Editing HCL 10.6.8/Portables

Jump to: navigation, search

Warning: You are not logged in.

Your IP address will be recorded in this page's edit history.
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 28: Line 28:
  
 
* see [http://www.insanelymac.com/forum/index.php?s=&showtopic=212183&view=findpost&p=1749044]
 
* see [http://www.insanelymac.com/forum/index.php?s=&showtopic=212183&view=findpost&p=1749044]
 
===[http://www.asus.com/product.aspx?P_ID=wNlU5jNxXL3CrjRU Asus G60Jx] "Republic of Gamers"===
 
* Mine is the Best Buy model (I only mention this because I believe other G60Jxs have slightly different H/W).
 
* Don't forget that SL '''requires''' GPT.
 
See 10.6.4 entry [http://wiki.osx86project.org/wiki/index.php/HCL_10.6.4/Portables#G60JX_.22Republic_of_Gamers.22 here]. All that's required for 10.6.8 is the combo update.
 
  
 
===Asus K50ID===
 
===Asus K50ID===
Line 99: Line 94:
 
*'''LAN''': Realtek RTL8168 (works with Lnx2Mac's Realtek RTL81xx 0.90)
 
*'''LAN''': Realtek RTL8168 (works with Lnx2Mac's Realtek RTL81xx 0.90)
 
*'''Video''': AMD HD 6320M (integrated to APU / no QE/CI for the moment)
 
*'''Video''': AMD HD 6320M (integrated to APU / no QE/CI for the moment)
*'''SATA & IDE''': works OOB (with automatic selection form Nawcom USB)
+
*'''SATA & IDE''': works OOB (with automatic seclection form Nawcom USB)
 
*'''WLAN''': Atheros AR9285 (works with AtherosFix)
 
*'''WLAN''': Atheros AR9285 (works with AtherosFix)
 
*'''USB''': USB2 works OOB / USB3 (ASMedia ASM1042) Doesn't work (no search to make it work yet ...)
 
*'''USB''': USB2 works OOB / USB3 (ASMedia ASM1042) Doesn't work (no search to make it work yet ...)
Line 544: Line 539:
 
*audio: alc268 works prefect with voodoo hda.
 
*audio: alc268 works prefect with voodoo hda.
 
*mic: worked on 10.5 no go with voodoo hda
 
*mic: worked on 10.5 no go with voodoo hda
*....
+
 
  
 
===Aspire 4740===
 
===Aspire 4740===
Line 633: Line 628:
 
* Graphics Controller: Intel GMA HD, works but with no acceleration. The nVidia GT 540M does not work.
 
* Graphics Controller: Intel GMA HD, works but with no acceleration. The nVidia GT 540M does not work.
  
===PCI Configuration Begin===
+
===Aspire 5315===
  
 
Bios setup options: SATA set to IDE mode because Windows 7 doesn't works well with AHCI mode, high CPU utilization while disk intensive operations
 
Bios setup options: SATA set to IDE mode because Windows 7 doesn't works well with AHCI mode, high CPU utilization while disk intensive operations
Line 653: Line 648:
  
 
Update to 10.6.8 with Combo updater from [http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg], at the end, don't press restart,  
 
Update to 10.6.8 with Combo updater from [http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg], at the end, don't press restart,  
* install legacy_kernel-10.8.0.v2.pkg from http://www.hackintoshosx.com/files/download/363-legacy-kernel-10-8-0-v2-pkg/
+
* install legacy_kernel-10.8.0.v2.pkg from http://blog.nawcom.com/legacy_kernel-10.6.8.v2.pkg.zip (more info about this kernel: [http://blog.nawcom.com/?p=791])
* to prevent "PCI Configuration Begin" error, install kexts from here [http://www.hackintoshosx.com/files/file/2297-appleacpiplatform-iopcifamily/] with kext wizard
+
* to prevent "PCI Configuration Begin" error, install kexts from here [http://www.megaupload.com/?d=2HY7O8IQ] with kext wizard from here [http://3rr0rists.net/driver/kext-wizard.html].
  
 
After install all update, '''delete''' AppleACPIPlatform.kext before reinstall it from SnowLeo installer pendrive with ACPIThermal package.   
 
After install all update, '''delete''' AppleACPIPlatform.kext before reinstall it from SnowLeo installer pendrive with ACPIThermal package.   
Line 673: Line 668:
 
sudo rm /var/vm/sleepimage   
 
sudo rm /var/vm/sleepimage   
  
Not works: TV/Video out, fax (winmodem)
+
Not works: TV/Video out, fax winmodem
 
Not tested yet: Express Card   
 
Not tested yet: Express Card   
 
    
 
    
Line 681: Line 676:
  
 
(details: [https://discussions.apple.com/message/12924009?messageID=12924009#12924009])
 
(details: [https://discussions.apple.com/message/12924009?messageID=12924009#12924009])
 
Warning: Sometimes crashing due buggy intel driver. Can't fix it, don't use as primary system.
 
  
 
=== Aspire 5315- 2153 ===
 
=== Aspire 5315- 2153 ===
Line 792: Line 785:
  
 
===Latitude D420, D430, D520, D530, D620, D630, D820, D830===
 
===Latitude D420, D430, D520, D530, D620, D630, D820, D830===
* Install Method: '''OSXLatitude''' -> follow [http://www.osxlatitude.com/ this link] for all the necessary details.
+
* Install Method: Use [http://www.osxlatitude.com/creating-a-usb-pen-with-osx-installation-2/ this link] to create USB Thumb Drive and [http://www.osxlatitude.com/howto-install-osx/ this link] to actually install it.
 
* Processors: Intel Centrino, Intel Core Duo, Intel Core 2 Duo
 
* Processors: Intel Centrino, Intel Core Duo, Intel Core 2 Duo
 
* Sound: Works with VoodooHDA.kext and AppleHDA.kext (D630 and D830 only)
 
* Sound: Works with VoodooHDA.kext and AppleHDA.kext (D630 and D830 only)
Line 847: Line 840:
 
*'''Shutdown/Reboot''' : Works.
 
*'''Shutdown/Reboot''' : Works.
 
*'''Kext Used''' : I will prepare a step-by-step installation guide with the kexts and packages required soon, please be patient.
 
*'''Kext Used''' : I will prepare a step-by-step installation guide with the kexts and packages required soon, please be patient.
 
===Inspiron E1505 / 6400===
 
{{QE|Y}}
 
*'''Install Method 1''' : IaTKOS S3 v2 (10.6.3) + rm AppleIntelGMA* + GMA950.pkg + 10.6.8 (Combo update)+ USB flash drive Install (QE was not working, Preview not working (why?))
 
*'''Install Method 2''' :  Retail 10.6.3 (Vanilla kernel) + 10.6.8 (Combo update) + external monitor + USB OSX with USB flash drive + GMA950.pkg
 
*'''Install Method 3''' : SnowLeoDVD.iso (10.6) + System software update (apple symbol/Software Update) + rm AppleIntelGMA* + GMA950-945-X3100Drivers.pkg + GMA950.pkg + USB flash drive install (using Core 2 Solo 1.86)
 
*'''CPU''' : Intel Core2Duo T5200 @ 1.6GHz - (Both Cores work with VoodooTSCSync)
 
*'''Graphic card''' : GMA950(27a2 rev3) -  QE/CI works. Monitor spanning works. (GMA950.pkg.zip + native AppleIntelIntegratedFrameBuffer.kext)
 
*'''DVD-RW''' : Optiarc DVD+-RW Generic Burn Support (not tested for burn)
 
*'''LAN''' : Broadcom 440X 10/100 - Works with BCM440X kext.
 
*'''Firewire''' : works, not tested
 
*'''Keyboard/Trackpad (2 Finger Scrolling)/Multimedia front keys''' : Works.
 
*'''Sound''' : Sigmatel 9200 : Works.
 
*'''Wireless''' : Dell Broadcom 4211 802.11 b/g works out of box.
 
*'''Bluetooth''' : no hardware present
 
*'''RICOH 3 in 1 Card Reader''' :  not tested
 
*'''Power management''' : sorta (Display sleep works. After closing lid, won't wake, but sometimes wakes after plugging or unplugging external. Will not wake from Sleep, at all. Tried SleepEneabler 10.6.8, doesn't work.)
 
*'''ShutDown/Reboot''' : Works.
 
*'''Kext/patch used''' : method 1: iATKOS S3 v2 + delete /S/L/E/AppleIntelGMA* + run GMA950.pkg (display works but no QE/QC)  method 2: (tough but recommended) iBoot Legacy + 10.6.3 vanilla + 10.6.8 comboupdate + delete delete /S/L/E/AppleIntelGMA* and run GMA950.pkg + do not delete stock Framebuffer for 27a2, VoodooTSCSync + KextBeast, BCM440kext,  Apple PS2 Controller + Voodoo PS2 synaptics trackpad + Voodoo keyboard, VoodooHDA, VoodooBattery. Custom options for initial vanilla install: unchecked languages etc., checked Rosetta
 
  
 
===Inspiron 640m / E1405===
 
===Inspiron 640m / E1405===
Line 890: Line 864:
 
===Vostro 1320===
 
===Vostro 1320===
 
{{QE|U}}
 
{{QE|U}}
*'''Install Method''' : Osx Snow Leopard 10.6.3 on USB bootable with Chameleon (terminal method) + Combo update 10.6.8
+
*'''Install Method''' : Osx Snow Leopard 10.6.3 on USB bootable with Chimera (terminal method) + Combo update 10.6.8 + Multibeast
 
*'''Boot''' : Chameleon 1.4.1
 
*'''Boot''' : Chameleon 1.4.1
 
*'''CPU''' : Intel Core2Duo T6670 @ 2.20GHz  
 
*'''CPU''' : Intel Core2Duo T6670 @ 2.20GHz  
Line 899: Line 873:
 
*'''DVD''' : Optiarc DVD RW AD 7580 S
 
*'''DVD''' : Optiarc DVD RW AD 7580 S
 
*'''Audio''' : VoodooHDA 0.2.72 + Workaround Script for enhance sound
 
*'''Audio''' : VoodooHDA 0.2.72 + Workaround Script for enhance sound
*'''WLAN''' : Broadcom BCM 802.11 54G / Broadcom BCM 802.11 300N
+
*'''WLAN''' : Broadcom BCM 802.11 54G / Broadcom BCM 802.11 300N (Multibeast)
 
*'''Ethernet''' : Working
 
*'''Ethernet''' : Working
 
*'''Modem''' : Not Tested
 
*'''Modem''' : Not Tested
Line 931: Line 905:
 
*'''ShutDown/Reboot''' : Don't Work. Black screen but System "running"
 
*'''ShutDown/Reboot''' : Don't Work. Black screen but System "running"
 
*'''Kext used''' : None
 
*'''Kext used''' : None
 
===Precision M6300===
 
{{QE|Y}}
 
*'''Install Method''' : ModCD + Mac OS X Snow Leopard (retail) DVD + Combo update 10.6.8
 
*'''Install Method''' : ModCD + Mac OS X Snow Leopard (retail) on USB + Combo update 10.6.8
 
*'''Install Method''' : (sometimes won't complete install.) Mac OS X Snow Leopard (retail) + Combo update 10.6.8
 
*'''Boot''' :
 
*'''CPU''' : Intel Core2Duo @ 2.60GHz
 
*'''GPU''' : NVIDIA Quadro FX 1600M
 
*'''DVD-RW''' : Works
 
*'''Motherboard''' : Dell Inc. 0R235J
 
*'''RAM''' : 4 GB DDR2 800MHZ
 
*'''DVD''' :
 
*'''Audio''' :
 
*'''WLAN''' : Not working
 
*'''Ethernet''' : Working
 
*'''Modem''' :
 
*'''VGA''' : Working
 
*'''Card Reader''' : Not working
 
*'''Firewire''' :
 
*'''Express Card'' : Not tested
 
*'''Battery''' : No drivers installed
 
*'''Energy states''' :
 
*'''Keyboard''' : Working [Command = Alt] [Option = Windows]
 
*'''Touchpad''' : Working
 
  
 
==Fujitsu==
 
==Fujitsu==
Line 975: Line 924:
 
*'''Kexts used''' : IOPCIFamily, AppleACPIPlatform & IO80211Monitor kexts from 10.6.7 had to be used to make 10.6.8 boot.
 
*'''Kexts used''' : IOPCIFamily, AppleACPIPlatform & IO80211Monitor kexts from 10.6.7 had to be used to make 10.6.8 boot.
 
*'''DSDT''' : Applied all ICH8 Notebook patches included with El Coniglio's DSDT editor + fixes for ALC268 and brightness control
 
*'''DSDT''' : Applied all ICH8 Notebook patches included with El Coniglio's DSDT editor + fixes for ALC268 and brightness control
 
===Celsius H240===
 
{{QE|Y}}
 
*'''Install Method''' : iAtkos 6.3
 
*'''CPU''' : Intel Core 2 Duo T7200 2.0Ghz
 
*'''Graphic card''' : Mobility FireGL V5200 (works on VGA+HDMI, not yet on LCD) patched ATI1600cotroller and ATIRadeon X1000 patched with device ID, Replaced "alopias" by "wormy" in ATIframebuffer
 
*'''RAM''' : 2 GB DDR2 667MHz
 
*'''Keyboard + Trackpad''' : Both work with ApplePS2Controller.kext in E/E
 
*'''Sound''' : Works with crackles with VoodooHDA
 
*'''Wireless''' : Intel: does not work
 
*'''Bluetooth''' : No Bluetooth
 
*'''SD Card Reader''' :  does not work
 
*'''Power management''' : Sleeps well (me too)
 
*'''ShutDown/Reboot''' : Works OOTB
 
*'''Kexts used''' :AppleACPIPS2Nub/Disabler/ElliottForceLegacyRTC/EvOReboot/Fakesmc/VoodooPScontroller/VoodooHDA(patched with device ID)
 
*'''DSDT''' : not tweaked
 
  
 
==Hewlett Packard==
 
==Hewlett Packard==
 
===HP 530 Celeron M===
 
 
* '''Install Method''': Boot-123 with 10.6.0 Retail Disc, Installed Combo Updated to 10.6.8
 
* '''Processor''': Intel Celeron M 410, 1.47GHz, recognized as a Core Solo, works fine. Note boots must be arch=i386, this is a 32-bit processor.
 
* '''Audio''': Used Voodoo 0.2.72, speakers work, headphone jack works, microphone untested.
 
* '''LAN''': Not Working - It's an Intel ProV/100; it functioned under Leopard, still looking for a kext.
 
* '''WiFi''': Natively recognized in 10.6.8 as an AirPort card. The WiFi card is a Broadcom BCM4311.
 
* '''Video''': Intel Mobile GMA 950 - Worked OOB, even from the install DVD, never needed to add kexts. Full Graphics Acceleration. VGA out port causes system freeze. Do not use.
 
* '''Keyboard''': Used PS/2 Fix. Alt keys are seen as "Command" and Fn brightness and audio work.
 
* '''Touchpad''': Recognized with the PS/2 fix as a Synaptics 6.3, 2 finger scrolling enabled by default.
 
* '''Battery''': Untested, this computer's battery is fried, though I have gotten an indicator with VooDoo Battery before.
 
* '''SATA''': Working by default. JmicronxATA doesn't seem to do anything, but it works.
 
* '''USB''': No USB at the moment, might need DSDT fix. Boot flags do not work.
 
* '''DVD-RW''': Reading of CDs and DVDs work, writes untested.
 
  
 
=== HP G50-112NR (Compaq CQ50) ===
 
=== HP G50-112NR (Compaq CQ50) ===
Line 1,099: Line 1,017:
  
 
*'''Install Method''': iBoot Legacy (safe mode) + SL 10.6, 10.6.8 ComboUpdate then EasyBeast (MultiBest.app)
 
*'''Install Method''': iBoot Legacy (safe mode) + SL 10.6, 10.6.8 ComboUpdate then EasyBeast (MultiBest.app)
**'''I didn't realized there was a guide but all the [http://www.insanelymac.com/forum/topic/155318-guide-hp-pavilion-dv3540es-3500-series-leopard-retail-1058/ links] were taken down
 
 
*'''MultiBest''': EasyBeast, System Rebuild, IOUSBFamily Rollback
 
*'''MultiBest''': EasyBeast, System Rebuild, IOUSBFamily Rollback
 
*'''BootLoderr''': chimera 1.9.1
 
*'''BootLoderr''': chimera 1.9.1
Line 1,236: Line 1,153:
 
* '''SATA''': Works with TRIM for SSD's
 
* '''SATA''': Works with TRIM for SSD's
 
* '''USB''': Works and so does the one (1) USB 3.0 Port
 
* '''USB''': Works and so does the one (1) USB 3.0 Port
 
=== HP 6910p ===
 
myHack method ,,, 1-create myHack USB ,,, 2-remove the extra folder from the USB ,,, 3-put the one in the link below (If U Have The Same Specs) ,,, (((unfortunately myHack chameleon boot-loader is a little old and has some problems loading GMA X3100 and some other kext so u'll have to replace the boot-loader on the USB with one newer )))
 
 
Follow this to replace the boot-loader ,,, 1-use chameleon wizard ,,, 2-choose ur USB stick from the choices below ,,, 3-choose update boot-loader ,,, 4-install chameleon boot-loader 2255 or 2263
 
 
5-open myHack app >> choose myFix >> choose ur myHack USB stick >> Full
 
 
in the process of installing OSX when myHack prompt u for the Extra folder choose (My Own) and then choose the one on ur myHack USB ,,, after u install OSX do NOT use the boot-loader on the Hard-disk that myHack installed it ,,, Use the USB boot-loader to boot into ur new OSX installation
 
 
My Extra Folder used in myHack USB and the OS partition
 
(Use It If U Have The Same Specs)
 
http://www.mediafire.com/?g0ha793cp4zy713
 
 
Kext in E\E
 
ACPISensors.kext , AppleACPIPS2Nub.kext , ApplePS2Controller.kext , FakeSMC.kext , Intel82566MM.kext , IntelCPUMonitor.kext , lspcidrv.kext , NullCPUPowerManagement.kext , Patched_10.7_AppleRTC.kext , X3100.kext
 
 
(( i use some extra kext to read hardware temps -- with these kext u must use HWmonitor 609 from http://www.projectosx.com/forum/index.php?act=attach&type=post&id=4364))
 
 
Kext in S\L\E  (( put it in S\L\E after the OSX install ))
 
VoodooHDA.kext (must remove AppleHDA first)
 
http://www.mediafire.com/?f9gpa9nd8c419wz
 
 
Used Patched DSDT & SSDT
 
 
SMBios as MacBook3,1
 
 
    {| class="wikitable" width=100%
 
    !Hardware Name
 
    !Chipset
 
    !Notes
 
    !Patches Used
 
    !colspan=2| 32/64bit working ''with'' patches
 
    |-
 
    |'''Processor'''
 
    |Intel Core2 Duo T7300 2GHz/4M
 
    |Working
 
    |
 
    |{{Y}}
 
    |{{Y}}
 
    |-
 
    |'''Chipset'''
 
    |Intel GM965
 
    |Working
 
    |
 
    |{{Y}}
 
    |{{Y}}
 
    |-
 
    |'''Graphics Card'''
 
    |Intel GMA X3100
 
    |Working
 
    |
 
    |{{Y}}
 
    |{{N}}
 
    |-
 
    |'''Audio'''
 
    |Analog Devices AD1981HD
 
    |Working
 
    |VoodooHDA.kext 2.8.1
 
    |{{Y}}
 
    |{{Y}}
 
    |-
 
    |'''LAN'''
 
    |Intel(R) 82566MM
 
    |Working
 
    |Intel82566MM.kext
 
    |{{Y}}
 
    |{{Y}}
 
    |-
 
    |'''Wifi'''
 
    |Intel(R) Wireless WiFi Link 4965AG
 
    |Not Working
 
    |
 
    |{{N}}
 
    |{{N}}
 
    |-
 
    |'''USB'''
 
    |3 USB @ Intel(R) ICH8
 
    |Working
 
    |DSDT EHCI Patch
 
    |{{Y}}
 
    |{{Y}}
 
    |-
 
    |'''TrackPad'''
 
    |Synaptics PS/2 Port TouchPad
 
    |Working
 
    |AppleACPIPS2Nub.kext & ApplePS2Controller.kext
 
    |{{Y}}
 
    |{{Y}}
 
    |-
 
    |'''Keyboard'''
 
    |Default
 
    |Working
 
    |AppleACPIPS2Nub.kext & ApplePS2Controller.kext
 
    |{{Y}}
 
    |{{Y}}
 
    |-
 
    |'''FireWire'''
 
    |
 
    |Working
 
    |
 
    |{{Y}}
 
    |{{Y}}
 
    |-
 
    |'''Bluetooth'''
 
    |HP Integrated Module Broadcom
 
    |Working
 
    |
 
    |{{Y}}
 
    |{{Y}}
 
    |-
 
    |'''Card Reader'''
 
    |
 
    |Not Working
 
    |
 
    |{{N}}
 
    |{{N}}
 
    |-
 
    |}
 
  
 
==Lenovo==
 
==Lenovo==
Line 1,474: Line 1,272:
 
*Bluetooth
 
*Bluetooth
 
*Modem
 
*Modem
 
=== Thinkpad T60 (2007-66U) 14.1" NON-Widescreen ===
 
{{QE|Y}}
 
*'''Install Method:''' iBoot 3.2.0 + Mac OS X 10.6.3 Retail DVD + Multibeast 3.10.1
 
*'''CPU:''': Core Duo T2500 2.0 GHz (NOT a Core2Duo, NOT 64 bit capable)
 
*'''SATA Hard Disk:''' (ICH9 Family) Yes Out of Box
 
*'''SATA DVD+/-RW:''' (ICH9 Family) Yes Out of Box
 
*'''Graphics:''' ATI X1400 Radeon Mobility *works, add 0x71451002 to ATIRadeonX1000.kext
 
*'''Audio:''' Yes (VoodooHDA 2.1)
 
*'''Wifi:''' Yes Out Of Box †
 
*'''USB:''' Yes
 
*'''Bluetooth:''' Yes Out Of Box
 
*'''Ethernet:''' Yes Out Of Box
 
*'''Trackpad:''' Synaptics Touchpad Yes (Voodoo PS/2 Touchpad)
 
*'''Sleep:''' Yes, S1 sleep works
 
*'''†:''' Had to flash a modified BIOS 2.27 (NOT 1.19! The widescreen and non-widescreen BIOSes are not compatible) with the Whitelist removed.  Replaced Intel 3945ABG with "Airport" Rebranded Broadcom BCM4311MCG
 
 
* '''Install Method:'''
 
** 1) Boot with iBoot and install 10.6.3 make sure to always boot with arch=i386
 
** 2) Once installed, update to Combo Update '''10.6.7''', followed by EasyBeast with Multibeast.  Edit /Extra/org.chameleon.Boot.plist and remove the GraphicsEnabler=Yes section. Reboot.
 
** 3) Copy AppleACPIPlatform.kext, IOGraphicsFamily.kext, IONDRVSupport.kext and IOPCIFamily.kext from 10.6.7 to desktop.
 
** 4) Install Combo Update 10.6.8.  Before reboot, reinstall the four 10.6.7 kexts mentioned and run Multibeast selecting EasyBeast and VoodooHDA 2.1.  Repair permissions.  Remove GraphicsEnabler=Yes from your boot.plist again.  Reboot, make sure to boot with -f or else you'll probably encounter a kernel panic.
 
** 5) To enable QE/CI and resolution change, add 0x71451002 to /System/Library/Extensions/ATIRadeonX1000.kext/Contents/Info.plist and install RadeonHD.kext.  Repair permissions and reboot.
 
** 6) You will now have a 100% functional T60.  You can do a few things to tweak performance like extracting your EDID information and injecting it into RadeonHD.kext (helps reduce the mouse tearing problem but DOES NOT fix it), and you can edit your smbios.plist and AGPM.kext to improve power management slightly.
 
 
My boot.plist
 
<?xml version="1.0" encoding="UTF-8"?>
 
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 
<plist version="1.0">
 
<dict>
 
<key>EthernetBuiltIn</key>
 
<string>Yes</string>
 
<key>Kernel</key>
 
<string>mach_kernel</string>
 
<key>Graphics Mode</key>
 
<string>1400x1050x32</string>
 
<key>Kernel Flags</key>
 
<string>arch=i386 npci=0x2000 cpus=1 PCIRootUID=1</string>
 
<key>Legacy Logo</key>
 
<string>Yes</string>
 
<key>Quiet Boot</key>
 
<string>Yes</string>
 
<key>Boot Banner</key>
 
<string>No</string>
 
<key>Timeout</key>
 
<string>0</string>
 
<key>UseKernelCache</key>
 
<string>Yes</string>
 
</dict>
 
</plist>
 
 
My smbios.plist
 
 
<?xml version="1.0" encoding="UTF-8"?>
 
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 
<plist version="1.0">
 
<dict>
 
<key>SMbiosdate</key>
 
<string>10/12/06</string>
 
<key>SMbiosvendor</key>
 
<string>Apple Computer, Inc.</string>
 
<key>SMbiosversion</key>
 
<string>MBP11.88Z.0055.B08.0610121325</string>
 
<key>SMboardproduct</key>
 
<string>Mac-F425BEC8</string>
 
<key>SMfamily</key>
 
<string>MacBook</string>
 
<key>SMmanufacturer</key>
 
<string>Apple Computer, Inc.</string>
 
<key>SMproductname</key>
 
<string>MacBook4,1,Black</string>
 
<key>SMserial</key>
 
<string>CK847210XYL</string>
 
<key>SMsystemversion</key>
 
<string>1.0</string>
 
</dict>
 
</plist>
 
  
 
=== Thinkpad T61 (8895-2FG) ===
 
=== Thinkpad T61 (8895-2FG) ===
Line 1,711: Line 1,432:
  
 
==Toshiba==
 
==Toshiba==
=== Satellite A100-811 ===
 
{{QE|Y}}
 
{| class="wikitable" width="100%"
 
!Parts
 
!Device
 
!Working
 
!Notes
 
|-
 
|'''Processor'''
 
|Intel Core 2 Duo T5600 (1.83 GHz)
 
|Yes
 
|Out the Box
 
|-
 
|'''SATA'''
 
|Hard Disk (ICH8 Family)
 
|Yes
 
|Out the Box
 
|-
 
|'''PATA'''
 
|DVD+/-RW (ICH8 Family)
 
|Yes
 
|Out the Box
 
|-
 
|'''Graphics'''
 
|Intel GMA950
 
|Yes
 
|Out the box, but need DSDT patch for Laptop. Works only for 32 bit mode. 64 bit - not working (only one resolution). Install with an external monitor.
 
|-
 
|'''Audio'''
 
|AC97 HDA (ALC861)
 
|Yes
 
|[http://code.google.com/p/voodoohda/downloads/list VoodooHDA.kext] (S/L/E)
 
|-
 
|'''Wireless'''
 
|3945ABG b/g
 
|No
 
|
 
|-
 
|'''USB'''
 
|ICH8M Family
 
|Yes
 
|Out the Box
 
|-
 
|'''Ethernet'''
 
|Intel PRO 100 VE (0x10928086)
 
|Yes
 
|IONetworkingFamily.kext (with modifying AppleIntel8255x.kext) + delete AppleHPET.kext
 
|-
 
|'''Battery'''
 
|Integrated
 
|Yes (not testing)
 
|[http://forum.voodooprojects.org/index.php/topic,1092.0.html VoodooBattery.kext] (32/64 bits)
 
|-
 
|'''FireWire'''
 
|TI PCIxx12 OHCI Compliant IEEE 1394 Host Controller
 
|Yes (not testing)
 
|Out the Box
 
|-
 
|'''Bluetooth'''
 
|Toshiba
 
|Yes
 
|[http://www.insanelymac.com/forum/index.php?showtopic=156596 ToshibaBluetooth.kext] - [http://www.insanelymac.com/forum/index.php?s=9de477b75d363359461615bba6da6154&act=attach&type=post&id=46257 x32 version], install only in the S/L/E
 
|-
 
|-
 
|'''Card Reader'''
 
|Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
 
|Partially (not tested)
 
|VoodooSDHCI.kext (32/64 bits)
 
|-
 
|'''Touchpad'''
 
|Integrated PS/2
 
|Yes
 
|[http://forum.voodooprojects.org/index.php/topic,235.0.html VoodooPS2Controller.pkg] (can be installed in /Extra/Extensions/ folder)
 
|-
 
|'''Modem'''
 
|Integrated
 
|No
 
|I´m not using it.
 
|-
 
|}
 
 
Install method: External Monitor + Legacy Boot CD + Mac OSX Snow Leopard 10.6.3 Retail + [http://support.apple.com/downloads/DL1324/en_US/MacOSXUpdCombo10.6.5.dmg Combo Update 10.6.5] + [http://support.apple.com/downloads/DL1349/en_US/MacOSXUpdCombo10.6.6.dmg Combo Update 10.6.6]
 
 
Notes:
 
IONetworkingFamily.kext must be installed in S/L/E (not in the /Extra/Extensions), same VoodooHDA, ToshibaBluetooth. VoodooPS2 can be installed in /Extra.
 
For solving problem with Cable Unplugged (ethernet) - delete AppleHPET.kext (S/L/E).
 
 
Other kexts (/Extra/Extensions/):
 
*EvOreboot.kext
 
*fakesmc.kext
 
*JMicron36xATA.kext
 
*JMicron36xSATA.kext
 
*LegacyAppleRTC.kext
 
*NullCPUPowerManagement.kext
 
Troubles: 64bit mode doesn't work.
 
 
 
===Satellite A135-S4527===
 
===Satellite A135-S4527===
  
 
*Install Method: iBoot Legacy 2.7.2 + 10.6 then 10.6.8 ComboUpdate
 
*Install Method: iBoot Legacy 2.7.2 + 10.6 then 10.6.8 ComboUpdate
*MB: EB, system utilies, Chimera, VoodooHDA 0.2.7.2
+
*MultiBeast: Easybeast, system utilies, Chimera, VoodooHDA 0.2.7.2
 
*Intel Dual Core T2080 (1.73 GHz): Out the Box, detected as Core Duo 1.73 GHz
 
*Intel Dual Core T2080 (1.73 GHz): Out the Box, detected as Core Duo 1.73 GHz
 
*Video: Intel GMA 950 works oob {{QE|Y}}
 
*Video: Intel GMA 950 works oob {{QE|Y}}
Line 1,831: Line 1,456:
 
laptop needs to restart once for the cpu fan spinning before ready for operation.
 
laptop needs to restart once for the cpu fan spinning before ready for operation.
 
</pre>
 
</pre>
 
=== Satellite A300-1G3 ===
 
Installation method: iATKOS S3 v2 + Combo Update 10.6.8 with USB and ACPI/PCI fixes
 
{{QE/CI|Y}}
 
{| class="wikitable" width="100%"
 
!Parts
 
!Device
 
!Working
 
!Notes
 
|-
 
|'''Processor'''
 
|Intel Core 2 Duo T5850 (2.16 GHz)
 
|Yes
 
|Out of the box
 
|-
 
|'''SATA'''
 
|Hard Disk (ICH8 Family)
 
|Yes
 
|Out of the box
 
|-
 
|'''PATA'''
 
|DVD+/-RW (ICH8 Family)
 
|Yes
 
|Out of the box
 
|-
 
|'''Graphics'''
 
|Intel GMA X3100
 
|Yes
 
|Out of the box, works only in 32-bits mode (boot with arch=i386 argument in Chameleon/Chimera)
 
|-
 
|'''Audio'''
 
|HDA
 
|Yes
 
|Out of the box
 
|-
 
|'''Wireless'''
 
|3945ABG b/g
 
|No
 
|I've replaced original 3945 with Atheros AR9285 and installed AR9285 kext, works fine as Airport.
 
|-
 
|'''USB'''
 
|ICH8M Family
 
|Yes
 
|Out of the box (After update to 10.6.8 you'll need to install USB fixes and boot with USBBusFix=Yes argument in Chameleon/Chimera)
 
|-
 
|'''Ethernet'''
 
|Realtek RTL8169 Fast Ethernet Controller
 
|Yes
 
|Install RTGNIC v.2.0.6 package, reboot, go into Apple Menu->System Preference->Network and configure your adapter, and you're good to go. (Note: this package also supports 8169S(SB)/8168(B/C/CP/D/E/F)/8101E/8102E/8103E/8105E network cards)
 
|-
 
|'''Battery'''
 
|Integrated
 
|Yes
 
|VoodooBattery.kext
 
|-
 
|'''FireWire'''
 
|TI PCIxx12 OHCI Compliant IEEE 1394 Host Controller
 
|Yes
 
|Out of the box
 
|-
 
|'''Card Reader'''
 
|Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
 
|Not tested
 
|
 
|-
 
|'''Touchpad'''
 
|Integrated PS/2
 
|Yes
 
|VoodooPS2Controller.kext
 
|-
 
|'''Modem'''
 
|Integrated
 
|No
 
|I´m not using it.
 
|-
 
|}
 
  
 
===Satellite A300-1EC===
 
===Satellite A300-1EC===
Line 2,045: Line 1,594:
  
 
===Satellite L650-078===
 
===Satellite L650-078===
* Install Method: iBoot Legacy 2.7.2 + Retail 10.6.0 DVD.  MB + Combo Update 10.6.8
+
* Install Method: iBoot Legacy 2.7.2 + Retail 10.6.0 DVD.  MultiBeast + Combo Update 10.6.8
 
* Processor: Core i3 M350 (@2.27)
 
* Processor: Core i3 M350 (@2.27)
 
* Audio: Conexant CX20671 (14F1:5069) - works with VoodooHDA (HDAEnabler kexts seem to cause a Kernel Panic)
 
* Audio: Conexant CX20671 (14F1:5069) - works with VoodooHDA (HDAEnabler kexts seem to cause a Kernel Panic)
Line 2,060: Line 1,609:
 
*# Remove IOPlatformPluginFamily.kext from /System/Library/Extensions/ (this is so that the combo update won't panic and kill your install).
 
*# Remove IOPlatformPluginFamily.kext from /System/Library/Extensions/ (this is so that the combo update won't panic and kill your install).
 
*# Reboot - usual flags "-v -x GraphicsEnabler=No"
 
*# Reboot - usual flags "-v -x GraphicsEnabler=No"
*# Launch the MB installer and proceed to the install options screen - but DO NOT actually click install yet.
+
*# Launch the MultiBeast installer and proceed to the install options screen - but DO NOT actually click install yet.
 
*# Run combo updater but DO NOT click the restart button when finished (if you do you need to go back to step one and begin again).
 
*# Run combo updater but DO NOT click the restart button when finished (if you do you need to go back to step one and begin again).
*# Flick back to MB and click the Install button now.  When complete allow the Combo update to restart.
+
*# Flick back to MultiBeast and click the Install button now.  When complete allow the Combo update to restart.
 
*# You know what to type now... but we shall soon avoid needing to do that.
 
*# You know what to type now... but we shall soon avoid needing to do that.
 
*# Install Chameleon (use the installer package and then update files manually if you really want).  Edit the /Extras/org.chameleon.Boot.plist file and add in our Kernel Flags in the appropriate places (there are guides out there to help with flags).  From this point on safe mode (-x) doesn't seem needed, but GraphicsEnabler=No is a MUST.
 
*# Install Chameleon (use the installer package and then update files manually if you really want).  Edit the /Extras/org.chameleon.Boot.plist file and add in our Kernel Flags in the appropriate places (there are guides out there to help with flags).  From this point on safe mode (-x) doesn't seem needed, but GraphicsEnabler=No is a MUST.
Line 2,104: Line 1,653:
  
 
*'''BIOS''': 2.20
 
*'''BIOS''': 2.20
*'''Install Method''': iBoot + 10.6.0 Retail Snow Leopard DVD (use arch=i386) + 10.6.8 (Combo update) + MB (did not use EB or UserDSDT, instead used a-la-carte method)
+
*'''Install Method''': iBoot + 10.6.0 Retail Snow Leopard DVD (use arch=i386) + 10.6.8 (Combo update) + MultiBeast (did not use EasyBeast or UserDSDT, instead used a-la-carte method)
 
*'''OsX Version''': Retail/Vanilla Kernel 10.6.8 (32-Bit) - Chameleon 2.0 RC5 Bootloader
 
*'''OsX Version''': Retail/Vanilla Kernel 10.6.8 (32-Bit) - Chameleon 2.0 RC5 Bootloader
 
*'''CPU''': Intel Core2Duo T3400 @ 2.16GHz, 1MB L2, 667MHz FSB, Intel GL40 Express Chipset
 
*'''CPU''': Intel Core2Duo T3400 @ 2.16GHz, 1MB L2, 667MHz FSB, Intel GL40 Express Chipset
Line 2,119: Line 1,668:
 
*'''ShutDown/Reboot''': Works
 
*'''ShutDown/Reboot''': Works
 
*'''Battery Indicator''': Works with Voodoo Battery kext
 
*'''Battery Indicator''': Works with Voodoo Battery kext
*'''Kexts/MB settings used''': VoodooHDA 0.2.72; FakeSMC; FakeSMC Motherboard Plugins; NullCPUPowerManagement; Voodoo PS/2 Controller; Voodoo Trackpad; Chimera v1.5.4 r1394; 32-bit Apple Boot Screen; Voodoo Battery
+
*'''Kexts/MultiBeast settings used''': VoodooHDA 0.2.72; FakeSMC; FakeSMC Motherboard Plugins; NullCPUPowerManagement; Voodoo PS/2 Controller; Voodoo Trackpad; Chimera v1.5.4 r1394; 32-bit Apple Boot Screen; Voodoo Battery
  
 
===Qosmio X505-Q885===
 
===Qosmio X505-Q885===
Line 2,140: Line 1,689:
 
===Qosmio X505-Q870===
 
===Qosmio X505-Q870===
  
*'''Install Method''': TonyMAc iboot 3.2.0 + Mb 3.10.1
+
*'''Install Method''': TonyMAc iboot 3.2.0 + Multibeast 3.10.1 [http://tonymacx86.blogspot.com/2010/04/iboot-multibeast-install-mac-os-x-on.html click here to download iboot and Multibeast and install instructions.]
 
*'''OSX Version''': 10.6.8 Retail Snow Leopard DVD
 
*'''OSX Version''': 10.6.8 Retail Snow Leopard DVD
 
*'''CPU''': Intel i7  
 
*'''CPU''': Intel i7  

Please note that all contributions to OSx86 may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see OSx86:Copyrights for details). Do not submit copyrighted work without permission!

Cancel | Editing help (opens in new window)
Powered by MediaWiki © 2015 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   PHP hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers