Editing HCL 10.6.8/Portables

Jump to: navigation, search

Warning: You are not logged in.

Your IP address will be recorded in this page's edit history.
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 99: Line 99:
 
*'''LAN''': Realtek RTL8168 (works with Lnx2Mac's Realtek RTL81xx 0.90)
 
*'''LAN''': Realtek RTL8168 (works with Lnx2Mac's Realtek RTL81xx 0.90)
 
*'''Video''': AMD HD 6320M (integrated to APU / no QE/CI for the moment)
 
*'''Video''': AMD HD 6320M (integrated to APU / no QE/CI for the moment)
*'''SATA & IDE''': works OOB (with automatic selection form Nawcom USB)
+
*'''SATA & IDE''': works OOB (with automatic seclection form Nawcom USB)
 
*'''WLAN''': Atheros AR9285 (works with AtherosFix)
 
*'''WLAN''': Atheros AR9285 (works with AtherosFix)
 
*'''USB''': USB2 works OOB / USB3 (ASMedia ASM1042) Doesn't work (no search to make it work yet ...)
 
*'''USB''': USB2 works OOB / USB3 (ASMedia ASM1042) Doesn't work (no search to make it work yet ...)
Line 804: Line 804:
 
* LAN: Works
 
* LAN: Works
 
* Dell Wireless 5520 HSDPA: Works with Novatel Drivers after firmware update [http://www.dc-files.com/files/novatel/modems/EU870D/] - Sets device & vendor IDs to Novatel's original
 
* Dell Wireless 5520 HSDPA: Works with Novatel Drivers after firmware update [http://www.dc-files.com/files/novatel/modems/EU870D/] - Sets device & vendor IDs to Novatel's original
 +
 +
'''Dell 640m''' - Detailed description of the 10.6-retail-installation & update to 10.6.8 waits [https://docs.google.com/document/d/%20123zS_v4KPwVAO4Ay6bjbmFw0p6jIqPddJ4MXfVniSTI/edit# here]
  
 
===Inspiron 1520===
 
===Inspiron 1520===
Line 1,810: Line 1,812:
  
 
*Install Method: iBoot Legacy 2.7.2 + 10.6 then 10.6.8 ComboUpdate
 
*Install Method: iBoot Legacy 2.7.2 + 10.6 then 10.6.8 ComboUpdate
*MB: EB, system utilies, Chimera, VoodooHDA 0.2.7.2
+
*MultiBeast: Easybeast, system utilies, Chimera, VoodooHDA 0.2.7.2
 
*Intel Dual Core T2080 (1.73 GHz): Out the Box, detected as Core Duo 1.73 GHz
 
*Intel Dual Core T2080 (1.73 GHz): Out the Box, detected as Core Duo 1.73 GHz
 
*Video: Intel GMA 950 works oob {{QE|Y}}
 
*Video: Intel GMA 950 works oob {{QE|Y}}
Line 1,831: Line 1,833:
 
laptop needs to restart once for the cpu fan spinning before ready for operation.
 
laptop needs to restart once for the cpu fan spinning before ready for operation.
 
</pre>
 
</pre>
 
=== Satellite A300-1G3 ===
 
Installation method: iATKOS S3 v2 + Combo Update 10.6.8 with USB and ACPI/PCI fixes
 
{{QE/CI|Y}}
 
{| class="wikitable" width="100%"
 
!Parts
 
!Device
 
!Working
 
!Notes
 
|-
 
|'''Processor'''
 
|Intel Core 2 Duo T5850 (2.16 GHz)
 
|Yes
 
|Out of the box
 
|-
 
|'''SATA'''
 
|Hard Disk (ICH8 Family)
 
|Yes
 
|Out of the box
 
|-
 
|'''PATA'''
 
|DVD+/-RW (ICH8 Family)
 
|Yes
 
|Out of the box
 
|-
 
|'''Graphics'''
 
|Intel GMA X3100
 
|Yes
 
|Out of the box, works only in 32-bits mode (boot with arch=i386 argument in Chameleon/Chimera)
 
|-
 
|'''Audio'''
 
|HDA
 
|Yes
 
|Out of the box
 
|-
 
|'''Wireless'''
 
|3945ABG b/g
 
|No
 
|I've replaced original 3945 with Atheros AR9285 and installed AR9285 kext, works fine as Airport.
 
|-
 
|'''USB'''
 
|ICH8M Family
 
|Yes
 
|Out of the box (After update to 10.6.8 you'll need to install USB fixes and boot with USBBusFix=Yes argument in Chameleon/Chimera)
 
|-
 
|'''Ethernet'''
 
|Realtek RTL8169 Fast Ethernet Controller
 
|Yes
 
|Install RTGNIC v.2.0.6 package, reboot, go into Apple Menu->System Preference->Network and configure your adapter, and you're good to go. (Note: this package also supports 8169S(SB)/8168(B/C/CP/D/E/F)/8101E/8102E/8103E/8105E network cards)
 
|-
 
|'''Battery'''
 
|Integrated
 
|Yes
 
|VoodooBattery.kext
 
|-
 
|'''FireWire'''
 
|TI PCIxx12 OHCI Compliant IEEE 1394 Host Controller
 
|Yes
 
|Out of the box
 
|-
 
|'''Card Reader'''
 
|Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
 
|Not tested
 
|
 
|-
 
|'''Touchpad'''
 
|Integrated PS/2
 
|Yes
 
|VoodooPS2Controller.kext
 
|-
 
|'''Modem'''
 
|Integrated
 
|No
 
|I´m not using it.
 
|-
 
|}
 
  
 
===Satellite A300-1EC===
 
===Satellite A300-1EC===
Line 2,045: Line 1,971:
  
 
===Satellite L650-078===
 
===Satellite L650-078===
* Install Method: iBoot Legacy 2.7.2 + Retail 10.6.0 DVD.  MB + Combo Update 10.6.8
+
* Install Method: iBoot Legacy 2.7.2 + Retail 10.6.0 DVD.  MultiBeast + Combo Update 10.6.8
 
* Processor: Core i3 M350 (@2.27)
 
* Processor: Core i3 M350 (@2.27)
 
* Audio: Conexant CX20671 (14F1:5069) - works with VoodooHDA (HDAEnabler kexts seem to cause a Kernel Panic)
 
* Audio: Conexant CX20671 (14F1:5069) - works with VoodooHDA (HDAEnabler kexts seem to cause a Kernel Panic)
Line 2,060: Line 1,986:
 
*# Remove IOPlatformPluginFamily.kext from /System/Library/Extensions/ (this is so that the combo update won't panic and kill your install).
 
*# Remove IOPlatformPluginFamily.kext from /System/Library/Extensions/ (this is so that the combo update won't panic and kill your install).
 
*# Reboot - usual flags "-v -x GraphicsEnabler=No"
 
*# Reboot - usual flags "-v -x GraphicsEnabler=No"
*# Launch the MB installer and proceed to the install options screen - but DO NOT actually click install yet.
+
*# Launch the MultiBeast installer and proceed to the install options screen - but DO NOT actually click install yet.
 
*# Run combo updater but DO NOT click the restart button when finished (if you do you need to go back to step one and begin again).
 
*# Run combo updater but DO NOT click the restart button when finished (if you do you need to go back to step one and begin again).
*# Flick back to MB and click the Install button now.  When complete allow the Combo update to restart.
+
*# Flick back to MultiBeast and click the Install button now.  When complete allow the Combo update to restart.
 
*# You know what to type now... but we shall soon avoid needing to do that.
 
*# You know what to type now... but we shall soon avoid needing to do that.
 
*# Install Chameleon (use the installer package and then update files manually if you really want).  Edit the /Extras/org.chameleon.Boot.plist file and add in our Kernel Flags in the appropriate places (there are guides out there to help with flags).  From this point on safe mode (-x) doesn't seem needed, but GraphicsEnabler=No is a MUST.
 
*# Install Chameleon (use the installer package and then update files manually if you really want).  Edit the /Extras/org.chameleon.Boot.plist file and add in our Kernel Flags in the appropriate places (there are guides out there to help with flags).  From this point on safe mode (-x) doesn't seem needed, but GraphicsEnabler=No is a MUST.
Line 2,104: Line 2,030:
  
 
*'''BIOS''': 2.20
 
*'''BIOS''': 2.20
*'''Install Method''': iBoot + 10.6.0 Retail Snow Leopard DVD (use arch=i386) + 10.6.8 (Combo update) + MB (did not use EB or UserDSDT, instead used a-la-carte method)
+
*'''Install Method''': iBoot + 10.6.0 Retail Snow Leopard DVD (use arch=i386) + 10.6.8 (Combo update) + MultiBeast (did not use EasyBeast or UserDSDT, instead used a-la-carte method)
 
*'''OsX Version''': Retail/Vanilla Kernel 10.6.8 (32-Bit) - Chameleon 2.0 RC5 Bootloader
 
*'''OsX Version''': Retail/Vanilla Kernel 10.6.8 (32-Bit) - Chameleon 2.0 RC5 Bootloader
 
*'''CPU''': Intel Core2Duo T3400 @ 2.16GHz, 1MB L2, 667MHz FSB, Intel GL40 Express Chipset
 
*'''CPU''': Intel Core2Duo T3400 @ 2.16GHz, 1MB L2, 667MHz FSB, Intel GL40 Express Chipset
Line 2,119: Line 2,045:
 
*'''ShutDown/Reboot''': Works
 
*'''ShutDown/Reboot''': Works
 
*'''Battery Indicator''': Works with Voodoo Battery kext
 
*'''Battery Indicator''': Works with Voodoo Battery kext
*'''Kexts/MB settings used''': VoodooHDA 0.2.72; FakeSMC; FakeSMC Motherboard Plugins; NullCPUPowerManagement; Voodoo PS/2 Controller; Voodoo Trackpad; Chimera v1.5.4 r1394; 32-bit Apple Boot Screen; Voodoo Battery
+
*'''Kexts/MultiBeast settings used''': VoodooHDA 0.2.72; FakeSMC; FakeSMC Motherboard Plugins; NullCPUPowerManagement; Voodoo PS/2 Controller; Voodoo Trackpad; Chimera v1.5.4 r1394; 32-bit Apple Boot Screen; Voodoo Battery
  
 
===Qosmio X505-Q885===
 
===Qosmio X505-Q885===
Line 2,140: Line 2,066:
 
===Qosmio X505-Q870===
 
===Qosmio X505-Q870===
  
*'''Install Method''': TonyMAc iboot 3.2.0 + Mb 3.10.1
+
*'''Install Method''': TonyMAc iboot 3.2.0 + Multibeast 3.10.1 [http://tonymacx86.blogspot.com/2010/04/iboot-multibeast-install-mac-os-x-on.html click here to download iboot and Multibeast and install instructions.]
 
*'''OSX Version''': 10.6.8 Retail Snow Leopard DVD
 
*'''OSX Version''': 10.6.8 Retail Snow Leopard DVD
 
*'''CPU''': Intel i7  
 
*'''CPU''': Intel i7  

Please note that all contributions to OSx86 may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see OSx86:Copyrights for details). Do not submit copyrighted work without permission!

Cancel | Editing help (opens in new window)
Powered by MediaWiki © 2015 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   PHP hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers