HCL 10.5.2

From OSx86
(Difference between revisions)
Jump to: navigation, search
(→‎Asus)
(→‎ECS)
Line 673: Line 673:
 
|Via P4M800PRO, Via 8237R Plus
 
|Via P4M800PRO, Via 8237R Plus
 
|
 
|
−
* Install Method: Install JAS 10.4.8, Update with TOH RC2 to 10.5. Use Kalyway 10.5.2 Update.  
+
* Install Method: Use Kalyway 10.5.1. On first boot use -F. Then Use Kalyway 10.5.2 Update. Much faster install than TOH RC2!
 
* BIOS: Unknown
 
* BIOS: Unknown
 
* Audio: AC97 stereo fully working with patch, otherwise mono.
 
* Audio: AC97 stereo fully working with patch, otherwise mono.
−
* Graphics: Onboard video does not work. Need AGP card. Tested with Geforce 6200.
+
* Graphics: Onboard video unknown, used Geforce 6200, Core Image and Quartz supported with titan.
−
* LAN: Works with IONetworkingFamily.kext from 10.5 TOH to fix dropouts.
+
* LAN: Works with viarhine.kext
 
* SATA & IDE: IDE works, SATA works. USB Works.
 
* SATA & IDE: IDE works, SATA works. USB Works.
−
|Unknown
+
|Boot from Kalyway DVD with vanilla at F8 boot fails with ebios error.
 
|Audio, LAN Needs Patch
 
|Audio, LAN Needs Patch
 
|-
 
|-
−
|} . . . . . . . . . . . . . . .
+
|} . . . . . . . . . . . . . . . .
  
 
=== eVGA ===
 
=== eVGA ===

Revision as of 00:12, 24 March 2008

Template:10.5.2

This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for 10.5.2 builds only.

For how to edit the Wiki, please see this thread. Thank you!


Contents

Motherboards

Abit

Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
IX38 Roadster Intel X38 + ICH9R Chipset
  • Install Method: BrazilMAC 10.5.0 (Updated to 10.5.2 using Kalyway Intel combo update)
  • BIOS Version: 12
  • Audio works with: AppleHDAPatcher v1.20 + ncx5 ALC888 dump
  • LAN: Works Native
  • SATA & IDE: SATA works in AHCI mode. Does not work in RAID mode.
  • Firewire works out of the box
EFI/Vanilla kernel: Not Tested No, audio needs patching.
IP35 Pro Intel P35 + ICH9R Chipset
  • Install method: Kalyway 10.5.1 or Retail Mac OS X Server 10.5 DVD w/ PC-EFI & Combo Updater
  • Kalyway:
  • Install options: Formatted GUID, EFIv8 + Vanilla Kernel
  • Updated to 10.5.2 using Kalyway Intel combo update + Kalyway 10.5.2 kernel
  • Leopard Graphics Update v1.0 worked with no hassle
  • Bios version: 1.4, Rev. unknown
  • Bios setup: SATA set to AHCI; EIST: enabled, Disable bit: enabled
  • Audio works with: AppleHDAPatcher v1.20 + ncx5 ALC888 dump
  • SATA works as AHCI
  • IDE status: unknown
  • LAN works out of the box
  • Firewire works out of the box
  • Mac OS X Server:
  • BIOS Version: 14
  • Audio: Realtek ALC888 HD, AppleHDA patch
  • LAN: 2x OnBoard Gigabit LAN, no patch (can't remember controller-name)
  • SATA & IDE: 6 Built-In S-ATA ports in AHCI, 2 eSATA ports in AHCI (JMicron), 1 IDE port (JMicron), and 1 floppy port (JMicron). All working.
EFIv8 + Vanilla kernel No; Audio needs patching
IP35-E Intel P35
  • Install Method: Kalyway 10.5.1 & Apple 10.5.2 Update
  • BIOS Version: 15; Revision: Unknown
  • Audio: Need patch from here
  • LAN: Works OOB
  • SATA & IDE: SATA works OOB, IDE works after install
  • Optical Drive: Which one? Any weird problems with installation?
  • Shutdown / reboot works only with 10.5.1 - needs custom kernel for 10.5.2, Sleep not tested
Vanilla & EFI works Audio needs patching
AW9D-MAX Intel 975X
  • Install Method: Leopard-10.5.2-AMD-EFI.iso DVD
  • BIOS Version: 15; Board Revision: 1
  • Audio: WORKS With AzaliaAudio (from DVD)
  • LAN: Both WORK OOB
  • SATA & IDE: Works OOB (SouthBridge SiliconImage Driver from DVD used)
  • ATI Sapphire 3870 works (if you find the right combination of drivers to install from the DVD...)
EFI w/ Vanilla Kernel WORKS SiliconImage3132.kext has some ownership problems. chmod/chown + reboot makes the pain go away.
AB9 QuadGT Intel P965 & ICH8R
  • Install Method: Kalyway 10.5.1 & Combo Update
  • BIOS Version: Unknown; Revision: Unknown
  • Audio: Works with patch below
  • LAN: Unknown
  • SATA & IDE: Problem
  • Install Instructions:
    1. Partitioned as MBR
    2. Installed using Vanilla Kernel, and MBR selections under customize
    3. Complete Install and Reboot
    4. Use -x on first boot
    5. Setup First boot in safemode
    6. Use kexthelper (here) to install kexts below
    7. Install Sound Driver for Onboard sound from here
EFI & Vanilla Kernel works Audio Needs patching
IC7-G Intel 875PE
  • Install Method: Kalyway 10.5.1 with 10.5.2 KalywayComboUpdate
  • BIOS Version: 28; Revision: Unknown
  • Audio: Works OOB
  • LAN: Works OOB, no auto-detect at starup, need to disconnect and reconnect to work
  • SATA & IDE: Works OOB
Unknown LAN has auto-connect problems
. . . . . . . . . . . .

AOpen

Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
I975XA YGD i975
  • Install Method: Kalyway 10.5.1 & Update
  • BIOS Version: Unknown; Revision: Unknown
  • Audio: Works with ALHC888 and Apple HDA Patcher v1.20
  • LAN: Not tested
  • SATA & IDE: IDE works, SATA not tested
  • Wireless: Atheros 300N works well with RT2860 drive
  • -----------------------------------------------------
  • 2nd Install Method: Leopard-10.5.2-AMD-EFI
  • BIOS Version: 1.10a
  • CPU: Intel Core2Duo T7400 2,16Ghz @ 2,4 Ghz - FSB 185Mhz
  • RAM: 4GB (4 x 1GB DDR2 800Mhz)
  • Graphic adapter: ASUS EN8600T Silent 512MB - NVInstallerV.33.pkg works nice!
  • Audio: didn't work with Apple HDA Patcher v1.20 - beta4some861_880Installer.zip worked
  • LAN: works
  • Installation time for 2nd method 90 minutes
EFI works Audio needs patching
.

Asrock

Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
Asrock Conroe 1333 Intel 945GC + ICH7 Chipset
  • Install method: Kalyway 10.5.1
  • Install options: Vanilla Kernel, BOOT_efi_mbr
  • Updated to 10.5.2 using the original Apple combo update using Devin's procedure on insanelymac [1]
  • Leopard Graphics Update v1.0 normal install, works
  • Bios version: P 1.30 (1.50 not work, downgraded to 1.30 and it works)
  • SATA + PATA works
  • Onboard LAN work
  • Audio works with alc_out (2ch out only)
YES Audio needs patching
Asrock 939 Dual-VSTA Northbridge: ULi M1695 Southbridge: ULi M1567
  • Install Method: Zephyroth AMD 10.5.2 Rev.1
  • Options: 9.2 kernel
  • Audio: unknown, using usb sound card
  • LAN: Onboard Not Recognized, using realtek card
  • SATA & IDE: use this kext for full speed
  • No PS/2
unknown Onboard audio, lan and ps/2 need patching
. . . . . . . . . . . . .

Asus

Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
Maximus Formula X38 X38
  • Install Method: Kalway 10.5.1
  • BIOS Version: Unknown; Revision: Unknown
  • Audio: Using external audio, not tested.
  • LAN: Works
  • SATA & IDE: SATA works, IDE unknown
EfI & Vanilla Kernel Audio not tested, otherwise yes
P5LD2-VM DH Intel 945G and ICH7 Netkas' PC EFI V8 required to use vanilla/stock kernels 99% working out of the box, besides audio (see left). Running very stable in the end!
ASUS P5K Intel P35 + ICH9 Chipset
  • Install Method: Kalway 10.5.1 - upgraded to 10.5.2
  • BIOS Version: Unknown; Revision: Unknown
  • Audio: Using onboard with patch
  • LAN: does not work
  • SATA & IDE: SATA works, in AHCI Mode

Stable having flashed P5KR bios 403 on P5K using AFUDOS /N to force ICH9 into AHCI mode Now running for week stable with MAXMEM = 3072 in boot.plist, kept crashing without this option with 4GIG of RAM

EFI & Vanilla Kernel No. LAN doesn't work
Asus P5K-E WiFi/AP Intel P35 + ICH9 Chipset
  • WORKS OUT OF THE BOX:
  • ICH9 6x Sata ports
  • Jmicron 2x E-Sata ports
  • Firewire, USB, COM1
  • WORKS AFTER PATCHING:
  • Audio=ad1988b stereo analog only
  • Lan=marvel88e8056
  • Wifi=realtek 8187l, configured as ethernet and uses Realtek app.
  • Leopard WIFI drivers now available here!
  • WORKS FOR SOME/GIVES SYSTEM CRASHES
  • IDE/PATA ports work for me, <- "which driver do you use, btw do you also have 4gb ram?"
  • BIOS SETTINGS (Update to latest 1004 or 1006):
  • Set HDD-controllers 'ich9/jmicron' to AHCI mode, powerstate=S3
  • Processor: Enable apic2.0, disable speedstep, disable c1e, enable VT and XT
  • 4gb ram working < dependent on BIOS settings, read the forum if you have kernel panic!!!
  • Install method easy:
  • Kalyway 10.5.1 Install DVD 'select right patches, try MBR if GUID fails'
  • Updated to 10.5.2 using Kalyway ComboUpdate and kernel update.
  • iATkOS users use this thread
  • Install method advanced:
  • Retail-Leopard-DVD, GUID, pc-efi8, with retail kexts 'remove appleintelcpupowermanagment.kext, add dsmos.kext', only AUDIO/LAN/VIDEO.kexts needs to be added after that, also may add applesmbios.kext for showing right info in system profiler.
  • Retail-Leopard 10.5.2 + graphics update also work. see netkas.org for howto
YES On DVD (Kalyway) or patch (iAtkos)
P5K Deluxe WiFi Intel P35 & ICH9R
  • Install Method: Kalyway 10.5.1 & Update to 10.5.2 Netkas method
  • BIOS Version: 705; Revision: Unknwon
  • Audio: Internal AD1988B only stereo out
  • LAN1: Realtek, not tested, Shut off in bios
  • LAN2: Marvel Yukon on interl PCIe bus filly works
  • WLAN: Doesn't Work
  • SATA & IDE: Both SATA controllers fully work, IDE never tested
EFI & Vanilla Kernel Work Some problems
P5KC Intel P35 & ICH9
  • Install Method: Kalyway 10.5.1 and 10.5.2 Combo Updater
  • BIOS Version: 2602 or 0903; Revision: Unknown
  • Audio: ACL883 Tarugas patch or ALC883 driver on install DVD
  • SATA & IDE: SATA works, IDE not tested
  • LAN doesn't work.
  • Onboard WiFi works
  • For some people, install the new kernel before the update
EFI & Vanilla Kernel No. LAN doesn't work
P5KPL-VM Intel G31 & ICH7
  • Install Method: Kalyway 10.5.1, Combo Updater, Netkas method
  • Bios release: 303
  • Audio work
  • LAN don't work
  • GMA3100 Don't work yet
  • NV7600GT 256MB (with nvinject)
  • System Profiler unstable (Need patch from 10.4.10)
PC_EFI_V8 + Grub, Vanilla Kernel No
P5K-SE Intel P35 & ICH9
  • Install Method: Kalyway 10.5.1 and 10.5.2 Combo Updater
  • CPU: Enable apic2.0, disable c1e in Bios.
  • Audio: HDAPatcher with alc883 dump (only tested analog stereo and line-in).
  • LAN: Onboard doesn't work, had to use D-Link DGE530T 1GigE with skge-e.kext (Driver from D-Link website doesn't work).
  • SATA & IDE: SATA works with memory remap disabled in bios, IDE untested.
  • USB: Requires legacy support to be disabled in bios.
  • Optical Drive: USB Optical Drive
  • Graphics: Point of View Nvidia 8800GTS with nvinstaller 0.33 - 1920x1200 with full Quarts Extreme and Core Image support (QE/CI). -- Had to replace old Nvidia 6800GT because QE/CI acceleration wouldn't work in Leopard.
Yes No, onboard lan doesn't work.
P5W DH Deluxe Intel 975X & ICH7R
  • Install Method: Kalyway 10.5.1 and 10.5.2 Combo Updater
  • BIOS Version: 2602; Revision: 1.04G
  • Audio: Realtek ALC882M works
  • LAN: Marvell 88E8053 both ports work out of box
  • SATA: all port works, ICH7R IDE works, Jmicron IDE does work (non atapi device as indicated in manual)
  • Onboard WiFi does work, with realtek 8187 drivers.|
  • ez_raid ports work out of the box, natively. Raid0 works natively.
P5W DH Deluxe 975X, ICH7
  • Install Method: Retail disc image from separate installation, update to 10.5.2 via this guide. remove: AppleIntelCPUPowerManagement, AppleEFIRuntime. add: dsmos, ALCInject, Jmicron (optional). replace: AppleHDA, IONetworkingFamily, AppleSMBIOS. kexts here
  • BIOS Version: 2004 ; Revision: unknown
  • Audio: Realtek 882
  • LAN: Marvell Yukon 88E8053
  • SATA & IDE: SATA works out box, jmicron controller works with patch.
PC_EFI and Vanilla Kernel work fine BIOS setup options:

- Execute disable function -> enabled - Max CPUID -> enabled - HPet -> enabled - Memory remap feature -> enabled - Microcode update -> enabled - Acpi 2 support -> Yes - Acpi -> Enabled

P5B Deluxe (NO WiFi) Intel P965 / ICH8R
  • Install Method: Kalyway 10.5.1, Upgrade: Kalyway_Hack_10.5.2ComboUpdate
  • ComboUpdate method, be prepared for several lengthy reboots. Relax & just let it run.
  • P5B Deluxe BIOS Ver.1226 (latest available from ASUS)
  • Audio: AD1988B 8-channel High Definition Audio still not working after update (patches not tested)
  • JMicron JMB363 SATA / PATA controller NOT TESTED (2 x External SATA 3.0 Gb/s ports)
  • Intel Matrix Storage Technology (RAID) controller not recognized by OS X
  • All six (6) SATA 3.0 Gb/s internal ports tested working in ACHI (after upgrade)
  • IDE mode NOT TESTED
  • Marvell Gigabit LAN Port 1 working; Port 2 still not working (patch not tested)
  • All ten (10) USB 2.0 ports working
  • All PCI Slots working
  • Both (2) FireWire ports working (TI 1394a controller)
  • Partitioned as MBR using EFI bootloader
  • TimeMachine working
  • Software RAID drives created w/ DiskUtility still working fine after upgrade
EFI v8 + Vanilla Kernel No; Onboard Audio and LAN port 2 need patches
P5B Intel P965
  • Install Method: Kalyway 10.5.1, ComboUpdate + Kernel Patches applied in 10.5.1 or "Onetrack�s perfect install" works with ToH RC2 which is a lot of work
  • BIOS: Unknown
  • Audio: works after upgrade, needs patch in 10.5.1
  • Storage: ACHI working; Install from IDE not working, install to IDE unknown
  • LAN: Working
  • Partitioned as MBR using EFI bootloader
  • Onetrack:
  • Audio: Needs editing or patching AppleAzaliaAudio.Kext, audio in not supported
  • LAN: Works OOB
  • SATA & IDE: Works OOB (JMicron IDE works OTB with Kalyways install Disc, otherwise JmicronATA.kext needs editing)
EFI & Vanilla Kernel No, Patches applied in 10.5.1
P5B Intel P965
  • Install Method: iAtkos 1.0ir2, no luck with Kalyway
  • BIOS Version: 1202, had to downgrade using CrashFree BIOS
  • Bios options: Max CPUID disabled, Memory remap enabled, Execution bit enabled
  • Audio: works OTB
  • LAN: works OTB
  • SATA & IDE: Used SATA HDD + SATA Optical, enabled AHCI, disabled JMicron IDE
  • Partitioned with MBR with Darwin bootloader (EFI failed)
  • Non-vanilla kernel 9.2 (ToH) after Kalyway's ComboUpdate to 10.5.2
  • Reboot and shutdown are buggy, have to boot sometimes with: "-v -x -legacy" after bad shutdown/reboot.
MBR + Non-vanilla kernel Yes, no patches required
P5B Intel P965
  • Install Method: iAtkos 1.0ir2
  • BIOS Version: 1803
  • Bios options: Max CPUID disabled, Memory remap enabled, Execution bit enabled
  • Audio: works OTB
  • LAN: works OTB
  • DVD: Installed with USB2 Adapter for DVD-ROM, after install put back on IDE
  • HDD: 320 Sata HDD for Vista and Ubuntu, 100 Pata with Vantec Sata converter for OSX, enabled AHCI
  • Partitioned with MBR, used GRUB to load PC_EFI in Ubuntu
  • Vanilla kernel with 10.5.2 and all updates
  • Front USB (USB 7 and 8) not working (investigating now)
MBR and EFI + Vanilla kernel Yes, no patches required
Asus P5GC-MX Intel P965 + ICH8 Chipset
  • HD fresh install with GUID using Disc Utility
  • iATKOS v1.0i SSE3 with vanilla kernel 10.5.1
  • Used PC_EFIv8 for GUID booting
  • Updated to 10.5.2 using the original Apple combo update but using Devil's procedure on insanelymac
  • Onboard LAN doesn't work
  • Audio works with HDAPatcher ALC883.
YES Audio needs patching
Asus P5GC-MX/1333 Intel 945GC Express Chipset
  • Upgraded from Kalyway 10.5.1 to 10.5.2 using /"kalyway_hack_10.5.2ComboUpdate/"
  • Onboard LAN doesn't work
  • Audio works with HDAPatcher ALC883.
YES Audio needs patching
P5LD2-VM SE Intel® 945G / ICH7
  • Install Method: Retail DVD & web update to 10.5.2(Netkas Method)
  • BIOS Version: 0602
  • Audio ALC 882: Works with patch
  • LAN: Works out of the box
  • SATA & IDE: Works out of the box
PC-EFI-V8 + Vanilla Kernel work Audio needs Patching, and couple of kext removed/replaced.
P5GPL-X SE Intel 915PL + ICH6
  • Install method: Kalyway 10.5.1, Kalyway 10.5.2 Combo Updater & Kernel Patch
  • BIOS Version: 0301
  • Audio: ADI1986A - use AppleAzaliaAudio.kext from JaS 10.4.8 DVD (Kalyway 10.5.1 version did not work)
  • LAN: Marvell Yukon 88E8001 - use Marvell Yukon 88E8001 driver
  • SATA & IDE - both work by default
PC EFI (MBR) works, Vanilla Kernel does not No, LAN and Audio Output need patching
Asus A8N-E NFORCE4
  • Install Method: Leopard 10.5.2 Zephyroth AMD
  • BIOS Version: Unknown; Revision: Unknown
  • Audio: Install AC97 package on the install menu
  • LAN: Install Forcedeth from the install menu
  • SATA & IDE: IDE works; SATA not tested
  • Install Boot Hang Fix:
    1. Boot with the DVD
    2. Press F8, then type "-s"
    3. Type "cd /usr/standalone/i386"
    4. Type "dd if=./guid/boot1h of=/dev/rdiskXsY bs=512 count=1" (X is the disk number and Y is the partition number on which you installed Leo)
    5. Type "dd if=./guid/boot0 of=/dev/diskX bs=400 count=1"
    6. Type "./startupfiletool -v /dev/diskXsY ./boot_v8"
EFI v8 Works Audio & LAN need patching
A8N-SLI NVIDIA nForce4 SLI
  • Install Method: Zephyroth 10.5.2
  • BIOS Version: 1604; Revision: Beta
  • Audio: Realtek ALC850 (Selected AC'97 from Customize list)
  • LAN: nForce4 built-in Gbit MAC (Selected forcedeth from Customize list)
  • SATA & IDE: Installed OS onto IDE drive without problems. Also have two SATA drives in Striped RAID configured through MediaShield ROM, but the RAID showed up as two individual drives in Mac's Disk Utility during installation. Cannot access RAID even after installation.
  • Optical Drive: BenQ DW1625. During the 15 odd times I booted from the DVD to install, after the first 6 or 7 times, the installer started saying that it could not read from the disc. This was happening when it normally would check the media for errors. So, I re-burned a new disc using the same drive of the same ISO(which I had initially created from the original (now problematic) disk). The new disc worked. Maybe, just a very fragile disc. But, weird.
  • Shutdown and reboot works. Sleep gives a blank (black), unresponsive screen. Have to hard reset.
  • Had to run the installation, with the same options, multiple times for it to get it right. After a few installs, I was getting the gray screen asking me to restart the computer. I really don't know how I got around that problem. I just installed again without changing any options. Finally, when it worked, I had my ethernet cable unplugged. In the Customize list, I had chosen the nforce chipset 2/3/4/5 kext, AC '97, forcedeth, nvidia geforce 10.5.2 and nvinject 128 MB for my 6600GT graphics card. Name of volume: Leopard. I chose the EFI v8 plus MBR bootloader to make the "Leopard" volume bootable. I'm using grub to choose between my various OSes. SSE3 9.2.0 TOH Kernel chosen from the Customize list.
EFI: Since I installed using Zephyroth's 10.5.2, I'm assuming it installs EFI by default? Yes, everything works without patching. No flags needed while booting.
A8N-VM nForce 410
  • Install Method: Zephyroth Leopard 10.5.2 for AMD
  • BIOS Version: 0902; Revision: Unknown
  • Audio: ADI AD1986A works with ALC888 patch and no input
  • LAN: Works with Zephyroth patch in installation
  • SATA & IDE: Works with Zephyroth patch in installation
  • partitioned as MBR
EFI works Audio & LAN need patching
Crosshair AM2 nVidia nFocre 590 SLI MCP55
  • Install Method: Zephroth AMD SSE3 9.2.0 Kernel
  • BIOS Version: 0702; Revision: Unknown
  • Audio: Works with AzailiaHD from install DVD
  • LAN: Doesn't Work - OSX detects them with Forcedeth and they have MAC addresses however they will not detect Ethernet cables
  • SATA & IDE: Both Work
  • To avoid "Still Waiting for root device," have an IDE HD and optical drive plugged in and install on SATA
  • Needs boot hang fix if using GUID - same as Asus A8N-E NFORCE4
EFI v8 Works LAN doesn't work, Audio needs patching (reinstall AzailiaHD after 1st boot)
P5V-VM Ultra VIA P4M890
  • Install Method: Kalyway 10.5.1, Combo Updater, & Kernel Patch
  • BIOS Version: Unknown; Revision: Unknown
  • Audio: Realtek High Definition Audio, ADI AD1986A Soundmax Codec
  • LAN: Realtek RTL8201CL
  • SATA & IDE: Unknown
Unknown Audio needs patching
P5VD2-MX VIA P4M890
  • Install Method: Kalyway 10.5.1, Combo Updater, & Kernel Patch
  • BIOS Version: 1017; Revision: Unknown
  • Audio: ADI1986A; works with Azalia
  • LAN: Realtek RTL8201CL; works with viarhine.kext
  • SATA & IDE: IDE works; SATA needs patching to appleviaata.kext and add 0x53371106 0x2363197B to the device ID
  • Shutdown & Restart fully working, Sleep not tested
Unknown No, audio & lan need patching
M2N-E SLI nForce 500 MCP
  • Install Method: Zephyroth 10.5.2 AMD SSE3 9.2.0 Kernel
  • BIOS Version: 0902; Revision: Unknown
  • Audio: C-Media 6501 HD Audio Device; works out of the box, recognised as USB Audio Device
  • LAN: Works with nForce 2/3/4/5 drivers selected in install options.
  • SATA & IDE: SATA works (can do flat install to SATA HDD); IDE Works
EFI v8 Works No, lan needs patching
P5WD2 Premium i955X ICH7R
  • Install Method: ToH 10.5 > Apple combo 10.5.1 + ToH 10.5.1 kernel > Apple combo 10.5.2 via this guide + ToH 10.5.2 kernel
  • BIOS Version: 0802 (latest available); Revision: beta
  • Audio: Realtek ALC882 - works with Taruga 1.2 patch
  • LAN: Intel PCIe Gigabit LAN Controller (integrated) - works OTB; Marvell 88E8001 Gigabit LAN Controller (integrated) - turned off & not tested
  • FireWire: Texas Instruments 1394a controller (integrated) - works OTB
  • IDE: works OTB; ITE IDE controller (integrated) - turned off & not tested
  • SATA: works OTB; Silicon Image 3132 SATA controller (integrated) - turned off & not tested
  • Asus WiFi-TV PCI card (optional) - not work
EFI v8 works Audio needs patching
K8V-XE VIA K8T890
  • Install Method: Zephyroth 10.5.2 AMD > SSE3 9.2.0 kernel after Uphuck 10.4.9 1.4a drivers install (USB, Azalia, VIA Rhine)
  • BIOS Version: 0401
  • Audio: Realtek ALC660 (integrated) - works with Uphuck Azalia patch (not Zephyroth patch)
  • LAN: Realtek RTL8201CL-LF 10/100M (integrated) - works with Uphuck VIA Rhine driver
  • IDE: VIA IDE controller (integrated) - works with Zephyroth VIA drivers
  • SATA: JMicron JMB 363 SATA controller (integrated) - used as storage drive
  • Video: NV 7300GT works with NVInstaller V41
  • Install Boot Hang Fix:
    1. Boot with the DVD
    2. Press F8, then type "-s"
    3. Type "cd /usr/standalone/i386"
    4. Type "dd if=./guid/boot1h of=/dev/rdiskXsY bs=512 count=1" (X is the disk number and Y is the partition number on which you installed Leo)
    5. Type "dd if=./guid/boot0 of=/dev/diskX bs=400 count=1"
    6. Type "./startupfiletool -v /dev/diskXsY ./boot_v8"
EFI MBR works Audio & LAN need patching
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Biostar

Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
Biostar P35D2-A7 Intel P35 + ICH9
  • Installation: SATA HD fresh formatted with MBR using Disc Utility
  • Install method: Kalyway 10.5.1; vanilla kernel (both pkgs) from SATA DVD
  • Updated to 10.5.2 using the Kalyway 10.5.2 & Kalyway Kernel updates
  • Onboard LAN works out of the box
  • Audio works with Linux audio codec ALC662 + HDA Patcher.
EFI v8 + Vanilla kernel No; Audio needs patching
. . . . . . . . . . .

DFI

Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
LanParty NF4 Ultra-D nVidia nForce4 Ultra/SLI Chipset
  • Install method: Zephyroth 10.5.2
  • Installation: IDE HD formatted with MBR using Disc Utility
  • BIOS version: 2006/04/06
  • IDE: Works out of the box
  • SATA: Select Nforce 2/3/4/5 chipset driver in install
  • LAN: Select LAN drivers in install (Both Nforce & Marvell)
  • Audio: Select ac'97 audio driver in install
  • Total install time: 14 min
EFI v8 + ToH 9.2.0 SSE3 kernel Yes, as long as you select the appropriate drivers in the installer
LAN PARTY ULTRA-D nForce4 nForce 4
  • Install Method: Zephyroth 10.5.2 V1 for AMD & 9.1.0 Kernel
  • BIOS Version: Unknown; Revision: Unknown
  • Audio: ALC 850 works OOB
  • LAN: Onboard nForce 4 works OOB
  • SATA & IDE: Both work
  • Optical Drive: LG GSA-H22N BK works
  • Optical Drive 2: NEC 2510A works
  • Shutdown & Restart works, sleep untested
  • Socket 939
EFI works Yes
. . . . .

ECS

Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
GCT-M/1333 (V3.0) Intel 945GC + ICH7
  • Install Method: EFI_V8 + Retail DVD imaged to USB drive + patched. Updated to 10.5.2.
  • BIOS: 07/11/07 (08/02/18 does not boot)
  • Audio: IDT 92HD202: Not working yet.
  • Graphics: 945G/P (GMA950): Working, no tearing / artifacts.
  • LAN: RTL8101E: Works Native
  • SATA & IDE: IDE works, SATA works. No optical drives tested.
Yes Not tested
Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
P4M800PRO-M Via P4M800PRO, Via 8237R Plus
  • Install Method: Use Kalyway 10.5.1. On first boot use -F. Then Use Kalyway 10.5.2 Update. Much faster install than TOH RC2!
  • BIOS: Unknown
  • Audio: AC97 stereo fully working with patch, otherwise mono.
  • Graphics: Onboard video unknown, used Geforce 6200, Core Image and Quartz supported with titan.
  • LAN: Works with viarhine.kext
  • SATA & IDE: IDE works, SATA works. USB Works.
Boot from Kalyway DVD with vanilla at F8 boot fails with ebios error. Audio, LAN Needs Patch
. . . . . . . . . . . . . . . .

eVGA

Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
eVGA 680i SLI 122-CK-NF68-A1 nVidia nForce6 680i SLI Chipset
  • Install method: Kalyway 10.5.1 + Kalyway 10.5.2 combo update + Apple Graphics update 1.0
  • Installation: IDE HD w/ GUID
  • BIOS version: P32
  • IDE: Works out of the box
  • SATA: read works/no write: nForce driver in the works
  • LAN: Marvell 88E1116, beta driver still in the works
  • Audio: Fully working w/ ALC885 codec using Taruga's HDApatcher v1.20
EFI v8 + modbin 9.2 No, patch audio, use PCI Nic for stability, screen saver/restart/shutdown perfect, sleep no good
. . . . . . .

Gigabyte

Hardware Name (alphabetical) Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
GA-EP35-DS3R v2.1 Intel P35
  • Install Method: Kalyway + Apple Update 10.5.2 + Adobe Graphic Update
  • BIOS Version: F2
  • Audio: Works with AppleHD patch (2.1 and digital)
  • LAN: Works out of the box
  • SATA works in AHCI mode (NCQ working)
Yes. Fully supported EFI v8 + Vanilla kernel No. Audio need patch.
GA-EP35-DS3R Intel P35 & ICH8
  • Install Method: iATKOS v1.0i, Brazilmac had problems with Rosetta apps
  • BIOS Version: F12; Revision: 3.3
  • Audio: Audio888 installer package from Skippyretard and AppleHDA patcher v1.20
  • LAN: No, edit 8053 to 8056 and 62 to 64 in the Apple Yukon2 kext
  • SATA & IDE: Only 2 SATA ports work
Unknown No, Audio & LAN need patches
GA-EP35-DS4 Intel P35
  • Install Method: Retail DVD & Patches
  • BIOS Version: F2; Revision: 2.1 Revision 2 Bios F7
  • Audio: Works with patch
  • LAN: Works out of the box
  • SATA & IDE: SATA works OOB, IDE with Patch

insallGuide

  • Complete Install guide here
Yes No. Audio works with Patch
GA-P35-DS3 Intel P35
  • Install Method: Kalyway 10.5.1 + Patched Kalyway Update 10.5.2 + Patched Kalyway Kernel 10.5.2 + Graphic Update
  • BIOS Version: F12
  • Audio: Works with AppleHD patch (2.1 and digital and input)
  • LAN: Works out of the box
  • SATA Support works without AHCI
  • IDE Suppport works
Yes. Fully supported EFI v8 + without Vanilla kernel No. Audio needs patch. Bonjour services do not work out of the box. Shutdown does not work with vanilla kernel.
GA-P35-DS3 Intel P35
  • Install Method: Kalyway 10.5.1 & Kalyway Combo Updater
  • BIOS Version: F12; Revision: 2.1
  • Audio: Works with HDA ICH9 ALHC888 works & Apple HDA Patcher v1.20
  • LAN: Works OOB
  • SATA & IDE: SATA works with IOATAFamily.kext V1.1
  • Optical Drive: LG GSA-H55L IDE (Fully Working with IDE to SATA Cable )
  • Shutdown & Sleep don't work, restart unknown
EFI v8 & Vanilla Kernel No, Audio needs patching
GA-P35-DS3L Intel P35
  • Install Method: Kalyway + Apple Update 10.5.2 + Graphic Update
  • BIOS Version: F5
  • Audio: Works with AppleHD patch (2.1 and digital)
  • LAN: Works out of the box
  • SATA & IDE: SATA works OOB, IDE not working (don't use AHCI)
Yes. Fully supported EFI + Vanilla kernel No. Audio doesn't work
GA-P35-DS3P Intel P35 + ICH9R
  • Install Method: Kalyway 10.5.1, Kalyway 10.5.2 Combo Updater & Kalyway Kernel update
  • BIOS Version: F8; Revision: 2.0
  • Audio: works with ALCinject.kext and AppleHDA.kext
  • LAN: LAN working out of the box
  • SATA & IDE: SATA works out of the box, using AHCI
Yes. Fully supported EFI + Vanilla kernel No; Audio need patching
GA-P35C-DS3R Intel P35 + ICH9
  • Install Method: Kalyway + Apple Update 10.5.2 + Graphics Update
  • BIOS Version: F4
  • Audio: Works with patched AppleHDA + ALCinject (mic works)
  • LAN: Works out of the box, but sourceforge Realtek R1000 driver is better (fixes Bonjour)
  • SATA: SATA works out of the box, using AHCI on ICH9 controller (JMicron disabled)
Yes. Fully supported EFI + Vanilla kernel No. Audio needs patch
GA-P35-DS3R Intel P35 + ICH9R
  • Install Method: Kalyway 10.5.1 + Kalyway Upd. 10.5.2 + Vanilla kernel 9.2.0 + Graphics Upd.
  • BIOS: Sata native mode, 64 bits enabled, Vanderpool enabled, Sleep S0 (S3 doesn't work)
  • Audio: works with patched AppleHDA + ALCinject
  • LAN: works out of the box
  • SATA: works out of the box, using ICH9R without AHCI (JMicron disabled)
Yes. Fully supported EFi + Vanilla kernel (kernel 9.2.2 ok) No. Audio needs patch
GA-P35C-DSL Intel P35
  • Install Method: Kalyway 10.5.1 & Kalyway Combo Update
  • BIOS Version: F6; Revision: 2.0
  • Audio: ALHC888 and Apple HDA Patcher v1.20
  • LAN: Doesn't always work
  • SATA & IDE: Both fully working
  • Optical Drive: LG GSA-H22N BK (Fully Working)
  • Shutdown & Reboot fully working, Sleep not tested
EFI v8 + Vanilla Kernel No. Audio needs patch
GA-P31-DSL Intel P31 + ICH7
  • Install Method: BrazilMac Patched DVD & MBR Partition
  • BIOS Version: F8; Revision: Unknown
  • Audio: Realtek ALC888 works with AppleHDA Patcher
  • LAN: RTL 8111B works OOB
  • SATA & IDE: Works OOB
EFI v8 Works Audio needs patching
GA-G33M-DS2R Intel G33
  • Install Method: Kalyway 10.5.1 + manual Update to 10.5.2 + Graphic Update
  • BIOS Version: F6
  • Audio: Works with AppleHDA patch (stereo out, front panel, digital, mic, line in)
  • LAN: Works out of the box
  • SATA 6 ports works AHCI
  • IDE works
  • Thysm00 Guide
Yes. Fully supported EFI v8 + Vanilla kernel No. Audio needs patch.
GA-K8NF-9 NVIDIA nForce4 (4X) MCPs
  • Install Method: Zephyroth Leopard 10.5.2 AMD
  • BIOS version: Unknown
  • Audio: Realtek ALC850 Audio AC'97 Codec : Works with Kext but, may works out of the box.
  • LAN: Works out of the box
  • SATA: Works out of the box
  • IDE: Not tested
Yes Yes
GA-K8N51GMF-9 NVIDIA nForce 430
  • Install Method: Zephyroth Leopard 10.5.2 for AMD
  • BIOS Version: F7; Revision: Unknown
  • Audio: Yes (Stereo) works with "beta4some860_880"
  • LAN: Works with forcedeth-nockd.kext
  • SATA & IDE: Does SATA work? Any options in BIOS or Patches? Same thing with IDE
  • Restart & Shutdown,Sleep fully working
Unknown LAN and Audio needs patch
GA-P965-DQ6 Intel P965 + ICH8R
  • Install Method: Kalway 10.5.1, Kalyway 10.5.2 Combo Updater & Kalyway Kernel update
  • BIOS Version: F11; Revision: 1.0
  • Audio: Realtek ALC888DD; Not Tested
  • LAN: Marvell 8053, works OOB
  • SATA & IDE: Both work OOB
  • Computer wakes from sleep, keyboard doesn't work after that
Unknown Yes, audio not tested
GA-P965-DS3 Intel P965
  • Install Method: Kalway 10.5.1 & 10.5.2 Combo Updater
  • BIOS Version: F10; Revision: Unknown
  • Audio: Works
  • LAN: Works
  • SATA & IDE: Works
Unknown Yes
GA-965P-S3 Intel P965 + ICH8
  • Install Method: Kalway 10.5.1, Kalyway 10.5.2 Combo Updater & Kalyway Kernel update (vanilla) or iATKOS and patch (see below)
  • Kalyway:
  • Options: EFI_guid, Natit, ALC883, Vanilla kernel +fix
  • BIOS Version: F12; Revision: 1.0
  • Audio: ALC883; Headphones work (only front panel jack), Line out not working, Digital out not tested
  • LAN: Marvell 8056 Gigabit; Works OOB
  • SATA & IDE: (both set to AHCI) Only Orange connectors (not purple); Works OOB
  • iATKOS:
  • Audio: Works OOB
  • LAN: Need to repatch after update, save AppleYukon2.kext before upgrade and replace this file after upgrade, reboot twice
  • Install iATKOS 1.0i and then upgrade to 10.5.2 with guide here
Yes Yes, Audio: only headphone, lineout and digital showing in preferences: not fully tested
GA-945GCM-S2C Intel 945G + ICH7 Chipset
  • Install method: Kalyway 10.5.1 Install DVD
  • Update to v10.5.2: Netkas method
  • kernel 9.2.2 ok
  • BIOS version F4, Rev. 1.0
  • Audio requires AppleAzaliaAudio.kext
  • LAN working out of the box
  • SATA and IDE working out of the box
  • Certain applications (i.e. FireFox) cause Intel GMA950 glitches
EFI + Vanilla kernel 9.2.2 working No; Audio needs patching
GA-945GCM-S2L Intel 945G + ICH7 Chipset
  • Install method: Kalyway 10.5.1 Install DVD
  • Update to v10.5.2: Kalyway 10.5.2 Combo update + Apple update + Kalyway 10.5.2 Kernel update
  • Audio requires Azalia_Out.kext on Kalyway
  • LAN not working out of the box need to use RTGMac_v1.1.6.zip
  • SATA and IDE working out of the box
EFI + Vanilla kernel working No; Audio/LAN needs patching
GA-945GCMX-S2 Intel 945GC + ICH7
  • BIOS version: F4, Rev. 6.6
  • (1) Installation (v10.5.0) method: Onetrack method with EFI v8.0 on GPT using iGuru guide
  • Update to v10.5.2: Netkas method
  • Audio (ALC 888): Works with skippyretard patch
  • Video (GMA 950): Works with modified AppleIntelIntegratedFramebuffer.kext from BrazilMAC guide
  • LAN: Works out of the box
  • IDE and SATA: Works out of the box
  • ----
  • (2) Installation method: iATKOS
  • Audio: Works OOB
  • LAN: Works OOB
  • SATA & IDE: Works OOB
Yes No. Audio and video need patches
GA-945P-S3 Intel 945P + ICH7
  • Install Method: iATKOS V1.0i & Kalyway 10.5.2 Updater
  • BIOS Version: Unknown; Revision: 3.3
  • Audio: Realtek ALC888 8 Channel Audio works
  • LAN: Realtek 8111B Gigabit Ethernet works
  • SATA & IDE: Both work
Unknown Yes
GA-8I865GVMK F9 (Socket 478) Intel® 865G GMCH & ICH5
  • Install Method: Kalyway
  • Audio: Realtek ALC655 works
  • LAN: Intel PRO/100 VE Ethernet Controller works
  • SATA & IDE: Unknown
  • Optical Drive: Unknown
Unknown Unknown
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Intel

Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
DG33FB Intel G33
  • Install method: Kalyway's 10.5.1 DVD + Kalyway's hacked Combo update 10.5.2 and Vanilla Kernel 9.2
  • BIOS Version: DPP3510J.86A.0326
  • Audio: Works with AppleHDA & ALC888 codec dump (Including BIOS Update herefrom Intel)
  • Onboard LAN does not work
  • USB, Firewire work out of the box
  • IDE works with Patching
  • SATA works in AHCI Mode
EFI v8 + Vanilla Kernel Working Audio and IDE require patching
D975XBX2KR (BadAxe2) Intel 975X Express
  • Install Method: BrazilMac 10.5 + EFI v8 MBR, Vanilla kernel
  • BIOS Version: 2813 [BX97520J.86A]; Revision: Unknown
  • Audio: Need to patch with AppleHDAPatcher_v1.16 (STAC9274D)
  • LAN: Need to replace IONetworkingFamily.kext from 10.4.9 + EFI strings to fix various UUID errors and TimeMachine
  • SATA & IDE: Work OOB
Yes, both work
D975XBX2 Intel 975X & ICH7DH
  • Install Method: iATKOS_v1.0i vanila + 10.5.2 direct update (Netkas)
  • SATA AHCI (GUID Partitions), IDE, USB, FireWire and Lan fully working.
  • GF7600GT as EFI (string added): no injectors
  • Sigmatel STAC9274D audio working with Taruga's AppleHDAPatcher 1.16
  • Onboard Marvel88SE61XX not working
Yes (pc_efi_v8 + pc_efi_v7.4) Sigmatel Audio requires patch
Intel D945GNT Intel® 945G Express Chipset
  • Install Method: All
  • Audio (Sigmatel 9220) works with patch 9200.pkg
  • LAN works with ASUSP4800vm.pkg {for tiger add product ID to AppleIntel8255x.kext}{for leopard need IONetworking family.kext}
  • SATA & IDE works
Efi is working Vanilla not tested
  • Sigmatel Audio require patch
  • Intel® Pro/100ve requires driver
945GNTKLR Intel 945G
  • Install Method: Kalyway 10.5.1 & Combo Updater
  • BIOS Version: Unknown; Revision: Unknown
  • Audio: HDA Intel 9221 & Apple HDA Patcher v1.20
  • LAN: Works OOB
  • SATA & IDE: SATA & IDE work
  • Video: GMA950 works by replacing current appleIntelIntegratedFramebuffer.kext with version 1.4.20
  • Optical Drive: Pioneer 111D fully working
EFI works, Vanilla doesn't Audio needs patching
D945GTP Intel 945G
  • Install Method: iATKOS or Kalyway 10.5.1 with Kalyway 10.5.2 update
  • BIOS Version: Unknown; Revision: Unknown
  • Audio: Sigmatel 9220 needs patch
  • LAN: Intel PRO 10/100 needs patch
  • SATA & IDE: SATA works, IDE not tested
Unknown No
D915GAV Intel 915G
  • Install Method: Kalyway 10.5.1 and modified 10.5.2 Combo Update. See gizmoarena for more info
  • BIOS Version: Unknown; Revision: Unknown
  • Audio: Realtek ALC882 HD works with Azaila patch
  • LAN: SURECOM EP320X-R (Realtek chipset) works OOB
  • SATA & IDE: Works OOB
PC-EFI Audio Needs Patching
D865GLC Intel 865
  • Install Method: Brazilamc Patched DVD with Kalyway 10.5.2 Updater & Brazilmac Post-Patch
  • BIOS Version: Unknown; Revision: Unknown
  • Audio: Works OOB
  • LAN: Works OOB
  • SATA & IDE: IDE works, SATA not tested
No Yes
. . . . . . . . . . . . . . . . . . . . .

Jetway

Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
Jetway 945GCDMS-6H Intel 945GC + ICH7 Chipset
  • Install Method: Kalyway 10.5.1 Installed and Update to Kalyway Hack 10.5.2 Combo Update
  • BIOS Version:; BIOS Revision A03
  • Audio: Onboard Realtek ALC883 Works out of the Box (Audio out and Mic in)
  • LAN: Realtek 8100C Works out of the Box detected as Realtek 8139
  • SATA & IDE: SATA and IDE Works out of the Box
Works Perfectly Yes
. .

MSI

Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
P965 Neo2 -FI Intel® P965 Chipset/Intel® ICH8 Chipset
  • Install Method: Leo4All 10.5.2 vanilla, EFI MBR
  • Onboard audio disabled (b/c of USB external sound here)
  • BIOS 3.8 WORK! (Only when DOT is CPU ONLY and set to 1%)
  • LAN, SATA work(tested with 1 HDD,1 DVD-RW), IDE not tested
EFI+Vanilla working with E8200 Onboard audio need patch
P965 Neo2(-FI) Intel 965/ICH8 Chipset
  • Install Method: Kalyway 10.5.1 EFI Guid (updated to vanilla 10.5.2
  • Audio needs ALC888+Azalia Driver from here
  • BIOS Ver: 3.7 (3.8 DOES NOT WORK!)
  • The rest all works out of the box except IDE and the 5th SATA port because its on the same chip as IDE (Marvell ® 88SE6111)
  • link to motherboard overview
EFI+vanilla working on my Core 2 Quad Q6600 No, Everything works, except IDE and audio needs ALC888+Azalia patch
P965 Neo Intel 965 Chipset with ICH8 Southbridge
  • Install Method: Kalyway 10.5.1 Efi Guid or MBR
  • Audio needs ALC883 Driver from install DVD
  • BIOS Ver: Latest
  • LAN (Realtek 8110SC) Works out of the box
  • No IDE support (Because of JMicron Chip) All drives should be sata, All IDE should be empty. IDE DVD in USB external Box return /com.apple.Boot error.
  • Disable Lan Option ROM from BIOS settings
EFI working, Vanilla unknown No, Everything works, except audio needs ALC883 driver from Kalyway DVD
945GM3-F Intel 945 & ICH7
  • Install Method: Kalyway & vanila_acpi_fix
  • BIOS Version:; Revision:
  • Audio: Realtek Audio works with Azalia
  • LAN: Realtek LAN works OOB
  • SATA & IDE: SATA works
Unknown Audio needs patching
Neo2-Digital K9AG AMD RS690G
  • Install Method: Zephyroth 10.5.2 V1 for AMD & 9.2.0 Kernel during installation
  • BIOS Version: 1.14
  • Audio: Realtek ALC888 works with ALC888Audio.mpkg
  • LAN: Realtek RTL8111B
  • SATA & IDE: Work
  • Optical Drive: TSSTcorpCD/DVDW SH-S183A works fine
  • Shutdown & Reboot work, Sleep not tested
Unknown Audio needs patching
P965 Platinum(-FI) Intel 965/ICH8 Chipset
  • Install Method: Kalyway 10.5.1 EFI Guid (updated to vanilla 10.5.2
  • Audio needs ALC888+Azalia Driver from here
  • BIOS Ver: 1.6 (1.8 DOES NOT WORK!)
EFI+netkas 10.5.2 kernel or toh No, Everything works, except IDE and audio needs ALC888+Azalia patch
. . . . . . . . . . . . . .

Supermicro

Hardware Name Chipset Notes EFI/Vanilla kernel working Fully Working w/o Patch
X7DAL-E Intel 5000X
  • Install Method: Kalyway
  • BIOS Version: Unknown; Revision: 1.3c
  • Audio: Not Tested, Using Sound Card
  • LAN: Not Tested
  • SATA & IDE: Work OOB
PC-EFI works Audio & LAN not tested
X7DWA-N Intel 54000
  • Install Method: Kalyway 10.5.1 + Kalyway 10.5.2 updater + Kalyway Kernel patch
  • BIOS Version: Revision: 1.0b
  • Audio: Reaktek 65535 - Works fine using the patch on Kalyway disc
  • LAN: NOT working yet
  • SATA & IDE: Work OOB
PC-EFI works
  • Audio needed patch (on Kalyway disc)
  • Intel 82575 EB Gigabit lan adapter not working yet
. . . . . . .

Processors

AMD

Model Notes Recognized as Fully Working w/o Patch
AMD Athlon 64 3000+ Socket 939 Working 1.8GHz Unknown Yes
AMD Athlon 64 3200+ Working 2GHz Unknown Yes
AMD Athlon 64 3500+ Working Unknown Yes
AMD Athlon 64 3500+ Working AMD Athlon™ 64 Processor 3500+ Yes
AMD Athlon 64 X2 3800+ @ 3.0Ghz Working 1.94 GHz Unknown Yes
AMD Athlon 64 X2 4000+ Working 2.1 GHz Unknown Yes
AMD Athlon 64 X2 4200+ Working 2.2 GHz Unknown Yes
AMD Athlon 64 X2 5200+ Working 2.6 Ghz Unknown Yes
AMD Athlon 64 X2 5600+ Working 2.81 Ghz Unknown Yes
AMD Sempron 3000+ Socket 754 Working AMD Sempron(tm) Processor 3000+ Yes
. . . . . . . . . . . . . . . . . . .

Intel

Model Notes Recognized as Fully Working w/o Patch
Intel Celeron 420 Working 1.6GHz Unknown Yes
Intel Pentium 4 Prescott 2.8GHz Working Intel 2.8Ghz Unknown Yes
Pentium® 4 630 (Prescott) Working Unknown Yes (ToH kernel)
Intel Pentium 4 HT Working 3.2Ghz Unknown Yes
Intel Pentium 4 3GHz HT Working 3GHz Unknown Yes
Intel Pentium 4 3GHz Working 3.6GHz Unknown Yes
Intel Pentium D 2.8GHz Working Unknown Yes
Intel Pentium D 3.4GHz Working Unknown Yes
Intel Pentium D 820 Working Unknown Yes
Intel Pentium D 915 Working 2.8GHz Unknown Yes
Intel Pentium D 930 Working 3GHz Unknown Yes
Pentium® D 935 (Presler) Working Unknown Yes (ToH kernel)
Intel Pentium D 950 Working Unknown Yes
Pentium Dual-Core E2140 1.6ghz Working 1.6 GHz Intel Core 2 Duo Yes
Intel Core Duo T2400 1.83GHz Working 2.0 GHz Intel Core Duo Yes
Intel Core 2 Duo T7500, Working 2.19GHz Unknown, reported correctly in System Profiler + Features. Yes
Intel Core 2 Duo E4300, Allendale Working 1.8GHz Intel Core 2 Duo Yes
Intel Core 2 Duo E4400, Allendale Working 2.0GHz Intel Core 2 Duo Yes
Intel Core 2 Duo E4500, Allendale Working 2.2GHz Intel Core 2 Duo Yes
Intel Core 2 Duo E4600 Working 2.4GHz Intel Core 2 Duo Yes
Intel Core 2 Duo E6300, Conroe Working 1.86GHz Core 2 Duo Yes
Intel Core 2 Duo E6300 Working Core 2 Duo 2.8Ghz Yes
Intel Core 2 Duo E6320 Working Intel® Core(TM)2 CPU 6320 @ 2.69GHz (slightly OCed...) Yes
Intel Core 2 Duo E6400 Working 2.13 Ghz Intel Core 2 Duo Yes
Intel Core 2 Duo E6420 Working 2.13 Ghz Intel Core 2 Duo Yes
Intel Core 2 Duo E6550 Working 2.33 Ghz Intel Core 2 Duo Yes (Vanilla Kernel)
Intel Core 2 Duo E6600 Working 2.4 GHz Intel Core 2 Duo Yes (Vanilla Kernel)
Intel Core 2 Duo E6750 Working 2.67 GHz Intel Core 2 Duo Yes (vanilla kernel)
Intel Core 2 Duo E8400 Working 3.0GHz Unknown Yes
Intel Core 2 Duo E8400 Clocked at 4 GHz Shown as "4 GHz Unknown" Yes (Vanilla Kernel)
Intel Core 2 Quad Q6600 Clocked at 4 GHz 2.4GHz Intel CoreTM 2 Quad Processors Yes
Intel Core 2 Quad Q6600 'G0 stepping/revision' Working 2.4/3.8 ghz Unknown 'change applesmbios.kext and it reports: 2,4ghz Intel Core2 Quad' Yes
Intel Core 2 Quad Q6700 Working 2.66 ghz Intel Core 2 Quad Yes
Intel Core 2 Quad Q9450 (Engineer Sample B1 version) Working Genuine Intel CPU 2.66GHz 3.2Ghz Yes (Vanilla Kernel)
Intel Core 2 Extreme QX9650 Working Not checked Yes
Intel Xeon 5405 Working 2GHz Unknown Yes
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Graphics Cards

Please specify if your card is AGP, Integrated, PCI or PCI-E.
Also, place chip and board manufacturer in their respective column.

AGP

ATI

Hardware Name Board-Manufacturer Notes QE / CI Resolution Fully Working w/o Patch
X1950 Pro 256MB GeCube Bronya's 7280 driver for 10.5.2; BIOS flashed as a PowerColor card Yes All Needs Patching


nVidia

Hardware Name Board-Manufacturer Notes QE / CI Resolution Fully Working w/o Patch
GeForce 6200A Zorg Used NVInject Unknown Yes Unknown
nVidia GeForce 6800 OC nVidia Working with NVInject 0.1.3 Both 1280x1024 No
GeForce FX5200 Palit Works with Brazilmac Both All Yes
. . . .

PCI Express

ATI

Hardware Name Board-Manufacturer Notes QE / CI Resolution Fully Working w/o Patch
Radeon X1600P 256MB ATI Used Maclovin's patch from here and added the deviceID 71C2 in ATIRadeonX1000.kext after intstall Both All Resolutions Yes with patch
Radeon x1650 Pro 256MB PCIE Sapphire No DVI Yes All Working with with Modbin's Driver patch. Install the Apple Graphics Update first (here is the installation file).
Radeon EAX1650 256DDR3 Gamer Edition ASUS Fully working Both All Working with with MacLovin's Driver patch (here is the installation guid).

Recognized as X1600.

Radeon X1800XT ATI Diabolik's X1800 Natit, enter Dev ID in ATIRadeonX1000.kext QE Works, CI unknown All Resolutions Yes with patch
Radeon X1900XT 512MB Connect3D No Patches QE Works, CI unknown All Resolutions Yes
Radeon X1900XTX 512MB ATI No Patches Yes All Resolutions Yes
Radeon X1950 Pro 512MB Powercolor Bronya's 10.5.2 patch here Yes Yes Needs Bronya's patch as described.
Radeon X1950 XTX 512MB Sapphire Used this kext to enable full support Yes All Resolutions Fully working with patch
Mobility Radeon X2300 128MB ATI Read [2] Yes 1280x800x32 (not always work, depends on laptop model) Working with patch (some mouse tearing, some video glitches)
ATI Radeon HD 2600XT 256MB Sapphire Used Natit; DeviceID: 0x9588 Yes All Resolutions Yes with Natit
ATI Radeon HD 2600XT Sapphire New natit.kext from Netkas as of 2/26 here Yes All Resolutions No, need natit.kext from netkas (new 2/26). w00h00, sleep now works.
ATI Radeon HD 2600XT Sapphire New natit.kext from Netkas as of 2/26 see above. Installation-Hints Yes All Resolutions, Dual Head, Pivot No OOTB, needs Netkas' NATIT. Here NO sleep with Asus P5LD2 VM
ATI Radeon HD 2600pro ONDA New ATIRadeonX2000_Leopard.pkg from here (only one package with netkas's natit 2/26/08 and white menu fix) Yes All Resolutions Fully working with patch.
ATI Radeon HD 2600Pro 512Mb ASUS White Menu Fix from and adding device id to ATIRadeonX2000.kext Yes All Resolutions Yes without Natit patch
ATI Radeon HD 2600 Pro 512MB Gigabyte Used ATIRadeonX2000 Leopard.pkg Both All Resolutions No, needs patch
ATI Radeon X2900XT ATI Unknown patches used Yes All Resolutions Yes - Not known if patch used
ATI Radeon HD 3870 Sapphire Triakis and latest 38x0 drivers from Leopard-10.5.2-AMD-EFI DVD (netkas's originals work too.) Yes All Resolutions (Monitor Max @ 1680x1050 on both heads) Patches incorporated in Leopard-10.5.2-AMD-EFI DVD or elsewhere obtained netkas/triakis kexts required.
ATI Radeon HD 3850 Gigabyte Latest Natit.kext and White_menus_fix Yes All Resolutions (Monitor Max @ 1680x1050 on both heads) Doesn't work without patches
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

nVidia

Hardware Name Board-Manufacturer Notes QE / CI Resolution Fully Working w/o Patch
GeForce 6200TC 512MB XFX Unknown Patch Unknown Unknown Unknown
GeForce 6800GT 256MB Leadtek No acceleration :( -- too slow and choppy to be useful. No 1920x1200 working No
GeForce 7200GS 256MB XFX NVInstaller v.4.1 QE/CI both work All resolutions work Fully working with patch
GeForce 7300 LE (64 MB RAM, 256 MB shared) Asus (OEM'd by HP) NVInject, added to GeForce.kext, and booted with "Graphics Mode"="[email protected]" No Hardware accelleration All resolutions work No QE/CI with patch
GeForce 7300LE 128MB Digital Alliance NVinject 0.2.1 used Yes All resolutions With NVInject
GeForce 7300LE 256MB Leadteck NVInject work fine Yes All resolutions work Fully working with patch (EFI strings recommended)
GeForce 7300GS 256MB Gigabyte NVInject/Natit both work fine QE/CI both work All resolutions work Fully working with patch
GeForce 7300GS 256MB Club3D NVInject on Kalyway Unknown All Fully working with patch
GeForce 7300GS 256MB ASUS NVinject QE/CI both work All resolutions work Fully working with patch
GeForce 7300GS 256MB XFX NVinject QE/CI both work All resolutions work Fully working with patch
GeForce 7300GS 256MB Chaintech NVinject 0.2.1 QE/CI both work All resolutions work Yes
GeForce 7300GS 256MB Chaintech Kalyway Patch Both All resolutions work Yes
GeForce 7300GT 256MB BIG NVInject QE/CI both work All resolutions work Yes with NVInject
GeForce 7300GT 256MB eVGA NVInject Both All resolutions Yes with NVInject
GeForce EN7300GT 256MB ASUS Works with NVinject Both All
GeForce 7600GS 256MB Point of View Used Titan QE/CI both work All resolutions work Fully working with Titan
GeForce 7600GS 256MB PowerColor NVinject QE/CI both work All resolutions work Fully working
GeForce 7600GT 256MB Gigabyte NVinject or Natit QE/CI both work All resolutions work Fully working
GeForce 7600GT 256MB NVIDIA None QE/CI both work All resolutions work Yes
GeForce 7600GT 256MB Eagle NVinject or Natit QE/CI both work All resolutions work Yes
GeForce 7600GT-OC VIVO 256MB MSI NVinject or Natit QE/CI both work All resolutions work VIVO doesn't work otherwise fully functional
GeForce 7600GT 256MB XFX NVinject, Natit or GFX-String QE/CI both work All resolutions work Yes, with NVinject, Natit or GFX-String
GeForce 7600GT 256MB eVGA NNInject 0.1.5 QE/CI both work All resolutions work Yes with NVInject
GeForce 7800GT 256MB NVIDIA Kalyway NVIDIA patch Unknown Not all Need patch from Kalyway
GeForce 7900GS 256MB NVIDIA Kalyway NVIDIA patch Unknown Not all Need patch from Kalyway
GeForce 7900GT 256MB ASUS Kalyway NVIDIA patch Unknown Not all Need patch from Kalyway
GeForce 7900GT CO 256MB eVGA NVInject QE/CI both work All resolutions work Need to use NVInject
GeForce 7950 512MB eVGA NVInject Unknown All resolutions work Need to use NVInject
GeForce 7950GT 512MB NVIDIA Needs 4 bytes of bios changed and reflashed. Used this guide and windows nvflash. QE/CI both work All resolutions work (only 60hz working though) Used NVinject 2.0 and followed guide here for kext setup.
GeForce 7950GTOC 512MB BFG Needs Bios Flash, Check here for rom. QE/CI both work All resolutions work Can use Nvinject or without if you have efi installed by following guide to create gfx string here
GeForce 8400GS 256MB XFX NVinject 0.2.1 here QE/CI both work All resolutions work No QE/CI without patch
GeForce 8400GT 512MB eVGA Works with NvInject Unknown All resolutions work Yes
GeForce 8500GT 256MB GIGABYTE NvInject 0.2.1 QE/CI both work Yes, correct widescreen res for analog only with VGA-DVI converter. Yes, with patch
GeForce 8500GT 512MB GALAXY NvInject 0.2.1 with 512MB patch QE/CI both work All resolutions work. Yes, with patch
GeForce 8600GT 256MB FATAL1TY XFX Used johnniecarcinogen's patch from here Unknown No. Highest resolution isn't right Not fully working with patch
GeForce 8600GT 256MB Elsa Gladiac Used 10.5.2 patch Unknown All resolutions work Unknown
Nvidia GeForce 8800GT 512MB (G92) XpertVision NVInstaller v.33 (NVinject v0.2.1) QE/CI both work All resolutions work Yes
GeForce 8800GT 256MB XFX NVinstaller0.33 QE/CI both work All resolutions work Yes, with patch
GeForce 8800GT 256MB ASUS NvInstaller 3.1 Used QE/CI both work All resolutions work Yes, with patch
GeForce 8600GT 512MB MSI Used johnniecarcinogen's NVInstall 0.33 to enable full features QE/CI both work All resolutions work Patch needed
GeForce 8600GT 256MB XXX XFX NVinject QE/CI both work All resolutions work Yes
GeForce 8600GTS 512MB NVIDIA Patch used, what patch unknown QE/CI both work All resolutions work Yes
GeForce NX8800GT 512MB MSI NVInstaller V.34 here Both All Just great!
GeForce 8800GT 512MB Turbo Gigabyte NVinject here QE/CI both work All resolutions work Yes
GeForce 8800GT 512MB (G92) Gigabyte EFI Strings & EFI v8 used. Works after Leopard Graphics Update QE/CI both work All resolutions work
eGeForce 8800GT KO 512MB (G92) eVGA NVInstaller v.33 (NVinject v0.2.1) QE/CI both work All resolutions work Yes, needs NVinject v0.2.1, works post applegfx update
GeForce 8800GTS 256MB NVIDIA Works with BrazilMac QE/CI both work All resolutions work Yes
GeForce 8800GTS 320MB MSI NVinject here QE/CI both work All resolutions work Needs patch for resolutions and memory detection
GeForce 8800GTS 320MB PNY NVinject here QE/CI both work All resolutions work Needs patch for resolutions and memory detection
GeForce 8800GTS 512MB XFX NVinject installer v.33 QE/CI both work All resolutions work No
GeForce 8800GTS 512MB (G92) ASUS NVinject.0.2.1 here QE/CI both work All resolutions work Yes, needs NVinject v0.2.1 and VRAM,totalsize has to be set manually in "info.plist" to <00000020> - 512Mb
GeForce 8800GTS 512MB (G92) Point of View NVinstaller v0.33 QE/CI both work All resolutions work (using 1920x1200) Yes, just used NVInstaller v0.33, download here: http://scottdangel.com/blog/?page_id=20
GeForce 8800GTX 756MB (G92) ASUS NVinject 0.2.0 Both All Yes w/ NVinject
. . . . . . . . . . . . . . . . . . .

Integrated

Intel

Hardware Name,(VRAM) Board-Manufacturer Notes QE / CI Resolution Full Work / No Patch
GMA950 Intel Working but some minor issues (mouse tearing) Both After applying kext update get only one resolution AppleIntelIntegratedFrameBuffer.kext v1.4.20 for all resolutions
. . . . . . . . .

Network Cards

Wireless

Interface Standard Device Manufacturer Notes Fully Working w/o Patch
Mini PCI Express Card 802.11abg AR5BXB6 Atheros Working using [3] kg6uyz's solution Working on Kalyway's 10.5.1 with 10.5.2 update
PCI Card 802.11b/g/n ENLWI-N Encore Works using Ralink 10.5 drivers http://www.ralinktech.com.tw/data/drivers/STA_RT2860%20D-1.0.0.0a%20UI-1.4.8.0_2007_11_26.dmg Yes
PCI Card 802.11b/g WMC300N Linksys Working OOB Yes
PCI Card 802.11n/g/b WMP300N Linksys Works OOB with Kalyway 10.5.1, requires 10.5.1 kexts (IO80211Family, IONetworkingFamily, IOPCIFamily) to work with Kalyway 10.5.2 No
PCI Card 802.11g WMP54GS Linksys Working out of the box both Kalyway 10.5.1 & iAtkos v1.0i; detected as Third Party Wireless Card Yes
PCI Card 802.11g WG311T Netgear Working using BugsBunny's 10.4.8 kexts Works with 10.4.8 kexts
PCI Card 802.11bg WG311T Atheros Working using this post (kexts from 10.4.8) Manufacturer ID: 168c Device ID: 0013 Working on Kalyway's 10.5.1 with 10.5.2 update
USB Adapter 802.11g WG111v2 (Realtek's RTL8187 Chipset) NETGEAR Detected as an Ethernet Controller with RTL8187L Drivers from HERE, and working perfectly! Working with driver
PCI Card 802.11g F5D7000 Belkin Working with Zephyroth 10.5.2, select Broadcom 43xx series drivers when customising the install Patches are on Zephyroth Install DVD
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Wired (Ethernet)

Hardware Name Manufacturer Notes Fully Working w/o Patch
Realtek RTL8110SC Reaktek Onboard card on MSI P965 Neo2(-FI) working out of the box
Intel�PRO/100ve Intel works with ASUSP4800vm.pkg also need IONetworking family.kext working 100% but require patch
Realtek 8100C Realtek Semiconductor Corp. Fully Working Recognized as Realtek 8139 Ethernet working 100% without patch
Realtek 8139 Realtek Semiconductor Corp. Works Works OOB
Linksys 100TX Cisco Fully working with Darwin Tulip kext http://forum.insanelymac.com/index.php?showtopic=6115&start=0&p=38422&#entry38422
D-Link DGE530T D-Link Works with skge-e.kext (Driver provided by D-Link doesn't work) Works with patch
Netgear Gigabit PCI Adapter (GA311) Netgear Model: GA311 Works out of box
. . . . . . . . . . . . . .

Sound Cards

Hardware Name (alphabetical) Manufacturer Notes Fully Working w/o Patch
Audigy 2 ZS Platinum Creative Labs Doesn't Work No
HDSP9532 RME Works out of the box Yes
SigmaTel 9220 (onboard) SigmaTel
  • Require sigmatel 9220.pkg, working audio from line out pin
  • Need to repair disc permission after pkg install
No, need patch
SigmaTel 9250 (onboard) SigmaTel Require AppleHDA Patcher v1.2 and a Linux dump No, need patch
UA-1EX Edirol Drivers from Edirol No, need driver
MOTU Ultralite MOTU External FireWire Audio Interface. Tested with Logic 8 Pro, iTunes, Quicktime, etc -- all working flawlessly. Works w/ standard Leopard driver from MOTU)
RME Fireface 800 RME External FireWire Audio Interface. Works perfectly in 400 and 800 (w/ 800 card) in Logic 8, iTunes. Works OOB with OSX drivers from RME [4])
. . . . . . . . . . . . . . . . .

Other Accessories

Hardware Type Hardware Name Manufacturer Notes Fully Working w/o Patch
Bluetooth Dongle ENUBT-C2E Encore Works OOB Yes
Bluetooth Dongle BCU32 Mobidick Works OOB Yes
USB Bluetooth Dongle BCM XXX Broadcom Works OOB Yes
USB Bluetooth Dongle PC2PC MSI Works OOB Yes
USB Bluetooth Dongle ACB10US Targus Works OOB Yes
Fingerprint Reader Unknown Microsoft Doesn't Work Doesn't Work
Keyboard G15 Gaming Keyboard Logitech Extra Keys & Display don't work, multimedia keys work OOB Somewhat
Keyboard & Mouse Unknown Genius Multimedia Keys work OOB Yes
Keyboard Evolution Stream Cherry Multimedia Keys work OOB Yes
Mouse DeathAdder Gaming Mouse Razer Works OOB Yes
Mouse Diamondback Razer Works OOB and you can use ProType drivers Yes
Mouse Copperhead Razer Works out of the box Yes
Mouse Logitech MX Revolution Works out of the box Yes - Logitech Mac OSX driver install for all button and wheel functionality.
Gaming keyboard Lycosa Razer Works out of the box Yes
PCI-E Card (1x) Rosewill RC-211 2 Port SATA RAID Card (Silicon Image Chipset) Set the jumper to deactivate the raid bios (unless you need it).
Needs OS X driver: driver 		Yes
USB Phone EX-03 Phone Skype URL yes
USB Sound Card KY - 360 3D sound (very cheap) sound in + out 2.1 yes
TV Tuner PCTV 110i Pinnacle Systems Doesn't Work Doesn't Work
UPS No-Break Back-UPS RS1500 APC Works OOB Works OOB
Webcam LifeCam VX3000 Microsoft Video working, unacceptable picture quality Built-in mic not working
CD/DVD-RW Drive Super-WriteMaster BG69-00734A Samsung Generic Drive Support. LightScribe working w/ appropriate software Yes
CD/DVD-RW Drive Samsung SH-S203D Samsung (TSSTcorp) Generic Drive Support. Yes
3G Modem E220 Huawei Works OOB Yes
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Retrieved from "http://wiki.osx86project.org/wiki/index.php?title=HCL_10.5.2&oldid=38757"
Powered by MediaWiki © 2021 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki   |   Privacy policy   |   About OSx86   |   Disclaimers