HCL 10.6.0

Revision as of 19:26, 26 January 2010

Template:10.6.0

This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.

ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
Please add hardware into tables.
This is for 10.6.0 builds only.

For how to edit the Wiki, please see this thread. Thank you!

You're looking for an Installation guide? see here

Motherboards

Abit

Hardware Name	Chipset	Notes	EFI/kernel working	Fully Working w/o Patch
IP35-PRO	Intel P35 ICH9R	Intel E7500 CPU 2.93GHz Pixelview 9400GT 512MB VGA (EFI string) Ok! ICH9R SATA (Sata-AHCI in GPT) Ok! Dual LAN RTL-8110SC/8169SC Gigabit Ethernet Ok! ALC888 [DSDT Mod + LegacyHDA] Ok! Snow Leopard 10A432 Ok (Installed from running 10.5.8) Chameleon 2.0 RC1 + Boot EFI 10.1 [1]	Yes Vanilla	No
IP35-E	Intel P35 ICH9	Intel Core 2 Duo E8300 CPU @ 3.4GHz Graphics: NVIDIA 8800GT 512MB (EFI string) Ethernet: Marvell 88E8056 (Edit Dev ID) Sound: Realtek ALC888 (DSDT.aml[2] + LegacyHDA.kext) SATA Controller: ICH9 non-AHCI (replace the fixed [3] by IOATAFAMILY.kext) Boot: Chameleon 2.0 RC2 + PC EFI 10.5 Other<Necessary>: FakeSMC.kext, NullCPUPowerManagement.kext,OpenHaltRestart Other<Unnecessary>: SMBios.plist,PlatformUUID.kext,SleepEnable.kext,P-State(expect VoodooPower)	Yes	No
IP35-PRO XE	Intel P35 ICH9R	Intel E8500 CPU 3.16 GHz Snow Leopard 10.6 Retail (Installed from running 10.5.7) using this guide [4]. Used modified DSDT.aml and slightly different steps towards the end used. Check my post in this thread for details. Install failed, but system up and working after reinstall of BSD.pkg from Leopard system. XFS NVIDIA 8400GS 512MB VGA (EFI string from OSX86tools). DVI and dual screen working. Ok! ICH9R SATA (Sata-AHCI in GPT) Ok! Dual LAN RTL-8110SC/8169SC Gigabit Ethernet Ok! ALC889 working OOB but speaker pops when playing sound sometimes. 2 outputs tested, line in untested. M-Audio Delta 44 - SL64 Envy24 drivers from [5] Reboot and shutdown working, OpenHaltRestart.kext used from the snowpro.zip I used in the guide. Sleep doesn't work and haven't tried to fix. Successfully updated to 10.6.1 using update package available on above thread.	Yes Vanilla	No
IP35-E	Intel P35 ICH9	Intel Core 2 Duo E8400 CPU @ 4.05GHz NVIDIA 8800GT 256MB (via EFIStudio) Chameleon 2.0 RC3 & Arial's Guide[6] All 4 SATA Ports working! Thx DuNe![7] Everything working except sleep	Yes Vanilla	No, everything except sleep

Asrock

Hardware Name	Chipset	Notes	EFI/kernel working	Fully Working w/o Patch
775Dual-VSTA	VIA PT880 Pro	Intel Core 2 Duo 2.2GHz NVIDIA GeForce 7300 GT 256MB Ok! w/ CoreVidia 1.1 VIA VT8237A Ok! w/ AppleVIAATA.kext VIA VT6102(Rhine II) Ok! w/ ViaRhine.kext and cpus=1 flag VIA VT1708/A(VIA HDA) Ok! w/ VoodooHDA.kext Snow Leopard 10A432 Ok! following instructions on [8]	Yes Vanilla	No
AliveNF7G-FullHD-R3.0	GeForce 7050PV/nForce 630a	AMD Athlon64 X2 5400+, Modbin's Test7 Kernel Installed from Retail DMG using this tutorial [9] Network working without kext, breaks when getting mail (Mail.app), using Adium and using network intensively. Integrated graphics not tested	Yes	No

Asus

INTEL CPU

Hardware Name	Chipset	Notes	EFI/kernel working	Fully Working w/o Patch
P5E	Intel (R) X38 + ICH9R	Intel E8400 CPU @ 4 Ghz Followed this guide to install from memory stick option Install Guide - DSDT and Kexts Used: Here (works 64 and 32bit Kernel) Bootloader: Boot Think v2.3 or Chameleon-2.0-RC2-r640 SMBIOS.plist AD1988bFix fakesmc NullCPUPowerManagement IOAHCIBlockStorageInjector OpenHaltRestart PlatformUUID SleepEnabler LegacyAppleYukon2 VGA: 880GTX (OK) with EFI String.	Yes	Shutdown, Restart & Sleep OK!!!!! ((2ºjazz))
Commando	P965 & Intel ICH8R, JMicron JMB363	Intel Core2Quad Q8400 @ 2,7 Ghz. Asus Commando HOWTO, com.apple.Boot.plist, boot and KEXTs used BIOS Version 1901 is a MUST, if you wish to use a Core2Quad processor! Bootloader etc.: Chameleon 2.0-RC3-r658-bin, PC EFI 10.5, fakesmc 2 SL, GPTed drive. Audio: Supreme FX (ADI AD 1988B), works with VoodooHDA.kext Version 0.2.1. Microphone not tested. LAN: Marvell Yukon 88E8056 (open IONetworkingFamily.kext->Plugins->AppleYukon2.kext->Info.plist, search for IOKitPersonality Yukon-88E8053, change the IOPCIPrimaryMatch from 0x436211ab to 0x436411ab). The other Gigabit Ethernet port runs using skge.kext. SATA works fine enabling AHCI in BIOS. IDE not tested. Optical Drive: HL-DT-ST DVDRAM GH22NS40 Reboot and Shutdown works using USBBusFix=Yes option with Chameleon-Bootloader and OpenHaltRestart.kext. Sleep/Wakeup works fine too. GeForce 7600 GT works using GraphicsEnabler=Yes and Time Machine runs using EthernetBuiltIn=Yes options with Chameleon-Bootloader.	Yes :)	No, LAN needs Info.plist change, sound VoodooHDA.kext.
P5E	Intel (R) X38 + ICH9R	Intel E8400 CPU @ 4 Ghz Followed this guide to install from memory stick option Install Guide - DSDT and Kexts Used: Here (works 64 and 32bit Kernel) Bootloader: Boot Think v2.3 or Chameleon-2.0-RC2-r640 SMBIOS.plist AD1988bFix fakesmc NullCPUPowerManagement IOAHCIBlockStorageInjector OpenHaltRestart PlatformUUID SleepEnabler LegacyAppleYukon2 VGA: 880GTX (OK) with EFI String.	Yes	Shutdown, Restart & Sleep OK!!!!! ((2ºjazz))
P5LP-LE	ICH7 SATA/ATA	Intel Pentium D 820 2.8 Ghz (vanilla kernel gives KP, MUST use patched kernel for Intel Pentium D Processors) Installed using THIS GUIDE (installed to efi partition) SATA/ATA 100% working, AppleIntelPIIXATA gave me kernel panic for ATA channel. fixed it with some googleing. (i can't remember what i used :) ) Ethernet (intel 100/PRO VE) - working with leopard kext. Sound ALC888 - working with THIS Video NVIDIA GeForce 7500LE 512Mb - 100% working with EFI String. Restart, sleep, shut down - all OK - using OpenHaltRestart.kext and Sleepenabler.kext	Yes	Audio and ATA needs patching
Maximus Formula	Intel (R) X38 + ICH9R	Intel E8400 CPU 3.60 GHz (OK) Installed with Retail DMG, from running 10.5.6. Audio: AD1988B works with: voodoohda_v021_64bit.zip Ethernet: Marvell Yukon 88E8056 works with IONetworkingFamily.kext patch Patch VGA: 9800GTX 512MB works with EFI-string, used OSX86Tools Bootloader: Boot Think v2.3 Kexts Used: NullCPUPowerManagement AppleRTC OpenHaltRestart SleepEnabler SMBIOSResolver	Yes	No. Shutdown, Restart & Sleep doesn't work. Mouse Lags.
Rampage Formula	Intel (R) X48 + ICH9R	Intel Q9650 CPU Followed this guide to install base 10.6 Snow Leo Install Guide - Install from memory stick option! Audio AD1988B works with patch: AD1988B Fix LAN works with IONetworkingFamily.kext patch LAN Fix DSDT Patched and Kexts Used: AD1988bFix fakesmc NullCPUPowerManagement IOAHCIBlockStorageInjector OpenHaltRestart PlatformUUID SleepEnabler (Sleep still doesn't work)	Yes	No. But everything works after patching except for Sleep
P5K DELUXE/WIFI-AP	Intel (R) ICH9 SATA	Intel Q6600 CPU 2.40 GHZ Audio works with the latest Voodoo Chameleon-2.0-RC2-r640 gives full 64bit Everything else works at first boot Very stable by following this GUIDE	Yes	No
P5B	Intel (R) P965 ICH8 SATA	Intel E6750 CPU 2.80 GHZ (OK) w/ Vanilla kernel 10.0.0 Front panel USB work only if Legacy USB is disabled in BIOS. ICH8 SATA (OOB) Audio: Works only with VoodooHDA.kext (32/64) in /S/L/E Ethernet: No solution (yet) for 64bit. 32bit not tested. 512MB ASUS NVIDIA 8800GT DVI (Add EFI string, OOB, Not optimal performance) Install Retail from 10.5.8 (Vanilla kernel 10.0.0 supported 32/64) w/ Chameleon 2.0 RC3	Yes	Almost
P5B-E	Intel (R) P965 ICH8 SATA	Intel E6750 CPU 2.80 GHZ (OK) ICH8 SATA (OOB) ATA OK (JMicron) in /S/L/E Audio: Works only with VoodooHDA.kext in /S/L/E Ethernet: Ok with Attansic L1 Ethernet x64 in /S/L/E : ([10]) 512MB Asus NVIDIA 7600GT 2XDVI Bi 24" screen 1920120032 OK Update Retail from 10.5.8 OK (My profile work fine after update) No Crashs on 64b but Kernel Panic on 32bit mode..	Yes	Almost
P5B-Vista Premium	Intel (R) P965 ICH8-R SATA	Intel E2160 CPU 1.80 GHz & Q9400 & Q8400 BIOS version 0902 Bootloader etc.: Chameleon 2.0-RC3-r658-bin, PC EFI 10.5, fakesmc 2 SL, GPTed drive. ICH8 SATA (OOB) & Jmicron SATA ATA OK (JMicron) in /S/L/E Audio: Works only with VoodooHDA.kext in /S/L/E Working 100% (Sound/Mic) "http://www.projectosx.com/forum/index.php?showtopic=355&st=0" Ethernet: 88E8001 Ok with skge.kext ver(0.2f) "http://www.insanelymac.com/forum/index.php?showtopic=15700" 2nd works (LAN: Marvell Yukon 88E8056 (open IONetworkingFamily.kext->Plugins->AppleYukon2.kext->Info.plist, search for IOKitPersonality Yukon-88E8053, change the IOPCIPrimaryMatch from 0x436211ab to 0x436411ab). Graphics: 512MB XFX 8800GT 512MB Working 100% Input: Dell USB keyboard (RT7D60) Microsoft USB Mouse No Crashs on 64b mode.... Shutdown/Reboot/Sleep Works 100% Vanilla Kernel (10.6.2) Patch Installer used "http://osx86.sojugarden.com/installer/"	Yes	Almost
P5GC-MX/1333	Intel (R) 945	Intel E8200 CPU 2.66GHZ SATA (OOB) ATA (OOB) Audio: Works with VoodooHDA Ethernet: works with Attansic L1 Ethernet x64 in /S/L/E 512MB XFX GeForce 8800GT works 100% Installed with PRE-INSTALL AUTOMATOR v1.1 Sleep, Shutdown, and Reboot working 100% after moving USB/PS2 5v power jumper on motherboard & disabling Legacy USB.	Yes	Almost
P5K SE/EPU	Intel (R) ICH9 SATA	Intel Q6600 CPU 2.40 GHZ (OK) 512MB ASUS NVIDIA 9400GT Silent VGA (Add EFI string,OOB,OK) ICH9 SATA (patch IOATAFamlily.kext=add ID to PLIST OF AppleIntelIIATA.KEXT) Asus WL-138g V2 (BroadCom 4318,PCI)（OOB，Detected as Airport),Attansic L1 1000M ETHERNET (NOT WORK) ALC883 [LegacyHDA for 883 + DSDT replace HDAEnabler patch on PCBETA, China Install Snow Leopard 10A432 OK (+10.5.8)+Chameleon 2.0 RC2 640 Sleep ok with Patch	Yes	No
P5K-SE	Intel P35/ICH9A	Intel Core 2 Duo [email protected],47GHz Install method: Retail 10.6 -> 10.6.1 using Software Update 2 GB DDR2 RAM 800MHz 256MB BFG 8600GT works with EFI-string Realtek ALC883: works AttansicL1 Gigabit LAN: works ICH9 SATA: works Marvell 6111 PATA: works USB: All works	Yes	No, needs patching
P5K-E	Intel (R) ICH9 SATA	Intel E6400 2.13 GHz (OK) 512MB NVIDIA 8800 GT (Add EFI string, flashed BIOS to Mac Pro variant) ICH9 SATA using DSDT patch Marvel Yukon 88E8056 add deviceid ADI AD1988B patch DSDT and use ADI1988B injector Snow Leopard 10.6 Retail using Chameleon 2.0 RC3 658 Sleep working with DSDT patch Also potentially enables SpeedStep natively.	Yes	No
P5KC	Intel (R) ICH9 SATA	Intel Q6600 CPU, Vanilla kernel ICH9 SATA (patch IOATAFamlily.kext=add ID to PLIST OF AppleIntelIIATA.KEXT) Attansic L1 Ethernet works with kext ALC883 works with VoodooHDA Shutdown/Restart works with OpenHaltRestart.kext Sleep needs this. However, VoodooHDA, OpenHaltRestart, and Ethernet have to be reloaded after waking with SleepWatcher	Yes	No
P5B-VM DO	Intel (R) ICH8/DO/DH SATA AHCI Controller	Intel E2180 2 Duo CPU 2.00 GHZ (OK) for PCBETA.COM 4 GB DDR2 RAM 256MB VGA NVIDIA 8600GT VGA (OK) Intel (R) 82566DM Gigabit Network Connection (Patch) Audio ADI AD1988 (patch) Install iDeneb10.5.6 OK UP 10.5.8 to Install Snow Leopard 10A432 Chameleon RC2	Yes	patch: ADI AD1988 + LAN Intel 82566DM + Jmicro SATA/IDE ICH8R
P5GC-VM GBL	Intel ICH7 SATA	Intel Pentium E5300 Dual Core 2.6 2 GB DDR2 RAM VGA NVIDIA GeForce 8800 GT 512MB PCI-Ex (EFI String) Realtek LAN (OOB) Audio AD1986a (VoodooHDA) Retail Install from working Leopard Kexts on EFI partition fakesmc and AppleIntellPIIXATA also DSDT patch Chameleon RC1+Bootloader 10.2 from netkas	Yes	No
P5N-D	nForce 750i	Intel Q9300 CPU 4GB of DDR2 Two 512MB 8800GT with SLI cable connected WDA-2320 Wireless PCI card Installation Installed 10.6 via this guide - Installed on MBR/HFS+ via USB Flash Drive Audio added post-install with VoodooHDA (Voodoo Pref panel did not work) Wireless (WDA-2320) worked on boot, LAN not tested, but reported to work fine Added NVInject.kext found in the linked guide, both videocards were functional on boot. I did, however, add the EFI string for the primary videocard during the step in that guide. I installed with a single 8800GT, and added the second one after successfully booting into Snow Leopard DSDT: I was unable to generate a DSDT.aml without errors, so I used the -f option to force compile. I have had no issues with this DSDT file, and was able to use the CMOS fix Boot: Used Unofficial Chameleon RC3 installer and the Chameleon RC3 boot file Kexts: AppleNForceATA.kext AppleSMBIOS.kext Disabler.kext dsmos.kext fakesmc.kext IOAHCIBlockStorageInjector.kext IOATAFamily.kext IONetworkingFamily.kext nForceLAN.kext NullCPUPowerManagement.kext NVinject.kext OpenHaltRestart.kext Extra Info: At the end of the install process, Snow Leopard returned an error that said it was unable to finish the install (tried twice). I believe this had to do with it trying to set my MBR/HFS+ partition as bootable. Regardless of this error, I was able to boot into Snow Leopard with no issues.	Chameleon RC3 - 32-bit only	Almost. Sleep, restart, and shutdown are all functional. Only audio requires the VoodooHDA.kext if you did not install it originally. SLI required NVInject.kext.
P5W DH Deluxe	Intel ICH7 SATA	Intel E7300 Core 2 Duo 2.6 Ghz 4 GB DDR2 RAM VGA NVIDIA GeForce 7600 GT 256MB PCI-Ex (EFI String) Realtek ALC882M (VoodooHDA) Retail Install Chameleon RC3 Sleep/Restart/ShutDown - work (OpenHaltRestart,SleepEnabler) All USB ports Work (delete HPET or use Disabler) Jmicron no tested	Yes	No
P5LD2 SE	Intel ICH7 SATA	Intel E4500 Core 2 Duo 2.2 2 GB DDR2 RAM VGA NVIDIA GeForce 8500 GT 512MB PCI-Ex (EFI String) Realtek 8111b (OOB) Audio AD1986a (VoodooHDA) Retail Install Kexts on EFI partition fakesmc and AppleIntellPIIXATA also DSDT patch Chameleon RC1+Bootloader 10.2 from netkas	Yes	Patch: Audio+IDE
P5Q-E	Intel P45+ICH10(OK)	Intel Q6600 CPU 2.4GHZ (Ok) 786MB NVIDIA 8800 GTX (Works with EFI Studio GTX) ICH10 SATA (OK) AttansicL1eEthernet (OK) VoodooHDA en VoodooHDAEnabler (OK) Sleep and Shutdown don't work Restart (OK)	Yes	Patch: Audio, Ethernet
P5QL-Pro (OK)(OOB)	Intel{R} P43+IHC10(OK)	Intel E2500 CPU 2.5GHZ (Ok) 512MB Point of View NVIDIA 8400 GS(Add EFI string)(OOB) ICH10 SATA (OK) AttansicL1eEthernet(OOB) VoodooHDA en VoodooHDAEnabler(OOB) Install fully working 32/64bit with this guide [11] Sleep/Restart/Shutdown(OOB)	Yes	Yes
P5QL-EM	Intel (R) ICH10R SATA	Intel E7200 CPU 2.8 GHZ (OK) 1024MB MSI NVIDIA 9400GT VGA (Add EFI string) ICH10R SATA (OK) Realtel 8111(OK) ALC1200 [use VoodooHDA.kext] Install Snow Leopard 10A432 OK with dsdt.aml +Chameleon 2.0 RC2 640 Sleep ok with OpenHaltRestart.kext	Yes	No
P5KPL-AM	Intel G31 + ICH7 VERY STABLE SYSTEM	Intel Q6600 CPU 2.4GHZ SATA (OOB) ATA (OOB) Audio: works with kext from my GUIDE Ethernet: Works only in 64bit for now 1024MB XFX GeForce 8600GT works 100% Installed with [12] Sleep, Shutdown, and Reboot working 100%	Yes	Almost - only for LAN and AUDIO
P5QL-EPU	Intel ICH10R SATA	Intel Q9550 CPU 2.83 GHZ (OK) 512MB ASUS NVIDIA 9600GSO VGA (NVEnabler 0.1, 32-bit) ICH10 SATA (may require AppleIntelPIIXATA.kext) Realtek 8111 (Works with retail, no kexts needed) Sound VIA VT1708 - works with VoodooHDA Install Snow Leopard 10A432 OK with Chameleon 2.0 RC1 431 + PC_EFI Shutdown/Restart work with OSXRestart.kext, Sleep works with sleepenabler.kext or vanilla stepping (DSDT) guide [13]	Yes	VoodooHDA only kext needed outside of E/E
P5Q Turbo	Intel ICH10R SATA	Intel Q9550 CPU 2.83 GHZ (OK) 896MB ZOTAC NVIDIA GTX260+ DVI (EFI Strings, 64-bit) ICH10R SATA (OK) Atheros L1E (OOB) VT1708S (Works with VoodooHDA) Install Snow Leopard 10A432 OK with Chameleon 2.0 RC1 431 + PC_EFI Sleep/Restart/Shutdown(With Openhaltrestart.kext).	Yes	Yes
P5Q Pro	Intel P45 & Intel ICH10R SATA	10.6.0 Retail Installation ( USED REBEL EFI as Boot Loader ) Intel E7300 CPU 2.66 GHZ @ 3.71 GHz (OK) 256MB NVIDIA 8600GT 256MB DVI (nvDarvin.kext from iDeneb) ICH10R SATA (OK) LAN working out of BOX ALC 1200 Working Line Out/In, Head Phone, Digital Out - Patching Required ( HDAEnabler.kext & AppleHDA.kext from Insanelymac ) NO Sleep •Restart/Shutdown working perfectly(With Openhaltrestart.kext)	Yes	Yes TOTALLY COMPATIBLE SYSTEM AND STABLE
P5Q Pro Turbo	Intel P45 & Intel ICH10R SATA	OS 10.6 Update & netkas 10.5 - 64bit Intel E7500 Core2DUO CPU 2.93 GHZ @ 3+ GHz 512MB NVIDIA 9400GT (EFI+NVEnabler.kext) Intel P45 & ICH10R SATA (JMicronATA.kext) LAN Intel (AttansicL1eEthernet.kext Aug 09 Version) Use VoodooHDA.kext use same kext for Asus P5q turbo kexts used in E/E: AHCIPortInjector.kext AppleRTC.kext ATAPortInjector.kext Disabler.kext dsmos.kext fakesmc.kext IOAHCIBlockStorageInjector.kext JMicronATA.kext NullCPUPowerManagement.kext NVEnabler.kext OpenHaltRestart.kext PlatformUUID.kext in S/L/E: AttansicL1eEthernet.kext Restart/Shutdown working perfectly(With Openhaltrestart.kext)	Yes	Fully Working (Stable Config & perfect high performance environment)
P5P43TD PRO	Intel ICH10R SATA	Intel Q8200 CPU 2.33 GHZ (Ok) 512MB ASUS NVIDIA 9600GT PCI-Express (Natit x64) ICH10R SATA (AppleIntelPIIXATA.kext) ALC887 (Works with VoodooHDA x64.kext) AttansicL1eEthernet (AttansicL1eEthernet.kext) Install Snow Leopard 10A432 Full Retail OK with Chameleon 2.0 RC 640 + PC_EFI 9.4 /x32 & x64 modes both works well/ No sleep yet. Shutdown/restart through OpenHaltRestart.kext	Yes	Yes
P5QL-Pro	iP45 ICH10	Intel DC E2200 CPU 2.2Ghz - Works. x64 AXLE NVIDIA 9800 GT 512 Mb DDR-3 - Works with string for 9800 GTX+ 512 Mb using Efi Studio. x64 ICH10 SATA AHCI - Works. x64 ODD - TSST 209P Sata ACHI - Works. x64 HDD - Seagate 500 Gb Sata ACHI - Works. x64 Attansic L1e - AttansicL1eEthernet.kext - Works. x64 Realtek 8139 - replace AppleRTL8139.kext in the IONetworkFamily.kext - Works. x64 ALC1200 - VoodooHDA.kext - Works with mic (!). x64 Sleep - Delete NullCpuPowerManagment.kext, SleepEnabler.kext and sometimes need to replace OpenHaltRestarter.kext to VoodooPower.kext. - Works (but only in 32 bit mode we have a Power managment) / If works with OpenHalt - x64 Restart/Shutdown - Works with VodooPower.kext. x32 / But if works OpenHalt - x64 Cambirdge Silicon Radio - Works. x64 Realtek Cardreader - Works (but need to power off before sleep). x64 Install Method - Snow OSX Universal v3.5.2 Default + BIOS mod by Jazz 0902. Bootloader - Darwin x64 Can use official update to 10.6.1 without any problems))	Yes / Vanilla x64	Yes
P5Q3	Intel P45 + ICH10R	Install Method: Empire EFI 1.04 + Snow Leopard Retail version Alternate Install Method: Snow Leopard 10.6 retail DVD from separate existing Leopard partition. BIOS Version: 0707-BIOS-Asus P5Q3 for MAC OS X & all OS by Juzzi Audio: Realtek ALC1200. Works with AppleHDA.kext from this thread [14]. Installed via KextHelper. VoodooHDA also works, but not consistently (garbled noise after waking from sleep). LAN: Realtek 8111C LAN works OOTB SATA & IDE: Works OOTB. USB: Works OOTB Firewire 400: Works OOTB Optical Drive: PIONEER DVD-RW DVR-212 works OOTB. Shutdown, reboot work. Sleep works with SleepEnabler.kext in S/E/E	PC-EFI and the Vanilla Kernel work, in 32-bit and 64-bit. Chameleon 2 RC3 installer from this thread works [15]	2x2GB RAM Core 2Quad 9550 @ 4.2GHz, ATI Radeon X1950 Series Can use official update to 10.6.2. PlatformUUID.kext is needed for Time Machine to function. Audio also needs to be patched.

AMD CPU

Hardware Name	Chipset	Notes	EFI/kernel working	Fully Working w/o Patch
M2N-E SLI	nForce500	AMD AthlonX2 5400+, 2x 7300GT, Creative Audigy2 ZS Platinum Pro Fresh retail install disk image with Chocolate Kernel BIOS Version:1201 Audio: Not Tested Graphics QE/CI Both Cards working with CoreVidia 1.1 LAN: Patched using IONetworkingFamily.Kext from M2N-E SLI CXxX USB Image CXxX Image SATA & IDE: SATA HDD work, DVD not Tested, IDE Both HDD and DVD work. Optical Drive: Works Shutdown and reboot work, sleep does not. Follow ReadMe file from CXxX image.	PC-EFI and/Chocolate Kernel works	No, needs patching from CXxX USB image (EmpireEFI+Kexts)
M2N68-VM	GeForce 7050PV/NVIDIA nForce 630a	AMD Athlon 7750BE, Modbin Test7 Kernel Installed from Retail DMG using this tutorial [16] Network working without kext Integrated graphics not tested	Restart/Shutdown work, sleep does not.
A8N-SLI Bios 1604	Foxconn GeForce 8400GS 256MB with GraphicsEnabler=yes	AMD Athlon64 3200+ Venice (Note: SSE3 Required) Bios defaults used Just install OSX10.6 (10A432) Replace boot with Chameleon RC3 boot, install modbin mach_kernel.test7 fakesmc V2 did not work for me. I used the MSI Wind version [17] nForceLAN used, shutdown working, restart too Upgraded to 10.6.1 without any problems	Yes	DSDT patch: change _NVRAIDBUS to NVRAIDBUS, apply CMOS fix AppleNForceATA or SuperNForceATA both work Use AppleAudioAC97 from leopard, volume is fixed

. .

eVGA

Hardware Name	Chipset	Notes	EFI/kernel working	Fully Working w/o Patch
780i (132-CK-NF78)	NVIDIA 780i	Vanilla kernel working Core 2 Quad Q6600 working with all 4 cores SATA working with AppleNForceATA.kext from 10.5.6 Network working with modified nForceLAN.kext Needed AppleHIDMouse.kext from 10.5.7 Sound working with voodoohda USB working with Slice's Latest Leopard kext (2.0 working)	Yes (PCEFI_V9 w/ Vanilla Kernel)	No (See notes)
eVGA x58 SLI LE	x58	Vanilla kernel working Core i7 working w/ 4 cores and 8 threads (dsdt.aml edit) Network w/ R1000SL.kext Sound working with LegacyHDA.kext USB working (2.0 working) OOTB	Yes (PCEFI_V10.5 w/ Vanilla Kernel 10.2)	No. network and audio patched w/ kexts

Foxconn

Hardware Name	Chipset	Notes	EFI/kernel working	Fully Working w/o Patch
45CMX / 45GMX	Intel 945GC/ICH7	Overall works great if except no working onboard Video. Intel GMA 945 works bad, In solution used NVIDIA GeForce 8500 GT 512MB PCI Express, Works Ok! With OSX86Tools EFI Patch, Very slow to boot but works perfectly ALC662 With Azalia.pkg only Output PS/2 Keyboard With VoodooPS2Controller.kext Snow Leopard 10A432 Ok! With Empire EFI 1.085 and myHack_installer_1.0_RC4_r50.mpkg	Yes	No, used fakesmc, NullCPUPoweManagement, OpenHaltRestart, Sleepenabler

Gigabyte

Hardware Name	Chipset	Notes	EFI/kernel working	Fully Working w/o Patch
GA-G31M-ES2L Rev 2.0	Intel G31/ICH7	Overall works great if except no working onboard LAN or Video. Install Method: Used Retail DVD plus myHack, mostly following this guide. I used a an extra IDE drive instead of a USB flash drive (with no issues). Audio: Realtek ALC883, used VoodooHDA.kext, latest update. LAN: AR8131 chip - does not work at all, used a cheap supported ethernet card instead. SATA & IDE: SATA and IDE worked fine without any bios tweaking. Optical Drive: IDE Lite-On DVD writer, no issues. For sleep I used sleepenabler.kext This guide seems to have been kept the most updated and offers solutions for any issues you would encounter with this board.	Yes	No, used fakesmc, NullCPUPoweManagement, OpenHaltRestart, Sleepenabler, VoodooHDA
GA-G31M-ES2L Rev 2.0	Intel G31/ICH7	Board works, issues with a few things. (Just built PC on 9/17/2009) Installed bootable USB with Snow Leopard and boot.plist Sound RealTek ALC883 use DSDT patch and legacy kext LAN Does NOT work OOB SATA works OOB sleep did not work OOB only patches needed are needed for most boards, DSDT, Legacy Kexts, Disabler etc C2D E8400 3G 775 45N, MEM 2GX2\|MUSHKIN 996580 DII800, VGA EVGA 256-P2-N753-TR 8600GT 256M (need EFI String), GIGABYTE GA-G31M-ES2L LGA 775 Intel G31 Micro ATX Intel Motherboard, Seagate 500 GB HD, SONY DVD-DL	Yes, Guide	No
GA-G31M-ES2L Rev 2.0	Intel G31/ICH7	A fairly straight forward install by a newbian Created a USB installer with myHack Installer 1.0 RC4.1 + DSDT Patcher Sound RealTek ALC883: Not being used so I didn't install LAN: Didn't use onboard, used Netgear GA311 SATA works OOB Sleep: SleepEnabler patch Patches: com.apple.Boot.plist, GraphicsEnabler, LegacyAppleRTC, fakesmcV2, NullCPUPowermanagement, OpenHaltRestart, PlatformUUID Celeron 430, 2GB Kingston Value RAM, Asus EN8400GS 512M, GIGABYTE GA-G31M-ES2L Rev 2.0 BIOS FB	Yes, [18]	No
GA-G41M-ES2L	Intel G41/ICH7	RebelEFI + Snow Leopard Retail Parallel ATA hang boot if IDE Controller is enabled (works with IOATAFamily fix from here) Patches: IOATAFamily Core 2 Quad 2.67GHz, 4GB MarkVision RAM, GIGABYTE GA-G41M-ES2L BIOS F3	Yes	No
GA-G31M-ES2L Rev 1.x	Intel G31/ICH7	This Board is almost flawless with Snow leopard Sound RealTek ALC883 use DSDT patch and legacy kext LAN RTL8168 works OOB but some reports that it doesn't support Bonjour SATA works OOB sleep works with sleep enabler and DSDT patch for RTC only patches needed are needed for most boards, DSDT, Legacy Kexts, Disabler etc	Yes, Used Guide	Yes
GA-G31M-S2L	Intel G31 / ICH7	Bootloader: Chameleon RC3 To install: Follow this guide [19]-all essential files are there Sound: ALC662 use this kext [20] or VoodooHDA if that doesn't work LAN: works out of the box Sleep,wake up/shutdown: all work perfectly	Yes (vanilla)	Yes
GA-EP35-DS3L	Intel P35 / ICH-9R	Using vanilla OSX Snow Leopard 10.6.0 Gold Master Sound: Realtek ALC888 - seems to be working out of the box (Chameleon might be loading the kext, idk) LAN: Realtek RTL8111B - out of the box Chipset: Intel ICH-9R - all OK except for SATA drive misdetection Install guide used: [21]
GA-EP35-DS3P	Intel P35 /ICH-9R	Sound: RealTek ALC889A - working with patch VoodooHDA [22] LAN : RTL8111B - out of the box (almost) need RealtekR1000 kext for AFP mounting Chipset ICH-9R - out of the box Install guide used: [23]	Yes	No
GA-P35-DS3	Intel P35 /ICH-9R	Installed with RebelEfi, then Chameleon on it's own partition. Sound: RealTek ALC889A - not working (i'm trying) LAN : RTL8111B - out of the box Chipset ICH-9R - out of the box Install guide used: [24] All my Extra files packed: [25]	Yes (Vanilla)	No
GA-P35-DS3R	Intel P35 /ICH-9R	This is a 100% Vanilla install with Chameleon V2 RC3 R658 on it's own partition. SL install is untouched. Sound: RealTek ALC889A - working with DSDT patch & LegacyHDA.kext LAN : RTL8111B - out of the box (almost) DSDT patch Chipset ICH-9R - out of the box Install guide used: [26]	Yes (Vanilla)	No
GA-P35-S3L (rev 1.0)	Intel P35 /ICH-9	Vanilla SL install using this guide: [27] Sound: Realtek ALC888 - works with DSDT patch & LegacyHDA.kext LAN works out of box NVIDIA GeForce 7600GT working with EFI string DSDT patch here: [28]	Yes (Vanilla)	No (requires LegacyHDA for audio, DSDT to prevent CMOS resets and sleep/shutdown kext)
GA-EP41-UD3L	Intel G41 /ICH-7	Sound: RealTek ALC888 - working with patch voodoohda LAN : RTL8111D - out of the box Chipset ICH-7 - out of the box	Yes	No
GA-EP41-UD3L	Intel G41 /ICH-7	Sound: RealTek ALC888 - working with patch LegacyHDA and a prebuild DSDT-file (files and description in method below) LAN: RTL8111D - out of the box CPU: Intel Core Duo Quad 2,83GHz Chipset ICH-7 - out of the box SATA disk - out of the box IDE DVD-RW - out of the box Graphics: NVIDIA 9500GT silent (configured with OSX86 Tools) [29] Bluetooth: ($20 Cambridge Silicon Radio) works perfect with vanilla driver, isync tested with Nokia (E71) smartphone. Method used: thebrave's blog [30] Bootloader: Chamelion 2.0-RC3 [31] (just follow instructions in doc/README to install bootblock, don't forget to copy /Extra from usb-stick to your HD's root) Bootable USB stick with Snow Leopard was build using Lifehackers description [32] Upgraded to 10.6.2 w/o problems	Yes	No
GA-EP43-DS3L [and -UD3L?]	Intel P43 / ICH10	Chipset ICH10 - needs SATA fix in DSDT or IOAHCIBlockStorageInjector.kext JMicron ATA - needs patched JMicronATA.kext Sound: RealTek ALC888 - working with DSDT (HPET & LegacyHDA) or additional patched HDA-Kext LAN : Realtek 8111C - out of the box Here is the link to the Blackosx Guide Guide And this is a guide that shows multiple ways to make a Retail Bootloader Guide (Also works with Snow Leopard Server). Be careful when upgrading to 10.6.2: panic appears and sound stops with old SleepEnabler & HDA-Kext (replace the whole Extensions folder with the 10.6.2 version and use KextUtility before rebooting) Package for 10.6 to 10.6.1 with Retail Bootloader	Yes	No
GA-EP45-DS3L	Intel P45 / ICH10	You can perform a full retail fresh 10.6 install with a genuine retail DVD with this guide and install any required extensions in Chameleon's /Extra folder leaving the retail install untouched. This guide allows for an easy upgrade to 10.6.1 via software update. Sound: RealTek ALC888 - working with DSDT patch and LegacyHDA (look at the guide for more info) LAN : Realtek 8111C - out of the box Chipset ICH-10 - out of the box To install: Follow this guide EXACTLY and expect 1-5 kernel panics before you get it right! [33] The only thing to note here is that my DWA-552 802.11N PCI card didnt work at all but that is because the drivers are not 64 bit yet	Yes	No
GA-X48-DS5	Intel X48 / ICH9	Sound: RealTek ALC889A - working with patch voodoohda.kext LAN : out of the box Chipset ICH-9 - out of the box To install: Follow blackosx guide [34] Video (HD4870): Need EVOEnabler.kext in Extra/Extensions/ in order to get to the installer	Yes	No
GA-EP45-DS3R	Intel P45 / ICH10R	To install: watch this video [35] Sound: Realtek ALC889A: FULLY working with DSDT fix [36] Chipset ICH-10R + Lan(out of the box)+Sleep+Shutdown+Restart Works fine	Yes	No
GA-EP45-UD3P	Intel P45 / ICH10R / Jmicron	Sound: Realtek ALC889A: working with patch voodoohda.kext LAN : works out of the box Chipset ICH10R SATA: need legacyappleintelPIIXATA.kext / Jmicron IDE: need legacyjmicronata.kext	Yes	No
GA-EP45-UD3P	Intel P45 / ICH10R / Jmicron	To install: Follow this guide EXACTLY at [37] Bootloader: PC EFI 10.1 Sound: Realtek ALC889A: FULLY working (analog & digital outputs) with DSDT fix + LegacyHDA.kext LAN : works out of the box FIREWIRE: works out of the box Chipset ICH10R SATA: works out of the box / Jmicron IDE: need JMicronATA.kext Sleep: works with SleepEnabler.kext Shutdown/ restart: works with OpenHaltRestart.kext Orange Icons fix: IOAHCIBlockStorageInjector.kext Used 64bit kexts: fakesmc.kext, IOAHCIBlockStorageInjector.kext, JMicronATA.kext, LegacyHDA.kext, NullCPUPowerManagement.kext, OpenHaltRestart.kext, PlatformUUID.kext & SleepEnabler.kext 32 & 64 bit mode: works without any KP ISSUES: Stop working OOB Linksys PCI WiFi wmp54gs v1.1 that works OOB on Leopard, but FIXED with a new DSDT patch	Yes	No
GA-EP45-UD3P (rev. 1.6)	Intel P45 / ICH10R / Jmicron	I installed from Retail Copy of SnowLeopard using the Lifehacker Website guide at [38]. The guide has you copy and restore the OSX Install Disc to a USB drive and then install to it; a ZIP file that includes all the customized kexts, edited DSDT and other system files necessary to get this working. Also includes the RC2 version of Chameleon as its bootloader. Bootloader: PC EFI 10.1; bootable at first from a thumbdrive; but included installation package can also be installed to main HD to boot directly. Sound: Realtek ALC889A; fully working with customized kext installer (used when creating your installation USB Drive) LAN : works out of the box on board rev 1.6; previous versions of the board need the NIC that the site recommends you install. FIREWIRE: works out of the box Chipset ICH10R SATA: works OOB (again, courtesy of customized DSDT and kexts from lifehacker) Sleep/Shutdown/Restart function correctly; though at times, I find it "loses" the keyboard or mouse; requiring you to simply unplug and re-plug them in.	Yes	No
GA-G33M-DS2R	Intel G33 / ICH9	Sound: ALC889A works with DSDT patch LAN : RTL8111B works out of box except AFP and Bonjour (You won't see neighboring hosts although the other Macs can see you.) FireWire: works out of box 32 v. 64 bit kernel & kexts: works on both modes without kernel panic RAM: works up to 8 GB (2, 4, and 8 GB was tested.) AHCI: SATA discs works with or without it (You need different modified kexts for each case.)	Yes	No
GA-P35-S3G	Intel P35 / ICH-9	Intel Core 2 Quad Q600 and Intel Core 2 Duo E7200 Sound: RealTek ALC662 - does not work LAN : Works fine! Chipset ICH-10 - out of the box AHCI mode must be ENABLED! If you have kernel panics, just clear extensions cache, and than repair premissions width KextUtility.	Yes	No
GA-945GM-S2	Intel 945/ ICH-7	Sound: ALC883 Working w/voodooHDA.kext LAN : out of the box Chipset ICH-7 - out of the box used snow leopard preinstaller : [39] Had to use Disabler.kext to disable power management or otherwise kernel panic occurred	Yes	No
GA-965P-DQ6	Intel 965P / ICH-8	Sound: ALC888 not tested --> working with patched AppleHDA [40] LAN : out of the box Chipset ICH-8 - out of the box	Yes	No
GA-EX58-EXTREME	Intel X58 1366 / ICH-10	Sound: ALC889: kext+ DSDT-patch : click me LAN : RealtekR1000.kext from Kabyl Chipset ICH-10 - out of the box Sleep: SleepENabler This Script is the definitive solution for X58 Platform: [41] My kexts: click me	Yes (Vanilla)	No
GA-EX58-UD5	Intel X58 1366 / ICH-10	CPU: Intel i7 920 RAM: 6 GB PC15000 Sound (builtin ALC889A): Didn't test as I use an external USB soundcard which worked out of the box (M-Audio Fast Track). Others have reported that it works. LAN (Realtek 8111D): Updated RealtekR1000.kext from Phystar Chipset ICH-10 - out of the box Sleep: SleepENabler Graphics: GeForce GTX 285. Needed PC-EFI v10.3 with GraphicsEnabler enabled for it to work. I followed this guide when installing: [42]. Used Chamelon 2RC3 during install and upgraded it to PC-EFI v10.3 afterwards. Neither Chamelon v2 RC3 nor PC-EFI v10.2 worked properly. PC-EFI v10.3 works perfectly.	Yes	No
GA-945GCM-S2C	Intel 945GC	Sound: RealTek ALC662 - NOT working-USB Sound Card out box LAN : RTL 8101E chip - out of the box Chipset ICH-7 - out of the box	Yes	No
GA-945GZM-S2	Intel 945GZ / ICH7	Sound: working with VoodooHDA LAN : out of the box Video: Intel 945GZ - out of the box whit GMA950 but need fix full resolutions [43] Install guide used: [44]	Yes	Yes
GA-P31-ES3G	Intel P31 + ICH7	Sound: Realtek ALC888 working with VoodooHDA , Creative SB Live 5.1 works with kxProject drivers 1.30b LAN: Realtek 8169 - out of box Sleep: not working	Yes (Vanilla)	No
GA-EP45-UD3L	Intel P45 + ICH10R Chipset	Sound: Realtek ALC888 (works with DSDT patch and LegacyHDA) LAN : Realtek 8111C (in DSDT.dsl section PEX5 - not tested) Chipset : ICH-10 (works OOB) CPU : E7400 + Asus EN8600GT 256M video (works with EFI string) + SIIG firewire PCI (works OOB) + Asus WL-138g PCI wireless (works OOB) Download V4 Pack from here -- this pack contains everything you'll need to get UD3L fully working. Follow the UD3R guide by d00m42 from the same link with these changes: Delete /Extra/DSDT.aml before first reboot (the DSDT.aml from V4 Pack is not for your mobo). SL will automatically detect all OOB compatible devices on the UD3L without a DSDT.aml. Make sure to apply "-v -x32" Chameleon flags on first reboot or your system will hang (don't need to apply these flags on subsequent reboots). Work in SL to patch DSDT. Follow instruction from V4 Pack to a tee on how to dump and patch DSDT as the code is compatible with UD3L. Do not use "-newHPET" flag to dump DSDT or SL will not detect some PCI devices that otherwise work OOB! To patch for ALC888, use exact content from code.txt in V4 Pack - pay attention to the comments in code.txt for ALC888 and edit accordingly. Replace /Extra/Extensions/LegacyHDA.kext with the LegacyHDA.kext from "4out2ins HDEF headphone" in V4 Pack's "DSDT Stuffs" directory. Reassemble DSDT and run "Kext Utility" from V4 Pack to apply all kext changes. To fix sleep/wake, tick “Restart automatically after a power failure.” box in Energy Saver. If your CPU supports 64-bit, add "arch=x86_64" to /Extra/com.apple.boot.plist. If you see "-x32", remove it. 64-bit mode runs stable on my setup. Easily upgraded to 10.6.2 with this quick guide. Remember to run Kext Utility to refresh kext cache after removing or replacing SleepEnabler.	Yes (Vanilla)	No
GA-EP45-UD3LR	Intel P45 + ICH10R Chipset	Sound: Realtek ALC888 LAN : Realtek 8111C Chipset ICH-10 - out of the box Video: None on board Used the following simple guide to set it up: click me	Yes (Vanilla)	No
GA-EP45C-DS3R	Intel P45 /ICH-10R	Sound: RealTek ALC889A - working with patched DSDT.aml Download My Extra folder from Here ([45]) It includes CMOS fix and Legacy Audio for 889A in DSDT and also includs all Kexts I Used To boot 10.6 LAN : Realtek 8111C - out of the box (almost) need RealtekR1000 kext for AFP mounting Included in my Download link Chipset: ICH-10R - out of the box	Yes (Vanilla)	No
GA-EX38-DS5	Intel X38 / ICH9R	Out of the box working without sound using Lifehacker's install guide click me Added the ALC889A kext for sound Used the OSx86 Universal Installer to get the video card and two monitors working properly	Yes (Vanilla)	No
GA-EP45-DS5	Intel P45 /ICH-10R	retail installation Sound: RealTek ALC889A - working with al889afix.kext Sleep: sleepenable.kext all working perfect :)	Yes (Vanilla)	No
GA-EP43-DS3L [and -UD3L]	Intel P43 /ICH-10R	retail installation 10.6 according to guide EP45- steps 1..6 click me , no DSDT patching applied. Sound: RealTek ALC888 - stopped working after 10.6.1 upgrade; make sure sound works in 10.6, then upgrade to 10.6.1, careful with the choice of the kexts! NVIDIA 8600GTS, or ASUS EN9400GT SILENT all working perfect, had trouble correcting sound, restored to 10.6, installed right kexts, then sound was ok in 10.6.1 also Mac OS X Server 10.6 ok	Yes no DSDT-patch just kexts	No
GA-MA790XT-UD4P	AMD 790X /SB750	Kernel: 10.2.0 kernel from Nawcom Graphic: GTX260, use PCEFI with GraphicEnabler option Sound: not work LAN: use the driver from the official site of Realtek [46] Restart/Shutdown: work with patched DSDT Sleep: not work Install Guild [47], plus you need to know how to patch DSDT and the RTC fix.	Yes	No
M61PME-S2P	AMD Phenom X3 710	Kernel: mach_kernel.test7 from modbin Graphic: PNY GeForce 8400 GS (use Chameleon rc3 with PC EFI 10.5 used OSX86Tools to install EFI) Sound: working with Voodoo sound kext LAN: using nForceLan.kext 0.64 from 10.5 Restart/Shutdown: working after DSDT patch (make sure to edit RTC set Length = 0x02 not 0x04) Sleep: not tested nForce 430 sata - used slash's kext	Yes	Yes
GA-945P-DS3	Intel 945P / ICH-7	Kernel: Vanilla (32) (Not able to work with 64bits kernel) Graphic: POV 7300GS, working by EFI-string method Sound: Working by AppleHDA_432.kext (ALC888) LAN: Works out of the box (RTL8111B) Restart/Shutdown/Sleep: perfect, 0 problems Used guide ver 0.4 from MACinized, [48] No problems after update to 10.6.1, even made a flawless install with the server edition image, (take care with com.apple.boot.plist, because adds a kernel flag "srvr", tells the computer to boot with 64 kernel)	Yes	No
GA-X48-DQ6	LGA775 & INTEL X48	Install Method: Empire EFI Audio: needs legacyHDA.kext to work LAN: RTL 811C integrated. Snow R1000 required for Bonjour to work Shutdown and reboot works. Sleep does not. Install guide used: [49] No problem with 10.6.2	Yes [50]	No
GA-P55-UD4	Intel P55 Express	Install method: Vanilla Mac OS 10.6.0 + 10.6.2 combo update. Boot loader: Chameleon 2.0-RC3. EFI environment: PC EFI 10.5 with patch for Core i5/i7. BIOS version: F4. PCB revision: 1.0. Audio: Realtek ALC888 codec, not yet working. LAN: Realtek 8111D, OK with driver in /System/Library/Extensions: Realtek R1000 (64-bit). SATA: OK Out-Of-the-Box(OOB), with SATA ports set to AHCI. Gigabyte ports require JMicronATA.kext. IDE: Not tested. Optical Drive: OK (OOB). Samsung SH-S223B. Shutdown/restart: OK, with EvOReboot.kext. Sleep: OK, requires DSDT patch. Other kexts: fakesmc.kext, PlatformUUID.kext.	Yes, vanilla.	No, kexts and DSDT patches required for shutdown/restart, sleep, LAN and audio.
GA-EP43-UD3L	Intel P43	Install method: OSX 10.6 Retail. Update to 10.6.2 working OOB. Boot loader: http://www.insanelymac.com/forum/index.php?showtopic=195248. BIOS version: F7. PCB revision: 1.0. Audio: Realtek ALC888 codec, fully working just follow instructions from guide above. LAN: Realtek 8111C, working. SATA: OK Out-Of-the-Box(OOB), with SATA ports set to AHCI. IDE: Not tested. Optical Drive: OK (OOB). LG GH22 DVD. Shutdown/restart: OK. Graphics: Asus EN 8500GT 512 MB, fully working OOB and monitor can be calibrated (Spyder 2 Pro)	Yes, vanilla.	Follow CD-ROM Guide.
GA-K8NF-9	nForce 4 (?)	BIOS Version: F11 Package with Tools: http://rapidshare.com/files/335758556/GA-K8NF-9_HackintoshPack.zip Install method: Restore OSX 10.6 Retail DVD to USB device using an already working Mac Execute myHack installer and check install options like in the attached png image Right-click the USB device in Finder, choose Information and unlock the padlock then check the box on the bottom which says something like "don't ignore user rights" Open USB device location navigate to /Extra/Extensions Copy the AppleNForceATA.kext to this location and fix the rights for this file Boot from USB device and use the usual Apple Installer like on a real Mac	?, Chocolate Kernel.	No, see there <--

. . . . . . . . . . . .

Intel

Hardware Name	Chipset	Notes	EFI/kernel working	Fully Working w/o Patch
DQ45EK	Q45, ICH10DO	Using Empire EFI for installation GeForce 9500 GT with NVEnabler 64.kext (onboard video not tested) NIC working with Intel82566MM.kext USB-hack required Audio with voodoo HDA Sleep: Not Working	Yes	No
DG31PR	Intel GMAX3100	GeForce 8400 GS Intel 9450 core 2 quad 4Gb DDr 800 MHz got audio working with the dg31pr_snow.zip package Just put the AudioHDA & HDAEnablert is S/L/E using kext helper. after system fully running and updated to 10.6.1 These is the guide I used [51] use these files I had to disable auto mode in the disk config of the dg31pr bios For NVIDIA card just add EFI strings. (fully working) great system very fast and stable!EFI/kernel working yes	Patch for sound
S975XBX2	975X	Restart not yet working (openhalt doesn't help). Sound not working (taruga 1.16 confirmed broken). IDE not working in 64-bit, 32-bit untested but rumored to work with netkas appleintelpiixata. Onboard lan not tested.	Boots in 32 and 64-bit vanilla. Need to remove appleintelpiixata or it will KernelPanic.	Almost
DP43TF	Intel P45 / ICH 10	Sound mit Voodoo HDA patch (ALC888) Firewire OOB Network with Intel82566M.kext Grafik NVIDIA 8400GS with EFI-String DSDT Patch + Chameleon USB FIX Sleep: No	Vanilla 32+64	Yes
DP35DP	Intel P35 / ICH9	Sound: IntelHDA works with VoodooHDA patch removing AppleHDA kext from /S/L/E/ folder LAN : Works with patched Intel82566MM kext FireWire: Works out of box 32/64bit kernel & kexts: Works on both modes Sleep: Not Working Shutdown/Restart: Works with OpenHaltRestart kext IMPORTANT: Patch DSDT.aml and repair permissions after first boot, otherwise KP	Yes	No
DQ965GF	Intel Q965	Install method: USBFlash boot 10.6.0 DVD Upgradable to 10.6.2 64-bit, good working without disabler, can use custom DSDT: (fix Video, sound, ethernet) BIOS Version: Last Audio: Works with patched voodooHDA for STAC9227 (Mic, Line-in works fine) Onboard LAN works with hnak AppleIntelE1000e.kext Sleep work USB & Firewire work out of the box SATA works in AHCI Mode Onboard Intel GMA3000 doesnt work, required external videocard	Chameleon 2 + Vanilla Kernel	No
DG33FB	G33 / ICH9	Sound: IntelHDA works with VoodooHDA. Use this link [52] to get the correct version of VoodooHDA. LAN : Works with patched Intel82566MM kext. You can use the 64bit version as well. Can be found on InfiniteMac. FireWire: Works out of box 32/64bit kernel & kexts: Works on both modes Shutdown/Restart: Works with OpenHaltRestart kext Graphics: An external PCIe Graphics card is required to install MAC OS X on this motherboard. Use GraphicsEnabler=Yes in Chameleon boot.plist. USB: Disable Legacy USB in Bios and enable USBBusFix in Chameleon boot.plist if you get a non working USB set. Sleep: Use SleepEnabler.kext for USB devices failing the system. HDD: Use AppleVIAATA.kext to load ATA and AHCI devices properly. SpeedStep: VoodooPowerMini.kext to enable SpeedStep. Delete AppleIntelCPUPMControl.kext after install. SMC: Use fakesmc.kext from netkas for all the juicy stuff working right. Installed using PreInstall Automater by djnitehawk[53] - Install DVD restored to a USB Drive. This will generate a motherboard specific DSDT :). Update to 10.6.1 without any more patches. Update to 10.6.2 using the method explained on netkas's site.	Yes, Vanilla	No
DG33FP	G33 / ICH9	Sound: IntelHDA works with VoodooHDA patch removing AppleHDA.kext LAN : Works with patched Intel82566MM kext FireWire: Works out of box 32/64bit kernel & kexts: Works on both modes Sleep: Not Working Shutdown/Restart: Works with OpenHaltRestart kext Installed using Boot Think 3.1.7 [54] - Install DVD restored to a partition. Bonus, it can boot any OS on another disk/partition which Chameleon can't.	Yes, Vanilla	No
DG33TL	G33	Follow Directions here Snow Leopard Install Guide	Yes, vanilla	Yes
DX58SO	Intel X58 / ICH10R	Installation by following instructions from Snow Leo Install Guide - Install from memory stick option. Sound (ALC889) works with VoodooHDA.kext 64 bit. Network works with Intel82566M.kext Sleep: Works but it doesn't go to sleep by itself. Audio doesn't work after Sleep but Sleep Audio Fix solves the issue. Kexts Used: fakesmc NullCPUPowerManagement IOAHCIBlockStorageInjector OpenHaltRestart PlatformUUID SleepEnabler	Yes, Vanila	No, but fully functional after patching.
Intel GMA 965	Intel GMAX3100	Works almost everything on 64bit and 32bit except the VGA (IntelGMAX3100) which is not working on 64bit. Must use the IOATAFamily.kext from OS X 10.5.8 and AppleIntelPIIXATA.kext from Netkas. Sound with VoodooHDA.	Yes, Vanilla	Almost, except the VGA which needs patched DSDT.aml, otherwise it needs the sleep trick to power up.
s5000xvnsasr	5000X	Dual Xeon X5450, XFX 8800Ultra, 8GB used following guide [55] with retail DVD (not upgrade). Graphics: Used OSX86tools to modify EFI string for xfx8800ultra Sound: onboard ALC260 not supported, using USB speakers (Microsoft SS80, supported OOB) SATA set to Legacy>SATA only in BIOS - disables onboard PATA SATA HD connected to SAS ports, SAS enabled, RAID disabled used kexts supplied in guide.	Yes, vanilla 64bit	No, EFI strings & kexts required
Lenovo T60 (2007-6TC)	Intel 945PM, ICH7-M/U SATA AHCI Controller	Intel T7200 2 Duo CPU 2.00 GHZ (OK) 1 GB DDR2 RAM 128MB ATI Radeon Mobility X1400 VGA (VESA mode, no driver yet) Intel Corporation PRO/1000 PL Network Connection (OK) Intel PRO/Wireless 3945ABG Network Connection(no driver) Install Snow Leopard 10a432 BOOTTHINK 2.3.18 AppleACPIPS2Nub.kext+ dsmos.kext+ IONetworkingFamily.kext+ NullCPUPowerManagement.kext+ OpenHaltRestart.kext+ PlatformUUID.kext+ VoodooHDA.kext+ VoodooPS2Controller.kext	Yes	No

. . . . . . . . . . . . .

MSI

Hardware Name	Chipset	Notes	EFI/kernel working	Fully Working w/o Patch
945P Neo3	ICH7	Bootloader: Chameleon 2 RC3 in first partition Use Blackosx guide in insanelymac generate DSDT.aml and patched using BootCD to install using Retail Snow Leopard DVD Sound kext using Leopard appleAC97Audio.kext in 32 bit Need to use EFIStudio to generate strings for ethernet and video	Yes (Vanilla)	No
P35 NEO-F	P35 ICH9	Of course you have to patch your Bios to prevent from Kernelpanics Bootloader: PC EFI v10.4 Use this package of Kexts Patch for ICH 9 in Kext-Package (Channel 5+6 not supported yet) LAN works OOTB Sound needs VoodooHDA	Yes 64bit (Vanilla)	No
P965 NEO MS-7235	P965 ICH8 (NO AHCI)	Bootloader: Chameleon RC432+boot10.1 Video:NVIDIA 8600GT/256M/DDR3 by dsdt.aml(QE/CI Works) Use Base Patch Kext:NullCPUPowerManagement.kext OpenHaltRestart.kext PlatformUUID.kext domos.kext Patch for ICH8 SATA/IDE: IOATAFamily.Kext Patch for IDE DVD : AppleVIAATA.Kext Audio:DSDT + ALC883LegacyHDA.kext	Yes (Vanilla)32/64bit	Yes
MS 7366 (P6NGM)	nforce 630i	intel core2 quad 4 Gb memory. NVIDIA GeForce 9500 GS. Install with a external disk and a external DVD drive USB( IDE - ATA not working in Leopard 10.5.5.) Install first Leopard on external Disk. Kernel 9.2 or 9.2.2 no patch except acpi fix. Reboot on Leopard using cpus=1 -x -f -v. Once in Leopard format your internal drive and install from the external DVD using the "existing Leopard install". Before reboot inject the efi string in topic 124777 (insanely) in smbios..... reboot once with -f -v arch=i386	yes vanilla 64 bits	no. No IDE No ATA no Sound
X58 Platinum SLI	X58/ICH10	Retail Snow Install w/ patched kexts. See Guide: [56] Bootloader: PCEFI 10.5 Video: ATI Radeon HD 4890 OC 1Gb (QE/CI Works) via dsdt.aml Audio: VoodooHDA - see Guide.	Yes (Vanilla 10.0.0)32/64bit	No, but only a minor inconvenience.

Shuttle

Hardware Name	Chipset	Notes	EFI/kernel working	Fully Working w/o Patch
Shuttle XPC Prima SP35P2V2	Intel P35/ICH9R	Chameleon 2.0 RC3 All kexts placed in Extra\Extensions under root Originally used kext pack and instructions from this thread [57] minus the alc662 and sleepenabler as sleep doesn't work anyway CPU: Q8400 2.66GHZ Core 2 Quad GPU: NVIDIA GeForce 8500 GT working by DSDT Audio: Realtek ALC888 Works with LegacyHDAPlatformdriver kext LAN: Works using IONetworkingFamily kext SATA: Set to AHCI in BIOS Sleep: Not working Hard drive icon: Orange icon until using IOACHIBlockStorageInjector kext from here [58]	Yes; Vanilla 64-bit	Yes
Shuttle K45/K48	Intel ICH7	Intel Core 2 Duo E7200 Chameleon RC3 Retail installation using existing mac All mods done via Extra - Stock components remain untouched. Standard kexts: fakesmc.kext, patched IOATAFamily.kext, Patched Yukon2 inside IONetworkingFamily.kext, NullCpuPowerManagement.kext, OpenHaltRestart.kext, PlatformUUID.kext, SleepEnabler.kext Audio: ALC662.kext - set output to internal speakers. Video: DSDT patch. QE/CI/CL fully functional. The DSDT Patch is crucial to the functionality of this unit. Proper DSDT can be found via google. Audio/Ethernet Show as built in. Sleep / Wake function perfectly. Time Machine functions. For all intents and purposes you will not be able to tell this is not actually a macmini by using it. SleepEnabler.kext must be updated from 10.6.1 to 10.6.2 - Othewise Apple update works. smbios edited for CPU/RAM using modded boot binary (Thus showing correct CPU	Yes; Vanilla 64/32-bit	Yes

Pegatron

Hardware Name	Chipset	Notes	EFI/kernel working	Fully Working w/o Patch
IPMTB-TK	Intel X58 Express	HP e9180t Audio: VoodooHDA (Realtek ALC888S) LAN: Intel82566MM.kext (Intel 82567V-2) SATA: Set to AHCI in BIOS Optical Drive: Reading works, Burning not tested (DVD-RAM GH40L) Sleep: Not tested	Yes	No used script [59]

Zotac

Hardware Name	Chipset	Notes	EFI/kernel working	Fully Working w/o Patch
Zotac IONITX-C-U	NVIDIA ION	Intel Atom N230 CPU 1.67GHz NVIDIA 9400M (EFI string) Ok! LAN Gigabit Ethernet (nForceLan.kext 100Mbps) Ok! ALC662 Not Working! Snow Leopard Retail Ok (Chameleon 2.0 RC3) 8/13/2009 BIOS for SATA AHCI	Yes Vanilla	No

. . .

Graphics Cards

Please specify if your card is AGP, Integrated, PCI or PCI-E.
Also, place chip and board manufacturer in their respective column.

AGP

NVIDIA

Hardware Name	Board-Manufacturer	Notes	OpenCL / QE / CI	Resolution	Fully Working w/o Patch
GeForce 6200	XFX	use dsdt.aml, dual display working	Yes	Yes	Yes
GeForce MX 440	XFX	doesn't work at all (neither QE/CI, nor a usual picture like the Installer)	none	N/A	not at all

PCI Express

ATI

Hardware Name	Board-Manufacturer	Notes	OpenCL / QE / CI	Resolution	Fully Working w/o Patch
X1300 512MB	Sapphire	Works fully using VGA output and DVI to VGA adapter. Dual display works. Sleep/Wake works. Using PC EFI v10.5.	Yes	Yes	Yes
HD 2600 512MB	MSI	doesn't work with QE under Snow Leopard because of missing openCL support	No / No	Yes, when ATIRadeonX2000.kext is removed and ATY_Init.kext installed or PC EFI with atirom+mac firmware	No
HD 4850 512MB	Asus	Does not work - garbled display	No	No	No
HD 4850 512MB	HIS	Works with PC EFI 10.5 Graphics Enabler. Sleep and Wake works too.	Yes	Yes	Yes
HD 4850 512MB	Sapphire	Works with graphics drivers for Leopard. (Is this VGA+HDMI+DVI or something else? Please write them here.)	Yes	Yes	Yes
HD 4850 1GB	GIGABYTE GV-R485MC-1GI	works 32/64 bit without HDMI-DVI-VGA dongle. PC EFI v10.5 (GraphicsEnabler=yes) and changed the device ID to 9442 in the Info.plist file of ATI4800Controller.kext. Dual display not tested.	Yes	Yes	No
HD 4870 512MB	HIS	Works with EVOenabler injector here No sleep (screen is not waking up). Dual display works.	Yes	Yes	No
HD 4870 1024MB	Sapphire	Works with EFI-string. Sleep and Wake works too.	Yes	Yes	Yes
HD 4870 1GB	XFX	Works with Enabler for NVIDIA and ATI multiple cards here	Yes	Yes	No
HD 4870 X2	Sapphire	Works with Enabler and Netkas QE patch for 10.6.1	Yes	Yes	No
HD 4890 1024MB	Visiontek	Use ExoticCardDrivers.pkg for QE/CI	Yes	Yes	No

. . . .

NVIDIA

Hardware Name	Board-Manufacturer	Notes	OpenCL / QE / CI	Resolution	Fully Working w/o Patch
9400 GT 1024MB	MSI	Needed to add EFI String. Used OSx86 Tools with the Custom entry form.	?/yes/yes	all	no
7300LE 128MB	MSI	Works with EFI-string	?/yes/yes	yes	all
7300Gs 256MB	Gigabyte	Works with EFI-string	?/yes/yes	yes	all
7300GT 256MB	Buffalo	Works with CoreVidia 1.1	?/yes/yes	all	no
7500LE 512MB	NVIDIA	Works with EFI-string	?/yes/yes	yes	all
7600 GS 512MB	NVIDIA	Works with EFI-string	?/yes/yes	all	no
7600GT 256MB	eVGA	Works with EFI-string	?/yes/yes	all	no
7800GT 256MB	XfX	Works with EFI-string	?/yes/yes	all	no
7900GS 256MB	Asus	Works with PC EFI Graphics Enabler	?/yes/yes	all	no
8400GS 256MB	Foxconn	Works with Chameleon Graphics Enabler	?/yes/yes	all	yes
8500GT 512MB	MSI	Works with EFI-string	?/yes/yes	all	no
8600GT 128MB	eVGA	Works with EFI-string	?/yes/yes	all	no
8600GT 256MB	eVGA	Working with EFI-string (Running w/ 32MB with choppy video, using wrong EFI-String??)	?	?	no
EN 8600GT 256MB	Asus/Asustek	Works with EFI-string	yes/yes/yes	all	no
8600GT 256MB	Gigabyte	Works with EFI-string	?/yes/yes	all	no
8600GT 512MB	eVGA	Works with efi-string, used OSX86Tools	?/yes/yes	all	no
8600GTS 512MB	eVGA	Works with Chameleon RC2 GraphicsEnabler=yes	?/yes/yes	all	no
8800GS 385MB	eVGA				no
8800GTS 320MB	BFG	Works with EFI string	?/yes/yes	all	no
8600GTS 512MB	eVGA	Works with Chameleon RC2 GraphicsEnabler=yes	?/yes/yes	all	no
8800GT 512MB	Zotac	Works with EFI-string, used OSX86Tools. Dual Screen working.	yes/yes/yes	all	no
8800GT 512MB	Zotac AMP!	Works with EFI-string, used OSX86Tools.	?/yes/yes	all	no
8800GT 1024MB	Generic	Works with EFI-string, used EFISTUDIO. Dual Screen working.	?/yes/yes	all	no
8800GTX 768MB	Zotac	Works with EFI-string, used EFI Studio (Dual Screen works)	?/yes/yes	all	no
9400GT 512 MB	EVGA	works with EFI-string, used OSX86Tools	?/yes/yes	all	no
9400GT 512 MB	Pixelview	works with EFI-string, used OSX86Tools	yes/yes/yes	all	no
9400GT 512 MB	MSI	works with EFI-string, used OSX86Tools	yes/yes/yes	all	no
9400 GT 1024MB	MSI	Works with dsdt	Yes/Yes/Yes	all	yes
PX9400GT 512 MB	Leadtek Winfast	works with EFI-string, used OSX86Tools	yes/yes/yes	all	no
9400 GT 512MB	ASUS	Works with EFI string generated using OSX86Tools under Leopard. String needed to be in bootloader boot.plist and systemconfiguration boot.plist and in bootloader boot.plist on the installer image to work correctly, otherwise no hardware acceleration would work for me.	yes/yes/yes	all	no
9500 GS 512MB	NVIDIA	Works with EFI string. String needed to be in apple.smbios.plist	yes/yes/yes	all	no
9500 GT 512 MB	Point of View/Palit	Works with EFI option GraphicsEnabler=Yes in Boot.plist (boot with PC-EFI 10.3)	?/yes/yes	all	yes
9500 GT 1024 MB	eVGA	Works with EFI string, using OSX86 Tools and NVCAP to generate	?/yes/yes	all	yes
9500 GT 1024 MB	XFX	Works with EFI string, using OSX86 Tools and NVCAP [60] to generate	?/yes/yes	all	yes
9600GSO 384MB	XfX	Works with NVEnabler (32-bit.)	?/yes/yes	all	?
9600GSO 512MB (note: there are different versions of the 9600GSO.)	Asus	Works with NVEnabler (32-bit.)	?/yes/yes	all	?
9600GT 512MB	Gainward	Works with Chameleon 2.0 and GraphicsEnabler=y	yes/yes/yes	all	yes
9600GT 512MB	Sparkle	Works with EFI-strings (used osx86 tools) and GraphicsEnabler=y	yes/yes/yes	all	yes
9600GT 512MB	Gigabyte	Works with EFI-string, used OSX86Tools	?/yes/yes	all	no
9600GT 1024MB	PNY	Works with EFI-string (Used string from 9800GTX 1024MB)	?/yes/yes	all	no
9800GT 512MB	Palit	Works with NVenabler [61].	?/yes/yes	all	no
9800GT 512MB	BFG	Works with efi-string	?/yes/yes	all	no
9800GTX 512MB	Zotac	Works with EFI string	yes/yes/yes	all	no
9800GTX+ 512MB	eVGA	Worked with DSDT patch on a GA-EP45-DS3L board or with string generated in EFI Studio	?/yes/yes	all	no
9800GX2 1G	WINFAST	Works with EFI String, using 9800gtx 512m for each card with the correct display number	?/yes/yes	all	no
GTS 250 512MB	eVGA	Works with EFI String	?/yes/yes	all	no
GTS 250 1024 MB	BFG	Works with EFI string, using OSX86 Tools and NVCAP [62] to generate	?/yes/yes	all	no
GTX 275 896MB	GigaByte	Works with EFI String	?/yes/yes	all	no
GTX 285 1024MB	Asus	Works with EFI String	?/yes/yes	all	?
GTX 285 1024MB	Asus	Works with EFI String	?/yes/yes	all	?
GTX 295 1792MB	EVGA Co-op	Works with EFI String and NVGTX295.Fix.kext. Checkout this all-in-one pack and install guide	Yes/Yes/Yes	all	yes

. . . . . . . . . .

Integrated

Hardware Name	Board-Manufacturer	Notes	OpenLC / QE / CI	Resolution	Fully Working w/o Patch
NVIDIA ION 256MB shared	Point of View	Works with Chamaleon RC3 GraphicsEnabler=yes	?/yes/yes	all	No, Chamaleon 2.0 GraphicsEnabler string required
Radeon Mobility HD4330	Dell	in 10.6.2 Works with Chamaleon RC3 GraphicsEnabler=yes	/yes/yes	1152x1064x32 and lower	No, Chamaleon 2.0 GraphicsEnabler string required and add dev ids to 2 kexts

Network Cards

Wireless

Interface	Standard	Device	Manufacturer	Notes	Fully Working w/o Patch
IPCI	g	TL WN551G	TP-Link	Works OOB with 32bit kernel. To enable in 64bit mode used 64bit atheros kext and added device ID.	Yes (only in 32bit mode)
PCI	n	TL-WN815N	TP-Link	In my Intel DG31PR I have to either disable HPET in bios or delete AppleHPET.kext in S/L/E for the card to be recognized. Shows as Airport Extreme (Atheros 5416) in OS X 10.5.8 or 10.6.1. The 10.6.1 kext is only 32 bit!	No
PCIe	a/b/g/n	MP2W Mini PCI-e adapter card with genuine BCM94322MC Apple Macbook Mini PCIe card	Apple	100% compatible since you're using a genuine Apple card. The BCM94321MC and AR5BXB72 also work great, although the Atheros has no x64 drivers.	Yes
PCI	a/b/g	DWL-G520 rev.B	D-Link	Works great out of the box. I dont know why some people can't get it to work. You may have to remove AppleHPET or patch it up. Its an Atheros chipset , it works only in 32-bit !	Yes
PCI	b/g	WL-138G V2	ASUS	only x32 vanilla driver, may need to remove/replace antenna if having speed issues / drop packets, common issue with this card	yes
PCI	b/g/n	DWA-552	D-Link	only x32 vanilla driver. (Netkas 64-bit kext information can be found here. This kext allows you to boot into 64-bit mode with this card. It should also work for other Atheros chipset based cards.)	yes
USB	b/g	WG111v3	Netgear	manually cp RT8186Bl.kext to /System/Library/Extensions(may need to boot with "-f" to refresh the driver cache) install netgear's driver(only select utility to connect to wireless networks, do deselect the "driver")	No
PCI	b/g	WPN311	Netgear	Watch this for help on Installation. Works as Airport! Down side, You have to boot with -x32 flag.	Yes, Only on retail Version, ONLY RETAIL VERSION.
PCI	b/g	WMP54GS v1.1	Linksys		yes
PCI	b/g/n	WMP300N-EU	Linksys	Works as Airport in 64bit mode! Need IO80211Family.kext from 10.6.2 and you must change id in AirPortAtheros21.kext in Info.plist for your WMP300N	yes
PCI	b/g/n	WMP600N	Linksys	Completely incompatible	yes
USB	b/g/n/	RT2800/2870	Ralink	Works with drivers from Ralink webpage	Yes
USB	b/g/n	802.11n	Generic	chipset RT2770 x64 vanilla driver Ralink site	yes
USB	b/g	EW7318USG	Edimax	Works with drivers from Edimax webpage (Leopard Kext, only tested with 32bit)	Yes
USB	b/g/n	EW7711UAn	Edimax	Chipset RT2870 x64 vanilla driver from Ralink site ( Drivers from Edimax Site only had up to 10.5 )	Yes

. . . . . . . . . . . . .

Wired (Ethernet)

Interface	Standard	Device	Manufacturer	Notes	Fully Working w/o Patch
USB/Ethernet	10/100	ASIX AX88772 USB 2.0 Ethernet (Nintendo Wii USB-2-LAN adapter)	ASIX	Fully Working with 64 bit	Fully Working - out of the box
Ethernet	10/100/1000	DGE-530T	D-Link	Works great with kdge.kext (rev e-u), only tried in 32-bit	No
ETHRNET	10/100/1000	Attansic L1	Attansic	Fully Working with 32/64 bit	Yes
Broadcom 5721 NetXtreme NIC	10/100/1000	Broadcom 5721	Broadcom	Fully Working with 32/64 bit	Fully Working - out of the box
Realtek R8111X	10/100/1000	R8111X	Various vendors and build-in	Working with 32/64 bit default kext from Apple but no Bonjour. Fully working with thiskext	NO
Dynex Gigabit PCI Desktop Adapter (PCI)	10/100/1000	Dynex DX-PCIGB	Dynex	Fully Working with 32/64 bit	Yes
Buffalo LGY-PCI-GT (PCI)	10/100/1000	Buffalo LGY-PCI-GT	Buffalo	Fully Working with 64 bit	Yes out of the box using AppleRTL8169Ethernet.kext. Did not try with 32 bit.
Planet ENW-9605 (PCI)	10/100/1000	Realtek 8169SC	Planet	Fully Working with 64 bit	Yes - Fully working out of the box
Ethernet	10/100	Marvell Yukon 88E8056	Marvell	Working with 32bit	Yes (link)
Ethernet	10/100	Realtek 8102E	Realtek	Fully Working with 32/64 bit	No, this kext is needed

. .

Sound Cards

Hardware Name	Manufacturer	Notes	Fully Working w/o Patch
SC004 v2 USB 5.1	Sweex		Fully Working - out of the box
Creative Live! 5.1 (RTL) PCI SB0100	Creative	works with link kxProject 1.3b kext	No
SC003 v2 USB 5.1	with microphone jack		Fully Working - out of the box
ALC 660VD	RealTek inc.		Works with VoodooHDA, No Microphone support
Hercules Dj Console	Hercules		Output - Fully working out of the box, Input - Not working
FA-101	Edirol/Roland	Have not tested input, nor all outputs. Seems to be working fine.	Yes
Creative Xmod USB	Creative		Fully Working - out of the box
Silver USB Dongle	ZAP	CM-108 chipset. You can tell before buying by downloading driver, it has lots of files named c108 or cm108.ini, inf etc.	Yes
Firewire Audiophile	M-Audio	Detected OOB. Download M-Audio beta driver for SL.	Yes, with beta driver
X-fi Titanium PCI-e	Creative	All the analogue-Out ports work Mic&S/PDIF not tested	No use link VoodooHDA
TerraTec AureonDualUSB (USB Stick)	Terratec	Works great! OOB!	Yes
Hercules Gamesurround Muse Pocket LT USB	Hercules	Works OOB. Volume controls on the box don't work, but who cares.	Yes

. . . .

Other Accessories

Type of Accessory	Item Description	Manufacturer	Notes	Fully Working w/o Patch
USB Bluetooth Dongle	USBBT100	Linksys	Tested + working with Mighty Mouse (A1197) and Morotola H550 headset.	Yes
USB Bluetooth Dongle	BTA-6210	Cirago	Shows up in system profiler and apple keyboard	Yes
USB Bluetooth Dongle	Asus USB-BT21 Mini Bluetooth Dongle	Asus	Apple wireless keyboard and Mighty Mouse working out of box, no patch	Yes
USB Bluetooth Dongle	Noname USB Bluetooth Dongle	IVT Corporation, Vendor: 00-15-83	Headset works without patch. Just plug in. Purchased in Teknikmagasinet in Sweden, its the longer "flat" model. There is no model #.	Yes
USB Bluetooth Dongle	Mini USB Bluetooth Dongle	KONIG Electronics	Its a real small USB Dongle and has a : Cambridge Silicon Radio (CSR) bluetooth chip sleep works Tested with a apple wireless keyboard.	Yes
USB Bluetooth Dongle	BTD603-132 Bluetooth Dongle	Azio Corp	It's a Cambridge Silicon Radio (CSR) bluetooth chip. Tested with Sony PS3 remote control.	Yes
Firewire	PEX1394B3	StarTech	2PORT Firewire 800 + 1PORT Firewire 400 Pci Express Card [63]	Yes
Firewire	LP-N21011-S8	SIIG	PCI Firewire 3-port 2 ext. & 1 int (400Mbps)	Yes
USB Modem	MA034	Apple		Yes
Bluetooth USB Stick	Belkin Mini Bluetooth-Adapter	Belkin	Works great! No drivers needed! OOB!	Yes
Bluetooth USB Stick	Aluratek ABD2020 BT 2.0	Aluratek	Fully compatible with OSX 10.6.2 no issues with sleep.	Yes

. . . . . . . . . . . . . .

@@ Line 683: / Line 683: @@
 |45CMX / 45GMX
 |Intel 945GC/ICH7
-|('''Leave the GUIDE link here for a method which you use to make 10.6 on this board. Thanks...''')
+|Overall works great if except no working onboard Video.
-*Overall works great if except no working onboard Video.
 *Intel GMA 945 works bad, In solution used NVIDIA GeForce 8500 GT 512MB PCI Express, Works Ok! With OSX86Tools EFI Patch, Very slow to boot but works perfectly
 *ALC662 With Azalia.pkg only Output
@@ Line 691: / Line 690: @@
 |Yes
 |No, used fakesmc, NullCPUPoweManagement, OpenHaltRestart, Sleepenabler
-|} . . . . .
+|}
 === Gigabyte ===
@@ Line 2,438: / Line 2,437: @@
 |Fully compatible with OSX 10.6.2 no issues with sleep.
 |Yes
-|} . . . . . . . . . . . . .
+|} . . . . . . . . . . . . . .

Tools

44.192.25.113

HCL 10.6.0

Revision as of 19:26, 26 January 2010

Contents

Motherboards

Abit

Asrock

Asus

eVGA

Foxconn

Gigabyte

Intel

MSI

Shuttle

Pegatron

Zotac

Graphics Cards

AGP

NVIDIA

PCI Express

ATI

NVIDIA

Integrated

Network Cards

Wireless

Wired (Ethernet)

Sound Cards

Other Accessories