HCL 10.6.7/Portables

From OSx86
(Difference between revisions)
Jump to: navigation, search
(NEC)
(Asus EeePC 1201N)
Line 30: Line 30:
 
* x86_64 kernel
 
* x86_64 kernel
 
* Hyperthreading
 
* Hyperthreading
 +
*[http://www.besttermpaper.com/ term papers]
 
* Sound works with patched VoodooHDA
 
* Sound works with patched VoodooHDA
 
* Mic Works
 
* Mic Works

Revision as of 17:43, 7 March 2012

Mac OS X 10.6.7
Hardware Compatibility

This is a hardware compatibility list for portable computers. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying a portable computer. Don't forget to add how you got OSx86 running on your portable x86 computer, and to use proper English. Please see the discussion page for proper instructions on how to input your system specs. Also, please contribute to the HCL 10.6.7 page, which should list a more granular view of compatibility. If your computer isn't listed, you should try it if you have a SSE2 or higher processor. Use vanilla kernel if it is supported.

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for 10.6.7 builds only.

Please list your computers in alphabetical order by manufacturer (Asus, Acer, Dell, HP, etc)

For how to edit the Wiki, please see this thread. Thank you!

Note: Please add whether your device supports QE, Quartz Extreme, graphics. Try playing a movie with Quicktime Player.

Contents

Asus

Asus EeePC 1000H

QE
Icon Y.png

Working guide (in German): [1] (translated to English: [2]. See original in German for commands in terminal, as Google Translator screws them a bit.)

What works:

  • Graphics @ 1024x600
  • Full GPU accleration (QuartzExtreme/CoreImage QE/CI)
  • Sound and mic
  • Camera
  • Battery indicator
  • Sleep/DeepSleep(hibernation)
  • Restart/shutdown
  • Bluetooth
  • Onboard ethernet
  • WiFi ( RT2860 worked with additional realtek drivers but now I swapped for an airport compatible card)

Asus EeePC 1201N

QE
Icon Y.png

First use Mosslack's guide or also try this tutorial (only if you got 2GB of RAM).

If you have Sleepenabler.kext, uninstall it from /Extras/Extensions folder and run kext-utility BEFORE INSTALLING 10.6.7 update. Install the Update, re-install AppleHDA.kext afterwards. To bring back Sleep-Mode, use SleepEnabler.kext from here. For 64Bit-Mode, use Teas binary patched Kernel from here.

What works:

  • x86_64 kernel
  • Hyperthreading
  • term papers
  • Sound works with patched VoodooHDA
  • Mic Works
  • Graphics @ 1366x768
  • Full GPU accleration (QuartzExtreme/CoreImage QE/CI)
  • 1080p playback
  • HDMI out works without sound... must use line out w/HDMI
  • Camera works
  • Battery indicator works
  • SD card reader works(AnyCardReader.kext)
  • Function Keys for Brightness, monitor on-off, Volume, etc` (IOWMIFamily.kext)
  • Trackpad works with multi-touch gestures
  • Sleep/DeepSleep(hibernation)
  • Restart/shutdown
  • Bluetooth (on/off with BroadcomAppleBluetooth.kext)
  • AHCI
  • Onboard ethernet
  • Netflix streaming (use latest version of Silverlight)

Not Working:

  • Onboard WiFi RTL8191SE
 Onboard Wifi card can be replaced by a Dell W1510 Half mini PCI-E card or a Realtek8191su USB dongle

Asus K50ID

QE
Icon N.png
  • BIOS : v218 > [3]>[4]
  • BIOS : v215 > [5]
  • Install Method : Empire EFI v1085 + DSDT + Retail MacOSX SL 10.6.3 (Apple Software Update)
  • OsX Version : 64bit 10.6.7. (10J869) Darwin 10.7.0
  • CPU : Intel® Core™2 Duo Processor T6500 (2M Cache, 2.10 GHz, 800 MHz FSB)
  • Graphic card : GeForce GT 320M CUDA VRAM: DDR3-1GB Works with DSDT.aml.
  • VGA : Works with DSDT.aml.
  • Audio: (Realtek ALC269) : Works with DSDT.aml + IOAudioFamily.kext + AppleHDA.kext + VoodooHDA.kext = all kext`s special for K50ID
  • Audio kext`s and more: [6]
  • LAN:(Realtek RTL8168D/8111D) : Works with IONetworkingFamily.kext(v1.9) <(myHack v1.1).
  • Wifi/WLAN: (Atheros AR9285) : Works with IO80211Family.kext(v3.1.2).
  • USB 2.0 EHCI (fix): Works with DSDT.aml > [7]
  • DVD-RW : Works.
  • HDMI+Audio : Works.
  • Web Cam : Works.
  • Card Reader: (Alcor AU6433) : Works. > [8]
  • Complete power off at shutdown : Not works.
  • Tutorial: [9]

Asus F9S Series

QE
Icon N.png
  • Install Method : USB 10.6 + DSDT + 10.6.7 (Apple Software Update)
  • OsX Version : 10.6.7. (10J869) Darwin 10.7.3
  • CPU : Intel Core Duo T7300 @ 2,0 GHz.4 Gigas RAM DDR2
  • Graphic card : nVidia GeForce8400m G.
  • DVD-RW : Works.
  • Audio : Works with Voodoo HD Audio 0.2.6.
  • LAN : Works
  • Web Cam : No works.
  • PCMCIA : Works.
  • Rest : Works
  • Tutorial: [10]

Asus N53SN and N73SV Series

QE
Icon N.png
  • Install Method : iBoot-Legacy + Retail 10.6 + Update 10.6.6 + Update Early MBP 10.6.7 + kexts
  • OsX Version : 10.6.7.
  • CPU : Intel Core i5 2410M @ 2,30 GHz. 4 GB DDR3 RAM
  • Graphic card : Intel HD Graphics 3000 (Work, full qe/ci with native resolution)
  • Graphic card : nVidia GeForce GT 550M (Not Work)
  • Audio : Realtek ALC269 (So noisy, we can say not work)(Work with Voodoo HDA 72 you most calibrate microphone)
  • Wireless : Atheros AR9285 (Work with AR9285 fix)
  • Bluetooth : Broadcom (Work)
  • Battery : Work with VoodooBattery.kext
  • TrackPad : Work
  • Rest : Not tested!
  • Tutorial: [11]

Acer

Acer Aspire 4720z

QE
Icon Y.png
  • Install Method : Boot Think 2.4.6 (installed on Windows) + Retail DVD + 10.6.7 (Apple Software Update)
  • OsX Version : Mac OS X 10.6.7 (10J869) Darwin 10.7.0
  • CPU : Intel Pentium Dual-Core T2390 1.86GHz recognized as Intel Core 2 Duo, the multiplier is elevated to 14.5 and work to 1.93 GHz
  • Keyboard/Trackpad : Basic Works (I'm not sure if is native support)
  • Graphic Card : GMA X3100 (Native support) but on i386 mode, on x86_64 don't work fine, external VGA Display port yes but S-Video port not work
  • Optical Drive : HL-DT-ST DVDRAM GSA-T40N (Native support)
  • Firewire: Apparently is working (Native support)
  • Bluetooth : Broadcom Internal BCM92045NMD and turn on/off button (Native support), also to is suported any USB Bluetooth device
  • LAN : Broadcom BCM5787 Works, needed additional kext
  • Wireless : Broadcom BCM94312MCG Works but is needed IOPCIFamily.kext because that not is detected the PCI interface without this and also is needed add the string PCI14e4,4315 into Apple airport Broadcom kext, turn-on/off button not works (only is off if is pressed), some times need Windows to turn-on the module.
  • Webcam : Acer CrystalEye webcam not works
  • Sound : Realtek ALC268 works using VoodooHDA
  • Card Reader : RICOH 5-in-1, needed additional kext, only work with SD & SDHC

Acer Aspire 5315

QE
Icon U.png
  • Current OS X Version: 10.6.7
  • Desktop/Laptop : Laptop
  • Manufacturer: Acer
  • Model: Aspire 5315 201G12Mi
  • Install Methods summary:

Used SnowLeo Mac OSX86 for Intel/AMD 32/64 Bit Install DVD (GPT/MBR) + Combo Update 10.6.7 + Legacy_kernel 10.7.0, mod com.apple.Boot.plist (Kernel Flags -force64 arch=i386, boot 64-bit mode)

  • BIOS Version: 1.45
  • BIOS setup options: Sata set to AHCI Mode
  • Processor Model: Intel Celeron M550 (2.0 GHz) Update Pentium Dual Core T2370 (1.73 GHz)
  • Audio: Realtek High Definition Audio (10EC:0268), works perfectly with ALC268 by Skvo (additional note---> [12] also worked for me)
  • LAN: Broadcom Netlink Fast Ethernet (14E4:1713), Work!!!
  • WLAN: Atheros AR5007EG Wireless Network Adapter (168C:001C), Not working, Not Supported. (replaced to BCM4390 Work out of box)
  • Modem: HDAudio Soft data fax Modem with smart cp (14F1:2C06), Untested as I dont need it.
  • SATA & IDE: SATA worked out of the box. IDE untested.
  • Partitoned as GUID
  • Graphics: Mobile Intel 965 Express Chipset Family X3100 144mb (8086:2A02) Working perfectly
  • Quartz Extreme : Supported, all resolutions available.
  • Other Accessories (USB/FIREWIRE) : Yes

Acer Aspire 5315 Core 2 Solo (Celeron processor)

QE
Icon U.png

Bios setup options: SATA set to IDE mode because Windows 7 doesn't works well with AHCI mode, constantly lockup UI while disk intensive operations Processor: Original Intel Celeron M550 WLAN: Replaced to GIGABYTE GN-WI01GT (Atheros 5424) MBR partition schema for dual booting

Installation:

SnowLeo Mac OSX86 for Intel/AMD 32/64 Bit Install DVD (GPT/MBR) md5: e602b18b2bef256a2261c8afe5a39141

Image content copied to USB pendrive (formatted as HFS+ without journal, bootable with latest Chameleon bootloader)

For successful installation:

  • Choose ApplePS2 for working keyboard
  • ACPIThermal for resolve overheating issue
  • VoodooHDA for sound card (ALC268)
  • Update to 10.6.7 with Combo updater from [13], before press restart, install Legacy_kernel Darwin 10.6.0 for 10.6.6 ([14])!
  • Install all updates
  • After updates delete AppleACPIPlatform.kext before reinstall it from SnowLeoDVD: /System/Installation/Packages/notebook/ACPIThermal.pkg (Show hidden path in Finder with navigate to SnowLeo DVD drive and open "Go" menu "Go to folder..." command, enter "System".)

Broadcom Netlink 14E4:1713 driver: [15]

VoodooHDA driver: [16] Use VoodooHDA.kext_261_Snow.zip - 2.72 doesn't works for me, working plist missing for ALC268 (Another driver "ALC268 by Skvo" not found, missing download link)

Sleep works, without sleepimage, so you can delete sleepimage with sudo pmset -a hibernatemode 0 sudo rm /var/vm/sleepimage

Everything works except TV/Video out and fax winmodem, Express Card not tested.

WiFi dropping problem with replaced GIGABYTE GN-WI01GT (Atheros 5424) Wlan Card (168C:E913) Solution:

  • Legacy_kernel Darwin 10.6.0 for 10.6.6 ([17])
  • Replace IO80211Family.kext extracted with Pacifist from 10.6.4 Combo update [18] with older firmware

(details: [19])

Acer 5630

QE
Icon U.png
  • Current OS X version: 10.6.7
  • Kernel: 10.7.0
  • Install method:

iAtkos S3 V2 brings 10.6.3, then Apple Combo Update 10.6.7 but before restarting, install legacy kernel 10.7.0, then restart.

  • Processor: Intel Core 2 Duo T5500 (1.67GHz)
  • Graphics: Intel GMA945 working at all resolitions and Quarts Extreme supported.
  • LAN: BCM440 not tested, but suposed to be working.
  • WLAN: Intel Pro wireless 3945 not working, changed to a BCM4311
  • keyboard and trackpad working with VooDooPS2.
  • AcerOrbicam not working.


Acer 5810T

QE
Icon N.png
  • Install Method : iATKOS S3 v2 (10.6.3) + 10.6.7 (Apple Software Update)
  • OsX Version : 10.6.7 - Kernel 10.6.0 (32Bits) - Chameleon by Deviato RC4 Bootloader.
  • CPU : Intel Core2Duo T7200 @ 2.06GHz - Dual Core Works with Voodoo TscSync.
  • Graphic card : Intel GMA4500HD - QE/CI works?.
  • DVD-RW : Works out of the box.
  • Rest : updating...

Acer 5820TG

QE
Icon Y.png
  • Install Method : ModCD 0.3 + Retail (10.6.3) + 10.6.7 (Apple Software Update)
  • OsX Version : 10.6.7 - Kernel 10.7.0 (64Bits) - Grub + Chameleon
  • CPU : Intel Intel Core i5-460M @ 2.5GHz
  • Graphic card : Hybrid Intel GMA + ATI Mobility Radeon - QE/CI if ATI is chosen (discrete in BIOS selection) follow [20]
  • DVD-RW : Works out of the box.
  • Audio : Intel HDA + ATI HDMI out. HDMI only listed in Voodoo HDA = Non working sound

Acer Aspire 5572ANWXMi

QE
Icon N.png
  • Install Method : Hazzard (10.6.2) + 10.6.7 (Apple Software Update)
  • OsX Version : 10.6.7.
  • CPU : Intel Core Duo T2250 @ 1,73 GHz.
  • Graphic card : Intel GMA950.
  • DVD-RW : Works out of the box.
  • Audio : Works with AppleHDA.
  • LAN : Marvel Yukon 88E8038 Works but modified IOPCIFamiliy.kext ([21])
  • Web Cam : Works.
  • PCMCIA : Works.
  • Rest : updating

Acer Aspire 5572ANWXCi

QE
Icon Y.png
  • Install Method : install win7 + newest Boot think first, then install mac os x 10.6 , and update to 10.6.7 .so i can use boot think to open win7 or mac
  • OsX Version : 10.6.7.
  • CPU : Intel Core Duo Processor T2250@1.83GHz
  • Main board : intel 945PM+ICH7-M , works after use 'Kext Helper b7' to install IOPCMCIAFamily.kext ,PCMCIA can work
  • Graphic card : nVIDIA GeForce Go 7300(351/351MHz),DDR2 128MB ,work after use 'Kext Helper b7' to install NVEnabler_64.kext ,ci/qe can be opened
  • Audio : Realtek ALC883 HD Audio ,Works after install VoodooHDA-2.7.2.pkg
  • Wireless : Intel PRO/Wireless 3945ABG , i try iwi3945abg.dmg test version, but it can't work
  • LAN : Marvell Yukon 88E8038 PCI-E hundred million ,I download IOPCMCIAFamily.kext install then reboot. intall IONetworkingFamily.kext which download .you can refence(Works but modified IOPCIFamiliy.kext ([22]))
  • other  :use 'Kext Helper b7' to intall PlatformUUID.kext ,OpenHaltRestart.pkg
  • contact :283784210@qq.com ,any one have Intel PRO/Wireless 3945ABG Wireless solution, remeber to send email to me ,thank you

Clevo

M860TU

QE
Icon Y.png
Parts Device Working Notes
Processor Intel Core 2 Duo T9400 Yes Out the Box
SATA Hard Disk/DVD-RW Yes Out the Box
Graphics nVidia GeForce 9800M GTS Yes Out of box
Audio HDA ALC662 Yes Patched AppleHDA
Wireless Intel WiFi 5100 AGN No Not working
USB ICH9M Family Yes Out the Box
Ethernet Realtek RTL8169 Yes Out Of Box
Battery Integrated Yes AppleACPIBatteryManager
FireWire Jmicron FireWire Yes Out the Box
Bluetooth Cambridge Silicon Radio Yes Out of box
Web Camera BisonCam, NB Pro Yes Out of box
Card Reader Jmicron Card Reader Mb yes VoodooSDHC (but i don't use it)

Not native kexts: AppleACPIBatteryManager, FakeSMC, VoodooPS2. (Install all kexts in S/L/E, not E/E directory)

  • Install 10.6.X or other SL version (doesn't matter) update to 10.6.6
  • Latest Chameleon version.
  • Use my full working Kit (DSDT, Plist's and other) Clevo M860TU Kit
  • Full working in 64-bit mode
  • Native SpeedStep, HPET,LPC,SBus and other full works
  • Geekbench: 4000, xBench: 220
  • Its guid works only with Clevo M860TU with nVidia GeForce 9800GTS. If you have some graphics card, you need to delete or correction GFX0 section in my DSDT or use GraphicsEnabler/NVEnabler

Warning: Update you BIOS to latest for chipset AHCI support.[23]

For other information contact with me, ZAFFE: pavel.kulyasov@gmail.com

update: 18.04.2011

Dell

Dell Vostro 1500

QE
Icon Y.png
  • Install Method : Empire EFI+ Retail DVD + 10.6.7 (Automatic updates)
  • OsX Version : 10.6.7 - Kernel 10.7.0 (64Bits) - Chameleon RC5 Bootloader + ChameleonPrefPanel.
  • CPU : Intel Core2Duo T5900 @ 2.20 GHz, 4 GB Ram
  • Graphic card : Nvidia 8400M GS - QE/CI work.
  • Optiarc DVD-RW : Works.
  • LAN : Broadcom 440X 10/100 - Works with applebcm440xethernet.kext.
  • Firewire : Works.
  • Keyboard/Trackpad (2 Finger Scrolling)/Multimedia front key : Works. 2 Finger for secondary click work with trackpad prefpane used in netbooks
  • Sound : Sigmatel 9200 : Works (VoodooHDA).
  • Wireless : Dell Broadcom Wireless 4311- works (native)
  • Bluetooth Dell 355 : Works (native)
  • RICOH 3 in 1 Card Reader : Works.
  • Power management : Nullcpupowermanagement
  • ShutDown/Reboot : Shutdown (when shuts fan still working, Reboot Works (with rebootfix string).
  • Kext/patch used : ChameleonRC5 (ifabio),GraphicsEnabler, Extra Directory, FakeSMC, VoodooHDA, VoodooPS2, VOODOO BATTERY, VOODOO SDHC, VOODOO, BMC440X

Dell XPS m1530

QE
Icon Y.png
  • Install Method : iatkos s3 v2 to 10.6.3 + combo update 10.6.7
  • OsX Version : 10.6.7 - Darwin 10.7.0 (64Bits) - Chameleon RC5 Bootloader.
  • CPU : Intel Core 2 Duo T8100 @ 2.1 GHz, 4 GB Ram, 800Mhz Bus
  • Graphic card : Nvidia GT8600 256MB - QE/CI works using GraphicsEnabler=yes and removing device string, NVIDIA kexts, and installing NVIDIA CUDA Update from NVIDIA website (don't know if this did anything but it can't hurt), HDMI + Audio works.
  • Bluray / DVD combo : Bluray works, installed Mac Blu ray player
  • LAN : Works with Marvell Kext from iatkos s3 v2
  • Keyboard/Trackpad : Works. Used Apple PS2 kexts.
  • Sound : Sigmatel : Works also with HDMI audio using modified VooDooHDA.kext and IOAudioFamily.kext. (select in iatkos and disable appleHDA)
  • Wireless : Broadcomm WiFi Works Perfect with iatkos Broadcomm kext.
  • Bluetooth : Works (native).
  • USB : USB Ports (all 2.0 works)
  • Webcam : Working.
  • Card Reader : Not tested.
  • ShutDown/Reboot : Working with EvoReboot.kext, and SleepEnabler.kext. Make sure it's the correct versions. Also it partially works. It also won't wake up from sleep (deep sleep). Also when shutdown or reboot, you have to hit the power button and hold it down. It'll merely "appear" off.
  • Kext/patch used : ChameleonRC5, used GraphicsEnabler=Yes, Extra Directory, FakeSMC, most default options except, GraphicsEnabler enabled, remove the device string to get qe/ci working and install CUDA.kext from NVIDIA's website. You can tell by preview working, and the ripple effect of adding widgets, and the translucent menu bar on top. Remember to use -x -v for safe mode verbose when troubleshooting and you inevitably get kernel panics. Also smVersion=0 will disable the SleepEnabler kext if you can't boot in with safe mode or single user mode! VooDooBattery.kext, and VooDooHDA.kext works as well. Remember to use Marvell Yukon kext for LAN and Broadcomm for Wifi. Get the right versions for 10.6.7 from www.kexts.com.

Dell XPS 17

QE
Icon Y.png
  • Install Method : nawcom Mod CD 0.3.1 and a 10.6.3 DVD or USB image + combo update 10.6.6 or 10.6.7
  • OsX Version : 10.6.7 - Kernel 10.7.0 (64Bits) - Chameleon RC5 Bootloader.
  • CPU : Intel i7 740QM @ 1.73 GHz, 6 GB Ram
  • Graphic card : Nvidia GT 445M 3GB - QE/CI work using Tonymac's nVidia update 2, HDMI + Audio works.
  • Bluray / DVD combo : CD/DVD works, Bluray untested.
  • LAN : Realtek RTL8168 - Works with Lnx2Mac's RTL81xx Driver.
  • Keyboard/Trackpad : Works. Used modified Apple PS2 kexts.
  • Sound : ALC 665 : Works also with HDMI audio using modified AppleHDA.kext and IOAudioFamily.kext.
  • Wireless : Intel WiFi Link 1000 BGN - does not work, no support.
  • Bluetooth : Works (native).
  • USB : USB Ports (all 2.0 and 3.0).
  • Webcam : Working.
  • Card Reader : Does not work.
  • ShutDown/Reboot : Working.
  • Kext/patch used : ChameleonRC5 (r699),Custom DSDT used GraphicsEnabler=no, Extra Directory, FakeSMC, modified AppleHDA.kext and IOAudioFamily.kext, modified ApplePS2, VOODOO BATTERY.

Please see guide @ [24]

  • Warning a lot of users are experiencing random freezes due to graphics card driver problems, see link above for more information and possible temporary fixes.

Dell Inspiron E1505

QE
Icon Y.png
  • Install Method : IATKOS S3 v2 + 10.6.7 Combo Update + MultiBeast
  • OSX Version : 10.6.7
  • CPU : Instel Core Duo 1.73Ghz - Works VoodooTSCSync
  • Graphics Card : ATI Radeon Mobility X1300 - Fully Works QE enabled Max Res.
  • Firewire : Works out of the Box
  • Keyboard/Trackpad : Works with VooDooPS2Controller + Trackpad
  • Sound : Sigmatel 2900 - Works VooDooHDA
  • Wireless : Broadcom 43xx a/b/g - Works
  • Card Reader : Works out of the box
  • PowerManagement : Works VooDoo
  • Graphics Method : Add VID 7149 to ATIRadeonX1000.kext, Install RadeonHD.kext. Fully works with correct resolution QE enabled and no artifacts.

Dell Inspiron 9400

QE
Icon Y.png
  • Install Method : iATKOS S3 v2 (10.6.3) + 10.6.7 (Combo update)
  • OsX Version : 10.6.7 - Kernel 10.6.0 (32Bits) - Chameleon RC4 Bootloader.
  • CPU : Intel Core2Duo T7200 @ 2.06GHz - Dual Core Works with Voodoo TscSync.
  • Graphic card : Nvidia GO 7900 GS - QE/CI work.
  • DVD-RW : Works out of the box.
  • LAN : Broadcom 440X 10/100 - Works out of the box with BMC440X kext.
  • Firewire : RICOH compliant IEEE 1394 @ 400 MHz - Works out of the box.
  • Keyboard/Trackpad (2 Finger Scrolling)/Multimedia front key : Works. 2 Finger for secondary click work with trackpad prefpane used in netbooks
  • Sound : Sigmatel 9200 : Works.
  • Wireless : Intel 3945 a/b/g - Doesn't work
  • Bluetooth : Works out of the box.
  • RICOH 3 in 1 Card Reader : Works.
  • Power management : Works
  • ShutDown/Reboot : Works.
  • Kext/patch used : ChameleonV2RC4, 32BIT-BOOT, GraphicEnabler, Extra Directory, FakeSMC, Disabler, Evoreboot, VoodooHDA, VoodooPS2, VOODOO-PSTATE, VOODOO BATTERY, VOODOO SDHC, VOODOO TSCSYNC, NTFS-3G, BMC440X

For more information, see [25]

Mini 10v

QE
Icon Y.png
  • Install Method : Mac Osx Snow Leopard 10.6.6 + Update Image 10.6.7 + Security Update 2011-002 via Software Update
    • download MacOSXUpd10.6.7.dmg from Apple Download site
    • run Netbookinstaller 20100616212351
    • run update package within MacOSXUpd10.6.7.dmg, do NOT reboot after installation is ready
    • run sudo rm -Rf delete /System/Library/Extensions/ATI* /System/Library/Extensions/GeForce* in order to get space on ramdisk for the next step, drivers are not needed at Dell mini 10v
    • run Netbookinstaller 20100616212351
    • reboot
    • run Software Update
    • apply all updates up to and including Security Update 2011-002
    • reboot and be happy
  • OsX Version : 10.6.7 - Chameleon 2 NBI Bootloader.
  • CPU : Intel® Atom N270 (1.6GHz/533Mhz FSB/512K L2Cache).
  • CPU : or Intel® Atom N280 (1.66GHz/533Mhz FSB/512K L2Cache).
  • Graphic card : Integrated Intel® 950 (Max Res 1024x600).
  • External VGA connector: Mirror display does NOT work; Extended Desktop works if mirroring is "OFF" (via terminal " mirror -off" or [26])
  • RAM : 1GB,DDR2,533MHZ. 2GB, DDR2, 533Mhz works too
  • Hard disk : 160GB SATA HDD 2.5 inch 5400RPM.
  • LAN : Realtek RTL8103EL-GR? - Works out of the box.
  • Keyboard/Trackpad : Works.
  • Sound : Intel High Definition Audio : Works.
  • Wireless : Dell 1397 WLAN 802.11g - Works.
  • Card Reader : Works.
  • USB Ports : Works.
  • Power management : Works
  • ShutDown/Reboot : Works.
  • Sleep : Works.
  • Kext used : All Kexts used are from Netbookinstaller 20100616212351

Dell D620

QE
Icon U.png
  • Install Method: MAC OSX 10.6.3 Retail DVD + Office Apple Update to 10.6.7
  • OS Version: 10.6.3
  • CPU: Intel Core2 Duo @ 2.06GHz
  • RAM: 2GB Dual Channel DDR2 SDRAM
  • Graphics: Nvidia
  • Max Screen: 1440 x 900
  • Sound: Sigmatel 9220
  • Wired Network: Broadcom
  • Wireless Network: Intel 3985 ABG not working
  • Keyboard/Trackpad: Works natively

Dell D630

QE
Icon U.png
  • Install Method: MAC OSX 10.6.3 Retail DVD + Office Apple Update to 10.6.7
  • OS Version: 10.6.7
  • CPU: Intel Core2 Duo @ 2.66GHz
  • RAM: 4GB Dual Channel DDR2 SDRAM
  • Graphics: Nvidia
  • Max Screen: 1440 x 900
  • Sound: Sigmatel 9205
  • Wired Network: Broadcom 5751 with modded kext
  • Wireless Network: Replaced with Dell 1395 broadcom wifi card added deviceid
  • Keyboard/Trackpad: Works natively
  • Shutdown/Sleep/Restart Works.

Dell D820

QE
Icon U.png
  • Install Method: MAC OSX 10.6.7
  • OS Version: 10.6.7
  • CPU: Intel Core2 Duo @ 2.66GHz
  • RAM: 2GB Dual Channel DDR2 SDRAM
  • Graphics: Nvidia
  • Max Screen: 1900x1200
  • Sound: kind of works
  • Wired Network: Doesn't work
  • Wireless Network: Doesn't work (USB Edimax micro card works out the box)
  • Keyboard/Trackpad: Works natively
  • Shutdown/Restart Works.

Dell Latitude E6400

QE
Icon Y.png

Installation Method:

Parts Device Working Notes
Processor Intel Core 2 Duo T9600 2.80GHz Yes with temperature fakesmc 3.1.0
SATA Hard Disk/DVD-RW (AHCI,MBR) Yes Native
Graphics nVidia 160M 256MB Yes Native
Audio IDT HD92xx Yes VoodooHDA, disable AppleHDA
Wireless WLAN 1397 802.11 a/b/g/N Yes Native
USB ICH9M Family Yes Native
Ethernet Intel 825xx Gigabit LAN Yes Intel82566M
Battery Integrated 9 Cell Yes VoodooBattery
FireWire Jmicron FireWire Yes Native
Bluetooth Dell 370 Bluetooth Minicard Yes DellBluetoothHCI
Web Camera Integrated Yes Native
Card Reader Jmicron Card Reader Yes (8GB SDHC tested) VoodooSDHC
DisplayPort&VideoPort Integrated Yes for HDMI Native
Trackpad Built-in Yes, but Multitouch/Scroll ApplePS2Controller with VoodooPS2Controller
Power Management Shutdown/Sleep/Restart Yes, but Hibernate DSDT with PM

Issues

  • problems with sound or KP at boot, need to delete AppleHDA.kext
  • sometimes need to fix files attributes with Kext Wizard, else KP at boot
  • if you will find problem with Bluetooth, try to reinstall DellBluetoothHCI.kext, reboot
  • when installing apple update 10.6.8, you will need to replace after update this two files: AppleACPIPlatform.kext and IOPCIFamily.kext from 10.6.7 and delete AppleHDA.kext in S/L/E
  • for apple update 10.6.8 you will need to have FakeSMC.kext v.3.1.0, included in archive above and Chameleon 2.0 RC5 rev.1078

Gateway

Tablet E-295C

QE
Icon Y.png
  • Install Method : iATKOS S3 V2 to start Disc Utilities, copy image from 1.83GHz 2008 intel MacBook hard drive. Used iBOOT+multi-beast to patch bootloader and a few other things. (will update when I get everyting working fully)
  • CPU : Intel Core 2 Duo T7100 (1.8GHz/800/1MB L2) shows in profile as 1.79GHz C2D.
  • Graphics card : Intel Integrated X3100/GM965 Graphics controller, switchable res, up to screen default. 1280x786.
  • VGA out : untested.
  • RAM : 4GB, DDR2, 667Mhz works, was in during install, may cause issues with iBoot, but that may have been 10.6.0 DVD.
  • HDD : 500GB SATA, Win7 on first partion and second partion #1 is system reserve for booting, never lost the install and this was where I made the Mac partion from, just left it raw ( unformatted ).
  • LAN : Gigabite Network Controller 82566MC intel - Works with kext found on the iATKOS DVD.
  • Keyboard/Mouse : works with PS2 patches, Voodoo or others, tried three, all worked.
  • Audio : ICH8 HD Audio - Works with Voodoo and another I forgot to take note of.
  • WiFi : Had to swap the card Intell 3945 ABG for an Apple Atheros, work now, but LED is always off even in Win7.
  • Card Reader : Not tested, not yet working as it is a Texas Insterment, I haven't been looking for the Kext yet.
  • Power/Battery : Not yet working, I am not good at the patching yet. (will update this when it is done)
  • ShutDown/Reboot : Working.
  • Tablet pen/Digitizer : Not workin, haven't started to fix it yet.
  • Kext/Patch : VoodooHDA, FakeSMC/updated, VoodooPS2

Gateway NV5378u

QE
Icon N.png
  • Install Method : Used Empire EFI for AMD to install a retail Snow Leopard 10.6.0, then used myHack to install bootloader. Installed 10.6.7 combo update, and installed 10.6.7 legacy kernel before reboot. Used this guide: 10.6.7 on a Gateway NV53
  • CPU : AMD Athlon II M320 (2.1GHz/800/2MB L2) shows in profile as 2.2Ghz C2D.
  • GPU : AMD Radeon HD 4200 GPU, proper resolution using Dong's framebuffer, up to screen native 1366x768.
  • VGA/HDMI out : Untested.
  • RAM : 4GB 667MHz DDR2 RAM, works properly as expected.
  • HDD : 500Gb SATA with all currently dedicated to OSX, works properly.
  • LAN : Broadcom Netlink Gigabit BCM5784M, needed modified BCM5722D kext, works properly with kext.
  • Wifi : Atheros AR928X works natively without patches, shows as Airport Extreme in profile.
  • Trackpad/Keyboard : Don't work after the 10.6.7 update. Install ApplePS2 for working keyboard and trackpad.
  • Audio : AMD HD audio, output works using AppleAzalia kext, but audio is choppy.
  • Card Reader : Realtek internal USB reader, works natively without patching.
  • Power/Battery : Works properly with VoodooBattery kext.
  • Shutdown/Reboot : Working properly.
  • Kexts/Patches : AppleAzaliaAudio, Dong's Radeon HD framebuffer, modified BCM5722D, Apple PS2, VoodooBattery, myHack, 10.6.7 legacy kernel. Drivers are included in this guide 10.6.7 on a Gateway NV53 as well.

HP

HP Pavilion G60-550CA

QE
Icon N.png
  • Installed using iAtkos s3 v2, default options, June 2011
  • Ran combo update and then Multibeast 3.6.0, then small fixes noted below
  • Using MBR with Windows 7, used EastBCD to add mac boot item, replaced nst_mac.iso with a renamed iBoot 3.04 iso for the latest Chameleon bootloader (not sure if it needs it or not)
Parts Device Working Notes
Processor Intel Core 2 Duo T6600 2.20 Ghz, 800 mhz fsb, 2mb cache Yes OOTB
SATA Hard Disk/DVD-RW Yes OOTB
Graphics Intel 4 Express Series GMA 4500 Partially Does native screen resolution (1366x768) with [28] QE/CI is apparently not possible with this chip.
Audio IDT High Definition Audio Yes After 10.6.7 and Multibeast
Wireless Realtek 8291Se No Not supported
USB G45 chipset Yes OOTB
Ethernet Realtek 8102E 10/100 LAN Yes Needs Realtek official installer, use [29].
Battery Integrated Probably? Have not yet tried
Bluetooth Broadcom No Have not yet tried
Web Camera HP Webcam Yes After 10.6.7 and Multibeast
Card Reader Jmicron Card Reader Yes After 10.6.7 and Multibeast

Other notes:

  • Not sure if sleep works
  • Function keys do appear to work
  • Had to install Voodoo PS/2 kexts for keyboard
  • Did not try to enable touchpad special functions
  • Did NOT have to use any special commands for the install (like cpus=1), which is rare for HP laptops!

HP Elitebook 8530w

QE
Icon Y.png
  • Install Method : iBoot-Legacy (April 2011) + Official Retail Snow Leo 10.6.3 DVD + 10.6.7 Combo Update
  • OsX Version : Mac OS X 10.6.7 Darwin 10.7.0
  • CPU : 2.79 GHz Intel Core 2 Duo
  • Memory : 4GB 667 MHz DDR2 SDRAM
  • Keyboard : Installed "VAIO-VGN-NW270" for a correct keyboard layout mapping (Needs swapping of the "ALT" and "Windows" key)
  • TrackPad : VoodooPS2
  • Graphic Card: Nvidia Quadro 770M - Native screen resolution (1680x1050)
  • Bluetooth : Native support, OOB
  • LAN : Native support, OOB
  • Wireless : No support - Intel Pro 5300 Wireless
  • Webcam : Yes
  • Sound : VoodooHDA 2.7.2 (Requires iGain to be set to 0 instead of 90)
  • Card Reader : Not tested
  • Battery : VoodooBattery 1.3.3 (Results in kernel panics when running on battery)

Warning: Sleep does not work. Energy savings need to be disabled.

Updated: 07-May-2011

NC4400

QE
Icon Y.png
  • Install Method: Snow Leopard 10.6.3 Vanilla + Combo Update 10.6.7
  • LONG and COMPLETE PROCEDURE here ===> Mini Guide NC6400/NC4400 (intel VGA version)
  • Bootloader = chameleon version 2.0 RC5m r1291 (by Slice)
  • Bootloader Options = 32bit boot
  • Patches = Extra Directory, fakesmc
  • Drivers = VoodooHDA, VoodooPS2, VoodooBattery


Parts Device Working Notes
Processor Intel Core2Duo T2500 Yes WORKS in Dual Core using Slice's modified bootloader as described on my "mini guide". Temperatures are normal 1 to 5 degress more than on MS.
SATA Intel ICH7 Yes Works OOTB
Graphics Intel GMA950 Yes Works using native kexts only after DSDT fix (downloadable from my guide)
Audio HDA Yes Works with VoodooHDA.kext 0.2.62 without issues
Wireless Broadcom BCM94311mcg Yes Works OOTB
Bluetooth HP Integrated Module Yes Works natively after DSDT fix (downloadable from my guide)
Ethernet Broadcom 5753M (Ven_14E4 DEV_16fd) Yes Works using a Kext modified with an HEX editor (downloadable from my guide)
PCMCIA TI PCIxx12 [104c:8039] Yes Works using modified IOPCMCIAFamily.kext + ApplePCCard16ATA.kext + ApplePCCardATA.kext (downloadable from my guide)
CARD READER TI 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b] NO! It's recognized, but no way to use!!!
FINGER PRINT AuthenTec Inc. AES2501A NO! It's recognized, but no way to use!!!
SLEEP & LID Internal Yes Works natively after DSDT fix (downloadable from my guide)
USB EHCI & UHCI Intel Chipset Yes Works natively after DSDT fix (downloadable from my guide)
Trackpad Synaptics Yes Tap to click and scroll wheel do not work. Update: 24/07/2011 With this fix [30]
Battery Intergrated Yes Works natively. The ICON using Voodoobattery but simetimes get KP. Still investigating!!!

Update directly to 10.6.7 without any panic. Eventually reinstall some kext following my GUIDE

NC6400

QE
Icon Y.png
  • Install Method: Snow Leopard 10.6.3 Vanilla + Combo Update 10.6.7
  • LONG and COMPLETE PROCEDURE here ===> Mini Guide NC6400/NC4400 (intel VGA version)
  • Bootloader = chameleon version 2.0 RC5m r1291 (by Slice)
  • Bootloader Options = 32bit boot
  • Patches = Extra Directory, fakesmc
  • Drivers = VoodooHDA, VoodooPS2, VoodooBattery


Parts Device Working Notes
Processor Intel Core2Duo T7200 Yes WORKS in Dual Core using Slice's modified bootloader as described on my "mini guide". Temperatures are normal 1 to 5 degress more than on MS.
SATA Intel ICH7 Yes Works OOTB
Graphics Intel GMA950 Yes Works using native kexts only after DSDT fix (downloadable from my guide)
Audio HDA Yes Works with VoodooHDA.kext 0.2.62 without issues
Wireless Broadcom BCM94311mcg Yes Works OOTB
Bluetooth HP Integrated Module Yes Works natively after DSDT fix (downloadable from my guide)
Ethernet Broadcom 5753M (Ven_14E4 DEV_16fd) Yes Works using a Kext modified with an HEX editor (downloadable from my guide)
PCMCIA TI PCIxx12 [104c:8039] Yes Works using modified IOPCMCIAFamily.kext + ApplePCCard16ATA.kext + ApplePCCardATA.kext (downloadable from my guide)
CARD READER TI 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b] NO! It's recognized, but no way to use!!!
FINGER PRINT AuthenTec Inc. AES2501A NO! It's recognized, but no way to use!!!
SLEEP & LID Internal Yes Works natively after DSDT fix (downloadable from my guide)
USB EHCI & UHCI Intel Chipset Yes Works natively after DSDT fix (downloadable from my guide)
Trackpad Synaptics Yes Tap to click and scroll wheel do not work. Update: 24/07/2011 With this fix [31]
Battery Intergrated Yes Works natively. The ICON using Voodoobattery but simetimes get KP. Still investigating!!!

Update directly to 10.6.7 without any panic. Eventually reinstall some kext following my GUIDE

HP ProBook 4520s

QE
Icon N.png
  • Install Method : iBoot-Legacy + Retail Snow Leo 10.6.0 DVD (single-layer) + 10.6.1 Update + 10.6.7 Combo Update
  • OsX Version : Mac OS X 10.6.7 Darwin 10.7.0
  • CPU : Intel Core i3 350M 2.26GHz recognized as Unknown 2.33 GHz
  • Keyboard/Trackpad : Works, but touchpad is not clickable. needs patching
  • Graphic Card : ATI RADEON HD 4350 - Not QE/CI yet, but I hope it will work
  • Bluetooth : Native support, OOB
  • LAN : Not tested
  • Wireless : works perfectly as airport
  • Webcam : Native support, OOB
  • Sound : There is the sound icon but there is no sound yet.
  • Card Reader : Not tested

For other information contact with me - stalker@nxt.ru

HP Pavilion DV6-2080es

QE
Icon Y.png
Parts Device Working Notes
Processor Intel Quad Core i7-720QM 1.60 Ghz Yes Needs busratio=12 flag on boot
SATA Hard Disk/DVD-RW Yes Needs AHCI kext
Graphics nVidia GeForce GT230M Yes Needs NAtit enabler. Native screen resolution (1366x768)
Audio IDT High Definition Audio Yes VoodooHDA kext. Mic works great. No sound manager (only on/off)
Wireless Intel WiFi 5100 AGN No Not supported
USB P55M Family Yes Needs USB kext (MultiBeast)
Ethernet Realtek Lan Yes Needs Realtek R1000 kext
Battery Integrated Yes VoodooBattery kext
3G Huawei K3765 Yes Vodafone Mobile Broadband for Mac
Bluetooth Broadcom Yes Native support
Web Camera HP Webcam Yes Native support (10.6.7)
Card Reader Jmicron Card Reader No Not installed. VoodooSDHC?

Not native kexts: AppleACPIBatteryManager, FakeSMC, VoodooPS2. (Install all kexts in S/L/E, not E/E directory)

  • Memory : 4GB 1333 MHz DDR3 SDRAM
  • Keyboard : No Fn keys working
  • TrackPad : VoodooPS2 kext
  • Installed with Hazard OSX 10.6.0 with 10.6.1 and 10.6.2 updates DVD. Busratio=12 and cpus=1 flags needed. Updated to 10.6.7. Note: Backup mach_kernel before updating and reinstall it after.
  • Using Chameleon RC4.
  • Using last Legacy Kernel.
  • SleepEnabler updated, but sleep does not work. Energy savings need to be disabled.

HP DV2423la

  • Install Method : iATKOS S3 V2 10.6 DVD + 10.6.7 Combo Update
  • OsX Version : Max OS X 10.6.7 Darwin 10.7.0
  • CPU : 1,73 GHz Intel Core Dio
  • Memory' : 2 GB 533 MHz DDR2 SDRAM
  • Keyboard : VoodooPS2Keyboard
  • TrackPad : VoodooPS2Mouse
  • Graphic Card': Intel GMA 950 Native screen resolution (1280x768)
  • Bluetooth : Not present, not tested
  • LAN : Not tested
  • Wireless : Broadcom driver
  • Sound : Voodoo driver. Working speakers, 2 headphone jacks (Headphones / SPDIF) working. Line in not tested.
  • Card Reader : Not tested
  • Battery : VoodooBattery

Warning: Sleep does not work. Energy savings need to be disabled.

HP DV1660ca

QE
Icon N.png
  • Install Method : D620SLV1.iso + Official Retail Snow Leo 10.6 DVD + 10.6.7 Combo Update
  • OsX Version : Mac OS X 10.6.7 Darwin 10.7.0
  • CPU : 1,66 GHz Intel Core Duo
  • Memory : 2GB 667 MHz DDR2 SDRAM
  • Keyboard : VoodooPS2Keyboard
  • TrackPad : VoodooPS2Mouse
  • Graphic Card: Intel GMA 950 Native screen resolution (1280x768) QE only work on 10.6 but not after update
  • Bluetooth : Native support, OOB
  • LAN : Intel100ProVE Fix
  • Wireless : No support - Intel 35945 Wireless (Using rtl8187l instead)
  • Sound : Conexant HD Audio.pkg - Sounds are only played on laptop speakers - Line-out/Headphones out is not working
  • Card Reader : Not tested
  • Battery : VoodooBattery

Warning: Sleep does not work. Energy savings need to be disabled.

Envy 14 Beats Edition CTO

QE
Icon N.png
  • Updated from a working 10.6.3 install
  • Install Method: iBoot Legacy + MultiBeast 3.9.0; Apple Official 10.6.7 Combo Update
  • booting os with cpus=1 and busratio=8 or higher
  • Used two hard drives, one GPT with OSX, and the other MBR with Windows 7, which is why I think I couldn't ever boot without using the iBoot disc
Parts Device Working Notes
Processor Intel Core i7 2630QM 2.0GHz Yes cpus=1 busratio=8 or higher
SATA, chipset Hitachi HTS727575A9E364 Yes
Graphics AMD Radeon HD 6630m 1GB DDR3 - Intel HD 3000 No Should work on Lion
Audio IDT 92HD81B1X No Makes weird sounds each time i press a button
Wireless Intel Centrino Ultimate-N 6300 AGN No So far there's no solution for this card
Ethernet Atheros AR8151 Not sure Have not tried it
Keyboard, trackpad PS/2 Partially ApplePS2 kext, keyboard working, trackpad working but no tapping/multitouch for now
Battery Integrated Yes Out of box
Webcam HP Webcam No Never bothered
CD/DVD DVD Drive Yes
USB No Not sure
Card Reader SD-MS/Pro-MMC-XD Card Reader No Never bothered

Lenovo

ThinkPad T60 (Model No. 2007-CTO)

QE
Icon Y.png
  • Install Method : Used Snow Leopard 10.6.6i for Intel SSE2/SSE3 By Hazard Install DVD with Combo Update 10.6.7
  • Processor Model : Intel Core Duo T2500 @ 2GHz 2MB L2 Cache 667MHz FSB
  • System Memory : 1GB DDR2 @ 667MHz
  • SATA : 60 GB 5400RPM SATA Works
  • Optical Drive : DVD/CD-RW Works
  • USB : Works OOB
  • Graphics : ATI Radeon X1300 64 MB (QE/CI Works)
  • Audio : ADI SoundMAX HD Audio Works
  • Ethernet : Intel PRO/1000 PL Gigabit Ethernet Works OOB
  • Wi-Fi : Intel PRO/Wireless 3945ABG Not Working
  • Bluetooth: Works OOB
  • Battery : VoodooBattery.kext
  • Misc : Shutdown and Restart works, sleep not working
  • PCMCIA:Seems not working
  • Installation Notes: Before Restarting after Combo Update finished I installed the legacy kernel for 10.6.7 (10.7.0) from nawcom. Modified ATIRadeonX1000.kext with Vendor ID 0x71491002. Mouse tearing when e.g. playing fullscreen video.

NEC

VERSA E6300

QE
Icon Y.png

iATKOS S3 install

Customization: -Default bootloader -32bit OS -sound vodoohda only -ps2 appleps2 only (keyboard/mouse dont work with voodoops2)

Everthying else unticked. (For example battery under laptop customization kernel panics the system if selected)

upgrade to 10.6.7 using combo update following instructions:

http://www.osx86.net/10-6-snow-leopard/13611-iatkos-s3-v2-10-6-3-10-6-7-all-machine.html

Download sleepenabler kext for 10.6.7 and install using kextwizard Download voodoobatter kext for 10.6.7 and install using kextwizard

With this configuration the following is working:

- Battery - Wireless - Graphics with Hardware Acceleration - Sleep (system sleeps but wakes up instantly, better than blacking out the screen and having to restart) - Sound - Bluetooth - Firewire is detected - USB 2.0 speeds

Overall excellent system to run hackintosh.

Samsung

R530-Jt02

QE
Icon Y.png

Installation: A special bootCD Designed for this laptop, made by the Team of hackintosh.nl Install with the CD, and after the installation run "Na installatie".

Processor: Core i3 330m Graphics: 310m Geforce, With Quartz Extreme Sound: Alc269 Network: Airport Atheros95x

Not (yet) Working. Lan and HDMI Audio.

You can find more information here: Xmove tutorial And Download the ISO Here: Here

Sony

VGN-NW21ZF

QE
Icon N.png
Parts Device Working Notes
Processor Intel Core 2 Duo P7450 2,1GHz Yes
SATA Hard Disk/DVD-RW Yes
Graphics ATI Mobility Radeon HD 4570 Partly Some QE functions work (Chess, Screen Saver), but Front Row doesn't work. No Green Mac Icon.
  1. Patched EDID: extracted EDID in Windows with Phoenix EDID Designer; used SwitchResX in OsX to determine DisplayVendorID and added IODisplayEDID to file 'DisplayProductID-717' with Plist Editor Pro (Guide).
  2. Patched AtiFramebuffer.kext (Shrike) with Custom Personality
  3. Used custom Chameleon build (boot) [32]
  4. added <key>PciRoot</key><string>1</string> and <key>Graphics Mode</key><string>1366x768x32</string> to com.apple.Boot.plist

Result: ATISupport.kext, ATIRadeonX2000 loaded, but not ATI4500Controller.kext or ATI4600Controller.kext. No 'Ati Radeon 4500 Mobility Series' in System-Profiler. (Same as this guy [33])


Current testing:

a) If I remove PciRoot, i get the flawky screen from [34]. Perhaps I have to change smbios.plist from MacBook5,1 to something else (Macbook Air?).
b) Or I have to patch ATI4600Controller.kext's Info.plist to <key>IOPCIMatch</key><string>0x95531002</string>


Testing #2: added ID to 4600'kext. No change. Boot with PciRoot=0 resulted in flawky screen. Re-Patched AtiFramebuffer -> black screen. Perhaps bootloader is not correct or personality still doesn't match.
Touchpad Yes AppleACPIPS2Nub.kext, VoodooPS2Controller.kext
Audio Realtek ALC 262 Yes VoodooHDA with <key>IOPCIPrimaryMatch</key><string>0x293e8086</string>
Wireless Intel Wifi Link 5100 AGN (Mini-PCIe) No Todo: BCM94311MCAG replacement
Ethernet Marvel Yukon 88E8039 ?
USB ICH9M Family Yes
Battery Integrated Yes VoodooBattery.kext
Bluetooth Cambridge Silicon Radio Yes
Web Camera ? Yes
Card Reader ? ? VoodooSDHC

Installation:

  1. Vanilla SL DVD with Nawcom ModCD 0.3.1 worked, iBoot didn't work (freeze at ioctl(_IOR, 'd', 79, 4) is unsupported).
  2. If OSX doesn't bootup (ATIRadeonX2000.kext kernel panic), try booting in Safe Mode (GraphicsEnabler=Yes -x)
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03)
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03)
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93)
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Unknown device [1002:9553]
01:00.1 Audio device [0403]: ATI Technologies Inc Unknown device [1002:aa38]
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. Unknown device [11ab:4380] (rev 10)
03:00.0 Network controller [0280]: Intel Corporation Unknown device [8086:4232]
0c:03.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05)
0c:03.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
0c:03.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)

Toshiba

Satellite A200-AH7

QE
Icon Y.png

Model No. PSAE0C-AH708C

Distro: iAtkos S3 V2 - 10.6.3, Updating to 10.6.4, 10.6.5, 10.6.6 and then to 10.6.7 works.

IN CUSTOM INSTALL, MAKE SURE THE FOLLOWING IS CHECKED:

iAtkos S3 Main System

Bootloader

  • Chameleon V2 RC4

Patches

  • Leave as is (No Changes)

Main Hardware

  • SATA/IDE: INTEL SATA/IDE
  • Sound: Voodoo HDA (See Issues below)
  • PS/2: Voodoo PS/2
  • CPU Power Manager: Voodoo P-State
  • Laptop Hardware: Battery, Card Reader, TSC Sync
  • VGA: INTEl, EFI String, GMA 950 27A1(32Bit), GMA 950 27AE(32Bit) (choose Both)
  • Network: Wired= INTEL PRO V100

Issues

  • System fan works sometimes, solution: just unplug Power adapter and plug it back in to make the fan work normally. Searching for a better solution...
  • Loud Feedback coming from speakers, seems to be due to the Microphone Gain volume stuck at full. Install VoodooHDA 2.7.2 Package, goto SystemPrefs, open VoodooHDA icon, and lower the GAIN to 0. Run Kext utility. If problem persists, edit voodoohda.kext and change gain # to 0 and imix to about 80%. Run Kext Utility.
  • Internal Wireless can work with only Unencrypted Networks. Linksys WUSB54G V4 is an external adapter and works.
  • Webcam will fully work if you download CamTwist. FaceTime, Skype, MSN, iChat all work if you open them, and then open CamTwist. Google has lots of more info.

SOFTWARE UPDATES

  • Updating from 10.6.6 to 10.6.7 works successfully by downloading the combo update from the official website.
  • Run "Repair Disk Permissions" each time you update.
  • If keyboard & Track-pad stop working, just boot into safe-mode using -x and the reboot normally.
  • If sound stops working, it's most probably because the update placed a new AppleHDA.kext in the (Extensions) Kexts folder. Just delete it, perform a Repair Disk Permissions and reboot.


Satellite M100-165

QE
Icon Y.png

Model No. PSMA1E

method: iAtkos S3 V2 - 10.6.3, used tutorial: http://osx86.transformnews.com/?p=45


Main Hardware

  • MOBO: Mobile Intel Calistoga i945PM.
  • Graphics adapter: Ati mobility radeon x1400 256mb (PCI ven 1002 dev 7145 ( QE/CI enabled, 1280×800)).
  • Lan:Intel pro/100 vm (pci ven 8086 dev 1093).
  • Audio: Realtek high definition audio ALC861 (ven 10EC dev 0861).
  • Wireless: Intel pro/wireless 3945ABG (pci ven 8086 dev 4222) (not working).
  • CPU:Intel core duo T2300 1.66 GHz 2MB L2 Cache, FSB 677MHz.
  • RAM: 3g pc6400 2+1 DDR 2 800MHz memory (usually this laptop comes with only 512Mb of RAM(pc4200), u should upgrade this for snowleo, mobo supports up to 4GB…).


Issues

  • Intel pro/wireless 3945ABG drivers not working. Alternative is to buy USB wireless or another mini pci wireless card.
  • intel pro/100 vm every now and than fails to connect to network.
  • sleep dont work *
  • system halts on start every now and than...


SOFTWARE UPDATES

  • Update to 10.6.7 combo causes problems with cursor, so after update, copy radeonHD.kext and ATIRadeonX1000.kext to System/Library/Extensions.
  • Run Kext Utility, restart.
Powered by MediaWiki © 2013 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers