HCL 10.7.2
From OSx86
Revision as of 01:44, 20 March 2012 by 92.234.37.140 (Talk)
|
This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.
- ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
- Please add hardware into tables.
- This is for 10.7.2 builds only.
For how to edit the Wiki, please see this thread. Thank you!
You're looking for an Installation guide? see here
Contents |
Motherboards
Abit
| Hardware Name | Chipset | Notes | Patches Used | 32/64bit working with patches | |
|---|---|---|---|---|---|
| i-45cv | i-45cv | sleep not working,shutdown and reboot work, LAN works with Marvell Yukon 88E8056 drivers in iAtkos L2, HDMI Audio works using this guide: [1]. Audio works with custom VoodooHDA kext found here: [2] | Voodoo HDA Patch: [3] | 
|
|
Asrock
| Hardware Name | Chipset | Notes | Patches Used | 32/64bit working with patches | |
|---|---|---|---|---|---|
| G31M-S R2.0 | G31 | Sleep does not work. Everything else works fine.
System Configuration:
onboard video card do not work!!!!! |
MultiBeast settings: EasyBeast, System Utilities, VoodooHDA 0.2.1, Chimera 1.5; Tutorial here |
|
|
| Z68 Extreme 3 Gen 3 | Z68 | Sleep, shutdown, and reboot all work
System Configuration:
|
|
|
|
| H61M-VS | Intel H61 | Sleep, Onboard Audio and Integrated Graphics ?. Everything else works fine.
System Configuration:
|
MyHack 2.0 RC4.1, AtherosL1cEthernet.kext, AppleACPIPS2Nub.kext, ApplePS2Controller.kext |
|
|
| Wolfdale 1333-d667 R2.0[4] | ICH7 | System Configuration:
|
Patches
|
|
|
| P67 Pro3 SE | Intel P67 | Everything works fine.
System Configuration:
|
|
| |
| P55 Pro/USB3 | Intel P55 | Sleep is not working, everything other works fine.
System Configuration:
|
|
|
|
| G41M-VS3 | G41, Intel (R) ICH7 SATA | Sleep does not work. Everything else works fine.
System Configuration:
|
Installation: Retail (Used UniBeast to make bootable installer from 10.7.0 DMG) - Combo update to 10.7.2
MultiBeast settings:
Use Atheros L1C for Snow Leopard[8] to enable ethernet. Appstore, Facetime and iCloud works fine. |
|
|
Asus
| Hardware Name | Chipset | Notes | Patches Used | 32/64bit working with patches | |
|---|---|---|---|---|---|
| Asus Formula Maximus Special Edition | Intel® X38+ICH9 Chipset | System Configuration:
Component Status:
|
Install Method: - iATKOS L2 DVD booted normally.
EthernetBuiltIn=Yes GraphicsEnabler=Yes |
|
|
| Asus P5K | Intel® P35 chipset | System Configuration:
Component Status:
|
Install Method: - iAtkos L2 DVD (would not boot): So extracted pkg's and built a SSD with 10.7.2.Base.pkg and added all the Kext's below
EthernetBuiltIn=Yes GraphicsEnabler=Yes Kernel Flags=npci=0x2000 darkwake=0 UseKernelCache=Yes |
|
|
| Maximus IV Extreme-Z | Intel (R) Z68 | System Configuration:
Component Status:
USB 3.0 devices in USB 2 ports (and visa versa) work fine, USB 3.0 devices in USB 3.0 ports fail.
|
Install Method: - iAtkos L2 DVD:
|
|
|
| Asus P5E-Deluxe | Intel X48 | System configuration:
|
Installation method:
- iATKOS L2 selecting:
Working:
NOT Working:
|
|
|
| Asus Maximus IV Gene-z | Intel Z68 | System configuration:
|
Installation method:
- iAtkos L2 selecting:
Updated to 10.7.2 works |
|
|
| Asus Maximus IV Gene-z | Intel Z68 | System configuration:
|
Installation method:
- iAtkos L2 selecting:
Boots like magic! Sleep appears to work!!! You need to set your sound output in pref before speakers work. |
|
|
| Asus Maximus IV Gene-z | Intel Z68 | System configuration:
|
Installation method:
- iAtkos L2 with MyHack chameleon boot only Selected ( + Extra won't work ) leave all at defaults
Conclusion : All working after installation with iATKOS L2 + myHack Chameleon, just Audio (Voodoo HDA 2.7.2) and Network (AppleIntelE1000.kext), Mic won't work with current setup, looking around of r fixes ( Fixes found using EasyBeast + ALC889 + HDA rollBack + ALC8xxxHDA ). |
|
|
| Asus P5QL Pro | Intel P43 | System configuration:
|
Installation method:
- Retail (Used UniBeast to make bootable installer from 10.7.0 DMG)
|
|
|
| Asus P5GC-MX/1333 | Intel 945GC / Intel ICH7 | System configuration:
|
Installation method:
|
|
|
| Asus P8P67 | Intel P67 | System configuration:
|
Installation method:
- Any iso from internet, mac lion + MultiBeast:
USB3 and build GPU not work for me. Updated to 10.7.2: all working Updated Asmedia USB 3.0 for Rev3.1 Download and install USB 3.0 Boost Full Package Version V1.00.05 |
|
|
| Asus P8H61 | Intel H61 | System configuration:
|
Installation method:
- iAtkos L2 selecting:
All working!! Only Sleep seems not work. |
|
|
| Asus P8P67 LE | Intel P67 | System configuration:
|
Installation method:
- I used iAtkos L2 DVD
USB3 does not work. do not install USB3 driver from either customize setup or from multibeast. will cause force restart problem screen Updated to 10.7.2: all working |
|
|
| Asus Maximus IV Gene-z | Intel Z68 | System configuration:
|
Installation method:
- iAtkos L2 selecting:
All working Updated to 10.7.2: all working |
|
|
| P5N-E SLI | Nvidia Nforce 650i SLI | System configuration:
|
Installation method:
- iAtkos L1 selecting:
add manually kexts for Nvidia ATA amp;amp;amp;amp; Nvidia LAN (see verdant post on insanelymac.com) into folder system of installation flash after installation add above kexts into system\library\extention and repair permission after load system by kext utility. All working!!! Updated to 10.7.2: all working |
|
|
| P5K-E/WiFi AP Solo | Intel P35/ICH9R | System configuration:
|
Installation method:
- iAtkos L1 selecting:
All working!!! Updated to 10.7.2: all working |
|
|
| P5QL-E | P43 | Configuration
|
Patches
|
|
|
| P5QL-EM | P43 | Configuration
|
Patches
Install Method: Unibeast Based |
|
|
| P5W DH Deluxe WIFI | Intel 975X Intel ICH7R | System Configuration:
Components Status:
|
Patches
|
|
|
| P5E3 Premium/Wifi-AP | Intel X48 - ICH9R SATA | Intel Q9550 CPU 2.82 GHz @ 3.4 GHz
Installation method: xMove + MultiBeast
Needed:
After Install:
|
Patches'
|
|
|
| P6X58D-E | X58 | Bootloader works tested with 10.7.0 /1 /2 only using USB method (Unibeast) users using iAtkos get ready to to way long to boot. | LAN Kext (Adapter 88E8056 AppleYukon2.kext found here) and audio Kext ALC889 + applehda rollback using multibeast only selected from Lion Multibeast. |
|
|
| P8P67 LE | P67 | 100% Working | Just bootloader (Chimera) and audio/LAN kexts. |
|
|
| P5K Premium/WiFi-AP | P35/ICH9R | System Configuration:
Components Status:
|
Patches
Useful Tools |
|
|
| P5KPL-AM/PS | Intel (R) G31 ,ICH7 | Hardware:
Notes
|
Kexts
|
|
|
| Asus P5KPL-AM | Intel® G31 Intel ICH7 | System configuration:
|
Installation method:
- iAtkos L2 selecting:
|
|
|
| Asus Maximus IV Gene-z | Intel Z68 | System configuration:
|
Installation method:
- iAtkos L2 selecting:
Boots like magic! Sleep appears to work!!! You need to set your sound output in pref before speakers work. |
|
|
| P5KPL-AM/SE | Intel (R) G31 | Hardware:
Install Method: 1. Bootcd HMBT LION DP4 with nvenabler or without nvenabler ([15]) 2. BaseSystem with Packages on a external Driver or Pendrive 3. Install kexts on [16] (Portuguese) 4. Very very very Easy 5. Install Chameleon 2 RC5 r1020 HMBT LION and SNOW 6. Thanks for HMBT (Hackintosh Brasilian Team, the bests) 7. 9800T Graphics Enabler (Full, Dual Display, Full Acelaration) |
Kexts
|
|
|
| P5KPL-AM EPU | P35 + ICH9, BIOS 501 | Hardware:
Notes
Install Method:
|
Patches
'
Useful Tools
|
|
|
| Maximus IV Extreme B3 | Intel (R) P67 | System Configuration:
Component Status:
Install Method: 1. Used VMWare with a preinstalled image. Mounted my hard drive into VMWare and installed to physical drive. |
Kexts
|
|
|
| P8Z68 Deluxe | Intel (R) z68 | System Configuration:
Component Status:
Install Method: 1. Clean GM Install, then update. Dual booting with windows 7 UEFI installation without issue! Bootloader latest Chameleon with GraphicsEnabler=Yes and npci=0x2000. (on external thumb drive couse of the efi boot) Sorry for my BAD english |
Kexts
|
|
|
| Asus P8Z68 Deluxe/gen3 | Intel (R) Z68 | System Configuration:
Component Status:
Install Method: iAtkos L2 DVD |
Kexts
| ||
| P7H55D - M EVO | INTEL H55 | System Configuration:
Component Status:
After using Mac App Store 10.7.1 I was able to use the 10.7.2 ComboUpdate. I've had no issues and I did not need to reapply any patches. |
Patches
VoodooHDA from Multibeast. Edit .plist for Voodoo to reduce gain at boot. This patch was done at initial 10.7.1 install. |
|
|
| Maximus IV Extreme B3 | Intel (R) P67 | System Configuration:
Component Status:
Install Method: 1. Used Lion 10.7 GM USB Hack (google it) 2. Copied DMG to Snow Leopard mounted restored to flash drive 3. booted off flash drive and installed 4. boot into snow leopard ran extra lion to install on drive that had lion 5. downloaded Fake SMC put on lion drive 6. used multi beast for lion and installed cpu powermanagment to lion drive 7. boot into lion run multi beast for audio and network reboot 8. ran updates from software update |
Pathces
|
|
|
| P5KС | Intel (R) P35 | Hardware:
Notes |
Kexts
|
|
|
| Sabertooth P67 | INTEL P67 | Hardware:
Notes For more kexts I found some when unpacked the P8P67 Pro Install Package (the motherboards are basically the same, google the file name). Be careful installing this over iAtkos though, a boot loader failure may happen. Like I said, instead just unpack the installer and install the kexts needed (some for ATI-graphics for example). Files needed found here |
Kexts
Installed with iAtkos L2 Options in installer: - Just the basics - USB 2.0/3.0 - Graphics enabler - Wifi if you got it etc Additional kexts after install (Installed using Kext Wizard) - Sound: AppleHDA and ALC892HDA51B - Graphics: Nvdia GTX 570 Installed ATY_Init first with Kext Wizard, then ran GTX Enabler from netkas. Only choose option 1 (I have heard that it is better to install ATY_Init seperately) Also installed the Cuda driver after that. You may have to repair permissions and rebuild cache if your system fails to boot up again after this. Do this with Kext Wizard. |
? | ? |
| Striker II NSE | Nforce790i SLI | Kexts used in S/L/E all in verdants v2.3 support files Install them there or you will have issues
Files in Extra
Files in E/E
My org.chamelon.Boot.plist
|
|
|
|
| Asus P5K-VM | Nvidia GeForce 8600 GT 256 MB | System Configuration:
Install Method:
|
|
| |
| P5L-MX | Nvidia GeForce 9600 GT | System configuration:
(2M Cache, 2.40 GHz, 800 MHz FSB)
|
Installation method:
|
|
|
| P5Q Deluxe | Intel P45 | System configuration:
|
Installation method:
|
? |
|
| Maximus IV Extreme B3 | Intel (R) P67 | System Configuration:
Component Status:
|
Install Method: Video 1. Format USB key (min. 8GB) with disk utility (use the option Master Boot Record) 2. Put you OSX Lion image in your OSX app folder 3. Run Unibeast (download from [25]) and install it on the USB key 4. Boot from USB and choose install OSX on your disk (format with disk utility the boot disk as Mac OSX extended journaled with option GUID partition table) 5. Run Multibeast (download from [26]) with the following items checked: - easybeast install - system utilities => repair permissions - audio: - Realtek ACL8xxHDA - AppleHDA Rollback - Non-DSDT HDAEnabler - ALC889 - disk: - 3rdParty SATA - 3rdParty eSATA - Trim Enabler - Miscellaneous: - FakeSMC - FakeSMC Plugins - Mohterboard plugins - AMD Radeon Plugin - USB 3.0 - NEC/Renesas and Etron - Network: - hnak's AppleIntelE1000E Ethernet - Bootloaders: - Chimera v1.7.0 r1394 - iMac 12,2 - OSx86 Software: - Kext Utility - ShowAllfiles |
|
|
Biostar
| Hardware Name | Chipset | Notes | Patches Used | 32/64bit working with patches | |
|---|---|---|---|---|---|
| TH67+ | H67 - BIOS 4.6.4 |
System Configuration:
Notes:
Components Status:
|
|
| |
| G31M+ | Intel G31/ICH7 |
System Configuration:
Install notes:
Components Status:
|
|
| |
ECS
| Hardware Name | Chipset | Notes | Patches Used | 32/64bit working with patches | |
|---|---|---|---|---|---|
| G31T-M7 Rev 1 |
|
Patches:
|
|
| |
| GF7050VT-M | Nforce 610i/Geforce 7050 |
Components Status:
|
|
| |
EVGA
| Hardware Name | Chipset | Notes | Patches Used | 32/64bit working with patches | |
|---|---|---|---|---|---|
| EVGA X58 FTW3 | Intel x58/ICH10 |
System Configuration:
Notes:
Components Status:
|
|
| |
| EVGA X58 E758 3-way SLI | Intel x58/ICH10 |
System Configuration:
Install notes:
Keep defaults for everything plus:
Post-install:
Components Status:
|
IOPCIFamily plus the aforementioned post-install drivers. | ? |
|
Foxconn
| Hardware Name | Chipset | Notes | Patches Used | 32/64bit working with patches | |
|---|---|---|---|---|---|
| P35A | Intel P35/ICH9 |
System Configuration:
Notes:
Components Status:
|
|
|
|
| G41M-S | Intel G41/ICH7 |
Install Method:
Notes:
|
|
|
|
| P35A-S | Intel P35/ICH9R |
|
|
|
|
| G31 | Intel G31/G33 series/ICH7R |
|
|
|
|
Gigabyte
| Hardware Name | Chipset | Notes | Patches Used | 32/64bit working with patches | |
|---|---|---|---|---|---|
| GA-P55-UD3 | Intel P55 | Hardware:
Notes:
|
Kexts
MultiBeast 4.1.0
Note: Needed to add ncpi=0x2000 to Kernel Flags (/Extra/org.chameleon.Boot.plist) after installing the ComboUpdate. Don't know if it is also used on 10.7.0 and was set by the UniBeast bootloader by default. The install worked without adding any kernel flag. Audio does not work out of the box and not with Drivers & Bootloaders/Kext & Enablers/Audio/Realtek ALC8xx/Non-DSDT HDAEnabler/ALC887-888b. Since I'm using an usb interface, I did ? the others. Someone might add an info to this entry. |
|
|
| GA-P55A-UD4 | Intel P55 | System Configuration:
|
Installation method:
MultiBeast 4.2.1
Replace:
|
|
|
| GA-H61M-D2P-B3 | Intel H61 | Hardware:
Notes:
|
Kexts:
|
|
|
| GA-PA65-D3-B3 | Intel H61 | Hardware:
Notes:
|
Kexts:
|
|
|
| GA-P31-DS3L | Intel P31 ICH7 | Hardware:
Notes:
|
Kexts
THE DSDT, org.cham.boot, smbios [31]
|
|
|
| X58A-UD7 | Intel X58A ICH10 | Hardware:
Notes:
|
Kexts
|
|
|
| X58A-UD3R Ver 2.0 bios FF | Intel X58A ICH10 | Hardware:
Notes:
|
Kexts
|
|
|
| GA-EP35-DS3P | Intel P35 ICH-9R |
|
|
| |
| GA-EP45-UD3R rev 1.1 | Intel G31/ICH7 | System Configuration:
|
|
|
|
| GA-EP45-UD3R rev 1.0 | Intel P45/ICH10 Bios F11 | System Configuration:
|
Solucion: Delete ALC enabler and AppleHDA kext`s (/S/L/E), rebuild cache and install latest VoodooHDA with kext wizard.
|
|
|
| GA-G31M-ES2L rev 2.4 | Intel G31/ICH7 | System Configuration:
|
|
|
|
| GA-G41M-ES2L rev F9 | Intel G41/ICH7 | System Configuration:
|
|
|
|
| GA-EP45-DS4 rev 1.0 | Intel P45/ICH10R | System Configuration:
Note:
|
Selections:
|
|
|
| GA-Z68X-UD3-B3 | Intel Z68/ICH10 | Hardware:
Notes:
|
Kexts:
|
|
|
| GA-Z68X-UD4-B3 | Intel Z68/ICH10 | Hardware:
Notes:
|
Kexts:
|
|
|
| GA-EP43-UD3L | Intel P43+ICH10 |
|
|
| |
| GA-EP41-UD3L | Intel G41 / ICH7 Chipset |
|
|
? |
|
| Gigabyte Z68A-D3H-B3 | Intel Z68 | System configuration:
|
Installation method:
- Retail (Used UniBeast to make bootable installer from 10.7.0 DMG)
|
|
|
| Z68X-UD3H-B3 | Z68 Perfect chipset |
|
|
|
|
Intel
| Hardware Name | Chipset | Notes | Patches Used | 32/64bit working with patches|- | |
|---|---|---|---|---|---|
| DH61WW | H61 PCH | Intel® Core i3 2100 @ 3.10GHz
|
UserDSDT Install
|
|
|
| DH67BL | H67 | Intel® Core i7 2600
|
UserDSDT Install
|
|
|
| DG41RQ | Intel® G41 | Intel® Core E7300
Note: Sleep Not working, Icloud and Apple store issues present |
UserDSDT Install
|
|
|
| DP67DE B3 | P67 | Intel core i3 2100 ok
|
UserDSDT Install
|
| |
| DX58SO | X58 | Intel core i7 920
|
UserDSDT Install
|
|
|
| D945GCNL | Intel D945 ICH7 | Intel E6600 Core2 Duo - GMA950 - AHCI Mode SATA
|
Extra
S/L/E
|
|
N |
| DG33TL | G33 | Intel Core 2 Quad Q9400
|
UserDSDT Install
|
|
|
| DP35DP | P35 Express | Intel Core 2 Duo E6700
|
EasyBeast Install
|
|
|
| DP45SG | P45 | 2.83 GHz Quad-Core Intel Xeon
|
iAtkos L2 Install
|
|
|
MSI
| Hardware Name | Chipset | Notes | Patches Used | 32/64bit working with patches | |
|---|---|---|---|---|---|
| H55M-E33 | Intel H55 | System Configuration:
Installation: I tried to upgrade my Snow Leopard Installation with tonymac86's guide but i failed. The Installer-partition was not fully bootable until I copied my SL-/Extra onto it. Afterwards Installation was possible and i did a fresh install. |
Patches via Multibeast 4.0.3:
Sleep:
|
Yes | Yes |
| MSI P35 Neo2 Fi/Fr | Intel P35 | System Configuration:
Installation:
|
'Patches included:
Sleep:
|
No | Yes |
| 67MS-E43(B3) | Intel H67 | System Configuration:
Installation: iATKOS L2 |
Patches via Multibeast 4.0.3:
Sleep: Everything works out of BOX |
Not Sure | Yes |
| MS 7616 | Intel H55 | System Configuration
Installation iAtkos L2 |
Patches via install disc:
Sleep: Kernal Panic |
Yes | Not Sure |
Graphics Cards
Please specify if your card is AGP, Integrated, PCI or PCI-E.
Also, place chip and board manufacturer in their respective column.
PCI-E
AMD/ATI
| Model | Board-Manufacturer | Notes | QE | Output | Dual Display | 32/64bit | |
|---|---|---|---|---|---|---|---|
| X1800XT | MSI | Native Support by PIEROF81… |
|
2x DVI |
|
|
|
| Radeon HD 4350 512MB DDR2 | HIS | Follow this tutorial |
|
DVI |
|
|
|
| Radeon HD 4650 512MB DDR2 | XFX | Add device id 0x94981002 in ATI4600Controller.kext and ATIRadeonX2000.kext
GraphicsEnabler=Yes |
|
DVI | ? |
|
|
| Radeon HD 4850 512MB | Sapphire | Needed "Legacy4800Controller.kext" in the E/E. Occasional glitches (static on screen for a few seconds) when returning from sleep.GraphicsEnabler=Yes |
|
DVI |
|
|
|
| Radeon HD 4870 1Gb | Sapphire | Native support with iATKOS L2
GraphicsEnabler=Yes Dual Monitor = Works, but I need to change my default monitor to the port DVI 2 and my VGA to DVI monitor to the port DVI 1. I install the drivers ATY_Init and ATI 48xx of the iATKOS L2 but dont have sure if that make the diference. |
|
2X DVI |
|
|
|
| Radeon HD 4890 2048MB | Sapphire | works with ATY_Init.kext and with the current QE/CI Enabler package from netkas. set GraphicsEnabler=No |
|
DVI | ? |
|
|
| HD 5870 1024MB Vapor-X | Sapphire | OOB |
|
DVI | ? |
|
|
| HD 5670 | VTX | install ATI5000Controller.kext to S/L/E WITHOUT adding GraphicsEnabler or ATIConfig to org.chameleon.boot.plist [44] |
|
VGA/DVI/HDMI |
|
|
|
| HD 5670 | ASUS | OOB |
|
DVI |
|
|
|
| Radeon HD 5770 | Gigabyte | Works OOB with GraphicsEnabler=Yes |
|
2x DVI/HDMI |
|
|
|
| RADEON HD 6850 1024MB DDR5 | Sapphire | OOB (to enable hdmi audio [45], GraphicsEnabler=No (recognized as ATI Radeon HD6xxx) |
|
3xDVI/HDMI |
|
|
|
| HD 6870 | Sapphire | Sapphire 11179-09-20G HD 6870 1GB GDDR5 Native Support |
|
VGA/DVI/HDMI |
|
|
|
| HD 6670 | Sapphire | Sapphire HD 6670 512MB GDDR5 Native Support |
|
VGA/DVI/HDMI |
|
|
|
| HD 6670 | Sapphire | Sapphire HD 6670 1GB GDDR5 Ultimate
PCIRootUID=0 |
|
VGA/DVI/HDMI |
|
|
|
| HD 6770 | Sapphire | Sapphire HD 6770 1GB GDDR5 |
|
DVI/HDMI/DisplayPort | ? |
|
|
| HD 6870 | XFX | Native Support |
|
VGA/DVI/HDMI |
|
|
|
| HD 6870 | XFX 1GB / 900Mhz / 1050Mhz / Dual Fan | Native Support including sound (displayport connected to 27inch Cinema) |
|
DVI/HDMI/mini-displayport |
|
|
|
| HD 6870 | Sapphire 1GB / 900Mhz / 1050Mhz / Single Fan | Native Support including sound |
|
DVI/DVI/HDMI/DisplayPort |
|
|
|
| HD 5770 1GB GDDR5 | XFX | Native Support |
|
VGA/DVI/HDMI |
|
|
|
| HD 6950 2048MB/1024MB | XFX/Asus/Sapphire | Works with Netkas 6970 fix and flashed to 6970 BIOS. UVD does not currently work (iTunes cover flow) |
|
DVI/VGA/HDMI/DisplayPort |
|
|
|
| HD 5670 1024MB | powercolor | OOD,you need to have graphice enabler =Y,and the aticonfig=Vervet [Vervet is case senstive] |
|
HDMI working in full 1080p didn't test other ports |
|
|
|
| Radeon HD 4870 | XFX | Native Support |
|
DVI |
|
|
|
| HD 6450 2GB DDR3 | Sapphire | Works OOB GraphicsEnabler=No (recognized as ATI Radeon HD6xxx) |
|
VGA/DVI/HDMI | ? |
|
|
| HD 6450 1GB DDR3 | Sapphire | Works OOB (recognized as ATI Radeon HD6xxx) |
|
DVI/HDMI (VGA ?) | ? |
|
|
| HD 6670 1GB DDR5 | Asus | Works OOB (recognized as ATI Radeon HD6xxx) |
|
HDMI working in full 1080p didn't test other ports | ? |
|
|
NVIDIA
| Model | Board-Manufacturer | Notes | QE | Output | Dual display | 32/64bit | |
|---|---|---|---|---|---|---|---|
| 8400 GS 512MB DDR3 | Zotac | Works OOB with GraphicsEnabler=Yes , see [46] |
|
2xDVI/HDMI |
|
|
|
| 7600 GS 256MB | Works with IATKOS 10.7.2 select nvidia enabler in install |
|
DVI/VGA |
|
| ||
| 8400 GS 256 or 512MB | PNY | Works with GraphicsEnabler=y |
|
2xDVI/mHDMI |
|
|
|
| 8500 GS 512MB DDR3 | ??? | Works with Kakewalk Method |
|
DVI/VGA |
|
|
|
| ASUS EN8800GTS 512 G92 | ASUS | works full qe/ci with these [47]. Install the kexts with the program provided.If doesn't work try changing the device id in the info.plist of the kext with your own(you can find it in system profiler) |
|
2xDVI |
|
|
|
| 8800 GTS 320MB | NVIDIA | Works best with GraphicsEnabler=Yes - Tested with OSX 10.7.2 and 10.7.3
May cause problems with Adobe Flash-Player under Safari and Firefox. Follow this topic to get informations about it. |
|
2xDVI |
|
|
|
| 8800 Ultra | MSI | Works with GraphicsEnabler=y and NVEnabler 64 for full QE/CI, which you can acquire from here [48] |
|
2xDVI |
|
|
|
| 9500GT | XFX | Works OOB with GraphicsEnabler=Yes in com.apple.Boot.plist Inside Extra Folder, DVI works Great (but VGA also Works. Defect is that When You Try To Change Resolution. Display Goes OFF must Restart For Changing Resolution) |
|
VGA/DVI/HDMI | ? |
|
|
| 9500GT | XFX | 1 Gb. ddr2 HDMI: Works OOB with NVEnabler - All resolutions works - Dual Monitor work - HDMI: work |
|
VGA/DVI/HDMI |
|
|
|
| 9500GT | inno3d | 1 GB model with NVEnabler 64.kext for 64-bit OS or NVEnabler.kext for 32-bit OS |
|
VGA/DVI/HDMI |
|
|
|
| 9600M GS 512MB | Works with GraphicsEnabler=yes npci=0x2000 |
|
HDMI |
|
|
| |
| 9600GT 512MB | Works with GraphicsEnabler=yes npci=0x2000 |
|
HDMI |
|
|
| |
| 9600GT 512MB | MSI | GraphicsEnabler=Yes |
|
DVI/DVI |
|
|
|
| 9800GT 512MB | Palit | GraphicsEnabler=Yes |
|
VGA/DVI/HDMI |
|
|
? |
| 9800GT 1GB | ??? | G92 Enabler from iAtkos L1 |
|
VGA/DVI/HDMI |
|
|
|
| 210 512mb GDDR3 | ASUS | GraphicsEnabler=Yes npci=0x2000 |
|
VGA/DVI/HDMI |
|
|
|
| 210 1024MB GDDR2 | Galaxy | GraphicsEnabler=No, Use OSX86Tools to create a custom EFI String. See [49] for directions. Worked instantly on reboot without causing other issues. |
|
VGA/DVI/HDMI |
|
|
|
| EN210 SILENT/DI/512MD2(LP) | ASUS | GraphicsEnabler=Yes npci=0x2000 |
|
VGA/DVI/HDMI |
|
|
|
| Geforce GT 220 1024MB DDR2 (LP) | ASUS | works with NVEnabler kext |
|
VGA/DVI | ? |
|
|
| GT240 512MB DDR3 | XFX | Work with retail. GraphicsEnabler=Yes, PCI Configuration Fix (npci=0x2000. No patches. Work fine in 10.7.1, 10.7.2. Tested on a monitor 22" 1920x1080 full hd |
|
DVI/VGA/HDMI |
|
|
|
| GTX275 896MB DDR3 | Leadtek | All methods working: DSDT patch, EFI string or NVenabler64.kext; |
|
DVI/DVI/ |
|
|
|
| GT 430 1 GB | Pixelview | Followed 3rr0rists guide |
|
VGA/DVI/DVI/HDMI |
|
|
|
| GTX 460 1GB | Gainward | GraphicsEnabler=Yes npci=0x2000 |
|
DVI | ? |
|
|
| GTX 460 GLH 1024MB | Gainward | Works with GraphicsEnabler=Yes and PCI Configuration Fix (npci=0x2000) |
|
VGA/2xDVI/HDMI |
|
|
|
| GTX 460 SC 1GB | EVGA | GraphicsEnabler=Yes npci=0x2000 |
|
DVI/DVI/mHDMI |
|
|
|
| GTX 465 1GB | Zotac | Installed GF100 10.7.2 Driver from Multibeast, GraphicsEnabler=Yes npci=0x2000 |
|
2xDVI/mHDMI | ? |
|
|
| GTX 470 1280GB | Palit | Installed OOB don't add anything do not install GF100 leave graphics default using iATKOS 10.7.2 |
|
HDMI | ? |
|
|
| GTX 480 | MSI+ZOTAC | Works OOB with iAtkos Lion GraphicsEnabler=Yes npci=0x2000 |
|
2xDVI/mHDMI |
|
|
|
| GTX560 1GB | Zogis | added device id to NVDAGF100hal. GraphicsEnabler=Yes, npci=0x2000, PCIRootUID=1 in boot.plist, Use GTX5XX Enabler from Kexts.com,
Thats it |
|
2xDVI/mHDMI(no audio) |
|
|
|
| GTX560 2GB - 336 cores | Zotac | added device id (1201) to NVDAGF100hal. GraphicsEnabler=Yes, npci=0x2000, PCIRootUID=1 in boot.plist. CUDA drivers installed from Nvidia and work fine with the SDK samples |
|
2xDVI / HDMI (audio ?) / Display Port Fullsize (?) |
|
|
|
| GTX 560 ti 1GB | MSI | added device id to NVDAGF100hal.kext, installed ATY_init.kext, GraphicsEnabler=Yes, npci=0x2000, followed this guide,
installer here |
|
2xDVI/mHDMI |
|
|
|
| GTX 560 ti-448 1,28GB | Palit | added device id 0x108710de&0xffc0ffff to NVDAGF100hal.kext, GraphicsEnabler=Yes, Chameleon rev. 1726 |
|
2xDVI/mHDMI |
|
|
|
| GTX 570 | Gainward (Phantom) | Installed GTX Enabler.pkg (found here). Also installed the Cuda-driver in the package. Works perfectly :)
Fixed resolution issues and enabled the potential of the card. |
|
2xDVI/mHDMI |
|
|
|
| GTS 250 512Mb | Asus | Using MultiBeast, in "Customization"/"Boot Options", check "32-bit Apple Boot Screen" and "PCI Root ID Fix", reboot. If you still have only one resolution, edit "com.apple.boot.plist" file (use Finder to locate it) and add/replace the following lines:
|
|
DVI | ? | ? |
|
| GTX 285 1024Mb | Inno3D | Works 100% with GraphicsEnabler = Yes |
|
2xDVI |
|
|
|
Network Cards
Wireless
| Interface | Standard | Device | Manufacturer | Chipset | Notes | 32/64bit working with patch | |
|---|---|---|---|---|---|---|---|
| PCI | b/g | WL-138g V2 | ASUS | Broadcom | Works OOB |
|
|
| PCI | b/g/n300 | DWA-547 | D-Link | Atheros | Works as native Airport Extreme card. Only need to edit IO80211Family.kext in S/L/E/IO80211Family.kext/Contents/PlugIns/
AirPortAtheros21.kext/Contents/Info.plist/ add: <string>pci168c,29</string> don't even think about it as it will randomly freeze with all core i series |
|
|
| PCI-e | n300 | DWA-556 | D-Link | Broadcom | Works OOB |
|
|
| USB | b/g/n | TEW-649UB | TRENDnet | Download 10.6 Installer from [50] |
|
| |
| USB | b/g/n | TEW-648UB | TRENDnet | Download 10.6 Installer from [51]
10.6 Installer from Trendnet is unstable under 10.7. The TEW-648UB used a Realtek RTL8188SU chip. Use the 10.7 driver from Realtek [52]. Trendnet simply repackages this driver anyway, but they have failed to included Realteks 10.7 driver in their latest release. |
|
| |
| USB | b/g/n | TEW-648UBM | TRENDnet | Download 10.6 Installer from [53] |
|
| |
| PCI | b/g | DWL-G520 | D-Link | Atheros | patched IO80211Family.kext |
|
|
| PCI | b/g/n300 | TL-WN851N | TP-Link | Broadcom | 32-bit PCI Omni Directional, 2 Detachable Antennas; Works OOB as native Airport Extreme card in all versions of OS X since 10.5. Kernel Panics with Core i5. |
|
|
| PCI | b/g/n300 | TL-WN851ND | TP-Link | Atheros 9287 | Detected as "Wi-Fi" in Network settings after installing THIS KEXT, repairing permissions and re-booting. | 
|
|
| PCI | b/g/n | TL-WN951N | TP-Link | Broadcom | Works OOB. Kernel Panics with Core i5/i7. Does Not work with i3, detects wireless but then crashes once connected. |
|
|
| USB | b/g | DWL-G122 | D-Link | Ralink | Download and Install in S/L/E RT73USBWirelessDriver.kext + install RalinkAirport.app + install RalinkWirelessUtility.prefPane (google) |
|
|
| USB | b/g/n | DWA-140 | D-Link | Ralink | Works with Ralink's installer (RT2870) Download here. |
|
|
| USB | b/g/n | DWA-DWA125 | D-Link | Ralink | works with Snow Leopard driver on the CD |
|
|
| PCIE | b/g/n150 | TL-WN781ND | TP-Link | Atheros 9285 | Works as WI-FI. Only need to edit IO80211Family.kext in S/L/E/IO80211Family.kext/Contents/PlugIns/
AirPortAtheros21.kext/Contents/Info.plist/ add: <string>pci168c,002b</string>, <string>pci168c,30a1</string> or rename Apple80211Monitor.bundle + inject in DSDT method Thread |
|
|
| PCIE | b/g/n150 | TL-WN781N (Lite) | TP-Link | Atheros 9285 | TESTED WORKING on i5, Lion 10.7.2 (11C74), appears as "AirPort Extreme (0x168C, 0x30A1)". Needed kexts: AtherosFix.kext and IO80211Family.kext. Then edit IO80211Family.kext in S/L/E/IO80211Family.kext/Contents/PlugIns/
AirPortAtheros21.kext/Contents/Info.plist/ add: <string>pci168c,002b</string>, <string>pci168c,30a1</string>. Also edited same for AirPortAtheros40.kext, as well as added to plist for AtherosFix.kext. Kext wizard to install. After install, may have to create "WiFi" location in System Prefrences > Network. |
|
|
| PCI | b/g/n | WMP300N | Linksys | AR5008 | Works as Airport device. Bug: Delay on startup until it connects (see [54] [55]). Didn't try workaround with Atheros21.kext from SL. |
|
|
Wired (Ethernet)
| Interface | Standard | Device | Manufacturer | Notes | 32/64bit working with patch | |
|---|---|---|---|---|---|---|
| PCI | 1000/100/10 | TG-3269 | TP-Link | Add the missing/removed vanilla S/L/E/IONetworkingFamily.kext/
Contents/Plugins/AppleRTL8169Ethernet.kext, from a 10.6.8 installation, to the same place in the 10.7.1 vanilla IONetworkingFamily.kext. No mods, it just works. |
|
|
| OnBoard Gigabyte Realtek 8111E | 1000/100/10 | Realtek 8111E | Realtek | Install Realtek Ethernet from MultiBeast. | ? |
|
| OnBoard Realtek 8101E/8102E | 10/100 | Realtek 8136:10EC | Realtek | From realtek web. | ? |
|
Bluetooth Adapters
| Interface | Hardware Name | Manufacturer | Notes | 32/64bit working with patch | |
|---|---|---|---|---|---|
| USB | Belkin Bluetooth®Adapter 100 metre range. Mac OS® X v10.2 or higher | Belkin | Plug'n'Play |
|
|
| USB | USBBT100 | Linksys | Works OOB. Bluetooth networking (PAN) not supported. |
|
|
| USB | UB22S | Abe | Works OOB. |
|
|
| USB | Bluetooth USB Adapter BA530 | Porto | Works out of the box. | ? |
|
| USB | MacBook Bluetooth Module + USB Connector | Apple | Get one of these: [56] with antenna as well. Add USB Connector > Black=GND,Yellow=D+,Green=D-,Red=Add 3.3v regulator to +5v. Wake from Sleep + BIOS Work. |
|
|
Sound Cards
| Interface | Hardware Name | Manufacturer | Notes | 32/64bit working with patch | |
|---|---|---|---|---|---|
| USB | Sound Blaster X-Fi Go PRO USB Sound Card | Creative Labs | Plug'n'Play |
|
|
| PCI | Sound Blaster Audigy 2 Sound Card | Creative Labs | Install kXAudioDriver-1.11b0 drivers | N |
|
| USB | Sound Blaster X-Fi HD | Creative Labs | Works OOB | ? |
|
| Type of Accessory | Item Description | Manufacturer | Notes | 32/64bit working with patch | |
|---|---|---|---|---|---|
| Logitech H360 Headset | USB Headset | Logitech | Works OOB |
|
|
| Razer Piranha Headset | USB Headset | Razer | Works OOB |
|
|
| Vantec UGT-ST420R | SATA expansion card (additional SATA connections). RAID capable | Vantec | Use SONNET TEMPO SATA E2P Driver for the card. Works like a charm. |
|
|
| Wacom Cintiq 12WX | Graphic tablet vga and usb connection | Wacom | You can use official driver from Wacom web site. |
|
|
| Logitech C210 1.3 M Effective Pixels WebCam | Logitech Web Camera | Logitech | Works out of the box, but takes 10 seconds to load. |
|
|
![[56]](http://www.thebookyard.com/images/MB08BTBRD.jpg){kind=link}