HCL 10.8.0/Desktops

From OSx86
(Difference between revisions)
Jump to: navigation, search
(Dell Optiplex 745)
Line 24: Line 24:
 
*USB: All work
 
*USB: All work
 
|
 
|
*Installed Mountain Lion 10.8 via Unibeast method
+
*Installed Mountain Lion 10.8
 
*Had to put [http://www.osx86.net/downloads.php?do=file&id=1824 IOATAFamily.kext] in /Extra folder so install drive would be recognized after install
 
*Had to put [http://www.osx86.net/downloads.php?do=file&id=1824 IOATAFamily.kext] in /Extra folder so install drive would be recognized after install
 
*IMPORTANT: DELETE Ati6000Controller.kext from S/L/E on USB drive and back it up elsewhere (you'll need it later)
 
*IMPORTANT: DELETE Ati6000Controller.kext from S/L/E on USB drive and back it up elsewhere (you'll need it later)
Line 31: Line 31:
 
*Once that's done, graphics will work otb (except it'll appear as AMD Radeon HD 6xxx 1024 MB for some reason)
 
*Once that's done, graphics will work otb (except it'll appear as AMD Radeon HD 6xxx 1024 MB for some reason)
 
*So boot flag GraphicsEnabler=no is no longer needed
 
*So boot flag GraphicsEnabler=no is no longer needed
*Installed VoodooHDA 0.2.7.3 (audio), ElliotForceLegacyRTC (prevent cmos/bios reset), EvOreboot (for shutdown and restart), FakeSMC (essential), and NullCPUPowerManagement (also essential) via Multibeast 5.0.2
+
*Installed VoodooHDA 0.2.7.3 (audio), ElliotForceLegacyRTC (prevent cmos/bios reset), EvOreboot (for shutdown and restart), FakeSMC (essential), and NullCPUPowerManagement (also essential)
 
*Installed Chameleon_2.1svn_r1820_trunk_10.8 as he boot loader
 
*Installed Chameleon_2.1svn_r1820_trunk_10.8 as he boot loader
 
*Installed [http://osx86.co/f36/bcm5754-m-bcm5755-m-bcm5787-m-bcm5906-m-t6946/ BCM5722D.kext] (via kext utility) for internet
 
*Installed [http://osx86.co/f36/bcm5754-m-bcm5755-m-bcm5787-m-bcm5906-m-t6946/ BCM5722D.kext] (via kext utility) for internet

Revision as of 16:17, 13 September 2012

OS X 10.8.0
Hardware Compatibility

This is a hardware compatibility list ONLY for OEM desktop computers. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying a desktop. Don't forget to add how you got OSx86 running on your x86 desktop computer, and to use proper English. Please see the discussion page for proper instructions on how to input your system specs. Also, please contribute to the HCL 10.8.0 page, which should list a more granular view of compatibility. If your computer isn't listed, you should try it if you have a SSE2 or higher processor. Use vanilla kernel if it is supported.

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for 10.8.0 builds only.

Please list your computers in alphabetical order by manufacturer (Asus, Acer, Dell, HP, etc)

For how to edit the Wiki, please see this thread. Thank you!

Note: Please add whether your device supports QE, Quartz Extreme, graphics. Try playing a movie with Quicktime Player.

Contents

DELL

Dell Optiplex 745

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Dell Optiplex 745 Intel Q645 Express w/ ICH8
  • Intel Core 2 Duo E6000 @ 2.13Ghz
  • RAM: 3GB 533 Mhz DDR2
  • VGA: Sapphire AMD Radeon HD 6670 1GB
  • Audio: onboard full working
  • Network: Broadcom 5754 Full working w/ special instructions listed here
  • Graphics: working but VGA is misidentified as AMD Radeon HD 6xxx
  • Monitor: Dell 20" DVI cable
  • Hard Disk: Seagate Barracuda 7200 80 GB
  • DVD: PBDS DVD+-RW DS-8W1P
  • USB: All work
  • Installed Mountain Lion 10.8
  • Had to put IOATAFamily.kext in /Extra folder so install drive would be recognized after install
  • IMPORTANT: DELETE Ati6000Controller.kext from S/L/E on USB drive and back it up elsewhere (you'll need it later)
  • When booting, use boot flag GraphicsEnabler=no
  • After install, boot into new ML install with USB and put the ATI6000Controller.kext into S/L/E of the new ML installation (not the USB) with Kext Utility and repair permissions and stuff
  • Once that's done, graphics will work otb (except it'll appear as AMD Radeon HD 6xxx 1024 MB for some reason)
  • So boot flag GraphicsEnabler=no is no longer needed
  • Installed VoodooHDA 0.2.7.3 (audio), ElliotForceLegacyRTC (prevent cmos/bios reset), EvOreboot (for shutdown and restart), FakeSMC (essential), and NullCPUPowerManagement (also essential)
  • Installed Chameleon_2.1svn_r1820_trunk_10.8 as he boot loader
  • Installed BCM5722D.kext (via kext utility) for internet
  • Added the following boot flags via Champlist: EthernetBuiltIn, ForceHPET, LegacyLogo, InstantMenu, GraphicsEnabler=yes
  • If you can't login to App Store, follow next 5 steps otherwise ignore these and device properties injection in last step
  • Go to EFIStudio -> Ethernet -> Add Device -> HEX String to Clipboard
  • Open Champlist again and click Device Properties and paste code from EFI Studio
  • Go to System Preferences -> network and delete any devices there
  • Then go to Library/Preferences/SystemConfiguration and delete NetworkInterfaces.plist
  • Reboot
  • Go to System Preferences and add device. If it's ethernet (like mine), it should say ethernet (not have en0 or en1 after it)
  • Reboot again and network should be good to go
  • Upgraded to 10.8.1 via manual download, works fine
  • Good Luck - Zackptg5
Yes Yes

DELL Optiplex 760

QE
Icon N.png
Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Dell Optiplex 760 Intel Q43 Express w/ ICH10D
  • Intel Core 2 Duo E8400 @ 3.0Ghz
  • RAM: 2GB 1333 Mhz DDR3
  • VGA : Integrad IntelGMA4500 64Mb
  • Audio : onboard Full working
  • Network: Intel WG82567LM Full working
  • Graphic: working with NO QE/CI
  • Monitor : Dell 22" DVI Cable
  • Hard Disk : Seagate SATA II 320Gb
  • DVD : TSSTCorp Sata TL-463A
  • USB, eSata: all work
  • Installed OS X MLion 10.8 Final with USB Pen creation + Chameleon-2.1svn-r1820.pkg + Extra folder from my Lion installation
  • I have used OSInstall.mpkg MBR patched to install dual boot on HD
  • Boot USB Pen and then create a MBR partition HFS+ journaled , then install as usual, Then install Chameleon , Extra_Lion and Kexts on HD
  • Bootloader - Chameleon-2.1svn-r1820.pkg
  • DSDT created by DSDT autopacher
  • Kexts used : fakesmc.kext,NullCPUPowerManagement.kext, ElliotForceLegacyRTC.kext (needed to avoid Bios Reset)
  • Audio - VoodooHDA.kext v. 2.62 (x86_64).
  • Video - no Kext - com.apple.Boot.plist - Graphics Mode=1280x1024x32 - GraphicsEnabler=Yes
  • SATA - AHCI in BIOS (Set by default on BIOS)
  • Ethernet - IntelE1000.kext
  • Sleep & Wakeup : Works , no Kext needed
  • OSX MLion start in 64 bit kernel by default
  • Best Regards by PippoX0
Yes Yes

DELL Optiplex 780

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Dell Optiplex 780 Intel Q45 Express w/ ICH10D
  • Intel Core 2 Duo E7500 @ 2.93Ghz
  • RAM: 3GB 1333 Mhz DDR3
  • VGA : ATI RADEON HD5450 512MB
  • Audio : ADI 1984A HDA onboard Full working
  • Network: Intel WG82567LM Full working / Hawking HWUG1 works with MAC OS 10.6 driver
  • Graphic: working with QE/CI 1680x1050x32
  • Bluetooth: USB bluetooth cambridge silicon radio works OOB
  • Monitor : HP W2207" VGA Cable
  • Hard Disk : SATA 160Gb 7200 RPM HDD
  • DVD : DVD +/- RW TSSTCorp Sata TL-463A
  • USB, eSata: all work
  • Installed 10.8 Final with USB Pen creation + Chameleon 2.1-SVN-r1820_Trunk_10.8.pkg
  • Boot USB Pen and then create a MBR partition HFS+ journaled , then install as usual, Then install Chameleon , Extra_iMac9_1 and Kexts on HD
  • Bootloader - Chameleon 2.1-SVN-r1820_Trunk_10.8
  • Kexts used : fakesmc.kext,NullCPUPowerManagement.kext, ElliotForceLegacyRTC.kext (needed to avoid Bios Reset), ATI5000.kext, AMDRadeonAccelerator.kext (needed for QE/CI)
  • Audio - VoodooHDA.kext v. 2.62 (x86_64).
  • Video - ATI5000.kext - org.chameleon.Boot.plist - Graphics Mode=1680x1050x32 - GraphicsEnabler=Yes - Modified AMDRadeonAccelerator.kext for QE/CI (Edit string IOPCIMatch added key 0x68E11002)
  • SATA - AHCI in BIOS (Set by default on BIOS)
  • Ethernet - IntelE1000.kext
  • Sleep & Wakeup : Works , no Kext needed
  • OSX Lion start in 64 bit kernel by default
Yes Yes
Powered by MediaWiki © 2015 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   PHP hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers