Editing HCL 10.6.8/Portables

Jump to: navigation, search

Warning: You are not logged in.

Your IP address will be recorded in this page's edit history.
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 1: Line 1:
 
{{Portables|10.6.8}}
 
{{Portables|10.6.8}}
 +
 +
ACER
 +
 +
ACER EMaCHINE E720
 +
 +
Install method iATKOS s3
 +
This is a almost out of the box install
 +
 +
only select voodoo audio
 +
for wifi broadcom
 +
The video will work nd yes you can play video just fine via quicktime
 +
so quartz works..
 +
Sleep does not work..worked under iATKOS v7 by the way
 +
cause that dist also work on this laptop..
 +
 +
 +
This acer emachine e720 has been runnning Leo since the day i got her
 +
now 2 years !!
 +
 +
All i can say..this is the perfect MAC for students like me.
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
  
 
==Asus==
 
==Asus==
Line 28: Line 59:
  
 
* see [http://www.insanelymac.com/forum/index.php?s=&showtopic=212183&view=findpost&p=1749044]
 
* see [http://www.insanelymac.com/forum/index.php?s=&showtopic=212183&view=findpost&p=1749044]
 
===[http://www.asus.com/product.aspx?P_ID=wNlU5jNxXL3CrjRU Asus G60Jx] "Republic of Gamers"===
 
* Mine is the Best Buy model (I only mention this because I believe other G60Jxs have slightly different H/W).
 
* Don't forget that SL '''requires''' GPT.
 
See 10.6.4 entry [http://wiki.osx86project.org/wiki/index.php/HCL_10.6.4/Portables#G60JX_.22Republic_of_Gamers.22 here]. All that's required for 10.6.8 is the combo update.
 
  
 
===Asus K50ID===
 
===Asus K50ID===
Line 99: Line 125:
 
*'''LAN''': Realtek RTL8168 (works with Lnx2Mac's Realtek RTL81xx 0.90)
 
*'''LAN''': Realtek RTL8168 (works with Lnx2Mac's Realtek RTL81xx 0.90)
 
*'''Video''': AMD HD 6320M (integrated to APU / no QE/CI for the moment)
 
*'''Video''': AMD HD 6320M (integrated to APU / no QE/CI for the moment)
*'''SATA & IDE''': works OOB (with automatic selection form Nawcom USB)
+
*'''SATA & IDE''': works OOB (with automatic seclection form Nawcom USB)
 
*'''WLAN''': Atheros AR9285 (works with AtherosFix)
 
*'''WLAN''': Atheros AR9285 (works with AtherosFix)
 
*'''USB''': USB2 works OOB / USB3 (ASMedia ASM1042) Doesn't work (no search to make it work yet ...)
 
*'''USB''': USB2 works OOB / USB3 (ASMedia ASM1042) Doesn't work (no search to make it work yet ...)
 
*'''Webcam''': Doesn't work (no search to make it work yet ...)
 
*'''Webcam''': Doesn't work (no search to make it work yet ...)
 
*'''Sleepmode''': Not installed yet (no search to make it work yet ...)
 
*'''Sleepmode''': Not installed yet (no search to make it work yet ...)
*'''Shutdown and Restart''': Works
 
 
=== Asus 1015BX ===
 
 
*'''Global state''': Globally works. However, I advice you to have a lot of patience to get it work: however, displaying video and special websites (even Facebook) is really slow. Maybe replace the RAM with a 2GB module would do the affair..
 
*'''Install Method''': Retail 10.6.3 USB installation with Nawcom's ModUSB. Boot with busratio-18 GraphicsEnabler=Yes -v; then install the 10.6.7 combo update, before install Nawcom's 10.7.0 legacy kernel - do the same with the 10.6.8 combo update and the 10.8.0 legacy kernel; after that, delete EvilIOPCIFamily.kext. Run MyFix included in MyHack by Conti. If you meet problems during boot try "GraphicsEnabler=No"; for further information to install see this guide: http://www.insanelymac.com/forum/topic/253767-amd-1068-guide-written-by-devout/
 
*'''Chipset''': AMD Hudson-1 / K14
 
*'''Processor''': AMD C-50
 
*'''Video''': AMD HD Radeon 6250 - recognized but no kext loaded (no kext existing for this type of card at the moment..). By luck, the minimal resolution exactly fit to the screen's size
 
*'''Audio''': Realtek ALC269 (not sure) - not working yet
 
*'''Keyboard/Mouse''': Works - run myFix by using MyHack
 
*'''Internal Microphone''': Not tested yet
 
*'''LAN''': Atheros AR8152
 
*'''WLAN''': Atheros AR9285 - http://www.osx86.net/downloads.php?do=file&id=1785&page=4
 
*'''USB''': Only one port works, the 2.0 - the 3.0 driver recognize USB drives but doesn't show them in Finder or Disk Utility
 
*'''SD Card Reader''': Not recognized
 
*'''Webcam''': Works
 
*'''Sleepmode''': Display don't shut off, wake is o.k.
 
 
*'''Shutdown and Restart''': Works
 
*'''Shutdown and Restart''': Works
  
 
==Acer==
 
==Acer==
 
=== Aspire 5935G ===
 
{{QE|Y}}
 
{| class="wikitable" width="100%"
 
!Parts
 
!Device
 
!Working
 
!Notes
 
|-
 
|'''Processor'''
 
|Core 2 Duo P8600
 
|Yes
 
|Out the Box
 
|-
 
|'''SATA1'''
 
|Hard Disk (ICH9 Family)
 
|Yes
 
|Out the Box
 
|-
 
|'''SATA2'''
 
|DVD+/-RW (ICH9 Family)
 
|Yes
 
|Out the Box
 
|-
 
|'''Graphics'''
 
|Nvidia Geforce GT130M
 
|Yes
 
|Out the box with GraphicsEnabler=Yes
 
|-
 
|'''Audio'''
 
|HDA ALC889
 
|Yes
 
|VoodooHDA.kext
 
|-
 
|'''Wireless'''
 
|Intel 5100
 
|No
 
|Replace With Any Atheros or Broadcom (No DSDT Patch required)
 
|-
 
|'''USB'''
 
|USB 2.0 (ICH9 Family)
 
|Yes
 
|Out the Box
 
|-
 
|'''Ethernet'''
 
|Broadcom BCM5787M
 
|Yes
 
|Patched driver by Nobb1x
 
|-
 
|'''Battery'''
 
|Integrated
 
|Yes
 
|VoodooBattery.kext
 
|-
 
|'''FireWire'''
 
|Ricoh
 
|Yes
 
|Out the Box
 
|-
 
|'''Card Reader'''
 
|Jmicron 385
 
|Yes
 
|IOSDHCIBlockDevice.kext (32/64 bits)
 
|-
 
 
|}
 
 
Notes:
 
 
* 10.7.4 retail + DSDT Patchgui + Intel 4500MHD works without QE/QI but is usable with Nvidia (HybridSLI)
 
* 10.6.8 retail + DSDT Patchgui + Disable Integrated Intel from Bios
 
* 10.5.7 retail + DSDT Patchgui + Disable Integrated Intel from Bios
 
  
 
=== Aspire 4320 ===
 
=== Aspire 4320 ===
Line 277: Line 213:
 
* Shutdown, restart and sleep works fine but retart after sleep its not working.
 
* Shutdown, restart and sleep works fine but retart after sleep its not working.
  
=== Aspire 5720 ===
+
=== Aspire One D255 ===
{| class="wikitable" width=100%
+
{{QE|N}}
!Hardware Name
+
This laptop uses the Atom processor which makes it crucial to begin the installation with Snow Leopard (10.6.0).
!Chipset
+
Everything works except WiFi (the Intel Centrino Wireless-N 1000 card).
!Notes
+
!Patches Used
+
!colspan=2| 32/64bit working ''with'' patches
+
|-
+
|'''Processor'''
+
|Intel Core 2 Duo T7100 @ 1.80GHz
+
|Working
+
|Native support
+
|{{Y}}
+
|{{Y}}
+
|-
+
|'''Video Card'''
+
|Intel X3100
+
|Working
+
|Native support (Boot with "arch=i386" in Chameleon)
+
|{{Y}}
+
|{{N}}
+
|-
+
|'''Chipset'''
+
|Intel 82801H - GM965
+
|Working
+
|Native support
+
|{{Y}}
+
|{{Y}}
+
|-
+
|'''Audio'''
+
|Realtek ALC268
+
|Working
+
|VoodooHDA.kext version 0.2.1
+
|{{Y}}
+
|{{Y}}
+
|-
+
|'''WiFi'''
+
|Intel 3945
+
|Not Working
+
|
+
|{{N}}
+
|{{N}}
+
|-
+
|'''Ethernet'''
+
|Broadcom Gigabit Ethernet BCM5787M
+
|Working
+
|BCM5787M kext by nobb1x
+
|{{Y}}
+
|{{Y}}
+
|-
+
|'''Touchpad and keyboard'''
+
|ALPS Synaptics
+
|Working
+
|ApplePS2Controller.kext
+
|{{Y}}
+
|{{Y}}
+
|-
+
|'''Card Reader'''
+
|Ricoh xD Picture Card Reader
+
|Working
+
|VoodooSDHC.kext
+
|{{Y}}
+
|{{Y}}
+
|-
+
|'''Integrated Camera'''
+
|Suyin Web camera
+
|Not Working
+
|
+
|{{N}}
+
|{{N}}
+
|-
+
|'''Battery'''
+
|Sanyo
+
|Working
+
|VoodooBattery.kext
+
|{{Y}}
+
|{{Y}}
+
|-
+
|}
+
  
Sleep not working
+
Install method: Boot with Empire EFI Version 1.085 (Compatible with Atom processors).
 +
Boot into OS X Installation from Empire EFI (which I had on a 8GB USB Stick, formatted with TransMac on Windows).
 +
Do a regular installation and the installer will say that the installation failed.
 +
Dont worry, boot into the system with Empire EFI and install the 10.6.8 Combo Update which you can download from apple's website. When it requests you to reboot, DON'T REBOOT!
 +
Create a backup of the kernel (/mach_kernel) and replace it with a file called "mach_kernel_atom" (sudo mv /files/mach_kernel_atom /mach_kernel).
 +
Install MultiBeast on the system, select System Utilities and EastBeast (if you don't want to use DSDT).
 +
Reboot and try booting without Empire EFI, if it doesn't work, boot with it.
 +
Install the regular installation of NetbookInstaller (by meklort) and reboot again (boot with Empire EFI if you can't boot the system).
 +
Backup the kernel again and replace it with "mach_kernel_atom" again.
 +
Install MultiBeast again, select EasyBeast, System Utilities, Audio -> AppleHDA and all the Misc -> VoodooPS2*** kexts.
 +
Reboot and you should be able to boot without Empire EFI.
 +
Enjoy your hackintosh :)
  
=== Aspire One D255 ===
+
Note: If you can't use your "internal" mousepad and keyboard, you probably need to install the VoodooPS2 kexts in MultiBeast -> Misc.
{| class="wikitable" width=100%
+
!Hardware Namew
+
!Chipset
+
!Notes
+
!Patches Used
+
!colspan=2| 32/64bit working ''with'' patches
+
|-
+
|'''Processor'''
+
|Intel Atom 1.30GHz
+
|Working
+
|Native support
+
|{{Y}}
+
|{{Y}}
+
|-
+
|'''Video Card'''
+
|Intel X3100
+
|Working
+
|Native support (Boot with "arch=i386" in Chameleon)
+
|{{Y}}
+
|{{N}}
+
|-
+
|'''Chipset'''
+
|Intel 82801H - GM965
+
|Working
+
|Native support
+
|{{Y}}
+
|{{Y}}
+
|-
+
|'''Audio'''
+
|Realtek ALC268
+
|Working
+
|VoodooHDA.kext version 0.2.1
+
|{{Y}}
+
|{{Y}}
+
|-
+
|'''WiFi'''
+
|Broadcom
+
|Not Working
+
|
+
|{{N}}
+
|{{N}}
+
|-
+
|'''Ethernet'''
+
|Broadcom Gigabit Ethernet BCM5787M
+
|Working
+
|BCM5787M kext by nobb1x
+
|{{Y}}
+
|{{Y}}
+
|-
+
|'''Touchpad and keyboard'''
+
|ALPS Synaptics
+
|Working
+
|ApplePS2Controller.kext
+
|{{Y}}
+
|{{Y}}
+
|-
+
|'''Card Reader'''
+
|Ricoh xD Picture Card Reader
+
|Working
+
|VoodooSDHC.kext
+
|{{Y}}
+
|{{Y}}
+
|-
+
|'''Integrated Camera'''
+
|Suyin Web camera
+
|Not Working
+
|
+
|{{N}}
+
|{{N}}
+
|-
+
|'''Battery'''
+
|Sanyo
+
|Working
+
|VoodooBattery.kext
+
|{{Y}}
+
|{{Y}}
+
|-
+
|}
+
  
 
=== Aspire 8930G ===
 
=== Aspire 8930G ===
Line 459: Line 253:
 
please recheck and insert details.
 
please recheck and insert details.
 
Thanks.
 
Thanks.
        you will have a lot of problems i have same notebook and running sn10.6.8 with legacy kernel v8
 
        booting to system is fast about 30s i thing very good booting for amd processor
 
        well but i cant isntall ati hd 5650 gig memory.. and internal ati hd4250
 
        and my internal keybord an touchpad not funcion at all and when i use appleps2 or voodoops2 my computer boot to system with big delay and after 15min ps2 keyboard and trackpad not function and function only external mouse and keyboard..
 
        not funcion wifi broadcom 43225 card
 
        and broadcom bluethoot
 
        im triing to fix it but without succes i need only 10.6.8 because is function for more games and software
 
        the same problems i have with lion but lion cant install directly from usb or dvd -legacy -v gives me error cpu
 
        without i have stuck at usbf...appleusbohci act....
 
        musr install iatkosl2 from existing 10.6.8. after -legacy -v booting to system well but much slower than 10.6.8 may be 3times slower and still read and begin my all kexts from s/l/e
 
        and kextutility kextwizard and other not solved this problem, diskutill repair permission too not succes.
 
        i think the problem in snow and lion with kexts for atigraphics and other hardware is 3bit amd kernel bronzovka,,no 64bit support yet and i dont no why hackers make the 64bit kernel for lion and snow10.6.8.
 
        I spend LOT OF TIME DURING SOLVING MY HARDWARE PROBLEMS --usbf PROBLEM ON GOOGLE NOBODY SUCCESFULLY SOLVED AND I DONT KNOW WHAT HARDWARE FROM MY LAPTOP DEPEND OF APPLEusbohci CHECK SLEEP CAPABILITY?????????,,ANYBODY WHO CAN HELP ME PLEASE GIVE HERE SOME POST AOR REPLAY OR SEND ME MAIL TO jaraskalka@EMAIL.CZ............HI FOR ALL CZECH MACHACKFELLAS
 
 
        TRIED RAW 64 BIT KERNEL FOR 10.7.4 AND -LEGACY -V NOT FUNCTION AND HAVE THE SAME RESULT AS WITHOUT...THE USBF STUCK COMMING.. WHEN I USE EHCIreset COMAND NOTHING ONLY STILLWAIT FOR ROOT DEVICE.. MAY BE PROBLEM WITH USB PORTS AND IDENTIFICATION.. BUT I CANT FIND ANY SOLUTION IN GOOGLE AND MYSELF TRIING TO REPLCE IOUSBFAMYLI....I NEED SOME MORE EDUCATED FELLA WHO HELP ME WIHT DSDT MAKING FOR MY GRAPHIC AND USB PORTS REALLY
 
 
        Last edited by skalin; Today at 03:40.
 
 
    Edit / Delete Edit Post  Quick reply to this message Reply  Reply With Quote Reply With Quote  Multi-Quote This Message     
 
 
      Alt (remove advertising)
 
 
    Advertising
 
 
        OSx86.net
 
        has no influence
 
        on advertisings
 
        that are displayed by
 
        Google Adsense
 
  
 
=== Aspire 2920z ===
 
=== Aspire 2920z ===
Line 544: Line 309:
 
*audio: alc268 works prefect with voodoo hda.
 
*audio: alc268 works prefect with voodoo hda.
 
*mic: worked on 10.5 no go with voodoo hda
 
*mic: worked on 10.5 no go with voodoo hda
*....
+
 
  
 
===Aspire 4740===
 
===Aspire 4740===
Line 633: Line 398:
 
* Graphics Controller: Intel GMA HD, works but with no acceleration. The nVidia GT 540M does not work.
 
* Graphics Controller: Intel GMA HD, works but with no acceleration. The nVidia GT 540M does not work.
  
===PCI Configuration Begin===
+
===Aspire 5315===
  
 
Bios setup options: SATA set to IDE mode because Windows 7 doesn't works well with AHCI mode, high CPU utilization while disk intensive operations
 
Bios setup options: SATA set to IDE mode because Windows 7 doesn't works well with AHCI mode, high CPU utilization while disk intensive operations
Line 653: Line 418:
  
 
Update to 10.6.8 with Combo updater from [http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg], at the end, don't press restart,  
 
Update to 10.6.8 with Combo updater from [http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg], at the end, don't press restart,  
* install legacy_kernel-10.8.0.v2.pkg from http://www.hackintoshosx.com/files/download/363-legacy-kernel-10-8-0-v2-pkg/
+
* install legacy_kernel-10.8.0.v2.pkg from http://blog.nawcom.com/legacy_kernel-10.6.8.v2.pkg.zip (more info about this kernel: [http://blog.nawcom.com/?p=791])
* to prevent "PCI Configuration Begin" error, install kexts from here [http://www.hackintoshosx.com/files/file/2297-appleacpiplatform-iopcifamily/] with kext wizard
+
* to prevent "PCI Configuration Begin" error, install kexts from here [http://www.megaupload.com/?d=2HY7O8IQ] with kext wizard from here [http://3rr0rists.net/driver/kext-wizard.html].
  
 
After install all update, '''delete''' AppleACPIPlatform.kext before reinstall it from SnowLeo installer pendrive with ACPIThermal package.   
 
After install all update, '''delete''' AppleACPIPlatform.kext before reinstall it from SnowLeo installer pendrive with ACPIThermal package.   
Line 673: Line 438:
 
sudo rm /var/vm/sleepimage   
 
sudo rm /var/vm/sleepimage   
  
Not works: TV/Video out, fax (winmodem)
+
Not works: TV/Video out, fax winmodem
 
Not tested yet: Express Card   
 
Not tested yet: Express Card   
 
    
 
    
Line 681: Line 446:
  
 
(details: [https://discussions.apple.com/message/12924009?messageID=12924009#12924009])
 
(details: [https://discussions.apple.com/message/12924009?messageID=12924009#12924009])
 
Warning: Sometimes crashing due buggy intel driver. Can't fix it, don't use as primary system.
 
  
 
=== Aspire 5315- 2153 ===
 
=== Aspire 5315- 2153 ===
Line 792: Line 555:
  
 
===Latitude D420, D430, D520, D530, D620, D630, D820, D830===
 
===Latitude D420, D430, D520, D530, D620, D630, D820, D830===
* Install Method: '''OSXLatitude''' -> follow [http://www.osxlatitude.com/ this link] for all the necessary details.
+
* Install Method: All explained http://www.osxlatitude.com/ here]
 
* Processors: Intel Centrino, Intel Core Duo, Intel Core 2 Duo
 
* Processors: Intel Centrino, Intel Core Duo, Intel Core 2 Duo
* Sound: Works with VoodooHDA.kext and AppleHDA.kext (D630 and D830 only)
+
* Sound: Works
 
* Wi-Fi: Works with Dell Wireless branded cards. Intel doesn't work. No exceptions.
 
* Wi-Fi: Works with Dell Wireless branded cards. Intel doesn't work. No exceptions.
* Graphics: Works w/ Intel GMA950, GMA X3100 and nVidia Quadro NVS cards
+
* Graphics: Works w/ Intel GMA945 and nVidia Quadro NVS card.
 
* Trackpad: Works with ApplePS2, VoodooPS2, Slice's Modified ApplePS2, and ANV-Slice Modified VoodooPS2 controllers.
 
* Trackpad: Works with ApplePS2, VoodooPS2, Slice's Modified ApplePS2, and ANV-Slice Modified VoodooPS2 controllers.
 
* USB: Works
 
* USB: Works
 
* Battery: VoodooBattery or AppleACPIBatteryMonitor
 
* Battery: VoodooBattery or AppleACPIBatteryMonitor
* Bluetooth: Works w/ Dell Wireless 350 and 360.
+
* Bluetooth: Works w/ Bluetooth 350 and 360
* Sleep: Works with NullCPUPowerManagement and SleepEnabler.kext.
+
* Sleep: Works with NullCPUPowerManagement and SleepEnabler.kext
 
* LAN: Works
 
* LAN: Works
 
* Dell Wireless 5520 HSDPA: Works with Novatel Drivers after firmware update [http://www.dc-files.com/files/novatel/modems/EU870D/] - Sets device & vendor IDs to Novatel's original
 
* Dell Wireless 5520 HSDPA: Works with Novatel Drivers after firmware update [http://www.dc-files.com/files/novatel/modems/EU870D/] - Sets device & vendor IDs to Novatel's original
 +
  
 
===Inspiron 1520===
 
===Inspiron 1520===
Line 847: Line 611:
 
*'''Shutdown/Reboot''' : Works.
 
*'''Shutdown/Reboot''' : Works.
 
*'''Kext Used''' : I will prepare a step-by-step installation guide with the kexts and packages required soon, please be patient.
 
*'''Kext Used''' : I will prepare a step-by-step installation guide with the kexts and packages required soon, please be patient.
 
===Inspiron E1505 / 6400===
 
{{QE|Y}}
 
*'''Install Method 1''' : IaTKOS S3 v2 (10.6.3) + rm AppleIntelGMA* + GMA950.pkg + 10.6.8 (Combo update)+ USB flash drive Install (QE was not working, Preview not working (why?))
 
*'''Install Method 2''' :  Retail 10.6.3 (Vanilla kernel) + 10.6.8 (Combo update) + external monitor + USB OSX with USB flash drive + GMA950.pkg
 
*'''Install Method 3''' : SnowLeoDVD.iso (10.6) + System software update (apple symbol/Software Update) + rm AppleIntelGMA* + GMA950-945-X3100Drivers.pkg + GMA950.pkg + USB flash drive install (using Core 2 Solo 1.86)
 
*'''CPU''' : Intel Core2Duo T5200 @ 1.6GHz - (Both Cores work with VoodooTSCSync)
 
*'''Graphic card''' : GMA950(27a2 rev3) -  QE/CI works. Monitor spanning works. (GMA950.pkg.zip + native AppleIntelIntegratedFrameBuffer.kext)
 
*'''DVD-RW''' : Optiarc DVD+-RW Generic Burn Support (not tested for burn)
 
*'''LAN''' : Broadcom 440X 10/100 - Works with BCM440X kext.
 
*'''Firewire''' : works, not tested
 
*'''Keyboard/Trackpad (2 Finger Scrolling)/Multimedia front keys''' : Works.
 
*'''Sound''' : Sigmatel 9200 : Works.
 
*'''Wireless''' : Dell Broadcom 4211 802.11 b/g works out of box.
 
*'''Bluetooth''' : no hardware present
 
*'''RICOH 3 in 1 Card Reader''' :  not tested
 
*'''Power management''' : sorta (Display sleep works. After closing lid, won't wake, but sometimes wakes after plugging or unplugging external. Will not wake from Sleep, at all. Tried SleepEneabler 10.6.8, doesn't work.)
 
*'''ShutDown/Reboot''' : Works.
 
*'''Kext/patch used''' : method 1: iATKOS S3 v2 + delete /S/L/E/AppleIntelGMA* + run GMA950.pkg (display works but no QE/QC)  method 2: (tough but recommended) iBoot Legacy + 10.6.3 vanilla + 10.6.8 comboupdate + delete delete /S/L/E/AppleIntelGMA* and run GMA950.pkg + do not delete stock Framebuffer for 27a2, VoodooTSCSync + KextBeast, BCM440kext,  Apple PS2 Controller + Voodoo PS2 synaptics trackpad + Voodoo keyboard, VoodooHDA, VoodooBattery. Custom options for initial vanilla install: unchecked languages etc., checked Rosetta
 
  
 
===Inspiron 640m / E1405===
 
===Inspiron 640m / E1405===
Line 890: Line 635:
 
===Vostro 1320===
 
===Vostro 1320===
 
{{QE|U}}
 
{{QE|U}}
*'''Install Method''' : Osx Snow Leopard 10.6.3 on USB bootable with Chameleon (terminal method) + Combo update 10.6.8
 
 
*'''Boot''' : Chameleon 1.4.1
 
*'''Boot''' : Chameleon 1.4.1
 
*'''CPU''' : Intel Core2Duo T6670 @ 2.20GHz  
 
*'''CPU''' : Intel Core2Duo T6670 @ 2.20GHz  
Line 898: Line 642:
 
*'''RAM''' : 4 GB DDR2 800MHZ
 
*'''RAM''' : 4 GB DDR2 800MHZ
 
*'''DVD''' : Optiarc DVD RW AD 7580 S
 
*'''DVD''' : Optiarc DVD RW AD 7580 S
*'''Audio''' : VoodooHDA 0.2.72 + Workaround Script for enhance sound
+
*'''Audio''' : VoodooHDA 0.2.72
*'''WLAN''' : Broadcom BCM 802.11 54G / Broadcom BCM 802.11 300N
+
*'''WLAN''' : Broadcom BCM 802.11 G
*'''Ethernet''' : Working
+
*'''Modem''' : Not Tested
+
*'''VGA''' : Working
+
*'''Card Reader''' : Not working
+
*'''Firewire''' : Not tested
+
*'''Express Card'' : Not tested
+
*'''Battery''' : No drivers installed
+
*'''Energy states''' : Suspend & Hibernate mode not working
+
*'''Keyboard''' : Some keys switched. Customized with Ukelele
+
*'''Touchpad''' : Working with minor precision
+
  
 
===Dell Precision M4500 (i7 version) ===
 
===Dell Precision M4500 (i7 version) ===
Line 931: Line 665:
 
*'''ShutDown/Reboot''' : Don't Work. Black screen but System "running"
 
*'''ShutDown/Reboot''' : Don't Work. Black screen but System "running"
 
*'''Kext used''' : None
 
*'''Kext used''' : None
 
===Precision M6300===
 
{{QE|Y}}
 
*'''Install Method''' : ModCD + Mac OS X Snow Leopard (retail) DVD + Combo update 10.6.8
 
*'''Install Method''' : ModCD + Mac OS X Snow Leopard (retail) on USB + Combo update 10.6.8
 
*'''Install Method''' : (sometimes won't complete install.) Mac OS X Snow Leopard (retail) + Combo update 10.6.8
 
*'''Boot''' :
 
*'''CPU''' : Intel Core2Duo @ 2.60GHz
 
*'''GPU''' : NVIDIA Quadro FX 1600M
 
*'''DVD-RW''' : Works
 
*'''Motherboard''' : Dell Inc. 0R235J
 
*'''RAM''' : 4 GB DDR2 800MHZ
 
*'''DVD''' :
 
*'''Audio''' :
 
*'''WLAN''' : Not working
 
*'''Ethernet''' : Working
 
*'''Modem''' :
 
*'''VGA''' : Working
 
*'''Card Reader''' : Not working
 
*'''Firewire''' :
 
*'''Express Card'' : Not tested
 
*'''Battery''' : No drivers installed
 
*'''Energy states''' :
 
*'''Keyboard''' : Working [Command = Alt] [Option = Windows]
 
*'''Touchpad''' : Working
 
 
==Fujitsu==
 
 
===LifeBook V1020===
 
 
{{QE|Y}}
 
*'''Install Method''' : iBoot Legacy 2.7.2 + Snow Leo Retail DVD 10.6.0 + ComboUpdate to 10.6.7 + ComboUpdate to 10.6.8
 
*'''CPU''' : Intel Core 2 Duo T5470 1.6Ghz
 
*'''Graphic card''' : Intel GMA X3100 144MB (Patched 3100FB.kext + PNLF in DSDT for working brightness, SwitchResX to inject correct EDID)
 
*'''RAM''' : 2 GB DDR2 667MHz
 
*'''Keyboard + Trackpad''' : Both work with ApplePS2Controller.kext in E/E
 
*'''Sound''' : Works with DSDT edit + AppleHDARollback + ALC268.kext
 
*'''Wireless''' : Atheros AR5BXB6, works OOTB
 
*'''Bluetooth''' : No Bluetooth
 
*'''SD Card Reader''' :  Works OOTB
 
*'''Power management''' : Doesn't wake from sleep, haven't attempted to fix
 
*'''ShutDown/Reboot''' : Works OOTB
 
*'''Kexts used''' : IOPCIFamily, AppleACPIPlatform & IO80211Monitor kexts from 10.6.7 had to be used to make 10.6.8 boot.
 
*'''DSDT''' : Applied all ICH8 Notebook patches included with El Coniglio's DSDT editor + fixes for ALC268 and brightness control
 
 
===Celsius H240===
 
{{QE|Y}}
 
*'''Install Method''' : iAtkos 6.3
 
*'''CPU''' : Intel Core 2 Duo T7200 2.0Ghz
 
*'''Graphic card''' : Mobility FireGL V5200 (works on VGA+HDMI, not yet on LCD) patched ATI1600cotroller and ATIRadeon X1000 patched with device ID, Replaced "alopias" by "wormy" in ATIframebuffer
 
*'''RAM''' : 2 GB DDR2 667MHz
 
*'''Keyboard + Trackpad''' : Both work with ApplePS2Controller.kext in E/E
 
*'''Sound''' : Works with crackles with VoodooHDA
 
*'''Wireless''' : Intel: does not work
 
*'''Bluetooth''' : No Bluetooth
 
*'''SD Card Reader''' :  does not work
 
*'''Power management''' : Sleeps well (me too)
 
*'''ShutDown/Reboot''' : Works OOTB
 
*'''Kexts used''' :AppleACPIPS2Nub/Disabler/ElliottForceLegacyRTC/EvOReboot/Fakesmc/VoodooPScontroller/VoodooHDA(patched with device ID)
 
*'''DSDT''' : not tweaked
 
  
 
==Hewlett Packard==
 
==Hewlett Packard==
 
===HP 530 Celeron M===
 
 
* '''Install Method''': Boot-123 with 10.6.0 Retail Disc, Installed Combo Updated to 10.6.8
 
* '''Processor''': Intel Celeron M 410, 1.47GHz, recognized as a Core Solo, works fine. Note boots must be arch=i386, this is a 32-bit processor.
 
* '''Audio''': Used Voodoo 0.2.72, speakers work, headphone jack works, microphone untested.
 
* '''LAN''': Not Working - It's an Intel ProV/100; it functioned under Leopard, still looking for a kext.
 
* '''WiFi''': Natively recognized in 10.6.8 as an AirPort card. The WiFi card is a Broadcom BCM4311.
 
* '''Video''': Intel Mobile GMA 950 - Worked OOB, even from the install DVD, never needed to add kexts. Full Graphics Acceleration. VGA out port causes system freeze. Do not use.
 
* '''Keyboard''': Used PS/2 Fix. Alt keys are seen as "Command" and Fn brightness and audio work.
 
* '''Touchpad''': Recognized with the PS/2 fix as a Synaptics 6.3, 2 finger scrolling enabled by default.
 
* '''Battery''': Untested, this computer's battery is fried, though I have gotten an indicator with VooDoo Battery before.
 
* '''SATA''': Working by default. JmicronxATA doesn't seem to do anything, but it works.
 
* '''USB''': No USB at the moment, might need DSDT fix. Boot flags do not work.
 
* '''DVD-RW''': Reading of CDs and DVDs work, writes untested.
 
  
 
=== HP G50-112NR (Compaq CQ50) ===
 
=== HP G50-112NR (Compaq CQ50) ===
Line 1,096: Line 755:
  
  
===HP [http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01566761&lc=en&dlc=en&cc=us&product=3795282&lang=en DV3510NR]===
+
===HP DV3510NR===
  
 
*'''Install Method''': iBoot Legacy (safe mode) + SL 10.6, 10.6.8 ComboUpdate then EasyBeast (MultiBest.app)
 
*'''Install Method''': iBoot Legacy (safe mode) + SL 10.6, 10.6.8 ComboUpdate then EasyBeast (MultiBest.app)
**'''I didn't realized there was a guide but all the [http://www.insanelymac.com/forum/topic/155318-guide-hp-pavilion-dv3540es-3500-series-leopard-retail-1058/ links] were taken down
+
*MultiBest: EasyBeast, System Rebuild, PS2 kb&TrackPad
*'''MultiBest''': EasyBeast, System Rebuild, IOUSBFamily Rollback
+
*'''CPU''': P7350 2.0ghz - both cores work
*'''BootLoderr''': chimera 1.9.1
+
*'''CPU''': P7350 2.0ghz - both cores works but temperature is''' FREAKING HIGH 72-75 averages'''
+
 
*'''Video''': Nvidia 9300M GS works oob
 
*'''Video''': Nvidia 9300M GS works oob
*'''Audio''': for volume controls [http://www.insanelymac.com/forum/index.php?showtopic=183321 VoodooMod.zip] [http://www.mediafire.com/?ide7fvcsa4yol link2] [http://www.mediafire.com/?boitnszofeuvaaf link3]
+
*'''Audio''' - Fully works. Internal and external speakers and microphone fully work.  
*'''WIFI''': wifi card is whitelist, you needs to go back into windows then flash w/custom bios [http://www.insanelymac.com/forum/index.php?showtopic=153559&st=0&p=1204172&#entry1204172 link] [http://www.mediafire.com/?oc49cj55l215tv0 link2]
+
Internal mouse and keyboard - need PS2FixKeyboard.pkg to work if you are using a retail distribution.  
*'''USB''': add this string to your boot plist (again IOUSBFamily Rollback whenever you made changes);
+
*'''WIFI''': Nope
**USBBusFix=Yes > Enable All USB Fixes less EHCIhard (for USB devices) [http://www.osx86.net/guides-tutorials/10747-guide-chameleon-bootloader-basics.html link]
+
*'''USB''': Works oob.  
*'''Keyboard & TrackPad''': better kexts [http://www.mediafire.com/?gi2l8owlh8szk6c link]
+
*'''Battery''': voodoo battery [http://www.mediafire.com/?3mm39zoolm88u3p link]
+
 
*'''Bluetooth''': Works oob.  
 
*'''Bluetooth''': Works oob.  
 
*'''Webcam''': Works oob.  
 
*'''Webcam''': Works oob.  
 
*'''Chipset''': Recognized.  
 
*'''Chipset''': Recognized.  
*'''Restart+Shutdown''': works but it takes a little more time i though it was going to hang.
+
*'''Speedstep''' - Works.
 +
*'''Restart+Shutdown''': Works.  
 
*'''Ethernet''': Works oob.  
 
*'''Ethernet''': Works oob.  
*'''Battery Management''': nop.  
+
*'''Battery Management''': Works.  
 
*'''HDMI''' - not tested.  
 
*'''HDMI''' - not tested.  
 
*'''Card Reader''': not tested.  
 
*'''Card Reader''': not tested.  
*'''Sleep''' - Nope
+
*'''Sleep''' - Goes into sleep, but does not wake up.
 
*'''Validity Fingerprint Reader''' - Does not work.  
 
*'''Validity Fingerprint Reader''' - Does not work.  
 
*'''Brightness Controls''' - Do not work.  
 
*'''Brightness Controls''' - Do not work.  
 
*'''Infrared Receiver''' - Does not work.
 
*'''Infrared Receiver''' - Does not work.
<pre>if the left USB slot isn't working, then Webcam isn't working. a couple reboots will fix it</pre>
 
<br>
 
  
 
=== HP DV8000 (DV8404us) ===
 
=== HP DV8000 (DV8404us) ===
Line 1,236: Line 890:
 
* '''SATA''': Works with TRIM for SSD's
 
* '''SATA''': Works with TRIM for SSD's
 
* '''USB''': Works and so does the one (1) USB 3.0 Port
 
* '''USB''': Works and so does the one (1) USB 3.0 Port
 
=== HP 6910p ===
 
myHack method ,,, 1-create myHack USB ,,, 2-remove the extra folder from the USB ,,, 3-put the one in the link below (If U Have The Same Specs) ,,, (((unfortunately myHack chameleon boot-loader is a little old and has some problems loading GMA X3100 and some other kext so u'll have to replace the boot-loader on the USB with one newer )))
 
 
Follow this to replace the boot-loader ,,, 1-use chameleon wizard ,,, 2-choose ur USB stick from the choices below ,,, 3-choose update boot-loader ,,, 4-install chameleon boot-loader 2255 or 2263
 
 
5-open myHack app >> choose myFix >> choose ur myHack USB stick >> Full
 
 
in the process of installing OSX when myHack prompt u for the Extra folder choose (My Own) and then choose the one on ur myHack USB ,,, after u install OSX do NOT use the boot-loader on the Hard-disk that myHack installed it ,,, Use the USB boot-loader to boot into ur new OSX installation
 
 
My Extra Folder used in myHack USB and the OS partition
 
(Use It If U Have The Same Specs)
 
http://www.mediafire.com/?g0ha793cp4zy713
 
 
Kext in E\E
 
ACPISensors.kext , AppleACPIPS2Nub.kext , ApplePS2Controller.kext , FakeSMC.kext , Intel82566MM.kext , IntelCPUMonitor.kext , lspcidrv.kext , NullCPUPowerManagement.kext , Patched_10.7_AppleRTC.kext , X3100.kext
 
 
(( i use some extra kext to read hardware temps -- with these kext u must use HWmonitor 609 from http://www.projectosx.com/forum/index.php?act=attach&type=post&id=4364))
 
 
Kext in S\L\E  (( put it in S\L\E after the OSX install ))
 
VoodooHDA.kext (must remove AppleHDA first)
 
http://www.mediafire.com/?f9gpa9nd8c419wz
 
 
Used Patched DSDT & SSDT
 
 
SMBios as MacBook3,1
 
 
    {| class="wikitable" width=100%
 
    !Hardware Name
 
    !Chipset
 
    !Notes
 
    !Patches Used
 
    !colspan=2| 32/64bit working ''with'' patches
 
    |-
 
    |'''Processor'''
 
    |Intel Core2 Duo T7300 2GHz/4M
 
    |Working
 
    |
 
    |{{Y}}
 
    |{{Y}}
 
    |-
 
    |'''Chipset'''
 
    |Intel GM965
 
    |Working
 
    |
 
    |{{Y}}
 
    |{{Y}}
 
    |-
 
    |'''Graphics Card'''
 
    |Intel GMA X3100
 
    |Working
 
    |
 
    |{{Y}}
 
    |{{N}}
 
    |-
 
    |'''Audio'''
 
    |Analog Devices AD1981HD
 
    |Working
 
    |VoodooHDA.kext 2.8.1
 
    |{{Y}}
 
    |{{Y}}
 
    |-
 
    |'''LAN'''
 
    |Intel(R) 82566MM
 
    |Working
 
    |Intel82566MM.kext
 
    |{{Y}}
 
    |{{Y}}
 
    |-
 
    |'''Wifi'''
 
    |Intel(R) Wireless WiFi Link 4965AG
 
    |Not Working
 
    |
 
    |{{N}}
 
    |{{N}}
 
    |-
 
    |'''USB'''
 
    |3 USB @ Intel(R) ICH8
 
    |Working
 
    |DSDT EHCI Patch
 
    |{{Y}}
 
    |{{Y}}
 
    |-
 
    |'''TrackPad'''
 
    |Synaptics PS/2 Port TouchPad
 
    |Working
 
    |AppleACPIPS2Nub.kext & ApplePS2Controller.kext
 
    |{{Y}}
 
    |{{Y}}
 
    |-
 
    |'''Keyboard'''
 
    |Default
 
    |Working
 
    |AppleACPIPS2Nub.kext & ApplePS2Controller.kext
 
    |{{Y}}
 
    |{{Y}}
 
    |-
 
    |'''FireWire'''
 
    |
 
    |Working
 
    |
 
    |{{Y}}
 
    |{{Y}}
 
    |-
 
    |'''Bluetooth'''
 
    |HP Integrated Module Broadcom
 
    |Working
 
    |
 
    |{{Y}}
 
    |{{Y}}
 
    |-
 
    |'''Card Reader'''
 
    |
 
    |Not Working
 
    |
 
    |{{N}}
 
    |{{N}}
 
    |-
 
    |}
 
  
 
==Lenovo==
 
==Lenovo==
 
=== Ideapad Y550P ===
 
{{QE|Y}}
 
* Retail Snow Leopard DVD 10.6, updated to 10.6.8 with combo update
 
* Multibeast 3.1.1, EasyBeast installation using Chimera bootloader v1.4.1 r877
 
* Install bootup and first bootup require safe-mode "PCIRootUID=1 -x"
 
* To enable usb ports after install boot with "PCIRootUID=1"
 
* After combo update to 10.6.8 run multibeast with easybeast and both voodoo PS/2 options selected. If you skip this, you won't have a working keyboard or mouse after you reboot. External USB keyboard & mouse work.
 
 
* CPU: i7-820QM @ 1.73Ghz - 3.06Ghz, 4GB RAM
 
*'''Graphics:''' NVIDIA GeForce GT 240M with 1GB DDR3 Dedicated VRAM Yes Out of Box
 
*'''Audio:''' Yes (VoodooHDA.kext)
 
*'''Wifi:''' No (replaced with Atheros AR5B93)
 
*'''USB:''' Yes
 
*'''Ethernet:'''  Yes (BCM57780Ethernet.kext)
 
*'''Trackpad:''' Synaptics Touchpad Yes (Voodoo PS/2 Touchpad) (no multitouch)
 
*'''Sleep:''' No
 
*'''Webcam:''' Worked Yes Out of Box.
 
*'''Battery monitoring:''' No
 
  
 
=== S12-2959 ION (Nvidia) ===
 
=== S12-2959 ION (Nvidia) ===
Line 1,474: Line 990:
 
*Bluetooth
 
*Bluetooth
 
*Modem
 
*Modem
 
=== Thinkpad T60 (2007-66U) 14.1" NON-Widescreen ===
 
{{QE|Y}}
 
*'''Install Method:''' iBoot 3.2.0 + Mac OS X 10.6.3 Retail DVD + Multibeast 3.10.1
 
*'''CPU:''': Core Duo T2500 2.0 GHz (NOT a Core2Duo, NOT 64 bit capable)
 
*'''SATA Hard Disk:''' (ICH9 Family) Yes Out of Box
 
*'''SATA DVD+/-RW:''' (ICH9 Family) Yes Out of Box
 
*'''Graphics:''' ATI X1400 Radeon Mobility *works, add 0x71451002 to ATIRadeonX1000.kext
 
*'''Audio:''' Yes (VoodooHDA 2.1)
 
*'''Wifi:''' Yes Out Of Box †
 
*'''USB:''' Yes
 
*'''Bluetooth:''' Yes Out Of Box
 
*'''Ethernet:''' Yes Out Of Box
 
*'''Trackpad:''' Synaptics Touchpad Yes (Voodoo PS/2 Touchpad)
 
*'''Sleep:''' Yes, S1 sleep works
 
*'''†:''' Had to flash a modified BIOS 2.27 (NOT 1.19! The widescreen and non-widescreen BIOSes are not compatible) with the Whitelist removed.  Replaced Intel 3945ABG with "Airport" Rebranded Broadcom BCM4311MCG
 
 
* '''Install Method:'''
 
** 1) Boot with iBoot and install 10.6.3 make sure to always boot with arch=i386
 
** 2) Once installed, update to Combo Update '''10.6.7''', followed by EasyBeast with Multibeast.  Edit /Extra/org.chameleon.Boot.plist and remove the GraphicsEnabler=Yes section. Reboot.
 
** 3) Copy AppleACPIPlatform.kext, IOGraphicsFamily.kext, IONDRVSupport.kext and IOPCIFamily.kext from 10.6.7 to desktop.
 
** 4) Install Combo Update 10.6.8.  Before reboot, reinstall the four 10.6.7 kexts mentioned and run Multibeast selecting EasyBeast and VoodooHDA 2.1.  Repair permissions.  Remove GraphicsEnabler=Yes from your boot.plist again.  Reboot, make sure to boot with -f or else you'll probably encounter a kernel panic.
 
** 5) To enable QE/CI and resolution change, add 0x71451002 to /System/Library/Extensions/ATIRadeonX1000.kext/Contents/Info.plist and install RadeonHD.kext.  Repair permissions and reboot.
 
** 6) You will now have a 100% functional T60.  You can do a few things to tweak performance like extracting your EDID information and injecting it into RadeonHD.kext (helps reduce the mouse tearing problem but DOES NOT fix it), and you can edit your smbios.plist and AGPM.kext to improve power management slightly.
 
 
My boot.plist
 
<?xml version="1.0" encoding="UTF-8"?>
 
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 
<plist version="1.0">
 
<dict>
 
<key>EthernetBuiltIn</key>
 
<string>Yes</string>
 
<key>Kernel</key>
 
<string>mach_kernel</string>
 
<key>Graphics Mode</key>
 
<string>1400x1050x32</string>
 
<key>Kernel Flags</key>
 
<string>arch=i386 npci=0x2000 cpus=1 PCIRootUID=1</string>
 
<key>Legacy Logo</key>
 
<string>Yes</string>
 
<key>Quiet Boot</key>
 
<string>Yes</string>
 
<key>Boot Banner</key>
 
<string>No</string>
 
<key>Timeout</key>
 
<string>0</string>
 
<key>UseKernelCache</key>
 
<string>Yes</string>
 
</dict>
 
</plist>
 
 
My smbios.plist
 
 
<?xml version="1.0" encoding="UTF-8"?>
 
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 
<plist version="1.0">
 
<dict>
 
<key>SMbiosdate</key>
 
<string>10/12/06</string>
 
<key>SMbiosvendor</key>
 
<string>Apple Computer, Inc.</string>
 
<key>SMbiosversion</key>
 
<string>MBP11.88Z.0055.B08.0610121325</string>
 
<key>SMboardproduct</key>
 
<string>Mac-F425BEC8</string>
 
<key>SMfamily</key>
 
<string>MacBook</string>
 
<key>SMmanufacturer</key>
 
<string>Apple Computer, Inc.</string>
 
<key>SMproductname</key>
 
<string>MacBook4,1,Black</string>
 
<key>SMserial</key>
 
<string>CK847210XYL</string>
 
<key>SMsystemversion</key>
 
<string>1.0</string>
 
</dict>
 
</plist>
 
  
 
=== Thinkpad T61 (8895-2FG) ===
 
=== Thinkpad T61 (8895-2FG) ===
Line 1,699: Line 1,138:
 
*WiFi: Atheros 9285 - works with LegacyAtheros
 
*WiFi: Atheros 9285 - works with LegacyAtheros
 
*PowerManagment - works OOTB
 
*PowerManagment - works OOTB
 
===Sony VAIO VGN-NR31SR ===
 
 
Hazard 10.6.6 installed. With other distributions, either internal PS/2 keyboard doesn't work, or the video hangs up, or nothing boots at all.
 
When installing, select only Chameleon RC5 and VoodooHDA, otherwise there will be problems with one thing or another.
 
 
* Video: Nvidia 8400M GT: works out of the box with 1024x768, full resolution is enabled with Chameleon "Graphics Mode" parameter. Acceleration doesn't work, tried NVEnabler but no luck. It is said that Vaio only supports acceleration on external displays. I didn't try too hard, trusted the internets.
 
* Audio: works with VoodooHDA (installed with Hazard, latest driver version from the available ones). Didn't try the mic.
 
* WiFi: internal doesn't work. Just bought an USB one (D-Link with an Ralink chipset, but see the notes on [[HCL_10.6.8#Wireless]]).
 
* USB: seems to work ok right after installation.
 
  
 
==Toshiba==
 
==Toshiba==
=== Satellite A100-811 ===
 
{{QE|Y}}
 
{| class="wikitable" width="100%"
 
!Parts
 
!Device
 
!Working
 
!Notes
 
|-
 
|'''Processor'''
 
|Intel Core 2 Duo T5600 (1.83 GHz)
 
|Yes
 
|Out the Box
 
|-
 
|'''SATA'''
 
|Hard Disk (ICH8 Family)
 
|Yes
 
|Out the Box
 
|-
 
|'''PATA'''
 
|DVD+/-RW (ICH8 Family)
 
|Yes
 
|Out the Box
 
|-
 
|'''Graphics'''
 
|Intel GMA950
 
|Yes
 
|Out the box, but need DSDT patch for Laptop. Works only for 32 bit mode. 64 bit - not working (only one resolution). Install with an external monitor.
 
|-
 
|'''Audio'''
 
|AC97 HDA (ALC861)
 
|Yes
 
|[http://code.google.com/p/voodoohda/downloads/list VoodooHDA.kext] (S/L/E)
 
|-
 
|'''Wireless'''
 
|3945ABG b/g
 
|No
 
|
 
|-
 
|'''USB'''
 
|ICH8M Family
 
|Yes
 
|Out the Box
 
|-
 
|'''Ethernet'''
 
|Intel PRO 100 VE (0x10928086)
 
|Yes
 
|IONetworkingFamily.kext (with modifying AppleIntel8255x.kext) + delete AppleHPET.kext
 
|-
 
|'''Battery'''
 
|Integrated
 
|Yes (not testing)
 
|[http://forum.voodooprojects.org/index.php/topic,1092.0.html VoodooBattery.kext] (32/64 bits)
 
|-
 
|'''FireWire'''
 
|TI PCIxx12 OHCI Compliant IEEE 1394 Host Controller
 
|Yes (not testing)
 
|Out the Box
 
|-
 
|'''Bluetooth'''
 
|Toshiba
 
|Yes
 
|[http://www.insanelymac.com/forum/index.php?showtopic=156596 ToshibaBluetooth.kext] - [http://www.insanelymac.com/forum/index.php?s=9de477b75d363359461615bba6da6154&act=attach&type=post&id=46257 x32 version], install only in the S/L/E
 
|-
 
|-
 
|'''Card Reader'''
 
|Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
 
|Partially (not tested)
 
|VoodooSDHCI.kext (32/64 bits)
 
|-
 
|'''Touchpad'''
 
|Integrated PS/2
 
|Yes
 
|[http://forum.voodooprojects.org/index.php/topic,235.0.html VoodooPS2Controller.pkg] (can be installed in /Extra/Extensions/ folder)
 
|-
 
|'''Modem'''
 
|Integrated
 
|No
 
|I´m not using it.
 
|-
 
|}
 
 
Install method: External Monitor + Legacy Boot CD + Mac OSX Snow Leopard 10.6.3 Retail + [http://support.apple.com/downloads/DL1324/en_US/MacOSXUpdCombo10.6.5.dmg Combo Update 10.6.5] + [http://support.apple.com/downloads/DL1349/en_US/MacOSXUpdCombo10.6.6.dmg Combo Update 10.6.6]
 
 
Notes:
 
IONetworkingFamily.kext must be installed in S/L/E (not in the /Extra/Extensions), same VoodooHDA, ToshibaBluetooth. VoodooPS2 can be installed in /Extra.
 
For solving problem with Cable Unplugged (ethernet) - delete AppleHPET.kext (S/L/E).
 
 
Other kexts (/Extra/Extensions/):
 
*EvOreboot.kext
 
*fakesmc.kext
 
*JMicron36xATA.kext
 
*JMicron36xSATA.kext
 
*LegacyAppleRTC.kext
 
*NullCPUPowerManagement.kext
 
Troubles: 64bit mode doesn't work.
 
 
 
===Satellite A135-S4527===
 
===Satellite A135-S4527===
  
 
*Install Method: iBoot Legacy 2.7.2 + 10.6 then 10.6.8 ComboUpdate
 
*Install Method: iBoot Legacy 2.7.2 + 10.6 then 10.6.8 ComboUpdate
*MB: EB, system utilies, Chimera, VoodooHDA 0.2.7.2
+
*MultiBeast: Easybeast, system utilies, Chimera, VoodooHDA 0.2.7.2
 
*Intel Dual Core T2080 (1.73 GHz): Out the Box, detected as Core Duo 1.73 GHz
 
*Intel Dual Core T2080 (1.73 GHz): Out the Box, detected as Core Duo 1.73 GHz
 
*Video: Intel GMA 950 works oob {{QE|Y}}
 
*Video: Intel GMA 950 works oob {{QE|Y}}
Line 1,831: Line 1,164:
 
laptop needs to restart once for the cpu fan spinning before ready for operation.
 
laptop needs to restart once for the cpu fan spinning before ready for operation.
 
</pre>
 
</pre>
 
=== Satellite A300-1G3 ===
 
Installation method: iATKOS S3 v2 + Combo Update 10.6.8 with USB and ACPI/PCI fixes
 
{{QE/CI|Y}}
 
{| class="wikitable" width="100%"
 
!Parts
 
!Device
 
!Working
 
!Notes
 
|-
 
|'''Processor'''
 
|Intel Core 2 Duo T5850 (2.16 GHz)
 
|Yes
 
|Out of the box
 
|-
 
|'''SATA'''
 
|Hard Disk (ICH8 Family)
 
|Yes
 
|Out of the box
 
|-
 
|'''PATA'''
 
|DVD+/-RW (ICH8 Family)
 
|Yes
 
|Out of the box
 
|-
 
|'''Graphics'''
 
|Intel GMA X3100
 
|Yes
 
|Out of the box, works only in 32-bits mode (boot with arch=i386 argument in Chameleon/Chimera)
 
|-
 
|'''Audio'''
 
|HDA
 
|Yes
 
|Out of the box
 
|-
 
|'''Wireless'''
 
|3945ABG b/g
 
|No
 
|I've replaced original 3945 with Atheros AR9285 and installed AR9285 kext, works fine as Airport.
 
|-
 
|'''USB'''
 
|ICH8M Family
 
|Yes
 
|Out of the box (After update to 10.6.8 you'll need to install USB fixes and boot with USBBusFix=Yes argument in Chameleon/Chimera)
 
|-
 
|'''Ethernet'''
 
|Realtek RTL8169 Fast Ethernet Controller
 
|Yes
 
|Install RTGNIC v.2.0.6 package, reboot, go into Apple Menu->System Preference->Network and configure your adapter, and you're good to go. (Note: this package also supports 8169S(SB)/8168(B/C/CP/D/E/F)/8101E/8102E/8103E/8105E network cards)
 
|-
 
|'''Battery'''
 
|Integrated
 
|Yes
 
|VoodooBattery.kext
 
|-
 
|'''FireWire'''
 
|TI PCIxx12 OHCI Compliant IEEE 1394 Host Controller
 
|Yes
 
|Out of the box
 
|-
 
|'''Card Reader'''
 
|Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
 
|Not tested
 
|
 
|-
 
|'''Touchpad'''
 
|Integrated PS/2
 
|Yes
 
|VoodooPS2Controller.kext
 
|-
 
|'''Modem'''
 
|Integrated
 
|No
 
|I´m not using it.
 
|-
 
|}
 
  
 
===Satellite A300-1EC===
 
===Satellite A300-1EC===
Line 2,016: Line 1,273:
 
Mac OS X is completely useable if you have an external mouse and a wired Internet connection. I am still trying to find out how to get the Wireless, Sound, Touchpad and resolution fixed and I will update here once I find a way.
 
Mac OS X is completely useable if you have an external mouse and a wired Internet connection. I am still trying to find out how to get the Wireless, Sound, Touchpad and resolution fixed and I will update here once I find a way.
  
 
===Satellite A205-S5000===
 
{{QE|Y}}
 
*See HCL 10.6.3 for base install instructions
 
*Before beginning, remove VoodooHDA.kext. It will cause a kernel panic after update.
 
*Install Combo Update 10.6.8 from Apple website
 
*DO NOT RESTART YET! IT WILL NOT BOOT!!
 
*Install these kexts: http://www.mediafire.com/download.php?1lvne3rnj1spuhe
 
*If using a Celeron processor, install this kernel: http://www.mediafire.com/?4g10h4t71fb73tz
 
*Restart the computer. You should boot successfully into Mac OS X 10.6.8.
 
*To get your audio working again, use this version of VoodooHDA.kext: http://www.mediafire.com/?yjfxbhd2b2kr40t
 
*You can install the PrefPane file if you want. It is not necessary.
 
*Be sure to set permissions correctly on kexts.
 
  
 
===Satellite L635===
 
===Satellite L635===
Line 2,045: Line 1,289:
  
 
===Satellite L650-078===
 
===Satellite L650-078===
* Install Method: iBoot Legacy 2.7.2 + Retail 10.6.0 DVD.  MB + Combo Update 10.6.8
+
* Install Method: iBoot Legacy 2.7.2 + Retail 10.6.0 DVD.  MultiBeast + Combo Update 10.6.8
 
* Processor: Core i3 M350 (@2.27)
 
* Processor: Core i3 M350 (@2.27)
 
* Audio: Conexant CX20671 (14F1:5069) - works with VoodooHDA (HDAEnabler kexts seem to cause a Kernel Panic)
 
* Audio: Conexant CX20671 (14F1:5069) - works with VoodooHDA (HDAEnabler kexts seem to cause a Kernel Panic)
Line 2,060: Line 1,304:
 
*# Remove IOPlatformPluginFamily.kext from /System/Library/Extensions/ (this is so that the combo update won't panic and kill your install).
 
*# Remove IOPlatformPluginFamily.kext from /System/Library/Extensions/ (this is so that the combo update won't panic and kill your install).
 
*# Reboot - usual flags "-v -x GraphicsEnabler=No"
 
*# Reboot - usual flags "-v -x GraphicsEnabler=No"
*# Launch the MB installer and proceed to the install options screen - but DO NOT actually click install yet.
+
*# Launch the MultiBeast installer and proceed to the install options screen - but DO NOT actually click install yet.
 
*# Run combo updater but DO NOT click the restart button when finished (if you do you need to go back to step one and begin again).
 
*# Run combo updater but DO NOT click the restart button when finished (if you do you need to go back to step one and begin again).
*# Flick back to MB and click the Install button now.  When complete allow the Combo update to restart.
+
*# Flick back to MultiBeast and click the Install button now.  When complete allow the Combo update to restart.
 
*# You know what to type now... but we shall soon avoid needing to do that.
 
*# You know what to type now... but we shall soon avoid needing to do that.
 
*# Install Chameleon (use the installer package and then update files manually if you really want).  Edit the /Extras/org.chameleon.Boot.plist file and add in our Kernel Flags in the appropriate places (there are guides out there to help with flags).  From this point on safe mode (-x) doesn't seem needed, but GraphicsEnabler=No is a MUST.
 
*# Install Chameleon (use the installer package and then update files manually if you really want).  Edit the /Extras/org.chameleon.Boot.plist file and add in our Kernel Flags in the appropriate places (there are guides out there to help with flags).  From this point on safe mode (-x) doesn't seem needed, but GraphicsEnabler=No is a MUST.
Line 2,076: Line 1,320:
  
  
* Install Method: iATKos with Mac OS X version 10.6.3 then updated to 10.6.6 with Apple combo update. After updating to 10.6.6 and after flash don't work in any web browser and safari and appstore glitch alot but everything works great, re-install kexts for wifi and vga cards and perfect again.
+
* Install Method: iATKos with Mac OS X version 10.6.3 then updated to 10.6.6 with Apple combo update. After updateing to 10.6.6 and after flash don't work in any web browser and safari and appstore glitch alot but everything works great, re-install kexts for wifi and vga cards and perfect again.
  
 
* Changed bootloader to Chameleon RC2   
 
* Changed bootloader to Chameleon RC2   
Line 2,104: Line 1,348:
  
 
*'''BIOS''': 2.20
 
*'''BIOS''': 2.20
*'''Install Method''': iBoot + 10.6.0 Retail Snow Leopard DVD (use arch=i386) + 10.6.8 (Combo update) + MB (did not use EB or UserDSDT, instead used a-la-carte method)
+
*'''Install Method''': iBoot + 10.6.0 Retail Snow Leopard DVD (use arch=i386) + 10.6.8 (Combo update) + MultiBeast (did not use EasyBeast or UserDSDT, instead used a-la-carte method)
 
*'''OsX Version''': Retail/Vanilla Kernel 10.6.8 (32-Bit) - Chameleon 2.0 RC5 Bootloader
 
*'''OsX Version''': Retail/Vanilla Kernel 10.6.8 (32-Bit) - Chameleon 2.0 RC5 Bootloader
 
*'''CPU''': Intel Core2Duo T3400 @ 2.16GHz, 1MB L2, 667MHz FSB, Intel GL40 Express Chipset
 
*'''CPU''': Intel Core2Duo T3400 @ 2.16GHz, 1MB L2, 667MHz FSB, Intel GL40 Express Chipset
Line 2,119: Line 1,363:
 
*'''ShutDown/Reboot''': Works
 
*'''ShutDown/Reboot''': Works
 
*'''Battery Indicator''': Works with Voodoo Battery kext
 
*'''Battery Indicator''': Works with Voodoo Battery kext
*'''Kexts/MB settings used''': VoodooHDA 0.2.72; FakeSMC; FakeSMC Motherboard Plugins; NullCPUPowerManagement; Voodoo PS/2 Controller; Voodoo Trackpad; Chimera v1.5.4 r1394; 32-bit Apple Boot Screen; Voodoo Battery
+
*'''Kexts/MultiBeast settings used''': VoodooHDA 0.2.72; FakeSMC; FakeSMC Motherboard Plugins; NullCPUPowerManagement; Voodoo PS/2 Controller; Voodoo Trackpad; Chimera v1.5.4 r1394; 32-bit Apple Boot Screen; Voodoo Battery
  
 
===Qosmio X505-Q885===
 
===Qosmio X505-Q885===
Line 2,140: Line 1,384:
 
===Qosmio X505-Q870===
 
===Qosmio X505-Q870===
  
*'''Install Method''': TonyMAc iboot 3.2.0 + Mb 3.10.1
+
*'''Install Method''': TonyMAc iboot 3.2.0 + Multibeast 3.10.1 [http://tonymacx86.blogspot.com/2010/04/iboot-multibeast-install-mac-os-x-on.html click here to download iboot and Multibeast and install instructions.]
 
*'''OSX Version''': 10.6.8 Retail Snow Leopard DVD
 
*'''OSX Version''': 10.6.8 Retail Snow Leopard DVD
 
*'''CPU''': Intel i7  
 
*'''CPU''': Intel i7  
Line 2,154: Line 1,398:
 
*'''Audio''': works with VoodooHDA
 
*'''Audio''': works with VoodooHDA
  
===Satellite L755D-S5150===
+
==MSI==
 
+
* Install Method: iAtkos S3 v3(busratio=19 -f -v)
+
* Chipset: AMD K12 Bridge ; A55/A60M
+
* Processor: AMD A4-3305M
+
* Audio: Conexant SmartAudio HD(Currently not working); Ati HD Audio(Currently not working)
+
* INPUT: Synaptics PS/2 Port(Voodoo PS/2, Working with multi-touch)
+
* LAN: Atheros AR8152/8158(WOB)
+
* WLAN: REALTEK RTL 8188CE(Currently not working)
+
* Video: Radeon HD 6480G(Only at 1024x768)
+
* SATA & IDE: AHCI SATA
+
*# Install very straight forward.  Select all pertaining to AMD
+
 
+
===Toshiba Satellite L40-15G===
+
 
+
*Install Method  iAtkos S3 V3 (put on bios legacy usb off)
+
When installing iATKOS S3 V2, be sure to check the following customizations:
+
 
+
""iATKOS S3 Main System""
+
 
+
'''Bootloader'''
+
""Bootloader Options""
+
*32-Bit boot
+
'''Patches'''
+
* Keep the checked options but add the following:
+
'''Drivers - Main Hardware'''
+
* SATA/IDE: INTEL SATA/IDE
+
* Sound: Voodoo HDA
+
* PS/2: Apple PS/2
+
* CPU Power Manager: Voodoo P-State
+
* Laptop Hardware: Battery, Card Reader
+
* NTFS-3G: selected if u have ntfs partitions
+
* VGA: INTEL, EFI string, Natit, GMA x3100, Framebuffer
+
* Network: Wired= Realtek 8139
+
* Network: Wireless= Realtek 8187B
+
 
+
After to make wireless work delete RTL8187B* kext and use the one from here http://www.osx86.net/downloads.php?do=file&id=2002&act=down&actionhash=1349991210-508ec848abcc14ec02c978b232067809944f6eea
+
Update to 10.6.7 , after usb not working, so to fix i installed usb kexts from here http://www.sysprobs.com/wp-content/uploads/IOUSBFamily-378.pkg.zip
+
Update to 10.6.8 , after pci problem will panic boot, to avoid it use combo update 10.6.8 downloaded from Apple instead of update direct from laptop, after combo update install use alt+option+escape to avoid rebooting and replace the pci kext with the ones from this link http://www.osx86.net/downloads.php?do=file&id=1481&act=down&actionhash=1349806028-efb142fc3b7ab97bd03a994b1bf64ae04770595e and replaced only IOUSBMassStorageClass.kext on Extensions from here http://code.google.com/p/project-osx86/downloads/detail?name=IOUSB10.6.3.zip , all workin after
+
 
+
Hardware all workin
+
*Technology/Processor: Mobile Technology Intel® Pentium® Dual-Core 2310, (1.46 GHz), 533 Mhz Front Side Bus, 1 MB level 2 cache, Intel® GL960 chipset  ok
+
*Optical Drive: DVD Super-Multi Double Layer (all recording formats: DVD-R/RW, +-R(DL)/+RW and DVD-RAM) ok
+
*Graphics: Adapter Intel® GMA X3100 (up to 256MB shared)  ok
+
*Communications: 10/100 Base-TX, Ethernet LAN, RJ-45 realterk 8193 ok
+
*Communications: Realtek 802.11(b/g) 13ch-RTL8187B ok
+
*usb ports x 3 ok
+
*apple software installed all workin
+
 
+
=MSI==
+
 
===MSI EX600X-415HU===
 
===MSI EX600X-415HU===
 
{{QE|Y}}
 
{{QE|Y}}

Please note that all contributions to OSx86 may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see OSx86:Copyrights for details). Do not submit copyrighted work without permission!

Cancel | Editing help (opens in new window)
Powered by MediaWiki © 2015 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   PHP hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers