HCL 10.4.5/Desktops

From OSx86
Jump to: navigation, search
macOS 10.4.5
Hardware Compatibility

This is a hardware compatibility list ONLY for OEM desktop computers. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying a desktop. Don't forget to add how you got OSx86 running on your x86 desktop computer, and to use proper English. Please see the discussion page for proper instructions on how to input your system specs. Also, please contribute to the HCL 10.4.5 page, which should list a more granular view of compatibility. If your computer isn't listed, you should try it if you have a SSE2 or higher processor. Kernels are available for most configured machines

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for 10.4.5 builds only.

Please list your computers in alphabetical order by manufacturer (Asus, Acer, Dell, HP, etc)

For how to edit the Wiki, please see this thread. Thank you!

Note: Please add whether your device supports QE, Quartz Extreme, graphics. Try playing a movie with Quicktime Player.
Note: Emulated installations do not belong on this HCL.

See the x86 software page for programs you can run without Rosetta.


[edit] Asus Terminator T2-P

Pentium 4 2.8 Ghz w/ HT 1 MB L2 Cache 800 MHz FSB, ASUS MB with i865G / ICH5 Chipset



Sound: ADI AD 1888 - only stereo out

Graphics: Intel GMA onboard - not tested

Graphics: Sapphire Radeon 9600 - works with koverg patch

USB: working, except front USB

SATA: working, Intel SATA onboard

PATA: working, Intel ATA100 onboard

LAN: working, Realtek 10/100 LAN

OS: Dual Booting XP and OSx86, Native Install of 10.4.4 update 10.4.5

Notes: Powersaving works quite perfect. HDD powered down after 10min. CPU-Fan working

[edit] Medion M3 Composer

Pentium 4 3.2 Ghz w/ HT 1 MB L2 Cache 800 MHz FSB Intel OEM D915GUXLK Mainboard w/ the following:


200 GB Seagate 7200 RPM HDD

40 GB Seagate 7200 RPM HDD

Realtek ALC860 High Definition Audio (Onboard)

Intel GMA 900 w/ QE, CI + Open GL, and 2D and 3D acceleration

8:1 Media Card Reader (Works)

Intel SATA onboard card (Works)

Marvell Yukon 10/100/1000 NIC LAN (working)

Creatix V.92 Fax/Data Modem (Not working)

Native Install of 10.4.4

Dual Booting XP and OSx86

Very quiet unless you have crahed OS X which doesn't happen often. Everything works since I got the Intel motherboard...i reccommend everyone get one because i don't have to search for drivers anymore...yay!!!

[edit] Custom Asus P5ND2-Sli Deluxe

Motherboard: Asus P5ND2-Sli Deluxe

Processor: Intel Pentium 4 [email protected] 3.91Ghz, Socket 775

Memory: PQI Extreme 2 Gigabytes [email protected] 667Mhz

Graphics Card: eVGA 6800 XT PCI-E

Sound: Onboard nForce 4 ACL 850 "Works"

Hard Disk: Seagate Barracuda 40GB ATA/133 "Sata Doesn't Work due to have the nForce 4 chipset."

Optical Drives: Lite-On DVD/CDRW Combo Drive, Pioneer 16x Dual Layer Superdrive"

Brief Description: It Says no audio device detected but audio works crystal clear. iDVD will NOT function properly due to no video drivers. System boots up fast no errors Applications load very fast! Ethernet works when plugged into the Intel 10/100/1000 port, nVidia Ethernet does not work.

[edit] Custom Intel D865Perlk

Method: Native install on a PATA disk

Kernel: "Macosx 10.4.4 with 10.4.5 by Myzar" DVD and Security Update 2006-001 by Maxxuss.

Hardware: P4 Northwood (non-SSE3) 2.8GHz, chipset Intel 865, 3Gb RAM, nVidia 6600GT, Ethernet Intel Pro/1000 CT Network Adapter, AC97 on board, _NEC DVD+/-RW ND-4450. Creative Labs SB Live with digital Output non-working for now, dito for the WinTV TV Card (BT8x8).

Comments: Installation process: OK. Ethernet and sound (onboard) from first boot. DVD burner: Burning enabled with patchburn.

I'm testing iTV 0.4 for Intel with my TV Card but couldn't get it running so far. It probably not runs on my machine because there is no nVidia driver and in Vesa mode there is no overlay etc. which i think is needed for iTV to run. And i won't buy a x300 to test :)

[edit] Custom Asus P4P800-SE

Kernel: "Macosx 10.4.4" by Maxxuss & myz

Hardware: Intel Celeron -socket 478- 2,4 ghz-- Motherboard ASUS P4P800-SE, Chipset 865PE-- 2 SATA disc x 160GB p/e-- 2 GB RAM 333 Kingston-- Nvidia 6600 GT Gddr3 aGP8X-- Ethernet, Marvell yukon Gigabit-- SOny DVD RW--

Video: My nvidia not support QE/CI, but with patch "release 5 by Macvidia.com". Added more screen resolution, until 1400x1024 no more. Sound: Out and in, perfect, but system they not detecter like a hardware ( Ethernet:. on board not Work, im installed a generic PCI Ethernet Controller, did work. Memory. No Problem.

screenshot there>> http://www.ivanromero.com.ar/gallery/MAC


p4p800se; cpu pent4 3.0 Ghz; nvidia gforce 6600; samsung np-r40plus

[edit] Dell Dimension 4600

2.4GHZ Pentium 4; Nvidia 128MB GeForceFX 5200; 1GB PC2700 RAM; Intigrated Intel Pro 10/100; Everything works great including the sound. It's being dual booted with Windows XP Media Center Edition 2005. My only complaint is that it's works a little slow, but great for internet crusing.

3.6gHz Pentium 4; ATI Radeon 128MB; 768MB RAM; Integrated Intel 10/100; Everything works including sound and Core Image and Quartz Extreme; Installed off 10.4.5 Myzar DVD-ROM - Dual boot with Windows XP SP2; Systems works fast and Core Image and Quartz Extreme are smooth.

[edit] Dell Dimension 4700c

Motherboard: Intel 915G

Processor: 3.0GHz Intel P4 530

Memory: 1GB SDRAM @ 533mhz

Graphics Card: 128MB (shared memory) integrated Intel 915G

Hard Disk: Seagate ST3160023AS 160GB 7,200rpm Serial ATA

[edit] Dell Dimension 5000

Motherboard: ???

Processor: Pentium 4 HT 3Ghz

Memory: 1GB SDRAM

Graphics Card: ATI Radeon x300

Sound: SoundMax Integrated audio

Hard Disk: 80GB Maxtor SATA HD

Ethernet: Broadcom LAN

Optical Drives: NEC _ND-3530 DVD+-RW

Notes: There is a random bug that occurs on only a few occasions: each time you start playing something through the sound card it plays garbage for 3 seconds then all goes well. On those occasions the clock also ticks at half the speed. cold boot is the only solution. apart from that, everything works OK.

[edit] Dell Dimension 5150

Motherboard: Intel 945

Processor: Intel Pentium D820 3.0ghz

Memory: 1GB SDRAM @ 533mhz

Graphics Card: Intel GMA950

Sound: Onboard Sigmatel HDA.

Hard Disk: Seagate Barracuda 160GB SATA

Ethernet: On-board Intel Pro 100

Optical Drives: Philips DVDRW/DL

Other: Firewire via Sound Blaster Audigy

Notes: 10.4.5 DVD installs flawlessly into beautiful QE/CI enabled environment (1680x1050!) Had to use 10.4.3 AppleHDA.kext to enable audio and add vendor ID for Ethernet to work. Now I can wait for Apple to release their new towers in comfort.

Update: audio seems to boot up into silence unless Extensions.kextcache is removed during the previous boot. I made an rc.d script to remove it after boot or on reboot. Otherwise the box is 100% perfect.

[edit] Dell Dimension 5150c

Motherboard: Intel 945

Processor: Intel Pentium D [email protected] 2.8Ghz, Socket 775

Memory: 1.5GB DDR2 [email protected] 400Mhz

Graphics Card: Intel GMA950

Sound: Onboard Sigmatel HDA

Hard Disk: Seagate Barracuda 80GB SATA

Optical Drives: Lite-On DVD/CDRW Combo Drive, Pioneer 16x Dual Layer Superdrive"

Notes: Detect as two CPU, fully functional. It Says no audio device detected but audio works crystal clear by using 10.4.3 Extensions, output via subwoof (Black), input functions. QE and CI fully functional. System boots up fast no errors Applications load very fast! Ethernet Intel Pro/100 VE Ver.2 works when added Device ID into extensions. Can boot from external USB Storgae after internal install. Extreme hardware similarity as Mac mini but half the price, highly recommended.

[edit] Dell Dimension 8100

Motherboard: Intel 850 CPU: Intel P4 1.7 GHZ Memory : 512MB RDRAM Hard disk : 20 GB ATA Video: Geforce2 MX 200 32MB Sound: SB Audigy 4 & CMI 8738 Optical: LITE-ON DVD-RW Network: 3com 620 Onboard Nic Other: USB Lexmark 238 laser Printer, USB mouse

INstalled it in less than 12 minutes. Had to edit applePS2Controller.kext for the keyboard not to die out after 2 reboots. CMI sound works with 3rd party kext driver. Video works with macvidia. I'm ditching windows now.I have all the apps i need for mac os X. gotta love apple. Gotta buy a real mac tho. Im amazed it worked. Windows Vista sucked on it.

[edit] Dell Dimension 8200

Motherboard: Intel i850E

Processor: Pentium 4 @ 2.4Ghz (Northwood)

Memory: 512MB RDRAM

Graphics Card: 64MB GeForce 4 Ti4200

Audio: Creative SB Live! Value

Ethernet: Realtek RTL8139 and Linksys WMP54G v1(Broadcom chipset)

Optical Drives: Liteon DVD-ROM LTD163 and NEC DVD-RW ND-2510A

Other: USB Bluetooth

Notes: Installed natively using myz 10.4.5 dvd. Running at [email protected] using MacVidia Beta 2 Build 2. Realtek card works right out of the box. WMP54G works after replacing IO80211Family.kext (see forum topic#13430). Audio does not work. DVD writing and Bluetooth work as expected.

[edit] Dell Dimension 8300

Pentium 4 HT @ 3GHz (No SSE3 or NX) -- ATI Radeon 9800 Pro -- 1GB SDRAM -- On board AC97 Audio (Creative Audigy 2 card not working or recognized by OSX) -- Onboard Intel Pro Network -- Samsung SM348B DVD/CD-R and NEC ND-3450 DVD-R

Installed 10.4.3, 10.4.4, 10.4.5 on this machine with no problems. 10.4.5 installed both with pre-patched myz DVD and by update via Maxxuss routine. AC97 Audio has both input and output. Go to the Audio/MIDI setup in Utilities, set the output as 6 channel. To get sound out from green (usual) plug, use the speaker configuration, set speakers to channel 3 and 6. Channel 1 and 2 will come out the black plug. Audio input working. DVD-R and CD-R working fine, works with Titanium. Firewire on Creative Audigy card working. USB working DVD player working. iLife working. All software (lots tried) working so far. Moderate mouse tearing with the ATI 9800 graphics card, fixed somewhat with Mouseposse. -- Also bootable from USB drive. (After installing to the drive connected to PATA, then putting the drive into a USB enclosure and selecting boot from USB drive in boot menu)

[edit] Dell Dimension 9150(Saraben MacInDell)

Motherboard: :Intel 950 Chipset

Processor : Pentium D (3.4Ghz 2mb L2 Cache x 2)

Memory : 1024mb x 3 (667Mhz FSB)

Video: Geforce 7900GS with 256Mb

Audio: Internal Sigmatel

Ethernet: Internal 1Gbit / 100mbit

Keyboard: Logitech Wireles diNovo

Notes: Booted with Kalyway 10.5.1 installed natively into a partition of my main harddrive 7900GS full graphic acceleration. Everything works on this rig. Audio/Lan/USB/Firewire

[edit] Dell Dimension 8400

Motherboard: Intel 925X Express chipset

Processor: Pentium 4 up to 560 Series

Memory: Up to 4GB dual channel DDR2-hukommelse 533MHz

Graphics Card: GeForce 6800

Audio: ADI 198x

Ethernet: Integrated Broadcom Gigabit Ethernet 57xx

Optical Drives: NEC ND-3450 (Burn capability but unsupported by apple) / Generic 16x DVD-ROM Drive (Works...)

Notes: Did a 10.4.5 install using generic install DVD

No graphics acceleration but overall still fast.

Audio works if you plug the audio jack into the black slot, you might also want to use the 10.4.3 AppleAC97Audio.kext if your volume control is messed up.

No ethernet.

[edit] Dell Optiplex 170L

10.4.4 Native DVD install upgraded to 10.4.5 from Patch and Maxxuss Instructions.

Chipset: Intel 845

Video: Integrated 845G/GL - Works in Vesa3 1280x1024x32 - Set Video Buffer to 8M in BIOS - No AGP Slot :(

Ethernet: Intel 10/100 LOM Works

Audio: Intel ICH5 (Soundmax) - Works w/ AppleAC97Audio - Switch Speaker Output to 3,4 in Audio MIDI Setup Utility



I used appleac97 audio driver. (appleac97audio.kext) I used kext helper b7 to install the kext. This makes it much easier.

Once installed go to midi audio settings and configure left and right channels to be channel 3 and channel 4. Thats all. It took me days to figure this out. Hope it helps others.

[edit] Dell Optiplex GX240

Pentium 4 Wilamette 1.5 & Northwood 2.53, 512 RAM, ATI RAGE 128 Pro (16 mb)

InstaERRRRRing runs! (Onboard Sound/LAN, USB) Video natrually does not install completely, but defaults to 1024x768 fine.

[edit] Dell Optiplex GX260

Patched 10.4.4/5 amd-intel sse2-3 dvd. Everything works smooth. Increase video memory to 8MB in BIOS before install. Gets 1024x768. Network works as built-in ethernet. Sounds works. Installed on external USB disk for fun.

[edit] Dell Optiplex GX270

Intel Pentium 4 Prescott, 1gb RAM

Patched 10.4.4/5 amd-intel sse2-3 dvd.

All is working except I have an nVidia GX AGP card.

The Macvidia driver solved this

very impressive

[edit] Dell Optiplex GX280

Maxxus Patched 10.4.5 install DVD

Install from scratch, audio and QE worked out of the box.

P4 3GHz is recognised as a 3.6GHz

Network not working because I haven't tried yet.

Using IDE HDD instead of the SATA but the SATA drive still appears on my desktop (Only because I don't want to wipe the SATA).

Update: Can't get Broadcom 1677 working. Installed Realtek 8139 which works out of the box.

Update: SATA works Fine, audio didn't work out of the box for me but I got it working. No onboard network for me either. Installed a 3 euro realtek, works like a charm!

Base Specs

Intel Celeron 2.4gHz
256MB Memory
40GB Maxtor IDE Hard Drive
Intel Integrated Graphics
Realtek Integrated Audio
Broadcom LAN Controller

Changed Specs

Added 512MB Memory = 640MB Total
Added NVidia GeForce2 MX400 PCI Card


Installed Mac OS X 10.4.5 using Myzar pre-patched DVD
Integrated Graphics did not work (greyscale 1-bit screen)
Installed NVidia GeForce2 MX400 PCI Card - NO Core Image or Quartz Extreme - Viewable but stuck at [email protected]
Installed MacVidia 1.0.8 Driver - Still NO Core Image or Quartz Extreme but able to switch resolutions - Supports up to 1400x1050 - Prefer using 1152x864 for viewing
EDIT: After rebooting, I was getting "Out of Range" Error on my monitor. Searched MacVidia Forums and downloaded CSCREEN to /usr/sbin. Added the following line to /etc/rc: /usr/sbin/cscreen -x 1152 -y 864 -r 85 -d 32. Reboot and able to view the screen again.

[edit] Dell Optiplex GX620

Macosx 10.4.4 with 10.4.5 by Myzar Install DVD

Success upgrade from 10.4.3 and native install... Network still not working ( Broadcom 5751), audio working with kext from 10.4.3.

(USB Ethernet adaptor works fine

Anyone care to note which kext needs replaced?

For onboard Ethernet Adapter(Broadcom 5151) you need to modify/replace the AppleBCM5751Ethernet.kext For onboard Sound you neet to modify/replace the AppleAC97Audio.kext

For wireless I used the Linksys WPC54G pci card and modified IO80211Family.kext with vendor and device ids.

[edit] Dell PowerEdge 400SC

P4 2.8ghz HT 800mhz FSB

Macosx 10.4.4 with 10.4.5 by Myzar Install DVD

On-board ethernet works out of the box. Sound works after running MIDI Selector utility. AGP Radeon 8500 All-in-Wonder detected as VESA, works at 1280x1024, on the bright side the Firewire port on the Radeon was detected and is working. No SSE3 or QE/CI, though so not a particularly usable system in this configuration.

[edit] Gateway 504GR

Macosx 10.4.4 with 10.4.5 by Myzar Install DVD

Did upgrade from 10.4.3 straight to 10.4.5, everything still works (except sound of course).

[edit] Gateway 420GR

Mac OS X 10.4.5

Gateway 420GR P4 2.93GHz Intel D915GAG 512 DDR Ram ALC660 Audio (works in HD)(no input though) Onboard GMA900 (QE and CI supported) Lite on DVDRW 160GB SATA drive

Pretty much everything works after install from Jas universal install DVD 10.4.5 Just had to fix permissions of applePS2Controller.kext after first reboot. sound don't show up in system profiler but it works nice, and you can adjust volumes.

[edit] HP COMPAQ D530 CMT

Pentium 4 550 @ 3.2GHz (SSE2 only) 1GB Memory Broadcom NetXtreme Ethernet for HP (PCI) (it really is a 57xx type card) (Vendor ID: 14e4, device id: 1696)

Did 10.4.5 install using generic install DVD. All things work except ethernet. Network card is Broadcomm 57xx. After following instructions on http://forum.osx86project.org/index.php?showtopic=8162, the ethernet card started working. Haven't found any other problems yet.

[edit] HP Compaq Evo D500 SFF

Pentium 4 1.8 GHz (SSE2 only) 640 MB RAM Onboard Ethernet works Did install with universal 10.4.4/10.4.5 DVD, installed Intel and SSE2 patches, as well as 10.4.5 upgrade. Included OEM AGP video card (nVidia Vanta) worked at 1024x768. Upgraded to a low-profile AGP video card, nVidia 5200, getting 1600x1200, see macvidia.com (make sure the card is low-profile, it won't fit otherwise!!) You will have to remove the slot cover from the new AGP card; removes easily with common tools. Audio works, but first few seconds are garbled, and audio plays too fast.

[edit] HP Dc7100

Method: Native install in a SATA disk

Kernel: "Macosx 10.4.4 with 10.4.5 by Myzar" DVD

Hardware: P4 3GHz, chipset Intel 915, 2Gb RAM, Intel GMA900, Ethernet Realtek RTL8139, AC97 on board, Pioneer DVD-RW DVR-110D

Comments: Installation process: OK (only if I select the patch "Maxxuss ownage" during the installation process). Ethernet and sound from first boot. The 10.4.5 system seems to be faster and more stable than 10.4.3 / 10.4.4. QuartzExtreme, DVD burner...

HP dc7100 CMT - Used MacOSX_10.4.4DVDPATCHED_Myz.iso which upgrades to 10.4.5 post installing, then turned off auto-updates. Used Kext_Helper_b7 to apply kext files(which did not work anyway).

Hardware: P4 530 Prescott 3.00GHz, chipset Intel 915, 2Gb RAM, Intel GMA900 works fine with 100% sleep/power/screensaver functionality and plays all vids fine. Tried a ASUS EAH ATI Radeon 3450 PCIe DDR2 256MB but that caused sleep issues where the monitor would not turn off, and would not play all vids anymore so a big step down from the onboard GMA900 full functionality which shows up as 256MB vRam, AC97 on board, TSST SH-S202J DVD burner, built-in Broadcom 57XX NetXtreme Gigabit NIC fails so added a Kingston pci NIC:

Base install detected AC97 sound, video, USB flash detection, DVD, USB mouse and keyboard, only the NIC not detected:

Radeon 3450(better to use onboard GMA900) change boot default 1024x768 resolution to 1280x1024 for a usable LCD display. Was working then tried to update to 3450 natit_x2000 kext(10.5 drivers) but could not boot and had to reinstall. The built in Intel GMA900 worked fine but did not try 1280x1024 with this. Followed the guide http://wiki.osx86project.org/wiki/index.php/Tips_And_Tricks#Messing_with_the_boot_options. Note, had to do it twice for it to work and the com.apple.Boot.plist file was hidden. Had to copy and paste the commands into the Terminal window as per the guide and it worked eventually.(even though I could not browse to the com.apple.Boot.plist file).

Built in Broadcom 57XX NIC failed, and followed all the guides but it still did not work with either kext(AppleBCM5751Ethernet, AppleBCM5701Ethernet). After fighting for a few days just added an old Kingston pci NIC which worked immediately. Save yourself time and find another NIC if the built-in Broadcom is not detected immediately.

[edit] HP Pavilion 533w

Method: Native install to IDE hard disk

Software used: Marklar MacOSX 10.4.4 -and- Maxxuss MacOSX 10.4.4-10.4.5 Patch


ASUS P4G533 Motherboard, Socket 478 --

CPU, 2.0 GHz Celeron --

Intel Chipset, 845GL --

Intel Chipset, "South Bridge" ICH4 --

AC'97 CODEC Device, Realtek ALC202A --

Ethernet 10/100 LAN, Realtek RTL8100 --

everything works except sound and QuartzExtreme, CoreImage

Had to set Video memory to 8M in BIOS --

Not shure about the burner - replaced unit, with DVD only drive, Lite-on SOHD-167T-05

[edit] Dell PowerEdge 400SC

Macosx 10.4.4 with 10.4.5 by Myzar Install DVD

Hardware: P4 2.8GHz, HT. 384MB DDR RAM. 82540EM Giga NIC, SATA, Intel ICH5 AC97 SoundMax 1980. Sapphire 9600 Pro.

Everything works out of box except sound, which needs AppleAC97Audio.kext and the following modification to AppleAC97CodecAD198x.kext/Contents/Info.plist (adding ADS70 for SoundMax 1980):

<key>PNPVendorID</key> <string>ADS70 ADS75 ADS74 ADS73 ADS72</string>

[edit] Acer Aspire T135-S880

Macosx 10.4.5 by Myzar Install DVD native install on PATA HDD

Hardware: AMD Sempron 3000+. 512 Mb DDR Ram. Realtec nic. VIA chipset. Connect3D Radeon 9550 256 MB AGP. NEC-3500A DVD-burner Everything working except SATA. Easily fixed with a search in the forums. QE,QE2,CI with mousetearing after editing appropriate kext. Smooth install and excellent performance.

[edit] IBM ThinkCenter M51

Kernel: Mac OSX 10.4.5 8G1454

Hardware: Intel® Pentium® 4 Processor 540 with HT Technology, 1GB RAM, 40GB 7200RPM S-ATA HDD, PCI Tower (4x5), Intel Graphics Media Accelerator 900, 48x32x48x16x CD-RW/DVD, Broadcom 5702 10/100/1000 Ethernet

Comments: Everything worked out of the box except for the integrated Broadcom ethernet. Added the PCI vendor/device IDs to the 5701 driver plist and hex edited the binary for the driver to load correctly.

[edit] HP DC 5100

MacOS X 10.4.5 Install by Myzar DVD on SATA HD Everything works except ethernet. GMA 900 is QE/CI enabled. Sound works, but internal speaker doesnt. You need externals This is the "perfect" hackintosh! I put in a Realtek PCI and a WG311t netgear and im very happy!!!

[edit] Advent T9201

Originally 512 mb ram (Now 1024 mb) 3,4ghz ht Prescott processor 250 gb Sata Maxtor New Radeon 9600 pro to get QE and CI working Worked out of the box because of the sse 3 processor Internet also works with realtek card and AC97 audio card works right after install Had a problem with my former card was broken so I got a 9250 not able to get decent results so bought the 9600 pro and it works out of the box.

[edit] Gateway 840GM

Base Specs
Intel Pentium D 830 3ghz (SSE2, SSE3, NX, EM64T, etc)
250 GB Western Digital (SATA)
Intel 945G Chipset (Lakeport-G, Intel GMA950)
Gigabit Ethernet and Firewire ports

Changed Specs
Nvidia 7800GT 256MB
40 GB Samsung (IDE)
DLink 100mbit Adapter (RTL8139)
SIIG ATA133 IDE Adapter

Installed it through VMWare 5.5--I installed it on a older 40gb because I didn't think it would work on my SATA drives (plus it was mainly full of data anyway). update It did see all my SATA hard drives after all
The other IDE adapter didn't work with it, had to use the onboard IDE; which means no DVD drives ;_;
It did boot with the GMA950 enabled but stalled with a blue screen (oh the irony), but I rebooted with the Nvidia card and all was well. Stuck at the default 1024x768-60 though.
The onboard sound (SigmaTel HDA) is not currently detected.
The onboard Ethernet (Broadcom NetXtreme) is not detected either; hence the need for the DLink adapter to get online.

[edit] MSI MPC 915 Barebones

Base Specs
Intel Celeron D 3.6gHz
1GB DDRII Memory
80GB Maxtor IDE Hard Drive
Intel Integrated GMA 915 Graphics
RealTek ALC880 HD Audio
RealTek Gigabit LAN Controller
7-In-1 Card Reader

Changed Specs
NetGear WG311T PCI Wireless Card

Installed from 10.4.5 Myzar DVD - Dual Boot with Windows XP SP2
Core Image and Quartz Extreme support due to GMA 915 Chipset
Sound works - Realtek LAN works - 7-in-1 Card Reader works
Installed NetGear WG311T PCI Wireless Card - Recognized as Airport
All above hardware components worked out-of-box without modifications
Running iTunes 7, Firefox 2 and Thunderbird 1.5 (with WebMail Extensions)

[edit] Custom Intel P4 on 850MV motherboard

P4/intel 850MV/512MB RIMM memory/64 MB Ati radeon 7000 I Did install it with universal 10.4.4/10.4.5 DVD iso and VMWare 5.5, installed Intel and SSE2(with SSE3 installation will no work) patches and 10.4.5 upgrade. At the beginning sisten do not run on the VMWare 5.5 but when I put the H.D. with the OSX instalation to boot native it runs. Usb mouse Working, Keyboard not working, video working only at [email protected], sound not working.

[edit] Custom Intel P4 on D845EBG2 motherboard

2007/02/07 install day

Installed from 10.4.5 Myzar DVD - Dual Boot with Windows XP SP1

P4 2,4 Mhz, 640 MB RAM, 64 MB NVIDIA GX400, HD 40MB, DAVICOM Netword card, LD DVD BURNER

I did native install with no problem, sound works, network works, usb ports work, recognize my flash drive, DVD for viewing movies do not work

For burning programs it works fine, Itunes work, but upgade to Itunes 7 does not, someone knows why?

QE and Core image do not work

Recognized as an 3.0GHZ MAC

Contact me at [email protected]

UPDATE: Does not boot from USB Drive msg: "Boot loader error"

emachines t8332

Works great. recomened to get a videocar and more ram. only thing it has problems with is the usb. but i never took the time to find a kext. some usb stuff works like my usb floppy drive. . . . . .

This page was last modified on 26 February 2012, at 17:48.
This page has been accessed 319,499 times.
Powered by MediaWiki © 2021 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki   |   Privacy policy   |   About OSx86   |   Disclaimers