HCL 10.6.3/Portables

Mac OS X 10.6.3
Hardware Compatibility

Portable Computers
Desktop Computers
Hardware Components

This is a hardware compatibility list for portable computers. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying a portable computer. Don't forget to add how you got OSx86 running on your portable x86 computer, and to use proper English. Please see the discussion page for proper instructions on how to input your system specs. Also, please contribute to the HCL 10.6.3 page, which should list a more granular view of compatibility. If your computer isn't listed, you should try it if you have a SSE2 or higher processor. Use vanilla kernel if it is supported.

ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
Please add hardware into tables.
This is for 10.6.3 builds only.

Please list your computers in alphabetical order by manufacturer (Asus, Acer, Dell, HP, etc)

For how to edit the Wiki, please see this thread. Thank you!

Note: Please add whether your device supports QE, Quartz Extreme, graphics. Try playing a movie with Quicktime Player.

Positivo

Positivo Z77

QE
File:Icon n.png

Install Method: iAtkos S3 DVD
OS Version: 10.6.3
CPU: Intel Core 2 Duo 2.00 Ghz
RAM: 2GB DDR2
Graphics: S3 mirrage working with 1280x800 resolution not QE/CI not dual monitor.
Sound: Works fully including mic with voodooHDA
DVDRW Drive: Working ...funcionando...
Wired Network: Working ...funcionando...
WebCam: Not working ...não funcionou...
Wireless Network: choose realtek in customise options ...escolha a opção realtek no menu de customização...
Keyboard/Trackpad: Works with VoodooPS2 trackpad, including doulble finger scrolling and clicking. ...funcionando com VoodooPS2 trackpad, inclusive p rolar paginas com dois dedos e o click...
Power Management: Battery Management working using VoodooBattery kext. "sometimes canot reboot" Disabled sleep mode to prevent issues. ...gerenciamento de bateria funcionando com o VoodooBattery kext. "As vezes não reinicia. O modo sleep desabilitei para evitar problemas"...
Time Machine: Works! Im back up and restore many times.
Additional Notes: dual boot W7 with chamaleom manager. first install mac os and after W7. after install W7, Put a iAktos dvd and choose repair on menu. Done!! dual boot. Not conect nothing on usb ports before the Mac Os up! you got a error. Search on youtube a video of the machine working ...Dual boot com o W7. Primeiro instale o Mac Os e depois o W7, depois de instalar o W7, Coloque o dvd do iAktos no drive e quando aparecer a barra de menu escolha reparar. Pronto!! dual boot. Não conecte nada nas portas usb antes de iniciar o Mac Os! Pois dá erro...

Acer

Aspire One Netbook

Installed

iAtkos S3 Version 2
Used External USB Hard drive with iAtkos restored using Disk Utility on my Mac

Bootloader

AsereBLN v1.1.9

Patches Installed

/Extra directory
fakesmc
Disabler
RTC
EVO Reboot
Sleep Enabler
Atom Kernel

Drivers

AHCI SATA
Voodoo PS/2
Voodoo P-State
Battery
Card Reader
TSC Sync
Intel VGA
Atheros Wifi & Wired

Setup Notes

I don't know if it was my USB drive, or an issue with the installer, but I kept getting a kernel panic when booting installer. I installed Chameleon 2.0 on a thumb drive and just used that as a boot device, selecting my other USB drive as the boot drive and it loaded perfectly. Also needed to use a thumbdrive with the Chameleon 2.0 RC1 installed on it to get the system out of the reboot loop.

Aspire 5810T

QE

Install Method: iAtkos S3 DVD + Apple 10.6.3 Update
OS Version: 10.6.3
CPU: Intel Core 2 Duo SU9400 @ 1.4GHz
RAM: 4gb DDR3
Graphics: Intel 4500HD (works at full 1366 x 768 resolution, but no acceleration)
Sound: Works after patching AppleHDA kext fully, all inputs
DVDRW Drive: Works OOB
Wired Network: Works with the AtherosL1cEthernet.kext found at [1]
Wireless Network: Not working yet
Bluetooth: Works OOB, activated from Fn-F3
Acer CrystalEye Webcam: Recognized by OSX as a USB webcam, however no graphic acceleration means I am unable to check its functionality. It's a matter of kext since when installing from another source the webcam turned on to take a snaphot of me.
Keyboard/Trackpad: Works OOB with iatkos S3 kexts, called VoodooPS2 + trackpad, Multi-touch ?(don't know how to test it)
Power Management: Battery Management working using VoodooBattery kext. Shutdown/Restart also work OOB. Sleep locks the partition, needs to be mounted+unmounted from Disk Utility (dvd)
Acer Launch Pad: Soft-Touch-sensitive volume controls/scroll wheel both work OOB
Additional Notes: Failed installing other distributions of Snow Leopard, System is very usable but battery life is shorter than Windows Vista, not benchmarked. Viewing films/videos with QuickTime works.

Aspire 6930g

QE

Intel Mobile Core 2 Duo 2.00GHz T9550
Install Method: iAKOS S3 V2
Bootloader: Chamelon v2 RC5
Bootloader Op: 32-bit boot, legacy logo
Patches: Leave Default and select the following: RTC 32-bit, MODIFIED KENNELS: qoopz 10.3.0, Intel SATA/IDE
Video: Will Give You 32MB As Default, Apply NVinject 0.2.1 Not The 512MB Verson.
Audio: Azalia Audio (Search Forums)
LAN: Not Working, AttansicL1eEthernet ment to work
+ - Play pause stop forward Works and in VLC Player
SATA & USB: Work OOB
Sleep, Shutdown & Restart Work = Not Tryed Sleep As I Dont Use It
Successfully updated iTunes 10 & Quicktime 7.5.7 Player via Software Update.:)

Notes! - You will need a USB mouse as the TouchPad Dosnt Work try searching the forums for "Synaptics TouchPad"

Aspire 6935

QE

normaly updated from 10.6.2 without problems

Aspire 4320

QE

Parts	Device	Working	Notes
Processor	Core 2 Duo T7100	Yes	Out the Box
SATA	Hard Disk (ICH8 Family)	Yes	Out the Box
PATA	DVD+/-RW (ICH8 Family)	Yes	Out the Box
Graphics	Intel X3100	Yes	Out the box
Audio	HDA ALC268	Yes	VoodooHDA.kext
Wireless	Broadcom BCM4311	Yes	Out the Box
USB	USB 2.0 (ICH8 Family)	Yes	Out the Box
Ethernet	Broadcom BCM5787M	Yes	Patched driver by Nobb1x
Bus PCIe	Intel GL960/GM965	Yes	Chun-Nan´s IOPCMCIAFamily (32 bits)
Battery	Integrated	Yes	VoodooBattery.kext
FireWire	Ricoh R5C832	Yes	Out the Box
Card Reader	Ricoh R5C822	Partially	IOSDHCIBlockDevice.kext (32 bits)
Modem	Integrated	No	Who needs a modem today?

Aspire 4570

QE

Update from 10.6.2 with the netkas procedure -wifi: work -video: no QE/CI, full res with radeonhd.kext -audio: work (voodooHDA) -Ethernet: work -Card reader: not work

Extensa 5620z

QE

Installation Method : iAtkos S3 V.2 or Snow Leopard 10.6.3

Parts	Device	Working	Notes
Processor	Intel Pentium Dual Core T2390	Yes	Out the Box
SATA	Hard Disk (ICH8 Family)	Yes	Out the Box
PATA	DVD+/-RW (ICH8 Family)	Yes	Out the Box
Graphics	Intel X3100	Yes	Out the box
Audio	HDA ALC268	Yes	VoodooHDA.kext
Wireless	Intel 4965AGN	No
USB	USB 2.0 (ICH8 Family)	Yes	Out the Box
Ethernet	Broadcom BCM5787M	Yes	Patched driver by Nobb1x
Bus PCIe	Intel GL960/GM965	Yes	Chun-Nan´s IOPCMCIAFamily (32 bits)
Battery	Integrated	Yes	VoodooBattery.kext
FireWire	Ricoh R5C832	Yes	Out the Box
Card Reader	No Idea	No
Modem	Integrated	No

TravelMate 5730

Install Disk: iAKOS S3 V2

QE

Parts	Device	Working	Notes
Processor	Core 2 Duo T9400	Yes	Out the Box
SATA	Hard Disk (ICH9 Family)	Yes	Out the Box (AHCI method)
PATA	DVD+/-RW (ICH9 Family)	Yes	Out the Box
Graphics	Intel GMA 4500mhd	Yes	Native resolution with intel X3100 drivers but NO QE/CI support!
Audio	HDA ALC268	Yes	VoodooHDA.kext
Wireless	Intel Wifi Link 5100	No	There are no driver for this card yet! you can replace it with a compatible one (e.g. BCM 4311)
USB	USB 2.0 (EHCI Family)	Yes	With native Snow Leopard 10.6.2 IOUsbFamily.kext
Ethernet	Broadcom BCM5764	Yes	Patched driver by Nobb1x
Battery	Integrated	Yes	VoodooBattery.kext
Modem	Integrated	No

Aspire 5920G

QE

T7700 2,4ghz, Intel4965AGN, NVidia 8600GT, CrystalEye,

Method: iAtkos S3 V2 - Snow Leopard 10.6.3
Settings Used: Chameleon V2 RC5, 32bit boot, graphics enabler, -pci
Drivers Used : sata AHCI, VoodooHDA (you have to disable the appleHDA or you get kernel panic), Voodoo Ps/2, (when choosing P-State your CPU will be 2.2 ghz instead of 2.4)
Other stuff : Voodoo Battery

I use this Laptop only for Djing with Serato Scratch Live (works like a charm) and playing around with Mac Apps

Ethernet - not installed
Audio - yes
WIFI - no
Graphics Acceleration - yes
Card Reader - no
Acer CrystalEye Webcam - doesnt work in Photobooth but can be activated for iChat(google)
Sleep doesnt work

Notes: Sometimes I have to boot with -v or OSX wont boot, PS-CS5, Serato, jEdit, Office, iTunes works fine

TravelMate 6292

QE

T7500 @ 2.2GHz, Intel 4965AGN, X3100, 3GB DDR2-800, Acer CrystalEye Webcam

Method: iAtkos S3 V2 on Toshiba Satellite L300 for install, transfer to Acer at first reboot for setup.
Settings Used: USB Fix, X3100 drivers+EFI String, Vanilla Kernel, Voodoo PS/2, Voodoo HDA

WORKING:

Sound
Ethernet
DVD Drive
Full QE/CI/Resolution/Hardware Acceleration
USB 2.0
Bluetooth
Keyboard/Mouse/Webcam

ETHERNET KEXT: http://www.insanelymac.com/forum/index.php?showtopic=218555 download and install IOPCI.kext and the 10.6.3 kext
WEBCAM FIX: google "camtwist" download and install it, set up the webcam effect with PIP (at the bottom of the window) and goto camtwist in the top bar, select prefs and select photo booth and ichat by dragging them from applications to the window. save and exit camtwist. from now on, open ichat/photo booth THEN open camtwist and it will work perfectly! :D
DSDT.aml file for the 6292 can be found here also http://www.insanelymac.com/forum/index.php?showtopic=218555

NOT WORKING:

Wi-Fi (Intel 4965AGN)

You can drop in a broadcom or dell wireless card for wifi, or do as i do and use a Netgear WG111V2 USB 2.0 wireless dongle for wifi :D
Sleep doesn't work, no USB/trackpad/keyboard/screen must be manually powered off (10 second power button hold)
DO NOT USE SOFTWARE UPDATE OR COMBO UPDATES
10.6.3 is the latest fully working OSX ver. working on this laptop

Alienware

m17x R1

QE

Non Dell 2008 Model

Install Method:MyHack 1.1 Patched USB (custom Options Use only Graphics Enabler, ApplePS2Controller, EvOreboot, IONetworking, ElliotForceLegacyRTC, NullCPUPowerManagement, SleepEnabler )
OS Version: 10.6.3
CPU: Intel Core 2 Duo T9300 @ 2.5Ghz
RAM: 3gb DDR3
Graphics: Dual Nvidia 8700m GTX 512mb out of box HDMI Untested so far
Sound: ALC 885 Only Built in Speakers after installing kext & Enabler from Multibeast
DVDRW Drive: Works
Wired Network: Works
Wireless Network: Not working
Bluetooth: Works
Keyboard/Trackpad: Works
Power Management: Battery Management not working Voodoo KExt caused issue working to resolve
Additional Notes: follow MyHAck Method and then run multi beast to install Audio & Fix permissions and cache then you can update to 10.6.5

Asus

N50 VN

QE

Installed IATKOS S3 v2 Works: Wifi (select nothing) Graphics (select nothing) Usb (select io usb fix) mouse and keyboard (select ps2 fix)

G60JX "Republic of Gamers"

QE

Note:

Mine is the Best Buy model (I only mention this because I believe other G60JXs have slightly different H/W).
This laptop requires the MacBook Pro Software Update 1.3.
Don't forget that SL requires GPT.

Install Method: Install from working OSX install. Or kickstart install using Empire EFI boot disc v 1.085 R2 ("Experimental Support for ... Core i5-M , Core i3-M , Core i7M"). 1st boot using Empire. Install 10.6.3 Combo Update if installing from earlier. Once running 10.6.3, edit SystemVersion.plist as described here, then install MacBook Pro Software Update 1.3. Install bootloader and kexts. Edit DSDT: HPET fix (no more NullCPUPM!), SBRG/LPCB Lower temperatures hack, FN button hack. "MacBookPro6,1" in smbios.plist (helps with PM). In c.a.B.plist: "GraphicsEnabler"="Yes" (native NV 360M support) and "system-type"="2" (more PM, identifies system as a laptop). Many of the necessary kexts can be found here.
Bootloader: AsereBLN_v1.1.9
Kernel: Vanilla 10.3.1 in 32-Bit Mode, 64 also works, with the exception of PS2 keyboard and trackpad (32-bit only driver). Small interjection: iATKOS S3 somehow works in 64-bit mode with trackpad and keyboard; yet to find out how.
Kexts: AppleACPIPS2Nub for use with meklort's ApplePS2; meklort's ApplePS2Controller/Pref pane - same link (32-bit only :( ); iats AtherosL1cEthernet; netkas' fakesmc; VoodooBattery; slice/AutumnRain's VoodooHDA 2.61 (Voodoo project's voodoohdahelper also needed, to save settings).
Issues: Sleep. HDMI audio. S/PDIF. Sound device names require Info.plist edit; jack sense works OOB. With AsusHotkeys.kext, all but keyboard backlight controls work. Cardreader needs additional kext available from here.
Other: Full PCI-ID list here. More detailed install guide here.

Part	Device	Working	Notes
Processor	Intel Core i5-430M	Yes	Vanilla 10.3.1. Both cores, all threads. "cpus=1" not needed.
Chipset	Intel HM55 Express	Yes	Native with MBP 1.3 Update
SATA	Intel HM55 Express	Yes	Native with MBP 1.3 Update. eSATA also works.
Graphics	NVIDIA GeForce GTS 360M	Yes	Native with MBP 1.3 Update - Native panel res (1366x768), full acceleration (QE), VGA, HDMI, multi-display; "GraphicsEnabler" in c.a.B.plist is all that's needed.
Audio	Intel HDA Controller / Realtek ALC663 HDA codec	Yes	VoodooHDA rewrite by slice and AutumnRain with plist edit. Jack sense works. No S/PDIF or HDMI audio. Installation: In Info.plist, replace "IOPCIClassMatch" key/string with "IOPCIMatch", "0x3b568086"
Wireless	Atheros AR9285 Wireless Network Adapter (b/g/n)	Yes	Works with a fix.
Ethernet	Atheros AR8131 PCI-E Gigabit Ethernet Controller	Yes	Attansic / Atheros L1C for Snow Leopard (AtherosL1cEthernet)
USB EHCI & UHCI	Intel HM55 Express	Yes	Native support
Trackpad	Synaptics PS/2 Port Compatible TouchPad	Yes	Meklort's ApplePS2 and pref pane, AppleACPIPS2Nub. Tap, multi-finger gestures.
Webcam	Chicony CNF71297 (USB 2.0 1.3M UVC WebCam)	Yes	Native support
Battery	Integrated	Yes	VoodooBattery for menu bar display
Card reader	Ricoh R5U230 PCIe Memory Stick Host Controller / R5U852? PCIe xD-Picture Card Controller / R5U822 PCIe SD/MMC Host Controller (SDA Standard Compliant SD Host Controller)	Yes	Using modified IOSDHCIBlockDevice.kext. Available in SnowLeopardAsus.tgz's Extra folder.
Firewire	Ricoh R5U832 PCIe IEEE1394 Firewire Host Controller	?	Untested (no firewire devices in this house :) )

A6KT "Total Gaming Power on the Go"

QE

Install Method: Download and Flash mine Modded BIOS [2] Install from DVD iAtkOS S3 v2 and select this Options:
Bootloader: Chameleon V2 RC4
Kernel: qoopz 10.3.0 in 32-Bit Mode
Kexts: See this Image.
Issues: When i have pressed FN+F8 the Monitor doesn't work.. Sleep. Shutdown/halt/reboot.
Other: More detailed install guide here Snow Leopard Here Leopard.

Part	Device	Working	Notes
Processor	Intel Core Mobile AMD Turion 64 MT-34, 1800 MHz (9 x 200)	Yes	qoopz 10.3.0 fix
Chipset	SiS 756, AMD Hammer	Yes	Sis/Uli/Via Sata IDE fix
Graphics	ATI Mobility Radeon X1600 (512 MB	Yes	Full acceleration (QE), VGA, multi-display; Kext Here i have used only atindrv.kext, iondrvsupport.kext, atiradeonx1000.kext and atiinject.kext
Audio	SiS 7012 / Realtek ALC650 codec	Yes	I have used Kext content in this package
Wireless	Broadcom 4318 Wireless Network Adapter (b/g)	Yes	Use installer Kext
Ethernet	Realteck 8169 Gigabit Ethernet Controller	Yes	Use installer Kext
Trackpad	Synaptics PS/2 Port Compatible TouchPad	Yes	I Have Used Voodoo PS/2 Controller
Webcam	(Syntek USB 2.0 1.3M WebCam)	NO	Nothing to do!
Battery	Integrated	Yes	Battery
Card reader	Ricoh R5C592 Memory Stick Host Controller /Ricoh SD/SDIO/MMC Host Controller	Yes	I Have used Card Reader in setup
Firewire	Ricoh R5U552 IEEE1394 Firewire Host Controller	?	Untested (in this moment..)

A6U

Install Method: iAtkos S3v2 with Chameleon v2RC5, 32-bit boot, qoopz 10.3.0, VIA SATA/IDE, Voodoo PS/2, Ethernet bootloader option and USBBusFix, RTL8168.
Processor: AMD Sempron Mobile
Chipset: SiS 760GX
Southbridge: SiS 964
Notes: WiFi works, ethernet works, built-in sound does not work, usb sound works
Updates: After successful update to 10.6.8 with MacOSXUpdCombo10.6.8.dmg and legacy_kernel-10.8.0.v2.pkg usb sound stopped working.

EeePC 1201N

QE

Install Snow Leopard 10.6.3 using mosslack's install guide at [3] See also [4] , For MBR partition Scheme [5]

Atom 330 Dual Core works with patched kernel([6])
x86_64 kernel
Hyperthreading
Sound works with patched VoodooHDA
Mic Works
Graphics @ 1366x768
Full GPU accleration (QE/CI)
1080p playback
HDMI out works without sound... must use line out w/HDMI
Camera works
SD card reader works
Function Keys for Brightness, monitor on-off, Volume, etc` (Fixed using Meklort's Asus HotKeys.kext)
Trackpad works with multi-touch gestures
Sleep
Restart/shutdown (with evoreboot.kext)
Bluetooth (on/off with BroadcomUSB270Injector.kext)
AHCI
Onboard ethernet
Netflix streaming (use latest version of Silverlight)

- Not Working: WiFi ( Wifi card my be replaced by a Dell 1510 half mini PCI-E card or a Realtek8191su USB dongle)

G51JX - 3D "Republic of Gamers"

QE

STANDARD MODEL
Install Method: Install using a large USB (8GB) because DVD doesn't work whit kickstart (recognized like HDD). Install using Empire EFI boot disc v 1.085 R2 to boot and insert the USB flash then hit F5, then install normally("Experimental Support for Core i5-M , Core i3-M , Core i7M"). 1st boot using Empire. Install 10.6.4 Combo Update. Once running 10.6.4, Install bootloader and kexts using 'My Hack'.
Graphics enable: Yes and <key>PciRoot</key> <string>0</string> graphics
Bootloader: same use in My Hack
Kernel: Work only mach_kernel of Efi boot disc, look under extra and the "name.dmg"open it an found the kernel use that and it will work.
Kexts: Use the default options of My Hack; iats AtherosL1cEthernet, VoodooBattery, slice/AutumnRain's VoodooHDA 2.61 (Voodoo project's voodoohdahelper also needed to save settings).
Wireless [7]

EeePC 1201N

QE

Install Snow Leopard 10.6.3 using mosslack's install guide at [8] See also [9]

Atom 330 Dual Core works with patched kernel([10])
x86_64 kernel
Hyperthreading
Sound works with patched VoodooHDA
Mic Works
Graphics @ 1366x768
Full GPU accleration (QE/CI)
1080p playback
HDMI out works without sound... must use line out w/HDMI
Camera works
SD card reader works
Function Keys for Brightness, monitor on-off, Volume, etc` (Fixed using Meklort's Asus HotKeys.kext)
Trackpad works with multi-touch gestures
Sleep
Restart/shutdown (with evoreboot.kext)
Bluetooth (on/off with BroadcomUSB270Injector.kext)
AHCI
Onboard ethernet
Netflix streaming (use latest version of Silverlight)

- Not Working: WiFi ( Wifi card my be replaced by a Dell 1510 half mini PCI-E card or a Realtek8191su USB dongle)

Part	Device	Working	Notes
Processor	Intel Core i5-430M	Yes	Vanilla 10.3.1. Both cores, all threads. "cpus=1" not needed.
Chipset	Intel HM55 Express	Yes	Native with MBP 1.3 Update
SATA	Intel HM55 Express	Yes	Native with MBP 1.3 Update. eSATA also works.
Graphics	NVIDIA GeForce GTS 360M	Yes	Native with MBP 1.3 Update - Native panel res (1366x768), full acceleration (QE), VGA, HDMI, multi-display; "GraphicsEnabler" in c.a.B.plist is all that's needed.
Audio	Intel HDA Controller / Realtek ALC663 HDA codec	Yes	VoodooHDA rewrite by slice and AutumnRain with plist edit. Jack sense works. No S/PDIF or HDMI audio. Installation: In Info.plist, replace "IOPCIClassMatch" key/string with "IOPCIMatch", "0x3b568086"
Wireless	Atheros AR9285 Wireless Network Adapter (b/g/n)	No	No driver
Ethernet	Atheros AR8131 PCI-E Gigabit Ethernet Controller	Yes	Attansic / Atheros L1C for Snow Leopard (AtherosL1cEthernet)
USB EHCI & UHCI	Intel HM55 Express	Yes	Native support
Trackpad	Synaptics PS/2 Port Compatible TouchPad	Yes	Meklort's ApplePS2 and pref pane, AppleACPIPS2Nub. Tap, multi-finger gestures.
Webcam	Chicony CNF71297 (USB 2.0 1.3M UVC WebCam)	Yes	Native support
Battery	Integrated	Yes	VoodooBattery for menu bar display
Card reader	Ricoh R5U230 PCIe Memory Stick Host Controller / R5U852? PCIe xD-Picture Card Controller / R5U822 PCIe SD/MMC Host Controller (SDA Standard Compliant SD Host Controller)	No	No driver (VoodooSDHC didn't work)
Firewire	Ricoh R5U832 PCIe IEEE1394 Firewire Host Controller	?	Untested (no firewire devices in this house :) )

eeePC X101H

Mac OS X Snow Leopard Retail 10.6.3 has to be used. OS X 10.6.0 will install but mouse/trackpad impossible to use correctly. GUID only, dualboot possible with NBI and correct partitioning.

QE

Parts	Device	Working	Notes
Processor	Intel Atom N455 1.66 Ghz	Yes
SATA	Hard Disk	Yes	OOB
Graphics	Intel GMA 3150	No/Yes	Runs only in 800x600. To enable full 1024x600 resolution you have to use NBI that patches the GMA 950 kext. No QE/QI.
Audio		Yes	Voodoo HDA 2.7.2, mike's not working
Wireless	Atheros AR9285 802.11b/g Wireless Network Adapter	No/Yes	To enable Wifi you have to install new kexts.
USB	ICH7 Family	Yes	OOB
Ethernet	Atheros L1c AR8152 v2.0	No/Yes	Ethernet works only when new kext is installed and Wifi kext is not installed
Battery	Integrated	Not tested
Web Camera	Integrated	Yes	OOB
Card Reader	Integrated	Not tested

Installation process :

Mac OS X Snow Leopard Retail 10.6.3; Update to 10.6.6; Install kexts (look up). For more information look up http://osxnetbooks.blogspot.com

EEE PC 1000HE

QE

Install Method: Install 10.6.0 (also works for 10.6.1) using the method here: [11]. Since Windows 7 was installed before Snow Leopard this particular instance with the intention of dual-booting, the osinstall.mpkg swap-out hack was performed, described here: [12]. Make a note of partition sizes. All parts bold in this section pertain to dual-booting. Since I never had any luck with NetbookInstaller, I did everything that it did manually (dropping KEXTs that worked in the Extra/Extensions folder, building the Extensions.mkext with Kext Utility, editing the com.apple.boot.plist file with the edits mentioned in the table, dropped the Atom Mach Kernel in the root of the drive, assembled a patched DSDT (coming in a future bundle), and installed the latest version of Chameleon 2. The update to 10.6.2 went painlessly (just execute the update bundle [13]), the same went for 10.6.3 [14]. After installing and updating, your Windows boot will be messed up. To fix it, you will need a USB optical drive. Put your Windows 7 disk into the drive, boot from it, click through the wizard until it displays "Install Now". Instead of clicking that, click "Repair My Computer". It will scan for a Windows install and not find one (the one it's looking for is not on an "active partition"). Click through to get to the tools, then click on the Command Prompt link. Then, type out the codes in this sequence:

Diskpart
list disk
select disk # (the number that matches the size of the internal hard drive, pretty much always 0, though I had it listed at 1 at one point)
list partition
select partition # (the partition you installed WINDOWS on)
make active

That will make the Windows partition the bootable partition. After this, restart and boot from the optical drive again. Go through the wizard again and click on "Repair My Computer". This time, Windows will find the install on the hard drive and repair it. If it can't fix it once, reboot and do it again. It will get fixed. Anyway, after it's fixed; reboot again and boot from the optical drive. Get to the Command Prompt by the same process as I described above. Type out the same commands as above but make sure to select the MAC OS X partition and make it active. Then, reboot and boot from the hard drive. Hopefully you'll see the slightly-more-awesome Chameleon boot menu instead of that drab Windows boot menu.

Part	Device	Working	Notes
Processor	Intel Atom N280 Single Core Hyperthreaded	Yes	Speedstepping technology works as well! Make sure to use the kernel patched for the Atom series if you don't rely on NetbookInstaller to do it for you (this is listed as an unsupported device)
Chipset	Intel 945GSE	Yes
SATA	Intel 945GSE	Yes
Graphics	Intel GMA 950	Yes	Native with Mac OS X - Native panel res (1024x600), full acceleration (QE), "GraphicsEnabler" Yes, GMA 950 string injection
Audio	Realtek HDA Controller / Realtek ALC663 HDA codec	Yes	Latest version of VoodooHDA.kext works. The microphone does not however, but I have no interest in using it.
Wireless	Atheros AR928X Wireless Network Adapter (b/g/n)	YES	Natively supported. The European model may differ as I heard they used a different network chip.
Ethernet	Atheros AR8131 PCI-E Gigabit Ethernet Controller	Yes	Attansic / Atheros L1C for Snow Leopard (AtherosL1cEthernet)
USB EHCI & UHCI	Intel 945GSE	Yes	Native support
Trackpad	Synaptics PS/2 Port Compatible TouchPad	Yes	Install VoodooPS2.kext before booting on the EEE for keyboard/trackpad support. Hotkeys will not work (except for brightness adjustment)
Webcam	Chicony CNF71297 (USB 2.0 1.3M UVC WebCam)	Yes	Native support
Battery	Integrated	Yes
Card reader		Yes	Native support (even SDHC)

F5SL

Install iAtkos S3 V2 adding the following options:

Bootloader Options
- Graphics Enabler
- -pci1
Drivers
- Main Hardware
  - SATA/IDE
    - VIA SATA
  - PS/2
    - VoodooPS/2 or Apple PS/2 (whichever you prefer, though voodoo PS/2 supports two finger scrolling)

You can experiment with different ATI drivers, but they never made a difference to me. Display works, but graphics performance isn't great, so I don't think it's properly hardware accelerated.

Whatever you do, DO NOT install any networking drivers, it may just be me but every time I install ethernet/wireless drivers it always leads to a crashy installation. Also for some reason if I boot in 32 bit mode, airport is still enabled and hence causes crashing, so you'll have to avoid 32 bit mode.

For internet I'm running a Realtek RTL8188SU, some drivers I've found have crashed in 64bit mode, but I found one that works in this thread which is apparently for the Airlink 101. When you plug the dongle in, for me it crashes if I try to use airport to do anything, so I have to connect to wireless networks and set up profiles etc using the Airlink utility.

Graphics Enabler and pci=1 seem to make graphics reasonably supported - ie Photo booth seems to working, whereas I got a black screen before hand. However I still have no joy with VLC and the like.

I've installed Flash player and tried browsing Flash content with a few browsers, safari and chrome seem to crash instantly, but Firefox seems to work OK.

Feel free to update to 10.6.5 using software update.

Not the best laptop for hackintosh, but it can be done!

After installation download RadeonHD.10.6.x.kext from insanelymac forum http://www.insanelymac.com/forum/index.php?showtopic=190586. Install it with Kext Utility, reboot with flag -f (for sure). I've got my resolution working (1280x800) and my video card recognized as ATI Mobility Radeon HD 3400 (not 3470), but was problem with cursor. Just follow instructions on previous linked page - "In RadeonHD.kext/Contents/Info.plist, set "EnableHardWareCursor" to false. Rebuild the kernel cache and reboot." Resolution works for me only when I boot from flash drive when I have installed Chameleon RC5 bootloader, if I boot from HDD it doesn't work and have some issues with wi-fi.

Safe updated to 10.6.6 with software update. But after safari sometimes hangs up.

N90sv

Install using iAtkos S3 V2 adding the following options:

Used similar options as for F5SL.

YOU CAN USE SOFTWARE UPDATE FOR EVERYTHING (INCLUDING TO 10.6.5) EXCEPT ITUNES. FOR SOME REASON WHICH I HAVEN'T WORKED OUT WHY YET, ITUNES 10.1.1 STOPS SNOW LEOPARD FROM BOOTING. SO DON'T UPDATE IT UNLESS YOU KNOW HOW TO FIX IT.

Bootloader Options
- Graphics Enabler
- -pci1
Drivers
- Main Hardware
  - SATA/IDE
    - VIA SATA/IDE
  - PS/2
    - VoodooPS/2
  - Sound
    - Voodoo HDA (IMPORTANT: make sure only one audio kext driver is selected for installation....or you might get a kernel panic after installation)
  - Laptop Hardware
    - Battery
    - Card Reader
    - TSC Sync
  - NTFS-3G

It took me a couple of times to get the installation to go through completely. When I did get iAtkos 10.6.3 v2 dvd to go through (install) completely, it said that it had failed. However When I rebooted the laptop it worked!!!!!!!! Thus I suggest making sure to burn the install disc at a very low speed

WORKING:

nVidia GT130M Video Card: (Full Resolution of 1920x1080 with QE/CI) (works with Graphics Enabler option and -pci1 option checked)

Audio (very clear actually) (works with Voodoo Sound)

Atheros AR928x Wifi:(works OOTB)

SiS191 Lan: not sure yet haven't checked.

Chipset - SiS 671DX+968 : Works with the Via SATA/IDE kext driver

PS/2 Keyboard and Mouse: Works with Voodoo PS/2 kext driver

webcam works OOTB but shows upside down. Use iGlasses to flip the image

NOT WORKING

shutdown/sleep (feel free to edit a possible solution)

G72GX "Republic of Gamers"

Current Version: 10.6.6

Method of Install: iAtkos S3 v2

Graphics card: works with "NVEnabler" and bootloader option "Graphics Enabler" kexts

PS/2 Keyboard/Trackpad: work with Voodoo PS/2 kext

Sound: works with "Voodoo HDA" and "Apple HDA 10.6.2" kexts

Optical drive: Works with "AHCI SATA" kext

USB: works

Webcam: works

Card Reader: works with "Card Reader" kext

Battery Meter: works with "Laptop Battery" kext

Ethernet: works with "Realtek RTL811" kext

WiFi: works with "Atheros" kext

HDMI: haven't tested yet

Sleep Mode: doesn't work (don't try to use "Sleep Enabler" kext)

Note: use "Chameleon 2 RC5" bootloader (default bootloader takes too long to load)

Benq

JoyBook A52

First actualised using Windows XP BIOS on that laptop to version 3.0.

Note: I didn't have DVD (destroyed) so used Plop Boot Manager on 1GB pendrive (this laptop only can boot from 1GB pendrive, and not all 1GB pendrives!!!). Then I booted installator from 16GB pendrive (to make usb installator you can for example use diskutility in mac os x. Restore downloaded installator image to usb pendrive and after that install chameleon 2. If installation of chameleon stops/stucks/no progress, try other versions of chameleon). To install Plop Boot MAnager: - delete every partitions from 1 GB pendrive. In unix/mac in terminal type: sudo dd if="name and localisation of plpbt.img file" of=/dev/diskN bs=1m, where N is number of 1GB pendrive. To check N in mac os x, type in terminal: diskutil list

Install Method: iAtkos 10.6.3 - kernel originally installed, nothing modified
Partition Scheme: Master Boot Record

Processor: 2x 1,87GHz 2 cores works
VGA: ATI Radeon Xpress 200M works Callisto_for_Snow_Leopard_10.6.2.pkg (resolution only!!! no QE)
Sound: AppleAzalia kext
LAN: works with Realtek 8139 pkg
Wifi: Atheros AR5006EG not working (if found solution, tell me: xxxluzxxx@me.com)
Powermanagement: VooDoo Battery 100% works
USB 100% works
PS/2 mouse and keyboard works with VoodooPS2 kext (mouse too fast), ApplePS2 (perfect!)
Copy from installator AppleVIAATA.kext, and repair permisions. If not: "still waiting for root device".

If You use chameleon 2, delete any kexts for ATA/SATA suppoer from /Extra/Extensions and boot with -f flag for first time.

Joybook S32B-LE16

QE

Install Method : IATKOS S3 V2.
Kernel : Darwin 10.3.0 (32 Bits) - PC EFI 10.6 - No DSDT.
CPU : Intel Core2Duo T5250 @ 1.50GHz.
RAM : 1 Gb DDR2 @ 667 MHz.
GPU : Intel GMA X3100 chipset GM965 - QE/CI fully working - Resolution max: 1280x800.
DVD-RW : Works OOTB.
USB : Works OOTB.
PCI : Needs IOPCMCIAFamily.kext.
Firewire : RICOH compliant IEEE 1394 @ 400 MHz - Works OOTB.
Keyboard/Trackpad (2 Finger Scrolling)/Fn keys : Work with VoodooPS2Controller.
Sound/Mic/Earphone : Work with VoodooHDA.
Wireless : Atheros AR5006EG - Works OOTB as Airport Extreme Card (so it can be used as a router).
LAN : Marvell Yukon 88E8055 - Works with edited Yukon2 info.plist.
RICOH 4 in 1 Card Reader : Works partially with IOSDHCIBlockDevice or VoodooSDHC (only SD).
Webcam : Benq QEye (Suyin) - Works OOTB with iChat (doesn't work with Photo Booth).
Battery : Works with VoodooBattery.
ShutDown/Restart : Work with EvOreboot.
External Display : Works OOTB except mirroring.
Sleep : Doesn't work (No KP when using SleepEnabler.kext, but keyboard and trackpad will be freezing).
Kexts used : VoodooHDA - VoodooPS2Controller - VoodooBattery - FakeSMC - AppleIntelPIIXATA2 - Disabler - ElliottForceLegacyRTC - NullCPUPowerManagement - IOSDHCIBlockDevice - IOPCMCIAFamily - AppleACPIPS2Nub - IOAHCIPortInjector.
NOT WORKING : Modem and S-Video.

Dell

Inspiron XPS 16 / 1645 (i7 version)

WHERE'S THE WORKING TUTORIAL FOR THIS??!!

QE

Install Method : iBoot+Osx Snow Leopard 10.6.3 ISO
OsX Version : 10.6.3 - iBoot
CPU : Intel i7 720QM @ 1.60GHz - Quad Core
Graphic card : ATI Mobility 4670 - Only output is via DisplayPort port, can't get desktop on internal screen.
RAM : 2x4 Gb DDR3, OSX only sees 4GB. (bootloader uses maxmem=4096 kernel flags)
Hard disk : 256GB Samsung SSD
DVD-RW : Works out of the box.
LAN : Intel - doesn't work out of the box, not tried any kexts yet.
Firewire : Seen by system, not tried any devices yet.
Keyboard/Trackpad : Works, not tried trackpad prefs yet.
Sound : Intel : Works out of the box.
Wireless : Intel : Doesn't work, not tried any kexts yet.
Bluetooth : Doesn't work, not tried any kexts yet.
RICOH 3 in 1 Card Reader : Not tested.
Power management : Doesn't sleep. Not tried any kexts or fixes yet.
ShutDown/Reboot : Works, but looses CMOS settings.
Kext used : None
Thread / knowledge collection : [15]

Inspiron 1420

Install Method: iAtkos S3 v2
Chipset: Intel
Processor: Intel Core 2 Duo T7500
Audio: Model: VoodooHDA 2.5.2
LAN: Ethernet
Video: OBO
How to install: Follow this EXACTLY
1. Boot iAtkos s3 v2 using -v. Once loaded, partition using GUID. Click on customize and choose the following. YOU WILL HAVE TO DESELECT SOME OF THE DEFAULT ONES. Only select the ones listed.

Bootloader: Chameleon v2 RC4 Bootloader Options: Ethernet Patches: /Extra Directory, FakeSMC, Disabler, EVO Reboot Drivers: Apple PS/2, Battery and Card Reader (Under Power Management) and Broadcom (wireless).

No need to install NTFS-3G, Snow Leopard natively supports NTFS read/write. You can activate it from terminal.

Inspiron 1545

   Install Method: iAtkos S3 v2

   Processor: Intel Core 2 Duo T4500
   
   How to install: same as inspiron 1420. Follow this EXACTLY

Boot iAtkos s3 v2. Once loaded, partition using GUID. Click on customize and choose the following. YOU WILL HAVE TO DESELECT SOME OF THE DEFAULT ONES. Only select the ones listed.

Bootloader: Chameleon v2 RC4 Bootloader Options: Ethernet Patches: /Extra Directory, FakeSMC, Disabler, EVO Reboot Drivers: SATA AHCI, Apple PS/2, VoodooHDA Audio, Battery, Card Reader and Broadcom (wireless).

Inspiron e1705

QE

Install Method : EmpireEFI 1.085 + MyHack (included on disc)
OsX Version : 10.6.3 retail disk
CPU : Intel Core2Duo T7200 @ 2.06GHz - Dual Core Works with Voodoo TscSync.
Graphic card : Nvidia 7800 GO - QE/CI work - Resolution max: 1900x1200
RAM : 2Gb DDR2 PC6400(800) runs @ 667 MHz.
Hard disk : 250Gb WD Scorpio black (SATA).
DVD-RW : Works out of the box.
LAN : Broadcom 440X 10/100 - very unstable unless bootswitch maxmem=1024 is used [16]
Firewire : RICOH compliant IEEE 1394 @ 400 MHz - Works out of the box.
Keyboard/Trackpad (2 Finger Scrolling)/Multimedia front key : Works w voodoo kext package this is a synaptics touch pad
Sound : Sigmatel 9200 : Works.
Wireless : replaced stock card w/ Broadcom BCM94322MC a/b/g/n - Works out of the Box.
Bluetooth : Works out of the box.
RICOH 3 in 1 Card Reader : Works.
Power management : Works
ShutDown/Reboot : Works.
Kext used : VoodooHDA - VoodooPS2 - VoodooPowerACPI or VoodooPowerMini - VoodooBattery - Sleep Enabler (do not use the one included with myhack use updated one) - FakeSMC V2 - EvoReboot - AppleIntelPIIXATA - VoodooSDHC.kext - Voodoo TscSync
NOT WORKING PARTS : Original Intel 3945 a/b/g wireless card. Cant wake screen from sleep yet(still researching why)

Inspiron 6400

QE

Install Method : iBoot+Multibeast EasyBeast setup Mac Osx Snow Leopard DVD Retail + 10.6.3 Combo Update (empire efi1.085rc2+ 10.6.3 retail disc works as well)
OsX Version : 10.6.3 - Kernel 10.3.0 (32Bits) - Chameleon RC4 Bootloader.
CPU : Intel Core2Duo T7200 @ 2.06GHz - Dual Core Works with Voodoo TscSync.
Graphic card : Nvidia 7300 GO - QE/CI work - Resolution max: 1440x900. For the GMA 950 Only works with arch=i386 string in com.apple.Boot.plist QE only works with patched kext (which?)
RAM : 2x2 Gb DDR2 PC5300 @ 667 MHz.
Hard disk : 500Gb WD SATA.
DVD-RW : Works out of the box.
LAN : Broadcom 440X 10/100 - Works out of the box.
Firewire : RICOH compliant IEEE 1394 @ 400 MHz - Works out of the box.
Keyboard/Trackpad (2 Finger Scrolling)/Multimedia front key : Works. 2 Finger for secondary click work with trackpad prefpane used in netbooks
Sound : Sigmatel 9200 : Works.
Wireless : Dell 1395 b/g - Works out of the Box.
Bluetooth : Works out of the box.
RICOH 3 in 1 Card Reader : Works.
Power management : Works
ShutDown/Reboot : Works.
Kext used : VoodooHDA - VoodooPS2 - VoodooPowerACPI or VoodooPowerMini - VoodooBattery - Sleep Enabler - FakeSMC V2 - EvoReboot - AppleIntelPIIXATA - VoodooSDHC.kext - Voodoo TscSync
NOT WORKING PARTS : Original Intel 3945 a/b/g wireless card changed by Dell 1395a/b/g.

Latitude D420

QE

--- UPDATE: Dell Latitudes now have their own site with all information about installing osx and fixing bugs etc.

Link: [17]

Install Method : D620SLV1.iso by leppy770m + Mac OS X 10.6.0 Retail DVD + fine-tuning + Combo 10.6.3 Software Update
Processor: Intel Core Duo ULV U1600 1.2GHz (SSE2/SSE3) - Both cores present
RAM: 512 MB DDR SDRAM System Board Memory + 2 GB DDR SDRAM DIMM_B - Works
Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) - aka STAC9200 - Works - 8086:27d8
LAN: Broadcom 57xx - Not interested in; Permanently disabled in BIOS; Removed from leppy770m's distro
VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) - aka GMA 950 - Works with known minor artefacts - 8086:27a2
QE / CI - Work; VRAM (Total): 64 MB of Shared System Memory
IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) - 1.8" 120 GB PATA HDD - Works - 8086:27df
Intel Wireless - Doesn't work - Replaced with Broadcom (Dell Wireless 1510 Wireless-N WLAN Mini-Card) - Works - WiFi indicator is off all the time
PCMCIA/Cardbus - Doesn't work - Not interested in
Battery charge, Airport, Time Machine - Work - Status shows up in menu bar
Speedstep - Status unknown - The CPU fan goes up and down though
Screen Saver - Works (?!) - Screen blanks after 15 minutes - Screen doesn't go blank immediately upon the lid closure
Sleep - Doesn't work - Insomnia is a well-known feature of D420
Restart / Shutdown - Work
USB - Works - I normally install SL onto external USB hard drive
SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 18) - Doesn't work - 1180:0822

Latitude E6400/E6500

QE

Install Method: 10.6.3 Retail via Boot 132 CD ISO
OS Version: 10.6.3
CPU: Intel Core2 Duo P8400 @ 2.24GHz
RAM: 2GiB DDR2
Graphics: Nvidia 160M
Max Screen: 1920 x 1200
Sound: Works (with CalaverX11 Kext bundle [18])
Wired Network: Works
Wireless Network: Broadcom recognized as a native AirPort Extreme device and works perfectly.
Keyboard/Trackpad: Works (with CalaverX11 Kext bundle [19])
Webcam: Works (with CalaverX11 Kext bundle [20])
Additional Notes: Must update (or delete) SleepEnabler.kext in CalaverX11 Kext bundle or else kernel panic will occur after 2nd boot. Sleep/Restart/Shutdown do not work with the CalaverX11 Kext bundle as is. However, Kreeg's Kext bundle will allow sleep to work with LidSleep.kext by disabling Webcam. Restart works with OSXRestart.kext for either Kext bundles.

Studio 1537

QE

Install Method: Iboot supported and 10.6.4 Retail
OS Version: 10.6.4
CPU: Intel Core2 Duo T8400 @ 2.24GHz
RAM: 4GB2 Dual Channel 800MHz DDR2 SDRAM
Graphics: Intel® Integrated Graphics Media Accelerator 4500MHD
Max Screen: 1920 x 1200
Sound: Intel High Definition Audio 2.0 Works native for basic sound used multibeast to install ktext for
Wired Network: Works with ktext from multibeast
Wireless Network: Broadcom recognized as a native AirPort Extreme device and works perfectly.
Keyboard/Trackpad: Works natively can install voodoo ktext and 2 finger scrolling
Webcam: Works natively
Card Reader works with ktext from multibeast
Additional Notes: bluetooth not working or reconized at this point still working on it

Install Method: Hazard 10.6.6 Retail
OS Version: 10.6.6
Wirless: Select Broadcom in installer
Sound: Select lastest Voodoo in installer

Vostro 1720

QE

Install using iBoot supported link: [21].

Lan: working out of the box
Wifi: working after editing info plist
Grafic: working (GeForce 9600 GS)
audio: working ( VoodoHda)
Webcam: woring out of the box
Battery: Working (Voodoo Battery)
Sleep mod : working after installing smart sleep [22] and changing form hibernation mod to sleep mod
Not working : /

Vostro 3700 / 3xxx series with NVIDIA 330M

QE

Install Method : iboot portable 10.6.2 (search: iPortable_Snow_x86_Installer) on external USB, Apple update to 10.6.3 on a desktop with Gigabyte P35-DS4 Board, then back.
OsX Version : 10.6.3 - legacy or chocolate (32Bits and 64bits) - Chameleon RC4 Bootloader.
CPU : Intel i5-430M (2x 2,26 GHz). Cinebench 11.5 render = 1.74
Graphic card : Nvidia 330M - QE/CI work - Resolution 1600x900. Works native with GraphicsEnabler=yes. Cinebench 11.5 OpenGL = 15.5 fps
Graphic card / HDMI : works, tested fullHD on Panasonic Plasma, Dual/Extended monitor=o.k., hotplug=o.k., no sound transfer
RAM : 3 Gb DDR3
Hard disk : 320Gb WD SATA (due to version, newer models get 500 MByte).
DVD-RW : Works out of the box.
USB : Works out of the box.
LAN : Works out of the box. ( 10.6.4 update breaks LAN ! )
Firewire : IEEE 1394 @ 400 Mbps - Works out of the box.
Keyboard/Trackpad : Synaptics 7.2 works out of the box, basic tapping via 10.5.6 Synaptics Trackpad Enabler, no gestures yet.
Internal Sound : works with VoodooHDA_with_volume_control_fix_vostro_3700.kext.zip
Wireless : Dell Card can be replaced by full size Apple Airport Card or compatible to work out of the box. Full size card fits!
Bluetooth : DellBluetoothHCI.1.2.pkg
Card Reader : works out of the box (sometimes, DELL uses different chipsets, some work, some not. Ricoh don´ t works yet).
Power management : doesn't work yet. Battery Time = approx. 100 min
(Deep) Sleep / Hibernate : found working SleepEnabler.kext for deep sleep, see post #281 for setup and download
ShutDown/Reboot : Works. ( shutdown works with DSDT.sml from knowledge thread )
Kext used : VooDooBattery | SleepEnabler.kext #281 |
Not working parts : Internal WIFI ( Airport card works )
Tested Software / Working : File Vault, Cinema 4D, Logic Studio + NI Complete, Adobe Collection + Lightroom 3, iLife working well
Tested Software / NOT Working : Parallels 5 & VM Ware - KP and full system reboot when try to start a VM.
Recommended Firmware : F9
Hints : at 10.6.2 start boot problems may occur. try busratio=20 cpuratio=20 cpu=2. after 10.6.3 update no additional flags needed.
Thread / knowledge collection : [23]

Inspiron 1525

QE

Install Method : Snow Leopard 10.6.3 Retail disk + Boot disk [24]
OsX Version : 10.6.4 (Vanilla kernel) - Can update from 10.6.3 to 10.6.4 + Graphics update without problems.
CPU : Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz
Graphic card : GMA965 (X3100) - Works out of the Box (w/ SleepTrick or patchetd DSDT.aml) - VGA works, HDMI doesn't
RAM : 1x2 Gb DDR2 @ 553Mhz
Hard disk : 160Gb Seagate drive 7200 RPM
DVD-RW : Works out of the box.
LAN : Marvell Yukon Gigabit Adapter 88E804Y (w/ [25])
Firewire : Not tested.
Keyboard/Trackpad : Works, not tried trackpad prefs yet.
Sound : Intel HDA (works with VoodooHDA from [26])
Wireless : Broadcom 4312 (w/ patched IO8211.kext)
Bluetooth : This configuration doesn't come with a bluetooth adapter. However, I tried an external USB adapter and it worked.
SD Card Reader : Not tested.
Power management : Doesn't sleep. (Yet).
ShutDown/Reboot : Works (w/ EvOreboot.kext)
Kext used : AppleACPIPS2Nub.kext ApplePS2Controller.kext EvOreboot.kext fakesmc.kext NullCPUPowerManagement.kext SleepEnabler.kext IO80211Family.kext IONetworkingFamily.kext VoodooBattery.kext VoodooHDA.kext

Vostro 1320

Install Method : iatkos s3 v2 dvd
OsX Version : 10.6.3
Settings : Following the guide for Vostro 1310 http://www.insanelymac.com/forum/index.php?showtopic=243626
Sound : Intel HDA is working
Network : both Broadcom 4312 (wifi) and Realtek 8168 (lan) work properly
Graphics : Vostro 1320 is using GMA X4500 which is unsupported, so there is no QE/CI, and screencapture/Grab/Preview and related graphics programs will *not* work properly (google for more info)
Tested bootloaders : EasyBCD with both the default nst_mac.iso (Charmeleon RC4) and iboot 3.1.1 (replacing nst_mac.iso), working even when osx is installed on logical extended partition

Vostro 1500

QE

Install Method : iatkos s3 v2 dvd
OsX Version : 10.6.3
Graphic card : intel X3100 - in VGA/intel section check EFI string, natit (32-bit), GMA X3100 framebuffer (32-bit). Need to do sleep trick after installation.

Boot dvd with arch=i386 option. Choose PC_EFI bootloader and qoopz 10.3.0 kernel, check 32-bit boot. Also: Sleep enabler, maybe graphics enabler, AChi SATA, Apple PS\2, Voodoo HDA, Evo reboot, all patches, voodoo p-state and battery. It may be not exact.

Dell D620

Install Method: MAC OSX 10.6.3 Retail DVD
OS Version: 10.6.3
CPU: Intel Core2 Duo @ 2.06GHz
RAM: 2GB Dual Channel DDR2 SDRAM
Graphics: Nvidia
Max Screen: 1440 x 900
Sound: Sigmatel 9220
Wired Network: Broadcome
Wireless Network: Intel 3985 ABG not working
Keyboard/Trackpad: Works natively

http://www.r2x2.com/users/lsb/weblog/1b8db/

Dell D630

Install Method: MAC OSX 10.6.3 Retail DVD
OS Version: 10.6.3
CPU: Intel Core2 Duo @ 2.66GHz
RAM: 4GB Dual Channel DDR2 SDRAM
Graphics: Nvidia
Max Screen: 1440 x 900
Sound: Sigmatel 9220
Wired Network: Broadcom 5755 driver link - http://www.insanelymac.com/forum/index.php?showtopic=129984
Wireless Network: Intel 3985 ABG not working
Keyboard/Trackpad: Works natively

Install Guide - http://www.r2x2.com/users/lsb/weblog/1b8db/
Kext Pack - http://osx86.co/f57/dell-d630-kext-pack-t3840/

Dell Precision M4500 (i7 version)

QE

Install Method : iBoot Legacy 2.7.2 +Osx Snow Leopard 10.6.3 dmg (Both USB + DVD works)
OsX Version : 10.6.3 - iBoot Legacy
CPU : Intel Core i7
Graphic card : NVIDIA Quadro FX 880M Graphics with 1GB
RAM : 4 Gb
Hard disk : Works out of the box.
DVD-RW : Works out of the box.
LAN : Works out of the box.
Firewire : Seen by system, not tried any devices yet.
Keyboard/Trackpad : Keyboard works, Touchpad don't.
Sound : Works out of the box. (Volume Controls don't work)
Wireless : Dell Wireless 1501 802.11g 1x1 Mini-Card, don't work
Bluetooth : No Bluetooth
RICOH 3 in 1 Card Reader : Not tested.
Power management : Doesn't sleep. Not tried any kexts or fixes yet.
ShutDown/Reboot : Don't Work. Black screen but System "running"
Kext used : None

Fujitsu

A530

Install Method: iboot-CD + MAC OSX 10.6.3 Retail DVD
OS Version: 10.6.3
CPU: core i3 380
RAM: 2GB Dual Channel DDR2 SDRAM
Graphics: HD-GMA 0x0046 with natit kext QE works
Sound: Works , Internal Microphone not
Wired Network: realtek lnx2mac
Wireless Network: Atheros works with kext
Keyboard/Trackpad: Works natively

Gateway

T-Series Model W350i

QE

Intel Mobile Core 2 Duo 1.99GHz
Install Method: iAKOS S3 V2 10.6.3
Bootloader: Chamelon v2 RC5
Bootloader Op: 32-bit boot, legacy logo, QuiteBoot, Builtin Ethernet
Patches: Leave Default and select the following: RTC 32-bit, MODIFIED KENNELS: qoopz 10.3.0, Intel SATA/IDE
Video: Apply x3100 and niat/efi string
Audio: Voodoo Audio
LAN: All Realtek LAN
WLAN: Athroes Wireless
SATA & USB: Work OOB
Sleep, Shutdown & Restart Work = Sleep Doesn't Work at all
Successfully updated 10.6.5, iLife 2011, iTunes 10.1 & Quicktime 7.5.7 Player via Software Update.
WebCam: Not working Chicony Electronics Co., Ltd. VIN: 0x04f2 Product ID: 0xb027

ML6720

Intel® Dual-Core Mobile Processor T2310

 1.46 GHz | 1 MB L2 cache | 533 MHz FSB

Intel® GL960
Video: GMA3100
Audio: Voodoo Audio
LAN: All Realtek LAN
WLAN: Realtek USB WLAN Client Utility
Sleep not working, shutdown = restart, restart work.

HP

Pavilion DV7-2173CL

QE

My first attempt at an OSx86 machine
Install Method: iBoot 3.02 + MultiBeast 3.6.0; Retail OSX Snow Leopard DVD 1.6.3
Chameleon 2 r5 bootloader r832, booting os with cpus=1 and GraphicsEnabler=no, occasional crash would cause it to refuse to boot without noapic
Used two hard drives, one GPT with OSX, and the other MBR with Windows 7, which is why I think I couldn't ever boot without using the iBoot disc

Parts	Device	Working	Notes
Processor	Intel Core2Duo P7350 2,0GHz	Yes	cpus=1
SATA, chipset	Hitachi HTS723232L9A360 HDD, AHCI, I think? (BIOS doesn't have any of this available)	Yes	OOTB
Graphics	ATI Mobility Radeon HD4650 1GB GDDR3	No	I tried every solution/kext for this I could find on the web, but it always crashes.
Audio	IDT HDA	Yes	VoodooHDA.kext
Wireless	Intel WiFi link 5100 agn	No	All of the kexts I tried didn't work (Voodoo 5100, official Intel installer, etc...)
Ethernet	Realtek RTL8102E/RTL8103E	Yes	OOTB
Keyboard, trackpad	PS/2	Partially	ApplePS2 kext, keyboard working, trackpad working but no tapping/multitouch for now
Battery	Integrated	Yes	Out of box
Webcam	HP Webcam	No	Never bothered
CD/DVD	BD Combo Drive	Yes	OOTB
USB		No	I'm convinced I could get this working if I tried, something about appls.USBUHCI stalling out
Card Reader	SD-MS/Pro-MMC-XD Card Reader	No	Never bothered

As far as I could tell there's no way to get the graphics working with this method. A laptop without graphics, using half its processor and without wireless is pretty useless. I was able to update to 10.6.7 but it didn't change anything.

Pavilion dv7-2250em

QE

Install Method: iAtkos S3 v2 10.6.3
Chameleon 2 r5 bootloader used, booting os with cpus=1 and arch=i386 for now

Parts	Device	Working	Notes
Processor	Intel Core2Duo T6600 2,2GHz	Yes	OOTB, but cpus=1 for now
SATA, chipset	Hitachi HTS723232L9A360 HDD, AHCI	Yes	OOTB
Graphics	ATI Mobility Radeon HD4650 1GB GDDR3	Partially	No QE/CI, RadeonHD.kext for full res
Audio	IDT HDA	Yes	VoodooHDA.kext
Wireless	Intel WiFi link 1000 bgn	No	No kexts for now
Ethernet	Realtek RTL8102E/RTL8103E	Yes	OOTB
Keyboard, trackpad	PS/2	Partially	ApplePS2 kext, keyboard working, trackpad working but no tapping/multitouch for now
Battery	Integrated	Yes	Out of box
Webcam	HP Webcam	No	Not working for now, trying to get it working
CD/DVD	HP DVD RW AD-7561S	Yes	OOTB
USB		Yes	OOTB
Card Reader	SD-MS/Pro-MMC-XD Card Reader	No	Will update when i fix it

Works OK for me but i'll try to fix some problems

G62-237US

QE

Install Method: Older Empire EFI with retail Snow Leopard
I didn't use myhack installer, installed the chameleon provided, and then took the non-usr folder from the empire disk and put it at thr root of the HDD

Parts	Device	Working	Notes
Processor	Intel Pentium Dual-Core T4500	Yes	Vanilla kernel
ATA	Toshiba MK3265GSX	Yes	Out of box
Graphics	Intel GMA 4500M HD	Partially	No QE/CI
Audio	Realtek HD Audio	Yes	You install VoodooHDA.kext using kext helper.
Wireless	Realtek RTL8191SE 802.11 B/G/N	Not Tested	I have not tried any kexts
Ethernet	Realtek RTL8102E/RTL8103E	Yes	With RTL1000.kext (do some googling)
Trackpad + Keyboard	PS/2	Yes	Out of box
Battery	Integrated	Yes	Out of box
Webcam	HP Webcam 101	Yes	Out of box, but can't do much without QE/CI.
CD/DVD	HP CD/DVD TS-L633N ATA	Yes	Out of box
USB	Intel ICH9	Not tested	I have not tried any kexts
Card Reader	SD-MS/Pro-MMC-XD Card Reader	Yes	Out of box

Overall, it works fine! Dualboot with Windows 7 tutorial with HP G62 (In installation guides)

NX6325

QE

seems to be similar to [27]

Install Method: Used disk: Snow_Leopard_10.6.2_SSE2_SSE3_Intel_AMD_by_Hazard. Because PATA (=used for DVD drive here) is not compatible, I had to use Transmac to copy it to an usb stick
AsereBLN Bootloader [28]
usual 10.6.3 stuff: fakesmc.kext, evoreboot.kext, IOAHCIBlockStorageInjector.kext, NullCPUPowerManagement.kext, PlatformUUID.kext, ATAPortInjector.kext, AHCIPortInjector.kext (not sure if really everything is needed)
had to install IOATAFamily.kext from 10.5.8
Issue: sleep/hibernation doesn't work (also in Win7), even with new sleepenabler.kext

Parts	Device	Working	Notes
Processor	AMD Sempron 3500+	Yes	Kernel nawcom annappirtrvh v2
SATA	ATI SB400	Yes	AppleVIAATA.kext with 0x43791002
PATA	ATI SB400	No	CD-ROM not working
Graphics	ATI Xpress 200M	Partially	No QE
Audio	ATI SB450	Partially	VoodooHDA.kext crackles
Wireless	Broadcom BCM4312	Yes
Ethernet	Broadcom BCM5788	No
Mouse	ATI SB400	Yes	patched ApplePS2Controller.kext, VoodooPS2Controller.kext (for multitouch scrolling)
Battery	Integrated	Yes	VoodooBattery.kext to display battery status

lspci -nn

00:00.0 Host bridge [0600]: ATI Technologies Inc RS480 Host Bridge [1002:5950] (rev 10)
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f]
00:04.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a36]
00:05.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a37]
00:06.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a38]
00:12.0 IDE interface [0101]: ATI Technologies Inc IXP SB400 Serial ATA Controller [1002:4379] (rev 80)
00:13.0 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4374] (rev 80)
00:13.1 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4375] (rev 80)
00:13.2 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB2 Host Controller [1002:4373] (rev 80)
00:14.0 SMBus [0c05]: ATI Technologies Inc IXP SB400 SMBus Controller [1002:4372] (rev 81)
00:14.1 IDE interface [0101]: ATI Technologies Inc IXP SB400 IDE Controller [1002:4376] (rev 80)
00:14.2 Audio device [0403]: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller [1002:437b] (rev 01)
00:14.3 ISA bridge [0601]: ATI Technologies Inc IXP SB400 PCI-ISA Bridge [1002:4377] (rev 80)
00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP SB400 PCI-PCI Bridge [1002:4371] (rev 80)
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS482 [Radeon Xpress 200M] [1002:5975]
02:01.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet [14e4:169c] (rev 03)
02:04.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
02:04.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a]
02:04.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
02:04.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c]
30:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11a/b/g [14e4:4312] (rev 01)

EliteBook 8440p

QE

Install Method: Install in MacBookPro, then Modify Bootloader and Install Kexts
BootLoader: Chemeleon RC5 pre6 (RC4 has clock sync issue)
Kernel: Vanilla 10.3.1 in 32-Bit Mode (arch=i386).
Kexts: fakesmc, AppleACPIPS2Nub, ApplePS2Controller, IntelE1000e, IOPCIFamily, LegacyAppleRTC, NullCPUPowerManagement, VoodooHDA
Issue: sleep doesn't work, display cannot wake up from sleep (just use screensaver instead), cannot use external display. Kernel Panic if XCode CHUDProf.kext is installed. Otherwise, very stable. (Must not install XCode). Works on 32-bit mode only, Couldn't find a 64-Bit LegacyAppleRTC.kext. DSDT patching failed.

Parts	Device	Working	Notes
Processor	Intel Core i5 520M	Yes	Vanilla 10.3.1
SATA	Intel QM57	Yes	Works OOTB
Graphics	NVidia NVS3100M	Yes	QE & CI
Audio	NVidia HDA	Yes	VoodooHDA.kext
Wireless	Intel Advanced 6200 N	No	This option from HP doesn't work
Wireless	Broadcom BCM4312	No	This one doesn't work either, only works for Leopard 10.5 from my research
Wireless	USB Wifi	Yes	Got a Mac Compatible USB Wifi and it works fine
Bluetooth	HP Integrated Module	Yes	Works OOTB
Ethernet	Intel 82577LM Gigabit	Yes	IntelE1000e.kext
USB EHCI & UHCI	Intel Chipset	Yes	IOPCIFamily.kext that fixes the PCI2MiniPCI Bridge
Trackpad	Synaptics	Yes	AppleACPIPS2Nub.kext, ApplePS2Controller.kext, Scroll & Tap Works too. Two finger scroll doesn't work. Touchpad is detected as Mouse and therefore it uses the Mouse PrefPane.

NC4400

QE

Install Method: iATKOS S3 V2 Snow Leopard
Bootloader = AsereBLN v1.1.9
Bootloader Options = 32bit boot
Patches = Extra Directory, fakesmc, Disabler, EvoReboot

Do not use the RTC Kernel Panic Everytime

Drivers = VoodooHDA, VoodooPS2, VoodooBattery, EFI String, Natit, GMA 950 27AE, Wifi Broadcom
Quirks = Video Gets Screwed when I close Lid.

Parts	Device	Working	Notes
Processor	Intel Core2Duo T5500	Yes	Only works with CPUS=1 *Really want to find a fix for this. Update: 16/05/2011 I have modified the DSDT as described here by xristos [29] and DUAL CORE ENABLED without KP and Temperature from more than 65 °C (idle) to 47 °C.
SATA	Intel ICH7	Yes	Works OOTB
Graphics	Intel GMA950	Yes	Works OOTB
Audio	HDA	Yes	Works with VoodooHDA.kext
Wireless	Broadcom BCM94311mcg	Yes	Works OOTB
Bluetooth	HP Integrated Module	Yes	Works with this fix [30]
Ethernet	Broadcom 5753M (Ven_14E4 DEV_16fd)	Yes	Works (AppleBCM5751Ethernet.kext fixing MAC address but it works with DHCP great) Need to mod this kext by: 1 Adding the HW id to the Info.plist 2 Hex Editing AppleBCM5751Ethernet and changing 6681FA9D16 to 6681FAFD16 (several places) and F8087559 to F8087459 (one place)[31]
USB EHCI & UHCI	Intel Chipset	Yes	With this fix [32]
Trackpad	Synaptics	Yes	Tap to click and scroll wheel do not work. Update: 24/07/2011 With this fix [33]
Battery	Intergrated	Yes	Use VoodooBattery.kext

Updating directly to 10.6.7 breaks the keyboard and touchpad. Reinstall voodooPS2 0.9.8 pkg resolve all

Update 16/05/2011: - Installed Chameleon RC5 r.760 package, prefpane and default theme. Then I have enabled -P and -C states on boot. [34] - Removed: AppleIntelCPUPowermanagement.kext and AppleIntelCPUPowermanagementClient.kext - I have installed fakesmc 3.1 rev. 493 from here [35] in /S/L/E (ONLY: IntelThermal.kext, FakeSMC.kext, SuperIOFamily.kext, ACPIMonitor.kext, IntelCPUMonitor.kext) to lower the high temp of the CPU. - I have not removed Disabler.kext from /E/E.

NC6400

QE

Install Method: iATKOS S3 V2 Snow Leopard
Bootloader = AsereBLN v1.1.9
Bootloader Options = 32bit boot
Patches = Extra Directory, fakesmc, Disabler, EvoReboot

Do not use the RTC Kernel Panic Everytime

Drivers = VoodooHDA, VoodooPS2, VoodooBattery
Quirks = Video Gets Screwed when I close Lid.

Parts	Device	Working	Notes
Processor	Intel Core2Duo T7200	Yes	Only works with CPUS=1 UPDATE 18/05/2011: I have modified the DSDT as described here by xristos [36] and dual core enabled. Some KP on booting. After 4 or 5 times it start without problems. The temperature from more than 65 °C (idle) to 50 °C.
SATA	Intel ICH7	Yes	Works OOTB
Graphics	ATI Mobility Radeon X1300	Yes	Works with - RadeonHD.10.6.x.kext (Need to Disable HW Cursor In RadeonHD.kext/Contents/Info.plist, set "EnableHardWareCursor" to false) from [37]
Audio	HDA	YES	Works with VoodooHDA.kext
Wireless	Intel 3945ABG	Half working	Works (No WEP, WPA, WPA2) with VoodooIntel3945-06 (From Project Camphor)
Wireless	Broadcom 4311	Yes	Vanilla after fixing the HP Whitelist issue. I gave up on waiting for drivers from Project Camphor.
Bluetooth	HP Integrated Module	Yes	Works with this fix [38]
Ethernet	Broadcom 5753M (Ven_14E4 DEV_16fd)	Yes	AppleBCM5751Ethernet.kext (Still need to Fix MAC address but it works with DHCP great) Need to mod this kext by: 1 Adding the HW id to the Info.plist 2 Hex Editing AppleBCM5751Ethernet and changing 6681FA9D16 to 6681FAFD16 (Could someone clarify this step? These's 6681FA9D16 at 0002FB79, 0002FCAB, 0002FF97, 0003275E, 00032AD2, 00032D03, 00032D8B, 00032E9B, 000337D6, 00033B4A, 00033E36, 000358F9, 0003595F, 00035C3A, 00035D6C, 00035FBF, 00035FF2, 00036410, 00036443, and many others)
USB EHCI & UHCI	Intel Chipset	Yes	With this fix [39]
Trackpad	Synaptics	Yes	Tap to click and scroll wheel need to be enabled through System Preferences -> Trackpad
Battery	Intergrated	Yes	Use VoodooBattery.kext

I have had no problems updating to 10.6.4

UPDATE: Used combo update from iAtkos S3 V2 10.6.3 to 10.6.6, ATI graphics, no problems at all.

NC6400

QE

Install method: iATKOS S3 v2.
In Installer select:
- Bootloader: AsereBLN 1.1.9
- Bootloader Option: 32-bit
Patches
- /Extra Directory
- FakeSMC
- Disabler
- EvoReboot
Drivers
- Voodoohda
- VoodooPS2
- Voodoobattery
- EFI String
- Natit(32-bit)

Audio: Voodoohda
Mouse and Keyboard: ApplePS/2
Intel GMA 950: EFI String, Natit, GMA 950 27AE
CPU: Core Duo but only works with CPUS=1 UPDATE 18/05/2011: I have modified the DSDT as described here by xristos [40] and dual core enabled. Some KP on booting. After 4 or 5 times it start without problems. The temperature from more than 65 °C (idle) to 50 °C.
Wifi: Works (perfectly with BCM43xx)
Ethernet: Works (AppleBCM5751Ethernet.kext fixing MAC address but it works with DHCP great) Need to mod this kext by: 1 Adding the HW id to the Info.plist 2 Hex Editing AppleBCM5751Ethernet and changing 6681FA9D16 to 6681FAFD16 (several places) and F8087559 to F8087459 (one place)[41]
USB: Works
Fingerprint scanner: Unknown but detected by OS
Card Reader: Unknown but detected by OS
PCMCIA: Unknown but detected correctly by OS
Sleep: Not working (if you choice sleepenabler.kext remember to delete it since 10.6.5)

If you upgrade to 10.6.4 everything but the trackpad works (when you choice ApplePS2!!). So after upgrading plug in a usb mouse and open kexthelper and re-install ApplePS2. If VoodooPS2 no problems reported. No problems then upgrading to 10.6.5, 10.6.6 and 10.6.7 or directly to 10.6.7.

Mini 1000

QE

Follow the guide [42]
Everything working except: Sleep, Quartz Extreme. - QE works using iAtkos v2 Intel drivers
You cannot dual boot with windows - installed on Windows running mini with empty partition for MacOS using iAtkos v2 - it is dual boot

Pavillion DV2915nr

QE

Install Method: iAtkos S3 V2 (GUID Partition)
Bootloader = AsereBLN v1.1.9
Bootloader Options = Graphics Enabler
Patches = Utilized Pre Selected by default,Extra Directory, fakesmc, Disabler, EvoReboot,RTC
Drivers = AHCI SATA,VooDoo HDA,Apple PS/2,Battery,NTFS 3G
Intel Graphics Drivers = Intel EFI String and X3100
Network Drivers = Marvell Yukon 88E8001 and Broadcom for wireless with airport enabled.
Problems = Will not wake from sleep.

Parts	Device	Working	Notes
Processor	Intel Core2Duo T5550 1.83ghz	Yes	Works with both cores enabled.
SATA	Intel ICH8	Yes	Works OOTB
Graphics	Intel X3100	Yes Without QE Enabled	Works at 144MB, 1280x800 by selecting, Intel EFI string and x3100 from iAtkos.
Audio	HDA	YES	Selecting VooDoo HDA from iAtkos
Wireless	Broadcom 4311	Yes	Switched hardware mini PCI WiFi Intel 3945ABG to Mini PCI WiFi HP Broadcom 4311 and selected Broadcom from iAtkos
Ethernet	Marvell Yukon 88E8001b	Yes	Works with Marvell Yukon 88E8001 Selection from iAtkos.
USB	Intel Highspeed 2.0	Yes	OOTB
Trackpad	Alps Trackpad	Yes	Right and left click work tapping does not unless you delete the appleACPIPS2nub.kext from extra folder before installing VooDooPS2 0.9.8 pkg after iAtkos Installation.
Battery	Intergrated	Yes	Works with Battery selection from iAtkos (Note You will lose the battery icon after enabling the tapping on the ALPS touch pad, just reinstall the VooDooBattery. Kext 1.3.3 with kext helper and run Kext utility then reboot.
Webcam	Intergrated	Not Working	Will work with the right 3rd party app.

Envy 14 Beats Edition CTO

QE

My first attempt at an OSx86 machine
Install Method: iBoot Legacy + MultiBeast 3.9.0; Retail OSX Snow Leopard DVD 1.6.3
booting os with cpus=1 and busratio=8 or higher
Used two hard drives, one GPT with OSX, and the other MBR with Windows 7, which is why I think I couldn't ever boot without using the iBoot disc

Parts	Device	Working	Notes
Processor	Intel Core i7 2630QM 2.0GHz	Yes	cpus=1 busratio=8 or higher
SATA, chipset	Hitachi HTS727575A9E364	Yes
Graphics	AMD Radeon HD 6630m 1GB DDR3 - Intel HD 3000	No	Should work on Lion
Audio	IDT 92HD81B1X	No	Makes weird sounds each time i press a button
Wireless	Intel Centrino Ultimate-N 6300 AGN	No	So far there's no solution for this card
Ethernet	Atheros AR8151	Not sure	Have not tried it
Keyboard, trackpad	PS/2	Partially	ApplePS2 kext, keyboard working, trackpad working but no tapping/multitouch for now
Battery	Integrated	Yes	Out of box
Webcam	HP Webcam	No	Never bothered
CD/DVD	DVD Drive	Yes
USB		No	Not sure
Card Reader	SD-MS/Pro-MMC-XD Card Reader	No	Never bothered

Lenovo

IdeaPad Y530

Install Method: iAtkos S3v2
Install: PS/2 Voodoo kext, Voodoo audio kext, AppleHDA, Enabler, Laptop battery, Broadcom kext. 64-bit WORKS!!!

Intel Core 2 Duo P8370 / DDR2 3Gb 800MHz / Network: Broadcom BCM94311 All software works perfect (Logic Studio 9, Traktor, Starcraft & Call of Duty 4: Modern Warfare) and hardware (Camera, Bluetooth, FN shortcuts). Not tested: LAN, Modem, HDMI, D-Sub, Combo update. Problems: Sleep, Battery (it shows 9% only and bricks then the computer is on battry power and it's closed but then is connected it works perfect), TouchPad works without schroll and button on touch layer.

B550

QE

Install Method: iAtkos S3 v2
Install PS/2 Voodoo kext, Voodoo audio kext, NVenabler, Laptop battery, broadcom kexts.

Intel Celeron T3100 / DDR3 2g / Network: BroadCom System worked perfect: i play SC2, FlatOut 2, use Photoshop CS5, XBench 104 score, ableton live 7 - all work PERFECT as original mac. Wi-fi/Wired worked perfect. Disable sleep mode.(dont work) Combo update dont work.

C2D T6570/2g/210m: everything same as above but instead of NVenabler used Chameleon v2 RC5+GraphicEnabler.

Thinkpad T60

   * Install Method: Snow Leopard 10.6.3 iAntares v2.2 DVD (try emule-project.net) 
   * OS Version: 10.6.3
   * CPU: Intel Core Duo T2300 @ 1.66GHz
   * RAM: 2GB DDR2 (2x1GB)
   * Graphics: GMA950 Hardware ID 27a2(Working out of box but only 1024x768@32bit
   * Sound: Choose AD1981 driver (Working out of box but no control panel keys)
   * Wireless Network: Thinkpad 11a/b/g Wireless Lan mini PCI express Adapter IBM Part Number 40Y7026
   * With Atheros AR5212 Chipset Hardware ID 168c.1014 (Working with atherosfix kext from [43])
   * You can also download from here [44])
   * Keyboard/Trackpad: Working with ApplePS2 (no scroll bar yet).
   * Battery indicator: Working with Apple battery option
   * Untested items: Wired Network (appears working)
   * Additional Notes: FakeSMC installed. No chipset patches installed, sleep not working.

Thinkpad W510

QE

Install Method: Use iBoot + Retail DVD version 10.6.3 or newer
Download: kexts & bootloader
BootLoader: Chameleon RC4 AsereBLN 116 or 119 Variant
DSDT: Not Necessary, a lot of the usual DSDT hacks just work OOTB
Kernel: Vanilla 10.6.3 or 10.6.4
Kexts: fakesmc, VoodooPS2 (Keyboard + Mouse + Trackpad), IntelE1000e, NullCPUPowerManagement, VoodooHDA, VoodooBattery, IOAHCIBlockStorageInjector, OpenHaltRestart
Issue: Sleep doesn't work, Speedstep doesn't work (Runs at full speed), Built-In Wifi doesn't work.

Parts	Device	Working	Notes
Processor	Intel Core i5 520M or i7 720Q	Yes	Vanilla 10.6.3 or 10.6.4
SATA	Intel QM57	Yes	Works OOTB
Graphics	NVidia Quadro FX880M	Yes	QE & CI with "GraphicEnabler=Yes". External Display works too.
Audio	Built-IN HD Audio	Yes	VoodooHDA.kext
Wireless	Intel Advanced 6200 N	No	This option from lenovo doesn't work
Wireless	USB Wifi	Yes	Got a Mac Compatible USB Wifi and it works fine
Bluetooth	HP Integrated Module	Yes	Works OOTB
Ethernet	Intel 82577LM Gigabit	Yes	IntelE1000e.kext
USB EHCI & UHCI	Intel Chipset	Yes	Works OOTB
USB3	NEC Chipset	Yes	http://tonymacx86.blogspot.com/2010/11/usb-30-now-supported-in-mac-os-x.html
Trackpad	Built-In	Yes	VoodooPS2 works nicely and supports scrolling with two fingers

Thinkpad X60T (6363-AQ8)

QE

Retail Snow Leopard DVD Installation with a USB Key
AsereBLN 1.1.9 Bootloader (based on Chameleon 2RC4)
Unmodified /S/L/E (no dependancy issues)
Custom DSDT including : IOATAFamily Fix / Native SATA Support / Intel GMA950 Support (with QE/CI) / Brightness Control / SpeedStep (P-States, C-States) / HDA disabler / EHCI Fix ...
Sleep works perfectly
Everything is working except IrDa, PCMCIA and Modem
Compatible with any update

G450 14-in 2.2GHz Core 2 Duo

QE

Snow Leopard 10.6.1-10.6.2 Intel AMD made by Hazard update to 10.6.3

BootLoader: PC EFI 10.5
Processor Type: Intel Core 2 Duo Prosessor (Intel Centrino)
Processor Onboard: Core 2 Duo T6600 (2.2GHz, FSB 800 MHz, Cache 2 MB)
Chipset : Mobile Intel GM45 Express
Standard Memory : 2 GB DDR3 SDRAM PC3-8500
Hard Drive: Hard Drive 320 GB SATA
WiFi: Broadcom 802.1 b/g (Does not work) (I Use Optional external USB Wifi :Edimax EW-7318USg (Chipset Ralink rt73))
Ethernet: Broadcom Netlink (Doesn't work) (I Use Optional external Orginal Apple USB LAN : Apple USB Ethernet Adapter [45]
Bluetooth: Broadcom (Work Perfect)
Video: NVIDIA GeForce G210M working CI/QE full with full resolution 1366 x 768 and with VGA Out (External) (use : NviInject 0.22 + GraphicsEnabler)
Audio: Conexant CX20561 (Work Internal Speker or external ) but Doesn't Work Input Internal or External "Mic"
Card Reader: Realtek USB 2.0 Card Reader Driver (Work Perfect)
TimeMachine : Work

Step By Step update:

If NullCPUPM already installed, this step can be passed: Install Disabler for AppleIntelCPUPowerManagement.kext like NullCPUPM.kext [46] . installed in the extra folder, then reboot.
Remove SleepEnabler.kext when using it. because SleepEnabler.kext can cause kernel panic if the match with the latest kernel version.
Update, the software can be directly used to update or download the installer here[47]
Complete the update process immediately reboot.
Completed

G550

QE

Install method: iAtkos S3 v2
Bootloader Chameleon RC5
Processor Intel Celeron Dual Core T3500 @ 2.1Ghz
Graphics Intel 4500MHD using modded X3100 kext, resolution working, video playback not fully tested, youtube useless, must use arch=i386, 64 bit kernel boot doesnt load kext
SATA working
Heats as normally have to do like in Windows
Sound Coxenant HDA. Used VoodooHDA. Microphone untested but audio works (Delete AppleHDA kexts)
WiFi: Broadcom, working.
USB working .
Sleep doesnt work
Ethernet: Realtek RTL8168 external kext, just google it.

G560 Intel Pentium P6100 2GHz

QE

Install method: iAtkos S3 v2

Only booting up with cpus=2 busratio=20 Kernel flags.

Bootloader PC EFI 10.5
Processor Intel Pentium P6100
Graphics Nvidia 310M, fully working with QE and best resolution.Video output working. Used NviInject 0.22+ Graphic Enabler
Sound Intel HDA. Used VoodooHDA. Microphone doesn't working.
WiFi: Atheros, working.
Card reader: Realtek 2.0 USB: working.
TM working.
Ethernet: untested.
Firewire: untested.

G560 Core i3 350M 2x2.26GHz

QE

Install Method : iBoot + 10.6.3 retail (load with -x -v busratio=16)
CPU: Core i3 350M (is recognized with combo update to 10.6.5) 2x2.26GHz
SATA Hard Disk: (ICH Family) Yes Out of Box
SATA DVD+/-RW: (ICH Family) Yes Out of Box
Graphics: NVIDIA GeoForce 310M Yes (is recognized with update to 10.6.5 with 1366x768)
Audio: Yes Out of Box (internal speakers must be turned on in system preferences)
Wifi: Yes Out of Box
USB: USB 2.0 Yes Out of Box
Bluetooth: Yes Out of Box (take cheap USB)
eSata:
Ethernet: No
Trackpad: Yes Out of Box
Webcam: No
Sleep: No

first booting method is: load 10.6.3 retail DVD as image from external medium (HD or USB-flash) with iBoot and following parameters: -x -v busratio=17
booting only possible with iBoot disc in or thru GRUB

MSI

GX740

Install Method: iBoot-ATI-5xxx-3 + Snow Leopard 10.6.3 Retail DVD (Possible bootflags required -v -x busratio=17)
OS Version: 10.6.3
CPU: Intel Core i5 M430
RAM: 4GB DDR3 1067MHz (2x2GB)
Graphics: ATI 5870m (Working out of box but only 1024x768@32bit), still strugling to get it recognized properly
Sound: Realtek HD Working OOB
Wireless Network: Not Working
LAN: Working OOB
Keyboard/Trackpad: Working OOB.
Battery indicator: Working with Apple battery option
Upgrades: So far all attempts at upgrading to 10.6.4 or higher to fix the graphics have failed.

CR700X-023HU

Install Method: iATKOS S3 DVD (no bootflags required)
Bootloader: Chameleon v2 RC5
OS Version: 10.6.3
CPU: Intel Celeron Dual-Core T3000 @ 1,8Ghz
Chipset: NVIDIA MCP79
SATA/AHCI working OOB
RAM: 3GB DDR2 667MHz (1x2GB;1x1GB)
Graphics: NVIDIA GeForce 8200 M G, works at native resolution (1600x900@32bit) with GraphicsEnabler=Yes, QE/CI working
Sound: Realtek HD Audio works with VoodooHDA experimental, use kext provided here: [48] (crackling sound with default VoodooHDA, AppleHDA not working at all)
Wireless Network: Atheros AR9285 working with this kext: [49] , however unable to connect to 802.11n networks, even when AP is compatible (mixed bgn), you have to set the router to 802.11bg mode in order to connect (UPDATE: 7/01/2012 Found a workaround, if you have a Wifi-capable Android/iOS device, you can tether the phone's Wifi connection via USB with PdaNet, tried it and working with Samsung Galaxy S5660)
LAN: nForce LAN working OOB
Keyboard/Trackpad: Working with VoodooPS2, on the touchpad touch to click doesn't work
USB: Working OOB (USBBusFix=Yes), but when booting in verbose mode (-v switch) only pre-plugged keyboard/mouse work.
Battery indicator: Working with VoodooBattery.kext, but plugging/unplugging are detected with delay
Sleep working with SleepEnabler UPDATE: 7/1/2011 Installing VoodooBattery.kext breaks sleep, sometimes sleep fails( black screen), or after wakeup keyboard is stuck(?)
Webcam: BisonCam, NB Pro shows up in System Profiler but does not work.
Upgrades: Attempts to update to 10.6.8 with Combo Update resulted in kernel panic.

Samsung

N130

QE

Install Method: Mac Osx Snow Leopard DVD [IATKOS S3 v2]
Processor: Intel Atom N270
Audio: Realtek HDA, works fine with VoodooHDA 2.6.0
LAN: Realtek supported
Video: GMA 950 supported
Wifi: Atheros card recognized but cannot connect, replaced with a Dell 1510
Card Reader: OK
Webcam: OK
Trackpad: OK, multitouch scrolling OK
Sleep: OK, requires DSDT.aml.N310 and hibernatemode 0
VGA Out: OK, with DSDT.aml.N310

The N130 is just as compatible as the N310, very good bargain !

NPR480L

QE

Install Method: iBoot Supported + Mac Osx Snow Leopard DVD Retail + 10.6.3 Update + Multibeast
Chipset: Intel HM55
Processor: Intel Core i3 330m
Audio: Realtek HD
LAN: Not supported
Video: GeForce 310m
SATA & IDE: SATA work enabling AHCI in BIOS.
Have to disable Legacy Usb in BIOS.

Chameleon seems to not work. iBoot cd loads the installed OS. Usb work after patch. Vga tested whit vj soft and working perfect. Audio work. No LAN or WIFI. Webcam works. Bluetooth works.

R40

QE

Install Method: Mac OS X Snow Leopard DVD [IATKOS S3 v2]
Processor: Intel Core 2 Duo T5500
Audio: ATI SB4x0 [1002:437b]
LAN: Realtek RTL-8139 [10ec:8139]
Wifi: Atheros AR2413 [168c:001a]
Video: ATI Xpress 200M [1002:5a62] (no QE, but could set res to 1280x800).
SATA & IDE: ATI IXP SB400 [1002:4376]

Boot install dvd with arch=i386. Tick: - Bootloader Options - 32-bit boot - Drivers - Main Hardware - SATA/IDE - VIA SATA/IDE - Drivers - Main Hardware - PS/2 - Apple PS/2 - Drivers - Network - Wireless - Atheros

You end up with GFX 1024x768, no tapping in trackpad, audio crackling.

Trackpad fix: [50] Sound fix: [51] Video fix: [52]

Reboot and select 1200x800 in System Preferences - Displays

R530

QE

Install Method: Mac OS X Snow Leopard DVD [IATKOS S3] or [IATKOS S3 v2]
Processor: Intel Core 2 Duo
Audio: Realtek HD
LAN: Marvell Yukon Gigabit Adapter 88E804Y
Wifi: Atheros AR9285
Video: GeForce 310m (working with NVEnabler, works on 10.6.5 just with GraphicsEnabler, remove NVEnabler)
SATA & IDE: SATA work (ICH9)

When installing it does require fiddling with bios to allow (Possibly ACHI, i forget) to be set to 'always' not 'auto' as have run time errors. VGA/HDMI working (need to reboot with your screens connected. Audio works but with some problems with the internal mic, had to use this kext (http://drp.ly/1AcC5a) (but it screams and you need to go straight into System Preference>VoodooHDA and choose 2.Microphone, then drag monitor to zero but this is not the case with headphones inserted solution here: [53]). Wifi working (had to use IO80211Family from 10.6.5, [54] but this only tested with WPA but does not work with WPA2 personal security on wi-fi router). Webcam works. Complete package with necessary kext for this laptop available here: [55] SEE THE UPDATED PACKAGE IN THE 10.6.5 PAGE !

Toshiba

Satellite L310

Used iAtkos S3 V2 (10.6.3 Snow Leopard)
Chipset: GL960/GM965
Processor: Pentium Dual Core (1.73 Ghz)
Ethernet: Marvel Yukon (not compatible)
Wlan: Realtek RTL8187B (Haven't found a solution, if you found it, please post here)
GPU/Videocard: GMA X3100 (Use EFI String, ignore X3100 framebuffer and Natit) (QE/CI Working)
Used AHCI SATA
Webcam: Chicony USB 2MP Webcam (Works out of the box)
Sound: VoodooHDA
Inputs: VoodooPS/2
Select 32 bit boot in the Patch/Bootloader forgot
Not yet tested: Card Reader & Battery
Currently, if you insert the battery, it results in a kernel panic. (I installed without a battery)
Still not tested: Video output (last time, it resulted in a kernel panic)

Satellite A505-02F

QE

Install Method: Mac Osx Snow Leopard DVD Retail + 10.6.3 Update
BootLoader: Chameleon RC5
Chipset: GM45
Kernel: Vanilla 10.3.1
Processor: Core 2 Duo T6600
Audio: Realtek Intel HDA Compatible (VoodooHDA)
LAN: Built-in Realtek Ethernet (Use RealtekR1000 Drivers)
Wireless: Realtek Wi-fi RTL8191SE (Not Working)
Video: nVidia G210M (fully working QE/CI-VGA/HDMI Out)- after 10.6.3 update, put GraphicsEnabler=y in com.apple.Boot.plist.
Webcam: Detected but image capture doesn't work.
SATA & IDE: SATA work enabling AHCI in BIOS.
Trackpad:AppleACPIPS2Nub.kext, ApplePS2Controller.kext + PreferencePane.
Other Fixes: VoodooBattery.kext, arch=i386 in com.apple.Boot.plist

Satellite A305-S3857

Model No. PSAGOU-02701V Distro: iAtkos v7 10.5.7

Boot from DVD
Prepare the disk
Customize the Install

iAtkos v7 Main System Bootloader

Cameleon v2

X86 Patches

Left Defaults

Drivers

Under VGA I chose ATI as that is my chip
Under System -> PS/2/mouse/keyboard added Voodoo PS/2 Driver after much trouble with the

kb and mouse this worked

Under Network added Intel but there does not seem to be a wireless option for the intel

wireless driver, cannot get it to work yet will update if I do Install Sounds works out of box, with the additional drivers video works and so does the track pad
and the keyboard although I am having trouble with the network cards wired and wireless getting
them to work. Everything else seems to work fine. Tried a netgear wireless nic but no luck might
just be me doing something off.
~LordPardox

Satellite A200-AH7

Model No. PSAE0C-AH708C

Distro: iAtkos S3 V2

IN CUSTOM INSTALL, MAKE SURE THE FOLLOWING IS CHECKED:

iAtkos S3 Main System

Bootloader

Chameleon V2 RC4

Patches

Leave as is (No Changes)

Main Hardware

SATA/IDE: INTEL SATA/IDE
Sound: Voodoo HDA (See Issues below)
PS/2: Voodoo PS/2
CPU Power Manager: Voodoo P-State
Laptop Hardware: Battery, Card Reader, TSC Sync
VGA: INTEl, EFI String, GMA 950 27A1(32Bit), GMA 950 27AE(32Bit) (choose Both)
Network: Wired= INTEL PRO V100

Issues

System fan works sometimes, solution: just unplug Power adapter and plug it back in to make the fan work normally. Searching for a better solution...
Loud Feedback coming from speakers, seems to be due to the Microphone Gain volume stuck at full. Replace VoodooHDA.Kext with version 2.6.0 to resolve the issue.
Internal Wireless does not work. An external adapter may work.
Webcam does not seem to work although the Blue LED lights up near the lens.

SOFTWARE UPDATES

Updating to 10.6.4,10.6.5 and 10.6.6 (in that order) works successfully by downloading the combo updates from the official website.
Run "Permissions Repair" each time you update.
If keyboard & Track-pad stop working, just boot into safe-mode using -x
If sound stops working, it's most probably because the update placed a new AppleHDA.kext in the Kexts folder. Just delete it, perform a permissions repair and reboot.

Satellite A205-S5000

Install Method: iAtkos S3 V2
(NOTE: Keep all default options ticked and add the following for each hardware component.)
Bootloader: Chameleon 2.0 RC 4

Bootloader Options

32-bit boot

Patches

Modified kernels

quoopz 10.3.0

Sleep enabler

Drivers

Main Hardware

PS/2

Apple PS/2

CPU Power management

Voodoo P-State

Laptop hardware

Battery
Card reader
ACPI Thermal (32-bit)

VGA

Intel (Tick entire "Intel" section.)

Issues

Wifi does not work (Atheros AR5007EG)
Does not detect lid at first (manually sleep the computer then wake it, then lid starts working.)
When no cable is connected, Ethernet detects "Self assigned IP address", woks fine when connected.

Satellite L45-S7423

QE

Install Method: iAtkos S3 ver. 2 10.6.3
BootLoader: Chameleon RC5
Kernel: Vanilla 10.3.1
Processor: Core Duo 1,47 GHz
Video: Intel 965 (X3100 0x2a02) (fully working QE/CI-VGA)
Audio: Use VoodooHDA + PreferencePane
Ethernet: RTL8139
Wireless: RTL8187B (Disable USB Legacy in BIOS first to get it working)
Trackpad:AppleACPIPS2Nub.kext, ApplePS2Controller.kext + PreferencePane.

Suspend/Resume: Regular sleep doesn't work. System goes into a coma and will not wake up. One alternative is to use "safe sleep" which is really hibernate.

Satellite Pro L300-EZ1523

QE

Install Method: iAtkos S3
Bootloader: Chameleon v2 RC5
Install options: Kernel qoopz 10.3.0, Voodoo PS/2, VooDoo PState, VooDoo Power, NTFS-3G, Graphics Enabler, VGA Intel (all), USBBusFix, VooDoo PS2, VodoDoo HDA, Network Wired Realtek RTL8168 & RTL8139
Partitions: Linux Ubuntu 9.10 Ext4, Windows 7 NTFS, Data NTFS, Mac OS X
Chipset: ICH9
Processor: Intel(R) Core(TM)2 Duo CPU T5870 @ 2.00GHz
Video: Mobile Intel(R) GMA 4500MHD not working, 1024 x 768 instead of 1280 x 800, PCI\VEN_8086&DEV_2A42&SUBSYS_FF661179&REV_07, PCI\VEN_8086&DEV_2A43&SUBSYS_FF661179&REV_07
Display: Raster Res 1280 x 800, CD 32-bit, FontRes 96 dpi, Pix W/H 36 / 36, Pix Diag 51, Vert Refresh Rate 60 Hz, not working
Audio: High Definition Audio Device, working, HDAUDIO\FUNC_01&VEN_10EC&DEV_0268&SUBSYS_1179FF66&REV_1000, PCI\VEN_8086&DEV_293E&SUBSYS_FF661179&REV_03
LAN: Realtek PCIe FE Family Controller, not working, detected but DHCP/LAN not working, PCI\VEN_10EC&DEV_8136&SUBSYS_FF661179&REV_02
WLAN: Intel(R) WiFi Link 5100 AGN, not working, PCI\VEN_8086&DEV_4232&SUBSYS_12018086&REV_00
SATA: HDD & DVD Burner working
VooDoo PS/2 Mouse and Keyboard, working
Intel(R) ICH9 Family USB Universal Host Controller, working
Chicony USB 2.0 Camera ?, USB\VID_04F2&PID_B070&REV_0834

Satellite L635

QE

Install Method: Boot using ModCD, replace with iATKos s3 v2 (boot flag busratio=17), delete all kexts starting with ATI and reboot twice
Processor: Core i5 M430 (take note of boot flag)
Audio: Conexant CX20671, Voodoo
LAN: Atheros AR8152, Not working
Wireless: Broadcom BCM4313 (14e4:4727), Not working in the forseeable future
Video: ATI Mobility Radeon HD 5145, cannot load ATI driver, will result in screen with boxes, using VESA driver for now
SATA & IDE: Yes
USB: Working
Haven't tried sleep yet

L355-S7902, L355-S7907

QE

Install Method:iAtkos S3 w/ Windows 7 Dual Boot
Bootloader: Chameleon RC4 (This is IMPORTANT to get full video resolution with the method described below)
Chipset: ICH9
Processor:Intel T3400 Dual Core 2.16, T4200 Dual Core 2.0GHz
Audio: Model, List any patches used (including ones from the install DVD)
Edit: Used VooDooHda installed from iAtkos S3 DVD or get from here: [56]
LAN: Realtek drivers for these laptops can be downloaded and installed from: [57]
Wireless: I bought a Linksys WUSB600N wireless usb adapter which is in line with other devices on my network instead of using built in atheros wireless card. Driver download and instructions may be obtained from:
[58]
Video: Intel X4500M (Full resolution can be found here: [59]) No QE/CI
SATA & IDE: SATA works out the box
Be sure to select Apple PS/2 Mouse and Keyboard to get trackpad and keyboard working
DO NOT install anything related to USB as this causes kernel panic every time. Have had some issues with installing the battery meter fix from the disc, as it has caused my system to panic also, I just didn't install it. Basically Webcam and USB ports (for use with storage devices) will not work.
EDIT: For advanced users, USB issues can be fixed with EVOSX86 DSDTSE (comes installed with iAtkos S3 DVD in TOOLS folder) native USB Hack
adding <key>USBBusFix</key>, <string>Yes</string> lines in Infoplist section of com.apple.Boot.plist file. This should also get your built-in web cam working.

Satellite A105-S4384

QE

Install Method : iAtkos S3 V2 with Windows 7 dual boot
Bootloader: AsereBLN v1.1.9
Full screen resolution with : Graphics enabler, EFI string, Natit(32 bit), GMA950 27A2 and GMA950 27AE
Chipset : Intel Mobile 845GM Express, Intel Core 2 Duo T5500 / 1.66 GHz , 2 GB DDR2 RAM
Audio: Working with VoodooHDA kext
Keypad and Mouse : Voodoo PS/2
Wireless : Intel PRO wireless 3945ABG works with Mercurysquad beta kext [60], However only connects to unsecured networks.
Brought Airlink 101 Golden N USB WLAN adapter works with Airlink software
Battery : Voodoobattery giving Kernel Panic
SD card: did not used yet, but guess its not working.
SATA: Worked out of the box
Boot into windows works fine
Sleep option not working, tried SleepEnabler.kext however system goes into coma after sleep.

C655

QE

Install Method: iAtkos s3 Mac OS X 10.6.3
BootLoader: Chameleon RC4
Chipset: Mobile Intel GL40 Express
Kernel: Vanilla 10.3.1
Processor: Celeron 900 @ 2.20 GHz
Audio: ? (VoodooHDA)
LAN: ? (Not Working Yet)
Wireless: Realtek Wi-fi RTL8191SE (Not Working)
Video: Intel ? (1024x768 is the only option right now)
Webcam: None
SATA & IDE: SSATA only, works perfectly
Trackpad: Uses PS/2 drivers, but works perfectly
Other Fixes: None Yet

Sony

VAIO VGN-NR350FE

QE

Install Method: Iatkos S3 v2.
BootLoader: Chamaleon 4
Processor: Core 2 Duo T5550
LAN: Built-in Yukon Ethernet (Enable Yukon drivers)
Video: GM x3100 - Enable Efi Strings, GM3100 and Natit(not sure if necesary, no sleep trick needed)
Audio: OK, mic not tested
Keyboard and mouse Trackpad: (Enable PS/2)
Non working: CardBus Texas Instruments and wifi
Issues: Detects different resolutions 1280x768 - 1280x960, but not 1280x800

VAIO VGN-FW373J

QE

Install Method: Iatkos x.6.3 v2. Adjusts within Lizard tool.
BootLoader: Grub2 Linux Solution (update-grub to generate proper entries at boot ;D)
Processor: Core 2 Duo T8400
LAN: Built-in Yukon Ethernet (88E8036) working modifying /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleYukon.kext/Contents/Info.plist (replace 88E804A with 88E8036 and 0x436511ab with 0x435111ab)
Video: Radeon Mobility 3650 [No acceleration/ no QE]
Audio: Intel HDA, Sound Output OK, no mic entry (AzaliaAudio solution) [61] Within VoodooHDA solution, only shows HDMI-output and no-sound. Mic works. VoodooHDA
Keyboard and mouse Trackpad: [ApplePS2Controller]
Non working: CardBus (Texas Instruments PCIxxx12) and wifi (Intel 3945G)
Issues: About this Mac crashes (logout) but System Profiler works OK

VAIO VGN-FZ340E

Install Method: iATKOS S3 Default Settings
BootLoader: Chameleon C5
Audio: Voodoo; make sure to remove AppleHDA kext from "Extension"
Keyboard & Mouse: Voodoo
LAN: No clue please help me
Sleep: Doesn't work
Video: Not supporting but you can watch YouTube videos via Safari nay G. Chrome.
Webcam: Motion Eye not tested
Wireless: Intel Card isn't support; replace it.

Notes:
- amazingly stable no kernel panics/no freezing but gfx isn't supported.
- os x updates will require "npci=0x2000" but the OS becomes unstable with lags and kp.
- Graphics Enabler seems to gives me black screen
- enable maxed resolution add Graphics Mode=1280x800x32 com.apple.Boot.plist

VAIO VGN-SZ2M/B

QE

Install Method: Restored retail Mac OSX Snow Leopard with myHack into an USB hard disk
BootLoader: Chameleon installed with myHack
Processor: Core 2 Duo T2300
LAN: Built-in Yukon Ethernet (88E8036) working modifying /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleYukon.kext/Contents/Info.plist (replace 88E804A with 88E8036 and 0x436511ab with 0x435111ab)
Video: Intel GMA950 (Stamina mode, 64MB) using all this kexts. QE/CI works out of the box after update to 10.6.4
Video: NVIDIA 7400 Go (Speed mode, 256MB) following this tutorial and ATY_Init but only external monitor (all dual card VAIOs have this problem)
Audio: Intel HDA, working with VoodooHDA
Keyboard and Trackpad: VoodooPS2Controller
Battery: working with VoodooBattery (icon shown in tray)
Non working: CardBus (Texas Instruments PCIxxx12) and wifi (Intel 3945G)
Issues: About this Mac crashes (logout) but System Profiler works OK

VAIO VPCCW21FX/B

QE

Install Method: Iatkos s3 v2, Kernel qoopz
BootLoader: Chameleon v2 RC5
Processor: Core i3 330m
LAN: Built-in Yukon Ethernet, have a kext buy I'm not try
Video: NVidia 310 QE/CI works only external monitor
Audio: Intel HDA, working with VoodooHDA editing plist and add this <key>IOPCIPrimaryMatch</key> and this <string>0x3b568086</string>

after this <string>VoodooHDADevice</string>

Keyboard and Trackpad: VoodooPS2Controller
Battery: VoodooBattery
Non working: HDMI
Issues: About this Mac crashes (logout), just need install AppleSMBIOSEFI.kext and will be fine.

VAIO VPCF13C5E

Current OS X Version: 10.6.3
Install Methods summary: use iATKOS s3 (append cpus=8 busratio=12 flags)
Bootloader: Chameleon
Motherboard Manufacturer: SONY
Chipset: Havendale/Clarkdale PM55
BIOS Version: AMI R0180Y9
BIOS setup options: default
Video: nVidia GeForce GT 425M. Works out of the box?
Audio: NVIDIA HDA, Realtek HDA. Works out of the box?
LAN: Marvel Yukon 88E8057 Works out of the box?
SATA & IDE: Intel 5 Series 6 Port SATA AHCI. Works out of the box?
USB: Intel 5 Series/3400 USB 3.0 Works out of the box?
WLAN: Original Intel CM603 not working, replaced with Broadcom BCM4322AG, working one, OOB.
Bluetooth: Broadcom. Works out of the box? Yes
Touchpad: Alps pointing. Works out of the box? No
PCIe slot: Works out of the box? Yes, untested

Processor

Processor Model: Intel Core i5 M460
Speed: 2.53 GHz
Patches:

Video Card

What type of card: Integrated, PCIe, x16
Model: nVidia GeForce GT 425M
PCIID: 10DE:0DF0
Memory: 1024 MB
All resolutions available?
Patches:

Wired Card

Interface: Ethernet
Manufacturer: Marvel Yukon
Model: 88E8057
PCIID: 11AB:4380
Works?
Patches:

Wireless Card

Interface: IEEE802.11 a/b/g/n
Manufacturer: Broadcom
Model: 4322AG
PCIID: 14E4:432B
Works?
Patches:

Bluetooth

Interface: RFCOMM
Manufacturer: Broadcom
Model: 131072
PCIID:
Works?
Patches:

SATA Card

Interface: SATA
Manufacturer: Intel
Model: Series 6
PCIID: 8086:3B2F
Works?
Depend:

USB subsystem

Interface: EHCI/OHCI USB 3.0
Manufacturer: Intel
Model: 3400 Series
PCIID: 8086:3B34, 8086:3B3C
Works?
Patches:

Audio Card

Interface: Analog
Manufacturer: nVidia, Realtec
Model: ALC660
PCIID: 10DE:0014, 10EC:0275
Works?
Patches:

Other Accessories

Type: UVC Webcam
Interface: USB Integrated
Model: Motion EYE
Manufacturer: SONY
USBID: 064E:2100
Works?
Patches:

Other Accessories

Type: SD/MMC/MS Card reader
Interface: PCI
Model: SDA Standard
Manufacturer:
PCIID: 1180:E822
Works?

VAIO VPC-SB1C5E

Install Method: Nawcom Mod BootCD + Retail SL DVD 10.6.3
Processor: Core i5 2520m
LAN: Realtek
Video: Integrated + Radeon 6630m 1GB
Audio: Crakly
Keyboard and mouse Trackpad: (Enable PS/2)
Non working: intel wifi , USB 3.0
Issues: USB sometime (few) works
Update to 10.6.6 works

EPSON

NJ1000

QE

Install Method: Mac OSX Snow Leopard DVD Retail with Apple PKG Installer via another installation of osx (ex leopard)
BootLoader: MultiBeast(netkas PCEFI is only experimented by me!, other is failed)
Chipset: Radeon 200M
Kernel: Vanilla 10.3.0
Processor: Core 2 Duo T5500
LAN: Built-in Realtek Ethernet (RTL8139)
Video: Radeon 200M with Callisto kext
Audio:AD1981 (AppleAzaliaAudio, still not available headset, so ext. usb audio HY554(TFTEC USB-SHS) with AppleUSBAudioDevice is testing /w leopard,snowleopard fine)
SATA & IDE: AppleVIAATADriver (via usb with IDE2USB + GUID partition)
Trackpad:AppleACPIPS2Nub.kext, ApplePS2Controller.kext + PreferencePane.
Other Fixes:AppleSMBIOS.kext, NullCPUManagement.kext

Toolbox

23.22.252.150

HCL 10.6.3/Portables

Contents

Positivo

Positivo Z77

Acer

Aspire One Netbook

Installed

Bootloader

Patches Installed

Drivers

Setup Notes

Aspire 5810T

Aspire 6930g

Aspire 6935

Aspire 4320

Aspire 4570

Extensa 5620z

TravelMate 5730

Aspire 5920G

TravelMate 6292

Alienware

m17x R1

Asus

N50 VN

G60JX "Republic of Gamers"

A6KT "Total Gaming Power on the Go"

A6U

EeePC 1201N

G51JX - 3D "Republic of Gamers"

EeePC 1201N

eeePC X101H

EEE PC 1000HE

F5SL

N90sv

G72GX "Republic of Gamers"

Benq

JoyBook A52

Joybook S32B-LE16

Dell

Inspiron XPS 16 / 1645 (i7 version)

Inspiron 1420

Inspiron 1545

Inspiron e1705

Inspiron 6400

Latitude D420

Latitude E6400/E6500

Studio 1537

Vostro 1720

Vostro 3700 / 3xxx series with NVIDIA 330M

Inspiron 1525

Vostro 1320

Vostro 1500

Dell D620

Dell D630

Dell Precision M4500 (i7 version)

Fujitsu

A530

Gateway

T-Series Model W350i

ML6720

HP

Pavilion DV7-2173CL

Pavilion dv7-2250em

G62-237US

NX6325

EliteBook 8440p

NC4400

NC6400

NC6400

Mini 1000

Pavillion DV2915nr

Envy 14 Beats Edition CTO

Lenovo

IdeaPad Y530

B550

Thinkpad T60

Thinkpad W510

Thinkpad X60T (6363-AQ8)