HCL 10.4.3/Desktops

From OSx86
(Difference between revisions)
Jump to: navigation, search
(Restored page to non-spam version.)
Line 1: Line 1:
Someone erased the contents and added porno site links...
+
{{hardware}}
Could some restore this?
+
This is a hardware compatibility list for 10.4.3 builds. Add in how you got OSx86 running on your desktop system like the sample. Please see the discussion page for proper instructions on how to input your system specs. Also, please contribute to the [[HCL 10.4.3]] page, which should list a more granular view of compatibility.
  
En fin, siempre hay gente dedicada a perder su "valioso tiempo" molestando a los demás.
+
This page should be taken with a grain of salt. Even if your computer isn't listed, you should try it if you have a SSE2 or higher processor and has PAE.
  
He instalado OSx86 en una laptop Satellite Toshiba 2450, todo ha funcionado perfectamente excepto el sonido. Incluso he instalado Office 2004 sin problemas.
+
See the [[x86 software]] page for programs you can run without Rosetta.
 +
 
 +
REMEMBER: emulated installations do not belong on this HCL
 +
 
 +
 
 +
 
 +
== Dell Dimension 4600 ==
 +
Hardware: P4 (no SSE3), 1GB RAM, ATI Radeon 9800pro
 +
 
 +
Kernel: maxxuss-v3test with RTC patch.
 +
 
 +
VMWare: Does not boot from Daemon-Tools image with USB drive as main HDD (just hangs during bootup). Not further investigated.
 +
 
 +
Native: Boots perfectly from DVD, installs without any problems. Boot from USB drive fails (waiting for root device error). No panics observed. Avoid DVD+RW media as the built-in DVD burner seems to read them very slowly from Mac OS X (compared to DVD+R).
 +
 
 +
== Dell Dimension 4700 P4 3.0 530 ==
 +
Method: Native install, patched DVD with Maxxuss Anti-TPM
 +
 
 +
Hardware: Dell dimension 4700 P4 3.0 530, 1.5gigs ram, Intel 915graphics, ich6 audio, NEC DVDR
 +
 
 +
Comments: Native install fails - reboots at boot prompt. tried several kernel patches. I think this must be a PAE problem. Certainly the P4 530 supports it, but it is not enabled by bios. There are no options I can find in Dell/Phoenix bios (A09) for DEP, NX, or PAE. I did try the "non-NX" kernel to no avail. This machine works perfectly with 10.4.1. I'm guessing I could enable PAE under a vmware session, but I really need a speedy native system. I'll just live with 10.4.1 until somebody figures this one out!
 +
 
 +
UPDATE: Using latest Maxxuss patch (mach_kernel.test) posted 11/23, I think, I was able to boot and install! The CPU has PAE support, but no NX. I was almost ready to throw in the towel...maybe get a "J" processor...but no need. The previous nonx kernel would not boot. BTW, be very patient installing 10.4.3 native, and use verbose mode...it takes a while! Xbench scores doubled...I'll have to do more testing to see what works/doesn't.
 +
 
 +
==Dell Dimension 8200==
 +
 
 +
Method: Native install, patched DVD with Maxxuss + test4 kernel + AC97 driver
 +
 
 +
Hardware: Dell Dimension 8200, 1.8GHz Pentium 4 (Willamette), 512MB RDRAM, ATI Radeon 9600 Pro
 +
 
 +
Comments: This machine has been heavily modified from Dell spec, but still contains the original motherboard and processor, which seem to work fine. Sound is good, two channel, USB works great, all my hard drives are found, and it basically just works fine in general. Dell spec NIC card is supported as well, Intel PRO/100+. Radeon 9600 Pro works perfectly with ATI drivers, only a small bit of artifacting near the mouse cursor.
 +
 
 +
Another user attempted native install and found other partitions on intended disk damaged but recoverable. Installed instead in VMware, then dd to intended hard disk partition. Method: patched DVD with Wesley ppf; installed Maxxuss 1111A patch; updated kernel to Maxxuss v4 (Much faster!!); dd working VMware image to hardisk partition by booting virtual machine with Linux liveCD.
 +
 
 +
==Dell Optiplex GX280==
 +
 
 +
Method: Native install, patched DVD with Maxxuss Anti-TPM
 +
 
 +
Hardware: P4 650 3.4Ghz with SSE3/XD, 1GB DDR2, onboard Intel GMA915, onboard AC97 sound, WD 250G SATA, NEC 3540 DVD-Burner, Firewire PCI Card, Dell USB Multimedia Keyboard and Microsoft USB Mouse.
 +
 
 +
Comments: Native install perfectly without any problem. Intel onboard GMA900 QI and CE works, OpenGL, DVD player all works. Built-in Broadcom 1Gb Enet does NOT work, add-in generic ENet card works fine. Sound does NOT work, even copied AppleAC97Audio.kext, it won't load the extension OSX 10.4.3 very smooth and fast, Xbench 1.2 score 103.4
 +
 
 +
Updated: Sound works now! please check forum: http://forum.osx86project.org/index.php?showtopic=4645
 +
 
 +
 
 +
Second configuration:  I also have a GX280 with 2GB DDR2 in it and am only getting a 72.08 on my CPU test.  I tried loading the mach_kernel.orig and it just goes into an endless boot loop.  Any ideas what I should do?
 +
 
 +
==Dell Optiplex GX520==
 +
 
 +
Method: Native install, patched DVD with Maxxuss 1.1a patch
 +
 
 +
Hardware: P4 630 3.0Ghz with SSE3/XD, 512MB DDR2, onboard Intel GMA950, onboard AC97 sound, WD 40G SATA (!), Dell USB Multimedia Keyboard and DELL USB Mouse.
 +
 
 +
Comments: Same: Native install perfectly without any problem. Intel onboard GMA900 QI and CE works, OpenGL, DVD player all works.
 +
 
 +
Built-in Broadcom 1Gb Enet does NOT work, added an Intel generic NIC works fine. Sound does NOT work, but I didn't spent time for that. Sure someone else will succed.
 +
 
 +
System is very fast and un for 1 week without crash.
 +
 
 +
==Dell Optiplex GX620==
 +
 
 +
Method: Native install, patched DVD with Maxxuss Anti-TPM
 +
 
 +
Hardware: P4 3.2GHz with SSE3/XD, 512MB RAM, Intel onboard GMA950 QI and CE works, DVD Player and Itune also works.  Built in NIC does not work.  USB and sound works.  Display choice goes up to [email protected]
 +
 
 +
==Dell PowerEdge SC420==
 +
 
 +
First I modded the PCI Express slot using the instructions here http://www.tkdan.com/SC420/
 +
I installed X300 PCI-E and a SoundBlaster PCI sound card.
 +
 
 +
Method: Native install, patched DVD with Maxxuss Anti-TPM
 +
 
 +
Hardware: P4 2.53 Celeron with SSE3 256MB RAM, ATI X300, SoundBlaster, QI and CE works, DVD Player and Itune also works.  Built in NIC does not work.  USB and sound works.  Display choice stays at 1024x768.  There are some artifacts with the video.  Not sure if the video driver is correct.  System detected my ATI X300 64MB as a 16MB video card.
 +
 
 +
==eMachines T3406==
 +
 
 +
Method: Native install, patched DVD with Maxxuss Anti-TPM
 +
 
 +
Hardware: Celeron D 2.93GHz with SSE2, 256MB DDR SDRAM
 +
 
 +
Comments: On board sound does not work, even with AppleAC97Audio.kext. Sound works fine with my iMic USB sound card. DVD Player.app does not work. Video at 1024x768 only. This is the PC Best Buy sold for $150 on black friday.
 +
 
 +
==HP Pavillion a1245c==
 +
 
 +
Method: Native install, patched DVD with Maxxuss Anti-TPM
 +
 
 +
Hardware: AMD Athlon 64FX with SSE3,NX PAE 1GB DDR SDRAM, ATI X300 PCIe
 +
 
 +
Comments: USB sound only.
 +
 
 +
==Sony Vaio RS-620G==
 +
 
 +
Method: VMware install, patched DVD v1.0
 +
 
 +
Hardware: Pentium 4 Prescott mPGA-478 2.99GHz with SSE2, SSE3, no NX, PAE | 512MB RAM | Radeon 9200 | SoundMax integrated Audio
 +
 
 +
Comments: SoundMax card works after using the AppleAC97Audio.kext compiled for 10.4.3. The Radeon 9200 does not have QE or CI, therefore DVD Player.app does not work. Editing com.apple.boot.plist allows a max res of [email protected] (no widescreen). Everything works amazingly fast and well. Installation went quick and errorlessly in VMware, although I'm sure I could have installed natively.
 +
 
 +
==IBM Thinkpad R40 (Type 2681) *KAL* ==
 +
 
 +
Method: Native install, patched DVD with Maxxuss DVD Patcher 1.1a
 +
 
 +
Hardware: 1.8GHz Pentium 4 M (3 year old model!) with SSE2 and PAE support but no NX, 512MB RAM, ATI "Mobility" 16MB onboard, AC97 SoundMax audio, Intel Pro 10/100 Ethernet built in.
 +
 
 +
Comments: Native install worked first time with default (SSE2 no NX) kernel. No QE or CI naturally, default res of 1024x768x32 is nice and clear and very bright. Onboard network seems to work in 10.4.3 which didn't seem to in .4.1. Audio is perfectly functional and clear on output and line-in and built in mic work as well. Trackpad and pointer both work fine as does USB 2.0 ports.
 +
 
 +
==LifeBook S7010==
 +
 
 +
Method: Native install, patched DVD with Maxxuss Anti-TPM
 +
 
 +
Hardware: P-M D 2.00GHz with SSE2, 2GB
 +
 
 +
Comments: Sound does not work. Video at 1024x768. Bluetooth works great, Broadcom 10/100/1000 wired card works. wifi ipw2200bg doesnt work,
 +
 
 +
 
 +
==HP/Compaq dx2000MT==
 +
 
 +
Method: Native install, but had to swap the CD-RW for a DVD-ROM
 +
 
 +
Hardware: P4 2.80GHz, 512Mb
 +
 
 +
Comments: Still playing, installed with on board video set to 64Mb
 +
 
 +
 
 +
==HP ePC 42==
 +
 
 +
Method: Native install on partition using dd and Deamoo's image
 +
 
 +
Hardware: Pentium 4 1.6Ghz, (SSE2 only) 20 Gb ATA hard disk, AC'97 BA/BAM intel intergrated audio, 256 Mb of RAM, ATI Rage 128 pro (QE and CI are not supported) CD-ROM ( :P )
 +
 
 +
Comments: Everything as far as I can tell works, Sound in particular is of very high quality, no extra drivers needed, However OS X86 absolutely refuses to boot if one of the partitions is Windows XP, but boots fine with Windows 2000 on one of the partitions.
 +
 
 +
 
 +
==IBM A50 Model 8175-PBP==
 +
Method: Native install on partition (10.4.3 8F1099 + Maxxuss DVD/ISO Patcher v1.1a )
 +
 
 +
Hardware: Pentium 4 3Ghz (HT + SSE3 + PAE only), 1G Ram , ATI RADEON 9200 , ATEN Firewire Card + ATA 40G harddisk (NOT SATA)
 +
 
 +
Comments: Install just like Windows XP even I use ext USB DVD-Rom, All things working but The Radeon 9200 does not have QE or CI (How to fix it ??). Skype Cannot work at all. Can play DVD with VLC but so slow

Revision as of 05:31, 19 January 2006

Template:Hardware This is a hardware compatibility list for 10.4.3 builds. Add in how you got OSx86 running on your desktop system like the sample. Please see the discussion page for proper instructions on how to input your system specs. Also, please contribute to the HCL 10.4.3 page, which should list a more granular view of compatibility.

This page should be taken with a grain of salt. Even if your computer isn't listed, you should try it if you have a SSE2 or higher processor and has PAE.

See the x86 software page for programs you can run without Rosetta.

REMEMBER: emulated installations do not belong on this HCL


Contents

Dell Dimension 4600

Hardware: P4 (no SSE3), 1GB RAM, ATI Radeon 9800pro

Kernel: maxxuss-v3test with RTC patch.

VMWare: Does not boot from Daemon-Tools image with USB drive as main HDD (just hangs during bootup). Not further investigated.

Native: Boots perfectly from DVD, installs without any problems. Boot from USB drive fails (waiting for root device error). No panics observed. Avoid DVD+RW media as the built-in DVD burner seems to read them very slowly from Mac OS X (compared to DVD+R).

Dell Dimension 4700 P4 3.0 530

Method: Native install, patched DVD with Maxxuss Anti-TPM

Hardware: Dell dimension 4700 P4 3.0 530, 1.5gigs ram, Intel 915graphics, ich6 audio, NEC DVDR

Comments: Native install fails - reboots at boot prompt. tried several kernel patches. I think this must be a PAE problem. Certainly the P4 530 supports it, but it is not enabled by bios. There are no options I can find in Dell/Phoenix bios (A09) for DEP, NX, or PAE. I did try the "non-NX" kernel to no avail. This machine works perfectly with 10.4.1. I'm guessing I could enable PAE under a vmware session, but I really need a speedy native system. I'll just live with 10.4.1 until somebody figures this one out!

UPDATE: Using latest Maxxuss patch (mach_kernel.test) posted 11/23, I think, I was able to boot and install! The CPU has PAE support, but no NX. I was almost ready to throw in the towel...maybe get a "J" processor...but no need. The previous nonx kernel would not boot. BTW, be very patient installing 10.4.3 native, and use verbose mode...it takes a while! Xbench scores doubled...I'll have to do more testing to see what works/doesn't.

Dell Dimension 8200

Method: Native install, patched DVD with Maxxuss + test4 kernel + AC97 driver

Hardware: Dell Dimension 8200, 1.8GHz Pentium 4 (Willamette), 512MB RDRAM, ATI Radeon 9600 Pro

Comments: This machine has been heavily modified from Dell spec, but still contains the original motherboard and processor, which seem to work fine. Sound is good, two channel, USB works great, all my hard drives are found, and it basically just works fine in general. Dell spec NIC card is supported as well, Intel PRO/100+. Radeon 9600 Pro works perfectly with ATI drivers, only a small bit of artifacting near the mouse cursor.

Another user attempted native install and found other partitions on intended disk damaged but recoverable. Installed instead in VMware, then dd to intended hard disk partition. Method: patched DVD with Wesley ppf; installed Maxxuss 1111A patch; updated kernel to Maxxuss v4 (Much faster!!); dd working VMware image to hardisk partition by booting virtual machine with Linux liveCD.

Dell Optiplex GX280

Method: Native install, patched DVD with Maxxuss Anti-TPM

Hardware: P4 650 3.4Ghz with SSE3/XD, 1GB DDR2, onboard Intel GMA915, onboard AC97 sound, WD 250G SATA, NEC 3540 DVD-Burner, Firewire PCI Card, Dell USB Multimedia Keyboard and Microsoft USB Mouse.

Comments: Native install perfectly without any problem. Intel onboard GMA900 QI and CE works, OpenGL, DVD player all works. Built-in Broadcom 1Gb Enet does NOT work, add-in generic ENet card works fine. Sound does NOT work, even copied AppleAC97Audio.kext, it won't load the extension OSX 10.4.3 very smooth and fast, Xbench 1.2 score 103.4

Updated: Sound works now! please check forum: http://forum.osx86project.org/index.php?showtopic=4645


Second configuration: I also have a GX280 with 2GB DDR2 in it and am only getting a 72.08 on my CPU test. I tried loading the mach_kernel.orig and it just goes into an endless boot loop. Any ideas what I should do?

Dell Optiplex GX520

Method: Native install, patched DVD with Maxxuss 1.1a patch

Hardware: P4 630 3.0Ghz with SSE3/XD, 512MB DDR2, onboard Intel GMA950, onboard AC97 sound, WD 40G SATA (!), Dell USB Multimedia Keyboard and DELL USB Mouse.

Comments: Same: Native install perfectly without any problem. Intel onboard GMA900 QI and CE works, OpenGL, DVD player all works.

Built-in Broadcom 1Gb Enet does NOT work, added an Intel generic NIC works fine. Sound does NOT work, but I didn't spent time for that. Sure someone else will succed.

System is very fast and un for 1 week without crash.

Dell Optiplex GX620

Method: Native install, patched DVD with Maxxuss Anti-TPM

Hardware: P4 3.2GHz with SSE3/XD, 512MB RAM, Intel onboard GMA950 QI and CE works, DVD Player and Itune also works. Built in NIC does not work. USB and sound works. Display choice goes up to [email protected]

Dell PowerEdge SC420

First I modded the PCI Express slot using the instructions here http://www.tkdan.com/SC420/ I installed X300 PCI-E and a SoundBlaster PCI sound card.

Method: Native install, patched DVD with Maxxuss Anti-TPM

Hardware: P4 2.53 Celeron with SSE3 256MB RAM, ATI X300, SoundBlaster, QI and CE works, DVD Player and Itune also works. Built in NIC does not work. USB and sound works. Display choice stays at 1024x768. There are some artifacts with the video. Not sure if the video driver is correct. System detected my ATI X300 64MB as a 16MB video card.

eMachines T3406

Method: Native install, patched DVD with Maxxuss Anti-TPM

Hardware: Celeron D 2.93GHz with SSE2, 256MB DDR SDRAM

Comments: On board sound does not work, even with AppleAC97Audio.kext. Sound works fine with my iMic USB sound card. DVD Player.app does not work. Video at 1024x768 only. This is the PC Best Buy sold for $150 on black friday.

HP Pavillion a1245c

Method: Native install, patched DVD with Maxxuss Anti-TPM

Hardware: AMD Athlon 64FX with SSE3,NX PAE 1GB DDR SDRAM, ATI X300 PCIe

Comments: USB sound only.

Sony Vaio RS-620G

Method: VMware install, patched DVD v1.0

Hardware: Pentium 4 Prescott mPGA-478 2.99GHz with SSE2, SSE3, no NX, PAE | 512MB RAM | Radeon 9200 | SoundMax integrated Audio

Comments: SoundMax card works after using the AppleAC97Audio.kext compiled for 10.4.3. The Radeon 9200 does not have QE or CI, therefore DVD Player.app does not work. Editing com.apple.boot.plist allows a max res of [email protected] (no widescreen). Everything works amazingly fast and well. Installation went quick and errorlessly in VMware, although I'm sure I could have installed natively.

IBM Thinkpad R40 (Type 2681) *KAL*

Method: Native install, patched DVD with Maxxuss DVD Patcher 1.1a

Hardware: 1.8GHz Pentium 4 M (3 year old model!) with SSE2 and PAE support but no NX, 512MB RAM, ATI "Mobility" 16MB onboard, AC97 SoundMax audio, Intel Pro 10/100 Ethernet built in.

Comments: Native install worked first time with default (SSE2 no NX) kernel. No QE or CI naturally, default res of 1024x768x32 is nice and clear and very bright. Onboard network seems to work in 10.4.3 which didn't seem to in .4.1. Audio is perfectly functional and clear on output and line-in and built in mic work as well. Trackpad and pointer both work fine as does USB 2.0 ports.

LifeBook S7010

Method: Native install, patched DVD with Maxxuss Anti-TPM

Hardware: P-M D 2.00GHz with SSE2, 2GB

Comments: Sound does not work. Video at 1024x768. Bluetooth works great, Broadcom 10/100/1000 wired card works. wifi ipw2200bg doesnt work,


HP/Compaq dx2000MT

Method: Native install, but had to swap the CD-RW for a DVD-ROM

Hardware: P4 2.80GHz, 512Mb

Comments: Still playing, installed with on board video set to 64Mb


HP ePC 42

Method: Native install on partition using dd and Deamoo's image

Hardware: Pentium 4 1.6Ghz, (SSE2 only) 20 Gb ATA hard disk, AC'97 BA/BAM intel intergrated audio, 256 Mb of RAM, ATI Rage 128 pro (QE and CI are not supported) CD-ROM ( :P )

Comments: Everything as far as I can tell works, Sound in particular is of very high quality, no extra drivers needed, However OS X86 absolutely refuses to boot if one of the partitions is Windows XP, but boots fine with Windows 2000 on one of the partitions.


IBM A50 Model 8175-PBP

Method: Native install on partition (10.4.3 8F1099 + Maxxuss DVD/ISO Patcher v1.1a )

Hardware: Pentium 4 3Ghz (HT + SSE3 + PAE only), 1G Ram , ATI RADEON 9200 , ATEN Firewire Card + ATA 40G harddisk (NOT SATA)

Comments: Install just like Windows XP even I use ext USB DVD-Rom, All things working but The Radeon 9200 does not have QE or CI (How to fix it ??). Skype Cannot work at all. Can play DVD with VLC but so slow

Powered by MediaWiki © 2021 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki   |   Privacy policy   |   About OSx86   |   Disclaimers