HCL 10.4.9

From OSx86
(Difference between revisions)
Jump to: navigation, search
(Intel)
(Matrox)
Line 404: Line 404:
 
|-
 
|-
 
!Hardware Name,(VRAM)
 
!Hardware Name,(VRAM)
!Chip-Manufacturer / Board-Manufacturer
+
!Board-Manufacturer
 
!Notes                 
 
!Notes                 
 
!QE / CI
 
!QE / CI

Revision as of 05:25, 29 March 2007

This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for 10.4.9 builds only.

Contents

Motherboards

A comprehensive list of possible Intel chipsets

PLEASE INCLUDE THE SOUTH BRIDGE TOO

AMD


Abit

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

AsRock

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

Asus

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

DFI

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

ECS

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

Foxconn

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

Gigabyte

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

MSI

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

PC Chips

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

Intel


Abit

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

Albatron

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

AsRock

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

Asus

Hardware Name (socket type) Chipset Notes Fully working without patching
P4P800 VM

ASUS Page

Intel 865G GMCH / ICH5 Everything seems to work smoothly, SATA, network and USB. Audio works stereo, but output jack is mic in by default!
  • To fix that (to change it back to the line out) you must modify the file '/System/Library/Extensions/AppleAC97Audio.kext/Contents/PlugIns/AppleAC97CodecAD198x.kext/Contents/Info.plist'
  1. Find the line with <string>ADS75 ADS74 ADS73 ADS72</string>
  2. Change it with <string>ADS75 ADS74 ADS73 ADS72 ADS70</string>
  3. The next step is to load the AppleAC97CodecAD198x.kext
Yes

Biostar

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

ECS

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

Epox

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

Gigabyte

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

Intel

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

Iwill

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

PC Chips

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder

Tyan

Hardware Name (socket type) Chipset Notes Fully working without patching
Place holder Place holder Place holder
  • Place holder
Place holder


Processors

AMD

Model Notes Recognized as Full Work / No Patch
Place Holder Place Holder Place Holder Place Holder

Intel

Model Notes Recognized as Full Work / No Patch
Celeron D 325 Used JaS 10.4.8 SSE2 SSE3 reseed w/Semtex 8.8.1 + JaS 10.4.9 SSE3 patch w/Semtex 8.9.1, it didn't worked well right away (choopy sound and slower GUI) but I set the com.apple.info.plist "<key> Kernel Flags </key>" entry with "<string>fsb=133</string>" and everything went smoothly! Intel Core Solo 2.53 Ghz (right speed) Yes / See Notes


Graphics Cards

Please specify if your card is AGP, PCI or PCI-E.
Also, place chip and board manufacturer in their respective column.

Note: For NVidia users, visit http://www.macvidia.org/ for updated drivers. For NVIDIA CARDS PLEASE SPECIFY IF THE CARD DOES QE/CI. Saying the macvidia drivers work but not specifying QE or CI is a bit misleading. If you are using the new kernel then download the Titan kext from http://omni.starchaser.org/titan/ to get QE/CI support

Note:These instructions may confuse noobs as they are a bit out of date. As far as i know, the MacVidia drivers do NOT support QE/CI AT ALL. You can use the kexts that come with your OSx86, or the ones from the 10.4.8 Intel update with your card. You may need to replace OpenGL.Framework too. Titan and Natit are merely enablers which make OSx86 think your VGA BIOS card is an EFI Firmware one (as on a real intel mac), and should load before the NVNVDA* kexts. An installer for Natit can be found at [1]. Check the forums for more info.

Note: For ATI users, visit http://omni.starchaser.org/ for experimental drivers.

Note: As of right now, all ATI cards with working kexts have severe slowdown issues with nForce3 chipsets. There is no fix for this, save getting editting out your card from the kext or using Quartz Debug to shut off Quartz Extreme. Edit: Just use agpgart to get no slowdowns at all on nForce3. Joblo10

PCI Express


ATi

Hardware Name,(VRAM) Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
Place Holder Place Holder Place Holder
  1. Place Holder
Place Holder Place Holder Place Holder

Intel

Hardware Name,(VRAM) Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
Place Holder Place Holder Place Holder
  1. Place Holder
Place Holder Place Holder Place Holder

Matrox

Hardware Name,(VRAM) Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
Place Holder Place Holder Place Holder
  1. Place Holder
Place Holder Place Holder Place Holder

NVidia

Hardware Name,(VRAM) Chip-Manufacturer / Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
Place Holder Place Holder Place Holder
  1. Place Holder
Place Holder Place Holder Place Holder

AGP


ATi

Hardware Name,(VRAM) Chip-Manufacturer / Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
Radeon X1600 Pro (256MB) Sapphire Works out of the box on an ASUS P4P800-VM MB Yes plus Q2D capable (gives a great speed boost on iWork '06 Pages program) Any Yes

NVidia

Hardware Name,(VRAM) Chip-Manufacturer / Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
Place Holder Place Holder Place Holder
  1. Place Holder
Place Holder Place Holder Place Holder

PCI


Hardware Name,(VRAM) Chip-Manufacturer / Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
Place Holder Place Holder Place Holder
  1. Place Holder
Place Holder Place Holder Place Holder

Mobile


Hardware Name,(VRAM) Chip-Manufacturer / Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
Place Holder Place Holder Place Holder
  1. Place Holder
Place Holder Place Holder Place Holder

Sound Cards

Hardware Name Manufacturer Notes Fully working without patching
AC97 6-channel audio codec S/PDIF out interface(ADI 1980) Realtek Must patch to get the sound on line out instead of mic in:
  • Edit the /System/Library/Extensions/AppleAC97Audio.kext/Contents/PlugIns/AppleAC97CodecAD198x.kext/Contents/info.plist
  1. Find the line with <string>ADS75 ADS74 ADS73 ADS72</string>
  2. Change it with <string>ADS75 ADS74 ADS73 ADS72 ADS71 ADS70</string>
  3. The next step is to load the AppleAC97CodecAD198x.kext
See notes

Network Cards

Wired (Ethernet)

Hardware Name Manufacturer Notes Fully working without patching
DFE-538TX, Device ID 0x1300 D-Link, Vendor ID 0x1186 Works without problems out of the box! Yes

Wireless

Interface Standard Device Manufacturer Notes Fully working without patching
Place Holder Place Holder Place Holder Place Holder Place Holder Place Holder


Other Expansion Hardware

Hardware Name Interface Device Manufacturer Notes Fully working without patching
Place Holder Place Holder Place Holder Place Holder Place Holder Place Holder
Powered by MediaWiki © 2021 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki   |   Privacy policy   |   About OSx86   |   Disclaimers