Editing HCL 10.5.8/Desktops

Jump to: navigation, search

Warning: You are not logged in.

Your IP address will be recorded in this page's edit history.
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 1: Line 1:
{{Desktops|10.5.8}}
+
{{10.5.8}}
 
+
 
===DELL Dimension 9200===
 
===DELL Dimension 9200===
 
*Core Quad 6600 2,4 Ghz
 
*Core Quad 6600 2,4 Ghz
Line 211: Line 210:
 
**Kernel 9.7.0voodoo
 
**Kernel 9.7.0voodoo
 
**ps/2 mouse and keyboard installed
 
**ps/2 mouse and keyboard installed
everything works perfectly. on board network worked right after first install shows up as macpro 2.48 ghz intel core solo. 100% perfect in functionality.
+
everything works perfectly. on board network worked right after first install shows up as macpro 2.48 ghz intel core solo. 100% perfect in functionality. . .
  
  
Line 268: Line 267:
 
* Sleep/power-down/reboot do not work - all hang
 
* Sleep/power-down/reboot do not work - all hang
 
* Was able to update to 10.5.7 using Software Update; only had to reinstall ALC888 driver and IONetworkingFamily fix
 
* Was able to update to 10.5.7 using Software Update; only had to reinstall ALC888 driver and IONetworkingFamily fix
* Was able to subsequently update to 10.5.8 using Software Update; as before, had to reinstall ALC888 driver and IONetworkingFamily fix and all is well
+
* Was able to subsequently update to 10.5.8 using Software Update; as before, had to reinstall ALC888 driver and IONetworkingFamily fix and all is well . . . . .
  
 
=== Dell Vostro 200 Slim Tower ===
 
=== Dell Vostro 200 Slim Tower ===
Line 280: Line 279:
 
*  Ditched the Radeon and bought a 35 USD WinFast GeForce PX8400 GS TDH All works but Quartz Extreme:Not Supported You need NVinject 0.2.0 for dual head  Not the Works with NVinject 0.2.1
 
*  Ditched the Radeon and bought a 35 USD WinFast GeForce PX8400 GS TDH All works but Quartz Extreme:Not Supported You need NVinject 0.2.0 for dual head  Not the Works with NVinject 0.2.1
 
* Was able to update to 10.5.8 using Software Update and you should
 
* Was able to update to 10.5.8 using Software Update and you should
  only had to reinstall ALC888 driver from the DVD iPC, easy... just locate it and double click
+
  only had to reinstall ALC888 driver from the DVD iPC, easy... just locate it and double click . .
* shut down not working it will restart... anyone has a suggestion about this?
+
* shut down not working it will restart... anyone has a suggestion about this? . . . . .
  
 
=== Packard Bell ===
 
=== Packard Bell ===
Line 305: Line 304:
 
Took a backup of all the kext files.
 
Took a backup of all the kext files.
 
Downloaded the iDeneb Combo upgrade 768 Mb. Installed it, copyed the backup kext files back. First restart run with the -v -f mode to make sure all kext files loaded.
 
Downloaded the iDeneb Combo upgrade 768 Mb. Installed it, copyed the backup kext files back. First restart run with the -v -f mode to make sure all kext files loaded.
Everything works.  
+
Everything works. . . . . . .
  
 
==Compaq Evo D510==
 
==Compaq Evo D510==

Please note that all contributions to OSx86 may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see OSx86:Copyrights for details). Do not submit copyrighted work without permission!

Cancel | Editing help (opens in new window)
Powered by MediaWiki © 2015 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   PHP hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers