HCL 10.9.3

From OSx86
Revision as of 06:36, 9 June 2014 by 192.116.127.113 (Talk)

Jump to: navigation, search
macOS 10.9.3
Hardware Compatibility

This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for 10.9.3 builds only.

For how to edit the Wiki, please see this thread. Thank you!

You're looking for an Installation guide? see here

Note: For suggestions about table headings, please join the discussion here.
Note: Keep in mind that OSx86/InsanelyMac does NOT and will NOT support any tools from Tonymacx86 such as MultiBeast or any other -Beast utilities, as per this thread: http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/ Any mention of Multibeast, Kextbeast or any other Beast tools will be removed at our discretion.

Contents

Motherboards

Abit

Hardware Name Chipset Notes Patches Used Compatible 64bit

Alienware

Hardware Name Chipset Notes Patches Used Compatible 64bit

Asrock

Hardware Name Chipset Notes Patches Used Compatible 64bit
B85M-Pro4 Intel B85 System Configuration:
  • CPU: Core i3 4130
  • GPU: Saphire HD5450 512MB

Bios settings

  • Version: 1.90
  • Virtualization disabled
  • primary graphics: pci-e
  • legacy mode

Installation:

  • AppStore Mavericks app (10.9.3)
  • SMBios: iMac14,2
  • USB created myHack 3.3.1 (no MBR patch)
  • patched mach_kernel

System Status:

  • AMD Graphics: QE, full 3D acceleration Tick.png
  • Intel IGP Graphics Cross.png - not tested!
  • Audio Tick.png
  • Ethernet Tick.png
  • USB 3.0 Tick.png
  • Sleep, Shutdown, Restart Tick.png
Post-installation:
  • Kernel -> directly after installation replace mach_kernel

(HDD) with patched kernel (MyHack USB) through Terminal.app

Chameleon Boot Flags:

  • GraphicsEnabler=No

Extra / Extensions:

  • AppleIntelE1000e.kext
  • FakeSMC.kext
  • lspcidrv.kext
  • Patched_10.7_AppleRTC.kext
Tick.png

Asus

Hardware Name Chipset Notes Patches Used Compatible 64bit
M5A78L-M LX3 AMD 760(780L)/SB710 System Configuration:
  • CPU: AMD FX-6100 @3.3 Ghz
  • GPU: Nvidia GeForce G210
  • RAM: 2x4GB 1600Mhz
  • HDD: Seagate Barracuda 1Tb


Bios settings:

  • AHCI
  • Suspend Mode S3


Installation:

  • AppStore Mavericks app (10.9.3) update from 10.9.2


System Status:

  • Graphics: QE, full 3D acceleration DVI VGA Tick.png
  • Audio -> USB Hercules Djconsole 4-MxEthernet Tick.png
  • TimeMachine, App Store Tick.png
  • Sleep, Wakeup, Poweroff Tick.png
Post-installation: Tick.png
P9X79 LE X79 System Configuration:
  • CPU: Intel i7 3820 @ 3.6GHz
  • GPU: Asus 650 Ti 1024Mb
  • RAM: 32Gb Corsair XMS3
  • HDD: SSD 64Gb


Installation:

  • AppStore Mavericks app (10.9.3) update from 10.9.2


System Status:

  • Graphics: Native, works fine Tick.png
  • Audio: ALC892 (patched) Tick.png
  • TimeMachine, App Store, iMessage, Facetime Tick.png
  • Sleep, Wakeup, Poweroff Tick.png
  • USB 3.0 Tick.png
Post-installation:
  • Realtek kext
  • ALC892 + HDAEnabler1 + Applications/Utilities/Audio Midi Setup - change the Frequency from 44100hz to 48000hz
Tick.png

Biostar

Hardware Name Chipset Notes Patches Used Compatible 64bit

EVGA

Hardware Name Chipset Notes Patches Used Compatible 64bit

Foxconn

Hardware Name Chipset Notes Patches Used Compatible 64bit

Gigabyte

Hardware Name Chipset Notes Patches Used Compatible 64bit
GA-Z97M-D3H Intel® H97 Chipset

System Configuration:

  • CPU: Intel Core i5 4570 @3.4 GHz
  • GPU: internal Intel HD4600 + Nvidia EVGA GTX760 ACX 2GB GDDR5
  • RAM: 4x4GB 1600Mhz
  • HDD: Samsung 840 EVO 120GB SSD + 2 x Western Digital Caviar 2Tb

Component Status:

  • Graphics: Nvidia EVGA GTX760 QE, full 3D acceleration DVI HDMI Dual MonitorsTick.png
  • Ethernet Tick.png
  • Audio: ALC892 Cross.png
  • USB 3.0 Tick.png
  • TimeMachine, App Store, iMessage, Facetime Tick.png
  • Sleep, Wakeup, Poweroff Tick.png

BIOS changes:

  • Sata mode is AHCI
  • Vt-D is disabled

Installation Method:

  • tonymacx86 MultiB Method

Post-Installation:

  • DSDT Free + TRIM
Tick.png
GA-H87M-D3H Intel® H87 Chipset

System Configuration:

  • CPU: Intel Core i5 4570 @3.4 GHz
  • GPU: internal Intel HD4600
  • RAM: 1x4GB 1600Mhz
  • HDD: Kingston 120 GB SSD

Component Status:

  • Graphics including HDMI ok
  • Ethernet ok
  • USB 3.0 ok
  • App Store&imessage ok
  • Sleep, Wakeup, Poweroff ok

BIOS changes:

  • xHCI mode is auto
  • xHCI and EHCI Hand-off is enabled
  • Vt-D is disenabled

Installation Method:

  • Myhack Method; bootflag; -v -x

Post-Installation:

  • ALC892, RealtekRTL81xx v0.0.90 ,TRIM, NullCPU
Tick.png
GA-EP45-UD3P
  • North Bridge: Intel® P45 Express Chipset
  • South Bridge: Intel® ICH10R

System Configuration:

  • CPU: Intel Core 2 Quad Q8400 @2.66 GHz
  • GPU: ATI Radeon HD 6770
  • RAM: 4x2GB 800 MHz
  • HDD: Samsung 840 EVO 250GB + 1TB Western Digital Caviar Blue in Fusion Drive

Component Status:

  • Graphics including HDMI ok
  • Ethernet ok
  • USB ok
  • App Store ok
  • iMessage Not working yet
  • Sleep displays go off but PC keeps running
  • Wakeup, Poweroff ok
  • Sound Will break after App Store upgrade from 10.9.2
  • AppleTyMCEDriver.kext removed after upgrade trough the recovery partition due to kernel panic

BIOS changes:

  • Sata mode is AHCI
  • Vt-X is enabled

Installation Method:

  • Myhack Method; manually install Chamelon bootloader to the boot partitions of BOTH disks

Post-Installation:

  • ALC889, RealtekRTL81xx v0.0.90 ,TRIM, silent boot, custom DSDT, restart fix, ati config set to Bulrushes
Tick.png

Intel

Hardware Name Chipset Notes Patches Used Compatible 64bit

MSI

Hardware Name Chipset Notes Patches Used Compatible 64bit
B75MA-E33 Intel® B75 System configuration:
  • CPU: Intel Celeron G1610 (2.6 GHz)
  • GPU: Palit NV GT640 1Gb
  • RAM: Corsair 8Gb CMV8GX3M1A1333C9 DDR3
  • HDA: Realtek ALC887
  • NIC: Realtek RTL8169
  • HDD: OCZ Vertex 4 128Gb

BIOS Settings:

  • Load Optimized settings
  • Patched Bios

Installation method:

  • App Store 10.9.0 InstallESD.dmg
  • USB Installation
  • NVIDIA kexts from 10.9.2 taken here to avoid no signal NV issue

System Status:

  • Graphics: QE, full 3D acceleration, native resolution, DVI monitor detected correctly Tick.png
  • Audio Tick.png
  • Ethernet Tick.png
  • USB 2.0 Tick.png
  • USB 3.0 Tick.png
  • TimeMachine, App Store Tick.png
  • Sleep, Wakeup, Poweroff Tick.png
Post-installation:
  • DSDT-Free
  • Audio -> Realtek ALCxxx -> Without DSDT -> ALC 887/888b -> Current + HDAEnabler
  • Network -> Lnx2Mac's RealtekRTL81xxx
  • System definitions -> MacPro3,1 (default)
  • Chameleon Bootloader
  • FakeSMC
  • NVIDIA Web driver installed
Tick.png
MSI P-31/W8 Intel® H61 B3 System configuration:
  • CPU: Intel Core i3 - 3220 (3.3GHZ Ivy Bridge)
  • GPU: Asus Geforce GT630 2GB Silent
  • RAM: Kingston 4GB
  • HDA: Realtek ALC887
  • NIC: Realtek 811x
  • HDD: Western Digital 500GB Caviar Blue

BIOS Settings: Just change SATA mode to AHCI

Installation method:

  • App Store 10.9.0 InstallESD.dmg
  • USB Installation
  • NVIDIA Card works OOB but just in case install this here

System Status:

  • Graphics: QE, full 3D acceleration, native resolution, DVI/HDMI monitor detected correctly Tick.png
  • Audio Tick.png
  • Ethernet Tick.png
  • USB 2.0 Tick.png
  • USB 3.0 Tick.png
  • TimeMachine, App Store Tick.png
  • Poweroff Tick.png
Post-installation:
  • DSDT-Free
  • Audio -> Realtek ALCxxx -> Without DSDT -> Universal -> (Any versions of VoodooHDA after v.2.72)Reason: HDAEnabler version doesn't detect front panel jacks
  • Network -> Lnx2Mac's RealtekRTL81xxx
  • System definitions -> MacPro5,1
  • Clover Bootloader (Be sure to check "Install Clover on UEFI motherboards)
  • FakeSMC

"Info"

  • Sleep works a bit properly cous it can wakeup but mouse will freeze after that.
Tick.png

PCWARE

Hardware Name Chipset Notes Patches Used Compatible 64bit

QUO

Hardware Name Chipset Notes Patches Used Compatible 64bit

Supermicro

Hardware Name Chipset Notes Patches Used Compatible 64bit
X9SRA C602 System configuration:
  • Motherboard: Supermicro X9SRA motherboard
  • CPU: Intel Xeon E5-2620
  • RAM: 64GB of RAM
  • GPU: NVIDIA Quadro NVS 315
  • HDD: Intel SSDs
Tick.png

Graphics Cards

Please specify if your card is PCI-E or Integrated.
Also, place chip and board manufacturer in their respective column.

PCI-E

AMD/ATI

Model Board-Manufacturer Notes QE/CI Output Dual display Compatible 64bit
Radeon HD 4350 Asus
  • Clover r2565 Bootloader with FakeID 0x94901002
  • GraphicsEnabler => No and no DefaultFramebuffer
  • Workis still good as Office Card but nothing more
Tick.png DVI / HDMI Not tested Tick.png
Radeon HD 4830 Sapphire
  • Using QE_CI Exotic patch
  • Chameleon 2.0 RC5 (or the most recent) or PCEFI 10.6 Lion + Snow
  • GraphicsEnabler=Yes
Tick.png DVI / DVI Not tested Tick.png
Radeon HD 5450 Sapphire
  • Patched ID 0x68f91002 in AMD5000Controller and ATIRadeonX3000.
  • GraphicsEnabler = No
Tick.png DVI / HDMI / VGA Tick.png

DVI+VGA

Tick.png
Radeon HD 6770 Sapphire
  • Using those methods
  • Chameleon 2.0 RC5 (or the most recent) or PCEFI 10.6 Lion + Snow
  • GraphicsEnabler => No more need!!!
Tick.png DVI / HDMI / VGA Not tested Tick.png
Radeon R9 270 Asus
  • Clover r2671
  • ATI FakeID: 0x68101002
  • Inject ATI: True (pretty reporting in profiler, no HDMI) or False (don't care, wants HDMI)
  • FB Name: (not set)
  • Clover Kext Patch (inspired by Vlada's patch):
<dict>
	<key>Name</key>
	<string>AMD7000Controller</string>
	<key>Find</key>
	<data>AAQAAAQDAAAAAQEBEgQEAQAEAAAEAwAAAAECASIFBQIEAAAAFAIAAAABAwAAAAYGAAgAAAQCAAAA</data>
	<key>Replace</key>
	<data>BAAAABQCAAAAAQAAEQIFBQAIAAAEAgAAAAEAACIFAgMABAAABAMAAAABAAASBAEBAAIAAAQCAAAA</data>
</dict>
Tick.png DVI / HDMI Not tested Tick.png

NVIDIA

Model Board-Manufacturer Notes QE/CI Output Dual display Compatible 64bit

Integrated

INTEL

Model Board-Manufacturer Notes QE/CI Output Dual display Compatible 64bit

Network Cards

Wireless

Interface Standard Device Manufacturer Chipset Notes Compatible 64bit

Wired (Ethernet)

Interface Standard Device Manufacturer Notes Compatible 64bit

Sound Cards

Interface Hardware Name Manufacturer Notes Compatible 64bit

Webcams

Interface Item Description Manufacturer Notes Compatible 64bit

Bluetooth

Interface Item Description Manufacturer Chipset Notes Compatible 64bit
USB Delock 61889 Bluetooth V4.0 dual mode USB adapter Delock Broadcom Works OOB including wake from sleep by Bluetooth device Tick.png

USB 3.0 Cards / Adapters

Type of Accessory Item Description Manufacturer Notes Compatible 64bit

Keyboard & Mouse

Wireless

Interface Item Description Manufacturer Model No Notes Compatible 64bit
Powered by MediaWiki © 2015 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   PHP hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers