Editing HCL 10.5.2

{{10.5.2}}

This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.

* ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work. 
* Please add hardware into tables. 
* This is for 10.5.2 builds only.

''' For how to edit the Wiki, please see [http://forum.insanelymac.com/index.php?s=&showtopic=88125&view=findpost&p=627907 this] thread. Thank you! '''


==Motherboards==




=== Abit ===
'''INTEL CPU'''
{| class="wikitable" width="100%"
!Hardware Name (alphabetical)ƒ
!Chipset
!Notes
!EFI/Vanilla kernel working
!Fully Working w/o Patch
|-
|AB9 Pro
|Intel P965 & ICH8R
|
* Install Method (1): Leo4All v3
* BIOS Version: 22
* Audio: Works
* LAN: Works
* Install Instructions:
*# Formatted as Fat32 using XP and Acronis (could've used anything), then erased with disk utility in OSX install
*# Installed using Vanilla Kernel, and default SMBIOS selections under customize
*# Complete Install and Reboot
*# Use -v on first boot
*# Used NVKush found [http://diabolik1605.com/DHF/ here]
*# Update to 10.5.6 worked but not fully tested yet (using DSDT Patcher and OSX86 Tools.) Followed the guide [http://ihackintosh.blogspot.com/2008/12/prepare-your-hackintosh-for-updating-to.html here]
-----
* Install Method (2): Kalyway 10.5.2 dvd rom (SATA works - had problems using IDE optical drive)
* BIOS Version: 22
* LAN: Works OOB
* USB: Some problems, solved using USB fix kext (see right ->>)
* SOUND: Onboard works OOB, but requires kext for custom soundcards like M-Audio [http://audio-evolution.com/drivers/ here]
* VID RESOLUTION: Depends on vid card, see [http://insanelymac.com/forum/index.php?showtopic=155477 here] for hd48xx thread!
* Install Instructions:
*# Installed via sata dvdrom (IDE not recognised) found [http://www.greensurfshop.com/brands/Matunas.html here]
*# Seperate Sata HDD formatted (fat32) using Installer and installed onto
*# Vanilla kernel worked fine, don't add or change anything yet at install.
*# Use -v on first boot
|EFI & Vanilla Kernel works
-----
Works out of box!
|No patch needed for LAN
-----
Kalyway USB fix [http://insanelymac.com/forum/index.php?showtopic=117029 here] (if needed)
Get kexthelperB7 to install kexts from [http://cheetha.net/ cheetha.net]
|-
|AB9 QuadGT
|Intel P965 & ICH8R
|
* Install Method: Kalyway 10.5.1 & Combo Update
* BIOS Version: Unknown; Revision: Unknown
* Audio: Works with patch below
* LAN: Unknown
* SATA & IDE: Problem
* Install Instructions:
*# Partitioned as MBR
*# Installed using Vanilla Kernel, and MBR selections under customize
*# Complete Install and Reboot
*# Use -x on first boot
*# Setup First boot in safemode
*# Use kexthelper ([http://www.cheetha.net/Kext_Helper/Software.html here]) to install kexts below
*# Install Sound Driver for Onboard sound from [http://forum.insanelymac.com/index.php?act=attach&type=post&id=6739 here]
|EFI & Vanilla Kernel works
|Audio Needs patching
|-
|AW9D-MAX
|Intel 975X
|
* Install Method:  Leopard-10.5.2-AMD-EFI.iso DVD
* BIOS Version: 15; Board Revision: 1
* Audio: WORKS With AzaliaAudio (from DVD)
* LAN: Both WORK OOB
* SATA & IDE: Works OOB (SouthBridge SiliconImage Driver from DVD used)
*ATI Sapphire 3870 works (if you find the right combination of drivers to install from the DVD...)
| EFI w/ Vanilla Kernel WORKS
|SiliconImage3132.kext has some ownership problems. chmod/chown + reboot makes the pain go away.
|-
|IC7-G
|Intel 875PE
|
* Install Method:  Kalyway 10.5.1 with 10.5.2 KalywayComboUpdate
* BIOS Version: 28; Revision: Unknown
* Audio: Works OOB
* LAN: Works OOB, no auto-detect at starup, need to disconnect and reconnect to work
* SATA & IDE: Works OOB
|Unknown
|LAN has auto-connect problems
|-
|IP35 Pro
|Intel P35 + ICH9R Chipset
|
* Install method: Kalyway 10.5.1 or Retail Mac OS X Server 10.5 DVD w/ PC-EFI & Combo Updater
* Kalyway:
* Install options: Formatted GUID, EFIv8 + Vanilla Kernel
* Updated to 10.5.2 using Kalyway Intel combo update + Kalyway 10.5.2 kernel
* Leopard Graphics Update v1.0 worked with no hassle
* Bios version: 1.4, Rev. unknown
* Bios setup: SATA set to AHCI; EIST: enabled, Disable bit: enabled
* Audio works with: AppleHDAPatcher v1.20 + ncx5 ALC888 dump
* SATA works as AHCI
* IDE status: unknown
* LAN works out of the box
* Firewire works out of the box
* Mac OS X Server:
* BIOS Version: 14
* Audio: Realtek ALC888 HD, AppleHDA patch
* LAN: 2x OnBoard Gigabit LAN, no patch (can't remember controller-name)
* SATA & IDE: 6 Built-In S-ATA ports in AHCI, 2 eSATA ports in AHCI (JMicron), 1 IDE port (JMicron), and 1 floppy port (JMicron). All working.
|EFIv8 + Vanilla kernel
|No; Audio needs patching
|-
|IP35P
|Intel® P35/ICH9 Chipset
|
* Install method: Kalyway 10.5.2
* Kalyway:
* Install options: Formatted GUID, EFIv8 + Vanilla Kernel
* Updated to 10.5.4 from Apple Site + using Kalyway Intel combo update 10.5.3 + Kalyway 10.5.2 kernel
* Leopard Graphics Update v1.0 worked with no hassle
* Bios version: 11, Rev. unknown
* Bios setup: SATA set to AHCI; EIST: enabled, Disable bit: enabled
* Audio: Currently not working
* SATA works as AHCI
* IDE status: Working out of box
* LAN Working out of the box
* Firewire Working out of the box
* Audio: Unknown
* LAN: 1x Gigabit
* SATA & IDE: 6 Built-In S-ATA ports in AHCI, 2 eSATA ports in AHCI (JMicron), 1 IDE port (JMicron), and 1 floppy port (JMicron). All working.
|EFIv8 + Vanilla kernel
|No; Audio Currently Not Working
|-
|IP35-E
|Intel P35
|
* Install Method: Kalyway 10.5.1 & Apple 10.5.2 Update
* BIOS Version: 15; Revision: Unknown
* Audio: Need patch from [http://forum.insanelymac.com/index.php?act=findpost&pid=506854 here] or [http://www.rushessay.com/essay_papers.php essay] or [http://ulysses.phys.wvu.edu/~plasma/spintronics/index.html cheap viagra generic]
* LAN: Works OOB
* SATA & IDE: SATA works OOB, IDE works after install
* Optical Drive: Which one? Any weird problems with installation?
* Shutdown / reboot works only with 10.5.1 - needs custom kernel for 10.5.2, Sleep not tested
|Vanilla & EFI works
|Audio needs patching
|-
|IX38 Roadster
|Intel X38 + ICH9R Chipset
|
* Install Method: BrazilMAC 10.5.0 (Updated to 10.5.2 using Kalyway Intel combo update)
* BIOS Version: 12
* Audio works with: AppleHDAPatcher v1.20 + ncx5 ALC888 dump
* LAN: Works Native
* SATA & IDE: SATA works in AHCI mode. Does not work in RAID mode.
* Firewire works out of the box
|EFI/Vanilla kernel: Not Tested
|No, audio needs patching.
|- 
|[http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NAME=LG-95&fMTYPE=LGA775&pPRODINFO=Specifications&fSEARCHTEXT=LG-95 LG-95]
|Intel 945GC + ICH7
|
* BIOS version: 10, Rev. 1.0 
* Installation (10.5.0) method: [http://forum.insanelymac.com/index.php?showtopic=72493 BrazilMAC method] with [http://netkas.org/?p=41 EFI 8.0] on GPT using [http://forum.osx86scene.com/viewtopic.php?f=16&t=2520 iGuru guide]
* Update to 10.5.2: [http://netkas.org/?p=50 Netkas method]
* Audio (ALC 888): Works with [http://forum.insanelymac.com/index.php?showtopic=36520 skippyretard patch]
* Video (GMA 950): Works with modified AppleIntelIntegratedFramebuffer.kext from [http://forum.osx86scene.com/viewtopic.php?f=16&t=2008 BrazilMAC guide]
* LAN: Works out of the box
* IDE and SATA: Works out of the box
* ACPI: Sleep/Wake/Restart work (Shutdown works half of time)
|Yes
|No, audio and video need patching
|- 
|[http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NAME=LG-95&fMTYPE=LGA775&pPRODINFO=Specifications&fSEARCHTEXT=LG-95 LG-95]
|Intel 945GC + ICH7
|
* BIOS version: 14 
* Installation method: Leo4all v2 (10.5.2) with Vanilla Kernel 9.2.2
* Audio (ALC 883): 2ch only so far. Works with Azalia patch from [http://forum.insanelymac.com/index.php?showtopic=36520 skippyretard]. Tried the 883 kexts from Leo4all v2 install, latest Taruga's 5.1 kext (April 24th, 2008) and [http://www.greensurfshop.com/categories/Wetsuits/ mens wetsuits] skippyretard's 883 pkg with no luck. Linux reconizes ALC883 OK. Maybe the guy up here with an ALC888 has a different mobo revision.
* Video (GMA 950): Works with GMA950 driver from the Leo4all install DVD. QE/CI enabled and no artifacts. Resolution fixed at 1024x768, I changed it editing com.apple.Boot.plist adding <string>"Graphics Mode"="1280x1024@85"</string>. There is some minor mouse blinking when moving over the dock, hardly noticeable.
* LAN: Works out of the box
* IDE and SATA: Works out of the box
* ACPI: Restart & Shutdown works fine so far.
* PROs: Very cheap and compatible.
* CONs: NOT an overclocker motherboard, FSB is locked in the Bios.
|Yes
|No, audio needs patching
|-
|[http://www.uabit.com/index.php?option=com_content&task=view&id=32&Itemid=48&page=1&model=339 Fatal1ty F190-HD]
|ATi Radeon Xpress 1250
|
* Install Method: Kalyway 10.5.1 - 10.5.2 Kalyway Combo Update
* BIOS Version: [http://forum.abit-usa.com/showthread.php?t=125871&page=7 Modded from Abit Forum]; Revision: 17
* Audio: Realtek ALC888, Download Installer [http://forum.insanelymac.com/index.php?act=attach&type=post&id=6739 Here]
* LAN: Works OOB
* SATA & IDE: IDE and SATA full Function OOB however you must use SATA channels in order i.e. miss something plugged in on the first sata channel and the installer will not find anything in channels 2, 3 and 4  and you will get 'IOATAStorage controller' blocking Bus error in verbose mode.
* Optical Drive: LG Sata DVD-RW/RAM drive no problems
* Shutdown works, restart doesn't, Unsure about sleep.
* There is no support  currently for the x1250 integrated graphics.
* PRO:'s Cheap Mobo good features looks amazing and is M-Atx. Overclocks well.
* CON:'s No integrated Graphics but I am using an ATi 3850 HD Card with full QE/CI so no real loss overall its a great little board!
|Yes
|No audio needs patching and onboard graphics don't allow resolution change or QE/CI due to no graphic kext.
|-
|Fatal1ty FP-1N SLI (maybe [http://www.abit.com.tw/page/ru/motherboard/motherboard_detail.php?pMODEL_NAME=Fatal1ty+FP-IN9+SLI&fMTYPE=LGA775 FP-IN9]? there is no "1N")
|
* LGA 775
* NV® NF650i SLI™
|
* Install method:  Kalyway 10.5.2 to a Primary SATA Partition, partitioned through Diskpart in Vista to AF.
* Bios: 14 with SLIC table Patch (this shouldn't matter)
* Audio:  Works OOB, with Jack Sensing working well
* USB:  Seems to work well.  Logitech USB headset works perfectly OOB
* LAN: OOB
* All power functions work OOB
* RAM: All 4GB working perfectly.  Loving my 4Gb Mac
|Yes
|All good
|-
|I-45C
|
* 945 GC / ICH7 
* GMA950
|
* Install method:  Kalyway 10.5.2 to a Primary IDE Disk
* Audio:  Works OOB
* USB:  Seems to work well.  USB keys/HDD OK. Logitech Webcam OK with macam.
* IDE : OK
* SATA : not tested
* LAN: Works OOB (Marvell kext included in Kalyway 10.5.2)
* Video : Works OOB
* Power functions not tested
* RAM: All 4GB working perfectly.
* Price : 40 Euros !!! ;-)
|Unknown
|All good
|-
|I-45CV
|
* 945 GC / ICH7 
* GMA950
|
* Install method:  Kalyway 10.5.2 on 300GB Maxtor IDE
* Processor: Intel Dual-Core E2200 2.2GHz
* Audio:  Works OOB
* USB:  Works OOB. Externall USB HD, USB pendrive, CF card reader, Bluetooth pen.
* IDE : OK. Maxtor 300GB and Philips DVD burner.
* SATA : Works OOB
* LAN: Does not work. Not detected. I installed a 6€�realtek 8139 based card. Worked OOB
* Video : Works OOB (intel GMA950 driver included on Kalyway). Resolutions up to 1280x1024
* Power functions work Ok but not with Vanilla kernel. Sleep works if selected S1 mode on Bios.
* RAM: 1x Kingston 2GB DDR2 667 working perfectly.
* Price : 35€�MotherBoard
|Vanilla kernel works, but power functions not ok. (doesn't resstart nor shutdown)
|LAN doesn't work.
|}
'''AMD CPU'''
{| class="wikitable" width="100%"
!Hardware Name (alphabetical)
!Chipset
!Notes
!EFI/Vanilla kernel working
!Fully Working w/o Patch
|-
|Abit AN-M2[http://www.uabit.com/index.php?option=com_content&task=view&id=32&Itemid=48&page=1&model=384], [http://www.forumdeluxx.de/forum/showthread.php?t=352028 Sammelthread AN-M2 (german)]
|
* NF630a
* NVIDIA® 7050
|
* Install Method: Kalyway 10.5.2, Atkos 10.5.2 AMD, Leo4Allv4.1
* BIOS Version: Abit; Revision: 18
* BIOS setup options: lan bootrom enable; sata->raid->AHCI
* Audio: Works out of the box
* LAN: [http://forum.insanelymac.com/index.php?showtopic=106675&pid=878087&mode=threaded&start=#entry878087 works with this] add 0x054C10DE to IOPCIPrimaryMatch (Info.plist), surfing [http://www.greensurfshop.com online surf shop] ok so far, issues with filezilla
* IDE: Full DMA speed with AppleNforceATA.kext and IOATAFamily.kext from Leo4allv4.1 (MCP67)
* SATA: not fully tested yet (enable AHCI under SATA/RAID)
* USB: ok
* VIDEO: Framebuffer only, no accel
* Shutdown, restart works, sleep not tested
* Install Instructions:
*# Partitioned as MBR
*# Installed using an AMD Kernel, and MBR selections under customize
*# Complete install and reboot
*# Use -s on first boot
*# "mount -uw /" then "passwd" and set a password
*# Delete or move all graphic driver: "cd /SYSTEM/LIBRARY/EXTENSIONS; rm NV*; rm ATI*"
*# "touch /var/db/.AppleSetupDone" finally "exit"
*# Edit /Library/Preferences/SystemConfiguration/com.apple.Boot.plist for your framebuffer screen resolution: <key>Graphics Mode</key><string>1280x1024x32</string>
* Overall: A Cheap and very energy efficient AMD board (17W idle with Sempron1100/1200/0.8V, 2.5HD, PSU)  
|EFI ok
|LAN, IDE needs patching
|-
|} . . . . . . . .

=== Albatron ===
{| class="wikitable" width="100%"
!Hardware Name 
!Chipset 
!Notes
!EFI/Vanilla kernel working
!Fully Working w/o Patch
|-
|PX845PEV Pro
|i845PE Chipset
|
* Install Method: Unknown
* BIOS Version:; Revision: 800 v2
* Audio: Realtek AC97 ALC 655 Working
* LAN: Via Rhine III Working
|Unknown
|Yes
|-
|}

=== AOpen ===
{| class="wikitable" width="100%"
!Hardware Name 
!Chipset 
!Notes
!EFI/Vanilla kernel working
!Fully Working w/o Patch
|-
|I975XA YGD
|i975
|
* Install Method: Kalyway 10.5.1 & Update
* BIOS Version: Unknown; Revision: Unknown
* Audio: Works with ALHC888 and Apple HDA Patcher v1.20
* LAN: Not tested
* SATA & IDE: IDE works, SATA not tested
* Wireless: Atheros 300N works well with RT2860 drive
* -----------------------------------------------------
* 2nd Install Method: Leopard-10.5.2-AMD-EFI 
* BIOS Version: 1.10a
* CPU: Intel Core2Duo T7400 2,16Ghz @ 2,4 Ghz - FSB 185Mhz 
* RAM: 4GB (4 x 1GB DDR2 800Mhz) 
* Graphic adapter: ASUS EN8600T Silent 512MB - NVInstallerV.33.pkg works nice!
* Audio: didn't work with Apple HDA Patcher v1.20 - beta4some861_880Installer.zip worked
* LAN: works
* Installation time for 2nd method 90 minutes 

|EFI works
|Audio needs patching
|-
|i975Xa-YDG
|Intel 975X
|
* Install Method: Kalyway 10.5.2 Intel AMD OSX86
* BIOS Version: 6PG; Revision: 1.09
* Audio: Yes
* LAN: Yes
* SATA & IDE: Yes
* Wireless: None
* CPU: Intel CoreDuo T2400 1,83Ghz @ 2,8 Ghz - FSB 255Mhz 
* RAM: 3GB (DDR2 800Mhz) 
* Graphic adapter: ASUS 3870
* Audio: Yes
* LAN: Yes
| Kalyway customization: Kernel_9.2.2_modin  for USB to work, NATIT_For_X2000_X3000_series for video to work 
| Yes 
|-
|}  .

=== Asrock ===
'''INTEL CPU'''
{| class="wikitable" width="100%"
!Hardware Name 
!Chipset
!Notes
!EFI/Vanilla kernel working
!Fully Working w/o Patch
|-
|ASRock 945GCM-S
|Intel 945gc & ICH7R
|
*Fully working using iAtkos 2.0i, BIOS update not needed (using 1.20); Type "cpus=1" at install. It takes about 5 minutes at boot. 
*Audio, video (Quartz, 1024x768, some mouse tearing) LAN, USB works ok. WLAN using D-Link DWA-520. Dual boot with XP, does not work with Windows 7.
|
|
|-
|Asrock 4core 1333 eSata2
|Intel P31/G31 & ICH7R
|
*SATA and PATA and IDE works
*Onboard Lan works
*Attached Graphics card works fully
*onboard USB 2 works
*Onboard Audio works
*Onboard Firewire does not work
*Floppy Dirve does not work in Mac OS.
|YES
|Needed to install a BIOS update to work.
Firewire needs patch
|-
|Asrock 4CoreDual SATA 
|VIA Apollo PT880Pro/PT894
|
* Install Method: Kalyway 10.5.1 & Kalyway Combo Updater
* BIOS Version: 1.9; Revision: 1
* Audio: Works OOB
* LAN: ViaRhineIl works with Stevo4 Patch
* SATA & IDE: Both work OOB (may need to append SATA ID 0x73721106 into AppleVIAATA.kext for SATA to work on SATA2 board)
|PC-EFI works
|LAN needs patching
|-
|[http://www.asrock.com/mb/overview.asp?Model=4CoreDual-SATA2&s=775 Asrock 4CoreDual-SATA2 ]
|Northbridge: VIA® PT880 Pro/PT880 Ultra - Southbridge: VIA® VT8237S
|
* Install Method: Kalyway 10.5.1 w/TheStevo4 ppf + Kalyway 10.5.3 ComboUpdate
* BIOS Version: 1.9  (2.0 doesn't works)
* BIOS Options: defaults Options
* Audio: ALC888 in & out stereo working (7.1 not tested)
* LAN: ViaRhineII work with [http://rs333l3.rapidshare.com/cgi-bin/upload.cgi?rsuploadid=356858534414984233 this kext]
* IDE: Works, SATA: Works with [http://rapidshare.com/files/135251416/Asrock_4CoreDual-SATA2.pkg.zip.html this PKG] or if you want to inject the kext into you iso file use [http://rapidshare.com/files/135249042/AppleVIAATA.kext.zip.html this kext] and use [http://macosx86.forums-actifs.com/tutoriels-mac-os-x86-f14/faire-reconnaitre-le-sata-a-son-hackintosh-t13.htm this method] for the english users use '''google translation'''
* Sleep, Shutdown & Restart Works with the 10.5.2 Sleep_kernel
|PC-EFI works, NO Vanilla Kernel (VIA Chipset)
|TheStevo4 [http://rapidshare.com/files/123275598/theStevo4.zip Patch], alc888, ViaRhineII and SATA
|-
|Asrock Conroe 1333
|Intel 945GC & ICH7
|
* Install method: Kalyway 10.5.1 or Kalyway 10.5.2
* Install options: Vanilla Kernel, BOOT_efi_mbr
* Updated to 10.5.2 using the original Apple combo update using Devin's procedure on insanelymac [http://forum.insanelymac.com/index.php?showtopic=87078&hl=]
* Updated to 10.5.3 using Kalyway 10.5.3 combo update (had to reinstall discrete nVidia card driver afterward through NVinstaller to get Display Resolution change and QE/CI working again)
* Updated to 10.5.4 using the original Apple update tool without any problems
* Leopard Graphics Update v1.0 normal install, works
* Bios version: P 1.30 (no other firmware later than 1.30 works -tested up to 2.10-)
* SATA + PATA works
* Onboard LAN work
* Audio works with alc_out (2ch out only)
|YES
|Audio needs patching
|-
|Asrock Conroe 1333
|Intel 945GC & ICH7
|
* Install Method: Kalyway 10.5.1 & Update to 10.5.2 following Netkas's guide
* BIOS Version: P1.30; Revision: 1.0
* BIOS Options: CPUMAXID set to disbled
* Audio: ALC888, AFAIK only Azalia 2.1 output
* LAN: Works OOB
* SATA & IDE: Both work OOB
|PC-EFI v8 & Vanilla Kernel work
|No, Audio needs patching
|-
|Asrock Conroe-1333 D667 Rev. A/G 1.03
|Intel 945GC & ICH7
|
* Install Method: Kalyway 10.5.2
* '''Modified BIOS Version: 1.80'''; It's nice to have BIOS 1.80 because it supports latest CPUs
* BIOS Options: Default Options
* Audio: Works without Patches (Except Input)
* LAN: Works OOB
* SATA & IDE: Works OOB
* You can find the Moded BIOS here[http://rapidshare.com/files/107425482/Modified_Asrock_Conroe_1333_BIOS_-_By_Kaly.zip.html]
|PC-EFI & Vanilla Kernel work
|Everything Works Without Patching. Credits go to Kabyl (InsanelyMac) He made the moded BIOS.
|-
|Asrock Conroe 1333 D667
|Intel 945GC & ICH7
|
* Install Method: Kalyway 10.5.1 + Devin 10.5.2 Update method
* BIOS Version: 1.3; Revision: Unknown
* BIOS Options: HPET "Enabled", Execute bit "disabled", Suspend to ram "Auto"
* Audio: Need ALC888 patch but no input
* LAN: Works OOB
* SATA & IDE: Works OOB
|PC-EFI & Vanilla Kernel work
|Audio needs patch
|-
|Asrock ConRoe945G-DVI
|Intel 945G + ICH7
|
* Install Method: Kalyway 10.5.2 SleepKernel EFI8 MBR
* BIOS Version: v1.90
* Audio (ALC888): 2Ch Out Works with AppleAzaliaAudio and [http://wiki.osx86project.org/wiki/index.php/ConRoe945G-DVi KEXT-Edit]
* LAN (R8111B): Works
* SATA & IDE: Works
* Video (GMA 950): Works
|EFI v8 Works
|Audio Needs patching
|-


|-
|[http://www.asrock.com/mb/overview.asp?Model=775V88%2B Asrock 775V88+ ]
|VIA® PT880 chipset
|
* Install Method: Kalyway 10.5.2
* BIOS Version: Unkown
* BIOS Options: Unkown
* Audio: Works OOB. But only the left side of the speaker is working.
* LAN: Needs Via Rhine Driver
* IDE: Works OOB
|Unkown
|-


|Asrock P4i65G
|Intel 865G (North) & ICH5 (South)
|
* Install Method: Leo4Allv2 10.5.2
* BIOS Options: Default options.
* Audio: Need AC97 patch
* LAN: Not Tested
* SATA & IDE: IDE works fine, SATA not tested.
* Also applied ICHx patch and used legacy APCI
|PC-EFI works, no vanilla kernel.
|Audio needs patch
|} 
'''AMD CPU'''
{| class="wikitable" width="100%"
!Hardware Name (alphabetical)
!Chipset
!Notes
!EFI/Vanilla kernel working
!Fully Working w/o Patch
|-
|Asrock 939 Dual-VSTA
|Northbridge: ULi M1695  Southbridge: ULi M1567
|
* Install Method: Zephyroth AMD 10.5.2 Rev.1
* Options: 9.2 kernel
* Audio: unknown, using usb sound card
* LAN: Onboard Not Recognized, using realtek card
* SATA & IDE: use [http://files.filefront.com/AppleVIAATALeopardkextzip/;9672295;/fileinfo.html this kext] for full speed
* No PS/2
|unknown
|Onboard audio,  lan and ps/2 need patching
|-
|Asrock 939Dual-SATA2
|Northbridge: ULi M1695  Southbridge: ULi M1567
|
* Install Method: Zephyroth AMD 10.5.2 Rev.2
* Options: 9.2 kernel
* Audio: ULi M5455
* LAN: ULi 5263
* SATA & IDE (SATA only working from II slot)
|unknown'
|Onboard audio, lan (lan works after install until first reboot then breaks) need patching ('''Works in 10.5.4!'''  See [[HCL_10.5.4#Asrock]] and threads for [http://www.insanelymac.com/forum/index.php?showtopic=156517 LAN driver] and [http://www.insanelymac.com/forum/index.php?showtopic=135191 Audio driver])
|-
|Asrock ALIVE NF6G-VSTA
| NForce 4 (MCP61)
| 
* Install Method: Zephyroth AMD 10.5.2 Rev.1
* Options: 9.2 kernel
* [http://forum.insanelymac.com/index.php?showtopic=77071 IDE/SATA Controller: NForce 430 (MCP61)]
* [http://forum.insanelymac.com/index.php?showtopic=32859 Sound: NVidia HD Audio (ALC888)], IN/OUT/Mic working!
* [http://forum.insanelymac.com/index.php?showtopic=12933 Wired Network 1: NForce 430 LAN (03EF, RTL8201CL PHY)] (random lockups may occur, extra PCI/PCI-E NIC is recommended)
|
* EFI: Yes
* Vanilla Kernel: No (AMD CPU)
|
* Audio, SATA and Network need patching (IDE is slow without the patch)
|-
|Asrock ALiveNF7G-FullHD R3.0 [http://www.asrock.com/mb/index.asp?s=n], [http://www.forumdeluxx.de/forum/showthread.php?s=9010770130ccc38650cc5dfbf3b2aafd&t=368420 Sammelthread ALiveNF7G-FullHD/Ready/720p (german)]
|
* NF630a
* NVIDIA® 7050
|
* Install Method: Kalyway 10.5.2, Atkos 10.5.2 AMD, Leo4Allv4.1
* BIOS Version: Asrock; Revision: 1.10 (5/26/2008)
* BIOS setup options: -
* Audio: Works out of the box
* LAN: [http://forum.insanelymac.com/index.php?showtopic=106675&pid=878087&mode=threaded&start=#entry878087 works with this] add 0x054C10DE to IOPCIPrimaryMatch (Info.plist), surfing ok so far, issues with filezilla
* IDE: Full DMA speed with AppleNforceATA.kext and IOATAFamily.kext from Leo4allv4.1 (MCP67)
* SATA: not tested yet
* USB: ok
* VIDEO: Framebuffer only, no accel
* Shutdown, restart works, sleep not tested
* Install Instructions:
*# Partitioned as MBR
*# Installed using an AMD Kernel, and MBR selections under customize
*# Complete install and reboot
*# Use -s on first boot
*# "mount -uw /" then "passwd" and set a password
*# Delete or move all graphic driver: "cd /SYSTEM/LIBRARY/EXTENSIONS; rm NV*; rm ATI*"
*# "touch /var/db/.AppleSetupDone" finally "exit"
*# Edit /Library/Preferences/SystemConfiguration/com.apple.Boot.plist for your framebuffer screen resolution: <key>Graphics Mode</key><string>1280x1024x32</string>
* Overall: A cheap, stable and energy efficient AMD board (19W idle with AMD 4850e/1200/0.8V, 2.5HD, PSU). Good undervolting-BIOS: 0.8V
|EFI ok
|LAN, IDE needs patching
|-
|Asrock ALiveNF7G-HDReady [http://www.asrock.com/mb/overview.asp?Model=ALIVENF7G-HDREADY], [http://www.forumdeluxx.de/forum/showthread.php?s=9010770130ccc38650cc5dfbf3b2aafd&t=368420 Sammelthread ALiveNF7G-FullHD/Ready/720p (german)]
|
* nForce 630a (MCP67)
* NVIDIA® 7050
|
* Install Method (advanced): Retail Leopard installed with custom [http://forum.insanelymac.com/index.php?showtopic=123841 Pre-Boot CD]
* Kernel: [http://forum.insanelymac.com/index.php?showtopic=139758 Voodoo XNU Kernel 1.0 Rev. A]
* BIOS Version: Asrock; Version: 2.10 (1/7/2008)
* BIOS setup options: -
* Audio: Realtek ALC888, Device ID: 0x055c10de / 0x18490888, [http://forum.insanelymac.com/index.php?showtopic=129058 Legacy AppleHDA for BOOT-132]
* LAN: Realtek RTL8211B, Device ID: 0x054c10de,  Driver: [http://forum.insanelymac.com/index.php?showtopic=125569 nForce LAN driver], working OOTB since 10.5.6
* IDE: MCP67, Driver: [http://forum.insanelymac.com/index.php?showtopic=110817&st=0&p=792518& NForceATAController for MCP67]
* SATA: not tested yet
* Firewire: not tested yet
* USB: OK
* Video: Integrated Geforce 7050 with shared memory, no 
* Shutdown, restart and sleep works (I had to change USB/PS2 standby power jumper)
|EFI ok
|IDE, sound, LAN needs patching
|-
|Asrock ALiveXFire-eSATA2
|Northbridge: ATI CrossFire Xpress 1600 (RD480)
Southbridge: ATI  SB600
|
* Install Method: Zephyroth AMD 10.5.2 Rev.1
* BIOS Version: 2.60+; Revision: Unknown
* BIOS Options: If you want to install on a SATA drive, make sure in the IDE menu, "AHCI" is chosen rather than "Non-Raid" otherwise you may get errors
* LAN: Works OOB
* SATA & IDE: Works OOB
|unknown 
|Audio may need patching
|} . . . . . . . . . . .

=== Asus ===
'''INTEL CPU'''
{|-| class="wikitable" width="100%"
!Hardware Name 
!Chipset
!Notes
!EFI/Vanilla kernel working
!Fully Working w/o Patch
|-
|Rampage Formula
|Intel X48 + ICH9R
|
* Install Method: Kalyway 10.5.2 with SATA Optical drive
* BIOS Version: 0403
* ADI 1988B Audio: works
* Marvell 88E8056 LAN: both port works
* ICH9R SATA: all 6 ports working
* JMicron JMB368 PATA: works (except optical drive)
* USB: all working
* Firewire: not yet tested
* This board works with 9800GX2 on second PCI-E slot using apple's 9800GX2 OpenGL driver when updated to 10.5.5
|EFI working, only 9.2 sleep kernel allow fully functional sleep/wake and shutdown.
|Yes. For Kalyway 10.5.2, update with Kalyway 10.5.3 combo + kernel update, 10.5.4 through Apple update. 10.5.5 not yet tested. Only ToH 9.2 sleep kernel works.
|-
| P5VD2-MX SE
| VIA P4M890
|
* Intel Pentium D 805 Smithfield 2.66GHz, also used Intel Pentium D 935 Presler 3.2GHz with much success.
* Install Method: Kalyway 10.5.2 
* BIOS Version: unknown
*Audio: works after use of OSx86 Tools
* Realtek LAN: works after use of Osx86 Tools (used and old LAN from a Compaq Presario Pentium 2, worked OBO, then downloaded and installed kext for Realtek)
* SATA: comes and goes
* USB: all working 
* Firewire: works fine
* VGA: Nvidia 6200 LE 128MB, installed Titan Driver and EFI strings, got rid of crappy 1024X786 resolution, now running at 1440X900.  XFX 7600 256MB Nvidia card also works but system prefers the older card for some reason. 
|EFI working, Chameleon V8 installed afterwards, Darwin was shaky, had to use Boot123 to get system working
|Not exactly, but Osx86 Tools fixes almost everything.  Just don't try to update to 10.5.6 or 10.5.7. Do not try to update to higher system, tried using Atkos 10.5.5 and iPC 10.5.6, both fail after three reboots.
|-
|P5E Deluxe
|Intel X48 + ICH9R
|
* Install Method: Kalyway 10.5.2 / iATKOS_Si 10.5.5 with SATA Optical drive 
* BIOS Version: 0205
* ADI 1988B Audio: works (kalyway default selection works, iATKOS need patch from [http://forum.insanelymac.com/index.php?showtopic=103602 here])
* Marvell 88E8056 LAN: works (kalyway default selection works, iATKOS need to install the marvel pkg extracted from kalyway dvd)
* ICH9R SATA: all 6 ports working
* JMicron JMB368 PATA: not yet tested
* USB: all working (if system is 10.5.4 or above, 9.2 sleep kernel will not mount any usb device, need 9.5 voodookernel)
* Firewire: not yet tested
|EFI working, 10.5.3 or older + 9.2 sleep kernel allow fully functional sleep/wake and shutdown, otherwise 10.5.4 or above need 9.5 voodoo kernel
|Yes. everything works right out of the box with all default selections with Kalyway. Sounds/Lan need patching if using iATKOS_Si 10.5.5
|-
|Maximus Formula
|Intel X38 + ICH9R
|
* Install Method: Kalyway 10.5.2
* BIOS Version: 1201
* Audio: [http://wiki.taruga.net/tiki-index.php Speaker and Digital Out works] (sometimes have some minor issues)
* LAN: OOB
* SATA & IDE: OOB
* JMicron PATA: OOB
* USB: OOB (May not recognize all USB ports)
* Firewire: integrated VIA VT6308 works but crappy... buy a firewire pci card with VT6306
* Had keyboard error with USB/PS2 adapter, no error using PS2 directly
* Install from dvd sata otherwise "still waiting for root device"
* USB DVD Installation works also
* Updating to 10.5.3 using "software update" does NOT work
* Shutdown does not work properly, fans keep rotating
|EfI & Vanilla Kernel
|yes, except audio
|-
|P5E
|Intel X38 + ICH9R
|
* Install Method: Kalyway 10.5.1 - Install Info Below
* BIOS Version: 303; Revision: Unknown
* Audio: Audio Out works OOB, In doesn't work
* LAN: Works OOB
* SATA & IDE: Both work OOB
* Optical Drive: Which one? Any weird problems with installation?
* Do shutdown, reboot and sleep work?
* Installation Instructions:
*# Combo Update (No Reboot)
*# Kernel Update (No Reboot)
*# Repair Permissions
*# Reboot
*# Apple Graphics Update (No Reboot)
*# New Natit Driver
*# Repair Permissions
*# Reboot
|EFI v8 & Vanilla Kernel
|Yes
|-
|P5W DH Deluxe
|Intel 975X + ICH7R
|
* Install Method: Kalyway 10.5.1/10.5.2
* BIOS Version: 2602; Revision: 1.04G
* Audio: Realtek ALC882M works
* LAN: Marvell 88E8053 both ports work out of box
* SATA: all port works, ICH7R IDE works, Jmicron IDE work
* Onboard WiFi work with realtek 8187 drivers but unstable|
* Onboard FireWire: Both ports (1 backpanel and 1 in case) work OK.
* ez_raid ports work out of the box, natively. Raid0 works natively.
| Yes
| onboard wifi needs patching
|-
|P5QL-PRO
|Intel P43 + ICH10
|
* Install method: iDeneb 10.5.5
* BIOS Version: Pathced 0601 [http://www.osxcores.site50.net/page1/files/P5QL-ASUS-PRO-0601.ROM.zip DSDT FIX].
* Audio: Realtek ALC1200 - work with [http://rapidshare.com/files/130398042/p45audio.zip.html ALCInject.kext & AppleHDA.kext].
* LAN: Attansic L1 - kext from iDeneb disk doesn't work. Use PCI Realtek.
* SATA - OOB.
* IDE - did't test.
* ACPI (Shutdown, reboot) - work fine.
* Video: nvidia 7300 GT - work with NVinject from iDeneb disk.
|
|
|-
|P5K Deluxe WiFi
|Intel P35 + ICH9R
|
* Install Method: Kalyway 10.5.2, updated to 10.5.3 with Kalyway combo 10.5.3 update, iDeneb 10.5.5
* BIOS Version: 812; Revision: Unknwon
* Audio: Internal AD1988B only stereo out WORKS OUT OF BOX,audio in: works after patching with Taruga AD1988B rev3 Installer. but require to reinstall video.
* LAN1: Realtek  WORKS OUT OF BOX, required to be ON in BIOS for Time machine to work
* LAN2: Marvel Yukon on internal PCIe bus fully works WORKS OUT OF BOX
* WLAN: Does not work, but there exists a patch to get it working
* SATA & IDE: Both SATA controllers fully work, IDE CD-ROMs and DVD-RW work
|EFI & Vanilla Kernel Work
|YES
|-
|P5K-E WiFi/AP
|Intel P35 + ICH9R
|
* '''WORKS OUT OF THE BOX:'''
* ICH9  6x  Sata ports 
* Jmicron  2x  E-Sata ports
* Firewire, USB, COM1
* '''WORKS AFTER PATCHING:'''
* Audio=ad1988b fully working (stereo, 5.1 digital output, microphone,volume control) using taruga's drivers: [http://wiki.taruga.net/tiki-index.php]
* Lan=marvel88e8056
* Wifi=realtek 8187l, configured as ethernet and uses Realtek app.  
* Leopard WIFI drivers now available [ftp://210.51.181.211/cn/wlan/87_Mac10.4_v1309.zip here!]
* '''WORKS FOR SOME/GIVES SYSTEM CRASHES'''
* IDE/PATA works
* '''BIOS SETTINGS (Update to latest 1004 or 1006):'''
* Set HDD-controllers 'ich9/jmicron' to AHCI mode, powerstate=S3
* Processor: Enable apic2.0, disable speedstep, disable c1e, enable VT and XT
* 4gb ram working < dependent on BIOS settings, read the forum if you have kernel panic!!! 
* '''Install method easy:'''
* Kalyway 10.5.1 Install DVD 'select right patches, try MBR if GUID fails'
* Updated to 10.5.2 using Kalyway ComboUpdate and kernel update.
* Updated to 10.5.4 using software update (vanilla 9.4 kernel works great, sleep works, everything works :D)
* iATkOS users use this [http://forum.insanelymac.com/index.php?showtopic=69132 thread]
* '''Another Install Method (that I used after the easy method failed for me):'''
* Kalyway 10.5.1 Install DVD 'deselect everything except vanilla kernel, and MBR'
* Immediately update to 10.5.3 using Kalyway ComboUpdate, following its instructions closely (meaning apply kernel update before rebooting)
* Immediately update to 10.5.4 using software update (vanilla 9.4 kernel)
* Then install drivers like NVInstaller v.52 (if you have an nvidia video card) or audio drivers, etc.
* '''Install method advanced:'''
* Retail-Leopard-DVD, GUID, pc-efi8, with retail kexts 'remove appleintelcpupowermanagment.kext, add dsmos.kext', only AUDIO/LAN/VIDEO.kexts needs to be added after that, also may add applesmbios.kext for showing right info in system profiler.
* Retail-Leopard 10.5.2 + graphics update also work. see netkas.org for howto
|YES
|On DVD (Kalyway) or patch (iAtkos)
|-
|P5K Premium/WiFi-AP
|Intel P35 &Intel ICH9R
|
* Kalyway 10.5.2
* Version 0802 
* ADI AD1988B, AzaliaAudio only back connection 
* RealtekRTL8110SC & Marvell88E8056
* SATA works, IDE Works not as good
* HP dvd1070, works out of the box. all burning features working
* Restart and Shut down working out of box, sleep with newer version of kernel
|yes
|USB(memory sticks and cards) issues: only reads if was installed at start up.
|-
|P5KC
|Intel P35 & ICH9
|
* Install Method: Kalyway 10.5.1 and 10.5.2 Combo Updater
* BIOS Version: 2602 or 0903; Revision: Unknown
* Audio: ACL883 Tarugas patch or ALC883 driver on install DVD 
* SATA & IDE: SATA works, IDE not tested
* LAN doesn't work.
* Onboard WiFi works
* For some people, install the new kernel before the update
|EFI & Vanilla Kernel
|No. LAN doesn't work
|-
|P5K
|Intel P35 + ICH9
|
* Install Method: Kalway 10.5.1 - upgraded to 10.5.2
* BIOS Version: Unknown; Revision: Unknown
* Audio: Using onboard with ALC883 installer
* LAN works with [http://forum.insanelymac.com/index.php?act=attach&type=post&id=25427 this] driver (maybe hangs after sleep)
* SATA & IDE: SATA works, in AHCI Mode
Stable having flashed P5KR bios 403 on P5K using AFMotherboard ModelUDOS /N to force ICH9 into AHCI mode
Now running for week stable with MAXMEM = 3072 in boot.plist, kept crashing without this option with 4GIG of RAM
|EFI & Vanilla Kernel
|Audio and LAN need patching
|-
|P5K EPU
|Intel P35 + ICH9
|
* Install Method: Kalway 10.5.2
* BIOS Version:; Revision: Unknown
* Audio: Using onboard with ALC883 installer. Inline/mic don't work, 5.1 channels works. All channels works with AppleHDA patcher method.
* LAN: OOB
* SATA : OOB
* FireWire : OOB
* USB : OOB for all 8 USB ports
* Optical Drive: sata Samsung generic DVD-R 
* Shutdown and reboot work, sleep freeze on wake up. Only tested with Vanilla
* 4Gb ram with no problem. 
* Mixing PS/2 keyboard and USB mouse with no problem.
|Yes
|No, sound need patching, use AppleHDA patcher to get all channels input and output.
|- 
|P5K PRO
|Intel P35 + ICH9R
|
* Install Method: Leo4all v.3 and Kalyway 10.5.3 combo update
* BIOS Version:0806 BIOS setting: no changes needed, standard
* Audio: Realtek ALC883 - functional with 883 driver and patched kernel
* LAN: Marvell 88E8056 - functional using SKGE driver
* SATA & IDE: This board uses Marvell IDE driver, so you need to instal both drivers for Intel ICHx chipsets and "VIA Sis Marvell and SB chipset driver". 
* Optical Drive: LG multi format drive on IDE, no problem
* USB - works OOB
* Do shutdown, reboot and sleep work? With Vanilla kernel yes, with patched kernel no. But Vanilla has problem with Core 2 Quad processor.
*
|Yes
|Almost everything works OOB, with patched kernel does not work power management.
|-
|P5K SE
|Intel P35 + ICH9
|
* Install Method: Kalyway 10.5.2 and 10.5.3 Combo Updater
* BIOS: 1008, standard settings
* CPU: manual overclocking possible (45 nm CPU tested)
* Audio: select alc883 kext during install (only tested analog stereo line-out, line-in an mic in: works).
* LAN: Onboard LAN requires installation of the [http://forum.insanelymac.com/index.php?s=&showtopic=40851&view=findpost&p=724044 DaemonES/MadInt driver/package]. If you put your computer to sleep, onboard LAN stops working at wake up. It works again after rebooting.
**PCI-card Realtek RTL8169 works out of box; D-Link DGE530T 1GigE with skge-e.kext (Driver from D-Link website doesn't work).
* SATA: SATA works alright out of the box (as long as you don't enable SATA RAID).
* IDE (and possibly E-SATA) - Marvell chip 88SE61xx - needs patching: [http://my.ukrweb.info/en/node/73 Marvell and others ATA kext for Leopard, by podarok] - works after patch but crashes sometimes during trys to burn a DVD with Toast.
* USB: Works without problems
* USB Booting: Functional, at least after installing with internal SATA connection. Bear in mind that your system may lock up if power settings are configured to turn the HDD off after a certain period of inactivity.
* Optical Drive: IDE, SATA, and USB Optical Drives are supported.
|Yes
|No: both onboard LAN and IDE require patching.
|-
|P5E-VM HDMI
|Intel G35 & ICH9R
|
* Install Method: Kalway 10.5.2
* BIOS Version: 0506
* Onboard Audio works - ALC 883 (S/PDIF not tested yet)
* Onboard Firewire works - VIA VT6308P
* Onboard Video (x3500) works but not accelerated VESA 3.0
* Onboard SATA works, PATA not tested
* HDMI Output not tested yet
* Onboard LAN does not work OOB - Atheros L1 PCI-E Gigabit works with [http://forum.insanelymac.com/index.php?s=&showtopic=40851&view=findpost&p=724044 DaemonES/MadInt driver/package].
* Onboard RAID does not work out of the box
* Shutdown and Reboot works perfectly, Sleep does not work
* Startup welcome movie works
* USB 2.0 ports working (BIOS: Advanced > USB Configuration > Bios EHCI Hands-off "disabled")
* Used Vanila Kernel
|EFI working
|Everything but LAN is working
|-
|P5E-VM DO
|Intel Q35 + ICH9DO
|
*Install Method: Kalyeay Leopard 10.5.1, manual Update 10.5.2 kalyway combo update, 
*BIOS revision: latest, BIOS settings for stock/vanilla kernel with sleep mode bit problem])
*Audio: Realtek® ALC883, 8-channel High-Definition Audio CODEC: works out of the box, some problem after 10.5.2
*LAN: Intel® 82566DM PCIe Gigabit LAN controller: not work patch unavailable
*SATA: works out of the box
*IDE: no test
*onboard USB to front:works out of the box
*onboard USB to back: works out of the box
*onboard Intel® Graphics Media Accelerator 3100 (Intel® GMA 3100) integrated: not used)
|no kernel vanilla patch apply and works well
|some problem with network card intel pro 100 auto disconnect after computer stan-by usb device storage auto unmount. Running  stable in the end!
|-
|P5K-VM 
|Intel G33 + ICH9
|
*Install Method: Kalyway 10.5.2, manual 10.5.3 Kalyway combo update (works), apple 10.5.4 update works
*BIOS 803: latest, BIOS settings standard
*CPU: Overclocking no problem (Wolfdale)
*RAM: 8 GB (4 x 2 GB) DDR2 800 MHz recognized
*Audio: Realtek® ALC883, 8-channel High-Definition Audio CODEC: analogue works out of the box (selected during install, only stereo tested), can't get the front audio panel to work (neither digital nor AC97)
*LAN: Marvell88E8056® PCI-E Gigabit LAN controller: works out of box. I had to use EFI String to get TimeMachine to work, because it can't find the MAC address.
*SATA: All 4 ports work out of the box *need to set SATA mode to AHCI in bios*
*IDE: JMicron® JMB368 works out of the box
*USB: works out of the box. I had to disable PCGenUSB in Kalyway installation to get USB Mass Storage working properly
*Firewire: works out of the box
*onboard Intel® Graphics Media Accelerator 3100 works. With Apple graphics update I tested 1600x1200x32, but resolution must be set with Kernel parameter at boot.
* Software RAID is working using Chameleon
|Yes
|near 100% working out of the box, sometimes does not completely shut down
|- 
|P5B SE
|Intel P965 + ICH8
|
* Install Method: Kalyway 10.5.2
* BIOS Version: 0302
* Audio: Onboard, AzaliaAudio.pkg only 2ch stereo is working
* LAN: Onboard, Attansic L1 Ethernet
* SATA & IDE: SATA works, IDE not testd, can't add another drive
* Optical Drive: HP1070, work out of the box. Originally tried to install with an old ide dvd drive. had to use a SATA 
* shutdown does not shutdown completely. restart works, sleep not tested 
* firewire pci card works out of the box
|BOOT.EFI.V80
|
|-
|P5B Deluxe
|Intel P965 + ICH8R 
|
* Install Method: Kalyway 10.5.1, Upgrade: Kalyway_Hack_10.5.2ComboUpdate
* ComboUpdate method, be prepared for several lengthy reboots. Relax & just let it run.
* P5B Deluxe BIOS Ver.1226
* Audio: AD1988B 8-channel High Definition Audio still not working after update (patches not tested)
* JMicron JMB363 SATA / PATA controller NOT TESTED (2 x External SATA 3.0 Gb/s ports)
* Intel Matrix Storage Technology (RAID) controller not recognized by OS X
* All six (6) SATA 3.0 Gb/s internal ports tested working in ACHI (after upgrade)
* IDE mode NOT TESTED
* Marvell Gigabit LAN Port 1 working; Port 2 still not working (patch not tested)
* All ten (10) USB 2.0 ports working
* All PCI Slots working 
* Both (2) FireWire ports working (TI 1394a controller)
* Partitioned as MBR using EFI bootloader
* TimeMachine working
* Software RAID drives created w/ DiskUtility still working fine after upgrade
| EFI v8 + Vanilla Kernel
| No; Onboard Audio and LAN port 2 need patches
|-
|P5B-E Plus
|Intel P965 + ICH8R 
|
* Install Method: Kalyway 10.5.2
* BIOS Ver. 0627/0633
* Audio: AD1988B 8-channel HD Audio only in Stereo (default patches in Kalyway custom install; BIOS: Advanced > Onboard Devices Configuration > Front Panel Support Type "AC97")
* Internal SATA (x6) ports working in ACHI and RAID
* JMicron JMB363 SATA in AHCI (not PATA)
* IDE mode not tested
* Marvell Gigabit LAN Port working (default patches in Kalyway custom install)
* USB 2.0 ports working (BIOS: Advanced > USB Configuration > Bios EHCI Hands-off "disabled")
* FireWire (kernel/System.kext versions must match)
* Partitioned as MBR with EFI v.8; GUID works as well
* TimeMachine works
* Note: Does not wake up from sleep.
| MBR + EFI + Vanilla Kernel, GUID + Kabyl
| Not quite, but close; Onboard 7.1 Audio only in stereo
|-
|P5B PLUS
|Intel P965 + ICH8
|
* Install method: Kalyway 1.5.1 + Kalyway Combo update
* Onboard audio: Working (With Kalyway audio patch)
* Onboard LAN: not Working
* Sata: full working
* IDE: Works after Install. For boot Sata drive needed.
* Video: Working with Kalyway Nvinject.
|EFI v8 working. Vanilla 9.2.0 working.
|Audio needs Azalia patch
|-
|P5GC-MX
|Intel P965 + ICH8
|
* HD fresh install with GUID using Disc Utility
* iATKOS v1.0i SSE3 with vanilla kernel 10.5.1
* Used PC_EFIv8 for GUID booting
* Updated to 10.5.2 using the original Apple combo update but using Devil's procedure on insanelymac
* Onboard LAN work with driver, download the driver  [http://www.4shared.com/file/93302364/b1e420/AttansicL2Ethernet090219kext.html here]
* Audio works with HDAPatcher ALC883.
|YES
|Audio needs patching, and need a LAN driver .
|-
|P5B
|Intel P965 + ICH8
|
* Install Method: Kalyway 10.5.1, ComboUpdate + Kernel Patches applied in 10.5.1 or "Onetracks perfect install" works with ToH RC2 which is a lot of work
* BIOS: Unknown
* Audio: works after upgrade, needs patch in 10.5.1
* Storage: ACHI working; Install from IDE not working, install to IDE unknown
* LAN: Working
* Partitioned as MBR using EFI bootloader
* Onetrack:
* Audio: Needs editing or patching AppleAzaliaAudio.Kext, audio in not supported
* LAN: Works OOB
* SATA & IDE: Works OOB (JMicron IDE works OTB with Kalyways install Disc, otherwise JmicronATA.kext needs editing)
|EFI & Vanilla Kernel
|No, Patches applied in 10.5.1
|-
|P5KPL-AM
|Intel G31 ICH7
|
* Install Method: iAKTOs_5i
* Audio: works OOB
* Realtek RTL8102EL 100/10 LAN : need driver [http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTypeID=3&GetDown=false#7 here]
* SATA, PATA both works
* USB: all working
* Everything work great after 10.5.6 apple update through "software update" no need change or modify anything LIKE A REAL MAC
|EFI working, Vanilla works
|Yes. need LAN driver.
|-
|P5KPL-AM
|Intel G31 ICH7
|
* Install Method: Kalyway 10.5.2
* Audio: works OOB, only stereo, no mic support.
* Realtek works OOB
* SATA, PATA works OOB
* USB: all ports working OOB
* Video: works OOB (no CI and no QE)
* Sleep, restart, shutdown: Working
* Firewire: not tested
|EFI working, Vanilla works
|Yes, everything OOB.
|-
|P5KPL-VM
|Intel G31 + ICH7
|
* Install Method: Kalyway 10.5.1, Combo Updater, Netkas method
* Bios release: 303
* Audio work
* LAN Attansic/Atheros L1 work with [http://forum.insanelymac.com/index.php?showtopic=40851&st=300&gopid=707720&# DaemonES/MadInt driver]
* GMA3100 Onboard Video: doesn't work
* System Profiler unstable (Need patch from 10.4.10)
|PC_EFI_V8 + Grub, Vanilla Kernel
|No
|-
|P5KPL-CM
|Intel G31 + ICH7
|
* Install Method: Kalyway 10.5.2 (boot with -x)
* Bios release: ???
* PS/2 - working with most recent fix
* SATA - working perfectly, 4 channels
* PATA - working perrfectly, both channels
* Audio - Stereo Out only with AppleAzalia (patched)
* LAN - Atheros not working - using PCI 8139D (no drivers)
* GMA3100 Onboard Video: doesn't work
* System Profiler working perfectly - all values correct
* Sleep/Hibernate - never works - fan always on
|PC_EFI_V8
|No
|-
|P5WD2 Premium
|Intel 955X + ICH7R
|
* Install Method: ToH 10.5 > Apple combo 10.5.1 + ToH 10.5.1 kernel > Apple combo 10.5.2 via  [http://forum.insanelymac.com/index.php?showtopic=87078 this guide] + ToH 10.5.2 kernel
* BIOS Version: 0802 (latest available); Revision: beta
* Audio: Realtek ALC882 - works with Taruga 1.2 patch
* LAN: Intel PCIe Gigabit LAN Controller (integrated) - works OTB; Marvell 88E8001 Gigabit LAN Controller (integrated) - turned off & not tested
* FireWire: Texas Instruments 1394a controller (integrated) - works OTB
* IDE: works OTB; ITE IDE controller (integrated) - turned off & not tested
* SATA: works OTB; Silicon Image 3132 SATA controller (integrated) - turned off & not tested
* Asus WiFi-TV PCI card (optional) - not work
|EFI v8 works
|Audio needs patching
|-
|P5WD2 Premium
|Intel 955X + ICH7R
|
* Install Method: Kalyway_10.5.2_DVD_Intel_AMD; kernel_9.2_speedstep; NVinject-256.
* Audio: Realtek ALC882  Disabled in BIOS during install, but installed drivers anyway.  When system working well, enabled HD audio in BIOS, and it worked.  I call that working OTB 
* LAN: Intel PCIe Gigabit LAN Controller - works OTB; Marvell 88E8001 Gigabit LAN Controller disabled and not tested
* FireWire: works OTB
* IDE: disabled and not tested
* SATA: works OTB; Silicon Image 3132 SATA controller - disabled and not tested
|EFI v8 works.  Vanilla Kernel will NOT work.  
|Yes, so far
|-
|P5B-MX
|Intel 946GZ + ICH7
|
* Install Method: Kalyway 10.5.2
* BIOS Version: 0605; Revision:
* Audio: Audio works with AZALIA by [http://forum.insanelymac.com/index.php?showtopic=36520 skippyretard]
* Onboard video: Not working (causes kernel panic).
* LAN: Works with Attansic driver by [http://forum.insanelymac.com/index.php?showtopic=40851&st=421# DaemonES & MadInt]
* SATA & IDE: Both working
* Requires MBR
|EFI & Vanilla Kernel
|Audio and network needs patching, and onboard video panics system.
|-
|P5GC-MX/1333
|Intel 945GC + ICH7
|
* Install Method 1: Upgraded from Kalyway 10.5.1 to 10.5.2 using /"kalyway_hack_10.5.2ComboUpdate/"; 
*Install Method 2:  10.5.1 retail DVD install with assistance of Boot132 CD (by Kalyway) and then Kalyway 10.5.2 updater
* Onboard LAN: Works with the driver, available for download [http://www.4shared.com/file/93302364/b1e420/AttansicL2Ethernet090219kext.html here].
*PS2 mouse an Keyboard: works out of the box.
*SATA: works out of the box.
*IDE: works out of the box.
*onboard USB works out of the box.
*Power off, sleep: work with proper USB and monitor pin configurations
* Audio works with HDAPatcher ALC883.
*Onboard Video: works at 1024x768 default (but needs patching to get better resolution)
|YES
|Audio needs patching, onboard video needs patching, and LAN needs a driver.
|-
|P5LD2-VM DH
|Intel 945G + ICH7
|
*Install Method: Leopard retail DVD using BrazilMac's way, normal Autoupdates, manual Update to 10.5.2 ([http://netkas.org/?p=50 Netkas' HowTo here])
*BIOS revision: 0702 ([http://incomplete-news.metaparadigma.de/?p=91 BIOS settings for stock/vanilla kernel with sleep mode explained here])
*Audio: ALC 882 chipset ([http://forum.insanelymac.com/index.php?showtopic=32859&st=2780 Works with patch found here])
*LAN: works out of the box
*SATA: works out of the box
*IDE: works out of the box
*onboard USB to front: does not work
*onboard USB to back: works out of the box
*onboard GMA950 graphics: works out of the box (and sleeps! But is analog only! Get a Sapphire ATI HD 2600 XT for this Board :-) )
|Netkas' PC EFI V8 required to use vanilla/stock kernels
|99% working out of the box, besides audio (see left). Running very stable in the end!
|-
|P5LD2-VM SE
|Intel® 945G + ICH7
|
*Install Method: Retail DVD & web update to 10.5.2(Netkas Method)
*BIOS Version: 0602
*Audio ALC 882: Works with patch
*LAN: Works out of the box
*SATA & IDE: Works out of the box
|PC-EFI-V8 + Vanilla Kernel work 
|Audio needs Patching, and couple of kext removed/replaced.
|-
|P5AD2-E Premium
|Intel 925XE
|
* Install Method: Kalway 10.5.1
* Audio: Onboard via Azalia Out
* LAN: Works, WiFi untested
* SATA & IDE: SATA works, IDE unknown
|Kalyway 10.5.1+ 10.5.2 upgrade
|
|-
|P5GPL-X SE
|Intel 915PL + ICH6
|
* Install method: Kalyway 10.5.1, Kalyway 10.5.2 Combo Updater & Kernel Patch
* BIOS Version: 0301
* Audio: ADI1986A - use AppleAzaliaAudio.kext from JaS 10.4.8 DVD (Kalyway 10.5.1 version did not work)
* LAN: Marvell Yukon 88E8001 - use [http://forum.insanelymac.com/index.php?showtopic=15700 Marvell Yukon 88E8001] driver
* SATA & IDE - both work by default
|PC EFI (MBR) works, Vanilla Kernel does not
|No, LAN and Audio Output need patching
|-
|P5P800
|865PE
|
* Install Method: Kalyway 10.5.2 DVD
* BIOS Version:; Revision:
* Audio: Works
* LAN: Works, no jumbo frames
* SATA & IDE: SATA unknown, IDE works
* Optical Drive: LG DVD_RW, works
* Shutdown & Reboot works, Sleep works, but sometimes fail
|No
|With appropriate drivers selected @ installation, the only patch you should find is kalyway 10-5-2 usb patch.
|-
|P4PE-X/TE
|845PE
|
* Installed using JaS 10.5.4 Client/Server
* Audio: Editing proper kext did not help no sound ADI1888
* Ethernet: works with Installed Patch
* USB & ATA work using Patches from JaS DVD
|Using Cemeleon EFI, Using 9.2.0 ToH kernel (SSE2)
|No
|-
|Striker II Formula 
|NVIDIA nForce 780i SLI 
|
* Install Method: Kalyway 10.5.2
* Bios Version: 1303 (2008/05/16)
*Audio: [http://wiki.taruga.net/tiki-index.php 2 Speaker,Digital Out and Mic Works ] (AD1988b_rev3_Installer)
*Lan: not working
*SATA & IDE: works
*FireWire: works
|EFI v8 Works 
| No, overall system is too unstable
|- 
|Striker Extreme
|NVIDIA nForce 680i SLI
|
* Install Method: Kalyway Update combo 10.5.2 + 10.5.2 SSE3 kernel update to fix boot delay and black screen, efi MBR
* BIOS Version:1401
* Audio: SoundMax AD 1988B, working stereo only, no input with AzaliaAudio.pkg installer
* LAN: Marvell Yukon 88E8039, working with nforcedeath, both nics, all CPUs enabled, unstable under load
* SATA & IDE: Does SATA work? Both working flawlessly out of the box (10.5.1 and 10.5.2)
* Optical Drive: Both IDE and SATA drives working. Both optical drives LiteOn models DVD burners
* Shutdown, reboot work flawlessly, sleep hangs computer after update to 10.5.2
* Video card GeForce 7600GT working Quartz Extreme with latest nvinject 0.2.1 had to edit NVDAResman.kext,NVDANV40.HAL,NVDANV30.HAL with device specific ID and remove all other device ID's
|Not tested
|LAN and Audio
|-
|P5N32-E SLI Plus
|NVidia nForce 680i SLI
|
* Install Method: [http://forum.insanelymac.com/index.php?showtopic=87901 Kalyway 10.5.2] and [http://forum.insanelymac.com/index.php?showtopic=109102&mode=linear 10.5.3 Combo Update Package by Mysticus v1.3]
* CPU: Core 2 Quad Q6600 had to edit about this mac strings file to show that in the about this mac window
* Audio: Worked for me OOB, with Kalyway 10.5.2 install disk (on the default driver install setup).
* LAN: Onboard LAN requires installation of the forcedeth driver
**still doesn't work though, shows as always being unplugged
**used a D-Link DFE-530TX+ PCI Adapter and that worked fine
* SATA: SATA works alright out of the box (as long as you don't enable SATA RAID) but freezes sometimes
**suspects it's because the nforce drivers are still buggy
**UPDATE: if your system has more than 3 GB of RAM, see if booting with the kernel param 'maxmem=3072' fixes the problem.  [Using Kalyway 10.5.2, at least, it fixed the problem on at least one system.  Perhaps the SATA driver only uses 32-bit addressing for DMA???]
* IDE: works
* USB 1 and 2: works but not able to mount usb drives until after you install the 10.5.3 combo update, don't select PCUSBGen fix, not needed
* USB Booting: not sure
* Optical Drive: SATA and USB Optical Drives are supported after 10.5.3 combo update installed
* Graphics: 
* Nvidia 8600GTS 256 MB with nvinject 256 option selected with full Quarts Extreme and Core Image support (QE/CI)
* Nvidia 8800GT 512MB; works with full support with Nvinject 512, with dual monitors.
|No: select nforce kernel 9.2.0 following guide posted with efi enabled and when using combo update of 10.5.3
|No
|}
'''AMD CPU'''
{|-| class="wikitable" width="100%"
|-
|M3A78-T
|AMD 790GX+SB750
|
* Install Method: iDeneb 10.5.5
* BIOS setup options: Enabled AHCI
* BIOS Version: 602
* Audio: Works , Realtek ALC1200 (AppleAzaliaAudio) WORK PERFECT FOR ME.  
But if you have problems you can use this Kext [http://forum.insanelymac.com/index.php?act=attach&type=post&id=37201]
* Network: Onboard Marvell 88E8056 Gigabite LAN. Working Perfect
* SATA HD and DVD ROM: Work Perfect
* USB: all working
* Firewire: Not Tested

|EFI v8 Works
|Audio and LAN Working Perfect'''
|-
|M3N-HD/HDMI
|Nvidia nForce 750a SLI
|
* Install Method: Kalyway 10.5.2
* BIOS setup options: Enabled AHCI
* BIOS Version: 1301
* Audio: Works , Realtek ALC1200 (AppleAzaliaAudio) use this Kext [http://forum.insanelymac.com/index.php?act=attach&type=post&id=37201]
* Network: Onboard Atheros F1 Phy Gigabit (Not Tested) Belkin G Plus MIMO USB Network Adapter (RUN PERFECT)
* SATA & IDE: Work Perfect
* USB: all working
* Firewire: Not Tested

|EFI v8 Works
|LAN no tested but Belkin G Plus MIMO USB Network Adapter Run Perfect, Audio Works , Realtek ALC1200 (AppleAzaliaAudio device id modificate)'''
|-
|Crosshair AM2
|NVIDIA nFocre 590 SLI MCP55
|
* Install Method: Zephroth AMD SSE3 9.2.0 Kernel
* BIOS Version: 0702; Revision: Unknown
* Audio: Works with AzailiaHD from install DVD
* LAN: Doesn't Work - OSX detects them with Forcedeth and they have MAC addresses however they will not detect Ethernet cables
* SATA & IDE: Both Work
* To avoid "Still Waiting for root device," have an IDE HD and optical drive plugged in and install on SATA
* Needs boot hang fix if using GUID - same as Asus A8N-E NFORCE4
|EFI v8 Works
|LAN doesn't work, Audio needs patching (reinstall AzailiaHD after 1st boot)
|-
|M2N-E
|NVIDIA nForce 570 Ultra MCP
|
* Install Method: LEO4ALL v3 10.5.2 AMD SSE3 9.2.2 Kernel .
* BIOS Version:  1202; Revision: Unknown.
* Audio: ADI 1988 HD Audio Device; works with Azalia driver installed from dvd.
* LAN: Not tested.
* SATA & IDE: SATA works with Nforce Test driver from dvd; IDE Not tested.
| EFI Worked.
| No, audio,sata needs patching,slow boot (aprox. 3-4 minutes) .
|-
|M2N-X
|NVIDIA nForce 520 MCP
|
* Install Method: Kalyway 10.5.2 AMD SSE3 Sleepykernel .
* BIOS Version:  0701; Revision: Unknown.
* Audio: MCP65 HDA, line out works perfectly with AppleHDA removed and device/vendor IDS added to AzaliaAudo kext
* LAN: Not tested.
* SATA & IDE: SATA works with Nforce MeDevil driver from dvd; IDE works perfectly.
| EFI Worked.
| No, audio,sata and AMD patch 1 used, but all required patches apart from audio already on disk.
|-
|M2N32-SLI Deluxe
|Nforce 590 SLI MCP
|
* Install Method: Leo4All-10.5.2 PPFv1 Universal AMD/INTELSSE2/SSE3 9.2.0 Kernel
* BIOS Version: 1802; Revision: Unknown
* Audio: ADI AD1988B SoundMAX, Azaila Driver From DVD
* LAN: Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0e (Integrated), RTL8187 Driver From DVD
* SATA & IDE: It Will Install On IDE or SATA
* Optical Drive: SATA LG DVD Burner | Had to hook up IDE DVD-Rom to install (removed IDE Rom after install and everything works fine) 
* AMD-Patch From DVD
|EFI Worked 
|The integrated LAN does not work out of the box.  (Did not try to fix this, because on board wireless worked with patches applied during install.  No post-install patches applied.
|-
|M2N-E SLI
|NVIDIA nForce 500 SLI MCP
|
* Install Method: Zephyroth 10.5.2 AMD SSE3 9.2.0 Kernel
* BIOS Version: 0902; Revision: Unknown
* Audio: C-Media 6501 HD Audio Device; works out of the box, recognised as USB Audio Device
* LAN: Works with nForce 2/3/4/5 drivers selected in install options.
* SATA & IDE: SATA works (can do flat install to SATA HDD); IDE Works
| EFI v8 Works
| No, lan needs patching
|-
|M2N SLI Deluxe
|NVIDIA nForce 570 SLI MCP
|
* Install Method: Kalyway 10.5.2 AMD
* BIOS Version: 1604; Revision: Unknown
* Audio: SoundMAX ADI AD1988B; Stereo works have not tested surround, Not recognized
* LAN: Nvidia nForce 570 MCP built in dual Gigabit with Marvell PHY works with (nForceLAN.kext)
* SATA & IDE: SATA works (can do flat install to SATA HDD); IDE Works
* Despite being able to setup RAID before OS even starts up. It does not recognize the array.
| EFI v8 Works
| Video (PNY 7600GT 256mb) worked but for full support I had to download and install NVinject despite it being installed from DVD.
|-
|M2N-X Plus
|NVIDIA nForce 430
|
* Install Method: Leo4Allv3 10.5.2 Universal SSE2 SSE3
* BIOS Version: Stock
* Audio: High Definition Audio Azalia (Installed Azalia Driver)
* LAN: Not tested.
* SATA & IDE: SATA Working fine without other packages. Not tested PATA.
* Optical Drive: LG H50N. Working w/o other packages
* Shutdown and restart worked, sleep not tested
* Was looping on the welcome screen (When comes after the backup screen, back to the welcome video). Resolved Typing -s at the Darwin boot prompt and following:
# $/sbin/mount -uw /
# $passwd root 
# it will ask you to enter a new password
# $touch /var/db/.AppleSetupDone
# $reboot
|EFI ran smooth, Installed 9.2.2 Kernel in a Seagate 160Gb SATA HDD Using MBR to Boot (As default)
|Yes, but LAN (not tested yet)
|- 
|A8N-SLI
|NVIDIA nForce4 SLI
|
* Install Method: Zephyroth 10.5.2
* BIOS Version: 1604; Revision: Beta
* Audio: Realtek ALC850 (Selected AC'97 from Customize list)
* LAN: nForce4 built-in Gbit MAC (Selected forcedeth from Customize list)
* SATA & IDE: Installed OS onto IDE drive without problems. Also have two SATA drives in Striped RAID configured through MediaShield ROM, but the RAID showed up as two individual drives in Mac's Disk Utility during installation. Cannot access RAID even after installation.
* Optical Drive: BenQ DW1625. During the 15 odd times I booted from the DVD to install, after the first 6 or 7 times, the installer started saying that it could not read from the disc. This was happening when it normally would check the media for errors. So, I re-burned a new disc using the same drive of the same ISO(which I had initially created from the original (now problematic) disk). The new disc worked. Maybe, just a very fragile disc. But, weird.
* Shutdown and reboot works. Sleep gives a blank (black), unresponsive screen. Have to hard reset.
* Had to run the installation, with the same options, multiple times for it to get it right. After a few installs, I was getting the gray screen asking me to restart the computer. I really don't know how I got around that problem. I just installed again without changing any options. Finally, when it worked, I had my ethernet cable unplugged. In the Customize list, I had chosen the nforce chipset 2/3/4/5 kext, AC '97, forcedeth, nvidia geforce 10.5.2 and nvinject 128 MB for my 6600GT graphics card. Name of volume: Leopard. I chose the EFI v8 plus MBR bootloader to make the "Leopard" volume bootable. I'm using grub to choose between my various OSes. '''SSE3 9.2.0 TOH Kernel chosen from the Customize list.
* Can only install from same IDE cable (CD and HDD)
|EFI: Since I installed using Zephyroth's 10.5.2, I'm assuming it installs EFI by default?
|Yes, everything works without patching. No flags needed while booting.
|-
|A8N-E
|nForce 4 
|
* Install Method: Leopard 10.5.2 Zephyroth AMD
* BIOS Version: Unknown; Revision: Unknown
* Audio: Install AC97 package on the install menu
* LAN: Install Forcedeth from the install menu
* SATA & IDE: IDE works; SATA not tested
* Install Boot Hang Fix:
*# Boot with the DVD
*# Press F8, then type "-s"
*# Type "cd /usr/standalone/i386"
*# Type "dd if=./guid/boot1h of=/dev/rdiskXsY bs=512 count=1" (X is the disk number and Y is the partition number on which you installed Leo)
*# Type "dd if=./guid/boot0 of=/dev/diskX bs=400 count=1"
*# Type "./startupfiletool -v /dev/diskXsY ./boot_v8"
|EFI v8 Works
|Audio & LAN need patching
|-
|A8N5X
|NVIDIA nForce4 
|
* Install Method: Kalway 10.5.2
* BIOS Version: 0902
* Nvidia 6600 PCIe working with NVinject
* Chose patches: SSE2_Jas1048_ACPI_APIC, AMD_1052_Patch_test_1, and -legacy flag 
* Startup welcome movie played with sound on first boot
|EFI working
|Everything but LAN is working
|-
|A8N-VM
|NVIDIA nForce 410
|
* Install Method: Zephyroth Leopard 10.5.2 for AMD
* BIOS Version: 0902; Revision: Unknown
* Audio: ADI AD1986A works with ALC888 patch and no input
* LAN: Works with Zephyroth patch in installation
* SATA & IDE: Works with Zephyroth patch in installation
* partitioned as MBR
|EFI works
|Audio & LAN need patching
|-
|M2NPV-VM
|nForce430/GeForce 6150
|
* LEO4ALL V2 KALYWAY & ZEPHYROTH
* Disable usb legacy support in bios to work with ps/2 mouse & keyboard
* Graphics working but no qe/ci (install macvidia or remove nvdaresman.kext)
* Audio Working with 2 channel output but no input
* Lan Working 
* SATA Working
*[http://forum.insanelymac.com/index.php?showtopic=83688&hl=m2npv link installation guide for all osx86]
|
|Everything working fine but no qe/ci
|-
|P5V-VM Ultra
|VIA P4M890
|
* Install Method: Kalyway 10.5.1, Combo Updater, & Kernel Patch
* BIOS Version: Unknown; Revision: Unknown
* Audio: Realtek High Definition Audio, ADI AD1986A Soundmax Codec
* LAN: Realtek RTL8201CL
* SATA & IDE: Unknown
|Unknown
|Audio needs patching
|-
|P5VD2-MX
|VIA P4M890
|
* Install Method: Kalyway 10.5.1, Combo Updater, & Kernel Patch
* BIOS Version: 1017; Revision: Unknown
* Audio: ADI1986A; works with Azalia
* LAN: Realtek RTL8201CL; works with viarhine.kext
* SATA & IDE: IDE works; SATA needs patching to appleviaata.kext and add 0x53371106 0x2363197B to the device ID
* Shutdown & Restart fully working, Sleep not tested
|Unknown
|No, audio & lan need patching
|-
|K8V SE Deluxe
|VIA K8T800 (VT8237)
|
* Install Method: Kalyway 10.5.2 (-x -v -legacy options)
* BIOS Version: 1001 ; Revision: Unknown
* Audio: ADI AD1980 SoundMAX (integrated) - does not work, used drivers for PCI Creative card
* LAN: Marvell Yukon 8E8001 (integrated) - works with m.musashi beta driver
* SATA & PATA: Works out of the box
* Optical: Rosewill 16X8 DVD DUAL working, Lite-On LTR-52327S CD-RW working
* Shutdown and reboot work, sleep unknown
* USB: Seen in system profiler, will not mount devices
|Unknown
|No, Audio, LAN, and USB need patching.
|-
|K8V-X
|VIA K8T800 (VT8383)
|
* Install Method: Kalyway 10.5.2 AMD > SSE2 
* BIOS Version: 1001.006
* Audio: ADI AD1980 SoundMAX (integrated) - seems to work but problem with stereo output
* LAN: Marvell Yukon 88E8001 (integrated) - works fine with skge.kext (on Kalyway DVD at installation)
|Untested
|No, Audio not working 100%
|-
|K8V-XE
|VIA K8T890
|
* Install Method: Zephyroth 10.5.2 AMD > SSE3 9.2.0 kernel after Uphuck 10.4.9 1.4a drivers install (USB, Azalia, VIA Rhine)
* BIOS Version: 0703
* Audio: Realtek ALC660 (integrated) - works with Uphuck Azalia patch (not Zephyroth patch)
* LAN: Realtek RTL8201CL-LF 10/100M (integrated) - works with Uphuck VIA Rhine driver
* IDE: VIA IDE controller (integrated) - works with Zephyroth VIA drivers
* SATA: JMicron JMB 363 SATA controller (integrated) - used as storage drive
* Video: NV 7300GT works with NVInstaller V41
* Install Boot Hang Fix:
*# Boot with the DVD
*# Press F8, then type "-s"
*# Type "cd /usr/standalone/i386"
*# Type "dd if=./guid/boot1h of=/dev/rdiskXsY bs=512 count=1" (X is the disk number and Y is the partition number on which you installed Leo)
*# Type "dd if=./guid/boot0 of=/dev/diskX bs=400 count=1"
*# Type "./startupfiletool -v /dev/diskXsY ./boot_v8"
|EFI MBR works
|Audio & LAN need patching
|-
|M2A-VM
|VIA SB600 / ATi 690g
|
* LEO4ALL V3, default kernel in DVD installer - - On AMD 4600+ x2 CPU
* Motherboard BIOS version 1501
* Audio, LAN, SATA 100% out of box
* SATA DVD install works out of box
* IDE DVD-RW (ATA) working with dcat's kext (search Insanelymac.com)
* nVidia Geforce 8600 GT 256mb (works fully with NVInject 0.2.0, using [http://forum.insanelymac.com/index.php?showtopic=82080 this method]
* Had to switch SATA controller to AHCI in BIOS. Warning: Switch this back to IDE if you installed Windows XP on another drive.
* If you use PS/2 Keyboard and Mouse (instead of USB) disable USB legacy support in BIOS Setup.
|N/A
|Everything works 100%, the onboard ATi x1250 card works with Kalyway, probably with LEO4ALL as well.
|-
|M2A-VM HDMI
|VIA SB600 / ATI 690G
|
* Kalyway 10.5.2, Kernels installed: sleepkernel,speedstep - - On AMD 4200+ Athlon X2 CPU
* Motherboard M2A-VM HDMI - No BIOS updates done
* If you have old PS/2 mouse and keyboard - Disable USB Legacy support in BIOS
* LAN, SATA, IDE works 100% out of box
* IDE DVD install on a IDE primary HDD with a SATA secondary drive
* XFX nVidia Geforce 8500 GT 512mb (works like a dream with NVInject 512 selected during install)
* Viewsonic 19' DVI - able to get full native resolution 1440x900@75Hz
* Had to switch SATA controller to AHCI in BIOS. Warning: Switch this back to IDE if you installed Windows XP on another drive.
* Install takes roughly 2 hours. Shutdown and Sleep are working.
|EFI works, Vanilla not supported
|Near perfect combo, Only audio needed patching (Simple installer file available in forum-search ALC882 patch)
|-
|M2S-X
|SiS 756 Northbridge + SiS 965L Southbridge
|
* Install Method: Kalyway 10.5.2 Intel/AMD
* BIOS Version: 0603
* Audio: Works OOB no patch needed since onboard C-Media CM6501 8 ch audio is a USB PnP Audio Device detected as PnP Audio Device by the OS [http://www.cmedia.com.tw/?q=en/USB/cm6501]
* LAN: SiS 190 10/100 Ethernet does not work, installed a cheap Realtek 8139 PCI LAN Card works OOB.
* IDE: OOB Full UDMA Speed
* SATA: Not yet tested
* USB: Has Issues need to connect USB Devices before turning on the system and can't eject a USB Flash Storage Device. Need to Disabled Legacy USB Devices in BIOS.
* Installed using IDE Drive
|EFI Works no Vanilla Kernel
|No
|-
|-
|P5SD2-FM
|SiS 649DX/SiS 966 chipset 
|
* Install Method: Flat Image, ToH Kernel, Kalyway 10.5.2 Combo Update
* BIOS Version:; Revision:
* Audio: Works
* LAN: Works
* SATA & IDE: SATA unknown, IDE works
* Optical Drive: NEC DVD_RW ND-4551A works
* Shutdown & Reboot works, Sleep not tested
|Unknown
|Yes
|-
|M2N68-AM
|NVIDIA nForce 630a/Geforce 7025
|
* Install Method: Kalyway 10.5.2
* Audio NOT working
* Network NOT working
* SATA: Works: Set to AHCI in BIOS
* PATA: works
* USB: NOT working
* Setup a FAT32 partition on the hardisk to transfer files/drivers

Update:
* kernel: voodoo 9.5.0
* Audio working 2 channels with voodooHDA, trying for 5.1 enabling
* onboard nForce gigabit works with forceDeth 
* USB got activated after installing Maxtor Onetouch Firewire drive package for Mac! dont know how.
* Added Asus 9600GSO PCIE x16 512MB card and works with NVEnabler but not with EFI strings or GFX strings from Osx86tools(BTW, must have tool)
| None of the additional drivers have improved device supports on the onboard GPU.
| Tips:
* OS X enhanced graphics QE / CI wont work with onboard GPUs.
* have a few OSx partitions on dedicated HDD and use CarbonCopy to create clones as you step thru each successful hack
|- 
|M2N CM-DVI
|NVIDIA nForce 630a/Geforce 7025 WORK NO FULL
|
* Install Method: Kalyway 10.5.2
* Audio  working
* Network NOT TEST LAN
* SATA: Works: Set to AHCI in BIOS
* PATA: -
* USB:  working, USB MODEM 
* FULL WORKS
| VIDEO: ATI RADEON 3650 256MB WORKS FULL
|-
| M3A78-EMH HDMI
| AMD 780G/ATISB700
|
* Install Method: Ideneb v1.3 10.5.5
* Audio working with Azalia Kext
* NETWORK: working after switching on bios rom set with RealtekR1000 kext
* SATA: working with AHCI in bios
* PATA: not tested
* USB: working fully
* VIDEO: Working with nvinject Geforce 8600GT 512MB
* SHUTDOWN, RESTART: works with shutdown patch
* SLEEP: not tested
* Memory 4GB 4x1GB Kingston
|-
|P4V800-X
|VIA PT800 / VIA VT8237
|
* Install Method: Kalyway 10.5.2
* BIOS Version: Unknown; Revision: Unknown
* Audio: ADI AD1980 AC'97 kext
* LAN: No work
* SATA & IDE: Unknown
* SHUTDOWN, RESTART: working fully
* SLEEP: not tested
|Unknown
|Audio needs patching
| 
|} . . .

=== Biostar ===

{| class="wikitable" width="100%"
!Hardware Name 
!Chipset
!Notes
!EFI/Vanilla kernel working
!Fully Working w/o Patch
|-
|Biostar P35D2-A7
|Intel P35 + ICH9
| 
* Installation: SATA HD fresh formatted with MBR using Disc Utility
* Install method: Kalyway 10.5.1; vanilla kernel (both pkgs) from SATA DVD
* Updated to 10.5.2 using the Kalyway 10.5.2 & Kalyway Kernel updates
* Onboard LAN works out of the box
* Audio works with Linux audio codec [http://forum.insanelymac.com/index.php?act=attach&type=post&id=22525 ALC662] + HDA Patcher.
|EFI v8 + Vanilla kernel
|No; Audio needs patching
|-
|Biostar 945GC-M7 TE
|945GC
|
* Installation: SATA HD fresh formatted with MBR using Disc Utility
* Install method: Leo4Allv2
* Onboard LAN does not work out of the box
* Audio does not work out of the box
* Video GMA950 works out the box without patch (if patched hardware acceleration works but resolutions is stuck)
| Patched Kernel 9.0.0; also Vanilla Kernel
| No, audio and lan both need patching
|-
|Biostar NF61S
|nVIDIA MCP61S(GeForce 6100/nForce 405)
|
* Install Method: Zephyroth AMD 10.5.2 Rev.1
* BIOS Version:; Revision:
* Audio: Unknown
* LAN: Unknown
* SATA & IDE: Unknown
* Optical Drive: NEC 7191S SATA setup as IDE with IDE-SATA bidirect converter adapter (otherwise still waiting for root device message)
|Unknown
|Unknown
|-
|Biostar P4M80-M4
|VIA P4M800
|
* Installation: IDE HD fresh formatted with GUID using Disc Utility
* Installation method: Kalyway 10.5.2
* Onboard LAN needs Rhine kext
* NVidia GeForce 6200 needs Titan kext
|Patched Kernel
|LAN and GeForce patchs
|-
|Biostar P4M890-M7-SE
|VIA P4M890 Northbridge / VT8237A Southbridge 
|
* Installation: WD 320GB IDE HD fresh formatted w/2 partitions with GUID using Disc Utility
* Installation method: Kalyway 10.5.2
* Intel Core2Duo E4300 OC'd to 2.4 GHz/Recognized as Core2Duo 2.4 GHz
* Onboard IDE works OOB
* SATA Not working - Doesn't see my SATA drive with Vista installed
* All USB ports (front & Rear) working / Mounts my external USB Hard Drive
* Full Burn support in all iApps with Pioneer DVD-RW (seen as Apple Supplied)
* Time Machine fully operational w/WD 80GB IDE drive
* Onboard LAN needs Rhine kext
* Onboard Audio needs AzaliaAudio.kext - 2-channel Audio but good 'nuff
* NVidia GeForce 8500GT needs Nvinject kext - Have QE/CI and all resolutions/Refresh Rates & DVI
* Shutdown / Restart / Sleep fully functional
* Been fully operational for a week now w/o a single hiccup
|Vanilla Kernel
|LAN, Audio and GeForce patchs
|-
|Biostar 945GC Micro 775
|945GC
|
* Install Method: iATKOS 2.0i
* Intel Core 2 Duo E2140 1.6GHz @ 1.84GHz (OC'd)
* Audio: Realtek ALC862 (working OOB)
* LAN: Realtek RTL8139 (working OOB)
* SATA working, IDE not tested
* Hitachi Deskstar 160GB SATA-II (Mac) & WD 250GB SATA-II (Vista)
* Shutdown & Reebot works - not waking after sleep
* USB Ports are working
* Stable as a rock
|EFI + Vanilla
|8500GT - Used NVInject 0.2.0
|-
|Biostar P4M800-M7
|VIA P4M800 Northbridge / VT8237 Southbridge 
|
* Installation: WD 80GB IDE
* Installation method: leo4allv3
* Intel Pentium IV 2,8 Ghz
* Onboard IDE works
* SATA Not tested
* USB ports (front & Rear) working
* LG DVD-RW
* Onboard LAN needs Rhine kext
* Onboard Audio needs patch (AC97)- in/out works
* NVidia GeForce 4mx 440 64mb AGP8x needs patch (Natit 1,0 installer) - No QE/ Software CI
* Samsung SyncMaster 206NW - full supported
|No vanilla kernel
|LAN, Audio and GeForce patchs

|-
|Biostar P4M800 Pro-M7
|VIA P4M800 Pro Northbridge / VT8237R Plus Southbridge 
|
* Installation method: Kalyway 10.5.2
* Intel Celeron D 336 
* Onboard IDE Not Tested
* SATA Working
* USB ports (front & Rear) working
* SATA DVD-RW
* Onboard LAN Works Out of The Box (Realtek RTL8201 Chip)
* Onboard Audio (ALC655) works but in MONO mode. [http://www.insanelymac.com/forum/index.php?showtopic=15555 Solution here]. 
* Onboard VGA Works (VIA S3 Unichrome) but doesn't support Quartz Extreme. Only Allows 1024 X 768 as screen resolution. [http://www.insanelymac.com/forum/lofiversion/index.php/t40631.html Follow this thread] to change the resolution.
|No vanilla kernel
|Audio patch

|-
|Biostar TF7025-M2
|Chipset (NVIDIA 7025 and Unknown)
|
* Install Method: SpeedStepKernel + Kalyway
* Audio: Nvidia AC'97 on Kalyway DVD
* Onboard LAN needs R1000.kext
* Some revisions of board use Nvidia MCP67 LAN, not Realtek.  Working using forcedeth-nockd.kext with deviceID 054c10de manually added to the info.plist
* SATA: AHCI mode works for hard drives and DVD drives
* PATA: Optical drive works, but hard drives larger than 128 GB do not
* Optical Drive: NEC Optiarc DVD Burner
* Shutdown and restart works. Sleep works, but causes weird problems with X1950 Pro video card.
* Onboard video does not work
|No vanilla kernel
|LAN, Audio Patches, Use USB fix 1.3.mpkg to fix usb hotplug support
|-
|Biostar TForce 945P
|Intel 945P + ICH7
| 
* Installation: SATA DVD, PATA HD
* Install method: iAtkos 2.0i, vanilla kernel
* Onboard LAN (RTL 8110SC) works out of the box
* Audio (ALC655) Fixed with a plist edit.
|EFI v8 + Vanilla kernel
|No; Audio needs [http://forum.insanelymac.com/index.php?showtopic=24019&hl=alc655+ich7# patching]
|-
|Biostar GF8100 M2+ SE
|NForce 720a (AMD board)
|
* Installation: SATA HD (MUST use AHCI mode or Disk Utility won't see drives)
* Install method: Kalyway 10.5.2, AMD patches and kernel
* Onboard LAN: Realtek 8201CL -- add 0x076010de to Nforce kext
* Audio: ALC662, says it's AzaliaAudio in BIOS but does not work
* Video: Onboard GeForce 8100 shared memory does not work
| Patched Kernel
| No, LAN needs patch, for video and audio you will need supported PCIe/PCI cards
|-
|TA690G AM2
| AMD 690G
|
* Install: Zephyroth Leopard 10.5.2 for AMD EFI
* BIOS Version: R69AMC13
|
|Audio needs patching
|}

=== DFI ===

{| class="wikitable" width="100%"
!Hardware Name 
!Chipset
!Notes
!EFI/Vanilla kernel working
!Fully Working w/o Patch
|-
|DFI X38 LT
|Intel X38
|
* Install Method:: Quad boot portion: Installed XP Pro SP2 first (using acronis to hide other 3 partitions) than Vista (same hiding method) than osx86 than ubuntu with Grub.  OSX86 Method: Kalyway 10.5.1 + Patched Kalyway Update 10.5.2 + Patched Kalyway Kernel 10.5.2 + Graphic Update
* BIOS Version: 1/11/08
* Audio: Works with AppleHD patch and AC885 kext (2.1 and digital and input)
* Video: 8800GT works with Graphic update + nv... latest (google 8800gt osx86 download)
* LAN: Had to install off gigabyte p35 cd and edit for 8052 in the info.plist file
* SATA Support works with AHCI
* IDE Suppport works
* RAID w/ Areca 1210 Working (RAID 0)
|Yes. Fully supported EFI v8 + with Vanilla kernel
|
|-
|LanParty NF4 Ultra-D
|nVidia nForce4 Ultra/SLI Chipset
| 
* Install method: Zephyroth 10.5.2
* Installation: IDE HD formatted with MBR using Disc Utility
* BIOS version: 2006/04/06
* IDE: Works out of the box 
* SATA: Select Nforce 2/3/4/5 chipset driver in install
* LAN: Select LAN drivers in install (Both Nforce & Marvell)
* Audio: Select ac'97 audio driver in install
* Total install time: 14 min
|EFI v8 + ToH 9.2.0 SSE3 kernel
|Yes, as long as you select the appropriate drivers in the installer
|-
|LAN PARTY ULTRA-D nForce4
|nForce 4
|
* Install Method: Zephyroth 10.5.2 V1 for AMD & 9.1.0 Kernel
* BIOS Version: Unknown; Revision: Unknown
* Audio: ALC 850 works OOB
* LAN: Onboard nForce 4 works OOB
* SATA & IDE: Both work
* Optical Drive: LG GSA-H22N BK works
* Optical Drive 2: NEC 2510A works
* Shutdown & Restart works, sleep untested
* Socket 939
|EFI works
|Yes
|-
|LANPARTY UT CFX3200-DR/G Socket 939
|ATI 580X + ULi 1575
|
* Install Method: Kalyway 10.5.2 (need to edit AppleVIAATA.kext and add device values). Updated to 10.5.5 with ASU 
* BIOS Version:
* Audio: ALC 882 works OOB (Selected P5WDH in Installer, use HDAEnabler.kext to get info in system profiler).
* USB: All ports working OOB.
* Firewire: Works OOB.
* LAN: Marvell 88E8053 Onboard Lan working OOB.
* LAN: Marvell 88E8052 Onboard Lan working after adding values to yukon2.kext.
* SATA & IDE: SATA and IDE both working with edited AppleVIAATA.kext
* Optical Drive: Working IDE
* Shutdown Works, Restart and Sleep don't.
|EFI works, using 9.5.0 VoodooXNU RC Kernel.
|Fully Working, but need to manually edit AppleVIAATA.kext on kalyway 10.5.2 install disk.
|} 

=== ECS ===

{| class="wikitable" width="100%"
!Hardware Name 
!Chipset
!Notes
!EFI/Vanilla kernel working
!Fully Working w/o Patch
|-
|P4M800PRO-M (V1.0A)
|VIA P4M800PRO + VIA VT8237R Plus
|
* Install Method: Kalyway 10.5.2 with "sleep" kernel
* BIOS: Unknown (will update later) but I did not have to mess around with any settings to make it work.
* Audio: Realtek ALC655, only works on left channel out of the box. Use kext file from [http://forum.insanelymac.com/index.php?showtopic=15555] and everything works great!
* Graphics: integrated video not tested; using AGP card (128MB Geforce 6600GT) with NVInject 128 which is working great.
* LAN: VIA VT6103L, does not work out of box. Attempted to install VIA Rhine driver, and adapter was recognized....but always got a kernel panic immediately after I tried to setup the adapter! Using a Realtek PCI network adapter instead, works great. I'm just a bit lazy, I am sure there's a way to get the integrated network to work if you really want to.
* SATA & IDE: Both work excellent out of the box!
| not sure?
| No, audio and network need to be patched.
|-
|P4M800PRO-M V2
|Via P4M800PRO, Via 8237R Plus
|
* Install Method: Use Kalyway 10.5.1 Intel Amd DVD. Use 10.5.6 combo update with netkas method. Netkas method works but you MUST enable root user in directory utility and type "sudo su" in terminal first before running the netkas script. Make sure you have voodoo kernel 9.5 installed BEFORE YOU REBOOT. If you have an nvidia card remove all ati*, appleintelgma* video kexts before reboot. IDeneb 10.5.5 also works but do not install any video drivers.
* BIOS: 5/25/2007
* Audio: AC97 stereo fully working with patch, otherwise mono OOB.
* Graphics: Onboard video unknown. Used Geforce 6200 128mb AGP and 7600gs 512 AGP. QE CI supported with NVinject.
* LAN: Works with viarhine.kext, but has dropouts and you have to restart. Use wireless USB adapter.
*Even Fully supported PCI LAN cards Tends to drop out just like the on board, many people are having this problem just with this particular chipset no just the motherboard. Tried many things to get this to work but have not had success, some bios tweaks make it last longer but it still dies from heavy usage.
* SATA & IDE: IDE works, SATA works. USB Works. Time Machine works with toh ionetworkingfamily.kext.
|Vanilla kernels do not work because of via chipset. Installed using MBR. GUID works too on my IDE drive. Dual boots with XP.
|You might have to slightly increase voltage on your memory with this board.  I could not install Kalyway 10.5.2 DVD at first and got an error "Could not validate Base Install". After upping my memory voltage by .20 it worked fine. Depends on memory probably.

LAN dropouts even using a PCI Supported NIC.
|-
|G31T-M
|Intel G31 + ICH7
|
* Install Method: Leo4All_v3 (no other worked)
* BIOS Version: Unknown
* Audio: ALC662 (Only AzaliaOut), HDA-Patcher w/ ALC662.txt didn't work
* LAN: not tested
* SATA & IDE: no problems occured
* Optical Drive: positively tested with SATA & PATA drives
* Shutdown, reboot work
* OnboardGFX not tested
* Only worked with whether cpus=1 or ACPI disabled. Only one core recognized by OSX
* NOT RECOMMENDED
<BR><BR> UPDATE BY SEARAY: YOU CAN USE THIS BOARD WELL IF YOU APPLY BIOS PATCH. SEE 10.5.5 HCL for the fix. It works in 10.5.2 and 10.5.6
|Yes
|No, Sound needs Patching
|- < Make sure this is at the beginning and end of your system, no need for two, just one
|GCT-M/1333 (V3.0)
|Intel 945GC + ICH7
|
* Install Method: EFI_V8 + Retail DVD imaged to USB drive + patched.  Updated to 10.5.2.
* BIOS: 07/11/07 (08/02/18 does not boot)
* Audio: IDT 92HD202: Not working yet.
* Graphics: 945G/P (GMA950): Working, no tearing / artifacts.
* LAN: RTL8101E: Works Native
* SATA & IDE: IDE works, SATA works. No optical drives tested.
|Yes
|Not tested
|-
|GCT-M/1333 (V3.0)
|Intel 945GC + ICH7
|
* Install Method: Kalyway 10.5.2, Vanilla
* BIOS: 07/11/07, must have Execute Disable Bit ENABLED
* Audio: Unknown for onboard, Using USB audio instead
* LAN: Works
* SATA & IDE: Works with either or both, including IDE Pioneer DVR-112D optical drive
* Graphics: Artifacts from onboard. Installed XFX8400GS PCIe with Kalyway NVInject option.  Modified NVCAP for DVI.
* Shutdown, reboot work.  Sleep does not.
* Cheap $20 Firewire and $20 AirLink Wireless N PCI cards work well.
* 2.67GHz Core 2 Duo E6750
* Previous installs with Kalyway 10.5.1 were difficult.  Kalyway 10.5.2 seems much easier for this mb.
|Yes
|Not tested
|-
|GCT-M/1333 (V3.0)
|Intel 945GC + ICH7
|
* Install Method: Kalyway 10.5.2, no options selected
* BIOS: 07/11/07, Execute Disable Bit ENABLED
* Audio: No, IDT 92HD202 HD Audio, previously Sigmatel 9200?, does not work in SLES 10 or Ubuntu 8.04 either
* LAN: Realtek 8101E, works natively
* SATA & IDE: IDE Maxtor HD and Emprex DVD 16x burner work, SATA not tested
* Graphics: Intel GMA 950, only 1024x768, no artifacts
* USB 2GB Jump drive works
* Shutdown, reboot work.  Sleep does not.
* 2.2 GHz Core 2 Duo E2200, Crucial 2GB 800Mhz (detected as 667Mhz) PC6400 CL6
|Yes
|Yes except Audio
|-
|K8M890M-M (V1.0A)
|K8M890 + 237R
|
* Install Method: Zephyroth AMD 10.5.2, AC97, Via Rhine, MBR Bootloader options selected
* BIOS: 9/12/2007, American Megatrends
* Audio: AC97, works
* LAN: VIA Rhine, works with install option checked
* WLAN: Linksys WUSB54G, USB works with prasys drivers
* SATA & IDE: IDE Maxtor 34GB (works), SATA WD 160GB (works), IDELGDVDRW (not fully tested)
* Graphics: Sapphire X1650 Pro PCIe, no artifacts (sometimes multiple res & qe/ci when hacked. trouble.)
* Graphics: Onboard IGP S3, does not work.
* Shutdown, reboot work.  Does not sleep.
* 2.2 GHz AMD Athlon 64 X2 AM2, Crucial 2GB 800Mhz (detected as 667Mhz) PC6400
|Yes
|Yes, except onboard graphics and added vg/wlan cards.
|-
|}
 .

===Elitegroup===
{| class="wikitable" width="100%"
!Hardware Name 
!Chipset
!Notes
!EFI/Vanilla kernel working
!Fully Working w/o Patch
|-
|945gct-m v 3.0
|Intel 945GC + ICH7
|
* Install Method: Kalyway 10.5.2 intel amd sse2 sse3
* BIOS: latest
* Audio: No, Motu Ultralite used instead.
* LAN: works oob, SMB works thank god
* SATA & IDE: both work oob
* Graphics: e-vga nvidea 7300gs 256 mb ddr2, works with /movevideodrivers trick, crashes when 'detect displays'. all resolutions work, multiple displays not yet tested.  
* USB 2.0 works
* Belkin firewire pci card works oob
* Shutdown, reboot work. VERY Slow comes with 512mb of patients 
* 3.07 P4 w/ HT, Crucial 2GB 800Mhz (detected as 667Mhz) 
* FSB running at 533
* xbench score @ 99, with dashboard killed. 
* Logic pro and Final Cut Express 4.0 work
|Yes
|Yes except Audio
|-
|}


=== eVGA ===

{| class="wikitable" width="100%"
!Hardware Name 
!Chipset
!Notes
!EFI/Vanilla kernel working
!Fully Working w/o Patch
|-
|eVGA 780i SLI132-CK-NF78-A1
|nVidia nForce 780i SLI Chipset
| 
* Install method: Kalyway 10.5.2
* Installation: SATA HD w/ GUID 
* BIOS version: P06
* PATA: works (PATA optical disk work during installation)
* SATA: all ports work but unstable when writing/reading medium size files
* LAN: not working (beta driver work but unstable) 
* Audio: ALC888S (works with ALC888 driver)
|EFI v8 + 9.2 sleep kernel 
|No, sleep/shut down not working properly, system randomly freeze under idle/load
|-
|-
|eVGA 680i SLI122-CK-NF68-A1
|nVidia nForce 680i SLI Chipset
| 
* Install method: Kalyway 10.5.1 + Kalyway 10.5.2 combo update + Apple Graphics update 1.0
* Installation: IDE HD w/ GUID 
* BIOS version: P32
* IDE: Works out of the box 
* SATA: read works/no write: nForce driver in the works
* LAN: Marvell 88E1116, beta driver works after unplugging computer. To stop freezing: set cpus=1  
* Audio: Fully working w/ ALC885 codec using Taruga's HDApatcher v1.20
|EFI v8 + modbin 9.2 
|No, patch audio, use PCI Nic for stability, screen saver/restart/shutdown perfect, sleep no good
|-
|eVGA NF41SLI133-K8-NF41-AX
|nVidia nForce4 SLI Chipset
| 
* Install method: Kalyway 10.5.2
* Installation: IDE HD w/ GUID
* BIOS version: unknown
* IDE: Works out of the box 
* SATA: read works/write
* LAN: OOB
* Audio: Fully working OOB
|EFI v8 + sleepkernel
|Yes, screen saver/restart/shutdown perfect, sleep no good
|}  .


eVGA 680i SLI LT
Nforce

*Install method: Kalyway 10.5.2
* Installation: SATA disc and hd
* Bios is most recent as of Dec 2008
* Sata works perfectly, havent tested loads yet.
* Lan: Works with nforce patch but freezes under load even with different card installed. I believe it is a kernel issue. Ideneb 10.5.6 seems to fix it but not completely sure.
* Audio works using azalia, hadnt tried patching using ALC880
Nforce kernel. Sleep broken

=== Foxconn ===
{| class="wikitable" width="100%"
!Hardware Name (alphabetical)
!Chipset
!Notes
!EFI/Vanilla kernel working
!Fully Working w/o Patch
|-
|A76ML-K
|ATI Radeon HD3000 series
|
*IDE: Works
*SATA: No
*Install Method: iPC OSX8x 10.5.6 INTEL/AMD SSE2/SSE3 Universal
*No audio for on board (VIA VT17088). Kernel Panic on installer exit, restart, shutdown, Sleep not yet tested. You MUST disable SATA before installing as it will goto "waiting for root device" error, enable after install is fine.
|-
|MB6497-RS
|SiS964
|
*Install Method: Leo4All v4 Beta (10.5.2)
*Audio: Realtek AC97 ALC655 (Works with [http://forum.insanelymac.com/index.php?act=attach&type=post&id=26624 this] driver)
*Lan: Realtek RTL8201BL (SiS900 chipset, works with [http://forum.insanelymac.com/index.php?showtopic=97690&hl=sis900 this] driver) 
*IDE: Not Tested
*SATA: Works
*Shutdown/Sleep: Works
*USB2.0: sometimes errors
|Vanila not tested
|No
|-
|P9657AB-8EKRS2H
|Intel 965 Express
|
*Install Method Retail DVD + Aple 10.5.2 Combo Update
*Audio Intel ICH8R ( Works with drivers from Kalyway 10.5.1 DVD )
*Lan Works W/ Vanilla Kext
*IDE ( Not Tested )
*SATA Works in AHCI Mode
*Shutdown / Sleep ( Sometimes it will shutdown without issue, other times it may hang for a bit before shutting down )
* Overall Usability ( High )
|EFI V8 GUID/MBR + Vanilla Kernel
|No
|-
|P9657AB-8EKRS2H
|Intel 965 Express
|
*Install Method Patched Leo4All 10.5.2
*Audio - not tested
*Lan Works out of box
*Firewire works out of box
*IDE (jmicron) Works fine after patching DVD
*SATA Works in AHCI Mode
*Shutdown / Sleep No problems shutting down, have not tested sleep
* Overall Usability ( High )
|Leo4All + Vanilla Kernel
|No
|-
|M7PMX-S
|Intel nForce 630i Chipset
|
*Install Method: Kalyway 10.5.2 with Sleep Kernel
*Integrated Video only works with one resolution with NVInject basic drivers (1024x768)
*On-Board HDMI untested, although shows multi-monitor support but only one monitor is connected.
*Audio - not working, needs ALC888 Patch
*Lan does not work. Needs patcher or compatible card
*IDE Works perfect
*SATA untested
*Shutdown / Restart / Sleep No problems shutting down or restarting, sleep doesn't work
*Needs to boot into Single User Mode after install to bypass Setup screen as it crashes on transfer screen.
*Overall Usability ( High )
|EFI V8 + Sleep Kernel Vanilla Kernel not working(infinite reboot loop)
|No, Needs Audio & LAN Patches. Otherwise fully compatible
|-
|C51XEM2AA-8EKRS2H
|NVIDIA nForce 590 SLI
|
*Install Method: Zephyroth 10.5.2 rev.1
*Video: GeForce 8800GTS 640MB works with nvinject
*Audio: ALC882D, not working
*LAN: Marvell 88E1121 Dual 10/100/1000 Base T Enthernet PHY, not working
*IDE: Works
*SATA: Does not work
*Shutdown / Restart / Sleep: No problems shutting down or restarting, sleep is untested
*Overall Usability ( Mediocre )
|EFI/Vanilla not tested
|No, needs patches for Audio, LAN and SATA.
|-
|P45A-S
|Intel P45 Chipset
|
*Will not install. Won't recognize Firewire port and stops installing there.
*Turning off the Firewire port doesn't work, simply causes more errors.
|N/A
|No, not at all.
|}.

=== Gigabyte ===

{| class="wikitable" width="100%"
!Hardware Name (alphabetical)
!Chipset
!Notes
!EFI/Vanilla kernel working
!Fully Working w/o Patch
|-
|[http://tw.giga-byte.com/Products/Motherboard/Products_Overview.aspx?ProductID=2843 GA-EP45-DS3]
|Intel P45 ICH10
|
* Note from someone else: I found this entry to be misleading about the audio chipset. Use the next one. You only need the two kexts from Taruga: HDAEnabler.kext, and ALC888 Address 2 AppleHDA.kext. You don't have to deal with any Linux dump. Putting the kexts in the EFI partition did not work since they had dependencies in the original kexts. 
* [http://forum.insanelymac.com/index.php?showtopic=133683  DSDT patch] & [http://forum.insanelymac.com/index.php?showtopic=132757 ChameleonSM] for pure vanilla setup.
* [http://forum.insanelymac.com/index.php?showtopic=86167 Install Method: Chameleon + Retail Method] - SATA AHCI Mode
* Bios revision F8 (current)
* All 6 SATA detected as Generic AHCI - Need to add Device ID to AppleAHCI for correct detection (3a228086)
* JMicron JMB368 IDE: Detected not tested yet. (197b2368)
* Dual Gigabit OOB (10ec8168 rev 02)
* Firewire OOB (Texas Instrument TSB43AB23 (104c8024)
* All USB OOB
* Audio: ALC885 (3a3e8086 rev 02)[http://forum.insanelymac.com/index.php?showtopic=124794&st=20 Internal/Microphone working with this guide]
* Used with Quad Xeon X3320
* Shutdown/Restart: [http://store.psystar.com/opensource/openhaltrestart Psystar OpenHaltRestart]
|ChamelelonEFI + Vanilla Kernel
|No - [http://forum.insanelymac.com/index.php?showtopic=124794&st=20 Audio need to patch.]. 
----
'''[http://forum.insanelymac.com/index.php?showtopic=133683 New DSDT Method]''' :- run the DSDT Patcher with -newHPET from terminal, edit the dsdt_fixed.txt in Debug Folder (search and replace 'AZAL' with 'HDEF') recompile the dsdt-fixed.txt (iasl dsdt_fixed.txt), copy the dsdt.aml to / - copy the [http://forum.insanelymac.com/index.php?showtopic=86167 chameleonsm] (cp chameleonsm /boot). Before reboot remove/backup all patched kext files, run "kextcache -a i386 -m /Extra/Extensions.mkext /System/Library/Extensions/". Now you can safely reboot..
----
A simple sed for changing AZAL to HDEF -> sed -i 's/AZAL/HDEF/' yourfile . Then you can run -> grep HDEF yourfile" - to see if the changes are made.
|-
|GA-EP45-DS3L
|Intel P45 ICH10
|
* Install Method: KALYWAY and IATKOS 10.5.2 works perfectly (need to set to AHCI in BIOS and install in first partition of drive).  RECOMMENDED METHOD: Also works perfectly with RETAIL DVD or existing Leopard volume using Chameleon install method combined with LS8 patch pack (see links below).
* Audio: Works perfectly with linux audio codec dump (see linked file) and Taruga's 3 files HDApatcher, HDAEnabler.kext, and ALC888 Address 2 AppleHDA.kext (to have full bass use AppleHDA.kext that is modded using limini's method)
* LAN: onboard works only with SMB, AFS, and bonjour not reliable, use the card mentioned [http://forum.insanelymac.com/index.php?showtopic=135948 here]
* All 6 SATA AND 2 IDE Ports work perfectly OOB, including both kinds of SATA/IDE hard drives and optical drives. Need to set ACHI setting in BIOS before install. USB2 Ports work perfectly.
* ICH10 working OOB
* WORKS OOB: Shutdown, Sleep and Reboot. Retail install needs patch [http://forum.insanelymac.com/index.php?showtopic=135948 here]
* Core 2 Duo 3Ghz E8400 processor working perfectly, add-on Bytecc Firewire card working OOB. Palit NVidia 8600 card working perfectly. Running Leopard 10.5.5
* Great overclocking board. Overclocked at 3.6Ghz with stock Intel cooler. Overclocked at 3.87Ghz with add-on Scythe Shuriken CPU cooler. XBench score of 216. 1720 Mhz Front-Side Bus. 30% faster than the iMac 3.06Ghz Extreme, even for the graphics surprisingly! The overclocked front-side bus elimanates most of the system bottlenecks.
* 30 successful installations reported for this new Gigabyte motherboard.
* Comment by one user (most don't have this problem): I had to perform entire installation process with only 1 piece of RAM. I wasted several hours dealing with incredible slowness before I figured this out.
----
* for more info visit:
* [http://forum.insanelymac.com/index.php?showtopic=135948 RETAIL DVD with 10.5.5 &10.5.6 install with all kexts and audio downloads for this exact board]
* [http://forum.insanelymac.com/index.php?showtopic=86167 Method for RETAIL DVD install or existing authentic Leopard volume]
* [http://forum.insanelymac.com/index.php?showtopic=112708&hl=ep35+ds3l Bios Settings, and other installation info]
* [http://forum.insanelymac.com/index.php?showtopic=77165 LS8 patch pack. Additional fine-tuning patches for after Kalyway and Retail DVD installs - For Gigabyte motherboards]
* [http://forum.insanelymac.com/index.php?showtopic=123699 Troubleshooting discussion thread for installing on this motherboard + CODEC DUMP FILE]
* [http://forum.insanelymac.com/index.php?showtopic=123697 Troubleshooting discussion thread for post-installation problems on this motherboard]
* [http://wiki.osx86project.org/wiki/uploads//0/00/AppleHDA.kext.zip AppleHDA.kext that is modded using limini's method for full bass]
* [http://www.cheetha.net/Kext_Helper/Software.html Kext Installer Application for Taruga and other patches]
|YES: ChameleonEFI or KalywayEFI, + Vanilla kernel
|No. Need to install Audio patch. Very easy to do. Use also LS8v12 kext patch installer for this board for optimal performance. If installing 10.5.5 Leopard update, you must install 10.5.4 first along with LS8 patch pack before the 10.5.5 update. Avoid NVinject kext since it may not be compatible with all NVidia graphic boards (NVinject may cause bootup crash), use the proven LS8 pack instead.
|-
|GA-EP45-DQ6
|Intel P45 ICH10
|
* Install Method: You can use the same [http://forum.insanelymac.com/index.php?showtopic=77165  LS8_install_pack] as for the P35-DS4
* Audio: ALC889A works (In/Out/Mic/SPDIF) with patch AppleHDA.kext
* LAN: all 4 LAN work w/ vanilla kext, need RTL1000.kext for AFP/Bonjour
* Purple SATA port (gigabyte SATA) Works w/ vanilla AppleAHCI.kext
* Orange SATA port (ICH10) will need a patch IOATAFamily.kext
* Raid on ICH10 working with ChameleonEFI
* IDE Works
* WORKS: Shutdown, Sleep and Reboot
----
* for more info visit:
* [http://forum.insanelymac.com/index.php?showtopic=115121 GA-EP45-DQ6 Thread]
* [http://forum.insanelymac.com/index.php?showtopic=77165 LS8 Install Pack Thread]
* [http://forum.insanelymac.com/index.php?showtopic=76404 karaakeha's RAID guide]
|ChameleonEFI + Vanilla kernel
|No
|-
|GA-EP45-DS4P
|Intel P45 ICH10
|
* Install Method: Kalyway 10.5.2. Upgrade to Kalyway 10.5.3. Used Software update to go to 10.5.4
* Audio: ALC889A works (In/Out/Mic/SPDIF) with Taruga's new AppleHDA enabler and HDAudio.kext
* LAN: the two LAN work w/ vanilla kext. Have not tried apple talk, etc.
* SATA port (ICH10) works out of the box. Have one HD connected to one of the controllers and a BluRay/DVD/CD connected to the other.
* Raid on ICH10 working with ChameleonEFI
* IDE Works
* Shutdown, Sleep and Reboot don't work. Used this [http://forum.insanelymac.com/index.php?showtopic=73234&amp;st=0&amp;p=641140&amp;] to fix power off only.
* for more help you can sop by at:
* [http://forum.insanelymac.com/index.php?showtopic=115121 GA-EP45-DQ6 Thread]
|PC_EFI version 8 + Vanilla kernel
|No
|-
|GA-EP45-UD3P
|Intel P45 ICH10
|
Stub will update with more info, but working 100%
* Install Method: Kalyway 10.5.2 -> 10.5.5 Retail
* Audio: ALC889A
|ChameleonEFI + Vanilla kernel
|No. Audio needs patching.
|-
|GA-X38-DS5
|Intel X38
|
* Install Method: Retail DVD + Apple 10.5.2 Combo update (dsmos.kext only needed to boot it)
* BIOS Version: F6
* Audio: ALC889A works (In/Out/Mic/SPDIF) with patch AppleHDA.kext (will break shutdown), using AppleHDA.kext w/ fix shutdown breaks Mic input
* LAN: Works w/ vanilla kext
* Purple SATA port (gigabyte SATA) Works w/ vanilla AppleAHCI.kext
* Orange SATA port (ICH9) will need a patch IOATAFamily.kext
* IDE Works
* WORKS: Shutdown, Sleep and Reboot (Not working on Vanilla kernel)
|EFI V8 GUID/MBR + Vanilla kernel
|No
|-
|X38-DQ6
|Intel X38
|
* Install Method: Kalyway 10.5.1 & Kalyway Combo Update
* BIOS Version: 3.70; Revision: 1.0
* Audio: ALC889A works with patch
* LAN: Works OOB
* SATA & IDE: SATA & IDE work OOB
* Optical Drive: Samsung on SATA works
|Unknown
|No, audio needs patching
|-
|EX38-DS4 (rev 1.1)
|Intel x38
|
*Install "leoallv2 version" 10.5.2
*all ok (ethernet realtek works fine, audio works fine with alc 889)
|
|
|-
|EX38-DS4
|Intel x38 with ICH9R 
|
*Install Method: Kalyway 10.5.1 & Kalyway Combo 10.5.2 Update using PCWIZ's [http://forum.insanelymac.com/index.php?showtopic=90795 Tutorial] and Additional Installers
*Audio: ALC889A Works 100% with PCWIZ's patch (applied twice, first time didn't take.) 
*Ethernet: Works 100%
*SATA: All 6 ports work @ 3.0 Gigabit
*USB: 2 ports reported as High-Speed 2.0; 6 ports reported as USB 1.0 (Have not pursued a fix at this time)
*Optical Drive: SATA LITE-ON DVDRW LH-20A1L Works 100%
*IDE: Not tested.
*Shutdown, Sleep and Reboot: Works
*Video Card: EVGA 8800GT 512 MB patched with Scott Dangel's [http://scottdangel.com/blog/?p=23 NVinstaller v.41] Installed AFTER Kalyway Combo 10.5.2 Update. Works 100% (Core Image, Quartz Extreme and Rotation All supported)
*Ram: 8 Gigs of 4 x 2GB G.Skill DDR-1000 PC2-8000 F2-8000CL5D-4GBPQ All Recognized and Works 100% Yeah Baby!!!
*Processor: Intel Quad Core Q6700 @ 2.67GHz
|Yes. Fully supported EFI v8 + Vanilla kernel
|No. PCWIZ's Addtional installer needed and Scott Dangel's NVinstaller v.41 needed.
|-
|GA-EP35-DS3R v2.1
|Intel P35
|
* Install Method: Kalyway + [http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1052comboupdate.html Apple Update 10.5.2] + Adobe Graphic Update
* BIOS Version: F2
* Audio: Works with AppleHD patch (2.1 and digital)
* LAN: Works out of the box
* SATA works in AHCI mode (NCQ working)
|Yes. Fully supported EFI v8 + Vanilla kernel
|No. Audio need patch.
|-
|GA-EP35-DS3 v2.1
|Intel P35 (ICH9)
|
* Install Method: IATKOS 1.0r2 + [http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1052comboupdate.html Apple Update 10.5.2] but direct update from 10.5.1->10.5.3
* BIOS Version: F2
* Audio: Works with AppleHD patch 
* LAN: Works out of the box
* SATA works, but detect only 2 drives, need patches to see all SATA drives.
|Yes. Fully supported EFI v8 + Vanilla kernel
|No. Audio need patch. 
|-
|GA-EP35-DS3R
|Intel P35 & ICH8
|
* Install Method: iATKOS v1.0i, Brazilmac had problems with Rosetta apps
* BIOS Version: F12; Revision: 3.3
* Audio: Audio888 installer package from Skippyretard and AppleHDA patcher v1.20
* LAN: No, edit 8053 to 8056 and 62 to 64 in the Apple Yukon2 kext
* SATA & IDE: Only 2 SATA ports work
|Unknown
|No, Audio & LAN need patches
|-
|GA-EP35-DS4 Rev. 2.1
|Intel P35
|
* Install Method: Leo4All v2
* BIOS Version: F12<? conformation please
* Audio: OOB - Used 889 (says DS3R)
* LAN: OOB - Realtek
* SATA & IDE: OOB, ICH9 - AHCI, J - IDE (else no DVD boot)
* Firewire: OOB
* Bluetooth: USB dongle working
* Sleep: OOB
|Yes (Vanilla 9.2.2)
|Yes. I used MBR, and does dual-boot XP. 
|-
|GA-EP35-DS4 Rev. 2.1
|Intel P35
|
* Install Method: Retail DVD and Patched kext's
* BIOS Version: F2 or F3
* Audio: Works with patched AppleHDA.kext
* LAN: Works out of the box
* SATA & IDE: SATA works OOB, IDE with Patch
*[http://forum.insanelymac.com/index.php?showtopic=95910 Install Guide by Coadey]
*[http://forum.insanelymac.com/index.php?showtopic=76404 Install Guide by Karaakeha1]
*[http://forum.insanelymac.com/index.php?showtopic=86167 Install Guide by LTL]
|Yes (9.2.2)
|No. Audio patch needed.
|-
|GA-EP35-DS4
|Intel P35
|
* Install Method: Kalyway 10.5.2
* BIOS Version: F2
* Audio: OOB
* LAN: OOB
* SATA & IDE: normal SATA works OOB, but not with software RAID0/1 (may have been my disks however). IDE untested.
* Note: Thanks to all those with GA-P35 and EP35 boards who posted here! Bought board for compatibility - was not disappointed.
|Yes (9.2.2)
|Yes.
|-
|EP35-DS4
|Intel P35
|
* Install Method: Retail DVD (See Below) & Netkas to 10.5.2
* BIOS Version: F1; Revision: 1.0
* Audio: ALC885 works with AppleHDA Patcher
* LAN: Works OOB
* SATA & IDE: Both work OOB
* [http://forum.insanelymac.com/index.php?showtopic=77165 Install Guide by ls8]
|EFI v8 Works
|No. Audio patch needed.
|-
|GA-G33M-S2
|Intel G33
|
* Install Method: Kalyway 10.5.2 on IDE disk, works out of the box
* Video: Onboard Video Chipset Intel GMA 3100 works out of the box at 1024*768 
* LAN: Onboard Realtek RTL8111B Works out of the box, DHCP works OK
* USB: works OK
* Audio: Onboard Realtek ALC889A not tested
|
|No. Video patch needed 
|-
|GA-M57SLI-S4
|nVIDIA® nForce 570-SLI
|
Metodo de instalacin LEO4ALLv3 opciones seleccionadas: 
*Netkas 9.2.0 Sleep
*ACPIPlataform sin seleccionar ninguna
*SMBIOS - DDR800
*Audio - ALC 888
*NVInject - 256 MB v 0.2.1 (Trabaja lo basico con el [http://www.megaupload.com/es/?d=SWC1S2D9 NVidia Universal Installer.mpkg.zip] funciona perfecto la tarjeta de video)
*ForceDeth no funciona la tarjeta de red solo la detecta y detecta un modem (no se de donde jj)
*Nforce Test. 
Tiene 4 GB de RAM pero al instalar se congela a 3 minutos de acabar hay que remover 2 Gb e intalar si se agrega despues no causa problemas (hasta ahorita).
* DVD SATA
* Disco IDE 500Gb
* LAN Marvell 88E1116 phy (10/100/1000 Mbit)
* CPU AthlonTM 64 X2 4800 Dual-Core
* Audio: Onboard Realtek ALC888 CODEC chip
* Onboard T.I. TSB43AB23 chip
* Video Nvidia Geforce 8600GT

|unknow
| No, Video y LAN necesita parche
|-
|GA-M61PM-S2 Rev. 2.0
|NVidia nForce430
|
* Install Method: Zephyroth AMD Rev.1.4033109
* BIOS Version: F3 or F9c
* Audio: Works with patched AppleHDA.kext
* LAN: Not working
* Video: Not tested. Using GeForce 8600GT (PCI-e)
* SATA & IDE: SATA works OOB.
|Unkown
|Needs DVD to boot.
|-
|GA-M61SME-S2
|NVidia nForce 6100/415
|
* Install Method: kaly AMD 
* BIOS Version: F9
* Audio: Works with patched AppleHDA.kext
* LAN: Not working
* Video: No QE/CI Using GeForce 8600GT (PCI-e)
* SATA & IDE: SATA works OOB.
|
|
|-
|GA-M61P-S3 Rev. 1.0
|NVidia nForce430
|
* Install Method: Leo4Allv3
* Audio: Works using ALC883.kext
* LAN: Not working
* Video: Integrated GeForce 6100 (No QE/CI)
* SATA & IDE: SATA works OOB.
|Vanilla 9.2.0 kernel works great
|Still working on LAN Drivers. nForce drivers don't work
|-
|GA-P35-DS3
|Intel P35
|
* Install Method: Kalyway 10.5.1 + Patched Kalyway Update 10.5.2 + Patched Kalyway Kernel 10.5.2 + Graphic Update
* BIOS Version: F12
* Audio: Works with AppleHD patch (2.1 and digital and input)
* LAN: Works out of the box
* SATA Support works without AHCI
* IDE Suppport works
|Yes. Fully supported EFI v8 + without Vanilla kernel
|No. Audio needs patch. Bonjour and UPNP services like Connect 360 do not work OOB. Shutdown does not work with vanilla kernel.
|-
|GA-P35-DS3
|Intel P35
|
* Install Method: Kalyway 10.5.1 & Kalyway Combo Updater
* BIOS Version: F12; Revision: 2.1
* Audio: Works with HDA ICH9 ALHC888 works & Apple HDA Patcher v1.20 (EDIT: actually is a ALC889a that patch works great)
* LAN: Works OOB
* SATA & IDE: SATA works with IOATAFamily.kext V1.1
* Optical Drive: LG GSA-H55L IDE (Fully Working with IDE to SATA Cable )
* Shutdown & Sleep don't work, restart unknown
|EFI v8 & Vanilla Kernel
|No, Audio needs patching
|-
|GA-P35-DS3L
|Intel P35
|
* Install Method: Kalyway + Apple Update 10.5.2 + Graphic Update
* BIOS Version: F8f
* Audio: Works with patched AppleHDA
* LAN: Works out of the box, Bonjour might need R1000 kext.
* SATA & IDE: SATA woks OOB, AHCI works with all ports with [http://forum.insanelymac.com/index.php?showtopic=95309&st=0&start=0 This]
* Shutdown and Restart work, Sleep doesn't work
|Yes. Fully supported EFI + Vanilla kernel
|No.  Audio doesn't work
|-
 
|GA-P35-DS3P
|Intel P35 + ICH9R
|
* Install Method: Kalyway 10.5.1, Kalyway 10.5.2 Combo Updater & Kalyway Kernel update
* BIOS Version: F8; Revision: 2.0
* Audio: works  with ALCinject.kext and AppleHDA.kext
* LAN: LAN working out of the box
* SATA & IDE: SATA works out of the box, using AHCI
|Yes. Fully supported EFI + Vanilla kernel
|No; Audio need patching
|-
|GA-P35-DS3P (REV 2.1)
|Intel P35 + ICH9R
|
* Install Method: Leo4All V2
* BIOS Version:; Revision: 2
* Audio: Model, ALC889A - Used Taruga AppleHDA patcher; removed ALCInject.kext its not needed with EFI string
* LAN: Model, Realtek 8111B 
* SATA works, in BIOS set all disk modes to ACHI (see patching note)  IDE: not tested (yet)
* Samsung SH-203B - Sata interface
* Yes, all.
* Firewire, and USB ports all working
|Yes; EFI & 9.2.2 vanilla
|No, Audio needs patching (see above)
|-
|GA-P35C-DS3R
|Intel P35 + ICH9R
|
* Install Method: iDeneb 10.5.5
* Hardware: Intel Core 2 Duo 2.66GHz CPU, Patriot 4GB DDR2 667MHz memory (dual channel), EVGA NVIDIA GeForce 8400GS PCIe graphics card, 600watt Cooler Master PSU, Samsung 1TB SATA HDD, Sony IDE DVD+-RW/DL Burner.
* Everything works out of the box, except for the following:
** IDE (Gigabyte SATA2 controller chip, which is a re-branded JMicron ATA/SATA controller).  I just changed IOPCIPrimaryMatch in JMicronATA.kext and it worked.
** NVIDIA Dual-monitor setup.  I just tweaked the NVCAP value in NVinject.kext and it worked.  See NVinject forums for info.
** Sleep and shutdown.  To get both of these working, I changed Suspend type to S1 in the BIOS, and installed "poweroff_fix" (search the InsanelyMac forum) which disables 1 of the CPU cores at shutdown time.
* Working out of the box: Full audio (ALC889), LAN, SATA (set BIOS to AHCI mode), USB, PCIe, Bluetooth, IDE DVD Burner, Video with NVinject (QE/CI), EFI, Vanilla kernel, etc.
|Yes
|Almost (See fixes I've listed here).
|-
|GA-P35C-DS3R
|Intel P35 + ICH9
|
* Install Method: Kalyway + Apple Update 10.5.2 + Graphics Update
* BIOS Version: F4
* Audio: Works with patched AppleHDA + ALCinject (mic works)
* LAN: Works out of the box, but sourceforge Realtek R1000 driver is better (fixes Bonjour)
* SATA: SATA works out of the box, using AHCI on ICH9 controller (JMicron disabled)
|Yes. Fully supported EFI + Vanilla kernel
|No.  Audio needs patch
|-
|GA-P35-DS3R
|Intel P35 + ICH9R
|
* Install Method: Kalyway 10.5.1 + Kalyway Upd. 10.5.2 + Vanilla kernel 9.2.0 + Graphics Upd.
* BIOS: Sata native mode, 64 bits enabled, Vanderpool enabled, Sleep S0 (S3 doesn't work)
* Audio: works with patched AppleHDA + ALCinject
* LAN: works out of the box
* SATA: works out of the box, using ICH9R without AHCI (JMicron disabled)
|Yes. Fully supported EFi + Vanilla kernel (kernel 9.2.2 ok)
|No.  Audio needs patch
|-
|GA-P35-DS4 (rev.2)
|Intel P35
|
* Install Method: Kalyway 10.5.1 & Kalyway Combo Updater & Leopard GA-P35-DS4 install pack (http://forum.insanelymac.com/index.php?showtopic=77165)
* BIOS Version: F11; Revision: 2
* Audio: Works with HDA ICH9 ALHC889A 
* LAN: Works OOB
* SATA & IDE: SATA(ahci) works and IDE to
* Optical Drive: SAMSUNG SH-S182M IDE 
* FW and USB working OOB
* Shutdown & Sleep  work, restart unknown
|EFI v8 & Vanilla Kernel
|No, Audio needs patching
|-
|GA-P35C-DSL
|Intel P35
|
* Install Method: Kalyway 10.5.1 & Kalyway Combo Update
* BIOS Version: F6; Revision: 2.0
* Audio: ALHC888 and Apple HDA Patcher v1.20
* LAN: Doesn't always work
* SATA & IDE: Both fully working
* Optical Drive: LG GSA-H22N BK (Fully Working)
* Shutdown & Reboot fully working, Sleep not tested
|EFI v8 + Vanilla Kernel
|No.  Audio needs patch
|-
|GA-P31-DS3L
|Intel P31 + ICH7
|
* Install Method: Kalyway 10.5.2, iDeneb 10.5.5, Jas 10.5.2 and Leo4all 10.5.2
* BIOS Version:; Revision:
* Audio: ALC888 with AC97 kext (on DVDs) or ALC888audio (6 channel and inputs)
* LAN: 8111 (kext on DVDs)
* SATA & IDE: SATA and IDE works
* Updates working with IntelCPUPMDisabler.kext
* Shutdown, sleep and restart works with shutdownfix
* 
|Vanilla works with core duo and core2duo processors. EFIv8 works.
|Yes
|-
|GA-P31-DSL
|Intel P31 + ICH7
|
* Install Method: BrazilMac Patched DVD & MBR Partition
* BIOS Version: F8; Revision: Unknown
* Audio: Realtek ALC888 works with AppleHDA Patcher
* LAN: RTL 8111B works OOB
* SATA & IDE: Works OOB
|EFI v8 Works
|Audio needs patching
|- 
|GA-G33M-DS2R
|Intel G33
|
* Install Method: Kalyway 10.5.1 + manual Update to 10.5.2 + Graphic Update
* BIOS Version: F6
* Audio: Works with AppleHDA patch (stereo out, front panel, digital, mic, line in)
* LAN: Works out of the box
* SATA 6 ports works AHCI
* IDE  works
* [http://forum.insanelymac.com/index.php?showtopic=71338 Thysm00 Guide]
|Yes. Fully supported EFI v8 + Vanilla kernel
|No. Audio needs patch.
|-
|GA-G31M-ES2L
|Intel G31
|
* Install Method: Retail disk, using HFS+ EFI bootloader
* BIOS Version: F3
* Audio: Realtek ALC662, untested
* LAN: Works out of the box
* SATA & IDE: Works out of the box
*
| Yes.  Fully supported EFI + Vanilla kernel
| Audio may need patch.
|-
|GA-G31M-S2L
|Intel G31
|
* Install Method: iDeneb 10.5.5 - selected: Vanilla Kernel 9.5 on Intel Core2Duo 7200
* BIOS Version: F8a
* Audio: Realtek ALC662 works 100% using Alc662 chipset patch on installer DVD
* LAN: Works out of the box
* SATA & IDE: Work OOB using ICHx chipset patch on installer DVD
* 
|Yes. Fully supported EFI Chameleon + Vanilla kernel
|No. Audio needs patch.
|-
|GA-G31M-S2L
|Intel G31
|
* Install Method: LEO4ALLv3 -selected:Vanilla Kernel 9.2.2, EFI, & ICHx Chipset drivers
* SM Bios 2.3, ACPI 1.0b, PnP 1.0a, DMI 2.0
* Audio: Realtek ALC662 works with AppleHDA patcher & alc662.txt or Use Azallia Audio on installer DVD
* LAN: Works out of the box, reccomended to set ip address manualy. *Bonjour doesn't work properly! Switched to Netgear GA311 for full compatibility.
* SATA & IDE: Work OOB using ICHx chipset patch on installer DVD
* [http://forum.insanelymac.com/index.php?showtopic=71338 Thysm00 Guide]
|Yes. Fully supported EFI v8 + Vanilla kernel
|No. Audio needs patch.
|-
|GA-G31M-S2L
|Intel G31
|
* Install Method: Kalyway 10.5.2, Vanilla Kernel
* Configuration: M/B, Core2Quard (detected as 2.4 GHz Unknown), Radeon X1600XT (id 0x71c0), 2x1GB DDR2
* After installation: 1) download [http://forum.insanelymac.com/index.php?act=attach&type=post&id=6740 Azalia HD Audio Fix] 2) [http://forum.insanelymac.com/index.php?showtopic=69345&pid=508765&mode=threaded&start= Fix VideoCard] 3) 4) [http://www.psystar.com/openhaltrestart.html Fix Reboot/Shutdown/Sleep? problem] 5) 10.5.3 ComboUpdate 6) Download 10.5.4 update from AutoUpdate
* LAN: Works out of the box, reccomended to set ip address manualy. *Bonjour doesn't work properly! But, sometimes after correct (not manual) restart/shutdown, LAN not working (error - cable unplugged).  
* SATA & IDE: Work OOB using ICHx chipset patch on installer DVD
* [http://forum.insanelymac.com/index.php?showtopic=71338 Thysm00 Guide]
* Correct reboot & shutdown working after path, sleep maybe not working. Internal video not fully working.
|Yes. Fully supported EFI v8 + Vanilla kernel
|No. Audio needs patch.
|-
|GA-G31M-S2L
|Intel G31
|
* Install Method: iDeneb 10.5.5
* Selected packages (during installation): ALC662, ICHx chipset patch
* Audio: required patching (see right)
* LAN: Works out of the box.
* SATA & IDE: Had problems booting with SATA disk drive. PATA worked with no problems.
|Yes. Fully supported EFI v8 + Vanilla kernel
|No. Installed AzaliaAudio.zip from [http://forum.insanelymac.com/index.php?showtopic=36520&hl=azalia]
|-
|GA-G31MX-S2
|Intel G31
|
* Install Method: Jas 10.5.4 
* Audio: Realtek ALC888 works out of box
* LAN: Realtek RTL8110SC works out of the box
* SATA & IDE: SATA works out of box, IDE DVD-ROM drive works
* Video: Intel GMA 3100 has no core image or quartz extreme, will add Nvidia 7300LE 256MB card later
|Yes. 
|Yes
|-
|GA-K8NF-9
|NVIDIA nForce4 (4X) MCPs
|
* Install Method: Zephyroth Leopard 10.5.2 AMD
* BIOS version: Unknown
* Audio: Realtek ALC850 Audio AC'97 Codec : Works with [http://forum.insanelymac.com/index.php?s=&showtopic=88079&view=findpost&p=630083 Kext] but, may works out of the box.
* LAN: Works out of the box
* SATA: Works out of the box
* IDE: Not tested
|Yes
|Yes
|-
|GA-K8N-SLI
|NVIDIA nForce4 
|
* Install Method: Leo4All v2
* BIOS version: F9
* Audio: Realtek ALC850 -marked 850 driver in Leo install.
* LAN: Works OOB
* SATA: Works OOB
* IDE: Works OOB
* Restart & Shutdown work, no Sleep
|Yes
|Yes
|-
|GA-K8N51GMF-9
|NVIDIA nForce 430
|
* Install Method: Zephyroth Leopard 10.5.2 for AMD
* BIOS Version: F7; Revision: Unknown
* Audio: Yes (Stereo) works with "beta4some860_880"
* LAN: Works with forcedeth-nockd.kext
* SATA & IDE: Does SATA work? Any options in BIOS or Patches? Same thing with IDE
* Restart & Shutdown,Sleep fully working 
|Unknown
|LAN and Audio needs patch
|-
|GA-P965-DQ6
|Intel P965 + ICH8R
|
* Install Method: Kalway 10.5.1, Kalyway 10.5.2 Combo Updater & Kalyway Kernel update
* BIOS Version: F11; Revision: 1.0
* Audio: Realtek ALC888DD; Not Tested
* LAN: Marvell 8053, works OOB
* SATA & IDE: Both work OOB
* Computer wakes from sleep, keyboard doesn't work after that
|Unknown
|Yes, audio not tested
|-
|GA-P965-DS3
|Intel P965
|
* Install Method: Kalway 10.5.1 & 10.5.2 Combo Updater 
* BIOS Version: F10; Revision: Unknown
* Audio: Works
* LAN: Works
* SATA & IDE: Works
|Unknown
|Yes
|-
|GA-965P-S3
|Intel P965 + ICH8
|
* Install Method: Kalway 10.5.1, Kalyway 10.5.2 Combo Updater & Kalyway Kernel update (vanilla) or iATKOS and patch (see below)
* Kalyway: (kernel panics with memory > 3GB)
* Options: EFI_guid, Natit, ALC883, Vanilla kernel +fix
* BIOS Version: F12; Revision: 1.0
* Audio: ALC883; Headphones work (only front panel jack), Line out not working, Digital out not tested
* LAN: Marvell 8056 Gigabit; Works OOB
* SATA & IDE: (both set to AHCI) Only Orange connectors (not purple); Works OOB
* iATKOS: (kernel panics with memory > 3GB)
* Audio: Works OOB
* LAN: Need to repatch after update, save AppleYukon2.kext before upgrade and replace this file after upgrade, reboot twice
* Install iATKOS 1.0i and then upgrade to 10.5.2 with guide [http://forum.insanelymac.com/index.php?showtopic=87078 here]
|Yes
|Yes, Audio: only headphone, lineout and digital showing in preferences: not fully tested
|-
|GA-965P-S3 rev1.1
|Intel P965 + ICH8
|
* Installed with PC_EFIv8 using Retail 10.5 Install DVD + 10.5.2 Combo Update (installed from separate Kalyway partition used for system maintenance)
* BIOS Version: F13e; Revision: 1.1
* Audio: ALC883 using SkippyRetard ALC8xx installer enables the use of all Analog Ports (5.1/7.1) as well as Line-In and Mic Jack.
* LAN: Marvell 8056 Gigabit - Needs plist configuration (change 8053 to 8056 IDs) of IONetworkingFamily.kext (vanilla)
* SATA & IDE: JMicron IDE not useable under AHCI, JMicron SATA AHCI useable with plist configuration of AppleAHCIPort.kext (generic), ICH8 last 2 ports (of 4 total) not working with 10.5.2 IOAHCIFamily.kext - 10.5.3 kexts fixes this.
* No 3072MB/4096MB (3GB/4GB) memory limit as compared to other Custom Installations (Kalyway/iATKOS/Loe4ALL) due to the absence of JMicronATA.kext and AppleVIAATA.kext - Tested on 6144MB (6GB) and 8192MB (8GB) equipped systems.
|Yes
|Yes; Audio needs patching for 5.1/7.1 output, LAN needs plist configuration, AHCI needs plist configuration, EFI Strings for GFX and Audio (if not using NVInject/NVKush/NATIT and ALCInject)
|-
|GA-945GCM-S2C
|Intel 945G + ICH7 Chipset
|
* Install method: Kalyway 10.5.1 Install DVD
* Update to v10.5.2: [http://netkas.org/?p=50 Netkas method]
* kernel 9.2.2 ok
* BIOS version F4, Rev. 1.0
* Audio requires AppleAzaliaAudio.kext
* LAN working out of the box
* SATA and IDE working out of the box
* Certain applications (i.e. FireFox) cause Intel GMA950 glitches
|EFI + Vanilla kernel 9.2.2 working
|No; Audio needs patching
|-
|GA-945GCM-S2L
|Intel 945G + ICH7 Chipset
|
* Install method: Kalyway 10.5.1 Install DVD
* Update to v10.5.2: Kalyway 10.5.2 Combo update + Apple update + Kalyway 10.5.2 Kernel update
* Audio requires Azalia_Out.kext on Kalyway
* LAN not working out of the box need to use RTGMac_v1.1.6.zip
* SATA and IDE working out of the box
|EFI + Vanilla kernel working
|No; Audio/LAN needs patching
|-
|GA-945GCM-S2L
|Intel 945G + ICH7 Chipset
|
* Install Method: Kalyway 10.5.2 Install DVD then Kalyway 10.5.3 Upgrade then Apple update to 10.5.4
* Audio: Working with Azalia_Out.kext or this driver [[http://www.insanelymac.com/lofiversion/index.php/t109782.html]]
* LAN: Works OOB with default settings on Kalyway 10.5.2 Disk, however after computer wakes from sleep it has no LAN connectivity
* SATA & IDE: Both Working (on all 10.5.2 , 5.3 and 5.4)
* Optical Drive: LG super-multi - works fine
* Shutdown and sleep work but LAN connectivity is lost after waking from sleep
|EFI + Vanilla kernel working
|Everything seems to work OOB. Audio can be improved by using this guys driver[[http://www.insanelymac.com/lofiversion/index.php/t109782.html]] 
|- 
|GA-945GCMX-S2
|Intel 945GC + ICH7
|
* BIOS version: F4, Rev. 6.6
* (1) Installation (v10.5.0) method: [http://forum.insanelymac.com/index.php?showtopic=72493 Onetrack method] with [http://netkas.org/?p=41 EFI v8.0] on GPT using [http://forum.osx86scene.com/viewtopic.php?f=16&t=2520 iGuru guide]
* Update to v10.5.2: [http://netkas.org/?p=50 Netkas method]
* Audio (ALC 888): Works with [http://forum.insanelymac.com/index.php?showtopic=36520 skippyretard patch]
* Video (GMA 950): Works with modified AppleIntelIntegratedFramebuffer.kext from [http://forum.osx86scene.com/viewtopic.php?f=16&t=2008 BrazilMAC guide]
* LAN: Works out of the box
* IDE and SATA: Works out of the box
* Sleep/Wake, Restart, Shutdown work
* ----
* (2) Installation method: iATKOS
* Audio: Works OOB
* LAN: Works OOB
* SATA & IDE: Works OOB
|Yes
|No.  Audio and video need patches
|- 
|GA-945GCMX-S2
|Intel 945GC + ICH7
|
* BIOS version: F6c
Am using onboard GMA950 video and Celeron D 630.
With Leo4all v3, everything works fine - Patched 9.2.2 Kernel, ALC888, Realtek LAN, GMA950 older version (Resolution Change version), ICHx support
|EFI bootloader untested, due to usage of Celeron D CPU. Minor graphics glitches, mainly related to mouse cursor.
|Yes
|-
|GA-945GZM-S2
|Intel 945 Chipset
|
* Install method: Kalyway 10.5.1 + Kalyway 10.5.2 ComboUpdate
* BIOS version unknown, Rev. unknown (1/29/07)
* Audio needs [http://forum.insanelymac.com/index.php?act=attach&type=post&id=6726 skippyretard's driver]
* LAN works out of the box
* SATA and IDE working
|Unknown
|No; Audio needs patching
|-
|GA-945P-S3
|Intel 945P + ICH7
|
* Install Method: iATKOS V1.0i & Kalyway 10.5.2 Updater
* BIOS Version: Unknown; Revision: 3.3
* Audio: Realtek ALC888 8 Channel Audio works
* LAN: Realtek 8111B Gigabit Ethernet works
* SATA & IDE: Both work
|Unknown
|Yes
|-
|GA-8I865GVMK F9 (Socket 478)
|Intel® 865G GMCH & ICH5
|
* Install Method: Kalyway
* Audio: Realtek ALC655 works
* LAN: Intel PRO/100 VE Ethernet Controller works
* SATA & IDE: Unknown
* Optical Drive: Unknown
|Unknown
|Unknown
|-
|GA-G31M-S2L
|IntelG31 + ICH7
|
* Install Method: Kalyway 10.5.2 + Kalyway ComboUpdate10.5.3 + OnlineUpdate10.5.4 (all Vanilla)
* BIOS Version: unknown
* Audio: ALC662, works with Taruga's HDA-patcher 1.20 & ALC662.txt from his page
* LAN: not tested (seems to be working OOTB though)
* SATA & IDE: no issues
* Optical Drive: SATA & PATA work
* Shutdown, reboot, sleep work fine
* Onboard-GFX: not tested
* HIGHLY RECOMMENDED!
|YES (EFI_v8 & Vanilla, MBR)
|Sound needs patching
|-
|GA-EG31M-S2 (rev. 1.0)
|IntelG31 + ICH7
|
* Install Method: Boot-132 from Darwin/x86 CD, swap Retail Leopard 10.5.0 disc into drive and install, Software Update to 10.5.5.
* BIOS Version: F2i (beta)
* Audio: ALC888, have not patched yet
* LAN: Realtek 8111C Gbit, tested, works OOTB
* SATA & IDE: using only SATA drives
* Optical Drive: SATA works
* Shutdown works fine; restart requires pressing reset button afterwards (may be issue with installed bluetooth adapter); sleep works fine
* Onboard-GFX: not tested
|Yes
|Sound needs patching
|-=
|GA-MA69G-S3H (Socket AM2)
|AMD 69G & SB600
|
* Install Method: Kalyway 10.5.2, AMD patch
* Bios F6
* Audio: Realtek ALC889A (works after applying Tauraga patch)
* LAN: Realtek RTL8110 GE Ethernet Controller works
* SATA: works
* IDE: works
* Optical Drive: works with SATA and IDE
* Onboard video does not work
|No
|Only needed to patch Audio with hdapatcher and the txt file from tauraga
|-
|-
|GA-M61SME-S2 (Socket AM2)
|nForce 405 / nVidia Geforce 6100
|
* Install Method: Kalyway 10.5.2, AMD patch
* BIOS Version:; Revision:
* Audio: nForce AC97, worked out of box
* LAN: nForce onboard 10/100, Failed
* VIDEO: not tested, Geforce 8500GT used instead.
* SATA: Installer fails to load, but once OSX is installed runs fine.
* Optical Drive: works with SATA
* Yes
* No
|Yes
|No, Lan needs patching.
|-
|Ga-p35-s3g(rev1.0)
|P35
|
*Leo4all 10.5.2
*Lan (works out of box)
*5.1 alc662 card works(Only 2.1+Mic works +patch required)
*Gefore 6600gt used 1440*900 at 60Hz.(My monitor supportes upto that only)
*samsung dvd sata works(burn test not done)
*Only Audio need patching all other things work out of Box.
-------
For More info about audio visit
http://forum.insanelymac.com/index.php?showtopic=96725&st=0&p=690751&#entry690751
For another hackintosh user experience 
http://forum.insanelymac.com/index.php?showtopic=121031&st=0&p=856502&#entry856502
|Yes(Vanilla Kernel)
|Only Audio need patching.
|-

|}  .

=== Intel ===

{| class="wikitable" width="100%"
!Hardware Name 
!Chipset
!Notes
!EFI/Vanilla kernel working
!Fully Working w/o Patch
|-
|Intel DG43NB
|Intel G43 Express Chipset ICH10
|
*Install Method: Kalyway 10.5.2
*Audio (ALC888VC), with Azalia driver found [http://forum.insanelymac.com/index.php?showtopic=123697&pid=916765&mode=threaded&start=#entry916765 here] (remove AppleHDA and HDAenabler kext before installing)
*Video (onboard, didn't worked), i use nVidia Quadro FX1400
*LAN (Intel 82567LV) works with kext for 82566mm found [http://forum.insanelymac.com/index.php?showtopic=128931 here] 
*USB (12x) working
*Firewire (2x) working
*IDE working, SATA (6x) working
*4GB DDR2/800 working
*Shutdown, Sleep and Reboot works
*Tested by [http://www.facebook.com/profile.php?id=1343186070&ref=profile Muhammad Anil Babur Kiani]
'''Note: Installed from Sata DVD'''
|Sleep and Kabyl kernel is working 
|
|-
|Intel DP43TF
|Intel P43 Express Chipset ICH10
|
*Install Method: iDeneb 10.5.4
*Audio (ALC888VC), with Azalia driver found [http://forum.insanelymac.com/index.php?showtopic=123697&pid=916765&mode=threaded&start=#entry916765 here] (remove AppleHDA and HDAenabler kext before installing)
*Video (no onboard), i use ATI HD3870
*LAN (Intel 82567LV) works with kext for 82566mm found [http://forum.insanelymac.com/index.php?showtopic=128931 here] 
*USB (12x) working
*Firewire (2x) working
*IDE working, SATA (6x) working
*8GB DDR2/800 working
*Shutdown, Sleep and Reboot works

'''Note: Installed from Sata DVD'''
|EFI & Vanilla is working 
|
|-
|Intel D201GLY2(A)
|Silicon Integrated Systems® SiS964 Chipset
|
*Install Method: Leo4All
*Audio (ADI, AD1881), not working
*Video (SIS Mirage 1), working in VESA mode (no acceleration)
*LAN (SIS900) not working
*USB working
*IDE working, SATA controller not working

'''Notes: Soldered CPU, 1x PCI slot, 1x DDR2 RAM slot.'''
So it's impossible to have LAN and Audio working.
Unfortunately, no cheap Hackintosh with this one.
|EFI is working Vanilla not tested
|
|-
|Intel D5400XS(Skulltrail)
|Intel® 5400 Express Chipset
|
*Install Method: Kalyway 10.5.2 DVD, then install 10.5.5 update, after that install the driver(s)
*Audio Sigmatel STAC9274D Working with Apple HDA Patcher 1.16 and STAC9274D codec dump available at insanelymac forums
*LAN Intel Gigabit Ethernet working out of box
*USB working out of box for all ports and all devices
*FireWire works out of box
*IDE working, SATA controller working in AHCI mode, Native, detected as ESB2 or Unknown AHCI controller
*According to the IO Registry, some devices are not working, but everything works fine
*Optical drives, harddrives, ram and all pci slots work
*Installs from SATA DVD Drive
*2xFW/10xUSB/6xSATA/2xeSATA/1xIDE/Surround Audio/ Socket 771! with 775 cooling mounts / eATX factor
|PC_EFI works, Vanilla does not work (panic), Shutdown/Reboot sometimes hangs (cpu's halted, video off, but power still on)
|Audio controller requires patching
|-
|DP35DP
|Intel P35 + ICH9
|
* Install method: Kaliway's 10.5.1 DVD + 10.5.2 Combo Update following [http://forum.insanelymac.com/index.php?showtopic=87078 this] tutorial
* BIOS Version: DPP3510J.86A.0413
* Audio: Works with Kext Helper & STAC9271D_0x83847627_testing codec downloadable [http://forum.insanelymac.com/index.php?showtopic=32859 here]
* Onboard LAN does not work (buy a cheap realtek)
* USB, Firewire work out of the box
* IDE/ATA does not work
* SATA works in IDE Mode
* Optical Drive must be SATA or ATA to perform install
* To make restart fully work, install 10.5.3 combo update from Kalyway
|EFI v8 + Vanilla Kernel Working, Restart and Sleep work
|Audio requires patching
|-
|DG33FB
|Intel G33
|
* Follow this guide
* [http://www.insanelymac.com/forum/index.php?showtopic=131281]
|EFI v8 + Vanilla Kernel Working
|Audio and IDE require patching, Lan required patching too
|-
|DG33FB
|Intel G33
|
* Install method: Kalyway 10.5.2 DVD_Intel_AMD and Vanilla Kernel 9.2. Upgradable to 10.5.5. 
* iDeneb does not work. Hangs up at Disk Utility (and if Disk formatted then at Installation)
* BIOS Version: DPP3510J.86A.0413
* Audio: Works with ALC888
* Onboard LAN does not work (Realtek 8139 PCI card native OOB)
* USB (6+2) & Firewire work out of the box
* Onboard USB & Firewire work for front panel
* IDE works, no Patching
* SATA works in AHCI & IDE Mode
* IDE & SATA Optical works, fully iTunes & DVD Player functional
* Onboard Intel GMA3100 graphics mixed result. Works for some at 1024x768 fixed resolution, not further tested. Most likely would not work though!
* EVGA Nvidia 7600GT KO - all resolutions, NVinject-256 via Kalyway disc
|EFI v8 + Vanilla Kernel Working
|Audio requires patching. Full sleep/shutdown/restart with Patching. 
|-
|DG33TL
|Intel G33
|
* Install method: Kaliway's 10.5.2 DVD 
* BIOS Version: 
* Audio: Works with Patching
* Onboard LAN does not work
* Onboard Video does not work
* USB, Firewire work out of the box
* IDE (not tested)
* SATA works in AHCI Mode
|EFI v8 + Vanilla Kernel Working
|Audio requires patching; For more information, see [[Intel DG33TL Motherboard]] on the wiki, or [http://forum.insanelymac.com/index.php?showtopic=66238 this forum post] on insanelymac.org.
|-
|D975XBX2 (BADAXE2)
|Intel 975X Express ( ICH7 Southbridge)
|
* Install Method: Leo4allv3 vanilla 9.2.2
* BIOS Version: 2813 
* Audio: Onboard Unknown,I'm using external  Rme Fireface 400 (Firewire)
* LAN: Intel® 82573E/82573L Gigabit Ethernet Controller, no patch, works!
* SATA & IDE: Both work!  no patch
* Optical Drive: Samsung RW. Works fine
* Do shutdown,Yes with  ACPIPI old 1.1.0
|Yes both working
|Need only contained dvd patch and driver. Install ichx, acpipi 1.1.0 otherwise no shutdown
|-
|D975XBX2KR (BadAxe2)
|Intel 975X Express
|
* Install Method: BrazilMac 10.5 + EFI v8 MBR, Vanilla kernel
* BIOS Version: 2813 [BX97520J.86A]; Revision: Unknown
* Audio: Need to patch with AppleHDAPatcher_v1.16 (STAC9274D)
* LAN: Need to replace IONetworkingFamily.kext from 10.4.9 + EFI strings to fix various UUID errors and TimeMachine
* SATA & IDE: Work OOB
|Yes, both work
|
|-
|D975XBX2
|Intel 975X & ICH7DH
|
* Install Method: iATKOS_v1.0i vanila + 10.5.2 direct update (Netkas)
* SATA AHCI (GUID Partitions), IDE, USB, FireWire and Lan fully working.
* GF7600GT as EFI (string added): no injectors
* Sigmatel STAC9274D audio working with Taruga's AppleHDAPatcher 1.16
* Onboard Marvel88SE61XX not working 
|Yes (pc_efi_v8 + pc_efi_v7.4)
|Sigmatel Audio requires patch

|-
|Intel D945GCLF
|Intel® 945GC and ICH7
|
*Install Method: Kalyway 10.5.2 (kernel 9.2.0 + usb patch because System.kext is by default 9.2.2 and should be 9.2.0)
*Integrated Intel® Atom 1.6ghz (HT) processor working (system think it's a Core Solo 1.6ghz)
*Realtek ALC662 audio working (Mic Not working yet) 
*Intel Graphics Media Accelerator 950 (QE/CI fully supported. It works like a charm!)
*LAN works, but after sleep losses DHCP connection, suggest to use manual IP as work around. 
*Six USB 2.0 ports working
*Two SATA ports and One PATA IDE working
*Sleep works

This is a perfect system! And really cheap (54€)

'''Note:''' Some distributions might not support video resolution over 1280x1024 out of the box.  After patching with a different version of IntegratedFrameBuffer kext, 1680x1050x32 works fine but no 3D support.
|Efi working, Vanilla working
|No patch needed! Everything works out of box
|-
|DQ965GF
|Intel Q965
|
* Install method: Kalyway 10.5.2 DVD_Intel_AMD Upgradable to 10.5.6 
* good working without disabler, can use custom DSDT: [http://www.mediafire.com/osxfile (Video, sound, ethernet)]
* BIOS Version: Last
* Audio: Works with [http://forum.insanelymac.com/index.php?&showtopic=134879 patched version STAC9227] (Mic, Line-in works fine)
* Audio(legacy kexts): [http://forum.insanelymac.com/index.php?showtopic=86809 DQ965GF topic]
* Onboard LAN work but not support powermanagement, read [http://www.insanelymac.com/forum/index.php?&showtopic=128931 this] thread
* USB & Firewire work out of the box
* SATA works in AHCI Mode
* Onboard Intel GMA3000 doesnt work, required external videocard
|Chameleon SMBIOS + Vanilla Kernel Working
|Audio requires patching, or use legacy Audio kexts
|-
|Intel D945GCLF2
|Intel® 945GC and ICH7
|
*Install Method: Kalyway 10.5.2
*At the installation window, Select customize. Under Intel_GMA, select GMA950 only. ( without this selection, you get 1024 x768 only).
*S-video out works at 800x600 only with default Leopard kexts.  Do not select GMA950 in the Kalyway installer or S-Video will be solid black or blue screen.
*Integrated Intel® Dual-Core Atom 1.6GHz (HT) Processor (System reports it as Core Duo @ 1.6GHz)
*Realtek ALC662 audio working (Mic not working yet)
*Intel Graphics Media Accelerator 950 (QE/CI fully supported)
*Gigabit LAN
*Six USB 2.0 ports working
*Two SATA ports and One PATA IDE working
*Sleep works

This is a perfect dual core system! Motherboard was $90 CAD.

|Efi working, Vanilla working
|No patch needed! Everything works out of box
|-


|-
|Intel D945GNT
|Intel® 945G Express Chipset
|
*Install Method: All
*Audio (Sigmatel 9220) works with patch 9200.pkg
*LAN works with ASUSP4800vm.pkg {for tiger add product ID to AppleIntel8255x.kext}{for leopard need IONetworking family.kext}
*SATA & IDE works
|Efi is working Vanilla not tested
|
*Sigmatel Audio require patch
*Intel® Pro/100ve requires driver
|-
|945GNTKLR
|Intel 945G
|
* Install Method: Kalyway 10.5.1 & Combo Updater
* BIOS Version: Unknown; Revision: Unknown
* Audio: HDA Intel 9221 & Apple HDA Patcher v1.20
* LAN: Works OOB
* SATA & IDE: SATA & IDE work
* Video: GMA950 works by replacing current appleIntelIntegratedFramebuffer.kext with version 1.4.20
* Optical Drive: Pioneer 111D fully working
|EFI works, Vanilla doesn't
|Audio needs patching
|-
|D945GTP
|Intel 945G
|
* Install Method: iATKOS or Kalyway 10.5.1 with Kalyway 10.5.2 update
* BIOS Version: Unknown; Revision: Unknown
* Audio: Sigmatel 9220 needs patch
* LAN: Intel PRO 10/100 needs patch
* SATA & IDE: SATA works, IDE not tested
|Unknown
|No
|-
|D945GCL
|Intel 945
|
*Install Method: Kalyway 10.5.2 DVD Intel_Amd
*MBR, disk name Leopard
*had to patch network and audio
*SATA and PATA work OOB
*details [http://forum.insanelymac.com/index.php?showtopic=98086&st=240&gopid=722719&#entry722719 here]
|EFI v8 and Vanilla 9.2.2  working
|needs audio and network
|-
|D915GAV
|Intel 915G
|
* Install Method: Kalyway 10.5.1 and modified 10.5.2 Combo Update. See [http://forum.insanelymac.com/index.php?showuser=123348 gizmoarena] for more info
* BIOS Version: Unknown; Revision: Unknown
* Audio: Realtek ALC882 HD works with Azaila patch
* LAN: SURECOM EP320X-R (Realtek chipset) works OOB
* SATA & IDE: Works OOB
|PC-EFI
|Audio Needs Patching
|-
|D915GAG
|Intel 915G
|
*install Method: Kalyway 10.5.2 DVD Intel_Amd
*MBR
*kernel kabyl 9.2.2
*stock options for sound and network OOB
*AppleOnboardPCATA and AppleGenericPCATA
*netkassmbios
*see [http://forum.insanelymac.com/index.php?showtopic=88125&st=100&gopid=728929&#entry728929 here] for details
|no, P4 Prescott 630
|yes
|-
|D865GLC
|Intel 865
|
* Install Method: Brazilamc Patched DVD with Kalyway 10.5.2 Updater & Brazilmac Post-Patch
* BIOS Version: Unknown; Revision: Unknown
* Audio: Works OOB
* LAN: Works OOB
* SATA & IDE: IDE works, SATA not tested 
|No
|Yes
|-
|D915GAV
|Intel 915G
|
* Install Method: Kalyway 10.5.1 and modified 10.5.2 Combo Update. See [http://forum.insanelymac.com/index.php?showuser=123348 gizmoarena] for more info
* BIOS Version: Unknown; Revision: Unknown
* Audio: Realtek ALC882 HD works with Azaila patch
* LAN: SURECOM EP320X-R (Realtek chipset) works OOB
* SATA & IDE: Works OOB
|PC-EFI
|Audio Needs Patching
|- 
|Intel DG31PR
|Intel G31- no qc/qe 
|
* Install Method: LEO4ALL V2 picked the options for Vanilla 9.2.2, sound, net
* BIOS Version: 0047; Revision: BIOS Update 0047 PRG3110H.86A
* Audio: Model, RealTek* ALC888, used alc888 patch included on DVD
* LAN: Model, RealTek* RTL 8111, used realtek patch included on DVD
* SATA & IDE: 3 sata drives all working no problems, including a ATA usb backup drive
* Optical Drive: LG IDE lightscribe works perfect with lightscribe software and toast 9
* Do shutdown, reboot and sleep work? perfect
|Yes, Yes
|Audio requires patching. Kalaway/iatkos req. the gparted method and wouldn't work with a partitioned disk but leo4all will.
|-
|DG31PR
|Intel® G31
|
* Install Method: Kalyway 10.5.2
* BIOS Version: 0047 [PRG3110H.86A ]
* Audio: Realtec ALC888, use this patch: [http://forum.insanelymac.com/index.php?showtopic=32859 AppleHDA patcher].
* Lan: Realtek* RTL8111-GR Gigabit Ethernet Controller, working OOB.
* SATA & IDE: Both are working fine OOB.
* Shutdown, sleep and reboot: Working fine.
| EFI v8 and Vanilla kernell working.
| Audio needs tweaking, use the AppleHDA patcher v1.20, with [http://psykopat.free.fr/apple/AppleHDA/realtek/alc888.txt this] file.
|-
|DG31PR
|Intel G31
|
* Install Method: Kalyway 10.5.2
* Audio: OOB main out, full op on patch mentioned above
* Lan: OOB
* SATA & IDE: OOB
* Shutdown, sleep and reboot: OOB
* Other Details: Bought this MB on account of two reviews above, very pleased indeed :) cheap and powerful.  Onboard graphics makes for a nasty CPU fanspeed and temperature, recommend separate graphics (o/b graphics untested for full boot). System profiler shows PentiumD 3.2GhZ as 100MhZ and bus speed 3.2GhZ but this is just some random glitch, benchmarks show good performance.  Up and running with no problems for over a week now.
| Vanilla kernel tested fine
| Easy audio patch (as above) - main audio out works OOB
|- 
|DG31PR
|Intel G31 Chipset
|
* Install Method: Kalyway 10.5.2
* Audio: OOB main out, Select Apple HDA during installation
* Lan: OOB
* SATA & IDE: OOB
* Shutdown, sleep and reboot: OOB
* Graphics: Nvidia XFX 8500 GT(512MB) - Works with Nvinject 512 selected during installation
* Other Details: System profiler shows Core 2 Duo (Wolfdale)  2.66Ghz as 2.66GhZ Unknown and bus speed 3.2GhZ , yet benchmarks show grea performance and in most tests out-beating results of Mac Pro. 
| Vanilla kernel works perfectly
| Everything works OOB (Be sure u selected right audio/graphics drivers when installing)
|- 
|Intel® Desktop Board DQ35JO
|Intel® Q35 Express Chipset
|
* Install Method: Kalyway 10.5.2 DVD
* BIOS Version: JOQ3510J.86A.0559.2007.0726.0425
* Audio: Realtec ALC268, use/select AppleAzalia audio driver in the installer.
* Lan: Intel® 82566DM Gigabit Ethernet Controller, currently NOT working.
* SATA & IDE: Both are working fine OOB.
* Shutdown, sleep and reboot: Working fine except sleep. But this (sleep) may depend on what you attached to your motherboard.
| EFI v8 and Vanilla kernell working.
| Audio needs tweaking, use ALC268 driver from [http://forum.insanelymac.com/index.php?showtopic=32859 AppleHDA Solution].
|- 
|D865PERL (no LAN)
|Chipset (865PE and ICH5)
|
* Install Method: Kalyway 10.5.2, Software update through to 10.5.5 w/ CPUPowerManagement disable hacks
* Audio: SoundMax Integrated Audio (included in DVD)
* LAN: D-Link DFE-530TX+ (works OOB)
* SATA & IDE: SATA and IDE work. IDE recognized as ATA Bus
* Optical Drive: LiteOn DVD Reader: Works OOB...BenQ Dual Layer DVD Burner: Works OOB...burns DL and DVDs
* GeForce 6600 AGP work using NVkush or NVinject 0.2.1
* Shutdown, Restart and Sleep work
* Other Details:
|PC-EFI work, Vanilla doesnt
|-
|DG35EC
|Chipset (G35)
|
* Install Method: Kalyway 10.5.2
* Audio: Realtek 888S does not (yet) work, but have hope
* LAN: Integrated Gbit; working with com.tootoosoft.driver.Intel82566MM driver and DeviceID hack
* SATA & IDE: SATA and IDE work, installed as AHCI
* GeForce 6600 PCIe works with EFIStudio injection
* Shutdown, Restart and Sleep work
* Other Details:
| EFI v8 and Vanilla kernell working. 
|888S Audio needs work
|-
|DG965RYCK
|Chipset (G965) with nvidia quadrofx 1400
|
* Install Method: Kalyway 10.5.2 on Pentium 4 3.2 GHz (Prescot)
* Audio: does not work, fulfilled with Creative soundblaster live with patch at found [http://download.kxproject.lugosoft.com/downloads/kXAudioDriver-1.1b0.dmg www.insanelymac.com]
* LAN: Integrated Gbit; didn't work, 3com external tx905c
* SATA & IDE: SATA and IDE work, installed as AHCI
* Shutdown, Restart and Sleep work
* Other Details: Unsupported Core 2 duo E7300 created a conflict that was resolved by downgrading the processor to E6600.
* Tested by Muhammad Anil Babur Kiani
| EFI v8 and sleep, Vanilla, modbin kernell working. 
| Samsung LCD syncmaster auto profile.
|}

=== Jetway===

{| class="wikitable" width="100%"
!Hardware Name 
!Chipset
!Notes
!EFI/Vanilla kernel working
!Fully Working w/o Patch
|-
|Jetway 945GCDMS-6H
|Intel 945GC + ICH7 Chipset
|
* Install Method: Kalyway 10.5.1 Installed and Update to Kalyway Hack 10.5.2 Combo Update
* BIOS Version:; BIOS Revision A03
* Audio: Onboard Realtek ALC883 Needs patching in order to work, after patching it will work!
* LAN: Realtek 8100C Works out of the Box detected as Realtek 8139
* SATA & IDE: SATA and IDE Works out of the Box
* Very perfect motherboard for a hackintosh, Using Core 2 Duo E4300 1.8GHz Pretty fast for Leopard! Like a real mac! =) and very cheap motherboard too!
|Works Perfectly
|Yes
|-
|}.

=== MSI ===

{| class="wikitable" width="100%"
!Mainbord 
!Chipset
!Notes
!EFI/Vanilla kernel working
!Fully Working w/o Patch
|-
|G31TM-P21 Micro ATX
|Intel G31 Express Chipset
|Method: Kalyway 10.5.2 DVD Intel AMD / Leo4All 10.5.2 / iATKOS V7 with Chameleon V2 and V1 
*Intel C2D E7900 @2.93ghz and 2 Gb PC2 5300 DDR
*Fails on all flavors
*Better results after removing ATi Radeon 3870 - But still fails
|Voodoo 9.5 and Voodoo 9.7 + Seatbelt Fix are the only ones I remember, I tried 8 hours worth of combinations
|NO - This entry is for anyone trying to use OSX86 on this type of Motherboard, the BIOS is too limited in options to allow you to boot into any flavor of OSX.  It will boot off cd, and install, partition...etc..but will not work. DOES NOT WORK , for example here: [http://www.youtube.com/watch?v=lkQBt-4wvQM]
|-
|P35 Neo-F
|P35 / ICH9
|
* board does not work with standard BIOS from MSI
* I was lucky to find someone who did the trick and now have it running with a moded BIOS
* You can find the moded BIOS here: [http://rapidshare.com/files/107426218/MSI_P35_Neo_7360v17_mod.zip.html]
* Install Method: Kalyway 10.5.2 no patches
* Onboard Works(Except Input)
* Ehternet: Works (sometimes doesn't, still trying to figure out the problem)
* USB: Works (sometimes doesn't, still trying to figure out the problem)
* SATA: Works
* IDE: doesn't work
|EFI+Vanilla Working with E8200
|No patches needed
|-

|915PL Neo-V
|915PL
|
* Install Method: Kalyway 10.5.2 DVD
*BIOS Version: latest; 
*Revision: Unknown 
*LAN: works without problem
*Audio: Works with kalyway out-of-box
*USB: works perfectly
*SATA: Works
*IDE: Works
|
|
|-
|945PL Neo
|945PL / ICH7
|
* Install Method: Iatkos 5i
* BIOS Version: Stock
* Revision: Unknown
* LAN: Appears to work, but not tested.
* Audio: Works with patch: [http://forum.insanelymac.com/index.php?showtopic=142666]
* USB: Works for front ports and 2 out of 4 rear ports.
* SATA: Works
* IDE: Works
| EFI Works, used Voodoo kernel.
| No, needs patch for audio.
|-
|K9N Diamond (MS-7226)
|nForce 590 SLI / MCP61
|
*Install Method: Leo4All v.3 with amd pathches
*Install method Leo4all v.3
*Installed using 9.2.0 kernel by netkas
*BIOS version: 1.8
*Revision: A2
*Lan: works 100% with forcedeth(included in leo4all)
*Audio: doesnt work anyway(Creative SB live! 24bit)
*USB: workin OOB
*SATA: works
*IDE: works
*Fireware: works OOB
|Vanilla kernel not tested
|no, audio need drivers
|-
|K9N Platinum
|nForce 570
|
* Install Method: Kalyway 10.5.2 With AMD Patches, Realtech Audio Drivers, USB-Ehci fix on insanelymac forum.
*Install Method: Kalyway 10.5.1 & Combo Update.
*Installed using Vanilla Kernel, and EFI Complete Install and Reboot Use -x on first boot Setup First boot in safemode. 
*BIOS Version: Unknown; 
*Revision: Unknown 
*LAN: unknown 
*Audio: Works with kalyway included drivers
*USB: Works with USB-Ehci kext replacement (you can find it on: insanelymac forum.)
*SATA: Works
*IDE: Works
|EFI+Vanilla Works
|Kalyways included AMD Patches, Realtech audio drivers & USB-EHCI Fix on insanelymac forum.
|-
|P35 NEO 3-F
|Intel P35 / ICH9
|
* Install method: Kalyway 10.5.2
* BIOS AMI version 1.12
* works only with SEE2-Patch
* Audio ALC888 does not work
* Ethernet RTL8111 works with RTL1000-Patch
* USB works
* SATA works
* Video ATI Radeon HD2600 PCIE works with ATI-Patch
* IDE not tested
|EFI+Vanilla working with E6750
|Patches for Audio, SEE2 support, ATI and Ethernet needed
|-
|P45 NEO 3-F
|Intel P45 / ICH10
|
* Install method: Kalyway 10.5.2
* BIOS AMI version 1.12
* works only with JAS1048SSE2 selected
* Audio ALC888 works with AppleHDA.kext and HDAPatcher.kext
* Ethernet RTL8111 works out of the box
* USB works
* SATA working with AHCI and APIC selected in BIOS
* Video Galaxy GeForce 9500 GT displays all resolutions but no QE using guide: [http://www.insanelymac.com/forum/lofiversion/index.php/t139775.html]
* IDE working
|Vanilla working
|Patches for Galaxy GeForce 9500 GT needed
|-
|P965 Neo2 -FI
|P965 / ICH8
|
* Install Method: Leo4All 10.5.2 vanilla, EFI MBR
* Onboard audio disabled (b/c of USB external sound here)
* BIOS 3.8 WORK! (Only when DOT is CPU ONLY and set to 1%)
* LAN, SATA work(tested with 1 HDD,1 DVD-RW), IDE not tested
|EFI+Vanilla working with E8200
|Onboard audio need patch
|-
|P965 Neo2(-FI)
|965 / ICH8
|
* Install Method: Kalyway 10.5.1 EFI Guid (updated to vanilla 10.5.2
* Audio needs ALC888+Azalia Driver from [http://forum.insanelymac.com/index.php?showtopic=36520 here]
* BIOS Ver: 3.7 (3.8 DOES NOT WORK!)
* The rest all works out of the box except IDE and the 5th SATA port because its on the same chip as IDE (Marvell ® 88SE6111)
* [http://global.msi.com.tw/index.php?func=proddesc&prod_no=1163&maincat_no=1&cat2_no=170 link to motherboard overview]
|EFI+vanilla working on my Core 2 Quad Q6600
|No, Everything works, except IDE and audio needs ALC888+Azalia patch
|-
|P965 Neo
|965 / ICH8
|
* Install Method: Kalyway 10.5.1 Efi Guid or MBR
* Audio needs ALC883 Driver from install DVD
* BIOS Ver: Latest
* LAN (Realtek 8110SC) Works out of the box
* No IDE support (Because of JMicron Chip) All drives should be sata, All IDE should be empty. IDE DVD in USB external Box return /com.apple.Boot error.
* Disable Lan Option ROM from BIOS settings
|EFI working, Vanilla unknown
|No, Everything works, except audio needs ALC883 driver from Kalyway DVD
|-
|975X Platinum Power Up
|965 / ICH8
|
* Install Method: iatkos v1.0i + Kallyway 10.5.2 Update - vanilla, EFI MBR
* Onboard audio working 
* LAN, SATA, IDE work
|-
|945GM3-F
|945 / ICH7
|
* Install Method: Kalyway & vanila_acpi_fix
* BIOS Version:; Revision:
* Audio: Realtek Audio works with Azalia
* LAN: Realtek LAN works OOB
* SATA & IDE: SATA works
|Unknown
|Audio needs patching
|-
|P965 Platinum(-FI)
|965 / ICH8
|
* Install Method: Kalyway 10.5.1 EFI Guid (updated to vanilla 10.5.2
* Audio needs ALC888+Azalia Driver from [http://forum.insanelymac.com/index.php?showtopic=36520 here]
* BIOS Ver: 1.6 (1.8 DOES NOT WORK!)
|EFI+netkas 10.5.2 kernel or toh
|No, Everything works, except IDE and audio needs ALC888+Azalia patch
|-
|MSI-7223/915GVM3-V
|Intel 915GV / ICH6
|Install method: Kalyway 10.5.2
*Everything except onboard video works. Out/In put's on audio work fine.
*Onboard (GMA900) doesn't work due to being too old for leopard.
|Unknown
|Yes, except for onboard video (Not supported).
|-
|K9N SLI-2F
|nForce 570 SLI MCP 
|
* Install Method: Zephyroth 10.5.2 Install DVD
* BIOS Version: 3.70; Revision: Unknown
* Audio: Works after patching using AppleHDA Patcher 1.17 with ALC883 linux codec dump from [http://psykopat.free.fr/apple/AppleHDA/realtek/ here]
* LAN: Doesn't work
* SATA & IDE: SATA works with nForce Chipset Drivers, IDE works OOB
* Optical Drive: LITE-ON LH-18A1H works
|Unknown
|No, LAN doesn't work, Audio needs patch
|-
|K9N6SGM-V
|MCP61 (nForce 4 & 6100 video)
|
* Install Method: Zephyroth 10.5.2 for AMD
* BIOS Version: 052207; Revision: Unknown
* Audio: ALC883, patch on DVD does not work, Taruga ALC883 works for output (input not tested, but recognized) 
* LAN: Doesn't work
* SATA & IDE: Both work OOB
* Using 9.2 on Zephyroth enables USB
* Not selecting a kernel during install allows Apple updates, but no USB
|No
|Audio needs patch, LAN doesn't work
|-
|K8N NEO4 FI 
|NFORCE4
|  
* Install method Leo4Allv2 Kernel during installation
* BIOS unknown
|NETKAS
|Need no Patches everything works
|-
|P6N Diamond
|680i
|
* Install Method: Kalyway 10.5.2 Intel DVD (TPB)
* BIOS Version: v1.3; Revision: Unknown
* Audio: On-board Creative X-Fi xtreme audio DOES NOT WORK WHAT-SO-EVER. USB Audio, like a headset, will work though. 
* LAN: On-board LAN, works with driver "forcedeth". Has some issues when dual-booting with Windows Vista. 
* SATA & IDE: Everything works perfectly. Just make sure if you dual/triple-boot to shutdown your other OS's completely or OSX cannot read. I use Ext2FS for my Linux partition and NTFS-3g for my Vista partition. All work fine. 
* Optical Drive: SONY DVD-RW DRU-540A. Works fine.
* Do shutdown, reboot and sleep work? Yes, have not tested sleep. 
* Sleep, Speedstep, nForce, and Modbin kernels all work. Vanilla and kabyl kernels do not work.
|PC-EFI works. Vanilla Kernel does not.
|No patching required.  
|-
|P6N SLI
|nVidia 650i
|
* Install Method: Kalyway 10.5.2 Intel/AMD DVD
* BIOS Version: v2.2; Revision: 06/18/2007
* Audio: On-board nForce Audio ALC888 Codec works like a charm OTB
* LAN: On-board LAN cannot receive data, not working. Tried with up-to-date "forcedeth".
* SATA & IDE: Everything works perfectly. Installed to IDE just to make sure. Couldn't install from SATA DVD drive but maybe that was because I used a DVD+RW
* Optical Drive: SATA works fine
* External Firewire drives work fine.
* Low-speed USB mice and wacom tablets work fine.
* High-speed USB devices (ex: external drives) need patch (see notes)
* Do shutdown, reboot and sleep work? Yes, have not tested sleep. Update: sleep doesn't work.
* I use the nforce kernel, haven't tried the others.
|PC-EFI works. Vanilla Kernel does not.
|
* Make sure the vanilla kernel option is UNchecked during the install. 
* High-speed USB devices do not work. You need to install the "usb_fix_1.3.mpkg.zip" from [http://forum.insanelymac.com/index.php?showtopic=95789&st) here]
* No patching required. You _have_to use BIOS version 2.2 though. 2.1 will force you to use cpus=1, 2.5 (the latest) would hang the kernel at the memory prompt.
* For those who want to update to 10.5.3, the "JaS 10.5.3 combo update" worked like a charm, the "kalyway 10.5.3 comboupdate" crashed and messed-up the OS.
|-
|Neo2-Digital K9AG
|AMD RS690G
|
* Install Method: Zephyroth 10.5.2 V1 for AMD & 9.2.0 Kernel during installation
* BIOS Version: 1.14
* Audio: Realtek ALC888 works with ALC888Audio.mpkg
* LAN: Realtek RTL8111B
* SATA & IDE: Work
* Optical Drive: TSSTcorpCD/DVDW SH-S183A works fine
* Shutdown & Reboot work, Sleep not tested
|Unknown
|Audio needs patching
|-
|G31M2
|Intel IG31 ICH7
|
* Install Method: Leopard Retail + Updated to 10.5.3
* Bios Version: 7383v52 [http://osrom.net/biosmod/ here]
* Audio: Realtek ALC888 Works with AppleAzaliaAudio
* LAN: Realtek RTL8111B Works OOB
* STATA & IDE: Works OOB
* Optical Drive: Pioneer DVR-213NP SATA
* VGA: Used nVidia GeForce 7600GT PCIe (gfxutil efi mode)
* Shutdown & Reboot work, Sleep not working
|PCEFI & Vanilla Kernel
|Audio needs AppleAzaliaAudio
|-
|MS-7058
|Intel i915P/i915G
|
* Install Method: Kalyway 10.5.2 Intel DVD
* Bios Version: 1.9B0
* Audio: CMedia 9880
* LAN: Marvell Yukon 88E053 PCI-E Gigabit Ethernet Controler
* STATA & IDE: Works.
* VGA: Used nVidia GeForce 6600 PCIe
|Sleep Kernel
|Audio: Works with default drivers (Azalia High Definition)
|-
|MSI PM8PM -V
|VIA
|
*Install Method: Kalway 10.5.2 Intel/AMD
*Install methodKalway 10.5.2
*Installed using 9.2.0 kernel by netkas (sleep )
*BIOS version: Latest
*Revision: Latest
*Lan: need pacthes
*Audio: Work OOTB(line-in spdif mic: work )
*USB: working b4 boot ( need usbfix )
*SATA: works ( select all chipset )
*IDE: works
*Fireware: none
|Vanilla kernel not tested ( using sleep kernel )
|Yes ( 2.1 channel )
|-
|MSI PM8PM -V
|VIA P4M800Pro / VT8237R plus
|
*HARDWARE USED
*Pentium 4 3.0GHz
*Memory: 1Gb DDR2
*Video : S3 UniChrome Pro IGP 64mb on board
*Keyboard and mouse: USB both
*HDD : IDE
*Install Method: Kalway 10.5.2 Intel/AMD
*Installed using 9.2.0 kernel sleep
*SATA,IDE,AUDIO: Use appleVIAATA in DVD
*Lan: need external kext, use viarhine_rel.tar.gz from [http://www.insanelymac.com/forum/index.php?act=attach&type=post&id=24623 here]
*Audio:to fix mono audio use AppleAC97Audio.zip from [http://www.insanelymac.com/forum/index.php?act=attach&type=post&id=2367 here]
*USB: use USBfix on DVD
*Fireware: none
|Vanilla kernel doesn't work
|
*Audio: works
*Lan: works
*Everything works great!!
*Video resolution 1280x1024 just edit com.apple.Boot.plist , No acceleration en 2D and 3D and other skills cause S3 UniChrome Pro IGP driver doesn't have support on Mac,by default kalyway use VESA generic drivers =(
|} .

=== Shuttle ===


{| class="wikitable" width="100%"
!Hardware Name 
!Chipset
!Notes
!EFI/Vanilla kernel working
!Fully Working w/o Patch
|-
|Shuttle XPC SD30G2 Plus
|Intel 945GC/ICH7
|
* Install Method: Kalyway 10.5.2
* BIOS Version: Unknown
* Audio: Fully Supported (Audio Output Only)
* LAN: Fully Supported 10/100/1000 (Marvell Kalyway Driver)
* SATA & IDE: Both Fully Supported (No JMicron Here)
* USB: Fully Supported (All Six Ports)
* Firewire: Fully Supported (Front & Rear)
* Restart, Shutdown, Sleep Fully Supported with ToH Sleep Kernel
|PC-EFI works
|Needs Replacement AppleFrameBuffer Kext for QE/CI and Resolution Change with Intel GMA 950 Graphics
|-
|Shuttle XPC Prima SP35P2V2
|Intel P35/ICH9R
|
* Install Method: iDeneb
* BIOS Version: Stock
* Audio: Fully Supported OOB (Analog and Optical with 5.1)
* LAN: Fully Supported 10/100/1000 (AppleYukon2)
* SATA & IDE: Both Fully Supported (IDE with jmicron)
* USB: All ports fully operational
* Restart and shutdown both seem to work perfectly.
* Graphics: nVidia eVGA 8600 GT 256MB (256-P2-N751-TR) pci-e works perfectly with nvkush from iDeneb disc.
* SATA controller using Legacy mode and ACHI.  iDeneb 10.5.5 works perfectly OOB.
|Using vanilla kernel & Chameleon
|Yes
|}  .

=== Supermicro ===


{| class="wikitable" width="100%"
!Hardware Name 
!Chipset
!Notes
!EFI/Vanilla kernel working
!Fully Working w/o Patch
|-
|X7DAL-E
|Intel 5000X
|
* Install Method: Kalyway
* BIOS Version: Unknown; Revision: 1.3c
* Audio: Not Tested, Using Sound Card
* LAN: Not Tested
* SATA & IDE: Work OOB
|PC-EFI works
|Audio & LAN not tested
|-
|X7DWA-N
|Intel 54000
|
* Install Method: Kalyway 10.5.1 + Kalyway 10.5.2 updater + Kalyway Kernel patch
* BIOS Version: Revision: 1.0b
* Audio: Reaktek 65535 - Works fine using the patch on Kalyway disc
* LAN: NOT working yet
* SATA & IDE: Work OOB
|PC-EFI works
|
* Audio needed patch (on Kalyway disc)
* Intel 82575 EB Gigabit lan adapter not working yet
|-
|Unknown
|
|
* Install Method: Retail DVD & Patches
* BIOS Version: F2; Revision: 2.1 Revision 2 Bios F7
* Audio: Works with patch
* LAN: Works out of the box
* SATA & IDE: SATA works OOB, IDE with Patch
* Istall[http://forum.insanelymac.com/index.php?s=262c6b2d04228b830079474b8f2c6c4a&showtopic=76404 Guide]
* Complete Install guide [http://forum.insanelymac.com/index.php?showtopic=86167 here]
|Yes
|No. Audio works with Patch
|-
|Asus A8N Fatal1ty SLI
|nForce 4 
|
* Install Method: Zephyroth 10.5.2 rev 1 6a61fa1bc-21 (latest from uabit.com)
* BIOS Version: 6a61fa1bc-21 (latest from uabit.com)
* Audio: No Onboard Audio, using PCI card
* LAN: forcedepth driver was working last time i tried
* SATA & IDE: main drive hooked up to main IDE, storage drive hooked up to first SATA port, not added later until install was stable. dvd (slave) and dvd burner (master) are on second IDE port
* USB/Firewire 400: needed a general usb kext, googled "usb kext for leopard" firewire worked out of box.
* Do not forget to repair permissions after install, then run marvins if u got amd
* software updates cause firewire to stop working along with ps/2 port! clear cmos jumper fixed this, unsure of cause
* Use -x on first boot
* set master jumper on ide hdd as well
* Setup First boot in safemode
* Use kexthelper to get that usb kext installed. also google "time machine fix"
|EFI & Vanilla Kernel works
|
|}

=== TYAN ===


{| class="wikitable" width="100%"
!Hardware Name 
!Chipset
!Notes
!EFI/Vanilla kernel working
!Fully Working w/o Patch
|-
|i5000XT S2696WA2NRF
|Intel 5000X
|
* Install Method: Leo4All v3 10.5.2
* SATA HDD accidentally formatted with Apple Partition Table so system boots only with DVD. 
* Audio: fully working with ALC888 patch from Leo4All v3
* LAN: Both ports fully working without any patches
* SATA-2: Works OOB
* SAS: Works with SAS Chipset driver from Leo4All v3
* About this Mac patch for Sysinfo.
* 1 x Firewire (front header) works
* 8 x USB works
* you will need a PS/2 keyboard for typing boot options.
* Conclusion: rock solid ProSystem with a Quad Clovertown Xeon, runs all Pro apps flawlessly!
|PC-EFI not working, boots HDD system with Darwin from DVD
|Audio needs patching, SAS-Driver has to be added
|} . . . . .


=== XFX nForce Series===


{| class="wikitable" width="100%"
!Hardware Name 
!Chipset
!Notes
!EFI/Vanilla kernel working
!Fully Working w/o Patch 
|-
|nForce 780i 3-Way SLI
|ICH9 (I think)
|
* Install Instructions:
*# Formatted HFS+ and then partitioned 300GB into Mac OS X Extended (Journaled) and 200GB into FAT (for Windows later)
*# Installed using Vanilla Kernel, and using both Natit and NVInject kexts...display works fine in 1440x900 and other resolutions
*# Complete Install and Reboot
*# Once you reboot, go into Bios and disable second CPU core (or it will be unstable and freeze under heavy loads)
*# If you are having root device not found issues or install can't find the HD to install on (SATA), make sure your eSATA is turned on for device 0.  Interesting tip, don't plug the SATA plug into the 4 plugs by the graphics card, it has to be in the top plug on the 2 SATA plugs facing verticle out the front of the machine (if that makes any sense)
*# Use -v on first boot if you want, but it was not necessary for me.
Get kexthelperB7 to install kexts from [http://cheetha.net/ here] if you want to try and get the Lan working or fix the 1 channel audio.  This was just an impatient test to see if it would work.  I have a Asus P5B coming in that will hopefully work OOB with minor difficulties.  
|Yes
|Audio needs patching if you want more than 1 channel, LAN needs patching
|- . . .
|} . . . . . . . . . . . .

==Processors==

===AMD===

{| class="wikitable" width="100%"
! Model
! Notes
! Recognized as
! Fully Working w/o Patch
|-
|AMD Sempron LE-1100 Socket AM2
|Working 
|1.9 GHz Unknown
|Yes
|-
|AMD Sempron 3000+ Socket 754
|Working 
|AMD Sempron(tm) Processor 3000+
|Yes
|-
|AMD Athlon 64 3000+ Socket 754
|Working
|2GHz Unknown
|Yes
|-
|AMD Athlon 64 3000+ Socket 939
|Working
|1.8GHz Unknown
|Yes
|-
|AMD Athlon 64 3200+
|Working
|2GHz Unknown
|Yes
|-
|AMD Athlon 64 3500+
|Working
|Unknown
|Yes
|-
|AMD Athlon 64 3500+
|Working
|AMD Athlon™ 64 Processor 3500+
|Yes
|-
|AMD Athlon 64 3700+ Socket 754
|Working
|2.4 GHz Unknown
|Yes
|-
|AMD Athlon 64 X2 3600+ (90nm , Windsor)
|Working
|2 GHz AMD Athlon™ 64 X2 Dual Core Processor 3600+
|Yes
|-
|AMD Athlon 64 X2 3600+
|Working 
|2.10 Ghz Unknown 
|Yes
|-
|AMD Athlon 64 X2 3800+ @ 3.0Ghz
|Working
|1.94 GHz Unknown
|Yes
|-
|AMD Athlon 64 X2 4000+
|Working
|2.1 GHz Unknown
|Yes
|-
|AMD Athlon 64 X2 4000+
|
|Intel Core 2 Duo 3.7GHz
|[http://code.google.com/p/xnu-dev/v[Voodoo Kernel v1 Rev A]]
|-
|AMD Athlon 64 X2 4200+
|Working
|2.2 GHz Unknown
|Yes
|-
|AMD Athlon 64 X2 4400+
|Working
|2.31 GHz Unknown
|Yes
|-
|AMD Athlon 64 X2 4600+
|Working
|2.2 GHz Unknown
|Yes
|-
|AMD Athlon 64 X2 4800+
|Working
|2.5 GHz Unknown
|Yes
|-
|AMD Athlon 64 X2 4850e+
|Working
|2.5 GHz Unknown
|Yes
|-
|AMD Athlon 64 X2 5000+ Black Edition (Socket AM2)
|Working
|2.6 GHz Unknown
|Yes
|-
|AMD Athlon 64 X2 5200+
|Working
|2.6Ghz Unknown
|Yes
|-
|-
|AMD Athlon 64 X2 5200+(65nm Brisbane)
|Working
|2.7GHz AMD Athlon™ 64 X2 Dual Core Processor 5200+
|Yes
|-

|AMD Athlon 64 X2 5600+
|Working
|2.81 Ghz Unknown
|Yes
|-
|AMD Athlon 64 X2 6000+ 
|Working
|3.02GHz AMD Athlon™ 64 X2 Dual Core Processor 6000+
|Yes
|-
|AMD Athlon 64 X2 6400+ 
|Working
|2.01 GHz Unknown
|Yes
|-
|AMD Athlon 64 II x2 220
|Working with Maverick 10.9 (test on Niresh's 10.9)
|2.8 GHz
|Yes, with keys (amd, arch=x86_64, npci=0x2000, another keys look at your computer) 
|-
|AMD Athlon 64 LE1620 Socket AM2
|Working 
|2.6 GHz
|Yes
|-
|AMD Turion 64 X2 TL-50
|Working with AMD fix with iDeneb v1 and Leo4All v4.1 for the HP dv6000 and some dv9000 series notebooks.  Others may work as well.
|1.6 GHz AMD Turion 64 X2 Mobile Technology TL-50
|Yes, with "AMD fix" selected during install
|-
|AMD Phenom X4 9550
|FULLY WORKING with AMD fix with iDeneb v1.3
|-
|}

===Intel===

{| class="wikitable" width="100%"
! Model
! Notes
! Recognized as
! Fully Working w/o Patch
|-
|Intel Celeron 320
|Working
|2.4GHz Unknown
|Yes
|-
|Intel Celeron D 346
|Working
|3,06GHz Unknown
|Yes
|-
|Intel Celeron D 336
|Working
|2.8 GHz Unknown
|Yes
|-
|Intel Celeron 420
|Working
|1.6GHz Unknown
|Yes
|-
|Intel Celeron 430
|Working
|1.8 GHz Intel Core Solo
|Yes
|-
|Intel Celeron M420
|Working
|1.6 GHz Unknown
|Yes
|-
|Intel Celeron D 350
|Working
|2.8 GHz Unknown
|Yes
|-
|Intel Pentium 4 Prescott 2.8GHz
|Working
|Intel 2.8Ghz Unknown
|Yes
|-
|Intel Pentium 4 Prescott 3.0GHz HT
|Working
|3.0GHz Unknown
|Yes
|-
|-
|Pentium® 4 630 (Prescott)
|Working
|Unknown
|Yes (ToH kernel)
|-
|Intel Pentium 4 540 (Prescott)
|Working
|3.2GHz Unknown
|Yes
|-
|Intel Pentium 4 HT
|Working
|3.2Ghz Unknown
|Yes
|-
|Intel Pentium 4 3GHz HT
|Working
|3GHz Unknown
|Yes
|-
|Intel Pentium 4 3GHz
|Working
|3.6GHz Unknown
|Yes
|-
|Intel Pentium 4 660 3.60GHz
|Working
|3.6 GHz 
|Yes (Kalyway_10.5.2; kernel_9.2_speedstep)
|-
|Intel Pentium D 2.8GHz
|Working
|Unknown
|Yes
|-
|Intel Pentium D 3.4GHz
|Working
|Unknown
|Yes
|-
|Intel Pentium D 820
|Working
|Unknown
|Yes
|-
|Intel Pentium D 915
|Working
|2.8GHz Unknown
|Yes
|-
|Intel Pentium D 9325 Presler
|Working
|3GHz Unknown
|Yes
|-
|Intel Pentium D 930
|Working
|3GHz Unknown
|Yes
|-
|Pentium® D 935 (Presler)
|Working
|Unknown
|Yes (ToH kernel)
|-
|Intel Pentium D 950
|Working
|Unknown
|Yes
|-
|Celeron Dual-Core E1200 1.6ghz
|Working
|1.6 GHz Intel Core 2 Duo
|Yes
|-
|Pentium Dual-Core E2140 1.6ghz
|Working
|1.6 GHz Intel Core 2 Duo
|Yes
|-
|Pentium Dual-Core E2140 1.6GHz
|Clocked at 1.84GHz
|1.84GHz Intel Core 2 Duo
|Yes
|-
|Pentium Dual-Core E2160 1.8ghz
|Working
|1.8 GHz Intel Core 2 Duo
|Yes
|-
|Pentium Dual-Core E2180 2.0GHz
|Working
|2.0 GHz Intel Core 2 Duo
|Yes
|-
|Pentium Dual-Core E2200 2.2ghz
|Working
|2.2 GHz Intel Core 2 Duo
|Yes
|-
|Pentium Dual-Core E5200 2.5GHz
|Working
|2.5 GHz Unknown
|Yes
|-
|Intel Core Duo T2400 1.83GHz
|Working
|2.0 GHz Intel Core Duo
|Yes
|-
|Intel Core Duo T7200
|Working
|2.0GHz Unknown
|Yes
|-
|Intel Core 2 Duo T7250
|Working
|2.0 GHz Intel Core 2 Duo
|Yes
|-
|Intel Core 2 Duo T7500
|Working
|2.19GHz Unknown, reported correctly in System Profiler + Features.
|Yes
|-
|Intel Core 2 Duo E4300, Allendale
|Working
|1.8GHz Intel Core 2 Duo
|Yes
|-
|Intel Core 2 Duo E4400, Allendale
|Working
|2.0GHz Intel Core 2 Duo
|Yes
|-
|Intel Core 2 Duo E4500, Allendale
|Working
|2.2GHz Intel Core 2 Duo
|Yes
|-
|Intel Core 2 Duo E4600
|Working
|2.4GHz Intel Core 2 Duo
|Yes
|-
|Intel Xeon E5410 (Dual Quad-Core)
|Working
|2.33GHz, 2 Processors, 8 Cores
|Yes
|-
|Intel Core 2 Duo E6300, Conroe
|Working
|1.86GHz Core 2 Duo
|Yes
|-
|Intel Core 2 Duo E6300
|Working
|Core 2 Duo 2.8Ghz
|Yes
|-
|Intel Core 2 Duo E6320
|Working
|Intel® Core(TM)2 CPU 6320 @ 2.69GHz (slightly OCed...)
|Yes
|-
|Intel Core 2 Duo E6400
|Working
|2.13 Ghz Intel Core 2 Duo
|Yes
|-
|Intel Core 2 Duo E6420
|Working
|2.13 Ghz Intel Core 2 Duo
|Yes
|-
|Intel Core 2 Duo E6550
|Working
|2.33 Ghz Intel Core 2 Duo
|Yes (Vanilla Kernel)
|-
|Intel Core 2 Duo E6600
|Working
|2.4 GHz Intel Core 2 Duo
|Yes (Vanilla Kernel)
|-
|Intel Core 2 Duo E6600
|Working (Overclocked)
|3.0 GHz Intel Core 2 Duo
|Yes (Vanilla Kernel)
|-
|Intel Core 2 Duo E6750
|Working
|2.67 GHz Intel Core 2 Duo
|Yes (vanilla kernel)
|-
|Intel Core 2 Duo E6850
|Working
|3GHz Intel Core 2 Duo
|Yes (Vanilla Kernel)
|-
|Intel Core 2 Duo E7200
|Working
|2.53 Ghz Intel Core 2 Duo E7200
|Yes, works with Kalyway, iDeneb, Jas and Leo4all with Vanilla Kernel
|-
|Intel Core 2 Duo E7500
|Working
|2.93 Ghz Intel Core 2 Duo E7500
|Yes Shown as "3 GHz Unknown" 1 cores, works with Kalyway tested by [http://www.facebook.com/profile.php?id=1343186070&ref=profile Muhammad Anil Babur Kiani]
|-

|Intel Core 2 Duo E8200
|Working
|Intel Unknown @ 2.67 GHz
|Yes
|-
|Intel Core 2 Duo E8400
|Clocked at 4 GHz
|Shown as "4 GHz Unknown"
|Yes (Vanilla Kernel)
|-
|Intel Core 2 Duo E8500
|Working
|3.16GHz Intel Core 2 Duo E8500
|Yes (Vanilla Kernel)
|-

|Intel Core 2 Quad Q6600
|Working
|2.4 GHz Unknown. [[Apple hardware|Apple never adapted]] Q6600 on their machines and that is why it shows unknown. But the processor is working fine (at least on mine). To fix this, change "Unknown" to "Intel Core 2 Quad" in /System/Library/CoreServices/Resources/English.lproj/AppleSystemInfo.string and verify if About This Mac displays what you just edit.
|Yes
|-
|Intel Core 2 Quad Q6700
|Working
|2.66 ghz Unknown
|Yes
|-
|Intel Core 2 Quad Q8200
|Working
|2.33 GHz Unknown. Use the previously mentioned AppleSystemInfo.string edit (see Q6600) or use Pcwiz's osx86 tools to edit the name.
|Yes (Vanilla Kernel)
|-
|Intel Core 2 Quad Q9300
|Working
|Unknown 2.5ghz
|Yes but cannot get Temperature Monitor to show core temperatures :(
|-
|Intel Core 2 Quad Q9450 (Engineer Sample B1 version)
|Working
|Genuine Intel CPU 2.66GHz 3.2Ghz
|Yes (Vanilla Kernel)
|-
|Intel Core 2 Quad Q9450 @ 3 GHz tray
|Working
|3 GHz unkown
|Yes (Vanilla Kernel)
|-
|Intel Core 2 Extreme QX9650
|Working
|Not checked
|Yes
|-
|Intel Xeon E3110
|Working, Xeon version of E8400
|3.0 GHz Unknown
|Yes
|-
|Intel Xeon 5405
|Working
|2GHz Unknown
|Yes
|-
|Intel Xeon 5410
|Working
|4GHz Unknown [is 4x2.33]
|Yes
|-
|} . .

==Graphics Cards== 
Please specify if your card is AGP, Integrated, PCI or PCI-E.<br />
Also, place chip and board manufacturer in their respective column.

===AGP===

====ATI====

{| class="wikitable" width="100%"
|-
!Hardware Name
!Board-Manufacturer
!Notes 
!QE / CI
!Resolution
!Fully Working w/o Patch
|-
|Sapphire X1550 512MB
|GeCube
|Used NatitX1300
|Yes
|All
|Needs Patching
|-
|X1950 Pro 256MB
|GeCube
|Bronya's 7280 driver for 10.5.2; BIOS flashed as a PowerColor card
|Yes
|All
|Needs Patching
|-
|Radeon 9600 Pro 256MB
|Sapphire
|Impossible to get QE/CI due to PowerPC arcitecture in the required kexts.
|No
|All (Using Callisto b008)
|No
|-
|Radeon HD 2600 Pro 512MB
|Sapphire
|Driver fom Kalyway 10-5-2 DVD
|Yes
|All
|Yes
|-
|Radeon 9600 XT 128MB
|Sapphire
|Callisto driver 008
|Yes
|All
|No needs patching
|}  .

====nVidia====

{| class="wikitable" width="100%"
|-
!Hardware Name
!Board-Manufacturer
!Notes 
!QE / CI
!Resolution
!Fully Working w/o Patch
|-
|GeForce 6200A
|Zorg
|Used NVInject
|Unknown
|Yes
|Unknown
|-
|nVidia GeForce 6800 OC
|nVidia
|Working with NVInject 0.1.3
|Both
|1280x1024
|No
|-
|nVidia GeForce 6800 GS OC
|BFG
|Working with NVInject 0.2.1, 256mb (installed from Leo4Allv2 dvd)
|Both
|1280x1024
|No
|-
|GeForce 6800 XT 256MB AGP
|Biostar
|Works with NVInject and Titan
|Both
|All
|No
|-
|GeForce 6800 XT 256MB AGP
|XFX
|Works with NVInject (Leopard-Only Version from NvInject[http://nvinject.free.fr/]). No AGPgart Installed, NVCAP changed to Dual-dvi both channels setting. Dual monitor and TV-out not tested.
|Both
|All
|No,
|-
|GeForce FX5200
|Palit
|Works with Brazilmac
|Both
|All
|Yes
|-
|GeForce 6600GT 128MB
|MSI
|Working with NVInject 128 on Kalyway 10.5.2
|both
|1680x1050
|yes
|-
|GeForce 6200
|XFX
|Working with Titan
|Both
|All
|No, needs Titan
|-
|GeForce 4mx 440 AGP8X
|Biostar
|Working with Natit installer
|No QE/ Software CI
|All
|No
|-
|GeForce 6200 256Mb AGP8X 64-bit
|PNY
|Works with NVinject.0.2.1_512Mb (kalyway 10.5.2)
|Both
|All + dual
|No, needs NVinject
|-
|GeForce 6600 AGP 128MB
|Inno3D
|Works with NVinject 0.2.1 or NVKush
|QE/CI works
|Yes
|No QE/CI and Resolution Change without NVinject or NVKush 
|-
|}  .

===PCI Express===

====ATI====

{| class="wikitable" width="100%"
|-
!Hardware Name
!Board-Manufacturer
!Notes 
!QE / CI
!Resolution
!Fully Working w/o Patch
|-
|Radeon X1900XTX 512MB
|ATI
|iDenbe 10.5.5, DPCIManager: 1002:7249 ATI Technologies Inc R580 [Radeon X1900 XT] (Primary). Had to add Natit.kext to get all resolutions up to 1920x1200
|YES BOTH 
|1024x786  
|NO
|-
|Radeon X1300 Pro 256MB
|ATI
|Works with the NatitX1300 r1v1 Installer [http://rapidshare.com/files/112931217/NatitX1300.r1v1.Installer.zip.html Download]
|Both
|All Resolutions
|No, not fully. You can just use DVI - but there's no prob to adapt it.
|-
|ASUS EAX1600 Pro 256MB
|ASUS
|Works with manual modify the video kext with your id]
|Both
|All Resolutions
|fully working.
|-
|Radeon X1600P 256MB
|ATI
|Used Maclovin's patch from [http://forum.osx86scene.com/viewtopic.php?f=16&t=2312&sid=77e0703dc5c8af2de3e774074bf5e864 here] and added the deviceID 71C2 in ATIRadeonX1000.kext after intstall
|Both
|All Resolutions
|Yes with patch
|-
|Radeon X800GT 256MB
|Sapphire
|Works with Zephyroth AMD 10.5.2 Rev.1
|Unknown
|1280x1024
|Yes
|-
|Radeon x1650 Pro 256MB
|Sapphire
|No DVI
|Yes
|All
|Working with with Modbin's Driver patch. Install the Apple Graphics Update first  ([http://forum.insanelymac.com/index.php?showtopic=35733&st=80 here] is the installation file).
'''Added''': In my case, somehow installation of Modbin's package did not does the job. However, I extracted the kexts from the installation package matching with my device ID (using Pacifist) and drag those kexts to /System/Library/Extension, authenticate and replace, then I got QE/CI/Rotation and resolutions (though missing 1680x1050).
|-
|Radeon EAX1650 256 DDR3 Gamer Edition
|ASUS
|Fully working
|Both
|All
|Working with with MacLovin's Driver patch ([http://forum.osx86scene.com/viewtopic.php?f=16&t=2312 here] is the installation guid).
Recognized as X1600.
|-
|Radeon X1800XT 512MB
|ATI
|Diabolik's X1800 Natit, enter Dev ID in ATIRadeonX1000.kext
|QE Works, CI Works
|All Resolutions
|Yes with patch
|-
|Radeon X1600XT 256Mb DDR3 (Device ID 0x71c0)
|GeCube (ATI (0x1002))
|[http://forum.insanelymac.com/index.php?showtopic=69345&pid=508765&mode=threaded&start= ATI x1x00 Video Cards on Leopard]
|QE Works, CI Works
|All Resolutions
|Yes with patch
|-
|Radeon X1900XT 512MB 
|Connect3D
|No Patches
|QE Works, CI unknown
|All Resolutions
|Yes
|-
|Radeon X1900XT 512MB 
|Saphire
|Used X1900_XT_EFI_VGA_Installer_0.1.pkg
|Both work
|All Resolutions
|Yes
|-
|Radeon X1900XTX 512MB 
|ATI
|No Patches
|Yes
|All Resolutions
|Yes
|-
|Radeon X1950 Pro 256MB
|Sapphire
|Bronya's 10.5.2(9c16) patch [http://forum.insanelymac.com/index.php?showtopic=58988 here] (Note: c16 works QE/CI and RC, c32 only RC)
|Yes
|Yes
|Needs Bronya's patch.
|-
|Radeon X1950 Pro 512MB
|Powercolor
|Bronya's 10.5.2 patch [http://rapidshare.com/files/91667875/10_5_2_9c31.zip here]
|Yes
|Yes
|Needs Bronya's patch as described.
|-
|Radeon X1950 XTX 512MB 
|Sapphire
|Used [http://www.mediafire.com/?4y28bm1z2ey this] kext to enable full support
|Yes
|All Resolutions
|Fully working with patch
|-
|Mobility Radeon X2300 128MB
|ATI
|Read [http://forum.insanelymac.com/index.php?showtopic=87983&st=0&gopid=635864&#]
|Yes
|1280x800x32 (not always work, depends on laptop model)
|Working with patch (some mouse tearing, some video glitches)
|-
|ATI Radeon HD 2400 PRO 256MB
|ATI
|Used Netkas Newest Natit -->[http://www.mediafire.com/?taajnazpvsm here] from Feb. 26 along with editing ATIRadeonX2000.kext with Dev ID 94c3
|Yes
|All Resolutions
|No... Need Natit Feb 26 plus you MUST use the DVI port w/ a DVI to VGA adapter to get things working with this card!
|-
|ATI Radeon HD 2600XT 256MB
|Sapphire
|Used Natit; DeviceID: 0x9588
|Yes
|All Resolutions
|Yes with Natit
|-
|HD 2600XT 256MB
|PowerColor
|Working out of the box, both heads
|
|
|Yes
|-
|-
|ATI Radeon HD 2600XT
|Sapphire
|New natit.kext from Netkas as of 2/26 [http://www.mediafire.com/?taajnazpvsm here]
|Yes
|All Resolutions
|No, need natit.kext from netkas (new 2/26).  w00h00, sleep now works.
|-
|ATI Radeon HD 2600XT
|Sapphire
|New Natit.kext from Netkas required (feb/26/2008) same as [http://incomplete-news.metaparadigma.de/?p=41 Installation-Hints]
|Yes
|All Resolutions, Dual Head, Pivot
|No OOTB, needs Netkas' NATIT. Here NO sleep with Asus P5LD2 VM / edit: sleep now works for me aswell, was mobo config issue...
|-
|ATI Radeon HD 2600XT 256MB
|Gigabyte
|New Natit.kext from Netkas required (feb/26/2008) same as [http://incomplete-news.metaparadigma.de/?p=41 Installation-Hints] and [http://forum.insanelymac.com/index.php?showtopic=54098 Kext Installation-Hints]
|Yes
|All Resolutions, Dual Head, Pivot
|No, needs Netkas' NATIT (26.02.2008)
|-
|ATI Radeon HD 2600XT 512MB
|Diamond
|Yes 
|Yes
|All Resolutions
|Works out of the box.
|-
|ATI Radeon HD 2600pro
|ONDA
|New ATIRadeonX2000_Leopard.pkg from [http://www.mediafire.com/?vjg1jwiv2ni here] (only one package with netkas's natit 2/26/08 and white menu fix)
|Yes
|All Resolutions
|Fully working with patch.
|-
|ATI Radeon HD 2600pro 512MB
|Visiontek
|Yes With ATIRadeonX2000_Leopard.pkg
|Yes
|All Resolutions
|Works with patch.
|-
|ATI RADEON HD 2600 PRO 512 
|SAPPHIRE
|TRIAKIS AND WHITE MENU
|YES  
|ALL RESOLUTIONS
|YES
|-
|ATI Radeon HD 2600Pro 512Mb
|ASUS
|[http://tinyurl.com/ypdae8 White Menu Fix from] and adding device id to ATIRadeonX2000.kext
|Yes
|All Resolutions
|Yes without Natit patch
|-
|ATI Radeon HD 2600 Pro 512MB
|Gigabyte
|Used ATIRadeonX2000 Leopard.pkg
|Both
|All Resolutions
|No, needs patch
|-
|ATI Radeon X2900XT
|ATI
|Unknown patches used
|Yes
|All Resolutions
|Yes - Not known if patch used
|-
|ATI Radeon HD 3650 1024MB DDR2
|ATI
|Used the driver from [http://forum.insanelymac.com/index.php?s=&showtopic=107526&view=findpost&p=767227 this post]
|Both
|All Resolutions
|No patch, but driver from [http://forum.insanelymac.com/index.php?s=&showtopic=107526&view=findpost&p=767227 this post]
|-
|Radeon HD 3650 512MB DDR2 (EAH3650 SILENT MAGIC)
|Asus 
|Driver from [http://forum.insanelymac.com/index.php?s=&showtopic=107526&view=findpost&p=767227 this post (33)]. Tested with Kalyway52-4, Atkos54, Leo4Allv4.1 (DVI/VGA). A cheap (50€) and energy efficient (10W/65W), silent card - Crysis in low res still playable.
|Both
|All Resolutions
|Works fine
|-
|Radeon HD 3650 512MB DDR2
|Sapphire
|Used the installer from [http://forum.insanelymac.com/index.php?s=&showtopic=107526&view=findpost&p=767227 this post], on iATKOS 2.0i. No need for aditional patching, kexts editing etc. Connected to a VGA monitor, using a dvi2vga adapter.
|Both
|All Resolutions
|Works, with the mentioned installer.
|-
|Radeon HD 3650pro 256MB DDR2
|HIS
|Used the installer from [http://forum.insanelymac.com/index.php?showtopic=107526&st=20# this post], Dont use Kalyway Combo Update 10.5.3, or you'll get white menu bugs.  Install the package, then install Jas Combo Update 10.5.3 No need for aditional patching, kexts editing etc. Connected to a VGA monitor, using a dvi2vga adapter.
|Both
|All Resolutions
|Works, use ATI Radeon HD.pkg for 3650 version.
|-
|ATI Radeon HD 3850
|Gigabyte
|Latest Natit.kext and White_menus_fix
|Yes
|All Resolutions (Monitor Max @ 1680x1050 on both heads)
|Doesn't work without patches.  Also only cards with BIOS version 102 or earlier work. BIOS version 103 is not yet compatible. 
|- 
|ATI Radeon HD 3850
|HiS
|Installer found from irc.osx86.hu channel #radeonhd then White menu fix also from IRC Channel
|Fully working
|Yes Up to 1080p 1920x1080
|No
|-
|ATI Radeon HD 3850 512MB
|Powercolor
|Use EFISTUDIO_EXTENDED from [http://forum.insanelymac.com/index.php?showtopic=141490# here]
|Yes
|All Resolutions
|minimum requirement is 10.5.5 or higher
|-  
|ATI Radeon HD 3870
|Sapphire
|Triakis and latest 38x0 drivers from Leopard-10.5.2-AMD-EFI DVD (netkas's originals work too.)
|Yes
|All Resolutions (Monitor Max @ 1680x1050 on both heads)
|Patches incorporated in Leopard-10.5.2-AMD-EFI DVD or elsewhere obtained netkas/triakis kexts required.
|-
|ATI Radeon HD 3870
|Sapphire
|Used Natit.kext
|Both Work
|All Resolutions
|Fully working with patch
|-
|ATI Radeon HD 3870 ultimate (passiv)
|Sapphire
|All ok with the driver from [http://forum.insanelymac.com/index.php?showtopic=107526&st=0 here]
|Yes
|All Resolutions
|All fine
|-
|ATI Radeon HD 4850
|Visiontek
|TBA
|TBA
|TBA
|TBA
|-
|ATI Radeon HD 4850
512MB
|Sapphire
|Was stuck at 1024x768 Res until I found the fix -->
|Not Sure
|Max 1280x1024 (on my 17")
|Resolution Fix @ this thread [http://insanelymac.com/forum/index.php?showtopic=203638&pid=1367666&mode=threaded&start=0#entry1367666 here]
|
|}. . . . . . .

====nVIDIA====
{| class="wikitable" width="100%"
|-
!Hardware Name
!Board-Manufacturer
!Notes 
!QE / CI
!Resolution
!Fully Working w/o Patch
|-
|GeForce Go 6150
|nVidia shared memory
|Works with iDeneb v1, Leo4All v4.1 and [http://www.mediafire.com/?0dnwxihyqn5 Graphics fix - instructions included]
128MB vram - updated in BIOS
|QE - not supported / CI - software
|Multiple resolutions supported
|No
|-
|GeForce 8600 512MB DVI Fanless Heatsync
|EliteGroup
|Works with Kalyway 10.5.2
Selected nVidia inJect 512 Graphics card on Kalyway install
|unknown
|Multiple resolutions supported including 1920x1200
|No special patch needed after selecting Nvinject 512 on install.
|-
|GeForce 6200
|MSI
|Works with Natit, NVinject and NVidia kexts bundled with Zephyroth 10.5.2
|Not Supported
|Default: 1024x768 Unable to change resolution from System Preferences, changed resolution from boot
|Partially working with patch (Since QE is not supported)
|-
|GeForce 6200TC 64MB (256MB Turbo Cache)
|Unknown
|Used iAtkos 10.5.2. Works with NVinject 0.2.0. Good performance!
|Yes, both
|Default: 1024x768, resolution automaticly changed to 1680x1050 after installing NVinject.
|No, use NVinject
|-
|GeForce 6200TC 512MB
|XFX
|Unknown Patch
|Unknown
|Unknown
|Unknown
|-
|GeForce 6700   128 MB
|MSI
|tested with Kalyway 10.5.2 select NVinject-128
|unknown
|all resolutions
|Yes, use NVinject-128MB
|-
|GeForce 6800GS 256MB 
|PNY
|Used kexts only from Zephyroth Universal Nvidia Installer,then must manually add device IDs to Geforce.kext, NVDARESMAN, and NVDAR40HAL finall NVinject .21 with instructions in forums. google "nvidia card working in leopard" for more help.
|QE/CI both work
|All resolutions work
|Dual monitor with extended desktop but no mirroring.
|-
|GeForce 6800GT 256MB
|Leadtek
|No acceleration :( -- too slow and choppy to be useful.
|No
|1920x1200 working
|No
|-
|GeForce 6800GT 256MB
|Leadtek
|NVinject 0.2.1, manually add device IDs to kexts (Geforce, NVDARE~, NVDAR4~)
|QE/CI both work
|1680 x 1050 working fine 
|Fully working with patch. Dual monitor (extended desktop) works using VGA + DVI-to-VGA adapter
|-
|GeForce 7100GS 256MB 
|XFX
|Used NVInject
|Both
|Only 1680 x 1050 tested, works great.
|Fully working with patch
|-
|GeForce 7200GS 128MB 
|Asus
|Nvinkjet bundled in Kalyway 10.5.1
|Both
|All resolutions work
|Fully working with patch
|-
|GeForce 7200GS 256MB
|ASUS
|NVInject on Kalyway 10.5.2
|Both
|Yes
|Working with patch
|-
|GeForce 7200GS 256MB 
|XFX
|NVInstaller v.4.1
|QE/CI both work
|All resolutions work
|Single display working with patch (10.5.3 works with vanilla NVinstaller v0.52); TV-out does not work at all
|-
|GeForce 7200GS 256MB Passive Cooling
|PNY
|NVInject
|Both work
|All resolutions work
|Fully working with patch
|-
|GeForce 7300 LE (64 MB RAM, 256 MB shared)
|Asus (OEM'd by HP)
|NVInject, added to GeForce.kext, and booted with "Graphics Mode"="1280x1024x32@75"
|No Hardware accelleration
|All resolutions work
|No QE/CI with patch
|-
|GeForce 7300LE 128MB 
|Digital Alliance
|NVinject 0.2.1 used
|Yes
|All resolutions
|With NVInject
|-
|GeForce 7300LE 256MB 
|Leadteck
|NVInject work fine
|Yes
|All resolutions work
|Fully working with patch (EFI strings recommended)
|-
|GeForce 7300GS 256MB 
|Gigabyte
|NVInject/Natit both work fine
|QE/CI both work
|All resolutions work
|Fully working with patch
|-
|GeForce 7300GS 256MB 
|Club3D
|NVInject on Kalyway
|Unknown
|All
|Fully working with patch
|-
|GeForce 7300GS 256MB 
|ASUS
|NVinject
|QE/CI both work
|All resolutions work
|Fully working with patch
|-
|GeForce 7300GS 256MB 
|XFX
|NVinject
|QE/CI both work
|All resolutions work
|Fully working with patch
|-
|GeForce 7300GS 256MB 
|MSI
|NVinject/NVinstaller 5.2
|QE/CI both work
|All resolutions work in both DVI and HDMI ports
|Fully working with patch
|-
|GeForce 7300GS 256MB
|Chaintech
|NVinject 0.2.1
|QE/CI both work
|All resolutions work
|Yes
|-
|GeForce 7300GS 256MB
|Chaintech
|Kalyway Patch
|Both
|All resolutions work
|Yes
|-
|GeForce 7300GT 256MB
|BIG
|NVInject
|QE/CI both work
|All resolutions work
|Yes with NVInject
|-
|GeForce 7300GT 256MB
|GIGABYTE
|NVInject
|QE/CI both work
|All resolutions work
|Yes with NVInject
|-
|GeForce 7300GT 256MB Silent Edition
|NVIDIA
|NVInject 0.2.0
|Both
|All resolutions
|Yes with NVInject
|-
|GeForce 7300GT 256MB
|eVGA
|NVInject
|Both
|All resolutions
|Yes with NVInject
|-
|GeForce 7300GT 256MB
|Zotac
|NVInject
|Both
|All resolutions
|Yes with NVInject
|-
|GeForce EN7300GT 256MB
|ASUS
|Works with NVinject
|Both
|All
|
|-
|GeForce 7300GT 512MB
|Pixelview
|Card needs to be reflashed first
|Both
|All
|yes, with NVinject 512mb
|-
|GeForce 7300 GT 512 Mb (No TurboCache)
|XFX
|Used NVInject 512 Mb 0.2.0 (Kalyway OS X86 version, EFI v8), I had to flash my card by following not so simple steps. Visit NVInject Project Website for more information.
|Both
|Yes
|No, I had to flash my card so that Darwin recognizes it as a 512 Mb video card. 
|-
|GeForce 7500LT 256MB
|ASUS
|NVKush, works with NVKush Istaller. VGA and DVI both work.
|QE/CI work
|1280 x 1024 works great 
|Fully working with NVKush.
|-
|GeForce 7600GS 256MB
|Point of View
|Used Titan
|QE/CI both work
|All resolutions work
|Fully working with Titan
|-
|GeForce 7600GS 256MB
|PowerColor
|NVinject
|QE/CI both work
|All resolutions work
|Fully working
|-
|GeForce 7600GT 256MB
|PNY
|NVinject
|QE/CI both work
|All resolutions work
|Fully working
|-
|GeForce 7600GT 256MB
|BIOSTAR
|
*Works with NVinject or EFI string
*(Model: V7603GT21) The stock fan noise is not detectable all the time.  One may need to move his hand close enough to the fan to see if it is running.
|QE/CI both work
|All resolutions work
|Fully working
|-
|GeForce 7600GT 256MB
|eVGA
|
*Works with NVinject or EFI string
*(Model: 256P2N553DX) The stock fan gets really noisy during booting (post) and then becomes really quiet. It becomes noisy right before Sleep, and keeps running like so after Wake.
|QE/CI both work
|All resolutions work
|Fully working
|-
|GeForce 7600GT 256MB
|Gigabyte
|NVinject or Natit
|QE/CI both work
|All resolutions work
|Fully working
|-
|GeForce 7600GT 256MB
|NVIDIA
|None
|QE/CI both work
|All resolutions work
|Yes
|-
|GeForce 7600GT 256MB
|Winfast
|NVInject 0.20
|Both
|All resolutions work
|Yes
|-
|GeForce 7600GT 256MB
|Eagle
|NVinject or Natit
|QE/CI both work
|All resolutions work
|Yes
|-
|GeForce 7600GT 256MB GDDR3
|Zotac
|NVinject
|QE/CI both work
|All resolutions work
|Yes
|-
|GeForce 7600GT-OC VIVO 256MB
|MSI
|NVinject or Natit
|QE/CI both work
|All resolutions work
|VIVO doesn't work otherwise fully functional
|-
|GeForce 7600GT Silent 256MB
|MSI
|NVinject (ASUS P5B-MX), EFI-string using EFIStudio (Gigabyte GA-G31M-S2L)
|QE/CI both work
|All resolutions work
|Needs patch for resolutions and memory detection
|-
|GeForce 7600GT 256MB
|XFX
|NVinject, Natit or GFX-String
|QE/CI both work
|All resolutions work
|Yes, with NVinject, Natit or GFX-String
|-
|GeForce 7600GT 256MB
|eVGA
|NNInject 0.1.5
|QE/CI both work
|All resolutions work
|Yes with NVInject
|-
|GeForce 7800GT 256MB
|NVIDIA
|Kalyway NVIDIA patch
|Unknown
|Not all
|Need patch from Kalyway
|-
|GeForce 7800GT 256MB
|eVGA
|NVinject 0.2.0 (Kalyway_10.5.2; NVinject-256). Both DVI ports recognized; have not tested dual monitor.
|CI: Hardware Accelerated. QE: Supported
|Dell 1702FP recognized, up to 1280 x 1024 x 75Hz x millions; 
|with NVinject 
|-
|GeForce 7800GT OC 256MB
|BFG
|NVInject v0.41
|Unkown
|All resolutions work
|Yes with patch
|-
|GeForce 7800GTX 256MB
|ASUS
|NVInject v0.33
|Both
|All
|Yes with Patch
|-
|GeForce 7900GS 256MB
|NVIDIA
|Kalyway NVIDIA patch
|Unknown
|Not all
|Need patch from Kalyway
|-
|GeForce 7900GT 256MB
|ASUS
|Kalyway NVIDIA patch
|Unknown
|Not all
|Need patch from Kalyway
|-
|GeForce 7900GT CO 256MB
|eVGA
|NVInject
|QE/CI both work
|All resolutions work
|Need to use NVInject
|-
|GeForce 7900GTO 512MB
|MSI
|NVInject, Needs Bios Flash, Check [http://nvinject.free.fr/roms.php here] for rom.
|QE/CI both work
|All resolutions work, TV Out untested
|Need to use NVInject, BIOS flash
|-
|GeForce 7950 512MB
|eVGA
|NVInject
|Unknown
|All resolutions work
|Need to use NVInject
|-
|GeForce 7950GT 512MB
|NVIDIA
|Needs 4 bytes of bios changed and reflashed. Used [http://nvinject.free.fr/512Mb.html this guide] and [http://nvinject.free.fr/files/nvflash_for_windows.zip windows nvflash].
|QE/CI both work
|All resolutions work (only 60hz working though)
|Used NVinject 2.0 and followed guide [http://forum.insanelymac.com/index.php?showtopic=69855&hl=0295 here] for kext setup.
|-
|GeForce 7950GTOC 512MB
|BFG
|Needs Bios Flash, Check [http://nvinject.free.fr/roms.php here] for rom.
|QE/CI both work
|All resolutions work
|Can use Nvinject or without if you have efi installed by following guide to create gfx string [http://osx86.wikidot.com/how-to-s#toc6 here]
|-
|GeForce 8400GS 256MB
|Gigabyte
|Works with  NVinject 0.2.1,  NVCAP string with 04000000 00000300 04000000 00000007 00000000for DVI.  
|QE / CI ,  yes all
|Resolution , yes all 
|Fully Working with Patch
|-
|GeForce 8400GS 256MB
|MSI
|NVinject 0.2.1 [http://nvinject.free.fr/downloads.php here]. EFI GFX Strings work following [http://osx86.wikidot.com/how-to-s#toc6 this] guide.
|QE/CI both work
|All resolutions work
|No QE/CI without patch
|-
|GeForce 8400GS 256MB
|Sweex
|NVinject 0.2.1
|QE/CI both work
|All resolutions work
|Fully working with patch
|-
|GeForce 8400GS 256MB
|XFX
|NVinject 0.2.0 during Kalyway 10.5.2 install (choose Nvidia 256MB)
DVI output needs NVCAP edit:
* Right Click /System/Library/Extensions/NVInject.kext choose "Show Package Contents"
* Copy Info.plist to ~/Desktop
* Open Info.plist copy with Plist Editor
* Replace NVCAP string with 04000000 00000300 04000000 00000007 00000000 
* Save copy of info.plist and copy back to NVInject.kext contents|QE/CI both work
|All resolutions work
|No QE/CI without patch (NVinject 0.2.0 during Kalyway 10.5.2 install)
|-
|GeForce 8400GS 256MB
|XFX
|NVinject 0.2.1 [http://nvinject.free.fr/downloads.php here]
|QE/CI both work
|All resolutions work
|No QE/CI without patch
|-
|GeForce 8400GS 512MB
|XFX
|NVinject 0.2.0 during Kalyway 10.5.2 install
DVI output needs NVCAP edit. 04000000 00000300 04000000 00000007 00000000 worked.
|QE/CI both work
|All resolutions work
|No.
|-
|-
|GeForce 8400GS 256MB
|Club3D
|NVinject 0.2.0 after Kalyway 10.5.2 install (don't use 0.2.1)
|QE/CI both work
|All resolutions work
|DVI not tested
|-
|-
|GeForce 8400GT 512MB
|eVGA
|Works with NvInject
|Unknown
|All resolutions work
|Yes
|-
|GeForce 8500GT 256MB
|GIGABYTE
|NvInject 0.2.1
|QE/CI both work
|Yes, correct widescreen res for analog only with VGA-DVI converter.
|Yes, with patch
|- 
|NX8500GT MTD256EH
|MSI
|Leo4Allv2, NvInject 0.2.1 (256MB) 
|QE/CI both work
|All resolutions. Dual DVI with HDMI-DVI cable + DVI 
|Yes
|-
|GeForce 8500GT 512MB
|GALAXY
|NvInject 0.2.1 with 512MB patch
|QE/CI both work
|All resolutions work.
|Yes, with patch
|-
|GeForce 8500GT 512MB (SILENT)
|Sparkle
|NvInject 0.2.0 (256MB Recognized)
|QE/CI both work
|All resolutions + DVI-I
|Yes, with patch
|-
|GeForce 8500GT (SILENT)
|Gigabyte GV-NX85T512HP
|Used method as described [http://http://forum.insanelymac.com/index.php?s=&showtopic=109814&view=findpost&p=778873 here]
|QE/CI work flawlessly!
|All Resolutions + DVI
|Yes, using [http://forum.insanelymac.com/index.php?s=&showtopic=109814&view=findpost&p=778873 this] method.
|-
|Nvidia GeForce 8600M GS 512MB
|NVidia
|Display requires driver installation and modification of info.plist to work at full resolution and with VGA-out. Mirror function still doesn't work properly, but forces main display to VGA-out.
* Install Universal NVidia Driver [http://zack.phatoproductions.com/downloads/mac/NVidia-Universal-Installer.mpkg.rar]
* Right Click /System/Library/Extensions/NVInject.kext choose "Show Package Contents"
* Copy Info.plist to ~/Desktop
* Open Info.plist copy with Plist Editor
* Replace NVCAP string with 04000000 00000100 02000000 00000007 00000000 
* Save copy of info.plist and copy back to NVInject.kext contents
* Change permissions of NVInject:
"sudo chown -R root:wheel /System/Library/Extensions/NVinject.kext"
"sudo chmod -R 755 /System/Library/Extensions/NVinject.kext"
* Run Disk Utility and repair permissions on disk.
* Delete Extension Caches and Kernel Caches before rebooting
"sudo rm -R /System/Library/Extensions.mkext /System/Library/Extensions/Caches/"
* Reboot with -f just in case.
|Yes
|Yes with Driver
|No: 1024x768 w/out driver<br /> All Resolutions and VGA-out with Driver
Partial at 1024x768
|-
|GeForce 8600GT 256MB FATAL1TY
|XFX
|NvInject 0.2.1 (256MB)
|QE/CI both work
|All resolutions work
|Yes With Patch
|-
|GeForce 8600GT 256MB Zalman
|XFX
|NVinstaller v.41. It works perfectly on PCIe 16x mobo (but doesn't work on PCIe 4x mobo like asrock 4coredual-sata2 for instance)
|QE/CI both work
|All resolutions work + dual screen
|Yes with NVinstaller v.41 from leo 10.5.2 to 10.5.5, NVinstaller v.51 (vanilla choice) with leo 10.5.6. 
|-
|GeForce 8600GT 256MB
|EVGA
|Used bf2loser's guide from [http://forum.insanelymac.com/index.php?showtopic=82080&st=0#entry724961 here]
|QE/CI/GL both work, sleep (standby) works, Dual Monitor works, no mirroring
|All resolutions work
|Yes With Patch (Punk92) + guide (bf2loser)
|-
|GeForce 8600GT 256MB
|eVGA 256-P2-N751-TR
|NVKush works perfectly OOB. NVinject 0.2.0 works the same way.
|QE/CI/GL all work.  Dual-head works.
|All resolutions work
|Yes, with NVKush or NVInject.
|-
|GeForce 8600GT 256MB
|Elsa Gladiac
|Used 10.5.2 patch
|Unknown
|All resolutions work
|Unknown
|-
|GeForce 8600GT 512MB Palit
|Palit
|NVinject 0.2.1. It works perfectly with two LCD or two VGA monitors, both DVI and VGA ports work perfectly, including when using adapters.
|QE/CI both work
|All resolutions work + dual screen
|Yes with NVinject 0.2.1
|-
|GeForce 8800GS 384MB
|eVGA
|NVInstaller .41
|QE/CI work
|All Resolutions work
|Just edit the DeviceIDs in kexts.
|-
|GeForce 8600GT 1024MB
|Gainward
|NVInstaller v.41
|QE/CI work
|All resolutions work
|Yes, with patch but only 768MB and not 1024MB
|-
|GeForce 8600GT 512MB
|MSI
|Used johnniecarcinogen's [http://forum.insanelymac.com/index.php?showtopic=83931 NVInstall] 0.33 to enable full features
|QE/CI both work
|All resolutions work
|Patch needed
|-
|GeForce 8600GT 512MB
|XFX
|Working OOB, install NVinject V41 AFTER INSTALL to enable all resolutions and other features.
|QE/CI both work
|All resolutions work
|Patch needed
|-
|GeForce 8600GT 256MB XXX
|XFX
|NVinject
|QE/CI both work
|All resolutions work
|Yes
|-
|GeForce 8600GTS 256MB / 512MB
|NVIDIA
|Install in order, and '''clear kextcache''' / repair permissions after each step:
Leopard Graphics Update 1.0 -> NVInstaller v.41 -> Erase and change Device IDs (GeForce.kext, NVDANV##Hal.kext, NVDAResman.ext, NVinject.kext) to "040010de".
|QE/CI both work
|All resolutions work
|Yes
|-
| 8800GT 512MB
| BFG
| NVInject 0.2.1 512MB
| Supported
| All resolutions
| Both DVI output works
|-
|GeForce NX8800GT 512MB
|MSI
|NVInstaller V.34 [http://www.mediafire.com/?mi2obzt2ont here]
|Both
|All
|Just great!
|-
|GeForce 8800GT 256MB
|XFX
|NVinstaller0.33
|QE/CI both work
|All resolutions work
|Yes, with patch
|- 
|GeForce 8800GT 256MB
|ASUS
|NvInstaller 3.1 Used
|QE/CI both work
|All resolutions work
|Yes, with patch
|-
|GeForce 8800GT 512MB (610MB overclocked)
|eVGA
|Works with nvinject 512 form Kalyway 10.5.2 disk.
|both
|all resolution / dual monitor support
|Works, but only 1 res without patch (needs nvinject for full support)
|- 
|GeForce 8800GT 512MB
|Asus
|Apple graphics update 10.5.2+NV 41.
|Both
|All
|Just great!
|-
|GeForce NX8800GT 512M OC
|MSI
|[http://nvinject.free.fr/ NVinject] 
|QE/CI both work
|All resolutions work
|Flawless
|-
|GeForce 8800GT 512MB Turbo
|Gigabyte
|[http://nvinject.free.fr/ NVinject]
|QE/CI both work
|All resolutions
|Yes
|-
|GeForce 8800GT 512MB (G92)
|Gigabyte
|EFI Strings & EFI v8 used. Works after Leopard Graphics Update
|QE/CI both work
|All resolutions work
|-
|eGeForce 8800GT KO 512MB (G92)
|eVGA
|NVInstaller v.33 (NVinject v0.2.1)
|QE/CI both work
|All resolutions work
|Yes, needs NVinject v0.2.1, works post applegfx update
|-
|GeForce 8800GTS 256MB
|NVIDIA
|Works with BrazilMac
|QE/CI both work
|All resolutions work
|Yes
|-
|GeForce 8800GTS 320MB
|MSI
|NVinject [http://forum.insanelymac.com/index.php?showtopic=83931 here]
|QE/CI both work
|All resolutions work
|Needs patch for resolutions and memory detection
|-
|GeForce 8800GTS 320MB
|PNY
|NVinject [http://forum.insanelymac.com/index.php?showtopic=83931 here]
|QE/CI both work
|All resolutions work
|Needs patch for resolutions and memory detection
|-
|GeForce 8800GTS 320MB
|EVGA
|NVinject [http://forum.insanelymac.com/index.php?showtopic=83931 here]
|QE/CI both work
|All resolutions work
|Needs patch for resolutions and memory detection
|- 
|GeForce 8800GTS 320MB XXX Edition
|XFX
|NVinject-320
|QE/CI both work
|All resolutions work
|Yes, I used Kalyway 10.5.2 DVD with NVinject-320
|-
|GeForce 8800GTS 512MB
|XFX
|NVinject installer v.33
|QE/CI both work
|All resolutions work
|No
|-
|GeForce 8800GTS 512MB (G92)
|ASUS
|NVinject.0.2.1 [http://nvinject.free.fr/files/Latest_NVinject.0.2.1.zip here]
|QE/CI both work
|All resolutions work
|Yes, needs NVinject v0.2.1 and VRAM,totalsize has to be set manually in "info.plist" to <00000020> - 512Mb
|- 
|GeForce 8800GTS 512MB (G92)
|eVGA
|NVinstaller v4.1
|QE/CI both work
|All resolutions work
|Had to add 0x0600 (Device ID) to GeForce NVDANV50Hal, NVDAResman, NVinject kexts.
|-
|GeForce 8800GTS 512MB (G92)
|eVGA
|Edited the kext EFI string detailed in this forum post [http://forum.insanelymac.com/index.php?showtopic=89001 here]. (Takes the kext from the 8800GT gfx card in a Mac Pro.)
|QE/CI both work
|All resolutions work
|Do not use NVinject or NVKush. Follow the instructions [http://forum.insanelymac.com/index.php?showtopic=89001 here]. Used on a Boot-132 system.
|-
|GeForce 8800GTS 512MB (G92)
|Point of View
|NVinstaller v0.33
|QE/CI both work
|All resolutions work (using 1920x1200)
|Yes, just used NVInstaller v0.33, download here: [http://scottdangel.com/blog/?page_id=20]
|-
|GeForce 8800GTX 756MB
|ASUS
|NVInject 768MB on Zerpyroths 10.5.2 release
|Both
|All
|Yes w/ NVinject
|-
|GeForce 8800GTX 756MB (G80)
|ASUS
|NVinject 0.2.0
|Both
|All
|Yes w/ NVinject
|-
|Nvidia GeForce 8800GT 512MB (G92)
|XpertVision
|NVInstaller v.33 (NVinject v0.2.1)
|QE/CI both work
|All resolutions work
|Yes
|-
|GeForce 9600GT 512MB (Silent) (G94)
|ECS (Elitegroup)
|Aqua Mac v2 Package and NvDarwin 1.2.3 Must upgrade to 10.5.5!
|Both
|All
|No follow instructions here [http://forum.insanelymac.com/index.php?s=&showtopic=90112&view=findpost&p=948941]
|-
|Asus nVidia GeForce EN9800GT HybridPower 512MB
|Asus
|GFX Strings
|QE/CI Enabled
|All Resolutions
|Use the method stated here with the 8800GT Download Template. [http://aquamac.proboards106.com/index.cgi?board=hack1&action=display&thread=509&page=1]
|-
|Zotac nVidia GeForce 9800GT  512MB
|ZOTAC
|NVInstaller
|QE/CI/QGL Enabled
|All Resolutions
|Use the method NVINSTALLER]
|-
|GeForce 9800GTX 512MB (G92)
|Evga
|GFX Strings
|Both
|All resolutions work (using 1920x1200)
|Installation instruction [http://forum.insanelymac.com/index.php?act=findpost&pid=759844 here]
|-
|GeForce 9800GTX 512MB (G92)
|Leadtek
|GFX Strings & EFI v.8
|Both
|All showing in System Preferences>Display; but only 1680x1050 tested (my LCD native)
|Best results with GFX Strings method described by aquamac [http://aquamac.proboards106.com/index.cgi?board=hack1&action=display&thread=509 here]
|-
|GeForce 9800GX2 512MB (G92)
|MSI
|[Special PCI Paths, two!] GFX Strings & EFI v.8
|Both
|Everything works, Display prefs show all options; 1920×1200 tested (my LCD native), QE&CI Enabeld
|Use GFX Strings with PC_EFI v8 and aquamac's post for ideas on the PCI paths: [http://forum.insanelymac.com/index.php?showtopic=110749&hl=9800GX2] (use google's cache if it stops working)
|-
|nVidia Quadro FX 1400 (128Mb)
|HP
|Kalyway Release 10.5.2 & NVinject 0.2.0 &
|Both
|All resolution work include Dual View Display
|Patch needed in insanelymac forum (change deviceID in GeForoce.kext, NVIDANV40HAL.kext, NVinject.kext)
|-
|nVidia Quadro FX 4500 512MB (G70/G70GL)
|HP
|Kalyway 10.5.2 & NVinject 0.2.0
|QE/CI both work
|All resolutions work with dual display and mirroring
|No patch needed, just shows up as "Graphics by NVIDIA" in system profiler
|-
|} . . . .

===Integrated===

{| class="wikitable" width="100%"
|-
!Hardware Name,(VRAM)
!Board-Manufacturer
!Notes 
!QE / CI
!Resolution
!Full Work / No Patch
|-
|GMA900
|Intel
|Working (No artifacts, so far with Sansey's method, drivers edited by Andy), but needs external monitor/dongle or wire trick (which is the easiest fix, see [http://img391.imageshack.us/my.php?image=photo006ab6.jpg this])
|Both
|1280x800 (Changing resolutions work)
|Download [http://forum.insanelymac.com/index.php?showtopic=110176 these] drivers and install using [http://forum.insanelymac.com/index.php?showtopic=110176&st=20# this] method (more success rates and nearly no artifacts)
|-
|GMA950
|Intel
|Working but some minor issues (mouse tearing)  
|Both
|After applying kext update get only one resolution
|[http://forum.insanelymac.com/index.php?showtopic=86609&st=0&p=614934&#entry614934 AppleIntelIntegratedFrameBuffer.kext v1.4.20  for all resolutions]
|-
|GMA3100
|Intel
|Working but fixed at only one resolution  
|No QE / CI
|1024x768
|No Patch needed
|-
|GMAX3100
|Intel
|Working perfectly  
|Yes
|1280x800
|yes, with Leopard Graphics Update
|-
|GMAX3500
|Intel
|Working but fixed at only one resolution
|No QE / CI
|1024x768
|No Patch needed
|-
|} 

==Network Cards==
===Wireless===
{| class="wikitable" width="100%"
|-
!Interface
!Standard
!Device
!Manufacturer
!Notes
!Fully Working w/o Patch
|-
|USB adapter
|802.11b/g
|WNC-0305USB 
|LevelOne
|It use RTL8187 chipset. Working stable with Kalyway 10.5.2 DVD and driver from [http://www.treiberupdate.de/treiber-download/download-163407-treiber-Realtek-RTL8187LWLANChip.html HERE] or search for 87_Mac10.4_v1309.zip file.
|YES! Install only the driver.
|-
|PCI Card
|802.11b/g
|Gigaset PCI Card 54
|Siemens
|Working as Airport, OOB without patching, on every current Leopard OSX86 install, even on real 10.4.11 PPC G4. Identical to "Sonnet Aria Extreme" with Broadcom chip.
|YES!
|-
|PCI Card
|802.11b/g
|WLI2-PCI-G54S
|Buffalo
|Working as Airport, OOB. Tried on Kalyway 10.5.2.
|Yes
|-
|Mini PCI-E Card
|802.11b/g/n
|4965AGN 
|Intel 
|Unknown Please Confirm
|Unknown 
|-
|PCI
|802.11b/g/n
|AEDA1A
|Broadcom
|Working desktop adapter by BuildSmart
|Yes
|-
|PCIe X1
|802.11a/b/g/n
|AEDA1B
|Broadcom
|Working (270mbps in OS X) desktop adapter by BuildSmart
|Yes
|-
|PCIe X1
|802.11a/b/g/n
|AEDA1C
|Atheros
|Working (300mbps in OS X) desktop adapter by BuildSmart
|Yes
|-
|PCI Card
|802.11bg
|ALL0281
|Allnet
|Atheros Chipset, Working using [http://forum.insanelymac.com/index.php?showtopic=40317&start=0&p=472341&#entry472341 this post] (''kexts from 10.4.8'') Manufacturer ID: 168c Device ID: 0013; connect on startup with a small script
|No
|-
|PCI
|802.11b/g
|WL-138g v2
|ASUS
|OOB with BCM4318 chipset
|Yes
|-
|Mini PCI Express Card
|802.11abg
|AR5BXB6
|Atheros
|Working
|Working with this kext: [http://forum.insanelymac.com/index.php?showtopic=61260]
|-
|PCI Card
|802.11b/g
|F5D7000
|Belkin
|Working with Broadcom 43xx Patch included on Zephyroth DVD.  Regular dropouts, cause unconfirmed.
|With patch
|-
|PCI Card
|802.11b/g
|C54RC/C54Ri (rt2500)
|Conceptronic 
|Working with the Tiger 10.4 driver from ralink (22-11-2006/668KB). lspci -nn: 01:09.0 Network controller 0280: RaLink RT2500 802.11g Cardbus/mini-PCI 1814:0201 (rev 01). This is the older card with the rt2500 chip, only capable of WPA. The newer card has a non osx86 supported rt61 chip (only ppc driver available) and comes with wpa2 support. 
|free/WEP/WPA all fine with the rt driver
|-
|PCI Card
|802.11b/g
|DX-BGDTC
|Dynex
|Working with Broadcom 43xx Patch.  
|With patch
|-
|PCI Card
|802.11b/g
|DWL-G510 (rev. A)
|D-Link
|For Atheros chip, use this guide: [http://forum.insanelymac.com/index.php?showtopic=100551&st=0&p=717143&#entry717143]
|No
|-
|PCI Card
|802.11a/b/g
|DWL-G510 (rev. B)
|D-Link
|Atheros AR5005G (dev id: 168c 001a) - works w/iDeneb v1, Atheros wireless fix selected. [http://www.mediafire.com/?vtvrfzdit1p Atheros.pkg.zip]
|No
|-
|PCI Card
|802.11b/g
|DWL-G520 rev.b
|D-Link
|AR5213 Chipset. working using [http://forum.insanelymac.com/index.php?s=&showtopic=40317&view=findpost&p=780131 this guide].  remember to first type sudo -s in terminal before entering code and repair disk permissions afterwards. WPA not working with manual config, but try [http://forum.insanelymac.com/index.php?s=&showtopic=40317&view=findpost&p=287826 this guide] to get it going (not tested). used Leo4all v3
|No
|-
|PCI Card
|802.11b/g
|HWP-54G
|Hawking
|Used RT2500 "STA_CardbusPCI" Driver & Utility from Ralink Website - the Tiger version (dated 11-23-2006). Does not show up in System Profiler at all, but works if you disable ("Make Service Inactive") the wired ethernet port (en0). Also this was on an unmolested Kalyway 10.5.2 DVD Install.
|No. Requires Driver, Utility, Settings tweaks.
|-
|PCI Card
|802.11b/g/n
|EW7728In
|Edimax
|Works beautifully using the Ralink 10.5 drivers at: [http://www.ralinktech.com.tw/data/drivers/STA_RT2860%20D-1.0.0.0a%20UI-1.4.8.0_2007_11_26.dmg]
Doesn't connect as Airport, and must be configured using the Ralink Utility; configured as ethernet.  Occasional dropouts, but cause unconfirmed.  As a side note, this card works perfectly in Vista x64 as well, n-mode all the way!
|No, see notes
|-
|PCI Card
|802.11b/g/n
|ENLWI-N
|Encore
|Works using Ralink 10.5 drivers [http://www.ralinktech.com.tw/data/drivers/STA_RT2860%20D-1.0.0.0a%20UI-1.4.8.0_2007_11_26.dmg]
|Yes
|-
|PCI Card
|802.11b/g
|WMC300N
|Linksys
|Working OOB 
|Yes
|-
|PCI Card
|802.11b/g/n
|TEW-623PI 1.0R
|Trendnet
|Working OOB 
|Yes
|-
|PCI Card
|802.11b/g/n
|TEW-623PI 2.0R
|Trendnet
|Apparently Trendnet changed their wireless chipset in the 2.0 version of the card to Ralink RT2860.  Card works if you use the drivers [http://www.ralinktech.com.tw/data/drivers/STA_RT2860%20D-1.0.0.0a%20UI-1.4.8.0_2007_11_26.dmg here] Note: if you are going to buy this card off newegg you will get the 2.0 version as of 7/25/08. Also of note the ralink software is a bit clunky compared to apple's airport setup in the system prefs.
|No, see note.
|-
|PCI Card
|802.11n/g/b
|WMP300N
|Linksys
|Works OOB with Kalyway 10.5.1, requires 10.5.1 kexts (IO80211Family, IONetworkingFamily, IOPCIFamily) to work with Kalyway 10.5.2.  Won't run in Vista x64.  Uses an Atheros 5008 chipset.
|No
|-
|PCI Card
|802.11 a/b/g/n
|WMP300N rev.2 
|Linksys
|Working OOB, recognized as an [[Apple Wireless Network Adapter]]. WiFi n Works fine and fast.  Works also With Vista 64Bits.
|Out of the Box
|-
|PCI Card
|802.11g
|WMP54GS v1.0
|Linksys
|Working out of the box both Kalyway 10.5.1 & iAtkos v1.0i; detected as Third Party Wireless Card 
|Yes
|-
|PCI Card
|802.11g
|WMP54GS v1.1
|Linksys
|Working OOB, detected as Airport
|Yes
|-
|PCI Card
|802.11b/g
|WMP54G v4.0
|Linksys
|Working with Ralink rt2500 drivers & utillity
|Yes
|-
|PCI Card
|802.11b/g
|WMP54G v4.1
|Linksys
|Not Working
|No
|-
|PCI Card
|802.11g
|WG311T
|Netgear
|Working after adding device ID "pci168c,13" in original AirPortAtheros.kext
|No
|-
|PCI Card
|802.11g
|WG311v3
|Netgear
|Not working. Card has a marvell 8335 chipset.
|No
|-
|PCI Card
|802.11bg
|WG311T
|Atheros
|Working using [http://forum.insanelymac.com/index.php?showtopic=40317&start=0&p=472341&#entry472341 this post] (''kexts from 10.4.8'') Manufacturer ID: 168c Device ID: 0013
|Working on Kalyway's 10.5.1 with 10.5.2 update
|-
|USB Adapter
|802.11g
|WG111v3 (Realtek's RTL8187 Chipset)
|NETGEAR
|Detected as an Ethernet Controller with RTL8187B Drivers from [http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=1&PFid=1&Level=6&Conn=5&DownTypeID=3&GetDown=false&Downloads=true],  and working perfectly!
|Working with driver
|-
|USB Adapter
|802.11g
|WG111v2 (Realtek's RTL8187 Chipset)
|NETGEAR
|Detected as an Ethernet Controller with RTL8187L Drivers from [ftp://66.104.77.130/cn/wlan/87_Mac10.4_v1309.zip HERE], and working perfectly!
|Working with driver
|-
|USB Adapter
|802.11g
|Wireless G USB (v4001 Zydas Chipset)
|BELKIN
|Working perfectly with drivers from [http://mac.softpedia.com/get/Drivers/Zydas-WLAN-USB-driver.shtml] on Leo4Allv2
|Yes working with drivers
|-
|USB Adapter
|802.11bgn
|F5D8053
|BELKIN
|Working perfectly with drivers you can get from Totallybonkers here : [http://www.mac-forums.com/forums/showthread.php?p=685772#post685772]. Only tested with a 802.11g network with WEP.
|Yes working with drivers
|-
|USB Adapter
|802.11b/g
|WL-167g
|ASUS
|First install Realtek Drivers from [http://www.ralinktech.com/ralink/Home/Support/Macintosh.html] (USB RT2870) Restart with -f and -v look for a ralink driver being loaded. Then go to Network in System Preferences, hopefully it will appear. Start USBWirelessUtility and check for the device status. If it doesn't work, check that the RT73USBWireless.kext is really loaded. In terminal kextstat, and look for com.Ralink.driver.RT73 (1.1.7). If it isn't there try sudo kextload RT73USBWireless.kext in terminal.  You might also have to add your ip settings manually in Network Preferences by clicking the plus sign above the lock and adding an ethernet device.
| It works ok now but i get some CRC errors and dropped frames, according to USBWirelessUtility. But i did download 4 gb torrents just fine...
|-
|PCI Card
|802.11g
|F5D7000
|Belkin
|Working with Zephyroth 10.5.2, select Broadcom 43xx series drivers when customising the install
|Patches are on Zephyroth Install DVD
|-
|PCI Card
|802.11a/b/g
|AWLH4030
|Airlink
|Working with 10.5.2 using AirportAtheros5424.kext. Had to remove all device/manufacturer id's except the one for the specific card. [168c:0013]
|No
|-
|PCI Card
|802.11n
|AWLH6080
|Airlink
|Working with 10.5.2 using Ralink driver. Connection utility kept hanging Shutdown until I cleared system caches. Cheap $45 Draft N card.
|Yes
|-
|PCI Card
|802.11b/g
|DWA-520
|D-Link
|Worked with iAtkos 2.0i 10.5.2.  Recognized as Airport extreme.  Select "Atheros for wireless" at install. After each reboot you must reconnect manually
|Yes
|-
|PCI Card
|802.11b/g/n
|DWA-542
|D-Link
|Worked with Kalyway 10.5.2-10.5.5.  Recognized as Airport extreme.  Works out of the box.  Recognized on OEM Leopard Disk with Generic Boot 132 Loader.  Works Perfect
|Yes
|-
|PCI-Express Card
|802.11n
|DWA-556
|D-Link
|Working with Kalyway 10.5.1 and 10.5.2 out of box, detected as Airport Extreme. Note: sometimes drops connections, could be due to other OSX issues. Sleep function now also works out of the box, without the modified kernel - I have previously used the WG311T, and it didn't work.
|Yes. Keep in mind, you must not use the modified IO80211Family.kext.
|-
|USB Adapter
|802.11 b/g
|DWL-G122 Version C1
|D-Link
|Working. Known issue: after each reeboot of OSX you need to re-insert the USB adapter in order to be correctly detected by the OS.
|Working on Kalyway's 10.5.1 with drivers supplied in Dlink's CD.
|-
|USB Adapter
|802.11 b/g
|WUSB54GC
|Linksys
|Working on Kalyway's 10.5.2 DVD installation using the following steps: a. Install Prasys drivers on Kalyway 10.5.1 with WUSB54GC working. b. Use Kext Helper b7 to install 10.5.1 IO80211Familykext and 3 RT* kext. c. Install Prasys 1.2 utility.
|Yes, with replug
|-
|USB Adapter
|802.11 b/g
|TEW-424UB V3.0R & V3.1R
|TrendNet
|Working with Kalyway 10.5.2 DVD and driver from [http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=1&PFid=1&Level=6&Conn=5&DownTypeID=3&GetDown=false&Downloads=true#RTL8187B Realtek]. Device Versions V3.0R and V3.1R use RTL8187B chipset, Versions V2 and V2.1R use SIS163. The original version A used the Zydas chipset.
|Yes, but with extra driver
|-
|USB Adapter
|802.11g
|US54SE II (Realtek's RTL8187 Chipset)
|MSI
|Detected as an Ethernet Controller with RTL8187L Drivers from [http://www.treiberupdate.de/treiber-download/download-163407-treiber-Realtek-RTL8187LWLANChip.html HERE], and working perfectly!
|Working with driver
|-
|USB Adapter
|802.11g
|WL-169 v1 001
|Sitecom
|RTL-8187B driver can be downloaded from [http://www.realtek.com.tw/downloads/]
|Working with driver
|-
|USB Adapter
|802.11b/g
|LW053
|Sweex
|Ralink RT2571WF driver can be downloaded from [http://www.ralinktech.com/ralink/Home/Support/Macintosh.html]
|Working with driver, however creates problems with the detection of USB devices in general
|-
|USB Adapter
|802.11g
|Wi-Fire
|hField Technologies
|Uses their own wi-fi management utility. They have updated drivers at their website. This adapter is available retail at Microcenter and online at Amazon, Newegg, etc. As of June 08, runs ~$70. Works fine with manufacturer supplied drivers, good network pickup on directional receiver.
|Working with manufacture supplied OSX 10.4/10.5 driver!
|-
|PCI Card
|802.11b/g
|USR5417
|U.S. Robotics
|Works Out of Box, detected as Airport.
|Yes
|-
|PCI-Card
|802.11b/g
|TP-Link WN650G
|TP-Link
|Atheros 5212 chipset. Detected as AirPort after installing drivers from OSX86Tools
|-
|PCI Card
|802.11b/g
|WPC1810G
|MOTOROLA
|Working OOB, Detected as Airport, You have to go into network settings and add it to the list.  After adding works like a charm 
|Yes
|} . . .

===Wired (Ethernet) ===

{| class="wikitable" width="100%"
|-
!Interface
!Standard
!Device
!Manufacturer
!Notes
!Fully Working w/o Patch
|-
|PCIe
|10/100/1000BASE-T Ethernet
|BCM5751 14e4:1677
|Broadcom
|iDenbe 10.5.5 - Edited kext AppleBCM5751Ethernet.kext: moved <string>pci14e4,1677</string> to bottom of array, MUST manually enter MAC address of your card in terminal; before each use: sudo ifconfig en0 ether 11:11:11:11:11:11
|NO
|-
|PCI
|10/100baseT
|3c905x
|3Com
|tested several PCI 3c90x compatible 10/100 cards, some works fine (id:9055/Cyclone), some don't (id:9050/Boomerang)
|-
|USB
|10/100
|USB Lan adapter
|Nintendo
|*chipset AX88772
|working out of the box
|-
|USB2.0
|10/100/1000baseT
|101
|AirLink
|Product ID: 0x1780, Vendor ID: 0x0b9, Sys. Prof. shows "USB2.0 Gigabit Adapter"
|working out of the box
|-
|USB2.0
|10/100/1000baseT
|MB442Z/A
|Apple
|Works OOB with Kalyway 10.5.2
|Working OOB with Kalyway 10.5.2
|-
|
|
|RTL8110SC
|Realtek
|Onboard card on MSI P965 Neo2(-FI)
|working out of the box
|-
|
|
|8111B
|Realtek
|Onboard LAN (e.g. GA-EP35-DS4)
|Working w/o patch (AFP requires RealtekR1000.kext)
|-
|
|
|8169S
|Realtek
|PCI-based gigabit network card, card is Trendnet brand I think.
|Working out of the box.
|-
|
|
|PRO/100 VE
|Intel
|works with ASUSP4800vm.pkg also need IONetworking family.kext [http://www.insanelymac.com/forum/index.php?showtopic=25477&st=36 Download files]
|working 100% but require patch
|-
|
|
|8100C
|Realtek Semiconductor Corp.
|Fully Working Recognized as Realtek 8139 Ethernet
|working 100% without patch
|-
|
|
|8139
|Realtek Semiconductor Corp.
|Works
|Works OOB
|-
|
|
| Linksys 100TX
| Cisco
| Fully working with Darwin Tulip kext
| [http://forum.insanelymac.com/index.php?showtopic=6115&start=0&p=38422&#entry38422]
|-
|
|
| DGE530T
| D-Link
| Works with skge-e.kext (Driver provided by D-Link doesn't work)
| Works with patch
|-
|
|
|Yukon 8056 PCIe (onboard nForce 430 chipset)
|Marvell
|Works with IONetworkingFamily.kext edit [http://www.insanelymac.com/lofiversion/index.php/t34446.html]Thread to fix
|No, but easy fix :P
|-
|
|
|Yukon 8042 PCIe
|Marvell
|just follow this : [http://www.insanelymac.com/forum/index.php?showuser=386918]
|works fine then modified
|-
| PCI
| 10/100/1000 baseT
| Netgear Gigabit (GA311)
| Netgear
| Model:  GA311 Chipset: Realtek RTL8169S
| Works out of the box. Bonjour works properly!
|-
|
|
| Planet ENW-9700 Mini PCI-E Gigabit Ethernet Adapter
| Planet
| Chipset: Marvell Yukon2 (88E8053)
| Works out of the box without patching
|- 
|
|
| Attansic L2 Fast Ethernet Adapter
| Asus
| Chipset: Attansic L2
| Works with: AttansicL2Ethernet.kext [http://www.4shared.com/file/93302364/b1e420/AttansicL2Ethernet090219kext.html]
|-
|
|
| Atheros/Attansic L1 PCI-E Gigabit Ethernet Adapter
| Asus
| Chipset: Attansic L1
| Works with [http://forum.insanelymac.com/index.php?showtopic=40851&st=300&gopid=707720&# DaemonES/MadInt driver] but no function at wake up from sleep
|-
|
|
| D-Link DFE-520TX
| D-Link
| Works with driver Viarhine.pkg included in iAtkos v. 2.0i DVD
| Works with patch
|-
|
|
| D-Link DFE-530TX
| D-Link
| Chipset: Not Sure
| Doesn't Work
  ks out of the box w/o patch
|-
| PCI
|
| Netgear Gigabit (FA311)
| Netgear
| Model:  FA311 Chipset: Realtek RTL8139D
| Working 100% out of the box w/o patch
|-
|PCI
|
|FNC-0109TX
|Level One
|Realtek RTL8139
|working out of the box
|-
| PCIe
|
| Realtek pcie gbe family 8168
|
| Works with realtek1000 kext
|
|-
|}

 . . . . . . . . .

== Sound Cards ==

{| class="wikitable" width="100%"
|-
!Hardware Name (alphabetical)
!Manufacturer
!Notes
!Fully Working w/o Patch
|-
|0202
|E-MU
|It requires USB 2.0. After installation of supplied drivers it works fully. Both input and output work, eventhough the E-MU 0202 control panel doen't launch on AMD machine (it doesn't affect functionality of audio interface)
|Yes
|-
|ALC888 (onboard)
|Realtek
|Require [http://forum.insanelymac.com/index.php?s=&showtopic=32859 AppleHDA Patcher] v1.2 and a Linux [http://psykopat.free.fr/apple/AppleHDA/sigmatel/ dump]
or ALC888audio.mpkg (6 channel and inputs)
|No, Need patch
|-
|ALC888 (onboard) Acer 
|Realtek
|Works on Acer Aspire 5920G (Kalyway 10.5.2 install DVD)
|Yes
|-
|ALC888 (onboard) Dell 530
|Realtek
|Require [http://forum.insanelymac.com/index.php?s=&showtopic=32859 AppleHDA Patcher] v1.20 and a Linux [http://forum.insanelymac.com/index.php?showtopic=104644 dump]
|No, Need patch
|-
|ALC888 (onboard) Dell 530
|Intel Corporation HD Audio Controller [8086:293e] (rev 02)
|
*'''Solution 1''': Delete ALCinject.kext, install HDAEnabler.kext & AppleHDA.kext from here [http://www.mediafire.com/?hjaddnmzq1w Dell_530_audio.zip] (front panel headphone/mic work as well as all audio in/out)
*'''Solution 2''': [http://www.mediafire.com/?7id1c5uhfue HDA_ICH9_ALC888.zip] (front panel headphone/mic not working)
|No, Need patch
|-
|ALC888 (onboard - ICH7 Shuttle SG31G2)
|Realtek
|Used this [http://forum.insanelymac.com/index.php?act=attach&type=post&id=6739 installer] and it worked quite well.  Have not tested optical out or audio in. Stereo works with this patch
|You gotta patch it.
|-
|ALC888 (nForce 430 chipset onboard)
|Realtek
|ALCinject and ALC888 w/ 3port used on Zephyroth's 10.5.2 DVD
|No, but using Zephyroth install audio works on first boot, but not set to digital default :( no leopard boot music
|-
|ALC889A
|Realtek
|onboard Sound. requires patch found at [http://rapidshare.com/files/51585161/alc889a.zip.html Rapid Share]
* [Updated by Muhammad Anil Babur Kiani]
|Note. Once patched, in/out works. Detail Description at [http://www.insanelymac.com/forum/lofiversion/index.php/t52254.html Insanelymac]
|-
|Creative Sound Blaster Live
|Creative Labs
|Works with kxAudio Beta driver 1.1b1 under Kalyway 10.5.2. Requires [http://download.kxproject.lugosoft.com/downloads/kXAudioDriver-1.1b0.dmg Insanelymac]
|Yes output works with patch. Input options are grayed out.  [Tested By Muhammad Anil Babur Kiani]

|-
|Audigy 2 ZS Platinum
|Creative Labs
|Works with kxAudio Beta driver 1.1b1 under Kalyway 10.5.3 and 10.5.4. Requires [http://download.kxproject.lugosoft.com/downloads/kXAudioDriver-1.1b1.dmg]
|Yes output works with patch. Input options are grayed out. 
|-
|Revolution 7.1
|M-Audio
|Works
|No, but everything works with driver found [http://www.audio-evolution.com/drivers/ here].
|-
|Audiophile 2496
|M-Audio
|Doesn't Work - no intel PCI M-Audio drivers (likely due to no real Intel Macs with PCI)
|No
|-
|Audiophile USB
|M-Audio
|Drivers from [http://www.m-audio.com M-Audio]
|Yes
|-
|Firewire 410
|M-Audio
|Drivers from [http://www.m-audio.com M-Audio]
|Yes
|-
|AureonDUAL USB
|Terratec
|USB Stick Soundcard. In and output both work perfectly (OOB). No driver needed. 
|Yes
|-  
|COMPAQ Premier Sound PCI
|Creative (CT5805)
|Works out of the box. I took this old card from a bunch of 5 or 6 old sound cards. I tried them all and none worked. I was about to give up, but I decided to give this one a try... And it Worked!!! If you have an old Compaq Computer with a sound card, see if it has one of these sound cards.
|Yes
|-
|-
|DELTA 1010
|M-Audio
|Requires ENVY24 kext [http://audio-evolution.com/drivers found here]
|Needs patch and then still doesn't have soundcard menu access for levels etc - but audio works.
|-
|SigmaTel 9220 (onboard)
|SigmaTel
|
*Require sigmatel 9220.pkg, working audio from line out pin
*Need to repair disc permission after pkg install
|No, need patch
|-
|HDSP9532
|RME
|Works out of the box
|Yes
|-
|SigmaTel 9220 (onboard)
|SigmaTel
|
*Require sigmatel 9220.pkg, working audio from line out pin
*Need to repair disc permission after pkg install
|No, need patch
|-
|SigmaTel 9250 (onboard)
|SigmaTel
|Require [http://forum.insanelymac.com/index.php?s=&showtopic=32859 AppleHDA Patcher] v1.2 and a Linux [http://psykopat.free.fr/apple/AppleHDA/sigmatel/ dump]
|No, need patch
|-
|SL-8850
|SpeedLink
|works OOB
|yes
|-
|UA-1EX
|Edirol
|Drivers from Edirol [http://www.rolandus.com/products/productdetails.aspx?dsection=d_downloads&ObjectId=743]
|Does not work with current drivers.
|-
|AudioFire 2
|Echo Audio
|Works out of the box. Tested with iTunes, Logic 8 pro, Garage Band, Ableton Live and more.
|Yes, with OSX driver from [http://echoaudio.com/Downloads/MacOSX_Software.php Echo Audio] 
|-
|MOTU Ultralite
|MOTU
|External FireWire Audio Interface. Tested with Logic 8 Pro, iTunes, Quicktime, etc -- all working flawlessly. 
|Works w/ standard Leopard driver from [http://www.motu.com/download MOTU])
|-
|MOTU 828MKII firewire 
|MOTU
|External FireWire Audio Interface. Tested with Logic 8 Pro, iTunes, Quicktime, etc -- all working flawlessly. 
|Works w/ standard Leopard driver from [http://www.motu.com/download MOTU])
|-
|RME Fireface 800
|RME
|External FireWire Audio Interface. Works perfectly in 400 and 800 (w/ 800 card) in Logic 8, iTunes.
|Works OOB with OSX drivers from RME [http://www.rme-audio.de/en_downloads.php?page=content/downloads/en_downloads_driver&subpage=content/downloads/en_downloads_driver_fireface])
|-
|RME HDSP 9632
|RME
|Internal PCI Audio Interface. Works perfectly in Logic 8, iTunes.
|Works OOB with OSX drivers from RME 
|-
|RME HDSP PCI rev. 1.8 + Multiface II
|RME
|Internal PCI HDSP rev. 1.8 + external Multiface II + external power supply. Works perfectly in Logic 8, iTunes.
|Works OOB with OSX drivers from RME 
|-
|RME HDSP PCI rev. 1.8 + Hammerfall DSP Digiface
|RME
|Internal PCI HDSP rev. 1.8 + external Hammerfall DSP digiface + external power supply. Works perfectly in Logic 8, iTunes.
|Works OOB with OSX drivers from RME. It's a real pleasure, try it!!!
|-
|Apogee Duet
|Apogee
|External FireWire Audio Interface. Works perfectly with Firewire 400
|Works OOB with OSX drivers from Apogee[http://www.apogeedigital.com/downloads/documents.php?show=duet])
|-
|PSC605
|Phillips
|PCI sound card. must use CMI8738 driver with kext helper in order to only get two channels (only my front two speakers work, not the rear ones). neither did the center channel in surround sound.
|google CMI8738 kext.
|-
|USB Gamers Headset
|Logitech
|USB Gamers headset with microphone. Works fine with 10.4.8, 10.4.11 and 10.5.2. When using with Leopard, the device needs to be plugged in during boot or you have to manually change the sound output to the device in the sound configuration utility. Sound is great, has a volume control on the cord that works correctly including the Apple sound graphic on the screen. CPU is not under load while playing sound and the microphone works great.
|Available retail everywhere (Circuit City, Best Buy, etc) and retails around $30. Cheap sound solution for laptop users whose sound chip is not supported by OSX.
|-
|USB Stereo Headset with Microphone
|Cyber Acoutics
|USB Stereo Headset with Microphone. Works fine with Kalyway 10.5.2. 
|Yes
|-
|Tascam US-122
|Tascam
|Works OOB with OSX drivers from [http://www.tascam.com/products/us-122;9,15,68,19.html Tascam]
|Yes
|-
|Toshiba Multimedia Centre (USB)
|Toshiba
|Works OOB gives 5.1 + SPDIF and you also get LAN and 4 USB Sockets that work OOB as well no drivers needed
|Yes
|-
|} .

== Other Accessories ==

{| class="wikitable" width="100%"
|-
!Hardware Type
!Hardware Name
!Manufacturer
!Notes
!Fully Working w/o Patch
|-
|Wireless Presenter with Laser Pointer
|Model # 33374
|Kingston
|
*Works out of the box
*USB interface
|Yes
|-
|Remote Control for Front Row
|Keyspan RF Remote for Front Row
|Keyspan
|
*Works out of the box
*USB interface
|Yes
|-|
|-
|IR Reciever for Mac (Front Row, VLC, iTunes, etc)
|Manta TR1 USB IR Receiver
|Mira [http://twistedmelon.com/mira/hardware.html]
|
*Unfortunately this only worked for me on GA-EP45-DS3L when I bought their software. You should buy it anyway if you have a Mac or OSX86 machine because it's really cool.
*USB interface
|Seems like you have to buy the software to make this work on OSX86.
|-|
|Mobile Audio Interface
|Transit
|M-Audio
|Works with drivers from manufacturer site
|No, needs official drivers
|-
|Bluetooth Dongle
|BT-USB
|Kinamax
|Works OOB (Note Class 1 328 ft range)
|Yes
|-
|Bluetooth Dongle
|VP6494
|Interlink
|Works OOB
|Yes
|-
|Bluetooth Dongle
|BTD603-132
|AZiO
|Works OOB
|Yes
|-
|Bluetooth Dongle
|Logitech BT Mini-Receiver from MX5000 desktop set (keyboard & mouse)
|Logitech
|Works using the kext from this thread [http://forum.insanelymac.com/index.php?showtopic=94113&st=0&p=742268&#entry742268]
|No
|-
|Bluetooth Dongle
|ENUBT-C2E
|Encore
|Works OOB
|Yes
|-
|Bluetooth Dongle
|BCU32
|Mobidick
|Works OOB
|Yes
|-
|USB Bluetooth Dongle
|ABT201
|Airnet
|Works OOB
|Yes
|-
|USB Bluetooth Dongle
|USB-200
|Anycom
|Works OOB
|Yes
|-
|USB Bluetooth Dongle
|BCM XXX
|Broadcom
|Works OOB
|Yes
|-
|USB Bluetooth Dongle
|PC2PC
|MSI
|Works OOB
|Yes
|-
|USB Bluetooth Dongle
|ACB10US
|Targus
|Works OOB
|Yes
|-
|USB Bluetooth Dongle
|33902
|Kensington
|Works OOB
|Yes
|-
|USB Bluetooth Dongle
|F8T016NE
|Belkin
|Works OOB
|Yes
|-
|USB Bluetooth Dongle
|F8T012
|Belkin
|Works OOB
|Yes
|- Dave
|USB Bluetooth Dongle
|KW-002
|Kingfox
|Works OOB.
|Yes
|-
|USB Bluetooth Dongle
|8E4178 Palladio USB BT 100
|digicom
|Works OOB.
|Yes
|-
|USB Bluetooth Dongle
|WBT100
|Auvi
|Works OOB
|Yes
|-
|USB IrDa Dongle
|F5U235ea
|Belkin
|Don't Work
|No
|-
|Creative Fatal1ty USB Headset
|HS-1000
|Creative
|Works OOB
|Yes
|-
|DVD-RW/CD Drive
|Super-WriteMaster BG69-00734A
|Samsung
|Generic Drive Support. LightScribe working w/ appropriate [http://www.lacie.com/products/product.htm?pid=10096 software] 
|Yes
|-
|DVD-+RW/CDRW Drive
|Super All Write LH-20A1L
|Lite-On
|Generic Drive Support. LightScribe working 
|Yes
|-
|DVD-+RW/CDRW Drive
|Super-WriteMaster SH-S203B
|Samsung (TSSTcorp)
|Generic Drive Support. 
|Yes
|-
|DVD-+RW/CDRW Drive
|Super WriteMaster SH-S203D
|Samsung (TSSTcorp)
|Generic Drive Support. 
|Yes
|-
|DVI to Video Adapter 
|Apple DVI to Video Adapter
|Apple
|Only Works in G5 and ATI Cards
|Not working with Nvidia Cards
|-
|USB Flash Memory
|CUFD-H 4G
|CFD
|Not working, Disappear in between copying 
|No
|-
|Fingerprint Reader
|Unknown
|Microsoft
|Doesn't Work
|Doesn't Work
|-
|Keyboard
|Evolution Stream
|Cherry
|Multimedia Keys work OOB
|Yes
|-
|Mouse
|G7 Wireless Gaming Mouse
|Logitech
|Click, 4 way scroll and DPI adjustments work fine. Back button does not
|Mostly
|-
|Keyboard
|Aluminum flat USB Keyboard
|Apple
|All keys work inlcuding the Apple specific function keys. Does not work when installing Mac OS, need a PS2 keyboard 
|Yes
|-
|Keyboard
|Mac Pro Keyboard (clear)
|Apple
|Everything works OOB during and after install - some usb devices may not work in attached usb ports...systems sometimes complains that there is not enough power to run the devices.
|Yes
|-
|Keyboard
|G15 Gaming Keyboard
|Logitech
|Main keyboard, numpad, USB ports, backlight, media buttons and volume control work OOTB. LCD works with [http://www.entropy.ch/software/macosx/lcdtool/ this]. G keys do not work.
|Mostly
|-
|Keyboard
|UltraX Premium Keyboard USB 
|Logitech
|Fully works after Logitech Control Center installed
|No, Cmd & Alt keys switched
|-
|Keyboard/ Gaming Keyboard
|Eclipse II
|Saitek
|Mostly works, media buttons are screwed up:
*Stop button does mute/unmute
*Play/Pause button is volume down
*Forward button works
*Back button does back, or Play/Pause if you hold it for a second.
*Volume up, down, and mute keys do nothing.
*Number pad enter key does not work.
*Color change works.
|No, but the important parts do.
|-
|Gaming keyboard
|Lycosa
|Razer
|Works out of the box
|Yes
|-
|Graphics tablet
|Bamboo One
|Wacom
|Works OOB
|Yes
|-
|Graphics tablet
|CTE-440 Graphire 4
|Wacom
|Works OOB - Download latest Graphire 4 software for Mac from Wacom website for best integration with applications.
|Yes
|-
|Keyboard & Mouse
|Unknown
|Genius
|Multimedia Keys work OOB
|Yes
|-
|3G Modem
|E220
|Huawei
|Works OOB 
|Yes
|-
|3G Modem
|E272
|Huawei
|Works OOB
|YES
|-
|3G Modem
|E172
|Huawei
|Doesn't work 
|Doesn't work
|-
|Mouse
|Logitech
|MX Revolution USB Cordless Laser Mouse
|Works with Logitech Control Center
|Yes with Logitech Control Center
|-
|Mouse
|Logitech
|MX Revolution
|Works out of the box
|Yes - Logitech Mac OSX driver install for all button and wheel functionality.
|-
|Mouse
|DeathAdder Gaming Mouse
|Razer
|Works OOB
|Yes
|-
|Mouse
|Diamondback
|Razer
|Works OOB and you can use ProType drivers
|Yes
|-
|Mouse
|Copperhead
|Razer
|Works out of the box
|Yes
|-
|PCI-E Card (1x)
|SATA RAID Card 2 Ports
|Rosewill RC-211 (Silicon Image Chipset)
|Set the jumper to deactivate the raid bios (unless you need it). <br />Needs OS X driver: [http://www.siliconimage.com/support/supportsearchresults.aspx?pid=32&cid=3&ctid=2&osid=3& driver] 
|Yes
|-
|PCI Express Card
|SATA RAID Card 1 Port
|Silicon Image 3531 
|Needs OS X driver: [http://www.siliconimage.com/support/supportsearchresults.aspx?pid=32&cid=3&ctid=2&osid=3& driver] patch Plist.Info with 0x35311095 PCIID
|Yes
|-
|PCI Card
|PATA RAID Card 2 Ports 
|Silicon Image Chipset 0680(A)
|No Driver by Vendor / Manufacturer, Not tested any (maybe) existing driver from 3rd person
|No
|-
|Scanner
|CanonScan LiDE 25
|Canon
|Works with the driver from manufacturer's site/CD
|Yes
|-
|Scanner
|hp 4670
|HP
|Does not work with Leopard 10.5.4.  It reportedly works with earlier versions of Leo and Tiger.
|No
|-
|Tablet
|G-Pen 4500
|Genius
|Works with the driver from manufacturer's site/CD (Uses Rosetta since there is no Intel version of the driver)
|Yes
|-
|USB Phone
|EX-03
|Phone Skype
|[http://www.echostore.com/skype-phone-lcd-usb.html URL]
|Yes
|-
|USB Phone
|VoIPtel 40
|Hagenuk
|sound in + out working OOB, keys doesn't work
|No
|-
|USB Sound Card
|KY - 360
|3D sound (very cheap)
|sound in + out 2.1 
|yes
|-
|TV Tuner
|PCTV 110i
|Pinnacle Systems
|Doesn't Work
|Doesn't Work
|- 
|TV Tuner
|PCTV Hybrid Pro Stick
|Pinnacle Systems
|Works with EyeTV w/o Patch
|Yes
|-
|TV Tuner
|WinTV HVR 950 (black)
|Hauppauge
|Works with EyeTV 3.0.3 ONLY
|Yes
|-
|UPS
|No-Break Back-UPS RS1500
|APC
|Works OOB
|Works OOB
|-
|Webcam
|from BenQ 24" Display
|BenQ
|Fully working 
|Yes
|-
|Webcam
|Playstation EYE HD
|Sony
|Fully working OOB
|Macam / iUSBcam
|-
|Webcam
|LifeCam VX1000
|Microsoft
|Video working with macam or iUSBcam but picture quality is not good and some settings are missing. iChat recognizes the webcam but Photo booth doesn't. Hopefully next version of macam will be better.
|Built-in mic not working
|-
|Webcam
|LifeCam VX3000
|Microsoft
|Video working, unacceptable picture quality
|Built-in mic not working
|-
|Webcam
|QuickCam Pro 9000
|Logitech
|Video and mic work very well in Photo Booth, iChat, quicktime and garage band. Mic works iMovie, but video doesnt (you can still recored in quicktime or photo-booth and import.)
|Video not working in iMovie
|-
|Webcam
|Quickcam Messenger
|Logitech
|Video and microphone works with [http://webcam-osx.sourceforge.net/ maccam]. But not with ichat!!! Max. 4 frames per second (Windows/Linux/Leopard).  
|No
|-
|Webcam
|Philips SPC500NC
|Philips
|Partially works with [http://webcam-osx.sourceforge.net/ maccam]
|No
|-
|Webcam
|PWC-30IS
|Princeton
|ichat not working
|Not UVC, Patch needed.
|-
|Webcam
|QuickCam Ultra Vision (UVC)
|Logitech
|Fully working OOB
|Yes
|-
|Webcam
|Quickam S 5500
|Logitech
|Fully working OOB 
|Yes
|-
|Webcam
|Quickcam Communicate Deluxe
|Logitech
|Fully working OOB
|Yes
|-
|Webcam
|BSW20K04 (UVC)
|BUFFALO
|Fully working OOB But worst image ever
|Yes
|-
|Webcam
|BSW13K02H (UVC)
|BUFFALO
|Fully working OOB bad image
|Yes
|-
|Webcam
|RF-NBCAM
|Rocketfish
|Works with Drivers provided, does not work in iChat (says so right in manual)
|No
|-
|Webcam
|VGA Single Chip - USB (0x2600)
|Pixart Imaging Inc. (0x093a)
|Doesnt Work OOTB
|No
|-
|Audio Interface
|FCA202
|Behringer
|Fully working OOB
|Yes
|-
|Audio Interface (Firewire)
|Helix 18 Board
|Phonic
|Works OOB
|Yes
|-
|USB Audio Speakers
|Companion 5
|Bose
|Fully working OOB, even getting audio after original install. Zero setup.
|Yes. No patch required as appropriate USB drivers are built-in.
|-
|USB Printer
|MFC-240C
|Brother
|Works w/Mfg supplied Drivers Print/Scan/Copy all work
|No, Need Drivers
|-
|USB Printer
|MP 160
|Cannon
|Detected as MP 160, Works OOB
|Use Auto Update for Drivers
|-
|USB Printer
|Laser 1700
|Dell
|Works w/Dell 1720 OS X Drivers
|No, Need Drivers or use Generic Postscript
|-
|USB Flash Card Reader/Writer
|Imagemate 5in1
|SanDisk
|Works OOB.
|Yes
|-
|FireWire 800 PCI-E
|89153
|DELOCK
|Works OOB.
|Yes
|-
|FireWire 400 PCI
|BYTECC PG-FW-310 Firewire PCI Card
|BYTECC
|Works OOB. NO patch needed.
|Yes
|-
|FireWire 400 PCI
|PCI Firewire 1394 VIA 3x6P
|PCtronix
|Works OOB. NO patch needed. Chipset VIA VT6306
|Yes
|-
|FireWire 400 PCI
|SYBA IEEE 1394a Model: SD-VIA-FW1E1H
|SYBA
|Works OOB. No patch needed
|Yes
|-
|FireWire 400/800 PCI and PCI-X
|PCI-32T
|SIIG
|Works OOB. No patch.
|Yes
|-
|}