HCL 10.11.2

From OSx86
Jump to: navigation, search
macOS 10.11.2
Hardware Compatibility

This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for 10.11.2 builds only.

For how to edit the Wiki, please see this thread. Thank you!

You're looking for an Installation guide? see here

Note: For suggestions about table headings, please join the discussion here.

Contents

[edit] Motherboards

[edit] Abit

Hardware Name Chipset Notes Patches Used

[edit] Alienware

Hardware Name Chipset Notes Patches Used

[edit] Asrock

Hardware Name Chipset Notes Patches Used
H61M-VG3
I7-2600k
Gigabyte GTX 660 OC 2GB 		H61 Used UEFI Bootloader for USB Then Legacy Bootloader Once Installed
ALC662 Audio Not Working, Used A USB Sound Card
Everything Else Works OOB 		None

[edit] ASUS

class="wikitable" width=100%
Hardware Name Chipset Notes Patches Used
P7P55D-E
i5-760
Gigabyte GTX 970 G1 Gaming 		P55 Used Legacy Clover Bootloader for USB
Integrated VT1828S not working correctly
NVIDIA Web Driver - Everything Else Works OOB 		None
P5K DELUXE WIFI
Q6600
ZOTAX GTX 480 		P35 Used Legacy Clover Bootloader for USB
Integrated wlan not working (no driver)
NVIDIA Web Driver 		FakeSMC.kext
JMicron36xATA.kext
LegacyJMB36xSATA.kext
Marvell88E8056.kext
NullCPUPowerManagement.kext

--79.103.61.13 23:13, 14 January 2016 (UTC)|}

[edit] Biostar

Hardware Name Chipset Notes Patches Used

[edit] DFI

Hardware Name Chipset Notes Patches Used

[edit] EVGA

Hardware Name Chipset Notes Patches Used

[edit] Foxconn

Hardware Name Chipset Notes Patches Used

[edit] Gigabyte

Hardware Name Chipset Notes Patches Used
GA Z77 DS3H
I3-2105
Nvidia GTX 650 1GB 		Z77 Ozmosis 1669
+ ALXEthernet-v1.0.2
+ the basic mod's for imessage (All other things work ootb) 		none
GA-Z170XP-SLI Intel Z170 Chipset System Configuration:
  • CPU: Intel Core™ i5-6500 3.2 GHz
  • GPU: ASUS Strix GeForce GTX 970 4GB
  • RAM: 2 x Kingston Fury 8GB DDR4 2133MHz
  • Display: Dell P2416D

Component Status:

  • Shutdown Tick.png
  • Restart Tick.png
  • Sleep Tick.png
  • USB 2.0 Tick.png
  • USB 3.0 Tick.png
  • USB 3.1 Cross.png
  • Ethernet Tick.png : Intel I219-V
  • GPU: Displayport Tick.png, DVI and HDMI not tested
  • Audio: ALC1150, back and front panels Tick.png

See Skylake Starter Guide (<-- Thanks a lot)
All necessary files
Details a bit later

GA-Z170X-UD3 Intel® Z170 Chipset System Configuration:
  • CPU: Intel Skylake i6700
  • Graphic card : ATI HD 7700
  • RAM: 4x8 GB DDR4 @2400Mhz

Component Status:

  • Shutdown Tick.png
  • Restart Tick.png
  • CPU Cstates Tick.png
  • USB 2.0 Tick.png
  • Ethernet Tick.png  : IntelMausiEthernet.kext (Dec '15)
  • Graphic card Tick.png
  • Audio: Onboard ALC1150 Tick.png  : Using patch Script "audio_realtekALC-110_v1.0k.command"
  • Boot Arguments for install : dart=0 PCIRootUID=0 -v kext-dev-mode=1
  • Bootloader: Clover 3320
  • "OsxAptioFixDrv2" in clover.
  • verde.kext
  • USBInjectAll.kext
  • FBName = Futomaki
  • AppleRTC = true, KernelPm=true
  • AppleAPIC.kext patch (thanx pike)

[edit] Intel

Hardware Name Chipset Notes Patches Used
Intel® DH77KC Intel® H77 Chipset

System Configuration:

  • CPU: Intel Core i5-3330 @ 3GHZ
  • GPU: Zotac® GeForce® GTX 650TI
  • RAM: 16GB Kingston® DDR3-1333
  • Hard Drive: 2x HD Kingston SSD Now V300 SV300S37A 240GB 2.5"
  • PIONEER DVD-RW DVR-212D
  • Apple Keyboard with Numeric Keypad
  • Magic Mouse 2
  • SMBIOS set to MacPro3,1

Component Status:

  • Graphics Card works Tick.png
  • Audio Realtek® ALC892 works Tick.png
  • Ethernet AppleIntelE1000e works Tick.png
  • USB 2.0 / USB 3.0 works (All) OOB Tick.png
  • Sleep/Shutdown/Reboot Works (All) OOB Tick.png

Install Procedure:

-> Create the USB Install Disk, add Clover Boot Loader to it, with the options:

  • ACPI: FixShutdown
  • BOOT: darkwake, dart=0, nv_disable=1, kext-dev-mode=1
  • Kernel and Kext Patches: AsusAICPUPM , AppleRTC , KernelPM
  • SMBIOS: MacPro3,1
  • DRIVERS UEFI 64BIT: CsmVideoDxe, OsxAptioFix2Drv and VBoxHfs
  • EXTRA DRIVERS: OsxFatBinaryDrv UEFI
  • INSTALLER KEXTS ( to EFI > CLOVER > kexts > 10.11 )
  • 1) Install AppleIntelE1000e.kext
  • 3) Install FakeSMC.kext
  • Install and Reboot, Boot again the USB Install, but choose the newly installed Hard Drive.

Post Install:

-> Install Clover to the Current Hard Drive with the following options:

  • ACPI: FixShutdown
  • BOOT: darkwake, dart=0, nvda_drv=1, kext-dev-mode=1
  • SMBIOS: MacPro3,1
  • DRIVERS UEFI 64BIT: CsmVideoDxe, OsxAptioFix2Drv and VBoxHfs
  • EXTRA DRIVERS: OsxFatBinaryDrv UEFI
  • SYSTEM KEXTS:
  • 1) Install Realtek ALC892 with audio_cloverALC-110_v1.0o10
  • 2) Install AppleIntelE1000e.kext ( to EFI > CLOVER > kexts > 10.11 )
  • 3) Install FakeSMC.kext ( to EFI > CLOVER > kexts > 10.11 )
  • 4) Install NVIDIA® Web Driver for OSX ® 10.11.2
  • 5) TRIM: Open Terminal, “ sudo trimforce enable ”, will ask you to accept, then reboot. In order to check if it is working, after reboot type in the Terminal " system_profiler SPSerialATADataType | grep 'TRIM' "
Tick.png

[edit] MSI

Hardware Name Chipset Notes Patches Used

[edit] PCWARE

Hardware Name Chipset Notes Patches Used

[edit] QUO

Hardware Name Chipset Notes Patches Used

[edit] Supermicro

Hardware Name Chipset Notes Patches Used

[edit] Graphics Cards

Please specify if your card is PCI-E or Integrated.
Also, place chip and board manufacturer in their respective column.

[edit] PCI-E

[edit] AMD/ATI

Model Board-Manufacturer Notes QE/CI Output Dual display
Radeon™ HD 4830 Sapphire
  • Using QE_CI Exotic patch
  • Clover
Tick.png DVI / DVI Not tested
Radeon™ HD 6770 Sapphire
  • Using HD6770_QE_CI_Patch
  • Clover
Tick.png DVI / HDMI / VGA Not tested

[edit] NVIDIA

Model Board-Manufacturer Notes QE/CI Output Dual display
GTX 570 1280 MB PNY Tick.png 2DVI + DP + HDMI Not tested
GTX 660 OC 2GB Gigabyte Works OOB Tick.png 2 DVI + DP + HDMI Tick.png
GeForce® GTX 650TI 1GB Zotac® Install Notes: Tick.png 2 DVI + 1 mini HDMI Tick.png

[edit] Integrated

[edit] INTEL

Model Board-Manufacturer Notes QE/CI Output Dual display

[edit] Network Cards

[edit] Wireless

Interface Standard Device Manufacturer Chipset Notes Compatible 64bit
USB 802.11 b/g/n TL-WN-823N TP-LINK osx driver on official website cannot be installed on 10.11 but it can be installed using "Pacifist"

open "Pacifist", drag&drop the pkg in "Pacifist" window, then select all elements, click on the "Pacifist" install icon, then reboot, when the key is plugged, everything should work.

Tick.png

[edit] Wired (Ethernet)

Interface Standard Device Manufacturer Notes

[edit] Sound Cards

Interface Hardware Name Manufacturer Notes

[edit] Webcams

Interface Hardware Name Manufacturer Notes

[edit] Bluetooth

Interface Item Description Manufacturer Chipset Notes

[edit] USB 3.0 Cards / Adapters

Type Name Manufacturer Notes

[edit] Keyboard & Mouse

[edit] Wireless

Interface Item Description Manufacturer Model No Notes
Retrieved from "http://wiki.osx86project.org/wiki/index.php?title=HCL_10.11.2&oldid=70919"

This page was last modified on 9 February 2016, at 13:29.
This page has been accessed 70,446 times.
Powered by MediaWiki © 2021 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki   |   Privacy policy   |   About OSx86   |   Disclaimers