HCL 10.7.2

From OSx86
(Difference between revisions)
Jump to: navigation, search
m (Gigabyte)
(Other Accessories)
 
(240 intermediate revisions by more than 100 users not shown)
Line 11: Line 11:
 
!colspan=2| 32/64bit working ''with'' patches
 
!colspan=2| 32/64bit working ''with'' patches
 
|-
 
|-
|
+
|i-45cv
|
+
|i-45cv
|
+
|sleep not working,shutdown and reboot work, LAN works with Marvell Yukon 88E8056 drivers in iAtkos L2, HDMI Audio works using this guide: [http://tonymacx86.com/viewtopic.php?f=162&t=31947]. Audio works with custom VoodooHDA kext found here: [http://fyels.com.au/SLz]
|
+
|Voodoo HDA Patch: [http://fyels.com.au/SLz]
|Yes
+
|{{N}}
|Yes
+
|{{Y}}
 
|-
 
|-
 
|}
 
|}
Line 27: Line 27:
 
!Patches Used
 
!Patches Used
 
!colspan=2| 32/64bit working ''with'' patches
 
!colspan=2| 32/64bit working ''with'' patches
 +
|-
 +
|775i65G R2.0
 +
|Intel® 865G - ICH5
 +
|Sleep does not work. Everything else works fine 32bit ONLY!!!
 +
'''System Configuration:'''
 +
*CPU: Intel® Pentium® Processor E5300
 +
*Graphics: GeForce 6600 GT '''AGP''' 128MB
 +
*Audio: Cmedia 9761A on board, Audigy 2 PCI
 +
*LAN: Realtek PCI LAN 8101L on board
 +
*Memory: 2GB Dual Channel DDR400 (2x1GB)
 +
*HDD: Raptor 36GB Sata 3.5", Seagate 250GB Sata 2.5", Maxtor 40GB IDE
 +
onboard video card do not work (didt test...)!!!!!
 +
|Installation:
 +
* '''iAtkos L2''' dvd '''modded''' with [http://www.osx86.net/view/1824-ioatafamily_for_lion.html IOATAFamily for Lion] (a modded IOATAFamily (v2.5.1) from the 10.7.0 Lion Install Disk Image. It enables booting and installing from SATA IDE Enhanced/Compatible Mode. It's for those who can't boot/install with AHCI nor have this option in BIOS. ONLY FOR ICHx-based SATA chipsets/southbridges.)
 +
*Bootloader: chameleon 2.1
 +
*Bootloader options: built in ethernet, 32bit boot
 +
*Patches:
 +
**fakeSMC
 +
**Disabler: RTC
 +
**evoreboot
 +
*Drivers:
 +
**Main Hardware: NON ACHI SATA (don't forget or else no ich5 ide/sata support and you ll stuck on apple logo..)
 +
*PS/2 (choose if you have ps2 mouse or keyboard)
 +
'''Kexts:'''
 +
*Graphics: GeForce 6600 GT AGP 128MB [http://www.mediafire.com/?a3dnqwln2dm Aty_init.kext] 32bit ONLY from 10.6.x . bus shows agp as pcie !!! QE/CI works . at least i can see dvd, play chess, view youtube. OpenGLExtensionViewer 3.37 report Render: NVIDIA GEFORCE 6600 GT OpenGL Engine!! (tnx Netkas for ATY_Init.kext)
 +
*Audio: Cmedia 9761A on board [http://www.insanelymac.com/forum/topic/230356-updated-appleac97audio-for-snow-leopard-i386x86-64/ AppleAC97.kext] for Snow Leopard i386/x86_64 but works with LION i've tested 2inputs , 2outputs Volume slider don't work (classic bug...)
 +
*LAN: Realtek PCI LAN 8101L on board [http://osx86kexts.clanteam.com/browse.php PCGenRTL8139Ethernet.kext] 8139:10EC: Realtek RTL8139/810x Family Add-On and On-Board Fast Ethernet Driver (others .kexts give kp and slow download speeds so care)
 +
*
 +
*After install of iatkos l2 main system reboot and install all kexts with [http://cvad-mac.narod2.ru/Kext_Utility/Kext_Utility.app.v2.5.1.zip KextUtility] .
 +
*If you stuck try to boot with : -x -f -v arch=i386
 +
|{{Y}}
 +
|{{N}}
 
|-
 
|-
 
|G31M-S R2.0
 
|G31M-S R2.0
Line 33: Line 65:
 
'''System Configuration:'''
 
'''System Configuration:'''
 
*Intel Core 2 Quad Q8400
 
*Intel Core 2 Quad Q8400
*2 x 2GB 800MHz DDR2 RAM
 
 
*Gainward GTX 460 OC 1024MB
 
*Gainward GTX 460 OC 1024MB
*2x Western Digital 1TB HDD 7200rpm
 
 
onboard video card do not work!!!!!
 
onboard video card do not work!!!!!
 
|MultiBeast settings: EasyBeast, System Utilities, VoodooHDA 0.2.1, Chimera 1.5; Tutorial [http://bit.ly/rtxHsA here]
 
|MultiBeast settings: EasyBeast, System Utilities, VoodooHDA 0.2.1, Chimera 1.5; Tutorial [http://bit.ly/rtxHsA here]
Line 43: Line 73:
 
|Z68 Extreme 3 Gen 3
 
|Z68 Extreme 3 Gen 3
 
|Z68
 
|Z68
|Sleep, shutdown, and reboot all end up with a bios failure.  Do not press these on the OS.  Do it from the Case.  Have not figured out a fix, Dont want to break something.
+
|Sleep, shutdown, and reboot all work
 
'''System Configuration:'''
 
'''System Configuration:'''
 
*Intel Core i5-2500k
 
*Intel Core i5-2500k
*2x4GB DDR3-1600 G.Skill
 
 
*XFX Ati 4850 1GB  
 
*XFX Ati 4850 1GB  
*1tb Western Digital and 160gb Seagate 
 
 
*Wireless 802.11N Rt2860   
 
*Wireless 802.11N Rt2860   
 
*Stock audio     
 
*Stock audio     
*Mouse scroll is backwards, don't know how to fix
+
*Mouse scroll is backwards by default (can be fixed in the mouse settings)
 
|
 
|
*Multibeast 4.1.0, VoodooHDA, Ralink Kext must use arch=1386, chimera 1.6.0. [http://www.youtube.com/watch?v=KoaliM5Voug&context=C2b633ADOEgsToPDskKuwM7J6wugSI4EZkvy2qK6 Youtube video explaining by me.]
+
*Multibeast 4.1.0, VoodooHDA, Ralink Kext must use arch=1386, chimera 1.6.0, EVOREBOOT for reboot and shutdown [http://www.youtube.com/watch?v=KoaliM5Voug&context=C2b633ADOEgsToPDskKuwM7J6wugSI4EZkvy2qK6 Video]
 
*Must boot iatkos l2 using -v, might sit on saying could not find bootcache.  Let it sit for about 5-10 mins, it will come up with the installer.
 
*Must boot iatkos l2 using -v, might sit on saying could not find bootcache.  Let it sit for about 5-10 mins, it will come up with the installer.
 
|{{Y}}
 
|{{Y}}
Line 60: Line 88:
 
|H61M-VS
 
|H61M-VS
 
|Intel H61
 
|Intel H61
|Sleep, Onboard Audio and Integrated Graphics not tested. Everything else works fine.
+
|Sleep, Onboard Audio and Integrated Graphics ?. Everything else works fine.
 
'''System Configuration:'''
 
'''System Configuration:'''
 
*Pentium G620
 
*Pentium G620
*2 x 4GB 1333MHz DDR3 (Apacer 78.B1GDE.9LZ0C)
 
 
*Nvidia 8800GT 512MB
 
*Nvidia 8800GT 512MB
*Intel 320 40GB SSD
 
*WD15EARS HDD
 
 
*E-MU 0202 USB Audio Interface
 
*E-MU 0202 USB Audio Interface
 
|MyHack 2.0 RC4.1,  AtherosL1cEthernet.kext, AppleACPIPS2Nub.kext, ApplePS2Controller.kext
 
|MyHack 2.0 RC4.1,  AtherosL1cEthernet.kext, AppleACPIPS2Nub.kext, ApplePS2Controller.kext
Line 72: Line 97:
 
|{{Y}}
 
|{{Y}}
 
|-
 
|-
|asrock-wolfdale 1333-d667 R2.0[http://www.asrock.com/mb/overview.la.asp?Model=Wolfdale1333-D667%20R2.0]
+
|Wolfdale 1333-d667 R2.0[http://www.asrock.com/mb/overview.la.asp?Model=Wolfdale1333-D667%20R2.0]
 
|ICH7
 
|ICH7
 
|'''System Configuration:'''
 
|'''System Configuration:'''
 
*Intel Core2Duo @ 1.86 GHz
 
*Intel Core2Duo @ 1.86 GHz
*2x1GB 688MHz Ram
 
 
*Install Method: iATKOS L1 10.7.1  after update whit combo update lion 10.7.2
 
*Install Method: iATKOS L1 10.7.1  after update whit combo update lion 10.7.2
 
*Audio - VIA VT1708S Works!
 
*Audio - VIA VT1708S Works!
Line 88: Line 112:
 
|Patches
 
|Patches
 
*iATKOS L1 10.7.1 distro with special options VoodooHDA 2.0.1  and RTL81XX
 
*iATKOS L1 10.7.1 distro with special options VoodooHDA 2.0.1  and RTL81XX
*DVD-ROM & HDD connected to SATA6G_M9128 PCI-Express SATA addon controller and installed flawlesly.
+
*DVD-ROM & HDD connected to SATA6G_M9128 PCI-Express SATA addon controller and installed flawlesly.
 
*After installation download Multibeast and add the internet drivers for Official Realtek 2.0.6 driver for 81xx Ethernet controllers.
 
*After installation download Multibeast and add the internet drivers for Official Realtek 2.0.6 driver for 81xx Ethernet controllers.
 
*also if you have a ps/2 board use a numkey for laptop and you resolve the problem at the start that says before begin please connect a mouse that resolve that problem to resolve the problem whit icloud and app store just download the last version of chimera.
 
*also if you have a ps/2 board use a numkey for laptop and you resolve the problem at the start that says before begin please connect a mouse that resolve that problem to resolve the problem whit icloud and app store just download the last version of chimera.
Line 99: Line 123:
 
'''System Configuration:'''
 
'''System Configuration:'''
 
*Intel Core i5 2500K
 
*Intel Core i5 2500K
*1 x 4GB 1333MHz DDR3 RAM
 
 
*Asus HD 6950 DirectCu 2 1024MB[http://netkas.org/?p=959]
 
*Asus HD 6950 DirectCu 2 1024MB[http://netkas.org/?p=959]
*1x Western Digital 500 GB HDD
 
 
|
 
|
 
*MultiBeast settings: EasyBeast, System Utilities, ALC 8xx, Apple HDA Rollback, HDA Enabler
 
*MultiBeast settings: EasyBeast, System Utilities, ALC 8xx, Apple HDA Rollback, HDA Enabler
Line 111: Line 133:
 
|P55 Pro/USB3
 
|P55 Pro/USB3
 
|Intel P55
 
|Intel P55
|Slepp is not working, everything other works fine.
+
|Sleep is not working, everything other works fine.
 
'''System Configuration:'''
 
'''System Configuration:'''
 
*Intel Core i5 655K
 
*Intel Core i5 655K
*2 x 2GB Corsair 1333MHz DDR3 RAM
 
 
*Sapphire AMD HD6670 512MB - works out of the box
 
*Sapphire AMD HD6670 512MB - works out of the box
*2x Samsung 500GB SATA2
 
 
*Audio works Realtek ALC892
 
*Audio works Realtek ALC892
 
*Ethernet works - RTL8111E
 
*Ethernet works - RTL8111E
 
*Install method - iAtkos L1, after upgrade to 10.7.2
 
*Install method - iAtkos L1, after upgrade to 10.7.2
 
|
 
|
*MultiBeast settings: Lnx2Mac, alc8xxhda, non dst -> alc892, voodoohda 0.22
+
*MultiBeast settings: Lnx2Mac, alc8xxhda, non dst -> alc892, voodoohda 0.22
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|-
 
|-
 +
|[http://www.asrock.com/mb/overview.asp?Model=G41M-VS3 G41M-VS3]
 +
|G41, Intel (R) ICH7 SATA
 +
|Sleep does not work. Everything else works fine.
 +
'''System Configuration:'''
 +
*Intel Core 2 Duo E7500 2.93GHz
 +
*4 Gb RAM (2x2Gb DDR3)
 +
*PCIe Nvidia 9500GT 1Gb - onboard graphics ?
 +
*500Gb SATA HDD + 120Gb SATA HDD
 +
*Audio: VIA VT1705 works with VoodooHDA
 +
*LAN: Atheros AR8132L works with AtherosL1cEthernet.kext
 +
*USB: all working
 +
*SATA: working - IDE ?
 +
*USB keyboard and USB mouse needed for install, Apple wireless keyboard and trackpad work fine with USB bluetooth adapter
 +
*TP-Link WirelessN TL-WN851N (with AtherosFix.kext and VendorID added to IO80211Family.kext)
 +
*OOB Bios Settings work well (Legacy USB can be left ENABLED)
 +
|Installation: Retail (Used UniBeast to make bootable installer from 10.7.0 DMG) - Combo update to 10.7.2
 +
'''MultiBeast settings:'''
 +
*EasyBeast
 +
*System Utilities
 +
*VoodooHDA
 +
*MacPro 3,1 System definitions
 +
Use Atheros L1C for Snow Leopard[http://code.google.com/p/iats/] to enable ethernet. Appstore, Facetime and iCloud works fine.
 +
|{{Y}}
 +
|{{Y}}
 
|}
 
|}
  
Line 134: Line 178:
 
!Patches Used
 
!Patches Used
 
!colspan=2| 32/64bit working ''with'' patches
 
!colspan=2| 32/64bit working ''with'' patches
 +
|-
 +
|Asus Formula Maximus Special Edition
 +
|Intel® X38+ICH9 Chipset
 +
|'''System Configuration:'''
 +
* iATKOS L2 DVD
 +
* 2.67 GHz Quad-Core Intel Core 2 Quad Q9400
 +
* GPU: GeForce 7600 GT/256M
 +
* Audio: ASUS/SoundMAX Sound Card (Incl. w/MB)
 +
* BIOS Version: 1402
 +
|
 +
'''Component Status:'''
 +
* Network: Works w/ iATKOS Marvell 88E8056
 +
* SATA: Works w OOB
 +
* USB 2.0: Works OOB
 +
* Audio: Works OOB
 +
* Video: Works OOB
 +
* RTC: 32 bit Required.
 +
* SMC Untested
 +
* "Safe Sleep" Disabled
 +
* Built-in Audio Not Shown, but Works
 +
 +
'''Install Method:'''
 +
- iATKOS L2 DVD booted normally.
 +
* All add-ons required were included on disc.
 +
* Chimera boot loader
 +
* NVenabler
 +
* 32 bit RTC
 +
* Marvell 88E8056 Network
 +
 +
EthernetBuiltIn=Yes GraphicsEnabler=Yes
 +
|{{Y}}
 +
|{{N}}
 +
|-
 +
|P5GC-MX
 +
|Intel 945GC ICH7
 +
|'''System Configuration:'''
 +
* Intel E2140 1.60 GHz Pentium Dual-Core
 +
* GPU: Sapphire ATI Radeon HD 3650 512 MB (Not Working)
 +
* 2 GB Kingston PC-5300 DDR2-677 MHz SDRAM
 +
* BIOS Version: 0518
 +
 +
'''Component Status:'''
 +
* USB 2.0 works OOB
 +
* SATA works OOB
 +
* Restart & Shutdown works OOB
 +
|
 +
'''Install Method:'''
 +
iAtkos L2 DVD (standard installation)
 +
* On-Board Ethernet works with AtherosL2Ethernet.kext
 +
* On-Board Audio works with AppleHDA.kext and HDAEnabler.kext
 +
 +
'''Used PlistEdit Pro to edit org.chameleon.Boot.plist:'''
 +
*EthernetBuiltIn=Yes
 +
*GraphicsEnabler=No
 +
*npci=0x2000
 +
*UseKernelCache=Yes
 +
*Graphics Mode=1280x1024x32
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|Asus P5K
 +
|Intel® P35 chipset
 +
|'''System Configuration:'''
 +
* 2.5 GHz Quad-Core Intel Xeon
 +
* Keyboard: Dell SK-8135
 +
* Mouse: Logitech M305 Wireless
 +
* GPU: GeForce 8400 GS 512 MB
 +
* BIOS Version: 1201
 +
|
 +
'''Component Status:'''
 +
* Network: Works with AttansicL1Ethernet.kext
 +
* USB: 2.0 - OOB
 +
* SATA: Works OOB
 +
* Audio: Works with VoodooHDA.kext (3.7.3)
 +
* Restart/Shutdown: Works
 +
* Display: Dual Dell 2208WP on VGA/DVI
 +
* Hardware Sensors via latest 'FakeSMCv4_rev530_plugins'
 +
* Mouse: Scroll Reversed - used 'Scroll Reverser' to fix that
 +
* Sleep: who uses it...
 +
 +
'''Install Method:'''
 +
 +
- iAtkos L2 DVD (would not boot): So extracted pkg's and built a SSD with 10.7.2.Base.pkg and added all the Kext's below
 +
* Chameleon v2.1VS r1817
 +
* Kext's Used in S/L/E
 +
* NVDANV50Hal.kext - Modified with '0x10c310de&0xfff0ffff'
 +
* ACPIInjector.kext
 +
* AttansicL1Ethernet.kext - Gigabit Network Card (Built-In)
 +
* ElliottForceLegacyRTC.kext
 +
* EvOreboot.kext
 +
* FintekF718x.kext - Fixed boot msgs regarding 'Fintek F718x chipset found'
 +
* IntelCPUMonitor.kext
 +
* JMicron36xATA.kext
 +
* LegacyAppleYukon2.kext
 +
* NullCPUPowerManagement.kext
 +
* NVDAResman.kext - supports NVidia Card for Changing Resolution
 +
* VoodooHDA.kext - v3.7.3 for on board audio to work
 +
 +
*EthernetBuiltIn=Yes
 +
*GraphicsEnabler=Yes
 +
*Kernel Flags: npci=0x2000 darkwake=0
 +
*UseKernelCache=Yes
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|Asus P5Q-SE2
 +
|Intel® P45 chipset
 +
|'''System Configuration:'''
 +
* Intel® Core™2 Quad Q9400 @2.66Ghz
 +
* Keyboard: Genius PS2
 +
* Mouse: A4TECH X7 - USB
 +
* GPU: ASUS GTX 560 Ti DirectCU II TOP / 1GD5
 +
* BIOS Version: P5Q SE2 BIOS 0801
 +
* Audio: VIA VT1708S 8 Channels HD Audio CODEC
 +
* Network: Realtek RTL8168C/8111C PCIe Gb LAN
 +
* Memory: 8 GB DDR2 1066 KINGSTON HYPERX CL5
 +
|
 +
'''Component Status:'''
 +
* Network: Works 
 +
* USB: 2.0
 +
* SATA: Works
 +
* Audio: Works
 +
* Restart/Shutdown: Works
 +
* Display: 1680x1050 (32)
 +
*
 +
* Sleep: who uses it...
 +
 +
'''Install Method:'''
 +
 +
- iAtkos L2 DVD, Selecting:
 +
* Chameleon v2.1
 +
* Graphics Enabler
 +
* Fake SMC
 +
* Disabler
 +
* RTC
 +
* EVO Reboot
 +
* SATA / IDE
 +
* AHCI SATA
 +
* NON AHCI SATA
 +
* USB
 +
* NVIDIA GF100
 +
* Realtek RTL 8111/8168
 +
 +
-v npci=0x2000
 +
 +
- Installed [http://tonymacx86.blogspot.com.es/2012/05/multibeast-45-update.html MultiBeast for Lion (4.5)]before rebooting
 +
* Repair Permissions
 +
* Disk / 3rdParty eSATA
 +
* Disk / JMicron 36x ATA
 +
* NVIDIA 4xx/5xx Support
 +
* Lnx2Mac's RealtekRTL81xx Ethernet
 +
 +
- After that, I reboot and Install:
 +
* [http://www.osx86.net/view/1865-voodoohda_2.7.3_edit...via_vt1708s.html VoodooHDA 2.7.3 edited for Via VT1708S
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|Maximus IV Extreme-Z
 +
|Intel (R) Z68
 +
|'''System Configuration:'''
 +
* Intel i7-2600K CPU
 +
* Keyboard: Logitech G15
 +
* Mouse: Logitech G5
 +
* GPU: Nvidia GTX 580
 +
* BIOS Version: 0902
 +
|
 +
'''Component Status:'''
 +
* Network: Works with Intel KEXT
 +
* USB: 2.0 - OOB. 3.0 Doesn't work.
 +
USB 3.0 devices in USB 2 ports (and visa versa) work fine, USB 3.0 devices in USB 3.0 ports fail.
 +
* SATA: Works
 +
* Audio: Works with ALC8xx KEXT
 +
* Restart/Shutdown: Works
 +
* Sleep: Doesn't recover from sleep.
 +
 +
'''Install Method:'''
 +
 +
- iAtkos L2 DVD:
 +
* Chimera
 +
* Intel E1000 NIC KEXT
 +
* ALC8xxHDA.kext
 +
* ALC889 Enabler
 +
 +
*GTX 5XX Enabler(with cuda) for GPU [http://www.osx86.net/view/2074-gtx_5xx_enabler.html] (ignored PCIRootUID=1 npci=0x2000 requirements)
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|Asus P5E-Deluxe
 +
|Intel X48
 +
|'''System configuration:'''
 +
* Intel Core 2 Quad 9550K
 +
* Chipset Intel X48
 +
* ATI Sapphire 4870 Dual-DVI
 +
* Dual Display
 +
* Audio (SupremeFX II) works with drivers of iATKOS L2 (Only 2.0; Mic ?)
 +
* Audio (Logitech H360 Headset) works by default
 +
* LAN (Marvell88E8056) works with drivers of iATKOS L2
 +
* Wireless Adapter ASUS WL-138g V2 works by default
 +
|'''Installation method:'''
 +
- iATKOS L2 selecting:
 +
* Marvell Yukon 88E8056 kext
 +
* Voodoo HD Audio 2.2 kext
 +
* ATY_Init and ATI 48xx (Only to make work the dual monitor, dont have sure if that make the diference)
 +
 +
 +
'''Working:'''
 +
* Shutdown/Reboot
 +
* Mac App Store
 +
* iCloud
 +
* Logitech H360 Headset
 +
* Dual Monitor
 +
 +
'''NOT Working:'''
 +
* Sleep mode
 +
|{{Y}}
 +
|{{Y}}
 
|-
 
|-
 
|Asus Maximus IV Gene-z
 
|Asus Maximus IV Gene-z
Line 140: Line 400:
 
* Intel Core I7 2600K
 
* Intel Core I7 2600K
 
* Chipset Intel Z68
 
* Chipset Intel Z68
* 4 x 4GB Kingston 1333Hz DDR3 RAM
 
 
* Palit 570GTX 1280MB  
 
* Palit 570GTX 1280MB  
* 27inch Dual Display  
+
* Dual Display
* Raid0 2X 120GT OCZ SOLID3  Sata 6GT  WORKS OB
+
 
* Audio Works OB
 
* Audio Works OB
 
* Network Works OB  
 
* Network Works OB  
 
+
|
|Installation method:
+
''Installation method:'''
 
- iAtkos L2 selecting:
 
- iAtkos L2 selecting:
 
* Crimera 1.6.1
 
* Crimera 1.6.1
 
* VoodooHDA 2.6.3
 
* VoodooHDA 2.6.3
* Shutdown/Reboot work
+
 
 +
Shutdown/Reboot work
 
* Mac App Store WORKS!!!
 
* Mac App Store WORKS!!!
 
* iCloud WORKS!!!
 
* iCloud WORKS!!!
 
* MUST: Cpu Setting's [http://www.insanelymac.com/forum/index.php?showtopic=266525]
 
* MUST: Cpu Setting's [http://www.insanelymac.com/forum/index.php?showtopic=266525]
* 570GTX [http://www.insanelymac.com/forum/index.php?showtopic=260074&pid=1701923&mode=threaded&start=]
+
* 570GTX [http://www.insanelymac.com/forum/index.php?showtopic=260074&pid=1701923]
All working!!!
+
Updated to 10.7.2 works
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|Asus Maximus IV Gene-z
 +
|Intel Z68
 +
|System configuration:
 +
* Intel Core I5-2500 (not K)
 +
* Chipset Intel Z68
 +
* EVGA GTS 450 1 GB
 +
* Samsung 830 SSD 128 GB
 +
|Installation method:
 +
- iAtkos L2 selecting:
 +
* Chameleon
 +
*AHCI SATA and Trim
 +
* VoodooHDA 2.7.2
 +
*Hardware Sensors (CPU, MB, NVIDIA)
 +
*GF100 (open GL patch)
 +
*Intel Network Driver
  
Updated to 10.7.2: all working
+
Boots like magic!  Sleep appears to work!!!  You need to set your sound output in pref before speakers work.
| {{Y}}
+
|{{Y}}
| {{Y}}
+
|{{Y}}
 +
|-
 +
|Asus Maximus IV Gene-z
 +
|Intel Z68
 +
|System configuration:
 +
* Intel Core I5 2500K
 +
* Chipset Intel Z68
 +
* Asus 6870 DC 1GB
 +
* Single Display
 +
* Audio Works with kext
 +
* Network Works with kext
 +
|Installation method:
 +
- iAtkos L2 with MyHack chameleon boot only Selected ( + Extra won't work ) leave all at defaults
 +
* < WORKED BUT WITH FLAWS> Download latest VoodooHDA 2.7.2 and work
 +
* < UPDATED : WORKING SOUND WITH MIC & SPEAKERS - NO RANDOM KP >
 +
* Using MultiBeast 4.2.1 for LiON install EasyBeast and ALC8xxxHDA, AppleHDA Rolled Back, ALC889 Enabler ( must be 889, other won't work )
 +
* After installed it, USB will NOT WORK, must extract IOUSB file from Lion installer package and cp - r IOUSB*.* /Volumes/Your OSX Disk/System/Library/Extensions,
 +
copy to it, since I booting by iATKOS DVD itself, no command required and it just worked !
 +
Audio work like a charm now, both Micro and Output works, no kernel panic so far ( if installed only rolled back HDA, ALC, will get insta restart, EASY BEAST is a must for me ).
 +
* Shutdown/Reboot work
 +
* Network Card working from Stuffs of this good man : Network [http://www.insanelymac.com/forum/index.php?showtopic=266525], or Intel Gigabit network card come along inside MultiBeast package
 +
* Note : I 'm not using his hacked BIOS and still install well with MyHack Chameleon (boot only) + iATKOS L2.
 +
* Make PLL Voltages disabled in MainBoard and things should be fine ( got kernel panic if PLL Voltage on sometime )
 +
* My CPU is i5 2500k and I just leave it X.M.P Mode in AI Tweaker, CPU Auto ( not restrict ratio needed ilke i7 2600K - still working ).
 +
* 6870 works OOB with full Resolution 1920x1080, QE/CI ( chess played well )
 +
* Monitor :  Asus VS238H monitor
  
 +
 +
Conclusion : All working after installation with iATKOS L2 + myHack Chameleon, just Audio (Voodoo HDA 2.7.2) and Network (AppleIntelE1000.kext),
 +
Mic won't work with current setup, looking around of r fixes ( Fixes found using EasyBeast + ALC889 + HDA rollBack + ALC8xxxHDA ).
 +
|{{Y}}
 +
|{{Y}}
 
|-  
 
|-  
 
|Asus P5QL Pro
 
|Asus P5QL Pro
Line 167: Line 474:
 
|System configuration:
 
|System configuration:
 
* CPU: Q8300 2.5GHz Intel Core 2 Quad
 
* CPU: Q8300 2.5GHz Intel Core 2 Quad
* Chipset: Intel P43 & ICH10
+
* Chipset: Intel P43 ICH10
 
* BIOS: v1004
 
* BIOS: v1004
* RAM: 8GB (4x2GB Kingston DDR3-1333)
+
* Sata works no kext needed, turn on AHCI in BIOS
* Storage: 1TB Seagate 7200 RPM Sata 2 (Sata works no kext needed, turn on AHCI in BIOS)
+
* Optical: Pioneer DVD-RW DL 22x Sata 2
+
 
* Graphics: Zotac GTX 465 1GB GDDR5 (installed drivers from Multibeast,Graphics Enabler=Yes npci=0x2000)
 
* Graphics: Zotac GTX 465 1GB GDDR5 (installed drivers from Multibeast,Graphics Enabler=Yes npci=0x2000)
 
* Audio: Realtek ALC1200, Used ALC1200_1063 AppleHDA.kext (from tonymacx86)
 
* Audio: Realtek ALC1200, Used ALC1200_1063 AppleHDA.kext (from tonymacx86)
 
* LAN: Atheros 1LE, Used AttansicL1eEthernet.kext (from tonymacx86)
 
* LAN: Atheros 1LE, Used AttansicL1eEthernet.kext (from tonymacx86)
 
* Shutdown and reboot work perfectly
 
* Shutdown and reboot work perfectly
 
 
|Installation method:
 
|Installation method:
 
- Retail (Used UniBeast to make bootable installer from 10.7.0 DMG)
 
- Retail (Used UniBeast to make bootable installer from 10.7.0 DMG)
Line 185: Line 489:
 
* Installed AttansicL1eEthernet.kext and AppleHDA.kext for ALC1200 using Kextbeast before reboot
 
* Installed AttansicL1eEthernet.kext and AppleHDA.kext for ALC1200 using Kextbeast before reboot
 
* After reboot, went to audio settings to select Line Out
 
* After reboot, went to audio settings to select Line Out
* Everything works perfectly if you use AppleHDA.kext for the ALC1200, if you try VoodooHDA, it will kernel panic on boot.
+
 
| {{Y}}
+
Everything works perfectly if you use AppleHDA.kext for the ALC1200, if you try VoodooHDA, it will kernel panic on boot.
| {{Y}}
+
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|Asus P5GC-MX/1333
 +
|Intel 945GC / Intel ICH7
 +
|System configuration:
 +
* CPU: Intel Core2duo E4500 (2m Cache, 2.20 Ghz) OC @2.7Ghz
 +
* Ram: 2 x 1Gb. Supertalent ddr2
 +
* Chipset: Intel 945GC / Intel ICH7
 +
* Sata : Works
 +
* Graphics: XFX Geforce 9500GT 1Gb ddr2 hdmi-dvi-vga : Full works
 +
* Audio:  full work
 +
* LAN: work
 +
* Shutdown and reboot work perfectly
 +
|Installation method:
 +
* iAtkos L2 DVD
 +
* Selected VoodooHDA (last version) for audio
 +
* Selected NVEnabler  for Graphics card
 +
* Installed AttansicL1eEthernet.kext  using Kextbeast before reboot
 +
|{{Y}}
 +
|{{Y}}
 
|-
 
|-
 +
|Asus P5SD2-VM
 +
|SIS 672 + SIS 968
 +
|'''System configuration:'''
 +
* CPU: Intel Celeron Dual Core E1400 @ 2Ghz (Stock)
 +
* Ram: 2 x 1Gb. Crucial DDR2
 +
* Graphics: GeForce 6200LE
 +
* WLAN: ASUS WL-167G V3 USB Adaptor (Works w/ official drivers)
  
 +
'''Status:'''
 +
* SATA : Works OOB
 +
* PATA ODD: No access to IDE Optical Drive
 +
* Shutdown and Reboot: Working OOB
 +
* Audio:  Working with VoodooHDA
 +
* Onboard LAN: Not tested
 +
* Onboard Video: Not tested
 +
|Installation method:
 +
* BIOS settings were essentially OOB/Stock - very few changes (the general/well documented ones at that!)
 +
* iAtkos L2 USB Installer (Made using 'dd' on Fedora Linux)
 +
* Had slight issues with a USB hub whilst attempting to load the installer (these issues did not persist)
 +
* I had to boot using '''npci=0x2000 GraphicsEnabler=No''' the second flag being for my unsupported GFX Card
 +
* Installed VoodooHDA (last version) from MultiBeast post-install for Audio
 +
 +
 +
I later upgraded this machine to:
 +
* Intel Celeron Dual Core E3300 @ 2.5Ghz (Stock)
 +
* 2 x 2GB Crucial DDR2
 +
* Nvidia GeForce GT520 1GB
 +
* Sony Optiarc SATA ODD (DVD Multi-Writer)
 +
 +
Has comfortably dual booted with both Linux and Windows 8.
 +
|{{Y}}
 +
|{{Y}}
 
|-
 
|-
 
|Asus P8P67
 
|Asus P8P67
Line 196: Line 551:
 
* Intel Core I5
 
* Intel Core I5
 
* Chipset Intel P67
 
* Chipset Intel P67
* 4 x 4GB Kingston 1333Hz DDR3 RAM
 
 
* Asus Radeon 5770 1024MB  
 
* Asus Radeon 5770 1024MB  
 
* Audio No Works
 
* Audio No Works
 
* Network Works with offical driver from realtek.com or MultiBeast
 
* Network Works with offical driver from realtek.com or MultiBeast
 
 
|Installation method:
 
|Installation method:
 
- Any iso from internet, mac lion + MultiBeast:
 
- Any iso from internet, mac lion + MultiBeast:
* Driver &amp; Bootloaders =&gt; Kexts &amp; Enablers =&gt; Realtek ALC8xx =&gt; ALC8xxHDA
+
* ALC8xxHDA
* Driver &amp; Bootloaders =&gt; Kexts &amp; Enablers =&gt; Realtek ALC8xx =&gt; AppleHDA Rollback
+
* AppleHDA Rollback
* Driver &amp; Bootloaders =&gt; Kexts &amp; Enablers =&gt; Realtek ALC8xx =&gt; Non-DSDT HDAEnabler =&gt; ALC892
+
* Non-DSDT HDAEnabler/ ALC892
* Driver &amp; Bootloaders =&gt; Kexts &amp; Enablers =&gt; Network =&gt; Lnx2Mac's RealtekRTL81xx Ethernet
+
* Lnx2Mac's RealtekRTL81xx Ethernet
* Driver &amp; Bootloaders =&gt; Kexts &amp; Enablers =&gt; Miscelleneous =&gt; FakeSMC
+
* FakeSMC
* Driver &amp; Bootloaders =&gt; Kexts &amp; Enablers =&gt; Miscelleneous =&gt; FakeSMC Plugins =&gt; Motherboard Plugins
+
* Motherboard Plugins
* Driver &amp; Bootloaders =&gt; Kexts &amp; Enablers =&gt; Miscelleneous =&gt; FakeSMC Plugins =&gt; Nvidia Plugin
+
* Nvidia Plugin
* Driver &amp; Bootloaders =&gt; Kexts &amp; Enablers =&gt; Miscelleneous =&gt; NullCPUPowerManagement
+
* NullCPUPowerManagement
  
 
USB3 and build GPU not work for me.
 
USB3 and build GPU not work for me.
  
Updated to 10.7.2: all working
+
Updated to 10.7.2: all working<br />
| {{Y}}
+
| {{Y}}
+
  
 +
 +
Updated Asmedia USB 3.0 for Rev3.1 [http://uk.asus.com/Motherboards/Intel_Socket_1155/Maximus_IV_GENEZGEN3/#download
 +
Download and install USB 3.0 Boost Full Package Version V1.00.05]
 +
|{{Y}}
 +
|{{Y}}
 
|-
 
|-
 +
|Asus P8H61
 +
|Intel H61
 +
|System configuration:
 +
* Intel Core I3 2100
 +
* Chipset Intel H61
 +
* ASUS EN210 (GeForce 210) 1GB
 +
* Monitor: Samsung SyncMaster 1360x768
 +
* Audio Works
 +
* Network Works
 +
|Installation method:
 +
- iAtkos L2 selecting:
 +
* Crimera 1.7
 +
* VoodooHDA
 +
* Ev0reboot
 +
* Mac App Store, iCloud, Facetime WORK with EthernetBuiltin in smbios ( I used MacPro3,1)
 +
* Graphic Enabler
 +
* Lnx2Mac's RealtekRTL81xx Ethernet
 +
* Select AHCI and set in Bios AHCI Mode
 +
* FakeSMC
 +
 +
All working!! Only Sleep seems not work.
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|P8H61-M LX
 +
|Intel H61
 +
|'''System configuration:'''
 +
* Intel Core i5 3,3GHz
 +
* Nvidia GTX 560 2GB
 +
* Audio: ALC 667
 +
* Network: RLT8111E
 +
* Memory: 8GB Kingston RAM
 +
|Installation method:
 +
* iAtkos L2
 +
* Select AHCI and set in Bios AHCI Mode
 +
* [http://www.osx86.net/view/2585-chameleon_2.1_r1910_-_mountain_lion_%5Bupdated%5D.html Newest Chameleon bootloader]
 +
* [http://www.osx86.net/downloads.php?do=file&id=2074 GTX 5XX enabler]
 +
* Lnx2Mac's RealtekRTL81xx Ethernet
 +
* FakeSMC
 +
* [http://code.google.com/p/xnu-sleep-enabler/ SleepEnabler]
 +
* [http://www.osx86.net/view/2589-asus_p8h61-m_lx_fixes.html Fixed DSDT by me :)]
 +
* VoodooHDA 2.7.2 with info.plist modified:
 +
<key>iGain</key>
 +
<br />
 +
<string>0</string>
 +
<br />
 +
<key>iMix</key>
 +
<br />
 +
<string>70</string>
 +
<br />
 +
<key>Mic</key>
 +
<br />
 +
<string>70</string>
 +
 +
 +
Works perfectly including Sleep, Audio, Microphone, Mac App Store, FaceTime...
 +
<br />
 +
Dual booting with Windows 7.
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|Asus P8P67 LE
 +
|Intel P67
 +
|System configuration:
 +
* Intel Core i7 2600k OC to 4.4 Ghz
 +
* Chipset Intel P67
 +
* Kingston genesis hyperX 1600 Mhz DDR3
 +
* Motherboard integrated audio works with realtek drivers from multibeast or iAtkos customize
 +
* Network Works with multibeast realtek driver
 +
* MSI N550 GTX Ti OC edition
 +
|Installation method:
 +
- I used iAtkos L2 DVD
 +
* ALC8xxHDA
 +
* AppleHDA Rollback
 +
* Non-DSDT HDAEnabler/ ALC892
 +
* Lnx2Mac's RealtekRTL81xx Ethernet
 +
* FakeSMC
 +
* Motherboard Plugins
 +
* Graphics enabler
 +
* NullCPUPowerManagement
 +
* Bootloader Chameleon
 +
* system definition either imac or mac pro
 +
 +
 +
USB3 does not work. do not install USB3 driver from either customize setup or from multibeast.
 +
will cause force restart problem screen
 +
 +
Updated to 10.7.2: all working<br />
 +
|{{Y}}
 +
|{{Y}}
 
|-
 
|-
 
|Asus Maximus IV Gene-z
 
|Asus Maximus IV Gene-z
Line 225: Line 671:
 
* Intel Core I7 2600K
 
* Intel Core I7 2600K
 
* Chipset Intel Z68
 
* Chipset Intel Z68
* 4 x 4GB Kingston 1333Hz DDR3 RAM
 
 
* Palit 570GTX 1280MB  
 
* Palit 570GTX 1280MB  
* 27inch Dual Display  
+
* Dual Display  
* Raid0 2X 120GT OCZ SOLID3  Sata 6GT  WORKS OB
+
 
* Audio Works OB
 
* Audio Works OB
 
* Network Works OB  
 
* Network Works OB  
 
 
|Installation method:
 
|Installation method:
 
- iAtkos L2 selecting:
 
- iAtkos L2 selecting:
Line 240: Line 683:
 
* iCloud WORKS!!!
 
* iCloud WORKS!!!
 
* MUST: Cpu Setting's [http://www.insanelymac.com/forum/index.php?showtopic=266525]
 
* MUST: Cpu Setting's [http://www.insanelymac.com/forum/index.php?showtopic=266525]
* 570GTX [http://www.insanelymac.com/forum/index.php?showtopic=260074&amp;pid=1701923&amp;mode=threaded&amp;start=]
+
* 570GTX [http://www.insanelymac.com/forum/index.php?showtopic=260074   pid=1701923   mode=threaded   start=]
 +
 
 
All working
 
All working
  
 
Updated to 10.7.2: all working
 
Updated to 10.7.2: all working
| {{Y}}
+
|{{Y}}
| {{Y}}
+
|{{Y}}
|-
+
 
|-
 
|-
 
|P5N-E SLI
 
|P5N-E SLI
Line 256: Line 699:
 
* LAN Nvidia Lan
 
* LAN Nvidia Lan
 
* Audio Realtek ALC883  
 
* Audio Realtek ALC883  
* 2 x 2GB Kingston 800MHz DDR2 RAM
 
 
* HIS AMD HD6670  
 
* HIS AMD HD6670  
* 2xHD ide (Snow iAtkos 10.6.6, iAtkos L1 updated 10.7.2)
 
* 1xHD sata (Windows 7)
 
* 1xDVD RW ide
 
 
|Installation method:
 
|Installation method:
 
- iAtkos L1 selecting:
 
- iAtkos L1 selecting:
 
* Chameleon 2.0
 
* Chameleon 2.0
 
* VoodooHDA 2.6
 
* VoodooHDA 2.6
add manually kexts for Nvidia ATA &amp;amp;amp;amp;amp; Nvidia LAN
+
add manually kexts for Nvidia ATA   amp;amp;amp;amp; Nvidia LAN
 
(see verdant post on insanelymac.com) into folder system of installation flash
 
(see verdant post on insanelymac.com) into folder system of installation flash
 
after installation add above kexts into system\library\extention and repair permission
 
after installation add above kexts into system\library\extention and repair permission
 
after load system by kext utility.
 
after load system by kext utility.
 +
 
All working!!!
 
All working!!!
 
Updated to 10.7.2: all working
 
Updated to 10.7.2: all working
| {{Y}}
+
|{{Y}}
| {{Y}}
+
|{{Y}}
|-
+
 
+
|-
+
 
+
 
+
 
|-
 
|-
 
|P5K-E/WiFi AP Solo
 
|P5K-E/WiFi AP Solo
Line 288: Line 723:
 
* ASUS WiFi-AP Solo 54 Mbps IEEE 802.11g  
 
* ASUS WiFi-AP Solo 54 Mbps IEEE 802.11g  
 
* Audio ADI® AD1988B  
 
* Audio ADI® AD1988B  
* 2 x 2GB Kingston 800MHz DDR2 RAM
 
 
* Point Of Wiew nVidia GeForce 8600GT 1024MB  
 
* Point Of Wiew nVidia GeForce 8600GT 1024MB  
* 5xHD Sata (Xp, 7, iDeneb 10.5.6, Snow Hazard 10.6.2, iAtkos L1 updated 10.7.2)
 
* 1xHD Ide (Ubuntu 11.04)
 
* 1xDVD RW DL Lightscribe
 
 
* 1xInternal card reader and additional Usb ports
 
* 1xInternal card reader and additional Usb ports
 
 
|Installation method:
 
|Installation method:
 
- iAtkos L1 selecting:
 
- iAtkos L1 selecting:
Line 304: Line 734:
 
* LAN Marvell
 
* LAN Marvell
 
* WiFi RTL81xx
 
* WiFi RTL81xx
 +
 
All working!!!
 
All working!!!
  
 
Updated to 10.7.2: all working
 
Updated to 10.7.2: all working
| {{Y}}
+
|{{Y}}
| {{Y}}
+
|{{Y}}
 
|-
 
|-
 
|-
 
 
 
|P5QL-E
 
|P5QL-E
 
|P43
 
|P43
Line 318: Line 746:
 
*Q6600
 
*Q6600
 
*ASUS 4670
 
*ASUS 4670
*4GB (4x1) 800 Mhz Kingston
 
 
*Audio ALC1200 works (use VoodooHDA_0.2.56.pkg.zip)  
 
*Audio ALC1200 works (use VoodooHDA_0.2.56.pkg.zip)  
 
*Atheros AR8121/... works
 
*Atheros AR8121/... works
 
*USB 2.0 Works OOB
 
*USB 2.0 Works OOB
*60GB OCZ SSD
 
*1TB Samsung HDD
 
 
|Patches
 
|Patches
 
* Easybeast (but don't use audio drivers, install separately)
 
* Easybeast (but don't use audio drivers, install separately)
 
* Chimera )
 
* Chimera )
| {{Y}}
+
|{{Y}}
| {{Y}}
+
|{{Y}}
|-
+
 
+
 
|-
 
|-
 
|P5QL-EM
 
|P5QL-EM
Line 337: Line 760:
 
*Q6600
 
*Q6600
 
*ATI Radeon HD 4870
 
*ATI Radeon HD 4870
*4GB (2x2) 800 Mhz Corsair
 
 
*USB 2.0 Works OOB
 
*USB 2.0 Works OOB
*1TB WD HDD
 
 
|Patches
 
|Patches
 
* Easybeast
 
* Easybeast
Line 345: Line 766:
 
* ATI 48xx
 
* ATI 48xx
 
* Ethernet
 
* Ethernet
Install Method: [http://tonymacx86.blogspot.com/2011/10/unibeast-install-mac-os-x-lion-using.html Unibeast Based]
+
Install Method:
| {{Y}}
+
|{{Y}}
| {{Y}}
+
|{{Y}}
 
|-
 
|-
 +
|P5QL-EPU
 +
|Intel P43
 +
|System Configuration:
 +
* CPU: E7500 @ 2.93 GHZ Intel Core 2 Duo
 +
* Chipset: Intel P43 ICH10
 +
* HDD: SATA AHCI (Turn on AHCI on BIOS)
 +
* Graphics: Point of View nVidia GeForce 9800GT 1024MB DDR3 - NVEnabler
 +
* Audio: VIA VT1708S - VoodooHDA 2.7.3
 +
* Lan: Realtek 8111C - Realtek RTL8111/8168
 +
* Shutdown and Reboot works (sleep seem doesn't working)
 +
|Installation:
 +
- iAtkos L2 (with no boot flags)
 +
* Bootloader: Chameleon 2.1
 +
* Bootloader Options: Built-in Ethernet
 +
* Patches: FakeSMC,Disabler,RTC,EvOreboot
  
 
+
Some Issues:
 +
* VoodooHDA (Sound Crackles and Volume Slider) Guide: [http://www.insanelymac.com/forum/index.php?showtopic=267905 VoodooHDA Common Problems]
 +
* Time Issues (With Multiboot Windows/OSX86) Guide: [http://www.insanelymac.com/forum/index.php?showtopic=264769 Multiboot Time Fix Guide]
 +
|{{Y}}
 +
|{{Y}}
 
|-
 
|-
 
|P5W DH Deluxe WIFI
 
|P5W DH Deluxe WIFI
Line 357: Line 797:
 
*Intel E6400 CPU 2,13 GHz @ Overclocking 2,67 GHz
 
*Intel E6400 CPU 2,13 GHz @ Overclocking 2,67 GHz
 
*ATI Radeon X1800XT (256MB DDR3 256Bit) works, high performance...
 
*ATI Radeon X1800XT (256MB DDR3 256Bit) works, high performance...
*DDR2 4GB (4x1) 834 MHz (OCZ Platinum Rev.2)
 
 
*Install Method: RETAIL Disk Image...
 
*Install Method: RETAIL Disk Image...
 
'''Components Status:'''
 
'''Components Status:'''
*Audio ALC882M Stereo L+R - Line-Out x3 24bit, Line-In x1 20bit, Integrated microphone x1 20bit, Headphones Integrated x1 24bit, S/PDIF out x1 32bit (+ Info System Profiler)
+
*Audio ALC882M Stereo L+R - Line-Out x3 24bit, Line-In x1 20bit, Integrated microphone x1 20bit,  
 +
Headphones Integrated x1 24bit, S/PDIF out x1 32bit (+ Info System Profiler)
 
*Ethernet - Native Works (Marvell Yukon Gigabit)
 
*Ethernet - Native Works (Marvell Yukon Gigabit)
 
*Wireless RTL8187 b/g - Works
 
*Wireless RTL8187 b/g - Works
Line 370: Line 810:
 
*100% COMPATIBLE
 
*100% COMPATIBLE
 
|Patches
 
|Patches
*Kext mod.
+
*Kext mod. PIEROF81
 +
*Audio Kext: [http://www.osx86.net/view/1748-alc882_lion_for_asus_-_mic,_loud_sound!.html]
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
Line 376: Line 817:
 
|P5E3 Premium/Wifi-AP
 
|P5E3 Premium/Wifi-AP
 
|Intel X48 - ICH9R SATA
 
|Intel X48 - ICH9R SATA
|Intel Q9550 CPU 2.82 GHz @ 3.4 GHz
+
|
*ATI HD4870 TOXIC (512MB) works with InJector+Patch
+
*Intel Q9550 CPU 2.82 GHz @ 3.4 GHz
*4x2GB 1600 MHz Ram
+
*Corsair Xms3 1600MHz (4x2Gb)
*Audio - works (bad)
+
*ATI HD4870 TOXIC (512MB) - Works with InJector+Patch
 +
*Audio - Works (bad)
 
*Ethernet - Works
 
*Ethernet - Works
 
*WiFi - Works likely [http://code.google.com/p/p5e3-dsdt/wiki/RalinkRT2770F AirportExtreme]
 
*WiFi - Works likely [http://code.google.com/p/p5e3-dsdt/wiki/RalinkRT2770F AirportExtreme]
*USB - All Works
+
*USB - Works (all)
*Shutdown/Reboot works
+
*Shutdown/Reboot - Works
 
+
*Sleep - Not work
Installation method: [http://tonymacx86.blogspot.com/2011/07/xmove-multibeast-install-os-x-107-lion.html xMove + MultiBeast]
+
|
 +
'''Installation method:'''
 
*Client update 10.7.2
 
*Client update 10.7.2
  
Needed:  
+
'''Needed:'''
* [http://wiki.osx86project.org/wiki/index.php/HCL_10.6.8 OSX SnowLeopard] installed yet
+
*[http://wiki.osx86project.org/wiki/index.php/HCL_10.6.8 OSX SnowLeopard] installed yet
* Original Lion 10.7.0
+
*Original Lion 10.7.0
* Client Update 10.7..2
+
*Client Update 10.7.2
  
After Install:
+
'''After Install:'''
* Install Update * (DON'T RESTART!)
+
*Install Update * (DON'T RESTART!)
* In MultiBeast check EasyBeast - VoodooHDA 2.7.3 - Realtek Gigabit
+
*In MultiBeast check EasyBeast - VoodooHDA 2.7.3 - Realtek Gigabit
* Restart
+
*Restart
|
+
''Patches'''
+
* [http://www.insanelymac.com/forum/index.php?showtopic=199816 Kext and DSDT] updated
+
* Repository code [http://code.google.com/p/p5e3-dsdt/source/browse/dsdt.dsl?repo=premium DSDT]
+
 
+
| {{Y}}
+
| {{Y}}
+
|-
+
  
  
 +
'''Patches'''
 +
*[http://www.insanelymac.com/forum/index.php?showtopic=199816 Kext and DSDT] updated
 +
*Repository code [http://code.google.com/p/p5e3-dsdt/source/browse/dsdt.dsl?repo=premium DSDT]
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 
|P6X58D-E
 
|P6X58D-E
 
|X58
 
|X58
|Bootloader is slow but works tested with 10.7.0 /1 /2
+
|Bootloader works tested with 10.7.0 /1 /2 only using USB method users using iAtkos get ready to to way long to boot.
|LAN Kext (Adapter 88E8056 AppleYukon2.kext) and audio Kext ALC8XX + applehda rollback using multibeast.
+
|LAN Kext (Adapter 88E8056 AppleYukon2.kext found
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|-
 
|-
 
 
|P8P67 LE
 
|P8P67 LE
 
|P67
 
|P67
Line 426: Line 866:
 
|'''System Configuration:'''
 
|'''System Configuration:'''
 
*Intel Q9400 CPU 2.66 GHz @ 3.66 GHz
 
*Intel Q9400 CPU 2.66 GHz @ 3.66 GHz
*8400GS (256MB) works fully with ''GraphicsEnabler=y''
+
*8400GS (256MB) works fully with GraphicsEnabler=y
*2x2GB 800 MHz Ram
+
 
*Install Method: Retail Disk Image boot with [http://osx86.sojugarden.com/installer/ myHack], then Apple Software Update to 10.7.2
 
*Install Method: Retail Disk Image boot with [http://osx86.sojugarden.com/installer/ myHack], then Apple Software Update to 10.7.2
'''Components Status:'''
+
Components Status:
 
*Audio Out - ALC888; 3.5mm Headphones works, S-PDIF works, 5.1 surround 3.5mm outputs don't work (sub, r-left etc...).
 
*Audio Out - ALC888; 3.5mm Headphones works, S-PDIF works, 5.1 surround 3.5mm outputs don't work (sub, r-left etc...).
*Audio In - ALC888; Line-in works, to use a unpowered mic you need a amp or sound card, [http://www.ebay.co.uk/itm/110761587497?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_1630wt_1376 this card works].
+
*Audio In - ALC888; Line-in works, to use a unpowered mic you need a amp or sound card, [http://www.ebay.co.uk/itm/110761587497?ssPageName=STRK:MEWNX:IT&amp;amp;_trksid=p3984.m1497.l2649#ht_1630wt_1376 this card works].
 
*Ethernet - Realtek, RTL8110SC; untested. Marvell, Yukon 88E8056; works, tested @ 100 Mbit/s.
 
*Ethernet - Realtek, RTL8110SC; untested. Marvell, Yukon 88E8056; works, tested @ 100 Mbit/s.
 
*Wireless b/g - Works, but shows up as 'Ethernet' not 'AirPort'. (See patch column)
 
*Wireless b/g - Works, but shows up as 'Ethernet' not 'AirPort'. (See patch column)
Line 441: Line 880:
 
|Patches
 
|Patches
 
*[http://osx86.sojugarden.com/installer/ myHack (chameleon + other stuff)]
 
*[http://osx86.sojugarden.com/installer/ myHack (chameleon + other stuff)]
*[http://eurico.net/files/driver_wlan_usb_snow.zip ''Built-in'' Realtek Wireless (RTL8187B)]
+
*[http://eurico.net/files/driver_wlan_usb_snow.zip Built-in Realtek Wireless (RTL8187B)]
*Add the ''italics'' text below to your '''boot.plist''' to stop an App Store verification error.
+
*Add the ''italics'' text below to your boot.plist to stop an App Store verification error.
:''<key>EthernetBuiltIn</key>''
+
:<key>EthernetBuiltIn</key>
:''<string>Yes</string>''
+
:<string>Yes</string>
 
Useful Tools
 
Useful Tools
 
*[http://code.google.com/p/osx86tools/downloads/detail?name=OSX86Tools_1.0.150.zip OSX86Tools]
 
*[http://code.google.com/p/osx86tools/downloads/detail?name=OSX86Tools_1.0.150.zip OSX86Tools]
Line 453: Line 892:
 
|-
 
|-
 
|P5KPL-AM/PS
 
|P5KPL-AM/PS
|Intel (R) G31
+
|Intel (R) G31 ,ICH7
 
|'''Hardware:'''
 
|'''Hardware:'''
* Intel Pentium Dual-Core E5400 2.70 GHz @3.24 GHz
+
* Intel Pentium Dual-Core E5400 2.70 GHz
* 2x2GB DDR2 RAM Kingston 800 Mhz (Dual-Channel Interleaved mode)
+
 
* WD Cavier Blue 500 GB SATA II Cache 16 MB (No AHCI)
 
* WD Cavier Blue 500 GB SATA II Cache 16 MB (No AHCI)
* Keyboard: MDtech USB Keyboard (Fully Support)
+
* Keyboard: MDtech USB Keyboard
* Mouse: hardware house USB
+
* GPU: inno3d GeForce 9500 GT 1 GB DDR2 (Used HDMI & DVI)
* GPU: inno3d GeForce 9500 GT 1 GB DDR2
+
* Monitors : Acer S202HL 1600x900 LED (Main) + PHILIPS 150E 1024x768 LCD
+
 
* BIOS : AMI 0502
 
* BIOS : AMI 0502
* PSW : 500 W
+
* Monitors : Acer S202HL 1600x900 + PHILIPS 150E 1024x768
 
+
* PSW 500 W
 +
* Ram Kingston DDR2 800 MHz 2x2 =4 GB
 +
|
 
'''Notes'''
 
'''Notes'''
* DSDT from DSDTSE + modify to remove all warning (not important)
+
* Start with iATKOS L1
* Delete unnecessary,unwant,panic kexts (about 40 kexts)
+
* No DSDT
* Chameleon 2.1svn r1573 from Chameleon Wizard
+
* Delete unnecessary,unwant,panic kexts
* org.chameleon.Boot.plist (com.apple.Boot.plist) = UseKernelCache=Yes ,arch=x86_64 ,EthernelBuiltin=Yes ,Generate P&amp;amp;amp;amp;amp;C States ,USB Bus Fix ,VBIOS (I think this stop KERNEL PANIC)
+
* Delete unused LaunchDaemons and LaunchAgents
* Dual-Boot Windows 7 Ultimate 64 bit + Mac OSX Lion 10.7.2 GM **(Install Chimera 1.5.4 FIRST and then install chameleon 2.1svn)**
+
* Tweak all things that you can think of
* smbios.plist --&amp;amp;amp;amp;gt; iMac 11,1 (found the best for pentium dual-core ;) )
+
* Tweak using MacPilot ,TinkerTool
 +
* Update to Chameleon 2.1svn r1752 from Champlist
 +
* org.chameleon.Boot.plist = UseKernelCache=Yes ,arch=x86_64 ,EthernelBuiltin=Yes ,USB Bus Fix ,VBIOS=Yes
 +
* Mac OS X Lion 10.7.2 64 bit
 +
* smbios.plist -- iMac 11,1 (found the best for pentium dual-core ;) )
 +
* Boot time : Greatest : 19 seconds
 +
* GeekBench max scores (64-bit) : 4154 ( NO Overclocking )
  
|'''Kexts'''
+
 
 +
'''Kexts'''
 
* VoodooHDA.kext (Latest) (Fix noise with Vectorize=Yes (Others boolean like this are Enabled) in info.plist in this kext)
 
* VoodooHDA.kext (Latest) (Fix noise with Vectorize=Yes (Others boolean like this are Enabled) in info.plist in this kext)
* Fakesmc.kext from Multibeast 4.0.2
+
* Fakesmc.kext
 
* NullCpuPowerManagement.kext
 
* NullCpuPowerManagement.kext
 
* Lnx2mac RTL81xx kext
 
* Lnx2mac RTL81xx kext
* NvEnabler 64.kext
+
* NvEnabler 64.kext with added graphics card id into info.plist
* IOPCIFamily.kext 2.6 from 10.6.7 for recognize 4 GB ram
+
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|Asus P5KPL-AM
 +
|Intel® G31 Intel ICH7
 +
|System configuration:
 +
* Intel Q6600
 +
* Chipset Intel G31
 +
* Asus ENGT440
 +
* Audio Works OB
 +
* Realtek RTL8102EL (Driver from realtek.com.tw)
  
 +
|Installation method:
 +
- iAtkos L2 selecting:
 +
* Chameleon
 +
* VoodooHDA 2.6.3
 +
* Shutdown/Reboot work
 +
* Graphics Enabler
 +
* Netkas GF100 for Graphics
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|-
 
|-
 +
|Asus Maximus IV Gene-z
 +
|Intel Z68
 +
|System configuration:
 +
* Intel Core I5-2500 (not K)
 +
* Chipset Intel Z68
 +
* EVGA GTS 450 1 GB
 +
* Samsung 830 SSD 128 GB
 +
|Installation method:
 +
- iAtkos L2 selecting:
 +
* Chameleon
 +
*AHCI SATA and Trim
 +
* VoodooHDA 2.7.2
 +
*Hardware Sensors (CPU, MB, NVIDIA)
 +
*GF100 (open GL patch)
 +
*Intel Network Driver
  
  
 +
Boots like magic!  Sleep appears to work!!!  You need to set your sound output in pref before speakers work.
 +
|{{Y}}
 +
|{{Y}}
 
|-
 
|-
 
|P5KPL-AM/SE
 
|P5KPL-AM/SE
Line 491: Line 971:
 
|'''Hardware:'''
 
|'''Hardware:'''
 
* Intel Core 2 Quad Q8400 2.67 GHz @3.40  
 
* Intel Core 2 Quad Q8400 2.67 GHz @3.40  
* 2x2GB DDR2 RAM Kingston 800 Mhz (Dual-Channel Interleaved mode)
 
 
* Seagate Barracuda 500 GB SATA II Cache 32 MB (No AHCI)
 
* Seagate Barracuda 500 GB SATA II Cache 32 MB (No AHCI)
 
* Keyboard: Apple USB Keyboard (Old G3)
 
* Keyboard: Apple USB Keyboard (Old G3)
* Mouse: Generic USB
 
 
* GPU: NVidia GeForce 9800 GT 1 GB GDDR3 256bits
 
* GPU: NVidia GeForce 9800 GT 1 GB GDDR3 256bits
* Monitors : Samsung P2470 1920x1080 LCD + Samsung P2470 1920x1080 LCD (very nice)
+
* Dual Display
* PSW : 500 W DUEX (Generic)
+
 
  
 
'''Install Method:'''
 
'''Install Method:'''
  
1. Bootcd HMBT LION DP4 with nvenabler or without nvenabler (http://www.hmbt.org/forum)
+
1. Bootcd HMBT LION DP4 with nvenabler or without nvenabler ([http://www.hmbt.org/forum])
  
 
2. BaseSystem with Packages on a external Driver or Pendrive  
 
2. BaseSystem with Packages on a external Driver or Pendrive  
Line 514: Line 992:
  
 
7. 9800T Graphics Enabler (Full, Dual Display, Full Acelaration)
 
7. 9800T Graphics Enabler (Full, Dual Display, Full Acelaration)
 
 
|'''Kexts'''
 
|'''Kexts'''
 
* VoodooHDA.kext (0.5.6.2)
 
* VoodooHDA.kext (0.5.6.2)
Line 521: Line 998:
 
* NvEnabler 64.kext
 
* NvEnabler 64.kext
 
* If you need you can use the package developed by me for layout ABNT2 [http://dl.dropbox.com/u/7022385/Layout_Brasileiro.ABNT2.pkg Layout ABNT2]
 
* If you need you can use the package developed by me for layout ABNT2 [http://dl.dropbox.com/u/7022385/Layout_Brasileiro.ABNT2.pkg Layout ABNT2]
 
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
Line 530: Line 1,006:
 
*Intel Core2Duo E6420 CPU 2.13 GHz  
 
*Intel Core2Duo E6420 CPU 2.13 GHz  
 
*XFX GT240 512 mb DDR3  works fully  
 
*XFX GT240 512 mb DDR3  works fully  
*2x2GB 667 MHz Ram
 
  
 
'''Notes'''
 
'''Notes'''
Line 543: Line 1,018:
 
'''Install Method:'''
 
'''Install Method:'''
  
*1.BootCD: [http://www.megaupload.com/?d=CACVJ02Z Burn ISO in Cd]  
+
*1.BootCD: [http://dl.dropbox.com/u/45629625/My%20Custom%20Bootcd.iso BOOTCD.ISO]
 
*2.iAtkos L1 from USB
 
*2.iAtkos L1 from USB
 
*3. Boot with the comand: '''npci=0x2000'''
 
*3. Boot with the comand: '''npci=0x2000'''
Line 552: Line 1,027:
 
*Mac App Store WORKS!!!
 
*Mac App Store WORKS!!!
 
*iCloud WORKS!!!
 
*iCloud WORKS!!!
|
+
|'''Patches'''
'''Patches'''
+
 
*Bootloader: Chimera v.1.5.4
 
*Bootloader: Chimera v.1.5.4
 
*Graphics Enabler
 
*Graphics Enabler
Line 562: Line 1,036:
 
*EVO Reboot
 
*EVO Reboot
  
'
+
 
 
*Sound+Ethernet: from download files
 
*Sound+Ethernet: from download files
  
 
'''Useful Tools'''
 
'''Useful Tools'''
*[http://www.megaupload.com/?d=GP97FDEJ Ethernet+Voodoo.ketx+Kext Utility+Kext Helper+Multibest 403]
+
*[http://dl.dropbox.com/u/45629625/ASUS%20P5KPL-AM%20EPU%20FOR%20LION.zip Ethernet voodoo kext kext utility multibest 403]
 
+
 
+
 
+
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
|-
 
 
 
|-
 
|-
 
|Maximus IV Extreme B3
 
|Maximus IV Extreme B3
Line 579: Line 1,048:
 
|'''System Configuration:'''
 
|'''System Configuration:'''
 
* Intel i7-2600K CPU  
 
* Intel i7-2600K CPU  
* 8GB DDR3 RAM 1333Mhz G.Skill Ripjaws X
 
* 1 SDD Crucial SATA III
 
* 2 HDD Western Digital Black (AHCI)
 
* Optical drive: 1 SATA DVD-RW
 
 
* Keyboard: Logitech K800 WirelessUSB (Not fully supported)
 
* Keyboard: Logitech K800 WirelessUSB (Not fully supported)
 
* Mouse: Logitech MX Performance (Full supported with Logitech drivers)
 
* Mouse: Logitech MX Performance (Full supported with Logitech drivers)
Line 594: Line 1,059:
 
* Audio: Works using Mutibeast and DSDT.aml
 
* Audio: Works using Mutibeast and DSDT.aml
 
* Restart/Shutdow: Works without issue
 
* Restart/Shutdow: Works without issue
 +
  
 
'''Install Method:'''
 
'''Install Method:'''
  
 
1. Used VMWare with a preinstalled image. Mounted my hard drive into VMWare and installed to physical drive.
 
1. Used VMWare with a preinstalled image. Mounted my hard drive into VMWare and installed to physical drive.
 
 
|'''Kexts'''
 
|'''Kexts'''
 
* ALC8xxHDA.kext
 
* ALC8xxHDA.kext
Line 605: Line 1,070:
 
* AppleIntelCPUPowerManagement.kext (Patched with SpeedStepper)
 
* AppleIntelCPUPowerManagement.kext (Patched with SpeedStepper)
 
* Intel E1000 NIC KEXT
 
* Intel E1000 NIC KEXT
 
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
|-
 
 
 
|-
 
|-
 
|[http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z68_DELUXE/ P8Z68 Deluxe]
 
|[http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z68_DELUXE/ P8Z68 Deluxe]
Line 615: Line 1,077:
 
|'''System Configuration:'''
 
|'''System Configuration:'''
 
* Intel i7-2600K CPU  
 
* Intel i7-2600K CPU  
* 8GB DDR3 RAM 1800Mhz
 
* 1 HDD Hitachi 1.5TB SATA(VI)
 
 
* Keyboard: chicony ps2 and Delux USB (both fully supported)
 
* Keyboard: chicony ps2 and Delux USB (both fully supported)
 
* Mouse: Logitech MX 1000 (Full supported with Logitech drivers)
 
* Mouse: Logitech MX 1000 (Full supported with Logitech drivers)
Line 630: Line 1,090:
 
* Restart/Shutdow: Works without issue
 
* Restart/Shutdow: Works without issue
 
* Sleep: Works
 
* Sleep: Works
 +
  
 
'''Install Method:'''
 
'''Install Method:'''
Line 636: Line 1,097:
 
Bootloader latest Chameleon with GraphicsEnabler=Yes and npci=0x2000. (on external thumb drive couse of the efi boot)
 
Bootloader latest Chameleon with GraphicsEnabler=Yes and npci=0x2000. (on external thumb drive couse of the efi boot)
 
Sorry for my BAD english
 
Sorry for my BAD english
 
 
|'''Kexts'''
 
|'''Kexts'''
 
* Fakesmc.kext
 
* Fakesmc.kext
Line 648: Line 1,108:
 
|{{Y}}
 
|{{Y}}
 
|-
 
|-
 +
|Asus P8Z68 Deluxe/gen3
 +
|Intel (R) Z68
 +
|'''System Configuration:'''
 +
* Intel i7-2700K CPU
 +
* Keyboard: Comfort Curve Keyboard 2000 v1.0
 +
* Mouse: Logitech Optical Mouse
 +
* Video Card: MSI N250GTS TwinFrozr 1G
 +
* BIOS Version: 3202
  
 +
'''Component Status:'''
 +
* Network: Intel & RealTec Works, with kexts for Multibeast
 +
* USB: OOB, but haven't tested Usb 3.0
 +
* SATA: 3.0 and 6.0 Works, But haven't tested eSata
 +
* Audio: I use external M-Audio Card Fast Track Pro Works, but have heard with Multibeast kexts, onboard works as well
 +
* Restart/Shutdow: Works
 +
* Sleep: Works
 +
* Bluetooth: Stilling working on it
 +
 +
 +
'''Install Method:'''
 +
 +
iAtkos L2 DVD
 +
|'''Kexts'''
 +
* Fakesmc.kext
 +
* AppleIntelCPUPowerManagement.kext (Patched with SpeedStepper)
 +
* AppleIntelE1000e.kext
 +
* JMicron36xeSATA.kext (eSATA)
 +
* Smbios: MacPro 3.1
 +
* Speedstep Works
 +
|{{Y}}
 +
|{{Y}}
 
|-
 
|-
 
|P7H55D - M EVO
 
|P7H55D - M EVO
Line 655: Line 1,145:
 
* CPU: Intel Core i3
 
* CPU: Intel Core i3
 
* GPU: Nvidia 9500GT 1GB(Out of Box)
 
* GPU: Nvidia 9500GT 1GB(Out of Box)
* RAM: 2x2GB DDR3 Corsair 1600Mhz
 
* HDD: Seagate SATA (AHCI mode)
 
* Keyboard: USB
 
* Mouse: Magic Mouse
 
 
*Dual Monitors using VGA and DVI from Single Video Card
 
*Dual Monitors using VGA and DVI from Single Video Card
 
'''Component Status:'''
 
'''Component Status:'''
* All works
+
 
 +
All works
 
After using Mac App Store 10.7.1 I was able to use the 10.7.2 ComboUpdate. I've had no issues and I did not need to reapply any patches.
 
After using Mac App Store 10.7.1 I was able to use the 10.7.2 ComboUpdate. I've had no issues and I did not need to reapply any patches.
 
|Patches
 
|Patches
Line 668: Line 1,155:
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
|-
 
 
 
|-
 
|-
 
|Maximus IV Extreme B3
 
|Maximus IV Extreme B3
Line 675: Line 1,160:
 
|'''System Configuration:'''
 
|'''System Configuration:'''
 
* Intel i7-2600K CPU  
 
* Intel i7-2600K CPU  
* 16GB DDR3 RAM G.Skill Ripjaws X
 
* 2 SDD Onyx SATA III
 
* 2 HDD Western Digital Black (AHCI)
 
* 1 HDD Western Digital Green (AHCI)
 
* Optical drive: 1 SATA Blu-Ray
 
 
* Keyboard: Razer Anasi (not fully working)
 
* Keyboard: Razer Anasi (not fully working)
 
* Mouse: Razer Naga (full support with drivers)
 
* Mouse: Razer Naga (full support with drivers)
Line 690: Line 1,170:
 
* Audio: Works using Mutibeast
 
* Audio: Works using Mutibeast
 
* Restart/Shutdow: Works without issue
 
* Restart/Shutdow: Works without issue
 +
 
'''Install Method:'''
 
'''Install Method:'''
 
1. Used Lion 10.7 GM USB Hack (google it)
 
1. Used Lion 10.7 GM USB Hack (google it)
Line 701: Line 1,182:
 
|Pathces
 
|Pathces
 
* Fakesmc.kext (from web)
 
* Fakesmc.kext (from web)
* Multibeast for AppleIntelCPUPowerManagement.kext, Audio Voodoo 2.7.3, network
+
* AppleIntelCPUPowerManagement.kext, Audio Voodoo 2.7.3, network
 
* Extra lion
 
* Extra lion
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
|-
 
 
 
 
|-
 
|-
 
|P5KС
 
|P5KС
Line 713: Line 1,191:
 
|'''Hardware:'''
 
|'''Hardware:'''
 
* Intel Core 2Duo E8200 2.66 GHz  
 
* Intel Core 2Duo E8200 2.66 GHz  
* 2x2GB DDR2 RAM Kingston 800 Mhz (Dual-Channel Interleaved mode)
 
* WD Cavier Blue 300 GB SATA (AHCI)
 
* Keyboard: USB
 
* Mouse: USB
 
 
* GPU: ZOTAC 320 mb 8800GTS
 
* GPU: ZOTAC 320 mb 8800GTS
* Monitors : Samsung 275T
 
 
* BIOS : Modified 1203 BIOS with AHCI support
 
* BIOS : Modified 1203 BIOS with AHCI support
* PSW : 450 W
+
 
 
'''Notes'''
 
'''Notes'''
 
* Update BIOS with this: [http://www.mediafire.com/download.php?mydxmc3gw4rurgj]
 
* Update BIOS with this: [http://www.mediafire.com/download.php?mydxmc3gw4rurgj]
Line 735: Line 1,208:
 
|'''Hardware:'''
 
|'''Hardware:'''
 
* Intel I7 2600k  
 
* Intel I7 2600k  
* 4x2GB DDR3 RAM corsair vengance 1600 Mhz (Dual-Channel Interleaved mode)
 
* Maxtor 320gb 7200 rpm
 
* Keyboard: USB
 
* Mouse: USB
 
 
* GPU: Nvidia GTX 570
 
* GPU: Nvidia GTX 570
 
* Monitors : BenQ
 
* Monitors : BenQ
 
* BIOS : 2001
 
* BIOS : 2001
* PSW : 750 W Corsair
 
  
 
'''Notes'''
 
'''Notes'''
For more kexts I found some when unpacked the "P8P67 Pro Install Package" (the motherboards are basically the same, google the file name). Be careful installing this over iAtkos though, a boot loader failure may happen. Like I said, instead just unpack the installer and install the kexts needed (some for ATI-graphics for example).
+
For more kexts I found some when unpacked the P8P67 Pro Install Package (the motherboards are basically the same, google the file name).  
 +
Be careful installing this over iAtkos though, a boot loader failure may happen.  
 +
Like I said, instead just unpack the installer and install the kexts needed (some for ATI-graphics for example).
  
 
Files needed found [http://mediafire.com/?c1n1aft8z7knanp here]
 
Files needed found [http://mediafire.com/?c1n1aft8z7knanp here]
 
 
|'''Kexts'''
 
|'''Kexts'''
 
Installed with iAtkos L2
 
Installed with iAtkos L2
Line 762: Line 1,231:
  
 
- Graphics: Nvdia GTX 570
 
- Graphics: Nvdia GTX 570
Installed ATY_Init first with Kext Wizard, then ran GTX Enabler from netkas. Only choose option 1 (I have "heard" that it is better to install ATY_Init seperately)  Also installed the Cuda driver after that.  
+
Installed ATY_Init first with Kext Wizard, then ran GTX Enabler from netkas. Only choose option 1 (I have heard that it is better to install ATY_Init seperately)   
 +
Also installed the Cuda driver after that.  
  
 
You may have to repair permissions and rebuild cache if your system fails to boot up again after this. Do this with Kext Wizard.
 
You may have to repair permissions and rebuild cache if your system fails to boot up again after this. Do this with Kext Wizard.
|?
+
|{{Y}}
|?
+
|{{Y}}
 
|-
 
|-
 
|Striker II NSE  
 
|Striker II NSE  
Line 777: Line 1,247:
 
Files in Extra
 
Files in Extra
 
* Com.apple.boot.plist
 
* Com.apple.boot.plist
* DSDT.aml upper case for chameleon to read it needs to be modified so you do not lose your bios settings. (http://netkas.org/?p=114) I used dsdtse to extract, DO NOT USE THE INSTALL DSDT OPTION YOU WILL WRECK YOUR OS!
+
* DSDT.aml upper case for chameleon to read it needs to be modified so you do not lose your bios settings. [http://netkas.org/?p=114] I used dsdtse to extract, DO NOT USE THE INSTALL DSDT OPTION YOU WILL WRECK YOUR OS!
 
* smbios.plist
 
* smbios.plist
  
Line 787: Line 1,257:
  
 
My org.chamelon.Boot.plist
 
My org.chamelon.Boot.plist
*      &lt;key&gt;EthernetBuiltIn&lt;/key&gt;
+
*      <key>EthernetBuiltIn</key>
* &lt;string&gt;Yes&lt;/string&gt;
+
* <string>Yes</string>
* &lt;key&gt;GraphicsEnabler&lt;/key&gt;
+
* <key>GraphicsEnabler</key>
* &lt;string&gt;Yes&lt;/string&gt;
+
* <string>Yes</string>
* &lt;key&gt;Kernel&lt;/key&gt;
+
* <key>Kernel</key>
* &lt;string&gt;mach_kernel&lt;/string&gt;
+
* <string>mach_kernel</string>
* &lt;key&gt;Kernel Flags&lt;/key&gt;
+
* <key>Kernel Flags</key>
* &lt;string&gt;arch=i386 maxmem=3456 npci=0x2000 darkwake=0&lt;/string&gt;
+
* <string>arch=i386 maxmem=3456 npci=0x2000 darkwake=0</string>
* &lt;key&gt;Legacy Logo&lt;/key&gt;
+
* <key>Legacy Logo</key>
* &lt;string&gt;Yes&lt;/string&gt;
+
* <string>Yes</string>
* &lt;key&gt;Timeout&lt;/key&gt;
+
* <key>Timeout</key>
* &lt;string&gt;2&lt;/string&gt;
+
* <string>2</string>
 
|
 
|
 
* Bios revision 0901 you can save your bios setting under tools in your bios :) 32 bit Q6600 CPU @ 2.4 Ghz overclocked in bios to q6800  6gb ram 2 1gig 2 2gig all by ocz  
 
* Bios revision 0901 you can save your bios setting under tools in your bios :) 32 bit Q6600 CPU @ 2.4 Ghz overclocked in bios to q6800  6gb ram 2 1gig 2 2gig all by ocz  
*After installing IPC 10.5.6 or Hazard 10.6.6i follow youtube video [http://www.youtube.com/watch?v=MdaUU0pNLBQ&amp;amp;amp;amp;amp;feature=related] after snow leopard 10432 which is 10.6.0 is installed use the combo update by apple 10.6.8v1.1 Do not use software update causes issues  
+
*[http://www.youtube.com/watch?v=MdaUU0pNLBQ Video] after snow leopard 10432 which is 10.6.0 is installed use the combo update by apple 10.6.8v1.1  
 +
Do not use software update causes issues  
 
* Sound=Voodoohda.kext works no digital audio yet..airfoil is what I used to get audio to stream to airport express for the time being. Also if using vlc delay audio to -2050. Want to turn your hack into a airplay speaker? [http://asktherelic.com/2011/04/11/air-speakers-for-everyone/] autostart? [https://github.com/albertz/shairport/blob/master/INSTALL.md] edit org.mafipulation.shairport.plist to change the airplay name before you load into launchctl  
 
* Sound=Voodoohda.kext works no digital audio yet..airfoil is what I used to get audio to stream to airport express for the time being. Also if using vlc delay audio to -2050. Want to turn your hack into a airplay speaker? [http://asktherelic.com/2011/04/11/air-speakers-for-everyone/] autostart? [https://github.com/albertz/shairport/blob/master/INSTALL.md] edit org.mafipulation.shairport.plist to change the airplay name before you load into launchctl  
 
* Video=Nvidia Gtx280 works hdmi full 1080p no audio via hdmi yet
 
* Video=Nvidia Gtx280 works hdmi full 1080p no audio via hdmi yet
Line 808: Line 1,279:
 
* Sata works
 
* Sata works
 
* Usb works
 
* Usb works
* Esata rocketraid 2302 port1 running a Raid10 enclosure w (4) 1TB 7200 rpm drives, port 2 using a Single HD dock with (1) 500GB 7200rpm both drives work simultaneously Enable plug and play OS in bios use maxmem=3072 as a boot flag if using 4gb of ram or more still useable if you want e-sata support. AppleNforceATA.slash.kext needs to be updated for raid support see this link [http://code.google.com/p/darwin-ata/issues/detail?id=2]
+
* Esata rocketraid 2302 port1 running a Raid10 enclosure w (4) 1TB 7200 rpm drives, port 2 using a Single HD dock with (1) 500GB 7200rpm both drives work simultaneously Enable plug and play OS in bios use maxmem=3072 as a boot flag if using 4gb of ram or more still useable if you want e-sata support.  
 +
AppleNforceATA.slash.kext needs to be updated for raid support see this link [http://code.google.com/p/darwin-ata/issues/detail?id=2]
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
Line 819: Line 1,291:
 
* Lan Marvell Youkon 88E8056 PCI-E Gigabit Ethernet Controller
 
* Lan Marvell Youkon 88E8056 PCI-E Gigabit Ethernet Controller
 
* Audio ALC 883
 
* Audio ALC 883
* 2048 MB Ram DDR2 Kingston
+
|
* 2 Hard Drives: WD1600AAJS-22WAA0 ATA Device (160GB)
+
* Western Digital WD5000AAKS-55V0A0 ATA Device (500GB)
+
* DVD-Rom Drive ASUS DRW-2014S1
+
 
+
 
Install Method:
 
Install Method:
  
 
* iAtkos L2 DVD Downloaded from here: [http://www.kat.ph/iatkos-l2-mac-os-x-lion-10-7-2-t5989819.html]
 
* iAtkos L2 DVD Downloaded from here: [http://www.kat.ph/iatkos-l2-mac-os-x-lion-10-7-2-t5989819.html]
* Install on Guid Partition Table, MBR Not Working!!!
+
* Install on Guid Partition Table, MBR Not Worked.
 
* Customize Part: Chameleon 2.1,Graphic Enabler,Non AHCI SATA,JMicron JMB36X IDE,Voodoo HDA 2.2
 
* Customize Part: Chameleon 2.1,Graphic Enabler,Non AHCI SATA,JMicron JMB36X IDE,Voodoo HDA 2.2
 
* Network: Marvell Youkon 88E8056 kext.
 
* Network: Marvell Youkon 88E8056 kext.
|
+
|{{Y}}
| {{Y}}
+
|{{Y}}
| {{Y}}
+
 
+
 
|-
 
|-
 
|P5L-MX
 
|P5L-MX
Line 843: Line 1,309:
 
* LAN Attansic L1
 
* LAN Attansic L1
 
* Audio Realtek ALC883  
 
* Audio Realtek ALC883  
* 2 x 1GB Corsair 666MHz DDR2 RAM (part # VS1GB667D2)
 
* 1xHD sata (MBR, 4 partitions, Triple boot (GRUB) : Debian, OSX, Win XP)
 
* 1xDVD RW ide
 
 
 
|Installation method:
 
|Installation method:
 
* Update from a fubar Snow Leopard 10.6.8
 
* Update from a fubar Snow Leopard 10.6.8
Line 861: Line 1,323:
 
* Audio kind of working with VoodooHDA.kext (only speakers)
 
* Audio kind of working with VoodooHDA.kext (only speakers)
 
* Sleep not working.
 
* Sleep not working.
| {{Y}}
+
|{{Y}}
| {{Y}}
+
|{{Y}}
 
|-
 
|-
 
|P5Q Deluxe
 
|P5Q Deluxe
Line 871: Line 1,333:
 
* Asus Nvidia GTS 250 512Mb  
 
* Asus Nvidia GTS 250 512Mb  
 
* SoundBlaster Audigy 2
 
* SoundBlaster Audigy 2
 
 
|Installation method:
 
|Installation method:
 
* Note: I Used MultiBeast 4.1.0 for the following operations.
 
* Note: I Used MultiBeast 4.1.0 for the following operations.
 
* Fix Ps2 Keyboard Issue:
 
* Fix Ps2 Keyboard Issue:
:- From MultiBeast: in "Drivers..."/"Kexts..."/"Miscellanous", check "PS/2 Keyboard/Mouse..."
+
:- From MultiBeast: in Drivers.../Kexts.../Miscellanous, check PS/2 Keyboard/Mouse...
 
:- Open Terminal from install drive (or flash drive install disk)
 
:- Open Terminal from install drive (or flash drive install disk)
 
:- Enter: vi Volumes/OSX/System/Library/CoreServices/Setup\ Assistant.app/Contents/Info.plist
 
:- Enter: vi Volumes/OSX/System/Library/CoreServices/Setup\ Assistant.app/Contents/Info.plist
 
:- Delete these lines:
 
:- Delete these lines:
::<string>DeviceSection</string>  
+
:<string>DeviceSection</string>  
::<string>KeyboardTypeSection</string>
+
:<string>KeyboardTypeSection</string>
 +
 
  
 
* Sound Blaster Audigy 2
 
* Sound Blaster Audigy 2
Line 889: Line 1,351:
  
 
* Ethernet (Marvell Yukon 88E8056 PCI-E Gibgabit Ethernet)
 
* Ethernet (Marvell Yukon 88E8056 PCI-E Gibgabit Ethernet)
:- Install IONetworkingFamily.kext (Drag & Drop over kext utility)
+
:- Install IONetworkingFamily.kext (Drag &amp;amp; Drop over kext utility)
 
:- Go in System Preferences/Network; then click ok on warning; then click Apply
 
:- Go in System Preferences/Network; then click ok on warning; then click Apply
  
 
* VideoCard:
 
* VideoCard:
:- Open "MultiBeast" in "Customization"/"Boot Options", check: "32-bit Apple Boot Screen" and "PCI Root ID Fix"
+
:- Open MultiBeast in Customization/Boot Options, check: 32-bit Apple Boot Screen and PCI Root ID Fix
:- Find and open "com.apple.boot.plist", then add/replace the following lines:
+
:- Find and open com.apple.boot.plist, then add/replace the following lines:
::<key>Graphics Mode</key>
+
:<key>Graphics Mode</key>
::<string>1920x1200x32</string>
+
:<string>1920x1200x32</string>
::<key>GraphicsEnabler</key>
+
:<key>GraphicsEnabler</key>
::<string>Yes</string>
+
:<string>Yes</string>
::<key>Kernel</key>
+
:<key>Kernel</key>
::<string>mach_kernel</string>
+
:<string>mach_kernel</string>
::<key>Kernel Flags</key>
+
:<key>Kernel Flags</key>
::<string>-v</string>
+
:<string>-v</string>
  
 
* Bootloader
 
* Bootloader
:- Install Chimera 1.6.0 (not the one from MultiBeast)
+
:- Install Chimera 1.6.0  
|?
+
|{{Y}}
| {{Y}}
+
|{{Y}}
 
|-  
 
|-  
 +
|Maximus IV Extreme B3
 +
|Intel (R) P67
 +
|'''System Configuration:'''
 +
* Intel i7-2600K CPU
 +
* Keyboard: Lenovo Thinkpad USB travel keyboard with trackpad and mouse stick & Apple wireless Bluetooth keyboard
 +
* Mouse: Logitech G9 game mouse
 +
* GPU: ATI HD6870
 +
* BIOS Version: 2105
 +
 +
'''Component Status:'''
 +
* Network: works without issue with Unibeast, but check hnak's AppleIntelE1000e Ethernet driver in Multibeast, else it will be de-installed
 +
* USB2: works without issue
 +
* USB3: works without issue with Multibeast (step 5)
 +
* Bluetooth: works without issue
 +
* SATA 3GB & 6GB (Intel-ports): works without issue
 +
* Audio: works without issue with Multibeast (step 5)
 +
* Restart/Shutdow: Works without any issue
 +
|
 +
'''Install Method:'''
 +
[http://www.youtube.com/watch?v=1RyMD7cYwTQ Video]
 +
 +
1. Format USB key (min. 8GB) with disk utility (use the option Master Boot Record)
 +
 +
2. Put you OSX Lion image in your OSX app folder
 +
 +
3. Run Unibeast (download from [http://www.tonymacx86.com/C:Dq-OCPpT/UniBeast-1.0.0.zip]) and install it on the USB key
 +
 +
4. Boot from USB and choose install OSX on your disk (format with disk utility the boot disk as Mac OSX extended journaled with option GUID partition table)
 +
 +
5. Run Multibeast (download from [http://www.tonymacx86.com/C:Dq-OCPpT/MultiBeast-4.2.1.zip]) with the following items checked:
 +
 +
- easybeast install
 +
 +
- system utilities => repair permissions
 +
 +
- audio: - Realtek ACL8xxHDA - AppleHDA Rollback - Non-DSDT HDAEnabler - ALC889
 +
 +
- disk: - 3rdParty SATA - 3rdParty eSATA - Trim Enabler
 +
 +
- Miscellaneous: - FakeSMC - FakeSMC Plugins - Mohterboard plugins - AMD Radeon Plugin - USB 3.0 - NEC/Renesas and Etron
 +
 +
- Network: - hnak's AppleIntelE1000E Ethernet
 +
 +
- Bootloaders: - Chimera v1.7.0 r1394
 +
 +
- iMac 12,2
 +
 +
- OSx86 Software: - Kext Utility - ShowAllfiles
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|P8H61-M LX3 PLUS R2.0
 +
|Intel® H61(B3)
 +
|System configuration:
 +
* CPU: Intel® Pentium® Processor G860 (3.00GHz, 3M Cache)
 +
* GPU: AMD Radeon™ HD 6670 (1GB DDR3)
 +
* RAM: Transcend DDR3 1333MHz 4 GB
 +
* LAN: Realtek® 8111F
 +
* BIOS version: 0802
 +
|'''Installation method:'''
 +
Using iAtkos L2 from a flash drive:<br />
 +
1. Formatted the flash drive (8 GB) to Mac OS X Extended (Journaled) [used Master Boot Record]<br />
 +
2. Dragged the iAtkos L2 DMG to Disk Utility, mounted it and restored it to the newly created partition of the flash drive.<br />
 +
3. Ran the [http://www.insanelymac.com/forum/topic/231075-chameleon-22svn-official-pkg-installer-binaries/ Chameleon installer] and installed it to the flash drive.<br />
 +
4. Set HDD as AHCI instead of IDE in Advanced Setup in the BIOS (UEFI) and enabled VT-x as well<br />
 +
5. Switched the GPU from PCIe to iGPU (due to the GPU being a Radeon HD 6xxx series)<br />
 +
6. Booted from the flash drive with the '''-f''' argument to make it start.<br />
 +
7. Formatted a partition as Mac OS X Extended (Journaled) in Disk Utility and selected the following customizations:<br />
 +
- Bootloader: Chameleon 2.1<br />
 +
- Bootloader options: Graphics Enabler, Built-in Ethernet<br />
 +
- Patches: FakeSMC, Disabler, RTC, EvoReboot, IOPCIFamily (optional)<br />
 +
- Drivers: <br />
 +
SATA/IDE:              AHCI SATA, Non-AHCI SATA; <br />
 +
Sound:                  VoodooHDA 2.2 (will be updated later)<br />
 +
USB:                      USB<br />
 +
Hardware Sensors:    CPU, Motherboard, ATI VGA Cards<br />
 +
Network:                Realtek RTL8111/8168B<br />
 +
8. Upon reboot, I accessed the Advanced Setup in BIOS and switched the GPU to PCIe.<br />
 +
9. Started the system without flags (although, you may try -v if it doesn't work the first time)<br />
 +
10. After set-up system everything* fully working.<br />
 +
 +
 +
-Sleep almost working (you just need to press the power on key to wake it up)
 +
You also need to [http://www.osx86.net/view/2746-voodoohda_2.7.4_pkg_installer.html get and run the latest VoodooHDA installer] and reboot with the -f flag once.
 +
Then reboot normally to confirm it working.
 +
'''Note:''' Go to System Preferences, Sound, Output and switch it to Line-Out (Green Rear) to hear sounds if you're not using digital-out.
 +
 +
Can be updated to 10.7.5 if you run the updater and when it's about to ask you to reboot,<br />
 +
don't do it, but run the [http://www.souldevteam.net/blog/downloads/ 10.7.5 fixer].<br />
 +
When it's done, then press Reboot and it should work just fine.<br />
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 
|}
 
|}
  
===ECS===
+
===Biostar===
 
{| class=wikitable width=100%
 
{| class=wikitable width=100%
 
!Hardware Name  
 
!Hardware Name  
Line 919: Line 1,474:
 
!colspan=2| 32/64bit working ''with'' patches
 
!colspan=2| 32/64bit working ''with'' patches
 
|-
 
|-
|ECS G31T-M7 Rev 1
+
|TH67+
 +
|H67 - BIOS 4.6.4
 +
|
 +
'''System Configuration:'''
 +
* Intel i5 2400 Sandy Bridge
 +
* XFX Radeon HD 6850
 +
'''Notes:'''
 +
* Initial install with iAtkos 10.7.2 (L2).
 +
* MultiBeast settings: EasyBeast, kext for Realtek gigabit ethernet.
 +
* USB3.0 did not work, Creative X-Fi did not work, could not boot in RAID mode.
 +
* Had to disable ECHI hand-off support in BIOS and switch to AHCI.
 +
* Would only support DVI display on boot, HDMI outputs worked fine.
 +
 
 +
'''Components Status:'''
 +
* Did not test comprehensively. Did not test sleep, on-board video or SATA3. It ''could'' successfully run iMovie '11 and Quark Express!
 +
|
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
 
 +
|-
 +
|G31M+
 
|Intel G31/ICH7
 
|Intel G31/ICH7
 
|
 
|
 
'''System Configuration:'''
 
'''System Configuration:'''
 +
* Intel Pentium Dual Core E5800 @ 3.2GHz
 +
* EVGA GeForce 9500GT 1024MB DDR2
 +
* Display ViewSonic VA1930wm
 +
* 4GB RAM DDR2 800Mhz
 +
'''Install notes:'''
 +
* Niresh12495 Lion 10.7.2 DVD
 +
* Audio: voodoo 2.72
 +
* USB: Patch with USB Fix
 +
* Bootloader: Chameleon v2.1 (Do Not select Chimera)
 +
* Video: GraphicsEnabler=yes
 +
* Boot of DVD - Select patches listed above
 +
* Reboot
 +
* Register
 +
* Download Realtek RTL 8102/8103E-L URL - http://www.osx86.net/downloads.php?do=file&id=2185&act=down&actionhash=guest
 +
* restart with -v -f
 +
 +
'''Components Status:'''
 +
* USB works with patch
 +
* Audio works including front panel and "headphone mute"
 +
* QE/CI and Dual Monitor works with GraphicsEnabler
 +
* Sleep works
 +
* Ethernet works with patch
 +
 +
|
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
 +
|}
 +
 +
===ECS===
 +
{| class=wikitable width=100%
 +
!Hardware Name
 +
!Chipset
 +
!Notes
 +
!Patches Used
 +
!colspan=2| 32/64bit working ''with'' patches
 +
|-
 +
|G31T-M7 Rev 1
 +
|
 +
|
 
*BIOS version: rev 1
 
*BIOS version: rev 1
 
*Intel Core 2 Duo E4500 2.2GHz
 
*Intel Core 2 Duo E4500 2.2GHz
 
*NVIDIA 6600 256MB DDR2
 
*NVIDIA 6600 256MB DDR2
*3GB RAM DDR2 667Mhz
 
'''Notes:'''
 
*Install method - Lion.dmg iAtkos L2 10.7.2
 
*Bootloader: Chameleon latest with bootloader option standard logo apple
 
 
'''Components Status:'''
 
 
*Audio - Works  
 
*Audio - Works  
 
*Video - Works
 
*Video - Works
Line 940: Line 1,551:
 
*Mac App Store - Works
 
*Mac App Store - Works
 
*iCloud - no test
 
*iCloud - no test
|
+
|'''Patches:
 
+
'''Personal note:'''
+
*Perfect hackintosh ''.
+
'''Patches:
+
 
*Audio - select all voodoHDA
 
*Audio - select all voodoHDA
 
*ethernet - install realtek pkg for chipset 8139c
 
*ethernet - install realtek pkg for chipset 8139c
 
|{{Y}}
 
 
|{{Y}}
 
|{{Y}}
 +
|{{N}}
 
|-
 
|-
 +
|GF7050VT-M
 +
|Nforce 610i/Geforce 7050
 +
|
 +
*Intel Pentium E5200 2.5GHZ OC 3.1GHZ
 +
*ATI Shappire Radeon HD 5570 1GB DDR3
 +
*Use SATA DVD-RW - IDE DVD-RW won't work (you will get "still waiting for root device" while booting the installer)
 +
'''Components Status:'''
 +
*Mouse - Only works USB Mouse - PS/2 doesn't work (by the moment)
 +
*Keyboard - Works USB and PS/2
 +
*Audio - Works VoodooHDA.kext (ver. 0.2.7.3)
 +
*Video - Works (disabled graphics enabler - selected Atixxx_init)
 +
*Ethernet - seems to work ( Realtek RTL8201CL ) built in
 +
*Wireless - Works (D-Link DWA-110 - RT73 chip) - (RT73 Kext + Ralink Wireless Utility: [http://www.osx86.net/downloads.php?do=file&id=1443])
 +
*Sleep/Wakeup - ?
 +
*Shutdown/restart - Works
 +
*Mac App Store - Works
 +
*iCloud - no test
 +
|
 +
|{{Y}}
 +
|{{N}}
  
 +
|-
 +
|G41T-M12 (V1.0)
 +
|ICH7 chipsets
 +
|
 +
*Intel Pentium E6300 3.0 GHZ
 +
*NVidia GForce 9600 GSO 512 MB
 +
*Use SATA DVD-RW
 +
'''Components Status:'''
 +
*Mouse - Only works USB Mouse - PS/2 doesn't work (by the moment)
 +
*Keyboard - Works USB and PS/2
 +
*Audio - Works VoodooHDA.kext (ver. 0.2.7.3)
 +
*Video - Works (nvenabler )
 +
*Ethernet - work
 +
*Wireless - no test
 +
*Sleep/Wakeup - ?
 +
*Shutdown/restart - Works
 +
*Mac App Store - Works
 +
*iCloud - Works
 +
|
 +
|{{Y}}
 +
|{{N}}
 +
|-
 
|}
 
|}
 +
 
===EVGA===
 
===EVGA===
 
{| class=wikitable width=100%
 
{| class=wikitable width=100%
Line 976: Line 1,625:
 
'''Components Status:'''
 
'''Components Status:'''
 
*Audio - Works  
 
*Audio - Works  
*Video - Works HDMI Works "no audio from hdmi"
+
*Video - Works HDMI Works no audio from hdmi
 
*Ethernet - Works
 
*Ethernet - Works
 
*Sleep/Wakeup - does not work and altered bios (does not work in windows 7 either)
 
*Sleep/Wakeup - does not work and altered bios (does not work in windows 7 either)
Line 983: Line 1,632:
 
*iCloud - no test
 
*iCloud - no test
 
|
 
|
 +
|{{Y}}
 +
|{{Y}}
 +
|-
  
'''Personal note:'''
+
|-
*Good hackintosh ''.  
+
|EVGA X58 E758 3-way SLI
'''Patches:
+
|Intel x58/ICH10
Just for Video.
+
|
 +
'''System Configuration:'''
 +
*Intel Core i7 920 D0 @ 4.0GHz
 +
*PNY XLR8 GTX560 Ti OC 1024MB DDR3
 +
*6GB RAM DDR3 1600Mhz
 +
'''Install notes:'''
 +
*Install method - iAtkos L2 10.7.2
 +
Keep defaults for everything plus:
 +
*Bootloader options: PCI Root-1
 +
*Patches: IOPCIFamily
 +
*Drivers: AHCI SATA Intel, Jmicron IDE, Realtek RTL8111/8168, NVIDIA GF100
 +
*Additional bootflags: -cpus=1 -npci=0x2000
 +
'''Post-install:'''
 +
*Drivers: Video with GTX 5xx driver from kexts.com, Audio with Multibeast 4.2.1 (ALC8xx Enabler, AppleHDA Rollback, ALC889), USB WiFi with Realtek 8188SU driver from their website.
  
|{{Y}}
+
'''Components Status:'''
 +
*Audio - Works
 +
*Video - Works HDMI Works no audio from hdmi
 +
*Ethernet - Works
 +
*USB Wifi -- Works using Realtek's 8188SU OS X 10.7.x driver
 +
*Sleep/Wakeup - Works
 +
*Shutdown/restart - Works
 +
*Mac App Store - Works
 +
*iCloud - no test
 +
|IOPCIFamily plus the aforementioned post-install drivers.
 +
|?
 
|{{Y}}
 
|{{Y}}
 
|-
 
|-
Line 1,025: Line 1,700:
 
*iCloud - Works
 
*iCloud - Works
 
|
 
|
 
'''Personal note:'''
 
*Perfect hackintosh - I've had no issues and I did not need to reapply any of previously applied patches''.
 
'''Patches:
 
 
*CMOS reset patch
 
*CMOS reset patch
 
*Audio - patched AppleHDA
 
*Audio - patched AppleHDA
 
*Video - using DSDT patch
 
*Video - using DSDT patch
*[http://www.osx86.net/view/1097-foxconn_p35a_installation_tool_pack.html Foxconn P35A tools pack - all-in-one post-installation tool pack designed specifically for this motherboard ]
+
*[http://www.osx86.net/view/1097-foxconn_p35a_installation_tool_pack.html] Foxconn P35A tools pack - all-in-one post-installation tool pack designed specifically for this motherboard
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
Line 1,052: Line 1,723:
 
:* Lnx2Mac
 
:* Lnx2Mac
 
:* Kextbeast
 
:* Kextbeast
*Audio: [http://www.osx86.net/downloads.php?do=file&amp;amp;amp;amp;amp;id=1505 Realtek ALC888]
+
*Audio: [http://www.osx86.net/downloads.php?do=file&id=1505 Realtek ALC888]
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|P35A-S
 +
|Intel P35/ICH9R
 +
|
 +
*10.7.2 Combo Update
 +
*CPU: Intel Core 2 Quad Q6600 @ 2.4GHz
 +
*Graphics: Palit GeForce 8600GT 1GB
 +
*RAM: 4GB DDR2 @ 800MHz
 +
*Audio: Realtek ALC888
 +
*LAN: Realtek RTL8111B
 +
|
 +
*Shutdown/Restart: DSDT
 +
*Graphics: GraphicsEnabler=Yes
 +
*Audio: AppleHDA.kext (Rollback 10.6.2), ALC8xxHDA.kext
 +
*LAN: Realtek RTL81xx.kext
 +
*Mac App Store: EthernetBuiltIn=Yes
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|-
 
|-
  
 +
|G31
 +
|Intel G31/G33 series/ICH7R
 +
|
 +
*iAtkos L2
 +
*CPU: Intel Duel Core E2200 @ 2.2GHz(Ditected as Core 2 Duo)
 +
*Inbuilt (Ditected as 64MB)
 +
*RAM: 2GB DDR2 @ 667MHz
 +
*Audio: Not Working(didn't try)
 +
*LAN: Not working(didn't try)
 +
*HUAWEI E153 Modem working
 +
|
 +
*Shutdown/Restart/sleep/wake:working natively
 +
*Graphics: GraphicsEnabler=No
 +
*ps2 driver,usb driver,Disk drivers:yes
 +
*Cpu Maxval Disabled
 +
*Floppy disabled
 +
*IDE 40GB HDD
 +
*boot with dvd, when unplug the ps2 mouse installer not loaded (first plug ps2 mouse and KB and boot with -v after 15min installer loaded then plug the usb mouse and install 15min install time and everything worked without any trouble).
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 
|}
 
|}
  
Line 1,067: Line 1,777:
 
!colspan=2| 32/64bit working ''with'' patches
 
!colspan=2| 32/64bit working ''with'' patches
 
|-
 
|-
|GA-P31-DS3L
+
|GA-P55-UD3
|Intel P31 ICH7
+
|Intel P55
 
|'''Hardware:'''
 
|'''Hardware:'''
*Intel Dual Core E5500 CPUs
+
*Intel Core i5 750 CPUs
*nVidia pixelview GT 210 graphic cards
+
*nVidia GTX 260
*2 GB DDR2 SDRAM
+
*Hitachi 250Gb Drive
+
 
'''Notes:'''
 
'''Notes:'''
*Works with (Lion retail USB) USE HACKBOOT LION CD [http://www.insanelymac.com/forum/index.php?showtopic=256729]
+
*Install Method: Install App from AppStore and [http://tonymacx86.blogspot.com/2011/10/unibeast-install-mac-os-x-lion-using.html]
 +
*10.7.2 installed after first boot
 +
*MultiBeast installed after combo update
  
 
|'''Kexts'''
 
|'''Kexts'''
*FAKE SMC  3.1.0 in S/L/E [http://www.mediafire.com/?d1ebuuaqcacuamw]
+
'''MultiBeast 4.1.0'''
*NullCPUPowerManagement.kext in S/L/E
+
*EasyBeast install
* NvEnabler 64.kext for VGA GT 210 PixelView 1GB DDR2
+
*Drivers &amp; Bootloaders
*Audio uses alc 888 kexts [http://www.osx86.net/view/2003-alc888.html], work with custom DSDT [https://rapidshare.com/#!download|65tl4|2884325252|P31-DS3L.zip|4|R~0|0|0]
+
**Kext &amp; Enablers
 +
***Disk
 +
****IOAHCIBlockStorageInjector
 +
****JMicron 36x ATA
 +
***Graphics
 +
****NVIDIA GF100 Fermi Patches
 +
*****OpenCL Enabler 10.7.2
 +
***Miscellaneous
 +
**** Nearly everything except USB3 and PS/2. Select PS/2 if needed.
 +
***Network
 +
****Lnx2Mac's RealtekRTL81xx..
 +
**Bootloaders
 +
***Chimera...
 +
*Customization
 +
**Boot Options
 +
***64-bit Apple Boot Screen
 +
***PCI Root ID Fix
 +
***Use KernelCache
 +
 
 +
'''Note:'''
 +
Needed to add ncpi=0x2000 to Kernel Flags (/Extra/org.chameleon.Boot.plist) after installing the ComboUpdate. Don't know if it is also used on 10.7.0 and was set by the UniBeast bootloader by default. The install worked without adding any kernel flag. Audio does not work out of the box and not with ''Drivers &amp; Bootloaders/Kext &amp; Enablers/Audio/Realtek ALC8xx/Non-DSDT HDAEnabler/ALC887-888b''. Since I'm using an usb interface, I did ? the others. Someone might add an info to this entry.  
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 +
 
|-
 
|-
|GA-P31-DS3L  
+
|GA-P55A-UD4
 +
|Intel P55
 +
|'''System Configuration:'''
 +
* BIOS: F15
 +
* CPU: Intel Core i5 760
 +
* GPU: Gigabyte GeForce GTX 460 1Go
 +
* RAM: 2GB x 4 DDR3 G-Skill (F3-12800CL9D-4GBNQ)
 +
* HDD: 128GB SSD Kingston Hyper-X
 +
* Bluetooth: Belkin Bluetooth USB Adapter 100 meter range
 +
* Keyboard: Apple Wireless Keyboard MC184F
 +
* Mouse: Apple Magic Mouse
 +
<br />
 +
'''Notes:'''
 +
*Install only with 2GB x 2 RAM and USB mouse
 +
*Works with this guide : [http://tonymacx86.blogspot.com/2011/10/unibeast-install-mac-os-x-lion-using.html UniBeast: Install Mac OS X Lion Using an All-In-One Bootable USB Drive]
 +
*Combo update 10.7.2 installed after first boot
 +
*MultiBeast installed after combo update
 +
|'''Installation method:'''
 +
'''MultiBeast 4.2.1'''
 +
*User DSDT install [http://www.tonymacx86.com/dsdt.php Tonymacx86 DSDT Database]
 +
*Drivers &amp; Bootloaders
 +
**Kext &amp; Enablers
 +
***Miscellaneous
 +
****USB3.0 - NEC/Renesas and Etron
 +
***Network
 +
****Lnx2Mac's RealtekRTL81xx Ethernet v0.0.90
 +
<br />
 +
After install edit org.chameleon.Boot.plist in Extra folder and delete:
 +
* GraphicsEnabler=Yes
 +
Replace:
 +
* npci=0x2000 and darkwake=0 by PCIRootUID=0
 +
 
 +
|{{Y}}
 +
|{{Y}}
 +
 
 +
|-
 +
|GA-H61M-D2P-B3
 +
|Intel H61
 +
|'''Hardware:'''
 +
* Intel Core i5 2500k
 +
* nVidia GeForce 210 (Works OOB)
 +
* 4GB DDR3 RAM
 +
* 1TB WD HDD SATA II
 +
'''Notes:'''
 +
*Installed Lion 10.7.2 (App Store + USB Method) with Tonymac's guide Unibeast: [http://tonymacx86.blogspot.com/2011/10/unibeast-install-mac-os-x-lion-using.html Tonymacx86Multibeast ]
 +
*Sleep doesn't work. It sleeps but does not wakes up.
 +
*Some problem with firewire while wake up from sleep mode.
 +
|'''Kexts:'''
 +
*All drivers from Multibeast
 +
*DSDT from the [http://tonymacx86.com/dsdt.php Tonymacx86 DSDT Database]
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|GA-H61M-S2V-B3
 +
|Intel H61
 +
|'''Hardware:'''
 +
* Intel Pentium G620
 +
* Intel HD2000(Integrated)
 +
* 2GB DDR3 RAM
 +
* 120GB HDD SATA II
 +
'''Notes:'''
 +
*Installed Lion 10.7.2 via iAtkos L2 Bootdisc
 +
*Chameleon Bootloader,Chimera didn't work for me
 +
*I didn't test sleep but reboot/shutdown works fine.
 +
*NO DSDT OR EASYBEAST(it causes problems)
 +
|'''Kexts:'''
 +
*In installation I checked USB2.0,PS/2,non-ahci sata driver,jmicron ide,no graphics enabler,network kext,no audio + pre-checked
 +
*After installation I deleted graphics kexts ati,intel,nvidia(rm -rf AppleIntelHD*/ATI*/NV*/GeForce*)
 +
*IntelHD2000 worked with HD3000 kext from here [http://www.osx86.net/view/2539-intel_hd_graphics_latest.html] or [http://www.osx86.net/downloads.php?do=cat&id=7]
 +
and also MacMini5.1 Definition,No OpenGL,no lags,1080p resolution(DVI tested)
 +
*In multibeast i installed ONLY audio kext
 +
|{{Y}}
 +
|{{Y}}
 +
 +
|-
 +
|GA-PA65-D3-B3
 +
|Intel H61
 +
|'''Hardware:'''
 +
* Intel Core i7 2600k
 +
* nVidia GeForce 8500GS with dual display. Dual Display is working.
 +
* 4GB DDR3 RAM
 +
* 1.5 TB SEAGATE HDD SATA II two partion HSF+ and exfat. Boot partition is Mac Journaled and Guid partition
 +
'''Notes:'''
 +
*Installed Lion 10.7.2 via Kakewalk Method. Ethernet driver is added Tonymac's Multibeast. Sounds is working. I use coaxıal digital output.
 +
*Sleep doesn't work. It sleeps but does not wakes up.
 +
 
 +
|'''Kexts:'''
 +
*All drivers from Kakewalk and Multibeast. (ethernet driver only)
 +
 
 +
|{{Y}}
 +
|{{Y}}
 +
 
 +
|-
 +
|GA-P31-DS3L
 
|Intel P31 ICH7
 
|Intel P31 ICH7
|
+
|'''Hardware:'''
*CPU Intel 1.6 GHz Dual Core Celeron
+
*Intel Core2Duo
*NVidia GeForce GT 8500 512 MB
+
'''Notes:'''
*2GB Kingston RAM [email protected]
+
* Chameleon RC5 Trunk 1730
*Install Method: Kakewalk (with fresh installation):
+
* Retail install from 10.7.2 USB install. Everything works perfectly: Speedstep, Ethernet, Sleep, Audio, Graphics
*Installed with '''laikexpert''' Guide:[http://www.kakewalk.se/forums/discussion/3263/success-gigabyte-ep43-ud3l-installed-mac-os-x-10.7-lion-updated-to-10.7.2#Item_1]
+
 
*Installed with '''laikexpert''' Guide:[http://www.osx86.net/desktops/12776-guide-gigabyte-ep43-ud3l-installed-mac-os-x-10-7-lion-updated-10-7-2-a.html]
+
|'''Kexts'''
*Updated with 10.7.2 Combo Update
+
* FakeSMC (IntelCPUMonitor, IntelThermal, SuperIOFamily)
|
+
* AppleHDA [http://www.tonymacx86.com/viewtopic.php?f=16&t=29283&p=226213&hilit=ALC888+10.7.2#p226213]
*All works except Sleep Mode
+
* ElliottForceLegacyRTC
 +
 
 +
'''THE DSDT, org.cham.boot, smbios'''
 +
[https://rapidshare.com/files/3635161940/P31-DS3L_2011_12.zip]
 +
 
 +
 
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 +
 
|-
 
|-
 
|X58A-UD7
 
|X58A-UD7
Line 1,105: Line 1,935:
 
*Intel Core I7 1336
 
*Intel Core I7 1336
 
*ATI Sapphire 5770
 
*ATI Sapphire 5770
*10 GB DDR3 SDRAM
 
 
'''Notes:'''
 
'''Notes:'''
 
*Works with this guide : [http://www.youtube.com/watch?v=f6gnFSwRVpI Install Lion retail on your PC]  
 
*Works with this guide : [http://www.youtube.com/watch?v=f6gnFSwRVpI Install Lion retail on your PC]  
Line 1,115: Line 1,944:
 
*Chameleon r1600
 
*Chameleon r1600
 
*Patched NEC driver for USB 3 support (PXHCD.kext)
 
*Patched NEC driver for USB 3 support (PXHCD.kext)
*Download of Content:[http://www.kexts.com/downloads.php?do=file&amp;amp;amp;amp;amp;id=438 Hackintosh.nl X5A-UD7 support download]
+
*Download of Content:[http://www.kexts.com/downloads.php?do=file&id=438 Hackintosh.nl X5A-UD7 support download]
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
Line 1,146: Line 1,975:
 
* Sleep: works with SleepEnabler kext
 
* Sleep: works with SleepEnabler kext
 
|
 
|
* Sound: VoodooHDA [http://www.insanelymac.com/forum/index.php?s=07bd165534a43797d114a04f0eb54de6&amp;amp;amp;amp;amp;act=attach&amp;amp;amp;amp;amp;type=post&amp;amp;amp;amp;amp;id=54359]
+
* Sound: VoodooHDA [http://www.insanelymac.com/forum/index.php?s=07bd165534a43797d114a04f0eb54de6&act=attach&type=post&id=54359]
 
* Ethernet: Lnx2Mac's RTL81xx Driver [http://lnx2mac.blogspot.com/p/realtekrtl81xx-osx-driver.html]  
 
* Ethernet: Lnx2Mac's RTL81xx Driver [http://lnx2mac.blogspot.com/p/realtekrtl81xx-osx-driver.html]  
 
* DSDT patching (minor)
 
* DSDT patching (minor)
Line 1,157: Line 1,986:
 
|'''System Configuration:'''
 
|'''System Configuration:'''
 
* Intel Core 2 Quad Q9550 @ 2.83 GHz
 
* Intel Core 2 Quad Q9550 @ 2.83 GHz
* 12 GB (2x4GB + 2x2GB) DDR2 PC6400 RAM
 
* 128 GB Crucial C300 SSD (Boot)
 
* 1.5 TB Western Digital Caviar Green 5900 RPM HD (Storage)
 
* 500 GB Western Digital Caviar Blue 7200 RPM HD (Backups_
 
 
* EVGA GTX 460 1 GB SC GDDR5 1 GB PCI-e Graphics Card
 
* EVGA GTX 460 1 GB SC GDDR5 1 GB PCI-e Graphics Card
 
* On-Board Gigabit Ethernet
 
* On-Board Gigabit Ethernet
Line 1,172: Line 1,997:
 
|{{Y}}
 
|{{Y}}
 
|-
 
|-
 +
 +
 +
|GA-EP45-UD3R rev 1.0
 +
|Intel P45/ICH10 Bios F11
 +
|'''System Configuration:'''
 +
* Intel Core 2 Duo E6400 2.13 GHz @ 3.00 GHz
 +
* 3x1GB DDR 800 @ 750 (Rare TakeMS CL4 w/heat 4-4-3-10)
 +
* MSI 8600GTS 512 MB PCI-e Graphics Card
 +
* On-Board Gigabit Ethernet
 +
* On-Board Sound ALC889a
 +
|
 +
* Install: Used iAtkos L2 with default options (EvoReboot...) + NVEnabler + Lan RTL8111 + Sensors (CPU/NVIDIA)
 +
* Sound with ALC885_889 didn´t work and installing voodooHDA after setup caused Kernel Panic.
 +
  Solucion: Delete ALC enabler and AppleHDA kext`s (/S/L/E),
 +
  rebuild cache and install latest VoodooHDA with kext wizard.
 +
* Installed Combo 10.7.3 direct from Apple update without any issues.
 +
* For bios tweaks, follow [http://computersclarified.blogspot.com/2011/10/success-specs-motherboard-ga-ep45-ud3r.html Install Guide]
 +
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
  
  
Line 1,178: Line 2,025:
 
|'''System Configuration:'''
 
|'''System Configuration:'''
 
* Intel Core 2 Quad Q9550 @ 2.83 GHz
 
* Intel Core 2 Quad Q9550 @ 2.83 GHz
* 8 GB (2x4GB) G.Skill DDR2 PC6400 RAM
 
* 128 GB Crucial C300 SSD (Boot)
 
* 1.5 TB Western Digital Caviar Green 5900 RPM HD (Storage)
 
 
* EVGA GTX 460 1 GB SC GDDR5 1 GB PCI-e Graphics Card
 
* EVGA GTX 460 1 GB SC GDDR5 1 GB PCI-e Graphics Card
 
* On-Board Gigabit Ethernet
 
* On-Board Gigabit Ethernet
Line 1,190: Line 2,034:
 
* DSDT Auto-Patcher, Multibeast (UserDSDT), Lnx2Mac RTL Kext, Gigabyte ALC8xx, Reinstall AppleHDA10.6.2.pkg, GraphicsEnabler=Yes, npci=0x2000
 
* DSDT Auto-Patcher, Multibeast (UserDSDT), Lnx2Mac RTL Kext, Gigabyte ALC8xx, Reinstall AppleHDA10.6.2.pkg, GraphicsEnabler=Yes, npci=0x2000
 
* For all working specs, please visit [http://computersclarified.blogspot.com/2011/07/building-mac-from-scratch-aka-building.html My Blog]
 
* For all working specs, please visit [http://computersclarified.blogspot.com/2011/07/building-mac-from-scratch-aka-building.html My Blog]
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
 +
|GA-G41M-ES2L rev F9
 +
|Intel G41/ICH7
 +
|'''System Configuration:'''
 +
* Intel Core 2 Duo E7500 @ 2.93 GHz
 +
* NVIDIA 7300GT 512 GB DDR2 PCI-e Graphics Card
 +
* 1xCorsair 2 GB DDR2 800 MHz
 +
* On-Board Gigabit Ethernet
 +
* On-Board Realtek Audio (ALC8xx)
 +
|
 +
* OS X 10.7.2 Lion iAtkos L2 ([http://uphuck.ggrn.org/forum/viewtopic.php?f=73&t=18840&sid=c0a6561495df29a1037c9f6a62b347e8 UPHUCK Install Guide])
 +
* Lnx2Mac RTL Kext, Gigabyte ALC8xx, GraphicsEnabler=Yes, For 7300GT install drivers from Multibeast 4.2.1 for lion(EasyBeast metod)
 +
* For easy install, no need set drivers
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
Line 1,200: Line 2,060:
 
* '''on-board mod bios''' F10b based
 
* '''on-board mod bios''' F10b based
 
* Intel Core 2 Quad Q9550 @ 2.83 GHz
 
* Intel Core 2 Quad Q9550 @ 2.83 GHz
* 8 GB (4x2GB ) DDR2 800mhz RAM Geil
 
 
* PNY-Nvidia Quadro FX 4600 768mb
 
* PNY-Nvidia Quadro FX 4600 768mb
* 4X Sata2 Seagate 500 gb 32mb buffer
 
* DVD Pioneer DVR-215D Bulk sata
 
 
* on-board  ALC889a  
 
* on-board  ALC889a  
 
* 2X Ethernet Realtek 8111C (only 1 works)
 
* 2X Ethernet Realtek 8111C (only 1 works)
Line 1,220: Line 2,077:
 
* Smbios MP3,1
 
* Smbios MP3,1
 
* Intel sata kext
 
* Intel sata kext
* Jmicron SATA/IDE (not tested)
+
* Jmicron SATA/IDE (?)
 
* Lan Realtek 81xxx
 
* Lan Realtek 81xxx
 
* Audio ALC885_889a (replace in S/L/E after each updt)
 
* Audio ALC885_889a (replace in S/L/E after each updt)
Line 1,231: Line 2,088:
 
|'''Hardware:'''
 
|'''Hardware:'''
 
* Intel Core i7 2600k  
 
* Intel Core i7 2600k  
* 4 GB DDR3 Kingston Value RAM 
 
* 1 TB Samsung Spinpoint 7200RPM
 
 
* MSI GTX 560 TI Twin Frozr ll  
 
* MSI GTX 560 TI Twin Frozr ll  
 
'''Notes:'''
 
'''Notes:'''
Line 1,248: Line 2,103:
 
|'''Hardware:'''
 
|'''Hardware:'''
 
* Intel Core i7 2600k  
 
* Intel Core i7 2600k  
* 16 (4x4gb) GB DDR3 1600 Mhz Corsair Vengeange
 
* 1 TB WD Caviar Green
 
* 2x115gb Corsair SSD in raid 0
 
 
* Gigabyte GTX 560
 
* Gigabyte GTX 560
 
* Bluray Burner Lg HL-DT-ST BD-RE  BH08LS20
 
* Bluray Burner Lg HL-DT-ST BD-RE  BH08LS20
Line 1,267: Line 2,119:
  
 
|-
 
|-
|GA-EP43-UD3L
+
|GA-EP43-DS3LL
 
|Intel P43+ICH10
 
|Intel P43+ICH10
 
|
 
|
*CPU Intel 2.8 GHz Intel Core 2 Duo
+
*CPU Intel 2.8 GHz Intel Core 2 Duo E7400
*NVidia GeForce GTS 450 1024 MB
+
*NVidia Ati HD5670 1024 MB
*4GB Kingston RAM [email protected]
+
*Install Method: iATKOSL2 10.7.2:
*Install Method: Kakewalk (with fresh installation):
+
*Updated with 10.7.4 Combo Update
*Installed with '''laikexpert''' Guide:[http://www.kakewalk.se/forums/discussion/3263/success-gigabyte-ep43-ud3l-installed-mac-os-x-10.7-lion-updated-to-10.7.2#Item_1]
+
*Installed with '''laikexpert''' Guide:[http://www.osx86.net/desktops/12776-guide-gigabyte-ep43-ud3l-installed-mac-os-x-10-7-lion-updated-10-7-2-a.html]
+
*Updated with 10.7.2 Combo Update
+
 
|
 
|
 
*All works except Sleep Mode
 
*All works except Sleep Mode
Line 1,305: Line 2,154:
 
* Chipset: Intel Z68
 
* Chipset: Intel Z68
 
* BIOS: F10
 
* BIOS: F10
* RAM: 12GB (2x4GB Kingston + 2x2GB DDR3-1333)
 
* Storage: 1TB Seagate 7200 RPM Sata 2 (turn on AHCI in BIOS)
 
* Optical: Pioneer DVD-RW DL 22x Sata 2
 
 
* Graphics: Zotac GTX 465 1GB GDDR5 (patches from Multibeast,Graphics Enabler=Yes npci=0x2000)
 
* Graphics: Zotac GTX 465 1GB GDDR5 (patches from Multibeast,Graphics Enabler=Yes npci=0x2000)
 
* Audio: Realtek ALC889, Used ALC8xx Enabler and AppleHDA.kext rollback from 10.6.2
 
* Audio: Realtek ALC889, Used ALC8xx Enabler and AppleHDA.kext rollback from 10.6.2
Line 1,322: Line 2,168:
 
* After reboot, went to audio settings to select Line Out
 
* After reboot, went to audio settings to select Line Out
 
* Everything works perfectly, Note: if you try VoodooHDA, it will kernel panic on boot
 
* Everything works perfectly, Note: if you try VoodooHDA, it will kernel panic on boot
* With CPU at stock 3.4GHz, I get 11,984 score with Geekbench 32 bit
 
 
* Notes: Make sure to enable HEPT 64 bit and AHCI in BIOS
 
* Notes: Make sure to enable HEPT 64 bit and AHCI in BIOS
 
| {{Y}}
 
| {{Y}}
Line 1,334: Line 2,179:
 
*CPU: I7 2600
 
*CPU: I7 2600
 
*Graphics: Onboard HD 3000 Fully recognized with QE/CI working
 
*Graphics: Onboard HD 3000 Fully recognized with QE/CI working
*Sound works with hdmi audio applehda.kext [http://www.tonymacx86.com/viewtopic.php?t=33592&p=215126]
+
*Sound works with hdmi audio applehda.kext [http://www.tonymacx86.com/viewtopic.php?t=33592&amp;amp;p=215126]
 
*Sleep Mode doesn't work yet haven't tried to fix it
 
*Sleep Mode doesn't work yet haven't tried to fix it
 
*sata works
 
*sata works
Line 1,351: Line 2,196:
 
* Install Lion on you mbr partition
 
* Install Lion on you mbr partition
 
* Once lion is installed and before you reboot install combo update 10.7.2 after that follow gordo74's guide to install multi beast lion edition now use smbios 5,1 mac mini as it states in gordo74's guide. IF YOU DONT FOLLOW THIS LAST STEP TO A T YOU WILL HAVE MAJOR ISSUES WITH YOUR INSTALL!  
 
* Once lion is installed and before you reboot install combo update 10.7.2 after that follow gordo74's guide to install multi beast lion edition now use smbios 5,1 mac mini as it states in gordo74's guide. IF YOU DONT FOLLOW THIS LAST STEP TO A T YOU WILL HAVE MAJOR ISSUES WITH YOUR INSTALL!  
* [http://www.tonymacx86.com/viewtopic.php?f=168&t=32306&hilit=ud3h+1.3]
+
* [http://www.tonymacx86.com/viewtopic.php?f=168&amp;amp;t=32306&amp;amp;hilit=ud3h+1.3]
* [http://www.tonymacx86.com/viewtopic.php?f=168&t=32306&hilit=ud3h+1.3]
+
* [http://www.tonymacx86.com/viewtopic.php?f=168&amp;amp;t=32306&amp;amp;hilit=ud3h+1.3]
 
* The key to dsdt on this board is to use smbios for a mac mini
 
* The key to dsdt on this board is to use smbios for a mac mini
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|-
 
|-
 +
|-
 +
|GA-EP45T-UD3LR
 +
|Intel P45/ICH10
 +
|'''Hardware:'''
 +
*Intel Socket 775 Q9550 CPUs
 +
*ATI Saphire 4850
 +
'''Notes:'''
 +
*Install Method: Iatkos L2
 +
*MultiBeast installed after first boot
 +
 +
|'''Note:'''
 +
After Multibeast All Works.
 +
Graphic Enabled with QE/CI.
 +
Combo update to 10.7.3 or 10.7.4 failed for Graphic driver issue.
 +
|{{Y}}
 +
|{{Y}}
 +
 +
|-
 +
|G41M-Combo
 +
|Intel G41 Chipset
 +
|'''Hardware:'''
 +
*Intel Core2 Duo 2.8 Ghz
 +
*RAM: 4GB DDR3
 +
*GPU: Palit GeForce GT 240 – 1GB DDR3
 +
'''Install Method:'''
 +
*iAtkosL2
 +
 +
|'''Note:'''
 +
*Installed iAtkos L2, used all defaults removed graphics enabler and used NVEnabler. Kernel panic sometimes when booting to 64bit. set boot to permanent 32bit.
 +
*Used AtherosL1cEthernet.kext and RTL8187L for wifi
 +
*Everything works!
 +
*[http://petiksmode.com/2012/10/09/how-to-install-mac-os-x-lion-on-your-pc-hackintosh-the-easy-way/ install GUIDE here]
 +
|{{Y}}
 +
|{{Y}}
 +
 
|}
 
|}
  
Line 1,365: Line 2,245:
 
!Notes
 
!Notes
 
!Patches Used
 
!Patches Used
!colspan=2| 32/64bit working ''with'' patches
+
!colspan=2| 32/64bit working ''with'' patches|-
 +
|-
 +
|DH61WW
 +
|H61 PCH
 +
|Intel® Core i3 2100 @ 3.10GHz - Core i7 2600 3.4Ghz
 +
* NVIDIA GeForce 210 1GB Graphics Card
 +
* (Palit GeForce 210 1 GB DDR3 PCI-Express)
 +
* nVidia® 8400GS 512mb EVGA- Dual Ready - Full Support - Graphics Enabler IATKOS L2
 +
* Intel® 82579V Gigabit Ethernet Controller
 +
* Intel® High Definition Audio - Realtek HD Audio ALC892 Codec
 +
* Installed using iATKOS L1 updated to 10.7.2 using Software Update
 +
* Used Multibeast for Lion for Chimera Bootloader and UserDSDT Install and other Patches/Drivers
 +
|UserDSDT Install
 +
* ALC 8xx , ALC Rollback, ALC892 Enabler
 +
* Fake SMC
 +
* AppleIntelE1000e.kext for Intel 82579V Ethernet to work
 +
* use GraphicsEnabler=Yes for nVidia
 +
* Enable AHCI in the BIOS first, before Installation
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 
|-
 
|-
 
|DH67BL
 
|DH67BL
 
|H67
 
|H67
 
|Intel® Core i7 2600
 
|Intel® Core i7 2600
* 16GB DDR3 1333Mhz
 
 
* nVidia® GTX460 - Dual Ready - Full Support
 
* nVidia® GTX460 - Dual Ready - Full Support
 
* (ZOTAC® GTX460 - 768MB)
 
* (ZOTAC® GTX460 - 768MB)
Line 1,383: Line 2,282:
 
* hank's AppleIntelE1000e Ethernet
 
* hank's AppleIntelE1000e Ethernet
 
* USB 3.0 Renesas Patch  
 
* USB 3.0 Renesas Patch  
* For nVidia - edited AppleGraphicsPowerManagment.kext, edited NVDAGF100Hal.kext (added device id 0e22), Open Cl patched GeforceGl.bundle. to download all the kest and bundle, [http://www.osx86.net/view/1763-gtx_460_id_0e22_full_acceleration_10.7.1.html Clickhere]
+
* For nVidia - edited AppleGraphicsPowerManagment.kext, edited NVDAGF100Hal.kext (added device id 0e22), Open Cl patched GeforceGl.bundle. to download all the kest and bundle, [http://www.osx86.net/view/1763-gtx_460_id_0e22_full_acceleration_10.7.1.html]
 
* use GraphicsEnabler=Yes for nVidia
 
* use GraphicsEnabler=Yes for nVidia
* Some HDD move than &amp;amp;amp;amp;gt;1TB isnt boot of 4kSector Problems, if it is, install Chameleon in EFI before reboot
+
* Some HDD move than &amp;amp;amp;amp;amp;amp;gt;1TB isnt boot of 4kSector Problems, if it is, install Chameleon in EFI before reboot
 
* for kext request - iamdines at gmail . com
 
* for kext request - iamdines at gmail . com
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|-
 +
|DG41RQ
 +
|Intel® G41
 +
|Intel® Core E7300
 +
* MSI nVidia® 9600GT - Dual Ready - Full Support
 +
* Realtech 81xx controller
 +
* Intel® High Definition Audio - User Voodoo 2.6.1
 +
* USB 2.0
 +
* Used Iatkos L2 if problems, use DSDT fixer
 +
'''Note:''' Sleep Not working, Icloud and Apple store issues present
 +
|UserDSDT Install
 +
* Realtech 81xx  - for network
 +
* Voodoo 2.6.1 for audio
 +
* Fake SMC
 +
* NullCPUPowerManagement
 +
* User NV enabler - Yes
 +
* use GraphicsEnabler=Yes for nVidia
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
Line 1,393: Line 2,312:
 
|P67
 
|P67
 
|Intel core i3 2100 ok
 
|Intel core i3 2100 ok
*8gb ddr3 1333 - to install use 4gb ram
 
 
*radeon hd4850 sapphire 512mb - ok dual display
 
*radeon hd4850 sapphire 512mb - ok dual display
 
*network intel 82579v  
 
*network intel 82579v  
Line 1,399: Line 2,317:
 
*usb 3.0 nec/renesas
 
*usb 3.0 nec/renesas
 
*fw400 - native
 
*fw400 - native
*iBoot 3.1.1 with PCIRootUID=1 -x thanks to user raketa [http://www.tonymacx86.com/viewtopic.php?f=81&amp;amp;amp;amp;amp;t=24107&amp;amp;amp;amp;amp;hilit=dp67de]
+
*iBoot 3.1.1 with PCIRootUID=1 -x thanks to user raketa [http://www.tonymacx86.com/viewtopic.php?f=81&t=24107&hilit=dp67de]
 
*installed with Multibeast 3.8.0 UserDSDT and Dsdt.aml from DSDT fixer
 
*installed with Multibeast 3.8.0 UserDSDT and Dsdt.aml from DSDT fixer
 
|UserDSDT Install
 
|UserDSDT Install
Line 1,416: Line 2,334:
 
|Intel core i7 920
 
|Intel core i7 920
 
*BIOS 5591
 
*BIOS 5591
*6gb DD3 1600
 
 
*XFX AMD HD6870 Black Edition 1024mb 4x Displays
 
*XFX AMD HD6870 Black Edition 1024mb 4x Displays
 
*Onboard Intel Gigabit
 
*Onboard Intel Gigabit
 
*Creative X-Fi Fatal1ty PCI-e (Voodoo Audio 2.7.3)
 
*Creative X-Fi Fatal1ty PCI-e (Voodoo Audio 2.7.3)
*WD 320GB Blue HDD
 
 
*iATKOS 10.7.1 L1 + Software Update to 10.7.2
 
*iATKOS 10.7.1 L1 + Software Update to 10.7.2
 
*installed with Multibeast 3.8.0 UserDSDT and Dsdt.aml from DSDT fixer
 
*installed with Multibeast 3.8.0 UserDSDT and Dsdt.aml from DSDT fixer
Line 1,432: Line 2,348:
 
*Chimera Bootloader
 
*Chimera Bootloader
 
*System IDs as Late 2008 Mac Pro, Vanilla 64bit install, updates through Software update no issues. 1 Caveat to video, if using HD6870 w/ Active MiniDP to DVI adapters, at login you must unplug and replug them or screen is distorted. Then you log out and in again for wallpaper to display properly on all 4 monitors. After this everything is perfect. Researching solution.
 
*System IDs as Late 2008 Mac Pro, Vanilla 64bit install, updates through Software update no issues. 1 Caveat to video, if using HD6870 w/ Active MiniDP to DVI adapters, at login you must unplug and replug them or screen is distorted. Then you log out and in again for wallpaper to display properly on all 4 monitors. After this everything is perfect. Researching solution.
*Cannot get Audio Input to work on Creative Fatal1ty X-Fi. Using cheap (&amp;amp;amp;amp;lt;) USB sound card for microphone support. My onboard audio is dead, though it is supposedly compatible.
+
*Cannot get Audio Input to work on Creative Fatal1ty X-Fi. Using cheap (&amp;amp;amp;amp;amp;amp;lt;) USB sound card for microphone support. My onboard audio is dead, though it is supposedly compatible.
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
Line 1,439: Line 2,355:
 
|D945GCNL
 
|D945GCNL
 
|Intel D945 ICH7
 
|Intel D945 ICH7
|Intel E6600 Core2 Duo - 2GB + 2GB DDR2 - GMA950 - AHCI Mode SATA
+
|Intel E6600 Core2 Duo - GMA950 - AHCI Mode SATA
 
* Install Method: Retail Disk Image install on Hackintosh or Mac - Mac OS X 10.7 (11A511) - Chameleon 2.0 RC5 r1171
 
* Install Method: Retail Disk Image install on Hackintosh or Mac - Mac OS X 10.7 (11A511) - Chameleon 2.0 RC5 r1171
* GMA950 - Works "Dual Display 1920*1200"
+
* GMA950 - Works Dual Display 1920*1200
 
* Ethernet - works
 
* Ethernet - works
* 10.4 - 10.7 compatible "based on development-platform motherboard"
+
* 10.4 - 10.7 compatible based on development-platform motherboard
 
* Software update works from 10.7.0 - 10.7.1 - 10.7.2
 
* Software update works from 10.7.0 - 10.7.1 - 10.7.2
 
|
 
|
Line 1,454: Line 2,370:
 
* IONetworkingFamily.kext
 
* IONetworkingFamily.kext
 
|{{Y}}
 
|{{Y}}
|{{N}}
+
|[[N]]
 
|-
 
|-
 
|-
 
|-
 +
|DG33TL
 +
|G33
 +
|Intel Core 2 Quad Q9400
 +
*BIOS: Latest from Intel
 +
*EVGA GTS 450 FPB OOB (no audio over HDMI)
 +
*Onboard Ethernet working OOB
 +
*Sleep working OOB
 +
*Retail 10.7.0, upgraded to 10.7.2 flawlessly
 +
*Installed with Multibeast via Tonymacx86
 +
|UserDSDT Install
 +
*FULL GUIDE HERE: [http://whatthetech.painesvilleag.com/tutorials/hackintosh-1-0]
 +
*User DSDT (found at link above)
 +
*Chimera Bootloader
 +
*System Definition: Mac Pro 3,1
 +
*On-board Audio not supported, USB audio card purchased
 +
|{{Y}}
 +
|{{Y}}
 
|-
 
|-
 +
|-
 +
|DP35DP
 +
|P35 Express
 +
|Intel Core 2 Duo E6700
 +
*BIOS: Latest from Intel
 +
*XFX Geforce GT 520 OOB
 +
*RAM DDR2 800Mhz 4GB (PC2-6400)
 +
*Onboard Ethernet working with Mutibeast 4.2.1
 +
*Sleep ?
 +
*Retail 10.7.0, upgraded to 10.7.2 using combo !!NOT FORM SOFTWARE UPDATE!!
 +
*Installed with Multibeast 4.2.1 via Tonymacx86
 +
|EasyBeast Install
 +
*Chimera Bootloader
 +
*On-board Audio works with VoodooHDA
 +
*Select Intel82566MM.kext in MutiBeast for Ethernet
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|-
 +
|DP45SG
 +
|P45 
 +
|2.83 GHz Quad-Core Intel Xeon
 +
*GeForce 8400 GS 256 MB PCI-E high res working
 +
*RAM 6 GB 1333 MHz DDR3
 +
*Onboard Intel® 82567LF Gigabit (10/100/1000 Mb/s) Ethernet
 +
*Onboard IDT 92HD Soundcard with microphone
 +
*USB fully working
 +
*Display sleep working, HD / PC not
 +
*10.7.2 with iAtkos L2
 +
|iAtkos L2 Install
 +
*Changed BIOS SATA mode to AHCI (very important)
 +
*Burned iATKOS L2 to DVD, booted, installed, enabled flag USBBusfix=yes on boot after install
 +
*Graphics enabler on
 +
*Downloaded kext helper and
 +
*Installed Intel82566MM.kext (ethernet)
 +
*Installed VoodooHDA.kext (Voodoo HDA mic version) (sound)
 +
|{{Y}}
 +
|{{Y}}
 
|}
 
|}
  
Line 1,472: Line 2,443:
 
|'''System Configuration:'''
 
|'''System Configuration:'''
 
* Intel Core i5-750
 
* Intel Core i5-750
* 4x2GB DDR3 1330MHz (Kingston)
 
* 2x1TB SAMSUNG HD103SJ
 
 
* ASUS GeForce EN210 Silent 512MB
 
* ASUS GeForce EN210 Silent 512MB
 
* Broadcom USB Bluetooth Adapter (0x016a, 0x050d) to connect my Magic Trackpad
 
* Broadcom USB Bluetooth Adapter (0x016a, 0x050d) to connect my Magic Trackpad
Line 1,499: Line 2,468:
 
|Yes
 
|Yes
 
|Yes
 
|Yes
 +
 
|-
 
|-
 +
|MSI P35 Neo2 Fi/Fr
 +
|Intel P35
 +
|'''System Configuration:'''
 +
* Intel Core 2 Duo
 +
* Gigabyte Radeon 5770HD 1024mb
 +
 +
'''Installation:'''
 +
* Download drivers and DSTD from here: [http://www.osx86.net/view/2155-msi_p35_neo2_fi-fr.html]
 +
* Retail (Used UniBeast to make bootable installer from 10.7.0 DMG)
 +
* Use my DSTD.aml, FakeSMC.kext, NullCPUPowerManagement.kext and whole boot folder to boot system.
 +
 +
|'''Patches included'':
 +
* ALC Work & Headphones & Digital out
 +
* 3rdParty SATA + IDE Via Controller works
 +
* Full temps and cools monitor (CPUS, Pipes, Volts)
 +
* FakeSMC
 +
* Sleep (if sleep works on your windows (S3))
 +
* App store
 +
* iCloud
 +
 +
'''Sleep''':
 +
* To fix the CMOS reset after sleep look [http://www.insanelymac.com/forum/index.php?showtopic=253992 here]
 +
 +
|No
 +
|Yes
 +
 +
|-
 +
|67MS-E43(B3)
 +
|Intel H67
 +
|'''System Configuration:'''
 +
* Intel Dual Core G620 2.6 GHz, 3MB Cache (Sandy Bridge)
 +
* ASUS GeForce GS8400 Silent 512MB
 +
 +
'''Installation:'''
 +
iATKOS L2
 +
|'''Patches via Multibeast 4.0.3''':
 +
* AppleHDA
 +
* Lnx2Mac's RealtekRTL81xx
 +
* Chimera v1.5.4 r1394
 +
 +
'''Sleep''':
 +
Everything works out of BOX
 +
 +
| Not Sure
 +
| Yes
 +
 +
|-
 +
|MS 7616
 +
|Intel H55
 +
|'''System Configuration'''
 +
*Intel Core i3 - 530 2.9Ghz, 3MB Cache
 +
*On Board Graphics
 +
 +
'''Installation'''
 +
iAtkos L2
 +
|'''Patches via install disc:'''
 +
*VoodooHDA
 +
*Realtek Wired RTL8111
 +
*Chimera 1.6 (Chameleon also works)
 +
 +
'''Sleep:'''
 +
Kernal Panic
 +
 +
| Yes
 +
| Not Sure
 +
|
 +
 +
|-
 +
|67MS-E43(B3)
 +
|Intel H67
 +
|'''System Configuration:'''
 +
* Intel Dual Core G620 2.6 GHz, 3MB Cache (Sandy Bridge)
 +
* ASUS GeForce GS8400 Silent 512MB
 +
 +
'''Installation:'''
 +
iATKOS L2
 +
|'''Patches via Multibeast 4.0.3''':
 +
* AppleHDA
 +
* Lnx2Mac's RealtekRTL81xx
 +
* Chimera v1.5.4 r1394
 +
 +
'''Sleep''':
 +
Everything works out of BOX
 +
 +
| Not Sure
 +
| Yes
 +
 +
|-
 +
|Z68A-GD80-G3
 +
|Z68
 +
|'''System Configuration'''
 +
*Intel Core i7 - 2500k (4.5GHz Detected at 3.3Ghz)
 +
*GTX570
 +
*500 Gb Sata II HD
 +
 +
'''Installation'''
 +
iAtkos L2
 +
|'''Motherboard Settings''
 +
*SATA: AHCI
 +
*Virtu: Disable
 +
 +
'''Patches via install disc:'''
 +
*FakeSMC
 +
*LegacyRTC
 +
*NullCPUpowerManagement
 +
 +
'''Multibeast'''
 +
*Audio
 +
**AppleHDRollback
 +
**Non-DSDT HDAEnabler ALC892
 +
**ALC8xxHDA
 +
*System Definitions
 +
**MacPro 3,1
 +
 +
'''Network'''
 +
*http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false
 +
*Set MTU to 8982
 +
**network > advance > hardware > configure manually> MTU > 8982
 +
 +
'''GFX 570'''
 +
*Install http://mediafire.com/file/92i32u5vcze4oci/Graphics%20GTX%20570.zip ("Graphics GTX 570.zip")
 +
**Follow instructions but use PCIRootUID=0 instead of =1
 +
 +
| Yes
 +
| Yes
 
|}
 
|}
  
Line 1,505: Line 2,600:
 
Please specify if your card is AGP, Integrated, PCI or PCI-E.<br />
 
Please specify if your card is AGP, Integrated, PCI or PCI-E.<br />
 
Also, place chip and board manufacturer in their respective column.
 
Also, place chip and board manufacturer in their respective column.
 +
===AGP===
 +
====NVIDIA====
 +
{| class="wikitable" width="100%"
 +
!Model
 +
!Board-Manufacturer
 +
!Notes
 +
!QE
 +
!Output
 +
!Dual Display
 +
!colspan="2"| 32/64bit
 +
 +
|-
 +
|GeForce 6600 GT AGP 128MB (NV43)
 +
|NVidia
 +
|Working ONLY in 32bit Mode with [http://www.mediafire.com/?a3dnqwln2dm Aty_init.kext]. The bus type is AGP but System Report as PCIe !!! New ver of ATY_Init 32/64 didt work for me so i use my old ATY_Init.kext i386 only, from my SnowLeopard .
 +
|{{Y}}
 +
|DVI/VGA
 +
|?
 +
|{{Y}}
 +
|{{N}}
 +
 +
|}
  
 
===PCI-E===
 
===PCI-E===
Line 1,534: Line 2,651:
 
|DVI
 
|DVI
 
|{{Y}}
 
|{{Y}}
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
 +
|-
 +
|Radeon HD 4650 512MB DDR2
 +
|XFX
 +
|Add device id 0x94981002 in ATI4600Controller.kext and ATIRadeonX2000.kext
 +
GraphicsEnabler=Yes
 +
||{{Y}}
 +
|DVI
 +
|?
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
Line 1,550: Line 2,679:
  
 
|-
 
|-
|HD5870 1024MB Vapor-X
+
|Radeon HD 4870 1Gb
 +
|Sapphire
 +
|Native support with iATKOS L2
 +
GraphicsEnabler=Yes
 +
Dual Monitor = Works, but I need to change my default monitor to the port DVI 2 and my VGA to DVI monitor to the port DVI 1. I install the drivers ATY_Init and ATI 48xx of the iATKOS L2 but dont have sure if that make the diference.
 +
|{{Y}}
 +
|2X DVI
 +
|{{Y}}
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
 
 +
|-
 +
|Radeon HD 4890 2048MB
 +
|Sapphire
 +
|works with ATY_Init.kext and with the current QE/CI Enabler package from netkas. set GraphicsEnabler=No
 +
||{{Y}}
 +
|DVI
 +
|?
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
 
 +
|-
 +
|HD 5870 1024MB Vapor-X
 
|Sapphire
 
|Sapphire
 
|OOB
 
|OOB
 
|{{Y}}
 
|{{Y}}
 
|DVI
 
|DVI
|Not Tested
+
|?
 +
|{{Y}}
 +
|{{Y}}
 +
 
 +
|-
 +
|HD 5670
 +
|VTX
 +
|install ATI5000Controller.kext to S/L/E WITHOUT adding GraphicsEnabler or ATIConfig to org.chameleon.boot.plist [http://www.osx86.net/view/1998-hd5750_amp;_5xxx_for_lion_10.7.2.html]
 +
|{{Y}}
 +
|VGA/DVI/HDMI
 +
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|-
 
|-
  
 +
|-
 +
|HD 5670
 +
|ASUS
 +
|OOB
 +
|{{Y}}
 +
|DVI
 +
|{{Y}}
 +
|{{Y}}
 +
|{{Y}}
 +
|-
  
|RADEON HD6850 1024MB DDR5   
+
|-
 +
|Radeon HD 5770
 +
|Gigabyte
 +
|Works OOB with GraphicsEnabler=Yes
 +
|{{Y}}
 +
|2x DVI/HDMI
 +
|{{Y}}
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
 
 +
|-
 +
|RADEON HD 6850 1024MB DDR5   
 
|Sapphire
 
|Sapphire
 
|OOB (to enable hdmi audio [http://www.tonymacx86.com/viewtopic.php?f=162&t=32037], GraphicsEnabler=No (recognized as ATI Radeon HD6xxx)
 
|OOB (to enable hdmi audio [http://www.tonymacx86.com/viewtopic.php?f=162&t=32037], GraphicsEnabler=No (recognized as ATI Radeon HD6xxx)
 
|{{Y}}
 
|{{Y}}
|DVI/HDMI & DVI/DVI
+
|3xDVI/HDMI
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
Line 1,589: Line 2,774:
 
|VGA/DVI/HDMI
 
|VGA/DVI/HDMI
 
|{{Y}}
 
|{{Y}}
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
 +
|-
 +
|HD 6670
 +
|Sapphire
 +
|Sapphire HD 6670 1GB GDDR5 Ultimate
 +
PCIRootUID=0
 +
|{{Y}}
 +
|VGA/DVI/HDMI
 +
|{{Y}}
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
 +
|-
 +
|HD 6770
 +
|Sapphire
 +
|Sapphire HD 6770 1GB GDDR5
 +
|{{N}}
 +
|DVI/HDMI/DisplayPort
 +
|?
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
Line 1,599: Line 2,807:
 
|{{Y}}
 
|{{Y}}
 
|VGA/DVI/HDMI
 
|VGA/DVI/HDMI
 +
|{{Y}}
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
 +
|-
 +
|HD 6870
 +
|XFX 1GB / 900Mhz / 1050Mhz / Dual Fan
 +
|Native Support including sound (displayport connected to 27inch Cinema)
 +
|{{Y}}
 +
|DVI/HDMI/mini-displayport
 +
|{{Y}}
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
 +
|-
 +
|HD 6870
 +
|Sapphire 1GB / 900Mhz / 1050Mhz / Single Fan
 +
|Native Support including sound
 +
|{{Y}}
 +
|DVI/DVI/HDMI/DisplayPort
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
Line 1,616: Line 2,846:
  
 
|-
 
|-
|HD6950 2048MB/1024MB
+
|HD 6950 2048MB/1024MB
|XFX/Asus
+
|XFX/Asus/Sapphire
 
|Works with Netkas 6970 fix and flashed to 6970 BIOS. UVD does not currently work (iTunes cover flow)
 
|Works with Netkas 6970 fix and flashed to 6970 BIOS. UVD does not currently work (iTunes cover flow)
 
|{{Y}}
 
|{{Y}}
|DVI/VGA/HDMI
+
|DVI/VGA/HDMI/DisplayPort
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
Line 1,627: Line 2,857:
  
 
|-
 
|-
|HD5670 1024MB
+
|HD 5670 1024MB
 
|powercolor
 
|powercolor
 
|OOD,you need to have graphice enabler =Y,and the aticonfig=Vervet [Vervet is case senstive]
 
|OOD,you need to have graphice enabler =Y,and the aticonfig=Vervet [Vervet is case senstive]
Line 1,648: Line 2,878:
 
|-
 
|-
  
 +
 +
|-
 +
|HD 6450 2GB DDR3
 +
|Sapphire
 +
|Works OOB GraphicsEnabler=No (recognized as ATI Radeon HD6xxx)
 +
|{{Y}}
 +
|VGA/DVI/HDMI
 +
|?
 +
|{{Y}}
 +
|{{Y}}
 +
|-
  
 
|-
 
|-
Line 1,654: Line 2,895:
 
|Works OOB (recognized as ATI Radeon HD6xxx)  
 
|Works OOB (recognized as ATI Radeon HD6xxx)  
 
|{{Y}}
 
|{{Y}}
|DVI/HDMI (VGA not Tested)
+
|DVI/HDMI (VGA ?)
|Not Tested
+
|?
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
 
 +
|-
 +
|HD 6670 1GB DDR5
 +
|Asus
 +
|Works OOB (recognized as ATI Radeon HD6xxx)
 +
|{{Y}}
 +
| HDMI working in full 1080p didn't test other ports
 +
|?
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
Line 1,671: Line 2,923:
 
!Dual display
 
!Dual display
 
!colspan="2"| 32/64bit
 
!colspan="2"| 32/64bit
 +
|-
 +
|Geforce Gtx 550 Ti 1gb
 +
|Nvidia
 +
|Works with iAtkos L2 10.7.2, then updated through software update to 10.7.3, during installation  of iAtkos I selected nvidia enabler
 +
|{{Y}}
 +
|DVI/DVI
 +
|{{Y}}
 +
|{{Y}}
 +
|{{Y}}
 
|-
 
|-
 
|8400 GS 512MB DDR3
 
|8400 GS 512MB DDR3
Line 1,679: Line 2,940:
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|7600 GS 256MB
 +
|
 +
|Works with IATKOS 10.7.2 select nvidia enabler in install
 +
|{{Y}}
 +
|DVI/VGA
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|8200 GS 512MB ddr2
 +
|EVGA
 +
|Works with GraphicsEnabler for nVidia in IATKOS L2 - Check options GraphicsEnabler for Nvidia before install
 +
|{{Y}}
 +
|VGA/DVI
 +
|{{Y}}
 +
|?
 
|{{Y}}
 
|{{Y}}
 
|-
 
|-
Line 1,686: Line 2,964:
 
|{{Y}}
 
|{{Y}}
 
|2xDVI/mHDMI
 
|2xDVI/mHDMI
 +
|{{Y}}
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|8500 GT 256MB
 +
|Club 3D
 +
|Works with IATKOS 10.7.2 select nvidia enabler in install
 +
|{{Y}}
 +
|DVI/VGA
 +
|?
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|8500 GS 512MB DDR3
 +
|???
 +
|Works with Kakewalk Method
 +
|{{Y}}
 +
|DVI/VGA
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
Line 1,693: Line 2,989:
 
|ASUS
 
|ASUS
 
|works full qe/ci with these [http://www.mediafire.com/?vk6wu84za7aao8l]. Install the kexts with the program provided.If doesn't work try changing the device id in the info.plist of the kext with your own(you can find it in system profiler)
 
|works full qe/ci with these [http://www.mediafire.com/?vk6wu84za7aao8l]. Install the kexts with the program provided.If doesn't work try changing the device id in the info.plist of the kext with your own(you can find it in system profiler)
 +
|{{Y}}
 +
|2xDVI
 +
|{{Y}}
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|8800 GTS 320MB
 +
|NVIDIA
 +
|Works best with GraphicsEnabler=Yes - Tested with OSX 10.7.2 and 10.7.3
 +
May cause problems with Adobe Flash-Player under Safari and Firefox. Follow [http://tonymacx86.com/viewtopic.php?f=134&t=26511 this topic] to get informations about it.
 +
|{{Y}}
 +
|2xDVI
 +
|{{Y}}
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|8800 Ultra
 +
|MSI
 +
|Works with GraphicsEnabler=y and NVEnabler 64 for full QE/CI, which you can acquire from here [http://www.osx86.net/view/1795-nvenabler.html]
 
|{{Y}}
 
|{{Y}}
 
|2xDVI
 
|2xDVI
Line 1,701: Line 3,016:
 
|9500GT
 
|9500GT
 
|XFX
 
|XFX
|1 GB model with NVEnabler 64.kext And with GraphicsEnabler=Yes in com.apple.Boot.plist Inside Extra Folder, DVI works Great (but VGA also Works. Defect is that When You Try To Change Resolution Monitor Goes OFF must Restart For Changing Resolution)
+
|Works OOB with GraphicsEnabler=Yes in com.apple.Boot.plist Inside Extra Folder, DVI works Great (but VGA also Works. Defect is that When You Try To Change Resolution. Display Goes OFF must Restart For Changing Resolution)
 
|{{Y}}
 
|{{Y}}
 
|VGA/DVI/HDMI
 
|VGA/DVI/HDMI
 
|?
 
|?
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|9500GT
 +
|XFX
 +
|1 Gb. ddr2 HDMI: Works OOB with NVEnabler - All resolutions works - Dual Monitor work - HDMI: work
 +
|{{Y}}
 +
|VGA/DVI/HDMI
 +
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
Line 1,710: Line 3,034:
 
|9500GT
 
|9500GT
 
|inno3d
 
|inno3d
|1 GB model with NVEnabler 64.kext
+
|1 GB model with NVEnabler 64.kext for 64-bit OS or NVEnabler.kext for 32-bit OS
 
|{{Y}}
 
|{{Y}}
 
|VGA/DVI/HDMI
 
|VGA/DVI/HDMI
 
|{{Y}}
 
|{{Y}}
|{{N}}
+
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|-
 
|-
Line 1,743: Line 3,067:
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 +
|-
 +
|9800GT 512MB
 +
|Palit
 +
|GraphicsEnabler=Yes
 +
|{{Y}}
 +
|VGA/DVI/HDMI
 +
|{{Y}}
 +
|{{Y}}
 +
|?
 
|-
 
|-
 
|9800GT 1GB
 
|9800GT 1GB
Line 1,776: Line 3,109:
 
|{{Y}}
 
|{{Y}}
 
|VGA/DVI/HDMI
 
|VGA/DVI/HDMI
 +
|{{Y}}
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|Geforce GT 220 1024MB DDR2 (LP)
 +
|ASUS
 +
|works with NVEnabler kext
 +
|{{Y}}
 +
|VGA/DVI
 +
|?
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|GT240 512MB DDR3
 +
|XFX
 +
|Work with retail. GraphicsEnabler=Yes, PCI Configuration Fix (npci=0x2000. No patches. Work fine in 10.7.1, 10.7.2. Tested on a monitor 22" 1920x1080 full hd
 +
|{{Y}}
 +
|DVI/VGA/HDMI
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
Line 1,803: Line 3,154:
 
|{{Y}}
 
|{{Y}}
 
|DVI
 
|DVI
|Not Tested
+
|?
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
Line 1,831: Line 3,182:
 
|{{Y}}
 
|{{Y}}
 
|2xDVI/mHDMI
 
|2xDVI/mHDMI
 +
|?
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|-
 +
|GTX 470 1280GB
 +
|Palit
 +
|Installed OOB don't add anything do not install GF100 leave graphics default using iATKOS 10.7.2
 +
|{{Y}}
 +
|HDMI
 
|?
 
|?
 
|{{Y}}
 
|{{Y}}
Line 1,851: Line 3,212:
 
|{{Y}}
 
|{{Y}}
 
|2xDVI/mHDMI(no audio)
 
|2xDVI/mHDMI(no audio)
 +
|{{Y}}
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|GTX560 2GB - 336 cores
 +
|Zotac
 +
|added device id (1201) to NVDAGF100hal. GraphicsEnabler=Yes, npci=0x2000, PCIRootUID=1 in boot.plist.  CUDA drivers installed from Nvidia and work fine with the SDK samples
 +
|{{Y}}
 +
|2xDVI / HDMI (audio ?) / Display Port Fullsize (?)
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
Line 1,859: Line 3,229:
 
|added device id to NVDAGF100hal.kext, installed ATY_init.kext, GraphicsEnabler=Yes, npci=0x2000, followed  [http://www.insanelymac.com/forum/lofiversion/index.php/t260074.html this guide],
 
|added device id to NVDAGF100hal.kext, installed ATY_init.kext, GraphicsEnabler=Yes, npci=0x2000, followed  [http://www.insanelymac.com/forum/lofiversion/index.php/t260074.html this guide],
 
installer [http://www.osx86.net/downloads.php?do=file&id=2074 here]
 
installer [http://www.osx86.net/downloads.php?do=file&id=2074 here]
 +
|{{Y}}
 +
|2xDVI/mHDMI
 +
|{{Y}}
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|GTX 560 ti-448 1,28GB
 +
|Palit
 +
|added device id 0x108710de&amp;0xffc0ffff to NVDAGF100hal.kext, GraphicsEnabler=Yes, Chameleon rev. 1726
 
|{{Y}}
 
|{{Y}}
 
|2xDVI/mHDMI
 
|2xDVI/mHDMI
Line 1,878: Line 3,257:
 
|Asus
 
|Asus
 
|Using MultiBeast, in "Customization"/"Boot Options", check "32-bit Apple Boot Screen" and "PCI Root ID Fix", reboot. If you still have only one resolution, edit "com.apple.boot.plist" file (use Finder to locate it) and add/replace the following lines:  
 
|Using MultiBeast, in "Customization"/"Boot Options", check "32-bit Apple Boot Screen" and "PCI Root ID Fix", reboot. If you still have only one resolution, edit "com.apple.boot.plist" file (use Finder to locate it) and add/replace the following lines:  
* <key>Graphics Mode</key>
 
* <string>1920x1200x32</string>
 
 
* <key>GraphicsEnabler</key>
 
* <key>GraphicsEnabler</key>
 
* <string>Yes</string>
 
* <string>Yes</string>
* <key>Kernel</key>
 
* <string>mach_kernel</string>
 
* <key>Kernel Flags</key>
 
* <string>-v</string>
 
 
|{{Y}}
 
|{{Y}}
 
|DVI
 
|DVI
 
|?
 
|?
 
|?
 
|?
 +
|{{Y}}
 +
|-
 +
|GTX 285 1024Mb
 +
|Inno3D
 +
|Works 100% with GraphicsEnabler = Yes
 +
|{{Y}}
 +
|2xDVI
 +
|{{Y}}
 +
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|-
 
|-
Line 1,906: Line 3,288:
 
!Notes
 
!Notes
 
!colspan="2"| 32/64bit working ''with'' patch
 
!colspan="2"| 32/64bit working ''with'' patch
 +
|-
 +
|PCI
 +
|b/g
 +
|WL-138g V2
 +
|ASUS
 +
|Broadcom
 +
|Works OOB
 +
|{{Y}}
 +
|{{Y}}
 
|-
 
|-
 
|PCI
 
|PCI
Line 1,923: Line 3,314:
 
|Broadcom
 
|Broadcom
 
|Works OOB
 
|Works OOB
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|USB
 +
|b/g/n
 +
|RTL8191S
 +
|Realtek
 +
|Realtek
 +
|Download drivers Realteck Version 1082 ui VERSION 1.9.7 FOR MODEL RTL8191SU [http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PFid=48&Level=5&Conn=4&ProdID=229&DownTypeID=3&GetDown=false&Downloads=true] 
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|USB
 +
|802.11 b/g/n
 +
|IOGEAR GWU625
 +
|IOGEAR
 +
|RTL8191SU
 +
|Download driver [http://www.iogear.com/support/dm/driver/GWU625#display here]
 +
|{{N}}
 +
|{{Y}}
 +
|-
 +
|USB
 +
|b/g/n
 +
|WL-167G V3
 +
|ASUS
 +
|Realtek RTL8188SU
 +
|Works with drivers from the ASUS website - located on the [http://uk.asus.com/Networks/Wireless_Adapters/WL167G_V3/ ASUS Product Page].
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
Line 1,932: Line 3,350:
 
|
 
|
 
| Download 10.6 Installer from [http://www.trendnet.com/downloads/list_subcategory.asp?SUBTYPE_ID=1353]
 
| Download 10.6 Installer from [http://www.trendnet.com/downloads/list_subcategory.asp?SUBTYPE_ID=1353]
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|USB
 +
|b/g/n
 +
|TEW-648UB
 +
|TRENDnet
 +
|
 +
| Download 10.6 Installer from [http://www.trendnet.com/downloads/list_subcategory.asp?SUBTYPE_ID=1350]
 +
10.6 Installer from Trendnet is unstable under 10.7.  The TEW-648UB used a Realtek RTL8188SU chip.  Use the 10.7 driver from Realtek [http://218.210.127.131/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=48&Level=5&Conn=4&DownTypeID=3&GetDown=false&Downloads=true].  Trendnet simply repackages this driver anyway, but they have failed to included Realteks 10.7 driver in their latest release.
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
Line 1,958: Line 3,386:
 
|TP-Link  
 
|TP-Link  
 
|Broadcom
 
|Broadcom
|32-bit PCI Omni Directional, 2 Detachable Antennas; Works OOB as native Airport Extreme card in all versions of OS X since 10.5.
+
|32-bit PCI Omni Directional, 2 Detachable Antennas; Works OOB as native Airport Extreme card in all versions of OS X since 10.5. Kernel Panics with Core i5.
|{{N}}
+
|{{Y}}
 
|{{N}}
 
|{{N}}
 +
|-
 +
|PCI
 +
|b/g/n300
 +
|TL-WN851ND
 +
|TP-Link
 +
|Atheros 9287
 +
|Detected as "Wi-Fi" in Network settings after installing [http://www.osx86.net/view/2046-tp-link_tl-wn851nd_atheros_ar9287.html THIS KEXT], repairing permissions and re-booting.
 +
|{{U}}
 +
|{{Y}}
 
|-
 
|-
 
|PCI
 
|PCI
Line 1,967: Line 3,404:
 
|TP-Link  
 
|TP-Link  
 
|Broadcom
 
|Broadcom
|Works OOB
+
|Works OOB. Kernel Panics with Core i5/i7. Does Not work with i3, detects wireless but then crashes once connected.
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|-
 
|-
 
|USB
 
|USB
|802.11b/g 54Mbps
+
|b/g
 
|DWL-G122
 
|DWL-G122
 
|D-Link
 
|D-Link
Line 1,986: Line 3,423:
 
|Ralink
 
|Ralink
 
|Works with Ralink's installer (RT2870) Download [http://www.ralinktech.com/en/04_support/support.php?sn=502 here].
 
|Works with Ralink's installer (RT2870) Download [http://www.ralinktech.com/en/04_support/support.php?sn=502 here].
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|USB
 +
|b/g/n
 +
|DWA-DWA125
 +
|D-Link
 +
|Ralink
 +
|works with Snow Leopard driver on the CD
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|USB
 +
|b/g/n
 +
|DWA-123 H/W: D1
 +
|D-Link
 +
|Realtek RTL8188ETV
 +
|Works with driver for TP-Link TL-WN821N v4. Please download from [http://www.tp-link.us/support/download/?model=TL-WN821N&version=V4 TP-LINK]
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
Line 2,004: Line 3,459:
 
|TP-Link
 
|TP-Link
 
|Atheros 9285
 
|Atheros 9285
|TESTED on i5, working in Mac OS X Lion 10.7.2 (11C74), appears as "AirPort Extreme (0x168C, 0x30A1)". Needed kexts: AtherosFix.kext and IO80211Family.kext. Then edit IO80211Family.kext in S/L/E/IO80211Family.kext/Contents/PlugIns/
+
|TESTED WORKING on i5, Lion 10.7.2 (11C74), appears as "AirPort Extreme (0x168C, 0x30A1)". Needed kexts: AtherosFix.kext and IO80211Family.kext. Then edit IO80211Family.kext in S/L/E/IO80211Family.kext/Contents/PlugIns/
AirPortAtheros21.kext/Contents/Info.plist/ add: <string>pci168c,002b</string>, <string>pci168c,30a1</string>. Also edited same for AirPortAtheros40.kext, as well as added to plist for AtherosFix.kext. Kext wizard to install.  
+
AirPortAtheros21.kext/Contents/Info.plist/ add: <string>pci168c,002b</string>, <string>pci168c,30a1</string>. Also edited same for AirPortAtheros40.kext, as well as added to plist for AtherosFix.kext. Kext wizard to install. After install, may have to create "WiFi" location in System Prefrences > Network.
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|{{Y}}
Line 2,017: Line 3,472:
 
|{{Y}}
 
|{{Y}}
 
|{{U}}
 
|{{U}}
 +
|-
 +
|USB
 +
|b/g/n
 +
|G9000
 +
|Kasens
 +
|Ralink 3070
 +
|Working on a x64 system, used this [http://www.ralinktech.com/en/04_support/license.php?sn=5004 drivers] not the ones that come with the CD.
 +
|{{U}}
 +
|{{Y}}
 
|-
 
|-
 
|}
 
|}
Line 2,039: Line 3,503:
 
|{{Y}}
 
|{{Y}}
 
|-
 
|-
|OnBoard (P5Q Deluxe)
+
|OnBoard Gigabyte Realtek 8111E
 
|1000/100/10
 
|1000/100/10
|Yukon 88E8056 PCI-E Gibgabit Ethernet
+
|Realtek 8111E
|Marvell
+
|Realtek
|Install "IONetworkingFamily.kext" (found it in a forum's Extra.Zip file) using MultiBeast's "Kext Utility" then reboot. If your internet source is already active from your router, go to "System Preferences"/"Network" and click "Apply" so the connection gets set up.
+
|Install Realtek Ethernet  from MultiBeast.
|Not Tested Yet
+
|?
 +
|{{Y}}
 +
|-
 +
|OnBoard Realtek 8101E/8102E
 +
|10/100
 +
|Realtek 8136:10EC
 +
|Realtek
 +
|From realtek web.
 +
|?
 +
|{{Y}}
 +
|-
 +
|PCI
 +
|1000/100/10
 +
|RTL8169SC
 +
|REALTEK
 +
|Add the missing/removed vanilla S/L/E/IONetworkingFamily.kext/
 +
Contents/Plugins/AppleRTL8169Ethernet.kext, from a 10.6.8 installation, to the same place in the 10.7.1 vanilla IONetworkingFamily.kext. No mods, it just works.
 +
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|-
 
|-
Line 2,084: Line 3,565:
 
|Works out of the box.
 
|Works out of the box.
 
|?
 
|?
 +
|{{Y}}
 +
|-
 +
|USB
 +
|MacBook Bluetooth Module + USB Connector
 +
|Apple
 +
|Get one of these: [http://www.thebookyard.com/images/MB08BTBRD.jpg] with antenna as well. Add USB Connector > Black=GND,Yellow=D+,Green=D-,Red=Add 3.3v regulator to +5v. Wake from Sleep + BIOS Work.
 +
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|-
 
|-
Line 2,105: Line 3,593:
 
|-
 
|-
 
|PCI
 
|PCI
|Sound Blaster Audigy 2 Sound Card
+
|Sound Blaster Audigy 2 Sound Card And Audigy 2 ZS
 
|Creative Labs
 
|Creative Labs
|Install [http://content.wuala.com/contents/dudyk/Macintosh/kexts/kXAudioDriver-1.11b0.dmg?dl=1&lang=fr kXAudioDriver-1.11b0] drivers
+
|Install [http://kb.kxproject.lugosoft.com kXAudioDriver-1.11b0] drivers
|Not Tested Yet
+
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|-
 
|-
Line 2,115: Line 3,603:
 
|Creative Labs
 
|Creative Labs
 
|Works OOB
 
|Works OOB
|Not Tested Yet
+
|?
 +
|{{Y}}
 +
|-
 +
|-
 +
|USB
 +
|C-MEDIA CM-108 USB
 +
|C-MEDIA
 +
|No need driver, just plug into the USB and enjoy!
 +
It work 100% ! :)
 +
|{{Y}}
 
|{{Y}}
 
|{{Y}}
 
|-
 
|-
Line 2,127: Line 3,624:
 
!Notes
 
!Notes
 
!colspan="2"| 32/64bit working ''with'' patch
 
!colspan="2"| 32/64bit working ''with'' patch
 +
|-
 +
|Logitech H360 Headset
 +
|USB Headset
 +
|Logitech
 +
|Works OOB
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|Razer Piranha Headset
 +
|USB Headset
 +
|Razer
 +
|Works OOB
 +
|{{Y}}
 +
|{{Y}}
 
|-
 
|-
 
|Vantec UGT-ST420R  
 
|Vantec UGT-ST420R  
Line 2,135: Line 3,646:
 
|{{Y}}
 
|{{Y}}
 
|-
 
|-
 +
|Wacom Cintiq 12WX
 +
|Graphic tablet vga and usb connection
 +
|Wacom
 +
|You can use official driver from Wacom web site.
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|Logitech C210 1.3 M Effective Pixels WebCam
 +
|Logitech Web Camera
 +
|Logitech
 +
|Works out of the box, but takes 10 seconds to load.
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|3Ware 9650SE
 +
|SATA RAID controller
 +
|3Ware / AMCC / LSI
 +
|Works with official Lion driverset - as of Oct. 2017 found through Broadcom's hardware support site
 +
|{{Y}}
 +
|{{Y}}
 
|}
 
|}

Latest revision as of 00:02, 7 October 2017

macOS 10.7.2
Hardware Compatibility

This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for 10.7.2 builds only.

For how to edit the Wiki, please see this thread. Thank you!

You're looking for an Installation guide? see here

Contents

[edit] Motherboards

[edit] Abit

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
i-45cv i-45cv sleep not working,shutdown and reboot work, LAN works with Marvell Yukon 88E8056 drivers in iAtkos L2, HDMI Audio works using this guide: [1]. Audio works with custom VoodooHDA kext found here: [2] Voodoo HDA Patch: [3] Cross.png Tick.png

[edit] Asrock

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
775i65G R2.0 Intel® 865G - ICH5 Sleep does not work. Everything else works fine 32bit ONLY!!!

System Configuration:

  • CPU: Intel® Pentium® Processor E5300
  • Graphics: GeForce 6600 GT AGP 128MB
  • Audio: Cmedia 9761A on board, Audigy 2 PCI
  • LAN: Realtek PCI LAN 8101L on board
  • Memory: 2GB Dual Channel DDR400 (2x1GB)
  • HDD: Raptor 36GB Sata 3.5", Seagate 250GB Sata 2.5", Maxtor 40GB IDE

onboard video card do not work (didt test...)!!!!!

Installation:
  • iAtkos L2 dvd modded with IOATAFamily for Lion (a modded IOATAFamily (v2.5.1) from the 10.7.0 Lion Install Disk Image. It enables booting and installing from SATA IDE Enhanced/Compatible Mode. It's for those who can't boot/install with AHCI nor have this option in BIOS. ONLY FOR ICHx-based SATA chipsets/southbridges.)
  • Bootloader: chameleon 2.1
  • Bootloader options: built in ethernet, 32bit boot
  • Patches:
    • fakeSMC
    • Disabler: RTC
    • evoreboot
  • Drivers:
    • Main Hardware: NON ACHI SATA (don't forget or else no ich5 ide/sata support and you ll stuck on apple logo..)
  • PS/2 (choose if you have ps2 mouse or keyboard)

Kexts:

  • Graphics: GeForce 6600 GT AGP 128MB Aty_init.kext 32bit ONLY from 10.6.x . bus shows agp as pcie !!! QE/CI works . at least i can see dvd, play chess, view youtube. OpenGLExtensionViewer 3.37 report Render: NVIDIA GEFORCE 6600 GT OpenGL Engine!! (tnx Netkas for ATY_Init.kext)
  • Audio: Cmedia 9761A on board AppleAC97.kext for Snow Leopard i386/x86_64 but works with LION i've tested 2inputs , 2outputs Volume slider don't work (classic bug...)
  • LAN: Realtek PCI LAN 8101L on board PCGenRTL8139Ethernet.kext 8139:10EC: Realtek RTL8139/810x Family Add-On and On-Board Fast Ethernet Driver (others .kexts give kp and slow download speeds so care)
  • After install of iatkos l2 main system reboot and install all kexts with KextUtility .
  • If you stuck try to boot with : -x -f -v arch=i386
Tick.png Cross.png
G31M-S R2.0 G31 Sleep does not work. Everything else works fine.

System Configuration:

  • Intel Core 2 Quad Q8400
  • Gainward GTX 460 OC 1024MB

onboard video card do not work!!!!!

MultiBeast settings: EasyBeast, System Utilities, VoodooHDA 0.2.1, Chimera 1.5; Tutorial here Tick.png Tick.png
Z68 Extreme 3 Gen 3 Z68 Sleep, shutdown, and reboot all work

System Configuration:

  • Intel Core i5-2500k
  • XFX Ati 4850 1GB
  • Wireless 802.11N Rt2860
  • Stock audio
  • Mouse scroll is backwards by default (can be fixed in the mouse settings)
  • Multibeast 4.1.0, VoodooHDA, Ralink Kext must use arch=1386, chimera 1.6.0, EVOREBOOT for reboot and shutdown Video
  • Must boot iatkos l2 using -v, might sit on saying could not find bootcache. Let it sit for about 5-10 mins, it will come up with the installer.
Tick.png Tick.png
H61M-VS Intel H61 Sleep, Onboard Audio and Integrated Graphics ?. Everything else works fine.

System Configuration:

  • Pentium G620
  • Nvidia 8800GT 512MB
  • E-MU 0202 USB Audio Interface
MyHack 2.0 RC4.1, AtherosL1cEthernet.kext, AppleACPIPS2Nub.kext, ApplePS2Controller.kext Tick.png Tick.png
Wolfdale 1333-d667 R2.0[4] ICH7 System Configuration:
  • Intel Core2Duo @ 1.86 GHz
  • Install Method: iATKOS L1 10.7.1 after update whit combo update lion 10.7.2
  • Audio - VIA VT1708S Works!
  • Ethernet - RTL8111DL Works!
  • Intel® Grafics Media Accelerator 950 whit graphic enabler
  • USB - All Work
  • SATA - All Work use IOATAFamilyfix!
  • IDE - Work
  • E-SATA - Untested
  • Shutdown/Reboot work 100% of the time.
Patches
  • iATKOS L1 10.7.1 distro with special options VoodooHDA 2.0.1 and RTL81XX
  • DVD-ROM & HDD connected to SATA6G_M9128 PCI-Express SATA addon controller and installed flawlesly.
  • After installation download Multibeast and add the internet drivers for Official Realtek 2.0.6 driver for 81xx Ethernet controllers.
  • also if you have a ps/2 board use a numkey for laptop and you resolve the problem at the start that says before begin please connect a mouse that resolve that problem to resolve the problem whit icloud and app store just download the last version of chimera.
Tick.png Tick.png
P67 Pro3 SE Intel P67 Everything works fine.

System Configuration:

  • Intel Core i5 2500K
  • Asus HD 6950 DirectCu 2 1024MB[5]
  • MultiBeast settings: EasyBeast, System Utilities, ALC 8xx, Apple HDA Rollback, HDA Enabler
  • Atheros AR8151[6]
  • Latest Chameleon bootloader[7]
Tick.png Tick.png
P55 Pro/USB3 Intel P55 Sleep is not working, everything other works fine.

System Configuration:

  • Intel Core i5 655K
  • Sapphire AMD HD6670 512MB - works out of the box
  • Audio works Realtek ALC892
  • Ethernet works - RTL8111E
  • Install method - iAtkos L1, after upgrade to 10.7.2
  • MultiBeast settings: Lnx2Mac, alc8xxhda, non dst -&amp;gt; alc892, voodoohda 0.22
Tick.png Tick.png
G41M-VS3 G41, Intel (R) ICH7 SATA Sleep does not work. Everything else works fine.

System Configuration:

  • Intel Core 2 Duo E7500 2.93GHz
  • 4 Gb RAM (2x2Gb DDR3)
  • PCIe Nvidia 9500GT 1Gb - onboard graphics ?
  • 500Gb SATA HDD + 120Gb SATA HDD
  • Audio: VIA VT1705 works with VoodooHDA
  • LAN: Atheros AR8132L works with AtherosL1cEthernet.kext
  • USB: all working
  • SATA: working - IDE ?
  • USB keyboard and USB mouse needed for install, Apple wireless keyboard and trackpad work fine with USB bluetooth adapter
  • TP-Link WirelessN TL-WN851N (with AtherosFix.kext and VendorID added to IO80211Family.kext)
  • OOB Bios Settings work well (Legacy USB can be left ENABLED)
Installation: Retail (Used UniBeast to make bootable installer from 10.7.0 DMG) - Combo update to 10.7.2

MultiBeast settings:

  • EasyBeast
  • System Utilities
  • VoodooHDA
  • MacPro 3,1 System definitions

Use Atheros L1C for Snow Leopard[8] to enable ethernet. Appstore, Facetime and iCloud works fine.

Tick.png Tick.png

[edit] Asus

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Asus Formula Maximus Special Edition Intel® X38+ICH9 Chipset System Configuration:
  • iATKOS L2 DVD
  • 2.67 GHz Quad-Core Intel Core 2 Quad Q9400
  • GPU: GeForce 7600 GT/256M
  • Audio: ASUS/SoundMAX Sound Card (Incl. w/MB)
  • BIOS Version: 1402

Component Status:

  • Network: Works w/ iATKOS Marvell 88E8056
  • SATA: Works w OOB
  • USB 2.0: Works OOB
  • Audio: Works OOB
  • Video: Works OOB
  • RTC: 32 bit Required.
  • SMC Untested
  • "Safe Sleep" Disabled
  • Built-in Audio Not Shown, but Works

Install Method: - iATKOS L2 DVD booted normally.

  • All add-ons required were included on disc.
  • Chimera boot loader
  • NVenabler
  • 32 bit RTC
  • Marvell 88E8056 Network

EthernetBuiltIn=Yes GraphicsEnabler=Yes

Tick.png Cross.png
P5GC-MX Intel 945GC ICH7 System Configuration:
  • Intel E2140 1.60 GHz Pentium Dual-Core
  • GPU: Sapphire ATI Radeon HD 3650 512 MB (Not Working)
  • 2 GB Kingston PC-5300 DDR2-677 MHz SDRAM
  • BIOS Version: 0518

Component Status:

  • USB 2.0 works OOB
  • SATA works OOB
  • Restart & Shutdown works OOB

Install Method: iAtkos L2 DVD (standard installation)

  • On-Board Ethernet works with AtherosL2Ethernet.kext
  • On-Board Audio works with AppleHDA.kext and HDAEnabler.kext

Used PlistEdit Pro to edit org.chameleon.Boot.plist:

  • EthernetBuiltIn=Yes
  • GraphicsEnabler=No
  • npci=0x2000
  • UseKernelCache=Yes
  • Graphics Mode=1280x1024x32
Tick.png Tick.png
Asus P5K Intel® P35 chipset System Configuration:
  • 2.5 GHz Quad-Core Intel Xeon
  • Keyboard: Dell SK-8135
  • Mouse: Logitech M305 Wireless
  • GPU: GeForce 8400 GS 512 MB
  • BIOS Version: 1201

Component Status:

  • Network: Works with AttansicL1Ethernet.kext
  • USB: 2.0 - OOB
  • SATA: Works OOB
  • Audio: Works with VoodooHDA.kext (3.7.3)
  • Restart/Shutdown: Works
  • Display: Dual Dell 2208WP on VGA/DVI
  • Hardware Sensors via latest 'FakeSMCv4_rev530_plugins'
  • Mouse: Scroll Reversed - used 'Scroll Reverser' to fix that
  • Sleep: who uses it...

Install Method:

- iAtkos L2 DVD (would not boot): So extracted pkg's and built a SSD with 10.7.2.Base.pkg and added all the Kext's below

  • Chameleon v2.1VS r1817
  • Kext's Used in S/L/E
  • NVDANV50Hal.kext - Modified with '0x10c310de&0xfff0ffff'
  • ACPIInjector.kext
  • AttansicL1Ethernet.kext - Gigabit Network Card (Built-In)
  • ElliottForceLegacyRTC.kext
  • EvOreboot.kext
  • FintekF718x.kext - Fixed boot msgs regarding 'Fintek F718x chipset found'
  • IntelCPUMonitor.kext
  • JMicron36xATA.kext
  • LegacyAppleYukon2.kext
  • NullCPUPowerManagement.kext
  • NVDAResman.kext - supports NVidia Card for Changing Resolution
  • VoodooHDA.kext - v3.7.3 for on board audio to work
  • EthernetBuiltIn=Yes
  • GraphicsEnabler=Yes
  • Kernel Flags: npci=0x2000 darkwake=0
  • UseKernelCache=Yes
Tick.png Tick.png
Asus P5Q-SE2 Intel® P45 chipset System Configuration:
  • Intel® Core™2 Quad Q9400 @2.66Ghz
  • Keyboard: Genius PS2
  • Mouse: A4TECH X7 - USB
  • GPU: ASUS GTX 560 Ti DirectCU II TOP / 1GD5
  • BIOS Version: P5Q SE2 BIOS 0801
  • Audio: VIA VT1708S 8 Channels HD Audio CODEC
  • Network: Realtek RTL8168C/8111C PCIe Gb LAN
  • Memory: 8 GB DDR2 1066 KINGSTON HYPERX CL5

Component Status:

  • Network: Works
  • USB: 2.0
  • SATA: Works
  • Audio: Works
  • Restart/Shutdown: Works
  • Display: 1680x1050 (32)
  • Sleep: who uses it...

Install Method:

- iAtkos L2 DVD, Selecting:

  • Chameleon v2.1
  • Graphics Enabler
  • Fake SMC
  • Disabler
  • RTC
  • EVO Reboot
  • SATA / IDE
  • AHCI SATA
  • NON AHCI SATA
  • USB
  • NVIDIA GF100
  • Realtek RTL 8111/8168
-v npci=0x2000 

- Installed MultiBeast for Lion (4.5)before rebooting

  • Repair Permissions
  • Disk / 3rdParty eSATA
  • Disk / JMicron 36x ATA
  • NVIDIA 4xx/5xx Support
  • Lnx2Mac's RealtekRTL81xx Ethernet

- After that, I reboot and Install:

Tick.png Tick.png
Maximus IV Extreme-Z Intel (R) Z68 System Configuration:
  • Intel i7-2600K CPU
  • Keyboard: Logitech G15
  • Mouse: Logitech G5
  • GPU: Nvidia GTX 580
  • BIOS Version: 0902

Component Status:

  • Network: Works with Intel KEXT
  • USB: 2.0 - OOB. 3.0 Doesn't work.

USB 3.0 devices in USB 2 ports (and visa versa) work fine, USB 3.0 devices in USB 3.0 ports fail.

  • SATA: Works
  • Audio: Works with ALC8xx KEXT
  • Restart/Shutdown: Works
  • Sleep: Doesn't recover from sleep.

Install Method:

- iAtkos L2 DVD:

  • Chimera
  • Intel E1000 NIC KEXT
  • ALC8xxHDA.kext
  • ALC889 Enabler
  • GTX 5XX Enabler(with cuda) for GPU [9] (ignored PCIRootUID=1 npci=0x2000 requirements)
Tick.png Tick.png
Asus P5E-Deluxe Intel X48 System configuration:
  • Intel Core 2 Quad 9550K
  • Chipset Intel X48
  • ATI Sapphire 4870 Dual-DVI
  • Dual Display
  • Audio (SupremeFX II) works with drivers of iATKOS L2 (Only 2.0; Mic ?)
  • Audio (Logitech H360 Headset) works by default
  • LAN (Marvell88E8056) works with drivers of iATKOS L2
  • Wireless Adapter ASUS WL-138g V2 works by default
Installation method:

- iATKOS L2 selecting:

  • Marvell Yukon 88E8056 kext
  • Voodoo HD Audio 2.2 kext
  • ATY_Init and ATI 48xx (Only to make work the dual monitor, dont have sure if that make the diference)


Working:

  • Shutdown/Reboot
  • Mac App Store
  • iCloud
  • Logitech H360 Headset
  • Dual Monitor

NOT Working:

  • Sleep mode
Tick.png Tick.png
Asus Maximus IV Gene-z Intel Z68 System configuration:
  • Intel Core I7 2600K
  • Chipset Intel Z68
  • Palit 570GTX 1280MB
  • Dual Display
  • Audio Works OB
  • Network Works OB

Installation method:' - iAtkos L2 selecting:

  • Crimera 1.6.1
  • VoodooHDA 2.6.3

Shutdown/Reboot work

  • Mac App Store WORKS!!!
  • iCloud WORKS!!!
  • MUST: Cpu Setting's [10]
  • 570GTX [11]

Updated to 10.7.2 works

Tick.png Tick.png
Asus Maximus IV Gene-z Intel Z68 System configuration:
  • Intel Core I5-2500 (not K)
  • Chipset Intel Z68
  • EVGA GTS 450 1 GB
  • Samsung 830 SSD 128 GB
Installation method:

- iAtkos L2 selecting:

  • Chameleon
  • AHCI SATA and Trim
  • VoodooHDA 2.7.2
  • Hardware Sensors (CPU, MB, NVIDIA)
  • GF100 (open GL patch)
  • Intel Network Driver

Boots like magic! Sleep appears to work!!! You need to set your sound output in pref before speakers work.

Tick.png Tick.png
Asus Maximus IV Gene-z Intel Z68 System configuration:
  • Intel Core I5 2500K
  • Chipset Intel Z68
  • Asus 6870 DC 1GB
  • Single Display
  • Audio Works with kext
  • Network Works with kext
Installation method:

- iAtkos L2 with MyHack chameleon boot only Selected ( + Extra won't work ) leave all at defaults

  • < WORKED BUT WITH FLAWS> Download latest VoodooHDA 2.7.2 and work
  • < UPDATED : WORKING SOUND WITH MIC & SPEAKERS - NO RANDOM KP >
  • Using MultiBeast 4.2.1 for LiON install EasyBeast and ALC8xxxHDA, AppleHDA Rolled Back, ALC889 Enabler ( must be 889, other won't work )
  • After installed it, USB will NOT WORK, must extract IOUSB file from Lion installer package and cp - r IOUSB*.* /Volumes/Your OSX Disk/System/Library/Extensions,
copy to it, since I booting by iATKOS DVD itself, no command required and it just worked ! 

Audio work like a charm now, both Micro and Output works, no kernel panic so far ( if installed only rolled back HDA, ALC, will get insta restart, EASY BEAST is a must for me ).

  • Shutdown/Reboot work
  • Network Card working from Stuffs of this good man : Network [12], or Intel Gigabit network card come along inside MultiBeast package
  • Note : I 'm not using his hacked BIOS and still install well with MyHack Chameleon (boot only) + iATKOS L2.
  • Make PLL Voltages disabled in MainBoard and things should be fine ( got kernel panic if PLL Voltage on sometime )
  • My CPU is i5 2500k and I just leave it X.M.P Mode in AI Tweaker, CPU Auto ( not restrict ratio needed ilke i7 2600K - still working ).
  • 6870 works OOB with full Resolution 1920x1080, QE/CI ( chess played well )
  • Monitor : Asus VS238H monitor


Conclusion : All working after installation with iATKOS L2 + myHack Chameleon, just Audio (Voodoo HDA 2.7.2) and Network (AppleIntelE1000.kext), Mic won't work with current setup, looking around of r fixes ( Fixes found using EasyBeast + ALC889 + HDA rollBack + ALC8xxxHDA ).

Tick.png Tick.png
Asus P5QL Pro Intel P43 System configuration:
  • CPU: Q8300 2.5GHz Intel Core 2 Quad
  • Chipset: Intel P43 ICH10
  • BIOS: v1004
  • Sata works no kext needed, turn on AHCI in BIOS
  • Graphics: Zotac GTX 465 1GB GDDR5 (installed drivers from Multibeast,Graphics Enabler=Yes npci=0x2000)
  • Audio: Realtek ALC1200, Used ALC1200_1063 AppleHDA.kext (from tonymacx86)
  • LAN: Atheros 1LE, Used AttansicL1eEthernet.kext (from tonymacx86)
  • Shutdown and reboot work perfectly
Installation method:

- Retail (Used UniBeast to make bootable installer from 10.7.0 DMG)

  • Installed 10.7.0
  • Installed 10.7.2 Combo update from USB stick
  • Installed MultiBeast for Lion before rebooting
  • Selected 10.7.2 GF100 Driver for Graphics card from MultiBeast before reboot
  • Installed AttansicL1eEthernet.kext and AppleHDA.kext for ALC1200 using Kextbeast before reboot
  • After reboot, went to audio settings to select Line Out

Everything works perfectly if you use AppleHDA.kext for the ALC1200, if you try VoodooHDA, it will kernel panic on boot.

Tick.png Tick.png
Asus P5GC-MX/1333 Intel 945GC / Intel ICH7 System configuration:
  • CPU: Intel Core2duo E4500 (2m Cache, 2.20 Ghz) OC @2.7Ghz
  • Ram: 2 x 1Gb. Supertalent ddr2
  • Chipset: Intel 945GC / Intel ICH7
  • Sata : Works
  • Graphics: XFX Geforce 9500GT 1Gb ddr2 hdmi-dvi-vga : Full works
  • Audio: full work
  • LAN: work
  • Shutdown and reboot work perfectly
Installation method:
  • iAtkos L2 DVD
  • Selected VoodooHDA (last version) for audio
  • Selected NVEnabler for Graphics card
  • Installed AttansicL1eEthernet.kext using Kextbeast before reboot
Tick.png Tick.png
Asus P5SD2-VM SIS 672 + SIS 968 System configuration:
  • CPU: Intel Celeron Dual Core E1400 @ 2Ghz (Stock)
  • Ram: 2 x 1Gb. Crucial DDR2
  • Graphics: GeForce 6200LE
  • WLAN: ASUS WL-167G V3 USB Adaptor (Works w/ official drivers)

Status:

  • SATA : Works OOB
  • PATA ODD: No access to IDE Optical Drive
  • Shutdown and Reboot: Working OOB
  • Audio: Working with VoodooHDA
  • Onboard LAN: Not tested
  • Onboard Video: Not tested
Installation method:
  • BIOS settings were essentially OOB/Stock - very few changes (the general/well documented ones at that!)
  • iAtkos L2 USB Installer (Made using 'dd' on Fedora Linux)
  • Had slight issues with a USB hub whilst attempting to load the installer (these issues did not persist)
  • I had to boot using npci=0x2000 GraphicsEnabler=No the second flag being for my unsupported GFX Card
  • Installed VoodooHDA (last version) from MultiBeast post-install for Audio


I later upgraded this machine to:

  • Intel Celeron Dual Core E3300 @ 2.5Ghz (Stock)
  • 2 x 2GB Crucial DDR2
  • Nvidia GeForce GT520 1GB
  • Sony Optiarc SATA ODD (DVD Multi-Writer)

Has comfortably dual booted with both Linux and Windows 8.

Tick.png Tick.png
Asus P8P67 Intel P67 System configuration:
  • Intel Core I5
  • Chipset Intel P67
  • Asus Radeon 5770 1024MB
  • Audio No Works
  • Network Works with offical driver from realtek.com or MultiBeast
Installation method:

- Any iso from internet, mac lion + MultiBeast:

  • ALC8xxHDA
  • AppleHDA Rollback
  • Non-DSDT HDAEnabler/ ALC892
  • Lnx2Mac's RealtekRTL81xx Ethernet
  • FakeSMC
  • Motherboard Plugins
  • Nvidia Plugin
  • NullCPUPowerManagement

USB3 and build GPU not work for me.

Updated to 10.7.2: all working


Updated Asmedia USB 3.0 for Rev3.1 [http://uk.asus.com/Motherboards/Intel_Socket_1155/Maximus_IV_GENEZGEN3/#download Download and install USB 3.0 Boost Full Package Version V1.00.05]

Tick.png Tick.png
Asus P8H61 Intel H61 System configuration:
  • Intel Core I3 2100
  • Chipset Intel H61
  • ASUS EN210 (GeForce 210) 1GB
  • Monitor: Samsung SyncMaster 1360x768
  • Audio Works
  • Network Works
Installation method:

- iAtkos L2 selecting:

  • Crimera 1.7
  • VoodooHDA
  • Ev0reboot
  • Mac App Store, iCloud, Facetime WORK with EthernetBuiltin in smbios ( I used MacPro3,1)
  • Graphic Enabler
  • Lnx2Mac's RealtekRTL81xx Ethernet
  • Select AHCI and set in Bios AHCI Mode
  • FakeSMC

All working!! Only Sleep seems not work.

Tick.png Tick.png
P8H61-M LX Intel H61 System configuration:
  • Intel Core i5 3,3GHz
  • Nvidia GTX 560 2GB
  • Audio: ALC 667
  • Network: RLT8111E
  • Memory: 8GB Kingston RAM
Installation method:

<key>iGain</key>
<string>0</string>
<key>iMix</key>
<string>70</string>
<key>Mic</key>
<string>70</string>


Works perfectly including Sleep, Audio, Microphone, Mac App Store, FaceTime...
Dual booting with Windows 7.

Tick.png Tick.png
Asus P8P67 LE Intel P67 System configuration:
  • Intel Core i7 2600k OC to 4.4 Ghz
  • Chipset Intel P67
  • Kingston genesis hyperX 1600 Mhz DDR3
  • Motherboard integrated audio works with realtek drivers from multibeast or iAtkos customize
  • Network Works with multibeast realtek driver
  • MSI N550 GTX Ti OC edition
Installation method:

- I used iAtkos L2 DVD

  • ALC8xxHDA
  • AppleHDA Rollback
  • Non-DSDT HDAEnabler/ ALC892
  • Lnx2Mac's RealtekRTL81xx Ethernet
  • FakeSMC
  • Motherboard Plugins
  • Graphics enabler
  • NullCPUPowerManagement
  • Bootloader Chameleon
  • system definition either imac or mac pro


USB3 does not work. do not install USB3 driver from either customize setup or from multibeast. will cause force restart problem screen

Updated to 10.7.2: all working

Tick.png Tick.png
Asus Maximus IV Gene-z Intel Z68 System configuration:
  • Intel Core I7 2600K
  • Chipset Intel Z68
  • Palit 570GTX 1280MB
  • Dual Display
  • Audio Works OB
  • Network Works OB
Installation method:

- iAtkos L2 selecting:

All working

Updated to 10.7.2: all working

Tick.png Tick.png
P5N-E SLI Nvidia Nforce 650i SLI System configuration:
  • Intel Core 2 Duo E4400
  • Chipset Nvidia Nforce 650i SLI
  • JMicron® JMB363 PATA and SATA controller
  • LAN Nvidia Lan
  • Audio Realtek ALC883
  • HIS AMD HD6670
Installation method:

- iAtkos L1 selecting:

  • Chameleon 2.0
  • VoodooHDA 2.6

add manually kexts for Nvidia ATA amp;amp;amp;amp; Nvidia LAN (see verdant post on insanelymac.com) into folder system of installation flash after installation add above kexts into system\library\extention and repair permission after load system by kext utility.

All working!!! Updated to 10.7.2: all working

Tick.png Tick.png
P5K-E/WiFi AP Solo Intel P35/ICH9R System configuration:
  • Intel Core 2 Duo E8400
  • Chipset Intel P35/ICH9R
  • JMicron® JMB363 PATA and SATA controller
  • LAN Marvell88E8056
  • ASUS WiFi-AP Solo 54 Mbps IEEE 802.11g
  • Audio ADI® AD1988B
  • Point Of Wiew nVidia GeForce 8600GT 1024MB
  • 1xInternal card reader and additional Usb ports
Installation method:

- iAtkos L1 selecting:

  • Chameleon 2.0
  • AHCI Intel
  • Jmicron
  • nVenabler
  • VoodooHDA 2.7.2
  • LAN Marvell
  • WiFi RTL81xx

All working!!!

Updated to 10.7.2: all working

Tick.png Tick.png
P5QL-E P43 Configuration
  • Q6600
  • ASUS 4670
  • Audio ALC1200 works (use VoodooHDA_0.2.56.pkg.zip)
  • Atheros AR8121/... works
  • USB 2.0 Works OOB
Patches
  • Easybeast (but don't use audio drivers, install separately)
  • Chimera )
Tick.png Tick.png
P5QL-EM P43 Configuration
  • Q6600
  • ATI Radeon HD 4870
  • USB 2.0 Works OOB
Patches
  • Easybeast
  • Chimera (PCIRootUID=0 -x on boot initially)
  • ATI 48xx
  • Ethernet

Install Method:

Tick.png Tick.png
P5QL-EPU Intel P43 System Configuration:
  • CPU: E7500 @ 2.93 GHZ Intel Core 2 Duo
  • Chipset: Intel P43 ICH10
  • HDD: SATA AHCI (Turn on AHCI on BIOS)
  • Graphics: Point of View nVidia GeForce 9800GT 1024MB DDR3 - NVEnabler
  • Audio: VIA VT1708S - VoodooHDA 2.7.3
  • Lan: Realtek 8111C - Realtek RTL8111/8168
  • Shutdown and Reboot works (sleep seem doesn't working)
Installation:

- iAtkos L2 (with no boot flags)

  • Bootloader: Chameleon 2.1
  • Bootloader Options: Built-in Ethernet
  • Patches: FakeSMC,Disabler,RTC,EvOreboot

Some Issues:

Tick.png Tick.png
P5W DH Deluxe WIFI Intel 975X Intel ICH7R System Configuration:
  • Intel E6400 CPU 2,13 GHz @ Overclocking 2,67 GHz
  • ATI Radeon X1800XT (256MB DDR3 256Bit) works, high performance...
  • Install Method: RETAIL Disk Image...

Components Status:

  • Audio ALC882M Stereo L+R - Line-Out x3 24bit, Line-In x1 20bit, Integrated microphone x1 20bit,

Headphones Integrated x1 24bit, S/PDIF out x1 32bit (+ Info System Profiler)

  • Ethernet - Native Works (Marvell Yukon Gigabit)
  • Wireless RTL8187 b/g - Works
  • USB 2.0 - Native all Work
  • USB 3.0 PCIe - Work SUPER SPEED
  • IDE - Natine all Work
  • E-SATA 3GB - Natine all Work
  • Shutdown/Reboot/Stop - Work...
  • 100% COMPATIBLE
Patches
  • Kext mod. PIEROF81
  • Audio Kext: [14]
Tick.png Tick.png
P5E3 Premium/Wifi-AP Intel X48 - ICH9R SATA
  • Intel Q9550 CPU 2.82 GHz @ 3.4 GHz
  • Corsair Xms3 1600MHz (4x2Gb)
  • ATI HD4870 TOXIC (512MB) - Works with InJector+Patch
  • Audio - Works (bad)
  • Ethernet - Works
  • WiFi - Works likely AirportExtreme
  • USB - Works (all)
  • Shutdown/Reboot - Works
  • Sleep - Not work

Installation method:

  • Client update 10.7.2

Needed:

After Install:

  • Install Update * (DON'T RESTART!)
  • In MultiBeast check EasyBeast - VoodooHDA 2.7.3 - Realtek Gigabit
  • Restart


Patches

Tick.png Tick.png
P6X58D-E X58 Bootloader works tested with 10.7.0 /1 /2 only using USB method users using iAtkos get ready to to way long to boot. LAN Kext (Adapter 88E8056 AppleYukon2.kext found Tick.png Tick.png
P8P67 LE P67 100% Working Just bootloader (Chimera) and audio/LAN kexts. Tick.png Tick.png
P5K Premium/WiFi-AP P35/ICH9R System Configuration:
  • Intel Q9400 CPU 2.66 GHz @ 3.66 GHz
  • 8400GS (256MB) works fully with GraphicsEnabler=y
  • Install Method: Retail Disk Image boot with myHack, then Apple Software Update to 10.7.2

Components Status:

  • Audio Out - ALC888; 3.5mm Headphones works, S-PDIF works, 5.1 surround 3.5mm outputs don't work (sub, r-left etc...).
  • Audio In - ALC888; Line-in works, to use a unpowered mic you need a amp or sound card, this card works.
  • Ethernet - Realtek, RTL8110SC; untested. Marvell, Yukon 88E8056; works, tested @ 100 Mbit/s.
  • Wireless b/g - Works, but shows up as 'Ethernet' not 'AirPort'. (See patch column)
  • USB - All Work
  • SATA - All Work
  • IDE - Untested
  • E-SATA - Untested
  • Shutdown/Reboot work 99% of the time.
Patches
<key>EthernetBuiltIn</key>
<string>Yes</string>

Useful Tools

Tick.png Tick.png
P5KPL-AM/PS Intel (R) G31 ,ICH7 Hardware:
  • Intel Pentium Dual-Core E5400 2.70 GHz
  • WD Cavier Blue 500 GB SATA II Cache 16 MB (No AHCI)
  • Keyboard: MDtech USB Keyboard
  • GPU: inno3d GeForce 9500 GT 1 GB DDR2 (Used HDMI & DVI)
  • BIOS : AMI 0502
  • Monitors : Acer S202HL 1600x900 + PHILIPS 150E 1024x768
  • PSW 500 W
  • Ram Kingston DDR2 800 MHz 2x2 =4 GB

Notes

  • Start with iATKOS L1
  • No DSDT
  • Delete unnecessary,unwant,panic kexts
  • Delete unused LaunchDaemons and LaunchAgents
  • Tweak all things that you can think of
  • Tweak using MacPilot ,TinkerTool
  • Update to Chameleon 2.1svn r1752 from Champlist
  • org.chameleon.Boot.plist = UseKernelCache=Yes ,arch=x86_64 ,EthernelBuiltin=Yes ,USB Bus Fix ,VBIOS=Yes
  • Mac OS X Lion 10.7.2 64 bit
  • smbios.plist -- iMac 11,1 (found the best for pentium dual-core ;) )
  • Boot time : Greatest : 19 seconds
  • GeekBench max scores (64-bit) : 4154 ( NO Overclocking )


Kexts

  • VoodooHDA.kext (Latest) (Fix noise with Vectorize=Yes (Others boolean like this are Enabled) in info.plist in this kext)
  • Fakesmc.kext
  • NullCpuPowerManagement.kext
  • Lnx2mac RTL81xx kext
  • NvEnabler 64.kext with added graphics card id into info.plist
Tick.png Tick.png
Asus P5KPL-AM Intel® G31 Intel ICH7 System configuration:
  • Intel Q6600
  • Chipset Intel G31
  • Asus ENGT440
  • Audio Works OB
  • Realtek RTL8102EL (Driver from realtek.com.tw)
Installation method:

- iAtkos L2 selecting:

  • Chameleon
  • VoodooHDA 2.6.3
  • Shutdown/Reboot work
  • Graphics Enabler
  • Netkas GF100 for Graphics
Tick.png Tick.png
Asus Maximus IV Gene-z Intel Z68 System configuration:
  • Intel Core I5-2500 (not K)
  • Chipset Intel Z68
  • EVGA GTS 450 1 GB
  • Samsung 830 SSD 128 GB
Installation method:

- iAtkos L2 selecting:

  • Chameleon
  • AHCI SATA and Trim
  • VoodooHDA 2.7.2
  • Hardware Sensors (CPU, MB, NVIDIA)
  • GF100 (open GL patch)
  • Intel Network Driver


Boots like magic! Sleep appears to work!!! You need to set your sound output in pref before speakers work.

Tick.png Tick.png
P5KPL-AM/SE Intel (R) G31 Hardware:
  • Intel Core 2 Quad Q8400 2.67 GHz @3.40
  • Seagate Barracuda 500 GB SATA II Cache 32 MB (No AHCI)
  • Keyboard: Apple USB Keyboard (Old G3)
  • GPU: NVidia GeForce 9800 GT 1 GB GDDR3 256bits
  • Dual Display


Install Method:

1. Bootcd HMBT LION DP4 with nvenabler or without nvenabler ([15])

2. BaseSystem with Packages on a external Driver or Pendrive

3. Install kexts on [16] (Portuguese)

4. Very very very Easy

5. Install Chameleon 2 RC5 r1020 HMBT LION and SNOW

6. Thanks for HMBT (Hackintosh Brasilian Team, the bests)

7. 9800T Graphics Enabler (Full, Dual Display, Full Acelaration)

Kexts
  • VoodooHDA.kext (0.5.6.2)
  • Fakesmc.kext
  • RTGMac_v2.0.6
  • NvEnabler 64.kext
  • If you need you can use the package developed by me for layout ABNT2 Layout ABNT2
Tick.png Tick.png
P5KPL-AM EPU P35 + ICH9, BIOS 501 Hardware:
  • Intel Core2Duo E6420 CPU 2.13 GHz
  • XFX GT240 512 mb DDR3 works fully

Notes

  • BIOS: Store Configuration ATA/IDE Enhanced;Enhanced Mode Support:S-ATA; IDE Detect Time: 35
  • Audio - works with VoodooHDA_261_HP_HDX18 (Output and Inputs) edit Info.plist, replace the key IOPCIClassMatch by IOPCIPrimaryMatch and put the PCI ID of your audio card in string. View: [17]
  • Ethernet - Works from pack Atheros AR8121 AR8113AR 8114
  • USB - All Work
  • IDE - Work
  • ICH9R - Works

Install Method:

  • 1.BootCD: BOOTCD.ISO
  • 2.iAtkos L1 from USB
  • 3. Boot with the comand: npci=0x2000
  • Bootloader: CHIMERA v.1.5.4
  • MacOsxUpp Combo 10.7.2
  • Shutdown/Reboot work 99.9% of the time.
  • Mac App Store WORKS!!!
  • iCloud WORKS!!!
Patches
  • Bootloader: Chimera v.1.5.4
  • Graphics Enabler
  • Built-in Ethernet
  • Extra/Extensions
  • FakesMc
  • Disabler
  • EVO Reboot


  • Sound+Ethernet: from download files

Useful Tools

Tick.png Tick.png
Maximus IV Extreme B3 Intel (R) P67 System Configuration:
  • Intel i7-2600K CPU
  • Keyboard: Logitech K800 WirelessUSB (Not fully supported)
  • Mouse: Logitech MX Performance (Full supported with Logitech drivers)
  • GPU: ATI HD6950 x2 (Crossfire does not work, obviously)
  • BIOS Version: 1902

Component Status:

  • Network: Works with Intel KEXT
  • USB: OOB
  • SATA: works
  • Audio: Works using Mutibeast and DSDT.aml
  • Restart/Shutdow: Works without issue


Install Method:

1. Used VMWare with a preinstalled image. Mounted my hard drive into VMWare and installed to physical drive.

Kexts
  • ALC8xxHDA.kext
  • ApplHDA.kext rollback
  • Fakesmc.kext
  • AppleIntelCPUPowerManagement.kext (Patched with SpeedStepper)
  • Intel E1000 NIC KEXT
Tick.png Tick.png
P8Z68 Deluxe Intel (R) z68 System Configuration:
  • Intel i7-2600K CPU
  • Keyboard: chicony ps2 and Delux USB (both fully supported)
  • Mouse: Logitech MX 1000 (Full supported with Logitech drivers)
  • GPU: nVidia GTX 460 (ASUS) 1gb
  • BIOS Version: 0705

Component Status:

  • Network: Works with Intel KEXT
  • Realtek does not work
  • USB: OOB
  • SATA: works eSATA works
  • Audio: works with Multibeast : ALC8xxHDA , AppleHDA Rollback and Non-DSDT HDAEnabler ALC889 ^_^
  • Restart/Shutdow: Works without issue
  • Sleep: Works


Install Method:

1. Clean GM Install, then update. Dual booting with windows 7 UEFI installation without issue! Bootloader latest Chameleon with GraphicsEnabler=Yes and npci=0x2000. (on external thumb drive couse of the efi boot) Sorry for my BAD english

Kexts
  • Fakesmc.kext
  • AppleIntelCPUPowerManagement.kext (Patched with SpeedStepper)
  • AppleIntelE1000e.kext
  • VoodooPS2Controller.kext (for ps2)
  • JMicron36xeSATA.kext (eSATA)
  • Smbios: iMac12.2 (for speedstep to work)
  • Speedstep WORKS
Tick.png Tick.png
Asus P8Z68 Deluxe/gen3 Intel (R) Z68 System Configuration:
  • Intel i7-2700K CPU
  • Keyboard: Comfort Curve Keyboard 2000 v1.0
  • Mouse: Logitech Optical Mouse
  • Video Card: MSI N250GTS TwinFrozr 1G
  • BIOS Version: 3202

Component Status:

  • Network: Intel & RealTec Works, with kexts for Multibeast
  • USB: OOB, but haven't tested Usb 3.0
  • SATA: 3.0 and 6.0 Works, But haven't tested eSata
  • Audio: I use external M-Audio Card Fast Track Pro Works, but have heard with Multibeast kexts, onboard works as well
  • Restart/Shutdow: Works
  • Sleep: Works
  • Bluetooth: Stilling working on it


Install Method:

iAtkos L2 DVD

Kexts
  • Fakesmc.kext
  • AppleIntelCPUPowerManagement.kext (Patched with SpeedStepper)
  • AppleIntelE1000e.kext
  • JMicron36xeSATA.kext (eSATA)
  • Smbios: MacPro 3.1
  • Speedstep Works
Tick.png Tick.png
P7H55D - M EVO INTEL H55 System Configuration:
  • CPU: Intel Core i3
  • GPU: Nvidia 9500GT 1GB(Out of Box)
  • Dual Monitors using VGA and DVI from Single Video Card

Component Status:

All works After using Mac App Store 10.7.1 I was able to use the 10.7.2 ComboUpdate. I've had no issues and I did not need to reapply any patches.

Patches
  • Chimera (from MultiBeast) + arch=x86_64

VoodooHDA from Multibeast. Edit .plist for Voodoo to reduce gain at boot. This patch was done at initial 10.7.1 install.

Tick.png Tick.png
Maximus IV Extreme B3 Intel (R) P67 System Configuration:
  • Intel i7-2600K CPU
  • Keyboard: Razer Anasi (not fully working)
  • Mouse: Razer Naga (full support with drivers)
  • GPU: ATI HD6950
  • BIOS Version: 1902

Component Status:

  • Network: Works with multibeast
  • USB: OOB
  • SATA: works
  • Audio: Works using Mutibeast
  • Restart/Shutdow: Works without issue

Install Method: 1. Used Lion 10.7 GM USB Hack (google it) 2. Copied DMG to Snow Leopard mounted restored to flash drive 3. booted off flash drive and installed 4. boot into snow leopard ran extra lion to install on drive that had lion 5. downloaded Fake SMC put on lion drive 6. used multi beast for lion and installed cpu powermanagment to lion drive 7. boot into lion run multi beast for audio and network reboot 8. ran updates from software update

Pathces
  • Fakesmc.kext (from web)
  • AppleIntelCPUPowerManagement.kext, Audio Voodoo 2.7.3, network
  • Extra lion
Tick.png Tick.png
P5KС Intel (R) P35 Hardware:
  • Intel Core 2Duo E8200 2.66 GHz
  • GPU: ZOTAC 320 mb 8800GTS
  • BIOS : Modified 1203 BIOS with AHCI support

Notes

  • Update BIOS with this: [18]
  • BIOS thread: [19]
  • Chimera bootloader
Kexts
  • AttansicL1.kext
  • Other kexts from iAtkos L1
Tick.png Tick.png
Sabertooth P67 INTEL P67 Hardware:
  • Intel I7 2600k
  • GPU: Nvidia GTX 570
  • Monitors : BenQ
  • BIOS : 2001

Notes For more kexts I found some when unpacked the P8P67 Pro Install Package (the motherboards are basically the same, google the file name). Be careful installing this over iAtkos though, a boot loader failure may happen. Like I said, instead just unpack the installer and install the kexts needed (some for ATI-graphics for example).

Files needed found here

Kexts

Installed with iAtkos L2

Options in installer: - Just the basics - USB 2.0/3.0 - Graphics enabler - Wifi if you got it etc

Additional kexts after install (Installed using Kext Wizard) - Sound: AppleHDA and ALC892HDA51B

- Graphics: Nvdia GTX 570 Installed ATY_Init first with Kext Wizard, then ran GTX Enabler from netkas. Only choose option 1 (I have heard that it is better to install ATY_Init seperately) Also installed the Cuda driver after that.

You may have to repair permissions and rebuild cache if your system fails to boot up again after this. Do this with Kext Wizard.

Tick.png Tick.png
Striker II NSE Nforce790i SLI Kexts used in S/L/E all in verdants v2.3 support files Install them there or you will have issues
  • Ionetworkingfamily.kext modified by me :)
  • AppleNforceAta.slash.kext since I have over 3gb of ram
  • JmicronATA.kext (When I replaced this existing kext it helped my raid become more stable)

Files in Extra

  • Com.apple.boot.plist
  • DSDT.aml upper case for chameleon to read it needs to be modified so you do not lose your bios settings. [20] I used dsdtse to extract, DO NOT USE THE INSTALL DSDT OPTION YOU WILL WRECK YOUR OS!
  • smbios.plist

Files in E/E

  • Openhaltrestart.kext
  • Disabler.kext
  • Fakesmc.kext
  • Platformuuid.kext

My org.chamelon.Boot.plist

  • <key>EthernetBuiltIn</key>
  • <string>Yes</string>
  • <key>GraphicsEnabler</key>
  • <string>Yes</string>
  • <key>Kernel</key>
  • <string>mach_kernel</string>
  • <key>Kernel Flags</key>
  • <string>arch=i386 maxmem=3456 npci=0x2000 darkwake=0</string>
  • <key>Legacy Logo</key>
  • <string>Yes</string>
  • <key>Timeout</key>
  • <string>2</string>
  • Bios revision 0901 you can save your bios setting under tools in your bios :) 32 bit Q6600 CPU @ 2.4 Ghz overclocked in bios to q6800 6gb ram 2 1gig 2 2gig all by ocz
  • Video after snow leopard 10432 which is 10.6.0 is installed use the combo update by apple 10.6.8v1.1

Do not use software update causes issues

  • Sound=Voodoohda.kext works no digital audio yet..airfoil is what I used to get audio to stream to airport express for the time being. Also if using vlc delay audio to -2050. Want to turn your hack into a airplay speaker? [21] autostart? [22] edit org.mafipulation.shairport.plist to change the airplay name before you load into launchctl
  • Video=Nvidia Gtx280 works hdmi full 1080p no audio via hdmi yet
  • Ethernet=Both On board nic's work. Used Netkas support files installed ionetworkingfamily.kext in S/L/E then showed the packages contents and deleted nvenet.kext in plugins then put NforceLan.0.64.5.kext (This improved the stability of the machine immensely and torrent downloads now seem stable!)
  • Ide works OOB
  • Sata works
  • Usb works
  • Esata rocketraid 2302 port1 running a Raid10 enclosure w (4) 1TB 7200 rpm drives, port 2 using a Single HD dock with (1) 500GB 7200rpm both drives work simultaneously Enable plug and play OS in bios use maxmem=3072 as a boot flag if using 4gb of ram or more still useable if you want e-sata support.

AppleNforceATA.slash.kext needs to be updated for raid support see this link [23]

Tick.png Tick.png
Asus P5K-VM Nvidia GeForce 8600 GT 256 MB System Configuration:
  • Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz
  • Chipset Intel G31/G33/G35
  • Lan Marvell Youkon 88E8056 PCI-E Gigabit Ethernet Controller
  • Audio ALC 883

Install Method:

  • iAtkos L2 DVD Downloaded from here: [24]
  • Install on Guid Partition Table, MBR Not Worked.
  • Customize Part: Chameleon 2.1,Graphic Enabler,Non AHCI SATA,JMicron JMB36X IDE,Voodoo HDA 2.2
  • Network: Marvell Youkon 88E8056 kext.
Tick.png Tick.png
P5L-MX Nvidia GeForce 9600 GT System configuration:
  • Intel® Core™2 Duo Processor E4600

(2M Cache, 2.40 GHz, 800 MHz FSB)

  • Chipset Intel® 945G + ICH7
  • LAN Attansic L1
  • Audio Realtek ALC883
Installation method:
  • Update from a fubar Snow Leopard 10.6.8
  • unplugged all unnecessary hardware
  • Retail Install Lion App
  • Mod to install on MBR
  • Instructions to prepare the installation image and additional kexts here used a SATA drive instead of a USB pen drive.
  • Boot with rBoot from tonymacx86
  • Installation (went smoothly)
  • Reboot with rBoot
  • Downloaded 10.7.2 and updated no snags
  • MultiBeast 4.1.0: Lion Edition before reboot.
  • AttansicL1Ethernet.kext
  • Audio kind of working with VoodooHDA.kext (only speakers)
  • Sleep not working.
Tick.png Tick.png
P5Q Deluxe Intel P45 System configuration:
  • Intel Core 2 Duo 3Ghz
  • 2 x 2GB Kingston 800Hz DDR2 RAM
  • Asus Nvidia GTS 250 512Mb
  • SoundBlaster Audigy 2
Installation method:
  • Note: I Used MultiBeast 4.1.0 for the following operations.
  • Fix Ps2 Keyboard Issue:
- From MultiBeast: in Drivers.../Kexts.../Miscellanous, check PS/2 Keyboard/Mouse...
- Open Terminal from install drive (or flash drive install disk)
- Enter: vi Volumes/OSX/System/Library/CoreServices/Setup\ Assistant.app/Contents/Info.plist
- Delete these lines:
<string>DeviceSection</string>
<string>KeyboardTypeSection</string>


  • Sound Blaster Audigy 2
- Install kXAudioDriver-1.11b0 drivers
  • OnBoard audio
- Install VoodooHDA 2.6.3
  • Ethernet (Marvell Yukon 88E8056 PCI-E Gibgabit Ethernet)
- Install IONetworkingFamily.kext (Drag &amp; Drop over kext utility)
- Go in System Preferences/Network; then click ok on warning; then click Apply
  • VideoCard:
- Open MultiBeast in Customization/Boot Options, check: 32-bit Apple Boot Screen and PCI Root ID Fix
- Find and open com.apple.boot.plist, then add/replace the following lines:
<key>Graphics Mode</key>
<string>1920x1200x32</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>-v</string>
  • Bootloader
- Install Chimera 1.6.0
Tick.png Tick.png
Maximus IV Extreme B3 Intel (R) P67 System Configuration:
  • Intel i7-2600K CPU
  • Keyboard: Lenovo Thinkpad USB travel keyboard with trackpad and mouse stick & Apple wireless Bluetooth keyboard
  • Mouse: Logitech G9 game mouse
  • GPU: ATI HD6870
  • BIOS Version: 2105

Component Status:

  • Network: works without issue with Unibeast, but check hnak's AppleIntelE1000e Ethernet driver in Multibeast, else it will be de-installed
  • USB2: works without issue
  • USB3: works without issue with Multibeast (step 5)
  • Bluetooth: works without issue
  • SATA 3GB & 6GB (Intel-ports): works without issue
  • Audio: works without issue with Multibeast (step 5)
  • Restart/Shutdow: Works without any issue

Install Method: Video

1. Format USB key (min. 8GB) with disk utility (use the option Master Boot Record)

2. Put you OSX Lion image in your OSX app folder

3. Run Unibeast (download from [25]) and install it on the USB key

4. Boot from USB and choose install OSX on your disk (format with disk utility the boot disk as Mac OSX extended journaled with option GUID partition table)

5. Run Multibeast (download from [26]) with the following items checked:

- easybeast install

- system utilities => repair permissions

- audio: - Realtek ACL8xxHDA - AppleHDA Rollback - Non-DSDT HDAEnabler - ALC889

- disk: - 3rdParty SATA - 3rdParty eSATA - Trim Enabler

- Miscellaneous: - FakeSMC - FakeSMC Plugins - Mohterboard plugins - AMD Radeon Plugin - USB 3.0 - NEC/Renesas and Etron

- Network: - hnak's AppleIntelE1000E Ethernet

- Bootloaders: - Chimera v1.7.0 r1394

- iMac 12,2

- OSx86 Software: - Kext Utility - ShowAllfiles

Tick.png Tick.png
P8H61-M LX3 PLUS R2.0 Intel® H61(B3) System configuration:
  • CPU: Intel® Pentium® Processor G860 (3.00GHz, 3M Cache)
  • GPU: AMD Radeon™ HD 6670 (1GB DDR3)
  • RAM: Transcend DDR3 1333MHz 4 GB
  • LAN: Realtek® 8111F
  • BIOS version: 0802
Installation method:

Using iAtkos L2 from a flash drive:
1. Formatted the flash drive (8 GB) to Mac OS X Extended (Journaled) [used Master Boot Record]
2. Dragged the iAtkos L2 DMG to Disk Utility, mounted it and restored it to the newly created partition of the flash drive.
3. Ran the Chameleon installer and installed it to the flash drive.
4. Set HDD as AHCI instead of IDE in Advanced Setup in the BIOS (UEFI) and enabled VT-x as well
5. Switched the GPU from PCIe to iGPU (due to the GPU being a Radeon HD 6xxx series)
6. Booted from the flash drive with the -f argument to make it start.
7. Formatted a partition as Mac OS X Extended (Journaled) in Disk Utility and selected the following customizations:
- Bootloader: Chameleon 2.1
- Bootloader options: Graphics Enabler, Built-in Ethernet
- Patches: FakeSMC, Disabler, RTC, EvoReboot, IOPCIFamily (optional)
- Drivers:
SATA/IDE: AHCI SATA, Non-AHCI SATA;
Sound: VoodooHDA 2.2 (will be updated later)
USB: USB
Hardware Sensors: CPU, Motherboard, ATI VGA Cards
Network: Realtek RTL8111/8168B
8. Upon reboot, I accessed the Advanced Setup in BIOS and switched the GPU to PCIe.
9. Started the system without flags (although, you may try -v if it doesn't work the first time)
10. After set-up system everything* fully working.


-Sleep almost working (you just need to press the power on key to wake it up) You also need to get and run the latest VoodooHDA installer and reboot with the -f flag once. Then reboot normally to confirm it working. Note: Go to System Preferences, Sound, Output and switch it to Line-Out (Green Rear) to hear sounds if you're not using digital-out.

Can be updated to 10.7.5 if you run the updater and when it's about to ask you to reboot,
don't do it, but run the 10.7.5 fixer.
When it's done, then press Reboot and it should work just fine.

Tick.png Tick.png

[edit] Biostar

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
TH67+ H67 - BIOS 4.6.4

System Configuration:

  • Intel i5 2400 Sandy Bridge
  • XFX Radeon HD 6850

Notes:

  • Initial install with iAtkos 10.7.2 (L2).
  • MultiBeast settings: EasyBeast, kext for Realtek gigabit ethernet.
  • USB3.0 did not work, Creative X-Fi did not work, could not boot in RAID mode.
  • Had to disable ECHI hand-off support in BIOS and switch to AHCI.
  • Would only support DVI display on boot, HDMI outputs worked fine.

Components Status:

  • Did not test comprehensively. Did not test sleep, on-board video or SATA3. It could successfully run iMovie '11 and Quark Express!
Tick.png Tick.png
G31M+ Intel G31/ICH7

System Configuration:

  • Intel Pentium Dual Core E5800 @ 3.2GHz
  • EVGA GeForce 9500GT 1024MB DDR2
  • Display ViewSonic VA1930wm
  • 4GB RAM DDR2 800Mhz

Install notes:

Components Status:

  • USB works with patch
  • Audio works including front panel and "headphone mute"
  • QE/CI and Dual Monitor works with GraphicsEnabler
  • Sleep works
  • Ethernet works with patch
Tick.png Tick.png

[edit] ECS

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
G31T-M7 Rev 1
  • BIOS version: rev 1
  • Intel Core 2 Duo E4500 2.2GHz
  • NVIDIA 6600 256MB DDR2
  • Audio - Works
  • Video - Works
  • Ethernet - no test ( yukon marvell )built in
  • Ethernet - test( realtek 81039c ) pci card
  • Sleep/Wakeup - Works
  • Shutdown/restart - Works
  • Mac App Store - Works
  • iCloud - no test
Patches:
  • Audio - select all voodoHDA
  • ethernet - install realtek pkg for chipset 8139c
Tick.png Cross.png
GF7050VT-M Nforce 610i/Geforce 7050
  • Intel Pentium E5200 2.5GHZ OC 3.1GHZ
  • ATI Shappire Radeon HD 5570 1GB DDR3
  • Use SATA DVD-RW - IDE DVD-RW won't work (you will get "still waiting for root device" while booting the installer)

Components Status:

  • Mouse - Only works USB Mouse - PS/2 doesn't work (by the moment)
  • Keyboard - Works USB and PS/2
  • Audio - Works VoodooHDA.kext (ver. 0.2.7.3)
  • Video - Works (disabled graphics enabler - selected Atixxx_init)
  • Ethernet - seems to work ( Realtek RTL8201CL ) built in
  • Wireless - Works (D-Link DWA-110 - RT73 chip) - (RT73 Kext + Ralink Wireless Utility: [27])
  • Sleep/Wakeup - ?
  • Shutdown/restart - Works
  • Mac App Store - Works
  • iCloud - no test
Tick.png Cross.png
G41T-M12 (V1.0) ICH7 chipsets
  • Intel Pentium E6300 3.0 GHZ
  • NVidia GForce 9600 GSO 512 MB
  • Use SATA DVD-RW

Components Status:

  • Mouse - Only works USB Mouse - PS/2 doesn't work (by the moment)
  • Keyboard - Works USB and PS/2
  • Audio - Works VoodooHDA.kext (ver. 0.2.7.3)
  • Video - Works (nvenabler )
  • Ethernet - work
  • Wireless - no test
  • Sleep/Wakeup - ?
  • Shutdown/restart - Works
  • Mac App Store - Works
  • iCloud - Works
Tick.png Cross.png

[edit] EVGA

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
EVGA X58 FTW3 Intel x58/ICH10

System Configuration:

  • BIOS version: rev 83
  • Intel Xeon 5620 2.4GHz
  • NVIDIA GTX560 1024MB DDR5 Zogis
  • 12GB RAM DDR3 1333Mhz (show as 1066)

Notes:

  • Install method - Lion.dmg iAtkos L2 10.7.2
  • everything as default just select *IOPCIFamily, AHCI SATA Intel, Jmicron IDE, ALC8xx, ALC892, USB 3.0, Realtek RTL8111/8168
  • Video with 5XXX package from kexts.com follow the instructions editing plist and thats all.

Components Status:

  • Audio - Works
  • Video - Works HDMI Works no audio from hdmi
  • Ethernet - Works
  • Sleep/Wakeup - does not work and altered bios (does not work in windows 7 either)
  • Shutdown/restart - Works
  • Mac App Store - Works
  • iCloud - no test
Tick.png Tick.png
EVGA X58 E758 3-way SLI Intel x58/ICH10

System Configuration:

  • Intel Core i7 920 D0 @ 4.0GHz
  • PNY XLR8 GTX560 Ti OC 1024MB DDR3
  • 6GB RAM DDR3 1600Mhz

Install notes:

  • Install method - iAtkos L2 10.7.2

Keep defaults for everything plus:

  • Bootloader options: PCI Root-1
  • Patches: IOPCIFamily
  • Drivers: AHCI SATA Intel, Jmicron IDE, Realtek RTL8111/8168, NVIDIA GF100
  • Additional bootflags: -cpus=1 -npci=0x2000

Post-install:

  • Drivers: Video with GTX 5xx driver from kexts.com, Audio with Multibeast 4.2.1 (ALC8xx Enabler, AppleHDA Rollback, ALC889), USB WiFi with Realtek 8188SU driver from their website.

Components Status:

  • Audio - Works
  • Video - Works HDMI Works no audio from hdmi
  • Ethernet - Works
  • USB Wifi -- Works using Realtek's 8188SU OS X 10.7.x driver
  • Sleep/Wakeup - Works
  • Shutdown/restart - Works
  • Mac App Store - Works
  • iCloud - no test
IOPCIFamily plus the aforementioned post-install drivers. ? Tick.png

[edit] Foxconn

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
P35A Intel P35/ICH9

System Configuration:

  • BIOS version: 6B3F1P43
  • Intel Core 2 Duo E4500 2.2GHz
  • NVIDIA GTX275 896MB DDR3
  • 4GB RAM DDR2 1066Mhz

Notes:

  • Install method - Lion.dmg restored and installed from 8GB thumb drive
  • Bootloader: Chameleon 2.1 r1666
  • Update to 10.7.2 by using Software Update

Components Status:

  • Audio - Works
  • Video - Works
  • Ethernet - Works OoB
  • Sleep/Wakeup - Works
  • Shutdown/restart - Works
  • Mac App Store - Works
  • iCloud - Works
  • CMOS reset patch
  • Audio - patched AppleHDA
  • Video - using DSDT patch
  • [28] Foxconn P35A tools pack - all-in-one post-installation tool pack designed specifically for this motherboard
Tick.png Tick.png
G41M-S Intel G41/ICH7

Install Method:

  • xMove + Multi-Beast

Notes:

  • Bootloader: Chimera 1.6
  • Update: 10.7.2 Combo Update
  • Video: Intel GMA 4500, no QE/CI only native
  • Multi Beast:
  • Easybeast
  • System Utilities
  • Lnx2Mac
  • Kextbeast
Tick.png Tick.png
P35A-S Intel P35/ICH9R
  • 10.7.2 Combo Update
  • CPU: Intel Core 2 Quad Q6600 @ 2.4GHz
  • Graphics: Palit GeForce 8600GT 1GB
  • RAM: 4GB DDR2 @ 800MHz
  • Audio: Realtek ALC888
  • LAN: Realtek RTL8111B
  • Shutdown/Restart: DSDT
  • Graphics: GraphicsEnabler=Yes
  • Audio: AppleHDA.kext (Rollback 10.6.2), ALC8xxHDA.kext
  • LAN: Realtek RTL81xx.kext
  • Mac App Store: EthernetBuiltIn=Yes
Tick.png Tick.png
G31 Intel G31/G33 series/ICH7R
  • iAtkos L2
  • CPU: Intel Duel Core E2200 @ 2.2GHz(Ditected as Core 2 Duo)
  • Inbuilt (Ditected as 64MB)
  • RAM: 2GB DDR2 @ 667MHz
  • Audio: Not Working(didn't try)
  • LAN: Not working(didn't try)
  • HUAWEI E153 Modem working
  • Shutdown/Restart/sleep/wake:working natively
  • Graphics: GraphicsEnabler=No
  • ps2 driver,usb driver,Disk drivers:yes
  • Cpu Maxval Disabled
  • Floppy disabled
  • IDE 40GB HDD
  • boot with dvd, when unplug the ps2 mouse installer not loaded (first plug ps2 mouse and KB and boot with -v after 15min installer loaded then plug the usb mouse and install 15min install time and everything worked without any trouble).
Tick.png Tick.png

[edit] Gigabyte

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
GA-P55-UD3 Intel P55 Hardware:
  • Intel Core i5 750 CPUs
  • nVidia GTX 260

Notes:

  • Install Method: Install App from AppStore and [29]
  • 10.7.2 installed after first boot
  • MultiBeast installed after combo update
Kexts

MultiBeast 4.1.0

  • EasyBeast install
  • Drivers & Bootloaders
    • Kext & Enablers
      • Disk
        • IOAHCIBlockStorageInjector
        • JMicron 36x ATA
      • Graphics
        • NVIDIA GF100 Fermi Patches
          • OpenCL Enabler 10.7.2
      • Miscellaneous
        • Nearly everything except USB3 and PS/2. Select PS/2 if needed.
      • Network
        • Lnx2Mac's RealtekRTL81xx..
    • Bootloaders
      • Chimera...
  • Customization
    • Boot Options
      • 64-bit Apple Boot Screen
      • PCI Root ID Fix
      • Use KernelCache

Note: Needed to add ncpi=0x2000 to Kernel Flags (/Extra/org.chameleon.Boot.plist) after installing the ComboUpdate. Don't know if it is also used on 10.7.0 and was set by the UniBeast bootloader by default. The install worked without adding any kernel flag. Audio does not work out of the box and not with Drivers & Bootloaders/Kext & Enablers/Audio/Realtek ALC8xx/Non-DSDT HDAEnabler/ALC887-888b. Since I'm using an usb interface, I did ? the others. Someone might add an info to this entry.

Tick.png Tick.png
GA-P55A-UD4 Intel P55 System Configuration:
  • BIOS: F15
  • CPU: Intel Core i5 760
  • GPU: Gigabyte GeForce GTX 460 1Go
  • RAM: 2GB x 4 DDR3 G-Skill (F3-12800CL9D-4GBNQ)
  • HDD: 128GB SSD Kingston Hyper-X
  • Bluetooth: Belkin Bluetooth USB Adapter 100 meter range
  • Keyboard: Apple Wireless Keyboard MC184F
  • Mouse: Apple Magic Mouse


Notes:

Installation method:

MultiBeast 4.2.1

  • User DSDT install Tonymacx86 DSDT Database
  • Drivers & Bootloaders
    • Kext & Enablers
      • Miscellaneous
        • USB3.0 - NEC/Renesas and Etron
      • Network
        • Lnx2Mac's RealtekRTL81xx Ethernet v0.0.90


After install edit org.chameleon.Boot.plist in Extra folder and delete:

  • GraphicsEnabler=Yes

Replace:

  • npci=0x2000 and darkwake=0 by PCIRootUID=0
Tick.png Tick.png
GA-H61M-D2P-B3 Intel H61 Hardware:
  • Intel Core i5 2500k
  • nVidia GeForce 210 (Works OOB)
  • 4GB DDR3 RAM
  • 1TB WD HDD SATA II

Notes:

  • Installed Lion 10.7.2 (App Store + USB Method) with Tonymac's guide Unibeast: Tonymacx86Multibeast
  • Sleep doesn't work. It sleeps but does not wakes up.
  • Some problem with firewire while wake up from sleep mode.
Kexts: Tick.png Tick.png
GA-H61M-S2V-B3 Intel H61 Hardware:
  • Intel Pentium G620
  • Intel HD2000(Integrated)
  • 2GB DDR3 RAM
  • 120GB HDD SATA II

Notes:

  • Installed Lion 10.7.2 via iAtkos L2 Bootdisc
  • Chameleon Bootloader,Chimera didn't work for me
  • I didn't test sleep but reboot/shutdown works fine.
  • NO DSDT OR EASYBEAST(it causes problems)
Kexts:
  • In installation I checked USB2.0,PS/2,non-ahci sata driver,jmicron ide,no graphics enabler,network kext,no audio + pre-checked
  • After installation I deleted graphics kexts ati,intel,nvidia(rm -rf AppleIntelHD*/ATI*/NV*/GeForce*)
  • IntelHD2000 worked with HD3000 kext from here [30] or [31]

and also MacMini5.1 Definition,No OpenGL,no lags,1080p resolution(DVI tested)

  • In multibeast i installed ONLY audio kext
Tick.png Tick.png
GA-PA65-D3-B3 Intel H61 Hardware:
  • Intel Core i7 2600k
  • nVidia GeForce 8500GS with dual display. Dual Display is working.
  • 4GB DDR3 RAM
  • 1.5 TB SEAGATE HDD SATA II two partion HSF+ and exfat. Boot partition is Mac Journaled and Guid partition

Notes:

  • Installed Lion 10.7.2 via Kakewalk Method. Ethernet driver is added Tonymac's Multibeast. Sounds is working. I use coaxıal digital output.
  • Sleep doesn't work. It sleeps but does not wakes up.
Kexts:
  • All drivers from Kakewalk and Multibeast. (ethernet driver only)
Tick.png Tick.png
GA-P31-DS3L Intel P31 ICH7 Hardware:
  • Intel Core2Duo

Notes:

  • Chameleon RC5 Trunk 1730
  • Retail install from 10.7.2 USB install. Everything works perfectly: Speedstep, Ethernet, Sleep, Audio, Graphics
Kexts
  • FakeSMC (IntelCPUMonitor, IntelThermal, SuperIOFamily)
  • AppleHDA [32]
  • ElliottForceLegacyRTC

THE DSDT, org.cham.boot, smbios [33]


Tick.png Tick.png
X58A-UD7 Intel X58A ICH10 Hardware:
  • Intel Core I7 1336
  • ATI Sapphire 5770

Notes:

Kexts Tick.png Tick.png
X58A-UD3R Ver 2.0 bios FF Intel X58A ICH10 Hardware:
  • Intel Core I7 1336
  • ATI Radeon HD 5770 XFX

Notes:

Kexts
  • Binpatched ALC889 AppleHDA
Tick.png Tick.png
GA-EP35-DS3P Intel P35 ICH-9R
  • Kernel: vanilla
  • Sound: Realtek ALC889A
  • Ethernet: RTL8111B
  • USB, Firewire - works OOB
  • Shutdown/Reboot - works OOB
  • Sleep: works with SleepEnabler kext
  • Sound: VoodooHDA [34]
  • Ethernet: Lnx2Mac's RTL81xx Driver [35]
  • DSDT patching (minor)
Tick.png Tick.png
GA-EP45-UD3R rev 1.1 Intel G31/ICH7 System Configuration:
  • Intel Core 2 Quad Q9550 @ 2.83 GHz
  • EVGA GTX 460 1 GB SC GDDR5 1 GB PCI-e Graphics Card
  • On-Board Gigabit Ethernet
  • DWA-556 Xtreme N Wireless PCI-e Card
  • IOGear USB 2.0 Bluetooth 2.1 Adapter
  • HP Webcam 3100
Tick.png Tick.png
GA-EP45-UD3R rev 1.0 Intel P45/ICH10 Bios F11 System Configuration:
  • Intel Core 2 Duo E6400 2.13 GHz @ 3.00 GHz
  • 3x1GB DDR 800 @ 750 (Rare TakeMS CL4 w/heat 4-4-3-10)
  • MSI 8600GTS 512 MB PCI-e Graphics Card
  • On-Board Gigabit Ethernet
  • On-Board Sound ALC889a
  • Install: Used iAtkos L2 with default options (EvoReboot...) + NVEnabler + Lan RTL8111 + Sensors (CPU/NVIDIA)
  • Sound with ALC885_889 didn´t work and installing voodooHDA after setup caused Kernel Panic.
 Solucion: Delete ALC enabler and AppleHDA kext`s (/S/L/E),
 rebuild cache and install latest VoodooHDA with kext wizard.
  • Installed Combo 10.7.3 direct from Apple update without any issues.
  • For bios tweaks, follow Install Guide
Tick.png Tick.png
GA-G31M-ES2L rev 2.4 Intel G31/ICH7 System Configuration:
  • Intel Core 2 Quad Q9550 @ 2.83 GHz
  • EVGA GTX 460 1 GB SC GDDR5 1 GB PCI-e Graphics Card
  • On-Board Gigabit Ethernet
  • DWA-556 Xtreme N Wireless PCI-e Card
  • IOGear USB 2.0 Bluetooth 2.1 Adapter
  • HP Webcam 3100
  • OS X 10.7 Lion GM (MaLd0n's USB Install Guide) + Upgrade to 10.7.1 +10.7.2
  • DSDT Auto-Patcher, Multibeast (UserDSDT), Lnx2Mac RTL Kext, Gigabyte ALC8xx, Reinstall AppleHDA10.6.2.pkg, GraphicsEnabler=Yes, npci=0x2000
  • For all working specs, please visit My Blog
Tick.png Tick.png
GA-G41M-ES2L rev F9 Intel G41/ICH7 System Configuration:
  • Intel Core 2 Duo E7500 @ 2.93 GHz
  • NVIDIA 7300GT 512 GB DDR2 PCI-e Graphics Card
  • 1xCorsair 2 GB DDR2 800 MHz
  • On-Board Gigabit Ethernet
  • On-Board Realtek Audio (ALC8xx)
  • OS X 10.7.2 Lion iAtkos L2 (UPHUCK Install Guide)
  • Lnx2Mac RTL Kext, Gigabyte ALC8xx, GraphicsEnabler=Yes, For 7300GT install drivers from Multibeast 4.2.1 for lion(EasyBeast metod)
  • For easy install, no need set drivers
Tick.png Tick.png
GA-EP45-DS4 rev 1.0 Intel P45/ICH10R System Configuration:
  • on-board mod bios F10b based
  • Intel Core 2 Quad Q9550 @ 2.83 GHz
  • PNY-Nvidia Quadro FX 4600 768mb
  • on-board ALC889a
  • 2X Ethernet Realtek 8111C (only 1 works)
  • on-board 2x Firewire ports (OOTB)
  • USB (OOTB)
  • Audio card : MOTU 828 MK3 Firewire (drivers Motu)

Note:

  • Install method: IatkosL1 + soft.updt
  • using unmod bios you must use a proper dsdt, sleep, reboot, c-state patches
  • Quadro : OOTB with graphics enabler, you can use also last quadro + cuda drivers
Selections:
  • Chimera
  • Graphics Enabler
  • Fakesmc + plugins
  • intel mainboards sensors
  • Smbios MP3,1
  • Intel sata kext
  • Jmicron SATA/IDE (?)
  • Lan Realtek 81xxx
  • Audio ALC885_889a (replace in S/L/E after each updt)
Tick.png Tick.png
GA-Z68X-UD3-B3 Intel Z68/ICH10 Hardware:
  • Intel Core i7 2600k
  • MSI GTX 560 TI Twin Frozr ll

Notes:

Kexts:
  • All drivers from Multibeast
  • For full QE/CI: added dev id to NVDAGF100HAL.kext, installed ATY_init.kext, set GraphicsEnabler to yes, npci=0x2000, followed this guide
  • DSDT from the Tonymacx86 DSDT Database
Tick.png Tick.png
GA-Z68X-UD4-B3 Intel Z68/ICH10 Hardware:
  • Intel Core i7 2600k
  • Gigabyte GTX 560
  • Bluray Burner Lg HL-DT-ST BD-RE BH08LS20

Notes:

  • Installed with Tonymac's guide Unibeast: Tonymacx86Multibeast
  • Sleeping doesn't work well.
  • Some problem with firewire while wake up from sleep mode.
Kexts:
  • All drivers from Multibeast
  • For full QE/CI: added dev id to NVDAGF100HAL.kext, installed ATY_init.kext, followed this guide
  • DSDT from the Tonymacx86 DSDT Database
  • Info set up Boot Raid0 on Lion: it was a bit tricky but I mix-match this two guide Raid 0 Guide (but I didn't downloaded it's files, just used bootloder in Tonymac's multibeast installarer; it's perfectly ok. Then I followed this guide Raid 0 Guide 2 (just followed the command parts no efi reset)
Tick.png Tick.png


GA-EP43-DS3LL Intel P43+ICH10
  • CPU Intel 2.8 GHz Intel Core 2 Duo E7400
  • NVidia Ati HD5670 1024 MB
  • Install Method: iATKOSL2 10.7.2:
  • Updated with 10.7.4 Combo Update
  • All works except Sleep Mode
Tick.png Tick.png
GA-EP41-UD3L Intel G41 / ICH7 Chipset
  • Install method IAtkos L1 DVD
  • CPU: quad core q9550
  • Graphics: NVIDIA 8400gs 256MB Fully recognized with QE/CI working
  • Sound works with alc8xx.kext and hdae888.kext
  • Sleep Mode not working
  • Updated to 10.7.2 via online Software Update
  • used tutorial [36]
? Tick.png
Gigabyte Z68A-D3H-B3 Intel Z68 System configuration:
  • CPU: Intel i7-2600k @ 3.4 GHz
  • Chipset: Intel Z68
  • BIOS: F10
  • Graphics: Zotac GTX 465 1GB GDDR5 (patches from Multibeast,Graphics Enabler=Yes npci=0x2000)
  • Audio: Realtek ALC889, Used ALC8xx Enabler and AppleHDA.kext rollback from 10.6.2
  • LAN: Realtek RTL8111E, Used RTL8111E/RTL8168 from MultiBeast.
  • Shutdown and reboot work perfectly
  • Used custom DSDT from tonymacx86
Installation method:

- Retail (Used UniBeast to make bootable installer from 10.7.0 DMG)

  • Installed 10.7.0 then used Combo update to 10.7.2
  • Installed MultiBeast for Lion with custom DSDT from tonymacx86
  • Selected 10.7.2 GF100 CL Driver for Graphics from MultiBeast
  • Installed ALC8xx Enabler and AppleHDA.kext from 10.6.2 using MultiBeast
  • After reboot, went to audio settings to select Line Out
  • Everything works perfectly, Note: if you try VoodooHDA, it will kernel panic on boot
  • Notes: Make sure to enable HEPT 64 bit and AHCI in BIOS
Tick.png Tick.png
Z68X-UD3H-B3 Z68 Perfect chipset
  • Install method IAtkos L2 DVD or Retail Dvd
  • CPU: I7 2600
  • Graphics: Onboard HD 3000 Fully recognized with QE/CI working
  • Sound works with hdmi audio applehda.kext [37]
  • Sleep Mode doesn't work yet haven't tried to fix it
  • sata works
  • RocketRaid 2302 Raid 10 port multiplier works (4) 1 tb 3.0 gb's 7200 rpm drives
  • While running iatkos L2 or Snow leopard
  • How to create a Lion recovery installer partition at least with my setup this assumes you have snow leopard or lion already installed if not talk to google this will probably work on other boards or USB sticks as well:
  • 1. Format a partition to 6gb or more mac os extended (journaled)
  • 2. Erase that partition if there is any old data it will not work
  • 3. Use xmove to install your 10.7.0 lion app to your partition if it fails mount installESD.dmg and yes it may say a ridiculous time (30min or more) just be patient it will install eventually the timer lies
  • 4. While using lion or snow leopard use multi beast lion edition to install mac pro 3,1 smbios and user dsdt with your DSDT.aml on your desktop I also installed some other options in multi beast such as what gordo74 said on page 1 but not smbios 5,1 it will not work.
  • 5. If you need MBR which I did since I multi boot patch your installer partition with nawcom's mbr patch
  • 6. Reboot and I used these boot flags to get into the installer since I have a quad core cpus=1 -x you can add these to your org.chameleon.boot.plist kernel flags also to make it more seamless
  • Install Lion on you mbr partition
  • Once lion is installed and before you reboot install combo update 10.7.2 after that follow gordo74's guide to install multi beast lion edition now use smbios 5,1 mac mini as it states in gordo74's guide. IF YOU DONT FOLLOW THIS LAST STEP TO A T YOU WILL HAVE MAJOR ISSUES WITH YOUR INSTALL!
  • [38]
  • [39]
  • The key to dsdt on this board is to use smbios for a mac mini
Tick.png Tick.png
GA-EP45T-UD3LR Intel P45/ICH10 Hardware:
  • Intel Socket 775 Q9550 CPUs
  • ATI Saphire 4850

Notes:

  • Install Method: Iatkos L2
  • MultiBeast installed after first boot
Note:

After Multibeast All Works. Graphic Enabled with QE/CI. Combo update to 10.7.3 or 10.7.4 failed for Graphic driver issue.

Tick.png Tick.png
G41M-Combo Intel G41 Chipset Hardware:
  • Intel Core2 Duo 2.8 Ghz
  • RAM: 4GB DDR3
  • GPU: Palit GeForce GT 240 – 1GB DDR3

Install Method:

  • iAtkosL2
Note:
  • Installed iAtkos L2, used all defaults removed graphics enabler and used NVEnabler. Kernel panic sometimes when booting to 64bit. set boot to permanent 32bit.
  • Used AtherosL1cEthernet.kext and RTL8187L for wifi
  • Everything works!
  • install GUIDE here
Tick.png Tick.png

[edit] Intel

Hardware Name Chipset Notes Patches Used 32/64bit working with patches|-
DH61WW H61 PCH Intel® Core i3 2100 @ 3.10GHz - Core i7 2600 3.4Ghz
  • NVIDIA GeForce 210 1GB Graphics Card
  • (Palit GeForce 210 1 GB DDR3 PCI-Express)
  • nVidia® 8400GS 512mb EVGA- Dual Ready - Full Support - Graphics Enabler IATKOS L2
  • Intel® 82579V Gigabit Ethernet Controller
  • Intel® High Definition Audio - Realtek HD Audio ALC892 Codec
  • Installed using iATKOS L1 updated to 10.7.2 using Software Update
  • Used Multibeast for Lion for Chimera Bootloader and UserDSDT Install and other Patches/Drivers
UserDSDT Install
  • ALC 8xx , ALC Rollback, ALC892 Enabler
  • Fake SMC
  • AppleIntelE1000e.kext for Intel 82579V Ethernet to work
  • use GraphicsEnabler=Yes for nVidia
  • Enable AHCI in the BIOS first, before Installation
Tick.png Tick.png
DH67BL H67 Intel® Core i7 2600
  • nVidia® GTX460 - Dual Ready - Full Support
  • (ZOTAC® GTX460 - 768MB)
  • Intel® 82579V Gigabit Ethernet Controller
  • Intel® High Definition Audio - Realtek ALC892
  • USB 3.0 Renasas
  • iBoot + Multibeast 4.1.0 (without DSDT.aml) if problems, use DSDT fixer
UserDSDT Install
  • ALC 8xx , ALC Rollback, ALC892 Enabler
  • Fake SMC
  • NullCPUPowerManagement
  • hank's AppleIntelE1000e Ethernet
  • USB 3.0 Renesas Patch
  • For nVidia - edited AppleGraphicsPowerManagment.kext, edited NVDAGF100Hal.kext (added device id 0e22), Open Cl patched GeforceGl.bundle. to download all the kest and bundle, [40]
  • use GraphicsEnabler=Yes for nVidia
  • Some HDD move than &amp;amp;amp;amp;amp;gt;1TB isnt boot of 4kSector Problems, if it is, install Chameleon in EFI before reboot
  • for kext request - iamdines at gmail . com
Tick.png Tick.png
DG41RQ Intel® G41 Intel® Core E7300
  • MSI nVidia® 9600GT - Dual Ready - Full Support
  • Realtech 81xx controller
  • Intel® High Definition Audio - User Voodoo 2.6.1
  • USB 2.0
  • Used Iatkos L2 if problems, use DSDT fixer

Note: Sleep Not working, Icloud and Apple store issues present

UserDSDT Install
  • Realtech 81xx - for network
  • Voodoo 2.6.1 for audio
  • Fake SMC
  • NullCPUPowerManagement
  • User NV enabler - Yes
  • use GraphicsEnabler=Yes for nVidia
Tick.png Tick.png
DP67DE B3 P67 Intel core i3 2100 ok
  • radeon hd4850 sapphire 512mb - ok dual display
  • network intel 82579v
  • realtek alc892
  • usb 3.0 nec/renesas
  • fw400 - native
  • iBoot 3.1.1 with PCIRootUID=1 -x thanks to user raketa [41]
  • installed with Multibeast 3.8.0 UserDSDT and Dsdt.aml from DSDT fixer
UserDSDT Install
  • DSDT.aml
  • alc8xxhda, alchdaRoolBack and alc892 enabler non-dsdt
  • ati hd48xx injector, ati hd48xx patch 10.6.8
  • usb 3.0 nec/renesas patch
  • hnak´s AppleIntele1000 Ethernet
  • NullCPUPowerManagement.kext
Tick.png
DX58SO X58 Intel core i7 920
  • BIOS 5591
  • XFX AMD HD6870 Black Edition 1024mb 4x Displays
  • Onboard Intel Gigabit
  • Creative X-Fi Fatal1ty PCI-e (Voodoo Audio 2.7.3)
  • iATKOS 10.7.1 L1 + Software Update to 10.7.2
  • installed with Multibeast 3.8.0 UserDSDT and Dsdt.aml from DSDT fixer
UserDSDT Install
  • DSDT.aml
  • USB Fix
  • Voodoo Audio 2.7.3
  • hnak´s AppleIntele1000 Ethernet
  • EvOReboot
  • Intel SATA AHCI
  • Chimera Bootloader
  • System IDs as Late 2008 Mac Pro, Vanilla 64bit install, updates through Software update no issues. 1 Caveat to video, if using HD6870 w/ Active MiniDP to DVI adapters, at login you must unplug and replug them or screen is distorted. Then you log out and in again for wallpaper to display properly on all 4 monitors. After this everything is perfect. Researching solution.
  • Cannot get Audio Input to work on Creative Fatal1ty X-Fi. Using cheap (&amp;amp;amp;amp;amp;lt;) USB sound card for microphone support. My onboard audio is dead, though it is supposedly compatible.
Tick.png Tick.png
D945GCNL Intel D945 ICH7 Intel E6600 Core2 Duo - GMA950 - AHCI Mode SATA
  • Install Method: Retail Disk Image install on Hackintosh or Mac - Mac OS X 10.7 (11A511) - Chameleon 2.0 RC5 r1171
  • GMA950 - Works Dual Display 1920*1200
  • Ethernet - works
  • 10.4 - 10.7 compatible based on development-platform motherboard
  • Software update works from 10.7.0 - 10.7.1 - 10.7.2

Extra

  • DSDT.aml
  • org.chameleon.Boot.plist

S/L/E

  • fakesmc.kext
  • RealtekRTL81xx.kext
  • IONetworkingFamily.kext
Tick.png N
DG33TL G33 Intel Core 2 Quad Q9400
  • BIOS: Latest from Intel
  • EVGA GTS 450 FPB OOB (no audio over HDMI)
  • Onboard Ethernet working OOB
  • Sleep working OOB
  • Retail 10.7.0, upgraded to 10.7.2 flawlessly
  • Installed with Multibeast via Tonymacx86
UserDSDT Install
  • FULL GUIDE HERE: [42]
  • User DSDT (found at link above)
  • Chimera Bootloader
  • System Definition: Mac Pro 3,1
  • On-board Audio not supported, USB audio card purchased
Tick.png Tick.png
DP35DP P35 Express Intel Core 2 Duo E6700
  • BIOS: Latest from Intel
  • XFX Geforce GT 520 OOB
  • RAM DDR2 800Mhz 4GB (PC2-6400)
  • Onboard Ethernet working with Mutibeast 4.2.1
  • Sleep ?
  • Retail 10.7.0, upgraded to 10.7.2 using combo !!NOT FORM SOFTWARE UPDATE!!
  • Installed with Multibeast 4.2.1 via Tonymacx86
EasyBeast Install
  • Chimera Bootloader
  • On-board Audio works with VoodooHDA
  • Select Intel82566MM.kext in MutiBeast for Ethernet
Tick.png Tick.png
DP45SG P45 2.83 GHz Quad-Core Intel Xeon
  • GeForce 8400 GS 256 MB PCI-E high res working
  • RAM 6 GB 1333 MHz DDR3
  • Onboard Intel® 82567LF Gigabit (10/100/1000 Mb/s) Ethernet
  • Onboard IDT 92HD Soundcard with microphone
  • USB fully working
  • Display sleep working, HD / PC not
  • 10.7.2 with iAtkos L2
iAtkos L2 Install
  • Changed BIOS SATA mode to AHCI (very important)
  • Burned iATKOS L2 to DVD, booted, installed, enabled flag USBBusfix=yes on boot after install
  • Graphics enabler on
  • Downloaded kext helper and
  • Installed Intel82566MM.kext (ethernet)
  • Installed VoodooHDA.kext (Voodoo HDA mic version) (sound)
Tick.png Tick.png

[edit] MSI

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
H55M-E33 Intel H55 System Configuration:
  • Intel Core i5-750
  • ASUS GeForce EN210 Silent 512MB
  • Broadcom USB Bluetooth Adapter (0x016a, 0x050d) to connect my Magic Trackpad

Installation: I tried to upgrade my Snow Leopard Installation with tonymac86's guide but i failed.

The Installer-partition was not fully bootable until I copied my SL-/Extra onto it.

Afterwards Installation was possible and i did a fresh install.

Patches via Multibeast 4.0.3:
  • ALC8xxHDA + ALC889 HDAEnabler
  • 3rdParty SATA + eSATA + JMicron36x (not sure if needed)
  • ElliotForceLegacyRTC
  • FakeSMC
  • Lnx2Mac's RealtekRTL81xx
  • Chimera v1.5.4 r1394
  • Kernelflags: npci=0x2000 GraphicsEnabler=yes (for full QE/CI with Asus GeForce EN210 Silent)

Sleep:

  • To fix the CMOS reset after sleep look here
  • To fix reboot after wake make sure you tick the two boxes in energy preferences: automatic restart on power failure and automatic restart on freeze(!)
  • BIOS: Suspend mode S3
  • Also had to disable wake by USB, otherwise Magic Trackpad (or the bluetooth adapter) wakes the system after going to sleep (is there a fix?)
Yes Yes
MSI P35 Neo2 Fi/Fr Intel P35 System Configuration:
  • Intel Core 2 Duo
  • Gigabyte Radeon 5770HD 1024mb

Installation:

  • Download drivers and DSTD from here: [43]
  • Retail (Used UniBeast to make bootable installer from 10.7.0 DMG)
  • Use my DSTD.aml, FakeSMC.kext, NullCPUPowerManagement.kext and whole boot folder to boot system.
'Patches included:
  • ALC Work & Headphones & Digital out
  • 3rdParty SATA + IDE Via Controller works
  • Full temps and cools monitor (CPUS, Pipes, Volts)
  • FakeSMC
  • Sleep (if sleep works on your windows (S3))
  • App store
  • iCloud

Sleep:

  • To fix the CMOS reset after sleep look here
No Yes
67MS-E43(B3) Intel H67 System Configuration:
  • Intel Dual Core G620 2.6 GHz, 3MB Cache (Sandy Bridge)
  • ASUS GeForce GS8400 Silent 512MB

Installation: iATKOS L2

Patches via Multibeast 4.0.3:
  • AppleHDA
  • Lnx2Mac's RealtekRTL81xx
  • Chimera v1.5.4 r1394

Sleep: Everything works out of BOX

Not Sure Yes
MS 7616 Intel H55 System Configuration
  • Intel Core i3 - 530 2.9Ghz, 3MB Cache
  • On Board Graphics

Installation iAtkos L2

Patches via install disc:
  • VoodooHDA
  • Realtek Wired RTL8111
  • Chimera 1.6 (Chameleon also works)

Sleep: Kernal Panic

Yes Not Sure
67MS-E43(B3) Intel H67 System Configuration:
  • Intel Dual Core G620 2.6 GHz, 3MB Cache (Sandy Bridge)
  • ASUS GeForce GS8400 Silent 512MB

Installation: iATKOS L2

Patches via Multibeast 4.0.3:
  • AppleHDA
  • Lnx2Mac's RealtekRTL81xx
  • Chimera v1.5.4 r1394

Sleep: Everything works out of BOX

Not Sure Yes
Z68A-GD80-G3 Z68 System Configuration
  • Intel Core i7 - 2500k (4.5GHz Detected at 3.3Ghz)
  • GTX570
  • 500 Gb Sata II HD

Installation iAtkos L2

'Motherboard Settings
  • SATA: AHCI
  • Virtu: Disable

Patches via install disc:

  • FakeSMC
  • LegacyRTC
  • NullCPUpowerManagement

Multibeast

  • Audio
    • AppleHDRollback
    • Non-DSDT HDAEnabler ALC892
    • ALC8xxHDA
  • System Definitions
    • MacPro 3,1

Network

GFX 570

Yes Yes

[edit] Graphics Cards

Please specify if your card is AGP, Integrated, PCI or PCI-E.
Also, place chip and board manufacturer in their respective column.

[edit] AGP

[edit] NVIDIA

Model Board-Manufacturer Notes QE Output Dual Display 32/64bit
GeForce 6600 GT AGP 128MB (NV43) NVidia Working ONLY in 32bit Mode with Aty_init.kext. The bus type is AGP but System Report as PCIe !!! New ver of ATY_Init 32/64 didt work for me so i use my old ATY_Init.kext i386 only, from my SnowLeopard . Tick.png DVI/VGA ? Tick.png Cross.png

[edit] PCI-E

[edit] AMD/ATI

Model Board-Manufacturer Notes QE Output Dual Display 32/64bit
X1800XT MSI Native Support by PIEROF81… Tick.png 2x DVI Tick.png Tick.png Tick.png
Radeon HD 4350 512MB DDR2 HIS Follow this tutorial Tick.png DVI Tick.png Tick.png Tick.png
Radeon HD 4650 512MB DDR2 XFX Add device id 0x94981002 in ATI4600Controller.kext and ATIRadeonX2000.kext

GraphicsEnabler=Yes

Tick.png DVI ? Tick.png Tick.png
Radeon HD 4850 512MB Sapphire Needed "Legacy4800Controller.kext" in the E/E. Occasional glitches (static on screen for a few seconds) when returning from sleep.GraphicsEnabler=Yes Tick.png DVI Tick.png Tick.png Tick.png
Radeon HD 4870 1Gb Sapphire Native support with iATKOS L2

GraphicsEnabler=Yes Dual Monitor = Works, but I need to change my default monitor to the port DVI 2 and my VGA to DVI monitor to the port DVI 1. I install the drivers ATY_Init and ATI 48xx of the iATKOS L2 but dont have sure if that make the diference.

Tick.png 2X DVI Tick.png Tick.png Tick.png
Radeon HD 4890 2048MB Sapphire works with ATY_Init.kext and with the current QE/CI Enabler package from netkas. set GraphicsEnabler=No Tick.png DVI ? Tick.png Tick.png
HD 5870 1024MB Vapor-X Sapphire OOB Tick.png DVI ? Tick.png Tick.png
HD 5670 VTX install ATI5000Controller.kext to S/L/E WITHOUT adding GraphicsEnabler or ATIConfig to org.chameleon.boot.plist [44] Tick.png VGA/DVI/HDMI Tick.png Tick.png Tick.png
HD 5670 ASUS OOB Tick.png DVI Tick.png Tick.png Tick.png
Radeon HD 5770 Gigabyte Works OOB with GraphicsEnabler=Yes Tick.png 2x DVI/HDMI Tick.png Tick.png Tick.png
RADEON HD 6850 1024MB DDR5 Sapphire OOB (to enable hdmi audio [45], GraphicsEnabler=No (recognized as ATI Radeon HD6xxx) Tick.png 3xDVI/HDMI Tick.png Tick.png Tick.png
HD 6870 Sapphire Sapphire 11179-09-20G HD 6870 1GB GDDR5 Native Support Tick.png VGA/DVI/HDMI Tick.png Tick.png Tick.png
HD 6670 Sapphire Sapphire HD 6670 512MB GDDR5 Native Support Tick.png VGA/DVI/HDMI Tick.png Tick.png Tick.png
HD 6670 Sapphire Sapphire HD 6670 1GB GDDR5 Ultimate

PCIRootUID=0

Tick.png VGA/DVI/HDMI Tick.png Tick.png Tick.png
HD 6770 Sapphire Sapphire HD 6770 1GB GDDR5 Cross.png DVI/HDMI/DisplayPort ? Tick.png Tick.png
HD 6870 XFX Native Support Tick.png VGA/DVI/HDMI Tick.png Tick.png Tick.png
HD 6870 XFX 1GB / 900Mhz / 1050Mhz / Dual Fan Native Support including sound (displayport connected to 27inch Cinema) Tick.png DVI/HDMI/mini-displayport Tick.png Tick.png Tick.png
HD 6870 Sapphire 1GB / 900Mhz / 1050Mhz / Single Fan Native Support including sound Tick.png DVI/DVI/HDMI/DisplayPort Tick.png Tick.png Tick.png
HD 5770 1GB GDDR5 XFX Native Support Tick.png VGA/DVI/HDMI Tick.png Tick.png Tick.png
HD 6950 2048MB/1024MB XFX/Asus/Sapphire Works with Netkas 6970 fix and flashed to 6970 BIOS. UVD does not currently work (iTunes cover flow) Tick.png DVI/VGA/HDMI/DisplayPort Tick.png Tick.png Tick.png
HD 5670 1024MB powercolor OOD,you need to have graphice enabler =Y,and the aticonfig=Vervet [Vervet is case senstive] Tick.png HDMI working in full 1080p didn't test other ports Tick.png Tick.png Tick.png
Radeon HD 4870 XFX Native Support Tick.png DVI Tick.png Tick.png Tick.png
HD 6450 2GB DDR3 Sapphire Works OOB GraphicsEnabler=No (recognized as ATI Radeon HD6xxx) Tick.png VGA/DVI/HDMI ? Tick.png Tick.png
HD 6450 1GB DDR3 Sapphire Works OOB (recognized as ATI Radeon HD6xxx) Tick.png DVI/HDMI (VGA ?) ? Tick.png Tick.png
HD 6670 1GB DDR5 Asus Works OOB (recognized as ATI Radeon HD6xxx) Tick.png HDMI working in full 1080p didn't test other ports ? Tick.png Tick.png

[edit] NVIDIA

Model Board-Manufacturer Notes QE Output Dual display 32/64bit
Geforce Gtx 550 Ti 1gb Nvidia Works with iAtkos L2 10.7.2, then updated through software update to 10.7.3, during installation of iAtkos I selected nvidia enabler Tick.png DVI/DVI Tick.png Tick.png Tick.png
8400 GS 512MB DDR3 Zotac Works OOB with GraphicsEnabler=Yes , see [46] Tick.png 2xDVI/HDMI Tick.png Tick.png Tick.png
7600 GS 256MB Works with IATKOS 10.7.2 select nvidia enabler in install Tick.png DVI/VGA Tick.png Tick.png
8200 GS 512MB ddr2 EVGA Works with GraphicsEnabler for nVidia in IATKOS L2 - Check options GraphicsEnabler for Nvidia before install Tick.png VGA/DVI Tick.png ? Tick.png
8400 GS 256 or 512MB PNY Works with GraphicsEnabler=y Tick.png 2xDVI/mHDMI Tick.png Tick.png Tick.png
8500 GT 256MB Club 3D Works with IATKOS 10.7.2 select nvidia enabler in install Tick.png DVI/VGA ? Tick.png Tick.png
8500 GS 512MB DDR3 ??? Works with Kakewalk Method Tick.png DVI/VGA Tick.png Tick.png Tick.png
ASUS EN8800GTS 512 G92 ASUS works full qe/ci with these [47]. Install the kexts with the program provided.If doesn't work try changing the device id in the info.plist of the kext with your own(you can find it in system profiler) Tick.png 2xDVI Tick.png Tick.png Tick.png
8800 GTS 320MB NVIDIA Works best with GraphicsEnabler=Yes - Tested with OSX 10.7.2 and 10.7.3

May cause problems with Adobe Flash-Player under Safari and Firefox. Follow this topic to get informations about it.

Tick.png 2xDVI Tick.png Tick.png Tick.png
8800 Ultra MSI Works with GraphicsEnabler=y and NVEnabler 64 for full QE/CI, which you can acquire from here [48] Tick.png 2xDVI Tick.png Tick.png Tick.png
9500GT XFX Works OOB with GraphicsEnabler=Yes in com.apple.Boot.plist Inside Extra Folder, DVI works Great (but VGA also Works. Defect is that When You Try To Change Resolution. Display Goes OFF must Restart For Changing Resolution) Tick.png VGA/DVI/HDMI ? Tick.png Tick.png
9500GT XFX 1 Gb. ddr2 HDMI: Works OOB with NVEnabler - All resolutions works - Dual Monitor work - HDMI: work Tick.png VGA/DVI/HDMI Tick.png Tick.png Tick.png
9500GT inno3d 1 GB model with NVEnabler 64.kext for 64-bit OS or NVEnabler.kext for 32-bit OS Tick.png VGA/DVI/HDMI Tick.png Tick.png Tick.png
9600M GS 512MB Works with GraphicsEnabler=yes npci=0x2000 Tick.png HDMI Tick.png Tick.png Tick.png
9600GT 512MB Works with GraphicsEnabler=yes npci=0x2000 Tick.png HDMI Tick.png Tick.png Tick.png
9600GT 512MB MSI GraphicsEnabler=Yes Tick.png DVI/DVI Tick.png Tick.png Tick.png
9800GT 512MB Palit GraphicsEnabler=Yes Tick.png VGA/DVI/HDMI Tick.png Tick.png ?
9800GT 1GB ??? G92 Enabler from iAtkos L1 Tick.png VGA/DVI/HDMI Tick.png Tick.png Tick.png
210 512mb GDDR3 ASUS GraphicsEnabler=Yes npci=0x2000 Tick.png VGA/DVI/HDMI Tick.png Tick.png Tick.png
210 1024MB GDDR2 Galaxy GraphicsEnabler=No, Use OSX86Tools to create a custom EFI String. See [49] for directions. Worked instantly on reboot without causing other issues. Tick.png VGA/DVI/HDMI Tick.png Tick.png Tick.png
EN210 SILENT/DI/512MD2(LP) ASUS GraphicsEnabler=Yes npci=0x2000 Tick.png VGA/DVI/HDMI Tick.png Tick.png Tick.png
Geforce GT 220 1024MB DDR2 (LP) ASUS works with NVEnabler kext Tick.png VGA/DVI ? Tick.png Tick.png
GT240 512MB DDR3 XFX Work with retail. GraphicsEnabler=Yes, PCI Configuration Fix (npci=0x2000. No patches. Work fine in 10.7.1, 10.7.2. Tested on a monitor 22" 1920x1080 full hd Tick.png DVI/VGA/HDMI Tick.png Tick.png Tick.png
GTX275 896MB DDR3 Leadtek All methods working: DSDT patch, EFI string or NVenabler64.kext; Tick.png DVI/DVI/ Tick.png Tick.png Tick.png
GT 430 1 GB Pixelview Followed 3rr0rists guide Tick.png VGA/DVI/DVI/HDMI Tick.png Tick.png Tick.png
GTX 460 1GB Gainward GraphicsEnabler=Yes npci=0x2000 Tick.png DVI ? Tick.png Tick.png
GTX 460 GLH 1024MB Gainward Works with GraphicsEnabler=Yes and PCI Configuration Fix (npci=0x2000) Tick.png VGA/2xDVI/HDMI Tick.png Tick.png Tick.png
GTX 460 SC 1GB EVGA GraphicsEnabler=Yes npci=0x2000 Tick.png DVI/DVI/mHDMI Tick.png Tick.png Tick.png
GTX 465 1GB Zotac Installed GF100 10.7.2 Driver from Multibeast, GraphicsEnabler=Yes npci=0x2000 Tick.png 2xDVI/mHDMI ? Tick.png Tick.png
GTX 470 1280GB Palit Installed OOB don't add anything do not install GF100 leave graphics default using iATKOS 10.7.2 Tick.png HDMI ? Tick.png Tick.png
GTX 480 MSI+ZOTAC Works OOB with iAtkos Lion GraphicsEnabler=Yes npci=0x2000 Tick.png 2xDVI/mHDMI Tick.png Tick.png Tick.png
GTX560 1GB Zogis added device id to NVDAGF100hal. GraphicsEnabler=Yes, npci=0x2000, PCIRootUID=1 in boot.plist, Use GTX5XX Enabler from Kexts.com,

Thats it

Tick.png 2xDVI/mHDMI(no audio) Tick.png Tick.png Tick.png
GTX560 2GB - 336 cores Zotac added device id (1201) to NVDAGF100hal. GraphicsEnabler=Yes, npci=0x2000, PCIRootUID=1 in boot.plist. CUDA drivers installed from Nvidia and work fine with the SDK samples Tick.png 2xDVI / HDMI (audio ?) / Display Port Fullsize (?) Tick.png Tick.png Tick.png
GTX 560 ti 1GB MSI added device id to NVDAGF100hal.kext, installed ATY_init.kext, GraphicsEnabler=Yes, npci=0x2000, followed this guide,

installer here

Tick.png 2xDVI/mHDMI Tick.png Tick.png Tick.png
GTX 560 ti-448 1,28GB Palit added device id 0x108710de&0xffc0ffff to NVDAGF100hal.kext, GraphicsEnabler=Yes, Chameleon rev. 1726 Tick.png 2xDVI/mHDMI Tick.png Tick.png Tick.png
GTX 570 Gainward (Phantom) Installed GTX Enabler.pkg (found here). Also installed the Cuda-driver in the package. Works perfectly :)

Fixed resolution issues and enabled the potential of the card.

Tick.png 2xDVI/mHDMI Tick.png Tick.png Tick.png
GTS 250 512Mb Asus Using MultiBeast, in "Customization"/"Boot Options", check "32-bit Apple Boot Screen" and "PCI Root ID Fix", reboot. If you still have only one resolution, edit "com.apple.boot.plist" file (use Finder to locate it) and add/replace the following lines:
  • <key>GraphicsEnabler</key>
  • <string>Yes</string>
Tick.png DVI ? ? Tick.png
GTX 285 1024Mb Inno3D Works 100% with GraphicsEnabler = Yes Tick.png 2xDVI Tick.png Tick.png Tick.png

[edit] Network Cards

[edit] Wireless

Interface Standard Device Manufacturer Chipset Notes 32/64bit working with patch
PCI b/g WL-138g V2 ASUS Broadcom Works OOB Tick.png Tick.png
PCI b/g/n300 DWA-547 D-Link Atheros Works as native Airport Extreme card. Only need to edit IO80211Family.kext in S/L/E/IO80211Family.kext/Contents/PlugIns/

AirPortAtheros21.kext/Contents/Info.plist/ add: <string>pci168c,29</string>

Cross.png Cross.png
PCI-e n300 DWA-556 D-Link Broadcom Works OOB Tick.png Tick.png
USB b/g/n RTL8191S Realtek Realtek Download drivers Realteck Version 1082 ui VERSION 1.9.7 FOR MODEL RTL8191SU [50] Tick.png Tick.png
USB 802.11 b/g/n IOGEAR GWU625 IOGEAR RTL8191SU Download driver here Cross.png Tick.png
USB b/g/n WL-167G V3 ASUS Realtek RTL8188SU Works with drivers from the ASUS website - located on the ASUS Product Page. Tick.png Tick.png
USB b/g/n TEW-649UB TRENDnet Download 10.6 Installer from [51] Tick.png Tick.png
USB b/g/n TEW-648UB TRENDnet Download 10.6 Installer from [52]

10.6 Installer from Trendnet is unstable under 10.7. The TEW-648UB used a Realtek RTL8188SU chip. Use the 10.7 driver from Realtek [53]. Trendnet simply repackages this driver anyway, but they have failed to included Realteks 10.7 driver in their latest release.

Tick.png Tick.png
USB b/g/n TEW-648UBM TRENDnet Download 10.6 Installer from [54] Tick.png Tick.png
PCI b/g DWL-G520 D-Link Atheros patched IO80211Family.kext Tick.png Tick.png
PCI b/g/n300 TL-WN851N TP-Link Broadcom 32-bit PCI Omni Directional, 2 Detachable Antennas; Works OOB as native Airport Extreme card in all versions of OS X since 10.5. Kernel Panics with Core i5. Tick.png Cross.png
PCI b/g/n300 TL-WN851ND TP-Link Atheros 9287 Detected as "Wi-Fi" in Network settings after installing THIS KEXT, repairing permissions and re-booting. Icon U.png Tick.png
PCI b/g/n TL-WN951N TP-Link Broadcom Works OOB. Kernel Panics with Core i5/i7. Does Not work with i3, detects wireless but then crashes once connected. Tick.png Tick.png
USB b/g DWL-G122 D-Link Ralink Download and Install in S/L/E RT73USBWirelessDriver.kext + install RalinkAirport.app + install RalinkWirelessUtility.prefPane (google) Tick.png Tick.png
USB b/g/n DWA-140 D-Link Ralink Works with Ralink's installer (RT2870) Download here. Tick.png Tick.png
USB b/g/n DWA-DWA125 D-Link Ralink works with Snow Leopard driver on the CD Tick.png Tick.png
USB b/g/n DWA-123 H/W: D1 D-Link Realtek RTL8188ETV Works with driver for TP-Link TL-WN821N v4. Please download from TP-LINK Tick.png Tick.png
PCIE b/g/n150 TL-WN781ND TP-Link Atheros 9285 Works as WI-FI. Only need to edit IO80211Family.kext in S/L/E/IO80211Family.kext/Contents/PlugIns/

AirPortAtheros21.kext/Contents/Info.plist/ add: <string>pci168c,002b</string>, <string>pci168c,30a1</string> or rename Apple80211Monitor.bundle + inject in DSDT method Thread

Tick.png Tick.png
PCIE b/g/n150 TL-WN781N (Lite) TP-Link Atheros 9285 TESTED WORKING on i5, Lion 10.7.2 (11C74), appears as "AirPort Extreme (0x168C, 0x30A1)". Needed kexts: AtherosFix.kext and IO80211Family.kext. Then edit IO80211Family.kext in S/L/E/IO80211Family.kext/Contents/PlugIns/

AirPortAtheros21.kext/Contents/Info.plist/ add: <string>pci168c,002b</string>, <string>pci168c,30a1</string>. Also edited same for AirPortAtheros40.kext, as well as added to plist for AtherosFix.kext. Kext wizard to install. After install, may have to create "WiFi" location in System Prefrences > Network.

Tick.png Tick.png
PCI b/g/n WMP300N Linksys AR5008 Works as Airport device. Bug: Delay on startup until it connects (see [55] [56]). Didn't try workaround with Atheros21.kext from SL. Tick.png Icon U.png
USB b/g/n G9000 Kasens Ralink 3070 Working on a x64 system, used this drivers not the ones that come with the CD. Icon U.png Tick.png

[edit] Wired (Ethernet)

Interface Standard Device Manufacturer Notes 32/64bit working with patch
PCI 1000/100/10 TG-3269 TP-Link Add the missing/removed vanilla S/L/E/IONetworkingFamily.kext/

Contents/Plugins/AppleRTL8169Ethernet.kext, from a 10.6.8 installation, to the same place in the 10.7.1 vanilla IONetworkingFamily.kext. No mods, it just works.

Tick.png Tick.png
OnBoard Gigabyte Realtek 8111E 1000/100/10 Realtek 8111E Realtek Install Realtek Ethernet from MultiBeast. ? Tick.png
OnBoard Realtek 8101E/8102E 10/100 Realtek 8136:10EC Realtek From realtek web. ? Tick.png
PCI 1000/100/10 RTL8169SC REALTEK Add the missing/removed vanilla S/L/E/IONetworkingFamily.kext/

Contents/Plugins/AppleRTL8169Ethernet.kext, from a 10.6.8 installation, to the same place in the 10.7.1 vanilla IONetworkingFamily.kext. No mods, it just works.

Tick.png Tick.png

[edit] Bluetooth Adapters

Interface Hardware Name Manufacturer Notes 32/64bit working with patch
USB Belkin Bluetooth®Adapter 100 metre range. Mac OS® X v10.2 or higher Belkin Plug'n'Play Tick.png Tick.png
USB USBBT100 Linksys Works OOB. Bluetooth networking (PAN) not supported. Tick.png Tick.png
USB UB22S Abe Works OOB. Tick.png Tick.png
USB Bluetooth USB Adapter BA530 Porto Works out of the box. ? Tick.png
USB MacBook Bluetooth Module + USB Connector Apple Get one of these: [57] with antenna as well. Add USB Connector > Black=GND,Yellow=D+,Green=D-,Red=Add 3.3v regulator to +5v. Wake from Sleep + BIOS Work. Tick.png Tick.png

[edit] Sound Cards

[edit] Other Accessories

Interface Hardware Name Manufacturer Notes 32/64bit working with patch
USB Sound Blaster X-Fi Go PRO USB Sound Card Creative Labs Plug'n'Play Tick.png Tick.png
PCI Sound Blaster Audigy 2 Sound Card And Audigy 2 ZS Creative Labs Install kXAudioDriver-1.11b0 drivers Tick.png Tick.png
USB Sound Blaster X-Fi HD Creative Labs Works OOB ? Tick.png
USB C-MEDIA CM-108 USB C-MEDIA No need driver, just plug into the USB and enjoy!

It work 100% ! :)

Tick.png Tick.png
Type of Accessory Item Description Manufacturer Notes 32/64bit working with patch
Logitech H360 Headset USB Headset Logitech Works OOB Tick.png Tick.png
Razer Piranha Headset USB Headset Razer Works OOB Tick.png Tick.png
Vantec UGT-ST420R SATA expansion card (additional SATA connections). RAID capable Vantec Use SONNET TEMPO SATA E2P Driver for the card. Works like a charm. Tick.png Tick.png
Wacom Cintiq 12WX Graphic tablet vga and usb connection Wacom You can use official driver from Wacom web site. Tick.png Tick.png
Logitech C210 1.3 M Effective Pixels WebCam Logitech Web Camera Logitech Works out of the box, but takes 10 seconds to load. Tick.png Tick.png
3Ware 9650SE SATA RAID controller 3Ware / AMCC / LSI Works with official Lion driverset - as of Oct. 2017 found through Broadcom's hardware support site Tick.png Tick.png

This page was last modified on 7 October 2017, at 00:02.
This page has been accessed 1,025,079 times.
Powered by MediaWiki © 2015 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   PHP hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers