HCL 10.9 Seeds

From OSx86
(Difference between revisions)
Jump to: navigation, search
(AMD/ATI)
 
(208 intermediate revisions by 69 users not shown)
Line 1: Line 1:
This is a component level hardware compatibility list for pre-release versions of Apple's Mac OS X Mavericks. As this is not the final release, compatibility may change throughout the builds, so please, do not rely on this list when buying hardware. It is for those who wish to share/experiment with pre-release versions of the OS. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.
+
This is a component level hardware compatibility list for pre-release versions of Apple's Mac OS X Mavericks. '''As this is not the final release, compatibility may change throughout the builds, so please, do not rely on this list when buying hardware'''. It is for those who wish to share/experiment with pre-release versions of the OS. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.
  
 
* ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.  
 
* ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.  
Line 8: Line 8:
  
 
''' You're looking for an Installation guide? see [[Installation_Guides#10.9_Guides|here]]'''
 
''' You're looking for an Installation guide? see [[Installation_Guides#10.9_Guides|here]]'''
 +
 +
==Motherboards==
 +
=== Abit ===
 +
{| class="wikitable" width=100%
 +
!Hardware Name
 +
!Chipset
 +
!Notes
 +
!Patches Used
 +
!colspan=2| Compatible 64bit
 +
|-
 +
|}
 +
 +
=== Asrock ===
 +
{| class="wikitable" width=100%
 +
!Hardware Name
 +
!Chipset
 +
!Notes
 +
!Patches Used
 +
!colspan=2| Compatible 64bit
 +
|-
 +
|FM2A75M-HD+
 +
|AMD A75
 +
| '''System Configuration:'''
 +
*CPU: AMD Athlon X4 750k
 +
*GPU: Asus GeForce GT 610 1GB
 +
*GPU: R7 260X Asus DirectCU II OC 2GB
 +
 +
Installed using Niresh's Mavericks .dmg, GPUs work seperately, of course.
 +
|Kernel panic fix through installer;
 +
|{{Y}}
 +
|-
 +
|P45R2000 WiFI
 +
|Intel® P45 + ICH10R chipset
 +
|No special Patching. 
 +
|Clover r2165 no dsdt
 +
|{{Y}}
 +
|-
 +
|G31M-S
 +
|Intel® G31 + ICH7 Chipsets
 +
|Updated Bios Firmware to v2.10
 +
""Bios Settings:""
 +
*System Default
 +
*(USB) USB 2.0 Support Disabled
 +
*(CPU) No-Execute Memory Protection Enabled
 +
*(ACPI) ACPI HPET Table Enabled
 +
""DMG File:""
 +
*Niresh-Mavericks
 +
""USB/HDD Installer""
 +
(If your using a USB for this look up "hackintosh slow usb" first. Massive speed diff, 3h to 30m diff)
 +
*open Disk Utility, select HDD/USB you want as the installer
 +
(i had better luck with "spare" HDD)
 +
*Options = GUID
 +
*Format to Mac OS Extended (journaled)
 +
*Now Format it
 +
*Select HDD/USB and select restore tab
 +
*Mount the DMG file (Niresh-Maverics)
 +
*use as source and select/drag your USB/HDD to destination
 +
*Click Restore
 +
*Use Chameleon and select the HDD/USB
 +
*Now boot from your new Installer USB/HDD
 +
(After installing you can change back the USB 2.0 Support in the bios as this OS X supports it)
 +
|No
 +
|{{Y}}
 +
|-
 +
|Z68 Extreme4
 +
|Intel Z68
 +
|'''System Configuration:'''
 +
* CPU: Intel i5-2500
 +
* GPU: Nvidia GTS 250 1gb (Intel 3000 onboard works too)
 +
'''Component Status:'''
 +
* Audio works with ALC892 kext. Sometimes makes a pop sound when been silent for long duration: http://www.osx86.net/files/file/68-alc892-nodsdt-10-9/
 +
* Ethernet works with BCM57781 kext. Won't work out-of-box, but flawless once kext installed: http://www.osx86.net/files/download/140-bcm57781-10-9-dp2/
 +
* Sleep does not work
 +
'''Installed fresh 10.9 GM. Had separate 10.8.3 already working (see wiki page).'''
 +
<br>I simply followed the instructions here and was able to reach installer Vanilla style. After that a few kexts, DSDT, boot loader, and you're good to go:
 +
#http://www.insanelymac.com/forum/topic/280756-guide-the-all-in-one-guide-to-vanilla-os-x-including-chameleon-dsdt-for-beginners-updated-for-mavericks/
 +
* BIOS: As was with 10.8, 10.9 still requires an updated BIOS. You need to flash your mobo BIOS with the patched 2.20 version to be able to install and boot OSX 10.8.x. This is because as of 10.8 the NullCpuPowerManagment.kext is rendered useless, which means you cannot boot. The patched BIOS will fix this permanently, meaning you wont even need a replacement .kext. Read about it and download the file here:
 +
# http://bios.zmac.net/asrock/Asrock-Z68-Extreme4-220_modified.zip
 +
# Source of BIOS patches: http://biosrepo.wordpress.com/asrock/z68/
 +
* DSDT: You can install and run OSX without a DSDT, but it is unstable and has odd issues (sometimes boot without USB working, no sleep, etc). Put this file in your /Extra/ folder and reboot to fix.
 +
# Search tonymac x86.com because insanelymac will not let me directly link. Just search for Z68 Extreme 4 DSDT you'll find it.
 +
* SMBIOS: Pick the Macmini5,1 option, as it is most closely related to your mobo.
 +
* Cloning: Speaking of which, once you get to your desktop, I highly recommend making a clone to another partition/USB drive of your hard work so far. I had to reclone 4 times during the process from making mistakes, and my clone image saved me many hours. Use CCC (Carbon Copy Cloner) or your favorite app.
 +
* Booting: Just use the bootloader (Chameleon v2.2 r2265). If you used 10.8 before this, also copy over your /Extras/ folder to the new 10.9 (both installer partition, and installed-to partition) for the DSDT, smbios, .plist, etc.
 +
# File is included in the "Essentials" zip file located in the first link for instructions on how to install Vanilla style above.
 +
* Graphics: For installation of OSX, you will *need* to have your Intel Integrated Graphics 3000 plugged into a monitor directly. Tell the BIOS to use "Onboard" video (in Northbridge section). This is required for OSX installation and first boot.
 +
# After install, if you are staying on Onboard graphics, change nothing. If you are installing your own graphics card, you may have to install your own .kext files for it (do your research).
 +
# After getting your graphics card working, if you are getting long boot-times, try booting with -v and watch where it hangs. If it says "SNB Framebuffer did not show up, unload" then you will need to simply delete all the .kext files named AppleIntelHD3000Graphics (should be 3 or 4 of them). This will tell OSX to stop trying to load from the onboard graphics, which fixes the "SNB Framebuffer" long boot time issue.
 +
* App Store Login Issue: If you're trying to login to the App Store, or use apps downloaded through the App Store, and you get the "An Unknown Error Has Occurred"
 +
# Simply delete this file, empty the trash, and reboot. You'll need to open System Preferences > Network and add your Ethernet connection again manually. Then it all works!
 +
# ./Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
 +
|
 +
Chameleon v2.2 r2265; BIOS patch; SMBIOS; DSDT & SSDT; Audio and Ethernet Kexts
 +
|{{Y}}
 +
|}
 +
 +
=== Asus ===
 +
{| class="wikitable" width=100%
 +
!Hardware Name 
 +
!Chipset
 +
!Notes
 +
!Patches Used
 +
!colspan=2| Compatible 64bit
 +
|-
 +
|P5QL-PRO[http://http://www.asus.com/Motherboards/P5QL_PRO/]
 +
|Intel® P43 + ICH10 chipset
 +
|'''System Configuration:'''
 +
*CPU: Intel Core 2 duo E6550
 +
*GPU: EVGA GeForce 8400gs 512 MB
 +
*RAM: 3x2GB DDR2 '''Components Status:'''
 +
*EVGA GeForce 8400gs 512 MB OOB
 +
*ALC1200 KEXT [http://www.insanelymac.com/forum/topic/161430-realtek-alc1200-ich10-working-kext-on-mountain-lion-and-snow-leopard/]
 +
*Lan AttansicL1eEthernet.kext
 +
* works, shutdown, restart
 +
'''Install method:'''
 +
* myhack 3.2BETA8
 +
|'''Patches:'''
 +
*Latest Chameleon Bootloader
 +
|{{Y}}
 +
|-
 +
|[http://www.asus.com/Motherboards/P5QPLAM/ P5QPL-AM]
 +
|Intel® G41 + ICH7 chipset
 +
|'''System Configuration:'''
 +
*CPU: Intel Core 2 duo E6300
 +
*GPU: Shapphire hd5450 1024 MB
 +
*RAM: 2x2GB DDR2 corsair
 +
'''Components Status:'''
 +
*AMD Radeon HD 5450 works with edit id 68f9 on AMDRadeonX3000.kext, ATI5000Controller.kext
 +
* audio voodoohda 2,82
 +
*Lan AttansicL1eEthernet.kext
 +
* works, shutdown, restart
 +
'''Install method:'''
 +
* myhack
 +
* boot with  -v GraphicsEnabler=No
 +
|'''Patches:'''
 +
*Latest Chameleon Bootloader
 +
|{{Y}}
 +
|-
 +
|[http://www.asus.com/Motherboards/P8Z68V_LE/ P8Z68V-LE]
 +
|Z68
 +
|'''System Configuration:'''
 +
*CPU: Intel Core i7  3.41 GHz
 +
*GPU: ATI Radeon HD 5000 1024 MB
 +
*RAM: 4x4GB DDR3 Kingston
 +
*Keyboard: Generic USB Keyboard
 +
*Mouse: Generic USB Mouse
 +
'''Components Status:'''
 +
*All works, sleep, wakeup, shutdown, restart, speedstep, Updates Through MacAppStore
 +
*ATI Radeon HD 5000 works OOB
 +
'''Install method:'''
 +
*[http://www.insanelymac.com/forum/topic/289062-109-mavericks-simple-vanilla-hackintosh-install-guide/ Tutorial]
 +
* -v -x -f for instalation
 +
* -v (dart=0 fault) post Instalation
 +
|'''Patches:'''
 +
*Latest Chameleon Bootloader
 +
*Kexts (FakeSMC, NullCPUPowerManagement, LNX2Mac's Realtek RTL81xx for LAN, non DSDT Realtek ALC 892 for Sound)
 +
*[http://biosrepo.wordpress.com/asus/z68/ Modded Bios]
 +
|{{Y}}
 +
|-
 +
|[http://www.asus.com/Motherboards/P8Z68M_PRO/ P8Z68M-Pro]
 +
|Z68
 +
|'''System Configuration:'''
 +
*CPU: Intel Core i5 2400 @ 3.1GHz
 +
*GPU: XFX Radeon HD 6870 1024 MB
 +
*RAM: 2x4GB DDR3 G.SKILL CL9 RipjawsX
 +
*Keyboard: Apple Keyboard
 +
*Mouse: Logitech MX518
 +
'''Components Status:'''
 +
*All works, sleep, wakeup, shutdown, restart, speedstep, Updates Through MacAppStore
 +
*AMD Radeon HD 6870 works OOB with GraphicsEnabler=Yes
 +
'''Install method:'''
 +
*[http://thetecherra.com/2012/02/17/tutorial-run-os-x-mountain-lion-10-8-on-a-pc-hackintoshosx86-from-start-to-finish/ Tutorial]
 +
|'''Patches:'''
 +
*Latest Chameleon Bootloader
 +
*Kexts (FakeSMC, LNX2Mac's Realtek RTL81xx for LAN)
 +
*DSDT and SSDT, smbios.plist from iMac 12,2
 +
*Patched AICPUPM.kext (Lion 10.7.3) for Speedstep from InsanelyMac
 +
*[http://biosrepo.wordpress.com/asus/z68/ Modded Bios for P8Z68-M Pro]
 +
|{{Y}}
 +
|-
 +
|[http://www.asus.com/Motherboards/P8Z68V_PRO/ P8Z68V-PRO]
 +
|Z68
 +
|'''System Configuration:'''
 +
*CPU: Intel Core i7 2600K @3.4GHZ
 +
*GPU: NVIDIA Gainward GTX670 phantom 2GB
 +
*RAM: 2x4GB DDR3 Kingston hyperx genesys
 +
*Keyboard: Microsoft sidewinder X6
 +
*Mouse: Microsoft 3-click usb mouse
 +
'''Components Status:'''
 +
*All works, sleep, wakeup, shutdown, restart, sound, lan, qe/ci
 +
*GTX 670 works OOB
 +
'''Install method:'''
 +
*[http://www.insanelymac.com/forum/topic/289062-109-mavericks-simple-vanilla-hackintosh-install-guide/ Tutorial]
 +
* -v -f kernel flags
 +
|'''Patches:'''
 +
*Chameleon Bootloader(from the tutorial)
 +
*Kexts:FakeSMC, NullCPUPowerManagement, Intel hnak's AppleIntelE1000, non DSDT Realtek ALC 892 sound
 +
*smbios from imac12,2
 +
*DSDT and SSDT
 +
*It doesn't boot without the -f flag
 +
|{{Y}}
 +
|-
 +
|[http://www.asus.com/Motherboards/ P5KVM]
 +
|Intel G33 + ICH9R
 +
|'''System Configuration:'''
 +
*MAINBOARD: P5K V-M
 +
*CPU: Intel Q6600 CPU 2.24 GHz @ 2.76 GHz
 +
*GPU: MSI 8500GT (512MB)OTB dual monitor, monitor 1 DVI monitor 2 VGA
 +
*RAM: 4x2GB 800 MHz Crucial
 +
'''Components Status:'''
 +
*Audio - Built-in works 
 +
*Ethernet - Works
 +
*USB - All Work
 +
*SATA - All Work
 +
*IDE - Works
 +
*Firewire - works
 +
*Wireless - DW 1515 Recognised from install instantly and in system profiler as third party card Airport ready.
 +
*iCloud - App Store - iMessage - iCloud Keychain all work 
 +
*Bluetooth- Dlink DBT 122 via usb
 +
*Apple Trackpad Works-100% All Gestures Available
 +
*ShutDown, Restart, Working 100 % .
 +
'''Install method:'''
 +
*Install from 8GB USB using this method http://www.osx86.net/10-9-mavericks/23250-boot-usb-os-x-mavericks-10-9-dp-pkg.html, No DSDT needed for install. Update to 10.9 dp2-dp3-dp4-dp5-dp6-dp7-dp8- via software update fresh install for GM
 +
|'''Patches:'''
 +
* Marvell88E8056.kext AppleHDA.kext HDAEnabler by Taruga. IOAHCIBlockStorageInjector.kext AHCIPortInjector stops hdd showing as external with orange icons
 +
*Chameleon-2.2 svn-r2246.pkg
 +
*[http://g60jx-hackintosh.googlecode.com/files/Kext%20Helper%20b7.zip Kext Helper b7]
 +
|{{Y}}
 +
|-
 +
|[http://www.asus.com/Motherboards/P5B_SE/ P5B SE]
 +
|Intel P965
 +
|'''System Configuration:'''
 +
*MAINBOARD: P5B SE
 +
*CPU: Intel Q6600 CPU 2.24 GHz @ 2.88 GHz
 +
*GPU: Nvidia (MSI) Gt220 1GB (DVI-HDMI-RGB)
 +
*Multi-Monitor Working OOB,
 +
*RAM: 4x2GB 800 MHz Crucial
 +
'''Components Status:'''
 +
*Audio - Built-in Realtek ALC883 (Not Working Yet)
 +
*Ethernet - Attansic L1(Working By pkg install) Works
 +
*USB - All Work, USB x10 [6Front + 4back] (All Working, Disabled EHCi Hand Off),
 +
*SATA - All Work
 +
*250GB HDD x4,
 +
*LG Multi Drive DVD Writer: Raid Port as ACHI,
 +
*IDE - Not Tested
 +
*Wireless - TP-Link TL-WDN4800 2.4ghz + 5Ghz (a,b,g,n)
 +
(TP-LINK TL-WDN4800 Dual Band Wireless N900 PCI Express Adapter) (Working OOB), AirDrop + Airport Works.
 +
*iCloud - Not Signing in.
 +
*App Store - Works.
 +
*iMessage Works.
 +
*Apple USB Keyboard, Apple USB Mouse Works-100% All Gestures Available.
 +
*ShutDown (ATX not going off), Restart, Working 100 % .
 +
*USB 2.0 Camera (Works in All Apps),
 +
'''Install method:'''
 +
*myHack 3.2 BETA 8, No DSDT needed for install. Update to 10.9 dp2-dp3-dp4-dp5-dp6 via software update.
 +
|'''Patches:'''
 +
* Attansic L1.pkg
 +
|{{Y}}
 +
|-
 +
|[http://www.asus.com/Motherboards/P5G41TM_LX/ P5G41T-M LX]
 +
|Intel® G41 /ICH7
 +
|'''System Configuration:'''
 +
*MAINBOARD: P5G41T-M LX V2
 +
*CPU: Intel E5500 CPU 2.80 GHz
 +
*GPU: Ati (Asus) 5570 1GB (DVI-HDMI-RGB) - Worked OOB
 +
*Multi-Monitor Working OOB,
 +
*RAM: 8GB 1066MHz Kingston
 +
'''Components Status:'''
 +
*Audio - Built-in ALC887 (Patched VoodooHDA) - Works
 +
*Ethernet - Atheros Gb LAN - Worked OOB
 +
*USB - All Work
 +
*SATA - All Work
 +
*64GB ADATA SSD
 +
*IDE - Not Tested
 +
*App Store - Works.
 +
*iMessage Works.
 +
*ShutDown, Restart, Working 100 % .
 +
'''Install method:'''
 +
*No DSDT just Chameleon
 +
|'''Patches:'''
 +
* Patched VoodooHDA
 +
|{{Y}}
 +
|-
 +
|[https://www.asus.com/au/Motherboards/P8H61M_LX3_R20 P8H61-M LX3 R2.0]
 +
|Intel® H61(B3)
 +
|'''System Configuration:'''
 +
*MAINBOARD: P8H61-M LX3 R2.0
 +
*CPU: Intel Core i3-3220
 +
*GPU: (Asus) Geforce GT 610 1GB (DVI-HDMI-RGB) - Worked OOB
 +
*Multi-Monitor Working OOB,
 +
*RAM: 6GB 1333MHz Kingston
 +
'''Components Status:'''
 +
*Audio - VIA VT1708S (Patched VoodooHDA) - Works
 +
*Ethernet - Realtek RTL8111F  Glan- (Patched RealtekRTL8111.kext) Work
 +
*USB - All Work
 +
*SATA - All Work
 +
*IDE - Not Tested
 +
*GM 13A603 And Update DP1/DP8 - Works.
 +
*ShutDown, Restart, Working 100 % .
 +
'''Install method:'''
 +
*Myhack 3.2BETA8
 +
|'''Patches:'''
 +
* Patched VoodooHDA
 +
* Patched RealtekRTL8111.kext
 +
|{{Y}}
 +
|-
 +
|[http://www.asus.com/Motherboards/ P5K]
 +
|Intel P35 + ICH9
 +
|'''System Configuration:'''
 +
*MAINBOARD: P5K crossflashed to P5KR
 +
*CPU: Intel Q6600 CPU 2.4 GHz
 +
*GPU: Asus 8800GT (512MB)OTB
 +
*RAM: 3x2GB 800 MHz
 +
'''Components Status:'''
 +
*Audio - ALC 883 patch from [http://www.osx86.net/files/file/674-applehda-kext-for-alc883-mountain-lion-version] works
 +
*Ethernet - Works with AttansicL1 ethernet.pkg (Not with Kext)
 +
*USB - All Work
 +
*SATA - All Work
 +
*IDE - Works with JmicronATA.kext
 +
*Firewire - works, somewhat unstable
 +
*Wireless - None
 +
*iCloud - App Store - iMessage - iCloud Keychain with fiximessage.zip patch
 +
*Bluetooth- None
 +
*ShutDown, Restart works with OSXRestart.kext
 +
*Sleep, Wake Up, Hibernation works with DSDT patch (using Chameleon Wizard)
 +
'''Install method:'''
 +
*System didn't work with myhack, so used tonymacx86 guide with External USB HDD. Deleted IOBluetoothHID.kext Install boot flags -v -x PCIRootUID=0 npci=0x2000 GraphicsEnabler=Yes
 +
|'''Patches:'''
 +
* LegacyYukon.kext AppleHDA.kext HDAEnabler.kext
 +
JmicronATA.kext
 +
And all other kexts from previous P5K 10.6 installations
 +
*with no VoodooHDA
 +
*Chameleon patch with Chameleon Wizard
 +
*DSDT, kexts except mentioned were from [http://wiki.osx86project.org/wiki/index.php/HCL_10.6.5#Asus]
 +
|{{Y}}
 +
|-
 +
|}
 +
 +
=== Biostar ===
 +
{| class="wikitable" width=100%
 +
!Hardware Name
 +
!Chipset
 +
!Notes
 +
!Patches Used
 +
!colspan=2| Compatible 64bit
 +
|-
 +
|G41d3+ version 0
 +
|Intel G41 / ICH7
 +
|'''System Configuration:'''
 +
* CPU-Intel CORE 2 DUO 2,13Ghz DUAL CORE
 +
* Graphics ATI Radeon HD 5770
 +
* 2x 4 GB 1333 Mhz DDR3 KINGSTON Ram
 +
* 8x Lg DVD/CD RW
 +
* 1x 500GB (OSX MAVERIKS)
 +
* 1x 2TB Stuff
 +
|
 +
'''Install:'''
 +
* OS X 10.8 b1 with [http://myhack.sojugarden.com myHack]
 +
* Install then update to 10.9 b2
 +
 +
'''Onboard Ethernet:'''
 +
[http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=7&PFid=7&Level=5&Conn=4&DownTypeID=3&GetDown=false# RTGMac]
 +
 +
search for RTGMac_v2.0.6 and take this " MacOS 10.6 on Intel-based Mac computer " version
 +
*'''Sound'''
 +
**onboard with Voodoohda
 +
|{{Y}}
 +
|-
 +
|}
 +
 +
=== ECS ===
 +
{| class="wikitable" width=100%
 +
!Hardware Name
 +
!Chipset
 +
!Notes
 +
!Patches Used
 +
!colspan=2| Compatible 64bit
 +
|-
 +
|945GCT-M 1333 V3.0
 +
|Intel® 945GC
 +
|'''System Configuration'''
 +
:* CPU: Intel Pentium Dual Core E5800 3.2Ghz
 +
:* RAM: 2 x 2 GB DDR2 6400
 +
:* Graphic: Leadtech NVIDIA Geforce 8600GT 256MB
 +
:* LAN: Realtek® RTL8101E 10/100 LAN (co-lay 8111B)
 +
:* Audio: IDT 92HD202 6-channel High Definition Audio Codec
 +
:* HDD: WD 500GB SATA
 +
:* DVD Drive: LITE-ON DVD-RW
 +
|'''Installation method:'''
 +
Use flashdrive with Mavericks created by MyHack<br />
 +
1. Boot from the USB. Used kernel flags  "-v -f npci=0x3000 PCIRootUID=0" or else got a garbled screen.<br />
 +
2. Format a partition as Mac OS X Extended (Journaled) in Disk Utility<br />
 +
3. Apply generic myhack fix<br />
 +
4. Reboot after installation<br />
 +
5. Install RTL81XX, VoodooHDA 2.8.2 (2.8.4 did not work for me)<br />
 +
6. Added kernel flags "-v -f npci=0x3000 PCIRootUID=0" to /Extra/org.chameleon.Boot.plist<br />
 +
7. Disabled computer sleep in power management, as I wasn't confident about sleep, and I do not care about sleep.<br />
 +
|{{Y}}
 +
|-
 +
|}
 +
 +
=== EVGA ===
 +
{| class="wikitable" width=100%
 +
!Hardware Name
 +
!Chipset
 +
!Notes
 +
!Patches Used
 +
!colspan=2| Compatible 64bit
 +
|-
 +
|}
 +
 +
=== Foxconn ===
 +
{| class="wikitable" width=100%
 +
!Hardware Name
 +
!Chipset
 +
!Notes
 +
!Patches Used
 +
!colspan=2| Compatible 64bit
 +
|-
 +
|}
 +
 +
=== Gigabyte ===
 +
{| class="wikitable" width=100%
 +
!Hardware Name 
 +
!Chipset
 +
!Notes
 +
!Patches Used
 +
!colspan=2| Compatible 64bit
 +
|-
 +
|GA-EX58-UD3R
 +
|X58
 +
|'''System Configuration:'''
 +
*CPU: Intel Core i7 920 @ 2.8GHz
 +
*GPU: EVGA GTX660 Ti 2GB
 +
*RAM: 3x2GB Corsair 1600MHz DDR3
 +
*DSDT from Tonymacx86
 +
'''Components Status:'''
 +
*Everything works
 +
'''Install method:'''
 +
* USB flash drive
 +
|'''Patches:'''
 +
*Chameleon
 +
*Used EFIStudio to fix iCloud, App Store and iMessages
 +
*Kexts (FakeSMC, ALC888 Legacy (with DSDT), Realtek AppleRTL8169Ethernet, 3rd Party SATA - For GSata ports, Trim Enabler and AppleRTC Patch (to prevent bios resets)
 +
*smbios.plist from MacPro5,1 with custom serial
 +
|{{Y}}
 +
|-
 +
|GA-G31-ES2l rev 1.x
 +
|Intel® G31 Chipset
 +
|'''System Configuration:'''
 +
* CPU:  Intel Pentium E5200 @2,5Ghz
 +
* GPU: Asus GeForce GT610 1024MB DDR3
 +
* RAM: Kingston DDR2 800Mhz 1GB
 +
* HDD: Maxtor 7200rpm 40GB IDE
 +
'''Component Status:'''
 +
* Shutdown {{Y}}
 +
* Restart {{Y}}
 +
* Sleep {{Y}}
 +
* USB 2.0 {{Y}}
 +
* Ethernet {{Y}}
 +
* Video {{Y}} DVI -No Tested VGA & HDMI
 +
* Audio {{Y}}
 +
|'''BIOS changes:
 +
* Mode 64Bits
 +
'''Installation Method:
 +
* USB flash drive + Niresh Distro
 +
* Boot with -v to install. once installed boot up again with -v -x
 +
* Default settings
 +
* GO! :)
 +
|{{Y}}
 +
|-
 +
|[http://www.gigabyte.us/products/product-page.aspx?pid=3973#ov GA-Z68X-UD3H-B3]
 +
|Z68
 +
|'''System Configuration:'''
 +
*CPU: Intel Core i5 2500K @ 3.3GHz
 +
*GPU: Gigabyte GeForce GT 430 1024 MB
 +
*RAM: 2x4GB DDR3 Corsair
 +
*UEFI BIOS U1L (no DSDT)
 +
'''Components Status:'''
 +
*All works
 +
*USB 3.0 not tested (Etron EJ168)
 +
'''Install method:'''
 +
*[http://www.insanelymac.com/forum/topic/289062-109-mavericks-simple-vanilla-hackintosh-install-guide/ Tutorial]
 +
|'''Patches:'''
 +
*Chameleon 2.2 SVN-R2246
 +
*Kexts (FakeSMC, NullCPUPowerManagement, ALC889 (without DSDT) & LNX2Mac's Realtek RTL81xx)
 +
*SSDT, smbios.plist from MacPro3,1
 +
|{{Y}}
 +
|-
 +
|[http://www.gigabyte.us/products/product-page.aspx?pid=3449#ov GA-X58A UD3R]
 +
|X58 ICH10R
 +
|'''System Configuration:'''
 +
*CPU: Intel Core i7 950 @ 3,02 Ghz
 +
*GPU: Sapphire Radeon HD 5850 1024 MB
 +
*RAM: 3*2GB DDR3 Corsair XMS3
 +
 +
'''Install method:'''
 +
*[http://www.insanelymac.com/forum/topic/289062-109-mavericks-simple-vanilla-hackintosh-install-guide/ Tutorial]
 +
*[http://freetexthost.com/oagwm66u1u my tutorial]
 +
|'''Patches:'''
 +
*Chameleon 2.2 SVN-R2246
 +
*Kexts (FakeSMC, NullCPUPowerManagement (or get a KP), ALC889a use for now voodooHDA 0.2.56, IOAHCIBlockStorageInjector.kext, RealtekRTL81xx.kext, AppleACPIPS2Nub.kext and ApplePS2Controller.kext (only if u use PS/2), PXHCD.kext, ApplePCIIDE.kext
 +
*smbios.plist from MacPro5,1
 +
'''Components Status and Installation Info:'''
 +
*Audio, Ethernet, PS/2 works with kext, DVI-HDMI works (GraphicsEnabler=Yes), shutdown/restart e sleep work, USB 3.0 work with PXHCD.kext (LaiCe) IDE/PATA work with ApplePCIIDE.kext
 +
*IMPORTANT: use this kernel flags for start OS X "-f npci=0x2000" or get Error with IOBluetoothHCIController
 +
*If u get a problem in the installer before the installation, replace the OSinstall.mpkg with [http://www.osx86.net/view/3958-mavericks_mbr_patch.html This]
 +
Test with Golden Master and one problem found (sleep work but get CMOS reset, and abnormal speed clock after wake up)
 +
|{{Y}}
 +
|-
 +
|[http://www.gigabyte.com/products/product-page.aspx?pid=3500#ov GA-G41-ES2L]
 +
|G41
 +
|'''System Configuration:'''
 +
*CPU: Intel Pentium Dual Core
 +
*GPU: Asus GeForce GT 610 1024 MB
 +
*RAM: 2x2GB DDR2 Kingston
 +
'''Components Status:'''
 +
*All seems to work (sleep works) all updates are done from DP1 to DP7 it is working like a charm
 +
 +
'''Install method:'''
 +
*[http://www.insanelymac.com/forum/topic/289062-109-mavericks-simple-vanilla-hackintosh-install-guide/ Tutorial]
 +
|'''Patches:'''
 +
*Chameleon 2.2 SVN-R2246
 +
*Kexts (FakeSMC, NullCPUPowerManagement, RealtekR1000SL)
 +
*SSDT, smbios.plist from MacPro3,1
 +
 +
'''Components Status and Installation Info:'''
 +
 +
* audio : install ( Drivers -> Audio -> ALC8800 -> '''without dsdt √''' '''alc887 / 888b''' -> '''v100202 Legacy''' ) reboot and you'll have speakers & Mic working
 +
* GT610 works OOB
 +
|{{Y}}
 +
|-
 +
|[http://www.gigabyte.com/products/product-page.aspx?pid=2919#ov GA-EP45-UD3P Rev 1.0]
 +
|P45
 +
|'''System Configuration:'''
 +
*CPU: Intel Core 2 Quad Q6600
 +
*GPU: Gigabyte GeForce GT 220 1024 MB
 +
*RAM: 4x2GB DDR2
 +
*BIOS: F10 (w/ Patched DSDT from 10.8)
 +
'''Components Status:'''
 +
*QE/CI Works.
 +
*Sound doesn't work. No AppleHDA available yet and I hate VoodooHDA.
 +
*Ethernet Ports stop working after a bit (few minutes)
 +
 +
'''Install method:'''
 +
*MyHack 3.2 Beta 2 + Replacement of DSDT.AML and known working boot.plist
 +
|'''Patches:'''
 +
*Chameleon 2.2 SVN-R2246
 +
*Kexts (FakeSMC, NullCPUPowerManagement)
 +
*No SSDT, smbios.plist from MacPro3,1
 +
|{{Y}}
 +
|-
 +
| GA-Z77-DS3H rev 1.1
 +
|Z77-DS3H rev 1.1
 +
|'''System Configuration:'''
 +
*CPU: Intel Core i3-3225 @ 3.4GhZ
 +
*GPU: MSI Radeon HD 6570 2GB
 +
*RAM: 2x4GB DDR3 1600 Crucial
 +
*UEFI BIOS F9 (no DSDT)
 +
'''Components Status:'''
 +
*All works
 +
'''Install method:'''
 +
*[http://www.insanelymac.com/forum/topic/289062-109-mavericks-simple-vanilla-hackintosh-install-guide/ Tutorial]
 +
|'''Patches:'''
 +
*Chameleon 2.2 SVN-R2246
 +
*Kexts (FakeSMC, NullCPUPowerManagement, ALC887 (without DSDT) & ALXEthernet.kext for AR8161)
 +
*SSDT, smbios.plist from iMac mid 2011
 +
|{{Y}}
 +
|-
 +
|[http://www.gigabyte.ru/products/page/mb/ga-z77-ds3hrev_11/#ov GA-Z77-DS3H rev 1.1]
 +
|Z77-DS3H rev 1.1
 +
|'''System Configuration:'''
 +
*CPU: Intel Core i5-3570 @ 3.4GhZ
 +
*GPU: ASUS GTX660 2GB
 +
*RAM: 4x4GB DDR3 1600 Samsung
 +
*UEFI BIOS F9 (no DSDT)
 +
'''Components Status:'''
 +
*All works
 +
'''Install method:'''
 +
*[https://applelife.ru/threads/ustanovka-os-x-mavericks-10-9-x-na-pc.42133/ Tutorial]
 +
|'''Patches:'''
 +
*Clover v2 r2652
 +
*Kexts (FakeSMC, ALC887 (Clover patch AppleHDA) & ALXEthernet.kext for AR8151)
 +
*smbios.plist from MacPro 6,2
 +
|{{Y}}
 +
|-
 +
|[http://www.gigabyte.com/products/product-page.aspx?pid=2842#ov GA-EP45-DS3R rev.1.0]
 +
|P45
 +
|'''System Configuration:'''
 +
*CPU: Intel Core 2 Duo E7500 @ 2.93Ghz
 +
*GPU: Galaxy Nvidia 8400GS 512 DDR3
 +
*RAM:1x4GB Corsair DDR2 800Mhz
 +
'''Components Status:'''
 +
*All works
 +
'''Install method:'''
 +
* [http://www.macbreaker.com/2013/06/how-to-install-os-x-109-mavericks-dp1.html myHacks]
 +
*Updated to 10.9 DP6
 +
|'''Patches:'''
 +
*Chameleon 2.2 SVN-R2246
 +
*Kexts (FakeSMC, NullCPUPowerManagement)
 +
*Sound ALC889A works with (ALC885/889A)
 +
*LAN work With LNX2Mac's Realtek RTL81xx
 +
*smbios.plist from old OS X
 +
|{{Y}}
 +
|-
 +
|[http://www.gigabyte.com/products/product-page.aspx?pid=2615#ov P31-DS3L]
 +
|P31
 +
|'''System Configuration:'''
 +
* CPU: Intel Core 2 Duo E7200 @ 3.06Ghz
 +
* GPU: ASUS Radeon HD5670 512 DDR3
 +
* RAM: 2X2GB Kingmax DDR2 1020Mhz
 +
'''Components Status:'''
 +
* All works
 +
'''Install method:'''
 +
* Retail Install from USB HDD
 +
* Updated to 10.9 GM
 +
|
 +
*  BIOS ver.: F10
 +
* Chameleon ver.: 2255
 +
* Kexts: FakeSMC, RadeonX, ITEIT87x, IntelCPUMonitor, ICHSMBus, LegacyAGPM
 +
* Sound ALC888 and Radeon HDMI audio works with codec id 888 and [http://oandras.hu/downloads/6raWFLHl#ov AppleHDA.kext]
 +
* LAN works With RealtekRTL81xx.kext
 +
* smbios.plist: macpro5,1
 +
|{{Y}}
 +
|-
 +
|[http://www.gigabyte.com/products/product-page.aspx?pid=3013#ov EP45-UD3R]
 +
|P45
 +
|'''System Configuration:'''
 +
* CPU: Intel Core 2 Quad Q8550 @ 2.83Ghz
 +
* GPU: Gainward NVIDIA GT-9500 512 DDR3
 +
* RAM: 2X2GB Adata Vietesta DDR2 1333Mhz
 +
* installed on Adata 64GB SataII SSD
 +
'''Components Status:'''
 +
* All works so far, even dual full hd monitors
 +
'''Install method:'''
 +
*I had to borrow my friends MBPro to prepare USB Installer
 +
|
 +
*  BIOS ver.: F11
 +
* GraphicsEnabler=Yes PCIRootUID=1
 +
* Kexts: FakeSMC, IntelCPUMonitor, ICHSMBus,
 +
* Sound ALC888
 +
* LAN worked by first launching but I installed RealtekRTL81xx.kext
 +
* smbios.plist: macpro4,1
 +
|{{Y}}
 +
|-
 +
|}
 +
 +
=== Intel ===
 +
{| class="wikitable" width=100%
 +
!Hardware Name
 +
!Chipset
 +
!Notes
 +
!Patches Used
 +
!colspan=2| Compatible 64bit
 +
|-
 +
|Intel DG31PR
 +
|Intel G31
 +
|'''System configuration:'''
 +
* Intel Core 2 Duo E7400
 +
* Intel G31 chipset
 +
* HDD: Hitachi HDS721010CLA332 (1TB)
 +
* RAM: 2x 2GB Kingston DDR2 800
 +
* NVIDIA GeForce GT240 1GB GDDR5 (GraphicsEnabler)
 +
* Audio ALC888 (Using [http://www.insanelymac.com/forum/topic/285266-voodoohda-with-fix-for-random-kp/ VoodooHDA v2.8.2d6])
 +
* RTL8111GR integrated Gigabit Ethernet ([http://www.insanelymac.com/forum/topic/286937-realtekr1000-v3/ R1000SL kext] courtesy of Slice)
 +
 +
|'''Installation method:'''
 +
* Mountain Lion 10.9 Golden Master
 +
* Used MyHack 3.2 Beta 8, HWSensors and VoodooHDA
 +
* Changed Mac model identifier to iMac10,1 using Champlist (as leaving the serial number to SOMESRLNMBR or something like that just doesn't look legit)
 +
 +
'''Working:'''
 +
* Shutdown/Reboot
 +
* Mac App Store/iBooks (with the ethernetbuiltin=yes fix)
 +
* Graphics acceleration (2D/3D)
 +
* Most applications including Adobe Premiere, Photoshop and the like
 +
 +
'''Known issues:'''
 +
* Sleep mode may not work as with previous setups
 +
* VoodooHDA needs some fixing, especially with humming noise
 +
|{{Y}}
 +
|-
 +
|}
 +
 +
=== Intel ===
 +
{| class="wikitable" width=100%
 +
!Hardware Name
 +
!Chipset
 +
!Notes
 +
!Patches Used
 +
!colspan=2| Compatible 64bit
 +
|-
 +
|Intel DG41RQ
 +
|Intel G31
 +
|'''System configuration:'''
 +
* Intel Core 2 Duo E7400
 +
* Intel G41 chipset
 +
* HDD: Hitachi HDS721010CLA332 (160 GB)
 +
* RAM: 2x 2GB Transcend DDR2 800
 +
* NVIDIA GeForce 210 1GB GDDR3 (GraphicsEnabler)
 +
* HDA: Realtek ALC662
 +
* NIC: Realtek RTL8111D
 +
 +
|'''Installation method:'''
 +
* Mountain Lion 10.9 Golden Master
 +
* Used MyHack 3.2 Beta 8, HWSensors and VoodooHDA
 +
* Chameleon Bootloader
 +
* [http://www.osx86.net/files/file/117-voodoohda-for-alc662/ VoodooHDA 2.8.2.kext]
 +
* [http://www.osx86.net/files/file/119-realtek-rtl8111-kext/ RealTek RTL8111.kext]
 +
* Changed Mac model identifier to iMac10,1 using Champlist (as leaving the serial number to SOMESRLNMBR or something like that just doesn't look legit)
 +
 +
'''Working:'''
 +
* Shutdown/Reboot
 +
* Mac App Store/iBooks (with the ethernetbuiltin=yes fix)
 +
* Graphics acceleration (2D/3D)
 +
* Most applications including Adobe Premiere, Photoshop and the like
 +
 +
'''Known issues:'''
 +
* Sleep mode may not work as with previous setups
 +
* VoodooHDA needs some fixing, especially with humming noise
 +
|{{Y}}
 +
|-
 +
|DG31PR
 +
|Intel G31 Express
 +
|'''System configuration:'''
 +
* CPU: Intel Core 2 Quad Q6600
 +
* GPU: XFX GeForce 8600 512 540
 +
* HDA: ALC888
 +
* NIC: Realtek RTL8111-GR
 +
* MEM: 1x 2 GB Kingston 800MHz DDR2 SDRAM
 +
|
 +
'''BIOS Settings:'''
 +
* Load Default settings
 +
* Boot Device set to Legacy & Automatic mode off
 +
* Enable USB Boot
 +
 +
'''Installation method:'''
 +
* myHack Install of Retail 10.9.0 USB w/extra boot.plist and -v flag to get in
 +
 +
'''Patches:'''
 +
* Patched AppleHDA audio, Lnx2Mac RealtekRTL81xx-0_0_90 ethernet installer, boot list with usb fix is needed in hack installer extra and pointed to when asked, no need of dsdt https://www.dropbox.com/s/oy2ozjnwamhu8q4/Hack%20Pro%20Intel%20DG31PR%20Mavericks%20Extra.zip
 +
 +
'''Working:'''
 +
* Shutdown/Reboot
 +
* DVD Player
 +
* USB 1 & 2 ports
 +
* card reader
 +
* VGA @ 1920x1080 no extension needed
 +
* audio back and front green plugs
 +
* sleep with apple kb (IntelCPUMonitor.kext)
 +
* stores
 +
* Same system for 10.6.8 and 10.8.4 stores are lost on 10.9.0 and on 10.9.1 also audio
 +
|{{Y}}
 +
|-
 +
|}
 +
 +
=== MSI ===
 +
{| class="wikitable" width=100%
 +
!Hardware Name
 +
!Chipset
 +
!Notes
 +
!Patches Used
 +
!colspan=2| Compatible 64bit
 +
|-
 +
|B75MA-P45
 +
|Intel® B75 Chipset
 +
|'''System Configuration'''
 +
:* CPU: Intel Pentium G840
 +
:* RAM: 2 x 4 GB DDR3 1333 MHz
 +
:* Graphic: ASUS NVIDIA Geforce 440GT 1GB
 +
:* LAN: Realtek® 8111E
 +
:* Audio: Realtek® ALC887
 +
:* HDD: SATA II SAMSUNG Spinpoint F1 HD322HJ 320GB 7200
 +
:* DVD Drive: SATA II LG GH22NS30
 +
|'''Installation method:'''
 +
Use flashdrive with Mavericks created by MyHack<br />
 +
1. Boot from the USB<br />
 +
2. Format a partition as Mac OS X Extended (Journaled) in Disk Utility<br />
 +
3. Reboot after installation<br />
 +
4. Install Lnx2Mac (network driver), select DSDT-Free and iMac 12,1 (system definitions)<br />
 +
5. Install kext for ALC887 (Current)<br />
 +
6. Install patched AppleIntelCPUPowerManagement and remove NullCPUPowerManagement from /Extra and MyHack.kext in /S/L/E<br />
 +
'''Works:'''<br />
 +
:*Everything is working!<br />
 +
:*Sleep fully working!
 +
|{{Y}}
 +
|-
 +
|Z68A-G45 B3
 +
|Intel® Z68 Chipset
 +
|'''System Configuration'''
 +
:* CPU: Intel Core I5 2500K
 +
:* RAM: 4 x 4 GB DDR3 1333 MHz
 +
:* Graphic: NVIDIA Geforce 560TI 1GB
 +
:* LAN: Realtek® 8111E
 +
:* Audio: Realtek® ALC887
 +
:* HDD: SATA II WD 250GB 7200
 +
:* DVD Drive: LG BDR
 +
|'''Installation method:'''
 +
Use flashdrive with Mavericks created by MyHack<br />
 +
1. Boot from the USB. Used -v -f boot flags<br />
 +
2. Format a partition as Mac OS X Extended (Journaled) in Disk Utility<br />
 +
3. Apply default myhack fix. Reboot.<br />
 +
4. Installed RTL81xx for Ethernet driver
 +
5. Installed VoodooHDA 2.8.2 audio driver<br />
 +
6. Disabled sleep in power management.
 +
'''Works:'''<br />
 +
:*Everything is working, except for sleep! (untested)<br />
 +
|{{Y}}
 +
|-
 +
|}
 +
 +
==Graphics Cards==
 +
Please specify if your card is PCI-E or Integrated.<br />
 +
Also, place chip and board manufacturer in their respective column.
 +
 +
===PCI-E===
 +
====AMD/ATI====
 +
{| class="wikitable" width="100%"
 +
!Model
 +
!Board-Manufacturer
 +
!Notes
 +
!QE/CI
 +
!Output
 +
!Dual display
 +
!colspan="2"| Compatible 64bit
 +
|-
 +
|[http://www.sapphiretech.com/presentation/product/?cid=1&gid=3&sgid=569&pid=189&psn=&lid=1&leg=0#.UGDwRFHRalY Radeon HD 4830]
 +
|Sapphire
 +
|
 +
*Using [http://www.insanelymac.com/forum/files/file/146-qe-ci-exotic-patch/ QE_CI Exotic patch]
 +
* Chameleon 2.0 RC5 (or the most recent) or PCEFI 10.6 Lion + Snow
 +
* GraphicsEnabler=Yes
 +
|{{Y}}
 +
|DVI / DVI
 +
|Not tested
 +
|{{Y}}
 +
|-
 +
|Radeon HD 4850 (EAH4850)
 +
|ASUS
 +
|
 +
* [http://www.insanelymac.com/forum/files/file/146-qe-ci-exotic-patch/ QE-CI Exotic patch (GM)]
 +
* Chameleon 2.2SVN
 +
* GraphicsEnabler=Yes
 +
|{{Y}}
 +
|DVI / DVI
 +
|Not tested
 +
|{{Y}}
 +
|-
 +
|Radeon HD 5450
 +
|Sapphire
 +
|
 +
*edit id 68f9 on AMDRadeonX3000.kext, ATI5000Controller.kext
 +
* Latest Chameleon Bootloader
 +
* GraphicsEnabler=Yes
 +
* remember in ATI5000Controller.kext put id in line Cedar Specs
 +
|{{Y}}
 +
|VGA / HDMI
 +
|Not tested
 +
|{{Y}}
 +
|-
 +
|[http://www.asus.com/Graphics_Cards/EAH5570DI1GD3LP/ ASUS EAH 5570 1GB]
 +
|AMD
 +
|
 +
Works OOB
 +
|{{Y}}
 +
|DVI / HDMI / VGA
 +
|Yes
 +
|{{Y}}
 +
|-
 +
|Radeon HD 5670
 +
|ASUS
 +
|
 +
* GraphicsEnabler=YES
 +
|{{Y}}
 +
|HDMI / DVI
 +
|OOB
 +
|{{Y}}
 +
|-
 +
|[http://www.sapphiretech.com/presentation/product/?cid=1&gid=3&sgid=643&pid=290&psn=&lid=1&leg=0 Radeon HD 5770]
 +
|Sapphire
 +
|
 +
*Using [http://www.osx86.net/downloads.php?do=file&id=3970 ATI5000Injector.kext]
 +
* GraphicsEnabler=No
 +
|{{Y}}
 +
|HDMI / DVI
 +
|Not tested
 +
|{{Y}}
 +
|-
 +
|[http://www.sapphiretech.com/presentation/product/?cid=1&gid=3&sgid=1073&pid=1190&psn=&lid=1&leg=0#.UGDy8lHRalY Radeon HD 6770]
 +
|Sapphire
 +
|
 +
*Using [http://www.insanelymac.com/forum/topic/282687-radeon-hd-6770-full-qeci-mountain-lion/?p=1902721 DSDT Inject method]
 +
* Chameleon 2.0 RC5 (or the most recent) or PCEFI 10.6 Lion + Snow
 +
* GraphicsEnabler => No more need!!!
 +
|{{Y}}
 +
|DVI / HDMI / VGA
 +
|Not tested
 +
|{{Y}}
 +
|-
 +
|Radeon HD 6870
 +
|Sapphire
 +
|
 +
*Using clover and AMDInjection=true
 +
|{{Y}}
 +
|HDMI / DVI / DP
 +
|OOB
 +
|{{Y}}
 +
|-
 +
|[http://www.amd.com/pl/products/desktop/graphics/7000/7770/Pages/radeon-7770.aspx Radeon HD 7770 GHz Edition 2GB]
 +
|AMD
 +
|
 +
Clover (v2k r2165)
 +
|{{Y}}
 +
|DVI / HDMI
 +
|Yes
 +
|{{Y}}
 +
|-
 +
|}
 +
 +
====NVIDIA====
 +
{| class="wikitable" width="100%"
 +
!Model
 +
!Board-Manufacturer
 +
!Notes
 +
!QE/CI
 +
!Output
 +
!Dual display
 +
!colspan="2"| Compatible 64bit
 +
|-
 +
|GeForce 8400GS 512 DDR3
 +
|Galaxy
 +
|
 +
*Work OOB
 +
|{{Y}}
 +
|DVI
 +
|Not tested
 +
|{{Y}}
 +
|-
 +
|GeForce 8500GT 512 DDR3
 +
|Asus
 +
|
 +
* Chameleon 2.2 SVN-R2246
 +
* GraphicsEnabler=Yes
 +
|{{Y}}
 +
|VGA
 +
|Not tested
 +
|{{Y}}
 +
|-
 +
|[http://www.gigabyte.com/products/product-page.aspx?pid=3612#ov GeForce GT 220]
 +
|Gigabyte
 +
|
 +
* Chameleon 2.2 SVN-R2246
 +
* GraphicsEnabler=Yes
 +
|{{Y}}
 +
|DVI-I / D-SUB / HDMI
 +
|Not tested
 +
|{{Y}}
 +
|-
 +
|[http://www.inno3d.com/products/graphic_card/gtx200/gt240.html GeForce GT 240 1GB GDDR5]
 +
|Inno3D
 +
|
 +
* Chameleon 2.2 SVN-R2250
 +
* GraphicsEnabler=Yes
 +
|{{Y}}
 +
|DVI-I / VGA / HDMI
 +
|Not tested
 +
|{{Y}}
 +
|-
 +
|[http://www.gigabyte.com/products/product-page.aspx?pid=3611#ov GeForce GT 430]
 +
|Gigabyte
 +
|
 +
* Chameleon 2.2 SVN-R2246
 +
* GraphicsEnabler=Yes
 +
|{{Y}}
 +
|DVI-I / D-SUB / HDMI
 +
|Not tested
 +
|{{Y}}
 +
|-
 +
|[http://www.asus.com/Graphics_Cards/ENGTX560_Ti_DCII_TOP2DI1GD5#ov GeForce GTX 560 Ti 1GB GDDR5]
 +
|ASUS
 +
|
 +
*Clover v2 r2656
 +
*Inject nVidia = True
 +
|{{Y}}
 +
|Dual DVI-I / DVI-I-->D-SUB adapter / HDMI
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|GeForce GT 570 1280MB GDDR5
 +
|Gainward
 +
|
 +
* Works OOB
 +
|{{Y}}
 +
|Dual DVI-I / DP / HDMI
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|GeForce GT 610 2GB DDR3
 +
|Twintech
 +
|
 +
* Works OOB
 +
|{{Y}}
 +
|Dual DVI-I / D-SUB / HDMI
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|[http://www.asus.com/Graphics_Cards/GT610SL1GD3L GeForce GT610 1GB Low Profile]
 +
| ASUS
 +
|
 +
* tested with iAtkos ML2
 +
* Works OOB
 +
|{{Y}}
 +
|DVI/HDMI/VGA
 +
|DVI {{Y}} VGA & HDMI -No Tested
 +
|{{Y}}
 +
|-
 +
|GeForce GT 620
 +
|NVidia
 +
|
 +
* Works OOB
 +
|{{Y}}
 +
|DVI-I / D-SUB / HDMI
 +
|{{Y}}
 +
|{{Y}}
 +
|-
 +
|[http://www.gainward.com/main/edm/GTX670_phantomII/gw_edm_GTX670_PhantomII.php GeForce GTX 670]
 +
|Gainward
 +
|
 +
* Chameleon 2.2 SVN-R2246
 +
* No need of additional flags
 +
|{{Y}}
 +
|DVI  / DVI / Displayport / HDMI
 +
|Not tested
 +
|{{Y}}
 +
|-
 +
|[http://www.gigabyte.com/products/product-page.aspx?pid=4361#ov GeForce GTX660 2GB]
 +
|Gigabyte
 +
|
 +
*QE/CI Enabled on GM with [http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=129693 these kexts] from DP8, install with a kext tool
 +
*GraphicsEnabler=No
 +
|{{Y}}
 +
|DVI / DVI-I-->D-SUB adapter
 +
|Yes
 +
|{{Y}}
 +
|-
 +
|[http://www.asus.com/Graphics_Cards/GTX660DC22GD5/specifications/#ov GeForce GTX660 2GB]
 +
|Asus
 +
|
 +
*Works OOB
 +
*GraphicsEnabler=No
 +
|{{Y}}
 +
|DVI / DVI-I-->D-SUB adapter
 +
|Yes
 +
|{{Y}}
 +
|-
 +
|[http://www.evga.com/Products/Product.aspx?pn=01G-P4-2650-KR GeForce GTX 650 1GB GDDR5]
 +
|Evga
 +
|
 +
*Works OOB
 +
|{{Y}}
 +
|DVI
 +
|Not tested
 +
|{{Y}}
 +
|-
 +
|GeForce GT 610 1GB GDDR3
 +
|Asus
 +
|
 +
*Works OOB
 +
*GraphicsEnabler=No/Yes Optional
 +
|{{Y}}
 +
|VGA/DVI/HDMI
 +
|Yes
 +
|{{Y}}
 +
|-
 +
|GeForce 8500GT 512 DDR3
 +
|Gainward
 +
|
 +
* GraphicsEnabler=Yes
 +
|{{Y}}
 +
|VGA, DVI
 +
|Yes
 +
|{{Y}}
 +
|-
 +
|GeForce 9500GT 1024 DDR2
 +
|Inno3D
 +
|
 +
* GraphicsEnabler=Yes
 +
|{{Y}}
 +
|VGA, DVI
 +
|Yes
 +
|{{Y}}
 +
|-
 +
|GeForce 9800GT ECO 1024 DDR3
 +
|ZOTAC
 +
|
 +
*GraphicsEnabler=Yes
 +
|{{Y}}
 +
|DVI, DVI
 +
|Yes
 +
|{{Y}}
 +
|-
 +
|GeForce 9800GT 512Mo
 +
|Twintech
 +
|
 +
*Works OOB, may require DSDT patch
 +
*GraphicsEnabler=Yes
 +
|{{Y}}
 +
|DVI, DVI
 +
|Yes
 +
|{{Y}}
 +
|-
 +
|}
 +
 +
===Integrated===
 +
====INTEL====
 +
{| class="wikitable" width="100%"
 +
!Model
 +
!Board-Manufacturer
 +
!Notes
 +
!QE/CI
 +
!Output
 +
!Dual display
 +
!colspan="2"| Compatible 64bit
 +
|-
 +
|IntelHD 4000
 +
|INTEL
 +
|Fitted to laptops such as Acer Aspire v3-571G. Clover: Inject Intel=True, ig-platform-id=0x01660003
 +
|{{Y}}
 +
|Built-in LCD + HDMI
 +
|Yes
 +
|{{Y}}
 +
|}
 +
 +
====NVIDIA====
 +
{| class="wikitable" width="100%"
 +
!Model
 +
!Board-Manufacturer
 +
!Notes
 +
!QE/CI
 +
!Output
 +
!Dual display
 +
!colspan="2"| Compatible 64bit
 +
|-
 +
|Quadro NVS 135M
 +
|NVIDIA
 +
|Fitted to laptops such as Dell D630/D830. Works OOB
 +
|{{Y}}
 +
|Built-in LCD + VGA
 +
|Not tested
 +
|{{Y}}
 +
|-
 +
|Quadro NVS 140M
 +
|NVIDIA
 +
|Fitted to laptops such as Dell D830. Works OOB
 +
|{{Y}}
 +
|Built-in LCD + VGA
 +
|Not tested
 +
|{{Y}}
 +
|-
 +
|Quadro FX 360M
 +
|NVIDIA
 +
|Fitted to mobile workstations such as Dell Precision M4300. Works OOB
 +
|{{Y}}
 +
|Built-in LCD + VGA
 +
|Not tested
 +
|{{Y}}
 +
|-
 +
|GeForce 9600M GS
 +
|NVIDIA
 +
|AppleGraphicsPowerManagement.kext is needed to be modified
 +
|{{Y}}
 +
|HDMI output working
 +
|Not tested
 +
|{{Y}}
 +
|-
 +
|}
 +
 +
==Network Cards==
 +
===Wireless===
 +
{| class="wikitable" sortable" width="100%"
 +
!Interface
 +
!Standard
 +
!Device
 +
!Manufacturer
 +
!Chipset
 +
!Notes
 +
!colspan="2"| Compatible 64bit
 +
|-
 +
|mini PCIe
 +
|802.11 b/g/n
 +
|AR5B91
 +
|Atheros
 +
|AR9281
 +
|Working OOB. Seen as Airport Extreme
 +
|{{Y}}
 +
|-
 +
|mini PCIe
 +
|802.11 b/g
 +
|Atheros
 +
|Atheros-based
 +
|AR9285
 +
|Working OOB. Seen as 3rd party card.
 +
|{{Y}}
 +
|-
 +
|mini PCIe
 +
|802.11 b/g
 +
|Broadcom
 +
|Broadcom-based
 +
|BCM94322HM8L
 +
|Working OOB. Seen as Airport Extreme
 +
|{{Y}}
 +
|-
 +
|mini PCIe
 +
|802.11 b/g
 +
|Dell DW1390
 +
|Broadcom-based
 +
|BCM4311
 +
|Working OOB. Seen as 3rd party card.
 +
|{{Y}}
 +
|-
 +
|mini PCIe
 +
|802.11 b/g
 +
|Dell DW1390
 +
|Broadcom-based
 +
|BCM4321
 +
|Working OOB. Seen as Broadcom BCM4322 Wirless card.
 +
|{{Y}}
 +
|-
 +
|mini PCIe
 +
|802.11 a/b/g
 +
|Dell DW1490
 +
|Broadcom-based
 +
|BCM4311
 +
|Working OOB. Seen as 3rd party card.
 +
|{{Y}}
 +
|-
 +
|mini PCIe
 +
|802.11 b/g/n
 +
|tl-wdn4800
 +
|tp-link
 +
|Atheros AR9380
 +
|Working OOB.
 +
|{{Y}}
 +
|-
 +
|USB2.0
 +
|802.11 ab/g/n
 +
|W522U
 +
|Tenda
 +
|Ralink RT3572
 +
|Use Ralink's driver tool v4.2.9.2: http://www.mediatek.com/_en/07_downloads/01_windows.php?sn=502. Then run Ralink Utility at startup to connect. PCI Ven id 0x148f, Prod id 0x3572.
 +
|{{Y}}
 +
|-
 +
|}
 +
 +
===Wired (Ethernet)===
 +
{| class="wikitable" sortable" width="100%"
 +
|-
 +
!Interface
 +
!Standard
 +
!Device
 +
!Manufacturer
 +
!Notes
 +
!colspan="2"| Compatible 64bit
 +
|-
 +
|Internal (PCI-Ex Lanes)
 +
|10/100/1000
 +
|Realtek RTL8111C
 +
|Realtek
 +
|On a GA-EP45-UD3P Rev 1.0. They're detected and they get an IP address thru DHCP but they lose connectivity after a bit ending up with a self-assigned address (169.xxx.xxx.xxx). Tested with Lnx2Mac and Realtek RTL8100SL kexts.
 +
|{{N}}
 +
|-
 +
|Internal (PCI-Ex Lanes)
 +
|10/100/1000
 +
|Realtek RTL8111D
 +
|Realtek
 +
|On a GA-EX58-UD5 Rev 1.0. Works without a problem with newest Realtek RTL8111.kext v.1.2.2. http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/?hl=%20realtekrtl8111
 +
Supports Realtek RTL8111/8168 B/C/D/E/F/G found on recent boards.
 +
|{{Y}}
 +
|-
 +
|Internal (PCI-Ex Lanes)
 +
|10/100
 +
|Realtek RTL8103E
 +
|Realtek
 +
|[http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=7&PFid=7&Level=5&Conn=4&DownTypeID=3&GetDown=false# RTGMac]
 +
 +
search for RTGMac_v2.0.6 and take this " MacOS 10.6 on Intel-based Mac computer " version
 +
|{{Y}}
 +
|-
 +
|Internal (PCI)
 +
|10/100/1000
 +
|Realtek RTL8169SC
 +
|Realtek
 +
|[https://code.google.com/p/hackintosh-osx86-on-mobo-gigabyte-ga-ep41-ud3l/downloads/detail?name=AppleRTL8169Ethernet.kext.zip&can=2&q=]
 +
Try using this original AppleDriver as the others such as "Realtek RTL81xx.kext" will not work
 +
|{{Y}}
 +
|-
 +
|USB 2.0
 +
|802.11 n / g / b
 +
|00062778 WLAN
 +
USB 2.0 150Mbps
 +
|Hama
 +
|Working with UI 4.0.9.6 Drv: 4.2.9.2
 +
https://www.hama.com/webresources/drivers/00062/00062778_macosx107_108_109_dv4_2_9_2_uiv4_0_9_6.dmg
 +
 +
Tested and working properly. Thx to kaefpe.me
 +
|{{Y}}
 +
|-
 +
|}
 +
 +
==Sound Cards==
 +
{| class="wikitable" sortable" width="100%"
 +
|-
 +
!Interface
 +
!Hardware Name
 +
!Manufacturer
 +
!Notes
 +
!colspan="2"| Compatible 64bit
 +
|-
 +
|PCI
 +
|SigmaTel STAC 92XX C-Major High Definition Audio CODEC
 +
|SigmaTel
 +
|It works with VoodooHDA v2.8.4 driver from this [http://sourceforge.net/projects/voodoohda/?source=navbar link] or using this [http://www.osx86.net/files/getdownload/1774-voodoohda-2-8-4-pkg-installer/ installer] (this is the easiest way).
 +
Follow [http://www.osx86.net/files/file/1194-voodoohda-2-8-4-pkg-installer/ this] topic to get it to work.
 +
|{{Y}}
 +
|-
 +
|}
 +
 +
== Webcams ==
 +
{| class="wikitable" width="100%"
 +
!Interface
 +
!Item Description
 +
!Manufacturer
 +
!Notes
 +
!colspan="2"| Compatible 64bit
 +
|-
 +
|USB 2.0
 +
|V-UBM46
 +
|Logitech - Vision Pro (Mac)
 +
|Works OOB
 +
|{{Y}}
 +
|-
 +
|USB 2.0
 +
|A4TECH USB2.0 PC Camera
 +
|A4TECH Corp.
 +
|Works OOB
 +
|{{Y}}
 +
|}
 +
 +
== Bluetooth ==
 +
{| class="wikitable" width="100%"
 +
!Type of Accessory
 +
!Item Description
 +
!Manufacturer
 +
!Notes
 +
!colspan="2"| Compatible 64bit
 +
|-
 +
|BT module 2.0
 +
|Dell DW350
 +
|CSR
 +
|Works OOB
 +
|{{Y}}
 +
|-
 +
|BT module 2.0/2.1
 +
|Dell DW360
 +
|CSR
 +
|Works OOB
 +
|{{Y}}
 +
|-
 +
|Cambridge Silicon Radio USB BT module
 +
|CD-R King "Cruise" USB Dongle
 +
|CSR
 +
|Works OOB
 +
|{{Y}}
 +
|-
 +
|BT dongle 2.0/2.1
 +
|BELKIN mini Bluetooth USB dongle
 +
|CSR
 +
|Works OOB
 +
|{{Y}}
 +
|-
 +
|BT dongle 4.0
 +
|IOGEAR Bluetooth 4.0 USB Micro Adapter
 +
|Broadcom
 +
|Works OOB
 +
|{{Y}}
 +
|-
 +
|}
 +
 +
== USB 3.0 Cards / Adapters ==
 +
{| class="wikitable" width="100%"
 +
!Type of Accessory
 +
!Item Description
 +
!Manufacturer
 +
!Notes
 +
!colspan="2"| Compatible 64bit
 +
|-
 +
|PCIe-card with 4 connectors USB3
 +
|ALL PCI cards
 +
|Chipset FRESCO 1100
 +
|Works OOB
 +
|{{Y}}
 +
|}

Latest revision as of 05:13, 10 December 2016

This is a component level hardware compatibility list for pre-release versions of Apple's Mac OS X Mavericks. As this is not the final release, compatibility may change throughout the builds, so please, do not rely on this list when buying hardware. It is for those who wish to share/experiment with pre-release versions of the OS. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for pre-release 10.9 builds only.

For how to edit the Wiki, please see this thread. Thank you!

You're looking for an Installation guide? see here

Contents

[edit] Motherboards

[edit] Abit

Hardware Name Chipset Notes Patches Used Compatible 64bit

[edit] Asrock

Hardware Name Chipset Notes Patches Used Compatible 64bit
FM2A75M-HD+ AMD A75 System Configuration:
  • CPU: AMD Athlon X4 750k
  • GPU: Asus GeForce GT 610 1GB
  • GPU: R7 260X Asus DirectCU II OC 2GB

Installed using Niresh's Mavericks .dmg, GPUs work seperately, of course.

Kernel panic fix through installer; Tick.png
P45R2000 WiFI Intel® P45 + ICH10R chipset No special Patching. Clover r2165 no dsdt Tick.png
G31M-S Intel® G31 + ICH7 Chipsets Updated Bios Firmware to v2.10

""Bios Settings:""

  • System Default
  • (USB) USB 2.0 Support Disabled
  • (CPU) No-Execute Memory Protection Enabled
  • (ACPI) ACPI HPET Table Enabled

""DMG File:""

  • Niresh-Mavericks

""USB/HDD Installer"" (If your using a USB for this look up "hackintosh slow usb" first. Massive speed diff, 3h to 30m diff)

  • open Disk Utility, select HDD/USB you want as the installer

(i had better luck with "spare" HDD)

  • Options = GUID
  • Format to Mac OS Extended (journaled)
  • Now Format it
  • Select HDD/USB and select restore tab
  • Mount the DMG file (Niresh-Maverics)
  • use as source and select/drag your USB/HDD to destination
  • Click Restore
  • Use Chameleon and select the HDD/USB
  • Now boot from your new Installer USB/HDD

(After installing you can change back the USB 2.0 Support in the bios as this OS X supports it)

No Tick.png
Z68 Extreme4 Intel Z68 System Configuration:
  • CPU: Intel i5-2500
  • GPU: Nvidia GTS 250 1gb (Intel 3000 onboard works too)

Component Status:

Installed fresh 10.9 GM. Had separate 10.8.3 already working (see wiki page).
I simply followed the instructions here and was able to reach installer Vanilla style. After that a few kexts, DSDT, boot loader, and you're good to go:

  1. http://www.insanelymac.com/forum/topic/280756-guide-the-all-in-one-guide-to-vanilla-os-x-including-chameleon-dsdt-for-beginners-updated-for-mavericks/
  • BIOS: As was with 10.8, 10.9 still requires an updated BIOS. You need to flash your mobo BIOS with the patched 2.20 version to be able to install and boot OSX 10.8.x. This is because as of 10.8 the NullCpuPowerManagment.kext is rendered useless, which means you cannot boot. The patched BIOS will fix this permanently, meaning you wont even need a replacement .kext. Read about it and download the file here:
  1. http://bios.zmac.net/asrock/Asrock-Z68-Extreme4-220_modified.zip
  2. Source of BIOS patches: http://biosrepo.wordpress.com/asrock/z68/
  • DSDT: You can install and run OSX without a DSDT, but it is unstable and has odd issues (sometimes boot without USB working, no sleep, etc). Put this file in your /Extra/ folder and reboot to fix.
  1. Search tonymac x86.com because insanelymac will not let me directly link. Just search for Z68 Extreme 4 DSDT you'll find it.
  • SMBIOS: Pick the Macmini5,1 option, as it is most closely related to your mobo.
  • Cloning: Speaking of which, once you get to your desktop, I highly recommend making a clone to another partition/USB drive of your hard work so far. I had to reclone 4 times during the process from making mistakes, and my clone image saved me many hours. Use CCC (Carbon Copy Cloner) or your favorite app.
  • Booting: Just use the bootloader (Chameleon v2.2 r2265). If you used 10.8 before this, also copy over your /Extras/ folder to the new 10.9 (both installer partition, and installed-to partition) for the DSDT, smbios, .plist, etc.
  1. File is included in the "Essentials" zip file located in the first link for instructions on how to install Vanilla style above.
  • Graphics: For installation of OSX, you will *need* to have your Intel Integrated Graphics 3000 plugged into a monitor directly. Tell the BIOS to use "Onboard" video (in Northbridge section). This is required for OSX installation and first boot.
  1. After install, if you are staying on Onboard graphics, change nothing. If you are installing your own graphics card, you may have to install your own .kext files for it (do your research).
  2. After getting your graphics card working, if you are getting long boot-times, try booting with -v and watch where it hangs. If it says "SNB Framebuffer did not show up, unload" then you will need to simply delete all the .kext files named AppleIntelHD3000Graphics (should be 3 or 4 of them). This will tell OSX to stop trying to load from the onboard graphics, which fixes the "SNB Framebuffer" long boot time issue.
  • App Store Login Issue: If you're trying to login to the App Store, or use apps downloaded through the App Store, and you get the "An Unknown Error Has Occurred"
  1. Simply delete this file, empty the trash, and reboot. You'll need to open System Preferences > Network and add your Ethernet connection again manually. Then it all works!
  2. ./Library/Preferences/SystemConfiguration/NetworkInterfaces.plist

Chameleon v2.2 r2265; BIOS patch; SMBIOS; DSDT & SSDT; Audio and Ethernet Kexts

Tick.png

[edit] Asus

Hardware Name Chipset Notes Patches Used Compatible 64bit
P5QL-PRO[1] Intel® P43 + ICH10 chipset System Configuration:
  • CPU: Intel Core 2 duo E6550
  • GPU: EVGA GeForce 8400gs 512 MB
  • RAM: 3x2GB DDR2 Components Status:
  • EVGA GeForce 8400gs 512 MB OOB
  • ALC1200 KEXT [2]
  • Lan AttansicL1eEthernet.kext
  • works, shutdown, restart

Install method:

  • myhack 3.2BETA8
Patches:
  • Latest Chameleon Bootloader
Tick.png
P5QPL-AM Intel® G41 + ICH7 chipset System Configuration:
  • CPU: Intel Core 2 duo E6300
  • GPU: Shapphire hd5450 1024 MB
  • RAM: 2x2GB DDR2 corsair

Components Status:

  • AMD Radeon HD 5450 works with edit id 68f9 on AMDRadeonX3000.kext, ATI5000Controller.kext
  • audio voodoohda 2,82
  • Lan AttansicL1eEthernet.kext
  • works, shutdown, restart

Install method:

  • myhack
  • boot with -v GraphicsEnabler=No
Patches:
  • Latest Chameleon Bootloader
Tick.png
P8Z68V-LE Z68 System Configuration:
  • CPU: Intel Core i7 3.41 GHz
  • GPU: ATI Radeon HD 5000 1024 MB
  • RAM: 4x4GB DDR3 Kingston
  • Keyboard: Generic USB Keyboard
  • Mouse: Generic USB Mouse

Components Status:

  • All works, sleep, wakeup, shutdown, restart, speedstep, Updates Through MacAppStore
  • ATI Radeon HD 5000 works OOB

Install method:

  • Tutorial
  • -v -x -f for instalation
  • -v (dart=0 fault) post Instalation
Patches:
  • Latest Chameleon Bootloader
  • Kexts (FakeSMC, NullCPUPowerManagement, LNX2Mac's Realtek RTL81xx for LAN, non DSDT Realtek ALC 892 for Sound)
  • Modded Bios
Tick.png
P8Z68M-Pro Z68 System Configuration:
  • CPU: Intel Core i5 2400 @ 3.1GHz
  • GPU: XFX Radeon HD 6870 1024 MB
  • RAM: 2x4GB DDR3 G.SKILL CL9 RipjawsX
  • Keyboard: Apple Keyboard
  • Mouse: Logitech MX518

Components Status:

  • All works, sleep, wakeup, shutdown, restart, speedstep, Updates Through MacAppStore
  • AMD Radeon HD 6870 works OOB with GraphicsEnabler=Yes

Install method:

Patches:
  • Latest Chameleon Bootloader
  • Kexts (FakeSMC, LNX2Mac's Realtek RTL81xx for LAN)
  • DSDT and SSDT, smbios.plist from iMac 12,2
  • Patched AICPUPM.kext (Lion 10.7.3) for Speedstep from InsanelyMac
  • Modded Bios for P8Z68-M Pro
Tick.png
P8Z68V-PRO Z68 System Configuration:
  • CPU: Intel Core i7 2600K @3.4GHZ
  • GPU: NVIDIA Gainward GTX670 phantom 2GB
  • RAM: 2x4GB DDR3 Kingston hyperx genesys
  • Keyboard: Microsoft sidewinder X6
  • Mouse: Microsoft 3-click usb mouse

Components Status:

  • All works, sleep, wakeup, shutdown, restart, sound, lan, qe/ci
  • GTX 670 works OOB

Install method:

Patches:
  • Chameleon Bootloader(from the tutorial)
  • Kexts:FakeSMC, NullCPUPowerManagement, Intel hnak's AppleIntelE1000, non DSDT Realtek ALC 892 sound
  • smbios from imac12,2
  • DSDT and SSDT
  • It doesn't boot without the -f flag
Tick.png
P5KVM Intel G33 + ICH9R System Configuration:
  • MAINBOARD: P5K V-M
  • CPU: Intel Q6600 CPU 2.24 GHz @ 2.76 GHz
  • GPU: MSI 8500GT (512MB)OTB dual monitor, monitor 1 DVI monitor 2 VGA
  • RAM: 4x2GB 800 MHz Crucial

Components Status:

  • Audio - Built-in works 
  • Ethernet - Works
  • USB - All Work
  • SATA - All Work
  • IDE - Works
  • Firewire - works
  • Wireless - DW 1515 Recognised from install instantly and in system profiler as third party card Airport ready.
  • iCloud - App Store - iMessage - iCloud Keychain all work 
  • Bluetooth- Dlink DBT 122 via usb
  • Apple Trackpad Works-100% All Gestures Available
  • ShutDown, Restart, Working 100 % .

Install method:

Patches:
  • Marvell88E8056.kext AppleHDA.kext HDAEnabler by Taruga. IOAHCIBlockStorageInjector.kext AHCIPortInjector stops hdd showing as external with orange icons
  • Chameleon-2.2 svn-r2246.pkg
  • Kext Helper b7
Tick.png
P5B SE Intel P965 System Configuration:
  • MAINBOARD: P5B SE
  • CPU: Intel Q6600 CPU 2.24 GHz @ 2.88 GHz
  • GPU: Nvidia (MSI) Gt220 1GB (DVI-HDMI-RGB)
  • Multi-Monitor Working OOB,
  • RAM: 4x2GB 800 MHz Crucial

Components Status:

  • Audio - Built-in Realtek ALC883 (Not Working Yet)
  • Ethernet - Attansic L1(Working By pkg install) Works
  • USB - All Work, USB x10 [6Front + 4back] (All Working, Disabled EHCi Hand Off),
  • SATA - All Work
  • 250GB HDD x4,
  • LG Multi Drive DVD Writer: Raid Port as ACHI,
  • IDE - Not Tested
  • Wireless - TP-Link TL-WDN4800 2.4ghz + 5Ghz (a,b,g,n)

(TP-LINK TL-WDN4800 Dual Band Wireless N900 PCI Express Adapter) (Working OOB), AirDrop + Airport Works.

  • iCloud - Not Signing in.
  • App Store - Works.
  • iMessage Works.
  • Apple USB Keyboard, Apple USB Mouse Works-100% All Gestures Available.
  • ShutDown (ATX not going off), Restart, Working 100 % .
  • USB 2.0 Camera (Works in All Apps),

Install method:

  • myHack 3.2 BETA 8, No DSDT needed for install. Update to 10.9 dp2-dp3-dp4-dp5-dp6 via software update.
Patches:
  • Attansic L1.pkg
Tick.png
P5G41T-M LX Intel® G41 /ICH7 System Configuration:
  • MAINBOARD: P5G41T-M LX V2
  • CPU: Intel E5500 CPU 2.80 GHz
  • GPU: Ati (Asus) 5570 1GB (DVI-HDMI-RGB) - Worked OOB
  • Multi-Monitor Working OOB,
  • RAM: 8GB 1066MHz Kingston

Components Status:

  • Audio - Built-in ALC887 (Patched VoodooHDA) - Works
  • Ethernet - Atheros Gb LAN - Worked OOB
  • USB - All Work
  • SATA - All Work
  • 64GB ADATA SSD
  • IDE - Not Tested
  • App Store - Works.
  • iMessage Works.
  • ShutDown, Restart, Working 100 % .

Install method:

  • No DSDT just Chameleon
Patches:
  • Patched VoodooHDA
Tick.png
P8H61-M LX3 R2.0 Intel® H61(B3) System Configuration:
  • MAINBOARD: P8H61-M LX3 R2.0
  • CPU: Intel Core i3-3220
  • GPU: (Asus) Geforce GT 610 1GB (DVI-HDMI-RGB) - Worked OOB
  • Multi-Monitor Working OOB,
  • RAM: 6GB 1333MHz Kingston

Components Status:

  • Audio - VIA VT1708S (Patched VoodooHDA) - Works
  • Ethernet - Realtek RTL8111F Glan- (Patched RealtekRTL8111.kext) Work
  • USB - All Work
  • SATA - All Work
  • IDE - Not Tested
  • GM 13A603 And Update DP1/DP8 - Works.
  • ShutDown, Restart, Working 100 % .

Install method:

  • Myhack 3.2BETA8
Patches:
  • Patched VoodooHDA
  • Patched RealtekRTL8111.kext
Tick.png
P5K Intel P35 + ICH9 System Configuration:
  • MAINBOARD: P5K crossflashed to P5KR
  • CPU: Intel Q6600 CPU 2.4 GHz
  • GPU: Asus 8800GT (512MB)OTB
  • RAM: 3x2GB 800 MHz

Components Status:

  • Audio - ALC 883 patch from [3] works
  • Ethernet - Works with AttansicL1 ethernet.pkg (Not with Kext)
  • USB - All Work
  • SATA - All Work
  • IDE - Works with JmicronATA.kext
  • Firewire - works, somewhat unstable
  • Wireless - None
  • iCloud - App Store - iMessage - iCloud Keychain with fiximessage.zip patch
  • Bluetooth- None
  • ShutDown, Restart works with OSXRestart.kext
  • Sleep, Wake Up, Hibernation works with DSDT patch (using Chameleon Wizard)

Install method:

  • System didn't work with myhack, so used tonymacx86 guide with External USB HDD. Deleted IOBluetoothHID.kext Install boot flags -v -x PCIRootUID=0 npci=0x2000 GraphicsEnabler=Yes
Patches:
  • LegacyYukon.kext AppleHDA.kext HDAEnabler.kext

JmicronATA.kext And all other kexts from previous P5K 10.6 installations

  • with no VoodooHDA
  • Chameleon patch with Chameleon Wizard
  • DSDT, kexts except mentioned were from [4]
Tick.png

[edit] Biostar

Hardware Name Chipset Notes Patches Used Compatible 64bit
G41d3+ version 0 Intel G41 / ICH7 System Configuration:
  • CPU-Intel CORE 2 DUO 2,13Ghz DUAL CORE
  • Graphics ATI Radeon HD 5770
  • 2x 4 GB 1333 Mhz DDR3 KINGSTON Ram
  • 8x Lg DVD/CD RW
  • 1x 500GB (OSX MAVERIKS)
  • 1x 2TB Stuff

Install:

  • OS X 10.8 b1 with myHack
  • Install then update to 10.9 b2

Onboard Ethernet: RTGMac

search for RTGMac_v2.0.6 and take this " MacOS 10.6 on Intel-based Mac computer " version

  • Sound
    • onboard with Voodoohda
Tick.png

[edit] ECS

Hardware Name Chipset Notes Patches Used Compatible 64bit
945GCT-M 1333 V3.0 Intel® 945GC System Configuration
  • CPU: Intel Pentium Dual Core E5800 3.2Ghz
  • RAM: 2 x 2 GB DDR2 6400
  • Graphic: Leadtech NVIDIA Geforce 8600GT 256MB
  • LAN: Realtek® RTL8101E 10/100 LAN (co-lay 8111B)
  • Audio: IDT 92HD202 6-channel High Definition Audio Codec
  • HDD: WD 500GB SATA
  • DVD Drive: LITE-ON DVD-RW
Installation method:

Use flashdrive with Mavericks created by MyHack
1. Boot from the USB. Used kernel flags "-v -f npci=0x3000 PCIRootUID=0" or else got a garbled screen.
2. Format a partition as Mac OS X Extended (Journaled) in Disk Utility
3. Apply generic myhack fix
4. Reboot after installation
5. Install RTL81XX, VoodooHDA 2.8.2 (2.8.4 did not work for me)
6. Added kernel flags "-v -f npci=0x3000 PCIRootUID=0" to /Extra/org.chameleon.Boot.plist
7. Disabled computer sleep in power management, as I wasn't confident about sleep, and I do not care about sleep.

Tick.png

[edit] EVGA

Hardware Name Chipset Notes Patches Used Compatible 64bit

[edit] Foxconn

Hardware Name Chipset Notes Patches Used Compatible 64bit

[edit] Gigabyte

Hardware Name Chipset Notes Patches Used Compatible 64bit
GA-EX58-UD3R X58 System Configuration:
  • CPU: Intel Core i7 920 @ 2.8GHz
  • GPU: EVGA GTX660 Ti 2GB
  • RAM: 3x2GB Corsair 1600MHz DDR3
  • DSDT from Tonymacx86

Components Status:

  • Everything works

Install method:

  • USB flash drive
Patches:
  • Chameleon
  • Used EFIStudio to fix iCloud, App Store and iMessages
  • Kexts (FakeSMC, ALC888 Legacy (with DSDT), Realtek AppleRTL8169Ethernet, 3rd Party SATA - For GSata ports, Trim Enabler and AppleRTC Patch (to prevent bios resets)
  • smbios.plist from MacPro5,1 with custom serial
Tick.png
GA-G31-ES2l rev 1.x Intel® G31 Chipset System Configuration:
  • CPU: Intel Pentium E5200 @2,5Ghz
  • GPU: Asus GeForce GT610 1024MB DDR3
  • RAM: Kingston DDR2 800Mhz 1GB
  • HDD: Maxtor 7200rpm 40GB IDE

Component Status:

  • Shutdown Tick.png
  • Restart Tick.png
  • Sleep Tick.png
  • USB 2.0 Tick.png
  • Ethernet Tick.png
  • Video Tick.png DVI -No Tested VGA & HDMI
  • Audio Tick.png
BIOS changes:
  • Mode 64Bits

Installation Method:

  • USB flash drive + Niresh Distro
  • Boot with -v to install. once installed boot up again with -v -x
  • Default settings
  • GO! :)
Tick.png
GA-Z68X-UD3H-B3 Z68 System Configuration:
  • CPU: Intel Core i5 2500K @ 3.3GHz
  • GPU: Gigabyte GeForce GT 430 1024 MB
  • RAM: 2x4GB DDR3 Corsair
  • UEFI BIOS U1L (no DSDT)

Components Status:

  • All works
  • USB 3.0 not tested (Etron EJ168)

Install method:

Patches:
  • Chameleon 2.2 SVN-R2246
  • Kexts (FakeSMC, NullCPUPowerManagement, ALC889 (without DSDT) & LNX2Mac's Realtek RTL81xx)
  • SSDT, smbios.plist from MacPro3,1
Tick.png
GA-X58A UD3R X58 ICH10R System Configuration:
  • CPU: Intel Core i7 950 @ 3,02 Ghz
  • GPU: Sapphire Radeon HD 5850 1024 MB
  • RAM: 3*2GB DDR3 Corsair XMS3

Install method:

Patches:
  • Chameleon 2.2 SVN-R2246
  • Kexts (FakeSMC, NullCPUPowerManagement (or get a KP), ALC889a use for now voodooHDA 0.2.56, IOAHCIBlockStorageInjector.kext, RealtekRTL81xx.kext, AppleACPIPS2Nub.kext and ApplePS2Controller.kext (only if u use PS/2), PXHCD.kext, ApplePCIIDE.kext
  • smbios.plist from MacPro5,1

Components Status and Installation Info:

  • Audio, Ethernet, PS/2 works with kext, DVI-HDMI works (GraphicsEnabler=Yes), shutdown/restart e sleep work, USB 3.0 work with PXHCD.kext (LaiCe) IDE/PATA work with ApplePCIIDE.kext
  • IMPORTANT: use this kernel flags for start OS X "-f npci=0x2000" or get Error with IOBluetoothHCIController
  • If u get a problem in the installer before the installation, replace the OSinstall.mpkg with This

Test with Golden Master and one problem found (sleep work but get CMOS reset, and abnormal speed clock after wake up)

Tick.png
GA-G41-ES2L G41 System Configuration:
  • CPU: Intel Pentium Dual Core
  • GPU: Asus GeForce GT 610 1024 MB
  • RAM: 2x2GB DDR2 Kingston

Components Status:

  • All seems to work (sleep works) all updates are done from DP1 to DP7 it is working like a charm

Install method:

Patches:
  • Chameleon 2.2 SVN-R2246
  • Kexts (FakeSMC, NullCPUPowerManagement, RealtekR1000SL)
  • SSDT, smbios.plist from MacPro3,1

Components Status and Installation Info:

  • audio : install ( Drivers -> Audio -> ALC8800 -> without dsdt √ alc887 / 888b -> v100202 Legacy ) reboot and you'll have speakers & Mic working
  • GT610 works OOB
Tick.png
GA-EP45-UD3P Rev 1.0 P45 System Configuration:
  • CPU: Intel Core 2 Quad Q6600
  • GPU: Gigabyte GeForce GT 220 1024 MB
  • RAM: 4x2GB DDR2
  • BIOS: F10 (w/ Patched DSDT from 10.8)

Components Status:

  • QE/CI Works.
  • Sound doesn't work. No AppleHDA available yet and I hate VoodooHDA.
  • Ethernet Ports stop working after a bit (few minutes)

Install method:

  • MyHack 3.2 Beta 2 + Replacement of DSDT.AML and known working boot.plist
Patches:
  • Chameleon 2.2 SVN-R2246
  • Kexts (FakeSMC, NullCPUPowerManagement)
  • No SSDT, smbios.plist from MacPro3,1
Tick.png
GA-Z77-DS3H rev 1.1 Z77-DS3H rev 1.1 System Configuration:
  • CPU: Intel Core i3-3225 @ 3.4GhZ
  • GPU: MSI Radeon HD 6570 2GB
  • RAM: 2x4GB DDR3 1600 Crucial
  • UEFI BIOS F9 (no DSDT)

Components Status:

  • All works

Install method:

Patches:
  • Chameleon 2.2 SVN-R2246
  • Kexts (FakeSMC, NullCPUPowerManagement, ALC887 (without DSDT) & ALXEthernet.kext for AR8161)
  • SSDT, smbios.plist from iMac mid 2011
Tick.png
GA-Z77-DS3H rev 1.1 Z77-DS3H rev 1.1 System Configuration:
  • CPU: Intel Core i5-3570 @ 3.4GhZ
  • GPU: ASUS GTX660 2GB
  • RAM: 4x4GB DDR3 1600 Samsung
  • UEFI BIOS F9 (no DSDT)

Components Status:

  • All works

Install method:

Patches:
  • Clover v2 r2652
  • Kexts (FakeSMC, ALC887 (Clover patch AppleHDA) & ALXEthernet.kext for AR8151)
  • smbios.plist from MacPro 6,2
Tick.png
GA-EP45-DS3R rev.1.0 P45 System Configuration:
  • CPU: Intel Core 2 Duo E7500 @ 2.93Ghz
  • GPU: Galaxy Nvidia 8400GS 512 DDR3
  • RAM:1x4GB Corsair DDR2 800Mhz

Components Status:

  • All works

Install method:

Patches:
  • Chameleon 2.2 SVN-R2246
  • Kexts (FakeSMC, NullCPUPowerManagement)
  • Sound ALC889A works with (ALC885/889A)
  • LAN work With LNX2Mac's Realtek RTL81xx
  • smbios.plist from old OS X
Tick.png
P31-DS3L P31 System Configuration:
  • CPU: Intel Core 2 Duo E7200 @ 3.06Ghz
  • GPU: ASUS Radeon HD5670 512 DDR3
  • RAM: 2X2GB Kingmax DDR2 1020Mhz

Components Status:

  • All works

Install method:

  • Retail Install from USB HDD
  • Updated to 10.9 GM
  • BIOS ver.: F10
  • Chameleon ver.: 2255
  • Kexts: FakeSMC, RadeonX, ITEIT87x, IntelCPUMonitor, ICHSMBus, LegacyAGPM
  • Sound ALC888 and Radeon HDMI audio works with codec id 888 and AppleHDA.kext
  • LAN works With RealtekRTL81xx.kext
  • smbios.plist: macpro5,1
Tick.png
EP45-UD3R P45 System Configuration:
  • CPU: Intel Core 2 Quad Q8550 @ 2.83Ghz
  • GPU: Gainward NVIDIA GT-9500 512 DDR3
  • RAM: 2X2GB Adata Vietesta DDR2 1333Mhz
  • installed on Adata 64GB SataII SSD

Components Status:

  • All works so far, even dual full hd monitors

Install method:

  • I had to borrow my friends MBPro to prepare USB Installer
  • BIOS ver.: F11
  • GraphicsEnabler=Yes PCIRootUID=1
  • Kexts: FakeSMC, IntelCPUMonitor, ICHSMBus,
  • Sound ALC888
  • LAN worked by first launching but I installed RealtekRTL81xx.kext
  • smbios.plist: macpro4,1
Tick.png

[edit] Intel

Hardware Name Chipset Notes Patches Used Compatible 64bit
Intel DG31PR Intel G31 System configuration:
  • Intel Core 2 Duo E7400
  • Intel G31 chipset
  • HDD: Hitachi HDS721010CLA332 (1TB)
  • RAM: 2x 2GB Kingston DDR2 800
  • NVIDIA GeForce GT240 1GB GDDR5 (GraphicsEnabler)
  • Audio ALC888 (Using VoodooHDA v2.8.2d6)
  • RTL8111GR integrated Gigabit Ethernet (R1000SL kext courtesy of Slice)
Installation method:
  • Mountain Lion 10.9 Golden Master
  • Used MyHack 3.2 Beta 8, HWSensors and VoodooHDA
  • Changed Mac model identifier to iMac10,1 using Champlist (as leaving the serial number to SOMESRLNMBR or something like that just doesn't look legit)

Working:

  • Shutdown/Reboot
  • Mac App Store/iBooks (with the ethernetbuiltin=yes fix)
  • Graphics acceleration (2D/3D)
  • Most applications including Adobe Premiere, Photoshop and the like

Known issues:

  • Sleep mode may not work as with previous setups
  • VoodooHDA needs some fixing, especially with humming noise
Tick.png

[edit] Intel

Hardware Name Chipset Notes Patches Used Compatible 64bit
Intel DG41RQ Intel G31 System configuration:
  • Intel Core 2 Duo E7400
  • Intel G41 chipset
  • HDD: Hitachi HDS721010CLA332 (160 GB)
  • RAM: 2x 2GB Transcend DDR2 800
  • NVIDIA GeForce 210 1GB GDDR3 (GraphicsEnabler)
  • HDA: Realtek ALC662
  • NIC: Realtek RTL8111D
Installation method:
  • Mountain Lion 10.9 Golden Master
  • Used MyHack 3.2 Beta 8, HWSensors and VoodooHDA
  • Chameleon Bootloader
  • VoodooHDA 2.8.2.kext
  • RealTek RTL8111.kext
  • Changed Mac model identifier to iMac10,1 using Champlist (as leaving the serial number to SOMESRLNMBR or something like that just doesn't look legit)

Working:

  • Shutdown/Reboot
  • Mac App Store/iBooks (with the ethernetbuiltin=yes fix)
  • Graphics acceleration (2D/3D)
  • Most applications including Adobe Premiere, Photoshop and the like

Known issues:

  • Sleep mode may not work as with previous setups
  • VoodooHDA needs some fixing, especially with humming noise
Tick.png
DG31PR Intel G31 Express System configuration:
  • CPU: Intel Core 2 Quad Q6600
  • GPU: XFX GeForce 8600 512 540
  • HDA: ALC888
  • NIC: Realtek RTL8111-GR
  • MEM: 1x 2 GB Kingston 800MHz DDR2 SDRAM

BIOS Settings:

  • Load Default settings
  • Boot Device set to Legacy & Automatic mode off
  • Enable USB Boot

Installation method:

  • myHack Install of Retail 10.9.0 USB w/extra boot.plist and -v flag to get in

Patches:

Working:

  • Shutdown/Reboot
  • DVD Player
  • USB 1 & 2 ports
  • card reader
  • VGA @ 1920x1080 no extension needed
  • audio back and front green plugs
  • sleep with apple kb (IntelCPUMonitor.kext)
  • stores
  • Same system for 10.6.8 and 10.8.4 stores are lost on 10.9.0 and on 10.9.1 also audio
Tick.png

[edit] MSI

Hardware Name Chipset Notes Patches Used Compatible 64bit
B75MA-P45 Intel® B75 Chipset System Configuration
  • CPU: Intel Pentium G840
  • RAM: 2 x 4 GB DDR3 1333 MHz
  • Graphic: ASUS NVIDIA Geforce 440GT 1GB
  • LAN: Realtek® 8111E
  • Audio: Realtek® ALC887
  • HDD: SATA II SAMSUNG Spinpoint F1 HD322HJ 320GB 7200
  • DVD Drive: SATA II LG GH22NS30
Installation method:

Use flashdrive with Mavericks created by MyHack
1. Boot from the USB
2. Format a partition as Mac OS X Extended (Journaled) in Disk Utility
3. Reboot after installation
4. Install Lnx2Mac (network driver), select DSDT-Free and iMac 12,1 (system definitions)
5. Install kext for ALC887 (Current)
6. Install patched AppleIntelCPUPowerManagement and remove NullCPUPowerManagement from /Extra and MyHack.kext in /S/L/E
Works:

  • Everything is working!
  • Sleep fully working!
Tick.png
Z68A-G45 B3 Intel® Z68 Chipset System Configuration
  • CPU: Intel Core I5 2500K
  • RAM: 4 x 4 GB DDR3 1333 MHz
  • Graphic: NVIDIA Geforce 560TI 1GB
  • LAN: Realtek® 8111E
  • Audio: Realtek® ALC887
  • HDD: SATA II WD 250GB 7200
  • DVD Drive: LG BDR
Installation method:

Use flashdrive with Mavericks created by MyHack
1. Boot from the USB. Used -v -f boot flags
2. Format a partition as Mac OS X Extended (Journaled) in Disk Utility
3. Apply default myhack fix. Reboot.
4. Installed RTL81xx for Ethernet driver 5. Installed VoodooHDA 2.8.2 audio driver
6. Disabled sleep in power management. Works:

  • Everything is working, except for sleep! (untested)
Tick.png

[edit] Graphics Cards

Please specify if your card is PCI-E or Integrated.
Also, place chip and board manufacturer in their respective column.

[edit] PCI-E

[edit] AMD/ATI

Model Board-Manufacturer Notes QE/CI Output Dual display Compatible 64bit
Radeon HD 4830 Sapphire
  • Using QE_CI Exotic patch
  • Chameleon 2.0 RC5 (or the most recent) or PCEFI 10.6 Lion + Snow
  • GraphicsEnabler=Yes
Tick.png DVI / DVI Not tested Tick.png
Radeon HD 4850 (EAH4850) ASUS Tick.png DVI / DVI Not tested Tick.png
Radeon HD 5450 Sapphire
  • edit id 68f9 on AMDRadeonX3000.kext, ATI5000Controller.kext
  • Latest Chameleon Bootloader
  • GraphicsEnabler=Yes
  • remember in ATI5000Controller.kext put id in line Cedar Specs
Tick.png VGA / HDMI Not tested Tick.png
ASUS EAH 5570 1GB AMD

Works OOB

Tick.png DVI / HDMI / VGA Yes Tick.png
Radeon HD 5670 ASUS
  • GraphicsEnabler=YES
Tick.png HDMI / DVI OOB Tick.png
Radeon HD 5770 Sapphire Tick.png HDMI / DVI Not tested Tick.png
Radeon HD 6770 Sapphire
  • Using DSDT Inject method
  • Chameleon 2.0 RC5 (or the most recent) or PCEFI 10.6 Lion + Snow
  • GraphicsEnabler => No more need!!!
Tick.png DVI / HDMI / VGA Not tested Tick.png
Radeon HD 6870 Sapphire
  • Using clover and AMDInjection=true
Tick.png HDMI / DVI / DP OOB Tick.png
Radeon HD 7770 GHz Edition 2GB AMD

Clover (v2k r2165)

Tick.png DVI / HDMI Yes Tick.png

[edit] NVIDIA

Model Board-Manufacturer Notes QE/CI Output Dual display Compatible 64bit
GeForce 8400GS 512 DDR3 Galaxy
  • Work OOB
Tick.png DVI Not tested Tick.png
GeForce 8500GT 512 DDR3 Asus
  • Chameleon 2.2 SVN-R2246
  • GraphicsEnabler=Yes
Tick.png VGA Not tested Tick.png
GeForce GT 220 Gigabyte
  • Chameleon 2.2 SVN-R2246
  • GraphicsEnabler=Yes
Tick.png DVI-I / D-SUB / HDMI Not tested Tick.png
GeForce GT 240 1GB GDDR5 Inno3D
  • Chameleon 2.2 SVN-R2250
  • GraphicsEnabler=Yes
Tick.png DVI-I / VGA / HDMI Not tested Tick.png
GeForce GT 430 Gigabyte
  • Chameleon 2.2 SVN-R2246
  • GraphicsEnabler=Yes
Tick.png DVI-I / D-SUB / HDMI Not tested Tick.png
GeForce GTX 560 Ti 1GB GDDR5 ASUS
  • Clover v2 r2656
  • Inject nVidia = True
Tick.png Dual DVI-I / DVI-I-->D-SUB adapter / HDMI Tick.png Tick.png
GeForce GT 570 1280MB GDDR5 Gainward
  • Works OOB
Tick.png Dual DVI-I / DP / HDMI Tick.png Tick.png
GeForce GT 610 2GB DDR3 Twintech
  • Works OOB
Tick.png Dual DVI-I / D-SUB / HDMI Tick.png Tick.png
GeForce GT610 1GB Low Profile ASUS
  • tested with iAtkos ML2
  • Works OOB
Tick.png DVI/HDMI/VGA DVI Tick.png VGA & HDMI -No Tested Tick.png
GeForce GT 620 NVidia
  • Works OOB
Tick.png DVI-I / D-SUB / HDMI Tick.png Tick.png
GeForce GTX 670 Gainward
  • Chameleon 2.2 SVN-R2246
  • No need of additional flags
Tick.png DVI / DVI / Displayport / HDMI Not tested Tick.png
GeForce GTX660 2GB Gigabyte
  • QE/CI Enabled on GM with these kexts from DP8, install with a kext tool
  • GraphicsEnabler=No
Tick.png DVI / DVI-I-->D-SUB adapter Yes Tick.png
GeForce GTX660 2GB Asus
  • Works OOB
  • GraphicsEnabler=No
Tick.png DVI / DVI-I-->D-SUB adapter Yes Tick.png
GeForce GTX 650 1GB GDDR5 Evga
  • Works OOB
Tick.png DVI Not tested Tick.png
GeForce GT 610 1GB GDDR3 Asus
  • Works OOB
  • GraphicsEnabler=No/Yes Optional
Tick.png VGA/DVI/HDMI Yes Tick.png
GeForce 8500GT 512 DDR3 Gainward
  • GraphicsEnabler=Yes
Tick.png VGA, DVI Yes Tick.png
GeForce 9500GT 1024 DDR2 Inno3D
  • GraphicsEnabler=Yes
Tick.png VGA, DVI Yes Tick.png
GeForce 9800GT ECO 1024 DDR3 ZOTAC
  • GraphicsEnabler=Yes
Tick.png DVI, DVI Yes Tick.png
GeForce 9800GT 512Mo Twintech
  • Works OOB, may require DSDT patch
  • GraphicsEnabler=Yes
Tick.png DVI, DVI Yes Tick.png

[edit] Integrated

[edit] INTEL

Model Board-Manufacturer Notes QE/CI Output Dual display Compatible 64bit
IntelHD 4000 INTEL Fitted to laptops such as Acer Aspire v3-571G. Clover: Inject Intel=True, ig-platform-id=0x01660003 Tick.png Built-in LCD + HDMI Yes Tick.png

[edit] NVIDIA

Model Board-Manufacturer Notes QE/CI Output Dual display Compatible 64bit
Quadro NVS 135M NVIDIA Fitted to laptops such as Dell D630/D830. Works OOB Tick.png Built-in LCD + VGA Not tested Tick.png
Quadro NVS 140M NVIDIA Fitted to laptops such as Dell D830. Works OOB Tick.png Built-in LCD + VGA Not tested Tick.png
Quadro FX 360M NVIDIA Fitted to mobile workstations such as Dell Precision M4300. Works OOB Tick.png Built-in LCD + VGA Not tested Tick.png
GeForce 9600M GS NVIDIA AppleGraphicsPowerManagement.kext is needed to be modified Tick.png HDMI output working Not tested Tick.png

[edit] Network Cards

[edit] Wireless

Interface Standard Device Manufacturer Chipset Notes Compatible 64bit
mini PCIe 802.11 b/g/n AR5B91 Atheros AR9281 Working OOB. Seen as Airport Extreme Tick.png
mini PCIe 802.11 b/g Atheros Atheros-based AR9285 Working OOB. Seen as 3rd party card. Tick.png
mini PCIe 802.11 b/g Broadcom Broadcom-based BCM94322HM8L Working OOB. Seen as Airport Extreme Tick.png
mini PCIe 802.11 b/g Dell DW1390 Broadcom-based BCM4311 Working OOB. Seen as 3rd party card. Tick.png
mini PCIe 802.11 b/g Dell DW1390 Broadcom-based BCM4321 Working OOB. Seen as Broadcom BCM4322 Wirless card. Tick.png
mini PCIe 802.11 a/b/g Dell DW1490 Broadcom-based BCM4311 Working OOB. Seen as 3rd party card. Tick.png
mini PCIe 802.11 b/g/n tl-wdn4800 tp-link Atheros AR9380 Working OOB. Tick.png
USB2.0 802.11 ab/g/n W522U Tenda Ralink RT3572 Use Ralink's driver tool v4.2.9.2: http://www.mediatek.com/_en/07_downloads/01_windows.php?sn=502. Then run Ralink Utility at startup to connect. PCI Ven id 0x148f, Prod id 0x3572. Tick.png

[edit] Wired (Ethernet)

Interface Standard Device Manufacturer Notes Compatible 64bit
Internal (PCI-Ex Lanes) 10/100/1000 Realtek RTL8111C Realtek On a GA-EP45-UD3P Rev 1.0. They're detected and they get an IP address thru DHCP but they lose connectivity after a bit ending up with a self-assigned address (169.xxx.xxx.xxx). Tested with Lnx2Mac and Realtek RTL8100SL kexts. Cross.png
Internal (PCI-Ex Lanes) 10/100/1000 Realtek RTL8111D Realtek On a GA-EX58-UD5 Rev 1.0. Works without a problem with newest Realtek RTL8111.kext v.1.2.2. http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/?hl=%20realtekrtl8111

Supports Realtek RTL8111/8168 B/C/D/E/F/G found on recent boards.

Tick.png
Internal (PCI-Ex Lanes) 10/100 Realtek RTL8103E Realtek RTGMac

search for RTGMac_v2.0.6 and take this " MacOS 10.6 on Intel-based Mac computer " version

Tick.png
Internal (PCI) 10/100/1000 Realtek RTL8169SC Realtek [5]

Try using this original AppleDriver as the others such as "Realtek RTL81xx.kext" will not work

Tick.png
USB 2.0 802.11 n / g / b 00062778 WLAN

USB 2.0 150Mbps

Hama Working with UI 4.0.9.6 Drv: 4.2.9.2

https://www.hama.com/webresources/drivers/00062/00062778_macosx107_108_109_dv4_2_9_2_uiv4_0_9_6.dmg

Tested and working properly. Thx to kaefpe.me

Tick.png

[edit] Sound Cards

Interface Hardware Name Manufacturer Notes Compatible 64bit
PCI SigmaTel STAC 92XX C-Major High Definition Audio CODEC SigmaTel It works with VoodooHDA v2.8.4 driver from this link or using this installer (this is the easiest way).

Follow this topic to get it to work.

Tick.png

[edit] Webcams

Interface Item Description Manufacturer Notes Compatible 64bit
USB 2.0 V-UBM46 Logitech - Vision Pro (Mac) Works OOB Tick.png
USB 2.0 A4TECH USB2.0 PC Camera A4TECH Corp. Works OOB Tick.png

[edit] Bluetooth

Type of Accessory Item Description Manufacturer Notes Compatible 64bit
BT module 2.0 Dell DW350 CSR Works OOB Tick.png
BT module 2.0/2.1 Dell DW360 CSR Works OOB Tick.png
Cambridge Silicon Radio USB BT module CD-R King "Cruise" USB Dongle CSR Works OOB Tick.png
BT dongle 2.0/2.1 BELKIN mini Bluetooth USB dongle CSR Works OOB Tick.png
BT dongle 4.0 IOGEAR Bluetooth 4.0 USB Micro Adapter Broadcom Works OOB Tick.png

[edit] USB 3.0 Cards / Adapters

Type of Accessory Item Description Manufacturer Notes Compatible 64bit
PCIe-card with 4 connectors USB3 ALL PCI cards Chipset FRESCO 1100 Works OOB Tick.png

This page was last modified on 10 December 2016, at 05:13.
This page has been accessed 376,179 times.
Powered by MediaWiki © 2015 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki  |   PHP hosting by CatN  |   Designed by Ed Gain   |   Privacy policy   |   About OSx86   |   Disclaimers