|
|
Line 562: |
Line 562: |
| !Fully working without patching | | !Fully working without patching |
| |- | | |- |
− | |MiniPCI Express | + | |Place Holder |
− | |A/B/G 108Mbps | + | |Place Holder |
− | |AR5BXB6 | + | |Place Holder |
− | |Atheros | + | |Place Holder |
− | |Works as Airport Extreme | + | |Place Holder |
− | |Yes | + | |Place Holder |
− | |-
| + | |
− | |PCI
| + | |
− | |B/G
| + | |
− | |WL-138G v2
| + | |
− | |ASUS
| + | |
− | |v2 only! Works as Airport Extreme, add DeviceID 4318 needed.
| + | |
− | |No
| + | |
− | |-
| + | |
− | |PCI
| + | |
− | |B/G
| + | |
− | |WPCI810G
| + | |
− | |Motorola
| + | |
− | |Works as Airport Extreme. You need to read the forums (Doesn't work. Nothing show in network (Intel D945GTP Board).)
| + | |
− | |No
| + | |
− | |-
| + | |
− | |Mini PCI Express
| + | |
− | |B/G
| + | |
− | |BCM4311
| + | |
− | |Broadcom
| + | |
− | |Works as Airport Extreme
| + | |
− | |Yes
| + | |
− | |-
| + | |
− | |PCI
| + | |
− | |B/G/BT
| + | |
− | |PC54g-BT
| + | |
− | |MSI
| + | |
− | |Ralink Technology Card. It works perfectly using wireless 802.11bg and bluetooth!. It connects perfectly (sending/receiving) with my Nokia 6280 mobile using bluetooth (isync, data transfer...).
| + | |
− | |Yes
| + | |
− | |-
| + | |
− | |PCI
| + | |
− | |B/G
| + | |
− | |WMP54g
| + | |
− | |Linksys
| + | |
− | |Used [http://web.ralinktech.com/ralink/data/RTCardBus%20D60-1.0.9.0%20D61-1.0.2.0%20UI-1.2.8.0_2006_08_31.dmg Ralink Drivers]. (Not for Intel D945GTP Board.Keeping the internet On & OFF all the time, consider this is no works on this board) Only version v4.0 works! All cards with version v4.1 do not work!
| + | |
− | |No
| + | |
− | |-
| + | |
− | |PCI
| + | |
− | |B/G
| + | |
− | |W-Lan PCI Card
| + | |
− | | Gigabyte
| + | |
− | |Works fine with Ralink drivers.
| + | |
− | |No
| + | |
− | |-
| + | |
− | |USB
| + | |
− | |B/G
| + | |
− | |WUSBP54G v4
| + | |
− | |Linksys
| + | |
− | |Works with the [http://www.ralinktech.com/ralink/Home/Support/Macintosh.html Ralink RT2500USB driver] after editing the kexts according to [http://forum.insanelymac.com/index.php?showtopic=18035&st=0&p=178297&#entry178297 this thread].
| + | |
− | |No
| + | |
− | |-
| + | |
− | |USB
| + | |
− | |B/G
| + | |
− | |WUSBF54G
| + | |
− | |Linksys
| + | |
− | |ZyDAS ZD1211 Driver, need to edit [ftp://ftp.zyxeltech.de/ZyDAS/ZD1211_USB/Macintosh/ZDA211MacUSB_install_4_5_7_0.dmg kexts]
| + | |
− | |No
| + | |
− | |-
| + | |
− | |-
| + | |
− | |PCI
| + | |
− | |B/G
| + | |
− | |WMP54G v4.0
| + | |
− | |Linksys
| + | |
− | |Works with the [http://www.ralinktech.com/ralink/Home/Support/Macintosh.html Ralink RT61 + RT2500 driver] straight after installation. Only this version v4.0 works! All cards with version v4.1 do not work!
| + | |
− | |No
| + | |
− | |-
| + | |
− | |USB
| + | |
− | |B/G
| + | |
− | |F5D7050 v4000
| + | |
− | |Belkin
| + | |
− | |ZyDAS chipset. Not recognized as Airport, [ftp://ftp.zyxeltech.de/ZyDAS/ZD1211_USB/Macintosh/ZDA211MacUSB_install_4_5_7_0.dmg driver]
| + | |
− | |Yes
| + | |
− | |-
| + | |
− | |USB
| + | |
− | |B/G
| + | |
− | |F5D7050 v3000
| + | |
− | |Belkin
| + | |
− | |Unknown chipset. Not recognized as Airport [http://www.ralinktech.com/ralink/data/RTUSB%20D70-1.1.3.0%20D71W-1.1.7.0%20UI-1.3.0.0_2006_11_10.dmg this driver] works
| + | |
− | |No
| + | |
− | |-
| + | |
− | |USB
| + | |
− | |B/G
| + | |
− | |DWL-G122 rev C1
| + | |
− | |D-Link
| + | |
− | |Ralink Chipset, Need use Ralink RT2500/73 USB Driver, First time is OK, after restart found no device and need re-plugin, RT2500ReplugFix cannot solve this problem
| + | |
− | |No
| + | |
− | |-
| + | |
− | |PCI
| + | |
− | |B/G
| + | |
− | |TEW-443PI
| + | |
− | |Trendnet
| + | |
− | |Atheros chipset. Recognized as Airport, support from 10.4.5 IO80211Family.kext, installed with Pacifist
| + | |
− | |No
| + | |
− | |-
| + | |
− | |PCI
| + | |
− | |B/G
| + | |
− | |WG311v2
| + | |
− | |Netgear
| + | |
− | |Not recognized.
| + | |
− | |No
| + | |
− | |-
| + | |
− | |PCI
| + | |
− | |B/G
| + | |
− | |WG311T
| + | |
− | |Netgear
| + | |
− | |Reconized as Airport right out of the box. Speeds up to 108mb/s. If not recognized try using [http://forum.insanelymac.com/index.php?showtopic=33089&st=0&p=238508&#entry238508 this method]
| + | |
− | |Yes
| + | |
− | |-
| + | |
− | |PCI
| + | |
− | |B/G
| + | |
− | |TP-WN651G
| + | |
− | |TP-Link
| + | |
− | |Reconized as Airport Extreme. Claims speeds up to 108mb/s. Needs [http://forum.insanelymac.com/index.php?showtopic=40317 plist edit]
| + | |
− | |No
| + | |
− | |-
| + | |
− | |Ethernet
| + | |
− | |B/G
| + | |
− | |F5D7233
| + | |
− | |Belkin
| + | |
− | |External wireless adapter plugs into Ethernet port; needs USB OR AC adapter for power. Easy browser setup...just works perfectly without need to worry about chipsets or patches. Can also be used as a wireless access point or router.
| + | |
− | |Yes
| + | |
− | |-
| + | |
− | |Ethernet
| + | |
− | |B/G
| + | |
− | |F5D7330
| + | |
− | |Belkin
| + | |
− | |Originally meant as a Wi-Fi gaming adapter for ethernet consoles. Simply plug into the ethernet port, and either 2 USB ports or AC adapter for power. If your network is not open (HAS an SSID and/or encryption) it must be configured on a Windows PC (the software only works on Windows) to set up the SSID/encryption key. Otherwise, works fine.
| + | |
− | |Yes
| + | |
− | |-
| + | |
− | |PCI
| + | |
− | |B/G
| + | |
− | |DWL-G520
| + | |
− | |D-Link
| + | |
− | |Atheros chipset. Take IO80211Family.Kext from 10.4.5 combo update. Then shows up as Airport Extreme, or edit AirPortAtheros5424.kext inside of IO80211Family.kext/Plugins and add your DeviceID "pci168c,13" (10.4.8)
| + | |
− | I Also had to edit /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist .. set DSDName to en1 and set InterfaceUnit to 1 .. now working fine ..
| + | |
− | |No
| + | |
− | |-
| + | |
− | |Mini PCI
| + | |
− | |B/G
| + | |
− | |Intel Pro Wireless 2200BG
| + | |
− | |Intel
| + | |
− | |Work with the xKazu & Jalavoui Kext. Currently work only with open network without security WEP/WPA. The driver is still in developpement. http://forum.insanelymac.com/index.php?showtopic=36976 and also http://code.google.com/p/iwidarwin/
| + | |
− | |No
| + | |
− | |-
| + | |
− | |PCI
| + | |
− | |B/G
| + | |
− | |F5D7001
| + | |
− | |Belkin
| + | |
− | |Leave out of system for initial JaS 10.4.8 Intel AMD SSE2, SSE3 DVD install. Once OSX installed; shut down, install card. Recognized as airport.
| + | |
− | |Yes
| + | |
− | |-
| + | |
− | |PCMCIA
| + | |
− | |B/G
| + | |
− | |DWL-G630 v.C2
| + | |
− | |D-Link
| + | |
− | |Add <string>pci168c,001a</string> to /System/Library/Extensions/IO80211Family.kext/Contents/Plugins/AirPortAtheros5424.kext/Contents/Info.plist. After the Kext is modified the card will be recognized as an Airport Extreme.
| + | |
− | |Yes, After the instructions are followed.
| + | |
| |} | | |} |
This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.
Please specify if your card is AGP, PCI or PCI-E.
Also, place chip and board manufacturer in their respective column.
Note: For NVidia users, visit http://www.macvidia.org/ for updated drivers. For NVIDIA CARDS PLEASE SPECIFY IF THE CARD DOES QE/CI. Saying the macvidia drivers work but not specifying QE or CI is a bit misleading.
If you are using the new kernel then download the Titan kext from http://omni.starchaser.org/titan/ to get QE/CI support
Note:These instructions may confuse noobs as they are a bit out of date. As far as i know, the MacVidia drivers do NOT support QE/CI AT ALL. You can use the kexts that come with your OSx86, or the ones from the 10.4.8 Intel update with your card. You may need to replace OpenGL.Framework too. Titan and Natit are merely enablers which make OSx86 think your VGA BIOS card is an EFI Firmware one (as on a real intel mac), and should load before the NVNVDA* kexts. An installer for Natit can be found at [1]. Check the forums for more info.