutdown perfect, sleep no good
|} . . . . .
+
|} .
 +
 
 +
 
 +
eVGA 680i SLI LT
 +
Nforce
 +
 
 +
*Install method: Kalyway 10.5.2
 +
* Installation: SATA disc and hd
 +
* Bios is most recent as of Dec 2008
 +
* Sata works perfectly, havent tested loads yet.
 +
* Lan: Works with nforce patch but freezes under load even with different card installed. I believe it is a kernel issue. Ideneb 10.5.6 seems to fix it but not completely sure.
 +
* Audio works using azalia, hadnt tried patching using ALC880
 +
Nforce kernel. Sleep broken
  
 
=== Foxconn ===
 
=== Foxconn ===
Line 1,319: Line 2,085:
 
!EFI/Vanilla kernel working
 
!EFI/Vanilla kernel working
 
!Fully Working w/o Patch
 
!Fully Working w/o Patch
 +
|-
 +
|A76ML-K
 +
|ATI Radeon HD3000 series
 +
|
 +
*IDE: Works
 +
*SATA: No
 +
*Install Method: iPC OSX8x 10.5.6 INTEL/AMD SSE2/SSE3 Universal
 +
*No audio for on board (VIA VT17088). Kernel Panic on installer exit, restart, shutdown, Sleep not yet tested. You MUST disable SATA before installing as it will goto "waiting for root device" error, enable after install is fine.
 +
|-
 +
|MB6497-RS
 +
|SiS964
 +
|
 +
*Install Method: Leo4All v4 Beta (10.5.2)
 +
*Audio: Realtek AC97 ALC655 (Works with [http://forum.insanelymac.com/index.php?act=attach&type=post&id=26624 this] driver)
 +
*Lan: Realtek RTL8201BL (SiS900 chipset, works with [http://forum.insanelymac.com/index.php?showtopic=97690&hl=sis900 this] driver)
 +
*IDE: Not Tested
 +
*SATA: Works
 +
*Shutdown/Sleep: Works
 +
*USB2.0: sometimes errors
 +
|Vanila not tested
 +
|No
 
|-
 
|-
 
|P9657AB-8EKRS2H
 
|P9657AB-8EKRS2H
Line 1,332: Line 2,119:
 
|EFI V8 GUID/MBR + Vanilla Kernel
 
|EFI V8 GUID/MBR + Vanilla Kernel
 
|No
 
|No
|} . . . . . . . . .
+
|-
 +
|P9657AB-8EKRS2H
 +
|Intel 965 Express
 +
|
 +
*Install Method Patched Leo4All 10.5.2
 +
*Audio - not tested
 +
*Lan Works out of box
 +
*Firewire works out of box
 +
*IDE (jmicron) Works fine after patching DVD
 +
*SATA Works in AHCI Mode
 +
*Shutdown / Sleep No problems shutting down, have not tested sleep
 +
* Overall Usability ( High )
 +
|Leo4All + Vanilla Kernel
 +
|No
 +
|-
 +
|M7PMX-S
 +
|Intel nForce 630i Chipset
 +
|
 +
*Install Method: Kalyway 10.5.2 with Sleep Kernel
 +
*Integrated Video only works with one resolution with NVInject basic drivers (1024x768)
 +
*On-Board HDMI untested, although shows multi-monitor support but only one monitor is connected.
 +
*Audio - not working, needs ALC888 Patch
 +
*Lan does not work. Needs patcher or compatible card
 +
*IDE Works perfect
 +
*SATA untested
 +
*Shutdown / Restart / Sleep No problems shutting down or restarting, sleep doesn't work
 +
*Needs to boot into Single User Mode after install to bypass Setup screen as it crashes on transfer screen.
 +
*Overall Usability ( High )
 +
|EFI V8 + Sleep Kernel Vanilla Kernel not working(infinite reboot loop)
 +
|No, Needs Audio & LAN Patches. Otherwise fully compatible
 +
|-
 +
|C51XEM2AA-8EKRS2H
 +
|NVIDIA nForce 590 SLI
 +
|
 +
*Install Method: Zephyroth 10.5.2 rev.1
 +
*Video: GeForce 8800GTS 640MB works with nvinject
 +
*Audio: ALC882D, not working
 +
*LAN: Marvell 88E1121 Dual 10/100/1000 Base T Enthernet PHY, not working
 +
*IDE: Works
 +
*SATA: Does not work
 +
*Shutdown / Restart / Sleep: No problems shutting down or restarting, sleep is untested
 +
*Overall Usability ( Mediocre )
 +
|EFI/Vanilla not tested
 +
|No, needs patches for Audio, LAN and SATA.
 +
|-
 +
|P45A-S
 +
|Intel P45 Chipset
 +
|
 +
*Will not install. Won't recognize Firewire port and stops installing there.
 +
*Turning off the Firewire port doesn't work, simply causes more errors.
 +
|N/A
 +
|No, not at all.
 +
|}.
  
 
=== Gigabyte ===
 
=== Gigabyte ===
Line 1,342: Line 2,181:
 
!EFI/Vanilla kernel working
 
!EFI/Vanilla kernel working
 
!Fully Working w/o Patch
 
!Fully Working w/o Patch
 +
|-
 +
|[http://tw.giga-byte.com/Products/Motherboard/Products_Overview.aspx?ProductID=2843 GA-EP45-DS3]
 +
|Intel P45 ICH10
 +
|
 +
* Note from someone else: I found this entry to be misleading about the audio chipset. Use the next one. You only need the two kexts from Taruga: HDAEnabler.kext, and ALC888 Address 2 AppleHDA.kext. You don't have to deal with any Linux dump. Putting the kexts in the EFI partition did not work since they had dependencies in the original kexts.
 +
* [http://forum.insanelymac.com/index.php?showtopic=133683  DSDT patch] & [http://forum.insanelymac.com/index.php?showtopic=132757 ChameleonSM] for pure vanilla setup.
 +
* [http://forum.insanelymac.com/index.php?showtopic=86167 Install Method: Chameleon + Retail Method] - SATA AHCI Mode
 +
* Bios revision F8 (current)
 +
* All 6 SATA detected as Generic AHCI - Need to add Device ID to AppleAHCI for correct detection (3a228086)
 +
* JMicron JMB368 IDE: Detected not tested yet. (197b2368)
 +
* Dual Gigabit OOB (10ec8168 rev 02)
 +
* Firewire OOB (Texas Instrument TSB43AB23 (104c8024)
 +
* All USB OOB
 +
* Audio: ALC885 (3a3e8086 rev 02)[http://forum.insanelymac.com/index.php?showtopic=124794&st=20 Internal/Microphone working with this guide]
 +
* Used with Quad Xeon X3320
 +
* Shutdown/Restart: [http://store.psystar.com/opensource/openhaltrestart Psystar OpenHaltRestart]
 +
|ChamelelonEFI + Vanilla Kernel
 +
|No - [http://forum.insanelymac.com/index.php?showtopic=124794&st=20 Audio need to patch.].
 +
----
 +
'''[http://forum.insanelymac.com/index.php?showtopic=133683 New DSDT Method]''' :- run the DSDT Patcher with -newHPET from terminal, edit the dsdt_fixed.txt in Debug Folder (search and replace 'AZAL' with 'HDEF') recompile the dsdt-fixed.txt (iasl dsdt_fixed.txt), copy the dsdt.aml to / - copy the [http://forum.insanelymac.com/index.php?showtopic=86167 chameleonsm] (cp chameleonsm /boot). Before reboot remove/backup all patched kext files, run "kextcache -a i386 -m /Extra/Extensions.mkext /System/Library/Extensions/". Now you can safely reboot..
 +
----
 +
A simple sed for changing AZAL to HDEF -> sed -i 's/AZAL/HDEF/' yourfile . Then you can run -> grep HDEF yourfile" - to see if the changes are made.
 +
|-
 +
|GA-EP45-DS3L
 +
|Intel P45 ICH10
 +
|
 +
* Install Method: KALYWAY and IATKOS 10.5.2 works perfectly (need to set to AHCI in BIOS and install in first partition of drive).  RECOMMENDED METHOD: Also works perfectly with RETAIL DVD or existing Leopard volume using Chameleon install method combined with LS8 patch pack (see links below).
 +
* Audio: Works perfectly with linux audio codec dump (see linked file) and Taruga's 3 files HDApatcher, HDAEnabler.kext, and ALC888 Address 2 AppleHDA.kext (to have full bass use AppleHDA.kext that is modded using limini's method)
 +
* LAN: onboard works only with SMB, AFS, and bonjour not reliable, use the card mentioned [http://forum.insanelymac.com/index.php?showtopic=135948 here]
 +
* All 6 SATA AND 2 IDE Ports work perfectly OOB, including both kinds of SATA/IDE hard drives and optical drives. Need to set ACHI setting in BIOS before install. USB2 Ports work perfectly.
 +
* ICH10 working OOB
 +
* WORKS OOB: Shutdown, Sleep and Reboot. Retail install needs patch [http://forum.insanelymac.com/index.php?showtopic=135948 here]
 +
* Core 2 Duo 3Ghz E8400 processor working perfectly, add-on Bytecc Firewire card working OOB. Palit NVidia 8600 card working perfectly. Running Leopard 10.5.5
 +
* Great overclocking board. Overclocked at 3.6Ghz with stock Intel cooler. Overclocked at 3.87Ghz with add-on Scythe Shuriken CPU cooler. XBench score of 216. 1720 Mhz Front-Side Bus. 30% faster than the iMac 3.06Ghz Extreme, even for the graphics surprisingly! The overclocked front-side bus elimanates most of the system bottlenecks.
 +
* 30 successful installations reported for this new Gigabyte motherboard.
 +
* Comment by one user (most don't have this problem): I had to perform entire installation process with only 1 piece of RAM. I wasted several hours dealing with incredible slowness before I figured this out.
 +
----
 +
* for more info visit:
 +
* [http://forum.insanelymac.com/index.php?showtopic=135948 RETAIL DVD with 10.5.5 &10.5.6 install with all kexts and audio downloads for this exact board]
 +
* [http://forum.insanelymac.com/index.php?showtopic=86167 Method for RETAIL DVD install or existing authentic Leopard volume]
 +
* [http://forum.insanelymac.com/index.php?showtopic=112708&hl=ep35+ds3l Bios Settings, and other installation info]
 +
* [http://forum.insanelymac.com/index.php?showtopic=77165 LS8 patch pack. Additional fine-tuning patches for after Kalyway and Retail DVD installs - For Gigabyte motherboards]
 +
* [http://forum.insanelymac.com/index.php?showtopic=123699 Troubleshooting discussion thread for installing on this motherboard + CODEC DUMP FILE]
 +
* [http://forum.insanelymac.com/index.php?showtopic=123697 Troubleshooting discussion thread for post-installation problems on this motherboard]
 +
* [http://wiki.osx86project.org/wiki/uploads//0/00/AppleHDA.kext.zip AppleHDA.kext that is modded using limini's method for full bass]
 +
* [http://www.cheetha.net/Kext_Helper/Software.html Kext Installer Application for Taruga and other patches]
 +
|YES: ChameleonEFI or KalywayEFI, + Vanilla kernel
 +
|No. Need to install Audio patch. Very easy to do. Use also LS8v12 kext patch installer for this board for optimal performance. If installing 10.5.5 Leopard update, you must install 10.5.4 first along with LS8 patch pack before the 10.5.5 update. Avoid NVinject kext since it may not be compatible with all NVidia graphic boards (NVinject may cause bootup crash), use the proven LS8 pack instead.
 +
|-
 +
|GA-EP45-DQ6
 +
|Intel P45 ICH10
 +
|
 +
* Install Method: You can use the same [http://forum.insanelymac.com/index.php?showtopic=77165  LS8_install_pack] as for the P35-DS4
 +
* Audio: ALC889A works (In/Out/Mic/SPDIF) with patch AppleHDA.kext
 +
* LAN: all 4 LAN work w/ vanilla kext, need RTL1000.kext for AFP/Bonjour
 +
* Purple SATA port (gigabyte SATA) Works w/ vanilla AppleAHCI.kext
 +
* Orange SATA port (ICH10) will need a patch IOATAFamily.kext
 +
* Raid on ICH10 working with ChameleonEFI
 +
* IDE Works
 +
* WORKS: Shutdown, Sleep and Reboot
 +
----
 +
* for more info visit:
 +
* [http://forum.insanelymac.com/index.php?showtopic=115121 GA-EP45-DQ6 Thread]
 +
* [http://forum.insanelymac.com/index.php?showtopic=77165 LS8 Install Pack Thread]
 +
* [http://forum.insanelymac.com/index.php?showtopic=76404 karaakeha's RAID guide]
 +
|ChameleonEFI + Vanilla kernel
 +
|No
 +
|-
 +
|GA-EP45-DS4P
 +
|Intel P45 ICH10
 +
|
 +
* Install Method: Kalyway 10.5.2. Upgrade to Kalyway 10.5.3. Used Software update to go to 10.5.4
 +
* Audio: ALC889A works (In/Out/Mic/SPDIF) with Taruga's new AppleHDA enabler and HDAudio.kext
 +
* LAN: the two LAN work w/ vanilla kext. Have not tried apple talk, etc.
 +
* SATA port (ICH10) works out of the box. Have one HD connected to one of the controllers and a BluRay/DVD/CD connected to the other.
 +
* Raid on ICH10 working with ChameleonEFI
 +
* IDE Works
 +
* Shutdown, Sleep and Reboot don't work. Used this [http://forum.insanelymac.com/index.php?showtopic=73234&amp;st=0&amp;p=641140&amp;] to fix power off only.
 +
* for more help you can sop by at:
 +
* [http://forum.insanelymac.com/index.php?showtopic=115121 GA-EP45-DQ6 Thread]
 +
|PC_EFI version 8 + Vanilla kernel
 +
|No
 +
|-
 +
|GA-EP45-UD3P
 +
|Intel P45 ICH10
 +
|
 +
Stub will update with more info, but working 100%
 +
* Install Method: Kalyway 10.5.2 -> 10.5.5 Retail
 +
* Audio: ALC889A
 +
|ChameleonEFI + Vanilla kernel
 +
|No. Audio needs patching.
 
|-
 
|-
 
|GA-X38-DS5
 
|GA-X38-DS5
Line 1,361: Line 2,291:
 
|
 
|
 
* Install Method: Kalyway 10.5.1 & Kalyway Combo Update
 
* Install Method: Kalyway 10.5.1 & Kalyway Combo Update
* BIOS Version: 3.70; Revision: Unknown
+
* BIOS Version: 3.70; Revision: 1.0
 
* Audio: ALC889A works with patch
 
* Audio: ALC889A works with patch
 
* LAN: Works OOB
 
* LAN: Works OOB
Line 1,404: Line 2,334:
 
|Yes. Fully supported EFI v8 + Vanilla kernel
 
|Yes. Fully supported EFI v8 + Vanilla kernel
 
|No. Audio need patch.
 
|No. Audio need patch.
 +
|-
 +
|GA-EP35-DS3 v2.1
 +
|Intel P35 (ICH9)
 +
|
 +
* Install Method: IATKOS 1.0r2 + [http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1052comboupdate.html Apple Update 10.5.2] but direct update from 10.5.1->10.5.3
 +
* BIOS Version: F2
 +
* Audio: Works with AppleHD patch
 +
* LAN: Works out of the box
 +
* SATA works, but detect only 2 drives, need patches to see all SATA drives.
 +
|Yes. Fully supported EFI v8 + Vanilla kernel
 +
|No. Audio need patch.
 
|-
 
|-
 
|GA-EP35-DS3R
 
|GA-EP35-DS3R
Line 1,443: Line 2,384:
 
|Yes (9.2.2)
 
|Yes (9.2.2)
 
|No. Audio patch needed.
 
|No. Audio patch needed.
 +
|-
 +
|GA-EP35-DS4
 +
|Intel P35
 +
|
 +
* Install Method: Kalyway 10.5.2
 +
* BIOS Version: F2
 +
* Audio: OOB
 +
* LAN: OOB
 +
* SATA & IDE: normal SATA works OOB, but not with software RAID0/1 (may have been my disks however). IDE untested.
 +
* Note: Thanks to all those with GA-P35 and EP35 boards who posted here! Bought board for compatibility - was not disappointed.
 +
|Yes (9.2.2)
 +
|Yes.
 
|-
 
|-
 
|EP35-DS4
 
|EP35-DS4
Line 1,455: Line 2,408:
 
|EFI v8 Works
 
|EFI v8 Works
 
|No. Audio patch needed.
 
|No. Audio patch needed.
 +
|-
 +
|GA-G33M-S2
 +
|Intel G33
 +
|
 +
* Install Method: Kalyway 10.5.2 on IDE disk, works out of the box
 +
* Video: Onboard Video Chipset Intel GMA 3100 works out of the box at 1024*768
 +
* LAN: Onboard Realtek RTL8111B Works out of the box, DHCP works OK
 +
* USB: works OK
 +
* Audio: Onboard Realtek ALC889A not tested
 +
|
 +
|No. Video patch needed
 +
|-
 +
|GA-M57SLI-S4
 +
|nVIDIA® nForce 570-SLI
 +
|
 +
Metodo de instalacin LEO4ALLv3 opciones seleccionadas:
 +
*Netkas 9.2.0 Sleep
 +
*ACPIPlataform sin seleccionar ninguna
 +
*SMBIOS - DDR800
 +
*Audio - ALC 888
 +
*NVInject - 256 MB v 0.2.1 (Trabaja lo basico con el [http://www.megaupload.com/es/?d=SWC1S2D9 NVidia Universal Installer.mpkg.zip] funciona perfecto la tarjeta de video)
 +
*ForceDeth no funciona la tarjeta de red solo la detecta y detecta un modem (no se de donde jj)
 +
*Nforce Test.
 +
Tiene 4 GB de RAM pero al instalar se congela a 3 minutos de acabar hay que remover 2 Gb e intalar si se agrega despues no causa problemas (hasta ahorita).
 +
* DVD SATA
 +
* Disco IDE 500Gb
 +
* LAN Marvell 88E1116 phy (10/100/1000 Mbit)
 +
* CPU AthlonTM 64 X2 4800 Dual-Core
 +
* Audio: Onboard Realtek ALC888 CODEC chip
 +
* Onboard T.I. TSB43AB23 chip
 +
* Video Nvidia Geforce 8600GT
 +
 +
|unknow
 +
| No, Video y LAN necesita parche
 
|-
 
|-
 
|GA-M61PM-S2 Rev. 2.0
 
|GA-M61PM-S2 Rev. 2.0
Line 1,467: Line 2,454:
 
|Unkown
 
|Unkown
 
|Needs DVD to boot.
 
|Needs DVD to boot.
 +
|-
 +
|GA-M61SME-S2
 +
|NVidia nForce 6100/415
 +
|
 +
* Install Method: kaly AMD
 +
* BIOS Version: F9
 +
* Audio: Works with patched AppleHDA.kext
 +
* LAN: Not working
 +
* Video: No QE/CI Using GeForce 8600GT (PCI-e)
 +
* SATA & IDE: SATA works OOB.
 +
|
 +
|
 
|-
 
|-
 
|GA-M61P-S3 Rev. 1.0
 
|GA-M61P-S3 Rev. 1.0
Line 1,496: Line 2,495:
 
* Install Method: Kalyway 10.5.1 & Kalyway Combo Updater
 
* Install Method: Kalyway 10.5.1 & Kalyway Combo Updater
 
* BIOS Version: F12; Revision: 2.1
 
* BIOS Version: F12; Revision: 2.1
* Audio: Works with HDA ICH9 ALHC888 works & Apple HDA Patcher v1.20
+
* Audio: Works with HDA ICH9 ALHC888 works & Apple HDA Patcher v1.20 (EDIT: actually is a ALC889a that patch works great)
 
* LAN: Works OOB
 
* LAN: Works OOB
 
* SATA & IDE: SATA works with IOATAFamily.kext V1.1
 
* SATA & IDE: SATA works with IOATAFamily.kext V1.1
Line 1,516: Line 2,515:
 
|No.  Audio doesn't work
 
|No.  Audio doesn't work
 
|-
 
|-
 +
 
|GA-P35-DS3P
 
|GA-P35-DS3P
 
|Intel P35 + ICH9R
 
|Intel P35 + ICH9R
Line 1,540: Line 2,540:
 
|Yes; EFI & 9.2.2 vanilla
 
|Yes; EFI & 9.2.2 vanilla
 
|No, Audio needs patching (see above)
 
|No, Audio needs patching (see above)
 +
|-
 +
|GA-P35C-DS3R
 +
|Intel P35 + ICH9R
 +
|
 +
* Install Method: iDeneb 10.5.5
 +
* Hardware: Intel Core 2 Duo 2.66GHz CPU, Patriot 4GB DDR2 667MHz memory (dual channel), EVGA NVIDIA GeForce 8400GS PCIe graphics card, 600watt Cooler Master PSU, Samsung 1TB SATA HDD, Sony IDE DVD+-RW/DL Burner.
 +
* Everything works out of the box, except for the following:
 +
** IDE (Gigabyte SATA2 controller chip, which is a re-branded JMicron ATA/SATA controller).  I just changed IOPCIPrimaryMatch in JMicronATA.kext and it worked.
 +
** NVIDIA Dual-monitor setup.  I just tweaked the NVCAP value in NVinject.kext and it worked.  See NVinject forums for info.
 +
** Sleep and shutdown.  To get both of these working, I changed Suspend type to S1 in the BIOS, and installed "poweroff_fix" (search the InsanelyMac forum) which disables 1 of the CPU cores at shutdown time.
 +
* Working out of the box: Full audio (ALC889), LAN, SATA (set BIOS to AHCI mode), USB, PCIe, Bluetooth, IDE DVD Burner, Video with NVinject (QE/CI), EFI, Vanilla kernel, etc.
 +
|Yes
 +
|Almost (See fixes I've listed here).
 
|-
 
|-
 
|GA-P35C-DS3R
 
|GA-P35C-DS3R
Line 1,589: Line 2,602:
 
|EFI v8 + Vanilla Kernel
 
|EFI v8 + Vanilla Kernel
 
|No.  Audio needs patch
 
|No.  Audio needs patch
 +
|-
 +
|GA-P31-DS3L
 +
|Intel P31 + ICH7
 +
|
 +
* Install Method: Kalyway 10.5.2, iDeneb 10.5.5, Jas 10.5.2 and Leo4all 10.5.2
 +
* BIOS Version:; Revision:
 +
* Audio: ALC888 with AC97 kext (on DVDs) or ALC888audio (6 channel and inputs)
 +
* LAN: 8111 (kext on DVDs)
 +
* SATA & IDE: SATA and IDE works
 +
* Updates working with IntelCPUPMDisabler.kext
 +
* Shutdown, sleep and restart works with shutdownfix
 +
*
 +
|Vanilla works with core duo and core2duo processors. EFIv8 works.
 +
|Yes
 
|-
 
|-
 
|GA-P31-DSL
 
|GA-P31-DSL
Line 1,613: Line 2,640:
 
|Yes. Fully supported EFI v8 + Vanilla kernel
 
|Yes. Fully supported EFI v8 + Vanilla kernel
 
|No. Audio needs patch.
 
|No. Audio needs patch.
 +
|-
 +
|GA-G31M-ES2L
 +
|Intel G31
 +
|
 +
* Install Method: Retail disk, using HFS+ EFI bootloader
 +
* BIOS Version: F3
 +
* Audio: Realtek ALC662, untested
 +
* LAN: Works out of the box
 +
* SATA & IDE: Works out of the box
 +
*
 +
| Yes.  Fully supported EFI + Vanilla kernel
 +
| Audio may need patch.
 
|-
 
|-
 
|GA-G31M-S2L
 
|GA-G31M-S2L
 
|Intel G31
 
|Intel G31
 
|
 
|
* Install Method: LEO4ALLv2 & Vanilla Kernel & EFI
+
* Install Method: iDeneb 10.5.5 - selected: Vanilla Kernel 9.5 on Intel Core2Duo 7200
 +
* BIOS Version: F8a
 +
* Audio: Realtek ALC662 works 100% using Alc662 chipset patch on installer DVD
 +
* LAN: Works out of the box
 +
* SATA & IDE: Work OOB using ICHx chipset patch on installer DVD
 +
*
 +
|Yes. Fully supported EFI Chameleon + Vanilla kernel
 +
|No. Audio needs patch.
 +
|-
 +
|GA-G31M-S2L
 +
|Intel G31
 +
|
 +
* Install Method: LEO4ALLv3 -selected:Vanilla Kernel 9.2.2, EFI, & ICHx Chipset drivers
 
* SM Bios 2.3, ACPI 1.0b, PnP 1.0a, DMI 2.0
 
* SM Bios 2.3, ACPI 1.0b, PnP 1.0a, DMI 2.0
* Audio: Realtek ALC662 works with AppleHDA patcher & alc662.txt
+
* Audio: Realtek ALC662 works with AppleHDA patcher & alc662.txt or Use Azallia Audio on installer DVD
* LAN: Works out of the box, reccomended to set ip address manualy
+
* LAN: Works out of the box, reccomended to set ip address manualy. *Bonjour doesn't work properly! Switched to Netgear GA311 for full compatibility.
* SATA & IDE: Work OOB
+
* SATA & IDE: Work OOB using ICHx chipset patch on installer DVD
 
* [http://forum.insanelymac.com/index.php?showtopic=71338 Thysm00 Guide]
 
* [http://forum.insanelymac.com/index.php?showtopic=71338 Thysm00 Guide]
 
|Yes. Fully supported EFI v8 + Vanilla kernel
 
|Yes. Fully supported EFI v8 + Vanilla kernel
 
|No. Audio needs patch.
 
|No. Audio needs patch.
 +
|-
 +
|GA-G31M-S2L
 +
|Intel G31
 +
|
 +
* Install Method: Kalyway 10.5.2, Vanilla Kernel
 +
* Configuration: M/B, Core2Quard (detected as 2.4 GHz Unknown), Radeon X1600XT (id 0x71c0), 2x1GB DDR2
 +
* After installation: 1) download [http://forum.insanelymac.com/index.php?act=attach&type=post&id=6740 Azalia HD Audio Fix] 2) [http://forum.insanelymac.com/index.php?showtopic=69345&pid=508765&mode=threaded&start= Fix VideoCard] 3) 4) [http://www.psystar.com/openhaltrestart.html Fix Reboot/Shutdown/Sleep? problem] 5) 10.5.3 ComboUpdate 6) Download 10.5.4 update from AutoUpdate
 +
* LAN: Works out of the box, reccomended to set ip address manualy. *Bonjour doesn't work properly! But, sometimes after correct (not manual) restart/shutdown, LAN not working (error - cable unplugged). 
 +
* SATA & IDE: Work OOB using ICHx chipset patch on installer DVD
 +
* [http://forum.insanelymac.com/index.php?showtopic=71338 Thysm00 Guide]
 +
* Correct reboot & shutdown working after path, sleep maybe not working. Internal video not fully working.
 +
|Yes. Fully supported EFI v8 + Vanilla kernel
 +
|No. Audio needs patch.
 +
|-
 +
|GA-G31M-S2L
 +
|Intel G31
 +
|
 +
* Install Method: iDeneb 10.5.5
 +
* Selected packages (during installation): ALC662, ICHx chipset patch
 +
* Audio: required patching (see right)
 +
* LAN: Works out of the box.
 +
* SATA & IDE: Had problems booting with SATA disk drive. PATA worked with no problems.
 +
|Yes. Fully supported EFI v8 + Vanilla kernel
 +
|No. Installed AzaliaAudio.zip from [http://forum.insanelymac.com/index.php?showtopic=36520&hl=azalia]
 +
|-
 +
|GA-G31MX-S2
 +
|Intel G31
 +
|
 +
* Install Method: Jas 10.5.4
 +
* Audio: Realtek ALC888 works out of box
 +
* LAN: Realtek RTL8110SC works out of the box
 +
* SATA & IDE: SATA works out of box, IDE DVD-ROM drive works
 +
* Video: Intel GMA 3100 has no core image or quartz extreme, will add Nvidia 7300LE 256MB card later
 +
|Yes.
 +
|Yes
 
|-
 
|-
 
|GA-K8NF-9
 
|GA-K8NF-9
Line 1,635: Line 2,721:
 
* SATA: Works out of the box
 
* SATA: Works out of the box
 
* IDE: Not tested
 
* IDE: Not tested
 +
|Yes
 +
|Yes
 +
|-
 +
|GA-K8N-SLI
 +
|NVIDIA nForce4
 +
|
 +
* Install Method: Leo4All v2
 +
* BIOS version: F9
 +
* Audio: Realtek ALC850 -marked 850 driver in Leo install.
 +
* LAN: Works OOB
 +
* SATA: Works OOB
 +
* IDE: Works OOB
 +
* Restart & Shutdown work, no Sleep
 
|Yes
 
|Yes
 
|Yes
 
|Yes
Line 1,727: Line 2,826:
 
|No; Audio/LAN needs patching
 
|No; Audio/LAN needs patching
 
|-
 
|-
 +
|GA-945GCM-S2L
 +
|Intel 945G + ICH7 Chipset
 +
|
 +
* Install Method: Kalyway 10.5.2 Install DVD then Kalyway 10.5.3 Upgrade then Apple update to 10.5.4
 +
* Audio: Working with Azalia_Out.kext or this driver [[http://www.insanelymac.com/lofiversion/index.php/t109782.html]]
 +
* LAN: Works OOB with default settings on Kalyway 10.5.2 Disk, however after computer wakes from sleep it has no LAN connectivity
 +
* SATA & IDE: Both Working (on all 10.5.2 , 5.3 and 5.4)
 +
* Optical Drive: LG super-multi - works fine
 +
* Shutdown and sleep work but LAN connectivity is lost after waking from sleep
 +
|EFI + Vanilla kernel working
 +
|Everything seems to work OOB. Audio can be improved by using this guys driver[[http://www.insanelymac.com/lofiversion/index.php/t109782.html]]
 +
|-
 
|GA-945GCMX-S2
 
|GA-945GCMX-S2
 
|Intel 945GC + ICH7
 
|Intel 945GC + ICH7
Line 1,745: Line 2,856:
 
|Yes
 
|Yes
 
|No.  Audio and video need patches
 
|No.  Audio and video need patches
 +
|-
 +
|GA-945GCMX-S2
 +
|Intel 945GC + ICH7
 +
|
 +
* BIOS version: F6c
 +
Am using onboard GMA950 video and Celeron D 630.
 +
With Leo4all v3, everything works fine - Patched 9.2.2 Kernel, ALC888, Realtek LAN, GMA950 older version (Resolution Change version), ICHx support
 +
|EFI bootloader untested, due to usage of Celeron D CPU. Minor graphics glitches, mainly related to mouse cursor.
 +
|Yes
 
|-
 
|-
 
|GA-945GZM-S2
 
|GA-945GZM-S2
Line 1,779: Line 2,899:
 
|Unknown
 
|Unknown
 
|-
 
|-
 +
|GA-G31M-S2L
 +
|IntelG31 + ICH7
 +
|
 +
* Install Method: Kalyway 10.5.2 + Kalyway ComboUpdate10.5.3 + OnlineUpdate10.5.4 (all Vanilla)
 +
* BIOS Version: unknown
 +
* Audio: ALC662, works with Taruga's HDA-patcher 1.20 & ALC662.txt from his page
 +
* LAN: not tested (seems to be working OOTB though)
 +
* SATA & IDE: no issues
 +
* Optical Drive: SATA & PATA work
 +
* Shutdown, reboot, sleep work fine
 +
* Onboard-GFX: not tested
 +
* HIGHLY RECOMMENDED!
 +
|YES (EFI_v8 & Vanilla, MBR)
 +
|Sound needs patching
 +
|-
 +
|GA-EG31M-S2 (rev. 1.0)
 +
|IntelG31 + ICH7
 +
|
 +
* Install Method: Boot-132 from Darwin/x86 CD, swap Retail Leopard 10.5.0 disc into drive and install, Software Update to 10.5.5.
 +
* BIOS Version: F2i (beta)
 +
* Audio: ALC888, have not patched yet
 +
* LAN: Realtek 8111C Gbit, tested, works OOTB
 +
* SATA & IDE: using only SATA drives
 +
* Optical Drive: SATA works
 +
* Shutdown works fine; restart requires pressing reset button afterwards (may be issue with installed bluetooth adapter); sleep works fine
 +
* Onboard-GFX: not tested
 +
|Yes
 +
|Sound needs patching
 +
|-=
 
|GA-MA69G-S3H (Socket AM2)
 
|GA-MA69G-S3H (Socket AM2)
 
|AMD 69G & SB600
 
|AMD 69G & SB600
Line 1,784: Line 2,933:
 
* Install Method: Kalyway 10.5.2, AMD patch
 
* Install Method: Kalyway 10.5.2, AMD patch
 
* Bios F6
 
* Bios F6
* Audio: Realtek ALC889A (not tested)
+
* Audio: Realtek ALC889A (works after applying Tauraga patch)
 
* LAN: Realtek RTL8110 GE Ethernet Controller works
 
* LAN: Realtek RTL8110 GE Ethernet Controller works
 
* SATA: works
 
* SATA: works
* IDE: Unknown
+
* IDE: works
* Optical Drive: works with SATA
+
* Optical Drive: works with SATA and IDE
 
* Onboard video does not work
 
* Onboard video does not work
 
|No
 
|No
|Unknown
+
|Only needed to patch Audio with hdapatcher and the txt file from tauraga
 
|-
 
|-
 
|-
 
|-
Line 1,809: Line 2,958:
 
|No, Lan needs patching.
 
|No, Lan needs patching.
 
|-
 
|-
|} . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+
|Ga-p35-s3g(rev1.0)
 +
|P35
 +
|
 +
*Leo4all 10.5.2
 +
*Lan (works out of box)
 +
*5.1 alc662 card works(Only 2.1+Mic works +patch required)
 +
*Gefore 6600gt used 1440*900 at 60Hz.(My monitor supportes upto that only)
 +
*samsung dvd sata works(burn test not done)
 +
*Only Audio need patching all other things work out of Box.
 +
-------
 +
For More info about audio visit
 +
http://forum.insanelymac.com/index.php?showtopic=96725&st=0&p=690751&#entry690751
 +
For another hackintosh user experience
 +
http://forum.insanelymac.com/index.php?showtopic=121031&st=0&p=856502&#entry856502
 +
|Yes(Vanilla Kernel)
 +
|Only Audio need patching.
 +
|-
 +
 
 +
|}  .
  
 
=== Intel ===
 
=== Intel ===
Line 1,819: Line 2,986:
 
!EFI/Vanilla kernel working
 
!EFI/Vanilla kernel working
 
!Fully Working w/o Patch
 
!Fully Working w/o Patch
 +
|-
 +
|Intel DG43NB
 +
|Intel G43 Express Chipset ICH10
 +
|
 +
*Install Method: Kalyway 10.5.2
 +
*Audio (ALC888VC), with Azalia driver found [http://forum.insanelymac.com/index.php?showtopic=123697&pid=916765&mode=threaded&start=#entry916765 here] (remove AppleHDA and HDAenabler kext before installing)
 +
*Video (onboard, didn't worked), i use nVidia Quadro FX1400
 +
*LAN (Intel 82567LV) works with kext for 82566mm found [http://forum.insanelymac.com/index.php?showtopic=128931 here]
 +
*USB (12x) working
 +
*Firewire (2x) working
 +
*IDE working, SATA (6x) working
 +
*4GB DDR2/800 working
 +
*Shutdown, Sleep and Reboot works
 +
*Tested by [http://www.facebook.com/profile.php?id=1343186070&ref=profile Muhammad Anil Babur Kiani]
 +
'''Note: Installed from Sata DVD'''
 +
|Sleep and Kabyl kernel is working
 +
|
 +
|-
 +
|Intel DP43TF
 +
|Intel P43 Express Chipset ICH10
 +
|
 +
*Install Method: iDeneb 10.5.4
 +
*Audio (ALC888VC), with Azalia driver found [http://forum.insanelymac.com/index.php?showtopic=123697&pid=916765&mode=threaded&start=#entry916765 here] (remove AppleHDA and HDAenabler kext before installing)
 +
*Video (no onboard), i use ATI HD3870
 +
*LAN (Intel 82567LV) works with kext for 82566mm found [http://forum.insanelymac.com/index.php?showtopic=128931 here]
 +
*USB (12x) working
 +
*Firewire (2x) working
 +
*IDE working, SATA (6x) working
 +
*8GB DDR2/800 working
 +
*Shutdown, Sleep and Reboot works
 +
 +
'''Note: Installed from Sata DVD'''
 +
|EFI & Vanilla is working
 +
|
 
|-
 
|-
 
|Intel D201GLY2(A)
 
|Intel D201GLY2(A)
Line 1,839: Line 3,040:
 
|Intel® 5400 Express Chipset
 
|Intel® 5400 Express Chipset
 
|
 
|
*Install Method: Kalyway 10.5.2 DVD
+
*Install Method: Kalyway 10.5.2 DVD, then install 10.5.5 update, after that install the driver(s)
*Audio Sigmatel STAC9274D Working with Apple HDA Patcher 1.16 and STAC9274D codec dump available at [http://wiki.taruga.net HERE]
+
*Audio Sigmatel STAC9274D Working with Apple HDA Patcher 1.16 and STAC9274D codec dump available at insanelymac forums
 
*LAN Intel Gigabit Ethernet working out of box
 
*LAN Intel Gigabit Ethernet working out of box
*USB working with Printers, and Microsoft WIreless Desktop 7000 Transceiver. External USB storage either not recognized or EXTREMELY slow transfer speeds
+
*USB working out of box for all ports and all devices
*IDE working, SATA controller working in AHCI mode with kexts from [http://forum.insanelymac.com/index.php?showtopic=95309 HERE] No RAID support yet
+
*FireWire works out of box
*Optical Drive LG GSA-H55LI IDE drive works out of the box
+
*IDE working, SATA controller working in AHCI mode, Native, detected as ESB2 or Unknown AHCI controller
|EFI is working Vanilla not tested
+
*According to the IO Registry, some devices are not working, but everything works fine
|Audio and SATA controller require patching
+
*Optical drives, harddrives, ram and all pci slots work
 +
*Installs from SATA DVD Drive
 +
*2xFW/10xUSB/6xSATA/2xeSATA/1xIDE/Surround Audio/ Socket 771! with 775 cooling mounts / eATX factor
 +
|PC_EFI works, Vanilla does not work (panic), Shutdown/Reboot sometimes hangs (cpu's halted, video off, but power still on)
 +
|Audio controller requires patching
 
|-
 
|-
 
|DP35DP
 
|DP35DP
Line 1,856: Line 3,061:
 
* Onboard LAN does not work (buy a cheap realtek)
 
* Onboard LAN does not work (buy a cheap realtek)
 
* USB, Firewire work out of the box
 
* USB, Firewire work out of the box
* IDE does not work
+
* IDE/ATA does not work
 
* SATA works in IDE Mode
 
* SATA works in IDE Mode
* Optical Drive must be SATA to work and to perform install
+
* Optical Drive must be SATA or ATA to perform install
 +
* To make restart fully work, install 10.5.3 combo update from Kalyway
 
|EFI v8 + Vanilla Kernel Working, Restart and Sleep work
 
|EFI v8 + Vanilla Kernel Working, Restart and Sleep work
 
|Audio requires patching
 
|Audio requires patching
Line 1,865: Line 3,071:
 
|Intel G33
 
|Intel G33
 
|
 
|
* Install method: Kaliway's 10.5.1 DVD + Kalyway's hacked Combo update 10.5.2 and Vanilla Kernel 9.2
+
* Follow this guide
* BIOS Version: DPP3510J.86A.0326
+
* [http://www.insanelymac.com/forum/index.php?showtopic=131281]
* Audio: Works with AppleHDA & ALC888 codec dump (Including BIOS Update [http://downloadmirror.intel.com/15027/eng/DPP3510J.86A.0326.EB.EXE here]from Intel)
+
* Onboard LAN does not work
+
* USB, Firewire work out of the box
+
* IDE works with Patching
+
* SATA works in AHCI Mode
+
 
|EFI v8 + Vanilla Kernel Working
 
|EFI v8 + Vanilla Kernel Working
|Audio and IDE require patching
+
|Audio and IDE require patching, Lan required patching too
 
|-
 
|-
 
|DG33FB
 
|DG33FB
 
|Intel G33
 
|Intel G33
 
|
 
|
* Install method: Kalyway 10.5.2 DVD_Intel_AMD and Vanilla Kernel 9.2
+
* Install method: Kalyway 10.5.2 DVD_Intel_AMD and Vanilla Kernel 9.2. Upgradable to 10.5.5.
 +
* iDeneb does not work. Hangs up at Disk Utility (and if Disk formatted then at Installation)
 
* BIOS Version: DPP3510J.86A.0413
 
* BIOS Version: DPP3510J.86A.0413
 
* Audio: Works with ALC888
 
* Audio: Works with ALC888
Line 1,887: Line 3,089:
 
* SATA works in AHCI & IDE Mode
 
* SATA works in AHCI & IDE Mode
 
* IDE & SATA Optical works, fully iTunes & DVD Player functional
 
* IDE & SATA Optical works, fully iTunes & DVD Player functional
* Onboard Intel GMA3100 graphics works, 1024x768 fixed resolution, not further tested
+
* Onboard Intel GMA3100 graphics mixed result. Works for some at 1024x768 fixed resolution, not further tested. Most likely would not work though!
 
* EVGA Nvidia 7600GT KO - all resolutions, NVinject-256 via Kalyway disc
 
* EVGA Nvidia 7600GT KO - all resolutions, NVinject-256 via Kalyway disc
 
|EFI v8 + Vanilla Kernel Working
 
|EFI v8 + Vanilla Kernel Working
|Audio requires patching. Full sleep/shutdown/restart.  
+
|Audio requires patching. Full sleep/shutdown/restart with Patching.  
 
|-
 
|-
 
|DG33TL
 
|DG33TL
Line 1,940: Line 3,142:
 
|Yes (pc_efi_v8 + pc_efi_v7.4)
 
|Yes (pc_efi_v8 + pc_efi_v7.4)
 
|Sigmatel Audio requires patch
 
|Sigmatel Audio requires patch
 +
 +
|-
 +
|Intel D945GCLF
 +
|Intel® 945GC and ICH7
 +
|
 +
*Install Method: Kalyway 10.5.2 (kernel 9.2.0 + usb patch because System.kext is by default 9.2.2 and should be 9.2.0)
 +
*Integrated Intel® Atom 1.6ghz (HT) processor working (system think it's a Core Solo 1.6ghz)
 +
*Realtek ALC662 audio working (Mic Not working yet)
 +
*Intel Graphics Media Accelerator 950 (QE/CI fully supported. It works like a charm!)
 +
*LAN works, but after sleep losses DHCP connection, suggest to use manual IP as work around.
 +
*Six USB 2.0 ports working
 +
*Two SATA ports and One PATA IDE working
 +
*Sleep works
 +
 +
This is a perfect system! And really cheap (54€)
 +
 +
'''Note:''' Some distributions might not support video resolution over 1280x1024 out of the box.  After patching with a different version of IntegratedFrameBuffer kext, 1680x1050x32 works fine but no 3D support.
 +
|Efi working, Vanilla working
 +
|No patch needed! Everything works out of box
 +
|-
 +
|DQ965GF
 +
|Intel Q965
 +
|
 +
* Install method: Kalyway 10.5.2 DVD_Intel_AMD Upgradable to 10.5.6
 +
* good working without disabler, can use custom DSDT: [http://www.mediafire.com/osxfile (Video, sound, ethernet)]
 +
* BIOS Version: Last
 +
* Audio: Works with [http://forum.insanelymac.com/index.php?&showtopic=134879 patched version STAC9227] (Mic, Line-in works fine)
 +
* Audio(legacy kexts): [http://forum.insanelymac.com/index.php?showtopic=86809 DQ965GF topic]
 +
* Onboard LAN work but not support powermanagement, read [http://www.insanelymac.com/forum/index.php?&showtopic=128931 this] thread
 +
* USB & Firewire work out of the box
 +
* SATA works in AHCI Mode
 +
* Onboard Intel GMA3000 doesnt work, required external videocard
 +
|Chameleon SMBIOS + Vanilla Kernel Working
 +
|Audio requires patching, or use legacy Audio kexts
 +
|-
 +
|Intel D945GCLF2
 +
|Intel® 945GC and ICH7
 +
|
 +
*Install Method: Kalyway 10.5.2
 +
*At the installation window, Select customize. Under Intel_GMA, select GMA950 only. ( without this selection, you get 1024 x768 only).
 +
*S-video out works at 800x600 only with default Leopard kexts.  Do not select GMA950 in the Kalyway installer or S-Video will be solid black or blue screen.
 +
*Integrated Intel® Dual-Core Atom 1.6GHz (HT) Processor (System reports it as Core Duo @ 1.6GHz)
 +
*Realtek ALC662 audio working (Mic not working yet)
 +
*Intel Graphics Media Accelerator 950 (QE/CI fully supported)
 +
*Gigabit LAN
 +
*Six USB 2.0 ports working
 +
*Two SATA ports and One PATA IDE working
 +
*Sleep works
 +
 +
This is a perfect dual core system! Motherboard was $90 CAD.
 +
 +
|Efi working, Vanilla working
 +
|No patch needed! Everything works out of box
 +
|-
 +
 +
 
|-
 
|-
 
|Intel D945GNT
 
|Intel D945GNT
Line 2,033: Line 3,291:
 
|PC-EFI
 
|PC-EFI
 
|Audio Needs Patching
 
|Audio Needs Patching
|-
 
 
|-  
 
|-  
 
|Intel DG31PR
 
|Intel DG31PR
Line 2,047: Line 3,304:
 
|Yes, Yes
 
|Yes, Yes
 
|Audio requires patching. Kalaway/iatkos req. the gparted method and wouldn't work with a partitioned disk but leo4all will.
 
|Audio requires patching. Kalaway/iatkos req. the gparted method and wouldn't work with a partitioned disk but leo4all will.
 
 
|-
 
|-
 
|DG31PR
 
|DG31PR
Line 2,060: Line 3,316:
 
| EFI v8 and Vanilla kernell working.
 
| EFI v8 and Vanilla kernell working.
 
| Audio needs tweaking, use the AppleHDA patcher v1.20, with [http://psykopat.free.fr/apple/AppleHDA/realtek/alc888.txt this] file.
 
| Audio needs tweaking, use the AppleHDA patcher v1.20, with [http://psykopat.free.fr/apple/AppleHDA/realtek/alc888.txt this] file.
 +
|-
 +
|DG31PR
 +
|Intel G31
 
|
 
|
|- . . . . . . . . . .
+
* Install Method: Kalyway 10.5.2
|} . . . . . . . . . . . . . . . . . . . . . .
+
* Audio: OOB main out, full op on patch mentioned above
 +
* Lan: OOB
 +
* SATA & IDE: OOB
 +
* Shutdown, sleep and reboot: OOB
 +
* Other Details: Bought this MB on account of two reviews above, very pleased indeed :) cheap and powerful.  Onboard graphics makes for a nasty CPU fanspeed and temperature, recommend separate graphics (o/b graphics untested for full boot). System profiler shows PentiumD 3.2GhZ as 100MhZ and bus speed 3.2GhZ but this is just some random glitch, benchmarks show good performance.  Up and running with no problems for over a week now.
 +
| Vanilla kernel tested fine
 +
| Easy audio patch (as above) - main audio out works OOB
 +
|-
 +
|DG31PR
 +
|Intel G31 Chipset
 +
|
 +
* Install Method: Kalyway 10.5.2
 +
* Audio: OOB main out, Select Apple HDA during installation
 +
* Lan: OOB
 +
* SATA & IDE: OOB
 +
* Shutdown, sleep and reboot: OOB
 +
* Graphics: Nvidia XFX 8500 GT(512MB) - Works with Nvinject 512 selected during installation
 +
* Other Details: System profiler shows Core 2 Duo (Wolfdale)  2.66Ghz as 2.66GhZ Unknown and bus speed 3.2GhZ , yet benchmarks show grea performance and in most tests out-beating results of Mac Pro.  
 +
| Vanilla kernel works perfectly
 +
| Everything works OOB (Be sure u selected right audio/graphics drivers when installing)
 +
|-
 +
|Intel® Desktop Board DQ35JO
 +
|Intel® Q35 Express Chipset
 +
|
 +
* Install Method: Kalyway 10.5.2 DVD
 +
* BIOS Version: JOQ3510J.86A.0559.2007.0726.0425
 +
* Audio: Realtec ALC268, use/select AppleAzalia audio driver in the installer.
 +
* Lan: Intel® 82566DM Gigabit Ethernet Controller, currently NOT working.
 +
* SATA & IDE: Both are working fine OOB.
 +
* Shutdown, sleep and reboot: Working fine except sleep. But this (sleep) may depend on what you attached to your motherboard.
 +
| EFI v8 and Vanilla kernell working.
 +
| Audio needs tweaking, use ALC268 driver from [http://forum.insanelymac.com/index.php?showtopic=32859 AppleHDA Solution].
 +
|-
 +
|D865PERL (no LAN)
 +
|Chipset (865PE and ICH5)
 +
|
 +
* Install Method: Kalyway 10.5.2, Software update through to 10.5.5 w/ CPUPowerManagement disable hacks
 +
* Audio: SoundMax Integrated Audio (included in DVD)
 +
* LAN: D-Link DFE-530TX+ (works OOB)
 +
* SATA & IDE: SATA and IDE work. IDE recognized as ATA Bus
 +
* Optical Drive: LiteOn DVD Reader: Works OOB...BenQ Dual Layer DVD Burner: Works OOB...burns DL and DVDs
 +
* GeForce 6600 AGP work using NVkush or NVinject 0.2.1
 +
* Shutdown, Restart and Sleep work
 +
* Other Details:
 +
|PC-EFI work, Vanilla doesnt
 +
|-
 +
|DG35EC
 +
|Chipset (G35)
 +
|
 +
* Install Method: Kalyway 10.5.2
 +
* Audio: Realtek 888S does not (yet) work, but have hope
 +
* LAN: Integrated Gbit; working with com.tootoosoft.driver.Intel82566MM driver and DeviceID hack
 +
* SATA & IDE: SATA and IDE work, installed as AHCI
 +
* GeForce 6600 PCIe works with EFIStudio injection
 +
* Shutdown, Restart and Sleep work
 +
* Other Details:
 +
| EFI v8 and Vanilla kernell working.
 +
|888S Audio needs work
 +
|-
 +
|DG965RYCK
 +
|Chipset (G965) with nvidia quadrofx 1400
 +
|
 +
* Install Method: Kalyway 10.5.2 on Pentium 4 3.2 GHz (Prescot)
 +
* Audio: does not work, fulfilled with Creative soundblaster live with patch at found [http://download.kxproject.lugosoft.com/downloads/kXAudioDriver-1.1b0.dmg www.insanelymac.com]
 +
* LAN: Integrated Gbit; didn't work, 3com external tx905c
 +
* SATA & IDE: SATA and IDE work, installed as AHCI
 +
* Shutdown, Restart and Sleep work
 +
* Other Details: Unsupported Core 2 duo E7300 created a conflict that was resolved by downgrading the processor to E6600.
 +
* Tested by Muhammad Anil Babur Kiani
 +
| EFI v8 and sleep, Vanilla, modbin kernell working.
 +
| Samsung LCD syncmaster auto profile.
 +
|}
  
 
=== Jetway===
 
=== Jetway===
Line 2,078: Line 3,408:
 
* Install Method: Kalyway 10.5.1 Installed and Update to Kalyway Hack 10.5.2 Combo Update
 
* Install Method: Kalyway 10.5.1 Installed and Update to Kalyway Hack 10.5.2 Combo Update
 
* BIOS Version:; BIOS Revision A03
 
* BIOS Version:; BIOS Revision A03
* Audio: Onboard Realtek ALC883 Works out of the Box (Audio out and Mic in)
+
* Audio: Onboard Realtek ALC883 Needs patching in order to work, after patching it will work!
 
* LAN: Realtek 8100C Works out of the Box detected as Realtek 8139
 
* LAN: Realtek 8100C Works out of the Box detected as Realtek 8139
 
* SATA & IDE: SATA and IDE Works out of the Box
 
* SATA & IDE: SATA and IDE Works out of the Box
 +
* Very perfect motherboard for a hackintosh, Using Core 2 Duo E4300 1.8GHz Pretty fast for Leopard! Like a real mac! =) and very cheap motherboard too!
 
|Works Perfectly
 
|Works Perfectly
 
|Yes
 
|Yes
 
|-
 
|-
|} . .
+
|}.
  
 
=== MSI ===
 
=== MSI ===
Line 2,094: Line 3,425:
 
!EFI/Vanilla kernel working
 
!EFI/Vanilla kernel working
 
!Fully Working w/o Patch
 
!Fully Working w/o Patch
 +
|-
 +
|G31TM-P21 Micro ATX
 +
|Intel G31 Express Chipset
 +
|Method: Kalyway 10.5.2 DVD Intel AMD / Leo4All 10.5.2 / iATKOS V7 with Chameleon V2 and V1
 +
*Intel C2D E7900 @2.93ghz and 2 Gb PC2 5300 DDR
 +
*Fails on all flavors
 +
*Better results after removing ATi Radeon 3870 - But still fails
 +
|Voodoo 9.5 and Voodoo 9.7 + Seatbelt Fix are the only ones I remember, I tried 8 hours worth of combinations
 +
|NO - This entry is for anyone trying to use OSX86 on this type of Motherboard, the BIOS is too limited in options to allow you to boot into any flavor of OSX.  It will boot off cd, and install, partition...etc..but will not work. DOES NOT WORK , for example here: [http://www.youtube.com/watch?v=lkQBt-4wvQM]
 
|-
 
|-
 
|P35 Neo-F
 
|P35 Neo-F
|Intel® P35 Chipset/Intel® ICH9 Chipset
+
|P35 / ICH9
 
|
 
|
* '''This Board Does not work with Standard BIOS from MSI!!!'''
+
* board does not work with standard BIOS from MSI
 
* I was lucky to find someone who did the trick and now have it running with a moded BIOS
 
* I was lucky to find someone who did the trick and now have it running with a moded BIOS
 
* You can find the moded BIOS here: [http://rapidshare.com/files/107426218/MSI_P35_Neo_7360v17_mod.zip.html]
 
* You can find the moded BIOS here: [http://rapidshare.com/files/107426218/MSI_P35_Neo_7360v17_mod.zip.html]
Line 2,110: Line 3,450:
 
|No patches needed
 
|No patches needed
 
|-
 
|-
|K9N Platinum
+
 
|Nvidia nForce 570 Chipset
+
|915PL Neo-V
 +
|915PL
 
|
 
|
* Install Method: Kalyway 10.5.2 With AMD Patches, Realtech Audio Drivers, USB-Ehci fix on insanelymac forum.
+
* Install Method: Kalyway 10.5.2 DVD
* Onboard Audio: Works with kalyway included drivers
+
*BIOS Version: latest;
* USB: Works with USB-Ehci kext replacement (you can find it on: insanelymac forum.)
+
*Revision: Unknown
 +
*LAN: works without problem
 +
*Audio: Works with kalyway out-of-box
 +
*USB: works perfectly
 +
*SATA: Works
 +
*IDE: Works
 +
|
 +
|
 +
|-
 +
|945PL Neo
 +
|945PL / ICH7
 +
|
 +
* Install Method: Iatkos 5i
 +
* BIOS Version: Stock
 +
* Revision: Unknown
 +
* LAN: Appears to work, but not tested.
 +
* Audio: Works with patch: [http://forum.insanelymac.com/index.php?showtopic=142666]
 +
* USB: Works for front ports and 2 out of 4 rear ports.
 
* SATA: Works
 
* SATA: Works
 
* IDE: Works
 
* IDE: Works
 +
| EFI Works, used Voodoo kernel.
 +
| No, needs patch for audio.
 +
|-
 +
|K9N Diamond (MS-7226)
 +
|nForce 590 SLI / MCP61
 +
|
 +
*Install Method: Leo4All v.3 with amd pathches
 +
*Install method Leo4all v.3
 +
*Installed using 9.2.0 kernel by netkas
 +
*BIOS version: 1.8
 +
*Revision: A2
 +
*Lan: works 100% with forcedeth(included in leo4all)
 +
*Audio: doesnt work anyway(Creative SB live! 24bit)
 +
*USB: workin OOB
 +
*SATA: works
 +
*IDE: works
 +
*Fireware: works OOB
 +
|Vanilla kernel not tested
 +
|no, audio need drivers
 +
|-
 +
|K9N Platinum
 +
|nForce 570
 +
|
 +
* Install Method: Kalyway 10.5.2 With AMD Patches, Realtech Audio Drivers, USB-Ehci fix on insanelymac forum.
 +
*Install Method: Kalyway 10.5.1 & Combo Update.
 +
*Installed using Vanilla Kernel, and EFI Complete Install and Reboot Use -x on first boot Setup First boot in safemode.
 +
*BIOS Version: Unknown;
 +
*Revision: Unknown
 +
*LAN: unknown
 +
*Audio: Works with kalyway included drivers
 +
*USB: Works with USB-Ehci kext replacement (you can find it on: insanelymac forum.)
 +
*SATA: Works
 +
*IDE: Works
 
|EFI+Vanilla Works
 
|EFI+Vanilla Works
 
|Kalyways included AMD Patches, Realtech audio drivers & USB-EHCI Fix on insanelymac forum.
 
|Kalyways included AMD Patches, Realtech audio drivers & USB-EHCI Fix on insanelymac forum.
 
|-
 
|-
|
+
|P35 NEO 3-F
MSI P35 NEO 3-F
+
 
|Intel P35 / ICH9
 
|Intel P35 / ICH9
| Install method: Kalyway 10.5.2
+
|
* BIOS AMI version 1.12
+
* Install method: Kalyway 10.5.2
* works only with SEE2-Patch
+
* BIOS AMI version 1.12
* Audio ALC888 does not work
+
* works only with SEE2-Patch
* Ethernet RTL8111 works with RTL1000-Patch
+
* Audio ALC888 does not work
* USB works
+
* Ethernet RTL8111 works with RTL1000-Patch
* SATA works
+
* USB works
* Grafik ATI Radeon HD2600 PCIE works with ATI-Patch
+
* SATA works
* IDE not tested
+
* Video ATI Radeon HD2600 PCIE works with ATI-Patch
 +
* IDE not tested
 
|EFI+Vanilla working with E6750
 
|EFI+Vanilla working with E6750
 
|Patches for Audio, SEE2 support, ATI and Ethernet needed
 
|Patches for Audio, SEE2 support, ATI and Ethernet needed
 +
|-
 +
|P45 NEO 3-F
 +
|Intel P45 / ICH10
 +
|
 +
* Install method: Kalyway 10.5.2
 +
* BIOS AMI version 1.12
 +
* works only with JAS1048SSE2 selected
 +
* Audio ALC888 works with AppleHDA.kext and HDAPatcher.kext
 +
* Ethernet RTL8111 works out of the box
 +
* USB works
 +
* SATA working with AHCI and APIC selected in BIOS
 +
* Video Galaxy GeForce 9500 GT displays all resolutions but no QE using guide: [http://www.insanelymac.com/forum/lofiversion/index.php/t139775.html]
 +
* IDE working
 +
|Vanilla working
 +
|Patches for Galaxy GeForce 9500 GT needed
 
|-
 
|-
 
|P965 Neo2 -FI
 
|P965 Neo2 -FI
|Intel® P965 Chipset/Intel® ICH8 Chipset
+
|P965 / ICH8
 
|
 
|
 
* Install Method: Leo4All 10.5.2 vanilla, EFI MBR
 
* Install Method: Leo4All 10.5.2 vanilla, EFI MBR
Line 2,147: Line 3,553:
 
|-
 
|-
 
|P965 Neo2(-FI)
 
|P965 Neo2(-FI)
|Intel 965/ICH8 Chipset
+
|965 / ICH8
 
|
 
|
 
* Install Method: Kalyway 10.5.1 EFI Guid (updated to vanilla 10.5.2
 
* Install Method: Kalyway 10.5.1 EFI Guid (updated to vanilla 10.5.2
Line 2,158: Line 3,564:
 
|-
 
|-
 
|P965 Neo
 
|P965 Neo
|Intel 965 Chipset with ICH8 Southbridge
+
|965 / ICH8
 
|
 
|
 
* Install Method: Kalyway 10.5.1 Efi Guid or MBR
 
* Install Method: Kalyway 10.5.1 Efi Guid or MBR
Line 2,164: Line 3,570:
 
* BIOS Ver: Latest
 
* BIOS Ver: Latest
 
* LAN (Realtek 8110SC) Works out of the box
 
* LAN (Realtek 8110SC) Works out of the box
* No IDE support (Because of JMicron Chip) '''All drives should be sata''', '''All IDE should be empty'''. IDE DVD in USB external Box return /com.apple.Boot error.
+
* No IDE support (Because of JMicron Chip) All drives should be sata, All IDE should be empty. IDE DVD in USB external Box return /com.apple.Boot error.
* '''Disable Lan Option ROM from BIOS settings'''
+
* Disable Lan Option ROM from BIOS settings
 
|EFI working, Vanilla unknown
 
|EFI working, Vanilla unknown
 
|No, Everything works, except audio needs ALC883 driver from Kalyway DVD
 
|No, Everything works, except audio needs ALC883 driver from Kalyway DVD
 
|-
 
|-
 
|975X Platinum Power Up
 
|975X Platinum Power Up
|Intel® i975 Chipset/Intel® ICH8 Chipset
+
|965 / ICH8
 
|
 
|
 
* Install Method: iatkos v1.0i + Kallyway 10.5.2 Update - vanilla, EFI MBR
 
* Install Method: iatkos v1.0i + Kallyway 10.5.2 Update - vanilla, EFI MBR
 
* Onboard audio working  
 
* Onboard audio working  
 
* LAN, SATA, IDE work
 
* LAN, SATA, IDE work
|-
 
 
|-
 
|-
 
|945GM3-F
 
|945GM3-F
|Intel 945 & ICH7
+
|945 / ICH7
 
|
 
|
 
* Install Method: Kalyway & vanila_acpi_fix
 
* Install Method: Kalyway & vanila_acpi_fix
Line 2,187: Line 3,592:
 
|Unknown
 
|Unknown
 
|Audio needs patching
 
|Audio needs patching
|-
 
 
|-
 
|-
 
|P965 Platinum(-FI)
 
|P965 Platinum(-FI)
|Intel 965/ICH8 Chipset
+
|965 / ICH8
 
|
 
|
 
* Install Method: Kalyway 10.5.1 EFI Guid (updated to vanilla 10.5.2
 
* Install Method: Kalyway 10.5.1 EFI Guid (updated to vanilla 10.5.2
Line 2,207: Line 3,611:
 
|-
 
|-
 
|K9N SLI-2F
 
|K9N SLI-2F
|NVIDIA nForce 570 SLI MCP Chipset
+
|nForce 570 SLI MCP  
 
|
 
|
 
* Install Method: Zephyroth 10.5.2 Install DVD
 
* Install Method: Zephyroth 10.5.2 Install DVD
Line 2,219: Line 3,623:
 
|-
 
|-
 
|K9N6SGM-V
 
|K9N6SGM-V
|NVIDIA MCP61 (nForce 4 & 6100 video)
+
|MCP61 (nForce 4 & 6100 video)
 
|
 
|
 
* Install Method: Zephyroth 10.5.2 for AMD
 
* Install Method: Zephyroth 10.5.2 for AMD
Line 2,231: Line 3,635:
 
|Audio needs patch, LAN doesn't work
 
|Audio needs patch, LAN doesn't work
 
|-
 
|-
|MSI K8N NEO4 FI  
+
|K8N NEO4 FI  
|NVDIA NFORCE4
+
|NFORCE4
 
|   
 
|   
 
* Install method Leo4Allv2 Kernel during installation
 
* Install method Leo4Allv2 Kernel during installation
 
* BIOS unknown
 
* BIOS unknown
 
|NETKAS
 
|NETKAS
|Need no Patches everything works   
+
|Need no Patches everything works
 +
|-
 +
|P6N Diamond
 +
|680i
 +
|
 +
* Install Method: Kalyway 10.5.2 Intel DVD (TPB)
 +
* BIOS Version: v1.3; Revision: Unknown
 +
* Audio: On-board Creative X-Fi xtreme audio DOES NOT WORK WHAT-SO-EVER. USB Audio, like a headset, will work though.
 +
* LAN: On-board LAN, works with driver "forcedeth". Has some issues when dual-booting with Windows Vista.
 +
* SATA & IDE: Everything works perfectly. Just make sure if you dual/triple-boot to shutdown your other OS's completely or OSX cannot read. I use Ext2FS for my Linux partition and NTFS-3g for my Vista partition. All work fine.
 +
* Optical Drive: SONY DVD-RW DRU-540A. Works fine.
 +
* Do shutdown, reboot and sleep work? Yes, have not tested sleep.
 +
* Sleep, Speedstep, nForce, and Modbin kernels all work. Vanilla and kabyl kernels do not work.
 +
|PC-EFI works. Vanilla Kernel does not.
 +
|No patching required.  
 +
|-
 +
|P6N SLI
 +
|nVidia 650i
 +
|
 +
* Install Method: Kalyway 10.5.2 Intel/AMD DVD
 +
* BIOS Version: v2.2; Revision: 06/18/2007
 +
* Audio: On-board nForce Audio ALC888 Codec works like a charm OTB
 +
* LAN: On-board LAN cannot receive data, not working. Tried with up-to-date "forcedeth".
 +
* SATA & IDE: Everything works perfectly. Installed to IDE just to make sure. Couldn't install from SATA DVD drive but maybe that was because I used a DVD+RW
 +
* Optical Drive: SATA works fine
 +
* External Firewire drives work fine.
 +
* Low-speed USB mice and wacom tablets work fine.
 +
* High-speed USB devices (ex: external drives) need patch (see notes)
 +
* Do shutdown, reboot and sleep work? Yes, have not tested sleep. Update: sleep doesn't work.
 +
* I use the nforce kernel, haven't tried the others.
 +
|PC-EFI works. Vanilla Kernel does not.
 +
|
 +
* Make sure the vanilla kernel option is UNchecked during the install.
 +
* High-speed USB devices do not work. You need to install the "usb_fix_1.3.mpkg.zip" from [http://forum.insanelymac.com/index.php?showtopic=95789&st) here]
 +
* No patching required. You _have_to use BIOS version 2.2 though. 2.1 will force you to use cpus=1, 2.5 (the latest) would hang the kernel at the memory prompt.
 +
* For those who want to update to 10.5.3, the "JaS 10.5.3 combo update" worked like a charm, the "kalyway 10.5.3 comboupdate" crashed and messed-up the OS.
 
|-
 
|-
 
|Neo2-Digital K9AG
 
|Neo2-Digital K9AG
Line 2,252: Line 3,691:
 
|Audio needs patching
 
|Audio needs patching
 
|-
 
|-
|}. . . . . . . . . . . . . . . . . . . .
+
|G31M2
 +
|Intel IG31 ICH7
 +
|
 +
* Install Method: Leopard Retail + Updated to 10.5.3
 +
* Bios Version: 7383v52 [http://osrom.net/biosmod/ here]
 +
* Audio: Realtek ALC888 Works with AppleAzaliaAudio
 +
* LAN: Realtek RTL8111B Works OOB
 +
* STATA & IDE: Works OOB
 +
* Optical Drive: Pioneer DVR-213NP SATA
 +
* VGA: Used nVidia GeForce 7600GT PCIe (gfxutil efi mode)
 +
* Shutdown & Reboot work, Sleep not working
 +
|PCEFI & Vanilla Kernel
 +
|Audio needs AppleAzaliaAudio
 +
|-
 +
|MS-7058
 +
|Intel i915P/i915G
 +
|
 +
* Install Method: Kalyway 10.5.2 Intel DVD
 +
* Bios Version: 1.9B0
 +
* Audio: CMedia 9880
 +
* LAN: Marvell Yukon 88E053 PCI-E Gigabit Ethernet Controler
 +
* STATA & IDE: Works.
 +
* VGA: Used nVidia GeForce 6600 PCIe
 +
|Sleep Kernel
 +
|Audio: Works with default drivers (Azalia High Definition)
 +
|-
 +
|MSI PM8PM -V
 +
|VIA
 +
|
 +
*Install Method: Kalway 10.5.2 Intel/AMD
 +
*Install methodKalway 10.5.2
 +
*Installed using 9.2.0 kernel by netkas (sleep )
 +
*BIOS version: Latest
 +
*Revision: Latest
 +
*Lan: need pacthes
 +
*Audio: Work OOTB(line-in spdif mic: work )
 +
*USB: working b4 boot ( need usbfix )
 +
*SATA: works ( select all chipset )
 +
*IDE: works
 +
*Fireware: none
 +
|Vanilla kernel not tested ( using sleep kernel )
 +
|Yes ( 2.1 channel )
 +
|-
 +
|MSI PM8PM -V
 +
|VIA P4M800Pro / VT8237R plus
 +
|
 +
*HARDWARE USED
 +
*Pentium 4 3.0GHz
 +
*Memory: 1Gb DDR2
 +
*Video : S3 UniChrome Pro IGP 64mb on board
 +
*Keyboard and mouse: USB both
 +
*HDD : IDE
 +
*Install Method: Kalway 10.5.2 Intel/AMD
 +
*Installed using 9.2.0 kernel sleep
 +
*SATA,IDE,AUDIO: Use appleVIAATA in DVD
 +
*Lan: need external kext, use viarhine_rel.tar.gz from [http://www.insanelymac.com/forum/index.php?act=attach&type=post&id=24623 here]
 +
*Audio:to fix mono audio use AppleAC97Audio.zip from [http://www.insanelymac.com/forum/index.php?act=attach&type=post&id=2367 here]
 +
*USB: use USBfix on DVD
 +
*Fireware: none
 +
|Vanilla kernel doesn't work
 +
|
 +
*Audio: works
 +
*Lan: works
 +
*Everything works great!!
 +
*Video resolution 1280x1024 just edit com.apple.Boot.plist , No acceleration en 2D and 3D and other skills cause S3 UniChrome Pro IGP driver doesn't have support on Mac,by default kalyway use VESA generic drivers =(
 +
|} .
 +
 
 +
=== Shuttle ===
 +
 
 +
 
 +
{| class="wikitable" width="100%"
 +
!Hardware Name
 +
!Chipset
 +
!Notes
 +
!EFI/Vanilla kernel working
 +
!Fully Working w/o Patch
 +
|-
 +
|Shuttle XPC SD30G2 Plus
 +
|Intel 945GC/ICH7
 +
|
 +
* Install Method: Kalyway 10.5.2
 +
* BIOS Version: Unknown
 +
* Audio: Fully Supported (Audio Output Only)
 +
* LAN: Fully Supported 10/100/1000 (Marvell Kalyway Driver)
 +
* SATA & IDE: Both Fully Supported (No JMicron Here)
 +
* USB: Fully Supported (All Six Ports)
 +
* Firewire: Fully Supported (Front & Rear)
 +
* Restart, Shutdown, Sleep Fully Supported with ToH Sleep Kernel
 +
|PC-EFI works
 +
|Needs Replacement AppleFrameBuffer Kext for QE/CI and Resolution Change with Intel GMA 950 Graphics
 +
|-
 +
|Shuttle XPC Prima SP35P2V2
 +
|Intel P35/ICH9R
 +
|
 +
* Install Method: iDeneb
 +
* BIOS Version: Stock
 +
* Audio: Fully Supported OOB (Analog and Optical with 5.1)
 +
* LAN: Fully Supported 10/100/1000 (AppleYukon2)
 +
* SATA & IDE: Both Fully Supported (IDE with jmicron)
 +
* USB: All ports fully operational
 +
* Restart and shutdown both seem to work perfectly.
 +
* Graphics: nVidia eVGA 8600 GT 256MB (256-P2-N751-TR) pci-e works perfectly with nvkush from iDeneb disc.
 +
* SATA controller using Legacy mode and ACHI.  iDeneb 10.5.5 works perfectly OOB.
 +
|Using vanilla kernel & Chameleon
 +
|Yes
 +
|}  .
  
 
=== Supermicro ===
 
=== Supermicro ===
Line 2,317: Line 3,861:
 
* Use kexthelper to get that usb kext installed. also google "time machine fix"
 
* Use kexthelper to get that usb kext installed. also google "time machine fix"
 
|EFI & Vanilla Kernel works
 
|EFI & Vanilla Kernel works
|} . . . . . . . . . . . . . . .
+
|
 +
|}
 +
 
 +
=== TYAN ===
 +
 
 +
 
 +
{| class="wikitable" width="100%"
 +
!Hardware Name
 +
!Chipset
 +
!Notes
 +
!EFI/Vanilla kernel working
 +
!Fully Working w/o Patch
 +
|-
 +
|i5000XT S2696WA2NRF
 +
|Intel 5000X
 +
|
 +
* Install Method: Leo4All v3 10.5.2
 +
* SATA HDD accidentally formatted with Apple Partition Table so system boots only with DVD.  
 +
* Audio: fully working with ALC888 patch from Leo4All v3
 +
* LAN: Both ports fully working without any patches
 +
* SATA-2: Works OOB
 +
* SAS: Works with SAS Chipset driver from Leo4All v3
 +
* About this Mac patch for Sysinfo.
 +
* 1 x Firewire (front header) works
 +
* 8 x USB works
 +
* you will need a PS/2 keyboard for typing boot options.
 +
* Conclusion: rock solid ProSystem with a Quad Clovertown Xeon, runs all Pro apps flawlessly!
 +
|PC-EFI not working, boots HDD system with Darwin from DVD
 +
|Audio needs patching, SAS-Driver has to be added
 +
|} . . . . .
 +
 
 +
 
 +
=== XFX nForce Series===
 +
 
 +
 
 +
{| class="wikitable" width="100%"
 +
!Hardware Name
 +
!Chipset
 +
!Notes
 +
!EFI/Vanilla kernel working
 +
!Fully Working w/o Patch
 +
|-
 +
|nForce 780i 3-Way SLI
 +
|ICH9 (I think)
 +
|
 +
* Install Instructions:
 +
*# Formatted HFS+ and then partitioned 300GB into Mac OS X Extended (Journaled) and 200GB into FAT (for Windows later)
 +
*# Installed using Vanilla Kernel, and using both Natit and NVInject kexts...display works fine in 1440x900 and other resolutions
 +
*# Complete Install and Reboot
 +
*# Once you reboot, go into Bios and disable second CPU core (or it will be unstable and freeze under heavy loads)
 +
*# If you are having root device not found issues or install can't find the HD to install on (SATA), make sure your eSATA is turned on for device 0.  Interesting tip, don't plug the SATA plug into the 4 plugs by the graphics card, it has to be in the top plug on the 2 SATA plugs facing verticle out the front of the machine (if that makes any sense)
 +
*# Use -v on first boot if you want, but it was not necessary for me.
 +
Get kexthelperB7 to install kexts from [http://cheetha.net/ here] if you want to try and get the Lan working or fix the 1 channel audio.  This was just an impatient test to see if it would work.  I have a Asus P5B coming in that will hopefully work OOB with minor difficulties. 
 +
|Yes
 +
|Audio needs patching if you want more than 1 channel, LAN needs patching
 +
|- . . .
 +
|} . . . . . . . . . . . .
  
 
==Processors==
 
==Processors==
Line 2,328: Line 3,928:
 
! Recognized as
 
! Recognized as
 
! Fully Working w/o Patch
 
! Fully Working w/o Patch
 +
|-
 +
|AMD Sempron LE-1100 Socket AM2
 +
|Working
 +
|1.9 GHz Unknown
 +
|Yes
 
|-
 
|-
 
|AMD Sempron 3000+ Socket 754
 
|AMD Sempron 3000+ Socket 754
Line 2,357: Line 3,962:
 
|Working
 
|Working
 
|AMD Athlon™ 64 Processor 3500+
 
|AMD Athlon™ 64 Processor 3500+
 +
|Yes
 +
|-
 +
|AMD Athlon 64 3700+ Socket 754
 +
|Working
 +
|2.4 GHz Unknown
 +
|Yes
 +
|-
 +
|AMD Athlon 64 X2 3600+ (90nm , Windsor)
 +
|Working
 +
|2 GHz AMD Athlon™ 64 X2 Dual Core Processor 3600+
 
|Yes
 
|Yes
 
|-
 
|-
Line 2,373: Line 3,988:
 
|2.1 GHz Unknown
 
|2.1 GHz Unknown
 
|Yes
 
|Yes
 +
|-
 +
|AMD Athlon 64 X2 4000+
 +
|
 +
|Intel Core 2 Duo 3.7GHz
 +
|[http://code.google.com/p/xnu-dev/v[Voodoo Kernel v1 Rev A]]
 
|-
 
|-
 
|AMD Athlon 64 X2 4200+
 
|AMD Athlon 64 X2 4200+
Line 2,392: Line 4,012:
 
|Working
 
|Working
 
|2.5 GHz Unknown
 
|2.5 GHz Unknown
 +
|Yes
 +
|-
 +
|AMD Athlon 64 X2 4850e+
 +
|Working
 +
|2.5 GHz Unknown
 +
|Yes
 +
|-
 +
|AMD Athlon 64 X2 5000+ Black Edition (Socket AM2)
 +
|Working
 +
|2.6 GHz Unknown
 
|Yes
 
|Yes
 
|-
 
|-
Line 2,418: Line 4,048:
 
|AMD Athlon 64 X2 6400+  
 
|AMD Athlon 64 X2 6400+  
 
|Working
 
|Working
|2.01 Ghz Unknown
+
|2.01 GHz Unknown
 
|Yes
 
|Yes
 
|-
 
|-
|} . . . . . . . . .
+
|AMD Athlon 64 II x2 220
 +
|Working with Maverick 10.9 (test on Niresh's 10.9)
 +
|2.8 GHz
 +
|Yes, with keys (amd, arch=x86_64, npci=0x2000, another keys look at your computer)
 +
|-
 +
|AMD Athlon 64 LE1620 Socket AM2
 +
|Working
 +
|2.6 GHz
 +
|Yes
 +
|-
 +
|AMD Turion 64 X2 TL-50
 +
|Working with AMD fix with iDeneb v1 and Leo4All v4.1 for the HP dv6000 and some dv9000 series notebooks. Others may work as well.
 +
|1.6 GHz AMD Turion 64 X2 Mobile Technology TL-50
 +
|Yes, with "AMD fix" selected during install
 +
|-
 +
|AMD Phenom X4 9550
 +
|FULLY WORKING with AMD fix with iDeneb v1.3
 +
|-
 +
|}
  
 
===Intel===
 
===Intel===
Line 2,434: Line 4,082:
 
|Working
 
|Working
 
|2.4GHz Unknown
 
|2.4GHz Unknown
 +
|Yes
 +
|-
 +
|Intel Celeron D 346
 +
|Working
 +
|3,06GHz Unknown
 +
|Yes
 +
|-
 +
|Intel Celeron D 336
 +
|Working
 +
|2.8 GHz Unknown
 
|Yes
 
|Yes
 
|-
 
|-
Line 2,439: Line 4,097:
 
|Working
 
|Working
 
|1.6GHz Unknown
 
|1.6GHz Unknown
 +
|Yes
 +
|-
 +
|Intel Celeron 430
 +
|Working
 +
|1.8 GHz Intel Core Solo
 +
|Yes
 +
|-
 +
|Intel Celeron M420
 +
|Working
 +
|1.6 GHz Unknown
 +
|Yes
 +
|-
 +
|Intel Celeron D 350
 +
|Working
 +
|2.8 GHz Unknown
 
|Yes
 
|Yes
 
|-
 
|-
Line 2,445: Line 4,118:
 
|Intel 2.8Ghz Unknown
 
|Intel 2.8Ghz Unknown
 
|Yes
 
|Yes
 +
|-
 +
|Intel Pentium 4 Prescott 3.0GHz HT
 +
|Working
 +
|3.0GHz Unknown
 +
|Yes
 +
|-
 
|-
 
|-
 
|Pentium® 4 630 (Prescott)
 
|Pentium® 4 630 (Prescott)
Line 2,450: Line 4,129:
 
|Unknown
 
|Unknown
 
|Yes (ToH kernel)
 
|Yes (ToH kernel)
 +
|-
 +
|Intel Pentium 4 540 (Prescott)
 +
|Working
 +
|3.2GHz Unknown
 +
|Yes
 
|-
 
|-
 
|Intel Pentium 4 HT
 
|Intel Pentium 4 HT
Line 2,465: Line 4,149:
 
|3.6GHz Unknown
 
|3.6GHz Unknown
 
|Yes
 
|Yes
 +
|-
 +
|Intel Pentium 4 660 3.60GHz
 +
|Working
 +
|3.6 GHz
 +
|Yes (Kalyway_10.5.2; kernel_9.2_speedstep)
 
|-
 
|-
 
|Intel Pentium D 2.8GHz
 
|Intel Pentium D 2.8GHz
Line 2,524: Line 4,213:
 
|Working
 
|Working
 
|1.8 GHz Intel Core 2 Duo
 
|1.8 GHz Intel Core 2 Duo
 +
|Yes
 +
|-
 +
|Pentium Dual-Core E2180 2.0GHz
 +
|Working
 +
|2.0 GHz Intel Core 2 Duo
 
|Yes
 
|Yes
 
|-
 
|-
Line 2,529: Line 4,223:
 
|Working
 
|Working
 
|2.2 GHz Intel Core 2 Duo
 
|2.2 GHz Intel Core 2 Duo
 +
|Yes
 +
|-
 +
|Pentium Dual-Core E5200 2.5GHz
 +
|Working
 +
|2.5 GHz Unknown
 
|Yes
 
|Yes
 
|-
 
|-
Line 2,609: Line 4,308:
 
|Working
 
|Working
 
|2.4 GHz Intel Core 2 Duo
 
|2.4 GHz Intel Core 2 Duo
 +
|Yes (Vanilla Kernel)
 +
|-
 +
|Intel Core 2 Duo E6600
 +
|Working (Overclocked)
 +
|3.0 GHz Intel Core 2 Duo
 
|Yes (Vanilla Kernel)
 
|Yes (Vanilla Kernel)
 
|-
 
|-
Line 2,621: Line 4,325:
 
|Yes (Vanilla Kernel)
 
|Yes (Vanilla Kernel)
 
|-
 
|-
 +
|Intel Core 2 Duo E7200
 +
|Working
 +
|2.53 Ghz Intel Core 2 Duo E7200
 +
|Yes, works with Kalyway, iDeneb, Jas and Leo4all with Vanilla Kernel
 +
|-
 +
|Intel Core 2 Duo E7500
 +
|Working
 +
|2.93 Ghz Intel Core 2 Duo E7500
 +
|Yes Shown as "3 GHz Unknown" 1 cores, works with Kalyway tested by [http://www.facebook.com/profile.php?id=1343186070&ref=profile Muhammad Anil Babur Kiani]
 +
|-
 +
 
|Intel Core 2 Duo E8200
 
|Intel Core 2 Duo E8200
 
|Working
 
|Working
 
|Intel Unknown @ 2.67 GHz
 
|Intel Unknown @ 2.67 GHz
|Yes
 
|-
 
|Intel Core 2 Duo E8400
 
|Working
 
|3.0GHz Unknown
 
 
|Yes
 
|Yes
 
|-
 
|-
Line 2,636: Line 4,346:
 
|Yes (Vanilla Kernel)
 
|Yes (Vanilla Kernel)
 
|-
 
|-
|Intel Core 2 Quad Q6600
+
|Intel Core 2 Duo E8500
|Clocked at 2.7GHz
+
|Working
|2.7GHz Unknown
+
|3.16GHz Intel Core 2 Duo E8500
|Yes
+
|Yes (Vanilla Kernel)
 
|-
 
|-
 +
 
|Intel Core 2 Quad Q6600
 
|Intel Core 2 Quad Q6600
|Clocked at 4 GHz
 
|2.4GHz Intel CoreTM 2 Quad Processors
 
|Yes
 
|-
 
|Intel Core 2 Quad Q6600 'G0 stepping/revision'
 
 
|Working
 
|Working
|2.4/3.8 ghz Unknown 'change applesmbios.kext and it reports: 2,4ghz Intel Core2 Quad'
+
|2.4 GHz Unknown. [[Apple hardware|Apple never adapted]] Q6600 on their machines and that is why it shows unknown. But the processor is working fine (at least on mine). To fix this, change "Unknown" to "Intel Core 2 Quad" in /System/Library/CoreServices/Resources/English.lproj/AppleSystemInfo.string and verify if About This Mac displays what you just edit.
 
|Yes
 
|Yes
 
|-
 
|-
 
|Intel Core 2 Quad Q6700
 
|Intel Core 2 Quad Q6700
 
|Working
 
|Working
|2.66 ghz Intel Core 2 Quad
+
|2.66 ghz Unknown
 
|Yes
 
|Yes
 +
|-
 +
|Intel Core 2 Quad Q8200
 +
|Working
 +
|2.33 GHz Unknown. Use the previously mentioned AppleSystemInfo.string edit (see Q6600) or use Pcwiz's osx86 tools to edit the name.
 +
|Yes (Vanilla Kernel)
 
|-
 
|-
 
|Intel Core 2 Quad Q9300
 
|Intel Core 2 Quad Q9300
Line 2,664: Line 4,375:
 
|Working
 
|Working
 
|Genuine Intel CPU 2.66GHz 3.2Ghz
 
|Genuine Intel CPU 2.66GHz 3.2Ghz
 +
|Yes (Vanilla Kernel)
 +
|-
 +
|Intel Core 2 Quad Q9450 @ 3 GHz tray
 +
|Working
 +
|3 GHz unkown
 
|Yes (Vanilla Kernel)
 
|Yes (Vanilla Kernel)
 
|-
 
|-
Line 2,681: Line 4,397:
 
|Yes
 
|Yes
 
|-
 
|-
|} . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+
|Intel Xeon 5410
 +
|Working
 +
|4GHz Unknown [is 4x2.33]
 +
|Yes
 +
|-
 +
|} . .
  
 
==Graphics Cards==  
 
==Graphics Cards==  
Line 2,695: Line 4,416:
 
!Hardware Name
 
!Hardware Name
 
!Board-Manufacturer
 
!Board-Manufacturer
!Notes              
+
!Notes  
 
!QE / CI
 
!QE / CI
 
!Resolution
 
!Resolution
Line 2,721: Line 4,442:
 
|No
 
|No
 
|-
 
|-
|} . . . .
+
|Radeon HD 2600 Pro 512MB
 +
|Sapphire
 +
|Driver fom Kalyway 10-5-2 DVD
 +
|Yes
 +
|All
 +
|Yes
 +
|-
 +
|Radeon 9600 XT 128MB
 +
|Sapphire
 +
|Callisto driver 008
 +
|Yes
 +
|All
 +
|No needs patching
 +
|} .
  
 
====nVidia====
 
====nVidia====
Line 2,729: Line 4,463:
 
!Hardware Name
 
!Hardware Name
 
!Board-Manufacturer
 
!Board-Manufacturer
!Notes              
+
!Notes  
 
!QE / CI
 
!QE / CI
 
!Resolution
 
!Resolution
Line 2,754: Line 4,488:
 
|1280x1024
 
|1280x1024
 
|No
 
|No
 +
|-
 +
|GeForce 6800 XT 256MB AGP
 +
|Biostar
 +
|Works with NVInject and Titan
 +
|Both
 +
|All
 +
|No
 +
|-
 +
|GeForce 6800 XT 256MB AGP
 +
|XFX
 +
|Works with NVInject (Leopard-Only Version from NvInject[http://nvinject.free.fr/]). No AGPgart Installed, NVCAP changed to Dual-dvi both channels setting. Dual monitor and TV-out not tested.
 +
|Both
 +
|All
 +
|No,
 
|-
 
|-
 
|GeForce FX5200
 
|GeForce FX5200
Line 2,788: Line 4,536:
 
|Both
 
|Both
 
|All + dual
 
|All + dual
 +
|No, needs NVinject
 +
|-
 +
|GeForce 6600 AGP 128MB
 +
|Inno3D
 +
|Works with NVinject 0.2.1 or NVKush
 +
|QE/CI works
 
|Yes
 
|Yes
 +
|No QE/CI and Resolution Change without NVinject or NVKush
 
|-
 
|-
|} . . . . . . . . . . . . . . . . . .
+
|} .
  
 
===PCI Express===
 
===PCI Express===
Line 2,800: Line 4,555:
 
!Hardware Name
 
!Hardware Name
 
!Board-Manufacturer
 
!Board-Manufacturer
!Notes              
+
!Notes  
 
!QE / CI
 
!QE / CI
 
!Resolution
 
!Resolution
 
!Fully Working w/o Patch
 
!Fully Working w/o Patch
 +
|-
 +
|Radeon X1900XTX 512MB
 +
|ATI
 +
|iDenbe 10.5.5, DPCIManager: 1002:7249 ATI Technologies Inc R580 [Radeon X1900 XT] (Primary). Had to add Natit.kext to get all resolutions up to 1920x1200
 +
|YES BOTH
 +
|1024x786 
 +
|NO
 
|-
 
|-
 
|Radeon X1300 Pro 256MB
 
|Radeon X1300 Pro 256MB
Line 2,811: Line 4,573:
 
|All Resolutions
 
|All Resolutions
 
|No, not fully. You can just use DVI - but there's no prob to adapt it.
 
|No, not fully. You can just use DVI - but there's no prob to adapt it.
 +
|-
 +
|ASUS EAX1600 Pro 256MB
 +
|ASUS
 +
|Works with manual modify the video kext with your id]
 +
|Both
 +
|All Resolutions
 +
|fully working.
 
|-
 
|-
 
|Radeon X1600P 256MB
 
|Radeon X1600P 256MB
Line 2,819: Line 4,588:
 
|Yes with patch
 
|Yes with patch
 
|-
 
|-
|Radeon x1650 Pro 256MB PCIE
+
|Radeon X800GT 256MB
 +
|Sapphire
 +
|Works with Zephyroth AMD 10.5.2 Rev.1
 +
|Unknown
 +
|1280x1024
 +
|Yes
 +
|-
 +
|Radeon x1650 Pro 256MB
 
|Sapphire
 
|Sapphire
 
|No DVI
 
|No DVI
Line 2,827: Line 4,603:
 
'''Added''': In my case, somehow installation of Modbin's package did not does the job. However, I extracted the kexts from the installation package matching with my device ID (using Pacifist) and drag those kexts to /System/Library/Extension, authenticate and replace, then I got QE/CI/Rotation and resolutions (though missing 1680x1050).
 
'''Added''': In my case, somehow installation of Modbin's package did not does the job. However, I extracted the kexts from the installation package matching with my device ID (using Pacifist) and drag those kexts to /System/Library/Extension, authenticate and replace, then I got QE/CI/Rotation and resolutions (though missing 1680x1050).
 
|-
 
|-
|Radeon EAX1650 256DDR3 Gamer Edition
+
|Radeon EAX1650 256 DDR3 Gamer Edition
 
|ASUS
 
|ASUS
 
|Fully working
 
|Fully working
Line 2,835: Line 4,611:
 
Recognized as X1600.
 
Recognized as X1600.
 
|-
 
|-
|Radeon X1800XT
+
|Radeon X1800XT 512MB
 
|ATI
 
|ATI
 
|Diabolik's X1800 Natit, enter Dev ID in ATIRadeonX1000.kext
 
|Diabolik's X1800 Natit, enter Dev ID in ATIRadeonX1000.kext
|QE Works, CI unknown
+
|QE Works, CI Works
 +
|All Resolutions
 +
|Yes with patch
 +
|-
 +
|Radeon X1600XT 256Mb DDR3 (Device ID 0x71c0)
 +
|GeCube (ATI (0x1002))
 +
|[http://forum.insanelymac.com/index.php?showtopic=69345&pid=508765&mode=threaded&start= ATI x1x00 Video Cards on Leopard]
 +
|QE Works, CI Works
 
|All Resolutions
 
|All Resolutions
 
|Yes with patch
 
|Yes with patch
Line 2,904: Line 4,687:
 
|All Resolutions
 
|All Resolutions
 
|Yes with Natit
 
|Yes with Natit
 +
|-
 +
|HD 2600XT 256MB
 +
|PowerColor
 +
|Working out of the box, both heads
 +
|
 +
|
 +
|Yes
 +
|-
 
|-
 
|-
 
|ATI Radeon HD 2600XT
 
|ATI Radeon HD 2600XT
Line 2,925: Line 4,716:
 
|All Resolutions, Dual Head, Pivot
 
|All Resolutions, Dual Head, Pivot
 
|No, needs Netkas' NATIT (26.02.2008)
 
|No, needs Netkas' NATIT (26.02.2008)
 +
|-
 +
|ATI Radeon HD 2600XT 512MB
 +
|Diamond
 +
|Yes
 +
|Yes
 +
|All Resolutions
 +
|Works out of the box.
 
|-
 
|-
 
|ATI Radeon HD 2600pro
 
|ATI Radeon HD 2600pro
Line 2,967: Line 4,765:
 
|All Resolutions
 
|All Resolutions
 
|Yes - Not known if patch used
 
|Yes - Not known if patch used
 +
|-
 +
|ATI Radeon HD 3650 1024MB DDR2
 +
|ATI
 +
|Used the driver from [http://forum.insanelymac.com/index.php?s=&showtopic=107526&view=findpost&p=767227 this post]
 +
|Both
 +
|All Resolutions
 +
|No patch, but driver from [http://forum.insanelymac.com/index.php?s=&showtopic=107526&view=findpost&p=767227 this post]
 +
|-
 +
|Radeon HD 3650 512MB DDR2 (EAH3650 SILENT MAGIC)
 +
|Asus
 +
|Driver from [http://forum.insanelymac.com/index.php?s=&showtopic=107526&view=findpost&p=767227 this post (33)]. Tested with Kalyway52-4, Atkos54, Leo4Allv4.1 (DVI/VGA). A cheap (50€) and energy efficient (10W/65W), silent card - Crysis in low res still playable.
 +
|Both
 +
|All Resolutions
 +
|Works fine
 
|-
 
|-
 
|Radeon HD 3650 512MB DDR2
 
|Radeon HD 3650 512MB DDR2
Line 2,974: Line 4,786:
 
|All Resolutions
 
|All Resolutions
 
|Works, with the mentioned installer.
 
|Works, with the mentioned installer.
 +
|-
 +
|Radeon HD 3650pro 256MB DDR2
 +
|HIS
 +
|Used the installer from [http://forum.insanelymac.com/index.php?showtopic=107526&st=20# this post], Dont use Kalyway Combo Update 10.5.3, or you'll get white menu bugs.  Install the package, then install Jas Combo Update 10.5.3 No need for aditional patching, kexts editing etc. Connected to a VGA monitor, using a dvi2vga adapter.
 +
|Both
 +
|All Resolutions
 +
|Works, use ATI Radeon HD.pkg for 3650 version.
 
|-
 
|-
 
|ATI Radeon HD 3850
 
|ATI Radeon HD 3850
Line 2,988: Line 4,807:
 
|Yes Up to 1080p 1920x1080
 
|Yes Up to 1080p 1920x1080
 
|No
 
|No
|-  
+
|-
 +
|ATI Radeon HD 3850 512MB
 +
|Powercolor
 +
|Use EFISTUDIO_EXTENDED from [http://forum.insanelymac.com/index.php?showtopic=141490# here]
 +
|Yes
 +
|All Resolutions
 +
|minimum requirement is 10.5.5 or higher
 +
|- 
 
|ATI Radeon HD 3870
 
|ATI Radeon HD 3870
 
|Sapphire
 
|Sapphire
Line 3,003: Line 4,829:
 
|Fully working with patch
 
|Fully working with patch
 
|-
 
|-
|} . . . . . . . . . . . . . . . . . . . . .
+
|ATI Radeon HD 3870 ultimate (passiv)
 +
|Sapphire
 +
|All ok with the driver from [http://forum.insanelymac.com/index.php?showtopic=107526&st=0 here]
 +
|Yes
 +
|All Resolutions
 +
|All fine
 +
|-
 +
|ATI Radeon HD 4850
 +
|Visiontek
 +
|TBA
 +
|TBA
 +
|TBA
 +
|TBA
 +
|-
 +
|ATI Radeon HD 4850
 +
512MB
 +
|Sapphire
 +
|Was stuck at 1024x768 Res until I found the fix -->
 +
|Not Sure
 +
|Max 1280x1024 (on my 17")
 +
|Resolution Fix @ this thread [http://insanelymac.com/forum/index.php?showtopic=203638&pid=1367666&mode=threaded&start=0#entry1367666 here]
 +
|
 +
|}. . . . . . .
  
 +
====nVIDIA====
 
{| class="wikitable" width="100%"
 
{| class="wikitable" width="100%"
 
+
|-
 +
!Hardware Name
 +
!Board-Manufacturer
 +
!Notes
 +
!QE / CI
 +
!Resolution
 +
!Fully Working w/o Patch
 +
|-
 +
|GeForce Go 6150
 +
|nVidia shared memory
 +
|Works with iDeneb v1, Leo4All v4.1 and [http://www.mediafire.com/?0dnwxihyqn5 Graphics fix - instructions included]
 +
128MB vram - updated in BIOS
 +
|QE - not supported / CI - software
 +
|Multiple resolutions supported
 +
|No
 +
|-
 +
|GeForce 8600 512MB DVI Fanless Heatsync
 +
|EliteGroup
 +
|Works with Kalyway 10.5.2
 +
Selected nVidia inJect 512 Graphics card on Kalyway install
 +
|unknown
 +
|Multiple resolutions supported including 1920x1200
 +
|No special patch needed after selecting Nvinject 512 on install.
 +
|-
 
|GeForce 6200
 
|GeForce 6200
 
|MSI
 
|MSI
Line 3,013: Line 4,885:
 
|Default: 1024x768 Unable to change resolution from System Preferences, changed resolution from boot
 
|Default: 1024x768 Unable to change resolution from System Preferences, changed resolution from boot
 
|Partially working with patch (Since QE is not supported)
 
|Partially working with patch (Since QE is not supported)
 +
|-
 +
|GeForce 6200TC 64MB (256MB Turbo Cache)
 +
|Unknown
 +
|Used iAtkos 10.5.2. Works with NVinject 0.2.0. Good performance!
 +
|Yes, both
 +
|Default: 1024x768, resolution automaticly changed to 1680x1050 after installing NVinject.
 +
|No, use NVinject
 
|-
 
|-
 
|GeForce 6200TC 512MB
 
|GeForce 6200TC 512MB
Line 3,020: Line 4,899:
 
|Unknown
 
|Unknown
 
|Unknown
 
|Unknown
 +
|-
 +
|GeForce 6700  128 MB
 +
|MSI
 +
|tested with Kalyway 10.5.2 select NVinject-128
 +
|unknown
 +
|all resolutions
 +
|Yes, use NVinject-128MB
 
|-
 
|-
 
|GeForce 6800GS 256MB  
 
|GeForce 6800GS 256MB  
Line 3,034: Line 4,920:
 
|1920x1200 working
 
|1920x1200 working
 
|No
 
|No
|- Dave
+
|-
 +
|GeForce 6800GT 256MB
 +
|Leadtek
 +
|NVinject 0.2.1, manually add device IDs to kexts (Geforce, NVDARE~, NVDAR4~)
 +
|QE/CI both work
 +
|1680 x 1050 working fine
 +
|Fully working with patch. Dual monitor (extended desktop) works using VGA + DVI-to-VGA adapter
 +
|-
 
|GeForce 7100GS 256MB  
 
|GeForce 7100GS 256MB  
 
|XFX
 
|XFX
Line 3,048: Line 4,941:
 
|All resolutions work
 
|All resolutions work
 
|Fully working with patch
 
|Fully working with patch
 +
|-
 +
|GeForce 7200GS 256MB
 +
|ASUS
 +
|NVInject on Kalyway 10.5.2
 +
|Both
 +
|Yes
 +
|Working with patch
 
|-
 
|-
 
|GeForce 7200GS 256MB  
 
|GeForce 7200GS 256MB  
Line 3,054: Line 4,954:
 
|QE/CI both work
 
|QE/CI both work
 
|All resolutions work
 
|All resolutions work
|Fully working with patch
+
|Single display working with patch (10.5.3 works with vanilla NVinstaller v0.52); TV-out does not work at all
 
|-
 
|-
 
|GeForce 7200GS 256MB Passive Cooling
 
|GeForce 7200GS 256MB Passive Cooling
Line 3,110: Line 5,010:
 
|QE/CI both work
 
|QE/CI both work
 
|All resolutions work
 
|All resolutions work
 +
|Fully working with patch
 +
|-
 +
|GeForce 7300GS 256MB
 +
|MSI
 +
|NVinject/NVinstaller 5.2
 +
|QE/CI both work
 +
|All resolutions work in both DVI and HDMI ports
 
|Fully working with patch
 
|Fully working with patch
 
|-
 
|-
Line 3,128: Line 5,035:
 
|GeForce 7300GT 256MB
 
|GeForce 7300GT 256MB
 
|BIG
 
|BIG
 +
|NVInject
 +
|QE/CI both work
 +
|All resolutions work
 +
|Yes with NVInject
 +
|-
 +
|GeForce 7300GT 256MB
 +
|GIGABYTE
 
|NVInject
 
|NVInject
 
|QE/CI both work
 
|QE/CI both work
Line 3,175: Line 5,089:
 
|No, I had to flash my card so that Darwin recognizes it as a 512 Mb video card.  
 
|No, I had to flash my card so that Darwin recognizes it as a 512 Mb video card.  
 
|-
 
|-
|GeForce 7600GS 256MB
+
|GeForce 7500LT 256MB
|Palit
+
|ASUS
|NVInject
+
|NVKush, works with NVKush Istaller. VGA and DVI both work.
|Both
+
|QE/CI work
|All resolutions work
+
|1280 x 1024 works great
|Fully working with NVInject
+
|Fully working with NVKush.
 
|-
 
|-
 
|GeForce 7600GS 256MB
 
|GeForce 7600GS 256MB
Line 3,191: Line 5,105:
 
|GeForce 7600GS 256MB
 
|GeForce 7600GS 256MB
 
|PowerColor
 
|PowerColor
 +
|NVinject
 +
|QE/CI both work
 +
|All resolutions work
 +
|Fully working
 +
|-
 +
|GeForce 7600GT 256MB
 +
|PNY
 
|NVinject
 
|NVinject
 
|QE/CI both work
 
|QE/CI both work
Line 3,198: Line 5,119:
 
|GeForce 7600GT 256MB
 
|GeForce 7600GT 256MB
 
|BIOSTAR
 
|BIOSTAR
|NVinject or EFI string
+
|
 +
*Works with NVinject or EFI string
 +
*(Model: V7603GT21) The stock fan noise is not detectable all the time.  One may need to move his hand close enough to the fan to see if it is running.
 +
|QE/CI both work
 +
|All resolutions work
 +
|Fully working
 +
|-
 +
|GeForce 7600GT 256MB
 +
|eVGA
 +
|
 +
*Works with NVinject or EFI string
 +
*(Model: 256P2N553DX) The stock fan gets really noisy during booting (post) and then becomes really quiet. It becomes noisy right before Sleep, and keeps running like so after Wake.
 
|QE/CI both work
 
|QE/CI both work
 
|All resolutions work
 
|All resolutions work
Line 3,227: Line 5,159:
 
|Eagle
 
|Eagle
 
|NVinject or Natit
 
|NVinject or Natit
 +
|QE/CI both work
 +
|All resolutions work
 +
|Yes
 +
|-
 +
|GeForce 7600GT 256MB GDDR3
 +
|Zotac
 +
|NVinject
 
|QE/CI both work
 
|QE/CI both work
 
|All resolutions work
 
|All resolutions work
Line 3,237: Line 5,176:
 
|All resolutions work
 
|All resolutions work
 
|VIVO doesn't work otherwise fully functional
 
|VIVO doesn't work otherwise fully functional
 +
|-
 +
|GeForce 7600GT Silent 256MB
 +
|MSI
 +
|NVinject (ASUS P5B-MX), EFI-string using EFIStudio (Gigabyte GA-G31M-S2L)
 +
|QE/CI both work
 +
|All resolutions work
 +
|Needs patch for resolutions and memory detection
 
|-
 
|-
 
|GeForce 7600GT 256MB
 
|GeForce 7600GT 256MB
Line 3,258: Line 5,204:
 
|Not all
 
|Not all
 
|Need patch from Kalyway
 
|Need patch from Kalyway
 +
|-
 +
|GeForce 7800GT 256MB
 +
|eVGA
 +
|NVinject 0.2.0 (Kalyway_10.5.2; NVinject-256). Both DVI ports recognized; have not tested dual monitor.
 +
|CI: Hardware Accelerated. QE: Supported
 +
|Dell 1702FP recognized, up to 1280 x 1024 x 75Hz x millions;
 +
|with NVinject
 
|-
 
|-
 
|GeForce 7800GT OC 256MB
 
|GeForce 7800GT OC 256MB
Line 3,322: Line 5,275:
 
|Can use Nvinject or without if you have efi installed by following guide to create gfx string [http://osx86.wikidot.com/how-to-s#toc6 here]
 
|Can use Nvinject or without if you have efi installed by following guide to create gfx string [http://osx86.wikidot.com/how-to-s#toc6 here]
 
|-
 
|-
!GeForce 8400GS 256MB
+
|GeForce 8400GS 256MB
!Gigabyte
+
|Gigabyte
!Works with  NVinject and NVidia kexts from Zephyroth 10.5.2 DVD, no DVI only analog works.          
+
|Works with  NVinject 0.2.1, NVCAP string with 04000000 00000300 04000000 00000007 00000000for DVI.
!QE / CI ,  yes all
+
|QE / CI ,  yes all
!Resolution , yes all  
+
|Resolution , yes all  
!Fully Working w/o Patch yes
+
|Fully Working with Patch
 
|-
 
|-
 
|GeForce 8400GS 256MB
 
|GeForce 8400GS 256MB
Line 3,337: Line 5,290:
 
|-
 
|-
 
|GeForce 8400GS 256MB
 
|GeForce 8400GS 256MB
|XFX
+
|Sweex
|NVinject 0.2.0 during Kalyway 10.5.2 install (choose Nvidia 256MB)
+
|NVinject 0.2.1
 
|QE/CI both work
 
|QE/CI both work
 
|All resolutions work
 
|All resolutions work
|No QE/CI without patch (NVinject 0.2.0 during Kalyway 10.5.2 install)
+
|Fully working with patch
 +
|-
 +
|GeForce 8400GS 256MB
 +
|XFX
 +
|NVinject 0.2.0 during Kalyway 10.5.2 install (choose Nvidia 256MB)
 
DVI output needs NVCAP edit:
 
DVI output needs NVCAP edit:
 
* Right Click /System/Library/Extensions/NVInject.kext choose "Show Package Contents"
 
* Right Click /System/Library/Extensions/NVInject.kext choose "Show Package Contents"
Line 3,347: Line 5,304:
 
* Open Info.plist copy with Plist Editor
 
* Open Info.plist copy with Plist Editor
 
* Replace NVCAP string with 04000000 00000300 04000000 00000007 00000000  
 
* Replace NVCAP string with 04000000 00000300 04000000 00000007 00000000  
* Save copy of info.plist and copy back to NVInject.kext contents
+
* Save copy of info.plist and copy back to NVInject.kext contents|QE/CI both work
 +
|All resolutions work
 +
|No QE/CI without patch (NVinject 0.2.0 during Kalyway 10.5.2 install)
 
|-
 
|-
 
|GeForce 8400GS 256MB
 
|GeForce 8400GS 256MB
Line 3,359: Line 5,318:
 
|XFX
 
|XFX
 
|NVinject 0.2.0 during Kalyway 10.5.2 install
 
|NVinject 0.2.0 during Kalyway 10.5.2 install
 +
DVI output needs NVCAP edit. 04000000 00000300 04000000 00000007 00000000 worked.
 
|QE/CI both work
 
|QE/CI both work
 
|All resolutions work
 
|All resolutions work
|No. DVI output needs NVCAP edit. 04000000 00000300 04000000 00000007 00000000 worked.
+
|No.
 
|-
 
|-
|-|GeForce 8400GT 512MB
+
|-
 +
|GeForce 8400GS 256MB
 +
|Club3D
 +
|NVinject 0.2.0 after Kalyway 10.5.2 install (don't use 0.2.1)
 +
|QE/CI both work
 +
|All resolutions work
 +
|DVI not tested
 +
|-
 +
|-
 +
|GeForce 8400GT 512MB
 
|eVGA
 
|eVGA
 
|Works with NvInject
 
|Works with NvInject
Line 3,397: Line 5,366:
 
|All resolutions + DVI-I
 
|All resolutions + DVI-I
 
|Yes, with patch
 
|Yes, with patch
 +
|-
 +
|GeForce 8500GT (SILENT)
 +
|Gigabyte GV-NX85T512HP
 +
|Used method as described [http://http://forum.insanelymac.com/index.php?s=&showtopic=109814&view=findpost&p=778873 here]
 +
|QE/CI work flawlessly!
 +
|All Resolutions + DVI
 +
|Yes, using [http://forum.insanelymac.com/index.php?s=&showtopic=109814&view=findpost&p=778873 this] method.
 
|-
 
|-
 
|Nvidia GeForce 8600M GS 512MB
 
|Nvidia GeForce 8600M GS 512MB
 
|NVidia
 
|NVidia
 
|Display requires driver installation and modification of info.plist to work at full resolution and with VGA-out. Mirror function still doesn't work properly, but forces main display to VGA-out.
 
|Display requires driver installation and modification of info.plist to work at full resolution and with VGA-out. Mirror function still doesn't work properly, but forces main display to VGA-out.
* Install Universal NVidia Driver (http://zack.phatoproductions.com/downloads/mac/NVidia-Universal-Installer.mpkg.rar)
+
* Install Universal NVidia Driver [http://zack.phatoproductions.com/downloads/mac/NVidia-Universal-Installer.mpkg.rar]
 
* Right Click /System/Library/Extensions/NVInject.kext choose "Show Package Contents"
 
* Right Click /System/Library/Extensions/NVInject.kext choose "Show Package Contents"
 
* Copy Info.plist to ~/Desktop
 
* Copy Info.plist to ~/Desktop
Line 3,408: Line 5,384:
 
* Save copy of info.plist and copy back to NVInject.kext contents
 
* Save copy of info.plist and copy back to NVInject.kext contents
 
* Change permissions of NVInject:
 
* Change permissions of NVInject:
    "sudo chown -R root:wheel /System/Library/Extensions/NVinject.kext"
+
"sudo chown -R root:wheel /System/Library/Extensions/NVinject.kext"
    "sudo chmod -R 755 /System/Library/Extensions/NVinject.kext"
+
"sudo chmod -R 755 /System/Library/Extensions/NVinject.kext"
 
* Run Disk Utility and repair permissions on disk.
 
* Run Disk Utility and repair permissions on disk.
 
* Delete Extension Caches and Kernel Caches before rebooting
 
* Delete Extension Caches and Kernel Caches before rebooting
    "sudo rm -R /System/Library/Extensions.mkext /System/Library/Extensions/Caches/"
+
"sudo rm -R /System/Library/Extensions.mkext /System/Library/Extensions/Caches/"
 
* Reboot with -f just in case.
 
* Reboot with -f just in case.
 +
|Yes
 
|Yes with Driver
 
|Yes with Driver
 
|No: 1024x768 w/out driver<br /> All Resolutions and VGA-out with Driver
 
|No: 1024x768 w/out driver<br /> All Resolutions and VGA-out with Driver
|Partial at 1024x768
+
Partial at 1024x768
 
|-
 
|-
 
|GeForce 8600GT 256MB FATAL1TY
 
|GeForce 8600GT 256MB FATAL1TY
 
|XFX
 
|XFX
|Used johnniecarcinogen's patch from [http://forum.insanelymac.com/index.php?showtopic=83931 here]
+
|NvInject 0.2.1 (256MB)
 
|QE/CI both work
 
|QE/CI both work
 
|All resolutions work
 
|All resolutions work
 
|Yes With Patch
 
|Yes With Patch
 +
|-
 +
|GeForce 8600GT 256MB Zalman
 +
|XFX
 +
|NVinstaller v.41. It works perfectly on PCIe 16x mobo (but doesn't work on PCIe 4x mobo like asrock 4coredual-sata2 for instance)
 +
|QE/CI both work
 +
|All resolutions work + dual screen
 +
|Yes with NVinstaller v.41 from leo 10.5.2 to 10.5.5, NVinstaller v.51 (vanilla choice) with leo 10.5.6.
 
|-
 
|-
 
|GeForce 8600GT 256MB
 
|GeForce 8600GT 256MB
Line 3,431: Line 5,415:
 
|All resolutions work
 
|All resolutions work
 
|Yes With Patch (Punk92) + guide (bf2loser)
 
|Yes With Patch (Punk92) + guide (bf2loser)
 +
|-
 +
|GeForce 8600GT 256MB
 +
|eVGA 256-P2-N751-TR
 +
|NVKush works perfectly OOB. NVinject 0.2.0 works the same way.
 +
|QE/CI/GL all work.  Dual-head works.
 +
|All resolutions work
 +
|Yes, with NVKush or NVInject.
 
|-
 
|-
 
|GeForce 8600GT 256MB
 
|GeForce 8600GT 256MB
Line 3,438: Line 5,429:
 
|All resolutions work
 
|All resolutions work
 
|Unknown
 
|Unknown
 +
|-
 +
|GeForce 8600GT 512MB Palit
 +
|Palit
 +
|NVinject 0.2.1. It works perfectly with two LCD or two VGA monitors, both DVI and VGA ports work perfectly, including when using adapters.
 +
|QE/CI both work
 +
|All resolutions work + dual screen
 +
|Yes with NVinject 0.2.1
 
|-
 
|-
 
|GeForce 8800GS 384MB
 
|GeForce 8800GS 384MB
Line 3,452: Line 5,450:
 
|All resolutions work
 
|All resolutions work
 
|Yes, with patch but only 768MB and not 1024MB
 
|Yes, with patch but only 768MB and not 1024MB
|-
 
|Nvidia GeForce 8800GT 512MB (G92)
 
|XpertVision
 
|NVInstaller v.33 (NVinject v0.2.1)
 
|QE/CI both work
 
|All resolutions work
 
|Yes
 
|-
 
|GeForce 8800GT 256MB
 
|XFX
 
|NVinstaller0.33
 
|QE/CI both work
 
|All resolutions work
 
|Yes, with patch
 
|-
 
|GeForce 8800GT 256MB
 
|ASUS
 
|NvInstaller 3.1 Used
 
|QE/CI both work
 
|All resolutions work
 
|Yes, with patch
 
 
|-
 
|-
 
|GeForce 8600GT 512MB
 
|GeForce 8600GT 512MB
Line 3,497: Line 5,474:
 
|GeForce 8600GTS 256MB / 512MB
 
|GeForce 8600GTS 256MB / 512MB
 
|NVIDIA
 
|NVIDIA
|Patch used, what patch unknown.
+
|Install in order, and '''clear kextcache''' / repair permissions after each step:
 +
Leopard Graphics Update 1.0 -> NVInstaller v.41 -> Erase and change Device IDs (GeForce.kext, NVDANV##Hal.kext, NVDAResman.ext, NVinject.kext) to "040010de".
 
|QE/CI both work
 
|QE/CI both work
 
|All resolutions work
 
|All resolutions work
 
|Yes
 
|Yes
 +
|-
 +
| 8800GT 512MB
 +
| BFG
 +
| NVInject 0.2.1 512MB
 +
| Supported
 +
| All resolutions
 +
| Both DVI output works
 
|-
 
|-
 
|GeForce NX8800GT 512MB
 
|GeForce NX8800GT 512MB
 
|MSI
 
|MSI
 
|NVInstaller V.34 [http://www.mediafire.com/?mi2obzt2ont here]
 
|NVInstaller V.34 [http://www.mediafire.com/?mi2obzt2ont here]
 +
|Both
 +
|All
 +
|Just great!
 +
|-
 +
|GeForce 8800GT 256MB
 +
|XFX
 +
|NVinstaller0.33
 +
|QE/CI both work
 +
|All resolutions work
 +
|Yes, with patch
 +
|-
 +
|GeForce 8800GT 256MB
 +
|ASUS
 +
|NvInstaller 3.1 Used
 +
|QE/CI both work
 +
|All resolutions work
 +
|Yes, with patch
 +
|-
 +
|GeForce 8800GT 512MB (610MB overclocked)
 +
|eVGA
 +
|Works with nvinject 512 form Kalyway 10.5.2 disk.
 +
|both
 +
|all resolution / dual monitor support
 +
|Works, but only 1 res without patch (needs nvinject for full support)
 +
|-
 +
|GeForce 8800GT 512MB
 +
|Asus
 +
|Apple graphics update 10.5.2+NV 41.
 
|Both
 
|Both
 
|All
 
|All
Line 3,556: Line 5,569:
 
|All resolutions work
 
|All resolutions work
 
|Needs patch for resolutions and memory detection
 
|Needs patch for resolutions and memory detection
 +
|-
 +
|GeForce 8800GTS 320MB
 +
|EVGA
 +
|NVinject [http://forum.insanelymac.com/index.php?showtopic=83931 here]
 +
|QE/CI both work
 +
|All resolutions work
 +
|Needs patch for resolutions and memory detection
 +
|-
 +
|GeForce 8800GTS 320MB XXX Edition
 +
|XFX
 +
|NVinject-320
 +
|QE/CI both work
 +
|All resolutions work
 +
|Yes, I used Kalyway 10.5.2 DVD with NVinject-320
 
|-
 
|-
 
|GeForce 8800GTS 512MB
 
|GeForce 8800GTS 512MB
Line 3,577: Line 5,604:
 
|All resolutions work
 
|All resolutions work
 
|Had to add 0x0600 (Device ID) to GeForce NVDANV50Hal, NVDAResman, NVinject kexts.
 
|Had to add 0x0600 (Device ID) to GeForce NVDANV50Hal, NVDAResman, NVinject kexts.
 +
|-
 +
|GeForce 8800GTS 512MB (G92)
 +
|eVGA
 +
|Edited the kext EFI string detailed in this forum post [http://forum.insanelymac.com/index.php?showtopic=89001 here]. (Takes the kext from the 8800GT gfx card in a Mac Pro.)
 +
|QE/CI both work
 +
|All resolutions work
 +
|Do not use NVinject or NVKush. Follow the instructions [http://forum.insanelymac.com/index.php?showtopic=89001 here]. Used on a Boot-132 system.
 
|-
 
|-
 
|GeForce 8800GTS 512MB (G92)
 
|GeForce 8800GTS 512MB (G92)
Line 3,583: Line 5,617:
 
|QE/CI both work
 
|QE/CI both work
 
|All resolutions work (using 1920x1200)
 
|All resolutions work (using 1920x1200)
|Yes, just used NVInstaller v0.33, download here: http://scottdangel.com/blog/?page_id=20
+
|Yes, just used NVInstaller v0.33, download here: [http://scottdangel.com/blog/?page_id=20]
 
|-
 
|-
 
|GeForce 8800GTX 756MB
 
|GeForce 8800GTX 756MB
Line 3,598: Line 5,632:
 
|All
 
|All
 
|Yes w/ NVinject
 
|Yes w/ NVinject
 +
|-
 +
|Nvidia GeForce 8800GT 512MB (G92)
 +
|XpertVision
 +
|NVInstaller v.33 (NVinject v0.2.1)
 +
|QE/CI both work
 +
|All resolutions work
 +
|Yes
 +
|-
 +
|GeForce 9600GT 512MB (Silent) (G94)
 +
|ECS (Elitegroup)
 +
|Aqua Mac v2 Package and NvDarwin 1.2.3 Must upgrade to 10.5.5!
 +
|Both
 +
|All
 +
|No follow instructions here [http://forum.insanelymac.com/index.php?s=&showtopic=90112&view=findpost&p=948941]
 +
|-
 +
|Asus nVidia GeForce EN9800GT HybridPower 512MB
 +
|Asus
 +
|GFX Strings
 +
|QE/CI Enabled
 +
|All Resolutions
 +
|Use the method stated here with the 8800GT Download Template. [http://aquamac.proboards106.com/index.cgi?board=hack1&action=display&thread=509&page=1]
 +
|-
 +
|Zotac nVidia GeForce 9800GT  512MB
 +
|ZOTAC
 +
|NVInstaller
 +
|QE/CI/QGL Enabled
 +
|All Resolutions
 +
|Use the method NVINSTALLER]
 
|-
 
|-
 
|GeForce 9800GTX 512MB (G92)
 
|GeForce 9800GTX 512MB (G92)
Line 3,612: Line 5,674:
 
|All showing in System Preferences>Display; but only 1680x1050 tested (my LCD native)
 
|All showing in System Preferences>Display; but only 1680x1050 tested (my LCD native)
 
|Best results with GFX Strings method described by aquamac [http://aquamac.proboards106.com/index.cgi?board=hack1&action=display&thread=509 here]
 
|Best results with GFX Strings method described by aquamac [http://aquamac.proboards106.com/index.cgi?board=hack1&action=display&thread=509 here]
|}  
+
|-
 +
|GeForce 9800GX2 512MB (G92)
 +
|MSI
 +
|[Special PCI Paths, two!] GFX Strings & EFI v.8
 +
|Both
 +
|Everything works, Display prefs show all options; 1920×1200 tested (my LCD native), QE&CI Enabeld
 +
|Use GFX Strings with PC_EFI v8 and aquamac's post for ideas on the PCI paths: [http://forum.insanelymac.com/index.php?showtopic=110749&hl=9800GX2] (use google's cache if it stops working)
 +
|-
 +
|nVidia Quadro FX 1400 (128Mb)
 +
|HP
 +
|Kalyway Release 10.5.2 & NVinject 0.2.0 &
 +
|Both
 +
|All resolution work include Dual View Display
 +
|Patch needed in insanelymac forum (change deviceID in GeForoce.kext, NVIDANV40HAL.kext, NVinject.kext)
 +
|-
 +
|nVidia Quadro FX 4500 512MB (G70/G70GL)
 +
|HP
 +
|Kalyway 10.5.2 & NVinject 0.2.0
 +
|QE/CI both work
 +
|All resolutions work with dual display and mirroring
 +
|No patch needed, just shows up as "Graphics by NVIDIA" in system profiler
 +
|-
 +
|} . . . .
  
 
===Integrated===
 
===Integrated===
Line 3,620: Line 5,704:
 
!Hardware Name,(VRAM)
 
!Hardware Name,(VRAM)
 
!Board-Manufacturer
 
!Board-Manufacturer
!Notes              
+
!Notes  
 
!QE / CI
 
!QE / CI
 
!Resolution
 
!Resolution
 
!Full Work / No Patch
 
!Full Work / No Patch
 +
|-
 +
|GMA900
 +
|Intel
 +
|Working (No artifacts, so far with Sansey's method, drivers edited by Andy), but needs external monitor/dongle or wire trick (which is the easiest fix, see [http://img391.imageshack.us/my.php?image=photo006ab6.jpg this])
 +
|Both
 +
|1280x800 (Changing resolutions work)
 +
|Download [http://forum.insanelymac.com/index.php?showtopic=110176 these] drivers and install using [http://forum.insanelymac.com/index.php?showtopic=110176&st=20# this] method (more success rates and nearly no artifacts)
 
|-
 
|-
 
|GMA950
 
|GMA950
 
|Intel
 
|Intel
|Working but some minor issues (mouse tearing)                
+
|Working but some minor issues (mouse tearing)
 
|Both
 
|Both
 
|After applying kext update get only one resolution
 
|After applying kext update get only one resolution
Line 3,634: Line 5,725:
 
|GMA3100
 
|GMA3100
 
|Intel
 
|Intel
|Working but fixed at only one resolution            
+
|Working but fixed at only one resolution
 
|No QE / CI
 
|No QE / CI
 
|1024x768
 
|1024x768
Line 3,641: Line 5,732:
 
|GMAX3100
 
|GMAX3100
 
|Intel
 
|Intel
|Working perfectly            
+
|Working perfectly
 
|Yes
 
|Yes
 
|1280x800
 
|1280x800
 
|yes, with Leopard Graphics Update
 
|yes, with Leopard Graphics Update
 
|-
 
|-
|} . . . . . . . . . . . . . . . . . . . . .
+
|GMAX3500
 +
|Intel
 +
|Working but fixed at only one resolution
 +
|No QE / CI
 +
|1024x768
 +
|No Patch needed
 +
|-
 +
|}  
  
 
==Network Cards==
 
==Network Cards==
Line 3,658: Line 5,756:
 
!Notes
 
!Notes
 
!Fully Working w/o Patch
 
!Fully Working w/o Patch
 +
|-
 +
|USB adapter
 +
|802.11b/g
 +
|WNC-0305USB
 +
|LevelOne
 +
|It use RTL8187 chipset. Working stable with Kalyway 10.5.2 DVD and driver from [http://www.treiberupdate.de/treiber-download/download-163407-treiber-Realtek-RTL8187LWLANChip.html HERE] or search for 87_Mac10.4_v1309.zip file.
 +
|YES! Install only the driver.
 +
|-
 +
|PCI Card
 +
|802.11b/g
 +
|Gigaset PCI Card 54
 +
|Siemens
 +
|Working as Airport, OOB without patching, on every current Leopard OSX86 install, even on real 10.4.11 PPC G4. Identical to "Sonnet Aria Extreme" with Broadcom chip.
 +
|YES!
 +
|-
 +
|PCI Card
 +
|802.11b/g
 +
|WLI2-PCI-G54S
 +
|Buffalo
 +
|Working as Airport, OOB. Tried on Kalyway 10.5.2.
 +
|Yes
 +
|-
 +
|Mini PCI-E Card
 +
|802.11b/g/n
 +
|4965AGN
 +
|Intel
 +
|Unknown Please Confirm
 +
|Unknown
 +
|-
 +
|PCI
 +
|802.11b/g/n
 +
|AEDA1A
 +
|Broadcom
 +
|Working desktop adapter by BuildSmart
 +
|Yes
 +
|-
 +
|PCIe X1
 +
|802.11a/b/g/n
 +
|AEDA1B
 +
|Broadcom
 +
|Working (270mbps in OS X) desktop adapter by BuildSmart
 +
|Yes
 +
|-
 +
|PCIe X1
 +
|802.11a/b/g/n
 +
|AEDA1C
 +
|Atheros
 +
|Working (300mbps in OS X) desktop adapter by BuildSmart
 +
|Yes
 
|-
 
|-
 
|PCI Card
 
|PCI Card
Line 3,665: Line 5,812:
 
|Atheros Chipset, Working using [http://forum.insanelymac.com/index.php?showtopic=40317&start=0&p=472341&#entry472341 this post] (''kexts from 10.4.8'') Manufacturer ID: 168c Device ID: 0013; connect on startup with a small script
 
|Atheros Chipset, Working using [http://forum.insanelymac.com/index.php?showtopic=40317&start=0&p=472341&#entry472341 this post] (''kexts from 10.4.8'') Manufacturer ID: 168c Device ID: 0013; connect on startup with a small script
 
|No
 
|No
 +
|-
 +
|PCI
 +
|802.11b/g
 +
|WL-138g v2
 +
|ASUS
 +
|OOB with BCM4318 chipset
 +
|Yes
 
|-
 
|-
 
|Mini PCI Express Card
 
|Mini PCI Express Card
Line 3,671: Line 5,825:
 
|Atheros
 
|Atheros
 
|Working
 
|Working
|Working on Kalyway's 10.5.1 with 10.5.2 update
+
|Working with this kext: [http://forum.insanelymac.com/index.php?showtopic=61260]
|-
+
|PCI Card
+
|802.11b/g
+
|WL-138G V2
+
|Asus
+
|Works OOB
+
|Yes
+
 
|-
 
|-
 
|PCI Card
 
|PCI Card
Line 3,685: Line 5,832:
 
|Belkin
 
|Belkin
 
|Working with Broadcom 43xx Patch included on Zephyroth DVD.  Regular dropouts, cause unconfirmed.
 
|Working with Broadcom 43xx Patch included on Zephyroth DVD.  Regular dropouts, cause unconfirmed.
 +
|With patch
 +
|-
 +
|PCI Card
 +
|802.11b/g
 +
|C54RC/C54Ri (rt2500)
 +
|Conceptronic
 +
|Working with the Tiger 10.4 driver from ralink (22-11-2006/668KB). lspci -nn: 01:09.0 Network controller 0280: RaLink RT2500 802.11g Cardbus/mini-PCI 1814:0201 (rev 01). This is the older card with the rt2500 chip, only capable of WPA. The newer card has a non osx86 supported rt61 chip (only ppc driver available) and comes with wpa2 support.
 +
|free/WEP/WPA all fine with the rt driver
 +
|-
 +
|PCI Card
 +
|802.11b/g
 +
|DX-BGDTC
 +
|Dynex
 +
|Working with Broadcom 43xx Patch. 
 
|With patch
 
|With patch
 
|-
 
|-
Line 3,691: Line 5,852:
 
|DWL-G510 (rev. A)
 
|DWL-G510 (rev. A)
 
|D-Link
 
|D-Link
|For Atheros chip, use this guide: http://forum.insanelymac.com/index.php?showtopic=100551&st=0&p=717143&#entry717143
+
|For Atheros chip, use this guide: [http://forum.insanelymac.com/index.php?showtopic=100551&st=0&p=717143&#entry717143]
 
|No
 
|No
 +
|-
 +
|PCI Card
 +
|802.11a/b/g
 +
|DWL-G510 (rev. B)
 +
|D-Link
 +
|Atheros AR5005G (dev id: 168c 001a) - works w/iDeneb v1, Atheros wireless fix selected. [http://www.mediafire.com/?vtvrfzdit1p Atheros.pkg.zip]
 +
|No
 +
|-
 +
|PCI Card
 +
|802.11b/g
 +
|DWL-G520 rev.b
 +
|D-Link
 +
|AR5213 Chipset. working using [http://forum.insanelymac.com/index.php?s=&showtopic=40317&view=findpost&p=780131 this guide].  remember to first type sudo -s in terminal before entering code and repair disk permissions afterwards. WPA not working with manual config, but try [http://forum.insanelymac.com/index.php?s=&showtopic=40317&view=findpost&p=287826 this guide] to get it going (not tested). used Leo4all v3
 +
|No
 +
|-
 +
|PCI Card
 +
|802.11b/g
 +
|HWP-54G
 +
|Hawking
 +
|Used RT2500 "STA_CardbusPCI" Driver & Utility from Ralink Website - the Tiger version (dated 11-23-2006). Does not show up in System Profiler at all, but works if you disable ("Make Service Inactive") the wired ethernet port (en0). Also this was on an unmolested Kalyway 10.5.2 DVD Install.
 +
|No. Requires Driver, Utility, Settings tweaks.
 
|-
 
|-
 
|PCI Card
 
|PCI Card
Line 3,698: Line 5,880:
 
|EW7728In
 
|EW7728In
 
|Edimax
 
|Edimax
|Works beautifully using the Ralink 10.5 drivers at: http://www.ralinktech.com.tw/data/drivers/STA_RT2860%20D-1.0.0.0a%20UI-1.4.8.0_2007_11_26.dmg
+
|Works beautifully using the Ralink 10.5 drivers at: [http://www.ralinktech.com.tw/data/drivers/STA_RT2860%20D-1.0.0.0a%20UI-1.4.8.0_2007_11_26.dmg]
 
Doesn't connect as Airport, and must be configured using the Ralink Utility; configured as ethernet.  Occasional dropouts, but cause unconfirmed.  As a side note, this card works perfectly in Vista x64 as well, n-mode all the way!
 
Doesn't connect as Airport, and must be configured using the Ralink Utility; configured as ethernet.  Occasional dropouts, but cause unconfirmed.  As a side note, this card works perfectly in Vista x64 as well, n-mode all the way!
 
|No, see notes
 
|No, see notes
Line 3,706: Line 5,888:
 
|ENLWI-N
 
|ENLWI-N
 
|Encore
 
|Encore
|Works using Ralink 10.5 drivers http://www.ralinktech.com.tw/data/drivers/STA_RT2860%20D-1.0.0.0a%20UI-1.4.8.0_2007_11_26.dmg
+
|Works using Ralink 10.5 drivers [http://www.ralinktech.com.tw/data/drivers/STA_RT2860%20D-1.0.0.0a%20UI-1.4.8.0_2007_11_26.dmg]
 
|Yes
 
|Yes
 
|-
 
|-
Line 3,715: Line 5,897:
 
|Working OOB  
 
|Working OOB  
 
|Yes
 
|Yes
 +
|-
 +
|PCI Card
 +
|802.11b/g/n
 +
|TEW-623PI 1.0R
 +
|Trendnet
 +
|Working OOB
 +
|Yes
 +
|-
 +
|PCI Card
 +
|802.11b/g/n
 +
|TEW-623PI 2.0R
 +
|Trendnet
 +
|Apparently Trendnet changed their wireless chipset in the 2.0 version of the card to Ralink RT2860.  Card works if you use the drivers [http://www.ralinktech.com.tw/data/drivers/STA_RT2860%20D-1.0.0.0a%20UI-1.4.8.0_2007_11_26.dmg here] Note: if you are going to buy this card off newegg you will get the 2.0 version as of 7/25/08. Also of note the ralink software is a bit clunky compared to apple's airport setup in the system prefs.
 +
|No, see note.
 
|-
 
|-
 
|PCI Card
 
|PCI Card
Line 3,727: Line 5,923:
 
|WMP300N rev.2  
 
|WMP300N rev.2  
 
|Linksys
 
|Linksys
|Working OOB, recognized as an Apple Wireless Network Adapter. WiFi n Works fine and fast.  Works also With Vista 64Bits.
+
|Working OOB, recognized as an [[Apple Wireless Network Adapter]]. WiFi n Works fine and fast.  Works also With Vista 64Bits.
 
|Out of the Box
 
|Out of the Box
 
|-
 
|-
Line 3,783: Line 5,979:
 
|WG111v3 (Realtek's RTL8187 Chipset)
 
|WG111v3 (Realtek's RTL8187 Chipset)
 
|NETGEAR
 
|NETGEAR
|Detected as an Ethernet Controller with RTL8187L Drivers from [ftp://210.51.181.211/cn/wlan/87_Mac10.4_v1309.zip HERE], and working perfectly!
+
|Detected as an Ethernet Controller with RTL8187B Drivers from [http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=1&PFid=1&Level=6&Conn=5&DownTypeID=3&GetDown=false&Downloads=true], and working perfectly!
 
|Working with driver
 
|Working with driver
 
|-
 
|-
Line 3,797: Line 5,993:
 
|Wireless G USB (v4001 Zydas Chipset)
 
|Wireless G USB (v4001 Zydas Chipset)
 
|BELKIN
 
|BELKIN
|Working perfectly with drivers from http://mac.softpedia.com/get/Drivers/Zydas-WLAN-USB-driver.shtml on Leo4Allv2
+
|Working perfectly with drivers from [http://mac.softpedia.com/get/Drivers/Zydas-WLAN-USB-driver.shtml] on Leo4Allv2
 +
|Yes working with drivers
 +
|-
 +
|USB Adapter
 +
|802.11bgn
 +
|F5D8053
 +
|BELKIN
 +
|Working perfectly with drivers you can get from Totallybonkers here : [http://www.mac-forums.com/forums/showthread.php?p=685772#post685772]. Only tested with a 802.11g network with WEP.
 
|Yes working with drivers
 
|Yes working with drivers
 
|-
 
|-
Line 3,804: Line 6,007:
 
|WL-167g
 
|WL-167g
 
|ASUS
 
|ASUS
|First install Realtek Drivers from http://www.ralinktech.com/ralink/Home/Support/Macintosh.html (USB RT2870) Restart with -f and -v look for a ralink driver being loaded. Then go to Network in System Preferences, hopefully it will appear. Start USBWirelessUtility and check for the device status. If it doesn't work, check that the RT73USBWireless.kext is really loaded. In terminal kextstat, and look for com.Ralink.driver.RT73 (1.1.7). If it isn't there try sudo kextload RT73USBWireless.kext in terminal.  You might also have to add your ip settings manually in Network Preferences by clicking the plus sign above the lock and adding an ethernet device.
+
|First install Realtek Drivers from [http://www.ralinktech.com/ralink/Home/Support/Macintosh.html] (USB RT2870) Restart with -f and -v look for a ralink driver being loaded. Then go to Network in System Preferences, hopefully it will appear. Start USBWirelessUtility and check for the device status. If it doesn't work, check that the RT73USBWireless.kext is really loaded. In terminal kextstat, and look for com.Ralink.driver.RT73 (1.1.7). If it isn't there try sudo kextload RT73USBWireless.kext in terminal.  You might also have to add your ip settings manually in Network Preferences by clicking the plus sign above the lock and adding an ethernet device.
 
| It works ok now but i get some CRC errors and dropped frames, according to USBWirelessUtility. But i did download 4 gb torrents just fine...
 
| It works ok now but i get some CRC errors and dropped frames, according to USBWirelessUtility. But i did download 4 gb torrents just fine...
 
|-
 
|-
Line 3,826: Line 6,029:
 
|Airlink
 
|Airlink
 
|Working with 10.5.2 using Ralink driver. Connection utility kept hanging Shutdown until I cleared system caches. Cheap $45 Draft N card.
 
|Working with 10.5.2 using Ralink driver. Connection utility kept hanging Shutdown until I cleared system caches. Cheap $45 Draft N card.
 +
|Yes
 +
|-
 +
|PCI Card
 +
|802.11b/g
 +
|DWA-520
 +
|D-Link
 +
|Worked with iAtkos 2.0i 10.5.2.  Recognized as Airport extreme.  Select "Atheros for wireless" at install. After each reboot you must reconnect manually
 +
|Yes
 +
|-
 +
|PCI Card
 +
|802.11b/g/n
 +
|DWA-542
 +
|D-Link
 +
|Worked with Kalyway 10.5.2-10.5.5.  Recognized as Airport extreme.  Works out of the box.  Recognized on OEM Leopard Disk with Generic Boot 132 Loader.  Works Perfect
 
|Yes
 
|Yes
 
|-
 
|-
Line 3,848: Line 6,065:
 
|Working on Kalyway's 10.5.2 DVD installation using the following steps: a. Install Prasys drivers on Kalyway 10.5.1 with WUSB54GC working. b. Use Kext Helper b7 to install 10.5.1 IO80211Familykext and 3 RT* kext. c. Install Prasys 1.2 utility.
 
|Working on Kalyway's 10.5.2 DVD installation using the following steps: a. Install Prasys drivers on Kalyway 10.5.1 with WUSB54GC working. b. Use Kext Helper b7 to install 10.5.1 IO80211Familykext and 3 RT* kext. c. Install Prasys 1.2 utility.
 
|Yes, with replug
 
|Yes, with replug
 +
|-
 +
|USB Adapter
 +
|802.11 b/g
 +
|TEW-424UB V3.0R & V3.1R
 +
|TrendNet
 +
|Working with Kalyway 10.5.2 DVD and driver from [http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=1&PFid=1&Level=6&Conn=5&DownTypeID=3&GetDown=false&Downloads=true#RTL8187B Realtek]. Device Versions V3.0R and V3.1R use RTL8187B chipset, Versions V2 and V2.1R use SIS163. The original version A used the Zydas chipset.
 +
|Yes, but with extra driver
 
|-
 
|-
 
|USB Adapter
 
|USB Adapter
Line 3,855: Line 6,079:
 
|Detected as an Ethernet Controller with RTL8187L Drivers from [http://www.treiberupdate.de/treiber-download/download-163407-treiber-Realtek-RTL8187LWLANChip.html HERE], and working perfectly!
 
|Detected as an Ethernet Controller with RTL8187L Drivers from [http://www.treiberupdate.de/treiber-download/download-163407-treiber-Realtek-RTL8187LWLANChip.html HERE], and working perfectly!
 
|Working with driver
 
|Working with driver
|} . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+
|-
 +
|USB Adapter
 +
|802.11g
 +
|WL-169 v1 001
 +
|Sitecom
 +
|RTL-8187B driver can be downloaded from [http://www.realtek.com.tw/downloads/]
 +
|Working with driver
 +
|-
 +
|USB Adapter
 +
|802.11b/g
 +
|LW053
 +
|Sweex
 +
|Ralink RT2571WF driver can be downloaded from [http://www.ralinktech.com/ralink/Home/Support/Macintosh.html]
 +
|Working with driver, however creates problems with the detection of USB devices in general
 +
|-
 +
|USB Adapter
 +
|802.11g
 +
|Wi-Fire
 +
|hField Technologies
 +
|Uses their own wi-fi management utility. They have updated drivers at their website. This adapter is available retail at Microcenter and online at Amazon, Newegg, etc. As of June 08, runs ~$70. Works fine with manufacturer supplied drivers, good network pickup on directional receiver.
 +
|Working with manufacture supplied OSX 10.4/10.5 driver!
 +
|-
 +
|PCI Card
 +
|802.11b/g
 +
|USR5417
 +
|U.S. Robotics
 +
|Works Out of Box, detected as Airport.
 +
|Yes
 +
|-
 +
|PCI-Card
 +
|802.11b/g
 +
|TP-Link WN650G
 +
|TP-Link
 +
|Atheros 5212 chipset. Detected as AirPort after installing drivers from OSX86Tools
 +
|-
 +
|PCI Card
 +
|802.11b/g
 +
|WPC1810G
 +
|MOTOROLA
 +
|Working OOB, Detected as Airport, You have to go into network settings and add it to the list. After adding works like a charm
 +
|Yes
 +
|} . . .
  
 
===Wired (Ethernet) ===
 
===Wired (Ethernet) ===
Line 3,867: Line 6,132:
 
!Notes
 
!Notes
 
!Fully Working w/o Patch
 
!Fully Working w/o Patch
 +
|-
 +
|PCIe
 +
|10/100/1000BASE-T Ethernet
 +
|BCM5751 14e4:1677
 +
|Broadcom
 +
|iDenbe 10.5.5 - Edited kext AppleBCM5751Ethernet.kext: moved <string>pci14e4,1677</string> to bottom of array, MUST manually enter MAC address of your card in terminal; before each use: sudo ifconfig en0 ether 11:11:11:11:11:11
 +
|NO
 
|-
 
|-
 
|PCI
 
|PCI
 
|10/100baseT
 
|10/100baseT
|3c905c
+
|3c905x
 
|3Com
 
|3Com
|tested several PCI 3c90x compatible 10/100 cards, all worked fine
+
|tested several PCI 3c90x compatible 10/100 cards, some works fine (id:9055/Cyclone), some don't (id:9050/Boomerang)
 +
|-
 +
|USB
 +
|10/100
 +
|USB Lan adapter
 +
|Nintendo
 +
|*chipset AX88772
 
|working out of the box
 
|working out of the box
 
|-
 
|-
Line 3,881: Line 6,159:
 
|Product ID: 0x1780, Vendor ID: 0x0b9, Sys. Prof. shows "USB2.0 Gigabit Adapter"
 
|Product ID: 0x1780, Vendor ID: 0x0b9, Sys. Prof. shows "USB2.0 Gigabit Adapter"
 
|working out of the box
 
|working out of the box
 +
|-
 +
|USB2.0
 +
|10/100/1000baseT
 +
|MB442Z/A
 +
|Apple
 +
|Works OOB with Kalyway 10.5.2
 +
|Working OOB with Kalyway 10.5.2
 
|-
 
|-
 
|
 
|
Line 3,905: Line 6,190:
 
|
 
|
 
|
 
|
|PRO/100ve
+
|PRO/100 VE
 
|Intel
 
|Intel
|works with ASUSP4800vm.pkg also need IONetworking family.kext
+
|works with ASUSP4800vm.pkg also need IONetworking family.kext [http://www.insanelymac.com/forum/index.php?showtopic=25477&st=36 Download files]
 
|working 100% but require patch
 
|working 100% but require patch
 
|-
 
|-
Line 3,929: Line 6,214:
 
| Cisco
 
| Cisco
 
| Fully working with Darwin Tulip kext
 
| Fully working with Darwin Tulip kext
| http://forum.insanelymac.com/index.php?showtopic=6115&start=0&p=38422&#entry38422
+
| [http://forum.insanelymac.com/index.php?showtopic=6115&start=0&p=38422&#entry38422]
 
|-
 
|-
 
|
 
|
Line 3,947: Line 6,232:
 
|
 
|
 
|
 
|
| Netgear Gigabit PCI Adapter (GA311)
+
|Yukon 8042 PCIe
 +
|Marvell
 +
|just follow this : [http://www.insanelymac.com/forum/index.php?showuser=386918]
 +
|works fine then modified
 +
|-
 +
| PCI
 +
| 10/100/1000 baseT
 +
| Netgear Gigabit (GA311)
 
| Netgear
 
| Netgear
 
| Model:  GA311 Chipset: Realtek RTL8169S
 
| Model:  GA311 Chipset: Realtek RTL8169S
| Works out of the box
+
| Works out of the box. Bonjour works properly!
 
|-
 
|-
 
|
 
|
Line 3,958: Line 6,250:
 
| Chipset: Marvell Yukon2 (88E8053)
 
| Chipset: Marvell Yukon2 (88E8053)
 
| Works out of the box without patching
 
| Works out of the box without patching
 +
|-
 +
|
 +
|
 +
| Attansic L2 Fast Ethernet Adapter
 +
| Asus
 +
| Chipset: Attansic L2
 +
| Works with: AttansicL2Ethernet.kext [http://www.4shared.com/file/93302364/b1e420/AttansicL2Ethernet090219kext.html]
 
|-
 
|-
 
|
 
|
Line 3,964: Line 6,263:
 
| Asus
 
| Asus
 
| Chipset: Attansic L1
 
| Chipset: Attansic L1
| Works with [http://forum.insanelymac.com/index.php?showtopic=40851&st=300&gopid=707720&# DaemonES/MadInt driver]
+
| Works with [http://forum.insanelymac.com/index.php?showtopic=40851&st=300&gopid=707720&# DaemonES/MadInt driver] but no function at wake up from sleep
 +
|-
 +
|
 +
|
 +
| D-Link DFE-520TX
 +
| D-Link
 +
| Works with driver Viarhine.pkg included in iAtkos v. 2.0i DVD
 +
| Works with patch
 
|-
 
|-
 
|
 
|
Line 3,974: Line 6,280:
 
   ks out of the box w/o patch
 
   ks out of the box w/o patch
 
|-
 
|-
 +
| PCI
 
|
 
|
|
+
| Netgear Gigabit (FA311)
| Netgear Gigabit PCI Adapter (FA311)
+
 
| Netgear
 
| Netgear
 
| Model:  FA311 Chipset: Realtek RTL8139D
 
| Model:  FA311 Chipset: Realtek RTL8139D
 
| Working 100% out of the box w/o patch
 
| Working 100% out of the box w/o patch
 
|-
 
|-
 +
|PCI
 +
|
 +
|FNC-0109TX
 +
|Level One
 +
|Realtek RTL8139
 +
|working out of the box
 +
|-
 +
| PCIe
 +
|
 +
| Realtek pcie gbe family 8168
 +
|
 +
| Works with realtek1000 kext
 +
|
 +
|-
 +
|}
  
 
+
. . . . . . . . .
|} . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+
  
 
== Sound Cards ==
 
== Sound Cards ==
Line 3,993: Line 6,313:
 
!Notes
 
!Notes
 
!Fully Working w/o Patch
 
!Fully Working w/o Patch
 +
|-
 +
|0202
 +
|E-MU
 +
|It requires USB 2.0. After installation of supplied drivers it works fully. Both input and output work, eventhough the E-MU 0202 control panel doen't launch on AMD machine (it doesn't affect functionality of audio interface)
 +
|Yes
 
|-
 
|-
 
|ALC888 (onboard)
 
|ALC888 (onboard)
 
|Realtek
 
|Realtek
 
|Require [http://forum.insanelymac.com/index.php?s=&showtopic=32859 AppleHDA Patcher] v1.2 and a Linux [http://psykopat.free.fr/apple/AppleHDA/sigmatel/ dump]
 
|Require [http://forum.insanelymac.com/index.php?s=&showtopic=32859 AppleHDA Patcher] v1.2 and a Linux [http://psykopat.free.fr/apple/AppleHDA/sigmatel/ dump]
 +
or ALC888audio.mpkg (6 channel and inputs)
 
|No, Need patch
 
|No, Need patch
 +
|-
 +
|ALC888 (onboard) Acer
 +
|Realtek
 +
|Works on Acer Aspire 5920G (Kalyway 10.5.2 install DVD)
 +
|Yes
 
|-
 
|-
 
|ALC888 (onboard) Dell 530
 
|ALC888 (onboard) Dell 530
Line 4,003: Line 6,334:
 
|Require [http://forum.insanelymac.com/index.php?s=&showtopic=32859 AppleHDA Patcher] v1.20 and a Linux [http://forum.insanelymac.com/index.php?showtopic=104644 dump]
 
|Require [http://forum.insanelymac.com/index.php?s=&showtopic=32859 AppleHDA Patcher] v1.20 and a Linux [http://forum.insanelymac.com/index.php?showtopic=104644 dump]
 
|No, Need patch
 
|No, Need patch
 +
|-
 +
|ALC888 (onboard) Dell 530
 +
|Intel Corporation HD Audio Controller [8086:293e] (rev 02)
 +
|
 +
*'''Solution 1''': Delete ALCinject.kext, install HDAEnabler.kext & AppleHDA.kext from here [http://www.mediafire.com/?hjaddnmzq1w Dell_530_audio.zip] (front panel headphone/mic work as well as all audio in/out)
 +
*'''Solution 2''': [http://www.mediafire.com/?7id1c5uhfue HDA_ICH9_ALC888.zip] (front panel headphone/mic not working)
 +
|No, Need patch
 +
|-
 +
|ALC888 (onboard - ICH7 Shuttle SG31G2)
 +
|Realtek
 +
|Used this [http://forum.insanelymac.com/index.php?act=attach&type=post&id=6739 installer] and it worked quite well.  Have not tested optical out or audio in. Stereo works with this patch
 +
|You gotta patch it.
 
|-
 
|-
 
|ALC888 (nForce 430 chipset onboard)
 
|ALC888 (nForce 430 chipset onboard)
Line 4,011: Line 6,354:
 
|ALC889A
 
|ALC889A
 
|Realtek
 
|Realtek
|Onboard Sound. Requires [http://forum.insanelymac.com/index.php?showtopic=95910 ALCinject and patched AppleHDA].
+
|onboard Sound. requires patch found at [http://rapidshare.com/files/51585161/alc889a.zip.html Rapid Share]
|No. Once patched, all in/out working (AZALIA)
+
* [Updated by Muhammad Anil Babur Kiani]
 +
|Note. Once patched, in/out works. Detail Description at [http://www.insanelymac.com/forum/lofiversion/index.php/t52254.html Insanelymac]
 +
|-
 +
|Creative Sound Blaster Live
 +
|Creative Labs
 +
|Works with kxAudio Beta driver 1.1b1 under Kalyway 10.5.2. Requires [http://download.kxproject.lugosoft.com/downloads/kXAudioDriver-1.1b0.dmg Insanelymac]
 +
|Yes output works with patch. Input options are grayed out.  [Tested By Muhammad Anil Babur Kiani]
 +
 
 
|-
 
|-
 
|Audigy 2 ZS Platinum
 
|Audigy 2 ZS Platinum
 
|Creative Labs
 
|Creative Labs
|Doesn't Work
+
|Works with kxAudio Beta driver 1.1b1 under Kalyway 10.5.3 and 10.5.4. Requires [http://download.kxproject.lugosoft.com/downloads/kXAudioDriver-1.1b1.dmg]
 +
|Yes output works with patch. Input options are grayed out.
 +
|-
 +
|Revolution 7.1
 +
|M-Audio
 +
|Works
 +
|No, but everything works with driver found [http://www.audio-evolution.com/drivers/ here].
 +
|-
 +
|Audiophile 2496
 +
|M-Audio
 +
|Doesn't Work - no intel PCI M-Audio drivers (likely due to no real Intel Macs with PCI)
 
|No
 
|No
 +
|-
 +
|Audiophile USB
 +
|M-Audio
 +
|Drivers from [http://www.m-audio.com M-Audio]
 +
|Yes
 +
|-
 +
|Firewire 410
 +
|M-Audio
 +
|Drivers from [http://www.m-audio.com M-Audio]
 +
|Yes
 
|-
 
|-
 
|AureonDUAL USB
 
|AureonDUAL USB
Line 4,028: Line 6,398:
 
|Works out of the box. I took this old card from a bunch of 5 or 6 old sound cards. I tried them all and none worked. I was about to give up, but I decided to give this one a try... And it Worked!!! If you have an old Compaq Computer with a sound card, see if it has one of these sound cards.
 
|Works out of the box. I took this old card from a bunch of 5 or 6 old sound cards. I tried them all and none worked. I was about to give up, but I decided to give this one a try... And it Worked!!! If you have an old Compaq Computer with a sound card, see if it has one of these sound cards.
 
|Yes
 
|Yes
 +
|-
 +
|-
 +
|DELTA 1010
 +
|M-Audio
 +
|Requires ENVY24 kext [http://audio-evolution.com/drivers found here]
 +
|Needs patch and then still doesn't have soundcard menu access for levels etc - but audio works.
 
|-
 
|-
 
|SigmaTel 9220 (onboard)
 
|SigmaTel 9220 (onboard)
Line 4,052: Line 6,428:
 
|Require [http://forum.insanelymac.com/index.php?s=&showtopic=32859 AppleHDA Patcher] v1.2 and a Linux [http://psykopat.free.fr/apple/AppleHDA/sigmatel/ dump]
 
|Require [http://forum.insanelymac.com/index.php?s=&showtopic=32859 AppleHDA Patcher] v1.2 and a Linux [http://psykopat.free.fr/apple/AppleHDA/sigmatel/ dump]
 
|No, need patch
 
|No, need patch
 +
|-
 +
|SL-8850
 +
|SpeedLink
 +
|works OOB
 +
|yes
 
|-
 
|-
 
|UA-1EX
 
|UA-1EX
 
|Edirol
 
|Edirol
|Drivers from Edirol
+
|Drivers from Edirol [http://www.rolandus.com/products/productdetails.aspx?dsection=d_downloads&ObjectId=743]
|No, need driver
+
|Does not work with current drivers.
 
|-
 
|-
|Firewire 410
+
|AudioFire 2
|M-Audio
+
|Echo Audio
|Drivers from [http://www.m-audio.com M-Audio]
+
|Works out of the box. Tested with iTunes, Logic 8 pro, Garage Band, Ableton Live and more.
|Yes
+
|Yes, with OSX driver from [http://echoaudio.com/Downloads/MacOSX_Software.php Echo Audio]  
 
|-
 
|-
 
|MOTU Ultralite
 
|MOTU Ultralite
 +
|MOTU
 +
|External FireWire Audio Interface. Tested with Logic 8 Pro, iTunes, Quicktime, etc -- all working flawlessly.
 +
|Works w/ standard Leopard driver from [http://www.motu.com/download MOTU])
 +
|-
 +
|MOTU 828MKII firewire
 
|MOTU
 
|MOTU
 
|External FireWire Audio Interface. Tested with Logic 8 Pro, iTunes, Quicktime, etc -- all working flawlessly.  
 
|External FireWire Audio Interface. Tested with Logic 8 Pro, iTunes, Quicktime, etc -- all working flawlessly.  
Line 4,072: Line 6,458:
 
|External FireWire Audio Interface. Works perfectly in 400 and 800 (w/ 800 card) in Logic 8, iTunes.
 
|External FireWire Audio Interface. Works perfectly in 400 and 800 (w/ 800 card) in Logic 8, iTunes.
 
|Works OOB with OSX drivers from RME [http://www.rme-audio.de/en_downloads.php?page=content/downloads/en_downloads_driver&subpage=content/downloads/en_downloads_driver_fireface])
 
|Works OOB with OSX drivers from RME [http://www.rme-audio.de/en_downloads.php?page=content/downloads/en_downloads_driver&subpage=content/downloads/en_downloads_driver_fireface])
 +
|-
 +
|RME HDSP 9632
 +
|RME
 +
|Internal PCI Audio Interface. Works perfectly in Logic 8, iTunes.
 +
|Works OOB with OSX drivers from RME
 +
|-
 +
|RME HDSP PCI rev. 1.8 + Multiface II
 +
|RME
 +
|Internal PCI HDSP rev. 1.8 + external Multiface II + external power supply. Works perfectly in Logic 8, iTunes.
 +
|Works OOB with OSX drivers from RME
 +
|-
 +
|RME HDSP PCI rev. 1.8 + Hammerfall DSP Digiface
 +
|RME
 +
|Internal PCI HDSP rev. 1.8 + external Hammerfall DSP digiface + external power supply. Works perfectly in Logic 8, iTunes.
 +
|Works OOB with OSX drivers from RME. It's a real pleasure, try it!!!
 
|-
 
|-
 
|Apogee Duet
 
|Apogee Duet
Line 4,082: Line 6,483:
 
|PCI sound card. must use CMI8738 driver with kext helper in order to only get two channels (only my front two speakers work, not the rear ones). neither did the center channel in surround sound.
 
|PCI sound card. must use CMI8738 driver with kext helper in order to only get two channels (only my front two speakers work, not the rear ones). neither did the center channel in surround sound.
 
|google CMI8738 kext.
 
|google CMI8738 kext.
|} . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+
|-
 +
|USB Gamers Headset
 +
|Logitech
 +
|USB Gamers headset with microphone. Works fine with 10.4.8, 10.4.11 and 10.5.2. When using with Leopard, the device needs to be plugged in during boot or you have to manually change the sound output to the device in the sound configuration utility. Sound is great, has a volume control on the cord that works correctly including the Apple sound graphic on the screen. CPU is not under load while playing sound and the microphone works great.
 +
|Available retail everywhere (Circuit City, Best Buy, etc) and retails around $30. Cheap sound solution for laptop users whose sound chip is not supported by OSX.
 +
|-
 +
|USB Stereo Headset with Microphone
 +
|Cyber Acoutics
 +
|USB Stereo Headset with Microphone. Works fine with Kalyway 10.5.2.  
 +
|Yes
 +
|-
 +
|Tascam US-122
 +
|Tascam
 +
|Works OOB with OSX drivers from [http://www.tascam.com/products/us-122;9,15,68,19.html Tascam]
 +
|Yes
 +
|-
 +
|Toshiba Multimedia Centre (USB)
 +
|Toshiba
 +
|Works OOB gives 5.1 + SPDIF and you also get LAN and 4 USB Sockets that work OOB as well no drivers needed
 +
|Yes
 +
|-
 +
|} .
  
 
== Other Accessories ==
 
== Other Accessories ==
Line 4,102: Line 6,524:
 
|Yes
 
|Yes
 
|-
 
|-
 +
|Remote Control for Front Row
 +
|Keyspan RF Remote for Front Row
 +
|Keyspan
 +
|
 +
*Works out of the box
 +
*USB interface
 +
|Yes
 +
|-|
 +
|-
 +
|IR Reciever for Mac (Front Row, VLC, iTunes, etc)
 +
|Manta TR1 USB IR Receiver
 +
|Mira [http://twistedmelon.com/mira/hardware.html]
 +
|
 +
*Unfortunately this only worked for me on GA-EP45-DS3L when I bought their software. You should buy it anyway if you have a Mac or OSX86 machine because it's really cool.
 +
*USB interface
 +
|Seems like you have to buy the software to make this work on OSX86.
 +
|-|
 
|Mobile Audio Interface
 
|Mobile Audio Interface
 
|Transit
 
|Transit
Line 4,107: Line 6,546:
 
|Works with drivers from manufacturer site
 
|Works with drivers from manufacturer site
 
|No, needs official drivers
 
|No, needs official drivers
 +
|-
 +
|Bluetooth Dongle
 +
|BT-USB
 +
|Kinamax
 +
|Works OOB (Note Class 1 328 ft range)
 +
|Yes
 +
|-
 +
|Bluetooth Dongle
 +
|VP6494
 +
|Interlink
 +
|Works OOB
 +
|Yes
 
|-
 
|-
 
|Bluetooth Dongle
 
|Bluetooth Dongle
Line 4,117: Line 6,568:
 
|Logitech BT Mini-Receiver from MX5000 desktop set (keyboard & mouse)
 
|Logitech BT Mini-Receiver from MX5000 desktop set (keyboard & mouse)
 
|Logitech
 
|Logitech
|Works using the kext from this thread http://forum.insanelymac.com/index.php?showtopic=94113&st=0&p=742268&#entry742268 .
+
|Works using the kext from this thread [http://forum.insanelymac.com/index.php?showtopic=94113&st=0&p=742268&#entry742268]
 
|No
 
|No
 
|-
 
|-
Line 4,129: Line 6,580:
 
|BCU32
 
|BCU32
 
|Mobidick
 
|Mobidick
 +
|Works OOB
 +
|Yes
 +
|-
 +
|USB Bluetooth Dongle
 +
|ABT201
 +
|Airnet
 
|Works OOB
 
|Works OOB
 
|Yes
 
|Yes
Line 4,153: Line 6,610:
 
|ACB10US
 
|ACB10US
 
|Targus
 
|Targus
 +
|Works OOB
 +
|Yes
 +
|-
 +
|USB Bluetooth Dongle
 +
|33902
 +
|Kensington
 +
|Works OOB
 +
|Yes
 +
|-
 +
|USB Bluetooth Dongle
 +
|F8T016NE
 +
|Belkin
 
|Works OOB
 
|Works OOB
 
|Yes
 
|Yes
Line 4,166: Line 6,635:
 
|Kingfox
 
|Kingfox
 
|Works OOB.
 
|Works OOB.
 +
|Yes
 +
|-
 +
|USB Bluetooth Dongle
 +
|8E4178 Palladio USB BT 100
 +
|digicom
 +
|Works OOB.
 +
|Yes
 +
|-
 +
|USB Bluetooth Dongle
 +
|WBT100
 +
|Auvi
 +
|Works OOB
 +
|Yes
 +
|-
 +
|USB IrDa Dongle
 +
|F5U235ea
 +
|Belkin
 +
|Don't Work
 +
|No
 +
|-
 +
|Creative Fatal1ty USB Headset
 +
|HS-1000
 +
|Creative
 +
|Works OOB
 
|Yes
 
|Yes
 
|-
 
|-
Line 4,221: Line 6,714:
 
|Click, 4 way scroll and DPI adjustments work fine. Back button does not
 
|Click, 4 way scroll and DPI adjustments work fine. Back button does not
 
|Mostly
 
|Mostly
 +
|-
 +
|Keyboard
 +
|Aluminum flat USB Keyboard
 +
|Apple
 +
|All keys work inlcuding the Apple specific function keys. Does not work when installing Mac OS, need a PS2 keyboard
 +
|Yes
 +
|-
 +
|Keyboard
 +
|Mac Pro Keyboard (clear)
 +
|Apple
 +
|Everything works OOB during and after install - some usb devices may not work in attached usb ports...systems sometimes complains that there is not enough power to run the devices.
 +
|Yes
 
|-
 
|-
 
|Keyboard
 
|Keyboard
Line 4,233: Line 6,738:
 
|Fully works after Logitech Control Center installed
 
|Fully works after Logitech Control Center installed
 
|No, Cmd & Alt keys switched
 
|No, Cmd & Alt keys switched
 +
|-
 +
|Keyboard/ Gaming Keyboard
 +
|Eclipse II
 +
|Saitek
 +
|Mostly works, media buttons are screwed up:
 +
*Stop button does mute/unmute
 +
*Play/Pause button is volume down
 +
*Forward button works
 +
*Back button does back, or Play/Pause if you hold it for a second.
 +
*Volume up, down, and mute keys do nothing.
 +
*Number pad enter key does not work.
 +
*Color change works.
 +
|No, but the important parts do.
 
|-
 
|-
 
|Gaming keyboard
 
|Gaming keyboard
Line 4,244: Line 6,762:
 
|Wacom
 
|Wacom
 
|Works OOB
 
|Works OOB
 +
|Yes
 +
|-
 +
|Graphics tablet
 +
|CTE-440 Graphire 4
 +
|Wacom
 +
|Works OOB - Download latest Graphire 4 software for Mac from Wacom website for best integration with applications.
 
|Yes
 
|Yes
 
|-
 
|-
Line 4,257: Line 6,781:
 
|Works OOB  
 
|Works OOB  
 
|Yes
 
|Yes
 +
|-
 +
|3G Modem
 +
|E272
 +
|Huawei
 +
|Works OOB
 +
|YES
 +
|-
 +
|3G Modem
 +
|E172
 +
|Huawei
 +
|Doesn't work
 +
|Doesn't work
 
|-
 
|-
 
|Mouse
 
|Mouse
Line 4,289: Line 6,825:
 
|-
 
|-
 
|PCI-E Card (1x)
 
|PCI-E Card (1x)
|Rosewill RC-211 2 Port SATA RAID Card (Silicon Image Chipset)
+
|SATA RAID Card 2 Ports
 +
|Rosewill RC-211 (Silicon Image Chipset)
 
|Set the jumper to deactivate the raid bios (unless you need it). <br />Needs OS X driver: [http://www.siliconimage.com/support/supportsearchresults.aspx?pid=32&cid=3&ctid=2&osid=3& driver]  
 
|Set the jumper to deactivate the raid bios (unless you need it). <br />Needs OS X driver: [http://www.siliconimage.com/support/supportsearchresults.aspx?pid=32&cid=3&ctid=2&osid=3& driver]  
 
|Yes
 
|Yes
 +
|-
 +
|PCI Express Card
 +
|SATA RAID Card 1 Port
 +
|Silicon Image 3531
 +
|Needs OS X driver: [http://www.siliconimage.com/support/supportsearchresults.aspx?pid=32&cid=3&ctid=2&osid=3& driver] patch Plist.Info with 0x35311095 PCIID
 +
|Yes
 +
|-
 +
|PCI Card
 +
|PATA RAID Card 2 Ports
 +
|Silicon Image Chipset 0680(A)
 +
|No Driver by Vendor / Manufacturer, Not tested any (maybe) existing driver from 3rd person
 +
|No
 
|-
 
|-
 
|Scanner
 
|Scanner
Line 4,298: Line 6,847:
 
|Works with the driver from manufacturer's site/CD
 
|Works with the driver from manufacturer's site/CD
 
|Yes
 
|Yes
 +
|-
 +
|Scanner
 +
|hp 4670
 +
|HP
 +
|Does not work with Leopard 10.5.4.  It reportedly works with earlier versions of Leo and Tiger.
 +
|No
 
|-
 
|-
 
|Tablet
 
|Tablet
Line 4,310: Line 6,865:
 
|[http://www.echostore.com/skype-phone-lcd-usb.html URL]
 
|[http://www.echostore.com/skype-phone-lcd-usb.html URL]
 
|Yes
 
|Yes
 +
|-
 +
|USB Phone
 +
|VoIPtel 40
 +
|Hagenuk
 +
|sound in + out working OOB, keys doesn't work
 +
|No
 
|-
 
|-
 
|USB Sound Card
 
|USB Sound Card
Line 4,327: Line 6,888:
 
|Pinnacle Systems
 
|Pinnacle Systems
 
|Works with EyeTV w/o Patch
 
|Works with EyeTV w/o Patch
 +
|Yes
 +
|-
 +
|TV Tuner
 +
|WinTV HVR 950 (black)
 +
|Hauppauge
 +
|Works with EyeTV 3.0.3 ONLY
 
|Yes
 
|Yes
 
|-
 
|-
Line 4,334: Line 6,901:
 
|Works OOB
 
|Works OOB
 
|Works OOB
 
|Works OOB
 +
|-
 +
|Webcam
 +
|from BenQ 24" Display
 +
|BenQ
 +
|Fully working
 +
|Yes
 +
|-
 +
|Webcam
 +
|Playstation EYE HD
 +
|Sony
 +
|Fully working OOB
 +
|Macam / iUSBcam
 
|-
 
|-
 
|Webcam
 
|Webcam
Line 4,340: Line 6,919:
 
|Video working with macam or iUSBcam but picture quality is not good and some settings are missing. iChat recognizes the webcam but Photo booth doesn't. Hopefully next version of macam will be better.
 
|Video working with macam or iUSBcam but picture quality is not good and some settings are missing. iChat recognizes the webcam but Photo booth doesn't. Hopefully next version of macam will be better.
 
|Built-in mic not working
 
|Built-in mic not working
|-
 
 
 
|-
 
|-
 
|Webcam
 
|Webcam
Line 4,352: Line 6,929:
 
|QuickCam Pro 9000
 
|QuickCam Pro 9000
 
|Logitech
 
|Logitech
|Video and mic work very well in Photo Booth, iChat, quicktime and garage band. Mic works iMovie, but video doesn�t (you can still recored in quicktime or photo-booth and import.)
+
|Video and mic work very well in Photo Booth, iChat, quicktime and garage band. Mic works iMovie, but video doesnt (you can still recored in quicktime or photo-booth and import.)
 
|Video not working in iMovie
 
|Video not working in iMovie
 
|-
 
|-
Line 4,358: Line 6,935:
 
|Quickcam Messenger
 
|Quickcam Messenger
 
|Logitech
 
|Logitech
|Fully works with [http://webcam-osx.sourceforge.net/ maccam]. Video and microphone work.
+
|Video and microphone works with [http://webcam-osx.sourceforge.net/ maccam]. But not with ichat!!! Max. 4 frames per second (Windows/Linux/Leopard). 
 +
|No
 +
|-
 +
|Webcam
 +
|Philips SPC500NC
 +
|Philips
 +
|Partially works with [http://webcam-osx.sourceforge.net/ maccam]
 
|No
 
|No
 
|-
 
|-
Line 4,371: Line 6,954:
 
|Logitech
 
|Logitech
 
|Fully working OOB
 
|Fully working OOB
 +
|Yes
 +
|-
 +
|Webcam
 +
|Quickam S 5500
 +
|Logitech
 +
|Fully working OOB
 
|Yes
 
|Yes
 
|-
 
|-
Line 4,390: Line 6,979:
 
|Fully working OOB bad image
 
|Fully working OOB bad image
 
|Yes
 
|Yes
 +
|-
 +
|Webcam
 +
|RF-NBCAM
 +
|Rocketfish
 +
|Works with Drivers provided, does not work in iChat (says so right in manual)
 +
|No
 +
|-
 +
|Webcam
 +
|VGA Single Chip - USB (0x2600)
 +
|Pixart Imaging Inc. (0x093a)
 +
|Doesnt Work OOTB
 +
|No
 
|-
 
|-
 
|Audio Interface
 
|Audio Interface
Line 4,396: Line 6,997:
 
|Fully working OOB
 
|Fully working OOB
 
|Yes
 
|Yes
 +
|-
 +
|Audio Interface (Firewire)
 +
|Helix 18 Board
 +
|Phonic
 +
|Works OOB
 +
|Yes
 +
|-
 +
|USB Audio Speakers
 +
|Companion 5
 +
|Bose
 +
|Fully working OOB, even getting audio after original install. Zero setup.
 +
|Yes. No patch required as appropriate USB drivers are built-in.
 
|-
 
|-
 
|USB Printer
 
|USB Printer
Line 4,421: Line 7,034:
 
|Yes
 
|Yes
 
|-
 
|-
|-|} . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+
|FireWire 800 PCI-E
 +
|89153
 +
|DELOCK
 +
|Works OOB.
 +
|Yes
 +
|-
 +
|FireWire 400 PCI
 +
|BYTECC PG-FW-310 Firewire PCI Card
 +
|BYTECC
 +
|Works OOB. NO patch needed.
 +
|Yes
 +
|-
 +
|FireWire 400 PCI
 +
|PCI Firewire 1394 VIA 3x6P
 +
|PCtronix
 +
|Works OOB. NO patch needed. Chipset VIA VT6306
 +
|Yes
 +
|-
 +
|FireWire 400 PCI
 +
|SYBA IEEE 1394a Model: SD-VIA-FW1E1H
 +
|SYBA
 +
|Works OOB. No patch needed
 +
|Yes
 +
|-
 +
|FireWire 400/800 PCI and PCI-X
 +
|PCI-32T
 +
|SIIG
 +
|Works OOB. No patch.
 +
|Yes
 +
|-
 +
|}

Latest revision as of 23:36, 2 October 2017

Template:10.5.2

This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for 10.5.2 builds only.

For how to edit the Wiki, please see this thread. Thank you!


Contents

[edit] Motherboards

[edit] Abit

INTEL CPU

Hardware Name (alphabetical)ƒ Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
AB9 Pro Intel P965 & ICH8R
  • Install Method (1): Leo4All v3
  • BIOS Version: 22
  • Audio: Works
  • LAN: Works
  • Install Instructions:
    1. Formatted as Fat32 using XP and Acronis (could've used anything), then erased with disk utility in OSX install
    2. Installed using Vanilla Kernel, and default SMBIOS selections under customize
    3. Complete Install and Reboot
    4. Use -v on first boot
    5. Used NVKush found here
    6. Update to 10.5.6 worked but not fully tested yet (using DSDT Patcher and OSX86 Tools.) Followed the guide here

  • Install Method (2): Kalyway 10.5.2 dvd rom (SATA works - had problems using IDE optical drive)
  • BIOS Version: 22
  • LAN: Works OOB
  • USB: Some problems, solved using USB fix kext (see right ->>)
  • SOUND: Onboard works OOB, but requires kext for custom soundcards like M-Audio here
  • VID RESOLUTION: Depends on vid card, see here for hd48xx thread!
  • Install Instructions:
    1. Installed via sata dvdrom (IDE not recognised) found here
    2. Seperate Sata HDD formatted (fat32) using Installer and installed onto
    3. Vanilla kernel worked fine, don't add or change anything yet at install.
    4. Use -v on first boot
EFI & Vanilla Kernel works

Works out of box!

No patch needed for LAN

Kalyway USB fix here (if needed) Get kexthelperB7 to install kexts from cheetha.net

AB9 QuadGT Intel P965 & ICH8R
  • Install Method: Kalyway 10.5.1 & Combo Update
  • BIOS Version: Unknown; Revision: Unknown
  • Audio: Works with patch below
  • LAN: Unknown
  • SATA & IDE: Problem
  • Install Instructions:
    1. Partitioned as MBR
    2. Installed using Vanilla Kernel, and MBR selections under customize
    3. Complete Install and Reboot
    4. Use -x on first boot
    5. Setup First boot in safemode
    6. Use kexthelper (here) to install kexts below
    7. Install Sound Driver for Onboard sound from here
EFI & Vanilla Kernel works Audio Needs patching
AW9D-MAX Intel 975X
  • Install Method: Leopard-10.5.2-AMD-EFI.iso DVD
  • BIOS Version: 15; Board Revision: 1
  • Audio: WORKS With AzaliaAudio (from DVD)
  • LAN: Both WORK OOB
  • SATA & IDE: Works OOB (SouthBridge SiliconImage Driver from DVD used)
  • ATI Sapphire 3870 works (if you find the right combination of drivers to install from the DVD...)
EFI w/ Vanilla Kernel WORKS SiliconImage3132.kext has some ownership problems. chmod/chown + reboot makes the pain go away.
IC7-G Intel 875PE
  • Install Method: Kalyway 10.5.1 with 10.5.2 KalywayComboUpdate
  • BIOS Version: 28; Revision: Unknown
  • Audio: Works OOB
  • LAN: Works OOB, no auto-detect at starup, need to disconnect and reconnect to work
  • SATA & IDE: Works OOB
Unknown LAN has auto-connect problems
IP35 Pro Intel P35 + ICH9R Chipset
  • Install method: Kalyway 10.5.1 or Retail Mac OS X Server 10.5 DVD w/ PC-EFI & Combo Updater
  • Kalyway:
  • Install options: Formatted GUID, EFIv8 + Vanilla Kernel
  • Updated to 10.5.2 using Kalyway Intel combo update + Kalyway 10.5.2 kernel
  • Leopard Graphics Update v1.0 worked with no hassle
  • Bios version: 1.4, Rev. unknown
  • Bios setup: SATA set to AHCI; EIST: enabled, Disable bit: enabled
  • Audio works with: AppleHDAPatcher v1.20 + ncx5 ALC888 dump
  • SATA works as AHCI
  • IDE status: unknown
  • LAN works out of the box
  • Firewire works out of the box
  • Mac OS X Server:
  • BIOS Version: 14
  • Audio: Realtek ALC888 HD, AppleHDA patch
  • LAN: 2x OnBoard Gigabit LAN, no patch (can't remember controller-name)
  • SATA & IDE: 6 Built-In S-ATA ports in AHCI, 2 eSATA ports in AHCI (JMicron), 1 IDE port (JMicron), and 1 floppy port (JMicron). All working.
EFIv8 + Vanilla kernel No; Audio needs patching
IP35P Intel® P35/ICH9 Chipset
  • Install method: Kalyway 10.5.2
  • Kalyway:
  • Install options: Formatted GUID, EFIv8 + Vanilla Kernel
  • Updated to 10.5.4 from Apple Site + using Kalyway Intel combo update 10.5.3 + Kalyway 10.5.2 kernel
  • Leopard Graphics Update v1.0 worked with no hassle
  • Bios version: 11, Rev. unknown
  • Bios setup: SATA set to AHCI; EIST: enabled, Disable bit: enabled
  • Audio: Currently not working
  • SATA works as AHCI
  • IDE status: Working out of box
  • LAN Working out of the box
  • Firewire Working out of the box
  • Audio: Unknown
  • LAN: 1x Gigabit
  • SATA & IDE: 6 Built-In S-ATA ports in AHCI, 2 eSATA ports in AHCI (JMicron), 1 IDE port (JMicron), and 1 floppy port (JMicron). All working.
EFIv8 + Vanilla kernel No; Audio Currently Not Working
IP35-E Intel P35
  • Install Method: Kalyway 10.5.1 & Apple 10.5.2 Update
  • BIOS Version: 15; Revision: Unknown
  • Audio: Need patch from here or essay
  • LAN: Works OOB
  • SATA & IDE: SATA works OOB, IDE works after install
  • Optical Drive: Which one? Any weird problems with installation?
  • Shutdown / reboot works only with 10.5.1 - needs custom kernel for 10.5.2, Sleep not tested
Vanilla & EFI works Audio needs patching
IX38 Roadster Intel X38 + ICH9R Chipset
  • Install Method: BrazilMAC 10.5.0 (Updated to 10.5.2 using Kalyway Intel combo update)
  • BIOS Version: 12
  • Audio works with: AppleHDAPatcher v1.20 + ncx5 ALC888 dump
  • LAN: Works Native
  • SATA & IDE: SATA works in AHCI mode. Does not work in RAID mode.
  • Firewire works out of the box
EFI/Vanilla kernel: Not Tested No, audio needs patching.
LG-95 Intel 945GC + ICH7
  • BIOS version: 10, Rev. 1.0
  • Installation (10.5.0) method: BrazilMAC method with EFI 8.0 on GPT using iGuru guide
  • Update to 10.5.2: Netkas method
  • Audio (ALC 888): Works with skippyretard patch
  • Video (GMA 950): Works with modified AppleIntelIntegratedFramebuffer.kext from BrazilMAC guide
  • LAN: Works out of the box
  • IDE and SATA: Works out of the box
  • ACPI: Sleep/Wake/Restart work (Shutdown works half of time)
Yes No, audio and video need patching
LG-95 Intel 945GC + ICH7
  • BIOS version: 14
  • Installation method: Leo4all v2 (10.5.2) with Vanilla Kernel 9.2.2
  • Audio (ALC 883): 2ch only so far. Works with Azalia patch from skippyretard. Tried the 883 kexts from Leo4all v2 install, latest Taruga's 5.1 kext (April 24th, 2008) and mens wetsuits skippyretard's 883 pkg with no luck. Linux reconizes ALC883 OK. Maybe the guy up here with an ALC888 has a different mobo revision.
  • Video (GMA 950): Works with GMA950 driver from the Leo4all install DVD. QE/CI enabled and no artifacts. Resolution fixed at 1024x768, I changed it editing com.apple.Boot.plist adding <string>"Graphics Mode"="[email protected]"</string>. There is some minor mouse blinking when moving over the dock, hardly noticeable.
  • LAN: Works out of the box
  • IDE and SATA: Works out of the box
  • ACPI: Restart & Shutdown works fine so far.
  • PROs: Very cheap and compatible.
  • CONs: NOT an overclocker motherboard, FSB is locked in the Bios.
Yes No, audio needs patching
Fatal1ty F190-HD ATi Radeon Xpress 1250
  • Install Method: Kalyway 10.5.1 - 10.5.2 Kalyway Combo Update
  • BIOS Version: Modded from Abit Forum; Revision: 17
  • Audio: Realtek ALC888, Download Installer Here
  • LAN: Works OOB
  • SATA & IDE: IDE and SATA full Function OOB however you must use SATA channels in order i.e. miss something plugged in on the first sata channel and the installer will not find anything in channels 2, 3 and 4 and you will get 'IOATAStorage controller' blocking Bus error in verbose mode.
  • Optical Drive: LG Sata DVD-RW/RAM drive no problems
  • Shutdown works, restart doesn't, Unsure about sleep.
  • There is no support currently for the x1250 integrated graphics.
  • PRO:'s Cheap Mobo good features looks amazing and is M-Atx. Overclocks well.
  • CON:'s No integrated Graphics but I am using an ATi 3850 HD Card with full QE/CI so no real loss overall its a great little board!
Yes No audio needs patching and onboard graphics don't allow resolution change or QE/CI due to no graphic kext.
Fatal1ty FP-1N SLI (maybe FP-IN9? there is no "1N")
  • LGA 775
  • NV® NF650i SLI™
  • Install method: Kalyway 10.5.2 to a Primary SATA Partition, partitioned through Diskpart in Vista to AF.
  • Bios: 14 with SLIC table Patch (this shouldn't matter)
  • Audio: Works OOB, with Jack Sensing working well
  • USB: Seems to work well. Logitech USB headset works perfectly OOB
  • LAN: OOB
  • All power functions work OOB
  • RAM: All 4GB working perfectly. Loving my 4Gb Mac
Yes All good
I-45C
  • 945 GC / ICH7
  • GMA950
  • Install method: Kalyway 10.5.2 to a Primary IDE Disk
  • Audio: Works OOB
  • USB: Seems to work well. USB keys/HDD OK. Logitech Webcam OK with macam.
  • IDE : OK
  • SATA : not tested
  • LAN: Works OOB (Marvell kext included in Kalyway 10.5.2)
  • Video : Works OOB
  • Power functions not tested
  • RAM: All 4GB working perfectly.
  • Price : 40 Euros !!! ;-)
Unknown All good
I-45CV
  • 945 GC / ICH7
  • GMA950
  • Install method: Kalyway 10.5.2 on 300GB Maxtor IDE
  • Processor: Intel Dual-Core E2200 2.2GHz
  • Audio: Works OOB
  • USB: Works OOB. Externall USB HD, USB pendrive, CF card reader, Bluetooth pen.
  • IDE : OK. Maxtor 300GB and Philips DVD burner.
  • SATA : Works OOB
  • LAN: Does not work. Not detected. I installed a 6€�realtek 8139 based card. Worked OOB
  • Video : Works OOB (intel GMA950 driver included on Kalyway). Resolutions up to 1280x1024
  • Power functions work Ok but not with Vanilla kernel. Sleep works if selected S1 mode on Bios.
  • RAM: 1x Kingston 2GB DDR2 667 working perfectly.
  • Price : 35€�MotherBoard
Vanilla kernel works, but power functions not ok. (doesn't resstart nor shutdown) LAN doesn't work.

AMD CPU

Hardware Name (alphabetical) Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
Abit AN-M2[1], Sammelthread AN-M2 (german)
  • NF630a
  • NVIDIA® 7050
  • Install Method: Kalyway 10.5.2, Atkos 10.5.2 AMD, Leo4Allv4.1
  • BIOS Version: Abit; Revision: 18
  • BIOS setup options: lan bootrom enable; sata->raid->AHCI
  • Audio: Works out of the box
  • LAN: works with this add 0x054C10DE to IOPCIPrimaryMatch (Info.plist), surfing online surf shop ok so far, issues with filezilla
  • IDE: Full DMA speed with AppleNforceATA.kext and IOATAFamily.kext from Leo4allv4.1 (MCP67)
  • SATA: not fully tested yet (enable AHCI under SATA/RAID)
  • USB: ok
  • VIDEO: Framebuffer only, no accel
  • Shutdown, restart works, sleep not tested
  • Install Instructions:
    1. Partitioned as MBR
    2. Installed using an AMD Kernel, and MBR selections under customize
    3. Complete install and reboot
    4. Use -s on first boot
    5. "mount -uw /" then "passwd" and set a password
    6. Delete or move all graphic driver: "cd /SYSTEM/LIBRARY/EXTENSIONS; rm NV*; rm ATI*"
    7. "touch /var/db/.AppleSetupDone" finally "exit"
    8. Edit /Library/Preferences/SystemConfiguration/com.apple.Boot.plist for your framebuffer screen resolution: <key>Graphics Mode</key><string>1280x1024x32</string>
  • Overall: A Cheap and very energy efficient AMD board (17W idle with Sempron1100/1200/0.8V, 2.5HD, PSU)
EFI ok LAN, IDE needs patching
. . . . . . . .

[edit] Albatron

Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
PX845PEV Pro i845PE Chipset
  • Install Method: Unknown
  • BIOS Version:; Revision: 800 v2
  • Audio: Realtek AC97 ALC 655 Working
  • LAN: Via Rhine III Working
Unknown Yes

[edit] AOpen

Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
I975XA YGD i975
  • Install Method: Kalyway 10.5.1 & Update
  • BIOS Version: Unknown; Revision: Unknown
  • Audio: Works with ALHC888 and Apple HDA Patcher v1.20
  • LAN: Not tested
  • SATA & IDE: IDE works, SATA not tested
  • Wireless: Atheros 300N works well with RT2860 drive
  • -----------------------------------------------------
  • 2nd Install Method: Leopard-10.5.2-AMD-EFI
  • BIOS Version: 1.10a
  • CPU: Intel Core2Duo T7400 2,16Ghz @ 2,4 Ghz - FSB 185Mhz
  • RAM: 4GB (4 x 1GB DDR2 800Mhz)
  • Graphic adapter: ASUS EN8600T Silent 512MB - NVInstallerV.33.pkg works nice!
  • Audio: didn't work with Apple HDA Patcher v1.20 - beta4some861_880Installer.zip worked
  • LAN: works
  • Installation time for 2nd method 90 minutes
EFI works Audio needs patching
i975Xa-YDG Intel 975X
  • Install Method: Kalyway 10.5.2 Intel AMD OSX86
  • BIOS Version: 6PG; Revision: 1.09
  • Audio: Yes
  • LAN: Yes
  • SATA & IDE: Yes
  • Wireless: None
  • CPU: Intel CoreDuo T2400 1,83Ghz @ 2,8 Ghz - FSB 255Mhz
  • RAM: 3GB (DDR2 800Mhz)
  • Graphic adapter: ASUS 3870
  • Audio: Yes
  • LAN: Yes
Kalyway customization: Kernel_9.2.2_modin for USB to work, NATIT_For_X2000_X3000_series for video to work Yes
.

[edit] Asrock

INTEL CPU

Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
ASRock 945GCM-S Intel 945gc & ICH7R
  • Fully working using iAtkos 2.0i, BIOS update not needed (using 1.20); Type "cpus=1" at install. It takes about 5 minutes at boot.
  • Audio, video (Quartz, 1024x768, some mouse tearing) LAN, USB works ok. WLAN using D-Link DWA-520. Dual boot with XP, does not work with Windows 7.
Asrock 4core 1333 eSata2 Intel P31/G31 & ICH7R
  • SATA and PATA and IDE works
  • Onboard Lan works
  • Attached Graphics card works fully
  • onboard USB 2 works
  • Onboard Audio works
  • Onboard Firewire does not work
  • Floppy Dirve does not work in Mac OS.
YES Needed to install a BIOS update to work.

Firewire needs patch

Asrock 4CoreDual SATA VIA Apollo PT880Pro/PT894
  • Install Method: Kalyway 10.5.1 & Kalyway Combo Updater
  • BIOS Version: 1.9; Revision: 1
  • Audio: Works OOB
  • LAN: ViaRhineIl works with Stevo4 Patch
  • SATA & IDE: Both work OOB (may need to append SATA ID 0x73721106 into AppleVIAATA.kext for SATA to work on SATA2 board)
PC-EFI works LAN needs patching
Asrock 4CoreDual-SATA2 Northbridge: VIA® PT880 Pro/PT880 Ultra - Southbridge: VIA® VT8237S
  • Install Method: Kalyway 10.5.1 w/TheStevo4 ppf + Kalyway 10.5.3 ComboUpdate
  • BIOS Version: 1.9 (2.0 doesn't works)
  • BIOS Options: defaults Options
  • Audio: ALC888 in & out stereo working (7.1 not tested)
  • LAN: ViaRhineII work with this kext
  • IDE: Works, SATA: Works with this PKG or if you want to inject the kext into you iso file use this kext and use this method for the english users use google translation
  • Sleep, Shutdown & Restart Works with the 10.5.2 Sleep_kernel
PC-EFI works, NO Vanilla Kernel (VIA Chipset) TheStevo4 Patch, alc888, ViaRhineII and SATA
Asrock Conroe 1333 Intel 945GC & ICH7
  • Install method: Kalyway 10.5.1 or Kalyway 10.5.2
  • Install options: Vanilla Kernel, BOOT_efi_mbr
  • Updated to 10.5.2 using the original Apple combo update using Devin's procedure on insanelymac [2]
  • Updated to 10.5.3 using Kalyway 10.5.3 combo update (had to reinstall discrete nVidia card driver afterward through NVinstaller to get Display Resolution change and QE/CI working again)
  • Updated to 10.5.4 using the original Apple update tool without any problems
  • Leopard Graphics Update v1.0 normal install, works
  • Bios version: P 1.30 (no other firmware later than 1.30 works -tested up to 2.10-)
  • SATA + PATA works
  • Onboard LAN work
  • Audio works with alc_out (2ch out only)
YES Audio needs patching
Asrock Conroe 1333 Intel 945GC & ICH7
  • Install Method: Kalyway 10.5.1 & Update to 10.5.2 following Netkas's guide
  • BIOS Version: P1.30; Revision: 1.0
  • BIOS Options: CPUMAXID set to disbled
  • Audio: ALC888, AFAIK only Azalia 2.1 output
  • LAN: Works OOB
  • SATA & IDE: Both work OOB
PC-EFI v8 & Vanilla Kernel work No, Audio needs patching
Asrock Conroe-1333 D667 Rev. A/G 1.03 Intel 945GC & ICH7
  • Install Method: Kalyway 10.5.2
  • Modified BIOS Version: 1.80; It's nice to have BIOS 1.80 because it supports latest CPUs
  • BIOS Options: Default Options
  • Audio: Works without Patches (Except Input)
  • LAN: Works OOB
  • SATA & IDE: Works OOB
  • You can find the Moded BIOS here[3]
PC-EFI & Vanilla Kernel work Everything Works Without Patching. Credits go to Kabyl (InsanelyMac) He made the moded BIOS.
Asrock Conroe 1333 D667 Intel 945GC & ICH7
  • Install Method: Kalyway 10.5.1 + Devin 10.5.2 Update method
  • BIOS Version: 1.3; Revision: Unknown
  • BIOS Options: HPET "Enabled", Execute bit "disabled", Suspend to ram "Auto"
  • Audio: Need ALC888 patch but no input
  • LAN: Works OOB
  • SATA & IDE: Works OOB
PC-EFI & Vanilla Kernel work Audio needs patch
Asrock ConRoe945G-DVI Intel 945G + ICH7
  • Install Method: Kalyway 10.5.2 SleepKernel EFI8 MBR
  • BIOS Version: v1.90
  • Audio (ALC888): 2Ch Out Works with AppleAzaliaAudio and KEXT-Edit
  • LAN (R8111B): Works
  • SATA & IDE: Works
  • Video (GMA 950): Works
EFI v8 Works Audio Needs patching
Asrock 775V88+ VIA® PT880 chipset
  • Install Method: Kalyway 10.5.2
  • BIOS Version: Unkown
  • BIOS Options: Unkown
  • Audio: Works OOB. But only the left side of the speaker is working.
  • LAN: Needs Via Rhine Driver
  • IDE: Works OOB
Unkown
Asrock P4i65G Intel 865G (North) & ICH5 (South)
  • Install Method: Leo4Allv2 10.5.2
  • BIOS Options: Default options.
  • Audio: Need AC97 patch
  • LAN: Not Tested
  • SATA & IDE: IDE works fine, SATA not tested.
  • Also applied ICHx patch and used legacy APCI
PC-EFI works, no vanilla kernel. Audio needs patch

AMD CPU

Hardware Name (alphabetical) Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
Asrock 939 Dual-VSTA Northbridge: ULi M1695 Southbridge: ULi M1567
  • Install Method: Zephyroth AMD 10.5.2 Rev.1
  • Options: 9.2 kernel
  • Audio: unknown, using usb sound card
  • LAN: Onboard Not Recognized, using realtek card
  • SATA & IDE: use this kext for full speed
  • No PS/2
unknown Onboard audio, lan and ps/2 need patching
Asrock 939Dual-SATA2 Northbridge: ULi M1695 Southbridge: ULi M1567
  • Install Method: Zephyroth AMD 10.5.2 Rev.2
  • Options: 9.2 kernel
  • Audio: ULi M5455
  • LAN: ULi 5263
  • SATA & IDE (SATA only working from II slot)
unknown' Onboard audio, lan (lan works after install until first reboot then breaks) need patching (Works in 10.5.4! See HCL_10.5.4#Asrock and threads for LAN driver and Audio driver)
Asrock ALIVE NF6G-VSTA NForce 4 (MCP61)
  • EFI: Yes
  • Vanilla Kernel: No (AMD CPU)
  • Audio, SATA and Network need patching (IDE is slow without the patch)
Asrock ALiveNF7G-FullHD R3.0 [4], Sammelthread ALiveNF7G-FullHD/Ready/720p (german)
  • NF630a
  • NVIDIA® 7050
  • Install Method: Kalyway 10.5.2, Atkos 10.5.2 AMD, Leo4Allv4.1
  • BIOS Version: Asrock; Revision: 1.10 (5/26/2008)
  • BIOS setup options: -
  • Audio: Works out of the box
  • LAN: works with this add 0x054C10DE to IOPCIPrimaryMatch (Info.plist), surfing ok so far, issues with filezilla
  • IDE: Full DMA speed with AppleNforceATA.kext and IOATAFamily.kext from Leo4allv4.1 (MCP67)
  • SATA: not tested yet
  • USB: ok
  • VIDEO: Framebuffer only, no accel
  • Shutdown, restart works, sleep not tested
  • Install Instructions:
    1. Partitioned as MBR
    2. Installed using an AMD Kernel, and MBR selections under customize
    3. Complete install and reboot
    4. Use -s on first boot
    5. "mount -uw /" then "passwd" and set a password
    6. Delete or move all graphic driver: "cd /SYSTEM/LIBRARY/EXTENSIONS; rm NV*; rm ATI*"
    7. "touch /var/db/.AppleSetupDone" finally "exit"
    8. Edit /Library/Preferences/SystemConfiguration/com.apple.Boot.plist for your framebuffer screen resolution: <key>Graphics Mode</key><string>1280x1024x32</string>
  • Overall: A cheap, stable and energy efficient AMD board (19W idle with AMD 4850e/1200/0.8V, 2.5HD, PSU). Good undervolting-BIOS: 0.8V
EFI ok LAN, IDE needs patching
Asrock ALiveNF7G-HDReady [5], Sammelthread ALiveNF7G-FullHD/Ready/720p (german)
  • nForce 630a (MCP67)
  • NVIDIA® 7050
  • Install Method (advanced): Retail Leopard installed with custom Pre-Boot CD
  • Kernel: Voodoo XNU Kernel 1.0 Rev. A
  • BIOS Version: Asrock; Version: 2.10 (1/7/2008)
  • BIOS setup options: -
  • Audio: Realtek ALC888, Device ID: 0x055c10de / 0x18490888, Legacy AppleHDA for BOOT-132
  • LAN: Realtek RTL8211B, Device ID: 0x054c10de, Driver: nForce LAN driver, working OOTB since 10.5.6
  • IDE: MCP67, Driver: NForceATAController for MCP67
  • SATA: not tested yet
  • Firewire: not tested yet
  • USB: OK
  • Video: Integrated Geforce 7050 with shared memory, no
  • Shutdown, restart and sleep works (I had to change USB/PS2 standby power jumper)
EFI ok IDE, sound, LAN needs patching
Asrock ALiveXFire-eSATA2 Northbridge: ATI CrossFire Xpress 1600 (RD480)

Southbridge: ATI SB600

  • Install Method: Zephyroth AMD 10.5.2 Rev.1
  • BIOS Version: 2.60+; Revision: Unknown
  • BIOS Options: If you want to install on a SATA drive, make sure in the IDE menu, "AHCI" is chosen rather than "Non-Raid" otherwise you may get errors
  • LAN: Works OOB
  • SATA & IDE: Works OOB
unknown Audio may need patching
. . . . . . . . . . .

[edit] Asus

INTEL CPU

Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
Rampage Formula Intel X48 + ICH9R
  • Install Method: Kalyway 10.5.2 with SATA Optical drive
  • BIOS Version: 0403
  • ADI 1988B Audio: works
  • Marvell 88E8056 LAN: both port works
  • ICH9R SATA: all 6 ports working
  • JMicron JMB368 PATA: works (except optical drive)
  • USB: all working
  • Firewire: not yet tested
  • Thi