This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
| Hardware Name
|
Chipset
|
Notes
|
EFI/Vanilla kernel working
|
Fully Working w/o Patch
|
| Maximus Formula X38
|
X38
|
- Install Method: Kalway 10.5.1
- BIOS Version: Unknown; Revision: Unknown
- Audio: Using external audio, not tested.
- LAN: Works
- SATA & IDE: SATA works, IDE unknown
|
EfI & Vanilla Kernel
|
Audio not tested, otherwise yes
|
| P2AD2-E Premium
|
Intel 925XE
|
- Install Method: Kalway 10.5.1
- Audio: Onboard via Azalia Out
- LAN: Works, WiFi untested
- SATA & IDE: SATA works, IDE unknown
|
Kalyway 10.5.1+ 10.5.2 upgrade
|
|
| P5E-VM DO
|
Intel® Q35 / ICH9DO support Intel® Active Management Technology
|
- Install Method: Kalyeay Leopard 10.5.1, manual Update 10.5.2 kalyway combo update,
- BIOS revision: latest, BIOS settings for stock/vanilla kernel with sleep mode bit problem])
- Audio: Realtek® ALC883, 8-channel High-Definition Audio CODEC: works out of the box, some problem after 10.5.2
- LAN: Intel® 82566DM PCIe Gigabit LAN controller: not work patch unavailable
- SATA: works out of the box
- IDE: no test
- onboard USB to front:works out of the box
- onboard USB to back: works out of the box
- onboard Intel® Graphics Media Accelerator 3100 (Intel® GMA 3100) integrated: bypass by PEAK Geforce 7300 GT: work whit Vinject :-) )
|
no kernel vanilla patch apply and works well
|
95% working out of the box, some problem whit network card intel pro 100 autodisconnect after computer stan by.Usb device storage auto unmount. Running stable in the end!
|
| P5LD2-VM DH
|
Intel 945G and ICH7
|
|
Netkas' PC EFI V8 required to use vanilla/stock kernels
|
99% working out of the box, besides audio (see left). Running very stable in the end!
|
| ASUS P5K
|
Intel P35 + ICH9 Chipset
|
- Install Method: Kalway 10.5.1 - upgraded to 10.5.2
- BIOS Version: Unknown; Revision: Unknown
- Audio: Using onboard with patch
- LAN: does not work
- SATA & IDE: SATA works, in AHCI Mode
Stable having flashed P5KR bios 403 on P5K using AFUDOS /N to force ICH9 into AHCI mode
Now running for week stable with MAXMEM = 3072 in boot.plist, kept crashing without this option with 4GIG of RAM
|
EFI & Vanilla Kernel
|
No. LAN doesn't work
|
| Asus P5K-E WiFi/AP
|
Intel P35 + ICH9 Chipset
|
- WORKS OUT OF THE BOX:
- ICH9 6x Sata ports
- Jmicron 2x E-Sata ports
- Firewire, USB, COM1
- WORKS AFTER PATCHING:
- Audio=ad1988b stereo analog only
- Lan=marvel88e8056
- Wifi=realtek 8187l, configured as ethernet and uses Realtek app.
- Leopard WIFI drivers now available here!
- WORKS FOR SOME/GIVES SYSTEM CRASHES
- IDE/PATA ports work for me, <- "which driver do you use, btw do you also have 4gb ram?"
- BIOS SETTINGS (Update to latest 1004 or 1006):
- Set HDD-controllers 'ich9/jmicron' to AHCI mode, powerstate=S3
- Processor: Enable apic2.0, disable speedstep, disable c1e, enable VT and XT
- 4gb ram working < dependent on BIOS settings, read the forum if you have kernel panic!!!
- Install method easy:
- Kalyway 10.5.1 Install DVD 'select right patches, try MBR if GUID fails'
- Updated to 10.5.2 using Kalyway ComboUpdate and kernel update.
- iATkOS users use this thread
- Install method advanced:
- Retail-Leopard-DVD, GUID, pc-efi8, with retail kexts 'remove appleintelcpupowermanagment.kext, add dsmos.kext', only AUDIO/LAN/VIDEO.kexts needs to be added after that, also may add applesmbios.kext for showing right info in system profiler.
- Retail-Leopard 10.5.2 + graphics update also work. see netkas.org for howto
|
YES
|
On DVD (Kalyway) or patch (iAtkos)
|
| P5K Deluxe WiFi
|
Intel P35 & ICH9R
|
- Install Method: Kalyway 10.5.1 & Update to 10.5.2 Netkas method
- BIOS Version: 705; Revision: Unknwon
- Audio: Internal AD1988B only stereo out
- LAN1: Realtek, not tested, Shut off in bios
- LAN2: Marvel Yukon on interl PCIe bus filly works
- WLAN: Doesn't Work
- SATA & IDE: Both SATA controllers fully work, IDE never tested
|
EFI & Vanilla Kernel Work
|
Some problems
|
| P5KC
|
Intel P35 & ICH9
|
- Install Method: Kalyway 10.5.1 and 10.5.2 Combo Updater
- BIOS Version: 2602 or 0903; Revision: Unknown
- Audio: ACL883 Tarugas patch or ALC883 driver on install DVD
- SATA & IDE: SATA works, IDE not tested
- LAN doesn't work.
- Onboard WiFi works
- For some people, install the new kernel before the update
|
EFI & Vanilla Kernel
|
No. LAN doesn't work
|
| P5KPL-VM
|
Intel G31 & ICH7
|
- Install Method: Kalyway 10.5.1, Combo Updater, Netkas method
- Bios release: 303
- Audio work
- LAN don't work
- GMA3100 Don't work yet
- NV7600GT 256MB (with nvinject)
- System Profiler unstable (Need patch from 10.4.10)
|
PC_EFI_V8 + Grub, Vanilla Kernel
|
No
|
| P5K-SE
|
Intel P35 & ICH9
|
- Install Method: Kalyway 10.5.1 and 10.5.2 Combo Updater
- CPU: Enable apic2.0, disable c1e in Bios.
- Audio: HDAPatcher with alc883 dump (only tested analog stereo and line-in).
- LAN: Onboard doesn't work, had to use D-Link DGE530T 1GigE with skge-e.kext (Driver from D-Link website doesn't work).
- SATA & IDE: SATA works with memory remap disabled in bios, IDE untested.
- USB: Requires legacy support to be disabled in bios.
- Optical Drive: USB Optical Drive
- Graphics: Point of View Nvidia 8800GTS with nvinstaller 0.33 - 1920x1200 with full Quarts Extreme and Core Image support (QE/CI). -- Had to replace old Nvidia 6800GT because QE/CI acceleration wouldn't work in Leopard.
|
Yes
|
No, onboard lan doesn't work.
|
| P5W DH Deluxe
|
Intel 975X & ICH7R
|
- Install Method: Kalyway 10.5.1 and 10.5.2 Combo Updater
- BIOS Version: 2602; Revision: 1.04G
- Audio: Realtek ALC882M works
- LAN: Marvell 88E8053 both ports work out of box
- SATA: all port works, ICH7R IDE works, Jmicron IDE does work (non atapi device as indicated in manual)
- Onboard WiFi does work, with realtek 8187 drivers.|
- ez_raid ports work out of the box, natively. Raid0 works natively.
|
|
| P5W DH Deluxe
|
975X, ICH7
|
- Install Method: Retail disc image from separate installation, update to 10.5.2 via this guide. remove: AppleIntelCPUPowerManagement, AppleEFIRuntime. add: dsmos, ALCInject, Jmicron (optional). replace: AppleHDA, IONetworkingFamily, AppleSMBIOS. kexts here
- BIOS Version: 2004 ; Revision: unknown
- Audio: Realtek 882
- LAN: Marvell Yukon 88E8053
- SATA & IDE: SATA works out box, jmicron controller works with patch.
|
PC_EFI and Vanilla Kernel work fine
|
BIOS setup options:
- Execute disable function -> enabled
- Max CPUID -> enabled
- HPet -> enabled
- Memory remap feature -> enabled
- Microcode update -> enabled
- Acpi 2 support -> Yes
- Acpi -> Enabled
|
| P5B Deluxe (NO WiFi)
|
Intel P965 / ICH8R
|
- Install Method: Kalyway 10.5.1, Upgrade: Kalyway_Hack_10.5.2ComboUpdate
- ComboUpdate method, be prepared for several lengthy reboots. Relax & just let it run.
- P5B Deluxe BIOS Ver.1226 (latest available from ASUS)
- Audio: AD1988B 8-channel High Definition Audio still not working after update (patches not tested)
- JMicron JMB363 SATA / PATA controller NOT TESTED (2 x External SATA 3.0 Gb/s ports)
- Intel Matrix Storage Technology (RAID) controller not recognized by OS X
- All six (6) SATA 3.0 Gb/s internal ports tested working in ACHI (after upgrade)
- IDE mode NOT TESTED
- Marvell Gigabit LAN Port 1 working; Port 2 still not working (patch not tested)
- All ten (10) USB 2.0 ports working
- All PCI Slots working
- Both (2) FireWire ports working (TI 1394a controller)
- Partitioned as MBR using EFI bootloader
- TimeMachine working
- Software RAID drives created w/ DiskUtility still working fine after upgrade
|
EFI v8 + Vanilla Kernel
|
No; Onboard Audio and LAN port 2 need patches
|
| P5B
|
Intel P965
|
- Install Method: Kalyway 10.5.1, ComboUpdate + Kernel Patches applied in 10.5.1 or "Onetrack�s perfect install" works with ToH RC2 which is a lot of work
- BIOS: Unknown
- Audio: works after upgrade, needs patch in 10.5.1
- Storage: ACHI working; Install from IDE not working, install to IDE unknown
- LAN: Working
- Partitioned as MBR using EFI bootloader
- Onetrack:
- Audio: Needs editing or patching AppleAzaliaAudio.Kext, audio in not supported
- LAN: Works OOB
- SATA & IDE: Works OOB (JMicron IDE works OTB with Kalyways install Disc, otherwise JmicronATA.kext needs editing)
|
EFI & Vanilla Kernel
|
No, Patches applied in 10.5.1
|
| P5B
|
Intel P965
|
- Install Method: iAtkos 1.0ir2, no luck with Kalyway
- BIOS Version: 1202, had to downgrade using CrashFree BIOS
- Bios options: Max CPUID disabled, Memory remap enabled, Execution bit enabled
- Audio: works OTB
- LAN: works OTB
- SATA & IDE: Used SATA HDD + SATA Optical, enabled AHCI, disabled JMicron IDE
- Partitioned with MBR with Darwin bootloader (EFI failed)
- Non-vanilla kernel 9.2 (ToH) after Kalyway's ComboUpdate to 10.5.2
- Reboot and shutdown are buggy, have to boot sometimes with: "-v -x -legacy" after bad shutdown/reboot.
|
MBR + Non-vanilla kernel
|
Yes, no patches required
|
| P5B
|
Intel P965
|
- Install Method: iAtkos 1.0ir2
- BIOS Version: 1803
- Bios options: Max CPUID disabled, Memory remap enabled, Execution bit enabled
- Audio: works OTB
- LAN: works OTB
- DVD: Installed with USB2 Adapter for DVD-ROM, after install put back on IDE
- HDD: 320 Sata HDD for Vista and Ubuntu, 100 Pata with Vantec Sata converter for OSX, enabled AHCI
- Partitioned with MBR, used GRUB to load PC_EFI in Ubuntu
- Vanilla kernel with 10.5.2 and all updates
- Front USB (PCI Device ID in Sys Prof: 0x2833) not working / is missing - Solution
|
MBR and EFI + Vanilla kernel
|
Yes, no patches required
|
| P5B PLUS
|
Intel P965 + ICH8 Chipset
|
- Install method: Kalyway 1.5.1 + Kalyway Combo update
- Onboard audio: Working (With Kalyway audio patch)
- Onboard LAN: not Working
- Sata: full working
- IDE: Works after Install. For boot Sata drive needed.
- Video: Working with Kalyway Nvinject.
|
EFI v8 working. Vanilla 9.2.0 working.
|
Audio needs Azalia patch
|
| Asus P5GC-MX
|
Intel P965 + ICH8 Chipset
|
- HD fresh install with GUID using Disc Utility
- iATKOS v1.0i SSE3 with vanilla kernel 10.5.1
- Used PC_EFIv8 for GUID booting
- Updated to 10.5.2 using the original Apple combo update but using Devil's procedure on insanelymac
- Onboard LAN doesn't work
- Audio works with HDAPatcher ALC883.
|
YES
|
Audio needs patching
|
| P5WD2 Premium
|
i955X ICH7R
|
- Install Method: ToH 10.5 > Apple combo 10.5.1 + ToH 10.5.1 kernel > Apple combo 10.5.2 via this guide + ToH 10.5.2 kernel
- BIOS Version: 0802 (latest available); Revision: beta
- Audio: Realtek ALC882 - works with Taruga 1.2 patch
- LAN: Intel PCIe Gigabit LAN Controller (integrated) - works OTB; Marvell 88E8001 Gigabit LAN Controller (integrated) - turned off & not tested
- FireWire: Texas Instruments 1394a controller (integrated) - works OTB
- IDE: works OTB; ITE IDE controller (integrated) - turned off & not tested
- SATA: works OTB; Silicon Image 3132 SATA controller (integrated) - turned off & not tested
- Asus WiFi-TV PCI card (optional) - not work
|
EFI v8 works
|
Audio needs patching
|
| Asus P5GC-MX/1333
|
Intel 945GC Express Chipset
|
- Upgraded from Kalyway 10.5.1 to 10.5.2 using /"kalyway_hack_10.5.2ComboUpdate/"
- Onboard LAN doesn't work
- Audio works with HDAPatcher ALC883.
|
YES
|
Audio needs patching
|
| P5LD2-VM SE
|
Intel® 945G / ICH7
|
- Install Method: Retail DVD & web update to 10.5.2(Netkas Method)
- BIOS Version: 0602
- Audio ALC 882: Works with patch
- LAN: Works out of the box
- SATA & IDE: Works out of the box
|
PC-EFI-V8 + Vanilla Kernel work
|
Audio needs Patching, and couple of kext removed/replaced.
|
| P5GPL-X SE
|
Intel 915PL + ICH6
|
- Install method: Kalyway 10.5.1, Kalyway 10.5.2 Combo Updater & Kernel Patch
- BIOS Version: 0301
- Audio: ADI1986A - use AppleAzaliaAudio.kext from JaS 10.4.8 DVD (Kalyway 10.5.1 version did not work)
- LAN: Marvell Yukon 88E8001 - use Marvell Yukon 88E8001 driver
- SATA & IDE - both work by default
|
PC EFI (MBR) works, Vanilla Kernel does not
|
No, LAN and Audio Output need patching
|
| Asus A8N-E
|
NFORCE4
|
- Install Method: Leopard 10.5.2 Zephyroth AMD
- BIOS Version: Unknown; Revision: Unknown
- Audio: Install AC97 package on the install menu
- LAN: Install Forcedeth from the install menu
- SATA & IDE: IDE works; SATA not tested
- Install Boot Hang Fix:
- Boot with the DVD
- Press F8, then type "-s"
- Type "cd /usr/standalone/i386"
- Type "dd if=./guid/boot1h of=/dev/rdiskXsY bs=512 count=1" (X is the disk number and Y is the partition number on which you installed Leo)
- Type "dd if=./guid/boot0 of=/dev/diskX bs=400 count=1"
- Type "./startupfiletool -v /dev/diskXsY ./boot_v8"
|
EFI v8 Works
|
Audio & LAN need patching
|
| A8N-SLI
|
NVIDIA nForce4 SLI
|
- Install Method: Zephyroth 10.5.2
- BIOS Version: 1604; Revision: Beta
- Audio: Realtek ALC850 (Selected AC'97 from Customize list)
- LAN: nForce4 built-in Gbit MAC (Selected forcedeth from Customize list)
- SATA & IDE: Installed OS onto IDE drive without problems. Also have two SATA drives in Striped RAID configured through MediaShield ROM, but the RAID showed up as two individual drives in Mac's Disk Utility during installation. Cannot access RAID even after installation.
- Optical Drive: BenQ DW1625. During the 15 odd times I booted from the DVD to install, after the first 6 or 7 times, the installer started saying that it could not read from the disc. This was happening when it normally would check the media for errors. So, I re-burned a new disc using the same drive of the same ISO(which I had initially created from the original (now problematic) disk). The new disc worked. Maybe, just a very fragile disc. But, weird.
- Shutdown and reboot works. Sleep gives a blank (black), unresponsive screen. Have to hard reset.
- Had to run the installation, with the same options, multiple times for it to get it right. After a few installs, I was getting the gray screen asking me to restart the computer. I really don't know how I got around that problem. I just installed again without changing any options. Finally, when it worked, I had my ethernet cable unplugged. In the Customize list, I had chosen the nforce chipset 2/3/4/5 kext, AC '97, forcedeth, nvidia geforce 10.5.2 and nvinject 128 MB for my 6600GT graphics card. Name of volume: Leopard. I chose the EFI v8 plus MBR bootloader to make the "Leopard" volume bootable. I'm using grub to choose between my various OSes. SSE3 9.2.0 TOH Kernel chosen from the Customize list.
|
EFI: Since I installed using Zephyroth's 10.5.2, I'm assuming it installs EFI by default?
|
Yes, everything works without patching. No flags needed while booting.
|
| A8N-VM
|
nForce 410
|
- Install Method: Zephyroth Leopard 10.5.2 for AMD
- BIOS Version: 0902; Revision: Unknown
- Audio: ADI AD1986A works with ALC888 patch and no input
- LAN: Works with Zephyroth patch in installation
- SATA & IDE: Works with Zephyroth patch in installation
- partitioned as MBR
|
EFI works
|
Audio & LAN need patching
|
| Crosshair AM2
|
nVidia nFocre 590 SLI MCP55
|
- Install Method: Zephroth AMD SSE3 9.2.0 Kernel
- BIOS Version: 0702; Revision: Unknown
- Audio: Works with AzailiaHD from install DVD
- LAN: Doesn't Work - OSX detects them with Forcedeth and they have MAC addresses however they will not detect Ethernet cables
- SATA & IDE: Both Work
- To avoid "Still Waiting for root device," have an IDE HD and optical drive plugged in and install on SATA
- Needs boot hang fix if using GUID - same as Asus A8N-E NFORCE4
|
EFI v8 Works
|
LAN doesn't work, Audio needs patching (reinstall AzailiaHD after 1st boot)
|
| M2N-E SLI
|
nForce 500 MCP
|
- Install Method: Zephyroth 10.5.2 AMD SSE3 9.2.0 Kernel
- BIOS Version: 0902; Revision: Unknown
- Audio: C-Media 6501 HD Audio Device; works out of the box, recognised as USB Audio Device
- LAN: Works with nForce 2/3/4/5 drivers selected in install options.
- SATA & IDE: SATA works (can do flat install to SATA HDD); IDE Works
|
EFI v8 Works
|
No, lan needs patching
|
| M2N32-SLI Deluxe
|
Nforce 590 SLI MCP
|
- Install Method: Leo4All-10.5.2 PPFv1 Universal AMD/INTELSSE2/SSE3 9.2.0 Kernel
- BIOS Version: 1802; Revision: Unknown
- Audio: ADI AD1988B SoundMAX, Azaila Driver From DVD
- LAN: Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0e (Integrated), RTL8187 Driver From DVD
- SATA & IDE: It Will Install On IDE or SATA
- Optical Drive: SATA LG DVD Burner | Had to hook up IDE DVD-Rom to install (removed IDE Rom after install and everything works fine)
- AMD-Patch From DVD
|
EFI Worked
|
The integrated LAN does not work out of the box. (Did not try to fix this, because on board wireless worked with patches applied during install. No post-install patches applied.
|
| Striker Extreme
|
NVIDIA NForce 680i SLI
|
- Install Method: Kalyway Update combo 10.5.2 + 10.5.2 SSE3 kernel update to fix boot delay and black screen, efi MBR
- BIOS Version:1401
- Audio: SoundMax AD 1988B, working stereo only, no input with AzaliaAudio.pkg installer
- LAN: Marvell Yukon 88E8039, working with nforcedeath, both nics, all CPUs enabled, unstable under load
- SATA & IDE: Does SATA work? Both working flawlessly out of the box (10.5.1 and 10.5.2)
- Optical Drive: Both IDE and SATA drives working. Both optical drives LiteOn models DVD burners
- Shutdown, reboot work flawlessly, sleep hangs computer after update to 10.5.2
- Video card GeForce 7600GT working Quartz Extreme with latest nvinject 0.2.1 had to edit NVDAResman.kext,NVDANV40.HAL,NVDANV30.HAL with device specific ID and remove all other device ID's
|
Not tested
|
LAN and Audio
|
| P5SD2-FM
|
SiS 649DX/SiS 966 chipset
|
- Install Method: Flat Image, ToH Kernel, Kalyway 10.5.2 Combo Update
- BIOS Version:; Revision:
- Audio: Works
- LAN: Works
- SATA & IDE: SATA unknown, IDE works
- Optical Drive: NEC DVD_RW ND-4551A works
- Shutdown & Reboot works, Sleep not tested
|
Unknown
|
Yes
|
| K8V-XE
|
VIA K8T890
|
- Install Method: Zephyroth 10.5.2 AMD > SSE3 9.2.0 kernel after Uphuck 10.4.9 1.4a drivers install (USB, Azalia, VIA Rhine)
- BIOS Version: 0703
- Audio: Realtek ALC660 (integrated) - works with Uphuck Azalia patch (not Zephyroth patch)
- LAN: Realtek RTL8201CL-LF 10/100M (integrated) - works with Uphuck VIA Rhine driver
- IDE: VIA IDE controller (integrated) - works with Zephyroth VIA drivers
- SATA: JMicron JMB 363 SATA controller (integrated) - used as storage drive
- Video: NV 7300GT works with NVInstaller V41
- Install Boot Hang Fix:
- Boot with the DVD
- Press F8, then type "-s"
- Type "cd /usr/standalone/i386"
- Type "dd if=./guid/boot1h of=/dev/rdiskXsY bs=512 count=1" (X is the disk number and Y is the partition number on which you installed Leo)
- Type "dd if=./guid/boot0 of=/dev/diskX bs=400 count=1"
- Type "./startupfiletool -v /dev/diskXsY ./boot_v8"
|
EFI MBR works
|
Audio & LAN need patching
|
| P5V-VM Ultra
|
VIA P4M890
|
- Install Method: Kalyway 10.5.1, Combo Updater, & Kernel Patch
- BIOS Version: Unknown; Revision: Unknown
- Audio: Realtek High Definition Audio, ADI AD1986A Soundmax Codec
- LAN: Realtek RTL8201CL
- SATA & IDE: Unknown
|
Unknown
|
Audio needs patching
|
| P5VD2-MX
|
VIA P4M890
|
- Install Method: Kalyway 10.5.1, Combo Updater, & Kernel Patch
- BIOS Version: 1017; Revision: Unknown
- Audio: ADI1986A; works with Azalia
- LAN: Realtek RTL8201CL; works with viarhine.kext
- SATA & IDE: IDE works; SATA needs patching to appleviaata.kext and add 0x53371106 0x2363197B to the device ID
- Shutdown & Restart fully working, Sleep not tested
|
Unknown
|
No, audio & lan need patching
|
. . . . . . . . . . . .
. . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . .
| Hardware Name (alphabetical)
|
Chipset
|
Notes
|
EFI/Vanilla kernel working
|
Fully Working w/o Patch
|
| Gigabyte EX38-DS4 (rev 1.1)
|
Intel x38
|
- Install "leoallv2 version" 10.5.2
- all ok (ethernet realtek works fine, audio works fine with alc 889)
|
|
|
| GA-EP35-DS3R v2.1
|
Intel P35
|
- Install Method: Kalyway + Apple Update 10.5.2 + Adobe Graphic Update
- BIOS Version: F2
- Audio: Works with AppleHD patch (2.1 and digital)
- LAN: Works out of the box
- SATA works in AHCI mode (NCQ working)
|
Yes. Fully supported EFI v8 + Vanilla kernel
|
No. Audio need patch.
|
| GA-EP35-DS3R
|
Intel P35 & ICH8
|
- Install Method: iATKOS v1.0i, Brazilmac had problems with Rosetta apps
- BIOS Version: F12; Revision: 3.3
- Audio: Audio888 installer package from Skippyretard and AppleHDA patcher v1.20
- LAN: No, edit 8053 to 8056 and 62 to 64 in the Apple Yukon2 kext
- SATA & IDE: Only 2 SATA ports work
|
Unknown
|
No, Audio & LAN need patches
|
| GA-EP35-DS4 Rev. 2.1
|
Intel P35
|
- Install Method: Leo4All v2
- BIOS Version: F12
- Audio: OOB - Used 889 (says DS3R)
- LAN: OOB - Realtek
- SATA & IDE: OOB, ICH9 - AHCI, J - IDE (else no DVD boot)
- Firewire: OOB
- Bluetooth: USB dongle working
- Sleep: OOB
|
Yes (Vanilla 9.2.2)
|
Yes. I used MBR, and does dual-boot XP.
|
| GA-EP35-DS4
|
Intel P35
|
|
Yes (9.2.2)
|
No. Audio patch needed.
|
| GA-P35-DS3
|
Intel P35
|
- Install Method: Kalyway 10.5.1 + Patched Kalyway Update 10.5.2 + Patched Kalyway Kernel 10.5.2 + Graphic Update
- BIOS Version: F12
- Audio: Works with AppleHD patch (2.1 and digital and input)
- LAN: Works out of the box
- SATA Support works without AHCI
- IDE Suppport works
|
Yes. Fully supported EFI v8 + without Vanilla kernel
|
No. Audio needs patch. Bonjour services do not work out of the box. Shutdown does not work with vanilla kernel.
|
| GA-P35-DS3
|
Intel P35
|
- Install Method: Kalyway 10.5.1 & Kalyway Combo Updater
- BIOS Version: F12; Revision: 2.1
- Audio: Works with HDA ICH9 ALHC888 works & Apple HDA Patcher v1.20
- LAN: Works OOB
- SATA & IDE: SATA works with IOATAFamily.kext V1.1
- Optical Drive: LG GSA-H55L IDE (Fully Working with IDE to SATA Cable )
- Shutdown & Sleep don't work, restart unknown
|
EFI v8 & Vanilla Kernel
|
No, Audio needs patching
|
| GA-P35-DS3L
|
Intel P35
|
- Install Method: Kalyway + Apple Update 10.5.2 + Graphic Update
- BIOS Version: F5
- Audio: Works with AppleHD patch (2.1 and digital)
- LAN: Works out of the box
- SATA & IDE: SATA works OOB, IDE not working (don't use AHCI)
|
Yes. Fully supported EFI + Vanilla kernel
|
No. Audio doesn't work
|
| GA-P35-DS3P
|
Intel P35 + ICH9R
|
- Install Method: Kalyway 10.5.1, Kalyway 10.5.2 Combo Updater & Kalyway Kernel update
- BIOS Version: F8; Revision: 2.0
- Audio: works with ALCinject.kext and AppleHDA.kext
- LAN: LAN working out of the box
- SATA & IDE: SATA works out of the box, using AHCI
|
Yes. Fully supported EFI + Vanilla kernel
|
No; Audio need patching
|
| GA-P35-DS3P (REV 2.1)
|
Intel P35 + ICH9R
|
- Install Method: Leo4All V2
- BIOS Version:; Revision: 2
- Audio: Model, ALC889A - Used Taruga AppleHDA patcher; removed ALCInject.kext its not needed with EFI string
- LAN: Model, Realtek 8111B
- SATA works, in BIOS set all disk modes to ACHI (see patching note) IDE: not tested (yet)
- Samsung SH-203B - Sata interface
- Yes, all.
- Firewire, and USB ports all working
|
Yes; EFI & 9.2.2 vanilla
|
No, Audio needs patching (see above)
|
| GA-P35C-DS3R
|
Intel P35 + ICH9
|
- Install Method: Kalyway + Apple Update 10.5.2 + Graphics Update
- BIOS Version: F4
- Audio: Works with patched AppleHDA + ALCinject (mic works)
- LAN: Works out of the box, but sourceforge Realtek R1000 driver is better (fixes Bonjour)
- SATA: SATA works out of the box, using AHCI on ICH9 controller (JMicron disabled)
|
Yes. Fully supported EFI + Vanilla kernel
|
No. Audio needs patch
|
| GA-P35-DS3R
|
Intel P35 + ICH9R
|
- Install Method: Kalyway 10.5.1 + Kalyway Upd. 10.5.2 + Vanilla kernel 9.2.0 + Graphics Upd.
- BIOS: Sata native mode, 64 bits enabled, Vanderpool enabled, Sleep S0 (S3 doesn't work)
- Audio: works with patched AppleHDA + ALCinject
- LAN: works out of the box
- SATA: works out of the box, using ICH9R without AHCI (JMicron disabled)
|
Yes. Fully supported EFi + Vanilla kernel (kernel 9.2.2 ok)
|
No. Audio needs patch
|
| GA-P35C-DSL
|
Intel P35
|
- Install Method: Kalyway 10.5.1 & Kalyway Combo Update
- BIOS Version: F6; Revision: 2.0
- Audio: ALHC888 and Apple HDA Patcher v1.20
- LAN: Doesn't always work
- SATA & IDE: Both fully working
- Optical Drive: LG GSA-H22N BK (Fully Working)
- Shutdown & Reboot fully working, Sleep not tested
|
EFI v8 + Vanilla Kernel
|
No. Audio needs patch
|
| GA-P31-DSL
|
Intel P31 + ICH7
|
- Install Method: BrazilMac Patched DVD & MBR Partition
- BIOS Version: F8; Revision: Unknown
- Audio: Realtek ALC888 works with AppleHDA Patcher
- LAN: RTL 8111B works OOB
- SATA & IDE: Works OOB
|
EFI v8 Works
|
Audio needs patching
|
| GA-G33M-DS2R
|
Intel G33
|
- Install Method: Kalyway 10.5.1 + manual Update to 10.5.2 + Graphic Update
- BIOS Version: F6
- Audio: Works with AppleHDA patch (stereo out, front panel, digital, mic, line in)
- LAN: Works out of the box
- SATA 6 ports works AHCI
- IDE works
- Thysm00 Guide
|
Yes. Fully supported EFI v8 + Vanilla kernel
|
No. Audio needs patch.
|
| GA-G31M-S2L
|
Intel G31
|
- Install Method: LEO4ALLv2 & Vanilla Kernel & EFI
- SM Bios 2.3, ACPI 1.0b, PnP 1.0a, DMI 2.0
- Audio: Realtek ALC662 works with AppleHDA patcher & alc662.txt
- LAN: Works out of the box, reccomended to set ip address manualy
- SATA & IDE: Work OOB
- Thysm00 Guide
|
Yes. Fully supported EFI v8 + Vanilla kernel
|
No. Audio needs patch.
|
| GA-K8NF-9
|
NVIDIA nForce4 (4X) MCPs
|
- Install Method: Zephyroth Leopard 10.5.2 AMD
- BIOS version: Unknown
- Audio: Realtek ALC850 Audio AC'97 Codec : Works with Kext but, may works out of the box.
- LAN: Works out of the box
- SATA: Works out of the box
- IDE: Not tested
|
Yes
|
Yes
|
| GA-K8N51GMF-9
|
NVIDIA nForce 430
|
- Install Method: Zephyroth Leopard 10.5.2 for AMD
- BIOS Version: F7; Revision: Unknown
- Audio: Yes (Stereo) works with "beta4some860_880"
- LAN: Works with forcedeth-nockd.kext
- SATA & IDE: Does SATA work? Any options in BIOS or Patches? Same thing with IDE
- Restart & Shutdown,Sleep fully working
|
Unknown
|
LAN and Audio needs patch
|
| GA-P965-DQ6
|
Intel P965 + ICH8R
|
- Install Method: Kalway 10.5.1, Kalyway 10.5.2 Combo Updater & Kalyway Kernel update
- BIOS Version: F11; Revision: 1.0
- Audio: Realtek ALC888DD; Not Tested
- LAN: Marvell 8053, works OOB
- SATA & IDE: Both work OOB
- Computer wakes from sleep, keyboard doesn't work after that
|
Unknown
|
Yes, audio not tested
|
| GA-P965-DS3
|
Intel P965
|
- Install Method: Kalway 10.5.1 & 10.5.2 Combo Updater
- BIOS Version: F10; Revision: Unknown
- Audio: Works
- LAN: Works
- SATA & IDE: Works
|
Unknown
|
Yes
|
| GA-965P-S3
|
Intel P965 + ICH8
|
- Install Method: Kalway 10.5.1, Kalyway 10.5.2 Combo Updater & Kalyway Kernel update (vanilla) or iATKOS and patch (see below)
- Kalyway:
- Options: EFI_guid, Natit, ALC883, Vanilla kernel +fix
- BIOS Version: F12; Revision: 1.0
- Audio: ALC883; Headphones work (only front panel jack), Line out not working, Digital out not tested
- LAN: Marvell 8056 Gigabit; Works OOB
- SATA & IDE: (both set to AHCI) Only Orange connectors (not purple); Works OOB
- iATKOS:
- Audio: Works OOB
- LAN: Need to repatch after update, save AppleYukon2.kext before upgrade and replace this file after upgrade, reboot twice
- Install iATKOS 1.0i and then upgrade to 10.5.2 with guide here
|
Yes
|
Yes, Audio: only headphone, lineout and digital showing in preferences: not fully tested
|
| GA-945GCM-S2C
|
Intel 945G + ICH7 Chipset
|
- Install method: Kalyway 10.5.1 Install DVD
- Update to v10.5.2: Netkas method
- kernel 9.2.2 ok
- BIOS version F4, Rev. 1.0
- Audio requires AppleAzaliaAudio.kext
- LAN working out of the box
- SATA and IDE working out of the box
- Certain applications (i.e. FireFox) cause Intel GMA950 glitches
|
EFI + Vanilla kernel 9.2.2 working
|
No; Audio needs patching
|
| GA-945GCM-S2L
|
Intel 945G + ICH7 Chipset
|
- Install method: Kalyway 10.5.1 Install DVD
- Update to v10.5.2: Kalyway 10.5.2 Combo update + Apple update + Kalyway 10.5.2 Kernel update
- Audio requires Azalia_Out.kext on Kalyway
- LAN not working out of the box need to use RTGMac_v1.1.6.zip
- SATA and IDE working out of the box
|
EFI + Vanilla kernel working
|
No; Audio/LAN needs patching
|
| GA-945GCMX-S2
|
Intel 945GC + ICH7
|
- BIOS version: F4, Rev. 6.6
- (1) Installation (v10.5.0) method: Onetrack method with EFI v8.0 on GPT using iGuru guide
- Update to v10.5.2: Netkas method
- Audio (ALC 888): Works with skippyretard patch
- Video (GMA 950): Works with modified AppleIntelIntegratedFramebuffer.kext from BrazilMAC guide
- LAN: Works out of the box
- IDE and SATA: Works out of the box
- Sleep/Wake, Restart, Shutdown work
- ----
- (2) Installation method: iATKOS
- Audio: Works OOB
- LAN: Works OOB
- SATA & IDE: Works OOB
|
Yes
|
No. Audio and video need patches
|
| GA-945GZM-S2
|
Intel 945 Chipset
|
- Install method: Kalyway 10.5.1 + Kalyway 10.5.2 ComboUpdate
- BIOS version unknown, Rev. unknown (1/29/07)
- Audio needs skippyretard's driver
- LAN works out of the box
- SATA and IDE working
|
Unknown
|
No; Audio needs patching
|
| GA-945P-S3
|
Intel 945P + ICH7
|
- Install Method: iATKOS V1.0i & Kalyway 10.5.2 Updater
- BIOS Version: Unknown; Revision: 3.3
- Audio: Realtek ALC888 8 Channel Audio works
- LAN: Realtek 8111B Gigabit Ethernet works
- SATA & IDE: Both work
|
Unknown
|
Yes
|
| GA-8I865GVMK F9 (Socket 478)
|
Intel® 865G GMCH & ICH5
|
- Install Method: Kalyway
- Audio: Realtek ALC655 works
- LAN: Intel PRO/100 VE Ethernet Controller works
- SATA & IDE: Unknown
- Optical Drive: Unknown
|
Unknown
|
Unknown
|
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
| Hardware Name
|
Chipset
|
Notes
|
EFI/Vanilla kernel working
|
Fully Working w/o Patch
|
| DP35DP
|
Intel P35 + ICH9
|
- Install method: Kaliway's 10.5.1 DVD + 10.5.2 Combo Update following this tutorial
- BIOS Version: DPP3510J.86A.0413
- Audio: Works with Kext Helper & STAC9271D_0x83847627_testing codec downloadable here
- Onboard LAN does not work (buy a cheap realtek)
- USB, Firewire work out of the box
- IDE does not work
- SATA works in IDE Mode
- Optical Drive must be SATA to work and to perform install
|
EFI v8 + Vanilla Kernel Working, Restart and Sleep work
|
Audio requires patching
|
| DG33FB
|
Intel G33
|
- Install method: Kaliway's 10.5.1 DVD + Kalyway's hacked Combo update 10.5.2 and Vanilla Kernel 9.2
- BIOS Version: DPP3510J.86A.0326
- Audio: Works with AppleHDA & ALC888 codec dump (Including BIOS Update herefrom Intel)
- Onboard LAN does not work
- USB, Firewire work out of the box
- IDE works with Patching
- SATA works in AHCI Mode
|
EFI v8 + Vanilla Kernel Working
|
Audio and IDE require patching
|
| D975XBX2KR (BadAxe2)
|
Intel 975X Express
|
- Install Method: BrazilMac 10.5 + EFI v8 MBR, Vanilla kernel
- BIOS Version: 2813 [BX97520J.86A]; Revision: Unknown
- Audio: Need to patch with AppleHDAPatcher_v1.16 (STAC9274D)
- LAN: Need to replace IONetworkingFamily.kext from 10.4.9 + EFI strings to fix various UUID errors and TimeMachine
- SATA & IDE: Work OOB
|
Yes, both work
|
|
| D975XBX2
|
Intel 975X & ICH7DH
|
- Install Method: iATKOS_v1.0i vanila + 10.5.2 direct update (Netkas)
- SATA AHCI (GUID Partitions), IDE, USB, FireWire and Lan fully working.
- GF7600GT as EFI (string added): no injectors
- Sigmatel STAC9274D audio working with Taruga's AppleHDAPatcher 1.16
- Onboard Marvel88SE61XX not working
|
Yes (pc_efi_v8 + pc_efi_v7.4)
|
Sigmatel Audio requires patch
|
| Intel D945GNT
|
Intel® 945G Express Chipset
|
- Install Method: All
- Audio (Sigmatel 9220) works with patch 9200.pkg
- LAN works with ASUSP4800vm.pkg {for tiger add product ID to AppleIntel8255x.kext}{for leopard need IONetworking family.kext}
- SATA & IDE works
|
Efi is working Vanilla not tested
|
- Sigmatel Audio require patch
- Intel® Pro/100ve requires driver
|
| 945GNTKLR
|
Intel 945G
|
- Install Method: Kalyway 10.5.1 & Combo Updater
- BIOS Version: Unknown; Revision: Unknown
- Audio: HDA Intel 9221 & Apple HDA Patcher v1.20
- LAN: Works OOB
- SATA & IDE: SATA & IDE work
- Video: GMA950 works by replacing current appleIntelIntegratedFramebuffer.kext with version 1.4.20
- Optical Drive: Pioneer 111D fully working
|
EFI works, Vanilla doesn't
|
Audio needs patching
|
| D945GTP
|
Intel 945G
|
- Install Method: iATKOS or Kalyway 10.5.1 with Kalyway 10.5.2 update
- BIOS Version: Unknown; Revision: Unknown
- Audio: Sigmatel 9220 needs patch
- LAN: Intel PRO 10/100 needs patch
- SATA & IDE: SATA works, IDE not tested
|
Unknown
|
No
|
| D915GAV
|
Intel 915G
|
- Install Method: Kalyway 10.5.1 and modified 10.5.2 Combo Update. See gizmoarena for more info
- BIOS Version: Unknown; Revision: Unknown
- Audio: Realtek ALC882 HD works with Azaila patch
- LAN: SURECOM EP320X-R (Realtek chipset) works OOB
- SATA & IDE: Works OOB
|
PC-EFI
|
Audio Needs Patching
|
| D865GLC
|
Intel 865
|
- Install Method: Brazilamc Patched DVD with Kalyway 10.5.2 Updater & Brazilmac Post-Patch
- BIOS Version: Unknown; Revision: Unknown
- Audio: Works OOB
- LAN: Works OOB
- SATA & IDE: IDE works, SATA not tested
|
No
|
Yes
|
| D915GAV
|
Intel 915G
|
- Install Method: Kalyway 10.5.1 and modified 10.5.2 Combo Update. See gizmoarena for more info
- BIOS Version: Unknown; Revision: Unknown
- Audio: Realtek ALC882 HD works with Azaila patch
- LAN: SURECOM EP320X-R (Realtek chipset) works OOB
- SATA & IDE: Works OOB
|
PC-EFI
|
Audio Needs Patching
|
| Intel DG31PR
|
Intel G31- no qc/qe
|
- Install Method: LEO4ALL V2 picked the options for Vanilla 9.2.2, sound, net
- BIOS Version: 0047; Revision: BIOS Update 0047 PRG3110H.86A
- Audio: Model, RealTek* ALC888, used alc888 patch included on DVD
- LAN: Model, RealTek* RTL 8111, used realtek patch included on DVD
- SATA & IDE: 3 sata drives all working no problems, including a ATA usb backup drive
- Optical Drive: LG IDE lightscribe works perfect with lightscribe software and toast 9
- Do shutdown, reboot and sleep work? perfect
|
Yes, Yes
|
Audio requires patching. Kalaway/iatkos req. the gparted method and wouldn't work with a partitioned disk but leo4all will.
|
|
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. .
