Editing HCL 10.8.2/Portables

Jump to: navigation, search

Warning: You are not logged in.

Your IP address will be recorded in this page's edit history.
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 956: Line 956:
 
==Hewlett Packard==
 
==Hewlett Packard==
 
===EliteBook 8440p===
 
===EliteBook 8440p===
 +
  
 
'''''Installation media:'''''
 
'''''Installation media:'''''
  
Bootable USB-Stick made with the original "Apple Mountain Lion Installation App" (10.8.0 12A269) from the Appstore.
+
Bootable USB-Stick made with UniBeast (ML) and the original „Apple Mountain Lion Installation App“ (10.8.0 12A269) from the Appstore.
 +
 
  
 
'''''Installation method (without DSDT):'''''
 
'''''Installation method (without DSDT):'''''
 
* Boot from the prepared USB-Stick with connected USB-Keyboard & mouse (no boot-flags needed)
 
* Boot from the prepared USB-Stick with connected USB-Keyboard & mouse (no boot-flags needed)
* After successfull installation: Restart (using USB-Stick as "Bootloader"), boot up the new ML-Installation and setup your working OS X for the first start. Graphics and webcam should work at this time (KB & mouse still via USB)
+
* After successfull installation: Restart (using USB-Stick as „Bootloader“), boot up the new ML-Installation and setup your working OS X for the first start. Graphics and webcam should work at this time (KB & mouse still via USB)
* Install PS2-Drivers for ML from Google search. - Now keyboard, trackpad and stickpoint should work
+
* Install PS2-Drivers using MultiBeast v5.0.2 (Drivers & Bootloaders -> Drivers -> Miscellaneous -> PS/2 Keyboard/Mice and Trackpads) and reboot. - Now keyboard, trackpad and stickpoint should work
 +
* Install EasyBeast with Multibeast v5.0.2 – ATTENTION: After installation of EasyBeast the USB-Ports will not work after reboot. You have to delete the bootflag „UseKernelCache=Yes“ in „org.chameleon.Boot.plist“ (under „/Extra/“) to fix that problem
 
* After reboot OS X should boot and shut-down without any CMOS-problems
 
* After reboot OS X should boot and shut-down without any CMOS-problems
* Install "AppleIntelE1000e.kext" from the file called "HP 8440p kexts" ([http://www.osx86.net/downloads.php?do=file&id=2151 Download here]). – After reboot the Ethernet-card should work.
+
* Install „AppleIntelE1000e.kext“ from the file called „HP 8440p kexts“ ([http://www.osx86.net/downloads.php?do=file&id=2151 Download here]). – After reboot the Ethernet-card should work.
* Install "AppleACPIPlatform.kext" and "VoodooBattery.kext" to get Battery-Symbol work. You find the kexts in file "AppleACPIPlatform & VoodooBattery" v1.3.6 ([http://www.osx86.net/downloads.php?do=file&id=2648 Download here])
+
* Install „AppleACPIPlatform.kext“ and „VoodooBattery.kext“ to get Battery-Symbol work. You find the kexts in file „AppleACPIPlatform & VoodooBattery“ v1.3.6 ([http://www.osx86.net/downloads.php?do=file&id=2648 Download here])
  
  
Line 993: Line 996:
 
'''''DSDT:'''''
 
'''''DSDT:'''''
  
I found [http://www.osx86.net/downloads.php?do=file&id=3029 that DSDT] after I installed OS X 10.8.1 - So I installed the DSDT (and removed the "UseKernelCache=Yes" in "org.chameleon.Boot.plist" after install, because the trackpad didn't work any more). After that, everything works fine and I think the System is now loading faster than without the DSDT. - You have to decide for yourself if you want to use it or not.
+
I found [http://www.osx86.net/downloads.php?do=file&id=3029 that DSDT] after I installed OS X 10.8.1 - So I installed the DSDT with MultiBeast (and removed the „UseKernelCache=Yes“ in „org.chameleon.Boot.plist“ after install, cause the trackpad didn't work any more). After that, everything works fine and I think the System is now loading faster than without the DSDT. - You have to decide for yourself if you want to use it or not.
  
  
Line 1,042: Line 1,045:
 
|Internal built-in
 
|Internal built-in
 
|Working
 
|Working
|Using "PS/2 Keyboard/Mice and Trackpads" Driver
+
|Using "PS/2 Keyboard/Mice and Trackpads" Driver from Multibeast v5.0.2 ([http://www.osx86.net/downloads.php?do=file&id=3240 Download])
 
|{{N}} 32bit not tested / {{Y}}
 
|{{N}} 32bit not tested / {{Y}}
 
|-
 
|-

Please note that all contributions to OSx86 may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see OSx86:Copyrights for details). Do not submit copyrighted work without permission!

Cancel | Editing help (opens in new window)
Powered by MediaWiki © 2015 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   PHP hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers