HCL 10.7.4

From OSx86
Revision as of 10:35, 16 August 2012 by 95.67.218.146 (Talk)

Jump to: navigation, search
OS X 10.7.4
Hardware Compatibility

This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for 10.7.4 builds only.

For how to edit the Wiki, please see this thread. Thank you!

You're looking for an Installation guide? see here

Contents

Motherboards

Abit

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Abit IP35 Intel P35 System configuration:
  • Intel Core 2 Quad Q6600
  • Chipset Intel P35
  • AMD Radeon HD4870 (GraphicsEnabler)
  • Audio ALC888 (DSDT mod + Binpatch AppleHDA)
  • PCI-e Network Card RTL8111C (Lnx2Mac)
Installation method:
  • Retail Lion 10.7
  • Combo Update to 10.7.4
  • Add DSDT, FakeSMC, Binpatch AppleHDA, Newest Chameleon

Working:

  • Shutdown/Reboot
  • Mac App Store
  • iCloud
  • Both DVI ports.

NOT Working:

  • Doesn't wake up from sleep mode
Tick.png Tick.png

ASRock

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
ASRock Z68m/USB3 Intel Z68m System configuration: Installation method:
  • 10.7.2 InstallESD + myhack
  • Combo Update to 10.7.4
  • Note: Set storage to AHCI

Working:

  • Shutdown/Reboot
  • Mac App Store (edited boot.chameleon.plist with EthernetBuiltIn=Yes)
  • iCloud
  • Both DVI ports.
ASRock Fatality Z68 Professional Intel Z68 System configuration:
  • Intel Core i5 2600k
  • Chipset Intel Z68
  • 16GB Corsair Vengeance DDR3@ 1600mhz / 4 X 4GB
  • NVidia GTX 570 (EVGA GTX 570 SC)
  • Audio ALC8xx (MultiBeast Realtek)
  • PCI-e Network Card (RealtekRTL81xx.kext)
Installation method:
  • iATKOS 10.7.3
  • Combo Update to 10.7.4
  • MultiBeast EasyBeast Install
  • MultiBeast Audio (Realtek ALC8xx)
  • MultiBeast Graphics (NVidia 4xx/5xx Support: 10.7.2+Combo) /
  • NVidia Hermes Driver 270.00 Download (nvidia.com)
  • NVidia Cuda Driver 4.2.7 Download (nvidia.com)
  • Note: Set bios to default, Set storage to AHCI, unhooked all USB devices except keyboard & mouse.
  • (Did not remove any ram or NVidia GPU for installation)

Working:

  • Shutdown/Reboot
  • Mac App Store
  • iCloud
  • Both DVI ports.

NOT Working:

  • Doesn't wake up from sleep mode


AsRock H61M-VS Intel H61 System configuration:
  • Intel Core i3-2100
  • 4GB TakeMS 1333MHz DDR3 RAM
  • 500 Seagate Barracuda HDD (in BIOS seted to AHCI mode)
  • Palit Nvidia GT440
  • Audio: VIA HD (work with VoodooHDA.kext from IATKOS L2 DVD)
  • Network: Artheros
  • USB Keyboard and Mouse
Installation method:
  • Install iATKOS L2 (with VoodooHDA.kext, AHCI.kext, NV100.kext, USB.kext and PS2.kext)
  • Change SMBIOS to Macbook Pro 8.3 (or something else, but I choose this) to enable iCloud
  • Install AtherosL1cEthernet.kext with Kext Utility)
  • Update with 10.7.3 and 10.7.4 Combo Updates

Working:

  • Audio OUT (on MBO)
  • Audio IN (on MBO)
  • Network

Not Working:

  • Sleep
  • Hibernation
AsRock G41M-VS3 H61 System configuration:
  • Intel C2Q 83000
  • 4GB Corsair DDR3 1333 RAM (if added another 4gb = installation failed and after installed successfull it'll always kernel panic after running in couples of minutes)
  • 1TB Seagate Barracuda HDD
  • Nvidia GT 210 1gb DDR3 Silent
  • Audio VT1705 (multibeast VoodooHDA 2.1)
  • Ethernet Atheros (multibeast maolj's ethernetL1cEthernet)
  • Asus N10-USB wireless
Installation method:
  • boot with rBoot for lion (chimera 1.9.1)
  • Retail 10.7.0 restored to another partition/hdd
  • multibeast 4.5.2 EasyBeast Install, IOUSBFamily Roolback, maolj's AtherosL1cEthernet
  • boot from HDD, if GPT error.. install chimera 1.9.2 from another working OSX. i have to boot with chimera 1.9.2 to get VideoCard (GT 210) to work fine with QE/CI
  • update to 10.7.4 with combo client update
  • install kext for audio (VT1705) with multibeast and choose VoodooHDA 2.1, i read from some forum to choose 2.2 but it didnt work for me.. 2.1 did.
  • wireless with asus usb-n10 working by installing official driver from asus website, or use this RTL8192SU_MacOS10.6_1079.zip more stable and advanced than asus's official
  • Mac App Store and iCloud working by following this article http://www.osxlatitude.com/how-to-fix-icloud-appstore-facetime/2/


Working:

  • Shutdown/Reboot
  • Mac App Store
  • iCloud
  • DVI, VGA and HDMI (connected to HD TV 1080)

NOT Working:

  • Doesn't wake up from sleep mode
Tick.png Tick.png
AsRock G41C-GS G41/ICH7 System configuration:
  • Intel Q6600
  • 8GB Corsair DDR3 1333 RAM XMS3
  • 1TB Seagate Barracuda HDD + 1TB for XP
  • Nvidia GTS 450 1gb DDR3 Zotac
  • Audio VT1705 (multibeast VoodooHDA 2.1)
  • Ethernet Atheros
Installation method:
  • boot with rBoot for lion (chimera 1.9.1), boot from USB
  • Retail 10.7.0
  • boot from USB
  • multibeast 4.5.2 EasyBeast Install, MacPro3,1
  • install kext for audio (VT1705) with multibeast and choose VoodooHDA 2.2, Lnx2Mac's RealtekRTL81xx.kext
  • update to 10.7.4 with combo client update
AsRock H67M-GE Intel H67 System configuration:
  • Intel Pentium G620
  • 4GB ADATA 1066MHz DDR3 RAM
  • 1TB Samsung HDD (in BIOS seted to AHCI mode)
  • Asus Nvidia 210 Silent 1GB
  • Audio: Realtek
  • Network: Realtek
  • Wireless: TPLINK wn-781nd
  • USB Keyboard and Mouse
Installation method:
  • Install iATKOS L2 (with IOPCIFamily.kext, ALC892.kext, AHCI.kext, NVenabler.kext, USB.kext, USB3.0.kext, Realtek RTL8111/8168.kext, AR9285.kext and PS2.kext)
  • Change SMBIOS to Macbook Pro 8.3 (or something else, but I choose this) to enable iCloud
  • Update 10.7.3 and 10.7.4 from update software (No problem)

Working:

  • Audio OUT ALL
  • Audio IN ALL
  • Network
  • Video VGA, DVI and HDMI (not work Audio for HDMI)

Not Working:

  • Sleep
  • Hibernation
Tick.png Tick.png

ASUS

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
P7H55D-M EVO Intel H55 System:
  • CPU: Intel Core i5 650
  • GPU: GeForce GT 9500 1024 MB
  • RAM: Kingston DDR3 1333 MHz 2 x 2 GB
  • HDD: Samsung 500 GB SATA
  • Audio: Realtek ALC 889 onboard
  • Ethernet: Realtek 8112L Gigabit onboard
  • Wi-Fi: D-Link DWA-556 (recognized as AirPort)
  • Bluetooth: D-Link DBT-122 with Magic Mouse, Magic Trackpad and Apple Wireless Keyboard
  • Shutdown: Yes
  • Restart: Yes
  • Sleep: Yes
Installation method: Clean installation of Mac OS X Lion 10.7.4 downloaded from Mac App Store. No custom DSDT used.

Post-installation:

  • System definition: iMac 11,1 (to make Mac App Store and iCloud work)

Patches applied (MultiBeast 4.5.2):

  • ALC8xxHDA
  • AppleHDA Rollback
  • HDAEnabler ALC889
  • 3rd Party SATA
  • Lnx2Mac's RealtekRTL81xx Ethernet

 Tick.png Tick.png
P7H55-M PRO Intel H55 System configuration:
  • Intel Core i3-550 @ 3.21 Ghz
  • DDR3 4GB (1x4) 1333 MHz Ram
  • GeForce 450 GTS 1024MB GDDR5
  • Audio Realtek ALC892

Component status:

  • Audio works - Patched AppleHDA + HDAEnabler
  • Ethernet - Realtek RTL8111B/C & RTL8112L
  • USB 2.0 - Native
  • Shutdown/Reboot - Work
  • Sleep - doesn't work
Installation method:
  • Retail Method with Lion 10.7 (Manually created USB Installer)
  • Updated with Software Update
  • DSDT not used

Post install.

  • Chameleon 2.1 rev 2026 with Sata Module
  • FakeSMC, NullCPUPowerManagement, and Mac Pro 5,1 SMBIOS
  • Lnx2Mac RTL81xx
  • GraphicsEnabler=Yes

NOT Working:

  • Sleep mode. Haven't tried SleepEnabler
Tick.png Tick.png
Asus P5E-Deluxe Intel X48 System configuration:
  • Intel Core 2 Quad 9550K
  • Chipset Intel X48
  • MSI GTX 580 Lightning
  • Dual Display
  • Audio (Logitech H360 Headset) works by default
  • LAN (Marvell88E8056) works with drivers of iATKOS L2
  • Wireless Adapter ASUS WL-138g V2 works by default
Installation method:

- iATKOS L2 selecting:

  • Marvell Yukon 88E8056 kext
  • Voodoo HD Audio 2.2 kext

- UPDATE Mac OS X to 7.4

  • Install GTX 580 Drivers (use Champlist to install the Kext - Destination: System/Library/Extensions)

Working:

  • Shutdown/Reboot
  • Mac App Store
  • iCloud
  • Logitech H360 Headset
  • Dual Monitor [HDMI + DVI]

NOT Working:

  • Sleep mode
Tick.png Tick.png
Asus P5N7A-VM NVidia nForce 730i System configuration:
  • Intel Core 2 Quad 9550
  • Chipset NVidia nForce 730i
  • Asus GeForce 210
  • Dual Display
  • Built-in Audio
  • Built-in Ethernet
  • IOGear USB BT Adapter with Apple Magic Mouse
Installation method:

- UniBeast Install of 10.7.4 Mac App Store Install

  • Add EHCIhard=Yes and USBLegacyOff=Yes to org.chameleon.Boot.plist

- MultiBeast install

  • Audio - AppleHDARollback, Non-DSDT Enabler for ALC888
  • Disk - IOAHCIBlockStorageInjector (also JMicron if using ATA devices)
  • Misc - EvOreboot, FakeSMC, IOUSBFamily Rollback and NullCPUPowerManagement
  • GraphicsEnabler=Yes

Working:

  • Reboot (Shutdown works sporadically)
  • Mac App Store
  • iCloud
  • Apple Magic Mouse
  • Dual Monitor [HDMI + DVI]

NOT Tested:

  • Sleep mode
Tick.png Tick.png


Asus P5Q SE Intel P45/ICH10 System configuration:
  • Intel Core 2 Quad Q6600 2.39 GHZ
  • 3GB 666 MHZ DDR2 SDRAM (Generic 2 1ghz and 2 .5ghz)
  • Nvidia 8500 GT 256 MB
  • Dual Display
  • Onboard Audio works with drivers of iATKOS L2 Mic ?
  • Audio Diamond Express 7.1 PCI sound card works with (CMI8738AudioDevice.kext for 64 bit)
  • LAN (Atheros) works with drivers of iATKOS L2
  • Rear USB OOB and Front need USB Fix from iATKOS L2
  • SIIG RF Wireless Keyboard USB OOB
Installation method:

- iATKOS L2 selecting:

  • Already Chosen Kext Files by iAtkos installation CD
  • Atheros Wired Kext
  • Voodoo HD Audio 2.2 kext
  • NVEnabler
  • USB Fix for front case USB's
  • Install CMI Kext for Diamond Express 7.1 using Kext Drop

- UPDATE Mac OS X to 7.4

Working:

  • Shutdown/Reboot
  • Mac App Store
  • iCloud
  • SIIG RF Wireless Keyboard
  • Dual Monitor [HDMI + DVI]
  • Dual Boot with Win 7 on Seperate Hard Drive
  • Using Champlist Themed for Chameleon
  • All Seems To Work

NOT Working:

  • Sleep mode (disabled sleep mode)
Tick.png Tick.png
P5KPL-AM EPU P35 + ICH9, BIOS 501 Hardware:
  • Intel Core2Duo E6420 CPU 2.13 GHz
  • XFX GT240 512 mb DDR3 works fully

Notes

  • BIOS: Store Configuration ATA/IDE Enhanced;Enhanced Mode Support:S-ATA; IDE Detect Time: 35
  • Audio - works with VoodooHDA_261_HP_HDX18 (Output and Inputs) edit Info.plist, replace the key IOPCIClassMatch by IOPCIPrimaryMatch and put the PCI ID of your audio card in string. View: [1]
  • Ethernet - Works from pack Atheros AR8121 AR8113AR 8114
  • USB - All Work
  • IDE - Work
  • ICH9R - Works

Install Method:

  • 1.BootCD: BOOTCD.ISO
  • 2.iAtkos L1 from USB
  • 3. Boot with the comand: npci=0x2000
  • Bootloader: Chameleon 2.1svn
  • MacOsxUpp Combo 10.7.2
  • Shutdown/Reboot work 99.9% of the time.
  • Mac App Store WORKS!!!
  • iCloud WORKS!!!

Patches

  • Bootloader: Chameleon 2.1svn
  • Graphics Enabler
  • Built-in Ethernet
  • Extra/Extensions
  • FakesMc
  • Disabler
  • EVO Reboot
  • Update to 10.7.2, Update 10.7.3, and Update 10.7.4 ALL WORKING!
  • Sound+Ethernet: from download files


NOT Working:

  • Sleep mode (disabled sleep mode)
  • Microphone input

Useful Tools

Tick.png Tick.png
Asus P8H61 PRO Intel H61/ATX System configuration:
  • Intel Core i5 2500 @ 3.30 GHz (Quad Core) 6Mb Cache
  • Corsair 8Gb DDR3 1600 MHz
  • Asus NVIDIA GT440 1GB 1024Mb DDR3
  • Realtek ALC887 8-Channel High Definition Audio
  • Audio Diamond Express 7.1 PCI sound card works with (CMI8738AudioDevice.kext for 64 bit)
  • Realtek RTL8168/8111 PCI-E Gigabit Ethernet Adapter
  • Seagate Barracuda (500 GB, 7200 RPM, SATA-II) [Linux Hard Drive]
  • Western Digital 200 Gb, IDE with SATA-II Adapter [iAtkos Hard Drive]
  • Logitech K520 Combo Wireless Keyboard & Mouse
  • Logitech Z506 Surround Sound Speakers 5.1
  • Dual Monitor
Installation method:

- Select AHCI and set in Bios AHCI Mode

- iATKOS L2 selecting

  • Chameleon 2.1
  • Graphics Enabler
  • Built-in Ethernet
  • FakeSMC
  • Ev0reboot
  • Vodoo HDA 2.7.3
  • VGA GF100
  • Wired Realtek RTL 8111/8168

- UPDATE Mac OS X to 7.4

- Install Kext nVidia GeForce GT440 1Gb/ Silent Natit x86_64, heal kext with Kext Wizard and put this code in your org.chameleon.Boot.plist

<key>NVCAP</key>
<data>04000000 00000300 08000000 00000007 00000000</data>
<key>VRAM,totalsize</key>
<data>00000040</data>

Working:

  • Shutdown/Reboot
  • Mac App Store
  • Logitech K520 Combo Wireless Keyboard & Mouse
  • Logitech Z506 Surround Sound Speakers 5.1
  • Dual Boot with Ubuntu (Linux) on Seperate Hard Drive
  • All Seems To Work

NOT Working:

  • Sleep mode (disabled sleep mode)
  • iCloud
  • Dual Monitor (DVI + VGA)
Tick.png Tick.png

ECS

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
H55H-M REV(1.0) Intel® H55 Express Chipset System configuration:
  • Intel Core i3 530 2.93GHz
  • Chipset Intel® H55
  • EVGA GTX 550 Ti
  • 500 GB SATA drive
  • Audio works with (VoodooHDA)
  • LAN works with (this kext)
  • QE/CI works native
Installation method:

- Used one hard drive of 500GB. 335GB for Lion and 150GB for Windows 7. Used Transmac on Windows 7 to write a Retail image dmg to USB flash drive, with Xboot, put the Bootloader CD on a pendrive, boot by pendrive, select the disk installation of Mac. Installed Lion to GUID partition on a partitioned hard drive. Installed the (Chameleon 2.1 rev 1856 Fix, iCloud and Facetime.)


Working:

  • Shutdown/Reboot/Sleepmode
  • Mac App Store
  • Dual Boot with Windows 7 on the same Hard Drive
  • iCloud
  • Facetime
  • DVI-DVI-HDMI Fully working
  • All Seems To Work

Notes

  • The network, fails to upload files, the kext have one bug, (0x4000).
  • Buyed the TL-WN781N(Lite), used the kext from here (AR9285)

Hardware specification

  • Network (venId 1969 : devId 1063)
  • Sound (venId 8086 : devId 3b56)
  • Videocard (venId 1244: devId 10de)
Tick.png Tick.png

EVGA

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
EVGA 132-CK-NF78 nForce 780i System configuration:
  • Intel Core 2 Quad
  • Chipset nForce 780i
  • EVGA GTX 550 Ti
  • 60 GB IDE drive
  • Audio works with VoodooHDA.kext 2.7.3
  • LAN works with nForceLAN.0.64.5.kext
  • QE/CI works with NVEnabler.kext
Installation method:

- Used two separate hard drives. One for XP and one for Lion. Used Transmac on XP to write iATKOS L2 dmg to USB flash drive. Installed Chameleon Install 2.1 Rev 1806 for Windows and used to boot iATKOS L2 Lion USB flash drive. Installed Lion to GUID partition on empty hard drive. If you get kernel panic on first boot and hangs on pci configuration use flags -v npci=0x2000. If you see kernel panic about ElliotForceLegacyRTC.kext login to Windows and use transmac to delete the kext from Lion HD. Must use npci=0x2000 flag to boot. Will test again and add updates soon. - UPDATE Mac OS X to 7.4

  • Download 10.7.4 combo update and install. Restart.

Working: NOT Working:

Tick.png Tick.png


Foxconn

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
G31MXP Intel G31/ICH7 System configuration:
  • Intel Core 2 Quad Q6600
  • Chipset G31
  • Nvidia Geforce 8800 GT
  • Sata 1TB
  • Audio ALC662 works with VoodooHDA.kext 2.7.3
  • LAN works with Lnx2Mac ethernet drivers
  • QE/CI works with NVEnabler.kext from OSX86
Installation method:

- MacApp Store Version With Xmove - UPDATE Mac OS X to 10.7.4 From System Update

  • MultiBeast And Chimera

Working:

Tick.png Tick.png


Gigabyte

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
GA-Z68X-UD3H-B3 rev1.3 (F12) Intel® Z68 Express Chipset System Configuration:
  • CPU: Intel Core i5 - 2500K
  • GPU: Intel HD3000 (DVI only)
  • GPU: Asus EAX6850 DirectCU (1xDVI)
  • RAM: Kingstone HyperX 2x4GB 1600Mhz

Component Status:

  • All works

Notes:

  • Install method - Lion.dmg installed from thumb drive
  • Update to 10.7.4 by using Software Update
  • Gigabyte Z68X-UD3H-B3 pack [2] / all-in-one post-installation pack designed specifically for this motherboard and Lion 10.7. Fully patched DSDT included + several useful applications...
Tick.png Tick.png
GA-946GM-S2 Intel 946GZ Express Chipset System Configuration:
  • CPU: Intel Core 2 Duo E7300 - 2,66GHz
  • GPU: nVidia 9600GT 512MB
  • RAM: Kingstone 2x4GB 666Mhz

Component Status:

  • All works

Notes:

  • Install method - iATKOS L2 10.7.2.
  • Update to 10.7.4 by using Software Update (there is no problems)
  • Chameleon 2.1
  • Unchecked "Graphics Enabler"
  • Original Apple Boot Logo
  • FakeSMC
  • Disabler
  • EvOreBoot
  • Sound: VoodooHDA v2.7.3
  • GPU: NVEnabler
  • Ethernet: Wired - Realtek RTL8111/8168
Tick.png Tick.png
GA-H55M-UD2H Intel® H55 Express Chipset System Configuration:
  • CPU: Intel Core i5 760
  • GPU: Asus Nvidia GeForce 9800GT 1GB
  • RAM: Buffalo 2x4GB 1333Mhz

Component Status:

  • All works

Notes:

  • Install method - Lion 10.7.4 installed with UniBeast
  • Multibeast . Lion Edition 4.5.2
  • EasyBeast: NO - UserDSDT: NO - System Utilities: YES
  • Audio: ALC8xxHDA: YES - AppleHDA Rollback: YES - Non-DSDT HDAEnabler: AC889
  • Disk: 3rdParty SATA - 3rdParty eSATA - JMicron36x ATA
  • Graphics: NO
  • Miscellaneous: ElliottForceLegacyRTC: YES - EvOreboot: YES - FakeSMC: YES - FakeSMC Plugins: Motherboard and NVIDIA - IOUSFamily Rollback. YES - NullCPUPowerManagement: YES
  • Network: Lnx2Mac's RealtekRT81xx
  • Bootloaders: Chimera v1.9.2 r1394
  • Customization: Boot Options: 64-bit Apple Boot Screen - PCI Root ID Fix - PCI Configuration Fix
  • System Definition: Mac Pro 3,1
  • Themes: Chameleon RC5
Tick.png Tick.png
Gigabyte EP45-UD3P Rev. 1.6 Intel® P45 + ICH10R Chipset System Configuration:
  • CPU: Intel Core 2 Duo E7400 2.8GHz
  • GPU: MSI Nvidia GeForce 8400GS 512BM
  • RAM: 7GB DDR2 800MHz Kingston KVR
  • Mac OS X Lion 7.4 (Build 11E53)
  • System defenition: Mac Pro 3.1

Component Status:

  • GPU Dual Monitor working.

Notes:

  • Installed Lion from App Store. Patched with Kakewalk
  • SOUND WILL WORK AFTER UPDATING TO 7.4!!!!
  • Software update to 10.7.4
  • Resolution at 1600x900 (Dell ST2010) and 1280x10249 (Unknown Sony display) with full acceleration
Patches
  • Kakewalk for appstore app patching.
  • right kext are installed during lion installation automatically
  • Onboard Apple Software update is working. used it for updating to 7.4
  • sleep not working yet.
  • time machine not tested yet.


Tick.png Tick.png
Gigabyte G41M-E2SL rev. 1.1 INTEL G41/ICH7 System Configuration:
  • CPU: Intel Core2Duo E6300 1.86 GHz
  • GPU: PNY GeForce 210 1Gb
  • Mac OS X Lion 10.7.4 (11E53)

Component Status:

  • Onboard Intel X4500 video not tested

Notes:

  • Installed from iAtkos Lion L2
  • Software update to 10.7.4
  • Resolution at 1680x1050 with full acceleration
Patches
  • AUDIO: Voodoo 0.2.61
  • GRAPHICS: "Graphics enabler" only
  • NETWORK: RealkTek RTL8111C Gigabit Ethernet recognized as RTL8169
Tick.png Tick.png
Gigabyte GA-G41MT-S2PT (rev. 1.0) Intel G41/ICH7 System configuration:
  • Intel Core2Duo E7300 2.66 GHz
  • Sparkle GeForce 9600 GT 512 MB
  • Kingston 4 Gb DDR3 KVR1333D3N9
  • Integrated Realtek ALC887 High Definition Audio, Realtek RTL8111E Ethernet
  • Seagate Barracuda HDD (320 GB, SATA)
  • Canon LBP2900B USB Printer
  • USB keyboard Microsoft 600, USB mouse A4Tech X6-58D
  • Logitech Z-10 USB Speakers


BIOS Settings:

- Load Optimized Defaults, Boot Priority to USB-HDD, change SATA to AHCI mode, and set HPET to 64-bit mode.

Initial installation:

- Lion .dmg file from App Store + Unibeast (guide is here); ignore STEP 4 and Multibeast

Working:

  • Shutdown/Reboot, Sleep/Wake
  • Mac App Store, iCloud
  • Software Update
  • Steam Games
  • All USB devices
  • All Seems To Work

Not tested yet:

  • Dual boot
  • TimeMachine
  • Webcam
Kexts and patches:

- Right after Lion installation you should use your new bootable USB flash drive from tonymacx86 guide to run system, install kexts and make changes listed below. This is temporary and necessary.

- Now you can eject USB flash loader and use Chameleon on HDD

  • Run Multibeast, check to install only IOUSBFamily Rollback (to prevent KP when plugging USB devices).
  • To enable iCloud and AppStore add these lines to org.chameleon.Boot.plist

<key>EthernetBuiltIn</key> <string>Yes</string>

and use Champlist App to fake your system info.

If something with Chameleon goes wrong, you always can use your flash drive and start over. Here are screenshots of my org.chameleon.Boot.plist and SMBios.plist for reference.

Tick.png Tick.png
Gigabyte GA-H61M-D2-B3 (F10) INTEL H61 System Configuration:
  • CPU: Intel G840 - 2.80 GHz
  • GPU: Zotac GF9800GT 1Gb
  • RAM: 8GB 1333mhz RAM (2 x 4GB)
  • Mac OS X Lion 10.7.4 (11E53)

Component Status:

  • All works

Notes:

  • Install method - flash drive with XPC + flash drive with Lion 10.7.3 from AppStore
  • Update to 10.7.4 by using Software Update
  • Using DSDT from TonyMac DSDT Database
  • Using RTL8111E kext from Realtek offsite
  • Patch ALC889
Patches

DSDT

Tick.png Tick.png
Gigabyte GA-H61M-DS2 (rev 2.1) INTEL H61 System Configuration:
  • CPU: Intel Core i7 2600k 3.4GHz
  • GPU: Gigabyte geforce 210 1Gb
  • RAM: 4GB 1333mhz RAM ADATA

Component Status:

  • All works (but integrated graphics not intel hd 3000)i tried everything no QE/CI, no resolutions

Notes:

  • Install method - flash drive with unibeast + Lion 10.7 from AppStore
  • After dont update install multibeast (easybeast, lan driver 8111l, bootoptions 32bits Apple boot screen
  • Now in my case my hard drive does not boot after multibeast install boot error, solution (http://www.mymac4music.com/2011/10/boot0-error/)with new hard drives seagate 500gb sata III.
  • now you can boot from hd now install update 10.7.4 combo and everything
  • last Patch ALC887/888b (but you need select ALC8XXX and ALC887/888b in multibeast and from https://tonymacx86.com/viewtopic.php?f=16&t=59061&start=140 get the AppleHDA /887_Lion_AppleHDA_887-100302/ for lion ALC887 and install with kextbest)
  • sleep with SleepEnabler.kext 10.7.4 Dell N4050 from kexts.com
Patches

there is no DSDT for my motherboard revision version.?????

Tick.png Tick.png
GA-M67MA-USB3-B3 (F3) INTEL H67 System Configuration:
  • CPU: Core i3 2100 - 3.06 GHz
  • GPU: Gainward GT430 1GB
  • RAM: 4GB DDR3 1333mhz (1x4GB)
  • Mac OS X Lion 10.7.4 (11E53)

Component Status:

  • All working

Notes:

  • Install method: iAtkos L1 (installing all drivers) -> update to 10.7.4 (run MultiBeast and select only sound drivers)
  • Using DSDT from TonyMac DSDT Database
  • Drivers from MultiBeast
  • All things work, exept sound, from DSDT.
  • Installed on an A-DATA NH92 ExHDD

MultiBeast Lion 4.5.2

  • EasyBeast: NO - UserDSDT: YES - System Utilities: YES

Using DSDT from http://www.tonymacx86.com/dsdt

  • Audio: ALC8xxHDA: YES - AppleHDA Rollback: YES - Patched AppleHDA: AC889
  • Miscellaneous: USB 3.0 NEC/Renesas and Etron
  • Network: Lnx2Mac ethernet drivers
Tick.png Tick.png
GA-Z68X-UD3H-B3 (F12) INTEL Z68 System Configuration:
  • CPU: Core i7 2600K - 3.50 GHz
  • GPU: Zotac GTX560 1GB
  • RAM: 32GB DDR3 1333MHz (4 x 8GB)
  • Mac OS X Lion 10.7.4 (11E53)

Component Status:

  • All working except sleep function
  • Onboard VGA not tested

Notes:

  • Install method: UniBeast + MultiBeast - Image from AppStore 10.7
  • Update to 10.7.4 (downloaded from Apple website)
  • Using DSDT from TonyMac DSDT Database
  • Drivers from MultiBeast

MultiBeast Lion 4.5.2

  • EasyBeast: NO - UserDSDT: YES - System Utilities: YES

Using DSDT from http://www.tonymacx86.com/dsdt

  • Audio: ALC8xxHDA: YES - AppleHDA Rollback: YES - Patched AppleHDA: AC889
  • Disk: IOAHCIBlockStorageInjector - 3rdParty eSATA
  • Graphics: NVidia 4xx/5xx 10.7.2+ Combo OpenCL
  • Miscellaneous: USB 3.0 NEC/Renesas and Etron
  • Network: Realtek Gigabit Ethernet 2.0.6 for 10.7
Tick.png Tick.png
GA-Z68X-UD3H-B3 1.3 (F12) INTEL Z68 System Configuration:
  • Core i7 2700K - 3.50 GHz (Clocked to 3.59)
  • GeForce 9800GT 1GB
  • 12GB DDR3 1333MHz (2x4 + 2x2)
  • 120GB OCZ Vertex SSD
  • ECHO AudioFire4 Firewire Soundcard
  • Mac OS X Lion 10.7.2.dmg

Component Status:

  • Sleep almost works, keyboard unresponsive after wake
  • Onboard audio seems to work (not tested, FW was OOB!)
  • USB3 status unknown.
  • Rest works.

Notes:

  • Install method: Kakewalk-4.1.1 with 10.7.2.dmg
  • System Update to 10.7.4
  • Drivers etc from MultiBeast 4.5.2

Benchmarks:

  • Geekbench = 12180
  • Cinebench openGL = 33.88 fps, rendering = 6.7 pts

MultiBeast Lion 4.5.2

  • UserDSDT (with no dsdt on desktop)
  • System Utilities
  • 3rdParty SATA
  • TRIM enabler
  • FakeSMC Plugins (Motherboard, NVIDIA, HWMonitor app)
  • USB 3.0 NEC/Renesas and Etron
  • Realtek Gigabit Ethernet 2.0.6 for 10.7
  • SSDT Core i7
Tick.png Tick.png
GA-X58A-UD3R rev 1.0 X58/ICH10 System Configuration:
  • CPU: Core i7 2.7 GHz
  • GPU: GTS 250 1GB
  • RAM: 8GB DDR3 1333MHz (Picks up as 1079MHz)
  • Mac OS X Lion 10.7.4 (11E53)

Component Status:

  • All working except sound, see below.

Notes:

  • Install method: Kakewalk 4.1.1 Image from AppStore 10.7
  • Update to 10.7.4 (Combo Update)
  • Use Kakewalk again after update to reinstall kexts for sound and sleep.
  • www(dot)kakewalk(dot)se
  • Graphics: Works out of box
  • Sound: Works after reinstalling kakewalk.
  • Miscellaneous: USB 3.0 (Think it is working)
  • Network: Works out of box
Tick.png Tick.png
GA-H61N-USB3 (F4) INTEL H61 System Configuration:
  • CPU: Core i5 2500K - 3.39 GHz
  • GPU: Intel HD graphics 3000
  • RAM: 8GB DDR3 1333MHz (2 x 4GB)
  • Mac OS X Lion 10.7.4 (11E53)

Component Status:

  • All working
  • Intel HD graphics 3000 - fully supported OOTB

Notes:

  • Install method: UniBeast + MultiBeast - Lion (AppStore)
  • Update to 10.7.4 (Software Update)
  • Using DSDT from TonyMac DSDT Database
  • Drivers from MultiBeast

MultiBeast Lion

  • EasyBeast: NO - UserDSDT: YES - System Utilities: YES
  • Audio: ALC8xxHDA: YES - AppleHDA Rollback: YES
  • Disk: just selected all
  • Graphics: Graphics enabler
  • Miscellaneous: USB 3.0
  • Network: Lnx2Mac´s Ethernet driver
Tick.png Tick.png
GA-P31-DS3L (F10a) INTEL P31 (ICH7) System Configuration:
  • CPU: Core 2 Duo - 2.4 GHz
  • GPU: Nvidia 8800GT
  • RAM: 4GB DDR2 800MHz (2 x 2GB)
  • Mac OS X Lion 10.7.4 (11E53)

Component Status:

  • All working

MultiBeast Lion

  • EasyBeast: NO - UserDSDT: YES - System Utilities: YES
  • Audio: ALC8xxHDA: YES - AppleHDA Rollback: YES
  • Disk: None
  • Graphics: GraphicsEnabler=Yes
  • Miscellaneous: Installed PCI fix after encountering black screen during 10.7.2 update - not sure if strictly required
  • Network: Lnx2Mac´s Ethernet driver

Notes:

  • Install method: UniBeast 1.30 + Lion (AppStore)
  • Update to 10.7.4 (Combo Update to allow re-run of Multibeast before reboot)
  • Using hand edited DSDT - required Zolky(Zoliky?) DSDT patch to cure black screen after 10.7.2 update - Snow Leo partition proved invaluable!
  • Drivers from MultiBeast
Tick.png Tick.png
GA-EP31-DS3L INTEL P31 (ICH7) System Configuration:
  • CPU: INTEL CORE QUAD CPU Q9550 @ 2.83 GHz 64 bits
  • GPU: Nvidia 8600GT
  • RAM: 4GB DDR2 800MHz (2 x 2GB)
  • Mac OS X Lion 10.7.4 (11E53)
  • PCI Card with 4 usb 2.0

Component Status:

  • All working

MultiBeast 4.6.1 Lion

  • EasyBeast: NO
  • UserDSDT: YES (from osx86.net)
  • System Utilities: YES
  • Audio: ALC888-v100202 Legacy: YES - AppleHDA Rollback: YES
  • Disk: None
  • Graphics: NO
  • Miscellaneous: NO
  • Network: Lnx2Mac´s RealtekRTL81XX Ethernet v0.0.90

Notes:

  • Install method: UniBeast 1.40 + Lion 10.7.4 (11E53 AppStore)
  • Working with 2 monitors without need to install graphic extensions
  • Drivers from MultiBeast 4.6.1
Tick.png Tick.png
GA-945GM-S2 Rev. 1.0 Chipset: Intel 945G and ICH7 System Configuration:
  • CPU: Core 2 Duo E4600
  • Graphics: Galaxy Nvidia GeForce 210 1GB
  • RAM: 2x DDR2 Kingston ValueRam 1GB 667Mhz
  • NEC USB2.0 card with 3 ports
  • Mac OS X Lion 10.7.4 (11E53)
  • Logitech Optical Mouse (USB)
  • Microsoft Wired Keyboard 600
  • DVD Burner: Samsung SH-222BB
  • HDD: WDC WD5000AAKX-001CA0
  • Acer V193HQL monitor

Component Status

  • Mostly working (No sleep, iCloud untested)
BIOS Settings
  • CPU Enhanced Halt: Disabled
  • CPU Thermal Monitor: Disabled
  • Execute Disabled Bit: Disabled
  • (These are required otherwise kernel panics occur at random times)

iAtkos L2:

  • Chameleon bootloader
  • GraphicsEnabler:Yes
  • RTL811B LAN Driver
  • Non-AHCI SATA
  • FakeSMC
  • EvoReboot
  • Disabler.kext
  • VoodooHDA 2.7.3

Post-install

  • First boot needs the "npci=0x2000" flag
  • The flag was added to the boot.plist using Champlist

Updated

  • First updated using the 10.7.3 Combo update
  • Make sure to delete AppleHDA.kext from /System/Library/Extensions before rebooting
  • Then update using the 10.7.4 Combo update
  • Once again delete the AppleHDA.kext before rebooting
Tick.png Tick.png
GA-P31-ES3G Chipset: Intel P31/G31 Express and ICH7 System Configuration:
  • CPU: Core 2 Duo E5200 2.5Ghz;
  • Graphics: Palit Nvidia GeForce 9500GT 512MB;
  • Mac OS X Lion 10.7.4 (11E53);
  • USB Mouse & Keyboard.

Component Status

  • All working
MultiBeast Lion
  • EasyBeast
  • Universal audio
  • Network Realtek RTL8111
  • For 9500GT natit.kext
Tick.png Tick.png

Intel

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Intel DG31PR Intel G31 System configuration:
  • Intel Core 2 Duo E7400
  • Chipset Intel G31
  • NVIDIA GeForce GT240 1GB GDDR5 (GraphicsEnabler)
  • Audio ALC888 (ALC8xxHDA + NonDSDT HDEnabler)
  • RTL8111GR integrated Gigabit Ethernet (Lnx2Mac)
Installation method:
  • Lion 10.7 (iATKOS L2)
  • Combo Update to 10.7.4
  • Used FakeSMC, Alc8xxHDA, Chameleon and GraphicsEnabler, as well as AppleACPIPS2Nub.kext and ApplePS2Controller.kext, in order to make PS/2 keyboards and mice work.

Working:

  • Shutdown/Reboot
  • Mac App Store
  • Graphics acceleration (2D/3D)
  • Most applications including Adobe Premiere (as using graphics kexts seems to crash the latter)
  • Peripherals such as printers (namely an Epson L100 and an HP Deskjet all-in-one) work normally

NOT Working:

  • Sleep mode powers down the system rather than putting it to sleep as intended.
Tick.png Tick.png
Intel DG41RQ (LGA775) Intel G41 (ICH7) System Configuration:
  • CPU: Intel Core 2 Duo E7500 2.93GHz
  • GPU: XFX ATI Radeon HD 6450 2GB GDDR3
  • RAM: Hynix 4GB DDR2 800MHz
  • HDD: Seagate 500GB
  • LAN: Realtek RTL8111D/8168B
  • Audio: Realtek ALC662
  • Logitech K120 USB Keyboard & Mouse
  • LG W1941S Display

Installation method:

  • Fresh install of 10.7.4 USB

Boot Flags:

  • GE=Y
  • AC=Pithecia
  • GCS=Y
  • GPS=Y

Kexts:

S/L/E

  • FakeSMC 4.2.0 (with plugins)
  • VoodooHDA 0.2.56
  • Realtek RTL81xx 0.0.90

Functionality:

  • Bootup like a real Macintosh (No need to patch AppleIntelCPUPowerManagement.kext / no need to install NullCPUManagement.kext)
  • AppStore, iCloud, DVD player and all applications are working
  • CPU works OOB (Recognized OOB)
  • GPU Acceleration (QE/CI) works OOB and natively shown as ATI Radeon HD 6450 Series
  • Onboard LAN works
  • Onboard Audio works
  • Both i386 and x86_64 kernels works fine
  • Shutdown & Restart works
  • Sleep/Wakeup works with SleepEnabler.kext (Only in i386 kernel)
  • Patched DSDT
  • Patched Pithecia FB
  • BootLoader : Chimera 1.11.0
  • SMBIOS: Mac Pro 3,1


Tick.png Tick.png
Intel DH55TC Intel 82H55 System Configuration:
  • CPU: Intel Core i5-760 2.8GHz(recognized OOB)
  • GPU: Sapphire Radeon HD 6850 1GB(works OOB)
  • RAM: 8GB DDR3 1333MHz(recognizes even the memory slots)
  • HDD: Hitachi 1TB(It has 4k sectors, so use this tutorial if chimera doesn't load: http://forge.voodooprojects.org/p/chameleon/issues/129/ )
  • Apple Wired Keyboard, Trust GTX32s(I programmed the keys under windows, they work like under windows.)
  • LG Flatron W2243S
  • Fresh install of 10.7.4 (retail download from App Store) with USB unibeast method

Boot Flags:

EasyBeast default

Kexts:

S/L/E

  • The kexts installed by EasyBeast selection in MultiBeast

Functionality:

  • AppStore and iCloud working great
  • Graphics works OOB (QE/CI)
  • Onboard LAN works
  • Onboard Audio works
  • Shutdown & Restart works (But Sleep/Wakeup not working)


  • BootLoader : Chimera 1.10.0
  • SMBIOS: Mac Pro 3,1
Tick.png Cross.png

MSI

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
P55-GD65 P55 System Configuration:
  • CPU: Intel Core i5 - 750 - 2,66 GHz
  • GPU: Gainward 560Ti 1024MB
  • Dual Display
  • RAM: 12GB (2x2GB, 2x4GB)
  • WiFi: TP-LINK TL WDN4800
  • MAC OS X 10.7.4 (11E53)

Component Status:

Looks like everything works here

WiFi recognized as a Airport Extreme just plug and play :)

Notes:

  • Install method - iAtkos L2 10.7.2
  • than 10.7.4 Update + MultiBeast 4.4.1

Installation:

- iAtkos L2:

  • Voodoo 2.7.3 for Audio
  • Voodoo for PS/2
  • AHCI SATA

-MultiBeast 4.4.1:

  • Nvidia 4xx/5xx Support
Tick.png Tick.png
945GM3 V3 945G System Configuration:
  • CPU: Intel Core2 Duo E6300 1.86GHz
  • GPU: XFX 9600GSO 1024MB
  • RAM: 2x 1GB Super Talent 667 MHz
  • Bluetooth: IOGEAR GBU221WM (works OOB)

Installation:
Started with 10.7.0 from APP Store


MyHack 2.2 Chameleon Flags:
npci=0x3000
Graphics Enabler = Yes
EthernetBuiltIn = Yes
arch=i386 (for audio)


Multibeast 4.3.1
Realtek Gigabit Ethernet

Also downloaded Realtek_ALC883_Audio.DMG from OSx86.net

System update all the way to 10.7.4 with no problems

Used same method for another PC with 7600 GS graphics card.
I was also able to move entire hard drive and run on a MSI G31M3-F V2 which I could not get MyHack 2.2 to run on. No additional patches or kext needed.


 Tick.png Tick.png

Graphics Cards

Please specify if your card is AGP, Integrated, PCI or PCI-E.
Also, place chip and board manufacturer in their respective column.

PCI-E

Integrated Graphics

Model Board-Manufacturer Notes QE Output Dual Display 32/64bit
Intel HD graphics 3000 Works OOB with GraphicsEnabler=Yes Tick.png VGA/DVI/ (HDMI not tested) Not Tested Not Tested Not Tested
Intel HD graphics 4000 Works OOB with GraphicsEnabler=Yes Tick.png Gigabyte GA-Z77-DS3H @ F6 HDMI no HDMI, other not tested Not Tested Not Tested

AMD/ATI

Model Board-Manufacturer Notes QE Output Dual Display 32/64bit
Radeon HD4870 512MB DDR3 Gainward Works OOB and with GraphicsEnabler=Yes Tick.png Tick.png DVI, DVI Yes Tick.png Tick.png
Radeon HD4870x2 2048MB DDR3 Gigabyte OOB you can switch a resolution,but it runs without HW acceleration. Acceleration can be enabled by installing 10.7.4 netkas ATI 48xx Patch and ATI 48xx Device Injector from MultiBeast 4.6.1 Tick.png Tick.png Only 1 DVI out tested Yes Tick.png Tick.png
XFX Radeon HD 5770 1GB DDR5 (577X-ZHLC) XFX Works OOB and with GraphicsEnabler=Yes Tick.png Tick.png DVI, DVI, miniHDMI. Works with DVI to HDMI cable too. Yes Tick.png Tick.png
MSI R5770 Hawk 1GB MSI Works OOB for primary output (DVI). If you set GraphicsEnabler=Yes, the 2nd output (HDMI) will show the same desktop as DVI output, and OSX's display setting panel shows it is a VGA device and cannot be modified.

Then I tried to set GraphicsEnabler=No and reboot, these 2 outputs works normally ;-)

Tick.png Tick.png DVI, HDMI, DisplayPort (not tested) Yes Tick.png Tick.png
XFX Radeon HD 6450 2GB DDR3 XFX Works OOB and with GE=Y, AC=Pithecia, Pithecia patch Tick.png Tick.png VGA, DVI, HDMI Yes Tick.png Tick.png
Radeon HD 6670 1GB DDR5 Sapphire Works after adding few lines to Boot.plist file, i followed this tutorial - http://osx86.transformnews.com/?p=423 Tick.png Tick.png DVI works, VGA not tested, HDMI not tested. Yes Tick.png Tick.png
Radeon 6870 ZNFC XFX See this post.METHOD 1 (easier): Org.Chameleon needs the following: AtiPorts=5 AtiConfig=Gibba GraphicsEnabler=Yes in your /Extra folder along with edited Ati6000controller.kext made by BillDlv installed in S/L/E. I used the following links for my research 1 2 3 Method 2 (hard mode): Add graphics to DSDT using code copied and pasted from here. Follow this to get HDMI audio. Max monitors usable is 4 because the HDMI port is linked to the exact same pixel pipeline as one of the DVI ports via hardware. It is a physical limitation even Windows won't fix. Tick.png Tick.png DVI, DVI, HDMI, mDP, mDP Yes Tick.png Tick.png
HD 5850 Sapphire Tick.png DVI/HDMI/DisplayPort ? Tick.png Tick.png

NVIDIA

Model Board-Manufacturer Notes QE Output Dual display 32/64bit
GeForce 9500 GT 1GB GDDR2 ZOGIS Works OOB with GraphicsEnabler=Yes Tick.png DVI/HDMI/VGA Not Tested Tick.png OOB Not Tested
GeForce 9500 GT 1GB Asus Works OOB with GraphicsEnabler=Yes Tick.png DVI Tested Tick.png Tick.png Tick.png
GeForce GT 430 2048 MB NVIDIA USING TonyMac Multibeast 4.0
  • FOR GeForce GT430, Graphics>NVIDIA 4XX/5XX Support
  • ONLY recognizes 1024 Ram

works perfectly with graphics enabler 10.7.0-3. only tested in 32bit

Cross.png VGA/DVI/ (HDMI not tested yet) Tick.png Tick.png Tick.png
GeForce GT 220 1024 MB Pegatron/Dell/Asus-Offbrand USING Chameleon/Chimera GraphicsEnabler=Yes VBIOS=Yes NvidiaBios=Yes with bios.rom dumped from windows using NVFLASH. Rename bios to XXXX_XXXX.rom using the first XXXX as VendorID and the second XXXX as DeviceID. Tick.png VGA/DVI/ HDMI Tick.png Tick.png Tick.png
GT240 512MB DDR3 XFX Work with retail. GraphicsEnabler=Yes, PCI Configuration Fix (npci=0x2000. No patches. Work fine. Tested on a monitor 22" 1920x1080 full hd Tick.png DVI/VGA/HDMI Tick.png Tick.png Tick.png
GeForce GTX 480 (1536 Mb) (EVGA) NVIDIA TonyMac Multibeast 4.0
  • Worked "Out of the box". No additional kext needed.
  • Recognizes 1536 Mb
  • GraphicsEnabler = Yes
  • Cuda working
Tick.png VGA/DVI/ (HDMI not tested yet) Tick.png Tick.png Tick.png
GeForce 560 Ti 1024 MB Gainward Multibeast 4.4.1
  • Graphics>NVIDIA 4XX/5XX Support
DVI/DVI/ (HDMI not tested ) Tick.png Tick.png Tick.png
GeForce 550 Ti 1024 MB Asus Multibeast 4.5.1
  • Graphics>OpenCl Enabler
  • GraphicsEnabler = Yes
  • Computer say 1536Mb but everything work fine Photoshop, Minecraft, Diablo III
Tick.png DVI/DVI/ HDMI Tick.png Tick.png Tick.png
GeForce 8400 GS 512MB DDR3 EVGA Add 0x10c310de&0xffe0ffff to the list of devices in IOPCIPrimaryMatch in NVDANV50Hal.kext Tick.png Dual with VGA+DVI w / VGA Adapter Tick.png Tick.png Tick.png
GeForce 8400 GS 1GB EVGA aplicar un NVEneabler Tick.png DVI Funciona (VGA No Funciona) Cross.png Tick.png Tick.png
GeForce 8500 GT 256 MB Nvidia iAtkos NVenabler Tick.png DVI HDMI Tick.png Tick.png Tick.png
GeForce GTX 560 1 GB Zotac MultiBeast: Graphics: NVidia 4xx/5xx 10.7.2+ Combo OpenCL Tick.png DVI/DVI/HDMI/Display Port Tick.png Tick.png Tick.png
GeForce 8800 GT 512 MB GDDR3 Nvidia osx86 NVenabler Tick.png DVI/S-Video Tick.png Tick.png Tick.png

Network Cards

Wireless

Interface Standard Device Manufacturer Chipset Notes 32/64bit working with patch
PCI b/g/n300mbs TL-WN851N TP-Link Atheros 9280 TESTED WORKING - Mac OS X Lion 10.7.4 , appears as "AirPort Extreme (0x168C, 0x2091)".
Tick.png Tick.png
PCIE b/g/n150 TL-WN781N (Lite) TP-Link Atheros 9285 TESTED WORKING on 3.39 GHz Intel Core i5, Mac OS X Lion 10.7.4 (11E53), appears as "AirPort Extreme (0x168C, 0x30A1)".
  • Download this KEXT
  • Kext wizard to install
  • Kext Wizard or Kext Utility to repair permissions
  • After install, may have to create "WiFi" location in System Prefrences > Network.
Tick.png Tick.png
USB N150 TL-WN725N TP-Link Realtek 8188CU Tested and working on 10.7.4
  • Need to download the software from Realtek RTL8188CUS [3]
  • The Wireless Network Utility will mange the wireless connection, its included with the package
Tick.png Tick.png
USB IEEE 802.11 b/g/n NWD2205 ZyXEL drivers released on Zyxel site Tick.png Tick.png
USB IEEE 802.11 b/g/n NWD2105 ZyXEL drivers released on Zyxel site
PCI-E N300 DWA-556 D-Link Tested and working on 10.7.4 OOB. *May not work on all Dell desktops. Tick.png Tick.png

Wired (Ethernet)

Interface Standard Device Manufacturer Chipset Notes 32/64bit working with patch
PCI 10/100/1000 Gigabit TG-3269C TP-Link RTL8169 Install KEXT from [4]
  • Use kext wizard to install
  • Repair permissions
  • Reboot
Tick.png Tick.png
USB 10/100 Apple USB Ethernet Adapter Apple Asix AX8817X OOB 10.7.4 and Linux - Plug and Play http://tonymacx86.com/viewtopic.php?f=19&t=68741&p=428823#p428823 Tick.png Tick.png
Retrieved from "http://wiki.osx86project.org/wiki/index.php?title=HCL_10.7.4&oldid=64700"
Powered by MediaWiki © 2013 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   Mac Netbook  |   Web hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers