This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.
| Hardware Name
|
Chipset
|
Notes
|
Patches Used
|
32/64bit working with patches
|
| G31M-S R2.0
|
INTEL G31
|
System Configuration:
- Model Name: Mac Pro
- Model Identifier: Mac Pro 3,1
- CPU: Intel Core 2 Duo E4500
- GPU: ATI Radeon 6350(HP OEM)
Component Status:
- Audio Works with patch
- Ethernet Works with patch
- Graphics Works with QE/CI
- Dual Monitors using VGA and DVI from Single Video Card
- Only Sleep does not work
Installation Guide:
Default BIOS settings if installation freezes, Disable Legacy USB support
- Boot from DVD
- It will take 5-15 Minutes that you will be stock on the apple loading screen, but it will still load to the installation setup(Be Patient)
- Partition your Hard Disk in the Disk Utility
- Just Install the iAtkos OS X deselect other choices on the customization of your installation
- After login apply the necessary patches.
|
- System Utilities(Repair Permissions)
- Audio = VoodooHDA 0.2.1
- Network = Realtek Gigabit Ethernet 2.0.6 for 10.7
- Miscellaneous = PS/2 Keyboard & Mouse/Trackpads
- OSx86 Software = Kext Utility
- Graphics =
- Locate ATI5000Controller.kext and ATIRadeonX3000.kext from /System/Library/Extensions
- Open package content and edit the Contents/Info.plist for both ATI5000Controller.kext and ATIRadeonX3000.kext.
- Edit Info.plist(Need Admin privileges)
- find <key>IOPCIMatch</key><string>...</string> for both kexts
- insert 0x68f91002 inside the <string>...</string> ex.: <string>0x68f91002 ...</string>(note just insert it and do not modify the other strings. Apply step 3, 4, 5 for both kexts)
- then save the modified kexts.
- install them using Kext Utility.
- then Restart
- Additional Note: I use iAtkos L2 so this patch works for 10.7.2 and 10.7.3
|
|
|
| 4Core1600P35-WiFi+
|
Intel® P35 + ICH9R
|
System Configuration:
- Model Name: Mac Pro
- Model Identifier: Mac Pro 3,1
- CPU: Intel Core2Duo 3Ghz E8400
- GPU: nVidia G210 1gb Dual VGA/DVI
- RAM: 8gb DDR3 1333
- Audio: Intel HD Audio Built-in ALC870 [same as ALC889a]
- Ethernet: Onboard Realtek RTL8111/8168B [10ec:8168]
Component Status:
- Audio works using MultiBeast ALC8xxHDA & AppleHDA Rollback & ALC885/889a Non-DSDT HDAEnabler [1]
- Ethernet works with kext [2], however I could not get this to work as Built-in Ethernet which is required for App Store and iCloud to operate correctly. I had to add a separate Network Card (RTL8139 in this case) which was detected as Built-in Ethernet. I actually use the onboard network card as I have found the RTL8139 to be a bit flaky at times but, without it installed, I could not use App Store etc.
- Graphics card works with NVEnabler64 [3]
iAtkos L2 Installation Guide:
- First, the BIOS of the motherboard needed to be updated 1.40 to add support for the E8400 processor.
- Enter the BIOS and make sure that SATA mode is set to AHCI. No other settings were required.
- Insert DVD, let boot. Will take 5-15 minutes to come up. Use Disk Utility to prep your partition for install.
- Proceed. Select the partition you just got ready, then hit Install. I did not choose any non-standard options, nor Graphics Enabler.
- After install and reboot, you'll see the next setup screens (time zone select, etc). Proceed and you should be at desktop.
- Install your Graphics, Audio and Network kexts as linked above. [4]
- Download Champlist [5]
- In Champlist, choose Configuration and select: Use Kernel Cache, Ethernet Built In, Hide 'boot', Restart Fix, PCIRoot=1. Save this, it will modify the org.chameleon.Boot.plist in the /Extra folder at the root of your Mac drive.
- Then select SMBios, select MacPro3,1 and use Serial Generator to choose CPU as the MacPro3,1 from the 2008 section. Save this to your /Extra folder at the root of your Mac drive.
- Reboot and you should be in action. I was able to update to 10.7.3 no problem using Software Update, as well as all other updates that were available.
|
|
|
|
| Z68 Extreme4 Gen3
|
Intel Z68
|
UPGRADED TO 10.8.3 WITH 100% SUCCESS AND MORE STABILITY. BELOW HAS DEPRECIATED.
System Configuration:
- Model Name: Mac Pro
- Model Identifier: Mac Pro 3,1
- CPU: Intel i5-2500
- GPU: Nvidia GTS 250 1gb (Intel onboard doesn't work, see notes)
Component Status:
- Audio works with kext
- Ethernet works with kext [6]
- DSDT precompiled just for this mobo [7]
- Only Sleep does not work
Installed with 2 methods, both work 100%: iAtkos L2
iAtkos L2 Installation Guide:
- Insert DVD, let boot. Will take 5-15 minutes to come up. Use Disk Utility to prep your partition for install.
- Proceed. Select the partition you just got ready, then hit Customize.
- After install and reboot, you'll see the next setup screens (time zone select, etc). Proceed and you should be at desktop.
- Install your Audio and Network kexts as linked above.
- You should be fairly setup now.
Installation Guide:
- Approx the same as iAtkos. Only difference is, when you get to setup phase two (after reboot) if everything is going very slow, you'll need to (if you can) load your drive as slave onto a real Mac or another mackintosh.
- Guide: This guy helped me get things working great (except sleep).
- DSDT: Use the DSDT file I linked earlier.
- SMBIOS: Do not change the SMBIOS from what is default installed. It should be MacPro3,1 by default. If you try updating it to MacPro5,1 like I did, your Mac will stop booting and you'll have to start over (or clone from a backup like I did)
- Cloning: Speaking of which, once you get to your desktop, I highly recommend making a clone to another partition/USB drive of your hard work so far. I had to reclone 4 times during the process from making mistakes, and my clone image saved me many hours. Use CCC (Carbon Copy Cloner) or your favorite app.
- Booting: Make sure you are using Chimera v1.7.0 (or higher) for your bootloder instead of Chameleon. Chimera is a fork and is required for your mobo.
- Networking: After installing the networking kext provided earlier, you want to make sure you *COPY* (not move) it in /System/Library/Extensions/ but to do so you'll need to delete the one thats already there first (cannot overwrite) then copy in, then use KextUtility to rebuild caches. Then reboot. If it works after reboot, keep that extra copy nearby. You may have to reinstall it once more at some point (like on an update to 10.7.4) as Apple overwrites them again. For the same reason, keep your audio and other custom kexts too.
- Graphics: Intel Integrated Graphics does not work on setup. I was able to install with iAtkos methods just fine with integrated graphics (no graphics card), but after reboot before setup phase two (time zone select, etc) my system just hung at a big off-white screen with Apple logo in the center. I could move the mouse but never did anything. But as soon as I installed a graphics card (for me, Nvidia GTS 250 from my old build) it worked like a charm right away. I think having GraphicsEnabler in chameleon.plist helped but it may be stock with Apple now. You'll need to handle your own graphics card situation. PS- I never tried the Integrated Graphics again after doing setup because I decided to keep my old graphics card afterall.
|
- System is LIGHTNING FAST! Here is my full setup and my GeekBench stats:
- Intel i5-2500 @ 4.1 (no k)
- ASrock Z68 Extreme4 Gen3
- G-SKILL 16gb DDR3-1333 CAS 7-7-7-21 (as 4x 4gb sticks)
- Nvidia GTS 250 1gb
- Crucial M4 SSD 6gbs 64gb & OSX 10.7.3 = System boots cold to ready in < 20 seconds.
- Overclocked i5 from 3.3 to 4.1 ; BCLK from 100mhz to 102mhz. (If I had gotten the i5-2500k instead, I could OC to 4.7+)
- GeekBench Score @ 64-bit SingleTest=11028; 64-bit StressTest peak=14468
|
|
|
| Z68 Extreme3 Gen3
|
Intel Z68
|
System Configuration:
- Model Name: Mac Mini
- Model Identifier: Mac Mini 5,1
- CPU: Intel i5-2500k
- GPU: Intel HD-3000
- SSD: Corsair Force 3 Series 120GB (HDD works also)
Component Status:
- Audio: should work (but not over HDMI - i use an extern sound card)
- Graphic: Sometimes glitches in pictures or videos
Installation Guide:
- First of all purchase a legal Copy of Lion OSX.
- Create an USB-Stick with UniBeast. (Google is your friend)
- Boot from your new Stick (Hit F11).
- Prepare your Harddrive with Disk Utilities and make it a Mac OS Extended (journaled).
- Install on your this partition and wait for reboot. Don´t remove the USB-Stick.
- Select your OSX Partition (not USB)
- After install and reboot download MultiBeast and apply the following patches.
|
Patches
- System Utilities = (Repair Permissions)
- Audio = Realtek ALC8XX + ALC892
- Disk = Trim Enabler (SSD only)
- Bootloaders = Chimera 1.9
- System Definitions = Mac Mini
Upate
|
|
|
| ASRock Fatality Z68 Professional
|
Intel Z68
|
System configuration:
- Intel Core i5 2600k
- Chipset Intel Z68
- 16GB Corsair Vengeance [email protected] 1600mhz / 4 X 4GB
- NVidia GTX 570 (EVGA GTX 570 SC)
- Audio ALC8xx (MultiBeast Realtek)
- PCI-e Network Card (RealtekRTL81xx.kext)
Installation method:
- iATKOS 10.7.3
- Combo Update to 10.7.4
- Audio (Realtek ALC8xx)
- Graphics (NVidia 4xx/5xx Support: 10.7.2+Combo) /
- NVidia Hermes Driver 270.00 Download (nvidia.com)
- NVidia Cuda Driver 4.2.7 Download (nvidia.com)
- Note: Set bios to default, Set storage to AHCI, unhooked all USB devices except keyboard & mouse.
- (Did not remove any ram or NVidia GPU for installation)
|
Working:
- Shutdown/Reboot
- Mac App Store
- iCloud
- Both DVI ports.
NOT Working:
- Doesn't wake up from sleep mode
|
|
|
| P45TS Sockel 775
|
Intel® P45 + ICH10 Chipsets
|
System Configuration:
- Model Name: Mac Pro
- Model Identifier: Mac Pro 3,1
- CPU: Intel Core2Duo 3Ghz E8400
- GPU: nVidia 9600GT 512mb DVI/DVI/HDMI
- RAM: 6gb DDR2 800mhz
- Audio: Intel HD Audio Built-in ALC888 [same as ALC889a]
- Ethernet: Onboard Realtek RTL8111/8168B [10ec:8168]
Component Status:
iAtkos L2 Installation Guide:
- Enter the BIOS and make sure that SATA mode is set to AHCI. No other settings were required.
- Insert DVD, let boot. Will take 5-15 minutes to come up. Use Disk Utility to prep your partition for install.
- Proceed. Select the partition you just got ready, then hit Install. I did not choose any non-standard options, nor Graphics Enabler.
- After install and reboot, you'll see the next setup screens (time zone select, etc). Proceed and you should be at desktop.
- If Waiting for Boot prompt on boot, use rd="disk()s()" in Chameleon
- Update to 10.7.3 very good
- internal HDD´s are external
|
|
|
|
| Hardware Name
|
Chipset
|
Notes
|
Patches Used
|
32/64bit working with patches
|
| P7H55D-M EVO
|
Intel H55
|
System:
- CPU: Intel Core i5 650
- GPU: GeForce GT 9500 1024 MB
- RAM: Kingston DDR3 1333 MHz 2 x 2 GB
- HDD: Samsung 500 GB SATA
- Audio: Realtek ALC 889 onboard
- Ethernet: Realtek 8112L Gigabit onboard
- Wi-Fi: D-Link DWA-556 (recognized as AirPort)
- Bluetooth: D-Link DBT-122
- Shutdown: Yes
- Restart: Yes
- Sleep: Yes
- iCloud: Yes
- Mac App Store: Yes
|
Installation method:
- Clean installation of Mac OS X Lion 10.7.3.
- Custom DSDT used
Post-installation:
- System definition: iMac11,1
Other patches applied:
- AppleHDA for ALC889
- 3rd Party SATA
- Lnx2Mac's RealtekRTL81xx Ethernet
|
|
|
| P7H55D-M EVO
|
Intel H55
|
System:
- CPU: Intel Core i5 650
- GPU: GeForce GT 9500 1024 MB
- RAM: Kingston DDR3 1333 MHz 2 x 2 GB
- HDD: Samsung 500 GB SATA
- Audio: Realtek ALC 889 onboard
- Ethernet: Realtek 8112L Gigabit onboard
- Wi-Fi: D-Link DWA-556 (recognized as AirPort)
- Bluetooth: D-Link DBT-122
- Shutdown: Yes
- Restart: Yes
- Sleep: Yes (see comments)
|
Installation method: Clean installation of Mac OS X Lion 10.7.3 downloaded from Mac App Store. No custom DSDT used.
Post-installation:
Patches applied:
- ALC8xxHDA
- AppleHDA Rollback
- HDAEnabler ALC889
- Lnx2Mac's RealtekRTL81xx Ethernet
How to make 'sleep' work:
- You should NOT install USB 3.0 kext if you want 'sleep' to work.
- You must add the following lines to /Extras/org.chamaleon.Boot.plist:
<key>GenerateCStates</key>
<string>Yes</string>
<key>GeneratePStates</key>
<string>Yes</string>
|
|
|
| P8H61-M-LE
|
INTEL H61
|
System Configuration:
- CPU: Intel Core i3 2100
- GPU: Powercolor HD6670 1Gb GDDR3
- RAM: Kingston DDR3 1333 4Gb x2
Component Status:
iCloud, App Store(with ethernet fix), System Update
|
Patches
<key>iGain</key>
<string>0</string>
<key>iMix</key>
<string>70</string>
<key>Mic</key>
<string>70</string>
Then save and run Kext Utility. Then Reboot.
|
|
|
| P5Q-E
|
INTEL P45
|
System Configuration:
- CPU: Intel Dual Core e5200
- GPU: Sapphire HD4670 1Gb GDDR3
- RAM: Kingston DDR2 800 (910max) 2Gb x2
Component Status:
install İATKOS L2 + 10.7.3 combo on ich Barracuda. ident for core 2 duo, RV730 ok but 9470 string in boot appear. Panic with Paragon 9.5.x and in first reboot after update, tuxera 2011 ok
|
Patches
- AHCI injector for ICH10R + AppleVIAata 6121 . Deleted NullCPU after DSDT modded c4 in /Extra
|
|
|
| P5QL-E
|
INTEL P43
|
System Configuration:
- CPU: Intel Core 2 Duo e8500
- GPU: nVIDIA 9800 GT 512MB GDDR3
- RAM: Corsair DDR2 800 2Gb x 4
Component Status:
install Retail Appstore 10.7.3 using Chimera. Install and boot again from USB, then choose your new installed volume and some necessary kexts
Howto: [10]
(CPUID Max Value Limit in Bios causes OSX to use only one core, so turn it off)
(Use AHCI for SATA Controller!)
|
Patches
I used Kexthelper for both of the kexts.
|
|
|
| P5W DH Deluxe WIFI
|
Intel 975X Intel ICH7R
|
System Configuration:
- Intel Q6600 CPU 2,4 GHz
- NVIDIA GTS 250 (1GB DDR3)
- Install Method: IATKOS L2 and upgrade via system updates
Components Status:
- Audio ALC882M Stereo L+R - Line-Out -- Installing ALC882 Kext after systen update
- Ethernet - Native Works (Marvell Yukon Gigabit 88E8053)
- USB 2.0 - Native Work
- Firewire Pci Card - Native Work
- IDE - Native all Work
- Jmicron 36x ATA -- Installing kext
- Shutdown/Reboot/Stop - Work...
- 100% COMPATIBLE
|
Patches
- Audio ALC882 Kext: [11]
- Jmicron36x Kext: [12]
|
|
|
| P8Z68-V-LX
|
INTEL Z68
|
System Configuration:
- CPU: Intel Core i7 2700K
- GPU: AMD HD5750
Component Status:
- All works. USB 3.0 DOES NOT
install İATKOS L2 + 10.7.3 update from apple
|
Patches
- Defaults + AHCI sata + PCI Root ID + RTL81xx. Don’t select any audio kext, because dosent work. I found Wodoo kext for audio and VGA HD5750
- USB 3.0 WORKS. Follow http://www.osx86.net/downloads.php?do=file&id=2309 exactly. Will need Windowns 7 partition for 1 task.
|
|
|
| P7H55D - M EVO
|
INTEL H55
|
System Configuration:
- Case: PowerMac G5
- CPU: Intel Core i3
- GPU: Nvidia 9500GT 1GB(Out of Box)
- Dual Monitors using VGA and DVI from Single Video Card
Component Status:
After using Mac App Store 10.7.1 I was able to use the 10.7.2 ComboUpdate. I was then able to use the 10.7.3 ComboUpdate.
|
Patches
- Chameleon (from Voodoolabs) + arch=x86_64
|
|
|
| P7H55-M Pro
|
INTEL H55
|
System Configuration:
- CPU: Intel Core i3 540 3.07GHz
- GPU: Nvidia 9500GT 1GB DDR2
- RAM: 4GB DDR3 1333MHz
- Fresh install of 10.7.3 (retail download from App Store) with USB method
Component Status:
- All works well except sound (which is muffled with VoodooHDA so I use a Soundblaster USB sound card instead.)
|
Patches
- System Utilities, 3rdParty SATA kext, Lnx2Mac's RealtekRTL81xx Ethernet v0.0.90 kext
|
|
|
| P5G41T-M LX
|
INTEL G41
|
System Configuration:
- CPU: Intel Core 2 Quad 2.33Ghz Q8200
- GPU: Nvidia GeForce 210 1GB
- 6GB 1333Mhz DDR3 RAM
- Apple Cinema Display - 20"
Component Status:
- All works (Apart from Mac App Store but working on it now)
Updated from 10.7.2 and no problems as of yet, downloaded the 10.7.3 update - i didn't use the 'Software Update'. MAKE SURE YOU DELETE "SleepEnabler.kext" BEFORE UPDATING!!
|
Patches
- Chameleon (from VoodooLabs)
- Enable "CPURootUID=1" at startup
VoodooHDA (older version works best (no popping or feedback)).
- ETHERNET does not work out of box. Requires fix. Is reported working, but fix currently unvarified. Does not have ethernet out of box.
|
|
|
| P6X58D-E
|
Intel x58
|
System Configuration:
- CPU: Intel Core i7 950 3,08 GHZ
- GPU: Nvidia GeForce 480 gtx
- 6GB 1870Mhz DDR3 RAM
- SAMSUNG XL2370HD
Component Status:
- All works except sound from Graphic Card and sleep mode
Updated from 10.7.2 and no problems as of yet, downloaded the 10.7.3 update. Using Combo update.
|
Patches
USER DSDT
|
|
|
| P5LD2-X/1333
|
Intel 945 Chipset / LGA775
|
System Configuration:
- CPU: Intel Core 2 Duo E6750 @ 2.66 GHz
- GPU-PCIe: Nvidia GeForce GIGABYTE GTX 260 896MB
- 2x2GB 800Mhz DDR2 RAM
- Seagate Barracuda 500GB 7200RPM SATAII, Hitachi 500GB 7200RPM SATAII, Maxtor 80GB 7200RPM IDE
Component Status:
- Everything works
- Used iAtkos L2, then updated trough apple software update to 10.7.3
|
Patches
- Bootloader: Chameleon 2.1svn r1918
- Graphics Enabler
- Built-in Ethernet
- Extra/Extensions
- FakesMc
- Disabler
- EVO Reboot
- Quad Boot with Windows 7 Ultimate x64, Windows 8 Consumer Preview, Ubuntu 11.10 x64
|
|
|
| P5LD2-Green
|
Intel 945 Chipset / LGA775
|
System Configuration:
- CPU: Intel Core 2 Duo T6300 at 1.83 GHz (overclocked to 2.5 GHz - highest possible synchronized frequency to PCI bus - from BIOS)
- GPU-PCIe: Nvidia GeForce 9500GT
- 4x1GB 667Mhz DDR2 RAM PC-5300 (overclocked to 700 MHz)
- Seagate ST3250824AS SATA2 250GB, Western Digital WDC WD2500YS-01SHB1 SATA-2 250GB, Seagate ST3500418AS SATA2 500GB
Component Status:
- Not working parts: built-in sound Intel HDA (8086:27d8), built-in LAN Marvell Gigabit, Graphic Card not accelerated only after introducing Device Properties in org.chameleon.boot.plist
Updated from 10.7.0 to 10.7.1 then to 10.7.2 and no problems with downloaded 10.7.3 Combo update.
|
Patches
MyHack 4.1+ and over it Chameleon Wizard 3.5.1 and Chameleon-2.1svn-r1814 - working on Kernel x64,
Sound works OOB - VoodooHDA 0.2.1 (release from 03.18.2010), Marvell Yukon2 with fix for PCI-E 88E8053, Graphic Card GeForce 9500GT with CUDA
Dual Boot with Windows 7 Ultimate x86
|
|
|
| P8Z68-V PRO
|
Intel Z68 Chipset
|
System Configuration:
- CPU: Intel Core i7 2600K
- GPU-PCIe: Asus Nvidia GeForce GTX560 Ti
- 4x4GB 1600Mhz DDR3 RAM
- OCZ Agility 3 SSD 120GB (Very good results)
Component Status:
- Everything works
- Used iAtkos L2, then updated trough apple software update to 10.7.3
|
Patches
GTX560 Ti installer 10.7.3 from Osx86.net,
hnak's AppleIntelE1000e Ethernet kext,
Audio ALC892 patch.
|
|
|
| P5KPL-AM EPU
|
P35 + ICH9, BIOS 501
|
Hardware:
- Intel Core2Duo E6420 CPU 2.13 GHz
- XFX GT240 512 mb DDR3 works fully
Notes
- BIOS: Store Configuration ATA/IDE Enhanced;Enhanced Mode Support:S-ATA; IDE Detect Time: 35
- Audio - works with VoodooHDA_261_HP_HDX18 (Output and Inputs) edit Info.plist, replace the key IOPCIClassMatch by IOPCIPrimaryMatch and put the PCI ID of your audio card in string. View: [13]
- Ethernet - Works from pack Atheros AR8121 AR8113AR 8114
- USB - All Work
- IDE - Work
- ICH9R - Works
Install Method:
- 1.BootCD: BOOTCD.ISO
- 2.iAtkos L1 from USB
- 3. Boot with the comand: npci=0x2000
- Bootloader: Chameleon 2.1svn
- MacOsxUpp Combo 10.7.2
- Shutdown/Reboot work 99.9% of the time.
- Mac App Store WORKS!!!
- iCloud WORKS!!!
|
Patches
- Bootloader: Chameleon 2.1svn
- Graphics Enabler
- Built-in Ethernet
- Extra/Extensions
- FakesMc
- Disabler
- EVO Reboot
- Update to 10.7.2 and Update 10.7.3, ALL WORKING!
- Sound+Ethernet: from download files
Useful Tools
|
|
|
| P5N-E SLI
|
nForce 650i SLI
|
- Intel Core 2 Duo E6750
- 4GB RAM
- Nvidia Quadro FX 570
Follow this guide
|
Update form 10.7.0 to 10.7.3 via autoupdate: all working!
|
|
|
| P8P67 ws-Revolution
|
INTEL P67 chipset
|
System Configuration:
- CPU: Intel Core i-7 2600
- GPU: Nvidia GTX560 1GB
- 4GB 1333Mhz DDR3 RAM
- Dlink DWA-556
Component Status:
- All works (including mac app store and iCloud)
Updated from 10.7.2 (iATKOS L2 choosing drivers USB and network intel gigabit) and no problems as of yet, downloaded the 10.7.3 update - i use the 'Software Update'.
|
Patches
- GTX 5xx Enabler 10.7.3
- CUDA driver for mac (www.nvidia.com)
- ALC889
- For USB3 (previously installed on windows USB 3.0 Boost Full Package Version V1.00.05) PXHCD.kext and iousbfamily453.4.2.dmg
- Sleepenabler
|
|
|
| Maximus IV GENE-Z
|
Intel Z68
|
System Configuration:
- CPU: Intel Core i5-2500K
- GPU: XFX AMD Radeon HD 6870 1GB
- 16GB (4x4GB) 1600MHz DDR3 RAM
- Dual Monitors (1xDVI, 1xHDMI)
Notes:
- Most everything appears working properly in 64-bit mode
- Shutdown and reboot work
- Sleep not tested
- USB3 does NOT work: no Asmedia chipset drivers as of this writing (USB2 works perfectly, synced iPhone)
- Dual Monitors both work properly and at 1920x1080
- Mac App Store works
- iCloud works
- NOTE: Kernel panic on boot, with AppleTyMCEDriver.kext. Use Single User mode to rm -rf it.
Install Method:
- Used UpdateHelper to upgrade to 10.6.8
- Created a USB with Mac App Store copy of Lion
- Did a clean reinstall on the HDD, no other devices connected
|
Patches:
- ALC889 kext, with AppleHDA rollback
- EvOreboot
- FakeSMC (with motherboard and Radeon plugins)
- IOUSBFamily.kext Rollback
- NullCPUPowerManagement.kext
- Intel E1000 kext (hnak)
- Chameleon 2.1svn 14xx+ Bootloader
|
|
|
| P5QPL-AM
|
Intel G41
|
System Configuration:
- CPU: Intel Core2Duo 2.93GHz
- GPU: GeForce 8400GS
- 4GB (2x2GB)
Notes:
- Shutdown, sleep and reboot work
-
Install Method:
- Did a clean reinstall on the HDD, no other devices connected
|
Patches:
- Voodoo HDA for audio
- Atheros network **WORKING FINE** using 'atheros AR8121 AR8113AR 8114.zip' from kexts.com
|
|
|
| P8Z68-M Pro
|
Z68
|
System Configuration:
- CPU: Intel Core i5 2400 @ 3.1GHz
- GPU: ATI 6850 1024 MB
- RAM: 2x4GB DDR3 G.SKILL CL9 RipjawsX
- Keyboard: USB
- Mouse: Logitech MX518
Components Status:
- All works,sleep, wakeup, shutdown, restart, USB3.0 not tested
|
Patches
- Kexts for Lan ( Realtek Gigabit Ethernet 2.0.6 for 10.7 ), Sound ( ALC8xx HDA ) and 3rdParty Driver.
- DSDT and SSDT
- Modded Bios for P8Z68-M Pro
|
|
|
| P8P67 M-PRO
|
Intel P67
|
System:
- CPU: Intel Core i5 2310
- GPU: Sapphire AMD Radeon HD 6870 Vapor-X 1024 MB
- RAM: Corsair XMS3 DDR3 1333 MHz 2 x 4 GB
- HDD: WD Caviar Blue 500 GB (Time Machine 150GB/Windows 7 350GB)
- Drive 1: LG BH10LS30 (Blu-Ray)
- Drive 2: SH-D163B (DVD-ROM)
- Audio: Realtek ALC 892 onboard
- Ethernet: Realtek 8111E Gigabit onboard
- Mouse: Cyborg R.A.T.7 works after installation of USBOverdrive
- Wi-Fi: D-Link DWA-556 (recognized as AirPort)
- Bluetooth: Speedlink Vias Nano (Cambridge Silicon Radio chipset)
- Shutdown: Yes
- Restart: Yes
- Sleep: not tested
- iCloud: Yes
- Mac App Store: Yes
|
Installation method:
- Clean installation of Mac OS X Lion 10.7.3.
- Followed this tutorial - link
- System definition: iMac12,2
- EVERYTHING WORKS GREAT!
|
|
|
| Maximus IV Extreme B3
|
Intel (R) P67
|
System Configuration:
- Intel i7-2600K CPU
- Keyboard: Lenovo Thinkpad USB travel keyboard with trackpad and mouse stick & Apple wireless Bluetooth keyboard
- Mouse: Logitech G9 game mouse
- GPU: ATI HD6870
- BIOS Version: 2105
Component Status:
- Network: works without issue, but check hnak's AppleIntelE1000e Ethernet driver, else it will be de-installed
- USB2: works without issue
- USB3: works without issue )
- Bluetooth: works without issue
- SATA 3GB & 6GB (Intel-ports): works without issue
- Audio: works without issue
- Restart/Shutdow: Works without any issue
|
Install Method:
Video
1. Format USB key (min. 8GB) with disk utility (use the option Master Boot Record)
2. Put you OSX Lion image in your OSX app folder (I did this with 10.7.2. and upgraded to 10.7.3 => step 6 / I think you could start with a clean 10.7.3. image as well, but not tested)
3. Run Chimera (download from and install it on the USB key
4. Boot from USB and choose install OSX on your disk (format with disk utility the boot disk as Mac OSX extended journaled with option GUID partition table)
5. Run Chimera with the following items checked:
- system utilities => repair permissions
- audio: - Realtek ACL8xxHDA - AppleHDA Rollback - Non-DSDT HDAEnabler - ALC889
- disk: - 3rdParty SATA - 3rdParty eSATA - Trim Enabler
- Miscellaneous: - FakeSMC - FakeSMC Plugins - Mohterboard plugins - AMD Radeon Plugin - USB 3.0 - NEC/Renesas and Etron
- Network: - hnak's AppleIntelE1000E Ethernet
- Bootloaders: - Chimera v1.7.0 r1394
- iMac 12,2
- OSx86 Software: - Kext Utility - ShowAllfiles
6. Upgraded from 10.7.2. to 10.7.3 without any problem. It's unbelievable, but my mac os has less problems then my windows OS!
|
|
|
| P7P55D-E LX
|
Intel® P55
|
System:
- CPU: Intel Core i3 530
- GPU: ATI HD4670
- RAM: 2 x Kingston DDR3 1333 MHz 4 GB
- HDD: 2 x WD 1TB SATA3 - mirror software RAID
- Audio: VIA VT1708S onboard
- Ethernet: Realtek 8112L Gigabit onboard
- Bluetooth: Cubix
- Shutdown: Yes
- Restart: Yes
- Sleep: No
|
Installation method:
iAtkos L2 (update 10.7.2 to 10.7.3 via "software update")
1920x1080 resolution for Ati card - without any patches.
Patches applied:
(Voodoo, USB3, realtek, jmicron, sata3)
|
|
|
| AT4NM10-I
|
Intel® NM10
|
System:
- CPU:Intel® Atom™ D425
- GPU: GMA3150
- RAM: Kingston DDR2 800 MHz 2GB
- HDD: WD 1TB SATA2
- Audio: IDT73C onboard
- Ethernet: Realtek RTL8112L onboard
- Shutdown: Yes
- Restart: Yes
- Sleep: No
|
Installation method:
iAtkos L2 (update 10.7.2 to 10.7.3 via "software update")
1024x768 resolution without QE/CE
Patches applied:
(Voodoo, realtek)
|
|
|
| P5Q Pro Turbo
|
Intel P45
|
System Configuration:
- CPU: Intel Core 2 Duo E8400 @ 4.01GHz (1.35v)
- GPU: MSI Radeon HD 4890 OC Edition 1GB GDDR5 upgraded to XFX Radeon HD 5850
- 8GB (4x2GB) 1066MHz DDR2 RAM
Notes:
- Used shaumux's DSDT 0602 BIOS
- Everything appears working properly in 64-bit mode
- Shutdown, reboot, and sleep work
- Mac App Store works
- iCloud works
Install Method:
- Used
- Did a clean reinstall on an 80GB HDD
- Run Chimera to install patches and bootloader
|
Patches:
- UserDSDT (DSDT created using Auto DSDT Patcher)
- VoodooHDA 0.2.7.3 for Realtek audio
- QE/CI Exotic 4xxx 10.7.3 patch for 4890
- Ralink Airport utility for Belkin Wireless G USB
- Atheros L1 Ethernet kext for Ethernet
- SleepEnabler for 10.7.3 for Sleep
Update: Upgraded to an XFX Radeon HD 5850 and upgrade was simple as plug and play! Native support in OSX!
Notes:
Wrote a guide at http://hellojustinrtech.blogspot.com/2012/03/installing-mac-osx-lion-on-p5q-pro.html
|
|
|
| ASUS P5Q SE Plus
|
ASUS P5Q SE Plus
|
System:
- Chipset: (Northbridge & Southbridge)Intel® P45 / ICH10 with Intel® Fast Memory Access Technology
- Lan: Realtek Gigabit Lan (detected as RealtekRTL81xx)
- HDD: Seagate Barracuda Green ST1500DL003 1.5TB
- Optical:Optiarc DVD RW AD-7240S
- Shut down: Great!
- Restart: Perfect!
- Sleep: Kills the system and it won't start back up ever again. So I disabled sleep.
|
- Install Method:snow leopard retail. Then made my own USB drive using chimera and the "Install Lion App" from the app store. Then updated from software update to 10.7.3
- BIOS Version: P5Q SE Plus Rev. 2202 hacked to run all os (This was done previously to install Leopard, it allowed SL and Lion both to run as long as I didn't install an AML! Installing the AML with a hacked bios causes the system to break!)
- Audio: VIA VT 1708s I used appleHDA for via vt 1708s. This works technically, but it doesn't detect any sound has been installed. Also the volume slider in the menu bar doesn't work. (except to mute or full volume) Also I have the front mic and speaker ports working. The SPDIF is listed in sound settings, but I don't know if they actually work. "Line in Blue rear" is listed, but doesn't work same with "Line out Black rear"
- LAN: Model, Realtek Gigabit LAN controller featuring AI NET 2: Works OOB.
- SATA & IDE: As Per usual, make sure to set SATA as AHCI otherwise they won't be seen by the OS. The Seagate Barracuda required me to install a boot1h file to the root of the drive in order to make it bootable. It works great now.
- Optical Drive: AD-7240S seems to be working great. Faceplate button doesn't work to eject as disk while in OSX, but can be ejected easily from the GUI.
Does PC-EFI and/or the Vanilla Kernel work on your system? Darwin 11.3.0 (I think this means Vanilla)
Does everything work without patching? Only sound needed patching
|
|
|
| ASUS P5Q
|
Intel P45
|
System:
- Cpu: Intel E8400 Duo 3.0 Ghz
- Ram: Corsair XMS2 DDR2 800Mhz 4x2Gb
- GPU: Sapphire HD4670 512Mb DDR3 2xDVI
- Lan: Realtek Gigabit Lan (detected as RealtekRTL81xx)
- HDD: Seagate Barracuda ST3500320AS 2x500GB
- Optical: Plextor PX-820SA
- Shut down: OK
- Restart: OK
- Sleep: Not works, i disabled it
|
Installation Method:
- Chimera installation, extract original DSDT and patched it with Olarila patch for P5Q.
- My DSDT here
- Settings org.chameleon.boot.plist: Graphic Enabler=yes AtiPorts=2
- Audio: Realtek ALC1200 Working with right AppleHDA.kext but not switch automatically to headphones when plugged. Front panel works!
- LAN: Pci TPlink Realtek Gigabit LAN: Works OOB.
- SATA & IDE: Works perfetcly
- Optical Drive: Plextor PX-820SA works perfectly
|
|
|
| Hardware Name
|
Chipset
|
Notes
|
Patches Used
|
32/64bit working with patches
|
| GA-Z68X-UD3H-B3
|
INTEL Z68
|
System Configuration:
- CPU: Intel Core i7 2600k
- GPU: MSI Nvidia Geforce 560 Ti "Twin Frozr"
- RAM: 4 x 4 GB Mushkin Enhanced Silverline Stiletto DDR3-1333 MHz
- Mushkin Chronos 120 GB SSD
Component Status:
Notes:
- Install method - iATKOS L2 from DVD
- Patched to 10.7.3 with no issue
- Dual booting with Windows 7. First partitioned to two partitions with MBR; one HFS+ one FAT32; installed Windows 7 on FAT32 (format to NTFS); then installed Mac OS X with iATKOS disk.
- Remember set HPET to 64 bit enabled
- Remember set SATA devices to AHCI for both Marvell controller and Intel controller (main boot drive connected to Intel SATA3).
- Sleep untested but I don't really care about sleep anyway. Boots in 5 seconds.
|
Patches
- Chameleon 2.1
- Relevant audio patches for Realtek ALC 889 on iATKOS work out of box.
- Installed with GF100 kext and graphics enabler in iATKOS; afterwards upgraded to official NVIDIA drivers. Works like a charm with two monitors 2560x1440 and 1080x1920.
- Relevant network patches for Realtek RTL8111E chip work but had to use reviving dead ethernet port.
|
|
|
| GA-965-DQ6
|
INTEL 775
|
System Configuration:
- CPU: Intel Core Quad Q6600 2.4MHz
- GPU: Gigabyte Geforce GT240 1GB
- RAM: Kingstone HyperX 4x1GB 1600Mhz
Component Status:
Notes:
- Install method- iAtkos L2 installed from thumb drive
- Update to 10.7.3 by using Software Update
|
Patches
|
|
|
| GA-Z68X-UD3H-B3
|
INTEL Z68
|
System Configuration:
- CPU: Intel Core i5 - 2500K
- GPU: Intel HD3000 (DVI only)
- RAM: Kingstone HyperX 2x4GB 1600Mhz
Component Status:
Notes:
- Install method - Lion.dmg installed from thumb drive
- Update to 10.7.3 by using Software Update
|
Patches
- Chameleon-2.1svn-r1923 (from ErmaC)
- [14] Gigabyte Z68X-UD3H-B3 pack / all-in-one post-installation pack designed specifically for this motherboard and Lion 10.7. Fully patched DSDT included + several useful applications...
|
|
|
| GA-G31M-ES2L rev2.4
|
G31
|
System Configuration:
- CPU: Intel Pentium Dual-Core 3.2GHz
- GPU: GeForce 9600 GT
- RAM: 4GB DDR2 800MHz
Functionality:
- Everything works, Ethernet and all that...
- Upgraded from 10.7.2 to 10.7.3 and works fine!!
- From Retail Install... No iAtkos...
|
Patches
- Chameleon 2.1svn (from VoodooLabs) + npci=0x2000 (Solves PCI Configuration Begin)
- AzaliaAudio.pkg for Sound
- DSDT
|
|
|
| GA-Z68XP-UD3
|
INTEL Z68
|
System Configuration:
- Case: Thermaltake Element V Black Edition
- CPU: Intel Core i7 - 2600K
- GPU: GeForce GTX 460
- Dual Monitors using VGA and DVI from Single Video Card
Component Status:
"Notes:"
Install method - Lion.dmg restored and installed from 8GB thumb drive
Bootloader: Chameleon 2.1 r1666
Update to 10.7.3 by using Software Update
|
Patches
- Chameleon 2.1svn (from VoodooLabs) + arch=x86_64
VoodooHDA. Edit .plist for Voodoo to reduce gain at boot. This patch was done at initial 10.7.1 install.
|
|
|
| GA-H61M-S2-B3 F1
|
H61
|
System Configuration:
- CPU: Intel Celeron G530 2.4 GHz Dual core
- GPU: Point of View GeForce GT 520 1024 MB.
- 2 GB RAM.
- DVI Monitor.
Component Status:
- All working fine, QE/CI and OpenGL working fine. CPU is incorrectly detected as a Core i7.
- Retail Lion from App Store using method to create a USB drive.
|
Patches
- Chameleon from VoodooLabs
- VoodooHDA. Audio volume control not working.
|
|
|
| GA-H67MA-USB3-B3 F4
|
H67
|
System Configuration:
- CPU: Intel i5 2320 3.0 GHz Quad Core
- GPU: Integrated Video (Intel HD 2000)
- 16 GB RAM
- DVI Monitor
- Install Method: iAtkos L1, Updated kexts, Combo Update to 10.7.3 w/ Sandy Bridge method.
Component Status:
- All components tested except PS/2. All components work except Audio through HDMI and dual screen. Monitor type not recognized so Resolution 1024 x 768 is standard.
|
Patches
- Multibest with Tony Mac's CustomDSDT
- Audio enabled by checking Apple8XXHDA, AppleHDA rollback and ALC889 in Multibeast
- Ethernet enabled by checking Realtek Gigabit Ethernet in Multibeast
- USB3.0 working
- Updated kexts for integrated video (must boot with /f command until this is done)
|
|
|
| GA-EP35-DS3L
|
INTEL P35
|
System Configuration:
- CPU: Intel Core 2 Duo E 7500
- GPU: GeForce 7300GS
- Dual Monitors using VGA and DVI from Single Video Card
- TL-WN781N
Component Status:
After using Mac App Store 10.7.0, I updated to 10.7.1 ComboUpdate through software update, updated to 10.7.2 and then 10.7.3.
|
Patches
- Chameleon Wizard + arch=x86_64
AppleHDA . Graphics Enabler, Modified AR7285 kext.
|
|
|
| GA-Z68A-D3H-B3 F10
|
INTEL Z68
|
System Configuration:
- CPU: Intel Core i3 2015
- GPU: Radeon HD 68500
- Dual Monitors from top HDMI and DVI
- 12GB RAM
Functionality:
- Didn't Have any issues, used combo package from 10.7.2 to .3 and used Kext Wizard before to get everything up and running.
|
Patches
- Chameleon 2.1svn from VoodooLabs and custom DSDT
|
|
|
| GA-H61M-D2P-B3
|
INTEL H61
|
System Configuration:
- CPU: 3.09 GHz Intel Core i3
- GPU: ATi 5450 Full Graphics 1920x1080
- Custom DSDT file from DSDT Database choose according your bios
- 8 GB DDR3 RAM
Component Status:
All Working Including Sleep
- Audio Latest Multibeast,Drivers/kexts And bootloaders/audio/Realtek/patchedAppleHDA/ALC889.
- Also Install ALCxxHDA kext.
- Ethernet by RealtekRTL81xx
- Sleep fully working use AppleRCT.kext
- FakeSMC REV 530 in extra folder
|
Patches
- Smbios Choose Imac 12.1 and generate a random serial number.
- Org.Chameleon.Boot using Chameleon Wizard=Darkwake,Ethernet Built in,Restart fix,
GUI,Generate P- and C- states,System type Desktop.
- Do not check Use Kernel cache in wont boot if u do, also i am using 64bit by default..
- Shutdown,Restart Working OOB No kext needed
|
|
|
| GA-H61M-S2P-B3 Rev.1.1
|
Intel® H61 Chipset
|
System Configuration
- CPU : Intel Core i3 2100
- GPU : ATI Radeon HD 5450
- RAM : 8 GB DDR3
Component Status
- All Works after apply patch
- App Store works
Install Method :
- Fresh install from 10.6.3 Retail
- update to 10.6.8
- Apply custom DSDT + VoodooHDA 0.2.72 + Ati5000injector.kext & reboot
- Install Atheros L1cEthernet reboot
- Make app store work : delete all connection in system preference & delete Networkinterfaces.plist, reboot. add new connection in system preference (ETHERNET MUST ADD FIRST !),
- Install Lion 10.7
- Update to 10.7.3 with Update 10.7.3 client combo
use rboot if got kernel panic then fix permission & cache
|
Patches
|
|
|
| GA-Z68MX-UD2H-B3 BIOS F12
|
Intel® Z68 Chipset
|
System Configuration
- CPU : Intel Core i7 2600 (LGA1155)
- GPU : EVGA GTS 450 FPB
- RAM : 16 GB Corsair Vengeance DDR3
Component Status
- All Works with custom DSDT
- App Store works with quick fix
Install Method :
Full install method found at WhatTheTech (Hackintosh 2.0)
|
Patches
- Custom DSDT
- Lnx2Mac LAN Driver
- Graphics Enabler = Yes
|
|
|
| GA-P55-UD-3R
|
INTEL LGA1156
|
System Configuration:
- CPU: 3.0 GHz Intel Core i5-750 (OC'ed from 2.67GHz stock freq)
- GPU: PCIE - Zotac GeForce GT 430 1024 MB (Only primary DVI tested)
- 8 GB DDR3-1600 RAM (4x2GB)
Component Status:
- All appears to work except audio (including sleep)
Installed from 10.7.3 + USB method drive.
I just installed 10.7.3 from USB drive and everything works OOB.
|
Patches
|
|
|
| GA-Z68MX-UD2H-B3
|
INTEL Z68
|
System Configuration:
- Case: Thermaltake V3
- CPU: Intel Core i7 - 2600K (all intel processor works)
- GPU: GeForce GTX 240 1 GB
- 12Gb of ram (2 its ok)
- Dual Monitors using VGA and DVI from Single Video Card
Component Status:
"Notes:"
Download Iatkos Lion 10.7.1 , boot the dvd whit this kernel flag npci=0x2000 -v
Install itakos and install the kext of the dvd
Boot mac whit the kernel flag npci=0x2000
Update to 10.7.3
Enjoy!!
|
|
|
| EP45-UD3LR
|
G41/ICH10
|
Had to download and add Sleepenabler kext to E/E folder to get sleep working.
Components:
- Intel Core2Duo 2,13 GHz
- Corsair 6GB DDR2 800MHz
- Asus Geforce EN 210 512 Silent GPU
Component Status:
- All works. Including HDMI out (haven't tested multiple displays), Ethernet, Audio and Sleep.
|
All included in Package:
- DSDT
- fakesmc.kext
- JMicronATA.kext
- alc888b.kext
+ Had to add sleepenabler after installation which is not included in the package to get sleep working.
|
|
|
| Hardware Name
|
Chipset
|
Notes
|
Patches Used
|
32/64bit working with patches
|
| DG35EC
|
Intel G35
|
System Configuration:
- CPU: Intel Pentium E5200 2.5GHz
- GPU: GeForce 9500 GT 1GB DDR2
- RAM: 4GB DDR2 800MHz
- Fresh install of 10.7.3 (retail download from App Store) with USB method
- Wifi works with this adapter Belkin USB Adapter F5D8053 v.6 (See Wireless section below for installation method)
Functionality:
- Everything works perfectly except shutdown (the OS shuts down, but the computer stays running)
|
Patches
- VoodooHDA 0.2.1 kext, 3rdParty SATA kext, hnak's AppleIntelE1000e Ethernet kext
|
|
|
| DH55HC
|
Intel H55
|
System Configuration:
- CPU: Intel core i3 540 3.07GHz
- GPU: GeForce 8400 GS 512MB DDR3
- RAM: 4GB DDR3 1333MHz
- Fresh install of 10.7.3 (retail download from App Store) with USB method
Functionality:
- Everything works perfectly except shutdown (the OS shuts down, but the computer stays running)
|
Patches
- 3rdParty SATA kext, hnak's AppleIntelE1000e Ethernet kext
- Sound works okay (not great) with VoodooHDA 0.2.1 (so I use a Soundblaster USB sound card instead - see Sound Cards section below.)
|
|
|
| DP35DP
|
Intel P35
|
System Configuration:
- CPU: Intel Q8400 Quad-core
- GPU: GeForce 7600 GS 256MB
- Wireless Card: D-Link DWA-556
- RAM: 6GB DDR2
- Upgrade from SnowLeopard 10.6.8 (retail purchase and download of Lion from App Store) on USB stick
Boot Flags:
Kexts:
Functionality:
- Everything works perfectly right after install except sound; install VoodooHDA 0.2.61 and sound will work. Printer setup sees my Canon network printer; I connect to it and it works. Dual monitors work perfectly. All 6GB of memory is recognized; under Snow Leopard, only 4GB was recognized. It is easier (and faster) to install OSX on this configuration than it is to install Windows 7 or Fedora Linux.
- Before you install Voodoo, make sure you remove AppleHDA.kext. Both sound drivers cannot coexist; if you forget this step, you will get kernel panics at boot time.
|
Patches
- Sound works with VoodooHDA 0.2.61
|
|
|
| DX58SO
|
Intel X58
|
System Configuration:
- CPU: Intel core i7 950 3.07GHz (Stock)
- GPU: Radeon Sapphire 5770 Vapour-x 1GB DDR5 (Works with GE = YES or NO)
- RAM: 6GB DDR3 1333MHz
- Wifi- DLink DWA 125 (Ralink Driver)
- Retail Install
- BootLoader : Chamaleon 2.1 RC5
- SMBIOS: MacPro 4.1
Boot Flags:
- GraphicsEnable=Yes
- GeneratePStates=Yes
- GenerateCStates=Yes
- KernelCache=Yes
Kexts:
S/L/E
- FakeSMC
- AppleHDA(patched)
- Legacy889HDA
- AppleIntel8256X
Functionality:
- Everything works flawless. Video, Audio, Lan , Firewire, Wifi
- Power Management works with no Kext.
- Shutdown and Sleep works with no Kext.
- Geekbench: 11.000 aprox.
- Cinebench: 6 aprox.
- GPU 37 Fps
VIDEO DEMO
|
Patches
Patches: DTGP, IRQS, SBUS, SHUTDOWN, LPC ICH10, REMOVED DEVICES, MUTE, AHCI ORANGE ICON, AZAL TO HDEF, HDEF, ALC889
|
|
|
| D975XBX2
|
Intel 975x
|
System Configuration:
- CPU: Intel Core 2 Q6600
- GPU: ATI Radeon 4850 1GB
- RAM: 6GB DDR2 800MHz
- Fresh install of 10.7.3 (retail download from App Store) with USB method
Functionality:
- Everything works perfectly, sans sleep. Not sure about sound, as I use a USB sound card. Booting in 64-bit mode.
|
Patches
- First boot (install and post-install) with GraphicsEnabler=No, subsequent boots work without problem.
|
|
|
| Intel Extreme Series DX48BT2
|
Intel ICH9R
|
System Configuration:
- CPU: Intel Quad Core 9770X
- GPU:2 x ATI Radeon 6450 1GB(Yes i have 4 screens working)
- RAM: 8GB DDR3 1033MHz
- Fresh install of 10.7.3 (retail download from App Store) with USB method
Functionality:
- Everything works perfectly, sans sleep. Not sure about sound, as I use a FW 1394 sound card. Booting in 64-bit mode.
|
Patches
- First boot (install and post-install) with GraphicsEnabler=No, subsequent boots work without problem.
Works ok in 10.6.8 as well with 4 screens.
|
|
|
| Hardware Name
|
Chipset
|
Notes
|
Patches Used
|
32/64bit working with patches
|
| H55M-E33
|
Intel H55
|
System Configuration:
- Intel Core i5-750
- ASUS GeForce EN210 Silent 512MB
- Broadcom USB Bluetooth Adapter (0x016a, 0x050d) to connect my Magic Trackpad
Component Status:
- Audio works with patches including front panel and "headphone mute"
- QE/CI and Dual Monitor works OOB with GraphicsEnabler
- Sleep works with fixes
- Ethernet works with patches
|
Patches:
- Audio: ALC8xxHDA + AppleHDA Rollback + ALC889 HDAEnabler
- Disk: 3rdParty SATA + eSATA + JMicron36x (not sure if needed)
- Misc: ElliotForceLegacyRTC + FakeSMC
- Networking: Realtek Gigabit Networking 2.0.6
- Bootloader: Chameleon 2.1svn 1475+
- Kernelflags: npci=0x2000 GraphicsEnabler=yes (for full QE/CI with Asus GeForce EN210 Silent)
- Misc: "AppleRTC Patch for CMOS Reset" to fix sleep
Manual:
- To fix reboot after wake make sure you tick the two boxes in energy preferences: automatic restart on power failure and automatic restart on freeze(!)
- Make sure BIOS suspend mode is S3
- Also had to disable wake by USB, otherwise Magic Trackpad (or the bluetooth adapter) wakes the system after going to sleep (is there a fix?)
|
|
|
| G41M-P23
|
Intel G41/ICH7
|
Hardware:
- Processor: Intel Core 2 Duo E8200 OC'ed @2.7GHz (2.66 stock)
- RAM: 1x Corsair Vengeance 4GB DDR3 1600MHz (Running at 1333)
- Graphics: XFX GeForce 9800 GTX XXX-Edition works with GraphicsEnabler=Yes, 1080p, translucent menu bar, YouTube, and QuickTime.
Misc. Info:
- Updated to 10.7.3 using combo update, not through Software Update (don't know if this is necessary)
- Copied /Extra folder from UniBeast flash drive to root directory (this copies PCIRootUID=1 in Boot.plist, be sure to remove)
- Hardware Monitor works great with temperature sensors!
|
What works/How:
- Install Method: UniBeast w/App Store Lion
- Audio: Realtek ALC889 VoodooHDA (to get rid of noise, turn Input Gain to 0)
- LAN: Realtek 8111DL: Used RealtekR1000SL.kext
- SATA & IDE: Haven't tested IDE, but SATA works 100%.
- Optical Drive: Lite-On iHAS324 SATA works 100%.
- Shutdown, Reboot work but haven't tested sleep.
- npci=0x2000 GraphicsEnabler=Yes
- NOTE: Make sure to remove PCIRootUID=1 in org.chameleon.Boot.plist if it is there!
|
|
|
| B75MA-P45
|
Intel B75
|
System Configuration:
- CPU: Intel Celeron G530
- RAM: 4GB A-DATA Value DDR3 U-DIMM 1333 (Kit)
- Graphics: Intel HD 2000 onboard
- Ethernet: RTL8111E onboard
- Audio: ALC887 onboard
Component Status:
- Ethernet works OOB with Lnx2Mac driver
- Audio works
- DVI works OOB with full resolution but w/o QE/CI
- USB 3.0 works as USB 2.0
- Sleep works
- Power Management works
|
Patches:
- DSDT: Created custom DSDT
- Audio: Voodoo 2.7.2
- Misc: ElliotForceLegacyRTC + FakeSMC + AppleRTC (not sure if needed)
- Networking: Lnx2Mac
- USB: IOUSBFamily Rollback
- USB 3.0: PXHCD driver (NEC/Renseas and Etron)
- Bootloader: Chimera v1.9.1
- Power Management: flAKed SpeedStepper
- Kernelflags: GraphicsEnabler=No
- System Definition: MacPro 3,1
|
|
|
| H55-G43
|
Intel H55
|
System Configuration:
- Intel Core i5-650 3.20GHz
- XFX HD5670 1GB DDR5
- RAM: Kingston 4DIMM 2GB DDR3 1333MHz
- PCIe Wifi DWA 556
Component Status:
- Installation method: Clean installation of Mac OS X Lion 10.7.3 downloaded from Mac App Store
- All Works with custom DSDT
- App Store works with quick fix
|
Patches:
- Audio: ALC8xxHDA + AppleHDA Rollback + ALC889 HDAEnabler
- Disk: 3rdParty SATA + JMicron36x
- Misc: FakeSMC
- Networking Lan: Realtek 8111DL: Used RealtekR1000.kext
- Bootloader: Chimera v1.9.1
- Kernelflags: npci=0x2000 GraphicsEnabler=Yes
|
|
|
| Z68A-G43 (G3)
|
Intel Z68
|
System Configuration:
- CPU: Intel Core i5-2500K 3.3GHz
- GPU: XFX HD6870 1GB DDR5 Double-D
- RAM: Corsair Vengeance LP 4GB DDR3 1600MHz x2 (kit)
- Ethernet: Realtek 8111E onboard
- Audio: Realtek ALC887 onboard
Component Status:
- All components almost completely working.
- Sleep doesn't work - screen goes black, fans stay running. Hard reboot required.
- Muting the audio doesn't work, however changing the volume works fine.
- Only audio and ethernet not working out-of-the-box.
- No pre-built DSDT available for motherboard
- App Store works
Installation Procedure:
- Installed Lion 10.7.2 using iAtkos L2
- Installed patches using MultiBeast 4.4.0
- Apple System Update to 10.7.4
|
Patches selected on iAtkos install (excluding defaults):
- Disk: AHCI SATA + SSD Trim Support
- Audio: AppleHDA ALC8xx + ALC887/ALC888b HDAEnabler
- USB 3.0
Patches selected in MultiBeast:
- Audio: ALC8xxHDA + AppleHDA Rollback + Non-DSDT ALC887/888b
- LAN: Lnx2Mac RealtekRTL81x Ethernet
|
?
|
|
| MSI 945 Neo5-F (MS-7236)
|
Intel 945GC
|
System Configuration:
- Intel Pentium Dual-Core E5200 2.5GHz
- Zotac 8800GT AMP! Edition 512Mb DDR3
- Hynix/Silicon Power 4х1GB DDR2 800MHz
- USB keyboard/mouse/webcam/bluetooth dongle
Component Status:
- Installation method: 10.7.3 clean install
- All works OOB with custom DSDT + patched AppleHDA.kext
|
Patches:
- Audio: patched AppleHDA.kext (here)
- Bootloader: Chimera v1.9.2
- Kernelflags: npci=0x2000 GraphicsEnabler=Yes
- Misc: FakeSMC
|
|
|
Please specify if your card is AGP, Integrated, PCI or PCI-E.
Also, place chip and board manufacturer in their respective column.
| Model
|
Board-Manufacturer
|
Notes
|
QE
|
Output
|
Dual display
|
32/64bit working with patch
|
| HD5450 512MB DDR2
|
Sapphire
|
GraphicsEnabler=Yes, install ATI5000Injector.kext with Kext Utility, repair permissions, reboot.
|
|
Tested Vga / Hdmi
|
?
|
|
|
| EAH5450 (HD5450) 512MB DDR2
|
Asus
|
GraphicsEnabler=Yes, install ATI5000Injector.kext with Kext Utility
|
|
Tested VGA / HDMI /DVI
|
|
|
|
| HD 4870x2 2GB
|
Gigabyte
|
First time GraphicsEnabler=No,Download QE_CI Exotic patch Lion_10.7.3_(11D50) add 0x94411002 in ATIRadeonX2000.kext and ATI4800Controller.kext
Install it with Kext Utility,repair permissions and reboot with GraphicsEnabler=Yes.
|
|
Tested only one DVI out
|
?
|
|
|
| Radeon HD 4890 OC Edition 1GB GDDR5
|
MSI
|
GraphicsEnabler=Yes, install QE/CI Exotic 4xxx Patch for Lion 10.7.3
|
|
Tested VGA / HDMI /DVI
|
|
|
|
| HD 4670 1GB GDDR3
|
Sapphire
|
GraphicsEnabler=Yes. On iAtkos L2 default Chameleon 2.1 ,deselecting "space" for Qe.
|
?
|
Tested only one DVI/vga adapter out
|
?
|
|
|
| Ultimate HD 4670 512MB GDDR3
|
Sapphire
|
GraphicsEnabler=Yes. On iAtkos L2 default.
|
?
|
VGA. DVI,HDMI not working.
|
No
|
|
|
| HD 5670 1GB DDR5
|
Sapphire
|
Works OOB with GraphicsEnabler=Yes. Fully working at 64 bits.
|
|
HDMI and DVI
|
|
?
|
|
| HD 5770 1GB DDR5
|
PowerColor
|
Works OOB with GraphicsEnabler=Yes. Fully working at 64 bits. No creshes, no freezing... 100%
|
?
|
HDMI and DVI
|
?
|
?
|
|
| Radeon HD 5770
|
Gigabyte
|
Works OOB with GraphicsEnabler=Yes
|
|
2x DVI/HDMI
|
|
|
|
| HD 5770 1GB
|
Club 3D
|
Works OOB with GraphicsEnabler=Yes, AtiConfig=Vervet
|
|
DVI / HDMI / VGA
|
|
|
|
| Radeon HD 5850 1GB GDDR5
|
XFX
|
Native support in OSX
|
|
Tested VGA / HDMI /DVI
|
|
|
|
| HD 6450 2GB DDR3
|
XFX
|
worked with no problems.
|
|
|
|
|
|
| HD 6850 1GB GDDR5
|
Sappire
|
worked with no problems.
|
|
|
|
|
|
| HD 6850 1GB GDDR5
|
Gigabyte
|
First time it worked with no problems when it was one monitor on the HDMI port, then when I added one to the top DVI port it wouldn't boot so I had to add ATIconfig=6850.
|
|
Top HDMI and DVI work
|
|
|
| HD 6870 1GB GDDR5
|
XFX
|
Nothing special. Works OOB.
|
|
Top DVI works, bottom DVI does NOT. HDMI works, Mini-DisplayPort not tested.
|
|
|
|
| HD 6870 1GB GDDR5
|
XFX
|
Works OOB. (If there isn't, for the native boot screen resolution you need to patch your VBIOS like in this GUIDE)
|
|
Top DVI works. HDMI works, Both Mini-DisplayPort works.
|
|
|
|
| HD 6670 1GB GDDR5
|
Powercolor
|
Works OOB.
|
|
DVI, VGA & HDMI works.
|
|
|
|
| HD 6670 1GB GDDR5
|
Sapphire
|
Works OOB with GraphicsEnabler=No
|
|
DVI works. DisplayPort not tested.
|
|
|
|
| HD 6870 Vapor-X 1GB GDDR5
|
Sapphire
|
Works OOB.
|
|
DVI & HDMI works, miniDP not tested
|
|
|
|
| HD 6870 2GB (Single Fan)
|
XFX
|
Works OOB. No DVD Player. Duckweed with Graphics Enabler off allows multiscreen.
|
|
2xDVI +Active Mini DisplayPort to DVI adapter
|
|
?
|
|
| Model
|
Board-Manufacturer
|
Notes
|
QE
|
Output
|
Dual display
|
32/64bit working with patch
|
| GeForce GTX 295 1800 MB (Dual PCB)
|
Nvidia (dual pcb)
|
Specs
- PCI Root
- (0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/Pci(0x2,0x0)/Pci(0x0,0x0)
- (0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0)
- Bios Rom version
- 62.00.4E.00.03
- 62.00.4E.00.02
Installation
- Lion Retail Method and Clean install
- no tweaking on other kexts since your ID is already on the OS
- After upgrading to Lion only HDMI works
(check the Alienware section above and see the process of this card)
- install the latest CUDA drivers of Nvidia CUDA
- install the latest Nvidia drivers Driver for GTX 2xx series
- Delete your EFI string from org.Chameleon.boot.plist located in /Extra/ -(no longer need it)
- "GraphicsEnabler=Yes" is a must now in your org.Chameleon.Boot.Plist
- JUST in case that didn't work.
- install this using kextBeast (delete orignals first from /S/L/E/)
- ---->Nvidia GTX all from osx86.net
- Repair permissions with MultiBeast or Kexthelper etc...
- Flags I used for this card IN EXTREME cases
- "PCIRootUID=1" "npci=0x3000"
By Q8!
|
|
DVIs and HDMI
|
|
|
|
| GeForce GTX 260 896MB
|
GIGABYTE
|
Works OOB with: GraphicsEnabler=Yes
|
|
DVI/DVI
|
Not Tested
|
|
|
| Geforce Gtx 550 Ti 1gb
|
Nvidia
|
Works with iAtkos L2 10.7.2, then updated through software update to 10.7.3, during installation of iAtkos I selected nvidia enabler
|
|
DVI/DVI
|
|
|
|
| Gigabyte
|
|
works only in 32-bit mode with GraphicsEnabler=Yes
|
|
DVI/VGA
|
|
|
|
| 7300 GS 256MB
|
Nvidia
|
Works with retail 10.7.0 updated through software update to 10.7.3 selected nvidia enabler in install, Card Memoory reported as 64MB
|
|
DVI/VGA
|
|
|
|
| 7300 GS 256MB
|
PNY
|
Worked perfectly in 10.7.0-3 with graphics enabler, only tested in 32 bit
|
|
VGA only
|
|
|
|
| 7600 GS 256MB
|
Nvidia
|
Worked perfectly in 10.7.0-10.7.5 OOB. Dual monitors work OOB; it just starts up and works.
|
|
One VGA and one DVI; works perfectly!
|
|
|
|
| Zotac
|
|
GraphicsEnabler=Yes
install NVEnabler64.kext,
then in Terminal edit /System/Library/Extensions/NVDANV50Hal.kext/Contents/Info.plist
adding this string 0x10c310de&0xfff0ffff
to the <key>IOPCIPrimaryMatch</key> section
|
|
tested HDMI only
|
?
|
|
|
| 8800 GTS 320MB
|
NVIDIA
|
Works best with GraphicsEnabler=Yes - Tested with OSX 10.7.2 and 10.7.3
May cause problems with Adobe Flash-Player under Safari and Firefox.
|
|
2xDVI
|
|
|
|
| Zotac 8800GT AMP! Edition 512 Mb DDR3
|
Zotac
|
works OOB with latest Chameleon bootloader (set GraphicsEnabler=Yes)
|
|
DVI
|
Not Tested
|
|
|
| Nvidia 8800GTX 768mb DDR3
|
Hercules
|
boots oob with Chameleon. Removal of 7xxx series kexts required to prevent finder crash. Rollback to DP4 nvidia kexts required to use flash/silverlight in safari
|
|
DVI x2 , VGA adapter to DVI , DVI to HDMI works, no HDCP
|
|
|
|
| GT220 1GB
|
Zogis
|
works OOB on Intel DP35DP Mobo, using Unibeast + Multibeast
|
|
VGA/DVI/ (HDMI not tested yet)
|
|
|
|
| 9500 GT 1GB DDR2
|
Zotac
|
works OOB with GraphicsEnabler=Yes
|
|
tested DVI only
|
?
|
|
|
| 9800 GTX 512MB DDR3
|
XFX
|
Works fine with GraphicsEnabler=Yes, npci=0x2000. 1920x1080, translucent menu bar, YouTube, and QuickTime.
|
|
DVI/DVI
|
|
|
|
| EN210 SILENT/DI/512MD2(LP)
|
ASUS
|
Works OOB with: GraphicsEnabler=Yes
|
|
VGA/DVI/HDMI
|
|
|
|
| Geforce GT240 1G gddr3
|
NVIDIA
|
works perfectly with graphics enabler 10.7.0-3. only tested in 32bit
|
|
VGA/DVI/ (HDMI not tested yet)
|
|
|
|
| Interface
|
Standard
|
Device
|
Manufacturer
|
Chipset
|
Notes
|
32/64bit working with patch
|
| PCI
|
a/b/g/n
|
NetGear RangeMax WN311B
|
Broadcom
|
BCM4321
|
Create Extensions folder in Extra folder, Include Broadcom43XXFamily.kext, BroadcomFix.kext & IONetworking.kext then Add Kexts = AppleAirportBrcm4311.kext, Broadcom43XXFamilyrev2.kext & Broadcom43225.kext. Delete IO80211Family.kext file from S/L/E Folder, Verify permissions, -v
|
|
|
| PCIe
|
a/b/g/n
|
Dell 1505 /15/25
|
Broadcom
|
BCM4328
|
Working OOB
|
|
|
| USB
|
G/N
|
DWA-121
|
D-Link
|
Realtek RLT8188CUS
|
Download RLT8188CUS driver from here Works perfectly - great small usb adaptor for a laptop
|
Yes
|
Yes
|
| USB
|
G/N
|
HWNUp-150
|
Hercules
|
Realtek RLT8192CU
|
Download RLT8192CU driver from here Works perfectly - great small usb adaptor for a laptop
|
Yes
|
Yes
|
| USB
|
b/g/n 300
|
WL-160N
|
ASUS
|
Ralink RT2870
|
Hardware ID: USB\VID_0B05&PID_1731, USB\VID_0B05&PID_1732
- Working OOB (with driver from Ralink) on ASUS P7H55-M Pro, Intel core i3 540 cpu, Zotac 9500GT 1GB, fresh install of Lion 10.7.3.
- Install Mac OS X 10.7 drivers from here. (10/21/2011-V4.1.8.0)
- Plug in your WL-160N. After a few seconds, the lights should flash, and the Ralink Wireless Utilities window should pop up ready for you to configure.
If your adapter isn't recognized, try this:
- Edit Info.plist with Terminal: sudo nano /System/Library/Extensions/RT2870USBWirelessDriver.kext/Contents/Info.plist
- Change Device ID in the first Asus section to 1731
- Change Device ID in the second Asus section to 1732
|
|
|
| USB
|
b/g/n 300
|
F5D8053 v.6
|
Belkin
|
Realtek RTL8188SU
|
Hardware ID: USB\VID_050D&PID_815F
- Tested Working on Intel DG35EC, Pentium E5200 cpu, Zotac 9500GT 1GB, fresh install of Lion 10.7.3.
- Install Mac OS X 10.7 drivers from here.
- Edit Info.plist with terminal: sudo nano /System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AirPortAtheros21.kext/Contents/Info.plist/
- add: <string>pci168c,29</string> to the <key>IONameMatch</key> section.
|
|
|
| USB
|
b/g/n 300
|
WUSB600N v.2
|
Linksys
|
Ralink RT2870
|
Hardware ID: USB\VID_1737&PID_0079
- Tested Working on ASUS P7H55-M Pro, Intel core i3 540 cpu, Zotac 9500GT 1GB, fresh install of Lion 10.7.3.
- Install Mac OS X 10.7 drivers from here. (10/21/2011-V4.1.8.0)
- Edit Info.plist with Terminal: sudo nano /System/Library/Extensions/RT2870USBWirelessDriver.kext/Contents/Info.plist
- Leave the Device ID in the first Linksys section as 112
- Change Device ID in the second Linksys section to 121
|
|
|
| PCIe
|
b/g/n 300
|
DWA-556
|
D-link
|
Broadcom
|
Works OOB as native Airport Extreme card.
|
|
|
| USB
|
b/g/n 300
|
DWA-140
|
D-link
|
Ralink RL2870
|
Works With latest 10.7 drivers from www.ralinktech.com
|
|
|
| PCIE
|
b/g/n150
|
TL-WN781N (Lite)
|
TP-Link
|
Atheros 9285
|
TESTED WORKING on i5, Lion 10.7.3, appears as "AirPort Extreme (0x168C, 0x30A1)".
- Download this KEXT
- Kext wizard to install
- Kext Wizard or Kext Utility to repair permissions
- After install, may have to create "WiFi" location in System Prefrences > Network.
|
|
|
| PCIE
|
B/G/N 300Mpbs
|
TL-WN851ND
|
TP-Link
|
Atheros 9227
|
TESTED WORKING on Sandy Bridge (i5), Lion 10.7.3, appears as "AirPort Extreme".
- Download this KEXT from OSX86. Add DeviceName PCI186C,2d to AtherosAirPort40.kext plist.info
- Utilize Kext Utility to add kext.
- Kext Utility to repair permissions. Clean reboot, with "-f -v" flags set.
|
|
|
| Type of Accessory
|
Item Description
|
Manufacturer
|
Notes
|
32/64bit working with patch
|
| Bluetooth Dongle
|
Belkin F8T016ng
|
Belkin
|
Works OOB
|
|
|
| Bluetooth Dongle
|
Asus USB-BT21
|
Asus
|
Works OOB (Working with magic mouse, trackpad, and Apple keyboard all connected at the same time. Doesn't work in ML 3 Build 12A193i )
|
|
|
| Bluetooth Dongle
|
Cambridge Silicon Radio
|
Cambridge Silicon Radio
|
Works OOB
|
|
|
| Bluetooth Dongle
|
E-Pro USB Bluetooth
|
Boardcom
|
Works OOB (test wit magic trackpad)
|
|
|
| Bluetooth Dongle
|
Rocketfish Bluetooth
|
Rocketfish
|
Works OOB (tested with magic mouse and keyboard)
|
|
|
| TV Tuner
|
PCTV USB Pinnacle HD Pro Stick 330e
|
Pinnacle
|
Installed EyeTV Only tried analog TV
|
|
|
| Video conversion card
|
ADVC110
|
Grass Valley Canopus
|
tested on different VIA FireWire cards. Not working, unrecognized.
|
|
|
| Firewire PCI-E
|
VIA VT6315N 3+1xFW400
|
Logilink
|
Works OOB Lion 10.7.3 (tested with AJA IO)
|
|
|
| Video conversion BOX
|
IO BOX
|
AJA
|
Works OOB Lion 10.7.3 and FCP7
|
|
|
| Video capture PCI card with FireWire port
|
Studio AV/DV
|
Pinnacle
|
Not working. The FireWire port is recognized, but you can't capture video stream (at meantime, FireWire scanner is working). IC type "mb87j3560" or "51011810".
|
|
|
| Firewire PCI card
|
VIA VT6307
|
Mobiledata
|
Works OOB. Lion 10.7.3
|
|
|
| Firewire PCI-E card
|
VIA VT6315N
|
Espada
|
Works, but some malfunctioning detected in video capture mode. Lion 10.7.3
|
|
|
| Bluetooth Micro Dongle USB Adapter
|
CUBIX
|
noname
|
Works OOB. Recognized as "ProductID:0x0001 VendorID:0x0a12 (Cambridge Silicon Radio Ltd.)"
|
|
|
| USB Webcam
|
Mikomi
|
Mikomi DC-7120
|
works OOB, recognised in Photobooth and FaceTime
|
|
|
| USB Webcam
|
Logitech C270
|
Logitech
|
both video/mic works OOB (Photobooth, FaceTime, Skype, etc.)
|
|
|
| USB Webcam
|
Logitech C300
|
Logitech
|
both video/mic works OOB (Photobooth, FaceTime, Skype, etc.)
|
|
|
| USB Webcam
|
Facecam 1000
|
Genius
|
Video SI / No trae microfono (Photobooth, FaceTime, Skype, etc.) - Funciona sólo si está conectada cuando se enciende. Si se desconecta y luego se vuelve a conectar no funciona, hay que reiniciar para que vuelva a funcionar
|
|
|
![[9]](http://danieltetzlaff.de/Bildschirmfoto%202012-03-28%20um%2008.32.15.png){kind=link}