HCL 10.9.5

From OSx86
Jump to: navigation, search
macOS 10.9.5
Hardware Compatibility

This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for 10.9.5 builds only.

For how to edit the Wiki, please see this thread. Thank you!

You're looking for an Installation guide? see here

Note: For suggestions about table headings, please join the discussion here.

Contents

[edit] Motherboards

[edit] Abit

Hardware Name Chipset Notes Patches Used Compatible 64bit

[edit] Alienware

Hardware Name Chipset Notes Patches Used Compatible 64bit

[edit] Asrock

Hardware Name Chipset Notes Patches Used Compatible 64bit
Z77 Pro-4 Intel Z77 System Configuration:
  • CPU: Intel Core i5 3550 Ivy bridge with oc @ 4100 Mhz (3300 mhz stock freq.)
  • RAM: 1x4GB Kingston 1333 MHz overklocked @ 1800 mhz
  • VGA: ASUS GeForce® 210 EN210 SILENT/DI/1GD3/V2(LP)
  • ETH: 1x Realtek RTL8111E gigabit lan
  • WIFI: Icidu 150N pci-e card, with atheros ar9285 chip
  • SND: Onboard ALC892

System Status:

  • All of the above components: Tick.png
  • Reboot, Shutdown: Tick.png
  • Sleep: Works: Tick.png
Installation method: Pendrive with Mavericks downloaded from App Store and Niresh.co extra's
  • Boot flags: ncpi=0x3000 GraphicsEnabler=Yes
  • VT-d disabled, Sata on AHCI mode
  • Graphics - Worked OOB Tick.png
  • Network - Worked OOB Tick.png
  • WIFI - Works when using this kext Tick.png
  • USB - Worked OOB Tick.png
  • USB 3.0 - Worked OOB Tick.png
  • SATA - Worked OOB Tick.png
  • App Store - Worked OOB Tick.png
  • Sound - Works when using VoodooHDA kext Tick.png
  • Kernel - Vanilla Mach_kernel Tick.png
Tick.png
Asrock G41 VS3 r2 G41 Everything works OOB

Sleep Restart Shutdown

My Hack App to Setup Mavericks to USB Tick.png
ASRock Conroe1333-DVI/H Intel 945G Chipset System Configuration:
  • CPU: Intel Core2duo™ E7300 2,66 Ghz/3M L2 Cache
  • GPU: XFX Geforce 9800 GT 512 MB
  • RAM: 2 x Kingston 2GB DDR2 800 [email protected] MHz

Component Status:

  • Shutdown Tick.png
  • Restart Tick.png
  • Sleep Cross.png
  • USB 2.0 Tick.png
  • Ethernet Tick.png
  • Video: DVI Tick.png,
  • Audio: USB Sound card Tick.png
  • Webcam: Old Trust webcam (i don't know the type)

Niresh 10.9.1 updated to 10.9.5. Chameleon with boot flags: npci=0x2000, Graphicsenabler=Yes, SMbios=MacPro 3.1, patched DSDT (recommend only for faster boot time)

[edit] Asus

Hardware Name Chipset Notes Patches Used Compatible 64bit
P5L-MX Intel 945G + ICH7 System configuration:
  • CPU: Intel Core 2 Duo E4400
  • GPU: MSI R4850-2D1G-OC
Dual monitors
  • RAM: 2 GB DDR2 800 MHz
  • HDD: SAMSUNG HD253GI
GPT formatted with EFI partition
  • Audio: Onboard ADI AD1986A
  • LAN: Onboard Atheros L1 (Gigabit Ethernet)

BIOS settings:

  • Legacy USB Support: Disabled
  • Onboard IDE Operate Mode: Enhanced Mode
Enhanced Mode Support On: S-ATA

System status:

  • Graphics: Tick.png
VGA in "lower" port (closer to motherboard) and DVI up top. The opposite fails. Haven't tried with two DVI or VGA monitors.
  • Audio: Stereo rear output, looking into patching AppleHDA
  • Ethernet: Tick.png
  • USB 2.0: Tick.png
  • PS/2: Tick.png
  • Power management: Tick.png including sleep
  • App Store, iCloud: Tick.png
  • iMessage/FaceTime Cross.png
May be due to Clover, or due to my many trials and Apple having enough
Installation method:
myHack modified App Store installer imaged onto an external HDD

Post-install:

  • Clover installed onto EFI partition along with kexts:
Boot flags:
  • npci=0x2000
SMBIOS set to iMac9,1

Graphics:

  • Clover ATI injection
  • Patched kexts via Clover and FakeSMC as per guide
  • Patched connector data for dual monitors, also via Clover. Used MotMot framebuffer

Audio:

Used the latest VoodooHDA to limited success. Looking into AppleHDA.
Tick.png

[edit] Biostar

Hardware Name Chipset Notes Patches Used Compatible 64bit

[edit] EVGA

Hardware Name Chipset Notes Patches Used Compatible 64bit

[edit] Foxconn

Hardware Name Chipset Notes Patches Used Compatible 64bit

[edit] Gigabyte

Hardware Name Chipset Notes Patches Used Compatible 64bit
GA-H97M-D3H Intel® H97 Chipset

System Configuration:

  • CPU: Intel Core i3-4130T @2.9 GHz
  • GPU: internal Intel HD 4400
  • RAM: G.Skill Ripjaws X Series 4GB (2 x 2GB) DDR3-1600

Component Status:

  • Graphics: Intel Integrated Graphics HD 4400 Cross.png
  • Audio: Realtek ALC892 Tick.png
  • Ethernet: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Tick.png
  • USB 3.0 Tick.png
  • TimeMachine, App Store, iMessage, Facetime Tick.png
  • Sleep, Wakeup, Poweroff Tick.png

BIOS changes:

  • Sata mode is AHCI (default)
  • Vt-D is disabled (default)

Installation Method:

  • myHack 3.3.1

Post-Installation:

Tick.png
GA-H97-D3H Intel® H97 Chipset

System Configuration:

  • CPU: Intel Core i3-4690 @3.5 GHz
  • GPU: internal Intel HD 4600
  • RAM: Kingston Value ram KVR1600 16GB (2 x 8GB) DDR3-1600

Component Status:

  • Graphics:[Inject id through chameleon with patched IntelAzulFB, had to remove IntelHD3/4*.kexts GraphicsEnabler=Y, IGPEnabler=Y] Intel Integrated Graphics HD 4600 Tick.png
  • Dual Monitor: [works with hdmi and dvi-i]
  • Audio: [voodoo kext front spk out works haven't tested the micophone]Realtek ALC1150 Tick.png
  • Ethernet: [Works OOB] Intel® GbE LAN chip (10/100/1000 Mbit) Tick.png
  • USB 3.0 Tick.png
  • TimeMachine, App Store, iMessage, Facetime NOT TESTED Cross.png
  • Sleep ,Wakeup , Poweroff all work after uefi boot with clover Tick.png

BIOS changes:

  • UEFI and Legacy, Have not tried UEFI boot yet (update:post installed clovee now it is uefi only)
  • Sata mode is AHCI (default)
  • Vt-D is disabled (default)

Installation Method:

  • niresh 10.9.0 , combo update 10.9.5

Post-Installation:

  • FakeSMC 6.9.x
  • VGA: [IntelAzulFB] Tick.png
  • Audio: [Voodoo Kext] Tick.png
  • Systems Definition Imac 14.2
Tick.png
GA-H77-DS3H Intel® H77 Express Chipset System configuration:
  • CPU: Intel Core i5 @ 3.20GHz
  • GPU: MSI NVIDIA GeForce GTX 650 1024MB
  • RAM: 8GB

Installation method:

  • App Store 10.9.0 InstallESD.dmg
  • USB Installation with Clover UEFI

System Status:

  • Graphics: QE, full 3D acceleration Tick.png
  • Audio Tick.png
  • Ethernet Tick.png
  • USB 2.0 Tick.png
  • App Store Tick.png
  • Sleep, Wakeup, Poweroff Tick.png
Post-installation:

Clover installation on EFI partition (UEFI only)

  • Audio -> toleda's patch [1]
  • System definitions -> iMac 13,2
  • FakeSMC
  • OS X Updates: 10.9.5 Combo update
Tick.png
GA-H77-DS3H Intel® H77 Express Chipset System configuration:
  • CPU: Intel Xeon E3-1230V2 @ 3.30GHz
  • GPU: XFX Radeon HD 6850 1024MB
  • RAM: 8GB 1866MHz Kingston HyperX Fury Red Series CL10

Installation method:

  • App Store 10.9.5 InstallESD.dmg
  • USB Installation

System Status:

  • Audio Tick.png
  • Ethernet Tick.png
  • USB 2.0 Tick.png
  • USB 3.0 Tick.png
  • App Store Tick.png
  • Sleep, Wakeup, Poweroff Tick.png
Post-installation:

Configuration:

  • Realtek ALCxxx > ALC887/888b Current v100302
  • NullCPUPowerManagement
  • USB 3.0 - Universal
  • AppleRTC Patch for CMOS Reset
  • AtherosE2200Ethernet v1.0.0d7
  • Hibernate Mode - Desktop Customize
  • System Definitions - iMac 13,2
Tick.png
GA-EP45-DS4 (rev. 1.0) Intel® P45 Express Chipset System configuration:
  • CPU: Intel Xeon 3360 @ 2.8GHz
  • GPU: ASUS GeForce 8800 GTS 320Mb
  • RAM: 8GB 800MHz DDR2

Installation method:

  • App Store 10.9.5 InstallESD.dmg
  • USB Installation

System Status:

  • Audio Tick.png
  • Ethernet Tick.png
  • USB 2.0 Tick.png
  • App Store Tick.png
  • Sleep, Wakeup, Poweroff Tick.png
Post-installation:

Configuration:

  • System Definitions - Mac Pro 3,1
  • Audio ALC885/889a
  • Optional 3 Port (5.1) Audio
  • FakeSMC v6.9.1315
  • RealtekRTL8111 v1.2.2
  • Patched AppleIntelCPUPowerManagement
  • AppleRTC Patch for CMOS Reset
Tick.png

[edit] Intel

Hardware Name Chipset Notes Patches Used Compatible 64bit
Intel DG41RQ Intel G41 (ICH7) System configuration:
  • Intel Core 2 Duo E7500
  • Intel G41 chipset (last Bios)
  • HDD: SAMSUNG HD250HJ (250 GB)
  • RAM: 2x 2GB kingston DDR2 800
  • NVIDIA GeForce 9300 GE 512MB GDDR3 (GraphicsEnabler)
  • HDA: Realtek ALC662
  • NIC: Realtek RTL8111D
Installation method:

Installing:

  • Install first by USB in HD.
  • Boot HD with Clover in USB and Install Combo OS X Mavericks 10.9.5 Update
  • Boot HD with Clover in USB and Install Clover EFI bootloader [sourceforge.net/projects/cloverefiboot/]
  • Mount EFI Volumn in USB and copy a EFI directory to the HD:
  1. sudo mkdir /Volumns/EFI
  2. sudo mount_msdos /dev/disk1s1 /Volumns/EFI/
  • this method copy a main kexts to your Hackintosh booting:
  1. AHCIPortInjector.kext , IOAHCIBlockStorageInjector.kext, AppleACPIPS2Nub.kext, VoodooPS2Controller.kext, Disabler.kext, VoodooPS2Keyboard.kext, FakeSMC.kext, VoodooPS2Mouse.kext, GenericUSBXHCI.kext, VoodooPS2Trackpad.kext.
  • Not need install AppleHDADisabler.kext, because happen kernel panic. Just remove AppleHDA.kext:
  1. cd /System/Library/Extensions/
  2. rm -R AppleHDA.kext/

Working:

  • Shutdown/Reboot
  • Graphics acceleration (2D/3D)
  • Most applications including Adobe Premiere, Apple Store and the like

Known issues:

  • Sleep mode works turn off display and wake up asking password of user.
  • Need to create one AppleHDA.kext based on ALC662 to Intel DG41RQ.
Tick.png

[edit] MSI

Hardware Name Chipset Notes Patches Used Compatible 64bit
H81i Intel® H81 Chipset

System Configuration:

  • CPU: Intel Pentium G3258 @ 3.20GHz
  • GPU: MSI GTX 760 Mini-ITX Gaming
  • RAM: 4GB 1866MHz

Component Status:

  • Graphics: MSI GTX 760 Mini-ITX Gaming Tick.png
  • Audio: ALC887 Tick.png
  • Ethernet: RTL 8111G Tick.png
  • USB 3.0 Back Panel (Dedicated USB Chip) Tick.png
  • USB 3.0 Front Panel (Intel) Tick.png
  • TimeMachine, App Store, iMessage, Facetime Tick.png
  • Sleep, Wakeup Tick.png
  • Poweroff Tick.png

BIOS changes:

  • Sata mode is AHCI
  • O.C. (Optional)

Installation Method:

  • myHack 10.9.5
  • CloverEFI (UEFI boot from USB) boot to MyHack

Post-Installation:

  • Ethernet: Lnx2Mac's Realtek RTL81xx Tick.png
  • Audio: VoodooHDA (HDMI Audio & ALC887 Tick.png
  • USB 3.0 (Back Panel & Front Panel)) GenericUSBXHCI
  • System definitions -> iMac 14,2
  • FakeSMC Plugins -> For monitoring O.C. temps (If done)
  • HWMonitor (For monitoring O.C. temps, if done)
  • CloverEFI (UEFI Boot only) to HDD EFI partition

Notes:

  • CloverEFI -> Options -> Binaries Patching Menu-> FakeCPUID -> Put CPUID of natively supported CPU (i7, i5, i3, C2D, etc.) Note that this will define About This Mac CPU field, use CPUID of CPU you want shown here. Save this in Clover Configurator for Clover installed in EFI partition.
  • Failure to do above step will result in infinite Apple logo, with -v will be stuck at HFS: mounted on device root_device It is not known why this happens.
  • Have to use NullCPUPowerManagement.kext, or KP of AICPM.kext
  • Have to update BIOS in some cases if O.C. by pressing + on Ring/CPU Ratio does nothing (BIOS didn't officially support G3258/Haswell Refresh until certain release)
Tick.png

[edit] PCWARE

Hardware Name Chipset Notes Patches Used Compatible 64bit

[edit] QUO

Hardware Name Chipset Notes Patches Used
Z77MX-AOS-QUO Intel Z77 Ozmosis H3C.1479 BIOS

[edit] Supermicro

Hardware Name Chipset Notes Patches Used Compatible 64bit

[edit] Graphics Cards

Please specify if your card is PCI-E or Integrated.
Also, place chip and board manufacturer in their respective column.

[edit] PCI-E

[edit] AMD/ATI

Model Board-Manufacturer Notes QE/CI Output Dual display Compatible 64bit
Radeon™ HD 4830 Sapphire
  • Using QE_CI Exotic patch
  • Chameleon 2.0 RC5 (or the most recent) or PCEFI 10.6 Lion + Snow
  • GraphicsEnabler=Yes
Tick.png DVI / DVI Not tested Tick.png
Radeon™ HD 6770 Sapphire
  • Using those methods
  • Chameleon 2.0 RC5 (or the most recent) or PCEFI 10.6 Lion + Snow or Clover
  • GraphicsEnabler => No more need!!!
Tick.png DVI / HDMI / VGA Yes with FB set to Bulrushes Tick.png
R7 260X ASUS Tick.png DVI / HDMI / VGA Yes Tick.png

[edit] NVIDIA

Model Board-Manufacturer Notes QE/CI Output Dual display Compatible 64bit
GeForce GT210 Zotac/MSI

Just one of digital outputs can be used the same time, not both!

  • GraphicsEnabler=Yes
  • DropSSDT=Yes
Tick.png DVI/HDMI/VGA Tick.png Tick.png
N210 MSI
  • GraphicsEnabler=Yes
  • No Sound over HDMI + NO video playback when hdmi audio enabled
Tick.png DVI/HDMI/VGA Cross.png Tick.png
GT610 1GB Asus
  • GraphicsEnabler=Yes
  • I used Voodoo kext for HDMI Audio
  • Works OOB
Tick.png DVI/HDMI/VGA Tick.png Tick.png
GeForce GT610 2GB Twintech
  • Works OOB
Tick.png DVI/HDMI/VGA Tick.png Tick.png
GeForce 9800GT 512Mo Twintech
  • GraphicsEnabler=Yes
  • On AMD kernels, needs reverting to IOPCIFamily + AppleACPIPlatform kexts from 10.9.1 and eventual DSDT patch (for PCI root and/or card details injection)
Tick.png
  • DVI / DVI
Tick.png Tick.png
Quadro FX 3700 PNY Plug & Play, S-video not working for me. Tick.png DVI/DVI Tick.png Tick.png
GTX 560Ti PNY Plug & Play Tick.png HDMI/DVI Tick.png Tick.png
GTX 570 1280 MB PNY Tick.png 2DVI + DP + HDMI Not Tested Tick.png
GTX 770 Msi nvda_drv=1 Tick.png HDMI Tick.png Tick.png
GeForce GT 640 1GB 64-bit GDDR5 SuperClocked EVGA
  • Works OOB (DVI + HDMI = OK at 1st boot)
  • GraphicsEnabler=Yes (VGA)
  • needed SkipNvidiaGfx=Yes AND -x (safe boot) for VGA (no video) to work on Dell Optiplex 780 SFF (IGP disabled, trial and error) to activate VGA (later removed). Triple display only cloned. Spanning on either dual combi works.
  • Chameleon 2538 / Chimera v4.1.0
Tick.png DVI + HDMI + VGA Tick.png Tick.png

[edit] Integrated

[edit] INTEL

Model Board-Manufacturer Notes QE/CI Output Dual display Compatible 64bit

[edit] NVIDIA

Model Board-Manufacturer Notes QE/CI Output Dual display Compatible 64bit
GeForce 8400M GT 256Mb Sony Vaio DSDT with EDID Injection see PippoX0 post Enjoy!! QE/CI on Internal LCD Tick.png Internal LCD/HDMI/VGA Tick.png Tick.png

[edit] Network Cards

[edit] Wireless

Interface Standard Device Manufacturer Chipset Notes Compatible 64bit
mini PCIe 802.11 b/g/n tl-wdn4800 tp-link Atheros AR9380 Working OOB. Tick.png
USB 802.11 b/g/n WLA-2100 v. 2 100 SITECOM RTL8192CU/SU WORK whit this driver: http://www.edimax.com/images/Image/Driver_Utility/Wireless/NIC/EW-7811Un/EW-7811Un_Mac_driver_v1.0.0.5.zip Tick.png

[edit] Wired (Ethernet)

Interface Standard Device Manufacturer Notes Compatible 64bit
Ethernet 1000BaseT LAN1400L SUNIX Marvel Yuokon; works OOB Tick.png

[edit] Sound Cards

Interface Hardware Name Manufacturer Notes Compatible 64bit

[edit] Webcams

Interface Item Description Manufacturer Notes Compatible 64bit
USB M-Tech M-Tech WB-100 OOB test di Photo Booth Tick.png

[edit] Bluetooth

Interface Item Description Manufacturer Chipset Notes Compatible 64bit

[edit] USB 3.0 Cards / Adapters

Type of Accessory Item Description Manufacturer Notes Compatible 64bit

[edit] Keyboard & Mouse

[edit] Wireless

Interface Item Description Manufacturer Model No Notes Compatible 64bit
Retrieved from "http://wiki.osx86project.org/wiki/index.php?title=HCL_10.9.5&oldid=71101"

This page was last modified on 11 July 2016, at 09:21.
This page has been accessed 158,095 times.
Powered by MediaWiki © 2021 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki   |   Privacy policy   |   About OSx86   |   Disclaimers