HCL 10.5.2

Latest revision as of 23:36, 2 October 2017

Template:10.5.2

This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.

ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
Please add hardware into tables.
This is for 10.5.2 builds only.

For how to edit the Wiki, please see this thread. Thank you!

[edit] Motherboards

[edit] Abit

INTEL CPU

Hardware Name (alphabetical)ƒ	Chipset	Notes	EFI/Vanilla kernel working	Fully Working w/o Patch
AB9 Pro	Intel P965 & ICH8R	Install Method (1): Leo4All v3 BIOS Version: 22 Audio: Works LAN: Works Install Instructions: Formatted as Fat32 using XP and Acronis (could've used anything), then erased with disk utility in OSX install Installed using Vanilla Kernel, and default SMBIOS selections under customize Complete Install and Reboot Use -v on first boot Used NVKush found here Update to 10.5.6 worked but not fully tested yet (using DSDT Patcher and OSX86 Tools.) Followed the guide here Install Method (2): Kalyway 10.5.2 dvd rom (SATA works - had problems using IDE optical drive) BIOS Version: 22 LAN: Works OOB USB: Some problems, solved using USB fix kext (see right ->>) SOUND: Onboard works OOB, but requires kext for custom soundcards like M-Audio here VID RESOLUTION: Depends on vid card, see here for hd48xx thread! Install Instructions: Installed via sata dvdrom (IDE not recognised) found here Seperate Sata HDD formatted (fat32) using Installer and installed onto Vanilla kernel worked fine, don't add or change anything yet at install. Use -v on first boot	EFI & Vanilla Kernel works Works out of box!	No patch needed for LAN Kalyway USB fix here (if needed) Get kexthelperB7 to install kexts from cheetha.net
AB9 QuadGT	Intel P965 & ICH8R	Install Method: Kalyway 10.5.1 & Combo Update BIOS Version: Unknown; Revision: Unknown Audio: Works with patch below LAN: Unknown SATA & IDE: Problem Install Instructions: Partitioned as MBR Installed using Vanilla Kernel, and MBR selections under customize Complete Install and Reboot Use -x on first boot Setup First boot in safemode Use kexthelper (here) to install kexts below Install Sound Driver for Onboard sound from here	EFI & Vanilla Kernel works	Audio Needs patching
AW9D-MAX	Intel 975X	Install Method: Leopard-10.5.2-AMD-EFI.iso DVD BIOS Version: 15; Board Revision: 1 Audio: WORKS With AzaliaAudio (from DVD) LAN: Both WORK OOB SATA & IDE: Works OOB (SouthBridge SiliconImage Driver from DVD used) ATI Sapphire 3870 works (if you find the right combination of drivers to install from the DVD...)	EFI w/ Vanilla Kernel WORKS	SiliconImage3132.kext has some ownership problems. chmod/chown + reboot makes the pain go away.
IC7-G	Intel 875PE	Install Method: Kalyway 10.5.1 with 10.5.2 KalywayComboUpdate BIOS Version: 28; Revision: Unknown Audio: Works OOB LAN: Works OOB, no auto-detect at starup, need to disconnect and reconnect to work SATA & IDE: Works OOB	Unknown	LAN has auto-connect problems
IP35 Pro	Intel P35 + ICH9R Chipset	Install method: Kalyway 10.5.1 or Retail Mac OS X Server 10.5 DVD w/ PC-EFI & Combo Updater Kalyway: Install options: Formatted GUID, EFIv8 + Vanilla Kernel Updated to 10.5.2 using Kalyway Intel combo update + Kalyway 10.5.2 kernel Leopard Graphics Update v1.0 worked with no hassle Bios version: 1.4, Rev. unknown Bios setup: SATA set to AHCI; EIST: enabled, Disable bit: enabled Audio works with: AppleHDAPatcher v1.20 + ncx5 ALC888 dump SATA works as AHCI IDE status: unknown LAN works out of the box Firewire works out of the box Mac OS X Server: BIOS Version: 14 Audio: Realtek ALC888 HD, AppleHDA patch LAN: 2x OnBoard Gigabit LAN, no patch (can't remember controller-name) SATA & IDE: 6 Built-In S-ATA ports in AHCI, 2 eSATA ports in AHCI (JMicron), 1 IDE port (JMicron), and 1 floppy port (JMicron). All working.	EFIv8 + Vanilla kernel	No; Audio needs patching
IP35P	Intel® P35/ICH9 Chipset	Install method: Kalyway 10.5.2 Kalyway: Install options: Formatted GUID, EFIv8 + Vanilla Kernel Updated to 10.5.4 from Apple Site + using Kalyway Intel combo update 10.5.3 + Kalyway 10.5.2 kernel Leopard Graphics Update v1.0 worked with no hassle Bios version: 11, Rev. unknown Bios setup: SATA set to AHCI; EIST: enabled, Disable bit: enabled Audio: Currently not working SATA works as AHCI IDE status: Working out of box LAN Working out of the box Firewire Working out of the box Audio: Unknown LAN: 1x Gigabit SATA & IDE: 6 Built-In S-ATA ports in AHCI, 2 eSATA ports in AHCI (JMicron), 1 IDE port (JMicron), and 1 floppy port (JMicron). All working.	EFIv8 + Vanilla kernel	No; Audio Currently Not Working
IP35-E	Intel P35	Install Method: Kalyway 10.5.1 & Apple 10.5.2 Update BIOS Version: 15; Revision: Unknown Audio: Need patch from here or essay LAN: Works OOB SATA & IDE: SATA works OOB, IDE works after install Optical Drive: Which one? Any weird problems with installation? Shutdown / reboot works only with 10.5.1 - needs custom kernel for 10.5.2, Sleep not tested	Vanilla & EFI works	Audio needs patching
IX38 Roadster	Intel X38 + ICH9R Chipset	Install Method: BrazilMAC 10.5.0 (Updated to 10.5.2 using Kalyway Intel combo update) BIOS Version: 12 Audio works with: AppleHDAPatcher v1.20 + ncx5 ALC888 dump LAN: Works Native SATA & IDE: SATA works in AHCI mode. Does not work in RAID mode. Firewire works out of the box	EFI/Vanilla kernel: Not Tested	No, audio needs patching.
LG-95	Intel 945GC + ICH7	BIOS version: 10, Rev. 1.0 Installation (10.5.0) method: BrazilMAC method with EFI 8.0 on GPT using iGuru guide Update to 10.5.2: Netkas method Audio (ALC 888): Works with skippyretard patch Video (GMA 950): Works with modified AppleIntelIntegratedFramebuffer.kext from BrazilMAC guide LAN: Works out of the box IDE and SATA: Works out of the box ACPI: Sleep/Wake/Restart work (Shutdown works half of time)	Yes	No, audio and video need patching
LG-95	Intel 945GC + ICH7	BIOS version: 14 Installation method: Leo4all v2 (10.5.2) with Vanilla Kernel 9.2.2 Audio (ALC 883): 2ch only so far. Works with Azalia patch from skippyretard. Tried the 883 kexts from Leo4all v2 install, latest Taruga's 5.1 kext (April 24th, 2008) and mens wetsuits skippyretard's 883 pkg with no luck. Linux reconizes ALC883 OK. Maybe the guy up here with an ALC888 has a different mobo revision. Video (GMA 950): Works with GMA950 driver from the Leo4all install DVD. QE/CI enabled and no artifacts. Resolution fixed at 1024x768, I changed it editing com.apple.Boot.plist adding <string>"Graphics Mode"="[email protected]"</string>. There is some minor mouse blinking when moving over the dock, hardly noticeable. LAN: Works out of the box IDE and SATA: Works out of the box ACPI: Restart & Shutdown works fine so far. PROs: Very cheap and compatible. CONs: NOT an overclocker motherboard, FSB is locked in the Bios.	Yes	No, audio needs patching
Fatal1ty F190-HD	ATi Radeon Xpress 1250	Install Method: Kalyway 10.5.1 - 10.5.2 Kalyway Combo Update BIOS Version: Modded from Abit Forum; Revision: 17 Audio: Realtek ALC888, Download Installer Here LAN: Works OOB SATA & IDE: IDE and SATA full Function OOB however you must use SATA channels in order i.e. miss something plugged in on the first sata channel and the installer will not find anything in channels 2, 3 and 4 and you will get 'IOATAStorage controller' blocking Bus error in verbose mode. Optical Drive: LG Sata DVD-RW/RAM drive no problems Shutdown works, restart doesn't, Unsure about sleep. There is no support currently for the x1250 integrated graphics. PRO:'s Cheap Mobo good features looks amazing and is M-Atx. Overclocks well. CON:'s No integrated Graphics but I am using an ATi 3850 HD Card with full QE/CI so no real loss overall its a great little board!	Yes	No audio needs patching and onboard graphics don't allow resolution change or QE/CI due to no graphic kext.
Fatal1ty FP-1N SLI (maybe FP-IN9? there is no "1N")	LGA 775 NV® NF650i SLI™	Install method: Kalyway 10.5.2 to a Primary SATA Partition, partitioned through Diskpart in Vista to AF. Bios: 14 with SLIC table Patch (this shouldn't matter) Audio: Works OOB, with Jack Sensing working well USB: Seems to work well. Logitech USB headset works perfectly OOB LAN: OOB All power functions work OOB RAM: All 4GB working perfectly. Loving my 4Gb Mac	Yes	All good
I-45C	945 GC / ICH7 GMA950	Install method: Kalyway 10.5.2 to a Primary IDE Disk Audio: Works OOB USB: Seems to work well. USB keys/HDD OK. Logitech Webcam OK with macam. IDE : OK SATA : not tested LAN: Works OOB (Marvell kext included in Kalyway 10.5.2) Video : Works OOB Power functions not tested RAM: All 4GB working perfectly. Price : 40 Euros !!! ;-)	Unknown	All good
I-45CV	945 GC / ICH7 GMA950	Install method: Kalyway 10.5.2 on 300GB Maxtor IDE Processor: Intel Dual-Core E2200 2.2GHz Audio: Works OOB USB: Works OOB. Externall USB HD, USB pendrive, CF card reader, Bluetooth pen. IDE : OK. Maxtor 300GB and Philips DVD burner. SATA : Works OOB LAN: Does not work. Not detected. I installed a 6€�realtek 8139 based card. Worked OOB Video : Works OOB (intel GMA950 driver included on Kalyway). Resolutions up to 1280x1024 Power functions work Ok but not with Vanilla kernel. Sleep works if selected S1 mode on Bios. RAM: 1x Kingston 2GB DDR2 667 working perfectly. Price : 35€�MotherBoard	Vanilla kernel works, but power functions not ok. (doesn't resstart nor shutdown)	LAN doesn't work.

AMD CPU

Hardware Name (alphabetical)	Chipset	Notes	EFI/Vanilla kernel working	Fully Working w/o Patch
Abit AN-M2[1], Sammelthread AN-M2 (german)	NF630a NVIDIA® 7050	Install Method: Kalyway 10.5.2, Atkos 10.5.2 AMD, Leo4Allv4.1 BIOS Version: Abit; Revision: 18 BIOS setup options: lan bootrom enable; sata->raid->AHCI Audio: Works out of the box LAN: works with this add 0x054C10DE to IOPCIPrimaryMatch (Info.plist), surfing online surf shop ok so far, issues with filezilla IDE: Full DMA speed with AppleNforceATA.kext and IOATAFamily.kext from Leo4allv4.1 (MCP67) SATA: not fully tested yet (enable AHCI under SATA/RAID) USB: ok VIDEO: Framebuffer only, no accel Shutdown, restart works, sleep not tested Install Instructions: Partitioned as MBR Installed using an AMD Kernel, and MBR selections under customize Complete install and reboot Use -s on first boot "mount -uw /" then "passwd" and set a password Delete or move all graphic driver: "cd /SYSTEM/LIBRARY/EXTENSIONS; rm NV; rm ATI" "touch /var/db/.AppleSetupDone" finally "exit" Edit /Library/Preferences/SystemConfiguration/com.apple.Boot.plist for your framebuffer screen resolution: <key>Graphics Mode</key><string>1280x1024x32</string> Overall: A Cheap and very energy efficient AMD board (17W idle with Sempron1100/1200/0.8V, 2.5HD, PSU)	EFI ok	LAN, IDE needs patching

. . . . . . . .

[edit] Albatron

Hardware Name	Chipset	Notes	EFI/Vanilla kernel working	Fully Working w/o Patch
PX845PEV Pro	i845PE Chipset	Install Method: Unknown BIOS Version:; Revision: 800 v2 Audio: Realtek AC97 ALC 655 Working LAN: Via Rhine III Working	Unknown	Yes

[edit] AOpen

Hardware Name	Chipset	Notes	EFI/Vanilla kernel working	Fully Working w/o Patch
I975XA YGD	i975	Install Method: Kalyway 10.5.1 & Update BIOS Version: Unknown; Revision: Unknown Audio: Works with ALHC888 and Apple HDA Patcher v1.20 LAN: Not tested SATA & IDE: IDE works, SATA not tested Wireless: Atheros 300N works well with RT2860 drive ----------------------------------------------------- 2nd Install Method: Leopard-10.5.2-AMD-EFI BIOS Version: 1.10a CPU: Intel Core2Duo T7400 2,16Ghz @ 2,4 Ghz - FSB 185Mhz RAM: 4GB (4 x 1GB DDR2 800Mhz) Graphic adapter: ASUS EN8600T Silent 512MB - NVInstallerV.33.pkg works nice! Audio: didn't work with Apple HDA Patcher v1.20 - beta4some861_880Installer.zip worked LAN: works Installation time for 2nd method 90 minutes	EFI works	Audio needs patching
i975Xa-YDG	Intel 975X	Install Method: Kalyway 10.5.2 Intel AMD OSX86 BIOS Version: 6PG; Revision: 1.09 Audio: Yes LAN: Yes SATA & IDE: Yes Wireless: None CPU: Intel CoreDuo T2400 1,83Ghz @ 2,8 Ghz - FSB 255Mhz RAM: 3GB (DDR2 800Mhz) Graphic adapter: ASUS 3870 Audio: Yes LAN: Yes	Kalyway customization: Kernel_9.2.2_modin for USB to work, NATIT_For_X2000_X3000_series for video to work	Yes

.

[edit] Asrock

INTEL CPU

Hardware Name	Chipset	Notes	EFI/Vanilla kernel working	Fully Working w/o Patch
ASRock 945GCM-S	Intel 945gc & ICH7R	Fully working using iAtkos 2.0i, BIOS update not needed (using 1.20); Type "cpus=1" at install. It takes about 5 minutes at boot. Audio, video (Quartz, 1024x768, some mouse tearing) LAN, USB works ok. WLAN using D-Link DWA-520. Dual boot with XP, does not work with Windows 7.
Asrock 4core 1333 eSata2	Intel P31/G31 & ICH7R	SATA and PATA and IDE works Onboard Lan works Attached Graphics card works fully onboard USB 2 works Onboard Audio works Onboard Firewire does not work Floppy Dirve does not work in Mac OS.	YES	Needed to install a BIOS update to work. Firewire needs patch
Asrock 4CoreDual SATA	VIA Apollo PT880Pro/PT894	Install Method: Kalyway 10.5.1 & Kalyway Combo Updater BIOS Version: 1.9; Revision: 1 Audio: Works OOB LAN: ViaRhineIl works with Stevo4 Patch SATA & IDE: Both work OOB (may need to append SATA ID 0x73721106 into AppleVIAATA.kext for SATA to work on SATA2 board)	PC-EFI works	LAN needs patching
Asrock 4CoreDual-SATA2	Northbridge: VIA® PT880 Pro/PT880 Ultra - Southbridge: VIA® VT8237S	Install Method: Kalyway 10.5.1 w/TheStevo4 ppf + Kalyway 10.5.3 ComboUpdate BIOS Version: 1.9 (2.0 doesn't works) BIOS Options: defaults Options Audio: ALC888 in & out stereo working (7.1 not tested) LAN: ViaRhineII work with this kext IDE: Works, SATA: Works with this PKG or if you want to inject the kext into you iso file use this kext and use this method for the english users use google translation Sleep, Shutdown & Restart Works with the 10.5.2 Sleep_kernel	PC-EFI works, NO Vanilla Kernel (VIA Chipset)	TheStevo4 Patch, alc888, ViaRhineII and SATA
Asrock Conroe 1333	Intel 945GC & ICH7	Install method: Kalyway 10.5.1 or Kalyway 10.5.2 Install options: Vanilla Kernel, BOOT_efi_mbr Updated to 10.5.2 using the original Apple combo update using Devin's procedure on insanelymac [2] Updated to 10.5.3 using Kalyway 10.5.3 combo update (had to reinstall discrete nVidia card driver afterward through NVinstaller to get Display Resolution change and QE/CI working again) Updated to 10.5.4 using the original Apple update tool without any problems Leopard Graphics Update v1.0 normal install, works Bios version: P 1.30 (no other firmware later than 1.30 works -tested up to 2.10-) SATA + PATA works Onboard LAN work Audio works with alc_out (2ch out only)	YES	Audio needs patching
Asrock Conroe 1333	Intel 945GC & ICH7	Install Method: Kalyway 10.5.1 & Update to 10.5.2 following Netkas's guide BIOS Version: P1.30; Revision: 1.0 BIOS Options: CPUMAXID set to disbled Audio: ALC888, AFAIK only Azalia 2.1 output LAN: Works OOB SATA & IDE: Both work OOB	PC-EFI v8 & Vanilla Kernel work	No, Audio needs patching
Asrock Conroe-1333 D667 Rev. A/G 1.03	Intel 945GC & ICH7	Install Method: Kalyway 10.5.2 Modified BIOS Version: 1.80; It's nice to have BIOS 1.80 because it supports latest CPUs BIOS Options: Default Options Audio: Works without Patches (Except Input) LAN: Works OOB SATA & IDE: Works OOB You can find the Moded BIOS here[3]	PC-EFI & Vanilla Kernel work	Everything Works Without Patching. Credits go to Kabyl (InsanelyMac) He made the moded BIOS.
Asrock Conroe 1333 D667	Intel 945GC & ICH7	Install Method: Kalyway 10.5.1 + Devin 10.5.2 Update method BIOS Version: 1.3; Revision: Unknown BIOS Options: HPET "Enabled", Execute bit "disabled", Suspend to ram "Auto" Audio: Need ALC888 patch but no input LAN: Works OOB SATA & IDE: Works OOB	PC-EFI & Vanilla Kernel work	Audio needs patch
Asrock ConRoe945G-DVI	Intel 945G + ICH7	Install Method: Kalyway 10.5.2 SleepKernel EFI8 MBR BIOS Version: v1.90 Audio (ALC888): 2Ch Out Works with AppleAzaliaAudio and KEXT-Edit LAN (R8111B): Works SATA & IDE: Works Video (GMA 950): Works	EFI v8 Works	Audio Needs patching
Asrock 775V88+	VIA® PT880 chipset	Install Method: Kalyway 10.5.2 BIOS Version: Unkown BIOS Options: Unkown Audio: Works OOB. But only the left side of the speaker is working. LAN: Needs Via Rhine Driver IDE: Works OOB	Unkown
Asrock P4i65G	Intel 865G (North) & ICH5 (South)	Install Method: Leo4Allv2 10.5.2 BIOS Options: Default options. Audio: Need AC97 patch LAN: Not Tested SATA & IDE: IDE works fine, SATA not tested. Also applied ICHx patch and used legacy APCI	PC-EFI works, no vanilla kernel.	Audio needs patch

AMD CPU

Hardware Name (alphabetical)	Chipset	Notes	EFI/Vanilla kernel working	Fully Working w/o Patch
Asrock 939 Dual-VSTA	Northbridge: ULi M1695 Southbridge: ULi M1567	Install Method: Zephyroth AMD 10.5.2 Rev.1 Options: 9.2 kernel Audio: unknown, using usb sound card LAN: Onboard Not Recognized, using realtek card SATA & IDE: use this kext for full speed No PS/2	unknown	Onboard audio, lan and ps/2 need patching
Asrock 939Dual-SATA2	Northbridge: ULi M1695 Southbridge: ULi M1567	Install Method: Zephyroth AMD 10.5.2 Rev.2 Options: 9.2 kernel Audio: ULi M5455 LAN: ULi 5263 SATA & IDE (SATA only working from II slot)	unknown'	Onboard audio, lan (lan works after install until first reboot then breaks) need patching (Works in 10.5.4! See HCL_10.5.4#Asrock and threads for LAN driver and Audio driver)
Asrock ALIVE NF6G-VSTA	NForce 4 (MCP61)	Install Method: Zephyroth AMD 10.5.2 Rev.1 Options: 9.2 kernel IDE/SATA Controller: NForce 430 (MCP61) Sound: NVidia HD Audio (ALC888), IN/OUT/Mic working! Wired Network 1: NForce 430 LAN (03EF, RTL8201CL PHY) (random lockups may occur, extra PCI/PCI-E NIC is recommended)	EFI: Yes Vanilla Kernel: No (AMD CPU)	Audio, SATA and Network need patching (IDE is slow without the patch)
Asrock ALiveNF7G-FullHD R3.0 [4], Sammelthread ALiveNF7G-FullHD/Ready/720p (german)	NF630a NVIDIA® 7050	Install Method: Kalyway 10.5.2, Atkos 10.5.2 AMD, Leo4Allv4.1 BIOS Version: Asrock; Revision: 1.10 (5/26/2008) BIOS setup options: - Audio: Works out of the box LAN: works with this add 0x054C10DE to IOPCIPrimaryMatch (Info.plist), surfing ok so far, issues with filezilla IDE: Full DMA speed with AppleNforceATA.kext and IOATAFamily.kext from Leo4allv4.1 (MCP67) SATA: not tested yet USB: ok VIDEO: Framebuffer only, no accel Shutdown, restart works, sleep not tested Install Instructions: Partitioned as MBR Installed using an AMD Kernel, and MBR selections under customize Complete install and reboot Use -s on first boot "mount -uw /" then "passwd" and set a password Delete or move all graphic driver: "cd /SYSTEM/LIBRARY/EXTENSIONS; rm NV; rm ATI" "touch /var/db/.AppleSetupDone" finally "exit" Edit /Library/Preferences/SystemConfiguration/com.apple.Boot.plist for your framebuffer screen resolution: <key>Graphics Mode</key><string>1280x1024x32</string> Overall: A cheap, stable and energy efficient AMD board (19W idle with AMD 4850e/1200/0.8V, 2.5HD, PSU). Good undervolting-BIOS: 0.8V	EFI ok	LAN, IDE needs patching
Asrock ALiveNF7G-HDReady [5], Sammelthread ALiveNF7G-FullHD/Ready/720p (german)	nForce 630a (MCP67) NVIDIA® 7050	Install Method (advanced): Retail Leopard installed with custom Pre-Boot CD Kernel: Voodoo XNU Kernel 1.0 Rev. A BIOS Version: Asrock; Version: 2.10 (1/7/2008) BIOS setup options: - Audio: Realtek ALC888, Device ID: 0x055c10de / 0x18490888, Legacy AppleHDA for BOOT-132 LAN: Realtek RTL8211B, Device ID: 0x054c10de, Driver: nForce LAN driver, working OOTB since 10.5.6 IDE: MCP67, Driver: NForceATAController for MCP67 SATA: not tested yet Firewire: not tested yet USB: OK Video: Integrated Geforce 7050 with shared memory, no Shutdown, restart and sleep works (I had to change USB/PS2 standby power jumper)	EFI ok	IDE, sound, LAN needs patching
Asrock ALiveXFire-eSATA2	Northbridge: ATI CrossFire Xpress 1600 (RD480) Southbridge: ATI SB600	Install Method: Zephyroth AMD 10.5.2 Rev.1 BIOS Version: 2.60+; Revision: Unknown BIOS Options: If you want to install on a SATA drive, make sure in the IDE menu, "AHCI" is chosen rather than "Non-Raid" otherwise you may get errors LAN: Works OOB SATA & IDE: Works OOB	unknown	Audio may need patching

. . . . . . . . . . .

[edit] Asus

INTEL CPU

Hardware Name	Chipset	Notes	EFI/Vanilla kernel working	Fully Working w/o Patch
Rampage Formula	Intel X48 + ICH9R	Install Method: Kalyway 10.5.2 with SATA Optical drive BIOS Version: 0403 ADI 1988B Audio: works Marvell 88E8056 LAN: both port works ICH9R SATA: all 6 ports working JMicron JMB368 PATA: works (except optical drive) USB: all working Firewire: not yet tested This board works with 9800GX2 on second PCI-E slot using apple's 9800GX2 OpenGL driver when updated to 10.5.5	EFI working, only 9.2 sleep kernel allow fully functional sleep/wake and shutdown.	Yes. For Kalyway 10.5.2, update with Kalyway 10.5.3 combo + kernel update, 10.5.4 through Apple update. 10.5.5 not yet tested. Only ToH 9.2 sleep kernel works.
P5VD2-MX SE	VIA P4M890	Intel Pentium D 805 Smithfield 2.66GHz, also used Intel Pentium D 935 Presler 3.2GHz with much success. Install Method: Kalyway 10.5.2 BIOS Version: unknown Audio: works after use of OSx86 Tools Realtek LAN: works after use of Osx86 Tools (used and old LAN from a Compaq Presario Pentium 2, worked OBO, then downloaded and installed kext for Realtek) SATA: comes and goes USB: all working Firewire: works fine VGA: Nvidia 6200 LE 128MB, installed Titan Driver and EFI strings, got rid of crappy 1024X786 resolution, now running at 1440X900. XFX 7600 256MB Nvidia card also works but system prefers the older card for some reason.	EFI working, Chameleon V8 installed afterwards, Darwin was shaky, had to use Boot123 to get system working	Not exactly, but Osx86 Tools fixes almost everything. Just don't try to update to 10.5.6 or 10.5.7. Do not try to update to higher system, tried using Atkos 10.5.5 and iPC 10.5.6, both fail after three reboots.
P5E Deluxe	Intel X48 + ICH9R	Install Method: Kalyway 10.5.2 / iATKOS_Si 10.5.5 with SATA Optical drive BIOS Version: 0205 ADI 1988B Audio: works (kalyway default selection works, iATKOS need patch from here) Marvell 88E8056 LAN: works (kalyway default selection works, iATKOS need to install the marvel pkg extracted from kalyway dvd) ICH9R SATA: all 6 ports working JMicron JMB368 PATA: not yet tested USB: all working (if system is 10.5.4 or above, 9.2 sleep kernel will not mount any usb device, need 9.5 voodookernel) Firewire: not yet tested	EFI working, 10.5.3 or older + 9.2 sleep kernel allow fully functional sleep/wake and shutdown, otherwise 10.5.4 or above need 9.5 voodoo kernel	Yes. everything works right out of the box with all default selections with Kalyway. Sounds/Lan need patching if using iATKOS_Si 10.5.5
Maximus Formula	Intel X38 + ICH9R	Install Method: Kalyway 10.5.2 BIOS Version: 1201 Audio: Speaker and Digital Out works (sometimes have some minor issues) LAN: OOB SATA & IDE: OOB JMicron PATA: OOB USB: OOB (May not recognize all USB ports) Firewire: integrated VIA VT6308 works but crappy... buy a firewire pci card with VT6306 Had keyboard error with USB/PS2 adapter, no error using PS2 directly Install from dvd sata otherwise "still waiting for root device" USB DVD Installation works also Updating to 10.5.3 using "software update" does NOT work Shutdown does not work properly, fans keep rotating	EfI & Vanilla Kernel	yes, except audio
P5E	Intel X38 + ICH9R	Install Method: Kalyway 10.5.1 - Install Info Below BIOS Version: 303; Revision: Unknown Audio: Audio Out works OOB, In doesn't work LAN: Works OOB SATA & IDE: Both work OOB Optical Drive: Which one? Any weird problems with installation? Do shutdown, reboot and sleep work? Installation Instructions: Combo Update (No Reboot) Kernel Update (No Reboot) Repair Permissions Reboot Apple Graphics Update (No Reboot) New Natit Driver Repair Permissions Reboot	EFI v8 & Vanilla Kernel	Yes
P5W DH Deluxe	Intel 975X + ICH7R	Install Method: Kalyway 10.5.1/10.5.2 BIOS Version: 2602; Revision: 1.04G Audio: Realtek ALC882M works LAN: Marvell 88E8053 both ports work out of box SATA: all port works, ICH7R IDE works, Jmicron IDE work Onboard WiFi work with realtek 8187 drivers but unstable\| Onboard FireWire: Both ports (1 backpanel and 1 in case) work OK. ez_raid ports work out of the box, natively. Raid0 works natively.	Yes	onboard wifi needs patching
P5QL-PRO	Intel P43 + ICH10	Install method: iDeneb 10.5.5 BIOS Version: Pathced 0601 DSDT FIX. Audio: Realtek ALC1200 - work with ALCInject.kext & AppleHDA.kext. LAN: Attansic L1 - kext from iDeneb disk doesn't work. Use PCI Realtek. SATA - OOB. IDE - did't test. ACPI (Shutdown, reboot) - work fine. Video: nvidia 7300 GT - work with NVinject from iDeneb disk.
P5K Deluxe WiFi	Intel P35 + ICH9R	Install Method: Kalyway 10.5.2, updated to 10.5.3 with Kalyway combo 10.5.3 update, iDeneb 10.5.5 BIOS Version: 812; Revision: Unknwon Audio: Internal AD1988B only stereo out WORKS OUT OF BOX,audio in: works after patching with Taruga AD1988B rev3 Installer. but require to reinstall video. LAN1: Realtek WORKS OUT OF BOX, required to be ON in BIOS for Time machine to work LAN2: Marvel Yukon on internal PCIe bus fully works WORKS OUT OF BOX WLAN: Does not work, but there exists a patch to get it working SATA & IDE: Both SATA controllers fully work, IDE CD-ROMs and DVD-RW work	EFI & Vanilla Kernel Work	YES
P5K-E WiFi/AP	Intel P35 + ICH9R	WORKS OUT OF THE BOX: ICH9 6x Sata ports Jmicron 2x E-Sata ports Firewire, USB, COM1 WORKS AFTER PATCHING: Audio=ad1988b fully working (stereo, 5.1 digital output, microphone,volume control) using taruga's drivers: [6] Lan=marvel88e8056 Wifi=realtek 8187l, configured as ethernet and uses Realtek app. Leopard WIFI drivers now available here! WORKS FOR SOME/GIVES SYSTEM CRASHES IDE/PATA works BIOS SETTINGS (Update to latest 1004 or 1006): Set HDD-controllers 'ich9/jmicron' to AHCI mode, powerstate=S3 Processor: Enable apic2.0, disable speedstep, disable c1e, enable VT and XT 4gb ram working < dependent on BIOS settings, read the forum if you have kernel panic!!! Install method easy: Kalyway 10.5.1 Install DVD 'select right patches, try MBR if GUID fails' Updated to 10.5.2 using Kalyway ComboUpdate and kernel update. Updated to 10.5.4 using software update (vanilla 9.4 kernel works great, sleep works, everything works :D) iATkOS users use this thread Another Install Method (that I used after the easy method failed for me): Kalyway 10.5.1 Install DVD 'deselect everything except vanilla kernel, and MBR' Immediately update to 10.5.3 using Kalyway ComboUpdate, following its instructions closely (meaning apply kernel update before rebooting) Immediately update to 10.5.4 using software update (vanilla 9.4 kernel) Then install drivers like NVInstaller v.52 (if you have an nvidia video card) or audio drivers, etc. Install method advanced: Retail-Leopard-DVD, GUID, pc-efi8, with retail kexts 'remove appleintelcpupowermanagment.kext, add dsmos.kext', only AUDIO/LAN/VIDEO.kexts needs to be added after that, also may add applesmbios.kext for showing right info in system profiler. Retail-Leopard 10.5.2 + graphics update also work. see netkas.org for howto	YES	On DVD (Kalyway) or patch (iAtkos)
P5K Premium/WiFi-AP	Intel P35 &Intel ICH9R	Kalyway 10.5.2 Version 0802 ADI AD1988B, AzaliaAudio only back connection RealtekRTL8110SC & Marvell88E8056 SATA works, IDE Works not as good HP dvd1070, works out of the box. all burning features working Restart and Shut down working out of box, sleep with newer version of kernel	yes	USB(memory sticks and cards) issues: only reads if was installed at start up.
P5KC	Intel P35 & ICH9	Install Method: Kalyway 10.5.1 and 10.5.2 Combo Updater BIOS Version: 2602 or 0903; Revision: Unknown Audio: ACL883 Tarugas patch or ALC883 driver on install DVD SATA & IDE: SATA works, IDE not tested LAN doesn't work. Onboard WiFi works For some people, install the new kernel before the update	EFI & Vanilla Kernel	No. LAN doesn't work
P5K	Intel P35 + ICH9	Install Method: Kalway 10.5.1 - upgraded to 10.5.2 BIOS Version: Unknown; Revision: Unknown Audio: Using onboard with ALC883 installer LAN works with this driver (maybe hangs after sleep) SATA & IDE: SATA works, in AHCI Mode Stable having flashed P5KR bios 403 on P5K using AFMotherboard ModelUDOS /N to force ICH9 into AHCI mode Now running for week stable with MAXMEM = 3072 in boot.plist, kept crashing without this option with 4GIG of RAM	EFI & Vanilla Kernel	Audio and LAN need patching
P5K EPU	Intel P35 + ICH9	Install Method: Kalway 10.5.2 BIOS Version:; Revision: Unknown Audio: Using onboard with ALC883 installer. Inline/mic don't work, 5.1 channels works. All channels works with AppleHDA patcher method. LAN: OOB SATA : OOB FireWire : OOB USB : OOB for all 8 USB ports Optical Drive: sata Samsung generic DVD-R Shutdown and reboot work, sleep freeze on wake up. Only tested with Vanilla 4Gb ram with no problem. Mixing PS/2 keyboard and USB mouse with no problem.	Yes	No, sound need patching, use AppleHDA patcher to get all channels input and output.
P5K PRO	Intel P35 + ICH9R	Install Method: Leo4all v.3 and Kalyway 10.5.3 combo update BIOS Version:0806 BIOS setting: no changes needed, standard Audio: Realtek ALC883 - functional with 883 driver and patched kernel LAN: Marvell 88E8056 - functional using SKGE driver SATA & IDE: This board uses Marvell IDE driver, so you need to instal both drivers for Intel ICHx chipsets and "VIA Sis Marvell and SB chipset driver". Optical Drive: LG multi format drive on IDE, no problem USB - works OOB Do shutdown, reboot and sleep work? With Vanilla kernel yes, with patched kernel no. But Vanilla has problem with Core 2 Quad processor.	Yes	Almost everything works OOB, with patched kernel does not work power management.
P5K SE	Intel P35 + ICH9	Install Method: Kalyway 10.5.2 and 10.5.3 Combo Updater BIOS: 1008, standard settings CPU: manual overclocking possible (45 nm CPU tested) Audio: select alc883 kext during install (only tested analog stereo line-out, line-in an mic in: works). LAN: Onboard LAN requires installation of the DaemonES/MadInt driver/package. If you put your computer to sleep, onboard LAN stops working at wake up. It works again after rebooting. PCI-card Realtek RTL8169 works out of box; D-Link DGE530T 1GigE with skge-e.kext (Driver from D-Link website doesn't work). SATA: SATA works alright out of the box (as long as you don't enable SATA RAID). IDE (and possibly E-SATA) - Marvell chip 88SE61xx - needs patching: Marvell and others ATA kext for Leopard, by podarok - works after patch but crashes sometimes during trys to burn a DVD with Toast. USB: Works without problems USB Booting: Functional, at least after installing with internal SATA connection. Bear in mind that your system may lock up if power settings are configured to turn the HDD off after a certain period of inactivity. Optical Drive: IDE, SATA, and USB Optical Drives are supported.	Yes	No: both onboard LAN and IDE require patching.
P5E-VM HDMI	Intel G35 & ICH9R	Install Method: Kalway 10.5.2 BIOS Version: 0506 Onboard Audio works - ALC 883 (S/PDIF not tested yet) Onboard Firewire works - VIA VT6308P Onboard Video (x3500) works but not accelerated VESA 3.0 Onboard SATA works, PATA not tested HDMI Output not tested yet Onboard LAN does not work OOB - Atheros L1 PCI-E Gigabit works with DaemonES/MadInt driver/package. Onboard RAID does not work out of the box Shutdown and Reboot works perfectly, Sleep does not work Startup welcome movie works USB 2.0 ports working (BIOS: Advanced > USB Configuration > Bios EHCI Hands-off "disabled") Used Vanila Kernel	EFI working	Everything but LAN is working
P5E-VM DO	Intel Q35 + ICH9DO	Install Method: Kalyeay Leopard 10.5.1, manual Update 10.5.2 kalyway combo update, BIOS revision: latest, BIOS settings for stock/vanilla kernel with sleep mode bit problem]) Audio: Realtek® ALC883, 8-channel High-Definition Audio CODEC: works out of the box, some problem after 10.5.2 LAN: Intel® 82566DM PCIe Gigabit LAN controller: not work patch unavailable SATA: works out of the box IDE: no test onboard USB to front:works out of the box onboard USB to back: works out of the box onboard Intel® Graphics Media Accelerator 3100 (Intel® GMA 3100) integrated: not used)	no kernel vanilla patch apply and works well	some problem with network card intel pro 100 auto disconnect after computer stan-by usb device storage auto unmount. Running stable in the end!
P5K-VM	Intel G33 + ICH9	Install Method: Kalyway 10.5.2, manual 10.5.3 Kalyway combo update (works), apple 10.5.4 update works BIOS 803: latest, BIOS settings standard CPU: Overclocking no problem (Wolfdale) RAM: 8 GB (4 x 2 GB) DDR2 800 MHz recognized Audio: Realtek® ALC883, 8-channel High-Definition Audio CODEC: analogue works out of the box (selected during install, only stereo tested), can't get the front audio panel to work (neither digital nor AC97) LAN: Marvell88E8056® PCI-E Gigabit LAN controller: works out of box. I had to use EFI String to get TimeMachine to work, because it can't find the MAC address. SATA: All 4 ports work out of the box need to set SATA mode to AHCI in bios IDE: JMicron® JMB368 works out of the box USB: works out of the box. I had to disable PCGenUSB in Kalyway installation to get USB Mass Storage working properly Firewire: works out of the box onboard Intel® Graphics Media Accelerator 3100 works. With Apple graphics update I tested 1600x1200x32, but resolution must be set with Kernel parameter at boot. Software RAID is working using Chameleon	Yes	near 100% working out of the box, sometimes does not completely shut down
P5B SE	Intel P965 + ICH8	Install Method: Kalyway 10.5.2 BIOS Version: 0302 Audio: Onboard, AzaliaAudio.pkg only 2ch stereo is working LAN: Onboard, Attansic L1 Ethernet SATA & IDE: SATA works, IDE not testd, can't add another drive Optical Drive: HP1070, work out of the box. Originally tried to install with an old ide dvd drive. had to use a SATA shutdown does not shutdown completely. restart works, sleep not tested firewire pci card works out of the box	BOOT.EFI.V80
P5B Deluxe	Intel P965 + ICH8R	Install Method: Kalyway 10.5.1, Upgrade: Kalyway_Hack_10.5.2ComboUpdate ComboUpdate method, be prepared for several lengthy reboots. Relax & just let it run. P5B Deluxe BIOS Ver.1226 Audio: AD1988B 8-channel High Definition Audio still not working after update (patches not tested) JMicron JMB363 SATA / PATA controller NOT TESTED (2 x External SATA 3.0 Gb/s ports) Intel Matrix Storage Technology (RAID) controller not recognized by OS X All six (6) SATA 3.0 Gb/s internal ports tested working in ACHI (after upgrade) IDE mode NOT TESTED Marvell Gigabit LAN Port 1 working; Port 2 still not working (patch not tested) All ten (10) USB 2.0 ports working All PCI Slots working Both (2) FireWire ports working (TI 1394a controller) Partitioned as MBR using EFI bootloader TimeMachine working Software RAID drives created w/ DiskUtility still working fine after upgrade	EFI v8 + Vanilla Kernel	No; Onboard Audio and LAN port 2 need patches
P5B-E Plus	Intel P965 + ICH8R	Install Method: Kalyway 10.5.2 BIOS Ver. 0627/0633 Audio: AD1988B 8-channel HD Audio only in Stereo (default patches in Kalyway custom install; BIOS: Advanced > Onboard Devices Configuration > Front Panel Support Type "AC97") Internal SATA (x6) ports working in ACHI and RAID JMicron JMB363 SATA in AHCI (not PATA) IDE mode not tested Marvell Gigabit LAN Port working (default patches in Kalyway custom install) USB 2.0 ports working (BIOS: Advanced > USB Configuration > Bios EHCI Hands-off "disabled") FireWire (kernel/System.kext versions must match) Partitioned as MBR with EFI v.8; GUID works as well TimeMachine works Note: Does not wake up from sleep.	MBR + EFI + Vanilla Kernel, GUID + Kabyl	Not quite, but close; Onboard 7.1 Audio only in stereo
P5B PLUS	Intel P965 + ICH8	Install method: Kalyway 1.5.1 + Kalyway Combo update Onboard audio: Working (With Kalyway audio patch) Onboard LAN: not Working Sata: full working IDE: Works after Install. For boot Sata drive needed. Video: Working with Kalyway Nvinject.	EFI v8 working. Vanilla 9.2.0 working.	Audio needs Azalia patch
P5GC-MX	Intel P965 + ICH8	HD fresh install with GUID using Disc Utility iATKOS v1.0i SSE3 with vanilla kernel 10.5.1 Used PC_EFIv8 for GUID booting Updated to 10.5.2 using the original Apple combo update but using Devil's procedure on insanelymac Onboard LAN work with driver, download the driver here Audio works with HDAPatcher ALC883.	YES	Audio needs patching, and need a LAN driver .
P5B	Intel P965 + ICH8	Install Method: Kalyway 10.5.1, ComboUpdate + Kernel Patches applied in 10.5.1 or "Onetracks perfect install" works with ToH RC2 which is a lot of work BIOS: Unknown Audio: works after upgrade, needs patch in 10.5.1 Storage: ACHI working; Install from IDE not working, install to IDE unknown LAN: Working Partitioned as MBR using EFI bootloader Onetrack: Audio: Needs editing or patching AppleAzaliaAudio.Kext, audio in not supported LAN: Works OOB SATA & IDE: Works OOB (JMicron IDE works OTB with Kalyways install Disc, otherwise JmicronATA.kext needs editing)	EFI & Vanilla Kernel	No, Patches applied in 10.5.1
P5KPL-AM	Intel G31 ICH7	Install Method: iAKTOs_5i Audio: works OOB Realtek RTL8102EL 100/10 LAN : need driver here SATA, PATA both works USB: all working Everything work great after 10.5.6 apple update through "software update" no need change or modify anything LIKE A REAL MAC	EFI working, Vanilla works	Yes. need LAN driver.
P5KPL-AM	Intel G31 ICH7	Install Method: Kalyway 10.5.2 Audio: works OOB, only stereo, no mic support. Realtek works OOB SATA, PATA works OOB USB: all ports working OOB Video: works OOB (no CI and no QE) Sleep, restart, shutdown: Working Firewire: not tested	EFI working, Vanilla works	Yes, everything OOB.
P5KPL-VM	Intel G31 + ICH7	Install Method: Kalyway 10.5.1, Combo Updater, Netkas method Bios release: 303 Audio work LAN Attansic/Atheros L1 work with DaemonES/MadInt driver GMA3100 Onboard Video: doesn't work System Profiler unstable (Need patch from 10.4.10)	PC_EFI_V8 + Grub, Vanilla Kernel	No
P5KPL-CM	Intel G31 + ICH7	Install Method: Kalyway 10.5.2 (boot with -x) Bios release: ??? PS/2 - working with most recent fix SATA - working perfectly, 4 channels PATA - working perrfectly, both channels Audio - Stereo Out only with AppleAzalia (patched) LAN - Atheros not working - using PCI 8139D (no drivers) GMA3100 Onboard Video: doesn't work System Profiler working perfectly - all values correct Sleep/Hibernate - never works - fan always on	PC_EFI_V8	No
P5WD2 Premium	Intel 955X + ICH7R	Install Method: ToH 10.5 > Apple combo 10.5.1 + ToH 10.5.1 kernel > Apple combo 10.5.2 via this guide + ToH 10.5.2 kernel BIOS Version: 0802 (latest available); Revision: beta Audio: Realtek ALC882 - works with Taruga 1.2 patch LAN: Intel PCIe Gigabit LAN Controller (integrated) - works OTB; Marvell 88E8001 Gigabit LAN Controller (integrated) - turned off & not tested FireWire: Texas Instruments 1394a controller (integrated) - works OTB IDE: works OTB; ITE IDE controller (integrated) - turned off & not tested SATA: works OTB; Silicon Image 3132 SATA controller (integrated) - turned off & not tested Asus WiFi-TV PCI card (optional) - not work	EFI v8 works	Audio needs patching
P5WD2 Premium	Intel 955X + ICH7R	Install Method: Kalyway_10.5.2_DVD_Intel_AMD; kernel_9.2_speedstep; NVinject-256. Audio: Realtek ALC882 Disabled in BIOS during install, but installed drivers anyway. When system working well, enabled HD audio in BIOS, and it worked. I call that working OTB LAN: Intel PCIe Gigabit LAN Controller - works OTB; Marvell 88E8001 Gigabit LAN Controller disabled and not tested FireWire: works OTB IDE: disabled and not tested SATA: works OTB; Silicon Image 3132 SATA controller - disabled and not tested	EFI v8 works. Vanilla Kernel will NOT work.	Yes, so far
P5B-MX	Intel 946GZ + ICH7	Install Method: Kalyway 10.5.2 BIOS Version: 0605; Revision: Audio: Audio works with AZALIA by skippyretard Onboard video: Not working (causes kernel panic). LAN: Works with Attansic driver by DaemonES & MadInt SATA & IDE: Both working Requires MBR	EFI & Vanilla Kernel	Audio and network needs patching, and onboard video panics system.
P5GC-MX/1333	Intel 945GC + ICH7	Install Method 1: Upgraded from Kalyway 10.5.1 to 10.5.2 using /"kalyway_hack_10.5.2ComboUpdate/"; Install Method 2: 10.5.1 retail DVD install with assistance of Boot132 CD (by Kalyway) and then Kalyway 10.5.2 updater Onboard LAN: Works with the driver, available for download here. PS2 mouse an Keyboard: works out of the box. SATA: works out of the box. IDE: works out of the box. onboard USB works out of the box. Power off, sleep: work with proper USB and monitor pin configurations Audio works with HDAPatcher ALC883. Onboard Video: works at 1024x768 default (but needs patching to get better resolution)	YES	Audio needs patching, onboard video needs patching, and LAN needs a driver.
P5LD2-VM DH	Intel 945G + ICH7	Install Method: Leopard retail DVD using BrazilMac's way, normal Autoupdates, manual Update to 10.5.2 (Netkas' HowTo here) BIOS revision: 0702 (BIOS settings for stock/vanilla kernel with sleep mode explained here) Audio: ALC 882 chipset (Works with patch found here) LAN: works out of the box SATA: works out of the box IDE: works out of the box onboard USB to front: does not work onboard USB to back: works out of the box onboard GMA950 graphics: works out of the box (and sleeps! But is analog only! Get a Sapphire ATI HD 2600 XT for this Board :-) )	Netkas' PC EFI V8 required to use vanilla/stock kernels	99% working out of the box, besides audio (see left). Running very stable in the end!
P5LD2-VM SE	Intel® 945G + ICH7	Install Method: Retail DVD & web update to 10.5.2(Netkas Method) BIOS Version: 0602 Audio ALC 882: Works with patch LAN: Works out of the box SATA & IDE: Works out of the box	PC-EFI-V8 + Vanilla Kernel work	Audio needs Patching, and couple of kext removed/replaced.
P5AD2-E Premium	Intel 925XE	Install Method: Kalway 10.5.1 Audio: Onboard via Azalia Out LAN: Works, WiFi untested SATA & IDE: SATA works, IDE unknown	Kalyway 10.5.1+ 10.5.2 upgrade
P5GPL-X SE	Intel 915PL + ICH6	Install method: Kalyway 10.5.1, Kalyway 10.5.2 Combo Updater & Kernel Patch BIOS Version: 0301 Audio: ADI1986A - use AppleAzaliaAudio.kext from JaS 10.4.8 DVD (Kalyway 10.5.1 version did not work) LAN: Marvell Yukon 88E8001 - use Marvell Yukon 88E8001 driver SATA & IDE - both work by default	PC EFI (MBR) works, Vanilla Kernel does not	No, LAN and Audio Output need patching
P5P800	865PE	Install Method: Kalyway 10.5.2 DVD BIOS Version:; Revision: Audio: Works LAN: Works, no jumbo frames SATA & IDE: SATA unknown, IDE works Optical Drive: LG DVD_RW, works Shutdown & Reboot works, Sleep works, but sometimes fail	No	With appropriate drivers selected @ installation, the only patch you should find is kalyway 10-5-2 usb patch.
P4PE-X/TE	845PE	Installed using JaS 10.5.4 Client/Server Audio: Editing proper kext did not help no sound ADI1888 Ethernet: works with Installed Patch USB & ATA work using Patches from JaS DVD	Using Cemeleon EFI, Using 9.2.0 ToH kernel (SSE2)	No
Striker II Formula	NVIDIA nForce 780i SLI	Install Method: Kalyway 10.5.2 Bios Version: 1303 (2008/05/16) Audio: 2 Speaker,Digital Out and Mic Works (AD1988b_rev3_Installer) Lan: not working SATA & IDE: works FireWire: works	EFI v8 Works	No, overall system is too unstable
Striker Extreme	NVIDIA nForce 680i SLI	Install Method: Kalyway Update combo 10.5.2 + 10.5.2 SSE3 kernel update to fix boot delay and black screen, efi MBR BIOS Version:1401 Audio: SoundMax AD 1988B, working stereo only, no input with AzaliaAudio.pkg installer LAN: Marvell Yukon 88E8039, working with nforcedeath, both nics, all CPUs enabled, unstable under load SATA & IDE: Does SATA work? Both working flawlessly out of the box (10.5.1 and 10.5.2) Optical Drive: Both IDE and SATA drives working. Both optical drives LiteOn models DVD burners Shutdown, reboot work flawlessly, sleep hangs computer after update to 10.5.2 Video card GeForce 7600GT working Quartz Extreme with latest nvinject 0.2.1 had to edit NVDAResman.kext,NVDANV40.HAL,NVDANV30.HAL with device specific ID and remove all other device ID's	Not tested	LAN and Audio
P5N32-E SLI Plus	NVidia nForce 680i SLI	Install Method: Kalyway 10.5.2 and 10.5.3 Combo Update Package by Mysticus v1.3 CPU: Core 2 Quad Q6600 had to edit about this mac strings file to show that in the about this mac window Audio: Worked for me OOB, with Kalyway 10.5.2 install disk (on the default driver install setup). LAN: Onboard LAN requires installation of the forcedeth driver still doesn't work though, shows as always being unplugged used a D-Link DFE-530TX+ PCI Adapter and that worked fine SATA: SATA works alright out of the box (as long as you don't enable SATA RAID) but freezes sometimes suspects it's because the nforce drivers are still buggy UPDATE: if your system has more than 3 GB of RAM, see if booting with the kernel param 'maxmem=3072' fixes the problem. [Using Kalyway 10.5.2, at least, it fixed the problem on at least one system. Perhaps the SATA driver only uses 32-bit addressing for DMA???] IDE: works USB 1 and 2: works but not able to mount usb drives until after you install the 10.5.3 combo update, don't select PCUSBGen fix, not needed USB Booting: not sure Optical Drive: SATA and USB Optical Drives are supported after 10.5.3 combo update installed Graphics: Nvidia 8600GTS 256 MB with nvinject 256 option selected with full Quarts Extreme and Core Image support (QE/CI) Nvidia 8800GT 512MB; works with full support with Nvinject 512, with dual monitors.	No: select nforce kernel 9.2.0 following guide posted with efi enabled and when using combo update of 10.5.3	No

AMD CPU

M3A78-T	AMD 790GX+SB750	Install Method: iDeneb 10.5.5 BIOS setup options: Enabled AHCI BIOS Version: 602 Audio: Works , Realtek ALC1200 (AppleAzaliaAudio) WORK PERFECT FOR ME. But if you have problems you can use this Kext [7] Network: Onboard Marvell 88E8056 Gigabite LAN. Working Perfect SATA HD and DVD ROM: Work Perfect USB: all working Firewire: Not Tested	EFI v8 Works	Audio and LAN Working Perfect
M3N-HD/HDMI	Nvidia nForce 750a SLI	Install Method: Kalyway 10.5.2 BIOS setup options: Enabled AHCI BIOS Version: 1301 Audio: Works , Realtek ALC1200 (AppleAzaliaAudio) use this Kext [8] Network: Onboard Atheros F1 Phy Gigabit (Not Tested) Belkin G Plus MIMO USB Network Adapter (RUN PERFECT) SATA & IDE: Work Perfect USB: all working Firewire: Not Tested	EFI v8 Works	LAN no tested but Belkin G Plus MIMO USB Network Adapter Run Perfect, Audio Works , Realtek ALC1200 (AppleAzaliaAudio device id modificate)
Crosshair AM2	NVIDIA nFocre 590 SLI MCP55	Install Method: Zephroth AMD SSE3 9.2.0 Kernel BIOS Version: 0702; Revision: Unknown Audio: Works with AzailiaHD from install DVD LAN: Doesn't Work - OSX detects them with Forcedeth and they have MAC addresses however they will not detect Ethernet cables SATA & IDE: Both Work To avoid "Still Waiting for root device," have an IDE HD and optical drive plugged in and install on SATA Needs boot hang fix if using GUID - same as Asus A8N-E NFORCE4	EFI v8 Works	LAN doesn't work, Audio needs patching (reinstall AzailiaHD after 1st boot)
M2N-E	NVIDIA nForce 570 Ultra MCP	Install Method: LEO4ALL v3 10.5.2 AMD SSE3 9.2.2 Kernel . BIOS Version: 1202; Revision: Unknown. Audio: ADI 1988 HD Audio Device; works with Azalia driver installed from dvd. LAN: Not tested. SATA & IDE: SATA works with Nforce Test driver from dvd; IDE Not tested.	EFI Worked.	No, audio,sata needs patching,slow boot (aprox. 3-4 minutes) .
M2N-X	NVIDIA nForce 520 MCP	Install Method: Kalyway 10.5.2 AMD SSE3 Sleepykernel . BIOS Version: 0701; Revision: Unknown. Audio: MCP65 HDA, line out works perfectly with AppleHDA removed and device/vendor IDS added to AzaliaAudo kext LAN: Not tested. SATA & IDE: SATA works with Nforce MeDevil driver from dvd; IDE works perfectly.	EFI Worked.	No, audio,sata and AMD patch 1 used, but all required patches apart from audio already on disk.
M2N32-SLI Deluxe	Nforce 590 SLI MCP	Install Method: Leo4All-10.5.2 PPFv1 Universal AMD/INTELSSE2/SSE3 9.2.0 Kernel BIOS Version: 1802; Revision: Unknown Audio: ADI AD1988B SoundMAX, Azaila Driver From DVD LAN: Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0e (Integrated), RTL8187 Driver From DVD SATA & IDE: It Will Install On IDE or SATA Optical Drive: SATA LG DVD Burner \| Had to hook up IDE DVD-Rom to install (removed IDE Rom after install and everything works fine) AMD-Patch From DVD	EFI Worked	The integrated LAN does not work out of the box. (Did not try to fix this, because on board wireless worked with patches applied during install. No post-install patches applied.
M2N-E SLI	NVIDIA nForce 500 SLI MCP	Install Method: Zephyroth 10.5.2 AMD SSE3 9.2.0 Kernel BIOS Version: 0902; Revision: Unknown Audio: C-Media 6501 HD Audio Device; works out of the box, recognised as USB Audio Device LAN: Works with nForce 2/3/4/5 drivers selected in install options. SATA & IDE: SATA works (can do flat install to SATA HDD); IDE Works	EFI v8 Works	No, lan needs patching
M2N SLI Deluxe	NVIDIA nForce 570 SLI MCP	Install Method: Kalyway 10.5.2 AMD BIOS Version: 1604; Revision: Unknown Audio: SoundMAX ADI AD1988B; Stereo works have not tested surround, Not recognized LAN: Nvidia nForce 570 MCP built in dual Gigabit with Marvell PHY works with (nForceLAN.kext) SATA & IDE: SATA works (can do flat install to SATA HDD); IDE Works Despite being able to setup RAID before OS even starts up. It does not recognize the array.	EFI v8 Works	Video (PNY 7600GT 256mb) worked but for full support I had to download and install NVinject despite it being installed from DVD.
M2N-X Plus	NVIDIA nForce 430	Install Method: Leo4Allv3 10.5.2 Universal SSE2 SSE3 BIOS Version: Stock Audio: High Definition Audio Azalia (Installed Azalia Driver) LAN: Not tested. SATA & IDE: SATA Working fine without other packages. Not tested PATA. Optical Drive: LG H50N. Working w/o other packages Shutdown and restart worked, sleep not tested Was looping on the welcome screen (When comes after the backup screen, back to the welcome video). Resolved Typing -s at the Darwin boot prompt and following: $/sbin/mount -uw / $passwd root it will ask you to enter a new password $touch /var/db/.AppleSetupDone $reboot	EFI ran smooth, Installed 9.2.2 Kernel in a Seagate 160Gb SATA HDD Using MBR to Boot (As default)	Yes, but LAN (not tested yet)
A8N-SLI	NVIDIA nForce4 SLI	Install Method: Zephyroth 10.5.2 BIOS Version: 1604; Revision: Beta Audio: Realtek ALC850 (Selected AC'97 from Customize list) LAN: nForce4 built-in Gbit MAC (Selected forcedeth from Customize list) SATA & IDE: Installed OS onto IDE drive without problems. Also have two SATA drives in Striped RAID configured through MediaShield ROM, but the RAID showed up as two individual drives in Mac's Disk Utility during installation. Cannot access RAID even after installation. Optical Drive: BenQ DW1625. During the 15 odd times I booted from the DVD to install, after the first 6 or 7 times, the installer started saying that it could not read from the disc. This was happening when it normally would check the media for errors. So, I re-burned a new disc using the same drive of the same ISO(which I had initially created from the original (now problematic) disk). The new disc worked. Maybe, just a very fragile disc. But, weird. Shutdown and reboot works. Sleep gives a blank (black), unresponsive screen. Have to hard reset. Had to run the installation, with the same options, multiple times for it to get it right. After a few installs, I was getting the gray screen asking me to restart the computer. I really don't know how I got around that problem. I just installed again without changing any options. Finally, when it worked, I had my ethernet cable unplugged. In the Customize list, I had chosen the nforce chipset 2/3/4/5 kext, AC '97, forcedeth, nvidia geforce 10.5.2 and nvinject 128 MB for my 6600GT graphics card. Name of volume: Leopard. I chose the EFI v8 plus MBR bootloader to make the "Leopard" volume bootable. I'm using grub to choose between my various OSes. SSE3 9.2.0 TOH Kernel chosen from the Customize list. Can only install from same IDE cable (CD and HDD)	EFI: Since I installed using Zephyroth's 10.5.2, I'm assuming it installs EFI by default?	Yes, everything works without patching. No flags needed while booting.
A8N-E	nForce 4	Install Method: Leopard 10.5.2 Zephyroth AMD BIOS Version: Unknown; Revision: Unknown Audio: Install AC97 package on the install menu LAN: Install Forcedeth from the install menu SATA & IDE: IDE works; SATA not tested Install Boot Hang Fix: Boot with the DVD Press F8, then type "-s" Type "cd /usr/standalone/i386" Type "dd if=./guid/boot1h of=/dev/rdiskXsY bs=512 count=1" (X is the disk number and Y is the partition number on which you installed Leo) Type "dd if=./guid/boot0 of=/dev/diskX bs=400 count=1" Type "./startupfiletool -v /dev/diskXsY ./boot_v8"	EFI v8 Works	Audio & LAN need patching
A8N5X	NVIDIA nForce4	Install Method: Kalway 10.5.2 BIOS Version: 0902 Nvidia 6600 PCIe working with NVinject Chose patches: SSE2_Jas1048_ACPI_APIC, AMD_1052_Patch_test_1, and -legacy flag Startup welcome movie played with sound on first boot	EFI working	Everything but LAN is working
A8N-VM	NVIDIA nForce 410	Install Method: Zephyroth Leopard 10.5.2 for AMD BIOS Version: 0902; Revision: Unknown Audio: ADI AD1986A works with ALC888 patch and no input LAN: Works with Zephyroth patch in installation SATA & IDE: Works with Zephyroth patch in installation partitioned as MBR	EFI works	Audio & LAN need patching
M2NPV-VM	nForce430/GeForce 6150	LEO4ALL V2 KALYWAY & ZEPHYROTH Disable usb legacy support in bios to work with ps/2 mouse & keyboard Graphics working but no qe/ci (install macvidia or remove nvdaresman.kext) Audio Working with 2 channel output but no input Lan Working SATA Working link installation guide for all osx86		Everything working fine but no qe/ci
P5V-VM Ultra	VIA P4M890	Install Method: Kalyway 10.5.1, Combo Updater, & Kernel Patch BIOS Version: Unknown; Revision: Unknown Audio: Realtek High Definition Audio, ADI AD1986A Soundmax Codec LAN: Realtek RTL8201CL SATA & IDE: Unknown	Unknown	Audio needs patching
P5VD2-MX	VIA P4M890	Install Method: Kalyway 10.5.1, Combo Updater, & Kernel Patch BIOS Version: 1017; Revision: Unknown Audio: ADI1986A; works with Azalia LAN: Realtek RTL8201CL; works with viarhine.kext SATA & IDE: IDE works; SATA needs patching to appleviaata.kext and add 0x53371106 0x2363197B to the device ID Shutdown & Restart fully working, Sleep not tested	Unknown	No, audio & lan need patching
K8V SE Deluxe	VIA K8T800 (VT8237)	Install Method: Kalyway 10.5.2 (-x -v -legacy options) BIOS Version: 1001 ; Revision: Unknown Audio: ADI AD1980 SoundMAX (integrated) - does not work, used drivers for PCI Creative card LAN: Marvell Yukon 8E8001 (integrated) - works with m.musashi beta driver SATA & PATA: Works out of the box Optical: Rosewill 16X8 DVD DUAL working, Lite-On LTR-52327S CD-RW working Shutdown and reboot work, sleep unknown USB: Seen in system profiler, will not mount devices	Unknown	No, Audio, LAN, and USB need patching.
K8V-X	VIA K8T800 (VT8383)	Install Method: Kalyway 10.5.2 AMD > SSE2 BIOS Version: 1001.006 Audio: ADI AD1980 SoundMAX (integrated) - seems to work but problem with stereo output LAN: Marvell Yukon 88E8001 (integrated) - works fine with skge.kext (on Kalyway DVD at installation)	Untested	No, Audio not working 100%
K8V-XE	VIA K8T890	Install Method: Zephyroth 10.5.2 AMD > SSE3 9.2.0 kernel after Uphuck 10.4.9 1.4a drivers install (USB, Azalia, VIA Rhine) BIOS Version: 0703 Audio: Realtek ALC660 (integrated) - works with Uphuck Azalia patch (not Zephyroth patch) LAN: Realtek RTL8201CL-LF 10/100M (integrated) - works with Uphuck VIA Rhine driver IDE: VIA IDE controller (integrated) - works with Zephyroth VIA drivers SATA: JMicron JMB 363 SATA controller (integrated) - used as storage drive Video: NV 7300GT works with NVInstaller V41 Install Boot Hang Fix: Boot with the DVD Press F8, then type "-s" Type "cd /usr/standalone/i386" Type "dd if=./guid/boot1h of=/dev/rdiskXsY bs=512 count=1" (X is the disk number and Y is the partition number on which you installed Leo) Type "dd if=./guid/boot0 of=/dev/diskX bs=400 count=1" Type "./startupfiletool -v /dev/diskXsY ./boot_v8"	EFI MBR works	Audio & LAN need patching
M2A-VM	VIA SB600 / ATi 690g	LEO4ALL V3, default kernel in DVD installer - - On AMD 4600+ x2 CPU Motherboard BIOS version 1501 Audio, LAN, SATA 100% out of box SATA DVD install works out of box IDE DVD-RW (ATA) working with dcat's kext (search Insanelymac.com) nVidia Geforce 8600 GT 256mb (works fully with NVInject 0.2.0, using this method Had to switch SATA controller to AHCI in BIOS. Warning: Switch this back to IDE if you installed Windows XP on another drive. If you use PS/2 Keyboard and Mouse (instead of USB) disable USB legacy support in BIOS Setup.	N/A	Everything works 100%, the onboard ATi x1250 card works with Kalyway, probably with LEO4ALL as well.
M2A-VM HDMI	VIA SB600 / ATI 690G	Kalyway 10.5.2, Kernels installed: sleepkernel,speedstep - - On AMD 4200+ Athlon X2 CPU Motherboard M2A-VM HDMI - No BIOS updates done If you have old PS/2 mouse and keyboard - Disable USB Legacy support in BIOS LAN, SATA, IDE works 100% out of box IDE DVD install on a IDE primary HDD with a SATA secondary drive XFX nVidia Geforce 8500 GT 512mb (works like a dream with NVInject 512 selected during install) Viewsonic 19' DVI - able to get full native resolution [email protected] Had to switch SATA controller to AHCI in BIOS. Warning: Switch this back to IDE if you installed Windows XP on another drive. Install takes roughly 2 hours. Shutdown and Sleep are working.	EFI works, Vanilla not supported	Near perfect combo, Only audio needed patching (Simple installer file available in forum-search ALC882 patch)
M2S-X	SiS 756 Northbridge + SiS 965L Southbridge	Install Method: Kalyway 10.5.2 Intel/AMD BIOS Version: 0603 Audio: Works OOB no patch needed since onboard C-Media CM6501 8 ch audio is a USB PnP Audio Device detected as PnP Audio Device by the OS [9] LAN: SiS 190 10/100 Ethernet does not work, installed a cheap Realtek 8139 PCI LAN Card works OOB. IDE: OOB Full UDMA Speed SATA: Not yet tested USB: Has Issues need to connect USB Devices before turning on the system and can't eject a USB Flash Storage Device. Need to Disabled Legacy USB Devices in BIOS. Installed using IDE Drive	EFI Works no Vanilla Kernel	No
P5SD2-FM	SiS 649DX/SiS 966 chipset	Install Method: Flat Image, ToH Kernel, Kalyway 10.5.2 Combo Update BIOS Version:; Revision: Audio: Works LAN: Works SATA & IDE: SATA unknown, IDE works Optical Drive: NEC DVD_RW ND-4551A works Shutdown & Reboot works, Sleep not tested	Unknown	Yes
M2N68-AM	NVIDIA nForce 630a/Geforce 7025	Install Method: Kalyway 10.5.2 Audio NOT working Network NOT working SATA: Works: Set to AHCI in BIOS PATA: works USB: NOT working Setup a FAT32 partition on the hardisk to transfer files/drivers Update: kernel: voodoo 9.5.0 Audio working 2 channels with voodooHDA, trying for 5.1 enabling onboard nForce gigabit works with forceDeth USB got activated after installing Maxtor Onetouch Firewire drive package for Mac! dont know how. Added Asus 9600GSO PCIE x16 512MB card and works with NVEnabler but not with EFI strings or GFX strings from Osx86tools(BTW, must have tool)	None of the additional drivers have improved device supports on the onboard GPU.	Tips: OS X enhanced graphics QE / CI wont work with onboard GPUs. have a few OSx partitions on dedicated HDD and use CarbonCopy to create clones as you step thru each successful hack
M2N CM-DVI	NVIDIA nForce 630a/Geforce 7025 WORK NO FULL	Install Method: Kalyway 10.5.2 Audio working Network NOT TEST LAN SATA: Works: Set to AHCI in BIOS PATA: - USB: working, USB MODEM FULL WORKS	VIDEO: ATI RADEON 3650 256MB WORKS FULL
M3A78-EMH HDMI	AMD 780G/ATISB700	Install Method: Ideneb v1.3 10.5.5 Audio working with Azalia Kext NETWORK: working after switching on bios rom set with RealtekR1000 kext SATA: working with AHCI in bios PATA: not tested USB: working fully VIDEO: Working with nvinject Geforce 8600GT 512MB SHUTDOWN, RESTART: works with shutdown patch SLEEP: not tested Memory 4GB 4x1GB Kingston
P4V800-X	VIA PT800 / VIA VT8237	Install Method: Kalyway 10.5.2 BIOS Version: Unknown; Revision: Unknown Audio: ADI AD1980 AC'97 kext LAN: No work SATA & IDE: Unknown SHUTDOWN, RESTART: working fully SLEEP: not tested	Unknown	Audio needs patching

. . .

[edit] Biostar

Hardware Name	Chipset	Notes	EFI/Vanilla kernel working	Fully Working w/o Patch
Biostar P35D2-A7	Intel P35 + ICH9	Installation: SATA HD fresh formatted with MBR using Disc Utility Install method: Kalyway 10.5.1; vanilla kernel (both pkgs) from SATA DVD Updated to 10.5.2 using the Kalyway 10.5.2 & Kalyway Kernel updates Onboard LAN works out of the box Audio works with Linux audio codec ALC662 + HDA Patcher.	EFI v8 + Vanilla kernel	No; Audio needs patching
Biostar 945GC-M7 TE	945GC	Installation: SATA HD fresh formatted with MBR using Disc Utility Install method: Leo4Allv2 Onboard LAN does not work out of the box Audio does not work out of the box Video GMA950 works out the box without patch (if patched hardware acceleration works but resolutions is stuck)	Patched Kernel 9.0.0; also Vanilla Kernel	No, audio and lan both need patching
Biostar NF61S	nVIDIA MCP61S(GeForce 6100/nForce 405)	Install Method: Zephyroth AMD 10.5.2 Rev.1 BIOS Version:; Revision: Audio: Unknown LAN: Unknown SATA & IDE: Unknown Optical Drive: NEC 7191S SATA setup as IDE with IDE-SATA bidirect converter adapter (otherwise still waiting for root device message)	Unknown	Unknown
Biostar P4M80-M4	VIA P4M800	Installation: IDE HD fresh formatted with GUID using Disc Utility Installation method: Kalyway 10.5.2 Onboard LAN needs Rhine kext NVidia GeForce 6200 needs Titan kext	Patched Kernel	LAN and GeForce patchs
Biostar P4M890-M7-SE	VIA P4M890 Northbridge / VT8237A Southbridge	Installation: WD 320GB IDE HD fresh formatted w/2 partitions with GUID using Disc Utility Installation method: Kalyway 10.5.2 Intel Core2Duo E4300 OC'd to 2.4 GHz/Recognized as Core2Duo 2.4 GHz Onboard IDE works OOB SATA Not working - Doesn't see my SATA drive with Vista installed All USB ports (front & Rear) working / Mounts my external USB Hard Drive Full Burn support in all iApps with Pioneer DVD-RW (seen as Apple Supplied) Time Machine fully operational w/WD 80GB IDE drive Onboard LAN needs Rhine kext Onboard Audio needs AzaliaAudio.kext - 2-channel Audio but good 'nuff NVidia GeForce 8500GT needs Nvinject kext - Have QE/CI and all resolutions/Refresh Rates & DVI Shutdown / Restart / Sleep fully functional Been fully operational for a week now w/o a single hiccup	Vanilla Kernel	LAN, Audio and GeForce patchs
Biostar 945GC Micro 775	945GC	Install Method: iATKOS 2.0i Intel Core 2 Duo E2140 1.6GHz @ 1.84GHz (OC'd) Audio: Realtek ALC862 (working OOB) LAN: Realtek RTL8139 (working OOB) SATA working, IDE not tested Hitachi Deskstar 160GB SATA-II (Mac) & WD 250GB SATA-II (Vista) Shutdown & Reebot works - not waking after sleep USB Ports are working Stable as a rock	EFI + Vanilla	8500GT - Used NVInject 0.2.0
Biostar P4M800-M7	VIA P4M800 Northbridge / VT8237 Southbridge	Installation: WD 80GB IDE Installation method: leo4allv3 Intel Pentium IV 2,8 Ghz Onboard IDE works SATA Not tested USB ports (front & Rear) working LG DVD-RW Onboard LAN needs Rhine kext Onboard Audio needs patch (AC97)- in/out works NVidia GeForce 4mx 440 64mb AGP8x needs patch (Natit 1,0 installer) - No QE/ Software CI Samsung SyncMaster 206NW - full supported	No vanilla kernel	LAN, Audio and GeForce patchs
Biostar P4M800 Pro-M7	VIA P4M800 Pro Northbridge / VT8237R Plus Southbridge	Installation method: Kalyway 10.5.2 Intel Celeron D 336 Onboard IDE Not Tested SATA Working USB ports (front & Rear) working SATA DVD-RW Onboard LAN Works Out of The Box (Realtek RTL8201 Chip) Onboard Audio (ALC655) works but in MONO mode. Solution here. Onboard VGA Works (VIA S3 Unichrome) but doesn't support Quartz Extreme. Only Allows 1024 X 768 as screen resolution. Follow this thread to change the resolution.	No vanilla kernel	Audio patch
Biostar TF7025-M2	Chipset (NVIDIA 7025 and Unknown)	Install Method: SpeedStepKernel + Kalyway Audio: Nvidia AC'97 on Kalyway DVD Onboard LAN needs R1000.kext Some revisions of board use Nvidia MCP67 LAN, not Realtek. Working using forcedeth-nockd.kext with deviceID 054c10de manually added to the info.plist SATA: AHCI mode works for hard drives and DVD drives PATA: Optical drive works, but hard drives larger than 128 GB do not Optical Drive: NEC Optiarc DVD Burner Shutdown and restart works. Sleep works, but causes weird problems with X1950 Pro video card. Onboard video does not work	No vanilla kernel	LAN, Audio Patches, Use USB fix 1.3.mpkg to fix usb hotplug support
Biostar TForce 945P	Intel 945P + ICH7	Installation: SATA DVD, PATA HD Install method: iAtkos 2.0i, vanilla kernel Onboard LAN (RTL 8110SC) works out of the box Audio (ALC655) Fixed with a plist edit.	EFI v8 + Vanilla kernel	No; Audio needs patching
Biostar GF8100 M2+ SE	NForce 720a (AMD board)	Installation: SATA HD (MUST use AHCI mode or Disk Utility won't see drives) Install method: Kalyway 10.5.2, AMD patches and kernel Onboard LAN: Realtek 8201CL -- add 0x076010de to Nforce kext Audio: ALC662, says it's AzaliaAudio in BIOS but does not work Video: Onboard GeForce 8100 shared memory does not work	Patched Kernel	No, LAN needs patch, for video and audio you will need supported PCIe/PCI cards
TA690G AM2	AMD 690G	Install: Zephyroth Leopard 10.5.2 for AMD EFI BIOS Version: R69AMC13		Audio needs patching

[edit] DFI

Hardware Name	Chipset	Notes	EFI/Vanilla kernel working	Fully Working w/o Patch
DFI X38 LT	Intel X38	Install Method:: Quad boot portion: Installed XP Pro SP2 first (using acronis to hide other 3 partitions) than Vista (same hiding method) than osx86 than ubuntu with Grub. OSX86 Method: Kalyway 10.5.1 + Patched Kalyway Update 10.5.2 + Patched Kalyway Kernel 10.5.2 + Graphic Update BIOS Version: 1/11/08 Audio: Works with AppleHD patch and AC885 kext (2.1 and digital and input) Video: 8800GT works with Graphic update + nv... latest (google 8800gt osx86 download) LAN: Had to install off gigabyte p35 cd and edit for 8052 in the info.plist file SATA Support works with AHCI IDE Suppport works RAID w/ Areca 1210 Working (RAID 0)	Yes. Fully supported EFI v8 + with Vanilla kernel
LanParty NF4 Ultra-D	nVidia nForce4 Ultra/SLI Chipset	Install method: Zephyroth 10.5.2 Installation: IDE HD formatted with MBR using Disc Utility BIOS version: 2006/04/06 IDE: Works out of the box SATA: Select Nforce 2/3/4/5 chipset driver in install LAN: Select LAN drivers in install (Both Nforce & Marvell) Audio: Select ac'97 audio driver in install Total install time: 14 min	EFI v8 + ToH 9.2.0 SSE3 kernel	Yes, as long as you select the appropriate drivers in the installer
LAN PARTY ULTRA-D nForce4	nForce 4	Install Method: Zephyroth 10.5.2 V1 for AMD & 9.1.0 Kernel BIOS Version: Unknown; Revision: Unknown Audio: ALC 850 works OOB LAN: Onboard nForce 4 works OOB SATA & IDE: Both work Optical Drive: LG GSA-H22N BK works Optical Drive 2: NEC 2510A works Shutdown & Restart works, sleep untested Socket 939	EFI works	Yes
LANPARTY UT CFX3200-DR/G Socket 939	ATI 580X + ULi 1575	Install Method: Kalyway 10.5.2 (need to edit AppleVIAATA.kext and add device values). Updated to 10.5.5 with ASU BIOS Version: Audio: ALC 882 works OOB (Selected P5WDH in Installer, use HDAEnabler.kext to get info in system profiler). USB: All ports working OOB. Firewire: Works OOB. LAN: Marvell 88E8053 Onboard Lan working OOB. LAN: Marvell 88E8052 Onboard Lan working after adding values to yukon2.kext. SATA & IDE: SATA and IDE both working with edited AppleVIAATA.kext Optical Drive: Working IDE Shutdown Works, Restart and Sleep don't.	EFI works, using 9.5.0 VoodooXNU RC Kernel.	Fully Working, but need to manually edit AppleVIAATA.kext on kalyway 10.5.2 install disk.

[edit] ECS

Hardware Name	Chipset	Notes	EFI/Vanilla kernel working	Fully Working w/o Patch
P4M800PRO-M (V1.0A)	VIA P4M800PRO + VIA VT8237R Plus	Install Method: Kalyway 10.5.2 with "sleep" kernel BIOS: Unknown (will update later) but I did not have to mess around with any settings to make it work. Audio: Realtek ALC655, only works on left channel out of the box. Use kext file from [10] and everything works great! Graphics: integrated video not tested; using AGP card (128MB Geforce 6600GT) with NVInject 128 which is working great. LAN: VIA VT6103L, does not work out of box. Attempted to install VIA Rhine driver, and adapter was recognized....but always got a kernel panic immediately after I tried to setup the adapter! Using a Realtek PCI network adapter instead, works great. I'm just a bit lazy, I am sure there's a way to get the integrated network to work if you really want to. SATA & IDE: Both work excellent out of the box!	not sure?	No, audio and network need to be patched.
P4M800PRO-M V2	Via P4M800PRO, Via 8237R Plus	Install Method: Use Kalyway 10.5.1 Intel Amd DVD. Use 10.5.6 combo update with netkas method. Netkas method works but you MUST enable root user in directory utility and type "sudo su" in terminal first before running the netkas script. Make sure you have voodoo kernel 9.5 installed BEFORE YOU REBOOT. If you have an nvidia card remove all ati, appleintelgma video kexts before reboot. IDeneb 10.5.5 also works but do not install any video drivers. BIOS: 5/25/2007 Audio: AC97 stereo fully working with patch, otherwise mono OOB. Graphics: Onboard video unknown. Used Geforce 6200 128mb AGP and 7600gs 512 AGP. QE CI supported with NVinject. LAN: Works with viarhine.kext, but has dropouts and you have to restart. Use wireless USB adapter. Even Fully supported PCI LAN cards Tends to drop out just like the on board, many people are having this problem just with this particular chipset no just the motherboard. Tried many things to get this to work but have not had success, some bios tweaks make it last longer but it still dies from heavy usage. SATA & IDE: IDE works, SATA works. USB Works. Time Machine works with toh ionetworkingfamily.kext.	Vanilla kernels do not work because of via chipset. Installed using MBR. GUID works too on my IDE drive. Dual boots with XP.	You might have to slightly increase voltage on your memory with this board. I could not install Kalyway 10.5.2 DVD at first and got an error "Could not validate Base Install". After upping my memory voltage by .20 it worked fine. Depends on memory probably. LAN dropouts even using a PCI Supported NIC.
G31T-M	Intel G31 + ICH7	Install Method: Leo4All_v3 (no other worked) BIOS Version: Unknown Audio: ALC662 (Only AzaliaOut), HDA-Patcher w/ ALC662.txt didn't work LAN: not tested SATA & IDE: no problems occured Optical Drive: positively tested with SATA & PATA drives Shutdown, reboot work OnboardGFX not tested Only worked with whether cpus=1 or ACPI disabled. Only one core recognized by OSX NOT RECOMMENDED UPDATE BY SEARAY: YOU CAN USE THIS BOARD WELL IF YOU APPLY BIOS PATCH. SEE 10.5.5 HCL for the fix. It works in 10.5.2 and 10.5.6	Yes	No, Sound needs Patching
GCT-M/1333 (V3.0)	Intel 945GC + ICH7	Install Method: EFI_V8 + Retail DVD imaged to USB drive + patched. Updated to 10.5.2. BIOS: 07/11/07 (08/02/18 does not boot) Audio: IDT 92HD202: Not working yet. Graphics: 945G/P (GMA950): Working, no tearing / artifacts. LAN: RTL8101E: Works Native SATA & IDE: IDE works, SATA works. No optical drives tested.	Yes	Not tested
GCT-M/1333 (V3.0)	Intel 945GC + ICH7	Install Method: Kalyway 10.5.2, Vanilla BIOS: 07/11/07, must have Execute Disable Bit ENABLED Audio: Unknown for onboard, Using USB audio instead LAN: Works SATA & IDE: Works with either or both, including IDE Pioneer DVR-112D optical drive Graphics: Artifacts from onboard. Installed XFX8400GS PCIe with Kalyway NVInject option. Modified NVCAP for DVI. Shutdown, reboot work. Sleep does not. Cheap $20 Firewire and $20 AirLink Wireless N PCI cards work well. 2.67GHz Core 2 Duo E6750 Previous installs with Kalyway 10.5.1 were difficult. Kalyway 10.5.2 seems much easier for this mb.	Yes	Not tested
GCT-M/1333 (V3.0)	Intel 945GC + ICH7	Install Method: Kalyway 10.5.2, no options selected BIOS: 07/11/07, Execute Disable Bit ENABLED Audio: No, IDT 92HD202 HD Audio, previously Sigmatel 9200?, does not work in SLES 10 or Ubuntu 8.04 either LAN: Realtek 8101E, works natively SATA & IDE: IDE Maxtor HD and Emprex DVD 16x burner work, SATA not tested Graphics: Intel GMA 950, only 1024x768, no artifacts USB 2GB Jump drive works Shutdown, reboot work. Sleep does not. 2.2 GHz Core 2 Duo E2200, Crucial 2GB 800Mhz (detected as 667Mhz) PC6400 CL6	Yes	Yes except Audio
K8M890M-M (V1.0A)	K8M890 + 237R	Install Method: Zephyroth AMD 10.5.2, AC97, Via Rhine, MBR Bootloader options selected BIOS: 9/12/2007, American Megatrends Audio: AC97, works LAN: VIA Rhine, works with install option checked WLAN: Linksys WUSB54G, USB works with prasys drivers SATA & IDE: IDE Maxtor 34GB (works), SATA WD 160GB (works), IDELGDVDRW (not fully tested) Graphics: Sapphire X1650 Pro PCIe, no artifacts (sometimes multiple res & qe/ci when hacked. trouble.) Graphics: Onboard IGP S3, does not work. Shutdown, reboot work. Does not sleep. 2.2 GHz AMD Athlon 64 X2 AM2, Crucial 2GB 800Mhz (detected as 667Mhz) PC6400	Yes	Yes, except onboard graphics and added vg/wlan cards.

[edit] Elitegroup

Hardware Name	Chipset	Notes	EFI/Vanilla kernel working	Fully Working w/o Patch
945gct-m v 3.0	Intel 945GC + ICH7	Install Method: Kalyway 10.5.2 intel amd sse2 sse3 BIOS: latest Audio: No, Motu Ultralite used instead. LAN: works oob, SMB works thank god SATA & IDE: both work oob Graphics: e-vga nvidea 7300gs 256 mb ddr2, works with /movevideodrivers trick, crashes when 'detect displays'. all resolutions work, multiple displays not yet tested. USB 2.0 works Belkin firewire pci card works oob Shutdown, reboot work. VERY Slow comes with 512mb of patients 3.07 P4 w/ HT, Crucial 2GB 800Mhz (detected as 667Mhz) FSB running at 533 xbench score @ 99, with dashboard killed. Logic pro and Final Cut Express 4.0 work	Yes	Yes except Audio

[edit] eVGA

Hardware Name	Chipset	Notes	EFI/Vanilla kernel working	Fully Working w/o Patch
eVGA 780i SLI132-CK-NF78-A1	nVidia nForce 780i SLI Chipset	Install method: Kalyway 10.5.2 Installation: SATA HD w/ GUID BIOS version: P06 PATA: works (PATA optical disk work during installation) SATA: all ports work but unstable when writing/reading medium size files LAN: not working (beta driver work but unstable) Audio: ALC888S (works with ALC888 driver)	EFI v8 + 9.2 sleep kernel	No, sleep/shut down not working properly, system randomly freeze under idle/load
eVGA 680i SLI122-CK-NF68-A1	nVidia nForce 680i SLI Chipset	Install method: Kalyway 10.5.1 + Kalyway 10.5.2 combo update + Apple Graphics update 1.0 Installation: IDE HD w/ GUID BIOS version: P32 IDE: Works out of the box SATA: read works/no write: nForce driver in the works LAN: Marvell 88E1116, beta driver works after unplugging computer. To stop freezing: set cpus=1 Audio: Fully working w/ ALC885 codec using Taruga's HDApatcher v1.20	EFI v8 + modbin 9.2	No, patch audio, use PCI Nic for stability, screen saver/restart/shutdown perfect, sleep no good
eVGA NF41SLI133-K8-NF41-AX	nVidia nForce4 SLI Chipset	Install method: Kalyway 10.5.2 Installation: IDE HD w/ GUID BIOS version: unknown IDE: Works out of the box SATA: read works/write LAN: OOB Audio: Fully working OOB	EFI v8 + sleepkernel	Yes, screen saver/restart/shutdown perfect, sleep no good

.

eVGA 680i SLI LT Nforce

Install method: Kalyway 10.5.2
Installation: SATA disc and hd
Bios is most recent as of Dec 2008
Sata works perfectly, havent tested loads yet.
Lan: Works with nforce patch but freezes under load even with different card installed. I believe it is a kernel issue. Ideneb 10.5.6 seems to fix it but not completely sure.
Audio works using azalia, hadnt tried patching using ALC880

Nforce kernel. Sleep broken

[edit] Foxconn

Hardware Name (alphabetical)	Chipset	Notes	EFI/Vanilla kernel working	Fully Working w/o Patch
A76ML-K	ATI Radeon HD3000 series	IDE: Works SATA: No Install Method: iPC OSX8x 10.5.6 INTEL/AMD SSE2/SSE3 Universal No audio for on board (VIA VT17088). Kernel Panic on installer exit, restart, shutdown, Sleep not yet tested. You MUST disable SATA before installing as it will goto "waiting for root device" error, enable after install is fine.
MB6497-RS	SiS964	Install Method: Leo4All v4 Beta (10.5.2) Audio: Realtek AC97 ALC655 (Works with this driver) Lan: Realtek RTL8201BL (SiS900 chipset, works with this driver) IDE: Not Tested SATA: Works Shutdown/Sleep: Works USB2.0: sometimes errors	Vanila not tested	No
P9657AB-8EKRS2H	Intel 965 Express	Install Method Retail DVD + Aple 10.5.2 Combo Update Audio Intel ICH8R ( Works with drivers from Kalyway 10.5.1 DVD ) Lan Works W/ Vanilla Kext IDE ( Not Tested ) SATA Works in AHCI Mode Shutdown / Sleep ( Sometimes it will shutdown without issue, other times it may hang for a bit before shutting down ) Overall Usability ( High )	EFI V8 GUID/MBR + Vanilla Kernel	No
P9657AB-8EKRS2H	Intel 965 Express	Install Method Patched Leo4All 10.5.2 Audio - not tested Lan Works out of box Firewire works out of box IDE (jmicron) Works fine after patching DVD SATA Works in AHCI Mode Shutdown / Sleep No problems shutting down, have not tested sleep Overall Usability ( High )	Leo4All + Vanilla Kernel	No
M7PMX-S	Intel nForce 630i Chipset	Install Method: Kalyway 10.5.2 with Sleep Kernel Integrated Video only works with one resolution with NVInject basic drivers (1024x768) On-Board HDMI untested, although shows multi-monitor support but only one monitor is connected. Audio - not working, needs ALC888 Patch Lan does not work. Needs patcher or compatible card IDE Works perfect SATA untested Shutdown / Restart / Sleep No problems shutting down or restarting, sleep doesn't work Needs to boot into Single User Mode after install to bypass Setup screen as it crashes on transfer screen. Overall Usability ( High )	EFI V8 + Sleep Kernel Vanilla Kernel not working(infinite reboot loop)	No, Needs Audio & LAN Patches. Otherwise fully compatible
C51XEM2AA-8EKRS2H	NVIDIA nForce 590 SLI	Install Method: Zephyroth 10.5.2 rev.1 Video: GeForce 8800GTS 640MB works with nvinject Audio: ALC882D, not working LAN: Marvell 88E1121 Dual 10/100/1000 Base T Enthernet PHY, not working IDE: Works SATA: Does not work Shutdown / Restart / Sleep: No problems shutting down or restarting, sleep is untested Overall Usability ( Mediocre )	EFI/Vanilla not tested	No, needs patches for Audio, LAN and SATA.
P45A-S	Intel P45 Chipset	Will not install. Won't recognize Firewire port and stops installing there. Turning off the Firewire port doesn't work, simply causes more errors.	N/A	No, not at all.

.

[edit] Gigabyte

Hardware Name (alphabetical)	Chipset	Notes	EFI/Vanilla kernel working	Fully Working w/o Patch
GA-EP45-DS3	Intel P45 ICH10	Note from someone else: I found this entry to be misleading about the audio chipset. Use the next one. You only need the two kexts from Taruga: HDAEnabler.kext, and ALC888 Address 2 AppleHDA.kext. You don't have to deal with any Linux dump. Putting the kexts in the EFI partition did not work since they had dependencies in the original kexts. DSDT patch & ChameleonSM for pure vanilla setup. Install Method: Chameleon + Retail Method - SATA AHCI Mode Bios revision F8 (current) All 6 SATA detected as Generic AHCI - Need to add Device ID to AppleAHCI for correct detection (3a228086) JMicron JMB368 IDE: Detected not tested yet. (197b2368) Dual Gigabit OOB (10ec8168 rev 02) Firewire OOB (Texas Instrument TSB43AB23 (104c8024) All USB OOB Audio: ALC885 (3a3e8086 rev 02)Internal/Microphone working with this guide Used with Quad Xeon X3320 Shutdown/Restart: Psystar OpenHaltRestart	ChamelelonEFI + Vanilla Kernel	No - Audio need to patch.. New DSDT Method :- run the DSDT Patcher with -newHPET from terminal, edit the dsdt_fixed.txt in Debug Folder (search and replace 'AZAL' with 'HDEF') recompile the dsdt-fixed.txt (iasl dsdt_fixed.txt), copy the dsdt.aml to / - copy the chameleonsm (cp chameleonsm /boot). Before reboot remove/backup all patched kext files, run "kextcache -a i386 -m /Extra/Extensions.mkext /System/Library/Extensions/". Now you can safely reboot.. A simple sed for changing AZAL to HDEF -> sed -i 's/AZAL/HDEF/' yourfile . Then you can run -> grep HDEF yourfile" - to see if the changes are made.
GA-EP45-DS3L	Intel P45 ICH10	Install Method: KALYWAY and IATKOS 10.5.2 works perfectly (need to set to AHCI in BIOS and install in first partition of drive). RECOMMENDED METHOD: Also works perfectly with RETAIL DVD or existing Leopard volume using Chameleon install method combined with LS8 patch pack (see links below). Audio: Works perfectly with linux audio codec dump (see linked file) and Taruga's 3 files HDApatcher, HDAEnabler.kext, and ALC888 Address 2 AppleHDA.kext (to have full bass use AppleHDA.kext that is modded using limini's method) LAN: onboard works only with SMB, AFS, and bonjour not reliable, use the card mentioned here All 6 SATA AND 2 IDE Ports work perfectly OOB, including both kinds of SATA/IDE hard drives and optical drives. Need to set ACHI setting in BIOS before install. USB2 Ports work perfectly. ICH10 working OOB WORKS OOB: Shutdown, Sleep and Reboot. Retail install needs patch here Core 2 Duo 3Ghz E8400 processor working perfectly, add-on Bytecc Firewire card working OOB. Palit NVidia 8600 card working perfectly. Running Leopard 10.5.5 Great overclocking board. Overclocked at 3.6Ghz with stock Intel cooler. Overclocked at 3.87Ghz with add-on Scythe Shuriken CPU cooler. XBench score of 216. 1720 Mhz Front-Side Bus. 30% faster than the iMac 3.06Ghz Extreme, even for the graphics surprisingly! The overclocked front-side bus elimanates most of the system bottlenecks. 30 successful installations reported for this new Gigabyte motherboard. Comment by one user (most don't have this problem): I had to perform entire installation process with only 1 piece of RAM. I wasted several hours dealing with incredible slowness before I figured this out. for more info visit: RETAIL DVD with 10.5.5 &10.5.6 install with all kexts and audio downloads for this exact board Method for RETAIL DVD install or existing authentic Leopard volume Bios Settings, and other installation info LS8 patch pack. Additional fine-tuning patches for after Kalyway and Retail DVD installs - For Gigabyte motherboards Troubleshooting discussion thread for installing on this motherboard + CODEC DUMP FILE Troubleshooting discussion thread for post-installation problems on this motherboard AppleHDA.kext that is modded using limini's method for full bass Kext Installer Application for Taruga and other patches	YES: ChameleonEFI or KalywayEFI, + Vanilla kernel	No. Need to install Audio patch. Very easy to do. Use also LS8v12 kext patch installer for this board for optimal performance. If installing 10.5.5 Leopard update, you must install 10.5.4 first along with LS8 patch pack before the 10.5.5 update. Avoid NVinject kext since it may not be compatible with all NVidia graphic boards (NVinject may cause bootup crash), use the proven LS8 pack instead.
GA-EP45-DQ6	Intel P45 ICH10	Install Method: You can use the same LS8_install_pack as for the P35-DS4 Audio: ALC889A works (In/Out/Mic/SPDIF) with patch AppleHDA.kext LAN: all 4 LAN work w/ vanilla kext, need RTL1000.kext for AFP/Bonjour Purple SATA port (gigabyte SATA) Works w/ vanilla AppleAHCI.kext Orange SATA port (ICH10) will need a patch IOATAFamily.kext Raid on ICH10 working with ChameleonEFI IDE Works WORKS: Shutdown, Sleep and Reboot for more info visit: GA-EP45-DQ6 Thread LS8 Install Pack Thread karaakeha's RAID guide	ChameleonEFI + Vanilla kernel	No
GA-EP45-DS4P	Intel P45 ICH10	Install Method: Kalyway 10.5.2. Upgrade to Kalyway 10.5.3. Used Software update to go to 10.5.4 Audio: ALC889A works (In/Out/Mic/SPDIF) with Taruga's new AppleHDA enabler and HDAudio.kext LAN: the two LAN work w/ vanilla kext. Have not tried apple talk, etc. SATA port (ICH10) works out of the box. Have one HD connected to one of the controllers and a BluRay/DVD/CD connected to the other. Raid on ICH10 working with ChameleonEFI IDE Works Shutdown, Sleep and Reboot don't work. Used this [11] to fix power off only. for more help you can sop by at: GA-EP45-DQ6 Thread	PC_EFI version 8 + Vanilla kernel	No
GA-EP45-UD3P	Intel P45 ICH10	Stub will update with more info, but working 100% Install Method: Kalyway 10.5.2 -> 10.5.5 Retail Audio: ALC889A	ChameleonEFI + Vanilla kernel	No. Audio needs patching.
GA-X38-DS5	Intel X38	Install Method: Retail DVD + Apple 10.5.2 Combo update (dsmos.kext only needed to boot it) BIOS Version: F6 Audio: ALC889A works (In/Out/Mic/SPDIF) with patch AppleHDA.kext (will break shutdown), using AppleHDA.kext w/ fix shutdown breaks Mic input LAN: Works w/ vanilla kext Purple SATA port (gigabyte SATA) Works w/ vanilla AppleAHCI.kext Orange SATA port (ICH9) will need a patch IOATAFamily.kext IDE Works WORKS: Shutdown, Sleep and Reboot (Not working on Vanilla kernel)	EFI V8 GUID/MBR + Vanilla kernel	No
X38-DQ6	Intel X38	Install Method: Kalyway 10.5.1 & Kalyway Combo Update BIOS Version: 3.70; Revision: 1.0 Audio: ALC889A works with patch LAN: Works OOB SATA & IDE: SATA & IDE work OOB Optical Drive: Samsung on SATA works	Unknown	No, audio needs patching
EX38-DS4 (rev 1.1)	Intel x38	Install "leoallv2 version" 10.5.2 all ok (ethernet realtek works fine, audio works fine with alc 889)
EX38-DS4	Intel x38 with ICH9R	Install Method: Kalyway 10.5.1 & Kalyway Combo 10.5.2 Update using PCWIZ's Tutorial and Additional Installers Audio: ALC889A Works 100% with PCWIZ's patch (applied twice, first time didn't take.) Ethernet: Works 100% SATA: All 6 ports work @ 3.0 Gigabit USB: 2 ports reported as High-Speed 2.0; 6 ports reported as USB 1.0 (Have not pursued a fix at this time) Optical Drive: SATA LITE-ON DVDRW LH-20A1L Works 100% IDE: Not tested. Shutdown, Sleep and Reboot: Works Video Card: EVGA 8800GT 512 MB patched with Scott Dangel's NVinstaller v.41 Installed AFTER Kalyway Combo 10.5.2 Update. Works 100% (Core Image, Quartz Extreme and Rotation All supported) Ram: 8 Gigs of 4 x 2GB G.Skill DDR-1000 PC2-8000 F2-8000CL5D-4GBPQ All Recognized and Works 100% Yeah Baby!!! Processor: Intel Quad Core Q6700 @ 2.67GHz	Yes. Fully supported EFI v8 + Vanilla kernel	No. PCWIZ's Addtional installer needed and Scott Dangel's NVinstaller v.41 needed.
GA-EP35-DS3R v2.1	Intel P35	Install Method: Kalyway + Apple Update 10.5.2 + Adobe Graphic Update BIOS Version: F2 Audio: Works with AppleHD patch (2.1 and digital) LAN: Works out of the box SATA works in AHCI mode (NCQ working)	Yes. Fully supported EFI v8 + Vanilla kernel	No. Audio need patch.
GA-EP35-DS3 v2.1	Intel P35 (ICH9)	Install Method: IATKOS 1.0r2 + Apple Update 10.5.2 but direct update from 10.5.1->10.5.3 BIOS Version: F2 Audio: Works with AppleHD patch LAN: Works out of the box SATA works, but detect only 2 drives, need patches to see all SATA drives.	Yes. Fully supported EFI v8 + Vanilla kernel	No. Audio need patch.
GA-EP35-DS3R	Intel P35 & ICH8	Install Method: iATKOS v1.0i, Brazilmac had problems with Rosetta apps BIOS Version: F12; Revision: 3.3 Audio: Audio888 installer package from Skippyretard and AppleHDA patcher v1.20 LAN: No, edit 8053 to 8056 and 62 to 64 in the Apple Yukon2 kext SATA & IDE: Only 2 SATA ports work	Unknown	No, Audio & LAN need patches
GA-EP35-DS4 Rev. 2.1	Intel P35	Install Method: Leo4All v2 BIOS Version: F12<? conformation please Audio: OOB - Used 889 (says DS3R) LAN: OOB - Realtek SATA & IDE: OOB, ICH9 - AHCI, J - IDE (else no DVD boot) Firewire: OOB Bluetooth: USB dongle working Sleep: OOB	Yes (Vanilla 9.2.2)	Yes. I used MBR, and does dual-boot XP.
GA-EP35-DS4 Rev. 2.1	Intel P35	Install Method: Retail DVD and Patched kext's BIOS Version: F2 or F3 Audio: Works with patched AppleHDA.kext LAN: Works out of the box SATA & IDE: SATA works OOB, IDE with Patch Install Guide by Coadey Install Guide by Karaakeha1 Install Guide by LTL	Yes (9.2.2)	No. Audio patch needed.
GA-EP35-DS4	Intel P35	Install Method: Kalyway 10.5.2 BIOS Version: F2 Audio: OOB LAN: OOB SATA & IDE: normal SATA works OOB, but not with software RAID0/1 (may have been my disks however). IDE untested. Note: Thanks to all those with GA-P35 and EP35 boards who posted here! Bought board for compatibility - was not disappointed.	Yes (9.2.2)	Yes.
EP35-DS4	Intel P35	Install Method: Retail DVD (See Below) & Netkas to 10.5.2 BIOS Version: F1; Revision: 1.0 Audio: ALC885 works with AppleHDA Patcher LAN: Works OOB SATA & IDE: Both work OOB Install Guide by ls8	EFI v8 Works	No. Audio patch needed.
GA-G33M-S2	Intel G33	Install Method: Kalyway 10.5.2 on IDE disk, works out of the box Video: Onboard Video Chipset Intel GMA 3100 works out of the box at 1024*768 LAN: Onboard Realtek RTL8111B Works out of the box, DHCP works OK USB: works OK Audio: Onboard Realtek ALC889A not tested		No. Video patch needed
GA-M57SLI-S4	nVIDIA® nForce 570-SLI	Metodo de instalacin LEO4ALLv3 opciones seleccionadas: Netkas 9.2.0 Sleep ACPIPlataform sin seleccionar ninguna SMBIOS - DDR800 Audio - ALC 888 NVInject - 256 MB v 0.2.1 (Trabaja lo basico con el NVidia Universal Installer.mpkg.zip funciona perfecto la tarjeta de video) ForceDeth no funciona la tarjeta de red solo la detecta y detecta un modem (no se de donde jj) Nforce Test. Tiene 4 GB de RAM pero al instalar se congela a 3 minutos de acabar hay que remover 2 Gb e intalar si se agrega despues no causa problemas (hasta ahorita). DVD SATA Disco IDE 500Gb LAN Marvell 88E1116 phy (10/100/1000 Mbit) CPU AthlonTM 64 X2 4800 Dual-Core Audio: Onboard Realtek ALC888 CODEC chip Onboard T.I. TSB43AB23 chip Video Nvidia Geforce 8600GT	unknow	No, Video y LAN necesita parche
GA-M61PM-S2 Rev. 2.0	NVidia nForce430	Install Method: Zephyroth AMD Rev.1.4033109 BIOS Version: F3 or F9c Audio: Works with patched AppleHDA.kext LAN: Not working Video: Not tested. Using GeForce 8600GT (PCI-e) SATA & IDE: SATA works OOB.	Unkown	Needs DVD to boot.
GA-M61SME-S2	NVidia nForce 6100/415	Install Method: kaly AMD BIOS Version: F9 Audio: Works with patched AppleHDA.kext LAN: Not working Video: No QE/CI Using GeForce 8600GT (PCI-e) SATA & IDE: SATA works OOB.
GA-M61P-S3 Rev. 1.0	NVidia nForce430	Install Method: Leo4Allv3 Audio: Works using ALC883.kext LAN: Not working Video: Integrated GeForce 6100 (No QE/CI) SATA & IDE: SATA works OOB.	Vanilla 9.2.0 kernel works great	Still working on LAN Drivers. nForce drivers don't work
GA-P35-DS3	Intel P35	Install Method: Kalyway 10.5.1 + Patched Kalyway Update 10.5.2 + Patched Kalyway Kernel 10.5.2 + Graphic Update BIOS Version: F12 Audio: Works with AppleHD patch (2.1 and digital and input) LAN: Works out of the box SATA Support works without AHCI IDE Suppport works	Yes. Fully supported EFI v8 + without Vanilla kernel	No. Audio needs patch. Bonjour and UPNP services like Connect 360 do not work OOB. Shutdown does not work with vanilla kernel.
GA-P35-DS3	Intel P35	Install Method: Kalyway 10.5.1 & Kalyway Combo Updater BIOS Version: F12; Revision: 2.1 Audio: Works with HDA ICH9 ALHC888 works & Apple HDA Patcher v1.20 (EDIT: actually is a ALC889a that patch works great) LAN: Works OOB SATA & IDE: SATA works with IOATAFamily.kext V1.1 Optical Drive: LG GSA-H55L IDE (Fully Working with IDE to SATA Cable ) Shutdown & Sleep don't work, restart unknown	EFI v8 & Vanilla Kernel	No, Audio needs patching
GA-P35-DS3L	Intel P35	Install Method: Kalyway + Apple Update 10.5.2 + Graphic Update BIOS Version: F8f Audio: Works with patched AppleHDA LAN: Works out of the box, Bonjour might need R1000 kext. SATA & IDE: SATA woks OOB, AHCI works with all ports with This Shutdown and Restart work, Sleep doesn't work	Yes. Fully supported EFI + Vanilla kernel	No. Audio doesn't work
GA-P35-DS3P	Intel P35 + ICH9R	Install Method: Kalyway 10.5.1, Kalyway 10.5.2 Combo Updater & Kalyway Kernel update BIOS Version: F8; Revision: 2.0 Audio: works with ALCinject.kext and AppleHDA.kext LAN: LAN working out of the box SATA & IDE: SATA works out of the box, using AHCI	Yes. Fully supported EFI + Vanilla kernel	No; Audio need patching
GA-P35-DS3P (REV 2.1)	Intel P35 + ICH9R	Install Method: Leo4All V2 BIOS Version:; Revision: 2 Audio: Model, ALC889A - Used Taruga AppleHDA patcher; removed ALCInject.kext its not needed with EFI string LAN: Model, Realtek 8111B SATA works, in BIOS set all disk modes to ACHI (see patching note) IDE: not tested (yet) Samsung SH-203B - Sata interface Yes, all. Firewire, and USB ports all working	Yes; EFI & 9.2.2 vanilla	No, Audio needs patching (see above)
GA-P35C-DS3R	Intel P35 + ICH9R	Install Method: iDeneb 10.5.5 Hardware: Intel Core 2 Duo 2.66GHz CPU, Patriot 4GB DDR2 667MHz memory (dual channel), EVGA NVIDIA GeForce 8400GS PCIe graphics card, 600watt Cooler Master PSU, Samsung 1TB SATA HDD, Sony IDE DVD+-RW/DL Burner. Everything works out of the box, except for the following: IDE (Gigabyte SATA2 controller chip, which is a re-branded JMicron ATA/SATA controller). I just changed IOPCIPrimaryMatch in JMicronATA.kext and it worked. NVIDIA Dual-monitor setup. I just tweaked the NVCAP value in NVinject.kext and it worked. See NVinject forums for info. Sleep and shutdown. To get both of these working, I changed Suspend type to S1 in the BIOS, and installed "poweroff_fix" (search the InsanelyMac forum) which disables 1 of the CPU cores at shutdown time. Working out of the box: Full audio (ALC889), LAN, SATA (set BIOS to AHCI mode), USB, PCIe, Bluetooth, IDE DVD Burner, Video with NVinject (QE/CI), EFI, Vanilla kernel, etc.	Yes	Almost (See fixes I've listed here).
GA-P35C-DS3R	Intel P35 + ICH9	Install Method: Kalyway + Apple Update 10.5.2 + Graphics Update BIOS Version: F4 Audio: Works with patched AppleHDA + ALCinject (mic works) LAN: Works out of the box, but sourceforge Realtek R1000 driver is better (fixes Bonjour) SATA: SATA works out of the box, using AHCI on ICH9 controller (JMicron disabled)	Yes. Fully supported EFI + Vanilla kernel	No. Audio needs patch
GA-P35-DS3R	Intel P35 + ICH9R	Install Method: Kalyway 10.5.1 + Kalyway Upd. 10.5.2 + Vanilla kernel 9.2.0 + Graphics Upd. BIOS: Sata native mode, 64 bits enabled, Vanderpool enabled, Sleep S0 (S3 doesn't work) Audio: works with patched AppleHDA + ALCinject LAN: works out of the box SATA: works out of the box, using ICH9R without AHCI (JMicron disabled)	Yes. Fully supported EFi + Vanilla kernel (kernel 9.2.2 ok)	No. Audio needs patch
GA-P35-DS4 (rev.2)	Intel P35	Install Method: Kalyway 10.5.1 & Kalyway Combo Updater & Leopard GA-P35-DS4 install pack (http://forum.insanelymac.com/index.php?showtopic=77165) BIOS Version: F11; Revision: 2 Audio: Works with HDA ICH9 ALHC889A LAN: Works OOB SATA & IDE: SATA(ahci) works and IDE to Optical Drive: SAMSUNG SH-S182M IDE FW and USB working OOB Shutdown & Sleep work, restart unknown	EFI v8 & Vanilla Kernel	No, Audio needs patching
GA-P35C-DSL	Intel P35	Install Method: Kalyway 10.5.1 & Kalyway Combo Update BIOS Version: F6; Revision: 2.0 Audio: ALHC888 and Apple HDA Patcher v1.20 LAN: Doesn't always work SATA & IDE: Both fully working Optical Drive: LG GSA-H22N BK (Fully Working) Shutdown & Reboot fully working, Sleep not tested	EFI v8 + Vanilla Kernel	No. Audio needs patch
GA-P31-DS3L	Intel P31 + ICH7	Install Method: Kalyway 10.5.2, iDeneb 10.5.5, Jas 10.5.2 and Leo4all 10.5.2 BIOS Version:; Revision: Audio: ALC888 with AC97 kext (on DVDs) or ALC888audio (6 channel and inputs) LAN: 8111 (kext on DVDs) SATA & IDE: SATA and IDE works Updates working with IntelCPUPMDisabler.kext Shutdown, sleep and restart works with shutdownfix	Vanilla works with core duo and core2duo processors. EFIv8 works.	Yes
GA-P31-DSL	Intel P31 + ICH7	Install Method: BrazilMac Patched DVD & MBR Partition BIOS Version: F8; Revision: Unknown Audio: Realtek ALC888 works with AppleHDA Patcher LAN: RTL 8111B works OOB SATA & IDE: Works OOB	EFI v8 Works	Audio needs patching
GA-G33M-DS2R	Intel G33	Install Method: Kalyway 10.5.1 + manual Update to 10.5.2 + Graphic Update BIOS Version: F6 Audio: Works with AppleHDA patch (stereo out, front panel, digital, mic, line in) LAN: Works out of the box SATA 6 ports works AHCI IDE works Thysm00 Guide	Yes. Fully supported EFI v8 + Vanilla kernel	No. Audio needs patch.
GA-G31M-ES2L	Intel G31	Install Method: Retail disk, using HFS+ EFI bootloader BIOS Version: F3 Audio: Realtek ALC662, untested LAN: Works out of the box SATA & IDE: Works out of the box	Yes. Fully supported EFI + Vanilla kernel	Audio may need patch.
GA-G31M-S2L	Intel G31	Install Method: iDeneb 10.5.5 - selected: Vanilla Kernel 9.5 on Intel Core2Duo 7200 BIOS Version: F8a Audio: Realtek ALC662 works 100% using Alc662 chipset patch on installer DVD LAN: Works out of the box SATA & IDE: Work OOB using ICHx chipset patch on installer DVD	Yes. Fully supported EFI Chameleon + Vanilla kernel	No. Audio needs patch.
GA-G31M-S2L	Intel G31	Install Method: LEO4ALLv3 -selected:Vanilla Kernel 9.2.2, EFI, & ICHx Chipset drivers SM Bios 2.3, ACPI 1.0b, PnP 1.0a, DMI 2.0 Audio: Realtek ALC662 works with AppleHDA patcher & alc662.txt or Use Azallia Audio on installer DVD LAN: Works out of the box, reccomended to set ip address manualy. *Bonjour doesn't work properly! Switched to Netgear GA311 for full compatibility. SATA & IDE: Work OOB using ICHx chipset patch on installer DVD Thysm00 Guide	Yes. Fully supported EFI v8 + Vanilla kernel	No. Audio needs patch.
GA-G31M-S2L	Intel G31	Install Method: Kalyway 10.5.2, Vanilla Kernel Configuration: M/B, Core2Quard (detected as 2.4 GHz Unknown), Radeon X1600XT (id 0x71c0), 2x1GB DDR2 After installation: 1) download Azalia HD Audio Fix 2) Fix VideoCard 3) 4) Fix Reboot/Shutdown/Sleep? problem 5) 10.5.3 ComboUpdate 6) Download 10.5.4 update from AutoUpdate LAN: Works out of the box, reccomended to set ip address manualy. *Bonjour doesn't work properly! But, sometimes after correct (not manual) restart/shutdown, LAN not working (error - cable unplugged). SATA & IDE: Work OOB using ICHx chipset patch on installer DVD Thysm00 Guide Correct reboot & shutdown working after path, sleep maybe not working. Internal video not fully working.	Yes. Fully supported EFI v8 + Vanilla kernel	No. Audio needs patch.
GA-G31M-S2L	Intel G31	Install Method: iDeneb 10.5.5 Selected packages (during installation): ALC662, ICHx chipset patch Audio: required patching (see right) LAN: Works out of the box. SATA & IDE: Had problems booting with SATA disk drive. PATA worked with no problems.	Yes. Fully supported EFI v8 + Vanilla kernel	No. Installed AzaliaAudio.zip from [12]
GA-G31MX-S2	Intel G31	Install Method: Jas 10.5.4 Audio: Realtek ALC888 works out of box LAN: Realtek RTL8110SC works out of the box SATA & IDE: SATA works out of box, IDE DVD-ROM drive works Video: Intel GMA 3100 has no core image or quartz extreme, will add Nvidia 7300LE 256MB card later	Yes.	Yes
GA-K8NF-9	NVIDIA nForce4 (4X) MCPs	Install Method: Zephyroth Leopard 10.5.2 AMD BIOS version: Unknown Audio: Realtek ALC850 Audio AC'97 Codec : Works with Kext but, may works out of the box. LAN: Works out of the box SATA: Works out of the box IDE: Not tested	Yes	Yes
GA-K8N-SLI	NVIDIA nForce4	Install Method: Leo4All v2 BIOS version: F9 Audio: Realtek ALC850 -marked 850 driver in Leo install. LAN: Works OOB SATA: Works OOB IDE: Works OOB Restart & Shutdown work, no Sleep	Yes	Yes
GA-K8N51GMF-9	NVIDIA nForce 430	Install Method: Zephyroth Leopard 10.5.2 for AMD BIOS Version: F7; Revision: Unknown Audio: Yes (Stereo) works with "beta4some860_880" LAN: Works with forcedeth-nockd.kext SATA & IDE: Does SATA work? Any options in BIOS or Patches? Same thing with IDE Restart & Shutdown,Sleep fully working	Unknown	LAN and Audio needs patch
GA-P965-DQ6	Intel P965 + ICH8R	Install Method: Kalway 10.5.1, Kalyway 10.5.2 Combo Updater & Kalyway Kernel update BIOS Version: F11; Revision: 1.0 Audio: Realtek ALC888DD; Not Tested LAN: Marvell 8053, works OOB SATA & IDE: Both work OOB Computer wakes from sleep, keyboard doesn't work after that	Unknown	Yes, audio not tested
GA-P965-DS3	Intel P965	Install Method: Kalway 10.5.1 & 10.5.2 Combo Updater BIOS Version: F10; Revision: Unknown Audio: Works LAN: Works SATA & IDE: Works	Unknown	Yes
GA-965P-S3	Intel P965 + ICH8	Install Method: Kalway 10.5.1, Kalyway 10.5.2 Combo Updater & Kalyway Kernel update (vanilla) or iATKOS and patch (see below) Kalyway: (kernel panics with memory > 3GB) Options: EFI_guid, Natit, ALC883, Vanilla kernel +fix BIOS Version: F12; Revision: 1.0 Audio: ALC883; Headphones work (only front panel jack), Line out not working, Digital out not tested LAN: Marvell 8056 Gigabit; Works OOB SATA & IDE: (both set to AHCI) Only Orange connectors (not purple); Works OOB iATKOS: (kernel panics with memory > 3GB) Audio: Works OOB LAN: Need to repatch after update, save AppleYukon2.kext before upgrade and replace this file after upgrade, reboot twice Install iATKOS 1.0i and then upgrade to 10.5.2 with guide here	Yes	Yes, Audio: only headphone, lineout and digital showing in preferences: not fully tested
GA-965P-S3 rev1.1	Intel P965 + ICH8	Installed with PC_EFIv8 using Retail 10.5 Install DVD + 10.5.2 Combo Update (installed from separate Kalyway partition used for system maintenance) BIOS Version: F13e; Revision: 1.1 Audio: ALC883 using SkippyRetard ALC8xx installer enables the use of all Analog Ports (5.1/7.1) as well as Line-In and Mic Jack. LAN: Marvell 8056 Gigabit - Needs plist configuration (change 8053 to 8056 IDs) of IONetworkingFamily.kext (vanilla) SATA & IDE: JMicron IDE not useable under AHCI, JMicron SATA AHCI useable with plist configuration of AppleAHCIPort.kext (generic), ICH8 last 2 ports (of 4 total) not working with 10.5.2 IOAHCIFamily.kext - 10.5.3 kexts fixes this. No 3072MB/4096MB (3GB/4GB) memory limit as compared to other Custom Installations (Kalyway/iATKOS/Loe4ALL) due to the absence of JMicronATA.kext and AppleVIAATA.kext - Tested on 6144MB (6GB) and 8192MB (8GB) equipped systems.	Yes	Yes; Audio needs patching for 5.1/7.1 output, LAN needs plist configuration, AHCI needs plist configuration, EFI Strings for GFX and Audio (if not using NVInject/NVKush/NATIT and ALCInject)
GA-945GCM-S2C	Intel 945G + ICH7 Chipset	Install method: Kalyway 10.5.1 Install DVD Update to v10.5.2: Netkas method kernel 9.2.2 ok BIOS version F4, Rev. 1.0 Audio requires AppleAzaliaAudio.kext LAN working out of the box SATA and IDE working out of the box Certain applications (i.e. FireFox) cause Intel GMA950 glitches	EFI + Vanilla kernel 9.2.2 working	No; Audio needs patching
GA-945GCM-S2L	Intel 945G + ICH7 Chipset	Install method: Kalyway 10.5.1 Install DVD Update to v10.5.2: Kalyway 10.5.2 Combo update + Apple update + Kalyway 10.5.2 Kernel update Audio requires Azalia_Out.kext on Kalyway LAN not working out of the box need to use RTGMac_v1.1.6.zip SATA and IDE working out of the box	EFI + Vanilla kernel working	No; Audio/LAN needs patching
GA-945GCM-S2L	Intel 945G + ICH7 Chipset	Install Method: Kalyway 10.5.2 Install DVD then Kalyway 10.5.3 Upgrade then Apple update to 10.5.4 Audio: Working with Azalia_Out.kext or this driver [[13]] LAN: Works OOB with default settings on Kalyway 10.5.2 Disk, however after computer wakes from sleep it has no LAN connectivity SATA & IDE: Both Working (on all 10.5.2 , 5.3 and 5.4) Optical Drive: LG super-multi - works fine Shutdown and sleep work but LAN connectivity is lost after waking from sleep	EFI + Vanilla kernel working	Everything seems to work OOB. Audio can be improved by using this guys driver[[14]]
GA-945GCMX-S2	Intel 945GC + ICH7	BIOS version: F4, Rev. 6.6 (1) Installation (v10.5.0) method: Onetrack method with EFI v8.0 on GPT using iGuru guide Update to v10.5.2: Netkas method Audio (ALC 888): Works with skippyretard patch Video (GMA 950): Works with modified AppleIntelIntegratedFramebuffer.kext from BrazilMAC guide LAN: Works out of the box IDE and SATA: Works out of the box Sleep/Wake, Restart, Shutdown work ---- (2) Installation method: iATKOS Audio: Works OOB LAN: Works OOB SATA & IDE: Works OOB	Yes	No. Audio and video need patches
GA-945GCMX-S2	Intel 945GC + ICH7	BIOS version: F6c Am using onboard GMA950 video and Celeron D 630. With Leo4all v3, everything works fine - Patched 9.2.2 Kernel, ALC888, Realtek LAN, GMA950 older version (Resolution Change version), ICHx support	EFI bootloader untested, due to usage of Celeron D CPU. Minor graphics glitches, mainly related to mouse cursor.	Yes
GA-945GZM-S2	Intel 945 Chipset	Install method: Kalyway 10.5.1 + Kalyway 10.5.2 ComboUpdate BIOS version unknown, Rev. unknown (1/29/07) Audio needs skippyretard's driver LAN works out of the box SATA and IDE working	Unknown	No; Audio needs patching
GA-945P-S3	Intel 945P + ICH7	Install Method: iATKOS V1.0i & Kalyway 10.5.2 Updater BIOS Version: Unknown; Revision: 3.3 Audio: Realtek ALC888 8 Channel Audio works LAN: Realtek 8111B Gigabit Ethernet works SATA & IDE: Both work	Unknown	Yes
GA-8I865GVMK F9 (Socket 478)	Intel® 865G GMCH & ICH5	Install Method: Kalyway Audio: Realtek ALC655 works LAN: Intel PRO/100 VE Ethernet Controller works SATA & IDE: Unknown Optical Drive: Unknown	Unknown	Unknown
GA-G31M-S2L	IntelG31 + ICH7	Install Method: Kalyway 10.5.2 + Kalyway ComboUpdate10.5.3 + OnlineUpdate10.5.4 (all Vanilla) BIOS Version: unknown Audio: ALC662, works with Taruga's HDA-patcher 1.20 & ALC662.txt from his page LAN: not tested (seems to be working OOTB though) SATA & IDE: no issues Optical Drive: SATA & PATA work Shutdown, reboot, sleep work fine Onboard-GFX: not tested HIGHLY RECOMMENDED!	YES (EFI_v8 & Vanilla, MBR)	Sound needs patching
GA-EG31M-S2 (rev. 1.0)	IntelG31 + ICH7	Install Method: Boot-132 from Darwin/x86 CD, swap Retail Leopard 10.5.0 disc into drive and install, Software Update to 10.5.5. BIOS Version: F2i (beta) Audio: ALC888, have not patched yet LAN: Realtek 8111C Gbit, tested, works OOTB SATA & IDE: using only SATA drives Optical Drive: SATA works Shutdown works fine; restart requires pressing reset button afterwards (may be issue with installed bluetooth adapter); sleep works fine Onboard-GFX: not tested	Yes	Sound needs patching
GA-MA69G-S3H (Socket AM2)	AMD 69G & SB600	Install Method: Kalyway 10.5.2, AMD patch Bios F6 Audio: Realtek ALC889A (works after applying Tauraga patch) LAN: Realtek RTL8110 GE Ethernet Controller works SATA: works IDE: works Optical Drive: works with SATA and IDE Onboard video does not work	No	Only needed to patch Audio with hdapatcher and the txt file from tauraga
GA-M61SME-S2 (Socket AM2)	nForce 405 / nVidia Geforce 6100	Install Method: Kalyway 10.5.2, AMD patch BIOS Version:; Revision: Audio: nForce AC97, worked out of box LAN: nForce onboard 10/100, Failed VIDEO: not tested, Geforce 8500GT used instead. SATA: Installer fails to load, but once OSX is installed runs fine. Optical Drive: works with SATA Yes No	Yes	No, Lan needs patching.
Ga-p35-s3g(rev1.0)	P35	Leo4all 10.5.2 Lan (works out of box) 5.1 alc662 card works(Only 2.1+Mic works +patch required) Gefore 6600gt used 1440*900 at 60Hz.(My monitor supportes upto that only) samsung dvd sata works(burn test not done) Only Audio need patching all other things work out of Box. For More info about audio visit http://forum.insanelymac.com/index.php?showtopic=96725&st=0&p=690751&#entry690751 For another hackintosh user experience http://forum.insanelymac.com/index.php?showtopic=121031&st=0&p=856502&#entry856502	Yes(Vanilla Kernel)	Only Audio need patching.

.

[edit] Intel

Hardware Name	Chipset	Notes	EFI/Vanilla kernel working	Fully Working w/o Patch
Intel DG43NB	Intel G43 Express Chipset ICH10	Install Method: Kalyway 10.5.2 Audio (ALC888VC), with Azalia driver found here (remove AppleHDA and HDAenabler kext before installing) Video (onboard, didn't worked), i use nVidia Quadro FX1400 LAN (Intel 82567LV) works with kext for 82566mm found here USB (12x) working Firewire (2x) working IDE working, SATA (6x) working 4GB DDR2/800 working Shutdown, Sleep and Reboot works Tested by Muhammad Anil Babur Kiani Note: Installed from Sata DVD	Sleep and Kabyl kernel is working
Intel DP43TF	Intel P43 Express Chipset ICH10	Install Method: iDeneb 10.5.4 Audio (ALC888VC), with Azalia driver found here (remove AppleHDA and HDAenabler kext before installing) Video (no onboard), i use ATI HD3870 LAN (Intel 82567LV) works with kext for 82566mm found here USB (12x) working Firewire (2x) working IDE working, SATA (6x) working 8GB DDR2/800 working Shutdown, Sleep and Reboot works Note: Installed from Sata DVD	EFI & Vanilla is working
Intel D201GLY2(A)	Silicon Integrated Systems® SiS964 Chipset	Install Method: Leo4All Audio (ADI, AD1881), not working Video (SIS Mirage 1), working in VESA mode (no acceleration) LAN (SIS900) not working USB working IDE working, SATA controller not working Notes: Soldered CPU, 1x PCI slot, 1x DDR2 RAM slot. So it's impossible to have LAN and Audio working. Unfortunately, no cheap Hackintosh with this one.	EFI is working Vanilla not tested
Intel D5400XS(Skulltrail)	Intel® 5400 Express Chipset	Install Method: Kalyway 10.5.2 DVD, then install 10.5.5 update, after that install the driver(s) Audio Sigmatel STAC9274D Working with Apple HDA Patcher 1.16 and STAC9274D codec dump available at insanelymac forums LAN Intel Gigabit Ethernet working out of box USB working out of box for all ports and all devices FireWire works out of box IDE working, SATA controller working in AHCI mode, Native, detected as ESB2 or Unknown AHCI controller According to the IO Registry, some devices are not working, but everything works fine Optical drives, harddrives, ram and all pci slots work Installs from SATA DVD Drive 2xFW/10xUSB/6xSATA/2xeSATA/1xIDE/Surround Audio/ Socket 771! with 775 cooling mounts / eATX factor	PC_EFI works, Vanilla does not work (panic), Shutdown/Reboot sometimes hangs (cpu's halted, video off, but power still on)	Audio controller requires patching
DP35DP	Intel P35 + ICH9	Install method: Kaliway's 10.5.1 DVD + 10.5.2 Combo Update following this tutorial BIOS Version: DPP3510J.86A.0413 Audio: Works with Kext Helper & STAC9271D_0x83847627_testing codec downloadable here Onboard LAN does not work (buy a cheap realtek) USB, Firewire work out of the box IDE/ATA does not work SATA works in IDE Mode Optical Drive must be SATA or ATA to perform install To make restart fully work, install 10.5.3 combo update from Kalyway	EFI v8 + Vanilla Kernel Working, Restart and Sleep work	Audio requires patching
DG33FB	Intel G33	Follow this guide [15]	EFI v8 + Vanilla Kernel Working	Audio and IDE require patching, Lan required patching too
DG33FB	Intel G33	Install method: Kalyway 10.5.2 DVD_Intel_AMD and Vanilla Kernel 9.2. Upgradable to 10.5.5. iDeneb does not work. Hangs up at Disk Utility (and if Disk formatted then at Installation) BIOS Version: DPP3510J.86A.0413 Audio: Works with ALC888 Onboard LAN does not work (Realtek 8139 PCI card native OOB) USB (6+2) & Firewire work out of the box Onboard USB & Firewire work for front panel IDE works, no Patching SATA works in AHCI & IDE Mode IDE & SATA Optical works, fully iTunes & DVD Player functional Onboard Intel GMA3100 graphics mixed result. Works for some at 1024x768 fixed resolution, not further tested. Most likely would not work though! EVGA Nvidia 7600GT KO - all resolutions, NVinject-256 via Kalyway disc	EFI v8 + Vanilla Kernel Working	Audio requires patching. Full sleep/shutdown/restart with Patching.
DG33TL	Intel G33	Install method: Kaliway's 10.5.2 DVD BIOS Version: Audio: Works with Patching Onboard LAN does not work Onboard Video does not work USB, Firewire work out of the box IDE (not tested) SATA works in AHCI Mode	EFI v8 + Vanilla Kernel Working	Audio requires patching; For more information, see Intel DG33TL Motherboard on the wiki, or this forum post on insanelymac.org.
D975XBX2 (BADAXE2)	Intel 975X Express ( ICH7 Southbridge)	Install Method: Leo4allv3 vanilla 9.2.2 BIOS Version: 2813 Audio: Onboard Unknown,I'm using external Rme Fireface 400 (Firewire) LAN: Intel® 82573E/82573L Gigabit Ethernet Controller, no patch, works! SATA & IDE: Both work! no patch Optical Drive: Samsung RW. Works fine Do shutdown,Yes with ACPIPI old 1.1.0	Yes both working	Need only contained dvd patch and driver. Install ichx, acpipi 1.1.0 otherwise no shutdown
D975XBX2KR (BadAxe2)	Intel 975X Express	Install Method: BrazilMac 10.5 + EFI v8 MBR, Vanilla kernel BIOS Version: 2813 [BX97520J.86A]; Revision: Unknown Audio: Need to patch with AppleHDAPatcher_v1.16 (STAC9274D) LAN: Need to replace IONetworkingFamily.kext from 10.4.9 + EFI strings to fix various UUID errors and TimeMachine SATA & IDE: Work OOB	Yes, both work
D975XBX2	Intel 975X & ICH7DH	Install Method: iATKOS_v1.0i vanila + 10.5.2 direct update (Netkas) SATA AHCI (GUID Partitions), IDE, USB, FireWire and Lan fully working. GF7600GT as EFI (string added): no injectors Sigmatel STAC9274D audio working with Taruga's AppleHDAPatcher 1.16 Onboard Marvel88SE61XX not working	Yes (pc_efi_v8 + pc_efi_v7.4)	Sigmatel Audio requires patch
Intel D945GCLF	Intel® 945GC and ICH7	Install Method: Kalyway 10.5.2 (kernel 9.2.0 + usb patch because System.kext is by default 9.2.2 and should be 9.2.0) Integrated Intel® Atom 1.6ghz (HT) processor working (system think it's a Core Solo 1.6ghz) Realtek ALC662 audio working (Mic Not working yet) Intel Graphics Media Accelerator 950 (QE/CI fully supported. It works like a charm!) LAN works, but after sleep losses DHCP connection, suggest to use manual IP as work around. Six USB 2.0 ports working Two SATA ports and One PATA IDE working Sleep works This is a perfect system! And really cheap (54€) Note: Some distributions might not support video resolution over 1280x1024 out of the box. After patching with a different version of IntegratedFrameBuffer kext, 1680x1050x32 works fine but no 3D support.	Efi working, Vanilla working	No patch needed! Everything works out of box
DQ965GF	Intel Q965	Install method: Kalyway 10.5.2 DVD_Intel_AMD Upgradable to 10.5.6 good working without disabler, can use custom DSDT: (Video, sound, ethernet) BIOS Version: Last Audio: Works with patched version STAC9227 (Mic, Line-in works fine) Audio(legacy kexts): DQ965GF topic Onboard LAN work but not support powermanagement, read this thread USB & Firewire work out of the box SATA works in AHCI Mode Onboard Intel GMA3000 doesnt work, required external videocard	Chameleon SMBIOS + Vanilla Kernel Working	Audio requires patching, or use legacy Audio kexts
Intel D945GCLF2	Intel® 945GC and ICH7	Install Method: Kalyway 10.5.2 At the installation window, Select customize. Under Intel_GMA, select GMA950 only. ( without this selection, you get 1024 x768 only). S-video out works at 800x600 only with default Leopard kexts. Do not select GMA950 in the Kalyway installer or S-Video will be solid black or blue screen. Integrated Intel® Dual-Core Atom 1.6GHz (HT) Processor (System reports it as Core Duo @ 1.6GHz) Realtek ALC662 audio working (Mic not working yet) Intel Graphics Media Accelerator 950 (QE/CI fully supported) Gigabit LAN Six USB 2.0 ports working Two SATA ports and One PATA IDE working Sleep works This is a perfect dual core system! Motherboard was $90 CAD.	Efi working, Vanilla working	No patch needed! Everything works out of box
Intel D945GNT	Intel® 945G Express Chipset	Install Method: All Audio (Sigmatel 9220) works with patch 9200.pkg LAN works with ASUSP4800vm.pkg {for tiger add product ID to AppleIntel8255x.kext}{for leopard need IONetworking family.kext} SATA & IDE works	Efi is working Vanilla not tested	Sigmatel Audio require patch Intel® Pro/100ve requires driver
945GNTKLR	Intel 945G	Install Method: Kalyway 10.5.1 & Combo Updater BIOS Version: Unknown; Revision: Unknown Audio: HDA Intel 9221 & Apple HDA Patcher v1.20 LAN: Works OOB SATA & IDE: SATA & IDE work Video: GMA950 works by replacing current appleIntelIntegratedFramebuffer.kext with version 1.4.20 Optical Drive: Pioneer 111D fully working	EFI works, Vanilla doesn't	Audio needs patching
D945GTP	Intel 945G	Install Method: iATKOS or Kalyway 10.5.1 with Kalyway 10.5.2 update BIOS Version: Unknown; Revision: Unknown Audio: Sigmatel 9220 needs patch LAN: Intel PRO 10/100 needs patch SATA & IDE: SATA works, IDE not tested	Unknown	No
D945GCL	Intel 945	Install Method: Kalyway 10.5.2 DVD Intel_Amd MBR, disk name Leopard had to patch network and audio SATA and PATA work OOB details here	EFI v8 and Vanilla 9.2.2 working	needs audio and network
D915GAV	Intel 915G	Install Method: Kalyway 10.5.1 and modified 10.5.2 Combo Update. See gizmoarena for more info BIOS Version: Unknown; Revision: Unknown Audio: Realtek ALC882 HD works with Azaila patch LAN: SURECOM EP320X-R (Realtek chipset) works OOB SATA & IDE: Works OOB	PC-EFI	Audio Needs Patching
D915GAG	Intel 915G	install Method: Kalyway 10.5.2 DVD Intel_Amd MBR kernel kabyl 9.2.2 stock options for sound and network OOB AppleOnboardPCATA and AppleGenericPCATA netkassmbios see here for details	no, P4 Prescott 630	yes
D865GLC	Intel 865	Install Method: Brazilamc Patched DVD with Kalyway 10.5.2 Updater & Brazilmac Post-Patch BIOS Version: Unknown; Revision: Unknown Audio: Works OOB LAN: Works OOB SATA & IDE: IDE works, SATA not tested	No	Yes
D915GAV	Intel 915G	Install Method: Kalyway 10.5.1 and modified 10.5.2 Combo Update. See gizmoarena for more info BIOS Version: Unknown; Revision: Unknown Audio: Realtek ALC882 HD works with Azaila patch LAN: SURECOM EP320X-R (Realtek chipset) works OOB SATA & IDE: Works OOB	PC-EFI	Audio Needs Patching
Intel DG31PR	Intel G31- no qc/qe	Install Method: LEO4ALL V2 picked the options for Vanilla 9.2.2, sound, net BIOS Version: 0047; Revision: BIOS Update 0047 PRG3110H.86A Audio: Model, RealTek* ALC888, used alc888 patch included on DVD LAN: Model, RealTek* RTL 8111, used realtek patch included on DVD SATA & IDE: 3 sata drives all working no problems, including a ATA usb backup drive Optical Drive: LG IDE lightscribe works perfect with lightscribe software and toast 9 Do shutdown, reboot and sleep work? perfect	Yes, Yes	Audio requires patching. Kalaway/iatkos req. the gparted method and wouldn't work with a partitioned disk but leo4all will.
DG31PR	Intel® G31	Install Method: Kalyway 10.5.2 BIOS Version: 0047 [PRG3110H.86A ] Audio: Realtec ALC888, use this patch: AppleHDA patcher. Lan: Realtek* RTL8111-GR Gigabit Ethernet Controller, working OOB. SATA & IDE: Both are working fine OOB. Shutdown, sleep and reboot: Working fine.	EFI v8 and Vanilla kernell working.	Audio needs tweaking, use the AppleHDA patcher v1.20, with this file.
DG31PR	Intel G31	Install Method: Kalyway 10.5.2 Audio: OOB main out, full op on patch mentioned above Lan: OOB SATA & IDE: OOB Shutdown, sleep and reboot: OOB Other Details: Bought this MB on account of two reviews above, very pleased indeed :) cheap and powerful. Onboard graphics makes for a nasty CPU fanspeed and temperature, recommend separate graphics (o/b graphics untested for full boot). System profiler shows PentiumD 3.2GhZ as 100MhZ and bus speed 3.2GhZ but this is just some random glitch, benchmarks show good performance. Up and running with no problems for over a week now.	Vanilla kernel tested fine	Easy audio patch (as above) - main audio out works OOB
DG31PR	Intel G31 Chipset	Install Method: Kalyway 10.5.2 Audio: OOB main out, Select Apple HDA during installation Lan: OOB SATA & IDE: OOB Shutdown, sleep and reboot: OOB Graphics: Nvidia XFX 8500 GT(512MB) - Works with Nvinject 512 selected during installation Other Details: System profiler shows Core 2 Duo (Wolfdale) 2.66Ghz as 2.66GhZ Unknown and bus speed 3.2GhZ , yet benchmarks show grea performance and in most tests out-beating results of Mac Pro.	Vanilla kernel works perfectly	Everything works OOB (Be sure u selected right audio/graphics drivers when installing)
Intel® Desktop Board DQ35JO	Intel® Q35 Express Chipset	Install Method: Kalyway 10.5.2 DVD BIOS Version: JOQ3510J.86A.0559.2007.0726.0425 Audio: Realtec ALC268, use/select AppleAzalia audio driver in the installer. Lan: Intel® 82566DM Gigabit Ethernet Controller, currently NOT working. SATA & IDE: Both are working fine OOB. Shutdown, sleep and reboot: Working fine except sleep. But this (sleep) may depend on what you attached to your motherboard.	EFI v8 and Vanilla kernell working.	Audio needs tweaking, use ALC268 driver from AppleHDA Solution.
D865PERL (no LAN)	Chipset (865PE and ICH5)	Install Method: Kalyway 10.5.2, Software update through to 10.5.5 w/ CPUPowerManagement disable hacks Audio: SoundMax Integrated Audio (included in DVD) LAN: D-Link DFE-530TX+ (works OOB) SATA & IDE: SATA and IDE work. IDE recognized as ATA Bus Optical Drive: LiteOn DVD Reader: Works OOB...BenQ Dual Layer DVD Burner: Works OOB...burns DL and DVDs GeForce 6600 AGP work using NVkush or NVinject 0.2.1 Shutdown, Restart and Sleep work Other Details:	PC-EFI work, Vanilla doesnt
DG35EC	Chipset (G35)	Install Method: Kalyway 10.5.2 Audio: Realtek 888S does not (yet) work, but have hope LAN: Integrated Gbit; working with com.tootoosoft.driver.Intel82566MM driver and DeviceID hack SATA & IDE: SATA and IDE work, installed as AHCI GeForce 6600 PCIe works with EFIStudio injection Shutdown, Restart and Sleep work Other Details:	EFI v8 and Vanilla kernell working.	888S Audio needs work
DG965RYCK	Chipset (G965) with nvidia quadrofx 1400	Install Method: Kalyway 10.5.2 on Pentium 4 3.2 GHz (Prescot) Audio: does not work, fulfilled with Creative soundblaster live with patch at found www.insanelymac.com LAN: Integrated Gbit; didn't work, 3com external tx905c SATA & IDE: SATA and IDE work, installed as AHCI Shutdown, Restart and Sleep work Other Details: Unsupported Core 2 duo E7300 created a conflict that was resolved by downgrading the processor to E6600. Tested by Muhammad Anil Babur Kiani	EFI v8 and sleep, Vanilla, modbin kernell working.	Samsung LCD syncmaster auto profile.

[edit] Jetway

Hardware Name	Chipset	Notes	EFI/Vanilla kernel working	Fully Working w/o Patch
Jetway 945GCDMS-6H	Intel 945GC + ICH7 Chipset	Install Method: Kalyway 10.5.1 Installed and Update to Kalyway Hack 10.5.2 Combo Update BIOS Version:; BIOS Revision A03 Audio: Onboard Realtek ALC883 Needs patching in order to work, after patching it will work! LAN: Realtek 8100C Works out of the Box detected as Realtek 8139 SATA & IDE: SATA and IDE Works out of the Box Very perfect motherboard for a hackintosh, Using Core 2 Duo E4300 1.8GHz Pretty fast for Leopard! Like a real mac! =) and very cheap motherboard too!	Works Perfectly	Yes

.

[edit] MSI

Mainbord	Chipset	Notes	EFI/Vanilla kernel working	Fully Working w/o Patch
G31TM-P21 Micro ATX	Intel G31 Express Chipset	Method: Kalyway 10.5.2 DVD Intel AMD / Leo4All 10.5.2 / iATKOS V7 with Chameleon V2 and V1 Intel C2D E7900 @2.93ghz and 2 Gb PC2 5300 DDR Fails on all flavors Better results after removing ATi Radeon 3870 - But still fails	Voodoo 9.5 and Voodoo 9.7 + Seatbelt Fix are the only ones I remember, I tried 8 hours worth of combinations	NO - This entry is for anyone trying to use OSX86 on this type of Motherboard, the BIOS is too limited in options to allow you to boot into any flavor of OSX. It will boot off cd, and install, partition...etc..but will not work. DOES NOT WORK , for example here: [16]
P35 Neo-F	P35 / ICH9	board does not work with standard BIOS from MSI I was lucky to find someone who did the trick and now have it running with a moded BIOS You can find the moded BIOS here: [17] Install Method: Kalyway 10.5.2 no patches Onboard Works(Except Input) Ehternet: Works (sometimes doesn't, still trying to figure out the problem) USB: Works (sometimes doesn't, still trying to figure out the problem) SATA: Works IDE: doesn't work	EFI+Vanilla Working with E8200	No patches needed
915PL Neo-V	915PL	Install Method: Kalyway 10.5.2 DVD BIOS Version: latest; Revision: Unknown LAN: works without problem Audio: Works with kalyway out-of-box USB: works perfectly SATA: Works IDE: Works
945PL Neo	945PL / ICH7	Install Method: Iatkos 5i BIOS Version: Stock Revision: Unknown LAN: Appears to work, but not tested. Audio: Works with patch: [18] USB: Works for front ports and 2 out of 4 rear ports. SATA: Works IDE: Works	EFI Works, used Voodoo kernel.	No, needs patch for audio.
K9N Diamond (MS-7226)	nForce 590 SLI / MCP61	Install Method: Leo4All v.3 with amd pathches Install method Leo4all v.3 Installed using 9.2.0 kernel by netkas BIOS version: 1.8 Revision: A2 Lan: works 100% with forcedeth(included in leo4all) Audio: doesnt work anyway(Creative SB live! 24bit) USB: workin OOB SATA: works IDE: works Fireware: works OOB	Vanilla kernel not tested	no, audio need drivers
K9N Platinum	nForce 570	Install Method: Kalyway 10.5.2 With AMD Patches, Realtech Audio Drivers, USB-Ehci fix on insanelymac forum. Install Method: Kalyway 10.5.1 & Combo Update. Installed using Vanilla Kernel, and EFI Complete Install and Reboot Use -x on first boot Setup First boot in safemode. BIOS Version: Unknown; Revision: Unknown LAN: unknown Audio: Works with kalyway included drivers USB: Works with USB-Ehci kext replacement (you can find it on: insanelymac forum.) SATA: Works IDE: Works	EFI+Vanilla Works	Kalyways included AMD Patches, Realtech audio drivers & USB-EHCI Fix on insanelymac forum.
P35 NEO 3-F	Intel P35 / ICH9	Install method: Kalyway 10.5.2 BIOS AMI version 1.12 works only with SEE2-Patch Audio ALC888 does not work Ethernet RTL8111 works with RTL1000-Patch USB works SATA works Video ATI Radeon HD2600 PCIE works with ATI-Patch IDE not tested	EFI+Vanilla working with E6750	Patches for Audio, SEE2 support, ATI and Ethernet needed
P45 NEO 3-F	Intel P45 / ICH10	Install method: Kalyway 10.5.2 BIOS AMI version 1.12 works only with JAS1048SSE2 selected Audio ALC888 works with AppleHDA.kext and HDAPatcher.kext Ethernet RTL8111 works out of the box USB works SATA working with AHCI and APIC selected in BIOS Video Galaxy GeForce 9500 GT displays all resolutions but no QE using guide: [19] IDE working	Vanilla working	Patches for Galaxy GeForce 9500 GT needed
P965 Neo2 -FI	P965 / ICH8	Install Method: Leo4All 10.5.2 vanilla, EFI MBR Onboard audio disabled (b/c of USB external sound here) BIOS 3.8 WORK! (Only when DOT is CPU ONLY and set to 1%) LAN, SATA work(tested with 1 HDD,1 DVD-RW), IDE not tested	EFI+Vanilla working with E8200	Onboard audio need patch
P965 Neo2(-FI)	965 / ICH8	Install Method: Kalyway 10.5.1 EFI Guid (updated to vanilla 10.5.2 Audio needs ALC888+Azalia Driver from here BIOS Ver: 3.7 (3.8 DOES NOT WORK!) The rest all works out of the box except IDE and the 5th SATA port because its on the same chip as IDE (Marvell ® 88SE6111) link to motherboard overview	EFI+vanilla working on my Core 2 Quad Q6600	No, Everything works, except IDE and audio needs ALC888+Azalia patch
P965 Neo	965 / ICH8	Install Method: Kalyway 10.5.1 Efi Guid or MBR Audio needs ALC883 Driver from install DVD BIOS Ver: Latest LAN (Realtek 8110SC) Works out of the box No IDE support (Because of JMicron Chip) All drives should be sata, All IDE should be empty. IDE DVD in USB external Box return /com.apple.Boot error. Disable Lan Option ROM from BIOS settings	EFI working, Vanilla unknown	No, Everything works, except audio needs ALC883 driver from Kalyway DVD
975X Platinum Power Up	965 / ICH8	Install Method: iatkos v1.0i + Kallyway 10.5.2 Update - vanilla, EFI MBR Onboard audio working LAN, SATA, IDE work
945GM3-F	945 / ICH7	Install Method: Kalyway & vanila_acpi_fix BIOS Version:; Revision: Audio: Realtek Audio works with Azalia LAN: Realtek LAN works OOB SATA & IDE: SATA works	Unknown	Audio needs patching
P965 Platinum(-FI)	965 / ICH8	Install Method: Kalyway 10.5.1 EFI Guid (updated to vanilla 10.5.2 Audio needs ALC888+Azalia Driver from here BIOS Ver: 1.6 (1.8 DOES NOT WORK!)	EFI+netkas 10.5.2 kernel or toh	No, Everything works, except IDE and audio needs ALC888+Azalia patch
MSI-7223/915GVM3-V	Intel 915GV / ICH6	Install method: Kalyway 10.5.2 Everything except onboard video works. Out/In put's on audio work fine. Onboard (GMA900) doesn't work due to being too old for leopard.	Unknown	Yes, except for onboard video (Not supported).
K9N SLI-2F	nForce 570 SLI MCP	Install Method: Zephyroth 10.5.2 Install DVD BIOS Version: 3.70; Revision: Unknown Audio: Works after patching using AppleHDA Patcher 1.17 with ALC883 linux codec dump from here LAN: Doesn't work SATA & IDE: SATA works with nForce Chipset Drivers, IDE works OOB Optical Drive: LITE-ON LH-18A1H works	Unknown	No, LAN doesn't work, Audio needs patch
K9N6SGM-V	MCP61 (nForce 4 & 6100 video)	Install Method: Zephyroth 10.5.2 for AMD BIOS Version: 052207; Revision: Unknown Audio: ALC883, patch on DVD does not work, Taruga ALC883 works for output (input not tested, but recognized) LAN: Doesn't work SATA & IDE: Both work OOB Using 9.2 on Zephyroth enables USB Not selecting a kernel during install allows Apple updates, but no USB	No	Audio needs patch, LAN doesn't work
K8N NEO4 FI	NFORCE4	Install method Leo4Allv2 Kernel during installation BIOS unknown	NETKAS	Need no Patches everything works
P6N Diamond	680i	Install Method: Kalyway 10.5.2 Intel DVD (TPB) BIOS Version: v1.3; Revision: Unknown Audio: On-board Creative X-Fi xtreme audio DOES NOT WORK WHAT-SO-EVER. USB Audio, like a headset, will work though. LAN: On-board LAN, works with driver "forcedeth". Has some issues when dual-booting with Windows Vista. SATA & IDE: Everything works perfectly. Just make sure if you dual/triple-boot to shutdown your other OS's completely or OSX cannot read. I use Ext2FS for my Linux partition and NTFS-3g for my Vista partition. All work fine. Optical Drive: SONY DVD-RW DRU-540A. Works fine. Do shutdown, reboot and sleep work? Yes, have not tested sleep. Sleep, Speedstep, nForce, and Modbin kernels all work. Vanilla and kabyl kernels do not work.	PC-EFI works. Vanilla Kernel does not.	No patching required.
P6N SLI	nVidia 650i	Install Method: Kalyway 10.5.2 Intel/AMD DVD BIOS Version: v2.2; Revision: 06/18/2007 Audio: On-board nForce Audio ALC888 Codec works like a charm OTB LAN: On-board LAN cannot receive data, not working. Tried with up-to-date "forcedeth". SATA & IDE: Everything works perfectly. Installed to IDE just to make sure. Couldn't install from SATA DVD drive but maybe that was because I used a DVD+RW Optical Drive: SATA works fine External Firewire drives work fine. Low-speed USB mice and wacom tablets work fine. High-speed USB devices (ex: external drives) need patch (see notes) Do shutdown, reboot and sleep work? Yes, have not tested sleep. Update: sleep doesn't work. I use the nforce kernel, haven't tried the others.	PC-EFI works. Vanilla Kernel does not.	Make sure the vanilla kernel option is UNchecked during the install. High-speed USB devices do not work. You need to install the "usb_fix_1.3.mpkg.zip" from here No patching required. You _have_to use BIOS version 2.2 though. 2.1 will force you to use cpus=1, 2.5 (the latest) would hang the kernel at the memory prompt. For those who want to update to 10.5.3, the "JaS 10.5.3 combo update" worked like a charm, the "kalyway 10.5.3 comboupdate" crashed and messed-up the OS.
Neo2-Digital K9AG	AMD RS690G	Install Method: Zephyroth 10.5.2 V1 for AMD & 9.2.0 Kernel during installation BIOS Version: 1.14 Audio: Realtek ALC888 works with ALC888Audio.mpkg LAN: Realtek RTL8111B SATA & IDE: Work Optical Drive: TSSTcorpCD/DVDW SH-S183A works fine Shutdown & Reboot work, Sleep not tested	Unknown	Audio needs patching
G31M2	Intel IG31 ICH7	Install Method: Leopard Retail + Updated to 10.5.3 Bios Version: 7383v52 here Audio: Realtek ALC888 Works with AppleAzaliaAudio LAN: Realtek RTL8111B Works OOB STATA & IDE: Works OOB Optical Drive: Pioneer DVR-213NP SATA VGA: Used nVidia GeForce 7600GT PCIe (gfxutil efi mode) Shutdown & Reboot work, Sleep not working	PCEFI & Vanilla Kernel	Audio needs AppleAzaliaAudio
MS-7058	Intel i915P/i915G	Install Method: Kalyway 10.5.2 Intel DVD Bios Version: 1.9B0 Audio: CMedia 9880 LAN: Marvell Yukon 88E053 PCI-E Gigabit Ethernet Controler STATA & IDE: Works. VGA: Used nVidia GeForce 6600 PCIe	Sleep Kernel	Audio: Works with default drivers (Azalia High Definition)
MSI PM8PM -V	VIA	Install Method: Kalway 10.5.2 Intel/AMD Install methodKalway 10.5.2 Installed using 9.2.0 kernel by netkas (sleep ) BIOS version: Latest Revision: Latest Lan: need pacthes Audio: Work OOTB(line-in spdif mic: work ) USB: working b4 boot ( need usbfix ) SATA: works ( select all chipset ) IDE: works Fireware: none	Vanilla kernel not tested ( using sleep kernel )	Yes ( 2.1 channel )
MSI PM8PM -V	VIA P4M800Pro / VT8237R plus	HARDWARE USED Pentium 4 3.0GHz Memory: 1Gb DDR2 Video : S3 UniChrome Pro IGP 64mb on board Keyboard and mouse: USB both HDD : IDE Install Method: Kalway 10.5.2 Intel/AMD Installed using 9.2.0 kernel sleep SATA,IDE,AUDIO: Use appleVIAATA in DVD Lan: need external kext, use viarhine_rel.tar.gz from here Audio:to fix mono audio use AppleAC97Audio.zip from here USB: use USBfix on DVD Fireware: none	Vanilla kernel doesn't work	Audio: works Lan: works Everything works great!! Video resolution 1280x1024 just edit com.apple.Boot.plist , No acceleration en 2D and 3D and other skills cause S3 UniChrome Pro IGP driver doesn't have support on Mac,by default kalyway use VESA generic drivers =(

.

[edit] Shuttle

Hardware Name	Chipset	Notes	EFI/Vanilla kernel working	Fully Working w/o Patch
Shuttle XPC SD30G2 Plus	Intel 945GC/ICH7	Install Method: Kalyway 10.5.2 BIOS Version: Unknown Audio: Fully Supported (Audio Output Only) LAN: Fully Supported 10/100/1000 (Marvell Kalyway Driver) SATA & IDE: Both Fully Supported (No JMicron Here) USB: Fully Supported (All Six Ports) Firewire: Fully Supported (Front & Rear) Restart, Shutdown, Sleep Fully Supported with ToH Sleep Kernel	PC-EFI works	Needs Replacement AppleFrameBuffer Kext for QE/CI and Resolution Change with Intel GMA 950 Graphics
Shuttle XPC Prima SP35P2V2	Intel P35/ICH9R	Install Method: iDeneb BIOS Version: Stock Audio: Fully Supported OOB (Analog and Optical with 5.1) LAN: Fully Supported 10/100/1000 (AppleYukon2) SATA & IDE: Both Fully Supported (IDE with jmicron) USB: All ports fully operational Restart and shutdown both seem to work perfectly. Graphics: nVidia eVGA 8600 GT 256MB (256-P2-N751-TR) pci-e works perfectly with nvkush from iDeneb disc. SATA controller using Legacy mode and ACHI. iDeneb 10.5.5 works perfectly OOB.	Using vanilla kernel & Chameleon	Yes

.

[edit] Supermicro

Hardware Name	Chipset	Notes	EFI/Vanilla kernel working	Fully Working w/o Patch
X7DAL-E	Intel 5000X	Install Method: Kalyway BIOS Version: Unknown; Revision: 1.3c Audio: Not Tested, Using Sound Card LAN: Not Tested SATA & IDE: Work OOB	PC-EFI works	Audio & LAN not tested
X7DWA-N	Intel 54000	Install Method: Kalyway 10.5.1 + Kalyway 10.5.2 updater + Kalyway Kernel patch BIOS Version: Revision: 1.0b Audio: Reaktek 65535 - Works fine using the patch on Kalyway disc LAN: NOT working yet SATA & IDE: Work OOB	PC-EFI works	Audio needed patch (on Kalyway disc) Intel 82575 EB Gigabit lan adapter not working yet
Unknown		Install Method: Retail DVD & Patches BIOS Version: F2; Revision: 2.1 Revision 2 Bios F7 Audio: Works with patch LAN: Works out of the box SATA & IDE: SATA works OOB, IDE with Patch IstallGuide Complete Install guide here	Yes	No. Audio works with Patch
Asus A8N Fatal1ty SLI	nForce 4	Install Method: Zephyroth 10.5.2 rev 1 6a61fa1bc-21 (latest from uabit.com) BIOS Version: 6a61fa1bc-21 (latest from uabit.com) Audio: No Onboard Audio, using PCI card LAN: forcedepth driver was working last time i tried SATA & IDE: main drive hooked up to main IDE, storage drive hooked up to first SATA port, not added later until install was stable. dvd (slave) and dvd burner (master) are on second IDE port USB/Firewire 400: needed a general usb kext, googled "usb kext for leopard" firewire worked out of box. Do not forget to repair permissions after install, then run marvins if u got amd software updates cause firewire to stop working along with ps/2 port! clear cmos jumper fixed this, unsure of cause Use -x on first boot set master jumper on ide hdd as well Setup First boot in safemode Use kexthelper to get that usb kext installed. also google "time machine fix"	EFI & Vanilla Kernel works

[edit] TYAN

Hardware Name	Chipset	Notes	EFI/Vanilla kernel working	Fully Working w/o Patch
i5000XT S2696WA2NRF	Intel 5000X	Install Method: Leo4All v3 10.5.2 SATA HDD accidentally formatted with Apple Partition Table so system boots only with DVD. Audio: fully working with ALC888 patch from Leo4All v3 LAN: Both ports fully working without any patches SATA-2: Works OOB SAS: Works with SAS Chipset driver from Leo4All v3 About this Mac patch for Sysinfo. 1 x Firewire (front header) works 8 x USB works you will need a PS/2 keyboard for typing boot options. Conclusion: rock solid ProSystem with a Quad Clovertown Xeon, runs all Pro apps flawlessly!	PC-EFI not working, boots HDD system with Darwin from DVD	Audio needs patching, SAS-Driver has to be added

. . . . .

[edit] XFX nForce Series

Hardware Name	Chipset	Notes	EFI/Vanilla kernel working	Fully Working w/o Patch
nForce 780i 3-Way SLI	ICH9 (I think)	Install Instructions: Formatted HFS+ and then partitioned 300GB into Mac OS X Extended (Journaled) and 200GB into FAT (for Windows later) Installed using Vanilla Kernel, and using both Natit and NVInject kexts...display works fine in 1440x900 and other resolutions Complete Install and Reboot Once you reboot, go into Bios and disable second CPU core (or it will be unstable and freeze under heavy loads) If you are having root device not found issues or install can't find the HD to install on (SATA), make sure your eSATA is turned on for device 0. Interesting tip, don't plug the SATA plug into the 4 plugs by the graphics card, it has to be in the top plug on the 2 SATA plugs facing verticle out the front of the machine (if that makes any sense) Use -v on first boot if you want, but it was not necessary for me. Get kexthelperB7 to install kexts from here if you want to try and get the Lan working or fix the 1 channel audio. This was just an impatient test to see if it would work. I have a Asus P5B coming in that will hopefully work OOB with minor difficulties.	Yes	Audio needs patching if you want more than 1 channel, LAN needs patching

. . . . . . . . . . . .

[edit] Processors

[edit] AMD

Model	Notes	Recognized as	Fully Working w/o Patch
AMD Sempron LE-1100 Socket AM2	Working	1.9 GHz Unknown	Yes
AMD Sempron 3000+ Socket 754	Working	AMD Sempron(tm) Processor 3000+	Yes
AMD Athlon 64 3000+ Socket 754	Working	2GHz Unknown	Yes
AMD Athlon 64 3000+ Socket 939	Working	1.8GHz Unknown	Yes
AMD Athlon 64 3200+	Working	2GHz Unknown	Yes
AMD Athlon 64 3500+	Working	Unknown	Yes
AMD Athlon 64 3500+	Working	AMD Athlon™ 64 Processor 3500+	Yes
AMD Athlon 64 3700+ Socket 754	Working	2.4 GHz Unknown	Yes
AMD Athlon 64 X2 3600+ (90nm , Windsor)	Working	2 GHz AMD Athlon™ 64 X2 Dual Core Processor 3600+	Yes
AMD Athlon 64 X2 3600+	Working	2.10 Ghz Unknown	Yes
AMD Athlon 64 X2 3800+ @ 3.0Ghz	Working	1.94 GHz Unknown	Yes
AMD Athlon 64 X2 4000+	Working	2.1 GHz Unknown	Yes
AMD Athlon 64 X2 4000+		Intel Core 2 Duo 3.7GHz	[Voodoo Kernel v1 Rev A]
AMD Athlon 64 X2 4200+	Working	2.2 GHz Unknown	Yes
AMD Athlon 64 X2 4400+	Working	2.31 GHz Unknown	Yes
AMD Athlon 64 X2 4600+	Working	2.2 GHz Unknown	Yes
AMD Athlon 64 X2 4800+	Working	2.5 GHz Unknown	Yes
AMD Athlon 64 X2 4850e+	Working	2.5 GHz Unknown	Yes
AMD Athlon 64 X2 5000+ Black Edition (Socket AM2)	Working	2.6 GHz Unknown	Yes
AMD Athlon 64 X2 5200+	Working	2.6Ghz Unknown	Yes
AMD Athlon 64 X2 5200+(65nm Brisbane)	Working	2.7GHz AMD Athlon™ 64 X2 Dual Core Processor 5200+	Yes
AMD Athlon 64 X2 5600+	Working	2.81 Ghz Unknown	Yes
AMD Athlon 64 X2 6000+	Working	3.02GHz AMD Athlon™ 64 X2 Dual Core Processor 6000+	Yes
AMD Athlon 64 X2 6400+	Working	2.01 GHz Unknown	Yes
AMD Athlon 64 II x2 220	Working with Maverick 10.9 (test on Niresh's 10.9)	2.8 GHz	Yes, with keys (amd, arch=x86_64, npci=0x2000, another keys look at your computer)
AMD Athlon 64 LE1620 Socket AM2	Working	2.6 GHz	Yes
AMD Turion 64 X2 TL-50	Working with AMD fix with iDeneb v1 and Leo4All v4.1 for the HP dv6000 and some dv9000 series notebooks. Others may work as well.	1.6 GHz AMD Turion 64 X2 Mobile Technology TL-50	Yes, with "AMD fix" selected during install
AMD Phenom X4 9550	FULLY WORKING with AMD fix with iDeneb v1.3

[edit] Intel

Model	Notes	Recognized as	Fully Working w/o Patch
Intel Celeron 320	Working	2.4GHz Unknown	Yes
Intel Celeron D 346	Working	3,06GHz Unknown	Yes
Intel Celeron D 336	Working	2.8 GHz Unknown	Yes
Intel Celeron 420	Working	1.6GHz Unknown	Yes
Intel Celeron 430	Working	1.8 GHz Intel Core Solo	Yes
Intel Celeron M420	Working	1.6 GHz Unknown	Yes
Intel Celeron D 350	Working	2.8 GHz Unknown	Yes
Intel Pentium 4 Prescott 2.8GHz	Working	Intel 2.8Ghz Unknown	Yes
Intel Pentium 4 Prescott 3.0GHz HT	Working	3.0GHz Unknown	Yes
Pentium® 4 630 (Prescott)	Working	Unknown	Yes (ToH kernel)
Intel Pentium 4 540 (Prescott)	Working	3.2GHz Unknown	Yes
Intel Pentium 4 HT	Working	3.2Ghz Unknown	Yes
Intel Pentium 4 3GHz HT	Working	3GHz Unknown	Yes
Intel Pentium 4 3GHz	Working	3.6GHz Unknown	Yes
Intel Pentium 4 660 3.60GHz	Working	3.6 GHz	Yes (Kalyway_10.5.2; kernel_9.2_speedstep)
Intel Pentium D 2.8GHz	Working	Unknown	Yes
Intel Pentium D 3.4GHz	Working	Unknown	Yes
Intel Pentium D 820	Working	Unknown	Yes
Intel Pentium D 915	Working	2.8GHz Unknown	Yes
Intel Pentium D 9325 Presler	Working	3GHz Unknown	Yes
Intel Pentium D 930	Working	3GHz Unknown	Yes
Pentium® D 935 (Presler)	Working	Unknown	Yes (ToH kernel)
Intel Pentium D 950	Working	Unknown	Yes
Celeron Dual-Core E1200 1.6ghz	Working	1.6 GHz Intel Core 2 Duo	Yes
Pentium Dual-Core E2140 1.6ghz	Working	1.6 GHz Intel Core 2 Duo	Yes
Pentium Dual-Core E2140 1.6GHz	Clocked at 1.84GHz	1.84GHz Intel Core 2 Duo	Yes
Pentium Dual-Core E2160 1.8ghz	Working	1.8 GHz Intel Core 2 Duo	Yes
Pentium Dual-Core E2180 2.0GHz	Working	2.0 GHz Intel Core 2 Duo	Yes
Pentium Dual-Core E2200 2.2ghz	Working	2.2 GHz Intel Core 2 Duo	Yes
Pentium Dual-Core E5200 2.5GHz	Working	2.5 GHz Unknown	Yes
Intel Core Duo T2400 1.83GHz	Working	2.0 GHz Intel Core Duo	Yes
Intel Core Duo T7200	Working	2.0GHz Unknown	Yes
Intel Core 2 Duo T7250	Working	2.0 GHz Intel Core 2 Duo	Yes
Intel Core 2 Duo T7500	Working	2.19GHz Unknown, reported correctly in System Profiler + Features.	Yes
Intel Core 2 Duo E4300, Allendale	Working	1.8GHz Intel Core 2 Duo	Yes
Intel Core 2 Duo E4400, Allendale	Working	2.0GHz Intel Core 2 Duo	Yes
Intel Core 2 Duo E4500, Allendale	Working	2.2GHz Intel Core 2 Duo	Yes
Intel Core 2 Duo E4600	Working	2.4GHz Intel Core 2 Duo	Yes
Intel Xeon E5410 (Dual Quad-Core)	Working	2.33GHz, 2 Processors, 8 Cores	Yes
Intel Core 2 Duo E6300, Conroe	Working	1.86GHz Core 2 Duo	Yes
Intel Core 2 Duo E6300	Working	Core 2 Duo 2.8Ghz	Yes
Intel Core 2 Duo E6320	Working	Intel® Core(TM)2 CPU 6320 @ 2.69GHz (slightly OCed...)	Yes
Intel Core 2 Duo E6400	Working	2.13 Ghz Intel Core 2 Duo	Yes
Intel Core 2 Duo E6420	Working	2.13 Ghz Intel Core 2 Duo	Yes
Intel Core 2 Duo E6550	Working	2.33 Ghz Intel Core 2 Duo	Yes (Vanilla Kernel)
Intel Core 2 Duo E6600	Working	2.4 GHz Intel Core 2 Duo	Yes (Vanilla Kernel)
Intel Core 2 Duo E6600	Working (Overclocked)	3.0 GHz Intel Core 2 Duo	Yes (Vanilla Kernel)
Intel Core 2 Duo E6750	Working	2.67 GHz Intel Core 2 Duo	Yes (vanilla kernel)
Intel Core 2 Duo E6850	Working	3GHz Intel Core 2 Duo	Yes (Vanilla Kernel)
Intel Core 2 Duo E7200	Working	2.53 Ghz Intel Core 2 Duo E7200	Yes, works with Kalyway, iDeneb, Jas and Leo4all with Vanilla Kernel
Intel Core 2 Duo E7500	Working	2.93 Ghz Intel Core 2 Duo E7500	Yes Shown as "3 GHz Unknown" 1 cores, works with Kalyway tested by Muhammad Anil Babur Kiani
Intel Core 2 Duo E8200	Working	Intel Unknown @ 2.67 GHz	Yes
Intel Core 2 Duo E8400	Clocked at 4 GHz	Shown as "4 GHz Unknown"	Yes (Vanilla Kernel)
Intel Core 2 Duo E8500	Working	3.16GHz Intel Core 2 Duo E8500	Yes (Vanilla Kernel)
Intel Core 2 Quad Q6600	Working	2.4 GHz Unknown. Apple never adapted Q6600 on their machines and that is why it shows unknown. But the processor is working fine (at least on mine). To fix this, change "Unknown" to "Intel Core 2 Quad" in /System/Library/CoreServices/Resources/English.lproj/AppleSystemInfo.string and verify if About This Mac displays what you just edit.	Yes
Intel Core 2 Quad Q6700	Working	2.66 ghz Unknown	Yes
Intel Core 2 Quad Q8200	Working	2.33 GHz Unknown. Use the previously mentioned AppleSystemInfo.string edit (see Q6600) or use Pcwiz's osx86 tools to edit the name.	Yes (Vanilla Kernel)
Intel Core 2 Quad Q9300	Working	Unknown 2.5ghz	Yes but cannot get Temperature Monitor to show core temperatures :(
Intel Core 2 Quad Q9450 (Engineer Sample B1 version)	Working	Genuine Intel CPU 2.66GHz 3.2Ghz	Yes (Vanilla Kernel)
Intel Core 2 Quad Q9450 @ 3 GHz tray	Working	3 GHz unkown	Yes (Vanilla Kernel)
Intel Core 2 Extreme QX9650	Working	Not checked	Yes
Intel Xeon E3110	Working, Xeon version of E8400	3.0 GHz Unknown	Yes
Intel Xeon 5405	Working	2GHz Unknown	Yes
Intel Xeon 5410	Working	4GHz Unknown [is 4x2.33]	Yes

. .

[edit] Graphics Cards

Please specify if your card is AGP, Integrated, PCI or PCI-E.
Also, place chip and board manufacturer in their respective column.

[edit] AGP

[edit] ATI

Hardware Name	Board-Manufacturer	Notes	QE / CI	Resolution	Fully Working w/o Patch
Sapphire X1550 512MB	GeCube	Used NatitX1300	Yes	All	Needs Patching
X1950 Pro 256MB	GeCube	Bronya's 7280 driver for 10.5.2; BIOS flashed as a PowerColor card	Yes	All	Needs Patching
Radeon 9600 Pro 256MB	Sapphire	Impossible to get QE/CI due to PowerPC arcitecture in the required kexts.	No	All (Using Callisto b008)	No
Radeon HD 2600 Pro 512MB	Sapphire	Driver fom Kalyway 10-5-2 DVD	Yes	All	Yes
Radeon 9600 XT 128MB	Sapphire	Callisto driver 008	Yes	All	No needs patching

.

[edit] nVidia

Hardware Name	Board-Manufacturer	Notes	QE / CI	Resolution	Fully Working w/o Patch
GeForce 6200A	Zorg	Used NVInject	Unknown	Yes	Unknown
nVidia GeForce 6800 OC	nVidia	Working with NVInject 0.1.3	Both	1280x1024	No
nVidia GeForce 6800 GS OC	BFG	Working with NVInject 0.2.1, 256mb (installed from Leo4Allv2 dvd)	Both	1280x1024	No
GeForce 6800 XT 256MB AGP	Biostar	Works with NVInject and Titan	Both	All	No
GeForce 6800 XT 256MB AGP	XFX	Works with NVInject (Leopard-Only Version from NvInject[20]). No AGPgart Installed, NVCAP changed to Dual-dvi both channels setting. Dual monitor and TV-out not tested.	Both	All	No,
GeForce FX5200	Palit	Works with Brazilmac	Both	All	Yes
GeForce 6600GT 128MB	MSI	Working with NVInject 128 on Kalyway 10.5.2	both	1680x1050	yes
GeForce 6200	XFX	Working with Titan	Both	All	No, needs Titan
GeForce 4mx 440 AGP8X	Biostar	Working with Natit installer	No QE/ Software CI	All	No
GeForce 6200 256Mb AGP8X 64-bit	PNY	Works with NVinject.0.2.1_512Mb (kalyway 10.5.2)	Both	All + dual	No, needs NVinject
GeForce 6600 AGP 128MB	Inno3D	Works with NVinject 0.2.1 or NVKush	QE/CI works	Yes	No QE/CI and Resolution Change without NVinject or NVKush

.

[edit] PCI Express

[edit] ATI

Hardware Name	Board-Manufacturer	Notes	QE / CI	Resolution	Fully Working w/o Patch
Radeon X1900XTX 512MB	ATI	iDenbe 10.5.5, DPCIManager: 1002:7249 ATI Technologies Inc R580 [Radeon X1900 XT] (Primary). Had to add Natit.kext to get all resolutions up to 1920x1200	YES BOTH	1024x786	NO
Radeon X1300 Pro 256MB	ATI	Works with the NatitX1300 r1v1 Installer Download	Both	All Resolutions	No, not fully. You can just use DVI - but there's no prob to adapt it.
ASUS EAX1600 Pro 256MB	ASUS	Works with manual modify the video kext with your id]	Both	All Resolutions	fully working.
Radeon X1600P 256MB	ATI	Used Maclovin's patch from here and added the deviceID 71C2 in ATIRadeonX1000.kext after intstall	Both	All Resolutions	Yes with patch
Radeon X800GT 256MB	Sapphire	Works with Zephyroth AMD 10.5.2 Rev.1	Unknown	1280x1024	Yes
Radeon x1650 Pro 256MB	Sapphire	No DVI	Yes	All	Working with with Modbin's Driver patch. Install the Apple Graphics Update first (here is the installation file). Added: In my case, somehow installation of Modbin's package did not does the job. However, I extracted the kexts from the installation package matching with my device ID (using Pacifist) and drag those kexts to /System/Library/Extension, authenticate and replace, then I got QE/CI/Rotation and resolutions (though missing 1680x1050).
Radeon EAX1650 256 DDR3 Gamer Edition	ASUS	Fully working	Both	All	Working with with MacLovin's Driver patch (here is the installation guid). Recognized as X1600.
Radeon X1800XT 512MB	ATI	Diabolik's X1800 Natit, enter Dev ID in ATIRadeonX1000.kext	QE Works, CI Works	All Resolutions	Yes with patch
Radeon X1600XT 256Mb DDR3 (Device ID 0x71c0)	GeCube (ATI (0x1002))	ATI x1x00 Video Cards on Leopard	QE Works, CI Works	All Resolutions	Yes with patch
Radeon X1900XT 512MB	Connect3D	No Patches	QE Works, CI unknown	All Resolutions	Yes
Radeon X1900XT 512MB	Saphire	Used X1900_XT_EFI_VGA_Installer_0.1.pkg	Both work	All Resolutions	Yes
Radeon X1900XTX 512MB	ATI	No Patches	Yes	All Resolutions	Yes
Radeon X1950 Pro 256MB	Sapphire	Bronya's 10.5.2(9c16) patch here (Note: c16 works QE/CI and RC, c32 only RC)	Yes	Yes	Needs Bronya's patch.
Radeon X1950 Pro 512MB	Powercolor	Bronya's 10.5.2 patch here	Yes	Yes	Needs Bronya's patch as described.
Radeon X1950 XTX 512MB	Sapphire	Used this kext to enable full support	Yes	All Resolutions	Fully working with patch
Mobility Radeon X2300 128MB	ATI	Read [21]	Yes	1280x800x32 (not always work, depends on laptop model)	Working with patch (some mouse tearing, some video glitches)
ATI Radeon HD 2400 PRO 256MB	ATI	Used Netkas Newest Natit -->here from Feb. 26 along with editing ATIRadeonX2000.kext with Dev ID 94c3	Yes	All Resolutions	No... Need Natit Feb 26 plus you MUST use the DVI port w/ a DVI to VGA adapter to get things working with this card!
ATI Radeon HD 2600XT 256MB	Sapphire	Used Natit; DeviceID: 0x9588	Yes	All Resolutions	Yes with Natit
HD 2600XT 256MB	PowerColor	Working out of the box, both heads			Yes
ATI Radeon HD 2600XT	Sapphire	New natit.kext from Netkas as of 2/26 here	Yes	All Resolutions	No, need natit.kext from netkas (new 2/26). w00h00, sleep now works.
ATI Radeon HD 2600XT	Sapphire	New Natit.kext from Netkas required (feb/26/2008) same as Installation-Hints	Yes	All Resolutions, Dual Head, Pivot	No OOTB, needs Netkas' NATIT. Here NO sleep with Asus P5LD2 VM / edit: sleep now works for me aswell, was mobo config issue...
ATI Radeon HD 2600XT 256MB	Gigabyte	New Natit.kext from Netkas required (feb/26/2008) same as Installation-Hints and Kext Installation-Hints	Yes	All Resolutions, Dual Head, Pivot	No, needs Netkas' NATIT (26.02.2008)
ATI Radeon HD 2600XT 512MB	Diamond	Yes	Yes	All Resolutions	Works out of the box.
ATI Radeon HD 2600pro	ONDA	New ATIRadeonX2000_Leopard.pkg from here (only one package with netkas's natit 2/26/08 and white menu fix)	Yes	All Resolutions	Fully working with patch.
ATI Radeon HD 2600pro 512MB	Visiontek	Yes With ATIRadeonX2000_Leopard.pkg	Yes	All Resolutions	Works with patch.
ATI RADEON HD 2600 PRO 512	SAPPHIRE	TRIAKIS AND WHITE MENU	YES	ALL RESOLUTIONS	YES
ATI Radeon HD 2600Pro 512Mb	ASUS	White Menu Fix from and adding device id to ATIRadeonX2000.kext	Yes	All Resolutions	Yes without Natit patch
ATI Radeon HD 2600 Pro 512MB	Gigabyte	Used ATIRadeonX2000 Leopard.pkg	Both	All Resolutions	No, needs patch
ATI Radeon X2900XT	ATI	Unknown patches used	Yes	All Resolutions	Yes - Not known if patch used
ATI Radeon HD 3650 1024MB DDR2	ATI	Used the driver from this post	Both	All Resolutions	No patch, but driver from this post
Radeon HD 3650 512MB DDR2 (EAH3650 SILENT MAGIC)	Asus	Driver from this post (33). Tested with Kalyway52-4, Atkos54, Leo4Allv4.1 (DVI/VGA). A cheap (50€) and energy efficient (10W/65W), silent card - Crysis in low res still playable.	Both	All Resolutions	Works fine
Radeon HD 3650 512MB DDR2	Sapphire	Used the installer from this post, on iATKOS 2.0i. No need for aditional patching, kexts editing etc. Connected to a VGA monitor, using a dvi2vga adapter.	Both	All Resolutions	Works, with the mentioned installer.
Radeon HD 3650pro 256MB DDR2	HIS	Used the installer from this post, Dont use Kalyway Combo Update 10.5.3, or you'll get white menu bugs. Install the package, then install Jas Combo Update 10.5.3 No need for aditional patching, kexts editing etc. Connected to a VGA monitor, using a dvi2vga adapter.	Both	All Resolutions	Works, use ATI Radeon HD.pkg for 3650 version.
ATI Radeon HD 3850	Gigabyte	Latest Natit.kext and White_menus_fix	Yes	All Resolutions (Monitor Max @ 1680x1050 on both heads)	Doesn't work without patches. Also only cards with BIOS version 102 or earlier work. BIOS version 103 is not yet compatible.
ATI Radeon HD 3850	HiS	Installer found from irc.osx86.hu channel #radeonhd then White menu fix also from IRC Channel	Fully working	Yes Up to 1080p 1920x1080	No
ATI Radeon HD 3850 512MB	Powercolor	Use EFISTUDIO_EXTENDED from here	Yes	All Resolutions	minimum requirement is 10.5.5 or higher
ATI Radeon HD 3870	Sapphire	Triakis and latest 38x0 drivers from Leopard-10.5.2-AMD-EFI DVD (netkas's originals work too.)	Yes	All Resolutions (Monitor Max @ 1680x1050 on both heads)	Patches incorporated in Leopard-10.5.2-AMD-EFI DVD or elsewhere obtained netkas/triakis kexts required.
ATI Radeon HD 3870	Sapphire	Used Natit.kext	Both Work	All Resolutions	Fully working with patch
ATI Radeon HD 3870 ultimate (passiv)	Sapphire	All ok with the driver from here	Yes	All Resolutions	All fine
ATI Radeon HD 4850	Visiontek	TBA	TBA	TBA	TBA
ATI Radeon HD 4850 512MB	Sapphire	Was stuck at 1024x768 Res until I found the fix -->	Not Sure	Max 1280x1024 (on my 17")	Resolution Fix @ this thread here

. . . . . . .

[edit] nVIDIA

Hardware Name	Board-Manufacturer	Notes	QE / CI	Resolution	Fully Working w/o Patch
GeForce Go 6150	nVidia shared memory	Works with iDeneb v1, Leo4All v4.1 and Graphics fix - instructions included 128MB vram - updated in BIOS	QE - not supported / CI - software	Multiple resolutions supported	No
GeForce 8600 512MB DVI Fanless Heatsync	EliteGroup	Works with Kalyway 10.5.2 Selected nVidia inJect 512 Graphics card on Kalyway install	unknown	Multiple resolutions supported including 1920x1200	No special patch needed after selecting Nvinject 512 on install.
GeForce 6200	MSI	Works with Natit, NVinject and NVidia kexts bundled with Zephyroth 10.5.2	Not Supported	Default: 1024x768 Unable to change resolution from System Preferences, changed resolution from boot	Partially working with patch (Since QE is not supported)
GeForce 6200TC 64MB (256MB Turbo Cache)	Unknown	Used iAtkos 10.5.2. Works with NVinject 0.2.0. Good performance!	Yes, both	Default: 1024x768, resolution automaticly changed to 1680x1050 after installing NVinject.	No, use NVinject
GeForce 6200TC 512MB	XFX	Unknown Patch	Unknown	Unknown	Unknown
GeForce 6700 128 MB	MSI	tested with Kalyway 10.5.2 select NVinject-128	unknown	all resolutions	Yes, use NVinject-128MB
GeForce 6800GS 256MB	PNY	Used kexts only from Zephyroth Universal Nvidia Installer,then must manually add device IDs to Geforce.kext, NVDARESMAN, and NVDAR40HAL finall NVinject .21 with instructions in forums. google "nvidia card working in leopard" for more help.	QE/CI both work	All resolutions work	Dual monitor with extended desktop but no mirroring.
GeForce 6800GT 256MB	Leadtek	No acceleration :( -- too slow and choppy to be useful.	No	1920x1200 working	No
GeForce 6800GT 256MB	Leadtek	NVinject 0.2.1, manually add device IDs to kexts (Geforce, NVDARE~, NVDAR4~)	QE/CI both work	1680 x 1050 working fine	Fully working with patch. Dual monitor (extended desktop) works using VGA + DVI-to-VGA adapter
GeForce 7100GS 256MB	XFX	Used NVInject	Both	Only 1680 x 1050 tested, works great.	Fully working with patch
GeForce 7200GS 128MB	Asus	Nvinkjet bundled in Kalyway 10.5.1	Both	All resolutions work	Fully working with patch
GeForce 7200GS 256MB	ASUS	NVInject on Kalyway 10.5.2	Both	Yes	Working with patch
GeForce 7200GS 256MB	XFX	NVInstaller v.4.1	QE/CI both work	All resolutions work	Single display working with patch (10.5.3 works with vanilla NVinstaller v0.52); TV-out does not work at all
GeForce 7200GS 256MB Passive Cooling	PNY	NVInject	Both work	All resolutions work	Fully working with patch
GeForce 7300 LE (64 MB RAM, 256 MB shared)	Asus (OEM'd by HP)	NVInject, added to GeForce.kext, and booted with "Graphics Mode"="[email protected]"	No Hardware accelleration	All resolutions work	No QE/CI with patch
GeForce 7300LE 128MB	Digital Alliance	NVinject 0.2.1 used	Yes	All resolutions	With NVInject
GeForce 7300LE 256MB	Leadteck	NVInject work fine	Yes	All resolutions work	Fully working with patch (EFI strings recommended)
GeForce 7300GS 256MB	Gigabyte	NVInject/Natit both work fine	QE/CI both work	All resolutions work	Fully working with patch
GeForce 7300GS 256MB	Club3D	NVInject on Kalyway	Unknown	All	Fully working with patch
GeForce 7300GS 256MB	ASUS	NVinject	QE/CI both work	All resolutions work	Fully working with patch
GeForce 7300GS 256MB	XFX	NVinject	QE/CI both work	All resolutions work	Fully working with patch
GeForce 7300GS 256MB	MSI	NVinject/NVinstaller 5.2	QE/CI both work	All resolutions work in both DVI and HDMI ports	Fully working with patch
GeForce 7300GS 256MB	Chaintech	NVinject 0.2.1	QE/CI both work	All resolutions work	Yes
GeForce 7300GS 256MB	Chaintech	Kalyway Patch	Both	All resolutions work	Yes
GeForce 7300GT 256MB	BIG	NVInject	QE/CI both work	All resolutions work	Yes with NVInject
GeForce 7300GT 256MB	GIGABYTE	NVInject	QE/CI both work	All resolutions work	Yes with NVInject
GeForce 7300GT 256MB Silent Edition	NVIDIA	NVInject 0.2.0	Both	All resolutions	Yes with NVInject
GeForce 7300GT 256MB	eVGA	NVInject	Both	All resolutions	Yes with NVInject
GeForce 7300GT 256MB	Zotac	NVInject	Both	All resolutions	Yes with NVInject
GeForce EN7300GT 256MB	ASUS	Works with NVinject	Both	All
GeForce 7300GT 512MB	Pixelview	Card needs to be reflashed first	Both	All	yes, with NVinject 512mb
GeForce 7300 GT 512 Mb (No TurboCache)	XFX	Used NVInject 512 Mb 0.2.0 (Kalyway OS X86 version, EFI v8), I had to flash my card by following not so simple steps. Visit NVInject Project Website for more information.	Both	Yes	No, I had to flash my card so that Darwin recognizes it as a 512 Mb video card.
GeForce 7500LT 256MB	ASUS	NVKush, works with NVKush Istaller. VGA and DVI both work.	QE/CI work	1280 x 1024 works great	Fully working with NVKush.
GeForce 7600GS 256MB	Point of View	Used Titan	QE/CI both work	All resolutions work	Fully working with Titan
GeForce 7600GS 256MB	PowerColor	NVinject	QE/CI both work	All resolutions work	Fully working
GeForce 7600GT 256MB	PNY	NVinject	QE/CI both work	All resolutions work	Fully working
GeForce 7600GT 256MB	BIOSTAR	Works with NVinject or EFI string (Model: V7603GT21) The stock fan noise is not detectable all the time. One may need to move his hand close enough to the fan to see if it is running.	QE/CI both work	All resolutions work	Fully working
GeForce 7600GT 256MB	eVGA	Works with NVinject or EFI string (Model: 256P2N553DX) The stock fan gets really noisy during booting (post) and then becomes really quiet. It becomes noisy right before Sleep, and keeps running like so after Wake.	QE/CI both work	All resolutions work	Fully working
GeForce 7600GT 256MB	Gigabyte	NVinject or Natit	QE/CI both work	All resolutions work	Fully working
GeForce 7600GT 256MB	NVIDIA	None	QE/CI both work	All resolutions work	Yes
GeForce 7600GT 256MB	Winfast	NVInject 0.20	Both	All resolutions work	Yes
GeForce 7600GT 256MB	Eagle	NVinject or Natit	QE/CI both work	All resolutions work	Yes
GeForce 7600GT 256MB GDDR3	Zotac	NVinject	QE/CI both work	All resolutions work	Yes
GeForce 7600GT-OC VIVO 256MB	MSI	NVinject or Natit	QE/CI both work	All resolutions work	VIVO doesn't work otherwise fully functional
GeForce 7600GT Silent 256MB	MSI	NVinject (ASUS P5B-MX), EFI-string using EFIStudio (Gigabyte GA-G31M-S2L)	QE/CI both work	All resolutions work	Needs patch for resolutions and memory detection
GeForce 7600GT 256MB	XFX	NVinject, Natit or GFX-String	QE/CI both work	All resolutions work	Yes, with NVinject, Natit or GFX-String
GeForce 7600GT 256MB	eVGA	NNInject 0.1.5	QE/CI both work	All resolutions work	Yes with NVInject
GeForce 7800GT 256MB	NVIDIA	Kalyway NVIDIA patch	Unknown	Not all	Need patch from Kalyway
GeForce 7800GT 256MB	eVGA	NVinject 0.2.0 (Kalyway_10.5.2; NVinject-256). Both DVI ports recognized; have not tested dual monitor.	CI: Hardware Accelerated. QE: Supported	Dell 1702FP recognized, up to 1280 x 1024 x 75Hz x millions;	with NVinject
GeForce 7800GT OC 256MB	BFG	NVInject v0.41	Unkown	All resolutions work	Yes with patch
GeForce 7800GTX 256MB	ASUS	NVInject v0.33	Both	All	Yes with Patch
GeForce 7900GS 256MB	NVIDIA	Kalyway NVIDIA patch	Unknown	Not all	Need patch from Kalyway
GeForce 7900GT 256MB	ASUS	Kalyway NVIDIA patch	Unknown	Not all	Need patch from Kalyway
GeForce 7900GT CO 256MB	eVGA	NVInject	QE/CI both work	All resolutions work	Need to use NVInject
GeForce 7900GTO 512MB	MSI	NVInject, Needs Bios Flash, Check here for rom.	QE/CI both work	All resolutions work, TV Out untested	Need to use NVInject, BIOS flash
GeForce 7950 512MB	eVGA	NVInject	Unknown	All resolutions work	Need to use NVInject
GeForce 7950GT 512MB	NVIDIA	Needs 4 bytes of bios changed and reflashed. Used this guide and windows nvflash.	QE/CI both work	All resolutions work (only 60hz working though)	Used NVinject 2.0 and followed guide here for kext setup.
GeForce 7950GTOC 512MB	BFG	Needs Bios Flash, Check here for rom.	QE/CI both work	All resolutions work	Can use Nvinject or without if you have efi installed by following guide to create gfx string here
GeForce 8400GS 256MB	Gigabyte	Works with NVinject 0.2.1, NVCAP string with 04000000 00000300 04000000 00000007 00000000for DVI.	QE / CI , yes all	Resolution , yes all	Fully Working with Patch
GeForce 8400GS 256MB	MSI	NVinject 0.2.1 here. EFI GFX Strings work following this guide.	QE/CI both work	All resolutions work	No QE/CI without patch
GeForce 8400GS 256MB	Sweex	NVinject 0.2.1	QE/CI both work	All resolutions work	Fully working with patch
GeForce 8400GS 256MB	XFX	NVinject 0.2.0 during Kalyway 10.5.2 install (choose Nvidia 256MB) DVI output needs NVCAP edit: Right Click /System/Library/Extensions/NVInject.kext choose "Show Package Contents" Copy Info.plist to ~/Desktop Open Info.plist copy with Plist Editor Replace NVCAP string with 04000000 00000300 04000000 00000007 00000000 Save copy of info.plist and copy back to NVInject.kext contents\|QE/CI both work	All resolutions work	No QE/CI without patch (NVinject 0.2.0 during Kalyway 10.5.2 install)
GeForce 8400GS 256MB	XFX	NVinject 0.2.1 here	QE/CI both work	All resolutions work	No QE/CI without patch
GeForce 8400GS 512MB	XFX	NVinject 0.2.0 during Kalyway 10.5.2 install DVI output needs NVCAP edit. 04000000 00000300 04000000 00000007 00000000 worked.	QE/CI both work	All resolutions work	No.
GeForce 8400GS 256MB	Club3D	NVinject 0.2.0 after Kalyway 10.5.2 install (don't use 0.2.1)	QE/CI both work	All resolutions work	DVI not tested
GeForce 8400GT 512MB	eVGA	Works with NvInject	Unknown	All resolutions work	Yes
GeForce 8500GT 256MB	GIGABYTE	NvInject 0.2.1	QE/CI both work	Yes, correct widescreen res for analog only with VGA-DVI converter.	Yes, with patch
NX8500GT MTD256EH	MSI	Leo4Allv2, NvInject 0.2.1 (256MB)	QE/CI both work	All resolutions. Dual DVI with HDMI-DVI cable + DVI	Yes
GeForce 8500GT 512MB	GALAXY	NvInject 0.2.1 with 512MB patch	QE/CI both work	All resolutions work.	Yes, with patch
GeForce 8500GT 512MB (SILENT)	Sparkle	NvInject 0.2.0 (256MB Recognized)	QE/CI both work	All resolutions + DVI-I	Yes, with patch
GeForce 8500GT (SILENT)	Gigabyte GV-NX85T512HP	Used method as described here	QE/CI work flawlessly!	All Resolutions + DVI	Yes, using this method.
Nvidia GeForce 8600M GS 512MB	NVidia	Display requires driver installation and modification of info.plist to work at full resolution and with VGA-out. Mirror function still doesn't work properly, but forces main display to VGA-out. Install Universal NVidia Driver [22] Right Click /System/Library/Extensions/NVInject.kext choose "Show Package Contents" Copy Info.plist to ~/Desktop Open Info.plist copy with Plist Editor Replace NVCAP string with 04000000 00000100 02000000 00000007 00000000 Save copy of info.plist and copy back to NVInject.kext contents Change permissions of NVInject: "sudo chown -R root:wheel /System/Library/Extensions/NVinject.kext" "sudo chmod -R 755 /System/Library/Extensions/NVinject.kext" Run Disk Utility and repair permissions on disk. Delete Extension Caches and Kernel Caches before rebooting "sudo rm -R /System/Library/Extensions.mkext /System/Library/Extensions/Caches/" Reboot with -f just in case.	Yes	Yes with Driver	No: 1024x768 w/out driver All Resolutions and VGA-out with Driver Partial at 1024x768
GeForce 8600GT 256MB FATAL1TY	XFX	NvInject 0.2.1 (256MB)	QE/CI both work	All resolutions work	Yes With Patch
GeForce 8600GT 256MB Zalman	XFX	NVinstaller v.41. It works perfectly on PCIe 16x mobo (but doesn't work on PCIe 4x mobo like asrock 4coredual-sata2 for instance)	QE/CI both work	All resolutions work + dual screen	Yes with NVinstaller v.41 from leo 10.5.2 to 10.5.5, NVinstaller v.51 (vanilla choice) with leo 10.5.6.
GeForce 8600GT 256MB	EVGA	Used bf2loser's guide from here	QE/CI/GL both work, sleep (standby) works, Dual Monitor works, no mirroring	All resolutions work	Yes With Patch (Punk92) + guide (bf2loser)
GeForce 8600GT 256MB	eVGA 256-P2-N751-TR	NVKush works perfectly OOB. NVinject 0.2.0 works the same way.	QE/CI/GL all work. Dual-head works.	All resolutions work	Yes, with NVKush or NVInject.
GeForce 8600GT 256MB	Elsa Gladiac	Used 10.5.2 patch	Unknown	All resolutions work	Unknown
GeForce 8600GT 512MB Palit	Palit	NVinject 0.2.1. It works perfectly with two LCD or two VGA monitors, both DVI and VGA ports work perfectly, including when using adapters.	QE/CI both work	All resolutions work + dual screen	Yes with NVinject 0.2.1
GeForce 8800GS 384MB	eVGA	NVInstaller .41	QE/CI work	All Resolutions work	Just edit the DeviceIDs in kexts.
GeForce 8600GT 1024MB	Gainward	NVInstaller v.41	QE/CI work	All resolutions work	Yes, with patch but only 768MB and not 1024MB
GeForce 8600GT 512MB	MSI	Used johnniecarcinogen's NVInstall 0.33 to enable full features	QE/CI both work	All resolutions work	Patch needed
GeForce 8600GT 512MB	XFX	Working OOB, install NVinject V41 AFTER INSTALL to enable all resolutions and other features.	QE/CI both work	All resolutions work	Patch needed
GeForce 8600GT 256MB XXX	XFX	NVinject	QE/CI both work	All resolutions work	Yes
GeForce 8600GTS 256MB / 512MB	NVIDIA	Install in order, and clear kextcache / repair permissions after each step: Leopard Graphics Update 1.0 -> NVInstaller v.41 -> Erase and change Device IDs (GeForce.kext, NVDANV##Hal.kext, NVDAResman.ext, NVinject.kext) to "040010de".	QE/CI both work	All resolutions work	Yes
8800GT 512MB	BFG	NVInject 0.2.1 512MB	Supported	All resolutions	Both DVI output works
GeForce NX8800GT 512MB	MSI	NVInstaller V.34 here	Both	All	Just great!
GeForce 8800GT 256MB	XFX	NVinstaller0.33	QE/CI both work	All resolutions work	Yes, with patch
GeForce 8800GT 256MB	ASUS	NvInstaller 3.1 Used	QE/CI both work	All resolutions work	Yes, with patch
GeForce 8800GT 512MB (610MB overclocked)	eVGA	Works with nvinject 512 form Kalyway 10.5.2 disk.	both	all resolution / dual monitor support	Works, but only 1 res without patch (needs nvinject for full support)
GeForce 8800GT 512MB	Asus	Apple graphics update 10.5.2+NV 41.	Both	All	Just great!
GeForce NX8800GT 512M OC	MSI	NVinject	QE/CI both work	All resolutions work	Flawless
GeForce 8800GT 512MB Turbo	Gigabyte	NVinject	QE/CI both work	All resolutions	Yes
GeForce 8800GT 512MB (G92)	Gigabyte	EFI Strings & EFI v8 used. Works after Leopard Graphics Update	QE/CI both work	All resolutions work
eGeForce 8800GT KO 512MB (G92)	eVGA	NVInstaller v.33 (NVinject v0.2.1)	QE/CI both work	All resolutions work	Yes, needs NVinject v0.2.1, works post applegfx update
GeForce 8800GTS 256MB	NVIDIA	Works with BrazilMac	QE/CI both work	All resolutions work	Yes
GeForce 8800GTS 320MB	MSI	NVinject here	QE/CI both work	All resolutions work	Needs patch for resolutions and memory detection
GeForce 8800GTS 320MB	PNY	NVinject here	QE/CI both work	All resolutions work	Needs patch for resolutions and memory detection
GeForce 8800GTS 320MB	EVGA	NVinject here	QE/CI both work	All resolutions work	Needs patch for resolutions and memory detection
GeForce 8800GTS 320MB XXX Edition	XFX	NVinject-320	QE/CI both work	All resolutions work	Yes, I used Kalyway 10.5.2 DVD with NVinject-320
GeForce 8800GTS 512MB	XFX	NVinject installer v.33	QE/CI both work	All resolutions work	No
GeForce 8800GTS 512MB (G92)	ASUS	NVinject.0.2.1 here	QE/CI both work	All resolutions work	Yes, needs NVinject v0.2.1 and VRAM,totalsize has to be set manually in "info.plist" to <00000020> - 512Mb
GeForce 8800GTS 512MB (G92)	eVGA	NVinstaller v4.1	QE/CI both work	All resolutions work	Had to add 0x0600 (Device ID) to GeForce NVDANV50Hal, NVDAResman, NVinject kexts.
GeForce 8800GTS 512MB (G92)	eVGA	Edited the kext EFI string detailed in this forum post here. (Takes the kext from the 8800GT gfx card in a Mac Pro.)	QE/CI both work	All resolutions work	Do not use NVinject or NVKush. Follow the instructions here. Used on a Boot-132 system.
GeForce 8800GTS 512MB (G92)	Point of View	NVinstaller v0.33	QE/CI both work	All resolutions work (using 1920x1200)	Yes, just used NVInstaller v0.33, download here: [23]
GeForce 8800GTX 756MB	ASUS	NVInject 768MB on Zerpyroths 10.5.2 release	Both	All	Yes w/ NVinject
GeForce 8800GTX 756MB (G80)	ASUS	NVinject 0.2.0	Both	All	Yes w/ NVinject
Nvidia GeForce 8800GT 512MB (G92)	XpertVision	NVInstaller v.33 (NVinject v0.2.1)	QE/CI both work	All resolutions work	Yes
GeForce 9600GT 512MB (Silent) (G94)	ECS (Elitegroup)	Aqua Mac v2 Package and NvDarwin 1.2.3 Must upgrade to 10.5.5!	Both	All	No follow instructions here [24]
Asus nVidia GeForce EN9800GT HybridPower 512MB	Asus	GFX Strings	QE/CI Enabled	All Resolutions	Use the method stated here with the 8800GT Download Template. [25]
Zotac nVidia GeForce 9800GT 512MB	ZOTAC	NVInstaller	QE/CI/QGL Enabled	All Resolutions	Use the method NVINSTALLER]
GeForce 9800GTX 512MB (G92)	Evga	GFX Strings	Both	All resolutions work (using 1920x1200)	Installation instruction here
GeForce 9800GTX 512MB (G92)	Leadtek	GFX Strings & EFI v.8	Both	All showing in System Preferences>Display; but only 1680x1050 tested (my LCD native)	Best results with GFX Strings method described by aquamac here
GeForce 9800GX2 512MB (G92)	MSI	[Special PCI Paths, two!] GFX Strings & EFI v.8	Both	Everything works, Display prefs show all options; 1920×1200 tested (my LCD native), QE&CI Enabeld	Use GFX Strings with PC_EFI v8 and aquamac's post for ideas on the PCI paths: [26] (use google's cache if it stops working)
nVidia Quadro FX 1400 (128Mb)	HP	Kalyway Release 10.5.2 & NVinject 0.2.0 &	Both	All resolution work include Dual View Display	Patch needed in insanelymac forum (change deviceID in GeForoce.kext, NVIDANV40HAL.kext, NVinject.kext)
nVidia Quadro FX 4500 512MB (G70/G70GL)	HP	Kalyway 10.5.2 & NVinject 0.2.0	QE/CI both work	All resolutions work with dual display and mirroring	No patch needed, just shows up as "Graphics by NVIDIA" in system profiler

. . . .

[edit] Integrated

Hardware Name,(VRAM)	Board-Manufacturer	Notes	QE / CI	Resolution	Full Work / No Patch
GMA900	Intel	Working (No artifacts, so far with Sansey's method, drivers edited by Andy), but needs external monitor/dongle or wire trick (which is the easiest fix, see this)	Both	1280x800 (Changing resolutions work)	Download these drivers and install using this method (more success rates and nearly no artifacts)
GMA950	Intel	Working but some minor issues (mouse tearing)	Both	After applying kext update get only one resolution	AppleIntelIntegratedFrameBuffer.kext v1.4.20 for all resolutions
GMA3100	Intel	Working but fixed at only one resolution	No QE / CI	1024x768	No Patch needed
GMAX3100	Intel	Working perfectly	Yes	1280x800	yes, with Leopard Graphics Update
GMAX3500	Intel	Working but fixed at only one resolution	No QE / CI	1024x768	No Patch needed

[edit] Network Cards

[edit] Wireless

Interface	Standard	Device	Manufacturer	Notes	Fully Working w/o Patch
USB adapter	802.11b/g	WNC-0305USB	LevelOne	It use RTL8187 chipset. Working stable with Kalyway 10.5.2 DVD and driver from HERE or search for 87_Mac10.4_v1309.zip file.	YES! Install only the driver.
PCI Card	802.11b/g	Gigaset PCI Card 54	Siemens	Working as Airport, OOB without patching, on every current Leopard OSX86 install, even on real 10.4.11 PPC G4. Identical to "Sonnet Aria Extreme" with Broadcom chip.	YES!
PCI Card	802.11b/g	WLI2-PCI-G54S	Buffalo	Working as Airport, OOB. Tried on Kalyway 10.5.2.	Yes
Mini PCI-E Card	802.11b/g/n	4965AGN	Intel	Unknown Please Confirm	Unknown
PCI	802.11b/g/n	AEDA1A	Broadcom	Working desktop adapter by BuildSmart	Yes
PCIe X1	802.11a/b/g/n	AEDA1B	Broadcom	Working (270mbps in OS X) desktop adapter by BuildSmart	Yes
PCIe X1	802.11a/b/g/n	AEDA1C	Atheros	Working (300mbps in OS X) desktop adapter by BuildSmart	Yes
PCI Card	802.11bg	ALL0281	Allnet	Atheros Chipset, Working using this post (kexts from 10.4.8) Manufacturer ID: 168c Device ID: 0013; connect on startup with a small script	No
PCI	802.11b/g	WL-138g v2	ASUS	OOB with BCM4318 chipset	Yes
Mini PCI Express Card	802.11abg	AR5BXB6	Atheros	Working	Working with this kext: [27]
PCI Card	802.11b/g	F5D7000	Belkin	Working with Broadcom 43xx Patch included on Zephyroth DVD. Regular dropouts, cause unconfirmed.	With patch
PCI Card	802.11b/g	C54RC/C54Ri (rt2500)	Conceptronic	Working with the Tiger 10.4 driver from ralink (22-11-2006/668KB). lspci -nn: 01:09.0 Network controller 0280: RaLink RT2500 802.11g Cardbus/mini-PCI 1814:0201 (rev 01). This is the older card with the rt2500 chip, only capable of WPA. The newer card has a non osx86 supported rt61 chip (only ppc driver available) and comes with wpa2 support.	free/WEP/WPA all fine with the rt driver
PCI Card	802.11b/g	DX-BGDTC	Dynex	Working with Broadcom 43xx Patch.	With patch
PCI Card	802.11b/g	DWL-G510 (rev. A)	D-Link	For Atheros chip, use this guide: [28]	No
PCI Card	802.11a/b/g	DWL-G510 (rev. B)	D-Link	Atheros AR5005G (dev id: 168c 001a) - works w/iDeneb v1, Atheros wireless fix selected. Atheros.pkg.zip	No
PCI Card	802.11b/g	DWL-G520 rev.b	D-Link	AR5213 Chipset. working using this guide. remember to first type sudo -s in terminal before entering code and repair disk permissions afterwards. WPA not working with manual config, but try this guide to get it going (not tested). used Leo4all v3	No
PCI Card	802.11b/g	HWP-54G	Hawking	Used RT2500 "STA_CardbusPCI" Driver & Utility from Ralink Website - the Tiger version (dated 11-23-2006). Does not show up in System Profiler at all, but works if you disable ("Make Service Inactive") the wired ethernet port (en0). Also this was on an unmolested Kalyway 10.5.2 DVD Install.	No. Requires Driver, Utility, Settings tweaks.
PCI Card	802.11b/g/n	EW7728In	Edimax	Works beautifully using the Ralink 10.5 drivers at: [29] Doesn't connect as Airport, and must be configured using the Ralink Utility; configured as ethernet. Occasional dropouts, but cause unconfirmed. As a side note, this card works perfectly in Vista x64 as well, n-mode all the way!	No, see notes
PCI Card	802.11b/g/n	ENLWI-N	Encore	Works using Ralink 10.5 drivers [30]	Yes
PCI Card	802.11b/g	WMC300N	Linksys	Working OOB	Yes
PCI Card	802.11b/g/n	TEW-623PI 1.0R	Trendnet	Working OOB	Yes
PCI Card	802.11b/g/n	TEW-623PI 2.0R	Trendnet	Apparently Trendnet changed their wireless chipset in the 2.0 version of the card to Ralink RT2860. Card works if you use the drivers here Note: if you are going to buy this card off newegg you will get the 2.0 version as of 7/25/08. Also of note the ralink software is a bit clunky compared to apple's airport setup in the system prefs.	No, see note.
PCI Card	802.11n/g/b	WMP300N	Linksys	Works OOB with Kalyway 10.5.1, requires 10.5.1 kexts (IO80211Family, IONetworkingFamily, IOPCIFamily) to work with Kalyway 10.5.2. Won't run in Vista x64. Uses an Atheros 5008 chipset.	No
PCI Card	802.11 a/b/g/n	WMP300N rev.2	Linksys	Working OOB, recognized as an Apple Wireless Network Adapter. WiFi n Works fine and fast. Works also With Vista 64Bits.	Out of the Box
PCI Card	802.11g	WMP54GS v1.0	Linksys	Working out of the box both Kalyway 10.5.1 & iAtkos v1.0i; detected as Third Party Wireless Card	Yes
PCI Card	802.11g	WMP54GS v1.1	Linksys	Working OOB, detected as Airport	Yes
PCI Card	802.11b/g	WMP54G v4.0	Linksys	Working with Ralink rt2500 drivers & utillity	Yes
PCI Card	802.11b/g	WMP54G v4.1	Linksys	Not Working	No
PCI Card	802.11g	WG311T	Netgear	Working after adding device ID "pci168c,13" in original AirPortAtheros.kext	No
PCI Card	802.11g	WG311v3	Netgear	Not working. Card has a marvell 8335 chipset.	No
PCI Card	802.11bg	WG311T	Atheros	Working using this post (kexts from 10.4.8) Manufacturer ID: 168c Device ID: 0013	Working on Kalyway's 10.5.1 with 10.5.2 update
USB Adapter	802.11g	WG111v3 (Realtek's RTL8187 Chipset)	NETGEAR	Detected as an Ethernet Controller with RTL8187B Drivers from [31], and working perfectly!	Working with driver
USB Adapter	802.11g	WG111v2 (Realtek's RTL8187 Chipset)	NETGEAR	Detected as an Ethernet Controller with RTL8187L Drivers from HERE, and working perfectly!	Working with driver
USB Adapter	802.11g	Wireless G USB (v4001 Zydas Chipset)	BELKIN	Working perfectly with drivers from [32] on Leo4Allv2	Yes working with drivers
USB Adapter	802.11bgn	F5D8053	BELKIN	Working perfectly with drivers you can get from Totallybonkers here : [33]. Only tested with a 802.11g network with WEP.	Yes working with drivers
USB Adapter	802.11b/g	WL-167g	ASUS	First install Realtek Drivers from [34] (USB RT2870) Restart with -f and -v look for a ralink driver being loaded. Then go to Network in System Preferences, hopefully it will appear. Start USBWirelessUtility and check for the device status. If it doesn't work, check that the RT73USBWireless.kext is really loaded. In terminal kextstat, and look for com.Ralink.driver.RT73 (1.1.7). If it isn't there try sudo kextload RT73USBWireless.kext in terminal. You might also have to add your ip settings manually in Network Preferences by clicking the plus sign above the lock and adding an ethernet device.	It works ok now but i get some CRC errors and dropped frames, according to USBWirelessUtility. But i did download 4 gb torrents just fine...
PCI Card	802.11g	F5D7000	Belkin	Working with Zephyroth 10.5.2, select Broadcom 43xx series drivers when customising the install	Patches are on Zephyroth Install DVD
PCI Card	802.11a/b/g	AWLH4030	Airlink	Working with 10.5.2 using AirportAtheros5424.kext. Had to remove all device/manufacturer id's except the one for the specific card. [168c:0013]	No
PCI Card	802.11n	AWLH6080	Airlink	Working with 10.5.2 using Ralink driver. Connection utility kept hanging Shutdown until I cleared system caches. Cheap $45 Draft N card.	Yes
PCI Card	802.11b/g	DWA-520	D-Link	Worked with iAtkos 2.0i 10.5.2. Recognized as Airport extreme. Select "Atheros for wireless" at install. After each reboot you must reconnect manually	Yes
PCI Card	802.11b/g/n	DWA-542	D-Link	Worked with Kalyway 10.5.2-10.5.5. Recognized as Airport extreme. Works out of the box. Recognized on OEM Leopard Disk with Generic Boot 132 Loader. Works Perfect	Yes
PCI-Express Card	802.11n	DWA-556	D-Link	Working with Kalyway 10.5.1 and 10.5.2 out of box, detected as Airport Extreme. Note: sometimes drops connections, could be due to other OSX issues. Sleep function now also works out of the box, without the modified kernel - I have previously used the WG311T, and it didn't work.	Yes. Keep in mind, you must not use the modified IO80211Family.kext.
USB Adapter	802.11 b/g	DWL-G122 Version C1	D-Link	Working. Known issue: after each reeboot of OSX you need to re-insert the USB adapter in order to be correctly detected by the OS.	Working on Kalyway's 10.5.1 with drivers supplied in Dlink's CD.
USB Adapter	802.11 b/g	WUSB54GC	Linksys	Working on Kalyway's 10.5.2 DVD installation using the following steps: a. Install Prasys drivers on Kalyway 10.5.1 with WUSB54GC working. b. Use Kext Helper b7 to install 10.5.1 IO80211Familykext and 3 RT* kext. c. Install Prasys 1.2 utility.	Yes, with replug
USB Adapter	802.11 b/g	TEW-424UB V3.0R & V3.1R	TrendNet	Working with Kalyway 10.5.2 DVD and driver from Realtek. Device Versions V3.0R and V3.1R use RTL8187B chipset, Versions V2 and V2.1R use SIS163. The original version A used the Zydas chipset.	Yes, but with extra driver
USB Adapter	802.11g	US54SE II (Realtek's RTL8187 Chipset)	MSI	Detected as an Ethernet Controller with RTL8187L Drivers from HERE, and working perfectly!	Working with driver
USB Adapter	802.11g	WL-169 v1 001	Sitecom	RTL-8187B driver can be downloaded from [35]	Working with driver
USB Adapter	802.11b/g	LW053	Sweex	Ralink RT2571WF driver can be downloaded from [36]	Working with driver, however creates problems with the detection of USB devices in general
USB Adapter	802.11g	Wi-Fire	hField Technologies	Uses their own wi-fi management utility. They have updated drivers at their website. This adapter is available retail at Microcenter and online at Amazon, Newegg, etc. As of June 08, runs ~$70. Works fine with manufacturer supplied drivers, good network pickup on directional receiver.	Working with manufacture supplied OSX 10.4/10.5 driver!
PCI Card	802.11b/g	USR5417	U.S. Robotics	Works Out of Box, detected as Airport.	Yes
PCI-Card	802.11b/g	TP-Link WN650G	TP-Link	Atheros 5212 chipset. Detected as AirPort after installing drivers from OSX86Tools
PCI Card	802.11b/g	WPC1810G	MOTOROLA	Working OOB, Detected as Airport, You have to go into network settings and add it to the list. After adding works like a charm	Yes

. . .

[edit] Wired (Ethernet)

Interface	Standard	Device	Manufacturer	Notes	Fully Working w/o Patch
PCIe	10/100/1000BASE-T Ethernet	BCM5751 14e4:1677	Broadcom	iDenbe 10.5.5 - Edited kext AppleBCM5751Ethernet.kext: moved <string>pci14e4,1677</string> to bottom of array, MUST manually enter MAC address of your card in terminal; before each use: sudo ifconfig en0 ether 11:11:11:11:11:11	NO
PCI	10/100baseT	3c905x	3Com	tested several PCI 3c90x compatible 10/100 cards, some works fine (id:9055/Cyclone), some don't (id:9050/Boomerang)
USB	10/100	USB Lan adapter	Nintendo	*chipset AX88772	working out of the box
USB2.0	10/100/1000baseT	101	AirLink	Product ID: 0x1780, Vendor ID: 0x0b9, Sys. Prof. shows "USB2.0 Gigabit Adapter"	working out of the box
USB2.0	10/100/1000baseT	MB442Z/A	Apple	Works OOB with Kalyway 10.5.2	Working OOB with Kalyway 10.5.2
		RTL8110SC	Realtek	Onboard card on MSI P965 Neo2(-FI)	working out of the box
		8111B	Realtek	Onboard LAN (e.g. GA-EP35-DS4)	Working w/o patch (AFP requires RealtekR1000.kext)
		8169S	Realtek	PCI-based gigabit network card, card is Trendnet brand I think.	Working out of the box.
		PRO/100 VE	Intel	works with ASUSP4800vm.pkg also need IONetworking family.kext Download files	working 100% but require patch
		8100C	Realtek Semiconductor Corp.	Fully Working Recognized as Realtek 8139 Ethernet	working 100% without patch
		8139	Realtek Semiconductor Corp.	Works	Works OOB
		Linksys 100TX	Cisco	Fully working with Darwin Tulip kext	[37]
		DGE530T	D-Link	Works with skge-e.kext (Driver provided by D-Link doesn't work)	Works with patch
		Yukon 8056 PCIe (onboard nForce 430 chipset)	Marvell	Works with IONetworkingFamily.kext edit [38]Thread to fix	No, but easy fix :P
		Yukon 8042 PCIe	Marvell	just follow this : [39]	works fine then modified
PCI	10/100/1000 baseT	Netgear Gigabit (GA311)	Netgear	Model: GA311 Chipset: Realtek RTL8169S	Works out of the box. Bonjour works properly!
		Planet ENW-9700 Mini PCI-E Gigabit Ethernet Adapter	Planet	Chipset: Marvell Yukon2 (88E8053)	Works out of the box without patching
		Attansic L2 Fast Ethernet Adapter	Asus	Chipset: Attansic L2	Works with: AttansicL2Ethernet.kext [40]
		Atheros/Attansic L1 PCI-E Gigabit Ethernet Adapter	Asus	Chipset: Attansic L1	Works with DaemonES/MadInt driver but no function at wake up from sleep
		D-Link DFE-520TX	D-Link	Works with driver Viarhine.pkg included in iAtkos v. 2.0i DVD	Works with patch
		D-Link DFE-530TX	D-Link	Chipset: Not Sure	Doesn't Work ks out of the box w/o patch
PCI		Netgear Gigabit (FA311)	Netgear	Model: FA311 Chipset: Realtek RTL8139D	Working 100% out of the box w/o patch
PCI		FNC-0109TX	Level One	Realtek RTL8139	working out of the box
PCIe		Realtek pcie gbe family 8168		Works with realtek1000 kext

. . . . . . . . .

[edit] Sound Cards

Hardware Name (alphabetical)	Manufacturer	Notes	Fully Working w/o Patch
0202	E-MU	It requires USB 2.0. After installation of supplied drivers it works fully. Both input and output work, eventhough the E-MU 0202 control panel doen't launch on AMD machine (it doesn't affect functionality of audio interface)	Yes
ALC888 (onboard)	Realtek	Require AppleHDA Patcher v1.2 and a Linux dump or ALC888audio.mpkg (6 channel and inputs)	No, Need patch
ALC888 (onboard) Acer	Realtek	Works on Acer Aspire 5920G (Kalyway 10.5.2 install DVD)	Yes
ALC888 (onboard) Dell 530	Realtek	Require AppleHDA Patcher v1.20 and a Linux dump	No, Need patch
ALC888 (onboard) Dell 530	Intel Corporation HD Audio Controller [8086:293e] (rev 02)	Solution 1: Delete ALCinject.kext, install HDAEnabler.kext & AppleHDA.kext from here Dell_530_audio.zip (front panel headphone/mic work as well as all audio in/out) Solution 2: HDA_ICH9_ALC888.zip (front panel headphone/mic not working)	No, Need patch
ALC888 (onboard - ICH7 Shuttle SG31G2)	Realtek	Used this installer and it worked quite well. Have not tested optical out or audio in. Stereo works with this patch	You gotta patch it.
ALC888 (nForce 430 chipset onboard)	Realtek	ALCinject and ALC888 w/ 3port used on Zephyroth's 10.5.2 DVD	No, but using Zephyroth install audio works on first boot, but not set to digital default :( no leopard boot music
ALC889A	Realtek	onboard Sound. requires patch found at Rapid Share [Updated by Muhammad Anil Babur Kiani]	Note. Once patched, in/out works. Detail Description at Insanelymac
Creative Sound Blaster Live	Creative Labs	Works with kxAudio Beta driver 1.1b1 under Kalyway 10.5.2. Requires Insanelymac	Yes output works with patch. Input options are grayed out. [Tested By Muhammad Anil Babur Kiani]
Audigy 2 ZS Platinum	Creative Labs	Works with kxAudio Beta driver 1.1b1 under Kalyway 10.5.3 and 10.5.4. Requires [41]	Yes output works with patch. Input options are grayed out.
Revolution 7.1	M-Audio	Works	No, but everything works with driver found here.
Audiophile 2496	M-Audio	Doesn't Work - no intel PCI M-Audio drivers (likely due to no real Intel Macs with PCI)	No
Audiophile USB	M-Audio	Drivers from M-Audio	Yes
Firewire 410	M-Audio	Drivers from M-Audio	Yes
AureonDUAL USB	Terratec	USB Stick Soundcard. In and output both work perfectly (OOB). No driver needed.	Yes
COMPAQ Premier Sound PCI	Creative (CT5805)	Works out of the box. I took this old card from a bunch of 5 or 6 old sound cards. I tried them all and none worked. I was about to give up, but I decided to give this one a try... And it Worked!!! If you have an old Compaq Computer with a sound card, see if it has one of these sound cards.	Yes
DELTA 1010	M-Audio	Requires ENVY24 kext found here	Needs patch and then still doesn't have soundcard menu access for levels etc - but audio works.
SigmaTel 9220 (onboard)	SigmaTel	Require sigmatel 9220.pkg, working audio from line out pin Need to repair disc permission after pkg install	No, need patch
HDSP9532	RME	Works out of the box	Yes
SigmaTel 9220 (onboard)	SigmaTel	Require sigmatel 9220.pkg, working audio from line out pin Need to repair disc permission after pkg install	No, need patch
SigmaTel 9250 (onboard)	SigmaTel	Require AppleHDA Patcher v1.2 and a Linux dump	No, need patch
SL-8850	SpeedLink	works OOB	yes
UA-1EX	Edirol	Drivers from Edirol [42]	Does not work with current drivers.
AudioFire 2	Echo Audio	Works out of the box. Tested with iTunes, Logic 8 pro, Garage Band, Ableton Live and more.	Yes, with OSX driver from Echo Audio
MOTU Ultralite	MOTU	External FireWire Audio Interface. Tested with Logic 8 Pro, iTunes, Quicktime, etc -- all working flawlessly.	Works w/ standard Leopard driver from MOTU)
MOTU 828MKII firewire	MOTU	External FireWire Audio Interface. Tested with Logic 8 Pro, iTunes, Quicktime, etc -- all working flawlessly.	Works w/ standard Leopard driver from MOTU)
RME Fireface 800	RME	External FireWire Audio Interface. Works perfectly in 400 and 800 (w/ 800 card) in Logic 8, iTunes.	Works OOB with OSX drivers from RME [43])
RME HDSP 9632	RME	Internal PCI Audio Interface. Works perfectly in Logic 8, iTunes.	Works OOB with OSX drivers from RME
RME HDSP PCI rev. 1.8 + Multiface II	RME	Internal PCI HDSP rev. 1.8 + external Multiface II + external power supply. Works perfectly in Logic 8, iTunes.	Works OOB with OSX drivers from RME
RME HDSP PCI rev. 1.8 + Hammerfall DSP Digiface	RME	Internal PCI HDSP rev. 1.8 + external Hammerfall DSP digiface + external power supply. Works perfectly in Logic 8, iTunes.	Works OOB with OSX drivers from RME. It's a real pleasure, try it!!!
Apogee Duet	Apogee	External FireWire Audio Interface. Works perfectly with Firewire 400	Works OOB with OSX drivers from Apogee[44])
PSC605	Phillips	PCI sound card. must use CMI8738 driver with kext helper in order to only get two channels (only my front two speakers work, not the rear ones). neither did the center channel in surround sound.	google CMI8738 kext.
USB Gamers Headset	Logitech	USB Gamers headset with microphone. Works fine with 10.4.8, 10.4.11 and 10.5.2. When using with Leopard, the device needs to be plugged in during boot or you have to manually change the sound output to the device in the sound configuration utility. Sound is great, has a volume control on the cord that works correctly including the Apple sound graphic on the screen. CPU is not under load while playing sound and the microphone works great.	Available retail everywhere (Circuit City, Best Buy, etc) and retails around $30. Cheap sound solution for laptop users whose sound chip is not supported by OSX.
USB Stereo Headset with Microphone	Cyber Acoutics	USB Stereo Headset with Microphone. Works fine with Kalyway 10.5.2.	Yes
Tascam US-122	Tascam	Works OOB with OSX drivers from Tascam	Yes
Toshiba Multimedia Centre (USB)	Toshiba	Works OOB gives 5.1 + SPDIF and you also get LAN and 4 USB Sockets that work OOB as well no drivers needed	Yes

.

[edit] Other Accessories

Hardware Type	Hardware Name	Manufacturer	Notes	Fully Working w/o Patch
Wireless Presenter with Laser Pointer	Model # 33374	Kingston	Works out of the box USB interface	Yes
Remote Control for Front Row	Keyspan RF Remote for Front Row	Keyspan	Works out of the box USB interface	Yes
IR Reciever for Mac (Front Row, VLC, iTunes, etc)	Manta TR1 USB IR Receiver	Mira [45]	Unfortunately this only worked for me on GA-EP45-DS3L when I bought their software. You should buy it anyway if you have a Mac or OSX86 machine because it's really cool. USB interface	Seems like you have to buy the software to make this work on OSX86.
Mobile Audio Interface	Transit	M-Audio	Works with drivers from manufacturer site	No, needs official drivers
Bluetooth Dongle	BT-USB	Kinamax	Works OOB (Note Class 1 328 ft range)	Yes
Bluetooth Dongle	VP6494	Interlink	Works OOB	Yes
Bluetooth Dongle	BTD603-132	AZiO	Works OOB	Yes
Bluetooth Dongle	Logitech BT Mini-Receiver from MX5000 desktop set (keyboard & mouse)	Logitech	Works using the kext from this thread [46]	No
Bluetooth Dongle	ENUBT-C2E	Encore	Works OOB	Yes
Bluetooth Dongle	BCU32	Mobidick	Works OOB	Yes
USB Bluetooth Dongle	ABT201	Airnet	Works OOB	Yes
USB Bluetooth Dongle	USB-200	Anycom	Works OOB	Yes
USB Bluetooth Dongle	BCM XXX	Broadcom	Works OOB	Yes
USB Bluetooth Dongle	PC2PC	MSI	Works OOB	Yes
USB Bluetooth Dongle	ACB10US	Targus	Works OOB	Yes
USB Bluetooth Dongle	33902	Kensington	Works OOB	Yes
USB Bluetooth Dongle	F8T016NE	Belkin	Works OOB	Yes
USB Bluetooth Dongle	F8T012	Belkin	Works OOB	Yes
USB Bluetooth Dongle	KW-002	Kingfox	Works OOB.	Yes
USB Bluetooth Dongle	8E4178 Palladio USB BT 100	digicom	Works OOB.	Yes
USB Bluetooth Dongle	WBT100	Auvi	Works OOB	Yes
USB IrDa Dongle	F5U235ea	Belkin	Don't Work	No
Creative Fatal1ty USB Headset	HS-1000	Creative	Works OOB	Yes
DVD-RW/CD Drive	Super-WriteMaster BG69-00734A	Samsung	Generic Drive Support. LightScribe working w/ appropriate software	Yes
DVD-+RW/CDRW Drive	Super All Write LH-20A1L	Lite-On	Generic Drive Support. LightScribe working	Yes
DVD-+RW/CDRW Drive	Super-WriteMaster SH-S203B	Samsung (TSSTcorp)	Generic Drive Support.	Yes
DVD-+RW/CDRW Drive	Super WriteMaster SH-S203D	Samsung (TSSTcorp)	Generic Drive Support.	Yes
DVI to Video Adapter	Apple DVI to Video Adapter	Apple	Only Works in G5 and ATI Cards	Not working with Nvidia Cards
USB Flash Memory	CUFD-H 4G	CFD	Not working, Disappear in between copying	No
Fingerprint Reader	Unknown	Microsoft	Doesn't Work	Doesn't Work
Keyboard	Evolution Stream	Cherry	Multimedia Keys work OOB	Yes
Mouse	G7 Wireless Gaming Mouse	Logitech	Click, 4 way scroll and DPI adjustments work fine. Back button does not	Mostly
Keyboard	Aluminum flat USB Keyboard	Apple	All keys work inlcuding the Apple specific function keys. Does not work when installing Mac OS, need a PS2 keyboard	Yes
Keyboard	Mac Pro Keyboard (clear)	Apple	Everything works OOB during and after install - some usb devices may not work in attached usb ports...systems sometimes complains that there is not enough power to run the devices.	Yes
Keyboard	G15 Gaming Keyboard	Logitech	Main keyboard, numpad, USB ports, backlight, media buttons and volume control work OOTB. LCD works with this. G keys do not work.	Mostly
Keyboard	UltraX Premium Keyboard USB	Logitech	Fully works after Logitech Control Center installed	No, Cmd & Alt keys switched
Keyboard/ Gaming Keyboard	Eclipse II	Saitek	Mostly works, media buttons are screwed up: Stop button does mute/unmute Play/Pause button is volume down Forward button works Back button does back, or Play/Pause if you hold it for a second. Volume up, down, and mute keys do nothing. Number pad enter key does not work. Color change works.	No, but the important parts do.
Gaming keyboard	Lycosa	Razer	Works out of the box	Yes
Graphics tablet	Bamboo One	Wacom	Works OOB	Yes
Graphics tablet	CTE-440 Graphire 4	Wacom	Works OOB - Download latest Graphire 4 software for Mac from Wacom website for best integration with applications.	Yes
Keyboard & Mouse	Unknown	Genius	Multimedia Keys work OOB	Yes
3G Modem	E220	Huawei	Works OOB	Yes
3G Modem	E272	Huawei	Works OOB	YES
3G Modem	E172	Huawei	Doesn't work	Doesn't work
Mouse	Logitech	MX Revolution USB Cordless Laser Mouse	Works with Logitech Control Center	Yes with Logitech Control Center
Mouse	Logitech	MX Revolution	Works out of the box	Yes - Logitech Mac OSX driver install for all button and wheel functionality.
Mouse	DeathAdder Gaming Mouse	Razer	Works OOB	Yes
Mouse	Diamondback	Razer	Works OOB and you can use ProType drivers	Yes
Mouse	Copperhead	Razer	Works out of the box	Yes
PCI-E Card (1x)	SATA RAID Card 2 Ports	Rosewill RC-211 (Silicon Image Chipset)	Set the jumper to deactivate the raid bios (unless you need it). Needs OS X driver: driver	Yes
PCI Express Card	SATA RAID Card 1 Port	Silicon Image 3531	Needs OS X driver: driver patch Plist.Info with 0x35311095 PCIID	Yes
PCI Card	PATA RAID Card 2 Ports	Silicon Image Chipset 0680(A)	No Driver by Vendor / Manufacturer, Not tested any (maybe) existing driver from 3rd person	No
Scanner	CanonScan LiDE 25	Canon	Works with the driver from manufacturer's site/CD	Yes
Scanner	hp 4670	HP	Does not work with Leopard 10.5.4. It reportedly works with earlier versions of Leo and Tiger.	No
Tablet	G-Pen 4500	Genius	Works with the driver from manufacturer's site/CD (Uses Rosetta since there is no Intel version of the driver)	Yes
USB Phone	EX-03	Phone Skype	URL	Yes
USB Phone	VoIPtel 40	Hagenuk	sound in + out working OOB, keys doesn't work	No
USB Sound Card	KY - 360	3D sound (very cheap)	sound in + out 2.1	yes
TV Tuner	PCTV 110i	Pinnacle Systems	Doesn't Work	Doesn't Work
TV Tuner	PCTV Hybrid Pro Stick	Pinnacle Systems	Works with EyeTV w/o Patch	Yes
TV Tuner	WinTV HVR 950 (black)	Hauppauge	Works with EyeTV 3.0.3 ONLY	Yes
UPS	No-Break Back-UPS RS1500	APC	Works OOB	Works OOB
Webcam	from BenQ 24" Display	BenQ	Fully working	Yes
Webcam	Playstation EYE HD	Sony	Fully working OOB	Macam / iUSBcam
Webcam	LifeCam VX1000	Microsoft	Video working with macam or iUSBcam but picture quality is not good and some settings are missing. iChat recognizes the webcam but Photo booth doesn't. Hopefully next version of macam will be better.	Built-in mic not working
Webcam	LifeCam VX3000	Microsoft	Video working, unacceptable picture quality	Built-in mic not working
Webcam	QuickCam Pro 9000	Logitech	Video and mic work very well in Photo Booth, iChat, quicktime and garage band. Mic works iMovie, but video doesnt (you can still recored in quicktime or photo-booth and import.)	Video not working in iMovie
Webcam	Quickcam Messenger	Logitech	Video and microphone works with maccam. But not with ichat!!! Max. 4 frames per second (Windows/Linux/Leopard).	No
Webcam	Philips SPC500NC	Philips	Partially works with maccam	No
Webcam	PWC-30IS	Princeton	ichat not working	Not UVC, Patch needed.
Webcam	QuickCam Ultra Vision (UVC)	Logitech	Fully working OOB	Yes
Webcam	Quickam S 5500	Logitech	Fully working OOB	Yes
Webcam	Quickcam Communicate Deluxe	Logitech	Fully working OOB	Yes
Webcam	BSW20K04 (UVC)	BUFFALO	Fully working OOB But worst image ever	Yes
Webcam	BSW13K02H (UVC)	BUFFALO	Fully working OOB bad image	Yes
Webcam	RF-NBCAM	Rocketfish	Works with Drivers provided, does not work in iChat (says so right in manual)	No
Webcam	VGA Single Chip - USB (0x2600)	Pixart Imaging Inc. (0x093a)	Doesnt Work OOTB	No
Audio Interface	FCA202	Behringer	Fully working OOB	Yes
Audio Interface (Firewire)	Helix 18 Board	Phonic	Works OOB	Yes
USB Audio Speakers	Companion 5	Bose	Fully working OOB, even getting audio after original install. Zero setup.	Yes. No patch required as appropriate USB drivers are built-in.
USB Printer	MFC-240C	Brother	Works w/Mfg supplied Drivers Print/Scan/Copy all work	No, Need Drivers
USB Printer	MP 160	Cannon	Detected as MP 160, Works OOB	Use Auto Update for Drivers
USB Printer	Laser 1700	Dell	Works w/Dell 1720 OS X Drivers	No, Need Drivers or use Generic Postscript
USB Flash Card Reader/Writer	Imagemate 5in1	SanDisk	Works OOB.	Yes
FireWire 800 PCI-E	89153	DELOCK	Works OOB.	Yes
FireWire 400 PCI	BYTECC PG-FW-310 Firewire PCI Card	BYTECC	Works OOB. NO patch needed.	Yes
FireWire 400 PCI	PCI Firewire 1394 VIA 3x6P	PCtronix	Works OOB. NO patch needed. Chipset VIA VT6306	Yes
FireWire 400 PCI	SYBA IEEE 1394a Model: SD-VIA-FW1E1H	SYBA	Works OOB. No patch needed	Yes
FireWire 400/800 PCI and PCI-X	PCI-32T	SIIG	Works OOB. No patch.	Yes

@@ Line 1: / Line 1: @@
-{{Hardware_Components|10.5.2}}
+{{10.5.2}}
+This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.
+* ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
+* Please add hardware into tables.
+* This is for 10.5.2 builds only.
+''' For how to edit the Wiki, please see [http://forum.insanelymac.com/index.php?s=&showtopic=88125&view=findpost&p=627907 this] thread. Thank you! '''
 ==Motherboards==
 === Abit ===
 '''INTEL CPU'''
 {| class="wikitable" width="100%"
-!Hardware Name
+!Hardware Name (alphabetical)ƒ
 !Chipset
 !Notes
@@ Line 34: / Line 46: @@
 * VID RESOLUTION: Depends on vid card, see [http://insanelymac.com/forum/index.php?showtopic=155477 here] for hd48xx thread!
 * Install Instructions:
-*# Installed via sata dvdrom (IDE not recognised)
+*# Installed via sata dvdrom (IDE not recognised) found [http://www.greensurfshop.com/brands/Matunas.html here]
 *# Seperate Sata HDD formatted (fat32) using Installer and installed onto
 *# Vanilla kernel worked fine, don't add or change anything yet at install.
@@ Line 137: / Line 149: @@
 * Install Method: Kalyway 10.5.1 & Apple 10.5.2 Update
 * BIOS Version: 15; Revision: Unknown
-* Audio: Need patch from [http://forum.insanelymac.com/index.php?act=findpost&pid=506854 here]
+* Audio: Need patch from [http://forum.insanelymac.com/index.php?act=findpost&pid=506854 here] or [http://www.rushessay.com/essay_papers.php essay]
 * LAN: Works OOB
 * SATA & IDE: SATA works OOB, IDE works after install
@@ Line 176: / Line 188: @@
 * BIOS version: 14
 * Installation method: Leo4all v2 (10.5.2) with Vanilla Kernel 9.2.2
-* Audio (ALC 883): 2ch only so far. Works with Azalia patch from [http://forum.insanelymac.com/index.php?showtopic=36520 skippyretard]. Tried the 883 kexts from Leo4all v2 install, latest Taruga's 5.1 kext (April 24th, 2008) and skippyretard's 883 pkg with no luck. Linux reconizes ALC883 OK. Maybe the guy up here with an ALC888 has a different mobo revision.
+* Audio (ALC 883): 2ch only so far. Works with Azalia patch from [http://forum.insanelymac.com/index.php?showtopic=36520 skippyretard]. Tried the 883 kexts from Leo4all v2 install, latest Taruga's 5.1 kext (April 24th, 2008) and [http://www.greensurfshop.com/categories/Wetsuits/ mens wetsuits] skippyretard's 883 pkg with no luck. Linux reconizes ALC883 OK. Maybe the guy up here with an ALC888 has a different mobo revision.
 * Video (GMA 950): Works with GMA950 driver from the Leo4all install DVD. QE/CI enabled and no artifacts. Resolution fixed at 1024x768, I changed it editing com.apple.Boot.plist adding <string>"Graphics Mode"="[email protected]"</string>. There is some minor mouse blinking when moving over the dock, hardly noticeable.
 * LAN: Works out of the box
@@ Line 271: / Line 283: @@
 * BIOS setup options: lan bootrom enable; sata->raid->AHCI
 * Audio: Works out of the box
-* LAN: [http://www.insanelymac.com/forum/index.php?showtopic=106675&start=0&p=878087&#entry878087 works with this] add 0x054C10DE to IOPCIPrimaryMatch (Info.plist)
+* LAN: [http://forum.insanelymac.com/index.php?showtopic=106675&pid=878087&mode=threaded&start=#entry878087 works with this] add 0x054C10DE to IOPCIPrimaryMatch (Info.plist), surfing [http://www.greensurfshop.com online surf shop] ok so far, issues with filezilla
 * IDE: Full DMA speed with AppleNforceATA.kext and IOATAFamily.kext from Leo4allv4.1 (MCP67)
 * SATA: not fully tested yet (enable AHCI under SATA/RAID)
@@ Line 577: / Line 589: @@
 *# Delete or move all graphic driver: "cd /SYSTEM/LIBRARY/EXTENSIONS; rm NV*; rm ATI*"
 *# "touch /var/db/.AppleSetupDone" finally "exit"
-*# Edit /Library/Preferences/
+*# Edit /Library/Preferences/SystemConfiguration/com.apple.Boot.plist for your framebuffer screen resolution: <key>Graphics Mode</key><string>1280x1024x32</string>
-SystemConfiguration/com.apple.Boot.plist for your framebuffer screen resolution: <key>Graphics Mode</key><string>1280x1024x32</string>
 * Overall: A cheap, stable and energy efficient AMD board (19W idle with AMD 4850e/1200/0.8V, 2.5HD, PSU). Good undervolting-BIOS: 0.8V
 |EFI ok
@@ Line 723: / Line 734: @@
 | Yes
 | onboard wifi needs patching
-|-
-|P5Q3
-|Intel p45 + ICH10
-|
-'''Hardware:'''
-*Intel core2 Quad Q9550 2,83ghz
-*Geforce 9800GT 1024mb (asus build)
-*4gigs corsair RAM
-'''Install Method:'''
-*DSDT patched from winXP install with [http://www.osx86.es/?p=883 DSDTSE(win edition)]
-*BIOS settings: config sata as = AHCI, advanced cpu config = all disabled, suspend mode = S3 only, onboard devices = try disable if fail (no juzzi needed)
-*Kalyway 10.5.2 - default install options
-*Through terminal on installDVD: -Chameleon installed, -DSDT placed on HDD/root, -AppleIntelCPUPowerManagement.kext removed/renamed if present!
-*glorious welcome movie!
-(remember to try bootflags like ''-v -x -f cpus=1'')
-'''OOB:'''
-*Ethernet
-*USB (also frontpanel)
-'''Needs Patching:'''
-*Firewire
-*Sound
-*Video (more resolutions/configurability with PCWiz OSXtool EFIstring injection, but lots of gfx errors)
-moving on to SL now.
-PS. patch your own dsdt, its easy and fun ;)
-|Suspected but not tested.
-|No. DSDT applied, and some hardware patched.
 |-
 |P5QL-PRO
@@ Line 829: / Line 809: @@
 |USB(memory sticks and cards) issues: only reads if was installed at start up.
 |-
-|
 |P5KC
 |Intel P35 & ICH9
@@ Line 1,330: / Line 1,309: @@
 * BIOS Version:  1202; Revision: Unknown.
 * Audio: ADI 1988 HD Audio Device; works with Azalia driver installed from dvd.
-* LAN: Work, need nForceLAN_0.62.3.kext(edit ID).
+* LAN: Not tested.
-* SATA & IDE: SATA works with Nforce Test driver from dvd; IDE work.
+* SATA & IDE: SATA works with Nforce Test driver from dvd; IDE Not tested.
 | EFI Worked.
 | No, audio,sata needs patching,slow boot (aprox. 3-4 minutes) .
@@ Line 1,843: / Line 1,822: @@
 * IDE Suppport works
 * RAID w/ Areca 1210 Working (RAID 0)
-* [http://companyfinder.ie/ phonebook]
 |Yes. Fully supported EFI v8 + with Vanilla kernel
 |
@@ Line 2,114: / Line 2,092: @@
 *SATA: No
 *Install Method: iPC OSX8x 10.5.6 INTEL/AMD SSE2/SSE3 Universal
-*No audio for on board (VIA VT17088). Kernel Panic on installer exit, restart, shutdown, Sleep - patch did not work. You MUST disable SATA before installing as it will goto "waiting for root device" error. Sata will not work at all even with patch.| Use RTL8111 kext to install onboard Network card. AppleAzalia Audio '''''MAY''''' work for audio fix.
+*No audio for on board (VIA VT17088). Kernel Panic on installer exit, restart, shutdown, Sleep not yet tested. You MUST disable SATA before installing as it will goto "waiting for root device" error, enable after install is fine.
-|No
-|No
 |-
 |MB6497-RS
@@ Line 2,167: / Line 2,143: @@
 *Lan does not work. Needs patcher or compatible card
 *IDE Works perfect
-*SATA is NOT WORKING. ('Still waiting for root device' Error)
+*SATA untested
 *Shutdown / Restart / Sleep No problems shutting down or restarting, sleep doesn't work
 *Needs to boot into Single User Mode after install to bypass Setup screen as it crashes on transfer screen.
@@ Line 2,315: / Line 2,291: @@
 |
 * Install Method: Kalyway 10.5.1 & Kalyway Combo Update
-* BIOS Version: 3.70; Revision: Unknown
+* BIOS Version: 3.70; Revision: 1.0
 * Audio: ALC889A works with patch
 * LAN: Works OOB
@@ Line 3,095: / Line 3,071: @@
 |Intel G33
 |
-* Follow this guide [http://www.insanelymac.com/forum/index.php?showtopic=131281]
+* Follow this guide
-* Kalyway 10.5.2 works perfectly on this motherboard.
+* [http://www.insanelymac.com/forum/index.php?showtopic=131281]
-* Even Apple Final Cut 2 Studio works perfectly.
-* Tested by [http://www.facebook.com/profile.php?id=1343186070&ref=profile Muhammad Anil Babur Kiani]
 |EFI v8 + Vanilla Kernel Working
 |Audio and IDE require patching, Lan required patching too
@@ Line 3,964: / Line 3,937: @@
 |Working
 |AMD Sempron(tm) Processor 3000+
-|Yes
-|-
-|AMD Athlon 64 2800+ Socket 754
-|Working
-|1.8GHz Unknown
 |Yes
 |-
@@ Line 4,082: / Line 4,050: @@
 |2.01 GHz Unknown
 |Yes
+|-
+|AMD Athlon 64 II x2 220
+|Working with Maverick 10.9 (test on Niresh's 10.9)
+|2.8 GHz
+|Yes, with keys (amd, arch=x86_64, npci=0x2000, another keys look at your computer)
 |-
 |AMD Athlon 64 LE1620 Socket AM2
@@ Line 4,476: / Line 4,449: @@
 |Yes
 |-
+|Radeon 9600 XT 128MB
+|Sapphire
+|Callisto driver 008
+|Yes
+|All
+|No needs patching
 |}  .
@@ Line 4,566: / Line 4,545: @@
 |No QE/CI and Resolution Change without NVinject or NVKush
 |-
-|}
+|}  .
 ===PCI Express===
@@ Line 5,717: / Line 5,696: @@
 |No patch needed, just shows up as "Graphics by NVIDIA" in system profiler
 |-
-|}
+|} . . . .
 ===Integrated===
@@ Line 6,112: / Line 6,091: @@
 |LW053
 |Sweex
-|Ralink RT2571WF driver can be downloaded from [http://www.ralinktech.com/license_us.php?n=3&p=0&t=U0wyRnpjMlYwY3k4eU1ERXdMekEwTHpJd0wyUnZkMjVzYjJGa05qTTJNamMyT1RNNE5pNWtiV2M5UFQxU1ZGVlRRaUJFTnpGM0xURXVNeTR3TGpCZlZVa3RNeTR3TGpBdU1GOHlNREV3WHpBMFh6RXpD]
+|Ralink RT2571WF driver can be downloaded from [http://www.ralinktech.com/ralink/Home/Support/Macintosh.html]
 |Working with driver, however creates problems with the detection of USB devices in general
 |-
@@ Line 6,376: / Line 6,355: @@
 |Realtek
 |onboard Sound. requires patch found at [http://rapidshare.com/files/51585161/alc889a.zip.html Rapid Share]
-[http://www.uggsoutletugg.net uggs outlet]
-[http://www.baileybuttonugg.net ugg bailey button]
 * [Updated by Muhammad Anil Babur Kiani]
 |Note. Once patched, in/out works. Detail Description at [http://www.insanelymac.com/forum/lofiversion/index.php/t52254.html Insanelymac]
@@ Line 6,476: / Line 6,453: @@
 |External FireWire Audio Interface. Tested with Logic 8 Pro, iTunes, Quicktime, etc -- all working flawlessly.
 |Works w/ standard Leopard driver from [http://www.motu.com/download MOTU])
-|-
-|MOTU 8Pre firewire
-|MOTU
-|External FireWire Audio Interface.
-|Works w/ standard Leopard driver from [http://ww.motu.com/download MOTU])
 |-
 |RME Fireface 800
@@ Line 6,687: / Line 6,659: @@
 |Creative
 |Works OOB
-|Yes
-|-
-|USB DVD-RW/CDRW Drive
-|Optiarc DVD RW AD-7560S
-|BUFFALO
-|Generic Drive Support.
 |Yes
 |-
@@ Line 7,098: / Line 7,064: @@
 |Yes
 |-
-|-|} . . . . .
+|}

Tools

3.232.133.141

HCL 10.5.2

Latest revision as of 23:36, 2 October 2017

Contents

[edit] Motherboards

[edit] Abit

[edit] Albatron

[edit] AOpen

[edit] Asrock

[edit] Asus

[edit] Biostar

[edit] DFI

[edit] ECS

[edit] Elitegroup

[edit] eVGA

[edit] Foxconn

[edit] Gigabyte

[edit] Intel

[edit] Jetway

[edit] MSI

[edit] Shuttle

[edit] Supermicro

[edit] TYAN

[edit] XFX nForce Series

[edit] Processors

[edit] AMD

[edit] Intel

[edit] Graphics Cards

[edit] AGP

[edit] ATI

[edit] nVidia

[edit] PCI Express

[edit] ATI

[edit] nVIDIA

[edit] Integrated

[edit] Network Cards

[edit] Wireless

[edit] Wired (Ethernet)

[edit] Sound Cards

[edit] Other Accessories