Editing HCL 10.4.9

Jump to: navigation, search

Warning: You are not logged in.

Your IP address will be recorded in this page's edit history.
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 1: Line 1:
{{Hardware_Components|10.4.9}}
+
This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.
 +
 
 +
* ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
 +
* Please add hardware into tables.
 +
* This is for 10.4.9 builds only.
  
 
==Motherboards==
 
==Motherboards==
Line 10: Line 14:
 
====Abit====
 
====Abit====
 
{| class="wikitable" width="100%"
 
{| class="wikitable" width="100%"
 +
!Hardware Name (socket type)
 +
!Chipset
 +
!Notes
 +
!Fully working without patching
 
|-
 
|-
|[http://www2.abit.com.tw/page/de/motherboard/motherboard_detail.php?pMODEL_NAME=NF-M2+nView&fMTYPE=Socket+AM2 NF-M2 nView]
+
|Place holder
|Nvidia nForce 4300
+
|Place holder
|
+
|Place holder
*Onboard Ethernet (Realtek RTL8111B) - Does not work
+
*Place holder
*Onboard Sound (Realtek ALC883) - Works
+
|Place holder
*Onboard GeForce 6150 - Does not work (only VESA, not Natit or Titan)
+
|}
*SATA - Not tested
+
*PATA - Works
+
|Yes, Uphuck 1.2 and 1.3 with sound driver
+
|-
+
|[http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NAME=LG-95&fMTYPE=LGA775&pPRODINFO=Specifications&fSEARCHTEXT=LG-95 LG-95]
+
|Intel 945GC + ICH7
+
|
+
* BIOS version: 14
+
* Installation method: uphuck 10.4.9
+
* Audio (ALC 883): 2ch only so far. Works with Azalia driver from installer.
+
* Video (GMA 950): Not tested, used with Geforce 7600GS
+
* IDE and SATA: Works out of the box
+
* ACPI: Restart & Shutdown works fine so far.
+
* PROs: Very cheap and compatible.
+
* CONs: NOT an overclocker motherboard, FSB is locked in the Bios.
+
|Yes, uphuck
+
||-
+
 
+
  
 
+
====AsRock====
|} . .
+
 
+
====As-Rock====
+
 
{| class="wikitable" width="100%"
 
{| class="wikitable" width="100%"
 
!Hardware Name (socket type)
 
!Hardware Name (socket type)
Line 46: Line 33:
 
!Fully working without patching
 
!Fully working without patching
 
|-
 
|-
|ASROCK Conroe 1333-D667 (socket 775)
+
|Place holder
|945G/ICH7
+
|Place holder
|2.33GHz Core2Duo
+
|Place holder
Installed JAS 10.4.6, then upgraded to 10.4.10 with Mac.Nub
+
*Place holder
I've Been running this system rock solid at least 6 months with no glitches!
+
|Place holder
Also, I understand that upgrading the BIOS past v1.3 will make it not work.  Anyone had any luck with the newest BIOS v1.6?  I want to get a wolfdale chip which isn't supported prior to BIOS rev 1.6.
+
|}
Also, I'm using a PNY 7300GT 256MB working full QE/CI/OpenGL with mac.nub's 256MB inject driver on the 10.4.10 disc.
+
|*No.  But everything works if you apply Mac.nub's GMA950 and R1000 drivers from the 10.4.10 disc during install, so YES, sort-of.
+
Am booting with an IDE drive.  Haven't gotten SATA working native bootable, but it sees all drives attached.
+
|} . . .
+
  
 
====Asus====
 
====Asus====
Line 64: Line 47:
 
!Fully working without patching
 
!Fully working without patching
 
|-
 
|-
|A8N SLI Deluxe socket 939
+
|Place holder
|NForce 4
+
|Place holder
|Installed
+
|Place holder
*from Uphuck 10.4.9 v1.3 upgraded to 10.4.10
+
*Place holder
*Dethforce
+
|Place holder
*sound, network (with patch) work
+
|}
*I had to put a line in the boot file to get the keyboard to work
+
*I haven't tried the sata much as I heard there were errors
+
*Win XP is on sata drive, Mac is on pata
+
|no
+
|-
+
 
+
 
+
|} . . . . . . . . . . . . . .
+
  
 
====DFI====
 
====DFI====
Line 100: Line 75:
 
!Fully working without patching
 
!Fully working without patching
 
|-
 
|-
|P4M800PRO-M
+
|Place holder
|VIA P4M800Pro & VT8237R+
+
|Place holder
|Install JAS 10.4.8 with semthex...then used these instructions to update to 10.4.9 http://forum.insanelymac.com/index.php?showtopic=45283&hl
+
|Place holder
 
*Place holder
 
*Place holder
 
|Place holder
 
|Place holder
|} . . . .
+
|}
  
 
====Foxconn====
 
====Foxconn====
Line 128: Line 103:
 
!Fully working without patching
 
!Fully working without patching
 
|-
 
|-
|8I865GME Rev 2.0
+
|Place holder
|Everything working fine. usb 2.0 sata II, lan, audio, firewire, video only 1024*764. restart problem solved. little slow than jas  10.4.7. DVD player not working.
+
|Place holder
|uphuck 10.4.9
+
|Place holder
|
+
*Place holder
 +
|Place holder
 
|}
 
|}
  
Line 141: Line 117:
 
!Fully working without patching
 
!Fully working without patching
 
|-
 
|-
|MSI 915PL Neo-V LGA775
+
|Place holder
|Intel 915PL + ICH6
+
|Place holder
|Everything seems to be working smoothly except for the following:
+
|Place holder
*System Preferences show that I have audio input from my headphone but Skype isn't working properly(cannot hear contact speaking, nor can the other side)
+
*Place holder
*When dual-booting with XP, Ethernet doesn't work after a Reboot in XP; instead of Reboot, a full shutdown (power off) is required to solve this problem
+
|Place holder
|Yes
+
 
|}
 
|}
  
Line 156: Line 131:
 
!Fully working without patching
 
!Fully working without patching
 
|-
 
|-
|P17G
+
|Place holder
|Intel 945GC ICH7
+
|Place holder
|All Pro Apps Working fine, minor issues with video card not displaying certain things, iLife, tested
+
|Place holder
with JaS Tiger 10.4.9 and Kallyway Leo 10.5.1
+
*Place holder
|No Patching Needed
+
|Place holder
|} . . .
+
|}
  
 
===Intel===
 
===Intel===
Line 186: Line 161:
 
!Fully working without patching
 
!Fully working without patching
 
|-
 
|-
|PX865 PEPROII
+
|Place holder
|Intel 865 PE/ ICH5
+
|Place holder
|Uphuck 10.4.9 1.3i with Intel SSE3 kernel. Everything seems to work.
+
|Place holder
*No fully tested yet
+
*Place holder
|No
+
|Place holder
|} . . . . . . .
+
|}
  
 
====AsRock====
 
====AsRock====
Line 199: Line 174:
 
!Notes
 
!Notes
 
!Fully working without patching
 
!Fully working without patching
 
|-
 
|[[4CoreDual-VSTA]]
 
|PT 880 Ultra Chipset
 
|Install method : Uphuck 1,4
 
*Format & set partition as MBR
 
*patch : CPUPowermanagemnt
 
*VGA : ViaRhine
 
*System : Azalia Out
 
*Network : Via Rhine
 
|Fully
 
 
|-
 
|-
 
|Place holder
 
|Place holder
Line 216: Line 180:
 
*Place holder
 
*Place holder
 
|Place holder
 
|Place holder
|} . . . . . . . . . . . . . . . .
+
|}
  
 
====Asus====
 
====Asus====
Line 224: Line 188:
 
!Notes
 
!Notes
 
!Fully working without patching
 
!Fully working without patching
|-
 
|P4C800 Deluxe
 
|Intel 875P / ICH5
 
|Using latest BIOS (1021.005) with HDD and DVD on IDE-PATA. Audio works OOB, LAN with additional Card, Firewire not tested. RAID disabled. Using uphuck 10.4.9 v1.4i R2 and setting "Remove CpuPower", "Remove Thermal", "ICH8/6").
 
|No
 
|-
 
|P4B533-V
 
|Intel 845E / ICH4
 
|Everything seems to work smoothly, SATA, except audio (uphuck 10.4.9 v1.4i R3 with SATA support).
 
|Yes
 
 
|-
 
|-
 
|[[P4P800 VM]]
 
|[[P4P800 VM]]
 
[http://www.asus.com/products.aspx?l1=3&l2=12&l3=33&model=184&modelmenu=1 ASUS Page]
 
[http://www.asus.com/products.aspx?l1=3&l2=12&l3=33&model=184&modelmenu=1 ASUS Page]
 
|Intel 865G GMCH / ICH5
 
|Intel 865G GMCH / ICH5
|Everything seems to work smoothly, SATA, network and USB. Audio works stereo, but output jack is mic in by default!
+
|Everything seems to works smoothly, SATA, network, USB. Audio works stereo, but output jack is mic in by default!
* To fix that (to change it back to the line out) you must modify the file '/System/Library/Extensions/AppleAC97Audio.kext/Contents/PlugIns/AppleAC97CodecAD198x.kext/Contents/Info.plist'
+
# To fix that (to change it back to the line out) you must modify the file '/System/Library/Extensions/AppleAC97Audio.kext/Contents/PlugIns/AppleAC97CodecAD198x.kext/Contents/Info.plist'
# Find the line with <string>ADS75 ADS74 ADS73 ADS72</string>
+
## Find the line with <string>ADS75 ADS74 ADS73 ADS72</string>
# Change it with <string>ADS75 ADS74 ADS73 ADS72 ADS70</string>
+
## Change it with <string>ADS75 ADS74 ADS73 ADS72 ADS70</string>
# The next step is to load the AppleAC97CodecAD198x.kext
+
## The next step is to load the AppleAC97CodecAD198x.kext
 +
<p>With the 10.4.6 myz install disc + jaz 10.4.7 update: video with VESA 3.0 driver, no CI, no QE (no kext load, not even if editing the 830.kext). Recognized as an ADP2,1 (development platform).</p>
 
|Yes
 
|Yes
|-
+
|}
|[[P4P800]]
+
|Intel P4 2.8GHz HT
+
|Not work (kernel panic with Uphuck 1.3 with Intel SSE2 kernel)
+
|-
+
|P4P800 Deluxe
+
|Intel P4 3.0GHz HT
+
|Everything seems to work
+
|Yes
+
|-
+
|P4P800S
+
|Intel P4 3.0GHz HT
+
|Everything seems to work. Used Uphuck 1.3 with Intel SSE2 kernel.
+
|Yes
+
|-
+
|P5GD2-X
+
|Intel 915P, P4 3.0 core solo 65nm
+
|Everything works including QE\CI with callisto 0.08 & coverg patch on DELL 2407WFP (VGA), execept system volume control, and DVI out on video card. My hardware: Saphire ATI x800 GTO 256 pci-x (flashed to x800 GT new id: 0x554b old id 0x554f ). Sound work with sudo kextload /System/Library/Extensions/AppleAC97Audio.kext/Contents/PlugIns/AppleAzaliaAudio.kext/Contents/PlugIns/AppleAzaliaController.kext/
+
|Yes
+
|-
+
|P5LD2-VM
+
|Intel 945G, Celeron D 347 3.06
+
|Core Image & Quartz Extreme Supported With Integrated GMA950 Display, SATA Ports & IDE Ports Work. Onboard LAN works, although Network Control Panel claims the cable is disconnected. (JAS 10.4.8 DVD Updated to 10.4.9) Audio does not work out of the box. Required HDA Patcher. Sleep does not work. System reboots and Powers down with no issues.
+
|No
+
|} . . . .
+
  
 
====Biostar====
 
====Biostar====
Line 311: Line 242:
 
|Place holder
 
|Place holder
 
|}
 
|}
 
====FOXCONN====
 
{| class="wikitable" width="100%"
 
!Hardware Name (socket type)
 
!Chipset
 
!Notes
 
!Fully working without patching
 
|-
 
|Foxconn 45CMX Socket 775
 
|Intel 945GC
 
|Working
 
*SATA
 
*USB
 
*PS2
 
*Grafics
 
*Lan Needs Drivers [[http://forum.insanelymac.com/index.php?showtopic=84016 look here]] and kext patching [[http://forum.insanelymac.com/index.php?showtopic=29436 look here]]
 
|No
 
|} . . .
 
  
 
====Gigabyte====
 
====Gigabyte====
Line 337: Line 250:
 
!Fully working without patching
 
!Fully working without patching
 
|-
 
|-
|GA-945GCM-S2C
+
|Place holder
|945GC
+
|Place holder
|Everything works great using the correct install settings on the uphuck installer.  LAN, Audio, GMA950 graphics all work.  I used the uphuck 10.4.9 v1.4i R3 release.
+
|Place holder
|Yes, with the right installer settings.
+
*Place holder
 +
|Place holder
 
|}
 
|}
  
 
====Intel====
 
====Intel====
{| class="wikitable" width="100%"
 
!Hardware Name (socket type)
 
!Chipset
 
!Notes
 
!Fully working without patching
 
|-
 
|D945GNTL
 
|Intel® 945G Express Chipset
 
|Works: LAN (Intel Pro 10/100, IONetworkingFamily 10.4.7), USB, Audio (SigmaTel 9220, Blue = out, green  = in, pink = Mic), SATA and ATA
 
|JaS 10.4.8 DVD SSE3 + JaS 10.4.9 Combo Update
 
|-
 
|D945GTPLKR
 
|Intel 945G Express Chipset, Intel GMA950 Graphic Chipset
 
|Everything works fine exept: 1) LAN works without fuzz when in Bios "boot to Network" is enabled 2) Sigmatel 9220 with no "line in" function (blue = line out, green = nothing, red = Mic); All Apple Security Updates and Application Updates till 2007-06-11 can be directly applied without further ados
 
|10.4.9 uphuck install dvd 1.2 with: Intel SSE3 Kernel, IOATAFamily Patch, ICH7-R Driver, Azalia Audio Driver
 
|-
 
|D975XBX Rev 3.02
 
|Intel® 975X/ ICH7R
 
|Works: LAN, USB, FireWire, Audio is working by switching to the blue pin instead of the green 1 (with the SigmaTel 9221 AppleHDA Patch), SATA and ATA133 (with the Jas 10.4.8 patched ppf1 dvd), Raid not tested.
 
|JaS 10.4.8 DVD With PPF1 Patch and JaS 10.4.9 Combo Update
 
|}
 
 
====Iwill====
 
 
{| class="wikitable" width="100%"
 
{| class="wikitable" width="100%"
 
!Hardware Name (socket type)
 
!Hardware Name (socket type)
Line 380: Line 271:
 
|}
 
|}
  
====MSI====
+
====Iwill====
 
{| class="wikitable" width="100%"
 
{| class="wikitable" width="100%"
 
!Hardware Name (socket type)
 
!Hardware Name (socket type)
Line 420: Line 311:
 
*Place holder
 
*Place holder
 
|Place holder
 
|Place holder
|} .
+
|}
 +
 
  
 
==Processors==
 
==Processors==
Line 430: Line 322:
 
! Full Work / No Patch
 
! Full Work / No Patch
 
|-
 
|-
|Opteron 175
+
|Place Holder
|works like a charm
+
|Place Holder
|Opteron 175 @ 2.2
+
|Place Holder
|just required AMD kernel
+
|Place Holder
|} . .
+
|}
  
 
===Intel===
 
===Intel===
Line 442: Line 334:
 
! Recognized as
 
! Recognized as
 
! Full Work / No Patch
 
! Full Work / No Patch
|-
 
|Intel Core 2 Duo E4500 Allendale 2.2GHz
 
|uphuck 10.4.9 v1.4i R3 installer used
 
|Recognized as 2.21ghz Core2Duo
 
|Yes
 
|-
 
|Intel® Core™2 Duo E6600 (2.4 GHz)
 
|JaS 10.4.8 SSE2/SSE3 + ppf1 and JaS 10.4.9 Combo Update, kernel Semthex 8.9.1 - Both cores working, 100% trouble-free
 
|Recognized as a dual core 2.4 Ghz Cpu
 
|Yes
 
 
|-
 
|-
 
|Celeron D 325
 
|Celeron D 325
|Used JaS 10.4.8 SSE2 SSE3 reseed w/Semtex 8.8.1 + JaS 10.4.9 SSE3 patch w/Semtex 8.9.1, it didn't worked well right away (choppy sound and slower GUI) but I set the com.apple.info.plist "<key> Kernel Flags </key>" entry with "<string>fsb=133</string>" and everything went smoothly!
+
|Used JaS 10.4.8 SSE2 SSE3 reseed w/Semtex 8.8.1 + JaS 10.4.9 SSE3 patch w/Semtex 8.9.1, it didn't worked well right away (choopy sound and slower GUI) but I set the com.apple.info.plist "<key> Kernel Flags </key>" entry with "<string>fsb=133</string>" and everything went smoothly!
 
|Intel Core Solo 2.53 Ghz (right speed)
 
|Intel Core Solo 2.53 Ghz (right speed)
 
|Yes / See Notes
 
|Yes / See Notes
|-
+
|}
|Intel® Pentium D 940+ (3.2Ghz)
+
 
|JaS 10.4.8 SSE3 + JaS 10.4.9 Combo Update, kernel Semthex 8.9.1 - cores working
+
|Recognized as a 4Ghz Intel Core Duo
+
|Yes
+
|-
+
|Intel® Pentium 4 (2.53Ghz and No SSE3)
+
|uphuck 10.4.9 v1.4i R3
+
|Intel Pentium 4 2.53 Ghz
+
|Yes
+
|-
+
|Intel® Pentium 4 (1.8Ghz and No SSE3)
+
|JaS 10.4.8 SSE2 SSE3 AMD kernel 8.8.1, updated to 10.4.9 with 8.9.1 kernel
+
|Intel Core Solo 1.79Ghz (right speed)
+
|Yes
+
|-
+
|Intel® Pentium 4 530J (3.00 GHz, SSE2 and SSE3)
+
|JaS 10.4.8 SSE3 and JaS 10.4.9 Combo Update, kernel 8.9.1, 100% trouble-free
+
|2.99GHz Intel Pentium 4
+
|Yes
+
|} . .
+
  
 
==Graphics Cards==  
 
==Graphics Cards==  
Line 504: Line 367:
 
|-
 
|-
 
!Hardware Name,(VRAM)
 
!Hardware Name,(VRAM)
!Board-Manufacturer
+
!Chip-Manufacturer / Board-Manufacturer
 
!Notes                 
 
!Notes                 
 
!QE / CI
 
!QE / CI
Line 520: Line 383:
  
 
====Intel====
 
====Intel====
 
 
{| class="wikitable" width="100%"
 
{| class="wikitable" width="100%"
 
|-
 
|-
 
!Hardware Name,(VRAM)
 
!Hardware Name,(VRAM)
!Board-Manufacturer
+
!Chip-Manufacturer / Board-Manufacturer
 
!Notes                 
 
!Notes                 
 
!QE / CI
 
!QE / CI
Line 530: Line 392:
 
!Full Work / No Patch
 
!Full Work / No Patch
 
|-
 
|-
|Intel 82945G 8mb
+
|Place Holder
|Intel
+
|Place Holder
|Use native drivers
+
|Place Holder
|none
+
#Place Holder
|1024*768
+
|Place Holder
|without quartz extrime
+
|Place Holder
|} . . . .
+
|Place Holder
 +
|}
  
 
====Matrox====
 
====Matrox====
Line 542: Line 405:
 
|-
 
|-
 
!Hardware Name,(VRAM)
 
!Hardware Name,(VRAM)
!Board-Manufacturer
+
!Chip-Manufacturer / Board-Manufacturer
 
!Notes                 
 
!Notes                 
 
!QE / CI
 
!QE / CI
Line 548: Line 411:
 
!Full Work / No Patch
 
!Full Work / No Patch
 
|-
 
|-
|Place Holder
+
|TripleHead2Go
|Place Holder
+
|Matrox
|Place Holder
+
|JaS 10.4.8 DVD reseed + titan.kext
#Place Holder
+
|Both Yes
|Place Holder
+
|640x170 / 3840x1024
|Place Holder
+
|Yes / Req Titan.kext
|Place Holder
+
 
|}
 
|}
 
 
====NVidia====
 
====NVidia====
  
 +
Prelude: There are a substantial amount of reports on the forums indicating the 7300 does not work as well as reported below.  Remember, everything submitted below are based on information from the author who submitted it, please check the forums for additional information.
 
{| class="wikitable" width="100%"
 
{| class="wikitable" width="100%"
 
|-
 
|-
 
!Hardware Name,(VRAM)
 
!Hardware Name,(VRAM)
!Board-Manufacturer
+
!Chip-Manufacturer / Board-Manufacturer
 
!Notes                 
 
!Notes                 
 
!QE / CI
 
!QE / CI
 
!Resolution
 
!Resolution
 
!Full Work / No Patch
 
!Full Work / No Patch
 +
|-
 +
|Geforce EN7100GS512, 128MB
 +
|nVidia 7100GS / ASUS
 +
|Used Titan driver on JaS 10.4.8 DVD. Only VGA output tested
 +
|Yes / Yes
 +
|All Good
 +
|Yes / Titan on JaS 10.4.8 DVD
 +
|-
 +
|GeForce 7600GT, 256MB
 +
|Nvidia / XFX PVT73GUGD3
 +
|Used Diabolik's XFX 7600 installer (based on Natit dual kext).  Great card!  Very fast in Quake 4, Prey, etc.               
 +
|Yes / Yes
 +
|All Good
 +
|Yes / No
 +
|-
 +
|Geforce 6600 128MB
 +
|ASUS
 +
|Works using Natit. DVI with full QE/CI and resolution change. Monitor sleeps (approx 20sec analog, several min DVI) when going into GUI.
 +
|Both
 +
|ALL
 +
|Yes/Natit
 
|-
 
|-
 
|Geforce 7800GTX 256MB
 
|Geforce 7800GTX 256MB
|ASUS
+
|ASUS
 
|Used the Natit 1.0 Installer from http://www.necnet.de/krass.man/Installers/NVidia%20(Natit)%20Installer.html
 
|Used the Natit 1.0 Installer from http://www.necnet.de/krass.man/Installers/NVidia%20(Natit)%20Installer.html
 
|Both
 
|Both
Line 575: Line 458:
 
|Yes/Requires NV40 thing or the Natit 1.0 or higher Installer
 
|Yes/Requires NV40 thing or the Natit 1.0 or higher Installer
 
|-
 
|-
|Geforce 6600XL 128MB
+
|Geforce 7800GTX 256MB
|Foxconn
+
|BFG
|Worked rightaway
+
|Using the NV40 thing that came in the installer
|Yes/Yes
+
|Both
|HiDefinition
+
|ALL
 +
|Yes/Requires NV40 thing
 +
|-
 +
|Geforce 6600GT 128MB
 +
|Club3d
 +
|Add dev id to Geforce, nvdanv40hal and nvdaresman kexts. Use Natit_dual and all works. 
 +
|Both
 +
|ALL
 +
|Yes/add dev ids
 +
|-
 +
|Geforce 7600GS 256mb
 +
|XFX
 +
|Using Titan 1.0
 +
|Both
 +
|ALL
 +
|Yes/No
 +
|-
 +
|Geforce 7900 GS 256MB (PCI-e)
 +
|BFG
 +
|Everything works perfectly
 +
|Both
 +
|All
 +
|Yes/Titan
 +
|-
 +
|Geforce 7300GS 128mb
 +
|Chaintech
 +
|Working properly using titan.kext! Natit.kext causes screen flip.
 +
|Both
 +
|All
 +
|Yes, Req, Titan.kext
 +
|-
 +
|EN7300GTS(256)
 +
|ASUS
 +
|Using Natit 1.0
 +
|Both
 +
|ALL
 +
|Yes/No
 +
|-
 +
|7600 GS (256MB)
 +
|Manli
 +
|JaS 10.4.7 DVD + Apple 10.4.8 update + natit.kext
 +
|Both
 +
|All(monitor max. 1680x1050)
 +
|natit
 +
|-
 +
|GeForce 7900GT KO
 +
|eVGA
 +
|Works using MacOSX 10.4.8DVD AMD SSE3 TEST 1. DVI with full QE/CI and resolution change. Use Titan NV40.kext option during install.
 +
|Yes
 +
|All resolutions
 
|Yes
 
|Yes
 
|-
 
|-
|Geforce 6500 256MB
+
|7600 GS (256MB)
|XFX
+
|NVidia/Gigabyte
|Used the Natit 1.0, works as 128MB
+
|Used JaS 10.4.8 DVD+titan.kext (Device ID 0x0392)
|Yes/Yes
+
|QE and CI
|HiDefinition
+
|from 640x480 to 1440x900
|Yes/Natit 1.0 or higher
+
|Yes, only installed titan
 
|-
 
|-
|8800GTS 320MB
+
|EN7300GS(256)
|EVGA
+
|ASUS
|used installer from [http://forum.insanelymac.com/index.php?showtopic=65849&hl=8800 here]
+
|Using Nanit
|QE and CI work, there is some problem with full screen mode, something to do with the NF4 chipset
+
|Both
|all resolutions
+
|ALL
|requires patch
+
|Yes/No
|} . . . .
+
|-
 +
|Geforce 7300 GT (256MB)
 +
|ASUS
 +
|Works using Titan Kext or Natit. Both VGA and DVI. Full QE/CI
 +
|Yes
 +
|Any
 +
|titan 11-01 or Natit 1.0.
 +
|-
 +
|Geforce 7300 LE (256MB)
 +
|Sparkle
 +
|Works using Natit Dual. Mirroring, VGA, S-Video & DVI Now Works w/ Natit Dual v0.2, Full QE/CI
 +
http://forum.insanelymac.com/index.php?showtopic=35970&hl=natit%20dual&st=0
 +
|Yes
 +
|Any
 +
|Natit Dual v0.2
 +
|-
 +
|Geforce 7300 LE (256MB)
 +
|MSI
 +
|Works using MacOSX 10.4.8DVD AMD SSE3 TEST 1. DVI with full QE/CI and resolution change. Use Titan NV40.kext option during install
 +
|Yes
 +
|Any
 +
|Titan
 +
|-
 +
|GeForce 7600 GT PCI-E(256Mb)
 +
|Gigabyte [Silent-pipe version]
 +
|VGA works fine with Dell 2007wfp, DVI fails with blinking/res change error, needs correct EDID I think
 +
|Yes
 +
|All resolutions
 +
|Titan 04/11
 +
|-
 +
|GeForce 7600 GT
 +
|MSI
 +
|Works using Titan. DVI with full QE/CI and resolution change.
 +
|Yes
 +
|All resolutions
 +
|Titan
 +
|-
 +
|GeForce 7600 GT
 +
|Gigabyte
 +
|Works using Titan. DVI with full QE/CI and resolution change.
 +
|Yes
 +
|All resolutions
 +
|Titan
 +
|-
 +
|GeForce 7900GS
 +
|PixelView
 +
|Works using Titan. DVI with full QE/CI and resolution change.
 +
|Yes
 +
|All resolutions
 +
|Titan
 +
|-
 +
|GeForce 7900GS
 +
|Leadtech/ Winfast
 +
|Works using Natit 1.0, Natit dual v0.02 (screen spanning works) and Titan. Both DVI works with full QE/CI and resolution change.
 +
|Yes
 +
|All resolutions
 +
|Natit Universal 1.0, dual 0.02 and titan
 +
|-
 +
|GeForce 6800GT
 +
|ASUS
 +
|Works using MacOSX 10.4.8DVD AMD SSE3 TEST 1. DVI with full QE/CI and resolution change.
 +
|Yes
 +
|All resolutions
 +
|Yes
 +
|-
 +
|GeForce 6800 Ultra 256mb
 +
|XFX
 +
|Works using "JaS.10.4.8.AMD.Intel.SSe2.SSe3.v1p ppf" DVD. DVI with full QE/CI and resolution change. If the screen goes black when booting just switch the monitor from one DVI port to the other.
 +
|Yes
 +
|All resolutions
 +
|Titan
 +
|-
 +
|GeForce 7800GTX(256Mb)
 +
|Leadtech
 +
|DVI Works like a champ at [email protected]  Thats the highest this monitor will go
 +
|Yes
 +
|All resolutions
 +
|Titan 04/11
 +
|-
 +
|GeForce 7600 GT(256Mb)
 +
|Manli Captiva
 +
|Works using Titan Kext. DVI works full QE/CI
 +
|Yes
 +
|Any
 +
|Borisb installer for Nvidia (Titan) 10.4.8
 +
|-
 +
|NVIDIA Quadro FX540 128 MB
 +
|NVIDIA
 +
|Works using Titan Kext. VGA works DVI not tested. Full QE/CI/OpenGL
 +
|Yes
 +
|Any
 +
|titan 11-02
 +
|-
 +
|NVIDIA GeForce 7600GT 256MB
 +
|NVIDIA
 +
|Works with Darwin 8.8.1 kernel (Semthex), Apple's NVIDIA kexts and omni's Titan kext. QE/Q2DE/CI supported.
 +
|Yes
 +
|Any all the way upto and including 2560x1600
 +
|titan 11-02
 +
|-
 +
|Geforce 6600 256 MB
 +
|XFX
 +
|Works using Titan Kext. DVI works full QE/CI
 +
|Yes
 +
|Any
 +
|titan 11-01
 +
|-
 +
|PNY Geforce 6600GT  128MB Dual DVI
 +
|PNY
 +
|Works perfectly using Titan Kext. DVI works full QE/CI
 +
|Yes, Full QE/CI
 +
|Any
 +
|titan 11-01
 +
|-
 +
|Geforce 6200 TurboCache
 +
|XFX/Inno3d/AOpen
 +
|Works using Titan Kext or Natit Installer 1.0. DVI works and QE & CI. No screen artifacts! Works perfectly
 +
|Yes
 +
|Any
 +
|Install Natit! Done!
 +
|-
 +
|GeForce 7800GT
 +
|nVidia/Gigabyte
 +
|Works perfectly
 +
|QE/CI
 +
|Any
 +
|Natit
 +
|-
 +
|NVIDIA GeForce 7300 GS PCI-E 256Mb
 +
|PNY
 +
|Works using Titan and Natit Kext. VGA works full QE/CI. DVI not tested, though it should work.
 +
|Yes
 +
|Any
 +
|10.4.8 Real w/Titan 11-04
 +
|-
 +
|Geforce 6500 (256MB)
 +
|Nvidia
 +
|Using 10.4.8, latest semthex kernel, Titan.kext enables CI/QE. Everything working!
 +
|Yes
 +
|Any
 +
|Titan works, Natit installer produces black screen
 +
|-
 +
|Quadro FX 1400 Go(256MB)
 +
|Nvidia
 +
|Using 10.4.8, latest semthex s4 kernel, Titan.kext enables CI/QE. Everything working!
 +
|Yes
 +
|Any
 +
|Titan works, Natit not tested.
 +
|-
 +
|NVidia GeForce 7300LE 64Bit(128MB)
 +
|NETGATE (Brasil)
 +
|Using JaS 10.4.8 AMD SSE3 Test 1, latest semthex kernel, Titan.kext (for AMD 10.4.8, needs DEVid edit on Info.Plist[README.TXT on Titan]) enables CI/QE. TV-Out don't work, DVI not tested (yet!), Very usable, but not so fast due card low performance, works great! Resolutions/Colors/Frequency are all configurable via System Preferences!
 +
|Yes
 +
 +
|Titan works, Natit not tested.
 +
|-
 +
|[http://www2.pny.com/7300-GT-256MB-PCIe--P1895C14.aspx Geforce 7600GT 256MB]
 +
|XpertVision
 +
|Works in normal mode when following instructions in QI/CE Feild.
 +
|Yes, you have to put your Device Id's into NVDAresman.kext, GeForce.kext, IONDRVsupport.kext and NV40Hal.kext
 +
|ALL
 +
|No/Natit, titan untested.
 +
|-
 +
|GeForce 7300GT 256MB PCIe
 +
|PNY Technologies
 +
|Everything pretty much works perfectly out-of-the-box.
 +
*Using Mac OS X 10 4 8 - JaS AMD Intel SSE2 SSE3 incl PPF1 (Semthex 8.8.1) w/Titan.kext included 
 +
*Resolutions and Frequency are all adjustable in System Preferences
 +
*DVI connector 2nd Display shows up in System Profile but not tested
 +
*TV-Out not tested
 +
|Full QE/CI Support
 +
|All resolutions
 +
|Titan 100%, Natit not tested.
 +
|-
 +
|NVidia GeForce 7300LE 64Bit(128MB)
 +
|NETGATE (Brasil)
 +
|Using JaS 10.4.8 AMD SSE3 Test 1, latest semthex kernel, Titan.kext (for AMD 10.4.8, needs DEVid edit on Info.Plist[README.TXT on Titan]) enables CI/QE. TV-Out don't work, DVI not tested (yet!), Very usable, but not so fast due card low performance, works great! Resolutions/Colors/Frequency are all configurable via System Preferences!
 +
|Yes
 +
 +
|Titan works, Natit not tested.
 +
|-
 +
|7900 GTO 512 MB
 +
|MSI
 +
|The ROM of this card must be flashed with the proper memory address locations in order for the Darwin bootloader to detect the full 512 MB.  See [http://www.macvidia.com/index.php?option=com_smf&Itemid=67&topic=1082.0 this thread] for details.
 +
|Yes
 +
|All
 +
|YES/Once the card is flashed and either Titan or Natit is used
 +
|-
 +
|GeForce 7900GS 512MB PCIe
 +
|XpertVision
 +
|Works after modding the card's ROM.
 +
|Both
 +
|All resolutions
 +
|Natit. - Titan not tested.
 +
|}
 +
 
 +
Additional Information: There are a substantial amount of reports on the forums indicating the 7300 does not work as well as reported above.  Remember, everything submitted above are per-user, please check the forums for additional information.
  
 
===AGP===
 
===AGP===
Line 603: Line 731:
 
|-
 
|-
 
!Hardware Name,(VRAM)
 
!Hardware Name,(VRAM)
!Board-Manufacturer
+
!Chip-Manufacturer / Board-Manufacturer
 
!Notes                 
 
!Notes                 
 
!QE / CI
 
!QE / CI
Line 609: Line 737:
 
!Full Work / No Patch
 
!Full Work / No Patch
 
|-
 
|-
|Radeon X800-XT (256MB)
+
|ATI 9800XT (128MB)
|Sapphire
+
|ATI
|Works after changing the Device-ID in CallistoHAL.kext and installation of Callisto-06
+
|Had to add device ID to ATIRADEON9700.kext Later used Callisto 008 for res switching, follow callisto faq
|No / No
+
to get res switching and QE CI. Plus installed QuartzSimple to enable Quartz2DExtreme
 +
|YES / YES
 
|Any
 
|Any
|No/No
+
|YES
 
|-
 
|-
|Radeon X1600 Pro (256MB)
+
|Ati Mobility 9700 64MB
 +
|Notebook
 +
|Using Callisto driver 03 fixed - adjusted with vendor ID
 +
|No
 +
|1280x800
 +
|Without hardware acceleration
 +
|-
 +
|-
 +
|Radeon X1600 (256MB)
 
|Sapphire
 
|Sapphire
|Works out of the box on an ASUS P4P800-VM MB
+
|Works using borisbad installer. No Energy Saver functions. However, if you use a VGA&gt;DVI adapter, display may go to sleep. (Device ID 0x71C2)
|Yes plus Q2D capable (gives a great speed boost on iWork '06 Pages program)
+
|Yes plus Q2D capable (gives a speed boost on Finder)
 
|Any
 
|Any
|Yes
+
|No
 
|-
 
|-
|Radeon X1950 Pro (512MB)
+
|Radeon X1600 (512MB) ICE-Q
|Sapphire
+
|HIS
|Works on a Gigabyte 8IPE100 MK MB with fresh install and Bronya's (Dmitrik) drivers for Prionace
+
|10.4.8 with borisbad AGP-ATI Addon during the installation (Device ID 0x71C2)
 +
|Both
 +
|Only 1024x768 with some Artefacts :-(
 +
|No
 +
|-
 +
|Radeon X800Pro (256MB)
 +
|ATI
 +
|Callisto 008beta with 10.4.8 DVD Disk (Device ID 0x4a49)
 +
|Both
 +
|from 640x480 to 1650x1050
 
|Yes
 
|Yes
 +
|-
 +
|Radeon X800XL (256MB)
 +
|ATI, Gigabyte
 +
|Jas 10.4.8, No HW Acc. No QE/CI, Achieved 1600x1200 with Manual Boot Fix, Device ID 0x554d
 +
|No
 +
|1024x768, 1600x1200
 +
|No
 +
|-
 +
|Radeon 9800 Pro (128MB)
 +
|ATI
 +
|Callisto 008beta with JAS 10.4.8 Intel SSE2 Patch. DVI OK. Mouse tearing partially elimiated with Mouse Locator. Tested OpenGL with WoW, performace is soso, after return to desktop the cursor flickers and had to reboot.
 +
|Both
 +
|Any (Using 1280x1024 on 17" LCD)
 +
|No
 +
|-
 +
|Radeon 9800 (128MB)
 +
|ATI
 +
|works natively on jas intel/amd patched 10.4.8.
 +
|Both
 +
|Any
 +
|No
 +
|-
 +
|Radeon 9600 Pro (256MB)
 +
|ATI, PowerColor(Kurouto-Shikou released in Japan)
 +
|JaS 10.4.6 DVD + Jas 10.4.8 Update(Included in Jas 10.4.8 DVD). QE / CI enabled by Callisto. This is already included in Jas 10.4.8 Update. Modify the ATIRadeon9700GA.plugin using the methods described in the Callisto package. Mouse tearing can be decreased with MouseLocator.
 +
|Both
 
|Any
 
|Any
 +
|By AGPGart.kext(1.1beta needs modify) recognized as AGP Card
 +
|-
 +
|Radeon 9800 (256MB)
 +
|ATI
 +
|works on jas intel/amd patched 10.4.8. id 4e48 china QE / CI enabled by jas intel only .Mouse tearing can be decreased with mightymouse & AntiTear2
 +
but read it as pci card shake works prefect but final cut dosent work because there is no agp AGPGart dosent work till now
 +
|1024*768*32 bit only
 +
|-
 +
|Radeon 9600 Pro EZ (128MB)
 +
|ATI by PowerColor
 +
|Jas 10.4.8, QE/CI with Callisto008 file and follow directions in FAQ, Achieved 1900x1200, Device ID 0x4150 Vendor ID 1002
 
|Yes
 
|Yes
|} . . .
+
|800x600 to 1900x1200
 +
|No
 +
|}
  
 
====NVidia====
 
====NVidia====
Line 635: Line 820:
 
|-
 
|-
 
!Hardware Name,(VRAM)
 
!Hardware Name,(VRAM)
!Board-Manufacturer
+
!Chip-Manufacturer / Board-Manufacturer
 
!Notes                 
 
!Notes                 
 
!QE / CI
 
!QE / CI
Line 641: Line 826:
 
!Full Work / No Patch
 
!Full Work / No Patch
 
|-
 
|-
|Geforce 6200 (128MB)
+
|GeForce Ti 4200
|XFX
+
|Leadtek
|Works perfectly after installing Titan, no kexts editing required
+
|Works using Natit. All resolutions. Still recognised as PCI card however.
 +
|QE works
 +
|All resolutions
 +
|Semthex kernel, Natit kext and edited NVDAResman.kext, GeForce.kext (and NVDANV40Hal.kext-probably unneeded) with device/vendor id
 +
|-
 +
|Geforce 7100GS
 +
|
 +
|Used Natit with device id in needed scripts
 +
|Yes,Yes
 +
|DVI works with custom resolution settings and S-video work
 +
|
 +
|-
 +
|GeForce4 Ti 4800SE 128mb AGP
 +
|MSI Ti4800SE-TD8X
 +
|Added DEV ID to Geforce.kext, added natit, it loads NvidaNV20HAL. Later added AGPGart which lowered cpu usage substantially
 +
|CI & OpenGL, no QE
 +
|Dual monitor, all res.
 +
|Natit/AGPGart
 +
|-
 +
|Geforce 5200 (128MB)
 +
|XFX/Inno3d
 +
|Works using Titan Kext and Natit Installer 1.0. DVI works and QE & CI. no screen artifacts! (Device ID 0x0322)
 +
|Yes, both
 +
|Any
 +
|No
 +
|-
 +
|GeForce FX 5200
 +
|Unbranded (DeviceID = 0x0322)
 +
|Works using Titan. All resolutions, widescreen, CI/QE/GL.
 
|Yes
 
|Yes
 +
|All resolutions
 +
|Titan
 +
|-
 +
|GeForce FX 5200 128MB
 +
|COMPUSA
 +
|Works using Natit. All resolutions, CI/QE VGA-DVI-TV OUT.
 +
|Yes
 +
|All resolutions
 +
|Semthex kernel, New DVD no patch
 +
|-
 +
|GeForce FX 5500
 +
|Unbranded
 +
|Works using Titan. All resolutions, widescreen, CI/QE/GL.
 +
|Yes
 +
|All resolutions
 +
|Titan
 +
|-
 +
|GeForce FX 5600
 +
|XFX
 +
|Works fully with latest Semthex under both Titan & Natit. (Natit provides better performance it seems.)
 +
|Yes, both.
 
|Any
 
|Any
|Yes/No
+
|Semthex kernel, Natit kext and edited NVDAResman.kext, NVDANV40.kext and GeForce.kext with device/vendor id (0x0312d10. - nix)
 
|-
 
|-
|Geforce 7300GT (256MB)
+
|GeForce 5700 AGP 128MB
|PNY
+
|Asus V9570TD
|Works perfectly after installing mac.nub's 256MB inject on the 10.4.10 disc
+
|10.4.8/8.8.1: Works well w/Natit on JaS 10.4.8 ISO. Need to replase card ID in .plist files of Geforce.kext, NVDARESMAN.kext and NVDANV30Hal.kext, after that QE/CE works. 
|Yes and OpenGL
+
|Yes - Both
 +
|[email protected], higher resolutions are supported.
 +
|Yes/No (Need Natit; without editing .plists - QE/CE not supported).
 +
|-
 +
|NVIDIA FX5700LE (256mb)
 +
|BFG Tech
 +
|I was able to install the Titan kext while I was booted into the Install CD, so I got the cool Cube effect of the setup assistant! A tiny bit of lag while the card starts up again after not doing any QE/CI in a while, (Dragging something into Dashboard doesn't ripple the first time, but all times after that for like 10 minutes, unless you don't let it power down.)
 +
|Both
 +
|All that I can see, using 1280x1024 on my CRT, absolutely stunning.
 +
|Titan activates about 90% of the card.
 +
|-
 +
|Geforce 5900XT (128MB)
 +
|MSI
 +
|Natit Installer 1.0. DVI works and QE & CI. no screen artifacts
 +
|Yes, both
 
|Any
 
|Any
 +
|No
 +
|-
 +
|Geforce 6200 128MB
 +
|Leadtek
 +
|Using Titan.kext
 +
|Both
 +
|1280x1024
 +
|Yes/Requires Titan.kext
 +
|-
 +
|Geforce 6200 TurboCache
 +
|XFX/Inno3d
 +
|Works using Titan Kext and Natit Installer 1.0. DVI works and QE & CI. no screen artifacts!
 +
|Yes, both
 +
|Any
 +
|No
 +
|-
 +
|Geforce 6200(256MB)
 +
|NVIDIA, SPARKLE(Kurouto-Shikou released in Japan)
 +
|Works using Titan Kext. Both VGA and DVI. Full QE/CI. No screen artifacts!
 +
|Yes, both
 +
|Any
 +
|Titan
 +
|-
 +
|Geforce 6200 256MB
 +
|XFX
 +
|Installed Jas 10.4.8 SSE2 SSE3 Intel AMD DVD
 +
|Both
 +
|1280x1024 (Highest For My Monitor)
 +
|Just make sure you check Titan on the DVD for full QE/CI Support!
 +
|-
 +
|XpertVision Nvidia GeForce 6200
 +
|XpertVision
 +
|Works using Titan. All resolutions, widescreen, CI/QE/GL.
 +
|Both
 +
|All resolutions
 +
|Yes, with Titan
 +
|-
 +
|Geforce 6200TC 256MB
 +
|PNY
 +
|Using the NV40 nvidia patch
 +
|Both
 +
|1280x1024
 +
|Yes/Requires NV40 patch who came on the installation, nothing more
 +
|-
 +
|Geforce 6600GT (128MB)
 +
|Apollo
 +
|Titan Kext  DVI works and QE & CI. no screen artifacts, smooth as silk
 +
|Yes, both
 +
|Any
 +
|No
 +
|-
 +
|GeForce 6600 TDH (256)
 +
|Leadtek
 +
|10.4.8/8.8.1: AMD Final SSE2 SSE3 from Piratebay but without NV40 and X1000 , then installed latest Natit. 6600 TDH works perfectly, 7600GT need to edit Natit.kext and NV40 to include the device ID (02e0). Dual display works flawlessly on 6600, but on 7600 GT, digital output doesn't work, only works by using a convertor making both output analogue, which is bad for my cheap LCD display.
 +
|BOTH
 +
|All resolution and frequency
 +
|Natit full work on 6600
 +
7600GT required edit of Natit and NV40 kext and digital output won't work unless convert to analogue by adaptor.
 +
Make sure don't click X1000 ad NV40 support in 10.4.8 AMD Final SSE3 installation, then install latest Natit or Natit dual, then edit kext if 7600 GT.
 +
|-
 +
|GeForce 6600GT 128Mb
 +
|Asus
 +
|Works with new Natit Uni. installer!
 +
|Yes, both.
 +
|Any
 +
|No
 +
|-
 +
|GeForce 6600GT AGP 128MB
 +
|EVGA
 +
|10.4.8/8.8.1: Worked fine with natit and titan method. QE/CI fully work. Resolution and refresh work. World Of Warcraft works. WolfET Works. Dual-screen with natit (often 10sec blackscreen during startup).
 +
|Yes, Both
 +
|Any
 +
|No, Need Titan or Natit
 +
|-
 +
|Geforce 6600GT  128MB
 +
|NVidia/Club3D
 +
|Works perfectly.
 +
|Yes
 +
|Any
 +
|Yes
 +
|-
 +
|Gainward 6600GT (128Mb)
 +
|nVidia / Gainward
 +
|natit patch from Jas 10.4.8
 +
|Yes / Yes
 +
|All
 +
|Yes / No
 +
|-
 +
|Geforce 6800 (128MB)
 +
|Leadtek
 +
|Works perfektly using OSX 10.4.8_AMD_SSE3 from Piratebay after adding 0x004110de in IOPCIMatch in the Geforce.kext(Contents/Info.plist) and deleting AGPGuard.kext
 +
|Yes, both
 +
|Any
 +
|Titan
 +
|-
 +
|Geforce 6800GT (256MB)
 +
|ASUS
 +
|Works using Titan Kext. Both VGA and DVI. Full QE/CI
 +
|Yes, both
 +
|Any
 +
|titan 11-01
 +
|-
 +
|Microstar GeForce 6800 128MB
 +
|NVIDIA
 +
|Titan`s kext, Kexts and framework from Apple Intel Update.
 +
|Both
 +
|Any (Using 1680x1050 on 20" wide LCD)
 +
|TITAN kext and edited NVDAResman.kext NVDANV40.kext and geforce,kext
 +
|-
 +
|Geforce 6800 GS 256MB
 +
|XFX
 +
|Everything works perfectly
 +
|Both
 +
|All
 +
|Yes/Titan
 +
|-
 +
|Geforce 7600GS (256MB)
 +
|PNY
 +
|Had to install nvidiaNV40.pkg over a clean Jas 10.4.8, remove AGPGart.kext, edit GeForce.kext, NVDAResman.kext and NVDA40HAL.kext with my own device ID (0x02e1), install in /System/Library/Frameworks OpenGl.framework and QuartzCore.framework taken from original Apple 10.4.8 update using Pacifist, remove Extensions.mkext and Extensions.kextcache, set chown root:wheel and chmod 755 to all Extensions (eg. sudo chown -R root:wheel /System/Library/Extensions/*) and diskutil repairpermission /. After reboot I got QE/CI.
 +
|Yes, both
 +
|Any
 +
|I have Titan.kext but not installed, maybe is included in nvidiaNV40.pkg
 +
|-
 +
|7600GT DDR3 (256)
 +
|Leadtek
 +
|10.4.8/8.8.1: AMD Final SSE2 SSE3 from Piratebay but without NV40 and X1000 , then installed latest Natit. 6600 TDH works perfectly, 7600GT need to edit Natit.kext and NV40 to include the device ID (02e0). Dual display works flawlessly on 6600, but on 7600 GT, digital output doesn't work, only works by using a convertor making both output analogue, which is bad for my cheap LCD display.
 +
|BOTH
 +
|All resolution and frequency
 +
|Natit full work on 6600
 +
7600GT required edit of Natit and NV40 kext and digital output won't work unless convert to analogue by adaptor.
 +
Make sure don't click X1000 ad NV40 support in 10.4.8 AMD Final SSE3 installation, then install latest Natit or Natit dual, then edit kext if 7600 GT.
 +
|-
 +
|Geforce 7600GT (256MB)
 +
|XFX
 +
|Had to edit the NVDAResman and NV40HAL with my own device ID(0x02e0), only annoying thing is the dashboard crash when using it
 +
|Yes, both
 +
|Any
 +
|Titan or Natit
 +
|-
 +
|ASUS N7600GS,(256MB)
 +
|NVidia / ASUS
 +
|Semthex Kernel, DVI Works, VGA Analog not tested yet. I Inserted "02e1" as dev-id into GeForce.kext, NVDANV40HAL.kext and NVDAResman.kext. Injection using Titan.kext
 +
|YES / YES
 +
|Tested up to 1680 x 1050
 +
|Yes / NO - Titan.kext
 +
|-
 +
|Geforce 7800GS 256mb
 +
|BFG
 +
|Using Titan 1.0 and Natit_Dual
 +
|Both
 +
|ALL
 
|Yes/No
 
|Yes/No
|} . .
+
 
 +
|}
  
 
===PCI===
 
===PCI===
Line 661: Line 1,061:
 
|-
 
|-
 
!Hardware Name,(VRAM)
 
!Hardware Name,(VRAM)
!Chip-Manufacturer
+
!Chip-Manufacturer / Board-Manufacturer
!Board-Manufacturer
+
 
!Notes                 
 
!Notes                 
 
!QE / CI
 
!QE / CI
Line 668: Line 1,067:
 
!Full Work / No Patch
 
!Full Work / No Patch
 
|-
 
|-
|Place Holder
+
|GeForce FX 5200 (128 MB)
|Place Holder
+
|Nvidia
|Place Holder
+
|Everything works, including Quartz Extream and Core Image, All right out of the box using the Tubgirl DVD, 10.4.8, Semthex 8.8.1
|Place Holder
+
|Yes!
#Place Holder
+
|All
|Place Holder
+
|Titan and NV40
|Place Holder
+
|-
|Place Holder
+
|PNY GeForce FX 5200 (256 MB DDR)
 +
|Nvidia
 +
|I picked up this card after my Intel onboard video refused to work and I saw the above post. Installed from the JaS AMD-Intel SSE2-SSE3 with PPF1 DVD. Must select the NV40/Titan option or you'll need to download a driver later. All resolutions, QE, and CI work.
 +
|Yes
 +
|All
 +
|Titan and NV40 in installation options
 
|}
 
|}
  
Line 682: Line 1,086:
 
{| class="wikitable" width="100%"
 
{| class="wikitable" width="100%"
 
|-
 
|-
!Hardware Name (VRAM)
+
!Hardware Name,(VRAM)
!Chip-Manufacturer/Board-Manufacturer
+
!Chip-Manufacturer / Board-Manufacturer
 
!Notes                 
 
!Notes                 
 
!QE / CI
 
!QE / CI
Line 689: Line 1,093:
 
!Full Work / No Patch
 
!Full Work / No Patch
 
|-
 
|-
|Mobile 945GM Express Integrated Graphics Controller (rev 03)
+
|Geforce4 Go 440 64mb
|Intel
+
|Nvidia
|Works Natively
+
|Works macvidiadrive  [[no QE / CI]]
|Yes
+
|Both
|1280x1024
+
|ALL
|Yes - Fully works with Intel GMA950 Driver
+
|
|} . . . . . . . . . . . . .
+
 
+
== Sound Cards ==
+
{| class="wikitable" width="100%"
+
 
|-
 
|-
!Hardware Name
 
!Manufacturer
 
!Notes
 
!Fully working without patching
 
 
|-
 
|-
|AC97  6-channel audio codec S/PDIF out interface(ADI 1980)
+
|Quadro4 700 GoGL (NV28GL)
|Realtek
+
|Dell Mobile
|Must patch to get the sound on line out instead of mic in:
+
|Works using NVidiaEFI or using Natit but no internal diplay in that case.
* Edit the /System/Library/Extensions/AppleAC97Audio.kext/Contents/PlugIns/AppleAC97CodecAD198x.kext/Contents/info.plist
+
|QE works
# Find the line with <string>ADS75 ADS74 ADS73 ADS72</string>
+
|All resolutions
# Change it with <string>ADS75 ADS74 ADS73 ADS72 ADS71 ADS70</string>
+
|Semthex kernel, NVidia kext and edited NVDAResman.kext, GeForce.kext and NVDANV20Hal.kext-probably with device/vendor id
# The next step is to load the AppleAC97CodecAD198x.kext
+
|See notes
+
|}
+
 
+
{| class="wikitable" width="100%"
+
 
|-
 
|-
!Hardware Name
+
|Geforce Go 6200 256MB
!Manufacturer
+
|ASUS
!Notes
+
|Works using JAS Amd/Intel SSe2/SSe3 ISO and selecting natit and natit dual support
!Fully working without patching
+
|Both
 +
|ALL
 +
|Yes/Natit
 
|-
 
|-
|M-Audio Revolution 5.1
+
|Geforce Go 7600 128mb
|M-Audio
+
|SonyVaio
|Does not work at all. Card not even detected.
+
|Works perfectly using Titan OR Natit (all versions), but ONLY on an external monitor. Trying to solve that now.
|No
+
|Both OK
|} .
+
|ALL
 
+
|Yes/titan or natit
{| class="wikitable" width="100%"
+
|}
|-
+
!Hardware Name
+
!Manufacturer
+
!Notes
+
!Fully working without patching
+
|-
+
|USB 2.0 Soundkarte Virtual 5.1 Exterior Audio Adapter
+
|Exterior Hong Kong (eBay)
+
|Works without patching, line out and line in
+
* Deaktivate your internal audio, then plug the USB Audio Adapter in your USB 2.0 Port
+
|YES!!! OSX 10.4.9 and 10.4.10 - Super Stereo Sound!
+
|} . .
+
 
+
==Network Cards==
+
===Wired (Ethernet)===
+
{| class="wikitable" width="100%"
+
|-
+
!Hardware Name
+
!Manufacturer
+
!Notes
+
!Fully working without patching
+
|-
+
|DFE-538TX, Device ID 0x1300
+
|D-Link, Vendor ID 0x1186
+
|Works without problems out of the box!
+
|Yes
+
|-
+
|Realtek811B, Device ID 0x8136
+
|Realtek, Vendor ID 0x10EC
+
|Needs Drivers [[http://forum.insanelymac.com/index.php?showtopic=84016 look here]] and kext patching [[http://forum.insanelymac.com/index.php?showtopic=29436 look here]]
+
|No
+
|-} .
+
 
+
===Wireless===
+
{| class="wikitable" width="100%"
+
|-
+
!Interface
+
!Standard
+
!Device
+
!Manufacturer
+
!Notes
+
!Fully working without patching
+
|-
+
|PCI
+
|B/G
+
|WG311T
+
|Netgear
+
|Reconized as Airport right out of the box (What version is it?). Speeds up to 108mb/s. If not recognized try using [[http://forum.insanelymac.com/index.php?showtopic=33089&st=0&p=238508&#entry238508 this method]].  
+
|Yes
+
|-
+
|Mini-PCI Card
+
|802.11 b/g
+
|1390 WLAN (rev 01)
+
|Broadcom Corporation/Dell
+
|uphuck v2 detects this as "Built-in Ethernet" in Network Preferences. No Airport card was shown in Network Preferences even though wireless worked properly. It didn't show the signal strength but webpages were working with no ethernet cable plugged in. This was fixed in v1.3 and v1.4i and the wireless card was displayed properly as "AirPort".
+
|YES, only with uphuck 10.4.9 v1.3 and newer. v1.2 has issues.
+
|} . . . . . .
+
 
+
==Other Expansion Hardware==
+
{| class="wikitable" width="100%"
+
!Hardware Name
+
!Interface
+
!Device
+
!Manufacturer
+
!Notes
+
!Fully working without patching
+
|-
+
|Wireless Traveler SE2
+
|USB
+
|Mouse Optical
+
|Genius
+
|100% works
+
|Yes/Genius Driver
+
|} . . . . . .
+

Please note that all contributions to OSx86 may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see OSx86:Copyrights for details). Do not submit copyrighted work without permission!

Cancel | Editing help (opens in new window)

Templates used on this page:

Powered by MediaWiki © 2021 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki   |   Privacy policy   |   About OSx86   |   Disclaimers