Editing HCL 10.6.8/Portables

Jump to: navigation, search

Warning: You are not logged in.

Your IP address will be recorded in this page's edit history.
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 28: Line 28:
  
 
* see [http://www.insanelymac.com/forum/index.php?s=&showtopic=212183&view=findpost&p=1749044]
 
* see [http://www.insanelymac.com/forum/index.php?s=&showtopic=212183&view=findpost&p=1749044]
 
===[http://www.asus.com/product.aspx?P_ID=wNlU5jNxXL3CrjRU Asus G60Jx] "Republic of Gamers"===
 
* Mine is the Best Buy model (I only mention this because I believe other G60Jxs have slightly different H/W).
 
* Don't forget that SL '''requires''' GPT.
 
See 10.6.4 entry [http://wiki.osx86project.org/wiki/index.php/HCL_10.6.4/Portables#G60JX_.22Republic_of_Gamers.22 here]. All that's required for 10.6.8 is the combo update.
 
  
 
===Asus K50ID===
 
===Asus K50ID===
Line 99: Line 94:
 
*'''LAN''': Realtek RTL8168 (works with Lnx2Mac's Realtek RTL81xx 0.90)
 
*'''LAN''': Realtek RTL8168 (works with Lnx2Mac's Realtek RTL81xx 0.90)
 
*'''Video''': AMD HD 6320M (integrated to APU / no QE/CI for the moment)
 
*'''Video''': AMD HD 6320M (integrated to APU / no QE/CI for the moment)
*'''SATA & IDE''': works OOB (with automatic selection form Nawcom USB)
+
*'''SATA & IDE''': works OOB (with automatic seclection form Nawcom USB)
 
*'''WLAN''': Atheros AR9285 (works with AtherosFix)
 
*'''WLAN''': Atheros AR9285 (works with AtherosFix)
 
*'''USB''': USB2 works OOB / USB3 (ASMedia ASM1042) Doesn't work (no search to make it work yet ...)
 
*'''USB''': USB2 works OOB / USB3 (ASMedia ASM1042) Doesn't work (no search to make it work yet ...)
Line 633: Line 628:
 
* Graphics Controller: Intel GMA HD, works but with no acceleration. The nVidia GT 540M does not work.
 
* Graphics Controller: Intel GMA HD, works but with no acceleration. The nVidia GT 540M does not work.
  
===PCI Configuration Begin===
+
===Aspire 5315===
  
 
Bios setup options: SATA set to IDE mode because Windows 7 doesn't works well with AHCI mode, high CPU utilization while disk intensive operations
 
Bios setup options: SATA set to IDE mode because Windows 7 doesn't works well with AHCI mode, high CPU utilization while disk intensive operations
Line 653: Line 648:
  
 
Update to 10.6.8 with Combo updater from [http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg], at the end, don't press restart,  
 
Update to 10.6.8 with Combo updater from [http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg], at the end, don't press restart,  
* install legacy_kernel-10.8.0.v2.pkg from http://www.hackintoshosx.com/files/download/363-legacy-kernel-10-8-0-v2-pkg/
+
* install legacy_kernel-10.8.0.v2.pkg from http://blog.nawcom.com/legacy_kernel-10.6.8.v2.pkg.zip (more info about this kernel: [http://blog.nawcom.com/?p=791])
* to prevent "PCI Configuration Begin" error, install kexts from here [http://www.hackintoshosx.com/files/file/2297-appleacpiplatform-iopcifamily/] with kext wizard
+
* to prevent "PCI Configuration Begin" error, install kexts from here [http://www.megaupload.com/?d=2HY7O8IQ] with kext wizard from here [http://3rr0rists.net/driver/kext-wizard.html].
  
 
After install all update, '''delete''' AppleACPIPlatform.kext before reinstall it from SnowLeo installer pendrive with ACPIThermal package.   
 
After install all update, '''delete''' AppleACPIPlatform.kext before reinstall it from SnowLeo installer pendrive with ACPIThermal package.   
Line 673: Line 668:
 
sudo rm /var/vm/sleepimage   
 
sudo rm /var/vm/sleepimage   
  
Not works: TV/Video out, fax (winmodem)
+
Not works: TV/Video out, fax winmodem
 
Not tested yet: Express Card   
 
Not tested yet: Express Card   
 
    
 
    
Line 890: Line 885:
 
===Vostro 1320===
 
===Vostro 1320===
 
{{QE|U}}
 
{{QE|U}}
*'''Install Method''' : Osx Snow Leopard 10.6.3 on USB bootable with Chameleon (terminal method) + Combo update 10.6.8
+
*'''Install Method''' : Osx Snow Leopard 10.6.3 on USB bootable with Chimera (terminal method) + Combo update 10.6.8
 
*'''Boot''' : Chameleon 1.4.1
 
*'''Boot''' : Chameleon 1.4.1
 
*'''CPU''' : Intel Core2Duo T6670 @ 2.20GHz  
 
*'''CPU''' : Intel Core2Duo T6670 @ 2.20GHz  
Line 931: Line 926:
 
*'''ShutDown/Reboot''' : Don't Work. Black screen but System "running"
 
*'''ShutDown/Reboot''' : Don't Work. Black screen but System "running"
 
*'''Kext used''' : None
 
*'''Kext used''' : None
 
===Precision M6300===
 
{{QE|Y}}
 
*'''Install Method''' : ModCD + Mac OS X Snow Leopard (retail) DVD + Combo update 10.6.8
 
*'''Install Method''' : ModCD + Mac OS X Snow Leopard (retail) on USB + Combo update 10.6.8
 
*'''Install Method''' : (sometimes won't complete install.) Mac OS X Snow Leopard (retail) + Combo update 10.6.8
 
*'''Boot''' :
 
*'''CPU''' : Intel Core2Duo @ 2.60GHz
 
*'''GPU''' : NVIDIA Quadro FX 1600M
 
*'''DVD-RW''' : Works
 
*'''Motherboard''' : Dell Inc. 0R235J
 
*'''RAM''' : 4 GB DDR2 800MHZ
 
*'''DVD''' :
 
*'''Audio''' :
 
*'''WLAN''' : Not working
 
*'''Ethernet''' : Working
 
*'''Modem''' :
 
*'''VGA''' : Working
 
*'''Card Reader''' : Not working
 
*'''Firewire''' :
 
*'''Express Card'' : Not tested
 
*'''Battery''' : No drivers installed
 
*'''Energy states''' :
 
*'''Keyboard''' : Working [Command = Alt] [Option = Windows]
 
*'''Touchpad''' : Working
 
  
 
==Fujitsu==
 
==Fujitsu==
Line 995: Line 965:
  
 
===HP 530 Celeron M===
 
===HP 530 Celeron M===
 
+
{{Box RED|Note Administrator: |We don't support tonymac's tools, please find another way. Cordially}}
* '''Install Method''': Boot-123 with 10.6.0 Retail Disc, Installed Combo Updated to 10.6.8
+
* ""Install Method"": Installed Combo Updated to 10.6.8
* '''Processor''': Intel Celeron M 410, 1.47GHz, recognized as a Core Solo, works fine. Note boots must be arch=i386, this is a 32-bit processor.
+
* ""Processor"": Intel Celeron M 410, 1.47GHz, recognized as a Core Solo, works fine. Note boots must be arch=i386, this is a 32-bit processor.
* '''Audio''': Used Voodoo 0.2.72, speakers work, headphone jack works, microphone untested.  
+
* ""Audio"": Used Voodoo 0.2.72, speakers work, headphone jack works, microphone untested.  
* '''LAN''': Not Working - It's an Intel ProV/100; it functioned under Leopard, still looking for a kext.
+
* ""LAN"": Not Working - It's an Intel ProV/100; it functioned under Leopard, still looking for a kext.
* '''WiFi''': Natively recognized in 10.6.8 as an AirPort card. The WiFi card is a Broadcom BCM4311.
+
* ""WiFi"": Natively recognized in 10.6.8 as an AirPort card. The WiFi card is a Broadcom BCM4311.
* '''Video''': Intel Mobile GMA 950 - Worked OOB, even from the install DVD, never needed to add kexts. Full Graphics Acceleration. VGA out port causes system freeze. Do not use.
+
* ""Video"": Intel Mobile GMA 950 - Worked OOB, even from the install DVD, never needed to add kexts. Full Graphics Acceleration. VGA out port causes system freeze. Do not use.
* '''Keyboard''': Used PS/2 Fix. Alt keys are seen as "Command" and Fn brightness and audio work.
+
* ""Keyboard"": Used PS/2 Fix. Alt keys are seen as "Command" and Fn brightness and audio work.
* '''Touchpad''': Recognized with the PS/2 fix as a Synaptics 6.3, 2 finger scrolling enabled by default.
+
* ""Touchpad"": Recognized with the PS/2 fix as a Synaptics 6.3, 2 finger scrolling enabled by default.
* '''Battery''': Untested, this computer's battery is fried, though I have gotten an indicator with VooDoo Battery before.
+
* ""Battery"": Untested, this computer's battery is fried, though I have gotten an indicator with VooDoo Battery before.
* '''SATA''': Working by default. JmicronxATA doesn't seem to do anything, but it works.
+
* ""SATA"": Working by default. JmicronxATA doesn't seem to do anything, but it works.
* '''USB''': No USB at the moment, might need DSDT fix. Boot flags do not work.  
+
* ""USB"": Worked in 10.6.8 after install IOUSB kexts.
* '''DVD-RW''': Reading of CDs and DVDs work, writes untested.
+
* ""DVD-RW"": Reading of CDs and DVDs work, writes untested.
  
 
=== HP G50-112NR (Compaq CQ50) ===
 
=== HP G50-112NR (Compaq CQ50) ===
Line 1,099: Line 1,069:
  
 
*'''Install Method''': iBoot Legacy (safe mode) + SL 10.6, 10.6.8 ComboUpdate then EasyBeast (MultiBest.app)
 
*'''Install Method''': iBoot Legacy (safe mode) + SL 10.6, 10.6.8 ComboUpdate then EasyBeast (MultiBest.app)
**'''I didn't realized there was a guide but all the [http://www.insanelymac.com/forum/topic/155318-guide-hp-pavilion-dv3540es-3500-series-leopard-retail-1058/ links] were taken down
 
 
*'''MultiBest''': EasyBeast, System Rebuild, IOUSBFamily Rollback
 
*'''MultiBest''': EasyBeast, System Rebuild, IOUSBFamily Rollback
 
*'''BootLoderr''': chimera 1.9.1
 
*'''BootLoderr''': chimera 1.9.1
Line 1,810: Line 1,779:
  
 
*Install Method: iBoot Legacy 2.7.2 + 10.6 then 10.6.8 ComboUpdate
 
*Install Method: iBoot Legacy 2.7.2 + 10.6 then 10.6.8 ComboUpdate
*MB: EB, system utilies, Chimera, VoodooHDA 0.2.7.2
+
*MultiBeast: Easybeast, system utilies, Chimera, VoodooHDA 0.2.7.2
 
*Intel Dual Core T2080 (1.73 GHz): Out the Box, detected as Core Duo 1.73 GHz
 
*Intel Dual Core T2080 (1.73 GHz): Out the Box, detected as Core Duo 1.73 GHz
 
*Video: Intel GMA 950 works oob {{QE|Y}}
 
*Video: Intel GMA 950 works oob {{QE|Y}}
Line 1,831: Line 1,800:
 
laptop needs to restart once for the cpu fan spinning before ready for operation.
 
laptop needs to restart once for the cpu fan spinning before ready for operation.
 
</pre>
 
</pre>
 
=== Satellite A300-1G3 ===
 
Installation method: iATKOS S3 v2 + Combo Update 10.6.8 with USB and ACPI/PCI fixes
 
{{QE/CI|Y}}
 
{| class="wikitable" width="100%"
 
!Parts
 
!Device
 
!Working
 
!Notes
 
|-
 
|'''Processor'''
 
|Intel Core 2 Duo T5850 (2.16 GHz)
 
|Yes
 
|Out of the box
 
|-
 
|'''SATA'''
 
|Hard Disk (ICH8 Family)
 
|Yes
 
|Out of the box
 
|-
 
|'''PATA'''
 
|DVD+/-RW (ICH8 Family)
 
|Yes
 
|Out of the box
 
|-
 
|'''Graphics'''
 
|Intel GMA X3100
 
|Yes
 
|Out of the box, works only in 32-bits mode (boot with arch=i386 argument in Chameleon/Chimera)
 
|-
 
|'''Audio'''
 
|HDA
 
|Yes
 
|Out of the box
 
|-
 
|'''Wireless'''
 
|3945ABG b/g
 
|No
 
|I've replaced original 3945 with Atheros AR9285 and installed AR9285 kext, works fine as Airport.
 
|-
 
|'''USB'''
 
|ICH8M Family
 
|Yes
 
|Out of the box (After update to 10.6.8 you'll need to install USB fixes and boot with USBBusFix=Yes argument in Chameleon/Chimera)
 
|-
 
|'''Ethernet'''
 
|Realtek RTL8169 Fast Ethernet Controller
 
|Yes
 
|Install RTGNIC v.2.0.6 package, reboot, go into Apple Menu->System Preference->Network and configure your adapter, and you're good to go. (Note: this package also supports 8169S(SB)/8168(B/C/CP/D/E/F)/8101E/8102E/8103E/8105E network cards)
 
|-
 
|'''Battery'''
 
|Integrated
 
|Yes
 
|VoodooBattery.kext
 
|-
 
|'''FireWire'''
 
|TI PCIxx12 OHCI Compliant IEEE 1394 Host Controller
 
|Yes
 
|Out of the box
 
|-
 
|'''Card Reader'''
 
|Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
 
|Not tested
 
|
 
|-
 
|'''Touchpad'''
 
|Integrated PS/2
 
|Yes
 
|VoodooPS2Controller.kext
 
|-
 
|'''Modem'''
 
|Integrated
 
|No
 
|I´m not using it.
 
|-
 
|}
 
  
 
===Satellite A300-1EC===
 
===Satellite A300-1EC===
Line 2,045: Line 1,938:
  
 
===Satellite L650-078===
 
===Satellite L650-078===
* Install Method: iBoot Legacy 2.7.2 + Retail 10.6.0 DVD.  MB + Combo Update 10.6.8
+
* Install Method: iBoot Legacy 2.7.2 + Retail 10.6.0 DVD.  MultiBeast + Combo Update 10.6.8
 
* Processor: Core i3 M350 (@2.27)
 
* Processor: Core i3 M350 (@2.27)
 
* Audio: Conexant CX20671 (14F1:5069) - works with VoodooHDA (HDAEnabler kexts seem to cause a Kernel Panic)
 
* Audio: Conexant CX20671 (14F1:5069) - works with VoodooHDA (HDAEnabler kexts seem to cause a Kernel Panic)
Line 2,060: Line 1,953:
 
*# Remove IOPlatformPluginFamily.kext from /System/Library/Extensions/ (this is so that the combo update won't panic and kill your install).
 
*# Remove IOPlatformPluginFamily.kext from /System/Library/Extensions/ (this is so that the combo update won't panic and kill your install).
 
*# Reboot - usual flags "-v -x GraphicsEnabler=No"
 
*# Reboot - usual flags "-v -x GraphicsEnabler=No"
*# Launch the MB installer and proceed to the install options screen - but DO NOT actually click install yet.
+
*# Launch the MultiBeast installer and proceed to the install options screen - but DO NOT actually click install yet.
 
*# Run combo updater but DO NOT click the restart button when finished (if you do you need to go back to step one and begin again).
 
*# Run combo updater but DO NOT click the restart button when finished (if you do you need to go back to step one and begin again).
*# Flick back to MB and click the Install button now.  When complete allow the Combo update to restart.
+
*# Flick back to MultiBeast and click the Install button now.  When complete allow the Combo update to restart.
 
*# You know what to type now... but we shall soon avoid needing to do that.
 
*# You know what to type now... but we shall soon avoid needing to do that.
 
*# Install Chameleon (use the installer package and then update files manually if you really want).  Edit the /Extras/org.chameleon.Boot.plist file and add in our Kernel Flags in the appropriate places (there are guides out there to help with flags).  From this point on safe mode (-x) doesn't seem needed, but GraphicsEnabler=No is a MUST.
 
*# Install Chameleon (use the installer package and then update files manually if you really want).  Edit the /Extras/org.chameleon.Boot.plist file and add in our Kernel Flags in the appropriate places (there are guides out there to help with flags).  From this point on safe mode (-x) doesn't seem needed, but GraphicsEnabler=No is a MUST.
Line 2,104: Line 1,997:
  
 
*'''BIOS''': 2.20
 
*'''BIOS''': 2.20
*'''Install Method''': iBoot + 10.6.0 Retail Snow Leopard DVD (use arch=i386) + 10.6.8 (Combo update) + MB (did not use EB or UserDSDT, instead used a-la-carte method)
+
*'''Install Method''': iBoot + 10.6.0 Retail Snow Leopard DVD (use arch=i386) + 10.6.8 (Combo update) + MultiBeast (did not use EasyBeast or UserDSDT, instead used a-la-carte method)
 
*'''OsX Version''': Retail/Vanilla Kernel 10.6.8 (32-Bit) - Chameleon 2.0 RC5 Bootloader
 
*'''OsX Version''': Retail/Vanilla Kernel 10.6.8 (32-Bit) - Chameleon 2.0 RC5 Bootloader
 
*'''CPU''': Intel Core2Duo T3400 @ 2.16GHz, 1MB L2, 667MHz FSB, Intel GL40 Express Chipset
 
*'''CPU''': Intel Core2Duo T3400 @ 2.16GHz, 1MB L2, 667MHz FSB, Intel GL40 Express Chipset
Line 2,119: Line 2,012:
 
*'''ShutDown/Reboot''': Works
 
*'''ShutDown/Reboot''': Works
 
*'''Battery Indicator''': Works with Voodoo Battery kext
 
*'''Battery Indicator''': Works with Voodoo Battery kext
*'''Kexts/MB settings used''': VoodooHDA 0.2.72; FakeSMC; FakeSMC Motherboard Plugins; NullCPUPowerManagement; Voodoo PS/2 Controller; Voodoo Trackpad; Chimera v1.5.4 r1394; 32-bit Apple Boot Screen; Voodoo Battery
+
*'''Kexts/MultiBeast settings used''': VoodooHDA 0.2.72; FakeSMC; FakeSMC Motherboard Plugins; NullCPUPowerManagement; Voodoo PS/2 Controller; Voodoo Trackpad; Chimera v1.5.4 r1394; 32-bit Apple Boot Screen; Voodoo Battery
  
 
===Qosmio X505-Q885===
 
===Qosmio X505-Q885===
Line 2,140: Line 2,033:
 
===Qosmio X505-Q870===
 
===Qosmio X505-Q870===
  
*'''Install Method''': TonyMAc iboot 3.2.0 + Mb 3.10.1
+
*'''Install Method''': TonyMAc iboot 3.2.0 + Multibeast 3.10.1 [http://tonymacx86.blogspot.com/2010/04/iboot-multibeast-install-mac-os-x-on.html click here to download iboot and Multibeast and install instructions.]
 
*'''OSX Version''': 10.6.8 Retail Snow Leopard DVD
 
*'''OSX Version''': 10.6.8 Retail Snow Leopard DVD
 
*'''CPU''': Intel i7  
 
*'''CPU''': Intel i7  

Please note that all contributions to OSx86 may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see OSx86:Copyrights for details). Do not submit copyrighted work without permission!

Cancel | Editing help (opens in new window)
Powered by MediaWiki © 2015 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   PHP hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers