macOS 10.9.1
Hardware Compatibility
|
|
|
|
This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.
- ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
- Please add hardware into tables.
- This is for 10.9.1 builds only.
For how to edit the Wiki, please see this thread. Thank you!
You're looking for an Installation guide? see here
Note: For suggestions about table headings, please join the
discussion here.
[edit] Motherboards
| Hardware Name
|
Chipset
|
Notes
|
Patches Used
|
Compatible 64bit
|
[edit] Alienware
| Hardware Name
|
Chipset
|
Notes
|
Patches Used
|
Compatible 64bit
|
[edit] Asrock
| Hardware Name
|
Chipset
|
Notes
|
Patches Used
|
Compatible 64bit
|
| G41M-VS3 R2.0
|
Intel G41
Intel ICH7
|
System Configuration:
- CPU: Intel® Core™2 Quad Processor Q8200 LGA 775
- RAM: 2x2GB Kingstone 1333 MHz
- VGA: ASUS GeForce® 210 EN210 SILENT/DI/1GD3/V2(LP)
- ETH: Atheros PCIEx1 LAN AR8152
- WIFI: TP-Link TL-WN727N
- SND: Onboard (VIA® VT1705 Audio Codec)
System Status:
- All of the above components:
- Reboot, Shutdown:
- Sleep: Works:
|
Installation method: tonyosx86 and these guide
- Boot flags: PCIRootUID=0 GraphicsEnabler=YES
- Prepare USB Drive with 10.9 Mavericks downloaded via Appstore.
- Installed with Bios set to Performance Default, No - execute memory enable.
- Update in App Store 10.9 to 10.9.1 and works everything fine.
- Graphics: Worked OOB
- Network: Works when using these kexts
- WIFI: Works when using these kexts
- USB - Worked OOB
- SATA - Worked OOB
- App Store - Worked OOB
- Sound - Works when using these kexts
|
|
[1]
| G41C-GS
|
Intel G41
Intel ICH7
|
System Configuration:
- CPU: Intel® Core™2 Quad Processor Q8200 LGA 775
- RAM: 4GB DDR3 1063 MHz Super Talent
- VGA: EVGA GeForce® GT 610 2GB
System Status:
- All of the above components:
- Reboot, Shutdown:
|
'Installation method: Pendrive USB with Mavericks downlaoded from App Store and tonyx86 method
- Boot flags: -v -f GraphicsEnabler=Yes IPGEnabler=No for installation, -f for post installation
- Installed with Bios configuration from this video
- VoodooHDA v0.2.2, EvOreboot, FakeSMC, NullCPUPowerManagement, PS/2 Keyboard, RTL81xx v0.0.90
- Graphics: Worked
- Network: Works when using Lnx2Mac's Kext
- USB - Worked OOB
- SATA - Worked OOB
- App Store - Worked OOB
|
|
| Z77 Pro-4
|
Intel Z77
|
System Configuration:
- CPU: Intel Core i5 3550 Ivy bridge with oc @ 4100 Mhz (3300 mhz stock freq.)
- RAM: 1x4GB Kingston 1333 MHz overklocked @ 1800 mhz
- VGA: ASUS GeForce® 210 EN210 SILENT/DI/1GD3/V2(LP)
- ETH: 1x Realtek RTL8111E gigabit lan
- WIFI: Icidu 150N pci-e card, with atheros ar9285 chip
- SND: Onboard ALC892
System Status:
- All of the above components:
- Reboot, Shutdown:
- Sleep: Works:
|
Installation method: Pendrive with Mavericks downlaoded from App Store and Niresh.co extra's
- Boot flags: ncpi=0x3000 GraphicsEnabler=Yes UseKernelCache=Yes
- VT-d disabled, Sata on AHCI mode
- Graphics - Worked OOB
- Network - Worked OOB
- WIFI - Works when using this kext
- USB - Worked OOB
- USB 3.0 - Worked OOB
- SATA - Worked OOB
- App Store - Worked OOB
- Sound - Works when using VoodooHDA kext
- Kernel - Vanilla Mach_kernel
|
|
| AsRock Extreme4/TB
|
Intel Z87X UEFI 1.10
|
System Configuration:
- CPU: i7-4770K Haswell
- RAM: 2x4GB G. Skill RipJawsX 2400 MHz
- VGA: Intel IGPU
- ETH: Intel i-217V
- WIFI: None
- SND: Onboard Realtek 1150
System Status:
- All of the above components:
- Reboot, Shutdown:
- Sleep: Works:
- Wake: Works:
|
'Installation method: Clover USB/UEFI - MSR patch on the fly
- Boot flags: Default Clover, MacPro 6,1
- Prepare USB Drive with 10.9 Mavericks downloaded via Appstore.
- Installed with UEFI set to Default
- Update in App Store 10.9 to 10.9.1 and works everything fine.
- Graphics: HDMI Worked OOB VGA
- Thunderbolt/DisplayPort
- Network: Works when using hnak-AppleIntelE1000e.kext
- WIFI: NA
- USB2/3 - Worked OOB
- SATA - Worked OOB
- App Store - Worked OOB
- iCloud
- iMessage
- Sound - Works when using modified HDA/HDAEnabler1 or toleda kext patch
- Overclocked 4.6Ghz, XMP 1.1 - Very Stable.
- Disable onboard sound - sleep/wake is perfect.
- With onboard sound, spinning wheel after wake. Essentially frozen.
|
|
| Asrock 990FX Extreme4
|
AMD 990FX
|
System Configuration:
- CPU: AMD Phenom II X4 965BE
- MOBO: Asrock 990FX Extreme4
- RAM: Corsair Vengence Blue 8GB DDR3-1600MHZ
- HDD: Toshiba SATA 320GB 5400rpm
- Video: XFX Radeon HD7750 R Core Edition
- Audio: Realtek onboard ALC892 with VoodooHDA 2.8.4 u have Crackling Sound i bought an USB Soundcard!
- Network: TP-Link TL-WDN 4800 works OOB!
- Sleep & wake -> Ok
|
Installation method:
- Bios set AHCI Mode. Then installed Mavericks with help of Video MegaTorch.( Download Mega Torch, Open Carbon Copy Cloner and Clone the DMG to an USB Stick. Install Chameleon Bootloader to USB Stick)
- Then Boot from Stick. With my Setup i have to boot with, for amd i used. amd_kernel GraphicsEnabler=No npci=0x3000(or npci=0x2000) -v if u dont get any Graphic shown up. I had an HDMI to DVI Connected and when i change to * HDMI > HDMI i got working Screen
- Then it Boots up. Go to Diskutility and Format the HDD to GUID Table and Mac Journaled. Then Install Mavericks. After Complete Reboot. Boot USB Stick and then in Chameleon Make these Flags. Select MACHD enter bootflag. hd(Your * USB Stick)/amd_kernel GraphicsEnabler=No npci=0x2000 or 3000 -v Then os Should boot up. If u have no Screen change to HDMI > HDMI then the screen should come online. After That u have to Copy the AMD Kernel from the Stick to * your MACHD and edit the Chameleon Boot Plist file. There u enter these Bootflags and change the mach_kernel to amd_kernel. I made the update to 10.9.1 and its fine. Hope i helped.
|
|
| Hardware Name
|
Chipset
|
Notes
|
Patches Used
|
Compatible 64bit
|
| P8Н77-V
|
Intel H77
|
System Configuration:
System Status:
- Sleep (Not tested), Reboot, Shutdown:
|
Installation method:
Installation is via Disk Utility. Simply select the partition and restore the OS
Updated 10.9 to 10.9.1 via apple software updated
|
|
| P8Н67-M LE
|
Intel H67
|
System Configuration:
- CPU: Intel Core i5 2500 (non-K) 3.3Ghz (Sandy Bridge)
- GPU: Sapphire Radeon HD5670 1GB GDDR5
- RAM: Corsair 2x4 GB DDR3-1333
- LAN: Realtek RTL8112L
- AUDIO: Realtek ALC887
- USB 2.0: OOB
- USB 3.0: (Renesas Electronics USB 3.0)
System Status:
- Sleep (Work, Patch DSDT), Reboot, Shutdown:
|
Installation method:
Installation with USB stick
- DSDT
- Audio: Work with AppleHDA patch for ALC887 and Patch DSDT
- Graphics: Works OOB (GraphicsEnabler=No)
- Network: Install .kext
- SMBios.plist iMac 12.2
|
|
| P6X58D-E
|
Intel X58
|
System Configuration:
System Status:
- Sleep, Reboot, Shutdown:
|
Installation method:
Create installer with myHack, install normally, then install 10.9.1 update.
- Audio: Injected ALC889
- Network: Injected intel 1000
|
|
| Asus MAXIMUS IV GENE-Z
|
Intel Z68
|
System Configuration:
- CPU: Intel 4770k i7
- GPU: 2xEVGA 570GTX SLI
- RAM: 4x4 GB DDR3-1600
- LAN: Onboard Intel 1000
- AUDIO: Onboard Realtek ALC889
- USB 3.0: NEC Renesas uPD720200
System Status:
- Sleep, Reboot, Shutdown:
|
Installation method:
Create installer with myHack, install normally, then install 10.9.1 update
- Chamelon 2.2(Raid0 support) & custom written boot.pl
- Audio: AppleHDA for ALC889 (need´s to install again if update)
- Network: intel 1000
|
|
| ASUS P8B75-M-LX
|
Intel B75
|
System Configuration:
- CPU: Intel Core i3 [email protected] (ivy bridge)]
- GPU: AMD Radeon HIS 6870 IceqX 1 GB
- RAM: 2x2 GB DDR3-1333
- LAN: onboard
- Wi-Fi: —-
- AUDIO: VIA VT1708S
- USB 2.0
- USB 3.0 Yes
System Status:
- Sleep works, Reboot, Shutdown:
|
Installation method:
Using this guide http://www.insanelymac.com/forum/topic/280756-guide-the-all-in-one-guide-to-vanilla-os-x-including-chameleon-dsdt-for-beginners-updated-for-mavericks/
- Audio: VoodooHDA for VIA VT1708S]
- Graphics: Works. I used -x flag during installation process.
- SMBios.plist iMac 13.2
- Geekbench 5429
|
|
| ASUS P8B75-M-LE
|
Intel B75
|
System Configuration:
- CPU: Intel Core i5 3550
- GPU: EVGA GTX 660 Ti SC
- RAM: 1x8 GB DDR3-1600
- LAN: onboard
- Wi-Fi: —-
- AUDIO: VIA VT1708S
- USB 2.0
- USB 3.0 Yes
System Status:
- Sleep works, Reboot, Shutdown:
|
Installation method:
- Audio: VoodooHDA 2.8.2 for Via VT1708S
- Graphics: Works. GraphicsEnabler=No
- SMBios.plist iMac 13.2
|
|
| P5B Deluxe
|
Intel P965 / ICH8R
|
System Configuration:
System Status:
- Sleep (Not tested), Reboot, Shutdown:
|
Installation method:
Installation using USB Stick with Mavericks Retail from AppStore
Updated 10.9 to 10.9.1 via apple software updated
- Audio: [Driver from http://www.m-audio.com M-Audio Website]
- Graphics: Works OOB (GraphicsEnabler=No)
- Network: [Kext from http://www.osx86.net/files/file/1397-marvell-yukon-88e8056/]
- Wi-Fi: Insert "<string>pci168c,30a1</string>" after "<string>pci168c,24</string>" in /System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AirPortAtheros40.kext/Contents/Info.plist
- Firewire only after removing /System/Library/Extensions/AppleHPET.kext
- SMBios.plist MacPro 3,1
|
|
| P6T Deluxe (not V2)
|
Intel X58
|
System Configuration:
- CPU: Intel i7 920 (Nehalem)
- GPU: EVGA GeForce 260 GTX
- RAM: 2x2 GB DDR3 Corsair
- LAN: onboard (Marvell Yukon 88E8056)
- AUDIO: ADI AD2000B
- USB 2.0
System Status:
- Sleep (Not tested), Reboot, Shutdown:
|
Installation method:
Install using the myHack guide (using 10.9.1)
|
|
| P6T Deluxe V2
|
Intel X58
|
System Configuration:
- CPU: Intel Core i7 920 @ 3.76 GHz
- GFX: 2 x EVGA GTX 660 Ti FTW Sig2 2GB
- ETH: Marvel Yukon Gigabit 88E8056x2
- Audio: AD2000b
- HD: WD Raptors 2 x 500GB @ 6GBs w/RocketRAID 640L SATA Controller
System Status:
- All of the above components:
- Sleep, Reboot, Shutdown:
|
Patches:
- Installer: grab a 8gig usb drive. myHack
- Resources Post install
- KextWizard
- Chameleon
- Bootable RAID 0
- Install Method : First, install the OS, I put the OS on a single disk and CCC onto the RAID 0. but boot up the installer, 1 partition, guid the usual, finish install, update. use the extra folder from the root of the usb installer, drop it to the root of your hard drive. install kexts in Patched-12D78.zip from Resources Post intall with KextWizard to S/L/E. Drop your specific DSDT from Resource post into the root of your Extra folder. Install Chameleon to the ML drive, Repair Permissions & Rebuild Cache on both Extra & S/L/E. Install Web Drivers for CUDA / OpenGL. For bootable RAID 0 follow directions in link Bootable RAID 0.
|
|
[edit] Biostar
| Hardware Name
|
Chipset
|
Notes
|
Patches Used
|
Compatible 64bit
|
| Hardware Name
|
Chipset
|
Notes
|
Patches Used
|
Compatible 64bit
|
[edit] Foxconn
| Hardware Name
|
Chipset
|
Notes
|
Patches Used
|
Compatible 64bit
|
[edit] Gigabyte
| Hardware Name
|
Chipset
|
Notes
|
Patches Used
|
Compatible 64bit
|
| GA-H81M-HD3
|
Intel® H81 Chipset
|
System Configuration:
- CPU: Intel Core i3 3.5Ghz (i3 4330)
- GPU: GTX 650
- RAM: Kingston DDR3-1333 4GB
System Status:
- Shutdown
- Restart
- Sleep
- GPU:
- USB 2.0
- USB 3.0
- Ethernet
- Audio:
- Dual monitor:
- HDMI:
Notes:
- Internal GPU disable it in BIOS
|
Notes:
- Everything works perfectly! Install method with myHack, but after the install should change the Chameleon to the latest, because the timebase is too fast with the original (?) !
- For quick (20 minutes) install: use USB 2 sockets only! On the first install boot, use "GraphicsEnabler=No" for this video card!
- I repaired the dsdt.... I enclose the used (few) patches here (audio/LAN/USB3) : http://www.mediafire.com/download/tw5qhfaoawrl3qg/H81_Mac.zip (I think this may work perfectly with stronger configurations as well: i5 4570 / GTX760 / 8-16 GB RAM )
- enjoy!
|
|
| GA-H55M-UD2H rev 1.0
|
Intel® H55 Chipset
|
System Configuration:
- CPU: Intel Core i5 3.2Ghz
- GPU: Some cheap built in one has DVI and VGA
- RAM: Corsair 666Mhz DDR3-1333 8G Total
System Status:
- Shutdown
- Restart
- Sleep
- GPU:
- USB 2.0
- Ethernet
- Audio:
Notes:
- Internal GPU worthless, disable it in BIOS
|
Notes:
- BIOS updated to F11, and used DSDT
- Installed on 3TB disk, Dual boot Win7.
- Need to turn off Memory Boost in Bios, was experiencing random lockups/crashes. Memtest86 was showing errors.
- DUAL screens ok w/ BFG Nvidia 9800 gt 512MB. Does not support 1080 but lower rez is ok. Wored OOB
- Problem is I had 4 screens which originally I was running Win7 fine. 2 of the screens required 1080. I tried about 8hrs and gave up and could never get 1080p so I purchased two XFX Radeon 6670 1g ($40 each eBay) and trashed 9800 so video setup currently:
- Graphics: Works OOB. Dual XFX Radeo 6670 with 4 monitors! Yeah baby, all connected via DVI to ASUS MX279 (1920x1080) + NEC LCD1970GX (1280x1024) + Westinghouse L2046NV (1400x1050) + JVC JLC37BC300 (1920x1080)
- USB Camera: Logitech HD720p Wored OOB
- Sleep/Shutdown: pmset shows error "Kernel Assertions: 0x4=USB". Displays go to sleep but CPU fan and MB stay on. I normally Logout, then select Shutdown, then wait for HD activity light to go out and power off. Sometimes system shuts off I think if I wait long enough not sure really. Might be busy doing stuff w/ TimeMachine (and internal 3TB HD configured to backup).
- Everything works (iTunes, AppStore, Built in Audio, Mic Input on MB, USB camera, Facetime, VirtualBox, Android Studio) except sleep/shutdown.
|
|
| GA-Z68X-UD3H-B3 rev1.3
|
Intel® Z68 Express Chipset
|
System Configuration:
- CPU: Intel Core i5 - 2500K
- GPU: Intel HD3000/AMD Radeon R9 270X PCS+
- RAM: Kingstone HyperX 2x4GB 1333Mhz
System Status:
- Shutdown
- Restart
- Sleep
- GPU:
- USB 2.0
- USB 3.0
- Ethernet
- WiFi Atheros AR928X
- Audio: ALC889 (binary patched)
Notes:
- All works properly with UEFI U1L BIOS
|
- Gigabyte Z68X-UD3H-B3 pack / all-in-one post-installation pack designed specifically for this motherboard. Updated 10.9.0 to 10.9.1 via apple software updated.
|
|
| GA-P35-DS3R Rev.1.0
|
Intel® P35 + ICH9R
|
System Configuration:
System Status:
- Sleep, Reboot, Shutdown
|
Installation method:
Installation is Mavericks Simple Vanilla Hackintosh Install Guide.
Updated 10.9.0 to 10.9.1 via apple software updated.
- DSDT (Generate on OS X and patched.) Patched for Orange icon and DVD problem. No using other kexts. ex: IOAHCIBlockStorageInjector.kext etc....
- SSDT (Generate on OS X)
- Audio: Realtek ALC AppleHDA
- Graphics: Works OOB. (Tested DVI to HDMI, DVI to D-SUB.) Replace after OS X installation.
- Network: Lnx2Mac's Realtek RTL81xx Driver
- SMBios.plist: MacPro 3.1
- boot.plist: GenerateCStates = yes, GeneratePStates = yes, GraphicsEnabler = yes
- Blender cycles rendering got Cuda boost!
|
|
| GA-B75M-HD3 Rev.1.0
|
Intel® B75 Express
|
System Configuration:
System Status:
- Sleep, Reboot, Shutdown
|
Installation method:
- Audio: Realtek ACL887/888b (HDAEnabler1.kext) + 3 Port Audio Enabler (HDAEnabler2.kext)
- Graphics: Works OOB.
- Network: Realtek RTL81xx Driver (AppleRTL8169Ethernet.kext)
- SMBios.plist: iMac 13,2
- FakeSMC v5.3.820 + Plugins
- NullCPUPowerManagment
- Zenith432's GenericUSBXHCI.kext
- AppleACPIPlatform Rollback (10.8.1 Rollback)
|
|
| GA-H87M-D3H
|
Intel® H87 Express
|
System Configuration:
- CPU: Core i5 4440 @ 3.1Ghz
- GPU: Gainward GeForce GTX650 2048MB
- RAM: Adata 8GB DDR3 1333Mhz
- HDD: Seagate Barracuda 500GB 7200rpm + Seagate 1TB data storage
- LAN: Onboard (Realtek RTL8111F)
- AUDIO: Onboard (Realtek ALC892)
- USB 2.0
- USB 3.0
System Status:
- Sleep, Reboot, Shutdown
|
Installation method:
- OsX 10.9.0 from app store followed by manual 10.9.1 update
- Install osx via USB stick using latest Chameleon and FakeSMC
- Latest Chameleon 2.2 (need to use boot0 error fix using USB installer)
- Audio: Realtek ACL892 (HDAEnabler1.kext) + 5 Port Audio AppleHDA.kext
- Graphics: Works OOB. (Kepler GPU powermanagement works) dual monitor setup working: extended desktop / desktop mirroring (1920*1080p in both monitors).
- Network: Realtek RTL8111F Driver downloaded from (http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false)
- SMBios.plist: iMac 13,2 / iMac 14,2
- Latest FakeSMC + Plugins
- Native CPUPowerManagment (only lowest and highest Pstates working)
|
|
| GA-Z77-HD3
|
Intel® Z77 Express Chipset
|
System Configuration:
- CPU: Intel Core i7 - 3770
- GPU: Intel HD4000
- RAM: Super Talent 2x4GB 1333Mhz
System Status:
- Shutdown
- Restart
- Sleep
- GPU:
- USB 2.0
- USB 3.0
- Ethernet
- Audio: ALC887
|
Installation method:
- osx 10.9.0 from app store
- install osx via USB stick
- Hdmi Audio Patched using this guide https://github.com/toleda/audio_hdmi_hd4000
- install patched audio aml. add the realtek lan & dsdt audio 887 current, usb 3.0,
- reboot.
|
|
| GA-Z77X-UP5 TH
|
Intel® Z77 Express Chipset
|
System Configuration:
- CPU: Intel Core i7 - 3770
- GPU: Club3D HD 6870 Coolstream Edition
- RAM: G.Skill Ripjaws X 2x4 Gb 1600 Mhz
- SSD: Samsung 840 128 Gb
- Wi-fi: AR9285 on GC-WB300D (including the ar9462 is not working)
System Status:
- Shutdown
- Restart
- Sleep
- GPU:
- USB 2.0
- USB 3.0
- Ethernet
- Wi-fi
- Firewire 400
- Thunderbolt (No Hotplug)
- Audio: ALC898
|
Installation method:
|
|
| Hardware Name
|
Chipset
|
Notes
|
Patches Used
|
Compatible 64bit
|
| DG45ID
|
Intel G45/ICH10
|
- Ethernet Fully Functional, Shutdown/Restart work without problem.
- Needs USB Legacy support on in BIOS to boot USB drive, which in turn requires USBBusFix=Yes in Chameleon. Certain ports and devices don't work unless -f or -x flag is used at boot - still investigating.
- IDT 92HD73E sound mostly works when VoodooHDA is first installed, but VoodooHDA KP's shortly after login - still a work in progress.
|
- Chameleon 2.2svn r2286 via Chameleon Wizard 4.2.3
- Graphics Enabler
- Ethernet Built In
- USB Bus Fix flags true
|
|
[edit] PCWARE
| Hardware Name
|
Chipset
|
Notes
|
Patches Used
|
Compatible 64bit
|
| Hardware Name
|
Chipset
|
Notes
|
Patches Used
|
Compatible 64bit
|
[edit] Graphics Cards
Please specify if your card is PCI-E or Integrated.
Also, place chip and board manufacturer in their respective column.
[edit] AMD/ATI
| Model
|
Board-Manufacturer
|
Notes
|
QE/CI
|
Output
|
Dual display
|
Compatible 64bit
|
| Radeon HD 4830
|
Sapphire
|
- Using QE_CI Exotic patch
- Chameleon 2.0 RC5 (or the most recent) or PCEFI 10.6 Lion + Snow
- GraphicsEnabler=Yes
|
|
DVI / DVI
|
Not tested
|
|
| Radeon HD 5670 512MB
|
Sapphire
|
- Works OOB (no additional boot flags or kexts needed)
- Tested using Chameleon 2.2
|
|
DVI / HDMI (VGA not tested)
|
Yes
|
|
| Radeon HD 6450 2GB
|
Sapphire
|
- Works OOB
- GraphicsEnabler=No
|
|
DVI/HDMI/VGA
|
Yes
|
|
| Radeon HD 6570
|
XFX (ON-XFX1-MMAC)
|
- Works OOB 10.9
- Gives 2560x1440 on DVI OOB(others not tested)
- No Drivers or Flags needed. (Using on GA-Z87-HD3 with 4670k)
|
|
DVI / HDMI / VGA
|
Yes
|
|
| Radeon HD 6670
|
Sapphire
|
- Using myHack 3.3.1 with Chameleon 2.2 SVN 2266 as described in this tutorial
- GraphicsEnabler=Yes
|
|
DVI / HDMI / VGA
|
Not tested
|
|
| Radeon HD 6770
|
Sapphire
|
- Using DSDT Inject method
- Chameleon 2.0 RC5 (or the most recent) or PCEFI 10.6 Lion + Snow
- GraphicsEnabler => No more need!!!
|
|
DVI / HDMI / VGA
|
Not tested
|
|
| Radeon R9 270X PCS+
|
PowerColor
|
|
|
DVI / DVI / HDMI / DP
|
Yes
|
|
[edit] NVIDIA
[edit] Integrated
| Model
|
Board-Manufacturer
|
Notes
|
QE/CI
|
Output
|
Dual display
|
Compatible 64bit
|
[edit] Network Cards
[edit] Wireless
| Interface
|
Standard
|
Device
|
Manufacturer
|
Chipset
|
Notes
|
Compatible 64bit
|
| PCI
|
802.11 b/g/n
|
TL-WN851N
|
TP-Link
|
Atheros AR922x
|
Instal this kext. Seen as Airport Extreme. AirDrop works.
|
|
| USB
|
802.11 b/g/n
|
Ralink
|
Ralink
|
Ralink 5370
|
Offsite download utilites&kext. AirDrop works.
|
|
| USB
|
802.11 b/g/n
|
TL-WN727N v3
|
TP-Link
|
Ralink RT5370
|
Instal this kext. AirDrop works.
|
|
| USB
|
802.11 b/g/n
|
Ansel 2720
|
Ansel
|
Ralink RT2770F
|
Download driver from MediaTek.
|
|
| PCI-e
|
802.11 b/g/n
|
TL-WN781ND v1
|
TP-Link
|
Atheros AR9285
|
Insert "<string>pci168c,30a1</string>" after "<string>pci168c,24</string>" in /System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AirPortAtheros40.kext/Contents/Info.plist. Seen as Airport Extreme. AirDrop works.
|
|
| USB 2.0
|
802.11 n / g / b
|
00062778 WLAN
USB 2.0 150Mbps
|
Hama
|
Not confirmed
(Ralink)
|
Working with UI 4.0.9.6 Drv: 4.2.9.2
https://www.hama.com/webresources/drivers/00062/00062778_macosx107_108_109_dv4_2_9_2_uiv4_0_9_6.dmg
Tested and working properly. Thx to kaefpe.me
|
|
[edit] Wired (Ethernet)
| Interface
|
Standard
|
Device
|
Manufacturer
|
Notes
|
Compatible 64bit
|
| Internal (PCIE)
|
10/100
|
RTL8168
|
Realtek
|
Works with official Realtek driver for 10.7.X
|
|
[edit] Sound Cards
| Interface
|
Hardware Name
|
Manufacturer
|
Notes
|
Compatible 64bit
|
[edit] Webcams
| Interface
|
Item Description
|
Manufacturer
|
Notes
|
Compatible 64bit
|
[edit] Bluetooth
[edit] USB 3.0 Cards / Adapters
| Type of Accessory
|
Item Description
|
Manufacturer
|
Notes
|
Compatible 64bit
|
[edit] Keyboard & Mouse
[edit] Wireless
| Interface
|
Item Description
|
Manufacturer
|
Model No
|
Notes
|
Compatible 64bit
|
