HCL 10.5.2/Portables

From OSx86
Revision as of 03:37, 17 June 2008 by Skyhighmac (Talk | contribs)

Jump to: navigation, search

Template:10.5.2

This is a hardware compatibility list for 10.5.2 builds. Don't forget to add how you got OSx86 running on your portable x86 computer, and to use proper English. Please see the discussion page for proper instructions on how to input your system specs. Also, please contribute to the HCL 10.5.1 page, which should list a more granular view of compatibility. If your computer isn't listed, you should try it if you have a SSE2 or higher processor. Kernels are available for most configured machines.

See the x86 software page for programs you can run without Rosetta.

Please list your computers in alphabetical order by manufacturer (Asus, Acer, Dell, HP, etc) .

For how to edit the Wiki, please see this thread. Thank you! .

Contents

Asus

A6VM (A6000VM)

  • Chipset: Mobile Intel Alviso i915PM
  • Processor: Intel Pentium M735 1.7 GHz SSE2
  • RAM: 512 Mb (DDR2-533 DDR2 SDRAM)
  • Video: nVidia GeForceGo 7300 (256 Mb)
  • Sound: Realtek ALC880(D)
  • Firewire: Ricoh RL5C552
  • Wi-fi: Intel(R) PRO/Wireless 2200BG
  • Modem: HDAUDIO SoftV92 Data Fax Modem
  • Install Method: Kalyway 10.5.2 ; MD5 = e03af401cc9e0baab1401199170ddf99 ; Installer stops with kernel panic: "AppleSMCPDRC::start - unrecognized device type\n".../ACPI_SMC_PlatformPlugin/AppleSMCPDRC.cpp:68 . .
  • Install Method: Leo4All 10.5.2 ; MD5 = 9D5A50FC18EFEB41636CE42801FD45F3
  • Video: "GO driver" doesn't work, 1024x768 mode is set.
  • Sound: doesn't work, no solution have been tried.
  • Fireware: works
  • Wi-fi: doesn't work, no solution have been tried.
  • Modem: doesn't work, no solution have been tried.
  • USB: works, tested on flash drive and USB mouse.
  • TouchPad: doesn't work .

A9T

  • Install Method: Kalyway 10.5.2 Choose Vanilla Kernel
  • Chipset: SiS M661MX + SiS 964L
  • Processor: Intel Celeron M 390 1.7ghz Working and recognized as 1.7ghz Unknown.
  • Sound: Realtek AC'97 Chip SiS7012 Not working and no solution tried.
  • Ethernet: Not working,no solution tried.
  • Modem: Not working and no solution have been tried.
  • Video: SiS 315 integrated graphics Working.
  • Wi-fi not working and no solution have been tried.
  • Touchpad Working.
  • Card Reader Not tested.
  • Firewire not tested.
  • USB Working.
  • DVD-RW Fully working.
  • Power button Works,Power Gear,Internet Browser and e-Mail buttons not working.
  • "Fn" Keys Shortcuts Working but only the buttons about the Screen.
  • PCMCIA Slot not tested.
  • Don't know if i can see any battery stats. . . .

C90

  • Install Method: Leo4all 10.5.2 (choose vanilla kernel)
  • Processor: Intel E6600
  • GeForce 8600M works with NvInject 2.21 (only shows 256mb)
  • Atheros wi-fi working out of the box
  • Bluetooth works
  • Sound works
  • network seems to be working havent tested

F3SR

  • Install Method: Kalyway 10.5.2 - choose Vanilla kernel
  • Processor: Intel Core 2 Duo (T5450) @ 2.00GHz - (Working with Both Cores - Flashing Bios Required)
  • Ethernet - Works (Attansic L1 Gigabyte Ethernet Driver) [1]
  • ATi HD2400 Mobility 256mb - Works (No Internal Display Only VGA Out)
  • Battery Meter - Works (PowerManagement_137_1.bundle)
  • Sata & IDE - Works
  • Bluetooth Works OOB
  • Intel Wireless 3945/4965 - does not work
  • Audio does not work - (USB Headsets Work)
  • 1.3MP Camera - Does Not Work . . . . .

G2S

  • Install Method: Kalyway 10.5.2 -
  • Processor: Intel Core 2 Duo (T7500) @ 2.20GHz - (Working with Both Cores - Flashing Bios Required)
  • Ethernet - Works (Attansic L1 Gigabyte Ethernet Driver to add after complete install) [2]
  • GeForce 8600M GT - Works (with driver). HDMI output works too
  • Battery Meter - Works (PowerManagement bundle need to be added)
  • Sata & IDE - Works but eSata with JMICRON JBM36X don't
  • Intel Wireless 4965 - does not work. No driver available
  • Audio ALC 882 works
  • 1.3MP Camera - Does Not Work . . . . . . .

R1F Tablet

  • Install Method: Leo4allv3 10.5.2 - choose 9.2.0 (Default or vanilla kernel)

Use Intel ICHx third party drivers Use PowerManagement-Laptop

  • Processor: Intel Core 2 Duo (T5500) @ 1.67Ghz
  • Audio does not work out of box
  • Intel iwi3954 wireless does not work out of box
  • Ethernet works out of box
  • Tablet pen works but needs clibration . .

Z53T

  • Install Method: Zephyroth AMD 10.5.2 rev. 1
  • Processor: AMD TURION 64 X2 TL56 1,8Ghz
  • GeForce GO 7300 fully works with NvInject GO
  • Atheros wi-fi working out of the box
  • SATA works with MeDevil driver . . . .

Z71V

  • Install Method:
    1. Kalyway 10.5.1, then Kalyway Combo 10.5.2 Update, then Netkas Universal 9.2 kernel (10.5.1 seemed to need installing about 3 times before being successful, don't install additional drivers only the EFI mbr boot option).
    2. The Leo4All 10.5.2 install DVD works fine as well.
  • CPU: Intel Pentium M 2.00 GHz (which has SSE2 not SSE3) (Speedstep appears to be working) Also works on Pentium M 1.86.
  • Chipset: Intel 915
  • VGA: NVIDIA GeForce 6600 Go 128MB. CI/QE working, using NVinject. All resolutions supported, fast and no glitches. With Leo4All, it is highly recommended that NVInstaller is used, otherwise CI is software emulation and QE is not working. It also doesn't hurt to install the NVidiaEFI kext.
  • Lan: Marvel/Yukon chip. Using skge.kext. Skge is included with Leo4All.
  • WiFi: Intel 2915ABG drivers not so good, so replaced card with Atheros AR5212 (AR5005G) which works with inbuilt 10.5.2 drivers and supports WPA. The iwi drivers for intel are still immature. Also recommend considering a Dell TrueMobile 1350 wireless mini-pci card.
  • PCMCIA/Cardbus: Install these drivers
  • Sound: Azalia Out. Working. Make sure that you add the device ID to the plist file in the AppleAzalia kext if it isn't in there already. Audio in works with the beta4some861_880Installer.zip on this page, but you can't control the audio out jack (no sound or volume).
  • SATA & IDE: Working
  • Firewire: Detected, I haven't fully tested yet
  • Sleep: Shuts down fine, but sleep won't use S3 only S1 and can't get hibernate to work.
  • iCal requires Rosetta setting. 10.5.2 update produced long boot times but a bit of ammendments mentioned in the forums fixed the boot times to a very quick time. . . . . . If installing from Leo4All,do a system update excluding the security and Time Machine updates and the boot time will drop from 6 mins to <1 min. . . . . . . . . . . . . . . . . .

Acer

Aspire 5050

  • Install Method: Kalyway 10.5.2
  • Processor: AMD Turion 64 Mobile MK36 (2GHz)
  • 1.5 GB 667Mhz DDR2
  • LAN works out of the box
  • ATI Radeon drivers freeze screen. No video drivers on install works, but doesn't play DVD's
  • WIFI doesn't work
  • S/D card Reader does not work
  • Audio works with Azalia
  • PCMCIA doesn't work
  • USB works
  • FN keys for volume works and screen brightness works
  • Front head phone jack doesn't work.
  • Bluetooth doesn't work.
  • powermanagement works! Get battery meter and precentage.

Aspire 5100

Aspire 5920

 Core2Duo 5550 1.83ghz / 3GB DDR / 250GB SATA2 / X3100 Graphics / 15.4" 1280x800
   * Kalyway 10.5.2 (Kernel/kext Fixed, both at 9.2.0 now)
   * X3100 Video Working w/Leopard Graphics Update (CI/QE A-OK)
   * Realtek Audio Working OOB
   * USB Working w/USB Fix 1.2a
   * 3945abg NOT WORKING
   * Broadcom Ethernet NOT WORKING (Linksys USB200M Working w/USB Network Patch)

Aspire 9410Z

   * Install Method: iatkos 10.5.1 w/ EFI. updated to 10.5.2 using combo update and kernel update obtained from TPB. DO NOT DO GRAPHICS 
     UPDATE, it will kill your display.
   * Processor: Intel T2080 1.73GHz both cores work =)
   * Intel High Definition Audio works, no mic, spdif works. Havent tweaked mic may possibly work after tweaks
   * LAN detected, not tested though.
   * Wireless works out of the box.
   * GFX works out of the box, GMA 950
   * Flash Card reader doesn't work no big deal
   * DVD Burning works natively.
   * Bluetooth doesn't work. searching for solution haven't found one yet, Bluetooth dongle works though
   * Webcam works with everything except photo booth
   * No powermanagement (No battery meter, no sleep). I haven't tweaked it yet though, it may be possible. 
   * All and all...Everything that needs to work...WORKS :) play games perfectly with this laptop :) . . . . . . .

Aspire 5920

Video Works with GMAX3100 drivers from wiki Keyboard usaully works Touchpad works Wifi and Lan both dont work ,using belkin wifi g usb dongle Sound works with ALC882 patch from wiki No speakers ,Headphone and line out in work cam works with yahoo chat , but not photo booth ( it shows green meaning I'm sending composite while it's trying to read 3 or 5 part signial)


BenQ

Benq R55

  • Install Method: Kalyway 10.5.2 - no idea which kernel i chose ;-) but it is working
  • Partition Scheme: Master Boot Record - dont know, if it work with GUID as well - i am new to hackintosh
  • Processor: Core Duo T2400 @ 1.83GHz. OSX identifies it correctly
  • VGA: nVidia GeForce Go 7400 with NVIDIA TurboCache (256MB)
  • Sound: Conexant HD Audio. Only speakers working (no headphones or mic), with conexant drivers for leopard on the installation DVD.
  • LAN: Yukon 88E8055 works after manually replacing the AppleYukon2.kext inside the IONetworking.kext. Havent tried with the PCCard.10.5.2.Beta2.pkg (http://forum.insanelymac.com/index.php?showtopic=81036&st=500) A nice guy mailed me a working AppleYukon2.kext and i replaced it only and started DiskUtility-RepairPermissions. So i didnt have to add my LAN hardware id into /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleYukon2.kext/Contents/Info.plist and then install the PCCard pkg! Change this text, if you have experience in it and know it works.
  • Wifi: INTEL 3945abg wireless adapter - not working (YET!)
  • Powermanagement: Battery monitor working with the power management drivers on the installation DVD.

Note: The BIGGEST PROBLEMS so far are AUDIO INPUT as well as MANUAL NETWORK DRIVER INSTALLATION FOR "Marvell Yukon 88E8055" (SUBSYS 0753152D) Thanks guys, keep doing this great job! Regards to all hackintosh users in the world!


Benq S41-C46

  • Install Method: Kalyway 10.5.1 with EFI. both vanilla, no video card drivers selected.
  • Intall the KalywayIntelCombo10.5.2.pkg and kalyway_10.5.2_kernels.mpkg update the system to 10.5.2.
  • Install Restore_Factory_Desktop_settings to restore icons and desktop.
  • Processor: Core 2 Duo T7250 @ 2.00GHz. OSX identify it as 1.99GHz
  • VGA: nVidia 8600m GS. Correct 1280x800 resolution achieved with NVinject.41 installer, QE/CI all supported.
  • Sound: Realtek ALC262. Only speakers working (no headphones or mic), with Azalia in Kalyway OSX 10.5.1 leopard installation DVD.
  • LAN: Yukon 88E8055 work with the PCCard.10.5.2.Beta2.pkg (http://forum.insanelymac.com/index.php?showtopic=81036&st=500)

Add your LAN hardware id into /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleYukon2.kext/Contents/Info.plist and then install the PCCard pkg

  • Wifi: Atheros AR5006x - Not working. You can think about purchase a TP-Link TL-WN322G+ or D-Link DWL-G122 USB WiFi Dongle for the wifi solution.
  • Powermanagement: Battery monitor working with PowerManagement_137_1.bundle, although not until change from battery to plugged-in state.

Note: The biggest problems so far are audio input and output... . . . .

Benq S41-V36

  • Install Method: Kalyway 10.5.2 Vanilla, NVinject 256Mb

Works out of the box, need to install Network (Wired) afterwards, Intel 4965 Wireless Not supported (YET!).

  • Processor: Core 2 Duo T7500 @ 2.20GHz. OSX identifies it perfectly (Both Cores)
  • VGA: nVidia 8600m GS. Correct 1280x800 resolution with NVinject
  • Sound: Realtek HD Only speakers working (no headphones or mic)
  • LAN: Yukon 88E8055 work with the PCCard.10.5.2.Beta2.pkg (http://forum.insanelymac.com/index.php?showtopic=81036&st=500)

Add your LAN hardware id into /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleYukon2.kext/Contents/Info.plist and then install the PCCard pkg

  • Wifi: Intel 4965 A/G/N- Not working. A USB Wifi Could be Used (MAC OS Compatible!)
  • Not Working: Wireless and Card Reader (Texas Instruments)

(For more info see my review at http://www.andrewchapman.net/home-mainmenu-71/1-latest/73-hackintosh.html) .

Clevo

M570RU

This laptop is sold by a lot of manufacturers, most notably Sager (NP5790v). Use CPU-Z or look at the sticker on the bottom, it will have M570RU somewhere.

  • Install Method: Kalyway 10.5.1 (Vanilla Kernel + ACPIFix + Realtek 883 + efi_mbr selected) then Kalyway Combo 10.5.2 Update and Kalyway 10.5.2 Kernel Patch (vanilla), then everything except the graphics updates via Apple Software Update
  • Installed on disk0s3, selected (MBR, third partition on system HD)
  • Dual (Tri?) Boot with XP32 and 64 using either Darwin bootloader or Windows/Chain0, both work
  • Processor: Intel Core2Duo T7700 2.4 GHz (Dual core, SSE3)
  • Memory: 2x2 GB DDR2-667
  • Chipset: Intel 965
  • Audio: Realtek 883, Works OOB (with the 883 driver selected on Kalyway install)
  • LAN: Realtek 8110/8169 Gigabit, Works OOB
  • Video: nVidia GeForce 8800m GTX 512 MB - black screen of death ("you have to restart your computer") when selecting any of Kalyway's graphics drivers or none; workaround: don't install any, then use -x to boot up after OS installation and run NVInstaller, select the correct amount of video memory - fully HW accelerated, QE/CI, no artifacts or glitches
  • SATA & IDE: Intel ICH8 SATA works OOB, no IDE in laptop
  • ExpressCard slot is recognized, no cards to test
  • Battery charge worked in 10.5.1 with replaced kext - not anymore in 10.5.2 - Time Machine works
  • Speedstepping doesn't work - unless the kext is removed, system is very unresponsive
  • Screen Saver/GL acceleration works
  • Sleep works but wakeup only works once, on successive attempts it freezes either when going to sleep or when waking up again
  • Not working
    1. Wlan: Intel 4965 AGN
    2. Camera: D-Max STK-1135 . . . .

Compaq

Presario V3431TU

  • Install Method: Kalyway 10.5.1, Combo Updater, and new Kernel
  • EFI v8 & the Vanilla Kernel work
  • Chipset: Intel 945 Express
  • Processor: Intel Core Duo T2450 2.0GHz (working but with frequent pauses/hangs even when flagged with "cpus=1" at boot)
  • Audio: Works with Azalia kext, only line out
  • LAN: Intel pro 100/VE, Works well but with a downside; kernel panic upon restart when cable is unplugged. solution is to turn off ethernet every restart when you plan to unplug the cable
  • WLAN: Intel 3945 doesn't work
  • Video: GMA950 working with QE & CI, glitches fix with patch, see below
  • Modifications/Patches:
    1. macdotnub's AppleSMBIOS.kext (displays correct info at System Profiler also shows as macbook instead of mac pro)
    2. Battery meter fix from this post
    3. Paulicat's version of Natit.kext found here, updated without trouble to leopard graphics update 1.0 then installed Natit.kext, fully working still with CI & QE, graphical glitches appear to be gone === Presario

C751NR

iATKOS 1.0 v2, MBR file format, Darwin x86 boot loader, Install went as follows: I checked in drivers Intel x3100, Realtech 8139 NIC, SMIbios, SATA support. Nothing else needed. I used Azalia Audio driver from Uphuck 10.4.9 v1.4 R3. After the install I got the results below.

  • Both CPU cores working
  • Intel GMAX3100 fully working with QE/CI showing 144 megs of shared memory
  • DVD Burner working fully with Toast
  • Audio works
  • USB 2.0 fully working
  • Touchpad works
  • Wired NIC works

Not working- Atheros 5007 Wifi mini PCIe (using Afterthemac USB Dongle from ebay) Everything very stable, running Photoshop CS3 extended, iLife '08, iWork'08, MS office'08 with no problems, no overheating.

UPDATE- installed Kalyway 10.5.2 upgrade with great results and stability, it takes longer to boot after the Kalyway updater, but after install all the other updated from Mac (except any Core updates, the time machine/airport update, and security update) everything is fast and working G.M. . . . . .

Dell

Inspiron 6400/E1505

  • Install Method: Kalyway 10.5.1 + Apple 10.5.2 Combo Update (full guide here http://forum.insanelymac.com/index.php?s=&showtopic=15474&view=findpost&p=653838)
  • CPU: Intel Centrino Duo T7200 @ 2GHz working with vanilla kernel (only one core set in com.Apple.Boot.plist with cpus=1)
  • Intel Mobile Chipset: 945GM
  • Graphic card: GMA950 with QE/CI and different resolutions (checked with OpenGL Viewer) - DO NOT INSTALL LEOPARD GRAPHICS UPDATE PACKAGE
  • RAM: 2x1 GB DDR2 PC5300 @ 667 MHz
  • Hard disk: Toshiba MK1234GSX SATA2 120 GB (four primary partitions, HFS+ on second, EFI_MBR installation on it)
  • DVD-RW : Philips SDVD8820 - fully working
  • LAN : Broadcom 440X 10/100 - fully working
  • Firewire : RICOH compliant IEEE 1394 @ 400 MHz - fully working
  • PS2 Keyboard and Touchpad - need patching before upgrading to 10.5.2
  • Sound : Sigmatel 9200 - need patching of original AppleHDA.kext with Taruga's v1.20 & SIGMATEL9200.txt dumpcode (microphone not working, but front buttons do)
  • Mini PCI-e wireless card - Dell Wireless 1500 draft N (NJ449, rev A01) - fully working
  • NOT WORKING PARTS - original Intel 3945 a/b/g wireless card and RICOH 3 in 1 Card Reader . .

Inspiron 1420

  • Install Method: Leo4Allv3 10.5.2
  • Video: Intel X3100 (GM965/GL960 8086,2A02). ( Cant Get This Working For Some Reason )
  • WiFi: Working - (Swapped In) "Dell 1395 WLAN"=Broadcom BCM4310, DevId=4315 - Reboot with -s, go to /Broadcom-Script folder, edit script so it includes dev id 4315. Run script.
  • Sound: Speakers Working, Headphones not working: Intel HDA/Sigmatel STAC9228 - had to install patch (http://wiki.taruga.net/tiki-index.php Get prepatched kext for STAC9228)
  • Using dual cores.
  • Not All Media Buttons Work (Only Volume + - & mute(but mute technicaly does not work))
  • Original Intel 4965AGN Does Not Work Yet
  • Low Battery Life (Without Sleep Kernel) . .

Inspiron 1520

  • Install Method iATKOS v2i 10.5.2
  • Dual boot with XP
  • Basics are working - will report back when fixed sound and video . . .
  • Sound fixed - went round in quite a few circles but IN and OUT working

Inspiron 1525

  • Install Method: Kalyway 10.5.2
  • Video: Intel x3100 (GM965/GL960 8086,2A02). Using IntelGMAX3100 Drivers (From Drivers upgrade) + Natit.kext from http://forum.insanelymac.com/index.php?showtopic=70282&st=240&p=544955&#entry544955. Enabled VNC (system prefs), then on first reboot, when screen goes black, connect from another machine via VNC, and change resolution to 1280x800. Configure spaces to have corner hot-spot for sleep. Then on reboot when the screen goes black, move mouse to the corner to wake it up. Works Great!
  • Webcam: works OOB
  • WiFi: Working - "Dell 1395 WLAN"=Broadcom BCM4310, DevId=4315 - Reboot with -s, go to /Broadcom-Script folder, edit script so it includes dev id 4315. Run script.
  • Sound: Speakers Working, Headphones not working: Intel HDA/Sigmatel STAC9228 - had to install patch (http://wiki.taruga.net/tiki-index.php Get prepatched kext for STAC9228)
  • Using dual cores. . .

Inspiron 1705

  • Install Method Kalway 10.5.2
  • Video Intel GMA 950 with QE/CI 1920x1200 Works OOB
  • Audio Sigmatel - Not working
  • LAN Broadcom 44x Works OOB
  • WLAN Boadcom 43xx Works OOB

Inspiron 1720

  • Install Method: Kalway 10.5.1 + Kalway Combo 10.5.2 Update
  • Hardware: 1.6Ghz Dual Core2; Sigmatel Audio, Nvidia 8600M GT 256Mb (all works when installing NVInstaller v33), Broadcom LAN, SATA drives
  • What is not working after install method: Audio, Mouse tapping, Resolution Change
  • Tip: Leave SATA, Flash Drive, Dual Cores in BIOS active; I had to boot with -v to prevent kernel panics with install DVD

By Rayd8 .

Latitude D600

  • Install Method: Previously installed Kalway 10.5.1 then Kalway Combo 10.5.2 Update (See Kalway 10.5.1 installation method in HCL 10.5.1)
  • Processor: Intel Pentium M 1.6GHz (Single core, SSE2)
  • Audio: Sigmatel 9750, Works OOB
  • LAN: Broadcom 570x, Works OOB
  • Video: ATI 9000 Integrated reports wrong memory, no QE/CI, only one resolution availible
  • SATA & IDE: IDE works OOB (No SATA in laptop)
  • Dell TrueMobile 1300 WLAN works with either patches or kexts for Broadcom (VEN_14E4 & DEV_4320)
  • PCMIA/Cardbus works with either patches or kexts (See below)
  • PCMIA/Cardbus fix for 10.5.2: (Stops working after update)
    1. Install kext from here
    2. Use this utility (Kext Helper) to install kexts here
  • Updated kernel to SpeedStep 9.2 and Netkas new AppleSMBIOS.kext from here and instructions and files from: here
  • Updated graphics, iTunes, etc., directly from Apple's website without any problems
  • Battery charge, Airport, Time Machine, indicators appears in menu bar
  • Speedstepping works
  • Screen Saver works but graphics don't move
  • Sleep works but wakeup doesn't .

Latitude D620

  • YOU MUST SET CPU TO SINGLE CORE IN BIOS. Graphical Corruption and instability results from having dual core enabled.
  • Install Method: Previously install Kalyway 10.5.1, then ran Kalyway Combo 10.5.2 Update. Then updated Kernel to 9.2.0 using Kalyway Kernel Update
  • Processor: Intel Core 2 Duo 1.67 Ghz (Dual core, SS3 - only one core properly works)
  • Audio: Sigmatel 9200 works with AppleHDA patcher & Stac9202.txt
  • Video: Integrated Intel GMA950 fully working with no tweaks needed
  • SATA & IDE both working by default
  • Dell Truemobile 1390 Wireless works by default. Intel Wireless Card currently not working.
  • Battery icon appears and functions correctly with updated PowerBundle.kext

Latitude D630

  • install methied : Kalyway 10.5.1 then ran Kalyway Combo 10.5.2 Update. Then updated Kernel to 9.2.0 using Kalyway Kernel Update
  • Processor : Intel Core 2 Duo 1.8Ghz (Both Cores working properly Bois A06 Defaults, and AHCI
  • 2GB RAM DDR2 667 Correctly identified.
  • Audio: Sigmatel 9200 works with AppleHDA patcher & Stac9202.txt
  • Video: Integrated Intel GMA950 fully working (SLEEP TRICK!) to show internal display.
  • Dell Truemobile 1390 Wireless works by default.
  • Battery icon appears and functions correctly with updated PowerBundle.kext
  • DELL BT appear but dont seem to be able to find any devices to pair with!!!!

Vostro 1400

  • Fully working, sound through speakers
  • Sigmatel STAC 9228 works with patched kexts
  • Video working with Kalyway 10.5.2 Combo Update and Leopard Graphics Update
  • Wireless and webcam working out of the box
  • Internal mic not detected but works through mic jack
  • Keyboard is a bit messy
  • Low battery life

Vostro 1500

  • Install Method: iATKOSir2 + Kalyway 10.5.2 Combo Update + Kalyway 9.2.0 Vanilla Kernel, along with GUID partition & EFI
  • BIOS Version: A04, SpeedStep disabled
  • Processor: Intel Core 2 Duo T5270
  • Audio: Sigmatel 9228 works with AppleHDA patcher & Stac9205.txt
  • LAN: Select Broadcom 440x in iATKOS installer
  • Video: NVIDIA 8400M GS 128MB fully works (including QE/CI) with johnnycarcingen's NVInstaller v.33
  • SATA & IDE: SATA works OOB
  • Dell Trumobile 1490 Wireless works OOB
  • Dell 355 Internal Bluetooth 2.0 + EDR works OOB
  • Card Reader doesn't work

Vostro 1700

  • Install Method: iATKOS 2.0
  • BIOS Version: A06
  • Processor: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz
  • 256MB NVIDIA GeForce 8600M GT (works using iatkos installer nvinject 256)
  • LAN: Select Broadcom 440x in iATKOS installer
  • Sigmatel 9205 sound (works with AppleHDA patcher 1.20 & Stac9205.txt)
  • Internal 2.0 MP camera (works OOB)
  • Intel Pro Wireless 3945 802.11a/b/g (does not work)
  • USB wifi D-link G122 (works using D-link OS 10.4 driver)

XPS M1330

  • Install Method: iAtkos 2.0i
  • CPU: Intel Core 2 Duo T5450 @ 1.65GHz working with vanilla kernel
  • Intel Mobile Chipset: 965M
  • Graphic card: X3100 with QE/CI and different resolutions with Leopard Graphics Update (Sleep is required to turn on internal display)
  • RAM: 2x1 GB DDR2 PC5300 @ 667 MHz
  • Hard disk: Western Digital 160 GB 5400 RPM SATA HD - Dual Boot with XP and EFI
  • DVD-RW : Matoshita DVD-/+RW Slot-loading Drive - fully working
  • LAN : Broadcom 5XXX Gigabit Ethernet - Not working
  • Firewire : RICOH compliant IEEE 1394 @ 400 MHz - fully working
  • PS2 Keyboard and Touchpad - Working, Media buttons need patch
  • Sound : Sigmatel 9288 - After using patch
  • Mini PCI-e wireless card - Dell Wireless 1505 draft N (NJ449, rev A01) - fully working, automatically detected
  • Bluetooth: Working, automatically detected.
  • NOT WORKING PARTS - RICOH 3 in 1 Card Reader . . .

XPS M140

  • Install Method: Kalyway 10.5.1, Virginizer, and then Combo Update
  • Processor: Pentium M Dothan 1.86Ghz
  • Revision: A04
  • Audio: AppleHDA patcher with stac9200-i.txt
  • LAN: Worked OOB in 10.5.1, after update, needed to replace IONetworkingFamily.kext from 10.5.1
  • Video: Onboard Intel GMA900 works, QE isn't supported
  • SATA & IDE: Does SATA work? Any options in BIOS or Patches? Same thing with IDE
  • Wireless: Intel 2200bg works by downloading iwi2200.zip for Leopard. Installed iwi2200.kext along with Networkselector and NSGUI which can be found by searching the forums. Wireless works only on untrusted open networks.
  • No drivers selected during install
  • Partitioned as GUID with no Vanilla Kernel, SSE2 Kernel .

XPS M1710

  • Install Method: Kalyway 10.5.2
  • Processor: Intel Core 2 Duo 7600 2.33GHz
  • BIOS Version: A03
  • Audio: Working
  • LAN: Onboard LAN not working
  • Wireless: Not working
  • Video: GeForce Go 7950 GTX fully working with hardware acceleration
  • SATA: SATA is fully working . . . . . . . .
  • USB: Fully working but must manually start IOUSBMassStorage driver

XPS M1730

  • Install Method: Kalyway 10.5.1 and Combo Updater
  • Processor: Intel Core 2 Duo 7700 2.4GHz
  • BIOS Version: A06
  • Audio: Works with patch
  • LAN: Zydas USB2.0 wlan
  • Video: Dual 8700M with Nvinject, No OpenGL
  • SATA & IDE: SATA is fully working . . . . . . . . .

Precision M60

- Intel Pentium M (1.7GHz) - Nvidia Quadro GFX 700 128Mo - Wifi dell mini pci

  • Kalyway 10.5.2: success with Jas 10.4.8 acpi

- Desactivate all hardware in the bios before installing: wifi, bluetooth, ethernet, smardcard reader, modem

- Install Leopard

- Try progressively to reactivate hardware ... Ethernet still problematic, I cannot activate

  • Sound: Working
  • Ethernet: Not Working (should be desactivated in the bios)
  • Bluetooth: Working
  • Video: Working - Perfect 1900x1200
  • Wireless: Working tutorial . . . . . . . . . . . .

Fujitsu-Siemens

Amilo Pi1536

  • Install method: iAtkos v1.0i with EFI + Kalyway Combo 10.5.2
  • Audio working (with AppleHDAPatcher from http://forum.insanelymac.com/index.php?showtopic=32859 and http://x86osx.com/bbs/data/osxtips/ALC_885_Codec.txt)
  • ATI X1400 OpenGL & Quartz Extreme with mouse stuttering (changed IOPCIMatch key in ATIRadeonX1000.kext/Contents/Info.plist to 0x71451002, but resolution only 1024x768x32bit)
  • LAN working
  • Card Reader working
  • Intel Wireless not working (iwi3945.kext, driver exist but the are crash system, kernel panic )
  • The problem is slow boot because IOKitWaitQuiet (I don't search how resolve to this problem yet).

ESPRIMO Mobile V5505

  • Install method: iAtkos v1.0i with EFI + Kalyway Combo 10.5.2
  • Dual Boot with Vista using Darwin
  • BIOS version A0Z
  • Audio working (headphones not working)
  • LAN working
  • X3100 graphics FULLY working with the driver provided with iAtkos
  • Intel Wireless not working (driver does not exist - replaced with broadcom 4311 (this one was from HP Pavilion dv6000 - working OOB))
  • Card Reader working
  • sleep mode not working
  • Battery indicator now working (see: http://forum.insanelymac.com/index.php?showtopic=80425 for more info)
  • NOTES: Apple GFX Update installed successfully (no noticeable gain or loss in gfx performance).

Lifebook P1620

This is the smallest working Mac Tablet... please post to the InsanelyMac forum thread if you have any ideas of how to iron out a couple more features, especially screen rotation (GMA 945) and touchscreen calibration...

http://forum.insanelymac.com/index.php?showtopic=105883


Gateway

Gateway P-6831FX (Retail Laptop)

  • Install Method: Kalyway 10.5.2 Intel AMD DVD, speedstep kernel
  • Chipset: Intel PM965
  • Processor: Intel Core 2 Duo, T5550, 1.86Ghz - Both cores enabled
  • Audio: Sigmatel HD Audio (unsupported) - Easy solution was a $25 pair of Logitech USB headphones (any Logitech USB headphones will work, newest pair as of June 2008 is a combination of

analog and digital. The phones plug into a USB adapter, the good thing is, regular speakers can be plugged into that adapter as well)

  • LAN: Recognized as Realtek Chipset (actually Intel), works out of the box
  • Video: Using NVinject 512 included with Kalyway 10.5.2 DVD, works at full WXGA+ 1440x900 resolution with QE/CI enabled. External VGA and HDMI included on the laptop, however, plugging

external displays into VGA and hitting the 'Detect Displays' button causes the laptop LCD to go dark and hard boot is necessary to recover (sometimes meaning a boot to single user mode and running a repair on the filesystem). HDMI works correctly.

  • Firewire: Recognized, mounts external drive, Final Cut Studio 2 drives camera and loads video
  • DVD-R/CD-R: Optiarc 8x DL DVD/CD Writer w/ Labelflash - All works as expected
  • Wireless: Intel 4965agn - does not recognize, does not work, probably never will. Purchased Wi-Fire USB Wireless G (based on Zydas chipset). Comes with 10.4/10.5 drivers (www.hfield.com for the product and drivers). Works great, does not use the airport drivers, installs its own management utility.
  • Modem: LiteOn v.92 56k Modem - not recognized, not working
  • Bluetooth: Intel Bluetooth 2.0 - recognized, pairing with certain devices fails
  • PC Card Slot: ExpressCard Type 54 - not recognized, no further testing done
  • (3) USB Ports 2.0 - all recognized, all working
  • VGA Out: not working
  • HDMI Out: working correctly after connecting and 'detect display'
  • 5-1 Memory Card Reader: works and detects card insertion, mounts card and opens picture viewer
  • All in all a very OSX friendly laptop since the 'big hit' devices work either out of the box or with included drivers from Kalyway's DVD. Wireless and sound is a shame, but is easily remediated with common off the shelf USB components since USB 2.0 works as expected. QE/CI is sharp and responsive, movies are great, application compatibility is great and if you didn't know this was a Gateway, the performance and component functionality may fool you into thinking it is a MacBook Pro.


Gateway 3550GZ

  • Install Method: Kalyway 10.5.2 Intel AMD DVD, speedstep kernel
  • Chipset: Intel 855GM
  • Processor: Intel P4-M @ 1.7 Ghz
  • Audio: Recognized as AC97 but does not work(24c58086) Bought USB 2.0 TO 3D AUDIO SOUND CARD ADAPTER VIRTUAL 5.1 on Ebay to enable sound. Works but has some audio artifacts. Also can't control audio volume. Its too loud and need headphones with volume control. Device id is f211 vendor 1130. Tenx is the manufacturer.
  • LAN: Broadcom - Works
  • Video: Only 1024x768 no CI or QE)
  • Firewire: recognized, not tested.
  • DVD-R/CD-R: Recognized, not tested.
  • Wireless: Works with iwi2200 package on install dvd, but have to repair permissions on kext.
  • Modem: (not working)
  • Power Batt indicator (working with PowerManagment Bundle)
  • PC Card Slot (working using Chun-Nan Kext)
  • SD card slot does not work.
  • VGA out works.
  • Before Install go to bios and disable USB legacy or your trackpad and keyboard won't work. You must start up with the AC adapter plugged in. If you boot from the battery it boots slow and you get a spinning wheel. You cannot disable speedstep in the bios. . .

Gateway MT6705

  • Install Method: Kalyway 10.5.2, Leo4Allv3
  • Chipset: Intel 943GML
  • Processor: Intel Pentium Dual-Core T2060 @ 1.6 Ghz
  • Audio: STAC9250 -- works, onboard speakers (2) and headphones output. input does not work (mic jack). Cannot absolutely mute the sound, but almost. Volume control works normally other than that. I use a few kexts generated by Taruga's AppleHDA codec installer.
  • LAN: Yukon Gigabit Adapter 88E8053 -- working
  • Video: GMA950 -- 1280x800, CI and QE. Working on the Apple Video update. VGA-Out works, S-Video is untested, but presumed working. Resolution changing is supported.
  • Firewire: recognized, not tested.
  • Disc Drive: Optiarc DVD RW AD-7530A -- working
  • Wireless: RTL8187 (not used, known not to work), Dynex DX-BNBC (BCM4318) - working
  • Modem: not working, Motorol SM56
  • Power Management working only with the bundle included with Leo4Allv3
   *  SpeedStep works with the Netkas 9.2.0 kernel and speedstep kexts available.
  • PC Card Reader: TI xx12 - working
  • 4-in-1 Card Reader: not working
  • Bluetooth: not working, not attempted due to lack of need
  • SATA: ICH7-M AHCI - working
  • Memory: 1gb 533Mhz DDR2, detected correctly
  • Kernels: vanilla works, netkas kernels works
  • PC_EFIv8, GUID
  • Notes: For best compatibility, Leo4Allv3 is wonderful. Unfortunately, I was not able to use ANY of the drives on this distribution EXCEPT for the ICH7 driver and the GMA950 driver from Apple, which is claimed in the distribution to not allow resolution change, but it works�. All the kexts I use were acquired and created over time between me and various authors among the forums. If you need these drivers, contact "E-werd" on the InsanelyMac forums. Also, I am not sure if this is an issue with the operating system power management for a real issue, but: if I boot on batter, I cannot accept any USB connections that were not connected at boot time. I cannot disconnect those items and reconnect them. I have to boot on AC power to have hotpluggable USB.


Gateway mt6831

  • Install Method: Leo4Allv2
  • Chipset: Intel Santa Rosa
  • Processor: Intel Core Duo 2 T5300 @ 1.73
  • Audio: Sigmatel 9250 (manual install from the AppleHDAPatcher 1.20)
  • LAN: Marvel Yukon 88E8036 (modified appleyukon2.kext with correct id)
  • Video: GMA950 1280 x 800 CI/QE (installed from DVD)
  • SATA & IDE: SATA ICH7 with 160gb Sata Hardrive (installed from DVD)
  • Firewire: (working)
  • DVD-R/CD-R: (working/ burining)
  • Wireless: Dell 1500 (abgn) (working.. had to swap the original Intel Card Out)
  • Modem: (not working)
  • MM/SD/MS Card reader (not working)
  • Power Batt indicator (working with PowerManagment Bundle 137)
  • PC Card Slot (working using Chun-Nan Kext)
    1. Everything mentioned is working except the modem, but I didn't even try. Easiest install ever. Just use the Leo4allv2 DVD.
    2. Selected Vanila kernel 9.2.2, GMA950 drivers, Marvell Yukkon driver.
    3. Install Leopard
    4. Used the AppleHDAPatcher 1.20 to get sound.
    5. Moddified the appleyukkon2.kext for my wired card ID.
    6. Boot with -f
    7. Delete AppleACPIPS2Nub.kext (to get trackpad and keyboard working without -f boot option)

That is it. . . . . . . . .


Gateway m-6816

  • Install Method: Kalyway 10.5.2
  • Chipset: Intel Santa Rosa
  • Processor: Intel Core Duo 2 T5250 @ 1.5
  • Audio: Sigmatel STAC9205 (not working)
  • LAN: Marvel Yukon 88E8036 (dunno yet)
  • Video: Intel x3100 (Working)
  • SATA & IDE: 160gb SATA (installed from DVD)
  • Firewire: (dunno)
  • DVD-R/CD-R: (dunno)
  • Wireless: Intel 3945ABG (not detected)
  • Modem: (not working)
  • MM/SD/MS Card reader (not working)
  • Power Batt indicator (nope)
  • PC Card Slot (dunno)

This is a preliminary listing to determine that yes indeed, the M-6816 is moderately compatible with OSX. I will be updating as I figure out how to make things work.

  • Video worked when I didn't install any drivers from the original install disk. the included GMAX3100 display driver doesn't work. Also DO NOT choose to Mirror the displays. Everything goes FUBAR with that selection.
  • Usual tricks of Codec Dump + HDAPatcher do not seem to work here. . . .

HASSE / LEADER

HASSEE / LEADER W230N

Manufacturer: Hasee / LEADER Model: W230N

Install Methods summary: Kalyway 10.5.2 DVD with Jas 10.5.2 additional packages

Does EFI and/or the Vanilla kernel work? speedstep kernel without EFI

Motherboard Manufacturer: Intel Motherboard Model: GL960 Chipset: GL965 Express

Audio: RTL ALC883 LAN: RL8139 WLAN: RTL8187 SATA & IDE: ICH8M

Processor Dual Core T2330 Speed: 1.6 GHZ 1 GB RAM 120 GB HD

Video Card: Intel X3100

Everything works out fine. Installed Kalyway 10.5.2. with speedstep kernel and ALC883 driver. Added via pacifist Leopard graficdriver update to get full support for X3100 and downloaded WLAN driver directly from Realtec.

Everything works perfect - nice subnotebook for 300 Euro !!!!!


HP

HP DV9700T

System Configuration

  • Intel Core2Duo 2.5Ghz
  • RAM: 3 GB
  • SATA Hard Disks.
  • Nvidia GeForce 8600M GS 512MB (17 inch Display)
  • USB 2.0
  • Intel 4965 B/G/N WiFi
  • Ethernet
  • Intel Hight Definition Audio
  • OSX Version: 10.5.2 Kalyway 10.5.2 Intel/AMD (Vanilla Kernel)

Working out-of-the-box

  • Nvidia GeForce 8600M GS (Not Full Resolution / No Dual Monitor Support - See Action Required to get these working)
  • USB 2.0 (Some issues with NTFS-3G)
  • Internal HP Webcam (REALLY NO DRIVER REQUIRED - Must have graphics card working with QE/CI for some features)
  • Internal 4 pin FireWire
  • HP Media Remote (minimal directional and volume control)

Working, user action required

Nvidia GeForce 8600M GS 512
Display requires driver installation and modification of info.plist to work at full resolution and with VGA-out. Mirror function still doesn't work properly, but forces main display to VGA-out.

  • Install Universal NVidia Driver (http://zack.phatoproductions.com/downloads/mac/NVidia-Universal-Installer.mpkg.rar)
  • Right Click /System/Library/Extensions/NVInject.kext choose "Show Package Contents"
  • Copy Info.plist to ~/Desktop
  • Open Info.plist copy with Plist Editor
  • Replace NVCAP string with 04000000 00000100 02000000 00000007 00000000
  • Save copy of info.plist and copy back to NVInject.kext contents
  • Change permissions of NVInject:
    "sudo chown -R root:wheel /System/Library/Extensions/NVinject.kext"
    "sudo chmod -R 755 /System/Library/Extensions/NVinject.kext"
  • Run Disk Utility and repair permissions on disk.
  • Delete Extension Caches and Kernel Caches before rebooting
    "sudo rm -R /System/Library/Extensions.mkext /System/Library/Extensions/Caches/"
  • Reboot with -f just in case.

Intel High Definition Audio
Audio requires driver ALC 268 - http://forum.insanelymac.com/index.php?act=attach&type=post&id=26978

Still Not Working

Intel 4965 B/G/N WiFi 2008.05.23 - A driver is in alpha development but currently causes kernel panics and doesn't work.2008.05.23

Bugs

  • Vanilla Kernel Hangs on Sleep

Not tested

  • Output to S-Video
  • Card Reader (SD/MS/MMC/XD)
  • Internal Modem
  • HP Expansion Port
  • PCIe Port

Resources

HP 9700T

Manufacturer: HP Model: 9700T

Install Methods summary: Kalyway 10.5.2 DVD

Does EFI and/or the Vanilla kernel work? Vanilla Kernel installed w/EFI

Motherboard Manufacturer: Motherboard Model: Chipset: BIOS Version: F51

Audio: Onboard Works OOB. LAN: Onboard Works OOB. SATA & IDE: Two Drives. One Formated to HFS+ Mac Extended Journaled. Sees NTFS drives as well but you can only install to HFS.

Processor Core2Duo 2.5 GHZ

Speed: 2.5 GHZ Recognized as what in System Profiler:

Video Card: NVIDIA 8600M GS Worked with NO Video card option at install, then downloaded NVINSTALLER .31 http://scottdangel.com/blog/?p=18 Full 1650X1050 resolution


Wireless/Wired Card - NO WIFI YET. Interface: PCI/PCI-e? PCI internal INTEL 4965 BGN


Sound Card: Sounds works OOB including touch volume and mute above keyboard

Other Accessories (USB/FIREWIRE) USB PORTS WORK. INCLUDING HP QUICKDOCK port replicator.

NO WEBCAM YET. . .

Pavilion dv2000t CTO

  • Install Method: iAtkos 2.0i DVD
  • Chipset: (Intel 945PM)
  • Processor: Intel Core 2 Duo T7200 2.00 Ghz
  • Audio: Conexant HD Audio -- worked OOB
  • LAN: Intel LAN -- works with included driver selected during install; Wireless - Intel 3945ABG -- doesn't work; Bluetooth -- works OOB
  • Video: Nvidia GeForceGo 7200 -- Works using NvInject Go 0.2.0
  • SATA & IDE: Both work OOB
  • Other: Built-in webcam works OOB; Intel Wi-Fi and card slots don't work; Intel Speedstep works with application installed during setup. I purchased a Ralink USB Wi-Fi adapter which works for wireless
  • How to install: Booted to iAtkos DVD and installed using default Kernel. Selected Intel V100 LAN driver, Nvidia driver, and speedstep software during custom install. Works perfectly.


Pavilion DV6506TX

  • Install Method: Unknown
  • Chipset: (Northbridge & Southbridge)
  • Processor: Intel Core 2 Duo T7300
  • BIOS Version: Unknown; Revision: F22
  • Audio: Works with Tagura Patch driver From Taruga ALC268_Installer2.zip
  • LAN: Works OOB
  • Video: NVIDIA GeForce 8400M GS 128MB works with 10.5.2_NVkexts.pkg
  • SATA & IDE: SATA works OOB . .

HP Compaq nx7010

  • Install Method: Kalyway 10.5.2
  • LAN: wifi (Intel 2100-B3) doesn't work, but bluetooth does. It recognais Ethernet, Modem and FireWire
  • Video: ATI Mobility Radeon 9200 64MBs, seems to have some little glitches on rendering (not smoothly) . . . . . . . . . . . . . . .

HP Tx1000

  • OS Leo4Allv2 (V3 not yet tested)
  • Wireless worked out of the box
  • sound doesn't work needs sound kext for Realtek found at the link in the bottom
  • Lan works with kext at the bottom
  • During installation "go to customize and choose

AMD-System-Fix Time-Machine-Fix Third Party Drivers

Chipset Drivers nForce2/3/4/5 driver

Graphics Drivers nvInject Go

Network Drivers ForceDepth Driver" as stated from "hackthatifone's" post in the youtube video "HP tx2000Z OS X86 Leopard 10.5.2 First MAC TABLET !"

Thanks to the Leo4All creators and "the_29" for the kexts.

  • Note: must be subscribed in the forum in order to see and download kexts .

HP Pavilion tx2000z

  • OS Leo4Allv2
  • Downgrade your BIOS to F.04 (ftp://ftp.hp.com/pub/softpaq/sp38001-38500/sp38256.exe), this is necessary for your sound to work and must be done from within windows.
  • Press F9 during boot and select to boot from CD (you must do this or you will get the com.apple.boot.plist error)
  • The disk will stop booting at IOAPIC: Version 0x11 Vectors 0:23
  • Double-Tap your Power Button and it will continue loading
  • Format your Partition or Disk using the Disk Utility during setup
  • Click the Customize button before installing & select the following options
 *AMD-System-Fix
 *TimeMachineFix
 *Third Party Drivers
    *Chipset Drivers
         *nForce 2/3/4/5 chipset driver
 *Audio Drivers
 *AzaliaAudio
 *Graphics Drivers
    *NVidia Driver
         *NVinject Go
 *Network Drivers
 *Forcedeth driver
  • Let the disk install once it's finished you should have a more or less working install of Leopard
 *Remember to press F9 and choose your Hard Drive to avoid the com.apple.boot.plist error
 *And also remember to Double-Tap your power button to get it to boot
  • Now download the_29's tx1000 package (http://rapidshare.com/files/109974152/tx1000Pack.zip) and install per the instructions, in a nutshell all of the .kext files need to be installed with the Kext Helper in the Applications folder, and all of the other files have their places as well, just read the instructions and you should be good to go

This should get you to a mostly working tx2000z Leopard Tablet, things that do not work are as follows:

  • Webcam (Blue Light comes on, but picture is always green
  • Sound Jacks on front port (No mic, or sound out of jacks 1&2)
  • ACPI Power issue on boot (Double-Tap the power button)
  • ACPI Power issue, cannot boot under battery power (must be plugged in)
  • Screen Calibration does not currently work
  • All kexts and information can be found in the topic below, please check that post for the most recent information regarding the tx2000.

"http://forum.insanelymac.com/index.php?showtopic=87077" .

IBM/Lenovo

T40

  • Install Method: Kalyway 10.5.1 (SSE2 + efi_mbr only) then Kalyway Combo 10.5.2 Update and Kalyway 10.5.2 Kernel Patch (modbin), then Graphics Update from Apple Software Update
  • System Model: 2379-D5U
  • Processor: Intel Pentium M 1.6 GHz
  • Audio: Works OOB
  • LAN: Works OOB
  • Video: Works OOB at 1024x768, modified boot.plist to increase resolution to 1400x1050 (ATI Mobility Radeon 9000)
  • IDE: Works OOB
  • Wireless LAN: Atheros AR5001X did not work despite a variety of various attempts to get support for that chipset
  • Bluetooth: Seems to be working OOB
  • Power Management: Battery monitor worked with PowerManagement.bundle installed .

T42p

  • Install Method: Kalyway 10.5.2 (SSE2)
  • System Model: 2373-HVU
  • Chipset: Unknown
  • Processor: Intel Pentium M 1.8 GHz
  • Audio: Works OOB
  • LAN: Works OOB
  • Video: ATI Radeon 9600 Chipset (ATIRadeon9700 driver blows and has tearing. Backup/erase ATIRadeon9700* and use the VESA - benchmarks the same, no tearing.) Supports 1600x1200x32, no QE/CI no mode switching, no dual display, no video sleep support. Slow.
  • IDE: Works OOB
  • Kalyway CD does not install proper System.kext for the SSE2 kernel. You need to track down one that matches 9.2.0 or USB hotplug support will not work.
  • Working system will hang at boot for 4-5 minutes due to CardBus issue. Install the PCCard.10.5.2.Beta2.pkg to fix this delay and enable PCMCIA/CardBus.
  • WiFi: Atheros - just add 1014 to the Info.plist in AirPortAtheros.kext.
  • Power Management: Install Power Management Bundle . . .

T43p

  • Install Method: Kalyway 10.5.2 ; MD5 = e03af401cc9e0baab1401199170ddf99
  • System Model: 2668-G7U
  • Chipset: Unknown
  • Processor: Intel Pentium M 2.1 GHz
  • Video: ATI Mobility Radeon X600
  • Installer stops with kernel panic: "AppleSMCPDRC::start - unrecognized device type\n".../ACPI_SMC_PlatformPlugin/AppleSMCPDRC.cpp:68 .

T43p

  • Install Method: Leo4Allv3 ; MD5 = 48b3bea091a9247238b6534098e102f9
  • System Model: 2668-G7U
  • Chipset: Unknown
  • Processor: Intel Pentium M 2.1 GHz
  • Video: ATI Mobility Radeon X600
  • Installer seems to work perfectly, on reboot system waits forever with message: "Still waiting for root device."

X41 Tablet

  • Install Method: Kalyway 10.5.1, Kalyway Combo 10.5.2 Update, ToH 9.2.0 kernel
    1. Use the paperclip trick on the VGA port or connect to an external monitor
    2. At the DVD boot prompt: -cpus=1 -v, or the install will hang indefinitely at either the Languages or Welcome screen.
  • System Model: 1866-9MU
  • Processor: Intel Pentium M 1.6 GHz
  • Audio: Works OOB
  • LAN: Works OOB
  • WiFi: Works with Artheros card
  • PowerManagement: Works with PowerManagement.bundle
  • Video: Works OOB with QE/OpenGL
  • Tablet works with TabletMagic

Doesn't Work:

The X41's 1.6GHz Centrino CPU only supports SSE2 instructions, and as such Rosetta apps don't always function properly. PPC binaries such as Manga Studio Debut 3.0 (the main reason I wanted to run OSX on this tablet) crash frequently and in unpredictable ways. When you shut the laptop lid it futzes the screen. The desktop is still visible, but with much distortion and many artifacts. This can be corrected by manually switching the resolution and then switching it back to your default settings.

R61i

  • Install Method: iAtkos 10.5.2, GUID, Options: MacBook SMBIOS, Remove Thermal kexts, Intel GMAx3100
  • Wireless: ThinkPad A/B/G: Works with adding <string>168c,1014</string> to Atheros Info.plist
  • Video: Works 100% with QE, external monitor support. Works perfectly
  • Audio (AD1984) does not work yet
  • SATA Works Fine
  • Sleep: Works with a Natit.kext and AppleIntelGMAX3100FB.kext made by user-> simcolor
  • LAN works OoB
  • Running Vanilla kernel 9.2.2

T60 1952-CTO

  • Install method: Kalyway 10.5.2, MBR, options: speedstepkernel, Intel GMA950 drivers (Tiger), Powermanagement Bundle, AzaliaAudio, and some patches
  • Audio works (only output)
  • LAN and GMA950 works OTB (without artefacts)
  • Wireless not working; switched to Atheros 5008 802.11abgn adapter (working out of box)
  • SATA working
  • sleep does not work (0192 bios error - security hardware tampered - even with vanilla kernel)
  • display brightness keys with old AppleIntelIntegratedFramebuffer.kext
  • fingerprint reader works with UPEK USB drivers
  • switching from external to internal LCD not working
  • DVI over advanced mini-dock not working .

T60P

  • Install Method: Original DVD patched with EFI v8, Partitioned as GPT, EFI v8 + Vanilla Kernel work
  • Motherboard Model: 1952ER5
  • Processor: Intel Core 2 Duo 1.83GHz
  • Audio: Patched with AppleAzaliaAudio from JaS 10.4.9 DVD
  • LAN: Works OOB
  • Video: Intel GMA950, fully works
  • SATA & IDE: Work OOB
  • Any other details, specific install requirements, etc.

T60P

  • Install Method: iATKOS 10.5.1 DVD + official Apple 10.5.2 update (combo + graphics), EFI v8, MBR (GPT also works), Vanilla 10.5.2 kernel
  • Motherboard Model: 2007-83U
  • Processor: Intel Core Duo 2.17GHz
  • Audio: works (output, mic not tested); need to add AppleAzaliaAudio.kext and AppleAC97.kext
  • LAN: Ethernet works OOB, Intel 3945 doest not work, IBM 802.11 a/b/g works OOB (seen as plain Airport card)
  • Video: FireGL 5200 256/512 Hypermemory: fully works (CI/QE) with standard ATIRadeonX1000.kext; need to add 0x71C41002 in IOPCIMatch in Info.plist
  • SATA: works OOB
  • Need ATIinject or gfxstrings to add LVDS, EDID to get resolution switching and hardware cursor (fixes mouse tearing)
  • Need ACPIPS2Nub and ApplePS2Controller (as found in iAKTOS)
  • Installed AppleSMBIOS from EFI v8 and dsmos,kext
  • Note: system enters sleep but crashes/hangs at resume with 0192 "HW tamper" error (still investigating)

X60

  • Install Method: leopard flat image + kalyway 10.5.2 update
  • Motherboard Model: 6363
  • Processor: Intel Core 2 Duo 1.5 GHz L7400
  • Audio: mic does not work
  • LAN: Ethernet works OOB however, System Preferences always shows cable as unattached. DHCP does not work by default, but if you set a static IP, then switch to DHCP, it will work.
  • Wireless: You MUST replace the Intel card with an IBM/Atheros one. Having done so:

sudo nano System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AirPortAtheros.kext/Contents/Info.plist Add: <string>pci168c,1014</string> Fix ownership and permissions per the guide above.

  • Video: You will get a blue screen w/o login upon initial install. To fix this, you will need to edit the following files:

AppleIntelGMA950.kext/Contents/Info.plist

Look for the following strings:

<key>IOPCIPrimaryMatch</key> <string>0x25828086 0x25928086 0x27728086 0x27A28086</string>

Replace this with:

<key>IOPCIMatch</key> <string>0x00008086&0x0000ffff</string>

Do the same replacement in AppleIntelIntegratedFramebuffer.kext

Then reboot, then GMA950 should work but with mouse tearing problem. Works with any resolution.

  • SATA: works OOB
  • Note: system can not go to sleep state. . . . . . . . .

X60 1706-CE5

  • Install Method: iATKOS 1.0i(vanilla kernel) + kalyway 10.5.2 update
  • Processor: Intel Core 2 Duo 1.66 GHz L5500
  • Audio: Works OOB (volume controlled from keyboard)
  • LAN: Ethernet works OOB
  • WAN: Thinkpad 11a/b/g works with modified IO80211Family.kext
  • Video: GMA950 works with mouse tearing problem. Works with any resolution and secondary output, no screen if installed Graphic Update 1.0
  • SATA: works OOB
  • For sleep and screensaver, need patched PowerManagement from here and AppleACPIPlatform from here (uphuck forum) . . . . .

X60 Tablet

  • Install Method: Leo4All3
  • Processor: Intel Core 2 Duo 1.5 GHz L7400
  • Audio: Works OOB (with azallia kexts)
  • LAN: Ethernet works OOB
  • WAN: Thinkpad 11a/b/g works with modified IO80211Family.kext
  • Video: GMA950 works in software mode.

After Paulicat's GMA950 Nanit install, video fully working, even with external monitor. NO tearing. Problems only with resolution lower then 1024x768.

  • SATA: works OOB


X61 (non-tablet)

  • Install Method: Kalyway 10.5.1 + kalyway 10.5.2 update
  • Processor: Intel Centrino Pro 2GHz
  • Audio: Does not work :-(, using USB adapter for headphones
  • LAN: Does not work, using USB adapter
  • WAN: Intel card does not work, replace with Lenovo atheros card or use USB adapter
  • Video: Fully working
  • SATA: Works great
  • Power Management: battery meter works with patch, sleep works, no SpeedStep so far
  • On the first boot after install this computer locks up, the problem is the IntelGMA kexts. To fix it boot into safe mode using -x. Install the Apple Graphics Update(you'll need a usb network device), remove /System/Library/Extensions/AppleIntelGMA950*, and AppleIntelIntegratedFramebuffer. We wont be needing those as we have the X3100 video. Find and install the Natit kext which helps with video. . . . . . .


X61 Tablet

  • Install Method: Kalyway 10.5.2
  • Processor: Intel Core 2 Duo 1.6 Ghz ULV
  • Audio: SoundMax AD1984: Does not work
  • LAN: Intel 82566 MM Gigabit Ethernet Controller: Does not work
  • WAN: Thinkpad 11 a/b/g card: which is really an Atheros card vendor/device id 168c, 1014. The AirPortAtheros.kext file has to be edited to include the device id of your atheros card. In my install i didn't have this file in the IO80211Family.kext file, turns out it was in a folder called IO80211Family.kext.orig which is found in /System/Library/Extensions. Make a backup of the IO80211Family.kext file then copy the IO80211Family.kext.orig folder to your desktop and go to Contents/Plugins inside it. Right click on the AirPortAtheros.kext file & select show package contents then go to /Contents/ and open the info.plist file look for the entry IONameMatch and add the following line to the array: <string>pci168c,1014</string> Save the file. Then rename the folder to IO80211Family.kext, then copy it back into the Extensions folder replacing the copy there, use Disk Utility to repair permissions and restart the computer.
  • Video: Intel GMA x3100: Fully working in 1400x1050 resolution.
  • SATA: Works great
  • Power Management: no battery meter, sleep works, no clue about SpeedStep
  • Digitizer: Wacom (Pen Only): Works with TabletMagic Instructions found here:[3] .

Nexoc

Osiris E618

  • Install Method: Kalyway 10.5.2
  • Chipset: Intel PM965 + ICH8-M
  • Processor: Intel Core2Duo T7500 2,2GHz
  • Audio: Realtek HD Audio OoB: Speaker work, Mikrofone-In, Audio-Out, Optical-Out, Subwoofer don't work. No patches applied
  • LAN: LAN works OoB, WLAN: Intel3945 won't work, no Patch aviable
  • Video: nVidia GeForce8600M GS Works with patch, see Component List. . . . . . . . . . . . . .

Olivetti

Olibook 610-430 (ECS/Uniwill Barebone)

  • Install Method: Kalyway 10.5.1 + Kalyway Combo Update (PC EFI + Vanilla Kernel)
  • Processor: Intel Celeron M 430 (1.73ghz) Core Solo Yonah
  • Chipset: Intel 945GM1940GML
  • Video: Intel GMA 945 - Works with QE/CI enabled, can change resolutions for the internal and external monitor. Minor mouse tearing / artifacts in Firefox 3 and MS Office. Quake 3 works great. S-Video TV Out doesn't work, stays at blue screen when booting.
  • Audio: Realtek ALC883 - Works with headphones or external speakers, mic-in not tested. There's a way to enable internal speakers with a patch but then line-out doesn't work. SPDIF Not tested.
  • LAN: Realtek 8139 - Works OK.
  • Wi-Fi: Intel PRO/Wireless 3945ABG - NOT WORKING
  • Touch pad: Works OK.
  • USB ports: All working. Tested with Logitech MX518, A4Tech Spanish Keyboard (all keys detected) and Sony Ericsson Z550a.
  • Power Management: Sleep works OK, but sometimes I get choppy sound afterwards. Battery meter missing (worked OK in iatkos 10.5.1).
  • SATA: Works OK.

Samsung

Samsung X11 cv02

  • Install Method: Kalyway 10.5.1 & Combo Update (PCEfi v8 and vanilla kernel with ACPI fix)
  • Chipset: Intel 945GM/ICH7M
  • Processor: Intel CoreDuo T2400 1,83Ghz
  • GeForce GO 7400 fully works with NvInject GO
  • Audio AD1986A fully works with ad1986 installer
  • WiFi Intel doesn't work. I've changed it (Broadcom for 10$)
  • Ethernet works
  • Bluetooth works
  • Sata and IDE work
  • USB works
  • Firewire works
  • Cardreader doesn't work
  • Battery indicator and ACPI options work with Howto from here . . . . . . . . . . . . . . . . . . . . . . . .


Sony

Sony Vaio PCG-V505EX

  • Install Method: Kalyway 10.5.2 dvd (downloaded from isount - filename Kalyway_10.5.2_DVD_Intel_Amd.torrent)
  • Processor:Intel Pentium M (Centrino) 1.5Ghz
  • Video: Works without selecting additional graphics drivers during install
  • Audio: Yamaha, works perfectly out of the box
  • Wifi: 2200b/g works after install of iwidarwin kext
  • Ethernet: works
  • SATA/IDE: works
  • Keyboard: works
  • Trackpad: not working (yet)
  • Battery indicator: works . .
  • Install options selected on DVD for successful installation: All default configuration options except must install with JaS_SSE2... patch. If you can't reboot after install, try the following: "f8" on reboot, type"-s", at root type "mount -uw /", then type "/movevideodrivers"... then "yes" to all drivers, then "exit" to reboot. You may have to reboot once or twice before it finally loads up. After that it is stable.

Sony Vaio VGN-NR120E

  • Install Method: Kalyway 10.5.2 dvd
  • Chipset:Intel 965GM/ICH8M
  • Processor: Intel CoreDuo T2310 1.46Ghz
  • Video: Works in 1280x800 resolution using SwitchResX. No backlight adjust though.
  • Audio: ALC 262, work perfectly, installed Taruga Patcher 1.2
  • Wifi: no
  • Ethernet: works
  • SATA/IDE: works
  • Keyboard: Fn volume keys work, brightness doesn't. Home/End keys doesn't.
  • Battery indicator: works . .

Sony Vaio VGN-FZ21Z

  • Install Method: iATKOS 1.0ir2 & Kalyway Combo Updater
  • Chipset: Intel 965PM Express
  • Processor: Intel Core 2 Duo T7500
  • Audio: Sigmatel 7662, works with AppleHDAPatcherv1.20 & sigmatel_7662.txt
  • LAN: Yukon 88E8036, works after updating AppleYukon2.kext/Contents/Info.plist for Yukon 88E8036 card [Vendor: 11ab Device: 4351]
  • Video: NVIDIA GeForce 8600M GS, doesn't work. Internal and VGA out are black screens no matter what NVinject settings used.
  • SATA & IDE: Work OOB
  • Install Options: EFI bootloader, Stock Kernel & ACPIPlatform
  • For Update to 10.5.2: Be sure to take a backup of your /System/Library/Extensions directory, as the 10.5.2 AppleACPIPlatform.kext stopped my keyboard and pointer working (even in single user mode). fixed by booting -s from install DVD and reverting to backed up 10.5.1 kext.
  • Laptop runs hot. Fan speeds appear to be changed in response to cpu load. No idea if speedstepping is active.
  • 'About this Mac': crashed every time it was loaded. problem fixed with AppleSMBIOS fix (found on insanelymac)

Sony Vaio VGN-NR260E/W

  • Install Method: iATKOS v 1.0i r2 & Kalyway Combo Update, 9.2 kernel by Kalyway
     Ubuntu LiveCD cfdisk type = af partition format
     PC_EFI v8, GUID bootloader, NO VIDEO KEXTS (wait to use those from Graphics Update), vanilla kernel with ACPI, boot_v8 added to grub
  • Chipset:Intel 965GM/ICH8M
  • Processor: Intel CoreDuo T2330 1.60Ghz
  • Video: GMAX3100 works, full QE/CI (with Graphics Update+paulicat's Natit.kext+Switchresx, install all THEN reboot, else screen is rubbish)
  • Audio: ALC 262, speaker works, headphones don't
  • Wifi: Atheros AR5007EG, is recognized as 5006, doesn't work; using D-Link WUA-1340 USB dongle with driver from http://www.dlink.com/products/support.asp?pid=477&sec=1#drivers (yes, it's for Tiger, but it works just fine under Leopard)
  • Ethernet: untested
  • SATA/IDE: works
  • Keyboard: Fn keys work, Home/End keys don't
  • Battery indicator doesn't work .


Sony Vaio VGN-C1S/W

  • Install Method: Kalyway 10.5.1 dvd + Kalyway Combo Update to 10.5.2
     Install Vista, boot leopard dvd, format new partition and set to active. install with nothing selected but vanilla
  • Chipset:Intel 950
  • Processor: Intel CoreDuo T5500 1.60Ghz
  • Video: GMA950 full QE/CI (worked without any modifications with corect resolution adn external monitor support (including all the resolutions). No backlight adjust though.
  • Audio: ALC 262, work perfectly, installed Taruga Patcher 1.2
  • Wifi: Replaced original Intel 3945ABG with Dell one (Broadcome 4311) which comes up as native airport
  • Ethernet: works
  • SATA/IDE: works
  • Keyboard: Fn volume keys work, brightness doesn't.
  • Battery indicator: doesn't work .System will hang on boot logo if turned on without mains plugged in, and kernel panics if mains is taken out while running. About this mac works perfectly . .


Sony Vaio VGN-FE45

  • Install Method: Kalyway 10.5.1 dvd + Kalyway Combo Update to 10.5.2
  • Chipset:Intel 965GM/ICH8M
  • Processor: Intel CoreDuo T5600 1.83Ghz
  • Video: Nvidia 7600go works(Internal display works only without QE/CI), full QE/CI, All resolutions on external monitor( Using NVinject 2.1)
  • Audio: Sigmatel 7662, works with AppleHDAPatcherv1.20 & sigmatel_7662.txt using fedora 8
  • Wifi: Intel 3945 not working, using USB Linksys 54G Adaptor
  • Ethernet: works
  • Bluetooth: works
  • SATA/IDE: works
  • Keyboard: Onboard volume keys work and Normal keyborad fuctions
  • Battery indicator: Work with patched powermanagment.bundle. Systems restart,shutdown works normal. . . . . . .

Toshiba

Portege M200

  • Install Method: Kalyway 10.5.2 DVD
  • Chipset: Intel
  • Processor: Intel 1.6Ghz
  • Audio: Model, AC97 - unknown model, works with no patches
  • LAN: Model, Ethernet: onbored works with no patches, WIFI: swaped intel 2100 for a broadcom card works with broadcom patch on install dvd
  • Video: NVIDIA 5200go - cant change resolution, non QE/CI - runs at 1024x768
  • Any other details: usb devices recognised but dont function, must delete cashes - see this post http://forum.insanelymac.com/index.php?showtopic=98972&hl=usb+wont+work
  • How to install: This laptop doesnt have a cd drive, i used another pc to install it, during install select the sse2 patch. nothing else special needed .

Portege M400

  • Install Method: Kalyway 10.5.2 DVD
  • Chipset: Mobile Intel 945GM Express
  • Processor: Intel Core 2 Duo T7200 (2x2.0GHz)
  • Audio: SigmaTel High Definition Audio - didn't get it to work, but haven't tested that much
  • Video: Intel GMA 945 ?? 950 ?? - couldn't get neither CI/QE nor full native resolution (1400x1050) to work, but haven't tested that much
  • LAN: Intel PRO/1000 PL - works out of the box
  • WiFi: Intel 3945 - doesn't work
  • Firewire: not tested yet
  • Bluetooth: not tested yet
  • USB boot: not successful yet
  • How to install:
    • I had to manually DISABLE 'Core MultiProcessing' on the BIOS - to avoid kernel panic while booting from the install DVD. No need for boot switches. The installer recognizes and handles the M400 RAID Controller with no problems whatsoever.
    • To get to the BIOS, turn your tablet on, press and hold ESC until you hear a loud beep, then press F1.
    • To boot from a selected device (CD/DVD, USB...), turn your tablet on, press and hold F2. Then use the arrow keys to highlight the desired boot device and press ENTER (return key). .

Satellite P105-S9722

Install method: Used Kalyway 10.5.1 DVD followed by the Kalyway 10.5.2 combo update ; MBR EFI Motherboard: north - Intel i945PM rev.03 ; south - Intel 82801GHM (ICH7-MU) rev. B0 BIOS: BIOS Vendor TOSHIBA ; BIOS Version V4.20; BIOS Date 11/02/20072

one pretty useful link /I guess/ for coders: http://www.notebook-help.ru/test/everest/Toshiba_Satellite_P105-s9722/Toshiba%20Satellite%20P105-s9722.htm . . .

Satellite U205-S5002

AKA: HackinToshiba

  • Processor: Intel Core Duo 1.66Ghz T2300E (WORKING - cpus=1)
  • RAM: 4GB Corsair PC5300 667 RAM (WORKING - Darwin - 3.3GB; Leopard - 4GB - APPLESMBIOS 667 - LEO4ALLv3)
  • HDD: 100GB Western Digital SATA HDD 5400RPM (WORKING - Leopard 10.5.2 - 9.2.2 Vanilla Kernal - LEO4ALLv3)
  • DVD: MatshitaDVD-RAM UJ-842S (WORKING - Burning DVDs & CDs w Disco - OUT OF BOX)
  • AUDIO: AD1981HD Audio (WORKING (OUT) - AppleAzalia + AC97 - LEO4ALLv3)
  • VIDEO: GMA950 1280x800x32 QE/CI/QE2D (WORKING - GMA950 #1 - LEO4ALLv3)
  • FIREWIRE: FireWire (WORKING - 400MBs - OUT OF BOX)
  • LAN: Intel Pro VE 100 LAN (WORKING - Intel Pro VE 100 - LEO4ALLv3)
  • FINGERPRINT READER: Biometric CoProcessor (WORKING - UPEC.COM)
  • POWER MANAGEMENT: Laptop Power Management/Sleep/Wake/Etc (WORKING - LEO4ALLv3)

Notes:

KEXTS/PATCHES USED:

  • 9.2.2 vanilla kernel
  • intel ichx
  • gma950 (QE/CI Res w/Artifacts)
  • intel pro ve 100
  • appleazalia

NOT USED - UNTESTED:

  • MODEM (LOL @ DIAL UP+FAXING)
  • PCMCIA CARD SLOT

NOT WORKING:

  • Wireless: 3945ABG
  • Multi Card Reader . . .

Satellite U305-S5097

  • Install Method: Kalyway 10.5.1 + Kalyway Combo 10.5.2 Update
  • Chipset: Intel GM945 Express
  • Processor: Intel Core Duo T2350 1.86 GHz
  • Audio: Intel HDA / Realtek ALC268, used ALC268_Installer from here
  • Wireless: Comes with Atheros AR5006X WiFi card, works. Replaced with Dell Card, works too. (Must have PCI patch, here)
  • LAN: Integrated Realtek 8169, works out of the box using (Must have PCI patch, here)
  • Video: Intel GMA 950, works out of box (Minor mouse tearing/artifacts)
  • SATA, DVD, USB & Firewire: Works out of the box
  • Battery meter: Works, see here
  • Speedstep: Works, sleep doesn't work
  • Webcam: Chicony USB 2.0, detected, works sometimes (stable when working, known issue with Chicony on Windows and Mac)
  • Card reader: works
  • Kernel: Vanilla works, but must have the CPUS=1 flag on boot or the system will just restart when loading. Using the ToH kernel with reboot fix enables both cores, not vanilla however. .

Satellite U305-S2812

  • Install Method: Kalyway 10.5.1 + Kalyway Combo 10.5.2 Update
  • Chipset: Intel GM965 Express
  • Processor: Intel Core 2 Duo T5550 1.83 GHz
  • Audio: Intel HDA / Realtek ALC268, used ALC268_Installer from here
  • LAN: Integrated Realtek 8169, works out of the box
  • Video: Intel GMA X3100, works with a display sleep hack, see here
  • SATA, IDE, USB & Firewire: Work out of the box
  • Battery meter: Works, see here
  • Speedstep: Works, sleep doesn't work
  • Wireless: Intel 4965 AGN, doesn't work
  • Bluetooth: not detected
  • Webcam: Chicony USB 2.0, detected, but doesn't work (black screen)
  • Card reader: detected, not tested


Satellite X205-SLi1

  • Install Method: Leo4All 10.5.2, v2 or v3 works, EFI bootloader
  • Processor: Intel Core 2 Duo T7250 2.0 GHz
  • Audio: Intel HDA / Realtek ALC268 -- NOT YET WORKING
  • LAN: Integrated Realtek 8168/8169, works out of the box
  • Video: Dual GeForce 8600M, SLI arrangement not working (Apple-branded drivers probably don't have the capability), but QE / CI IS WORKING on each card separately (one for external LCD, one for built in panel). EFI strings are a must to enable QE/CI, NVInject (all versions I tried at least) leads to kernel panics.
  • SATA, IDE, USB & Firewire: Work out of the box
  • Battery meter: Works
  • Bluetooth: works
  • Wireless: Intel 4965 AGN, doesn't work
  • Webcam: Chicony USB 2.0, detected, but doesn't work (black screen)
  • Card reader: detected, not tested


Satellite A135-S4467

  • Kalyway leo iso used (10.5.2)successfully working
  • Processor: Intel Core 2 Duo T5200 1.60GHz
  • 945GM Express chipset Family (drive date 2/11/2008 Version 7.14.10.1437)
  • Audio and Lan and firewire works
  • video: GMA950 max resolution 1280*800 changeable
  • QE fully working
  • DVD/CD-ROM Pioneer DVR-K17AATA burner works
  • 5-in-1 card reader doesn't work
  • Intel Pro 3945 ABG wireless doesn't work
  • PCI-E Fast Ethernet NIC works
  • PCMCIA(CardBus) doesn't work
  • linksys PCMCIA doesn't work
  • I used the raltek 856 kext to help me with the audio
  • no battery meter . . .
  • sleep doesn't work!
  • headphones jack doesn't work .


Satellite A135-S7403

  • Kalyway leo iso used (10.5.1) used kalyway combo 10.5.2 update; successfully working
  • Processor: Celerom M SS3
  • 945GM chipset
  • Audio and Lan and firewire works
  • video: GMA950 max resolution 1280*800 changeable
  • QE fully working
  • DVD burner works
  • 5-in-1 card reader doesn't work
  • Atheros wireless doesnt work
  • PCMCIA(CardBus) doesn't work
  • linksys PCMCIA doesnt work
  • I used the raltek 856 kext to help me with the audio
  • no battery meter . . .
  • sleep doesn't work!
  • headphones jack doesn't work .

Equium A100-147 PSAABE

  • Leo4All 10.5.2 rev 2: vanilla kernel 9.2.2; Successfully Working
  • Processor: Intel Centrino Duo - both cores supported
  • 945GM - Working out of the box
  • Ram: 1GB
  • Audio: Realtek ALC861 - Azalia Audio Driver to enable output only
  • Video: GMA945 - changeable resolution Max 1280x800
  • DVD Drive: Fully Working
  • LAN: Intel Pro/VE - Fully working using AppleIntel8255x_1
  • Firewire: Fully working
  • Power Management: Fully working using PS2 Keyboard fix package on Leo4All Wiki
  • Wireless: 3945ABG - no working driver to date


Satellite A100-784 PSAANE

  • Kalyway 10.5.1 with Kalyway Combo 10.5.2 update and Kernel 9.2 update; Successfully Working
  • Processor: Intel Core Duo 1.73GHz
  • 945GM chipset - Bus speed detected as 100Mhz only... it should be 667Mhz... but I think it's working at full speed.
  • RAM : 1GB 667Mhz
  • Audio: Intel HDA - Output Working but no Input.
  • Video: Intel GMA950 Changable resolution, Max at 1280x800 QE is supported
  • DVD Drive : Fully Working
  • LAN: Intel PRO VE - Fully Working by using the driver from Kalyway 10.4.10
  • FireWire : Fully Working at full speed... Tested with FCP & Premiere CS3
  • PowerManagement : Working by using Drivers from Kalyway 10.4.10
  • External VGA : Fully Working
  • SD Cardreader : NOT WORKING
  • PCMCIA : NOT WORKING
  • Video Output : NOT WORKING
  • Modem : NOT WORKING
  • Sleep : HAS PROBLEMS

Satellite Pro A100 PSAACE-00400DG3

  • Install Method: iATKOS v1.0i rev. 2 (Then Install Kalyway Combo 10.5.2 Update, After Restart Used TOH 10.5.2 Kernel)
  • Processor: Intel® Centrino Duo
  • Chipset: Intel ICH7R
  • Audio & LAN work
  • Video: ATI Mobility Radeon x1600
  • Video needs the [ATIMobileX1600Pack.zip http://www.itgo2u.com/yhDEV/OSX/ATIMobileX1600Pack.zip] drivers
  • SATA & IDE works
  • Intel® PRO/Wireless 3945ABG does not work . . .
  • PCMCIA Port does not work
  • Toshiba Bluetooth does not work(showed up only once after 10.5.2 Update then had now shown again)
  • SAN DISK Drive does not work . . . .

Satellite Pro A100-830 PSAACE 00W002EN

  • Install method: Used Kalyway 10.5.1 DVD followed by the Kalyway 10.5.2 combo update using the modbin 9.2 kernel (I tried vanilla 9.2 but it caused endless reboot cycle)

Warning: I stupidly installed the Leopard Graphics Update 1.0 and it caused black screen boots with no safe mode possible. Had to fix by booting install disk, going to terminal and removing all graphics related kexts. Best avoid this update on this machine.

  • Processor: Intel Centrino Duo T7200 2 Ghz (detected as 1 CPU 2 cores at 1.99 Ghz)
  • Chipset: Intel® 945PM Express
  • Display: 15.4" TFT Display 1280 x 800
  • Video : ATI Mobility Radeon X1600 256 MB (0x1002 0x71C5)

Lots of trouble here. Played around with ATIMobileX1600Pack and Driver ATI Mobility X1600 Toshi_A100 and got native 1280x800 rock solid in safe boot mode but on a normal boot I experienced random freezing. Seemed to solve that by following tutorials http://forum.insanelymac.com/index.php?showtopic=43074&st=180 http://forum.insanelymac.com/index.php?showtopic=43891 but no Quartz Extreme or CI so I still have work to do to get this 100%

  • Audio: Intel High Definition Audio (ID: 0x1179FF10) working with AzaliaAudio.pkg

I have not tested input and believe it is probably not working

  • Wireless (3945ABG) not yet working but promising drivers under active development
  • Ethernet (Intel82557). I had it working under 10.5.1 with a tweak to the IONetworkingFamily.kext needed to use -f boot flag to make it work correctly. http://forum.insanelymac.com/index.php?showtopic=25477&st=20&p=523297&#entry523297
  • PCMCIA / PC Card initially not working but now recognized thanks to Chun-Nan rev8 http://forum.insanelymac.com/index.php?showtopic=81036
  • USB working fine, at least with pen drive
  • Firewire was fine (had it networked) but seemed to stop working when i got the pcmcia working
  • Sleep / hibernate not working which is very annoying
  • Bluetooth and memory card readers not tested, believed not working . . . . . . .

Satellite A200-1CC PSAE0E-026006GR

  • Install Method: Leo4Allv2 10.5.2, Netkas 9.2.0 SpeedStep Kernel, lots of manual fixes
  • Processor: Intel Core Duo T2080, both cores working fine at around 48°C (IMPORTANT!! REQUIRES INSTALLATiON OF CPU-FAN DRIVERS!)
  • CPU-Fan: working, requires manual AppleACPIThermal.kext!! (http://forum.insanelymac.com/index.php?showtopic=90325&pid=647544&mode=threaded&show=&st=#entry647544)
  • SpeedStep: should work, not tested
  • Audio: ALC-861VD working using patched AppleHDA.kext by MadTux (http://forum.insanelymac.com/index.php?showtopic=63957)
  • LAN: Realtek 8100C working out of the box
  • WLAN: Atheros 5006EG working out of the box
  • Video: working dual screen setup with QE & CI, using the GMA950 driver included in Leo4Allv2
  • Trackpad: scrolling working with ALPS Glidepad drivers & manual hacks (http://forum.insanelymac.com/index.php?showtopic=88811)
  • Not Working:
    1. Hardware volume knob (if you need it, use a patched AppleAzaliaAudio.kext with your hardware id, it gives you basic internal speaker output, sometimes stuttering, and no external jack or input support)
    2. ACPI Sleep lasts forever
    3. PCMCIA cards
    4. SD Card Reader
    5. Function keys for brightness dimming, media controls, etc . . . . . . . . .

Satellite A100-VA9

  • Install Method: BrazilMac 10.5.0, custom post patch, Apple 10.5.2 Combo update
  • Processor: 2 cpus detected
  • Audio: working using AzaliaAudio package
  • LAN: ethernet working after adding devid to AppleIntel8255x.kext, wifi not functional, replaced with Dell 1490 Broadcomm card.
  • Video: working with NVinjectGo 0.2.0. Full QE/CI. External monitor/TV Out not tested
  • SpeedStep: Fully supported and working with ToH 9.2 Kernel, ACPICPUThrottle and SpeedStep.app
  • Not Working:
    1. PCMCIA cards
    2. SD Card Reader
    3. Function keys for brightness dimming, media controls, etc . .


Satellite A205-S5800

  • Install Method: Kalyway 10.5.1 + Kalyway 10.5.2 combo upgrade
  • Audio: working
  • LAN: Working great!
  • Wireless: RTL8187B (Works great with a little tweaking which will be explained)
  • USB: Working
  • PMCIA: Working
  • 56k Modem: Working (ha ha)
  • Batter Icon: Working with tweaking
  • Video: Working with a kext file added.
  • Blue Tooth via USB: Working
  • Mighty Mouse & Keyboard: Working
  • Sleep Mode works like a charm! ;)
  • Apple Updates to date are currently working!

I couldn't stand how no one told me how to do this the easy way so here is my own step by step tutorial for everyone to use! Enjoy!

1) Plug in a external monitor otherwise all you will see is a blue screen booting up. Insert the Kalyway 10.5.1 install dvd and hit f8 when prompted. Type: vanilla cpus=1 and hit enter. Wait for about 10 minutes for everything to load up. Select your language click next than go up top and click on utilities and click on the disk tool. Click on the harddrive name and not the partition, click on erase select mac extended (journaled) and click erase below it. Now make a partition by clicking on partition near the top go down near the bottom and click on options and make sure it is set as MBR (Master Boot Record) and make that partition. Click on the red dot (aka the x button) to close out back to the main menu. Click next then I agree. Now make sure you hit Custom Installation here. Click it. Put a check mark on everything except the bottom one. click on the drop down arrow and de select GUID and Select MBR instead. YAY now click on install! 2) As soon as the installation is complete and the computer restart quickly take out the dvd. hit f8 when prompted again. This time I am going to have you bypass the setup program because it stays on a continues never ending loop. OK so type in: -v -s and wait for everything to load. You should still be at the black scrren with text. Now type in: /sbin/mount -uw / and hit enter. now type in: touch /var/db/.AppleSetupDone and hit enter. Now we need to setup the password for the account root. Type: passwd root and hit enter. It will ask what you want the password to be. just put what you want and hit enter again. All done with that! Now its time to see Leopard in action (with the external monitor for now of course). Type exit hit enter. (sometimes you may need to repeat that twice.) It will now load up. for the username type in root then obviously your password. 3) Now that you are in before fixing everything lets get this external monitor out of here. On a different computer go to google and download kext_helper.zip and appleintelgmax3100.kext and appleintelgmaxfb.kext put those on a disk or usb drive and connect it to the laptop. Open kext_helper.zip Once opened drag n drop the 2 kext files onto the opened program, type in the password than click easy install. Reboot the laptop when done and unplug the external monitor! It works on the native screen now! Dont worry about the wrong resolution. Just wait. 4) Insert the kalyway 10.5.2 upgrade combo dvd and install. Not so hard. reboot. (Dont be alarmed when it reboots again by itself when it is partially loaded back up). 5) Now you native monitor is now fully supportive with all resolutions!! Onto the wireless internet. Once again on a different computer go to the realtek website and download the rtl8187b driver for mac osx 10.3 - 10.4 Before we install this we need to delete a text because leopard will get confused. Click on the hardrive and go to system/library/extensions folder and find rtl8187.kext. Move that babey to the trash and empty it! Now install the newly download package and reboot. When we are back on find the terminal either by searching or unless you already know where it is. Open it up. Type these. cd / hit enter cd /system/library/extensions/rtl8187bt.kext/contents hit enter sudo nano info.plist hit enter now use the arrow keys to go up and down. Find near the bottom <integer/>33161</integer> and change the numbers to 33175. when done press control and x. Press y for yes and hit enter. Done. If it doesnt show up already go to applications and click on the realtek app to connect to the internet! (you might need to reboot first). 4) To get the battery icon working follow the instructions here: http://apple2pc.blogspot.com/2008/03/power-management-on-hackintosh.html 5) Congratz!!!! You are now one of very few with a fully working hackintosh laptop! You can now download all the updates and install any program! 6) Now make your own account. Its not the best to be using the root account! Now have fun!!

Satellite A205-S5804

  • Install Method: Kalyway 10.5.1 + Kalyway 10.5.2 combo upgrade
  • Processor: 2 cpus detected
  • Audio: working
  • LAN: ethernet and wireless working
  • Video: working, need an external monitor to install
  • How to install: (If anything major, not the basics)

1) install Kalyway 10.5.1, vanilla kernel and mbr; 2) reboot and boot with -v -s option; 3) delete AppleIntelIntegrated.kext 4) reboot with external monitor connected; 5) boot with -v -s and run command "touch /var/db/.AppleSetupDone"; 6) run command "passwd" and choose a root password; 7) copy natit.kext to Extensions directory; 8) in file Info.plist of AppleYukon2.kext change 8053 to 8039 and 4362 to 4353 9) 10.5.1 should be working now; . . 10) download Kalyway 10.5.2 upgrade and install 11) if you get error 35.. hostname.. go to Preferences>Sharing and set a Computer name 12) if wired ethernet is not working, copy the IONetworkingFamily.kext from the 10.5.1 install; 13) install the driver from Realtek RTL8187B 14) change 33161 to 33175 . . . . . . . . .

Satellite A205-S5859

  • Install Method: Kalyway 10.5.2 (also tried Leo4AllV2, which installed slightly easier but had more problems in the installed version)
  • Processor: 2 CPUs detected (1.83GHz Pentium Core 2 Duo).
  • Audio: Working out of the box (did not work with Leo4All).
  • Video: Working out of the box, but no CI/QE; see below for instructions to enable CI/QE.
  • LAN: Ethernet working out of the box.
  • WiFi: Not working! Uses Intel 4965AGN; see here for project to write driver.
  • USB: Works with vanilla and kabyl kernels; speedstep kernel requires re-installation of USB drivers on every boot.
  • Built-in webcam: Detected as USB device, but not working yet.
  • Modem: Not tested
  • ExpressCard slot: Not tested
  • Sleep mode: Computer sleeps successfully, but wakeups sometimes cause hangs (50/50 chance of successful wakeup)
  • How to install:
    • Boot Kalyway with -x option (after pressing F8 to set options); omitting this results in a kernel panic.
    • Select desired options. Note that Intel GMA X3100 video driver works, but without CI/QE (required to watch DVDs, among other things).
    • To get CI/QE video working, see post #181 in this forum thread. Note you'll need Apple's Graphics Update, the AppleIntelGMAX3100FB.kext from Kalyway (also referred to by user simcolor in that thread), and possibly a Natit.kext referred to earlier in the thread. I did not need the SwitchResX utility referred to by some posters. Note that some configurations can produce an unusable display, so you may need to boot into single-user mode (-s boot option) or log in remotely via SSH (after enabling this feature) to fix a broken configuration.

Resulting system seems to work quite well, aside from lack of Wi-Fi and a non-functional webcam. (See the components HCL for advice on USB Wi-Fi sticks.) Not bad for a $600 laptop. .

Satillite M105-S3004

  • Install Method: Kalyways's 10.5.1 with 10.5.2 Update
  • Chipset Intel 945GM
  • Processior: Intel Core Duo 1.66 GHz
  • Atheros AR5BXB6 working with patching
  • SATA Working out of box
  • Cardreader not working
  • ALC861 Sound Card recognized but no volume slider adjustment, no output volume so far either
  • USB works
  • Eithernet Card Works

Satellite M115-S3094

  • Install Method: Kalyway 10.5.1 & Combo Update
  • Chipset: Unknown
  • Processor: Unknown
  • Audio: Unknown Model, works
  • LAN: Unknown Model, works
  • Video: Unknown Model, works
  • SATA & IDE: Unknown
  • Wireless doesn't work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

One

C7010

  • Install Method: iATKOS r2 & Kalyway's Combo Update & Vanilla Kernel
  • Chipset: Intel GM965
  • Southbridge: Intel 82801HBM (ICH8-ME)
  • Processor: Intel Core 2 Duo T8100 (2.1GHz Penryn up to SSE4.1)
  • Audio: Realtek ALC883 - use kext [4]; internal mic not working
  • LAN: Realtek RTL8168/8111 - working out of the box
  • WLAN: Intel WLAN 4965 AGN - not working
  • Video: Mobility Radeon 2600XT 256Mb GDDR3 - only working without kext - boot in safe mode and delete ATIRadeonX2000.kext
  • Display: GlareType 1680x1050 - only working with 1400x1050
  • SATA: Intel 82801HBM SATA AHCI for HDD - working out of the box
  • IDE: Intel ICH8M Ultra ATA Storage Controller for DVD - reading and burning working right out of box
  • Bluetooth: Toshiba Bluetooth Controller - recognized, but not tested
  • USB: Intel ICH8 Family USB Controller - works
  • Trackpad: working, enhance with 2-finger-scrolling [5] . . . . . . . . . . . . . .
Powered by MediaWiki © 2015 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   PHP hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers