HCL 10.4.8
From OSx86
(Difference between revisions)
(→Processors) |
(→USB Devices) |
||
| Line 1,166: | Line 1,166: | ||
==USB Devices== | ==USB Devices== | ||
<table width="100%" border="1"> | <table width="100%" border="1"> | ||
| + | <tr> | ||
| + | <td>Dell Memory Key 128MB</td> | ||
| + | <td>USB</td> | ||
| + | <td>USB Memory Key Drive</td> | ||
| + | <td>Dell</td> | ||
| + | <td></td> | ||
| + | <td>Yes</td> | ||
| + | </tr> | ||
| + | |||
<tr> | <tr> | ||
<td>WIRE-CNL-BLUE-100M</td> | <td>WIRE-CNL-BLUE-100M</td> | ||
Revision as of 03:23, 17 December 2006
This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.
- ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
- Please add hardware into tables.
- This is for 10.4.8 builds only.
Contents |
Motherboards
For a comprehensive list of possible Intel chipsets: http://www.intel.com/support/chipsets/
- PLEASE INCLUDE THE SOUTH BRIDGE TOO
| 915P-A7Combo | Biostar | Intel 915P | Audio full supported without patching, Ethernet need patching, video full supported with Natit Driver (7300 GT) | JaS 10.4.8 DVD for Intel SSE3 |
| P4M800PRO-M Version 2.0 | ECS | Via P4M800Pro / VT8237R | LAN works with pinxues Viarhine.kext. Sound and USB 1.0 work natively, but installing patch on Jas 10.4.8 for USB 2.0 seems to break it. Only tried PATA, have no idea about SATA. Had some issues with root device not found error, but -f will boot. Sound doesn't work in safe mode. Geforce 6200 works with titan.kext QE and CI supported. | JaS 10.4.8 DVD for Intel SSE3 (reseed) |
| Ai7 | ABit | Intel 865PE/ICH5R) | Works: Everything. USB2 with USB developer patch, Lan 10/100, 1394, Realtek AC97 Audio I/O, SPDIF Out, MIC. SATA/PATA. ATI 9600XT QE/CI Callisto/AGPGart, OC Prescott 3.5GHz. S1 Sleep is OK | JaS 10.4.8 DVD for Intel SSE3 (reseed) Semthex 8.8.1 Beta 8 |
| IC7-G | ABit | Intel 875P (MCH) / 801ER (ICH5R) | Works: Everything. USB2 with USB developer patch - 261.4.2-Log, GigE Lan - Intel CSA, 1394, Realtek AC97 Audio, SATA/PATA. Minor Issues: S1 suspend only works when done manually from keyboard hook. | JaS 10.4.8 DVD for Intel SSE3 (reseed) |
| 775Dual-VSTA | ASRock | VIA PT880 Pro Ultra | Will not boot with private (original) seed, error "still waiting for boot device." Use reseed, make sure to check the VIA ULi SATA patch. Upon FIRST reboot, I installed Apple's latest USB patch, deleted extensions.mkext and extensions.kextcache, repaired disk permissions, THEN reboot. Otherwise, it will not boot again giving the "still waiting for boot device error." Network patched with Rhine II driver (pinxue). | No, patched on 10.4.8 (Semthex) reseed |
| 775i945GZ | ASRock | i945G | Manually updated from 10.4.6 to 10.4.8 Semthex Kernel Beta 5, everything works fine, sometimes it takes a few minutes to get graphics back on after sleep mode. Mind the BIOS-settings! | No patching needed |
| CONROE945G-DVI | ASRock | Intel 945G | Everything but sound & network jack worked out of the box. See JAS install instruction for enabling the sound and the network jack. Started at 10.4.6 and updated using the Kiki Combo Updater. Got an error after installing the updater, but all was working after the reboot. | Yes |
| ConRoeXFire-eSataII | ASRock | Intel 945P/ICH7R | Everything works, only needs patching the sound and installing network drivers. | No |
| A8N-VM CSM | ASUS | Nforce 430/6150 | Ethernet works with forcedeth-nock-fixed.zip; Video works with MacVidia, doesn't cube; USB must be enabled to full-speed in the bios; ACPI works for the most part... can't figure how to wake after sleep, but reboots fine; SATA works with via.sata patch, but is very buggy; Audio works 2 channel with HDaudio mods, AMD Athlon 4000+ | JaS 10.4.7 with 10.4.8 patch, needs patching |
| M2NPV-MX | ASUS AM2-socket | Nforce 430 | 10.4.8 with old and new kernels, LAN not working, onboard sound (ADI1986a) works with Azalia.kext and Natit.kext, on board VGA (NVidia) just one resolution (no QE/CI) | NO, Try 10.4.8 Tubgirl |
| P4C800-E | Asus | i875 (478) | All work (Semthex kern.), LAN, audio in/out, Sata, Graphics card x1600pro AGP work with NeoPheus patch | YES 10.4.8 DVD |
| P4S800 | ASUS | SiS648FX | Still waiting for root device, incompatible chipset | NO |
| P4P800 VM | ASUS | Intel 865G GMCH/ICH5 | Everything seems to works smoothly, SATA, network, USB. Audio works stereo, but output jack is mic in by default but but you can fix it by modifying the file: /System/Library/Extensions/AppleAC97Audio.kext
/Contents/PlugIns/AppleAC97CodecAD198x.kext
/Contents/Info.plist
With the 10.4.6 myz install disc + jaz 10.4.7 update: video with VESA 3.0 driver, no CI, no QE (no kext load, not even if editing the 830.kext). On Board Audio not listed in the System Profiler but working (very high latency, not good for multitracking). The computer is recognized as an ADP2,1 (development platform). |
Yes |
| P5B-E | ASUS | Northbridge Intel P965 / Southbridge Intel ICH8R |
Works: USB, Firewire, SATA Needs Patching: Sound, JMicron PATA controller, Doesn't work: Attasic L1 LAN |
JaS 10.4.8 DVD for Intel SSE3 (reseed) |
| P5B Deluxe WiFi | ASUS | Northbridge Intel P965 / Southbridge Intel ICH8R |
Works: USB, Firewire, SATA (ICH8R) Needs Patching: Sound (Line-out only), JMicron PATA controller, One Lan Port Doesn't work: 2nd lan port, WiFi |
JaS 10.4.8 DVD for Intel SSE3 (reseed) |
| P5B Deluxe | ASUS | Northbridge Intel P965 / Southbridge Intel ICH8R |
Works: USB, Firewire, SATA (ICH8R) Needs Patching: Sound (Line-out only), JMicron PATA controller, One Lan Port Doesn't work: 2nd lan port |
JaS 10.4.8 DVD for Intel SSE3 (reseed + 1st seed) |
| P5GV-MX | ASUS | Intel 915G | Everything work with 10.4.7 GMA900 patch | Yes |
| P5LD2 | ASUS | Intel 945P / ICH7R | Work: HD Audio (Realtek 882) only 2 channels working with some modifications (ALC882) you need to follow this guide http://forum.insanelymac.com/index.php?showtopic=18642. Network works with IONetworkFamily.kext from 10.4.4. Doesn't work: ALC882 line in, SATA Ports in RAID or AHCI mode, ITE8211 ATA Ports | JaS 10.4.8 SSE3 original seed (running on 200Mhz FSB) (10.4.7 + upgrade) as well as 10.4.8 SSE3 original seed reinstall, all with kernel semthex 8.8.1 |
| P5LD2-VM | ASUS | Intel 945G | Everything works perfect. Sound ALC882: line-in & line-out fully supported with new AppleHDA from Taruga :) | JaS 10.4.8 SSE3 reseed with kernel semthex 8.8.1 |
| P5LD2-VM DH | ASUS | Intel 945G / ICH7 (DH) | BIOS version:0602 Work: Everything work with 10.4.8 Jas install DVD/semthex kernel. HD Audio (Realtek 882) working with this guide (http://forum.insanelymac.com/index.php?showtopic=32859) (line out (2 channels), spdif (digital out), line in, mic in). Doesn't work: SATA Ports in RAID or AHCI mode, ITE8211 ATA Ports | Yes -sound needs patch |
| P5LD2-VM SE | ASUS | Intel 945G | Everything work with 10.4.8 Jas install DVD/mifki kernel (sata,network,gma950 all work straight out the box, NOTE this is the SE "no raid" board - sound requires modified appleHDA.kext gives line out, spdif (digital out), line in, mic in | Yes -sound needs patch |
| P5L-VM 1394 | ASUS | Intel 945G | Work: Everything works except for Attansic ethernet chip. HD Audio (Realtek 883) only 2 channels working with some modifications (ALC883) you need to follow this guide http://forum.insanelymac.com/index.php?showtopic=18642. Doesn't work: line in | JaS 10.4.8 SSE3 reseed with kernel mifki 8.8.1 |
| P5PE-VM | Asus | i865G (775) | Fully working except onboard LAN, which needs skge.kext | 10.4.8 DVD |
| P5V800-MX | ASUS | Northbridge VIA P4M800 / Southbridge VIA VT8251 | Works: Video VGA and network (Realtek PHY adapter in chipset) after installing ViaRhine driver Doesn't work: USB (used to work with previous releases), remaining Southbridge facilities: no sound, no SATA | JaS 10.4.8 DVD for Intel SSE3 (reseed) |
| P5WD2-Premium | ASUS | Northbridge Intel P955x / Southbridge Intel ICH7R |
Works: USB, Firewire, SATA Needs Patching: Sound, Doesn't work: Marvelle Lan, Of coarse Optical output or input of sound, reading of sensors other than on HD for temp | JaS 10.4.8 DVD for Intel SSE3 w/semthex |
| P5W DH Deluxe | ASUS | Intel 975X /ICH7R | Work: Everything works perfect. HD Audio (Realtek 882) only 2 channels working with some modifications (ALC882). Line in shows up using Taruga's AppleHDA.kext Doesn't work: Wireless + Remote. HD Audio disable on first boot and turn it back on after. | Jas install DVD 10.4.8 SSE 3 see http://forum.insanelymac.com/index.php?showtopic=32859&hl=alc882 Installed ALC882_AppleHDA_v0.4b.mpkg.zip ( |
| P5W DH Deluxe | ASUS | Intel 975X /ICH7R | Everything works, except sleep. Out of the box I didn't got sound and NIC, but replaced the AppleNetworkingFamily kext with a 10.4.7 version. Audio works with 2 channels and mic + headphones (front) and line-in. | Used Jas install DVD 10.4.8 SSE3 + Semthex 8.8.1 Beta 8 |
| A8N-SLI Deluxe | ASUS | Nvidia nForce4 SLI | All works, except nForce4 LAN (requires forcedeath driver), SATA not tested. | Yes, MacOSX_10.4.8DVD_AMD_SSE3_TEST_1 |
| T-Force 965PT | Biostar | Intel 965 | Everything Works W/ Minor Editing | No, JaS 10.4.8 DVD |
| SLI-DR Expert | DFI | NForce 4 Ultra | IDE and SATA Working, Audio Unknown, Marvell LAN Works, Nvidia Ethernet works, USB Devices must be unplugged then plugged back in at boot. | Jas install DVD AMD 10.4.8 SSE 3 TEST 1 |
| 865PE-A | ECS | Intel 865PE | Audio working (only line out and mic tested), usb working, onboard network working, IDE working, sata untested | Almost,R8139 kext from JaS 10.4.7 DVD for network |
| 6100K8MA-RS / Acer FC51GM | Foxconn | nForce 410/430 | Audio working 2.0 mode, 5.1 is bugged. IDE works fine, SATA can be activated but will cause crash. onboard GeForce 6100 untested. Onboard Ethernet does not work | as described in note, using 10.4.8 AMD SSE3 test1 DVD |
| GA-8VT880P Combo | GIGABYTE | VIA PT880P | Everything seems to work (LAN, USB, SATA *fix http://osx86brasil.zip.net/, IDE, Audio (USB working with http://developer.apple.com/hardwaredrivers/download/usbdebug.html) use v 256.4.2* | Yes JaS Update 10.4.8 |
| GA-8I945GZME-RH | Gigabyte | Intel 945/ICH 7 | Semthex Kernel: SATA,ATA,USB work, GMA950 grapihc chip works with QE/CI supported! 2 channel Audio works after applying this hack Fixed, just change 882 to 883. LAN works after recompiling skge driver8001 kext | JaS 10.4.8 Install with Semthex Kernel then upgraded to latest Semthex Nebukadnezar Kernel |
| GA-8I945GMF | Gigabyte | Intel 945/ICH 7 | SATA 2, ATA, USB 2.0, Fireware , Video GMA950 works with Quartz Extreme and OpenGL, (Line In / Line Out / MIC In / SPDF Audio works after applying this hack [1] ONLY Kernel 8.8.1), LAN works | JaS 10.4.8 Kernel 8.8.1 |
| GA-M55SLI-S4 | GIGABYTE | NForce 4 (AM2) | audio works (no s/pdif tho), onboard network does not work(although I havn't tried to add any drivers), sata untested, usb working | Yes JaS Update 10.4.8 AMD SSE3 only |
| GA-965P-DS3 | GIGABYTE | Intel 965P | Everything works, more information here: http://forum.insanelymac.com/index.php?showtopic=28439&st=0
|
JaS 10.4.8 DVD reseed + pion's package http://tinyurl.com/yj4dr8 |
| GA-965P-DS3 | GIGABYTE | Intel 965P | Everything works, more information here: http://forum.insanelymac.com/index.php?showtopic=28439&st=0 | JaS 10.4.8 DVD reseed + pion's package http://tinyurl.com/yj4dr8 |
| GA-965P-DS4 | GIGABYTE | Intel 965P | Everything works, CPU:Intel Core 2 duo 6300; Graphics:PowerColor X1600 PRO; Display:DELL 2007WFP Harddisk:WDC800JD-75MSA1;DVD-ROM:PIONEER DVD-127P:MERMORY:A-DATA Vitesta DDR2-800...more information here: [[2]], MSN:[email protected] | JaS 10.4.8 DVD reseed[[3]]+OSX 10.4.8 Jmicron JMB IDE patch[[4]] + AppleHDA Solution(ALC833):[[5]] + pion's package [[6]] |
| GA-K8NXP-9 | GIGABYTE | nForce4 Ultra | IDE, SATA nForce4, USB, Firewire, Audio stereo, W-LAN PCI card work. Reboot doesn't work. Not tested: SATA Silicon | 10.4.8 AMD DVD SSE3 (Semthex kernel) |
| D865GSA | Intel | 865G | Everything seems to works smoothly (Semthex Kern). Works: LAN(10.4.7 - Realtek8139), USB, Graphics(1280x1024 No QE/CI), Audio (10.4.7 - AC97) | JaS 10.4.8 DVD reseed |
| D865GSA | Intel | 865G | Worked first run (Celeron D 326, 533 FSB) with JaS 10.4.7, USB, LAN (no DHCP), USB, audio, onboard video VESA 3.0 [email protected] Updated with Apple 10.4.8 combo update + Mifki 8.8.1 kernel, added GeForce FX 5200 AGP and Titan.kext for QE and CI. Took several days to get the right mix but now it's totally stable and Mac-like. Have NOT tested: Audio-in, SATA. I would not recommend this board but for price. | JaS 10.4.7 + Apple 10.4.8 Combo + Mifki 8.8.1 kernel + pion's package + Titan.kext (for addon GeForce 5200). |
| D915GEV | Intel | 915G | Works: LAN, USB, Graphics, No work: Audio In/Out, Audio was working with 10.4.6 | JaS 10.4.8 DVD reseed |
| D945GNT | Intel | 945G | Works: LAN, USB, Graphics, Audio (Sigmatel 9223) from http://forum.insanelymac.com/index.php?s=&showtopic=15817&view=findpost&p=105653 | JaS 10.4.8 DVD reseed |
| D945GNTLKR | Intel | 945G | Works flawless: SATA2, HDA, QE & CI (on GMA950), Gbit Ethernet. Have checked "Sigmatel.9220 patch" in installer. "Line In" & "Audio Out" swapped. FireWire 400 is detected, but not tested, should work too. | JaS 10.4.8 DVD, mifki kernel |
| D946GSZIS | Intel | 945GZ | install with "platform=x86pc -v -f", sata and ata both working, usb working, no audio, built-in Ethernet shows in system profile, but grayed out in system preferences. | mifki kernel |
| D945PVS | Intel | 945P | audio works , onboard network work, sata work, usb working | mifki kernel |
| G945GTP | Intel | G945 | Audio working (only line out and mic tested), usb working, onboard network no work, sata OK | Yes JaS Update 10.4.8 |
| P5WDG2-WS | Intel | 975x | Audio working but it is scratchy, follow the http://forum.insanelymac.com/index.php?showtopic=18642 guide, could not get Marvell ethernet drivers to work but I've read that other people have successfully used it in previous builds. | Yes JaS Update 10.4.8 |
| D101GGC | Intel | ATI x200/ SB450 | Cannot install by booting of the DVD, you must instal the packages over an existing Install, the only thing that doesnt work is LAN, I have not tested SATA | No |
| 915GM-FR | MSI | Intel 915/VIA 6 | Needs 10.4.3 IONetworking kext, and AppleAudioAzalia kexts needs permissions repaired, and Jas Intell 900 GMA kext, Every then works great | JaS 10.4.8 DVD for Intel SSE3 (reseed) |
| nF4 Ultra-D | DFI | nForce 4 | Marvell ethernet works, nVidia ethernet works after playing with kexts, audio OK (No surround sound?), USB OK, firewire unknown, SATA corrupts occasionally. USB devices must be unplugged and replugged to work (Edit: Not after overclocking!) | 1048_AMD_SSE3 |
Processors
| Manufacturer | Model | Notes | Recognized as | Full Work / No Patch |
|---|---|---|---|---|
| AMD | Opteron 165 | kernel_task at 100+% until overclocked | 1.75Ghz Dual Core Opteron | Yes |
| AMD | Athlon 64 3800+ Venice | Works Perfectly, SSE3 recognized, Sleep works along with Restart | 2.4 GHz Athlon 64 (Correct) | Yes |
| Intel | Pentium D 820 | Works perfectly with semthex patch beta8 Jas 10.4.8 | 2,8 GHz Unknown | YES,semthex patch |
| Intel | Celeron D 315 Prescott | Works absolutely flawlessly. JaS 10.4.6 -> Apple's 10.4.8, using Semthex 8.8.1 kernel. Everything works perfectly, it even goes to sleep! (Sadly this doesn't control the fans or the lights on my case, so there's no real point. It's still cool! | 2.26GHz Unknown | Yes! Strait out of the box! |
| Intel | Celeron D346 | Need to change FSB. Look here http://macgeek.freeflux.net/blog/archive/2006/10/26/new-kernel-with-fsb-boot-option-by-mifki.html | 4GHz Intel Celeron CPU | Yes! SSE3, NX is OK |
Graphics Cards
Please specify if your card is AGP, PCI or PCI-E.
Also, place chip and board manufacturer in their respective column.
Note: For NVidia users, visit http://macvidia.starchaser.org/ for updated drivers. For NVIDIA CARDS PLEASE SPECIFY IF THE CARD DOES QE/CI. Saying the macvidia drivers work but not specifying QE or CI is a bit misleading
If you are using the new kernel then download the Titan kext from http://omni.starchaser.org/titan to get QE/CI support
Note: For ATI users, visit http://omni.starchaser.org/ for experimental drivers.
Note: As of right now, all ATI cards with working kexts have severe slowdown issues with nForce3 chipsets. There is no fix for this, save getting editting out your card from the kext or using Quartz Debug to shut off Quartz Extreme. Edit: Just use agpgart to get no slowdowns at all on nForce3. Joblo10
PCIe
| Hardware Name,(VRAM) | Bus | Chip-Manufacturer / Board-Manufacturer | Notes | QE / CI | Resolution | Full Work / No Patch |
|---|---|---|---|---|---|---|
| Geforce 7800GTX 256MB | PCI-E | BFG | Using the NV40 thing that came in the installer | Both | ALL | Yes/Requires NV40 thing |
| Geforce 7600GS 256mb | PCI-E | XFX | Using Titan 1.0 | Both | ALL | Yes/No |
| Geforce 7300GS 128mb | PCI-E | Chaintech | Working properly using titan.kext! Natit.kext causes screen flip. | Both | All | Yes, Req, Titan.kext |
| EN7300GTS(256) | PCI-E | ASUS | Using Natit 1.0 | Both | ALL | Yes/No |
| TripleHead2Go | ??? | Matrox | JaS 10.4.8 DVD reseed + titan.kext | Both Yes | 640x170 / 3840x1024 | Yes / Req Titan.kext |
| 7600 GS (256MB) | PCI-X | Manli | JaS 10.4.7 DVD + Apple 10.4.8 update + natit.kext | Both | All(monitor max. 1680x1050) | natit |
| GeForce 7900GT KO | PCIe | eVGA | Works using MacOSX 10.4.8DVD AMD SSE3 TEST 1. DVI with full QE/CI and resolution change. Use Titan NV40.kext option during install. | Yes | All resolutions | Yes |
| 7600 GS (256MB) | PCI-X | NVidia/Gigabyte | Used JaS 10.4.8 DVD+titan.kext (Device ID 0x0392) | QE and CI | from 640x480 to 1440x900 | Yes, only installed titan |
| EN7300GS(256) | PCI-E | ASUS | Using Nanit | Both | ALL | Yes/No |
| Geforce 7300 GT (256MB) | PCIe | ASUS | Works using Titan Kext or Natit. Both VGA and DVI. Full QE/CI | Yes | Any | titan 11-01 or Natit 1.0. |
| Geforce 7300 LE (256MB) | PCIe | Sparkle | Works using Natit 1.0. VGA, S-Video & DVI (Not Yet Tested), Full QE/CI | Yes | Any | Natit 1.0 |
| Geforce 7300 LE (256MB) | PCIe | MSI | Works using MacOSX 10.4.8DVD AMD SSE3 TEST 1. DVI with full QE/CI and resolution change. Use Titan NV40.kext option during install | Yes | Any | Titan |
| GeForce 7600 GT PCI-E(256Mb) | PCIe | Gigabyte [Silent-pipe version] | VGA works fine with Dell 2007wfp, DVI fails with blinking/res change error, needs correct EDID I think | Yes | All resolutions | Titan 04/11 |
| GeForce 7600 GT | PCIe | MSI | Works using Titan. DVI with full QE/CI and resolution change. | Yes | All resolutions | Titan |
| GeForce 7600 GT | PCIe | Gigabyte | Works using Titan. DVI with full QE/CI and resolution change. | Yes | All resolutions | Titan |
| GeForce 7900GS | PCIe | PixelView | Works using Titan. DVI with full QE/CI and resolution change. | Yes | All resolutions | Titan |
| GeForce 6800GT | PCIe | ASUS | Works using MacOSX 10.4.8DVD AMD SSE3 TEST 1. DVI with full QE/CI and resolution change. | Yes | All resolutions | Yes |
| X1600Pro IceQ(256MB) | PCIE | HIS Excalibur | FULLY working card after using Borisbadenov Patch. QE/CI, DVI, SLEEP, ROTATE etc. All working smoothly. | Yes | Any | Yes with Neopheus 3.5 Borisbad installer |
| X1800GTO(256MB) | PCIe | ATI/GeCube | FULLY working with Natit Patch. QE/CI, OpenGL, DVI, ROTATE, Dual Monitor. All working smoothly. also work with ATIX1xxx Installer(http://www.installers.dl.am/) | Yes | Any | No, Natit or ATIX1xxx Installer |
| Intel I915 | PCIE | Intel | Works | Both | from 640x480 to 1650x1050 | Works out of the box |
| GeForce 7800GTX(256Mb) | PCIe | Leadtech | DVI Works like a champ at [email protected] Thats the highest this monitor will go | Yes | All resolutions | Titan 04/11 |
| GeForce 7600 GT(256Mb) | PCIe | Manli Captiva | Works using Titan Kext. DVI works full QE/CI | Yes | Any | Borisb installer for Nvidia (Titan) 10.4.8 |
| Radeon X1600 Pro 256MB (Device ID 0x71C2) | PCIE | MSI Microstar Inc. | FULLY working card after using Borisbadenov Patch. QE/CI, DVI, SLEEP, ROTATE etc. All working smoothly. | Yes | Any | Yes with Neopheus 3.5 Borisbad installer |
| NVIDIA Quadro FX540 128 MB | PCIe | NVIDIA | Works using Titan Kext. VGA works DVI not tested. Full QE/CI/OpenGL | Yes | Any | titan 11-02 |
| NVIDIA GeForce Go 7800 256MB | PCIe | NVIDIA / DELL | Works with Darwin 8.8.1 kernel (mifki), Apple's NVIDIA kexts and omni's Titan kext. QE/Q2DE/CI supported. | Yes | Any | titan 11-02 |
| NVIDIA GeForce 7600GT 256MB | PCIe | NVIDIA | Works with Darwin 8.8.1 kernel (Semthex), Apple's NVIDIA kexts and omni's Titan kext. QE/Q2DE/CI supported. | Yes | Any all the way upto and including 2560x1600 | titan 11-02 |
| NVIDIA GeForce 7300 GS PCI-E 256Mb | PCIe | PNY | Works using Titan and Natit Kext. VGA works full QE/CI. DVI not tested, though it should work. | Yes | Any | 10.4.8 Real w/Titan 11-04 |
| Radeon X1600pro 256 MB (Device ID 0x71C2) | PCIE | Powercolor | Works using Neopheus 3.5 Borisbad installer. No Energy Saver functions. | Yes | Any | Yes with Borisbad 3.5 |
| Radeon X1600pro 256 MB (Device ID 0x71C2) | PCIE | Powercolor | Works using Neopheus 3.5 Borisbad installer. No Energy Saver functions. | Yes | Any | Yes with Borisbad 3.5 |
| Radeon X1600XT 256MB dual DVI-D | PCIe | PowerColor | Borisbadenov's Method v. 3.6 (http://installers.dl.am/) yields the ability to change resolutions, but it does not enable QE/CI or rotation support under this kernel. After determining that QE/CI were unsupported, I did not further test the card. | Yes | Any | No |
| Radeon X850XT (Device ID 0x5D52) | PCIE | Sapphire | Callisto 008beta on 10.4.8 (New kernel untested). DVI-Out does not work. Koverg patch reportedly working for QE/CI (untested). | Untested | Fully supported (Including widescreen). | No, Callisto 008 & Koverg patch. |
| Geforce 6600 256 MB | PCIe | XFX | Works using Titan Kext. DVI works full QE/CI | Yes | Any | titan 11-01 |
| PNY Geforce 6600GT 128MB Dual DVI | PCIe | PNY | Works perfectly using Titan Kext. DVI works full QE/CI | Yes, Full QE/CI | Any | titan 11-01 |
| Geforce 6200 TurboCache | PCIe | XFX/Inno3d/AOpen | Works using Titan Kext or Natit Installer 1.0. DVI works and QE & CI. No screen artifacts! Works perfectly | Yes | Any | Install Natit! Done! |
| GeForce 7800GT | PCIe | nVidia/Gigabyte | Works perfectly | QE/CI | Any | Natit |
| Intel 915GL | PCIe | Intel | Native OpenGL apps work fine. PPC OpenGL apps crash, but other PPC apps work fine. | Yes | Many | No |
| Radeon x1300 Pro | PCIe | ATI | VESA 3. QE. CI Enabled after install. For resolution change, you need to download http://installers.dl.am - BorisBadenov/NeoPheus 3.6 | Yes | Any | Yes |
| Geforce 6500 256bit(256MB) | PCIe | Nvidia | Using 10.4.8, latest semthex kernel, Titan.kext enables CI/QE. Everything working! | Yes | Any | Titan works, Natit installer produces black screen |
AGP
| Hardware Name,(VRAM) | Bus | Chip-Manufacturer / Board-Manufacturer | Notes | QE / CI | Resolution | Full Work / No Patch |
|---|---|---|---|---|---|---|
| Geforce 7600GT (256MB) | AGP | XFX | Had to edit the NVDAResman and NV40HAL with my own device ID(0x02e0), only annoying thing is the dashboard crash when using it | Yes, both | Any | Titan or Natit |
| Geforce 6800 (128MB) | AGP | Leadtek | Works perfektly using OSX 10.4.8_AMD_SSE3 from Piratebay after adding 0x004110de in IOPCIMatch in the Geforce.kext(Contents/Info.plist) and deleting AGPGuard.kext | Yes, both | Any | Titan |
| Geforce 6800GT (256MB) | AGP | ASUS | Works using Titan Kext. Both VGA and DVI. Full QE/CI | Yes, both | Any | titan 11-01 |
| GeForce FX 5200 | AGP | Unbranded | Works using Titan. All resolutions, widescreen, CI/QE/GL. | Yes | All resolutions | Titan |
| Geforce 6200 TurboCache | AGP | XFX/Inno3d | Works using Titan Kext and Natit Installer 1.0. DVI works and QE & CI. no screen artifacts! | Yes, both | Any | No |
| Geforce 5900XT (128MB) | AGP | MSI | Natit Installer 1.0. DVI works and QE & CI. no screen artifacts | Yes, both | Any | No |
| Geforce 6600GT (128MB) | AGP | Apollo | Titan Kext DVI works and QE & CI. no screen artifacts, smooth as silk | Yes, both | Any | No |
| Geforce 5200 (128MB) | AGP | XFX/Inno3d | Works using Titan Kext and Natit Installer 1.0. DVI works and QE & CI. no screen artifacts! (Device ID 0x0322) | Yes, both | Any | No |
| Radeon X1600 (256MB) | AGP | Sapphire | Works using borisbad installer. No Energy Saver functions. However, if you use a VGA>DVI adapter, display may go to sleep. (Device ID 0x71C2) | Yes plus Q2D capable (gives a speed boost on Finder) | Any | No |
| Radeon X800Pro (256MB) | AGP | ATI | Callisto 008beta with 10.4.8 DVD Disk (Device ID 0x4a49) | QE and CI, YES | from 640x480 to 1650x1050 | Yes |
| Radeon 9800 Pro (128MB) | AGP | ATI | Callisto 008beta with JAS 10.4.8 Intel SSE2 Patch. DVI OK. Mouse tearing partially elimiated with Mouse Locator. Tested OpenGL with WoW, performace is soso, after return to desktop the cursor flickers and had to reboot. | Both | Any (Using 1280x1024 on 17" LCD) | No |
| NVIDIA FX5700LE (256mb) | AGP 4/8x | BFG Tech | I was able to install the Titan kext while I was booted into the Install CD, so I got the cool Cube effect of the setup assistant! A tiny bit of lag while the card starts up again after not doing any QE/CI in a while, (Dragging something into Dashboard doesn't ripple the first time, but all times after that for like 10 minutes, unless you don't let it power down.) | Both | All that I can see, using 1280x1024 on my CRT, absolutely stunning. | Titan activates about 90% of the card. |
PCI
| Hardware Name,(VRAM) | Bus | Chip-Manufacturer / Board-Manufacturer | Notes | QE / CI | Resolution | Full Work / No Patch |
|---|---|---|---|---|---|---|
| NVIDIA FX5200 (128MB) | PCI (not PCIe) | NVDIA | Used Titan KEXT in 10.4.8, rebooted, no issues whatsoever. Full QE/CI, resolution changing, and allows calibration. | Both | Any (Using 1280x1024 on 17" LCD) | Yes, with TITAN kext |
Network Cards - Wired (Ethernet)
| Hardware Name | Manufacturer | Notes | Fully working without patching |
|---|---|---|---|
| DFE-538TX, Device ID 0x1300 | D-Link, Vendor ID 0x1186 | Works without problems | Yes |
| Realtek 8139 PCI Card | Realtek 8139 | Works but you must find an earlier build of the AppleRTL8139Ethernet.kext because the one on the Jas 10.4.8 DVD does not work. | No |
| Netgear GA311 | Realtek 8169 | Works fine with the 10.4.6 IONetworkingFamily.kext. I had to manually set to 1000Base-T to get DHCP-adresse for the first time, afterwards everything went O.K. Gigabit-Speed is working. | Needs old IONetworkingFamily.kext |
| Marvell Yukon | Marvell Yukon | Works without problems | Yes, requires forcedeth.kext |
| Intel Pro/100 | Intel | Works without problems | Yes |
| Netgear FA311 | Realtek/Netgear | Works perfectly, shows up at on-board | Yes |
Network Cards - Wireless
| Interface | Standard | Device | Manufacturer | Notes | Fully working without patching |
|---|---|---|---|---|---|
| PCI | B/G | WL-138G v2 | ASUS | v2 only! Works as Airport Extreme, add DeviceID 4318 needed. | No |
| PCI | B/G | WPCI810G | Motorola | Works as Airport Extreme. You need to read the forums> (Doesn't works.Nothing show in network(Intel D945GTP Board).) | No |
| Mini PCI | B/G | BCM4311 | Broadcom | Works as Airport Extreme | Yes |
| PCI | B/G | WMP54g | Linksys | Used Ralink Drivers. [http://www.ralinktech.com/drivers/Mac/RTCardBus%20D60-1.0.9.0%20D61-1.0.2.0%20UI-1.2.8.0_2006_08_31.dmg. (Not for Intel D945GTP Board.Keeping the internet On & OFF all the time, consider this is no works on this board)(WMP54G v4.1 does not work. only v4 works.) | No |
| PCI | B/G | W-Lan PCI Card | Gigabyte | Works fine with Ralink drivers. | No |
| USB | B/G | WUSBF54G | Linksys | ZyDAS ZD1211 Driver, need to edit kexts www.atheros.com/RD/ZyDAS/web_driver/ZD1211B/Macintosh/ZDA211MacUSB_install_4_5_7_0.dmg | No |
| USB | B/G | F5D7050 v4000 | Belkin | ZyDAS chipset. Not recognized as Airport www.atheros.com/RD/ZyDAS/web_driver/ZD1211B/Macintosh/ZDA211MacUSB_install_4_5_7_0.dmg | Yes |
| PCI | B/G | TEW-443PI | Trendnet | Atheros chipset. Recognized as Airport, support from 10.4.5 IO80211Family.kext, installed with Pacifist | No |
Other Expansion Hardware
| Hardware Name | Interface | Device | Manufacturer | Notes | Fully working without patching |
|---|---|---|---|---|---|
| ARC-11xx/12xx | PCIe/PCI-X | SATAII-RAID-Controller | Areca | UB Beta drivers at Areca FTP. Kernel Panic at boot - boots but unstable with inofficial drivers from areca support. | No, unstable. |
| RocketRAID 2320 | PCIe x4 | SATAII-RAID-Controller | Highpoint Technology | Get Mac Pro drivers from hpt website. Booting works, albeit slow. | Yes |
| Dlink PCI USB2 | PCI | Nec USB2 controller | Dlink / Nec | PCI card is not listed but USB ports works fine as High Speed USB (USB2) native support for nec controller in OS X | Yes |
USB Devices
| Dell Memory Key 128MB | USB | USB Memory Key Drive | Dell | Yes | |
| WIRE-CNL-BLUE-100M | USB | USB Bluetooth Adapter | Connectland | Yes | |
| Apple USB Keyboard | USB | Keyboard | Apple | Yes | |
| DBT-122 | USB | USB-Bluetooth adapter (1.1, 1.2) | D-Link | Doesn't support Headset profile in OSX | Yes |
| Mobile Phone | USB | V3 | Motorola | Works using iSync | Yes |
| Logitech MX RevolutionMouse | USB | Laser Mouse | Logitech | use lcc221.dmg from logitech website for full support | Yes |
| Logitech G5 Mouse | USB | ||||
| Logitech MX1000 Laser Mouse | USB | Laser Mouse | Logitech | ||
| iRiver Ihp140 mp3 player | USB | mp3 player | iRiver | Natively Works | Yes |
| Logitech DiNovo Cordless Desktop | USB | RF Keyboard | Logitech | Natively works including suspend/media/volume/etc. keys | Yes |
| Logitech USB Music Anywhere | USB | Wireless Bluetooth Headphones | Logitech | Natively works, just select in System Preferences>Sound>Output | Yes |
| Billionton BT 1.0 USB Dongle | USB | USB Dongle | Billionton | Natively works | Yes |
| Microsoft Wireless Desktop Elite | USB | Keyboard & Mouse | Microsoft | Natively works | Yes |
| Soundblaster Audigy 2 NX | USB 2.0 | USB external box | Creative | Stereo signal recieved but audio is choppy, using Sounblaster USB drivers | No - will investigate (could be a usb speed issue) |
