This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.
| Hardware Name
|
Chipset
|
Notes
|
Patches
|
32/64bit working with patches
|
| 880G Pro3
|
AMD 880G / SB850
|
on board sound does not work, on board graphics does not support QE/CI -- use peripheral.
System Configuration:
- Motherboard: ASRock 880G Pro3
- BIOS: latest
- CPU: AMD Phenom II X4 955 BE 3.2GHz
- Video: ATI Radeon HD 5770 1GB GDDR5
- Audio: Turtle Beach Audio Advantage Amigo II USB
- RAM: CORSAIR Vengeance DDR3 1600MHz 8GB (2x4GB)
- HD: Crucial 64GB SSD
|
Nawcom Mod Boot CD+ Retail Snow Leo DVD with custom options legacy kernel, AppleATIATA, [no sleep, no graphics, lan or audio] ==> 10.6.8 Combo Update (install andy's kernel before reboot), Atheros L1cEthernet, chameleon w/bootflags "arch=i386 -force64" graphics enabler=y, andy's mach kernel
|
|
|
| A3M785GMH/128M
|
AMD 785G / SB710
|
not all works but still working on it
|
Kalyway AMD Patch 1
|
?
|
?
|
| AOD790GX/128M
|
AMD 790GX / SB750
|
Sleep does not work, everything else works fine. (OnBoard HD3300 native Screen, Resolution Settings are Limited no Video Support. Ethernet, SATA, USB & Sound (Voodoo HDA) Worked out of the Box
System Configuration:
- Motherboard: ASRock AOD790GX/128M (MacOsX shows as 2.79GHz Quad-Core Intel Xeon)
- BIOS: latest
- CPU: AMD Phenom II x2 550 @ AMD Phenom II x4 B50 (Bios UnLocked Cores 100% Stable)
- Video: OnBoard ATI Radeon HD3300 512MB DVI
- RAM: G.Skill DDR2 800MHz 4GB (2x2GB), Kingston DDR2 800MHz 1GB (Mac OS X shows as DDR2 200MHz)
- HD: Samsung HD502HJ 500GB
|
Legacy Kernel 10.8, AMD Binaries (dyld cache und libsystemB.dyld +Xcode dylds), -force64, Nawcom Mod Boot CD+ Retail Snow Leo DVD + 10.6.8 Combo Update
|
|
|
| X58 Extreme
|
Intel X58
|
Sleep does not work and often restarts instead of shutting down. Everything else works fine.
|
Ethernet RTL81XX, AppleHDA Rollback + ALC8XXHDA. SATA working OOB, as well as graphics (installed with iBoot method)
|
|
|
| H61M-VS
|
Intel H61
|
Finder behaves erratically after wake-up from sleep. Onboard Audio and Integrated Graphics not tested. Everything else works fine.
System Configuration:
- Pentium G620
- 2 x 4GB 1333MHz DDR3 (Apacer 78.B1GDE.9LZ0C)
- Nvidia 8800GT 512MB
- Intel 320 40GB SSD
- WD15EARS HDD
- E-MU 0202 USB Audio Interface
|
MyHack 2.0 RC1, AtherosL1cEthernet.kext
|
Yes
|
?
|
| G31M-S R2.0
|
Intel G31
|
Sleep does not work, everything else works fine.
|
Ethernet RTL81XX, Voodoo HDA 0.2.1 (Tutorial: http://www.youtube.com/watch?v=MgtvSmo2O-4)
|
|
|
| Extreme3 Gen3 Z68
|
Z68
|
Built from Retail OS 10.6.0 disk + iBoot. Had issues booting to install. ended up using -v -x GraphicsEnabler=No PciRoot=1 (Had a HD6850 during install). Sleep does not work.
|
EasyBeast [Realtek ALC8xxHDA / AppleHDA RollBack/ Non-DSDT 892] [Network - Realtek gig ethernet 2.0.6] [Chimera boot loader][boot flags used in install step was added to boot options in multibeast. Used standard multi-update to 10.6.8.
|
?
|
|
| Hardware Name
|
Chipset
|
Notes
|
Patches Used
|
32/64bit working with patches
|
| ASUS M4A88T-V EVO/USB3
|
AMD 880G / AMD SB710
|
System Configuration
- Audio: Realtek ALC892 with AppleAzailaAudio.kext
- LAN: Realtek 8111E Gigabit Ethernet, Use "Autodetected Wired LAN Support" from ModCD during install)
- SATA: Works fine without any patches in AHCI mode.
- IDE: Untested.
- USB: Works OOTB.
- Optical Drive: 2X SATA DVD±RW drives work perfectly. (1 LG (Lightscribe untested) and 1 Sony Optiarc)
- Rosewill 2.5" internal USB Card Reader, works perfectly.
- Shutdown and reboot work; however, I haven't made any effort to get sleep working.
- CPU: AMD Athlon II x4 640 (3000mhz stock) overclocked STABLE to 3750Mhz.
- Video Card: XFX ATI Radeon 5670 1GB with 1 DVI Monitor 1920x1080@32 CE/QI works with ATY_Init.
- RAM: 12GB DDR3 1333Mhz (2x2, 2x4)
- OS: 10.6.8
- Bootloader: Chameleon RC4
Installation
- Install with ModCD/USB + 10.6.3 retail disc .
- Reboot with ModCD/USB.
- Install 10.6.8 Combo Update + Install 10.8.0 Legacy Kernel.
- Reboot with -force64 -v and optionally install amd_insn_patcher.
- Enjoy!
|
Kexts/Patches
|
Yes
|
Yes
|
| Rampage Formular
|
Intel X48 / Intel ICH9R
|
System Configuration:
Install Method: iATKOS S3 v2 (10.6.3)
- Motherboard: Asus Rampage Formular
- BIOS: Rampage Formula 1001
- CPU: Intel E8400 3,0 GHz
- Video: ATI Radeon HD5450 512MB DDR3, VGA, DVI, HDMI, lite retail (11166-01-20R) works fully after Combo Update -> 10.6.8
- RAM: Corsair DDR2 4GB (2x2GB) TWIN2X4096-6400C4DHX
- HD: Samsung Spinpoint 750GB
Components Status:
- Audio - (SupremeFX II / AD1988B) (deselect both Audio Options / Kernel Panic) -> HDEF and AD1988B patches to DSDT + AD1988BFix.kext
- Ethernet - Select (Marvell Yukon Gigabit 88E8056 )
- USB 2.0 - Native Support
- IDE - Select JMicron SATA/IDE
- CPU - Speedstep -> Select (Voodo Power not -> Voodo P-State -> Kernel Panic)
- Firewire: Native Support
- SATA 3GB - Native Support
- Video - Graphics Enabler= no / ATI Activator= no / no additional selection under iATKOS S3 v2 / full resolution 1920 x 1200 / VGA & HDMI Dual Screen
- Keyboard - if PS2 -> Spacebar Start - Select -> Voodo PS/2
Post Install:
- Combo Update Mac OS X 10.6.8 v1.1 [1]
- After Update an *halt* may occur , start with -x -v , afterwards no further problems
|
|
|
|
| P5W DH Deluxe
|
Intel 975X Intel ICH7R
|
System Configuration:
- Intel E6400 CPU 2,13 GHz @ Overclocking 2,67 GHz, FSB 1333 Mhz, BUS 333 Mhz
- ATI Radeon™ X1800XT (256MB DDR3 256Bit) works fully with PCI-E/ATI
- Kit DDR2 4GB (4x1) 834 MHz Ram OCZ Platinum Rev.2 Timing 4-4-4-15
- Install Method: RETAIL Disk Image (USB Image) boot_Private ((( KEXT-GUIDE ))) edited by PIEROF81
Components Status:
- Audio ALC882M Stereo L+R - Line-Out x3 24bit, Line-In x1 20bit, Integrated microphone x1 20bit, Headphones Integrated x1 24bit, S/PDIF out x1 32bit
- Ethernet - Native Works (Marvell Yukon Gigabit)
- Wireless RTL8187 b/g - 32bit Works (Native Patch REALTEK) (64bit Work Kext Mod PIEROF81)
- USB 2.0 - Native all Work
- USB 3.0 PCIe (LACIE) - Native all Work SUPER SPEED
- IDE - Natine all Work
- E-SATA 3GB - Natine all Work
- Shutdown/Reboot - Work (Stop Work_Kext SleepEnabler x64)
|
Patches
Tools Link
|
|
|
| P5B
|
P965+ICH8
|
use Retail 10.6.3 with iBoot+MultiBeast, dsdt.aml, NV8400GS (old one), LAN onboard works, Sound alc1988b not work (use external USB). Upgrade 10.6.7 with ComboUpdate and direct update to 10.6.8 from Apple.
|
|
|
|
| P5K Premium/WiFi-AP
|
P35/ICH9R
|
- Intel Q9400 CPU 2.66 GHz @ 3.66 GHz
- 8400GS (256MB) works fully with GraphicsEnabler=y.
- 2x2GB 800 MHz Ram
- Audio - works with the latest Voodoo (Output and Inputs)
- Ethernet - Works
- Wireless b/g - Works (see patches column)
- USB - All Work
- IDE - ?
- ICH9R - Works
- Install Method: Retail Disk Image boot with myHack then Apple Software Update to 10.6.8
- Shutdown/Reboot work 99.9% of the time.
|
Patches
Useful Tools
|
|
|
| P5KPL-AM/EPU
|
G31 / ICH7
|
System IMAC-PEO-EDITION:
- Asus P5KPL-AM/EPU
- Nvidia GT 220 1024 GDDR2
- Intel QuadCore Q9400
- Muskin DDR2 800MHz 4GB
Install:
- iBoot with retail SnowOSX_Universal_10.6(432)GM-v3.5 DVD
- Boot system with iBoot, insert dvd and press f5
- When install,click customize and deselect all
- update with 10.6.8 combo updater (don't reboot)
- after many kernel panic, i prefer replace AppleACPIPlatform and IOPCIFamily from snow leopard 10.6.7
- At this point i try and retry update install but at reboot result is: dsmos.kext kernel panic.
remove this kext (if you have) before reboot and after run Multibeast.
- Multi Beast 3.9.1-> EasyBeast Install, UserDST Install, System Utilities and other customized
- kexts with KextBeast: AttansicL1eEthernet, Latest VoodooHda, SleepEnabler for 10.6.8
- Access Icloud follow this post http://www.insanelymac.com/forum/index.php?showtopic=263794&st=0&p=1725710&#entry1725710 and it work! :)))
- If you have any kernel panic, try with -x -v npci=0x2000 flag, and if you have problem with graphic with quote GraphicsEnabler=Y,
and again if you have a generic problem try DSDT=No (after Multibeast :) )
- Ethernet: works
- Audio: works
- Video: with Nvidia Driver for 10.6.8
- Sleep: works
|
|
|
|
| P5KPL-AM EPU
|
G31 / ICH7
|
System:
- Asus P5KPL-AM EPU
- Asus EN8400GS
- Intel E6700 DualCore 3.2GHz
- Corsair DDR2 800MHz 4GB Kit
Install:
- iBoot with retail 10.6.0 (on USB HD)
- Boot system with iBoot
- update with 10.6.8 combo updater (don't reboot)
- Multi Beast -> EasyBeast Install, UserDST Install, 64-bit Apple Boot Screen
- kexts: AttansicL1eEthernet, VT1705 (works fine with VT1708), SleepEnabler for 10.6.8
- Ethernet: works
- Audio: works
- Video: works
- Sleep: works
|
AttansicL1eEthernet
VT1705
SleepEnabler 10.6.8
|
|
|
| P5Q SE2
|
P45
|
System: ASUS P5Q SE2, NVIDIA Geforce 8800GT 512mb,
Intel Core 2 Quad Q8300, 6GB RAM, 500GB WDC
- Install retail Mac OS X 10.6 with IBoot
- download & Install MultiBeast
- download OSX Combo update
- Install Mac OSX combo update 10.6.8
- Ethernet: Works
- Audio: Works with VoodooHDA
Video: Works
|
VoodooHDA
|
|
|
| P5Q SE2
|
P45
|
System: ASUS P5Q SE2, NVIDIA Geforce 8500GT 512mb,
Intel Core 2 Duo E8500 3.16Ghz, 4GB Samsung RAM, 500GB WDC
- Install retail Mac OS X 10.6.3 with IBoot
- download & Install MultiBeast
- download OSX Combo update
- Install Mac OSX combo update 10.6.8
- Ethernet: Works
- Audio: Integrated audio works with VoodooHDA
- External M-Audio Fast Track USB works without any issues
Video: Works
|
VoodooHDA
External M-Audio Fast Track USB works without any issues
|
|
|
| [2]
|
G45/ICH10R
|
System: ASUS P5-VM, AMD Sapphire 5670 1GB,
Intel Core 2 Quad Q6600, 8GB RAM, 320GB Seagate w/2 more SATA drives
- iAtkos s3 10.6.3 disk
- Boot in safe mode w/verbose just to see what's going on (-x -v)
- download OSX Combo update
- Install Mac OSX combo update 10.6.8 to enable 5670 without injectors/hacks/etc.
- Ethernet: patched from DVD with 8168 kext.
- Audio: Requires AppleHDA_ALC1200_HDEF.zip patch [from Forum].
|
Ethernet RTL8186.kext from iAtkosDVD / AppleHDA_ALC1200_HDEF.zip patch [from Forum]
|
|
|
| P5N-E SLI
|
nForce 650i SLI
|
- Intel Core 2 Quad Q6600
- IDE DRIVE & IDE DVD-RW
- 6GB RAM
- Nvidia GeForce 9400 GT
Follow this guide
|
|
|
?
|
| P6T Deluxe V2
|
X58/ICH10R
|
System: ASUS P6T Deluxe V2, Intel Core i7-920, 2.66 GHz, 6gb Kingston HyperX
- SATA - Works with AHCI set in BIOS
- USB - Works
- Ethernet: Works
- Audio works after you run Audio patcher for SL 10.6.8 & Lion GM (follow guide)
- Video Palit Gtx 285 (1024MB) DDR3 - Works
|
Guide
|
|
|
| P75KPL-VM
|
Intel G31/ICH7
|
System: Intel E2180, 4 GB RAM, 500GB Seagate HD SATA, GeForce 8400GS 256MB
Installation: iBoot (3.1.0) + Multibeast (3.7.3). Installed from the original Snow Leopard 10.6.3 DVD and then upgraded (via ComboUpdate) to 10.6.7. then update 10.6.8 by Software Update
|
Patches applied via Multibeast:
NVEnable
|
|
|
| P7H55D-M EVO
|
Intel H55
|
System: Intel Core i5-650, 4 GB RAM, 2 x 500GB Seagate HD SATA, GeForce GT 9500 1 GB
Installation: iBoot (3.1.0) + Multibeast (3.7.3). Installed from the original Snow Leopard 10.6.0 DVD(Retail 10.6.3 also works) and then upgraded (via ComboUpdate) to 10.6.8. Multibeast: used the EasyBeast Install and applied the patches. No custom DSDT used. Additionally you may install Nvidia Retail Drivers. Monitor connected via DVI.
Video: Out of the box
Audio: VoodooHDA 0.2.72 (microphone not working)
Ethernet: Lnx2Mac's RealtekRTL81xx
USB: Out of the box
SATA/IDE: Out of the box
|
Patches applied via Multibeast:
VoodooHDA 0.2.72
Lnx2Mac's RealtekRTL81xx
|
|
|
| P7P55-LX
|
P55
|
- Intel Core i5-750 2.66 Ghz
- SATA HD 1 TB (switched on AHCI configuration from IDE) and SATA SONY DVD-RW DL
- 2x2GB (4GB) RAM Corsair Dominator XMS3 1600 Mhz
- Sapphire Ati Radeon HD 5770 1 GB Vapor-x
Install Mac with iAtkos S3 v2 with this configuration:
Important: If the iAtkos installer crashes on start, start the pc using the iAtkos DVD and press F8, write this -v cpus=1 busratio=20, it will work.
- 1) Chameleon RC4 bootloader
- 2) Boot with 32-bit mode
- 3) DON'T USE Graphic Enabler for now.
- 4) In Bootloader options --> USB check all.
- 5) In the same menu check Ethernet too and, if you want, check Legacy Logo (you will have the original Apple Logo when booting)
- 6) In Patches menu don't touch anything. Don't use modified kernels or USB fixes.
- 7) In Drivers menu check only Main Hardware --> Sound --> Both drivers (Vodoo and Apple). If you use PS/2 keyboard or mouse, check PS/2 too.
- 8) Don't touch VGA for now.
- 9) In network choose Wired (if you're connecting with Ethernet) and select Realtek --> RTL8168.
- 10) In Language Translations choose your language.
- 11) Install all.
- 12) Reboot and log on the OS. If MacOS come up with an error and you need to restart the computer, still use -v cpus=1 busratio=20 for every boot.
- 13) To install VGA drivers, download Kext Helper v0.7 (this is the last version for now) and download ATI 5000 Series drivers 32-bit from www.kext.com. Use Kext Helper to install all the content from the ATI 5000 Series driver directory.
- 14) Install Apple Combo Update to get 1.6.8 version.
- 15) Enjoy your system.
With this configuration all works: VGA, USB and internet connection.
|
|
|
?
|
| P7P55D-E LX
|
P55
|
Core i3 530 and ATI HD4670 graphics
- full installation proccess is here [3]
|
|
|
|
| P7P55D-E PRO
|
P55
|
I used Retail 10.6.0 with iBoot with PCIRootUID=1 at start. It is a Core i7 870, and a friend gave me an Apple GT 120 video card. He was going to bin it! After updating with 10.6.8 combo update every thing works with out any additional kexts. So I did not install Multibeast - easybeast keeping as 'vanilla' as possible. So I use the iBoot cd to boot; the small price to pay.
I Used Retail 10.6.8 with iBoot PCIRootUID=1 at start. I have a Radeon HIS 5830 HD. Before I got the video drivers installed for it I was not able to get it working without PCIRootUID=1. Also Sound does not work from motherboard.
|
|
|
|
| P8H67-M Evo
|
H67
|
Core i5-2400 and ATI HD5750 graphics
- Used Multibeast 3.8 with lnx2mac Realtek 81xx drivers, USB fix, PCI fix and com.apple.boot.plist's PCIRootUID=1 key
- HD 5750 graphics don't work with 10.6.8 drivers, reinstalled 10.6.7 ATI kexts back.
|
|
|
|
| P8H67-M LE
|
H67
|
Core i7-2600 Sandy Bridge and ATI Radeon HD6870 graphics
- Installed Retail 10.6.3 first, then tonymacx86' Update Helper, then Combo Update (used Multibeast before reboot)
- Used Multibeast 3.8 with lnx2mac Realtek 81xx drivers, Renesas USB 3.0 fix, PCI fix and com.apple.boot.plist's GraphicsEnabler=no key
- HD 6870 graphics don't work with 10.6.8 drivers, reinstalled 10.6.7 ATI kexts back.
|
|
|
|
| P8H67-M Pro
|
H67
|
Core i5-2400, EVGA GT210 512mb, 4GB DDR3, SEAGATE 320GB
- Using iBoot and 10.6.3 Retail DVD, install 10.6.3. No other patch required.
- Apply UpdateHelper by tonymac, Reboot, Install Combo Update 10.6.8, DO NOT REBOOT
- Apply Multibeast 3.8, select easybeast, lnx2mac, system utilites, ALC8xxHDA + AppleHDA Rollback + EnableHDA
Sound, LAN, Graphics (fully), USB, restart/shutdown, timemachine everything is working (Sleep not tested)
|
|
|
|
| P8P67 Pro (REV 3.1)
|
P67
|
Core i5-2300 Sandy Bridge, XFX Radeon HD 5450 1GB, 8GB DDR3 (4x 2GB), SEAGATE 1TB 7200 RPM 6.0Gb/s
- Followed the install guide on InsanelyMac found Here
Sound, LAN, Graphics (fully), USB, restart/shutdown.
|
^Andy^_*'s Boot CD and Post Install Package. Found Here
|
|
|
| P8P67 DELUXE(REV 3)
|
P67
|
Core i5-2400 3.10 GHz 6MB Cache, Sandy Bridge, Ati X1650 Dev ID 0x71c3, 8GB DDR3 (4x 2GB), 2x SEAGATE 500 GB Sata
- Followed the install guide on InsanelyMac found Here,
Sound, LAN, USB, Sata, restart/shutdown.
- Graphics (Full resolution, NO DUAL SCREEN)
Installed JUST EVOEnabler.kext taken from here,
Edited ATI1600Controller.kext/Contents/Info.plist with VGA DeviceID (0x71C3),
Edited EVOEnabler.kext/Contents/Info.plist with VGA DeviceID (0x71C3),
Followed "QE/CI hexadecimal edit" section from this old guide (otherwise the following step will lead to kernel panic due to hard-coded deviceID references),
Edited ATIRadeonX1000.kext/Contents/Info.plist with VGA DeviceID (0x71C3).
|
regae' s Boot CD, Post Install Package and 10.6.8 Update Helper. Found Here
EVOEnabler.kext from this dmg
|
|
?
|
| P8Z68-VPro
|
Z68
|
OSX Universal Installer 10.6.2 v3.6 ( you might use other Hackintosh/Retail image )
- CPU i7 2600K
- MEMORY G.Skill 2x2G 1600Mhz
- GPU Gigabyte GTS250 VGAxDVIxHDMI
- Asus ML 24 (HD) - works with VGA connector only (no native HD so far with my card)
- DVD WR Samsung
Installation
- Start with Simple installation without iBoot (used the DVD own bootloader). /// Im a different user and I think best method is : To use iBoot. If you use iboot, when booted on CD, under iboot screen, after changing CD with DVD Install, press tab to inter simple mode (i did it to find the = and correct issue with keyboard) and use this command : PCIRootUID=1 -x to be able to reach install screen. I used the 10.6.0 DVD. Dont use Andyboot, its friendly user but doesnt work when installing10.6.8. After install : Use again : PCIRottUIS=1 -x but choose the place you installed Snow /// Do Not use the DSTD instructions when installer loads. just run the default installation.
- After installation, used the iBoot (iBoot Legacy for sandy bridge) to load into the OSX.
- Run MultiBeast and pick:
- EasyBeast.
- intel 1000 network.
- To Enable Sound: AppleHDA Rollback, ALC8xxHDA, Under Non-DSTD HDAEnabler - pick ALC892
- [pre-requisite for sandy bridge & 10.6.8 combo update] Run UpdateHelper (from tonymacx86 site).
- Reboot
- When OS loads it might not be responsive in the first few minutes, just wait ~2minutes.
- Install Snow 10.6.8 Combo Update
- [optional, if you have issues with bootloader] Use iBoot to load OSX and then run MultiBeast and re-install the Bootloader + SystemUtils (should fix the bootloader issues if any)
- Reboot
|
- RealtekR1000SL.kext
- Audio Multibeast: rollback, enabler and legacy(after 10.6.8)
|
|
|
| Sabertooth X58
|
X58 / ICH10R
|
System:
- Asus Sabertooth X58
- MSI R5770 Hawk
- Intel Core i7-960 Bloomfield 3.2GHz
- G.SKILL Sniper Low Voltage Series 8GB (2 x 4GB)
Install:
- iBoot with retail 10.6.3 (Retail CD) with your HD plugged into the FIRST SATA3 port (the black ones, the upper one on the opposite side of the grey SATA6 ports)
- Boot system with iBoot
- update with 10.6.8 combo updater (don't reboot)
- Multi Beast -> UserDST Install, System Utilities, 64-bit Apple Boot Screen
- kexts: USB 3.0-NEC/Renesas
- Ethernet: works
- Audio: works
- Video: works
- Sleep: works
|
|
|
|
| Sabertooth X58
|
X58 / ICH10R
|
System:
Install:
- From other Hackintosh system
- Boot system with iBoot
- update with 10.6.8 combo updater (don't reboot)
- Multi Beast -> UserDST Install, System Utilities, 64-bit Apple Boot Screen
- kexts: USB 3.0-NEC
- SSDT tables using Hackintosh Hardware Analyzer from Ubuntu; http://www.projectosx.com/forum/index.php?showtopic=1341
|
|
|
|
| E35M1-M Pro
|
AMD FCH A50
|
System:
- Asus E35M1-M
- Gigabyte Nvidia 240 GT
- AMD Fusion APU E-350 (Dual Core overclocked to 1.76 GZ)
- Kingston DDR3 1333 4GB Kit (overclocked at 1433)
Install:
- Installed retail 10.6.0 on another mac (show invisible files then installed from Installation/Packages/OSInstall.mpkg)
- updated to 10.6.8 combo updater
- Multi Beast -> VoodooHDA 0.2.61 (audio for HDMI works) / Lnx2Mac's eraltek network driver
- Legacy kernel from nawcom (patched drive with Maxxus AMD patcher) in com.apple.Boot.plist arch=i386 -force64 busratio=20
- Ethernet: works
- Audio: works (onbaord disabled)
- Video: works (enabler=y + GT215.rom in boot.plist)
- Sleep: not tested
|
Legacy kernel
|
|
|
| P5E3 Premium/Wifi-AP
|
Intel X48 - ICH9R SATA
|
Intel Q9550 CPU 2.82 GHz @ 3.4 GHz
- ATI HD4870 TOXIC (512MB) works fully with EVO Driver for HD4870.
- 4x2GB 1600 MHz Ram
- Audio - works
- Ethernet - Works
- WiFi - Works likely AirportExtreme
- USB - All Works
- Shutdown/Reboot works
Before Install:
- Enter in Bios
- Disable JMicronATA
- Set Sata to AHCI
Guide:
- Choose iBoot Legacy
- iBoot with -x
- First boot with -x
- In MultiBeast check EasyBeast - Sistem Utilities - Realtek Gigabit Ethernet - Kext Utility
- Move AppleHDA.kext and Sleepenabler.kext to system/library/extensions/
- Run Kext Utility
- Restart
- Patch DSDT with this guide
|
Patches
|
|
|
| Striker II NSE
|
Nforce790i SLI
|
bios revision 0901 you can save your bios setting under tools in your bios :) 32 bit Q6600 CPU @ 2.4 Ghz overclocked in bios to q6800 6gm ram 2 1gig 2 2gig all by ocz
- After installing IPC 10.5.6 or Hazard 10.6.6i follow youtube video [4] after snow leopard 10432 which is 10.6.0 is installed use the combo update by apple 10.6.8v1.1 Do not use software update causes issues
- Sound=Voodoohda.kext works no digital audio yet..airfoil is what I used to get audio to stream to airport express for the time being. Also if using vlc delay audio to -2050.
- Video=Nvidia Gtx280 works hdmi full 1080p no audio via hdmi yet
- Ethernet=Both On board nic's work. Used Netkas support files installed ionetworkingfamily.kext in S/L/E then showed the packages contents and deleted nvenet.kext in plugins then put NforceLan.0.64.5.kext (This improved the stability of the machine immensely and torrent downloads now seem stable!)
- Ide works OOB
- Sata works
- Usb works
- Esata rocketraid 2302 Enable plug and play OS in bios then it works also use cpus=2 as a boot flag only running as dual core but still useable if you want e-sata support. AppleNforceATA.slash.kext needs to be updated for raid support see this link http://code.google.com/p/darwin-ata/issues/detail?id=2
Kexts used in S/L/E all in verdants v2.3 support files Install them there or you will have issues
- Ionetworkingfamily.kext modified by me :)
- AppleNforceAta.slash.kext or AppleNForceATA.imk64bit.kext since I have over 4gb of ram
- JmicronATA.kext (When I replaced this existing kext it helped my raid become more stable)
Files in Extra
- Com.apple.boot.plist
- DSDT.aml upper case for chameleon to read it needs to be modified so you do not lose your bios settings. (http://netkas.org/?p=114) I used dsdtse to extract, DO NOT USE THE INSTALL DSDT OPTION YOU WILL WRECK YOUR OS!
- SMBIOS_MacPro31.text
Files in E/E
- Openhaltrestart.kext
- Disabler.kext
- Fakesmc.kext
- Platformuuid.kext
My com.apple.boot.plist
- <key>Kernel</key>
- <string>mach_kernel</string>
- <key>Timeout</key>
- <string>5</string>
- <key>Kernel Flags</key>
- <string>arch=i386 pmVersion=0</string>
- <key>EthernetBuiltIn</key>
- <string>y</string>
- <key>GraphicsEnabler</key>
- <string>y</string>
- <key>PciRoot</key>
- <string>1</string>
|
Vanila
|
|
|
| P7H55-M
|
Intel H55
|
System Configuration:
- CPU: Intel Core i5 760 @ 4.0GHz
- Video: Palit Geforce GTX 460 Sonic 1GB
- LAN: Onboard
- Sound: Onboard
- Storage: H55 SATA
Install Method: iBoot + MultiBeast
|
- tonymacx86 iBoot (Used cpus=1 PCIRootUID=1)
- Retail Mac OS X 10.6 Snow Leopard
- 10.6.8 Combo Update
- EasyBeast
- Lnx2Mac's RealtekRTL81xx Ethernet
- Chimera v1.5.4 r1394
- FakeSMC
- ALC8xxHDA
- Non-DSDT HDAEnabler
|
|
|
| P5Q SE
|
Intel P45 / Intel ICH10
|
System Configuration:
Install Method: iBoot+Multibeast (10.6.3 -> 10.6.8)
- Motherboard: Asus P5Q SE
- BIOS: Asus 1003
- CPU: Intel E8200 Core2Duo
- Video: XFX ATI Radeon HD4890 1024MB DDR3, DVI works fully after Combo Update and MultiBeast ATI 48xx
- RAM: Corsair DDR2 2GB (2x1Gb)
- HD: Samsung 360 Gb
Components Status:
- Audio - onboard - use MultiBeast Voodoo generic
- Ethernet - Attansic L1E kext from kexts.com + EFI Studio 1.1
- USB 2.0 - Native Support
- IDE - No IDE support
- CPU - Speedstep -Native support
- Firewire: Native Support
- Video - Graphics Enabler= yes / ATI 48xx from MultiBeast - full resolution 1920 x 1200 / DVI-->VGA single screen
Post Install:
- Combo Update Mac OS X 10.6.8 v1.1 [5]
- After update run Multibeast
|
- Multibeast
- Attansic L1E
- Voodoo generic
|
?
|
?
|
| Hardware Name
|
Chipset
|
Notes
|
Patches Used
|
32/64bit working with patches
|
| GA-G41M-Combo
|
ICH7
|
- BIOS updated : September, 06 2010
- Intel Core 2 Duo 2.7 Ghz
- Memory : 2GB of Ram (DDR3)
- VGA : nVidia Geforce 8400 GS 512 MB
- Audio : Full working
- Network Full working
- Graphic Full working with QE/CI
- Monitor : Hp w1707 with connect by DVI Cable
- Hard Disk : Seagate 1TB
|
- Installed 10.6 Retail by EmpriseEFI CD + Combo update to 10.6.8
- Use Multibeast to Restore USB functions, installed fakesms.kext, and installed Chameleon RC5 R699, you can choice some different files if you need )
- Bootloader - Chameleon RC5 or Chimera 1.1 (Tested on May 6, 2011)
- DSDT created by DSDT autopacher and it's so amazing :)
- Audio - Voodoo HDA 0.2.1 Modded to link from Speaker to PCM with Volume Control worked perfectly.
- Video - nVidia Geforce 8400 GS 512 MB (just only add GraphicsEnabler=y to com.apple.Boot file or you can using nVEnabler.kext)
- SATA - AHCI in BIOS (Set up default on BIOS)
- Note : You must saving ACPI + PCI 10.6.7 for 10.6.8 from 10.6.7 install in here to boot without error PCI Config, just on 10.6.8
- Ethernet - AtherosL1Ethernet.kext (the below link it's lastest version to fix any random kernel Panic).
- Sleep & Wakeup : Works no need to SleepEnable.kext !
- Here all my file with GA-G41M-Combo: [15] (Found on 3 days to take full files)
|
|
|
| GA-EP43-DS3 F9 bios
|
Intel P43
|
- CPU Intel E6600 @ 2,40 GHz
- Install with original DVD + iBoot + update to 10.6.7 from Apple + update 10.6.8 : flawless
|
|
|
|
| GA-EP43-DS3L
|
Intel P43
|
- Geforce 8400GS
- Sound: ALC888
- Ethernet: working
- Install BIOS cartri,
Combo Update to 10.6.8 from 10.6.7
need 3 new patched kexts for sound, from www.kext.com
|
|
|
|
| EP45-UD3LR
|
Intel P45/ICH10R
|
- For Install use: Kakewalk[16]
- Mic (green Line) works fine.
- Sleep and Wake up works perfect.
- Shutdown/Restard works fine.
- LAN (DHCP) works fine.
- If you dont want use Cartri BIOS, check following DSDT: [17]
|
|
|
|
| GA-EP45-DS3 (rev. 1.0)
|
Intel P45/ICH10
|
BIOS Settings - F10e (this has quickboot mode)- [20]
- Advanced BIOS Features
- HDD S.M.A.R.T. Capability -Enabled
- CPU Multi-Threading - Enabled
- CPU EIST Function
- Integrated Peripherals
- Legacy USB storage detect - Disabled (prevents trying to boot from usb)
- Initially installed with: Kakewalk (kakewalklegacy.iso from older CD version) [21]
- ALC889a Audio [22]- All analogue and digital audio working
- Sleep (All boxes need to be ticked in System Preferences > Energy saver)
- Shutdown/Restart works (PME Event Wake Up - Disabled)
|
- DSDT.aml (for F10a bios) [23] - Kakewalk default gives about 2/3 of full speed
- ALC889a installed with Multibeast - Kakewalk install sound doesn't work
|
|
|
| G41M-ES2l
|
Intel G41M + Q8200
|
- Video: GTX260 - NVenable + GT200driver.pkg+CUDA Driver for CUDA suport adobe and more
- Sound: Voodoo HDA works OK mic in line in
- Ethernet: working
- Reboot work / sleep not work
- Install Original DVD Snow Leopard 10,6,3 and iBoot+Multibeast Easy Instal + Vodoo HDA + NVENABLE
Combo Update to 10,6,8
|
|
|
|
| GA G31M-ES2C
|
Intel G31/ICH7
|
- Fully working and capable upgrading to Lion
- Memory: 2GB DDR2
- Video: NVidia 7200 GS 256 MB - QE/CI fully working through EFI string injection
- Sound: ALC889 - MultiBeast with VoodoHDA.kext
- LAN: RTL8102E - Driver download from Realtek website. To enable builtin Ethernet EFI Injection used.
- SATA & IDE: SATA Works, IDE CD/DVD fine, but IDE HDD somewhat makes Chameleon stuck.
- Optical Drive: IDE CD/DVD Drive works fine and able to install without problem
- Shutdown & Reboot works. Sleep probably need DSDT Patch / SleepEnabler.kext (untested)
- Install Original DVD Snow Leopard 10.6.3 with iBoot + Update 10.6.8 Combo + Multibeast Easybeast Install + VoodoHDA + EFI string Injection for BuiltIn Ethernet & Full QE/CI
|
- iBoot + Multibeast (Easy Install, VoodoHDA)
- LAN Driver download from Realtek website, Use EFI Injection to enable Builtin
- Full QE/CI used EFI string Injection to recognize GeForce 7200 GS
- Probably need DSDT patch to enable sleep working properly
|
|
|
| G41MT-D3V
|
Intel G41/ICH7
|
- CPU: Q6600 (2.4GHz)
- Memory: 8GB correctly detected, speed detected
- Sleep/Wake: fully working
- Shutdown/Restart: fully working
- Ethernet: RTL8111E. Fully working with Realtek official drivers v2.0.6. Don't work with VMWare Bridging, use NAT instead.
- Sound: didn't bother although it is supposed to work OK with the ALC889 patches. I use USB sound so don't need this.
- Graphics: Built-in G41 not supported. I use Nvidia GT240 (Chameleon GraphicsEnabler only required)
- USB: fully working. Gigabyte ON/OFF Charge works in Sleep!
|
- Installation procedure: here
- Boot loader: Chameleon RC5 (latest)
- DSDT Auto Patcher to create DSDT: fixes sleep/wake, HPET, USB, etc.
- /Extra/Extensions: Only requires fakesmc.kext (NullCPUPowerManagement.kext & SleepEnabler.kext not required)
|
|
|
| GA-EP45T-USB3P
|
Intel P45 Express/ICH10R
|
- CPU: Q6600 (OC to 2.79GHz)
- Memory: 8GB DDR3 (4x2GB PNY 1333MHz) correctly detected, speed detected
- Sleep/Wake: Worked on 10.6.4 when I used DSDT. No DSDT for this install, have not tried sleepenabler kext.
- Shutdown/Restart: fully working with EvO shutdown/reboot kext
- Ethernet: RTL8111D. Fully working with Realtek official drivers
- Sound: Working OK with the ALC889 patches. (Only tested green jack line out. Select internal speakers in sound prefs)
- Graphics: Running 2x9600GT with Aquamac EFI string method. QE/CI and res change on all cards. BIOS set to PEG, not PEG2.
- USB: Fully working. USB 3.0 works with NEC kexts.
|
- Installation procedure: TonyMacX86 July 2011 Release iBoot/MultiBeast install with 10.6.3 retail DVD and update to 10.6.8 before MultiBeast install.
- Boot loader: Chameleon RC5 (latest)
- MultiBeast Options: FakeSMC with temp monitor plugins, nullcpupowermanagement, evoreboot, jmicronATA, jmicroneSATA, all ALC889 options, Realtek 8xxx official driver
|
|
|
| GA-P61-USB3-B3
|
Intel H61
|
- CPU: Intel Core i5-2300
- Memory: 4GB Cosair XMS3 DDR3 1333 (PC3 10666)
- Ethernet: Realtek 8111E. Fully working with MultiBeast Realtek patch
- Audio: Realtek ALC889. Green line working with MultiBeast Realtek patch.
- Video: EVGA 8400GS 512MB. Full QE/CI (GraphicsEnabler=Yes)
- USB: OOB. USB 3.0 not tested. Used MultiBeast USB 3.0 patch and ports work as USB 2.0
- Reboot/Shutdown work, Sleep not tested, turned off in System Configuration.
|
- Installation procedure:
- Installed 10.6.0 on separate machine using iBoot + Combo Update 10.6.8
- Ran Multibeast to restore USB, enable audio, and ethernet
- Used UniBeast method to create a boot partition and set its org.chameleon.boot.plist to boot to Snow Leopard drive
- Moved drive to target machine
- Edit org.chameleon.boot.plist on Snow Leopard partition to GraphicsEnabler=Yes, may have to use PCIRootUID=1 fix
|
|
|
| H61M-D2P-B3 rev. 1.0 (BIOS F5)
|
Intel 6 Series
|
- Video - eVga 8400GS 1GB DDR3 64-bit - Works with editing NVDANV50Hal.kext and PCIRootUID=1
- Sound - MultiBeast AppleHDA Rollback and ALC889
- Ethernet - MultiBeast Realtek drivers
- Reboot / Sleep - Works
- iBoot + Multibeast install guide used with DSDT: Fresh 10.6.0 -> Mac OS X 10.6.8 Helper -> 10.6.8 Combo Update -> Mac OS X 10.6.8 Helper -> MB -> Reboot -> Edit NVDANV50Hal.kext -> Reboot
|
|
|
|
| P55-USB3 Rev2 BIOS F9
|
Intel P55
|
- Video: ATI-5770 (Powercolor)
- Sound: Realtek ALC892 - need AppleDHA Rollback after update from 10.6.7 to 10.6.8
- Ethernet: working
- Reboot / sleep works with spleasesleep
- iBoot + Multibeast install guide used with DSDT
|
|
|
|
| X58A-UD7 R2 BIOS FC
|
Intel X58
|
- Video: ATI-5770, Needs unplug replug after restart, or wait until screensaver kicks in
- Sound: Realtek ALC889 - works
- Ethernet: working
- Reboot / sleep works
- iBoot + Multibeast install guide used with DSDT
|
|
|
|
| GA-X58A-UD3R Rev 2
|
Intel X58 + ICH10R
|
CPU Intel i7 950 @ 3,20 GHz - FE Bios. Also works with FF Bios
- Video: ATI Sapphire 5850HD Vapor X, work OOB
- Sound: Realtek ALC889a after the update you have to reinstall AppleHDA with multibeast (appleHDa rollback)
- Ethernet: working. I installed the Lnx2Mac Realtek RTL81xx Driver. (Look it up online) So far it works well. Make sure to select the debug install option.
- Reboot / sleep works
- update from 10.6.6 (boot 132 + multibeast)
|
|
|
|
| GA-G31M-ES2L (Rev. 2.4)
|
Intel G31M Express Chipset
|
- CPU: Intel Pentium Dual Core E5800 @ 3.20 GHz
- RAM: 4 GB (2x2GB) Patriot DDR2 800 MHz
- Graphics: Gigabyte GeForce GT 220 1 GB DDR3 (Use NVEnabler, 64-bit preferred)
- Audio: RTL888b (Actual Kext, but you need to find this package 10.6.2-AppleHDAInstaller.pkg for it to work)
- Ethernet: RTL81xx
- Wireless: Edimax EW-7811UN USB 2.0 Wireless Adapter: Installer package can be downloaded from vendor website. Plug in before installation starts
- Bluetooth AZiO BTD211 USB 2.0 Bluetooth Adapter: Plug in before installation starts
- Webcam: HP Webcam 3100: Plug in before installation starts
- Reboot, Sleep, 64-Bit Kernel Completely Work
- Installation Guide:
- iBoot 2.0.4 + Multibeast 3.7.2 + OSX 10.6.3 Retail DVD
- Download Before Install: OSX 10.6.8 Combo Update + DSDT Auto-Patcher + HDEF Gigabyte DSDT Auto-Patcher + AudioKext Package
- After install has completed and you reboot with iBoot, run combo update, but before you restart to finish the update run the packages in this order:
- 10.6.2-AppleHDAInstaller, DSDT Auto-Patcher, then HDEF Gigabyte DSDT Auto-Patcher (it will overwrite original DSDT), run Multibeast (select UserDSDT, NullCPU.....kext, EvoReboot.kext, Repair Permissions, Repair Caches, NVEnabler.kext, and any SMBIOS or 64-bit plist you prefer).
- When you are done, you will be booting into Chimera (no need for -v or -x, but do it if you choose) with a complete installation.
|
|
|
|
| GA-G31M-ES2L (Rev. 2.4)
w/easybeast
|
Intel G31M Express Chipset
|
- CPU: Intel Core 2 Duo E3200 @ 2.40 GHz
- RAM: 2 GB DDR2 800 MHz
- Graphics: Asus GeForce 8400GS 512MB DDR3 **Complicated**
- Audio: RTL8883 (use VoodooHDA Mulitbeast)
- Ethernet: RTL81xx (use AtherosL1cEthernet.kext + EFIStudio)
- Reboot Completely Work
- Installation Guide:
- iBoot 3.0.2 + Multibeast 3.10 + OSX 10.6.3 Retail DVD + Combo 10.6.8
- Completely follow http://tonymacx86.blogspot.com/2010/04/iboot-multibeast-install-mac-os-x-on.html
- After Upgrade to 10.6.8, Ethernet is lost, and vido is not QE/CI enabled. See install to right.
- I got Ethernet to work see install instruct to right.
|
|
|
Template:?
|
| GA-H55M-USB3 F11 bios
|
Intel H55
|
- CPU Intel Core i3 540 @ 3,06 GHz
- Video: 9800GT PNY recertified dual DVI, work OOB with graphic enabler=yes
- Sound: Realtek ALC889a after the update you have to reinstall AppleHDA with multibeast (rollback, legacy and enabler)
- Ethernet: install with multibeast
- Reboot / sleep works with sleepenabler 10.6.8 kext.
- install method iboot and multibeast, install mac os x 10.6.3 retail dvd (use -v if boot issues), boot with iboot cd, install mac os 10.6.7 update, select in multibeast dsdl install with all kexts you need and utilities,except audio and sleepenabler (if you cant use usb reboot with usb put in cpu), use everything from multibeast except fakesmc (dont show cpu temperature)need to use a older one an put it in extra files after multibeast finish,now use kextutilities an reboot,now install 10.6.8 update dont reboot use multibeast and install audio and sleepenabler, reboot and thats all, LegacyIOAHCIBlockStorage.kext to avoid yellow hard disk.
- and please dont use 240GT dont work at 100% check in nvidia section i posted.
|
- fakesmc.kext (old one)
- NullCPUPowerManagement.kext*sleepenabler 10.6.8
- LegacyIOAHCIBlockStorage.kext
- nec usb 3 patch
- and ethernet from multibeast the first one
- dsdt F11 from tonymacx86 in dsdt section
|
|
|
| GA-H67MA-UD2H-B3 F4 Bios
|
Intel H67
|
- works like a charm, Graphics working (Sapphire Radeon HD 5850), Sound working, Ethernet working even Sleep Mode working (turn's off all fans, consums only 16W in sleep), USB 3 ports are working with full speed, SATA 3 works with full speed
- iBoot + Multibeast 3.8.0
- check tonymac DSDT database
- read further instructions here: [24] will write a better tutorial soon
- see posts by username Seim for Multibeast settings
|
|
|
|
| GA-H67A-UD3H-B3 (F6 BIOS revision)
|
Intel H67
|
- Install Snow Leopard using iBoot + MultiBeast
- Update to 10.6.8 using Sandy Bridge guide (update causes KP without UpdateHelper. Run MultiBeast for DSDT ONLY, run UpdateHelper, reboot, run 10.6.8 Combo Updater, run MultiBeast again (DSDT ONLY), reboot, install LAN and audio kexts with MultiBeast)
- If using Intel HD 2000 video (integrated into CPU), screen is black after 10.6.8 update reboot. Shutdown system after update, install 3rd party video card, turn system back on. HD 2000 is incompatible with SL. According to this thread it works on Lion (after removing a kext).
- Install Lion using xMove + MultiBeast
|
ALC889, RealtekRTL81xx
|
|
|
| Gigabyte GA M56S-S3
|
nVidia nForce 560
|
- I installed iAtkos S3 V2 first, so 10.6.3.After that, I installed 10.6.8 update combo from apple site, and before restarting I changed the kernel with the latest from Darwin.
- Bios:F6G
- Audio:Works ok with VoodooHDA included in iAtkos distro, even after update.
- LAN: Realtek 8211BL, works with the driver included in iAtkos distro
- SATA & IDE:Both work, just select AppleNforceATA at the beggining of the installation.
- Optical Drive: Asus DVD-RW 1814BL-T, working as it should.
- Shutdown and restart works ok, haven't tried sleep, because I don't use it.
- The processor, an AMD Athlon II X2 240 is detected as a Core 2 duo.
- Also the RAM, 2GB of them is properly detected at 800mhz.
- nVidia Geforce 9600 GT 512MB, installed with NVEnabler64 kext.Everything is working fine.
|
I use Chameleon bootloader and Darwin 10.8.0.No problems at all, quite surprised it runs so well on an AMD machine.
|
Yes
|
|
|
| GA-P67-UD4-B3
|
Intel P67
|
- CPU: Intel 2600k
- Graphics Sapphire Radeon HD 6870 Fully recognized with QE/CI working
- Sound working
- Sleep Mode working
- USB 3 working in full speed
- Installed by 10.6.0 Retail DVD
- Updated with 10.6.8 Combo Update
- Installation & hardware recognition by iBoot + Multibeast 3.8.0
- Downloaded GA-P67-UD4-b3 DSDT from tonymac
|
- Sound: AppleHDA Rollback, ALC8xxHDA
- Ethernet: Realtek Gigabit Ethernet 2.0.6
- FakeSMC Plugins
- USB 3.0 - NEC/Renesas
All included in MultiBeast.
Guarantee one of most recommended parts for hackintosh build in 2011. Everything just works effortlessly from installation, 64bit, audio, ethernet, graphics with QE/CI & multiple display (OOB), even sleep mode just works from the moment after running MultiBeast.
You can see 'Full Tutorial of Making Hackintosh' for more information.
|
|
|
| GA-MA770-S3
|
AMD SB700
|
- CPU AMD Athlon x2 5000 3.0Ghz
- Video: nVidia 8600GT
- Sound: Realtek ALC888 HD
- Ethernet: Autodetected
- Install Method: Retail with Nawcom ModUSB
- Retail 10.6.3 Used -> Upgraded with Combo update to 10.6.8 and installed Nawcom's Legacy Kernel for 10.6.8 before reboot.
|
- Nawcom ModUSB autodetected most everything needed to produce a fully functional system!
- ElliotRTSC Chosen during installer to prevent CMOS wiping (just to be safe)
- VoodooTSCAMDSync Installed with Kext Helper after Installation - Keeps cores in Sync for better stability/performance
- Sleep doesn't work with S1 or S3 selected in BIOS. Sleepenabler.kext is installed.
- Shutdown/Restart broken - EVOReboot and OpenHaltRestart tried with no success
- VoodooHDA is crackly unless you open the prefs panel and tune it a bit, turn the input gain down and put checks in Use SSE2 and Enhance Audio - Otherwise Kexts.com has a AppleHDA.kext for ALC888 that sounds perfect without tweaks but you lease everything but output.
- Volume Control didn't work with keyboard controls properly until I upgraded to 10.6.8
- Sleep/Shutdown/Restart issues might be fixable. Haven't dug around a whole lot yet.
- Overall the system is 8/10. Stable enough for daily use (so far) with only minor problems that aren't deal breakers.
|
|
|
Please specify if your card is AGP, Integrated, PCI or PCI-E.
Also, place chip and board manufacturer in their respective column.
| Model
|
Board-Manufacturer
|
Notes
|
QE
|
Output
|
Dual display
|
32/64bit working
|
| X1800XT
|
MSI
|
- Native support By PIEROF81...
- 100% Compatible OS X Tiger 10.4.x, OS X Leopard 10.5.x OS X Snow Leopard 10.6.x '32/64 Bit OS X Lion 10.7.x '32/64 Bit !
|
|
2x DVI
|
|
|
|
| HD 4350
|
HIS
|
- Will work after updating with combo update v.1.1
- Use Chimera Boot Loader inside multi boot 4.02 , with kernel parameter <string>arch=i386 npci=0x2000</string>
- Input IOPCIMATCH on /System/Library/Extensions/ATI4600Controller.kext , ( 0x954F1002 ) rapair permissions, and reboot.
|
|
VGA/DVI/HDMI
|
|
|
|
| HD 4650
|
Sapphire
|
- Works with these kexts [25] replace kexts in /System/Library/Extensions. Also included a boot file, which needs to be replaced in the root folder.
- Add GraphicsEnabler=Yes in com.apple.boot.plist, then repair permissions with kext utility.
- Power Color HD 4650 1GB DDR3 works with this kext http://www.kexts.com/view/1378-powercolor_hd4650.html
|
|
VGA/DVI/HDMI
|
|
|
|
| HD 4650 (H465fs512)
|
HIS
|
- Works with these kexts [26] Install with Kext Helper b7
|
|
DVI (Dual works *mirrored only*, HDMI (port 1) has static, No HDMI port 2
|
|
|
|
| HD 4850 512MB
|
Asus
|
- ATI48xxInjector.kext[27] from MultiBeast[28] 3.7.3 placed in E/E
- Chameleon 2 RC5 r1155[29] with GraphicsEnabler=Yes in org.chameleon.Boot.plist.
|
|
DVI/DVI (Both)
|
|
?
|
|
| HD5450 (EAH5450 512MB)
|
Asus
|
- Install iatkos s3 v2 without any vga patch
- update to 10.6.8
- multibeast 3.8 chose easybeast Install
- Install ATI5000injector.kext to Extra using kextwizard and Fix Permission
|
|
VGA/DVI/HDMI ?
|
|
|
?
|
| HD 5670 1GB
|
Sapphire
|
|
After updating to 10.6.8 [combo update] works OOB.
|
|
DVI
|
|
?
|
| HD 5670
|
XFX
|
- Works OOB after 10.6.8 combo update.
|
|
- DVI-Yes
- HDMI-?
- Displayport-?
|
?
|
|
|
| HD 5670
|
Asus
|
- Works almost OOB after a clean install with Leohazard 10.6.2 + combo 10.6.8 update using latest Chimera or latest bootloader from kabyl.
- GraphicsEnabler=Yes, UseATIRom=Yes and place your rom in /Extra.
- Use following rom: [30] Rename to "1002_68D8_03561043.rom".
|
|
VGA/DVI/HDMI ?
|
|
|
?
|
| HD 5770
|
GIGABYTE
|
- Worked OOB after 10.6.8 update from iATKOS S3 v2 10.6.3 clean install.
- GraphicsEnabler=Yes.
|
|
DVI/DVI/HDMI
|
|
|
|
| HD 5770 SL 1GB GDDR5
|
GIGABYTE
|
- fully working with Netkas/Mulitbeast 10.6.8 Ati
- GraphicsEnabler=Yes
- Running on 2560x1440 (DVI/HDMI/DP)
- Displayport works only as Slave
- Sensors also working well with iStats
- for dual monitor w/HDMI + DVI, set ATI Config to "Peregrine" in boot.plist
|
|
DVI/HDMI/Displayport
|
|
|
|
| HD 5770
|
XFX HD5770 DP Eyefinity
|
- Worked OOB after 10.6.8 update from iAtkos 10.6.3 clean install.
|
|
2xDVI
|
?
|
|
|
| HD 5830
|
HIS
|
- Follow Instructions found on this thread:
http://www.tonymacx86.com/viewtopic.php?f=15&t=4752
|
|
DVI/VGA
|
|
|
|
| HD 5850
|
Sapphire
|
- works OOB with Chimera Bootloader (included in Multibeast) and GraphicsEnabler=yes
- DisplayPort is NOT working, just a black screen but it recognize that something was plugged in
- DVI works just up to FullHD resolution (1920x1080) if you have a resolution above this you have to plug out the cable and plug it back in to have a picture (everytime after booting)
|
|
DVI/HDMI
|
?
|
|
|
| AMD HD6350 512MB DDR3 DMS59 Connector (HP OEM)
|
AMD / HP OEM
|
- Install OSX 10.6.x, Update to 10.6.8,
- Edit and insert Vendor and Device ID's (Dev 68f9, Ven 1002) to both ATI5000Controller.kext and ATIRadeonX3000.kext, install them using Kext Utility.
- Reboot system, video card will be listed as a HD5000 series, but works 100% with full resolution change and QE/CI.
- I installed it on an HP DC7900SFF with an edited DSDT and an imac9.1 smbios.plist and graphics enabler=Y.
|
|
2 x VGA or 2 x DVI
|
|
|
|
| HD 6750 (1GB)
|
Sapphire
|
- Chameleon 2 RC5
- GraphicsEnabler=No.
- Not Working
- Kernel Panic with GraphicsEnabler=Yes
- Do not recognize VRAM
- 800x600 Mode only
|
|
|
|
|
|
| HD 6850 (1GB)
|
XFX (Dual Fan)
|
- Chameleon 2 RC5
- GraphicsEnabler=Yes.
- Fully Works
|
|
|
|
|
|
| HD 6450 1GB
|
Generic
|
- Full Works(10.6.8) but Hdmi contection turns the tv to green colour(VGA full ok).
|
| Model
|
Board-Manufacturer
|
Notes
|
QE
|
Output
|
Dual display
|
32/64bit
|
| NVIDIAGeforce 8400 GS 512 MB DDR3
|
Zotac
|
Works with GraphicsEnabler=Yes feels OOB and all features. follow instructions here [31] / if you get Black Screen use Kernel Flag: pciu=1 GraphicsEnabler=yes
|
|
VGA/DVI/HDMI
|
|
|
|
| GT520 SILENT 1GB DDR3
|
Asus
|
Works OOB (with GraphicsEnabler=Yes) How??? I can't do that!! my email: cl06_cl06@hotmail.com
|
|
VGA/DVI/HDMI
|
|
|
|
| EN210 SILENT 512 MB DDR2
|
Asus
|
Works using EFI string (followed this guide) with DVI-I/DVI-I option in EFI string.
Works OOB if suitable DSDT file is provided, with GraphicsEnabler=Yes.
|
|
VGA/DVI/HDMI (tested via HDMI->DVI cable)
|
|
?
|
?
|
| GeForce 8400 GS
|
EVGA
|
GraphicsEnabler=Yes Snow Leopard 10.6.8 NVIDIA ID 10de:06e4
|
|
VGA/DVI
|
|
?
|
|
| GeForce 8500 GT
|
MSI
|
Graphics Enabler and NVenabler both work
|
|
VGA
|
|
|
|
| Geforce 8800GT
|
NVIDIA
|
Works with GraphicsEnabler
|
?
|
DVI/DVI
|
|
|
|
| Geforce 8800GTX
|
Palit
|
Works with GraphicsEnabler
|
?
|
DVI/DVI
|
|
|
|
| GeForce 9400GT
|
XFX
|
Follow this guide
|
|
DVI/VGA
|
|
|
?
|
| GeForce 9400GT 1Gb DDR2 128bit
|
Digital Alliance
|
Works with GraphicsEnabler=Yes, QE just on DVI
|
|
DVI/VGA
|
Not Test
|
|
|
| GeForce 9600GSO
|
XFX
|
Chameleon GraphicsEnabler
|
|
2xDVI
|
|
|
?
|
| GeForce 9600GSO
|
EVGA
|
Custom EFI string ( 768mb, vga/dvi ) (One display will work with nVenabler 64 kext but I was only able to get dual display to work without it and by using a custom efi string from uInstaller)
|
|
VGA/DVI (With DVI-VGA adapter on second port)
|
|
|
|
| GeForce 9600GT
|
EVGA (PNY card works also)
|
Works with GraphicsEnabler=Yes, full QE/CI and res change. Currently running dual card setup for triple displays with a PNY 9600GT as a second card, with custom EFI strings made using Aquamac method.
|
|
DVI/DVI (DVI-VGA adapters work on all ports)
|
|
|
|
| GeForce 120 GT (also known as 9500 GT) 512 MBytes
|
Apple
|
- With GraphicsEnabler in Chameleon as supplied with Blackosx's boot loader and supporting files.
- Is working with the Apple LED Cinema 27" display via Atlona Dual-Link to mini-DisplayPort adapter.
- Works via both direct connection of above monitor to mini-DisplayPort and via Atlona adapter to DVI port (both connection methods working in both Windows 7 and OSX 10.6.8).
|
?
|
DVI Dual-Link/Mini-DisplayPort
|
? (Probably with 1xDVI-M to 2xDVI-F but at half resolution)
|
|
? (monitor seems ok, but with my M/B locks-up on grey apple boot screen)
|
| GeForce 120 GT 512 MBytes
|
Apple
|
WOB on a ASUS P7P55D-E PRO motherboard and core i7 870. Booting with iboot cd and no hacked kexts or chameleon installed on hard drive
|
|
DVI Dual-Link/Mini-DisplayPort
|
|
|
|
| GeForce 210 1 GB DDR3 Silent
|
ASUS
|
*GraphicsEnabler=YES, custom EFI string injected on Boot.plist, you can download here [32]
- NOTE: The EFI strirng assumes card to be in PCI SLOT 1/0/0, which is the ones on gigabyte motherboard. Find out where is yours if it doesnt work, and modify supplied graphics.plist , then convert to HEX with GFXUTIL tool (look in this forum, very easy), and last substitute your customized hex lines in the boot.plist
|
|
DVI/VGA/HDMI
Dual Monitor OK
|
|
|
|
| GeForce 210 512 Mb DDR3 Silent
|
ASUS
|
GraphicsEnabler=YES and nothing more
|
|
DVI/VGA/HDMI
Dual Monitor OK
|
|
|
|
| GeForce GT 220 1 GB DDR2
|
GigaByte
|
NVenabler.kext (during Multibeast), no GraphicsEnabler in Chameleon
|
|
DVI/VGA/HDMI
|
|
|
|
| GeForce GT 220 1 GB GDDR2
|
ZOTAC
|
Install NVenabler.kext use Chimera and set GraphicsEnabler=No
|
|
DVI/VGA/HDMI
|
|
|
Template:?
|
| GeForce GT 240 512 GB GDDR5
|
GigaByte and PNY DDR3
|
- Works with NVenabler.kext (during Multibeast) or graphics enabler=yes (chimera efi)
- Important i already use this 2 cards in hackintosh and dont work 100% right you can see this in photoshop open a picture press f 2 times,them h, now move picture with mouse and see that the picture blink or movements are not syncro with mouse but if you use a real mac or use other cards like 9800gt, 250gts or 8600gts you dont have those kind of problems really is a problem if you use photoshop or photo edit software take care. and with enabler gpu is unknow in graphics info and dont use nvidia rom from card. i dont understand why tonys recomend this card i already try everything and dont work at 100%
|
|
DVI/VGA/HDMI
|
|
|
|
| GeForce GTX260 216SP OC
|
GigaByte
|
NVenable + CUDA drivers + GT200Driver.pkg for Full suport CUDA
|
|
DVI/DVI
VGA/VGA With Adapter
|
|
|
|
| ZOTAC GTX260 216SP
|
ZOTAC
|
NVenabler + 64-Bit GraphicsEnabler=No
|
|
DVI/DVI
VGA/VGA With Adapter
|
|
|
|
| GeForce GTX285 1GB
|
Palit
|
Works OOB
|
|
DVI/VGA/HDMI
|
|
|
|
| GeForce 7300GT 512Mb
|
Asus P5KPL
|
GraphicsEnabler=Yes Snow Leopard 10.6.8
|
|
DVI/VGA
|
|
|
|
| GeForce 7200GS 256Mb
|
Gigabyte G31M-ES2C
|
GraphicsEnabler=Yes + EFI String Injection + Snow Leopard 10.6.8
|
|
DVI/VGA
|
|
|
|
| GeForce GTX 460 Sonic 1GB
|
Palit
|
Used Official NVIDIA Drivers + Chameleon 2.0 RC5
|
|
DVI/VGA (HDMI not tested)
|
?
|
?
|
|
