HCL 10.4.9

From OSx86
(Difference between revisions)
Jump to: navigation, search
(→‎Asus)
(→‎Wired (Ethernet))
Line 545: Line 545:
 
!Notes
 
!Notes
 
!Fully working without patching
 
!Fully working without patching
−
|-
 
−
|DFE-528TX
 
−
|D-Link
 
−
|Works without problems
 
−
|Yes
 
−
|-
 
−
|DFE-530TX+ Rev. 02
 
−
|D-Link
 
−
|Works without problems
 
−
|Yes
 
 
|-
 
|-
 
|DFE-538TX, Device ID 0x1300
 
|DFE-538TX, Device ID 0x1300
 
|D-Link, Vendor ID 0x1186
 
|D-Link, Vendor ID 0x1186
−
|Works without problems
+
|Works without problems out of the box!
−
|Yes
+
−
|-
+
−
|Realtek 8139 PCI Card
+
−
|Realtek 8139
+
−
|You have to swap out the IONetworkingFamily.kext file that you will find in Backed Up Extensions/Old on the JaS DVD.  Then it works perfectly. Working .kext file is dated Oct. 29, 2005 for reference.
+
−
|No
+
−
|-
+
−
|Netgear GA311
+
−
|Realtek 8169
+
−
|Works fine with the 10.4.6 IONetworkingFamily.kext. I had to manually set to 1000Base-T to get DHCP-adresse for the first time, afterwards everything went O.K. Gigabit-Speed is working.
+
−
|Needs old IONetworkingFamily.kext
+
−
|-
+
−
|Marvell Yukon
+
−
|Marvell Yukon
+
−
|Works without problems
+
−
|Yes, requires forcedeth.kext
+
−
|-
+
−
|Nforce 4 Network Controller
+
−
|Nvidia
+
−
|Works with [http://forum.insanelymac.com/index.php?showtopic=12933&hl=forcedeth forcedeth] drivers
+
−
|Yes, with [http://forum.insanelymac.com/index.php?showtopic=12933&hl=forcedeth forcedeth] drivers
+
−
|-
+
−
|Intel Pro/100
+
−
|Intel
+
−
|Works without problems
+
−
|Yes
+
−
|-
+
−
|Intel Pro/100 S
+
−
|Intel
+
−
|Not recognized
+
−
|No
+
−
|-
+
−
|Intel Pro/100 VE
+
−
|Intel
+
−
|Works after replacing IONetworkingFamily.kext from 10.4.3. Found /System/Library/Extensions/
+
−
Get from http://forum.insanelymac.com/index.php?showtopic=42782 ..see Post 9
+
−
|Needs old IONetworkingFamily.kext
+
−
|-
+
−
|Netgear FA311
+
−
|Realtek/Netgear
+
−
|May require IONetworkingFamily.kext from 10.4.7
+
−
|Yes
+
−
|-
+
−
|Broadcom 440x
+
−
|Broadcom
+
−
|Works after replaced IONetworkingFamily.kext to version 1.5.0 (OSX 10.4.6).
+
−
|No
+
−
|-
+
−
|3Com 3C905B-TX
+
−
|3com
+
−
|Works after replacing IONetworkingFamily.kext from 10.4.7
+
−
|No
+
−
|-
+
−
|LNE100
+
−
|Linksys
+
−
|Works fine after using the Tulip.kext file.  See SVT_MAN's post.  [http://forum.insanelymac.com/index.php?showtopic=6115&st=20&gopid=304227&#entry304227/ Tulip.kext]
+
−
|Yes
+
−
|-
+
−
|D-Link DGE-528T
+
−
|D-Link (Realtek 8169)
+
−
|Works with the stock AppleRTL8169Ethernet.kext and the realtek driver http://installers.dl.am/ (seems more reliable) after both are patched with the (non standard!) device and vendor id of 1186:4300 (ie 0x43001186). However, after booting, ifconfig shows "media type: <unknown>", and it's necessary to play a bit in System Preferences to get it to work. As a result, I certainly wouldn't recommend this card for a server system! Similar problems with solaris x86 - get a real tek instead (pun intended).
+
−
|No
+
−
|-
+
−
|D-Link DFE-520TX (ViaRhine III)
+
−
|D-Link
+
−
|Works well using kext from http://www.pinxue.net/mac/viarhine.html
+
−
|Yes. Get lastest patch from http://forum.insanelymac.com/index.php?showtopic=15024&st=80&start=80
+
−
|-
+
−
|RTL8169, RTL8168, RTL8110, RTL8111, RTL8100, RTL8101
+
−
|realtek
+
−
|Works using this installer http://installers.dl.am/
+
−
|No
+
−
|-
+
−
|RTL8111B/RTL8139/RTL8169/RTL8168
+
−
|Realtek
+
−
|Needs [http://sourceforge.net/projects/realtekr1000/ RealtekR1000.kext]
+
 
|Yes
 
|Yes
−
|-
 
−
|CompUSA 10/100/1000 Network PCI Card (RTL8169S-32)
 
−
|Realtek
 
−
|Not even detected initially. I can confirm that the [http://sourceforge.net/projects/realtekr1000/ RealtekR1000] driver works great by running the installer. [http://forum.insanelymac.com/index.php?showtopic=29436&st=0 more info here]
 
−
|Needs RealtekR1000
 
 
|}
 
|}
  

Revision as of 05:18, 29 March 2007

This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for 10.4.9 builds only.

Contents

Motherboards

A comprehensive list of possible Intel chipsets

PLEASE INCLUDE THE SOUTH BRIDGE TOO

AMD

Abit

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

AsRock

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

Asus

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

DFI

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

ECS

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

Foxconn

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

Gigabyte

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

MSI

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

PC Chips

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

Intel

Abit

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

Albatron

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

AsRock

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

Asus

Hardware Name (socket type) Chipset Notes Fully working without patching
P4P800 VM

ASUS Page

Intel 865G GMCH / ICH5 Everything seems to works smoothly, SATA, network, USB. Audio works stereo, but output jack is mic in by default!
  • To fix that (to change it back to the line out) you must modify the file '/System/Library/Extensions/AppleAC97Audio.kext/Contents/PlugIns/AppleAC97CodecAD198x.kext/Contents/Info.plist'
  1. Find the line with <string>ADS75 ADS74 ADS73 ADS72</string>
  2. Change it with <string>ADS75 ADS74 ADS73 ADS72 ADS70</string>
  3. The next step is to load the AppleAC97CodecAD198x.kext

With the 10.4.6 myz install disc + jaz 10.4.7 update: video with VESA 3.0 driver, no CI, no QE (no kext load, not even if editing the 830.kext). Recognized as an ADP2,1 (development platform).

 Yes

Biostar

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

ECS

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

Epox

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

Gigabyte

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

Intel

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

Iwill

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

PC Chips

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

Tyan

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder


Processors

AMD

Model Notes Recognized as Full Work / No Patch
Place Holder Place Holder Place Holder Place Holder

Intel

Model Notes Recognized as Full Work / No Patch
Celeron D 325 Used JaS 10.4.8 SSE2 SSE3 reseed w/Semtex 8.8.1 + JaS 10.4.9 SSE3 patch w/Semtex 8.9.1, it didn't worked well right away (choopy sound and slower GUI) but I set the com.apple.info.plist "<key> Kernel Flags </key>" entry with "<string>fsb=133</string>" and everything went smoothly! Intel Core Solo 2.53 Ghz (right speed) Yes / See Notes


Graphics Cards

Please specify if your card is AGP, PCI or PCI-E.
Also, place chip and board manufacturer in their respective column.

Note: For NVidia users, visit http://www.macvidia.org/ for updated drivers. For NVIDIA CARDS PLEASE SPECIFY IF THE CARD DOES QE/CI. Saying the macvidia drivers work but not specifying QE or CI is a bit misleading. If you are using the new kernel then download the Titan kext from http://omni.starchaser.org/titan/ to get QE/CI support

Note:These instructions may confuse noobs as they are a bit out of date. As far as i know, the MacVidia drivers do NOT support QE/CI AT ALL. You can use the kexts that come with your OSx86, or the ones from the 10.4.8 Intel update with your card. You may need to replace OpenGL.Framework too. Titan and Natit are merely enablers which make OSx86 think your VGA BIOS card is an EFI Firmware one (as on a real intel mac), and should load before the NVNVDA* kexts. An installer for Natit can be found at [1]. Check the forums for more info.

Note: For ATI users, visit http://omni.starchaser.org/ for experimental drivers.

Note: As of right now, all ATI cards with working kexts have severe slowdown issues with nForce3 chipsets. There is no fix for this, save getting editting out your card from the kext or using Quartz Debug to shut off Quartz Extreme. Edit: Just use agpgart to get no slowdowns at all on nForce3. Joblo10

PCI Express

ATi

Hardware Name,(VRAM) Chip-Manufacturer / Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
Place Holder Place Holder Place Holder
  1. Place Holder
Place Holder Place Holder Place Holder

Intel

Hardware Name,(VRAM) Chip-Manufacturer / Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
Place Holder Place Holder Place Holder
  1. Place Holder
Place Holder Place Holder Place Holder

Matrox

Hardware Name,(VRAM) Chip-Manufacturer / Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
Place Holder Place Holder Place Holder
  1. Place Holder
Place Holder Place Holder Place Holder

NVidia

Hardware Name,(VRAM) Chip-Manufacturer / Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
Place Holder Place Holder Place Holder
  1. Place Holder
Place Holder Place Holder Place Holder

AGP

ATi

Hardware Name,(VRAM) Chip-Manufacturer / Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
Radeon X1600 Pro (256MB) Sapphire Works out of the box on an ASUS P4P800-VM MB Yes plus Q2D capable (gives a great speed boost on iWork '06 Pages program) Any Yes

NVidia

Hardware Name,(VRAM) Chip-Manufacturer / Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
Place Holder Place Holder Place Holder
  1. Place Holder
Place Holder Place Holder Place Holder

PCI

Hardware Name,(VRAM) Chip-Manufacturer / Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
Place Holder Place Holder Place Holder
  1. Place Holder
Place Holder Place Holder Place Holder

Mobile

Hardware Name,(VRAM) Chip-Manufacturer / Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
Place Holder Place Holder Place Holder
  1. Place Holder
Place Holder Place Holder Place Holder

Sound Cards

Hardware Name Manufacturer Notes Fully working without patching
AC97 6-channel audio codec S/PDIF out interface(ADI 1980) Realtek Must patch to get the sound on line out instead of mic in:
  • Edit the /System/Library/Extensions/AppleAC97Audio.kext/Contents/PlugIns/AppleAC97CodecAD198x.kext/Contents/info.plist
  1. Find the line with <string>ADS75 ADS74 ADS73 ADS72</string>
  2. Change it with <string>ADS75 ADS74 ADS73 ADS72 ADS71 ADS70</string>
  3. The next step is to load the AppleAC97CodecAD198x.kext
See notes

Network Cards

Wired (Ethernet)

Hardware Name Manufacturer Notes Fully working without patching
DFE-538TX, Device ID 0x1300 D-Link, Vendor ID 0x1186 Works without problems out of the box! Yes

Wireless

Interface Standard Device Manufacturer Notes Fully working without patching
MiniPCI Express A/B/G 108Mbps AR5BXB6 Atheros Works as Airport Extreme Yes
PCI B/G WL-138G v2 ASUS v2 only! Works as Airport Extreme, add DeviceID 4318 needed. No
PCI B/G WPCI810G Motorola Works as Airport Extreme. You need to read the forums (Doesn't work. Nothing show in network (Intel D945GTP Board).) No
Mini PCI Express B/G BCM4311 Broadcom Works as Airport Extreme Yes
PCI B/G/BT PC54g-BT MSI Ralink Technology Card. It works perfectly using wireless 802.11bg and bluetooth!. It connects perfectly (sending/receiving) with my Nokia 6280 mobile using bluetooth (isync, data transfer...). Yes
PCI B/G WMP54g Linksys Used Ralink Drivers. (Not for Intel D945GTP Board.Keeping the internet On & OFF all the time, consider this is no works on this board) Only version v4.0 works! All cards with version v4.1 do not work! No
PCI B/G W-Lan PCI Card Gigabyte Works fine with Ralink drivers. No
USB B/G WUSBP54G v4 Linksys Works with the Ralink RT2500USB driver after editing the kexts according to this thread. No
USB B/G WUSBF54G Linksys ZyDAS ZD1211 Driver, need to edit kexts No
PCI B/G WMP54G v4.0 Linksys Works with the Ralink RT61 + RT2500 driver straight after installation. Only this version v4.0 works! All cards with version v4.1 do not work! No
USB B/G F5D7050 v4000 Belkin ZyDAS chipset. Not recognized as Airport, driver Yes
USB B/G F5D7050 v3000 Belkin Unknown chipset. Not recognized as Airport this driver works No
USB B/G DWL-G122 rev C1 D-Link Ralink Chipset, Need use Ralink RT2500/73 USB Driver, First time is OK, after restart found no device and need re-plugin, RT2500ReplugFix cannot solve this problem No
PCI B/G TEW-443PI Trendnet Atheros chipset. Recognized as Airport, support from 10.4.5 IO80211Family.kext, installed with Pacifist No
PCI B/G WG311v2 Netgear Not recognized. No
PCI B/G WG311T Netgear Reconized as Airport right out of the box. Speeds up to 108mb/s. If not recognized try using this method Yes
PCI B/G TP-WN651G TP-Link Reconized as Airport Extreme. Claims speeds up to 108mb/s. Needs plist edit No
Ethernet B/G F5D7233 Belkin External wireless adapter plugs into Ethernet port; needs USB OR AC adapter for power. Easy browser setup...just works perfectly without need to worry about chipsets or patches. Can also be used as a wireless access point or router. Yes
Ethernet B/G F5D7330 Belkin Originally meant as a Wi-Fi gaming adapter for ethernet consoles. Simply plug into the ethernet port, and either 2 USB ports or AC adapter for power. If your network is not open (HAS an SSID and/or encryption) it must be configured on a Windows PC (the software only works on Windows) to set up the SSID/encryption key. Otherwise, works fine. Yes
PCI B/G DWL-G520 D-Link Atheros chipset. Take IO80211Family.Kext from 10.4.5 combo update. Then shows up as Airport Extreme, or edit AirPortAtheros5424.kext inside of IO80211Family.kext/Plugins and add your DeviceID "pci168c,13" (10.4.8)

I Also had to edit /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist .. set DSDName to en1 and set InterfaceUnit to 1 .. now working fine ..

No
Mini PCI B/G Intel Pro Wireless 2200BG Intel Work with the xKazu & Jalavoui Kext. Currently work only with open network without security WEP/WPA. The driver is still in developpement. http://forum.insanelymac.com/index.php?showtopic=36976 and also http://code.google.com/p/iwidarwin/ No
PCI B/G F5D7001 Belkin Leave out of system for initial JaS 10.4.8 Intel AMD SSE2, SSE3 DVD install. Once OSX installed; shut down, install card. Recognized as airport. Yes
PCMCIA B/G DWL-G630 v.C2 D-Link Add <string>pci168c,001a</string> to /System/Library/Extensions/IO80211Family.kext/Contents/Plugins/AirPortAtheros5424.kext/Contents/Info.plist. After the Kext is modified the card will be recognized as an Airport Extreme. Yes, After the instructions are followed.
Retrieved from "http://wiki.osx86project.org/wiki/index.php?title=HCL_10.4.9&oldid=29346"
Powered by MediaWiki © 2021 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki   |   Privacy policy   |   About OSx86   |   Disclaimers