Editing HCL 10.4.9

Jump to: navigation, search

Warning: You are not logged in.

Your IP address will be recorded in this page's edit history.
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 510: Line 510:
 
!Full Work / No Patch
 
!Full Work / No Patch
 
|-
 
|-
|Place Holder
+
|X1600Pro IceQ(256MB)
|Place Holder
+
|HIS Excalibur
|Place Holder
+
|FULLY working card after using Borisbadenov Patch. QE/CI, DVI, SLEEP, ROTATE etc. All working smoothly.
#Place Holder
+
|Yes
|Place Holder
+
|Any
|Place Holder
+
|Yes with Neopheus 3.5 Borisbad installer
|Place Holder
+
|-
 +
|X1800GTO(256MB)
 +
|ATI/GeCube
 +
|FULLY working with Natit Patch. QE/CI, OpenGL, DVI, ROTATE, Dual Monitor. All working smoothly. also work with ATIX1xxx [http://www.installers.dl.am/ Installer]
 +
|Yes
 +
|Any
 +
|No, Natit or ATIX1xxx Installer
 +
|-
 +
|HIS x1900XT(256MB)
 +
|ATI/HIS
 +
|FULLY working with JCCOOL x19xx driver. QE/CI, OpenGL, DVI and analog, ROTATE, Dual Monitor. All working 100%. Games are fast - well over 100 FPS.
 +
|Yes
 +
|Any
 +
|Yes using JCCOOL x19xx Installer
 +
|-
 +
|Gigabyte X1650 Pro SILENTPIPE II, PCIe, 256MB, 2xDVI, TV-OUT
 +
|ATI
 +
|Only one DVI works, the other one works with DVI to VGA adapter.
 +
|Yes
 +
|ANY
 +
|Yes
 +
|-
 +
|Radeon X1600 Pro 256MB (Device ID 0x71C2)
 +
|MSI Microstar Inc.
 +
|FULLY working card after using Borisbadenov Patch. QE/CI, DVI, SLEEP, ROTATE etc. All working smoothly.
 +
|Yes
 +
|Any
 +
|Yes with Neopheus 3.5 Borisbad installer
 +
|-
 +
|Sapphire X1950XT 256MB
 +
|ATi/Sapphire
 +
|QE/CI/Rotation working. See [http://forum.insanelymac.com/index.php?showtopic=37175 Jccool Method]
 +
|Yes
 +
|Any res your monitor can do with dual dvi
 +
|No, Jccool Method
 +
|-
 +
|Sapphire X1950pro 256MB
 +
|ATi/Sapphire
 +
|no way for now...(25-01-07) :(
 +
|ko
 +
|ko
 +
|ko
 +
|-
 +
|MSI X1950XTX 512MB
 +
|ATi/MSI
 +
|QE/CI/Rotation working
 +
|Yes
 +
|Any res
 +
|titan (more to come)
 +
|-
 +
|Radeon X1600pro 256 MB (Device ID 0x71C2)
 +
|Powercolor
 +
|Works using Neopheus 3.5 Borisbad installer. No Energy Saver functions.
 +
|Yes
 +
|Any
 +
|Yes with Borisbad 3.5
 +
|-
 +
|Radeon X1600pro 256 MB (Device ID 0x71C2)
 +
|Powercolor
 +
|Works using Neopheus 3.5 Borisbad installer. No Energy Saver functions.
 +
|Yes
 +
|Any
 +
|Yes with Borisbad 3.5
 +
|-
 +
|Radeon X1600XT 256MB dual DVI-D
 +
|PowerColor
 +
|[http://installers.dl.am/ Borisbadenov's Method v. 3.6] yields the ability to change resolutions, but it does not enable QE/CI or rotation support under this kernel. After determining that QE/CI were unsupported, I did not further test the card.
 +
|Yes
 +
|Any
 +
|No
 +
|-
 +
|Radeon X1600 Pro 256 Mb Silent-Pipe II (GV-RX16P256DE-RH)
 +
|Gigabyte
 +
|Works using Neopheus patch bundled in 10.4.8 JaS release. QE/CI, DVI work. (incompatible with gigabyte GA-965P-DQ6 mobo)
 +
|Yes
 +
|Any
 +
|Yes with Borisbad 3.5
 +
|-
 +
|Radeon X1650 Pro SILENTPIPE II, PCIe, 256MB, 2xDVI, TV-OUT
 +
|Gigabyte
 +
|Only one DVI works, the other one works with DVI to VGA adapter.
 +
|Yes
 +
|ANY
 +
|Yes
 +
|-
 +
|Radeon X850XT (Device ID 0x5D52)
 +
|Sapphire
 +
|Use [http://forum.insanelymac.com/index.php?showtopic=21182 this] with Callisto b005.
 +
|Tested - AMD 10.4.8 SSE3
 +
|Fully supported (Including widescreen).
 +
|No, Callisto 005 & Koverg patch (may work, but tested with manually editing hex)
 +
|-
 +
|Radeon x1300 Pro
 +
|ATI
 +
|VESA 3. QE. CI Enabled after install. For resolution change, you need to download - [http://installers.dl.am BorisBadenov/NeoPheus 3.6]
 +
|Yes
 +
|Any
 +
|Yes
 +
|-
 +
|ATI Radeon X600 256mb
 +
|ATI
 +
|Using JaS 10.4.8 DVD works 1024x768 only out of box. Can get full resolution/refresh rate control panel with Callisto drivers, but must edit ATIRadeon9700GA.plugin (replace IONDRVFramebuffer by CallistoFB) to get QE/CI working.
 +
|Yes
 +
|ANY (tested with 1680x1050, and some 5 others on DIV port)
 +
|Titan works, Natit not tested.
 +
|-
 +
|ATI Radeon x1300(GV-RX13128D-RH)
 +
|ATI/Gigabyte
 +
|VESA 3. QE,CI works without patching or something else. DVI works perfect. (JaS.10.4.8.AMD.Intel.SSE2.SSE3+ppf1.iso)
 +
|Yes
 +
|not tested
 +
|No patch needed
 
|}
 
|}
  

Please note that all contributions to OSx86 may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see OSx86:Copyrights for details). Do not submit copyrighted work without permission!

Cancel | Editing help (opens in new window)

Templates used on this page:

Powered by MediaWiki © 2021 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki   |   Privacy policy   |   About OSx86   |   Disclaimers