HCL 10.8.2

From OSx86
(Difference between revisions)
Jump to: navigation, search
(Undo revision 65631 by Redrat76 (talk))
(Intel)
Line 576: Line 576:
  
 
'''Works:'''
 
'''Works:'''
*Everything except Sleep/Wake  
+
*Everything except Sleep/Wake
 
+
| {{N}}
 +
| {{Y}}
 
|-
 
|-
 
||Intel DX58SO
 
||Intel DX58SO

Revision as of 21:21, 27 October 2012

OS X 10.8.2
Hardware Compatibility

This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for 10.8.2 builds only.

For how to edit the Wiki, please see this thread. Thank you!

You're looking for an Installation guide? see here

Note: For suggestions about table headings, please join the discussion here.


Contents

Motherboards

Abit

Hardware Name Chipset Notes Patches 32/64bit working with patches

Asrock

Hardware Name Chipset Notes Patches 32/64bit working with patches

Asus

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
P5B Intel P965/ICH8 System Configuration:
  • Install method: App Store purchase. Then App Store Update to 10.8.2
  • CPU: Intel Q9650 3GHz Detected as Quad-Core Intel Xeon
  • Memory: Samsung M378T5663EH3-CF73E DDR2 666 MHz 4 x 2Gb, Dual-channel
  • HDD: SAMSUNG HD103SI 1TB SATA
  • Video: ASUS GeForce EN210 Silent 512Mb DDR3
  • Audio: Digidesign MBox2 Pro FireWire, Logitech HD Webcam C510 USB
  • Ethernet: Realtek® PCI-E Gigabit (onboard)
  • Webcam: Logitech HD Webcam C510
  • Bluetooth: D-Link DBT-122
  • Peripherals: Apple Keyboard A1243, Apple Trackpad A1339
  • PCI cards: ST-Lab FireWire Controller (TSB43AB23 chip), UAD-2 SOLO DSP
  • Shutdown: Yes
  • Restart: Yes
  • Sleep: Not tested
  • FaceTime/iCloud/App Store: working


Bootloader:

  • Chameleon v2.1svn r2035
  • SMBIOS: MacPro3,1
Patches:
  • BIOS: SATA in AHCI mode. Disable Serial and Parallel ports. Memory remap, ACPI 2.0, ACPI APIC options enabled.
  • Kexts: FakeSMC, RealtekRTL81xx
  • Kernel flags: npci=0x2000 GraphicsEnabler=Yes EthernetBuiltIn=Yes USBBusFix=Yes
Cross.png Tick.png
P5KPL-AM/PS Intel G31/ICH7 System Configuration:
  • Install method: App Store purchase. Then App Store Update to 10.8.2
  • CPU: Intel Pentium Dual-Core E5400 @2.70 GHz
  • RAM: Kingston 2x2GB DDR2 800 MHz CL6
  • HDD: WD Cavier Blue SATA II 500 GB
  • Video: Inno3d GeForce 9500 GT 1 GB DDR2
  • Usage: These are all works, shutdown ,restart ,FaceTime ,App Store ,iCloud


Bootloader:

  • Chameleon v2.1svn r2064 (Or The Latest one)
  • SMBIOS: iMac11,2
Patches:
  • BIOS: ACPI 2.0, ACPI APIC options enabled.
  • Kexts: FakeSMC, RealtekRTL81xx, NVEnabler 64, NullCPUPowerManagement, VoodooHDA 2.7.3 (modified), CUDA
  • Kernel flags: EthernetBuiltIn=Yes USBBusFix=Yes GenerateCStates=Yes GeneratePStates=Yes UseKernelCache=Yes
Cross.png Tick.png
P8Z68-M Pro Z68 System Configuration:
  • CPU: Intel Core i5 2400 @ 3.1GHz
  • GPU: XFX Radeon HD 6870 1024 MB
  • RAM: 2x4GB DDR3 G.SKILL CL9 RipjawsX
  • Keyboard: Apple Keyboard
  • Mouse: Logitech MX518

Components Status:

  • All works, sleep, wakeup, shutdown, restart, speedstep, USB3.0, HDMI, Updates Through MacAppStore
  • For HDMI to work together with DVI and two screens on XFX Radeon HD 6870 use AtiConfig=Gibba w/o any modifications on ATI6000Controller.kext and GraphicsEnabler=yes in org.chameleon.Boot.plist

Install method:

Patches:
  • Latest Chameleon Bootloader
  • Kexts (FakeSMC, LNX2Mac's Realtek RTL81xx for LAN, Kext for Realtek ALC892 and USB 3.0 3rd Party)
  • DSDT and SSDT, smbios.plist from iMac 12,2
  • Patched AICPUPM.kext (Lion 10.7.3) for Speedstep from InsanelyMac
  • Modded Bios for P8Z68-M Pro
Cross.png Tick.png
P5PL2-E Intel 945G/ICH7 System Configuration:
  • Install method: App Store purchase. Then App Store Update to 10.8.2.
  • CPU: Intel C2D E6400 2.13GHz (Overclocked to 2.33Ghz)
  • Memory: Corsair DDR2 667 MHz 2 x 1Gb, Dual-channel
  • HDD: WD5000AADS-00S9B0 500Gb SATA
  • Video: GeForce 9500 GT Silent 1024Mb
  • Audio: M-Audio ProFire 610 (via ST-Lab FireWire Controller vs TSB43AB23 chip)
  • Ethernet: Realtek® RTL8111B PCI-E Gigabit (onboard)
  • Bluetooth: D-Link DBT-122
  • Shutdown: Yes, Restart: Yes, Sleep: Not tested
  • FaceTime/iCloud/App Store: working


Bootloader:

  • Chameleon v2.1svn r2035
  • SMBIOS: MacPro3,1
Patches:
  • BIOS (v0601, 01/19/07): SATA in AHCI mode. Serial and Parallel ports - disabled. Microcode updation, Execute Disable Function, ACPI 2.0, ACPI APIC options - enabled. Enhanced C1 Control, Hyper Path 3, Dram Trolling Threshold, Suspend Mode options - Auto.
  • Kexts: FakeSMC, RealtekRTL81xx, IOPCIFamily and AppleACPIPlatform (from www.osx86.net).
  • Kernel flags: GraphicsEnabler=Yes EthernetBuiltIn=Yes USBBusFix=Yes
  • If you forget enable Execute Disable Function in BIOS - mach_kernel boot will not start.
  • If you forget copy IOPCIFamily.kext and AppleACPIPlatform.kext to /S/L/E and rebuild kext cache - video will not work.
Cross.png Tick.png
P5E3 Premium/Wifi-AP Intel X48 - ICH9R SATA

Bios v.0803

System Configuration:
  • CPU: Intel Core2Quad Q9550 @ 3.4 GHz
  • GPU: ATI HD 4870 TOXIC 512Mb Works
  • RAM: 4x2GB DDR3 Corsair Xms3 1600MHz CL9

Components Status:

  • Audio - Works with limitation
  • Ethernet Marvell - Works (PERFECTLY!)
  • Ethernet Realteck - Disabled for iCloud
  • WiFi - Not tested, try with AirportExtreme
  • USB - Works (all)
  • Shutdown/Reboot - Works
  • Sleep - Not works
  • iCloud/App Store/FaceTime/iMessage Works

Install method:

After Install:

(DON'T RESTART!)

  • Delete AppleHDA.kext from Extensions folder
  • Install those kexts into S/L/E
  - VoodooHDA 2.7.3 
  - 3rd Party SATA 
  - ElliottForceLegacyRTC
  - EvOreboot
  - FakeSMC
  - NullCPUPowerManagement
  • System Definition -> Mac Pro 3,1
  • Add Marvell.kext in Extension folder
  • Download and run Kext Utility
  • Restart
  • Run with -v -f flags
Tick.png Tick.png
P6T Intel X58 ICH10R System Configuration:
  • CPU: 2.67 GHz Core Intel i7
  • Memory: 6 GB DDR3 1066 MHz
  • HDD: Western Digital 320 GB SATA
  • Video: PNY NVIDIA GeForce 9800 GTX+ 512Mb
  • Audio: Realtek ALC1200 (onboard)
  • Ethernet: Realtek 8111C PCIe (onboard)
  • Shutdown, Restart and Sleep working
  • FaceTime, iCloud and App Store working


Install Method:

  • 10.8.2 App Store Purchase
Added To "Extra" Folder:
  • smbios.plist: MacPro4,1
  • org.chameleon.Boot.plist


Kext Patches:

  • AHCI_3rdParty_SATA.kext
  • AppleACPIPlatform.kext
  • AppleHDA.kext
  • RealtekRTL81xx-0_0_90.pkg (install first kext option)
Cross.png Tick.png
P5G41T-M LX3 Intel G41 Express / Intel ICH7 System Configuration:
  • Video: Intel GMA X4500 (onboard- Not working)
  • Audio: Realtek ALC887 (onboard)
  • Ethernet: Gigabite Ethernet (onboard)
  • Shutdown, Restart and Sleep working
  • FaceTime, iCloud and App Store are NOT working


Install Method:

  • 10.8.2 App Store Purchase, Restore Basesystem.dmg to pen drive, Modified OSInstall, Chameleon.
Kext Patches: Cross.png Tick.png
P8Z77-V DELUXE Intel Z77 System Configuration:
  • Install method: myHack 10.8.0. Then apply Combo update to 10.8.2 + Multibeast
  • CPU: Intel Core i7 2600k 4.6Ghz detected as stock Intel Core i7 2600k
  • Memory: 4x 4Gb G.Skill Ripjaw X 1600Mhz DDR3, Dual Channel at XMP mode
  • HDD: 4 x 1Tb Seagate Barracuda 7200.12 SATA 2 AHCI mode.
  • Video: ASUS GTX670 DirectCUII Top
  • Audio: ALC898
  • Ethernet: Realtek 8111F + Intel 82579V Gigabit (both onboard)
  • Bluetooth: BroadCom, Not Working
  • USB 3.0: Not working
  • Integrated WiFi: Not Working.
  • Peripherals: Logitech K520 Keyboard + Mouse Wireless combo
  • Shutdown: Yes
  • Restart: Yes
  • Sleep: Not tested
  • App Store: Working


Bootloader:

  • Chimera 1.11.1
  • SMBIOS: iMac12,1
Patches:
  • BIOS: SATA in AHCI mode. Disable Serial and Parallel ports. PCIe Primary Display selected.
  • Kexts: Intially, only myhack ones. After the update to 10.8.2, added ALC898, Realtek And Intel LAN kexts from Multibeast 5.1.2.
  • Kernel flags: GraphicsEnabler=No. This has to be forced, to avoid whitescreen to appear before installation.
Tick.png Tick.png

Biostar

Hardware Name Chipset Notes Patches Used 32/64bit working with patches

EVGA

Hardware Name Chipset Notes Patches Used 32/64bit working with patches

Foxconn

Hardware Name Chipset Notes Patches Used 32/64bit working with patches

Gigabyte

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
GA-Z68X-UD4-B3 rev1.0 Intel® Z68 Express Chipset System Configuration:
  • CPU: Intel Core I5 - 2500k @4600
  • GPU: Nvidia 480 GTX
  • RAM: 2x4GB 1600Mhz
  • Wifi USB Lynx300

Component Status:

  • All works

Used:

  • Sound works without DSDT, Wifi works with Ralink drivers from ralink´s home page.
Cross.png Tick.png
GA EP45-UD3R Rev 1.1 Intel® P45+ICH10 Hardware:
  • Core2Duo E8400 processor 3.00Ghz
  • Ram 4GB DDR2 800MHz Kingston
  • Saphire ATI HD 5770 1024MB GDDR5 Vapor - X
  • Audio 889a|885 Patched
  • 10.8.2 fix it http://www.mediafire.com/?z5sommvss9sg4nn in S/L/E iT Work!! Then navigate to /System/Library/Extensions/FakeSMC.kext/Contents/Plugins/ and delete OEMsmbios.kext

Notes:

Kexts
  • FakeSMC in S/L/E
  • NullCPUPowerManagement in S/L/E
  • AppleHDA ALC889a/885
  • Lnx2mac
  • After Finish Install Realtek Gigabit Ethernet 2.0.6 for 10.7
Cross.png Tick.png
GA-Z77-DS3H rev1.0 Intel® Z77 Express Chipset System Configuration:
  • CPU: Intel Core i5 - 3570k
  • GPU: AMD Radeon HD6670
  • RAM: Kingstone HyperX 2x4GB 1600Mhz

Component Status:

  • All works

Notes:

  • Install method - Mountain Lion.dmg installed from thumb drive
  • Then App Store Update to 10.8.2
  • Gigabyte GA-Z77-DS3H pack [1] / all-in-one post-installation tool designed specifically for this motherboard and UEFI BIOS.
Cross.png Tick.png
GA-Z68P-DS3 rev1.2 Intel® Z68 Express Chipset System Configuration:
  • CPU: Intel Core i3 - 2100
  • GPU: AMD Radeon HD6450
  • RAM: Kingstone HyperX 2x4GB 1600Mhz

Component Status:

  • All works

Notes:

  • Install method - Mountain Lion.dmg installed from thumb drive
  • Then App Store Update to 10.8.2
  • System working w/o DSDT with UEFI BIOS
  • Gigabyte GA-Z68P-DS3 pack [2] / all-in-one post-installation tool designed specifically for this motherboard and UEFI BIOS.
Cross.png Tick.png
GA-Z68X-UD3H-B3 rev1.3 Intel® Z68 Express Chipset System Configuration:
  • CPU: Intel Core i5 - 2500K
  • GPU: Intel HD3000
  • GPU: Asus EAX6850 DirectCU
  • RAM: Kingstone HyperX 2x4GB 1600Mhz

Component Status:

  • All works

Notes:

  • Install method - Mountain Lion.dmg installed from thumb drive
  • Then App Store Update to 10.8.2
  • System working w/o DSDT with UEFI U1h BIOS
  • Gigabyte Z68X-UD3H-B3 pack [3] / all-in-one post-installation pack designed specifically for this motherboard and OS X 10.8. Fully patched DSDT included + several useful applications...
Cross.png Tick.png
GA-EP43-DS3L Intel® P43 Express Chipset System Configuration:
  • CPU: intel Core 2 Quad q9550 2,83Ghz
  • GPU: nvidia geforce 8800 GT
  • GPU: nvidia geforce gt 520 x1 Edition
  • RAM: Corsair 4x2GB 1066Mhz
  • BIOS: Cartri v.08

Component Status:

  • All works

Notes:

  • Install method - Mountain Lion.dmg
  • Then App Store Update to 10.8.2
  • System working NO DSDT
  • Sound patched with AppleHDA.kext and Legacy
Cross.png Tick.png
GA-P35-DS3R Intel P35/ICH9R System Configuration:
  • Install method: App Store purchase. Then App Store Update to 10.8.2
  • CPU: Intel Q9300 @3GHz Detected as Quad-Core Intel Xeon
  • Memory: TeamGroup DDR2 800 MHz 4 x 2Gb, Dual-channel
  • HDD: 2x500 GB SATA on RAID 0 (AppleRAID version 2.0 software)
  • Video: Leadtek GeForce 9800GT Green Edition 512Mb DDR3
  • Audio: Onboard ALC889A,
  • Ethernet: Realtek® PCI-E Gigabit (onboard) and Hama Mini USB 150 Wireless (Ralink2870 chipset)
  • Webcam: Webcam on monitor from Benq M2200 HD Link seen as QEye 2.0M pixel: from Chicony Electronics Co., Ltd.
  • Peripherals: Apple Keyboard A1243, USB Mouse, Apple Remote with this hack Link
  • Install method:
  • Use this method Link to get a functionaly RAID 0. On short you need 3 drives, one to get ML fully installated and configurated an 2 drives to make a RAID 0 and with CCC to clone instalated ML from first drive to the otherd 2 drives wich have RAID 0 configurated.
Patches:
  • Custom DSDT.aml
  • Shutdown: Tick.png
  • Restart: Tick.png
  • Webcam: Tick.png
  • Sleep: Cross.png


Bootloader:

  • Chameleon v2.1svn r2059 from here Link
  • SMBIOS: MacPro3,1
  • BIOS settings : SATA in AHCI mode. HPET to 64, Disable Serial and Parallel ports.
  • Kexts: FakeSMC, AppleHDA Rollback after each update
  • Kernel flags: EthernetBuiltIn=Yes and rd=uuid boot-uuid=your number to your RAID Identifier as Kernel flags
Cross.png Tick.png
G41MT -D3V (rev. 1.3) Intel® G41 Express Chipset/Intel ® ICH7 System Configuration:
  • Install method: Retail install
  • CPU: Intel DualCore E6750 2,66Ghz
  • Memory: Kingston DDR3 1333 MHz 2 x 2Gb, Dual-channel
  • HDD: Corsair F60 60GB SSD
  • Video: Gigabyte GeForce 560GTX(non TI) 1024Mb GDDR5
  • Audio: Onboard ALC889
  • Ethernet: Realtek 8111E detect as RTL 8169 10/100/1000
  • Peripherals: Apple Wireless Keyboard , Apple Magic Mouse,
  • Install method:
  • Fresh Install
  • Purchase Mountain Lion from the Mac App Store
Patches:
  • DSDT.aml


Bootloader:

  • Chimera v1.11.1 r1394
  • SMBIOS: MacPro3,1
  • BIOS settings : HPET to 64, Disable Serial and Parallel ports.
  • Kexts: FakeSMC, AppleHDA Realtek 2.0.6 for 10.7, If you use FakeSMC plugins, and get a kernel panic after reboot. Boot into safe mode by typing -x at the Chimera boot screen. Then navigate to /System/Library/Extensions/FakeSMC.kext/Contents/Plugins/ and delete OEMsmbios.kext. Then reboot
  • Kernel flags: EthernetBuiltIn=Yes, GenerateCStates=Yes, GeneratePStates=Yes

Works:

  • Shut Down/ Restart
  • Sleep/Wake up
  • iCloud, Appstore, Messeges.
  • FaceTime not tested
Cross.png Tick.png
GA-X58A-UD3R Intel P58/ICH10R System Configuration:
  • Install method: App Store purchase. Then App Store Update to 10.8.2
  • CPU: Intel i7-970 @3.20GHz
  • Memory: Corsair DDR3 1600 MHz DominatorGT 3 x 2Gb, Tri-channel
  • HDD: SSD Kingston 250Gb SATA3, HDD Seagate MomentusXT Hybrid 500Gb SATA2
  • Video: Asus ATI HD 4890 512Mb DDR3
  • Audio: Onboard ALC889,
  • Ethernet: Realtek® Realtek 8111E 10/100/1000
  • Peripherals: Apple Keyboard A1243, USB Mouse.
  • Install method:
  • Myhack instaler 10.8.0, later patck 10.8.2
Patches:
  • Custom DSDT.aml
  • Shutdown: Tick.png
  • Restart: Tick.png
  • Sound 2.0:Tick.png
  • IDE/ATA: Cross.png
  • Sleep: Cross.png


Bootloader:

  • Chimera v1.11.1 r1394
  • SMBIOS: MacPro5,1
  • BIOS settings : SATA in AHCI mode. HPET to 64.
Cross.png Tick.png
GA-Z77X-UD3H Intel® Z77 Express Chipset System Configuration
  • CPU: Intel i3-3770 (Ivy Bridge)
  • GPU: 2X Inno3D Geforce 660 2048MB

Notes

Kexts
  • FakeSMC.kext
  • AtherosL1cEthernet.kext
  • AHCI_3rdParty_eSATA.kext
  • No DSDT or SSDT
  • VoodooHDA 0.2.7.4
Cross.png Tick.png

Intel

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Intel DG41RQ Intel G41 (ICH7) System configuration:
  • CPU: Intel Core 2 Duo E7500
  • GPU: nVidia GeForce 210 Silent 1GB
  • HDA: Realtek ALC662
  • NIC: Realtek RTL8111D

BIOS Settings:

  • Load Default settings
  • Boot Device set to Legacy & SATA only
  • Enable UEFI Boot

Installation method:

  • Fresh Install of Retail ML 10.8.2 via USB
  • OS X 10.8.2 Supp Update via AppStore

Working:

  • Shutdown/Reboot
  • Mac App Store
  • iCloud
  • DVD Player
  • VGA, HDMI, DVI-D

Not Working:

  • Sleep/Wakeup
  • Patched DSDT [4]
  • NullCPUPowerManagement.kext / Add speedstep dsdt patch
  • FakeSMC 4.0 Rev.617 [5]
  • Chimera 1.11.1 Bootloader
  • VoodooHDA 2.7.4 (Two personalities included for on-board audio and HDMI Audio)
  • RTL81xxx 0.0.90
Cross.png Tick.png
Intel DG41WV (rev. 0007) Intel® G41 Express Chipset/Intel ® ICH7 System Configuration:
  • Install method: restore BaseSystem.dmg into a pendrive and install Chimera 11.1.1 r1394.
  • CPU: Intel DualCore E3400 2,60Ghz
  • Memory: Patriot DDR3 800 MHz 2 x 2Gb
  • HDD: WDC 500GB
  • Video: GeForce 8400GS 512Mb DDR2 ID 0x10c3
  • Audio: Onboard ALC662 via edited VoodooHDA: Link
  • Ethernet: Realtek RTL8111: Link
  • Peripherals: USB Mouse and Keyboard


  • Install method:
  • Purchase Mountain Lion from the Mac App Store
  • Restore BaseSystem.dmg into a pendrive and install Chimera 11.1.1 r1394
  • Copy mach_kernel, kernelcache and boot.efi to pendrive's root.
  • Put SMBios iMac9,1, org.chameleon.boot (with EthernetBuiltIn=Yes, GenerateCStates=Yes, GeneratePStates=Yes, GraphicsEnabler=Yes) in /Extra
  • Put FakeSMC in /Extra/Extensions or install it from Chimera


Patches:


Bootloader:

  • Chimera v1.11.1 r1394
  • SMBIOS: iMac9,1
  • BIOS settings : Sata Mode to AHCI.
  • Kexts: FakeSMC, AppleHDADisabler, VoodooHDA 0.2.56 (edited) and RealtekRTL81xx.
  • Kernel flags: EthernetBuiltIn=Yes, GenerateCStates=Yes, GeneratePStates=Yes, GraphicsEnabler=Yes). Problems with USB - add USBBusFix flag


Works:

  • Everything except Sleep/Wake
Cross.png Tick.png
Intel DX58SO Intel® X58 Express Chipset/Intel ® ICH10R System Configuration:
  • CPU: Intel I7 950 3,07Ghz (stock)
  • Memory: DDR3 1333 MHz 3 x 2Gb
  • HDD: 1000GB
  • Video: Sapphire Radeon 5770 Vapor-x
  • Audio: Onboard ALC889
  • Ethernet: Realtek
  • Peripherals: USB Mouse and Keyboard


  • Install method:
  • Retail Install from the Mac App Store
  • BootLoader : Chamaleon 2.1 RC5
  • SMBIOS: MacPro 4.1


Boot Flags:

  • GraphicsEnable=Yes
  • GeneratePStates=Yes
  • GenerateCStates=Yes
  • KernelCache=Yes
  • EthernetBuiltIn=Yes


Kexts:

S/L/E

  • FakeSMC
  • AppleHDA(patched)
  • Legacy889HDA
  • AppleIntel8256X


Functionality:

  • Everything works flawless. Video, Audio, Lan , Firewire, Wifi
  • Shut Down and Restart works with no Kext.
  • Sleep and Wake up works with no Kext.
  • Geekbench: 11.000 aprox.
  • Cinebench: 6 aprox.
  • GPU 37 Fps


VIDEO DEMO


Patches:
  • DsdtAutoPatcher link

Patches: DTGP, IRQS, SBUS, SHUTDOWN, LPC ICH10, REMOVED DEVICES, MUTE, AHCI ORANGE ICON, AZAL TO HDEF, HDEF, ALC889

Cross.png Tick.png

MSI

Hardware Name Chipset Notes Patches Used 32/64bit working with patches

Graphics Cards

Please specify if your card is AGP, Integrated, PCI or PCI-E.
Also, place chip and board manufacturer in their respective column.

PCI-E

AMD/ATI

Model Board-Manufacturer Notes QE/CI Output Dual display 32/64bit working
Radeon HD 4830 Sapphire Tick.png DVI / DVI Not tested Cross.png Tick.png
Radeon HD 5450 1GB Sapphire
  • Add dev ID 0x68E11002 to AMDRadeonAcellerator.kext under "Cedar" IOPCIMatch
  • Chimera v1.11.1 r1394, 10.8.2 build 12C54
  • GraphicsEnabler=No
Tick.png Only DVI tested Not tested Cross.png Tick.png
Radeon HD 5770 Sapphire Tick.png DVI / HDMI / VGA Not tested Cross.png Tick.png
Radeon HD 5850 Sapphire
  • Using this guide to get rid of the ghost monitor issue
  • GraphicsEnabler=Yes
  • since 10.8.2 sleep mode isn't working with this card, if you pick an older kext (10.8.1 or 10.8) it's still working fine
Tick.png DVI / DisplayPort (HDMI, VGA with adapter not tested) HDMI+DVI Cross.png Tick.png
Radeon HD 6450 XFX/Sapphire/MSI Tick.png DVI / HDMI / VGA Tick.png Tick.png Tick.png
Radeon HD 6770 Sapphire
  • Using this guide
  • Chameleon 2.0 RC5 or PCEFI 10.6 Lion + Snow
  • GraphicsEnabler=Yes
Tick.png DVI / HDMI / VGA Not tested Cross.png Tick.png

NVIDIA

Model Board-Manufacturer Notes QE/CI Output Dual display 32/64bit working
NVIDIA Geforce 8400GS Geforce 8400GS 512MB DDR2 ID 0x10c3
  • Working OOB
  • GraphicsEnabler = Yes
  • Install the current version of Chimera or Chameleon bootloader
  • Apparently it stops at [PCI Configuration Begin], but boot goes normally.
Tick.png VGA / DVI / HDMI Not tested Cross.png Tick.png
NVIDIA Geforce 8800 GTS 512MB (G92) GDDR3 ASUS EN8800GTS 512
  • Working OOB with original included kext (NVDANV50HAL.kext)
  • GraphicsEnabler=Yes
Tick.png DVI/DVI Not tested Cross.png Tick.png
NVIDIA Geforce 9500 GT Inno3d Geforce 9500 GT 1 GB DDR2
  • Working OOB
  • NVEnabler 64.kext and CUDA.kext
Tick.png VGA / DVI / HDMI Tested with DVI (VGA to DVI) and HDMI (DVI to HDMI) Cross.png Tick.png
Geforce 9800 Leadtek Geforce 9800 GT 512 MB Green Edition
  • Working OOB
Tick.png DVI / D-SUB / HDMI Not tested Cross.png Tick.png
NVIDIA GF 210 S CLUB 3D 1024 MB DDR3 DeviceID: 0x0a65 Revision: 0x00a2 ROM: 70.18.82.00.1B
  • Working OOB
  • GraphicsEnabler = Yes
Tick.png VGA / DVI / HDMI YES VGA+DVI

HDMI Not tested

Cross.png Tick.png
NVIDIA GTX 560 (non TI) Gigabyte GTX 560 1024 MB GDDR5 Model: GV-N56GOC-1GI
  • Working OOB
  • GraphicsEnabler = Yes
  • 10.8.0 OpenCL Enabler Nvidia GTX470 /480 /560TI /570/580
  • Nvidia Cuda Drivers for Mac From nvidia.com
Tick.png DVI / DVI / HDMI Not tested Cross.png Tick.png
NVIDIA GTX 660 Inno3D GTX 660 2048 MB GDDR5 Tick.png DVI / DVI / HDMI Not tested Cross.png Tick.png
NVIDIA GTX 560 (non TI) Zotac GTX 560 1024 MB GDDR5 Model: ZT-50701-10M
  • Working OOB
  • GraphicsEnabler = Yes
  • Nvidia Cuda Drivers for Mac From nvidia.com
Tick.png DVI / DVI / HDMI / VGA (DVI To VGA Adapter) / VGA (DVI To VGA Adapter) / Display Port (Not Tested) Tick.png Cross.png Tick.png
NVIDIA GT 430 PNY GT 430 1024MB DDR3 PCI Express® 2.0 Model : VCGGT4301XPB
  • Working OOB
  • GraphicsEnabler = Yes
  • Nvidia Cuda Drivers for Mac From nvidia.com
Tick.png DVI (Not Tested) / VGA / HDMI Tick.png Cross.png Tick.png
8600 GT NVidia 512MB
  • Working OOB
  • GraphicsEnabler = Yes under kernel Flags in com.apple.boot.plist
Tick.png VGA / DVI (not tested) Not tested Cross.png Tick.png

Integrated

INTEL

Model Board-Manufacturer Notes QE/CI Output Dual display 32/64bit working
GMA X4500 Intel Not working Cross.png VGA / DVI Not tested Cross.png Cross.png
GMA 3100 Intel Not Working Cross.png VGA /DVA Not tested Cross.png Cross.png

Network Cards

Wireless

Interface Standard Device Manufacturer Chipset Notes 32/64bit working with patch
USB 802.11 n/g/b Hama WLAN-USB-Stick 150 Mbps, Mini Hama RT2870 Used this driver Cross.png Tick.png
USB 802.11 n/g/b D-Link DWA-125 N150 D-Link RT3070 Download driver here Cross.png Tick.png
PCI Express 802.11 b/g/n PCI Express Wireless Ethernet D-LINK DWA-556 Atheros Working OOB Cross.png Tick.png

Wired (Ethernet)

Interface Standard Device Manufacturer Chipset Notes 32/64bit working with patch
PCI Express 10/100/1000 Mbps RJ-45 Gigabit Ethernet Gigabit Ethernet Card Planet ENW-9700 Marvell 88E8053 Working OOB Cross.png Tick.png

Integrated

Gigabit Ethernet Gigabit Ethernet Card Intel - Download Cross.png Tick.png
Integrated Gigabit Ethernet Intel 82566DC Intel - Works with Kext Cross.png Tick.png

Sound Cards

Interface Hardware Name Manufacturer Notes 32/64bit working with patch
Firewire FA 101 Edirol Working OOB Cross.png Tick.png
Integrated ALC887 Realtek Working with Kext. Best sound on any hackint0sh. Cross.png Tick.png
Integrated ALC888 Realtek Works with Kext Cross.png Tick.png

Other Accessories

Type of Accessory Item Description Manufacturer Notes 32/64bit working
Bluetooth USB V2.0 V 2.0 CBTU2A Conceptronic

Tested with Wireless Apple keyboard, Apple Magic Mouse and a bluteooth headset

Cross.png Tick.png
Bluetooth USB Adapter Nano Bluetooth USB Adapter, version 2.1+EDR class2, Link Hama

OOB. Tested with Apple Magic Mouse

Cross.png Tick.png
Bluetooth USB Adapter Belkin F8T016 Mini Bluetooth Adapter Belkin Working OOB. Tested with Apple Magic Mouse Cross.png Tick.png
Bluetooth USB Adapter Bluetooth 2.1 USB Micro Adapter IOGear Working OOB. Tested with Apple Magic Trackpad Cross.png Tick.png
Powered by MediaWiki © 2015 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   PHP hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers