HCL 10.6.2

From OSx86
(Difference between revisions)
Jump to: navigation, search
(ATI)
Line 1: Line 1:
{{Hardware_Components|10.6.2}}
 
 
==Motherboards==
 
 
=== Abit ===
 
{| class="wikitable" width="100%"
 
!Hardware Name
 
!Chipset
 
!Notes
 
!EFI/kernel working
 
!Fully Working w/o Patch
 
|-
 
|AW9D-MAX
 
|Intel 975X & ICH7
 
 
* Intel Core 2 Duo E6600 @ 2.4Ghz, 4GB RAM @ 800Mhz
 
* Installed using Snow Leopard Client Server 10.6.2 SSE2 SSE3 Intel AMD by Hazard
 
* BIOS Version: 6.00 PG 3/3/08 (15)
 
----
 
* Bootloader : Chameleon RC3 PCEFI 10.3
 
* Kernel : Legacy 10.2.0 SSE2/SSE3 Intel AMD
 
* Graphics : NVEnabler (for NVIDIA 8800GTS 512MB (G92))
 
* Audio : AppleAzaliaAudio
 
* System Support : Elliott Force Legacy RTC x86-x64, IOATAFamily Fix
 
----
 
* SATA, IDE, USB, Audio, Lan - Works
 
* RAID - download from Silicon Image official site driver for Mac
 
* Video works on all resolutions, if its not working at first boot, try rebooting.
 
* Shutdown & reboot getting stuck, sleep works
 
| Chameleon RC3,
 
Legacy 10.2.0 SSE2/SSE3 Intel AMD
 
| Yes
 
|
 
|}
 
 
=== Asrock ===
 
{| class="wikitable" width="100%"
 
!Hardware Name
 
!Chipset
 
!Notes
 
!EFI/kernel working
 
!Fully Working w/o Patch
 
|-
 
|P4i945GC
 
|Intel 945GC & ICH7
 
|
 
* Intel Pentium 4 2.8 GHz - 3GB DDR2 800
 
* Installed using Snow Leopard 10.6.1-10.6.2 SSE2-SSE3 Intel/AMD by Hazard
 
* BIOS Version: P1.30
 
----
 
* Options marked on installer:
 
* Bootloader => Chameleon RC3 PCEFI 10.3
 
* Kernel => Legacy_Kernel 10.2
 
* Graphic => NVEnabler (for 9500GT)
 
* Audio => VooDoo_HDA (RTL888)
 
* Lan => Realtek_R1000 (RTL8111DL)
 
* System Support => AppleRTC, IOATAFamily Fix, SMBIOSResolver
 
* AdditionalFonts
 
* X11
 
* Rosetta
 
* QuickTime 7
 
----
 
* SATA, IDE, USB, Audio, Lan - Works
 
* Video 9500GT - Works
 
* Shutdown & reboot ok, sleep not work at 32 bit
 
* Please Note: You must set compatible mode in the BIOS for ATA, Only primary IDE will work, so set your HDD and DVD drive up on the same channel. Also, the TVOut for the 9500GT does not work and will cause other display outputs to malfunction, unplug the TVOut to prevent this.
 
| Chameleon RC3, Legacy_Kernel 10.2.0 32-bit
 
| Yes
 
|-
 
|WolfDale 1333-D667
 
|NorthBridge: Intel i945G Revision A2 Southbridge: Intel 82801GB(ICH7/R) Revision A2
 
|
 
*Installed using Retail DVD image on chameleon boot based usb key
 
*Vanilla Kernel, Chameleon 2.0 RC4, IDE Must be set to compatible mode for ATA driver to work.
 
*Apple Software Update Works with no issues.
 
----
 
*Standard Options used with installer, removed extra language files as they are not needed in
 
*my case.
 
*Bootloader -> Chameleon 2.0 RC4
 
*Kernel -> Vanilla 10.2.0
 
*Graphics -> NVidia Geforce 8600 GTS 256MB, EFI String added to com.apple.Boot.plist. For GMA950 no EFI String and video need change AppleIntelIntegratedFrameBuffer.kext (from kexts.com) then can change display resolution and with OSX86Tools enble Quartz Extreme.
 
*QE/CI is enabled, have yet to test to make certain they are functioning.
 
*Audio -> Currently not working, perhaps VooDooHDA once an SL release is made.
 
*System Support -> FakeSMC.kext (netkas.org), PlatformUUID.kext, a third I can't remember atm,
 
*will update as I do more tests and final configuration.
 
*ETHERNET -> Works OTB.
 
----
 
*USB, SATA/IDE working but with quirks.
 
*Shutdown and Restart perfectly fine, sleep untested (I don't personally use this feature)
 
|Chameleon 2.0 RC4, Vanilla 10.2.0
 
 
 
|Yes, Some Kexts Needed
 
|-
 
|ConRoeXFire-eSATA2
 
|Intel 945P
 
|
 
* Intel Core 2 Duo E6300 1.86 GHz - 4GB DDR2 677
 
* Installed using Snow Leopard Client & Server 10.6.2 SSE2-SSE3 Intel/AMD by Hazard
 
----
 
* Options marked on installer:
 
* Bootloader => Chameleon RC3 PCEFI 10.5
 
* Kernel => Intel Atom Kernel 10.2.0
 
* Graphic => NVEnabler (for 8400GS)
 
* Audio => VooDooHDA
 
* Patches => IOATAFamily Fix, SMBIOSResolver
 
* System=> AppleRTC, PS2
 
* AdditionalFonts
 
* X11
 
* Rosetta
 
* QuickTime 7
 
----
 
* SATA, IDE, USB, Audio, Lan - Works
 
* Video 8400GT - Works
 
* Shutdown & reboot ok, sleep not tested
 
| Chameleon RC3, Intel Atom Kernel 10.2.0 64-bit
 
| Yes
 
|-
 
|Conroe1333-D667
 
|Intel 945GC & ICH7
 
|
 
* Intel Core 2 Duo E6420 2.16 GHz - 2GB DDR2 677
 
* Installed using Snow Leopard 10.6.1-10.6.2 SSE2-SSE3 Intel/AMD by Hazard
 
* BIOS Version: P1.30
 
----
 
* Options marked on installer:
 
* Mac OS X Update => 10.6.2 combo update
 
* Bootloader => Chameleon RC3 PCEFI 10.3
 
* Kernel => Intel Atom Kernel 10.2.0
 
* Graphic => NVEnabler (for 8500GT)
 
* Audio => AppleAzaliaAudio
 
* System Support => AppleRTC, IOATAFamily Fix, SMBIOSResolver
 
* AdditionalFonts
 
* X11
 
* Rosetta
 
* QuickTime 7
 
----
 
* SATA, IDE, USB, Audio, Lan - Works
 
* Video 8500GT - Works
 
* Shutdown & reboot ok, sleep not tested
 
| Chameleon RC3, Intel Atom Kernel 10.2.0 64-bit
 
| Yes
 
|-
 
|G31M-GS R2.0
 
|G31, ICH7
 
|
 
* Installation method: Flash Bios with mod([http://www.root86.org/attachment.php?attachmentid=787&d=1264175284 1]). In BIOS turn off USB 2.0 and turn on Legacy Support (otherwise OSX won't boot). Put Retail DVD 10.6 on USB Stick (second partition) and Chameleon 2.0 RC4 bootloader on first partition. Also put a SMBIOS.plist file into the "Extra" folder ([http://www.google.com/search?client=safari&rls=en&q=smbios.plist&ie=UTF-8&oe=UTF-8 2]). Boot from usb and install
 
* CPU: Core 2 Duo E7500 2,93Ghz 64Bit
 
* SATA: Works with AppleIntelPIIATA.kext
 
* IDE: Works with AppleIntelPIIATA.kext
 
* LAN: Needs RealtekR1000SL.kext
 
* Audio: Needs VoodooHDA.kext
 
* USB: Works
 
* Onboard video: No QE/CI
 
* Shutdown/Restart/Sleep: SleepEnabler kext (When u update to 10.6.2 you need to get SleepEnabler 10.6.2)
 
* You will also need fakesmc.kext
 
| Retail DVD 10.6 + Chameleon 2.0 RC4
 
| Yes, VoodooHDA and RealtekR1000SL, PLEASE be more specific methos DOES NOT work
 
|-
 
|-
 
|P4i65G
 
|865G, ICH5
 
|
 
* Installation method: Installed using 10.6 retail DVD from existing Leopard partition + 10.6.2 Combo Update.
 
* CPU: Pentium 4 Prescott 2.8Ghz no HT, used newest 10.2 "legacy_kernel"
 
* SATA: Works with AppleIntelPIIATA.kext patched for ICH5
 
* IDE: Works with AppleIntelPIIATA.kext patched for ICH5
 
* LAN: Needs PCGenRTL8139 kext
 
* Audio: Needs AppleAC97Audio kext. I used an old maxxuss one
 
* USB: Works
 
* Onboard video: No QE/CI
 
* Shutdown/Restart/Sleep: Working with OpenHaltRestart.kext for now. Board doesn't fully support S3 (fans stay on).
 
* Disabler.kext with two other kexts besides the thermal one disabled. Sorry, can't check which ones right now.
 
| PC_EFI 10.5 with DSDT, only tested 32 bit
 
| No
 
|-
 
|P45DE
 
|Intel P45, ICH10, VT1708S
 
|
 
* First to mention that i found everything i needed at this site [http://www.kexts.com]
 
* Installation method: Installed using 10.6 retail DVD, booting using usb disk with BootThik loader that you can probably create from windows - Boothink ->[[http://www.kexts.com/view/207-boot_think_v2.4.6.html]].
 
* CPU: Core 2 Duo E7500, 2,93GHz"
 
* SATA: Works out of the box all six ports
 
* IDE: Not tested
 
* LAN: Realtek RTL8111DL 10/100/1000 Mb/s - used SnowR1000 - Auto Installer -> [[http://www.kexts.com/view/142-snowr1000_-_auto_installer.html]]
 
* Audio: VIA VT 1708S Audio Codec - Used VoodooHDA v2.5.3 - tested only 2 chanels - i dont need more (have media pc for movies) -> [[http://www.kexts.com/view/189-voodoohda_v2.5.3.html]]
 
* USB: Works out of the box
 
* I did not have sleepenabler.kext instaled, so no problem with that, but i did put this kexts : [[fakesmc]].kext, NullCPUPowerManagement.kext, OpenHaltRestart.kext, PlatformUUID.kext - get them here -> [[http://www.kexts.com/view/8-essential_snow_leopard_kexts.html]]
 
* Using GeForce 9800 GT 512 MB Green Edition , works at 1024x768 out of the box, installed Snow Leopard NVEnabler and fully working everything :) both QE/CI -> [[http://www.kexts.com/view/118-snow_leopard_nvenabler.html]]
 
* Use Kext Utility x64 for SnowLeopard for repairing permisions and so on :) makes a life a lot easier -[[http://www.kexts.com/view/129-kext_utility_x64_for_snowleopard_(update).html]]
 
* UPDATE: installed chameleon 2 rc4, and also updated from 10.6.0 -> 10.6.1 -> 10.6.2 -> 10.6.3 -> 10.6.4 with apple software update
 
| Retail DVD using Bootthink 2.4.6
 
| Yes, only drivers
 
|-
 
|P43DE
 
|Intel P43, ICH10, VIA® VT1708S, VIA® VT6415
 
|
 
* Installation method: Snow Leopard 10.6 retail DVD, restored to USB Hard Drive, then booted using myHack_Installer_1.0_RC4.1_r55.mpkg (Selected only OpenHaltRestart.kext, PlatformUUID.kext, fakesmc.kext). Then updated to 10.6.2 using apple update. And combo updating the  is working too.
 
* CPU: Core 2 Duo E8200, 2,66GHz
 
* SATA: Works out of the box all six ports
 
* IDE: AppleVIAATA.kext added 0x04151106 to PATA section in Info.plist. Fully Working
 
* LAN: Realtek RTL8111DL 10/100/1000 Mb/s - RealtekR1000SL.kext
 
* Audio: VIA VT1708S - Used VoodooHDA - tested only 2 chanels - rear microphone working (need 64-bit VoodooHDA.prefPane in 64-bit to raise mic volume)
 
* USB: Works out of the box
 
* Sleep: not using maybe not working
 
* Using MSI GeForce N9800 GT 512 MB OC , Using EFI String, Fully working QE, CI, all resolution, rotation
 
* Used kext helper to install realtek1000sl and voodoohda
 
| Retail DVD using myHack_Installer_1.0_RC4.1_r55
 
| Yes, RealtekR1000SL.kext, VoodooHDA.kext and EFI String
 
|-
 
|P45R2000
 
|Intel P45, ICH10R, ALC890 Audio Codec
 
|
 
* Installation method: Snow Leopard 10.6 retail DVD, restored to USB Hard Drive, then booted using myHack R5
 
* CPU Core 3 Duo E6400 @ 3.2Ghz
 
* SATA: Works out of the box all six ports
 
* IDE: works out of the box, but I could NOT install OS X on an IDE hard drive, only on SATA
 
* LAN: Realtek RTL8111B/RTL8111C Gigabit LAN 10/100/1000 Mb/s working out of the box
 
* Audio: ALC890 Audio Codec working using VoodooHDA, sometimes sound choppy after resuming from sleep
 
* USB: Working
 
* Sleep: Working
 
* VGA: Initially tried with Radeon 4770, no solution, switched to an older ASUS nVidia 9600 GT Matrix 512MB, fully working with NVEnabler 64.kext (QE, CI, al resolutions, rotation, multi monitor)
 
* Updated to 10.6.2 using Software Update
 
| Retail DVD 10.6 + myHack RC5
 
| Yes, VoodooHDA and NVEnabler
 
|-
 
|ASRock P45XE
 
|Intel p45
 
|
 
* Installation method: Leo Hazard 10.6.0-10.6.2
 
* [[http://www.leohazard.com/download.html]]
 
* Boot with boot flags -v, cpus=1, busratio=20
 
* Use update 10.6.2
 
* Bootloader => Chameleon RC3 PCEFI 10.5
 
* Use vanilla kernel
 
 
* Graphic => Use whatever yours is, i used NVenabler for my BFG 8800 gts and it works great.
 
 
* Audio => VooDooHDA 
 
 
 
* LAN =>  Works out the box
 
 
* Patches => SMBIOSResolver ,  Sata Fix: Ahci sata fix , on CMOS  reset pick the last one.
 
 
* Once installed use kextutility to install  JMicron36xATA.kext this is for the chipset just google to find the kext. It will stop the os freezing when you copy large files eg. from your ipod or copying a dvd.
 
----
 
* Everything works perfect USB, Shutdown and Restart, system runs in 64 bit mode using both cpus cores
 
* The only problem is the sleep function.
 
|
 
* In the BIOS Use the AHCI performance settings( I think it on the first page. )
 
* Use vanilla kernel
 
* On first boot use boot flag -v -f
 
* If you get "still waiting for root device " then just restart and it should boot
 
| Yes
 
|}
 
 
=== Asus ===
 
'''INTEL CPU'''
 
{| class="wikitable" width="100%"
 
!Hardware Name
 
!Chipset
 
!Notes
 
!EFI/kernel working
 
!Fully Working w/o Patch
 
|-
 
 
|-
 
|Asus P5P43TD
 
|Intel  P43 / Intel ICH10
 
|Intel Core 2 Quad Q8300
 
'Distro: Snow Leopard 10.6.1-10.6.2 Intel AMD made by Hazard'
 
*Everything working, including audio (using ALC889a kext from hazard dvd)
 
*boot Chameleon RC3 PCEFI 10.3 (from hazard dvd)
 
*VGA: Zogis 8400GS (using nvenabler from hazard dvd)
 
|Yes: Chameleon
 
|Yes: no additional patch after the instal.
 
*Segundo Hackintosh nesta mesma config num total de 5.
 
*Hackintosh Brasil :-)
 
 
|-
 
 
 
|Asus P7P55-M
 
|Intel P55 Express
 
|Intel Cre i5 750
 
*Retail Snow Leopard, update to 10.6.3
 
*Network - R1000.kext; Audio working with VoodooHDA.kext 0.2.56 (you have to add kernel flag busratio=20 in com.apple.Boot.plist - to stop crackling)
 
*Chameleon 2.0 RC4
 
*VGA: NV GT240 - 1GB - GraphicsEnabler=Yes - Works like a charm!
 
|Yes: Chameleon
 
|No: R1000.kext, VoodooHDA.kext; kernel flags in com.apple.Boot.plist - GraphicsEnabler=Yes EthernetBuiltIn=Yes VBIOS=Yes busratio=20; volume control doesn't work, mute works
 
|-
 
|Asus P7P55D EVO
 
|Intel P55 Express
 
|Intel Core i5 750
 
* Retail Snow Leopard updated to 10.6.3
 
* Audio works with VoodooHDA.kext; LAN: works with Realtek R1000.kext
 
* BIOS to ACHI
 
* PCI EFI 10.1
 
* CPU: INTEL CORE I5 750 2.66GHZ
 
* RAM: 8GB
 
* VGA: Nvidia 280GTX
 
|Yes: Chameleon
 
|No: you need to install VoodooHDA.kext, RealtekR1000.kext
 
|-
 
|Asus P7P55D
 
|Intel P55 Express & PRO
 
|Intel Core i5 750
 
* Installed with Retail Snow Leopard and updated to 10.6.2 with Software Update
 
* Audio works with VoodooHDA.kext; LAN: works with Realtek R1000.kext
 
* PCI EFI 10.1
 
* VGA: Nvidia 9400GT works fine as does Nvidia 9500GT
 
|YES: PCI EFI 10.1
 
|No: you need to install VoodooHDA.kext, RealtekR1000.kext and NVEnabaler 64.kext
 
|-
 
|-
 
|P6T Deluxe V2
 
|X58/ ICH10R
 
|Intel Core i7-920, 2.66 GHz
 
*Graphics Palit GTX285 1gb. Works OOB
 
*SATA Works
 
*IDE Works but Boot is crazy slow
 
*USB Works
 
*LAN Works
 
*Install Method: follow this link [http://www.insanelymac.com/forum/index.php?showtopic=208724]
 
*Audio Works Including 5.1
 
*PS/2 Works 
 
*Restart and shoutdown 100%
 
 
|Yes/Vanilla
 
|No see install method
 
|-
 
|Asus IPIBL-LA (Berkley)
 
|Intel G33 Express (Northbridge) & ICH9R (Southbridge)
 
|Intel Core 2 Duo E4500/E6400
 
* Hazard Snow Leopard 10.6.1/10.6.2 Intel/AMD/Atom and updated to 10.6.3 (need new sleepenabler.kext before update)
 
* Audio- VoodooHDA; LAN: Select Marvel Yukon
 
* BIOS to ACHI
 
*iBoot + Multibeast
 
* PCI EFI 10.5
 
* RAM: 4GB
 
* VGA: Nvidia 8800GTS 640MB (Using EFI String Only 100% Functional)
 
  Nvidia 8500GT 512MB(100% Functional on 10.6.8)
 
|Yes: Chameleon
 
|No: First boot to safe mode and remove /Extra/smbios.plist. Reboot. Enjoy
 
|-
 
|P5K DELUXE/WIFI-AP
 
|Intel P35 / Intel ICH9R
 
|Intel Core 2 Quad Q8400 2.5GHz / Intel Core 2 Quad Q9550 2.83 Ghz
 
*[http://wp.me/pr9FI-aO Installed from the retail DVD] install fails, but still runs and was able to upgrade to 10.6.3
 
* VGA: Sparkle Nvidia 9800GT 1GB needs NVkushinstaller.pkg
 
*setting Dram speed to 1066 w/1066 memory locks up during install, runs fine @ 800
 
|
 
|No need to install VoodooHDA.kext for sound to work, One LAN port works OOB, onboard WiFi does not work
 
|-
 
|P5KPL-AM-EPU
 
|G31 + ICH7
 
|Intel Core 2 Quad Q6600 2.4 Ghz
 
*Ram: 4GB OCZ
 
*Video: XFX GeForce 1GB 9500GT
 
*LAN: works OOB without checking anything upon install
 
*Installation Method: Hazard's Snow Leopard 10.6.1/10.6.2 (Google it)
 
*Choices on install: OSX 10.6.2, Legacy Kernel 10.2, Chameleon2 RC3, Graphics Enabler, NVEnabler, Cmos RST Fix: Legacy AppleRTC
 
*Sata Fix: Ahci sata fix and Ioatafamily sata fix.
 
*Update to 10.6.4 apple combo update using steps for Legacy kernel here: http://www.insanelymac.com/forum/index.php?showtopic=221599&st=0
 
*Audio: Chose Apple HDA
 
USB: works
 
Shutdown/Restart/Sleep works
 
|Chameleon 2 RC3
 
|Yes w/options from DVD as outlined
 
|-
 
|P5K Premium/Wifi-AP
 
|Intel ICH9R SATA
 
|Intel Q9400 CPU 2.66 GHz
 
*8400GS (256MB) works fully with EFI-Strings or NVEnabler
 
*2x2GB 800 MHz Ram
 
*Audio - works with the latest Voodoo (Output and Inputs)
 
*Ethernet - Works
 
*Wireless b/g - Works (see patches column)
 
*USB - All Work
 
*PATA - cba...
 
*ICH9R - Works
 
*Install Method: Retail Disk Image boot then Apple Software Update to 10.6.3.
 
*Shutdown/Reboot/Sleep work 99.9% of the time.
 
|Chameleon
 
|
 
'''Patches'''
 
*[http://eurico.net/files/driver_wlan_usb_snow.zip Realtek Wireless (RTL8187B)]
 
*[http://www.insanelymac.com/forum/index.php?act=attach&type=post&id=52431 Audio (VoodooHDA)]
 
 
 
 
32bit NOT 64bit
 
|-
 
|P5K-VM
 
|Intel G33 + ICH9
 
|Intel Core2Duo E4500 CPU @ 2.2 Ghz
 
*Installed Retail Snow Leopard Working 10.6 Combo Updated to 10.6.2 BlackCH Guide
 
*DSDT 3.3 [http://www.insanelymac.com/forum/index.php?showtopic=62111&st=860 Here]
 
*Bootloader: Chameleon-2.0-RC3 + PC EFi 10.6 on EFI Partition
 
*Extra Folder Contain smbios.plist, com.apple.boot.plist, DSDT.AML
 
*Extentsions Folder Contains fakesmc.kext,P5k-VM Kext
 
*ShutDown, Sleep, Restart, Speed Step Working 100 %
 
*On Board VGA = unknown
 
*Sound Working = Stereo, 5.1 & 7.1 channel
 
*VGA: 9600 GT (OK) with EFI String.
 
*System Profiler Hack to show Pci Cards [http://www.insanelymac.com/forum/index.php?showtopic=62111&st=940 Here]
 
|Yes Both 32 & 64 bit
 
|Yes
 
|-
 
|P5E
 
|Intel (R) X38 + ICH9R
 
|Intel E8400 CPU @ 4 Ghz
 
*Followed this guide to install from memory stick option [http://www.insanelymac.com/forum/index.php?showtopic=180954 Install Guide] -
 
DSDT and Kexts Used (10.6 and 10.6.1): [http://www.mediafire.com/?sharekey=8b2eb487d629f2726e7203eb87368129e04e75f6e8ebb871 Here]
 
replace with these [http://www.mediafire.com/?mjmyndmmt2a KEXTS] to install 10.6.2 combo updater LATER
 
(works 64 and 32bit Kernel)
 
*Bootloader: Boot Think v2.3 or Chameleon-2.0-RC2-r640
 
*SMBIOS.plist
 
*AD1988bFix
 
*[[fakesmc]]
 
*NullCPUPowerManagement
 
*IOAHCIBlockStorageInjector
 
*OpenHaltRestart
 
*PlatformUUID
 
*[[SleepEnabler]]
 
*LegacyAppleYukon2
 
*VGA: 8800 GTX (OK) with EFI String.
 
|Yes
 
|Shutdown, Restart & Sleep OK!!!!!  ((2ºjazz))
 
|-
 
|Stripped Down Gene Rampage II
 
|X58
 
|Installation Method, A combination of Lifehacker's Guide + Helpful Data from [http://www.insanelymac.com/forum/index.php?showtopic=201758&st=0&gopid=1400654&#entry1400654] + Retail 10.6 + Boot CD from previous link + Chameleon 2 RC4
 
* This board is a part of the Asus Essentio CG5290-BP007 and includes Intel Core i7 2.66, 9 GB of Ram, 1 TB harddrive, and Nvidia 896 MB 260 GTX
 
* Out of the box graphics card recognized, Ethernet recognized, USB works.
 
* Updated to 10.6.2 and all available updates without any issues.
 
* Only seems to work in 64 bit mode, when I forced 32 bit mode KP crash.
 
* No sound until a specific version VoodooHDA found, Link to my extra's folder here [http://www.insanelymac.com/forum/index.php?act=attach&type=post&id=66589 EXTRAS]
 
* Kexts used: fakesmc, IOAHCIBlockStorageInjector.kext, JMicronATA.kext, LegacyjMB36xSATA, OpenHaltRestart, VoodooHDA, HDAEnabler
 
* Shut Down, and Restart work, sleep doesn't work.
 
* My wifi usb linksys wusb100 v2 stick with the Ralink 2870 chipset works great in 64bit with this '''driver''' [http://www.ralinktech.com/license_us.php?n=3&p=0&t=U0wyRnpjMlYwY3k4eU1EQTVMekV5THpNeEwyUnZkMjVzYjJGa05ESXpOVGszT1RFeU1TNWtiV2M5UFQxU1ZGVlRRaUJFTWpnM01DMHlMakF1TVM0d0lGVkpMVEl1TUM0d0xqQmZNakF3T1Y4eE1sOHpNQT09Qw%3D%3D]
 
* My setup is a dual boot with windows 7
 
|Vanilla 64 bit Kernel, Chameleon 2 RC4
 
|No. Sound doesn't work without VoodooHDA
 
No. USB wifi doesn't work without external driver
 
|-
 
|P5B-V,
 
|P965, ICH8, JMicron JMB363
 
|
 
* Installation method: my custom [http://dl.dropbox.com/u/750399/OSx86/UNIBOOTEX/BootCD%20Snow%20by%20rzooff.iso.zip BootCD] + Retail 10.6 + Combo Update
 
* G695 works OOTB
 
* ICH8, JMicron - works: Legacy kexts
 
* SATA Devices - works, IDE Devices - unknown
 
* LAN: Marvell 88E8001 - skge.kext
 
* Audio: AD1988A - works: VoodooHDA.
 
* USB - works: fully with patch or Chameleon's USB FIX option.
 
* Onboard GPU: GMA X3000 - not working (only VESA)
 
* ShutDown,Restart,Sleep: works with EvOreboot.kext & SleepEnabler.kext (need to fix USB first)
 
|Chameleon 2 RC3, Vanilla kernel 32-bit & 64-bit
 
|No. Onboard GPU doesn't work.
 
|-
 
|P5Q3
 
|P45, ICH10
 
|
 
* Installation method: Installed using 10.6 retail DVD from existing Leopard partition + 10.6.2 Combo Update. 
 
* SATA: Works 
 
* IDE: untested
 
* JMicron: untested
 
* LAN: Realtek 8111C.  Works OOTB
 
* Audio: Realtek ALC1200. Works using modified AppleHDA.kext from this thread.[http://www.insanelymac.com/forum/index.php?showtopic=161430&pid=1130113&mode=threaded&start=], installed via KextHelper.  VoodooHDA also works, but not consistently (garbled sound after waking from sleep).   
 
* USB : Works OOTB
 
* Firewire 400: Works OOTB
 
* ShutDown,Restart,Sleep: Shutdown and restart work.  Sleep works with SleepEnabler.kext
 
* PlatformUUID.kext is required for Time Machine to function [http://www.insanelymac.com/forum/index.php?s=&showtopic=197678&view=findpost&p=1341776]. 
 
|Works fine using Chameleon 2 RC3 installer from this thread [http://www.insanelymac.com/forum/index.php?showtopic=184714], Vanilla kernel 32-bit & 64-bit
 
|No. Kexts required for Audio, and sleep functionality.
 
|-
 
|P5Q Premium
 
|P45, ICH10R
 
|
 
* Installation method: Installed using SnowOSX Universal v3.6. 
 
* SATA: Works 
 
* IDE: untested
 
* LAN: Marvell 88E8056. Works after manual installing LegacyYukon2.kext (ATools from same disk)
 
* Audio: untested
 
* USB : Works OOTB
 
* Firewire 400: Works
 
* ShutDown,Restart,Sleep: Works OOTB.
 
BIOS flashing required, see [http://www.applelife.ru/topic/9948-p5q-pro/page__st__1400], Kext installation required for LAN.
 
|Works fine using Chameleon 2 RC3 bootloader located on same disk
 
|No
 
|-
 
|P5Q SE
 
|P45 + ICH10
 
|Core2Duo E8400 3 Ghz - 3GB DDR2 800
 
*Installed using Hazard's Snow Leopard 10.6.1 - 10.6.2
 
*Bios by Juzzi: 1002-BIOS-Asus_P5Q_SE_for_MAC_OS_X___VISTA_SLIC_all_OS
 
*SATA AHCI enabled. SATA HD & USB DVD for install disc (once installed, SATA changed to IDE mode and still works fine!)
 
*Options marked on installer:
 
*-10.6.1
 
*-10.6.2 combo update
 
*-Bootloader: Cham 10.5
 
*-No kernel selected (default)
 
*-graphicsenabler
 
*-nvinject
 
*-FakeSMC
 
*-x11
 
*-roseta
 
*-quicktime7
 
*SATA: Works OOB
 
*USB: Works OOB
 
*Audio: Woks OOB
 
*Lan: Works OOB
 
*Video: Asus ENGTX260 works OOB. even 3D games
 
* Shutdown ok, sleep fails, reboot ok
 
*Aprl-2010: 10.6.3 comboUpdt installed successfully after deleting sleepenabler.kext
 
*Updated to 10.6.4, 10.6.5 and 10.6.6 straight from SoftwareUpdate.
 
|?
 
|No. Bios flashing required. No Sleep (SleepEnabler.kext were there, but never worked) . Audio wrecked after failed sleeping.
 
|-
 
|P5Q SE-2
 
|P45 + ICH10
 
|Intel Core 2 Duo 2.6 Ghz
 
*SnowX3.6 (10.6.2)
 
* No. Bios flashing required.
 
*Flash Settings
 
*AHCI Mode SATA
 
*S3 ACPI
 
*Packages
 
*Chamelon 2.RC4
 
*DSTDT
 
*Rosetta
 
*Video nVidia 9400 GT 1024MB
 
*Shutdown Reboot Sleep OK
 
|?
 
|10.5.X Leopard Based DVD-Rom Boot Settings(ACPI S3,ACPI 2.0 Enable,APIC Disable).
 
|-
 
| P5KPL-CM
 
| Intel P35 + ICH9R Intel ICH7
 
|
 
* Install Method: Retail install on another mac + Chameleon 2
 
* BIOS Version: not flashed.
 
* VIA VT1708B: VoodooHDA
 
* PCIe Gigabit LAN : AttansicL1eEthernet
 
* SATA: Works
 
* PATA: Installation won't start, Works ofter install
 
* USB: Ok
 
* Intel GMA 3100: Not Supported
 
* PCIe x16: GTX 275 (Working Perfectly)
 
|
 
| Installed using SATA HDD. Shutdown and Restart work. Installed audio and LAN with OSX86Tools
 
|-
 
|P5KPL-E
 
|G31 + ICH7
 
|
 
*Installation Method: Retail Installed to SATA (Installation via Boot132)
 
*64 Bit Enabled (arch=x86_64)
 
*Kexts: fakesmc.kext, PlatformUUID.kext
 
*No DSDT.aml needed (when present causes sleep problems)
 
*CPU: Intel Pentium Dual Core E6750 2.6 Ghz
 
*SATA: Bios Settings: Under Drive Configuration, Choose Enhanced (with SATA DVD)
 
*Video: onboard Intel GMA
 
*LAN: [http://www.applelife.ru/topic/19090-macosx-106-установка-на-pc/ AttansicL1 64 Bit]
 
*Audio: [http://www.insanelymac.com/forum/index.php?showtopic=189934&st=0&p=1410179&#entry1410179 Voodoo HDA]
 
*USB: Works (Detected as Built-In)
 
*Shutdown Reboot Sleep OK
 
|Yes: Vanilla 32 Bit, Vanilla 64 Bit
 
|No
 
|-
 
 
|P5QPL-AM
 
|G41 + ICH7
 
|
 
*Installation Method: Retail Installed to SATA from another Mac + Chameleon 2 RC4 + Kexts (Installation via Boot132 + Retail Fails Mid-Install)
 
*64 Bit Enabled (arch=x86_64)
 
*Kexts: evOreboot.kext, fakesmc.kext, PlatformUUID.kext, NVEnabler 64.kext (for Resolution Change)
 
*No DSDT.aml needed (when present causes sleep problems)
 
*CPU: Intel Pentium Dual Core E6300 2.8 Ghz
 
*SATA: Bios Settings: Under Drive Configuration, Choose Compatible, SATA Only (to get IDE DVD working)
 
*Video: MSI nVidia 9500 GT 512MB, both GraphicsEnabler and NVEnabler 64.kext work (X4500 not used due to lack of compatibility)
 
*LAN: [http://www.applelife.ru/topic/19090-macosx-106-установка-на-pc/ AttansicL1e 64 Bit]
 
*Audio: [http://www.insanelymac.com/forum/index.php?showtopic=189934&st=0&p=1410179&#entry1410179 Voodoo HDA]
 
*USB: Works (Detected as Built-In)
 
*Shutdown Reboot Sleep OK
 
 
|Yes: Vanilla 32 Bit, Vanilla 64 Bit
 
|No-Requires PS/2 .kext but lion won't boot until a usb/bluetooth keyboard is plugged in for the first time.
 
|-
 
 
|P5Q
 
|(P45 / ICH10R )
 
|* Flash Bios and install with Snow 10.6.2 by Hazzard
 
* After flash Bios, change SATA to AHCI
 
* Lan : Atheros Full    ( Check Fix Atheros in driver )
 
* Sound : ALC 1200 Full ( Not check in driver )
 
* Restart+Shutdown work perfect
 
* Sleep not test
 
* Note : Don't check anything if you don't know.
 
* Video : NVIDIA 7600GS 256MB - check Graphic Enable in driver - full working
 
* ATA - Marvell 6XXX - work ok
 
* USB - Full
 
* eSATA not test
 
* I've tested with CPU E7400, and don't check any kernel. Ram 2GB 1066 => Work OK
 
| Don't check Any kernel. Kernel default
 
| Yes: Use 132Jupiter or 132Marvell boot disk. Then boot retail Snow Leopard 10.6.
 
 
|-
 
|-
 
|P5QL-E
 
|P43 + ICH10R
 
|
 
* INTEL Core 2 Duo 2,80 Ghz Processor.
 
* RAM: 4 GiB DDR2 1066 Kingston.
 
* Install method: SnowOSX Universal 10.6.2
 
* Patched BIOS (version 1005... try [http://depositfiles.com/es/files/kxy3orj48 "BIOS for Mac OS X and all OS version"] or [http://depositfiles.com/es/files/enwsxvfbd "BIOS for Mac OS X, vista and all OS version"])
 
* Video: NVIDIA 8400 GS 512MB. 3D and full resolution doesn't work without installing [http://www.kexts.com/view/170-videocards_(nvidia)_10.6_(86-64).html]
 
* Restart + Shutdown works fine
 
* Sleep not tested
 
* USB: Working fine
 
* PS/2 mouse and keyboard doesn't work without some PS/2 kexts (ApplePS2x64, included in [http://www.mediafire.com/download.php?tiduf1rwmnm this zip file (Snow Leopard Kexts.zip)]. Set of kexts collected and downloaded from [http://darwinx86.org/ DarwinX86] site.
 
* SATA (HDs & DVD-RW) works fine
 
* Sound (Realtek ALC1200 -Onboard-): doesn't work without installing [http://www.insanelymac.com/forum/index.php?act=attach&type=post&id=61641ALC1200_1062 AppleHDA.kext], but I've noted system have given me some errors (in multiple installations and using different SnowOSX U. 3.6 install DVDs) in LegacyAppleAHCIPort.kext and LegacyIOAHCIBlockStorage.kext extensions and some components, like sound, failed. I had to [http://www.mediafire.com/?zynoao5wmvz download] (found trough [http://www.insanelymac.com/forum/index.php?showtopic=129279&pid=933303&mode=threaded&start=#entry933303 this site] and install those kexts manually. Then, sometimes it starts without audio (and it doesn't detect any audio device), I don't know the reason. When it starts with audio, it works fine.
 
* Firewire not tested (but it should work in 10.6.2: in 10.5.7 it seems some drivers was loaded during startup)
 
* IDE doesn't work
 
* eSATA not tested
 
* LAN Atheros LE1: detected and works fine. You can also use the [http://code.google.com/p/iats/ drivers provided by iats (Atheros Ethernet Network Driver for Mac OS X) project] (in Google Code)
 
| Default installer options (Chameleon v2).
 
| No
 
 
|-
 
|-
 
|P5GC-MX/1333
 
|Intel 945GC / Intel ICH7
 
|Intel E7500 CPU 2.93GHz / FSB 1066 MHz / 4GB RAM DDR2
 
*Hazard's Snow Leopard Distro 10.6.1 - 10.6.2
 
*'''S-ATA:''' [OOB] /*Out Of the Box*/
 
*'''Audio:''' [OOB] (With this SL distro) /*Out Of the Box*/
 
*'''USB:''' [OOB] /*Out Of the Box*/
 
*'''Ethernet:''' Attansic L2 [http://code.google.com/p/iats/downloads/list]
 
*'''WLAN:''' D-Link DWL-G122 Rev. B1 [http://www.insanelymac.com/forum/index.php?showtopic=33896&hl=prasys with Prasys RT2500 USB drivers]
 
*'''VGA:''' [NTY] /*Not Tested Yet*/
 
*'''PCIe:''' XFX GeForce 9500GT 512MB DDR3 working 100% QE/CI Enabled (With this SL distro)
 
*Sleep, Shutdown, and Reboot working 100% after moving USB|PS/2 5v Power Jumper on motherboard & disabling Legacy USB.
 
|Yes
 
|Almost
 
|-
 
|P5KC, P5K, P5KR
 
|P35 + ICH9, JMicron JMB363
 
|BIOS crossflashed for P5K and P5KC to P5KR with: afudos /iP5KR.ROM /n to enable SATA AHCI (used [http://koda.nokytech.net/KodaKey/KodaKeyCD_v0.8_EN.7z Kodakey.iso])
 
Core 2 Duo E6750 @ 2.66GHz / 4x2GB RAM DDR2
 
 
*JMicron: JMicronATA.kext, AppleVIATA.kext, AppleAHCIPort.kext
 
*Ethernet: AttansicL1Ethernet.kext
 
*SMC: fakeSMC.kext
 
*Audio: LegacyHdaDriver.kext
 
*bootloader: [http://www.insanelymac.com/forum/index.php?s=&showtopic=188920&view=findpost&p=1378586 Revolution v4.0]
 
*SSDT: MCDP, Speedstep, MCHC, EHC, SBUS, Audio, LPCB, GFX0, Lan, Firewire, SATA, USB
 
*Sleep, Wake, Shutoff, Reload all working
 
 
[http://www.insanelymac.com/forum/index.php?showtopic=194759 Install Guide] + [http://www.mediafire.com/?ywdtznzkayu Download]
 
|Yes / Vanilla
 
|Yes, except for jmicron
 
|-
 
|G60VX
 
|Intel PM45 rev. 07/Intel 82801IM (ICH9-M) rev. 03
 
|Hangs before GUI Install.
 
|NO
 
|NO
 
|-
 
|Striker II NSE
 
|Q6600 CPU @ 2.4 Ghz
 
|
 
*After installing IPC 10.5.6 Followed youtube video [http://www.youtube.com/watch?v=MdaUU0pNLBQ&feature=related] after you install snowleopard put these kexts into your extra/extensions folder [http://rs725l3.rapidshare.com/cgi-bin/upload.cgi?rsuploadid=126211345676230574]
 
* Sound works no digital audio yet but option is there...airfoil is what I used to get audio to stream to airport express for the time being. Also if using vlc delay audio to -2100.
 
* Gtx280 works hdmi full 1080p OOB
 
* Ide works OOB
 
* Sata works
 
* Usb works
 
* Esata rocketraid 2302 Enable plug and play OS in bios then it works
 
* Torrenting seems to crash pc tested transmission and azerus so far
 
|Vanila
 
|NO
 
|-
 
|[http://www.asus.com/Motherboards/Intel_Socket_1156/P7H55DM_EVO/ P7H55D-M EVO]
 
|Intel H55
 
|<b>System:</b> Intel Core i5-650, 4 GB RAM, 2 x 500GB Seagate HD SATA, GeForce GT 9500 1 GB<br><br>
 
<b>Installation:</b> iBoot (3.1.0) + Multibeast (3.7.3). Installed from the original Snow Leopard 10.6.0 DVD and then upgraded (via ComboUpdate) to 10.6.2. Multibeast: used the EasyBeast Install and applied the patches. No custom DSDT used. Monitor connected via DVI.<br><br>
 
<b>Video:</b> Out of the box<br><br>
 
<b>Audio:</b> VoodooHDA 0.2.72 (microphone not working)<br><br>
 
<b>Ethernet:</b> Lnx2Mac's RealtekRTL81xx<br><br>
 
<b>USB:</b> Out of the box<br><br>
 
<b>SATA/IDE:</b> Out of the box<br><br>
 
|Patches applied via Multibeast:<br><br>
 
VoodooHDA 0.2.72<br><br>
 
Lnx2Mac's RealtekRTL81xx
 
|Yes
 
|Yes
 
|-
 
 
|}
 
 
'''AMD CPU'''
 
{| class="wikitable" width="100%"
 
!Hardware Name
 
!Chipset
 
!Notes
 
!EFI/kernel working
 
!Fully Working w/o Patch
 
|-
 
|M2N-E
 
|nForce 570
 
|
 
Used [Intel/AMD] Snow Leopard 10.6.1-10.6.2 SSE2-SSE3 Intel/AMD by Hazard
 
 
* Installation method: from Mac Os X 10.5.8 on separate HDD
 
* CPU: AMD Athlon64 x2 4600+, used newest 10.2 "legacy_kernel"
 
* SATA: Works with IOATAFamily_SATA_Fix.kext
 
* IDE: Works with IOATAFamily_Fix.kext
 
* LAN: Works
 
* Audio: Needs AppleAzalia and HDAEnabler kexts. Which one works I don't know, but it works.
 
* USB: Works
 
* Video: nVidia 7300GT works with NVEnabler
 
* Additional choose AMD and dont choose bootloader
 
* CMOS: LegacyAppleRTC
 
| only tested 32 bit
 
| yes
 
|-
 
|M2N-SLI DELUXE
 
|nForce 570
 
|
 
Used [Intel/AMD] Snow Leopard 10.6.1-10.6.2 SSE2-SSE3 Intel/AMD by Hazard
 
 
* Installation method: from DVD
 
* CPU: AMD Athlon64 3800+, used Legacy Kernel 10.2
 
* SATA: Works
 
* IDE: Works
 
* WLAN: D-Link DWL-G510, works with IO80211Family.kext from here: http://www.insanelymac.com/forum/index.php?showtopic=211284
 
* Audio: Works with AD1988b-Fix
 
* USB: Works
 
* Video: nVidia 9800GT works with NVEnabler
 
* CMOS: ElliotForceLegacyRTC
 
* Additional: AMD, X11, and Rosetta
 
| only tested 32 bit
 
| yes
 
|-
 
|M2N-SLI DELUXE
 
|nForce 570
 
|
 
Used: SnowLeo Mac OSX86 for intel/AMD (32/64) ENG
 
 
* Installation method: from DVD on sata HDD
 
* CPU: AMD Athlon64 x2 5200+, used Coco Kernel
 
* CHIPSET nForce 570: Works with Nforce ATA
 
* SATA: Works
 
* IDE: Works
 
* LAN: Works with NforceLan
 
* Audio: Works with "Taruga_AD1988b_rev4_Installer"
 
* USB: Works
 
* Video nVidia 8600GT: works with NVEnabler
 
* Additional: AMD patch, Rosetta, X11User, bootloader Chameleon RC4 PC-EFI 10.5 (asereBLN).
 
 
| only tested 32 bit, All work fine
 
| yes
 
|-
 
|M2N-TE (Targa Edition)
 
|NVIDIA® nForce® MCP 55S
 
|
 
Used [Intel/AMD] Snow Leopard 10.6.1-10.6.2 SSE2-SSE3 Intel/AMD by Hazard
 
 
* Installation method: from IDE DVD on SATA HD
 
* CPU: AMD Athlon64 x2 4600+, used newest 10.2 "legacy_kernel"
 
* SATA: Works
 
* IDE: Works
 
* LAN: Works
 
* Audio: Still looking for a solution
 
* USB: Works
 
* Video: nVidia GFORCE 8800 GTX works with EFI Tools after installation
 
* Additional choose AMD and dont choose bootloader
 
* CMOS: LegacyAppleRTC
 
| only tested 32 bit
 
| yes
 
|-
 
|M2N68-LA
 
|nForce 430
 
|
 
* Installation method: from plain iPC Mac OS X 10.5.6 on separate HDD, using 10.6.0 retail and installing delta upgrade
 
* CPU: AMD Athlon64 x2 5200+, used modbin's test7 kernel (10.6.0, be sure to replace after 10.6.2 upgrade)
 
* SATA/IDE: Works using Slashhack's AppleNForceATA kext (stable with 4+GB RAM)
 
* Optical: Only works with MeDevil's AppleNForceATA 32-bit kext (must limit to 2GB RAM)
 
* LAN: nForceLAN kext
 
* Audio: Analog & Digital work using marionez's ALC1200 Snow Leopard Driver [http://www.insanelymac.com/forum/index.php?showtopic=161430&pid=1130113&mode=threaded&start=])
 
* USB: Works
 
* Video: Onboard video won't work with QE/CI. Added PCIe GeForce 8400 w/ EFI String (OSx86Tools) in boot plist to get QE/CI.
 
* Note: This is on a HP m8000n
 
|Yes, Chameleon 2 (RC4 w/ [http://www.insanelymac.com/forum/index.php?showtopic=201902&pid=1360125&mode=threaded&start=#entry1360125 rekursor patch]), modbin test7 kernel, 32&64-bit patched audio driver, modbin kernel, onboard GPU has no QE/CI support.
 
|-
 
|M2N-X
 
|nForce 520
 
|
 
Used [Intel/AMD] Snow Leopard 10.6.1-10.6.2 SSE2-SSE3 Intel/AMD by Hazard
 
 
* Installation method: from ide Drive to sata HDD
 
* CPU: AMD Athlon64 x2 5200+
 
* SATA: Works
 
* IDE: dvd works drive not tested
 
* LAN: not tested, have working wifi with realtek usb adapter
 
* Audio: use c-media usb
 
* USB: Works ( disable Legacy in bios )
 
* Video: geforce 210 (http://www.kexts.com/downloads.php?do=file&id=431)
 
| yes ( used legacy_kernel )
 
| yes
 
|-
 
 
 
 
 
|M2N
 
|nForce 430
 
|
 
Used [Intel/AMD] Snow Leopard 10.6.1-10.6.2 SSE2-SSE3 Intel/AMD by Hazard
 
 
* Installation method: from SATA DVD Drive to IDE HDD
 
* CPU: AMD Athlon64 x2 4400+
 
* SATA: Works ( couldn't install to SATA HDD, but it is recognized after install, sata dvd drive works )
 
* IDE: Works
 
* LAN: not tested, have working wifi with Dlink usb adapter )
 
* Audio: Needs AppleAzalia kext. Cannot change volume with keyboard, only from system prefs.
 
* USB: Works ( disable Legacy in bios )
 
* Video: ATI HD 4650 ( needs 10.6.2 update, ATI4600controller, ATIX2000, and EVOenabler kexts, need to edit these with device ID! )
 
| yes ( used legacy_kernel )
 
| yes
 
|-
 
M2N-X
 
|M2N-MX
 
|nForce 430
 
|
 
Used [Intel/AMD] Snow Leopard 10.6.1-10.6.2 SSE2-SSE3 Intel/AMD by Hazard
 
* Installation method: from IDE DVD Drive to IDE HDD
 
* Installation options: AMD_patch, legacy_kernel, nvinject, appleazaliaaudio, X11
 
* CPU: AMD Athlon64 3800+
 
* SATA: Works after installation (did not try to install to SATA drive)
 
* IDE: Works
 
* LAN: Works (build in nForce 430)
 
* Audio: Needs AppleAzalia kext. It doesn't identify input device. Cannot change volume with keyboard, only from system prefs. (iTunes crashes when try to play files. Probably crash without QE/CI support. Can play media with Quicktime or Cog)
 
* USB: Works (disable Legacy in bios)
 
* Video: (build in GPU without QE/CI support) Geforce 6150, cannot change the resolution after boot (use "Graphics Mode"="1280x1024x32" in bootloader change to the resolution). Can use the PCI express slot and try another video card.
 
| yes ( used legacy_kernel )
 
| no (onboard GPU has no QE/CI support)
 
|-
 
|Asus M4A79XTD EVO
 
|SB750
 
|
 
Used [Intel/AMD] Snow Leopard 10.6.1-10.6.2 SSE2-SSE3 Intel/AMD by Hazard
 
 
* Installation method: from SATA DVD Drive to SATA HDD
 
* CPU: AMD Phenom II X4 955 BE
 
* SATA: Works (AHCI)
 
* LAN: works with RL8169
 
* Audio: AppleAzalia kext. Cannot change volume with keyboard, only from system prefs.
 
* USB: Works
 
* Video: Nvidia 9800GT works perfectly with Graphics Enabler. Tried ATi 4670 and couldnt EVER get it to work )
 
* I think either External USB harddrives or uTorrent usage for prolonged periods causes Kernel Panic.
 
| yes ( used ANV Kernel )
 
| yes
 
|-
 
|M4N78-AM
 
|NVIDIA GeForce 8200
 
|
 
Used [Intel/AMD] Snow Leopard 10.6.1-10.6.2 SSE2-SSE3 Intel/AMD by Hazard
 
 
* Installation method: from USB key to SATA HDD (booted with [http://www.insanelymac.com/forum/index.php?showtopic=184338|Chameleon cdboot (boot132) for 10.6])
 
* Installation options: Combo Update 10.6.2, Legacy Kernel 10.2, Elliott Force Legacy RTC, AMD Patch
 
* CPU: AMD Athlon64 x2 5200+ AM2 Tray "Brisbane" (X2 5200 = 2,7 GHz, cache L1=2x128kB, cache L2=2x512kB, 65W)
 
* SATA: Works
 
* IDE: Doesn't work
 
* LAN: Partially works (creates new NVEthernet interface each boot time)
 
* Audio: VIA VT 1708S works out of the box
 
* USB: Works
 
* Video: NVIDIA GeForce 8200 ( no QE/CI, set to 32MB shared in bios, boot with "Graphics Mode"="[email protected]" to set resolution )
 
* Sleep, Wake, Shutdown, Reboot is not working
 
| yes ( used legacy_kernel )
 
| yes
 
|-
 
|A8N-SLI Premium
 
|Nforce4
 
|AMD Opteron 165  939
 
*This installation is full 64 bits except for the KERNEL by now.
 
*
 
*• Boot from a good Leo/Snow pc.
 
*• attach a drive (sata, ata, usb.. as you like)
 
*• do a Chameleon 2 RC4 setup on the above storage
 
*• perform a Snow Leopard Client-Server 10.6.2 SSE2/SSE3 Intel AMD setup, mounting the iso, with the doubleclick in the OSINSTALL.Mpkg
 
*• Choose these AD HOC custom installs:
 
*DO NOT INSTALL Snow Leopard Server 10.6.2 (didn't tested it)
 
*Kernel: Legacy_kernel_10.2.0
 
*Graphics: your choice ( I got NVenabler for my 7600GS 256)
 
*Chipset: ANV64bit nforceata avoid Supernforceata.
 
*Audio: ALC850-AC97 Sound works in 64 bits
 
*Network: Skge
 
*Patches:
 
*SATA_ATA_Fix: IOATAFamily_SATA_Fix
 
*Fakesmc (now using this new version http://www.projectosx.com/forum/inde...showtopic=1206)
 
*IOATAFamily_Fix
 
*SMBIOSResolver
 
*UUID
 
*SLEEPENABLER (Select your Version)
 
*EVOREBOOT
 
*Dont use* Cmos Reset: ElliottForceLegacyRTC
 
*DONT USE nForceLAN, gives problems with SLEEP"
 
*BIOS SETTINGS key to get good performance and avoid the spinning pizza wheel.
 
*Peg Link mode: disabled
 
*Peg Root Control:disabled
 
*Peg Buffer Length: Auto.
 
ALTERNATE INSTALL for 10.5.1: http://wiki.osx86project.org/wiki/index.php/Installation_Guides/Kalway_AMD_10_5_2
 
|Chameleon 2 RC4 + Legacy Kernel 10.2
 
|no
 
|-
 
|A8N-E
 
|Nforce4
 
|AMD 3000+ 939
 
*Installed from Hazard's Snow Leopard Distro 10.6.1 - 10.6.2
 
*selected package: Legacy 10.2.0, 10.6.2, AMD
 
*Network working: select no network when you create an account after installing. Restarting again will see the network working.
 
*ShutDown, Restart Working
 
*Sound work by using the kext from [http://www.sendspace.com/file/v5dz95]
 
*VGA: asus x300, 1280x1024x32 only.
 
|not tested
 
|no
 
|}
 
 
=== Biostar ===
 
'''AMD CPU'''
 
{| class="wikitable" width="100%"
 
!Hardware Name
 
!Chipset
 
!Notes
 
!EFI/kernel working
 
!Fully Working w/o Patch
 
|-
 
|TF7050-M2
 
|GF7050 PV / NF630 (MCP68PV)
 
|
 
*AMD X2 4200, 2Gb DDR2 RAM @ 800Mhz
 
*VGA : onboard Geforce 7050
 
*DVD-RW on SATA
 
*LAN : RTL8168B/8111
 
*Audio: 7.1-CH HD ALC888 CODEC
 
 
----
 
 
Install Using:
 
*[Intel/AMD] Snow Leopard update combo 10.6.1 + 10.6.2 SSE2-SSE3 Intel/AMD by Hazard
 
*Boot loader: Chameleon
 
*Graphics : working with GraphicsEnabler, but generic quality.
 
*SATA ATA fix : LegacyAppleIntelPIIxATA
 
*CMOS reset fix : ElliotForceLegacy RTC
 
*Audio: working with voodoohda.kext
 
*LAN:  working with RTL8169.kext
 
*Optical Drive: working with SATA optical drive in AHCI mode
 
*Shutdown/Restart: Fully working
 
*Sleep: not working, using sleepenabler.kext
 
*Other kexts: SMBios Resolver, Apple Upstream User Client disabler, AMD patch
 
*Apple Softwareupdate: not yet test so far
 
*Can't write NTFS format, resolution : change AppleNForceATA.kext with IPC OSX 10.5.6 PPF5 [http://pcwizcomputer.com/ipcosx86/?page_id=96] for MCP67
 
----
 
 
BIOS setting:
 
*SATA AHCI enabled
 
*HPET enable
 
*Disable bit enable
 
|legacy-kernel 10.2 - xnu
 
|yes
 
|-
 
|}
 
'''Intel CPU'''
 
{| class="wikitable" width="100%"
 
!Hardware Name
 
!Chipset
 
!Notes
 
!EFI/kernel working
 
!Fully Working w/o Patch
 
|-
 
|P4M80-M4
 
|GF6800 / VIA P4M800 / VT8237
 
|
 
*Pentium 4 3GHz, 512 DDR RAM @ 400Mhz
 
*VGA : Geforce 6800
 
*DVD-RW
 
*LAN : onboard VIA VT6103
 
*Audio: AC'97 2.2 6-ch audio CODEC (ALC655)
 
 
----
 
 
Install Using:
 
*Snow Leopard Client/Server 10.6.2 SSE2/SSE3 Intel/AMD by Hazard
 
*Graphics : [http://www.kexts.com/view/418-nvenabler_-_nvinject_-_natit__for_10.6.4.html NVInjector] (?)
 
*CMOS reset fix : ElliotForceLegacy RTC
 
*Audio: working with [http://www.google.ru/search?sourceid=chrome&ie=UTF-8&q=AppleAC97Audio_VIA_Stereo_Fixed.zip AppleAC97Audio_VIA_Stereo_Fixed.zip]
 
*Chipset: VIAATA
 
*LAN:  working with [http://www.kexts.com/view/240-via_rhine_iii.html ViaRhine.kext]
 
*Optical Drive: Fully working
 
*Shutdown/Restart: Fully working
 
*Sleep: not working
 
Boot loader options:
 
* Chameleon_RC4
 
* Bootx86
 
* ForceHPET
 
* Graphic_Enabler
 
|
 
Legacy_kernel_10.2.0
 
|
 
* [http://www.osx86.es/?p=749 EvOReboot]
 
* PS2
 
* SMBIOSResolver
 
* Upstream_Client_Disabler
 
* USB_Fix
 
** IOPCIFamily_Fix
 
** IOUSBFamily_Fix
 
|}
 
 
=== ECS ===
 
{| class="wikitable" width="100%"
 
!Hardware Name
 
!Chipset
 
!Notes
 
!EFI/kernel working
 
!Fully Working w/o Patch
 
|-
 
|KN3 SLI2 Extreme Series
 
|NVIDIA nForce 590 SLI
 
NB:C51XE
 
SB:MCP55XE
 
|
 
* Athlon X2 5600+
 
* Digital Aliance GeForce 7300GT 256MB
 
* Corrsair TwinX 2Giga DDR2 6400
 
* Installed 10.6.2 Leo Hazard
 
----
 
Select this patch :
 
* Legacy_Kernel_10.2.0
 
* NVInject
 
* Legacy AppleRTC
 
* UUID
 
* AMD
 
* Rosetta
 
----
 
Problem :
 
* Sleep & Shutdown not work
 
* Graphic Display 1024 x 768 32bit
 
* all Hardware is dettect
 
| Chameleon 2.0 RC3,
 
Legacy_Kernel_10.2.0 34bit
 
| No
 
|}
 
 
=== EVGA ===
 
{| class="wikitable" width="100%"
 
!Hardware Name
 
!Chipset
 
!Notes
 
!EFI/kernel working
 
!Fully Working w/o Patch
 
|-
 
|132-BL-E758
 
X58 3-Way SLI
 
|Intel X58 and ICH10R
 
|
 
* Intel Core i7 920 @ 2.66Ghz, 6GB RAM @ 1600Mhz
 
* Installed 10.6.0 retail via MacBook to external drive then upgraded to 10.6.2
 
* BIOS Version: 49 - 03.10.2010
 
----
 
* Bootloader : Chameleon 2.0 RC3
 
* Kernel : Vanilla 64bit
 
* Graphics : Using EFI String, Single and Dual GTX260
 
* Audio : voodooHDA 0.2.2 with prePane to get correct volume
 
* Additional Kexts (in /Extra/) :
 
** AHCIPortInjector.kext
 
** fakesmc.kext
 
** IOAHCIBlockStorageInjector.kext
 
** JMicronATA.kext
 
** LegacyHDA.kext
 
** NullCPUPowerManagement.kext
 
** OpenHaltRestart.kext
 
** PlotformUUID.kext
 
** RealtekR1000SL.kext
 
* Additional Kexts (in /System/Library/Extensions/):
 
** voodooHDA.kext
 
** renamed AppleHDA.kext to AppleHDA.kext.bak
 
----
 
* SATA, USB, Audio, Lan - Works
 
* JMicron controllers work great
 
** Possible issue accessing NTFS drives on JMicron ports freezing access to ICH10R drives, seemed to go away when all connected to ICH10R. Use Black (intel) ports over red ones if possible. CD Drive on JMicron seems to work without issues.
 
* ICH10R RAID does not work, have not tested any workaround -- use AHCI settings
 
* Video works 100%, full QE/CI, using EFI strings only. Tested with single and dual GTX260, both work
 
* Shutdown & reboot works fine
 
* Have not tested sleep, reports are it works with 10.6.2 SleepEnabler
 
* Ethernet sometimes does not load (~15% of time) on boot, must rerun kext tool and reboot, then works again.
 
| Chameleon 2.0 RC3,
 
Vanilla Kernel 64bit
 
| Yes
 
|}
 
 
=== Foxconn ===
 
{| class="wikitable" width="100%"
 
!Hardware Name
 
!Chipset
 
!Notes
 
!EFI/kernel working
 
!Fully Working w/o Patch
 
|-
 
|BloodRage
 
|Intel x58/Intel ICH10R
 
|
 
*Install method: Empire EFI v.1.085 rc2 + Retail 10.6 DVD + Apple Software upate to 10.6.2
 
*Boot loader: Myhack v1.0, Chameleon RC3
 
*Bios Version: P09
 
*Audio: ALC889 Output working with voodoohda.kext
 
*LAN: both Ports working
 
*Optical Drive: working, any SATA optical drive in AHCI mode
 
*Shutdown/Restart: Fully working
 
*Sleep: working, using sleepenabler.kext in 32bit
 
*Other kexts: none needed
 
*Apple Softwareupdate: All updates working so far
 
*Guide: [http://prasys.co.cc/tag/empire-efi/]
 
|Yes, Vanilla kernel
 
|No, voodoohda.kext required for audio(alc889), sleepenabler.kext. Note: AHCI MUST be enabled in the bios, HPET to 64bit
 
|-
 
|G31MXP-K
 
|Intel G31/Intel ICH7
 
|
 
*Install method: myHack RC4 + Retail 10.6 DVD + Apple Software Update to 10.6.2
 
*Bootloader: myHack, Chameleon RC3
 
*Audio: ALC662 Output and Input working with kext and DSDT from Gigabyte G31-E2SL
 
*LAN: Realtek 8168B Used LegacyAppleRTC kext from myHack installer and Bonjour enabler for Bonjour
 
*Optical Drive: Working BenQ on ATA
 
*HD: Working WD2500 on SATA
 
*Graphics: Integrated Intel works but gives no res change or QE/CI, using a 7600GT in PCI-e slot and 8400GS in PCI slot with GraphicsEnabler EFI sting
 
*Shutdown/Restart: Fully working
 
*Sleep: Untested, assumed working with SleepEnabler kext
 
*Other kexts: FakeSMC for CPU temp reading in iStat Menus
 
*Apple Software Update: All updates working so far
 
*Guide: [http://prasys.co.cc/tag/empire-efi/]
 
|Yes, Vanilla kernel
 
|No, kexts needed for LAN/Audio
 
|-
 
|G9657MA-8KS2H
 
|Intel 965/ICH8
 
|Used only 5 kexts
 
*Chipset (ICH8) works! - IOATAFamily, all SATA ports works!
 
*Audio (ALC883) works! - orig AppleHDA from 10.6.2 + my DSDT / Legacy kext.
 
*Video (GMA) not tested. (9600tg) works! - GraphicEpabler via Chameleon.
 
*Lan (Marvell 88E8056) works! - used Legacy
 
*+Fakesmc and EvOreboot
 
atm I'm Running 10.6.4 + Chameleon 2.0 RC4
 
[http://2befine.110mb.com/foxconn_g965.zip Download Chameleon 2.0 RC5 + DSDT + Extra + keksts]
 
|Yes, 32/64bits Vanilla kernel
 
|Fully works except wakeup after sleep. [http://2befine.110mb.com/foxconn_g965.zip 5 keksts + DSDT]
 
|-
 
|45CM / Intel 945GM
 
|Intel 945GM
 
|
 
*Install method: Hazard 10.6.2 Install DVD.
 
*Boot loader: Chameleon RC3
 
*Audio: HDAEnabler and AppleLegacy
 
*LAN: No driver selected during install. after install follow these instructions:
 
[ OSX86 : (Drivers > Lan & Wireless) ]
 
 
Replace the AppleRTL8139Ethernet.kext from the Original IONetworkingFamily.kext with the AppleRTL8139Ethernet.kext from the OSX86 site.
 
 
Location : /S/L/E/IONetworkingFamily.kext/
 
Contents/Plugins/AppleRTL8139Ethernet.kext
 
 
And then
 
Put your modified IONetworkingFamily.kext into /S/L/E.
 
Run "Kext Utility".
 
Reboot.
 
 
*Optical Working out of box no changes made to BIOS
 
*Shutdown/Restart: Fully working
 
*Sleep: Not waking up. Haven't tried sleepanble.kext
 
*Other kexts: LAN and Audio
 
*Apple Softwareupdate: All updates working so far
 
*Guide:
 
|Yes, Vanilla kernel
 
|
 
|}
 
 
=== Gigabyte ===
 
{| class="wikitable" width="100%"
 
!Hardware Name
 
!Form Factor
 
!Chipset
 
!Notes
 
!EFI/kernel working
 
!Fully Working w/o Patch
 
|-
 
|GA-P43-ES3G  Rev 2.0
 
|ATX
 
|Intel P43/ICH10
 
|
 
Installed using [http://lifehacker.com/5351485/how-to-build-a-hackintosh-with-snow-leopard-start-to-finish#bootloader_guide].
 
* Audio - Used AppleHDA.kext and HDAEnabler.kext from here [http://www.tonymacx86.com/Public/HDEF%20Pack%20-%20ALC%20888.zip].
 
* Ethernet LAN - Works without patching
 
* SATA - Works without patching
 
* DVD Rom - works without patching
 
* Graphics - Works without patching - Asus 8400GS Silent 512MB DDR2 DVI VGA Out PCI-E Graphics Card
 
* System Components: Pentium Dual-Core E5300 2.6Ghz (overclocked to 3.3Ghz), 4GB RAM. (2x1GB in Dual Channel, 1x2GB)
 
* Note: If upgrading to 10.6.3, remove sleepenabler.kext. If you don't, it will Kernel panic when restarting after software update.
 
|Yes
 
|No, used fakesmc.kext. AppleHDA.kext and HDAEnabler.kext for audio. Sleep works (You must check the "restart after power failure" in the energy saving preference.
 
 
|-
 
 
|GA-MA78GM-UD2H (Rev 1.0)
 
|microATX
 
|AMD 780G + SB700 Chipset
 
|
 
*CPU AMD Athlon 64 x2 5200+ 2,7GHz
 
*Installed using modbin kernel: "mach_kernel.test7" with golden master distro 10A432 and updated to 10.6.2 with update .dmg from Apple website. Do not boot when 10.6.2 update setup is ready --> copy your kernel BEFORE update and place it to your SL root again after the update.
 
*You need external kexts: DSMOS.kext, FakeSMC.kext, PlatformUUID.kext, Openhaltrestart.kext, NullCPUPowerManagement.kext
 
*Using Chameleon RC4 bootloader
 
*SL resets your bios setup every time you restart your PC, so you need to do CMOS reset fix to DSDT -file. Instructions: [http://osx86.co/f84/snow-leopard-cmos-reset-fix-t3478/]
 
*Tutorial for installing: [http://www.ihackintosh.com/2009/09/install-snow-leopard-106-on-amd-pc-hackintosh]
 
 
Working out of the box:
 
------------------
 
*SATA, USB, FireWire, LAN
 
 
Not tested:
 
--------
 
*Sleep
 
*Graphics, I did not test, because got external videocard.
 
|
 
|
 
|-
 
 
|GA-X58A-UD3R (Rev 1.0)
 
|ATX
 
|Intel X58 /  ICH10R
 
|
 
* CPU Intel Core I7 930 2.80G R
 
* Installed using Vanilla Kernel w/Empire EFI, then patched the bootloader with Kakewalk.
 
----
 
* Graphic => EVGA GeForce 9800 GT 1GB works w/dual monitors out of the box - new egg: [http://www.newegg.com/Product/Product.aspx?Item=N82E16814130391&nm_mc=TEMC-RMA-Approvel&cm_mmc=TEMC-RMA-Approvel-_-Content-_-text-_-]
 
* Lan => Works out of the box
 
* SATA, USB - Works
 
 
| Yes. Vanilla kernel.
 
| No. Audio needs patching, but on the goodside I was able to upgrade to the latest verion of Mac OS X (10.6.3) through the regular software update w/out any problems. Audio needs repatching, but that's it. Voodoohda.kext works well. Dual monitors still work.
 
 
|-
 
 
|GA-P41-ES3G
 
|ATX
 
|Intel G41/ICH7
 
|
 
* Intel Pentium Core 2 Duo E8400 3.0 GHZ, 2GB RAM 800MHZ
 
* Installed using Snow Leopard 10.6.1 - 10.6.2 By Hazard
 
----
 
* Options marked on Installer :
 
* Mac_OS_X 10.6.2 Combo
 
* Chameleon_RC3_PCEFI_10.5
 
* NVenabler
 
* AppleHDA
 
* ElliottForceLegacyRTC
 
* Legacy_AHCI_SATA_Fix
 
* IOATAFamily_SATA_Fix
 
* SMBIOSResolver
 
* FakeSMC_v1.0
 
* X11
 
* Rosetta
 
----
 
* Azalia Codec Disabled on BIOS coz im using external audiocard
 
* Using Gigabyte NVidia 9500GT 1GB DDR3 Ram
 
* Sound card using M-Audio Fast Track Pro
 
* IDE and SATA works like a charm
 
* USB mouse and PS/2 Keyboard works OOB
 
| Yes
 
|
 
|-
 
|GA-P31-ES3G
 
|ATX
 
|Intel P31/ICH7
 
|
 
* Intel Pentium Dual-Core E5300 2.6GHz 2GB RAM 800MHz
 
* Installed using SnowOSX Universal v3.6
 
----
 
* Options marked on installer:
 
* Bootloader => PC EFI 10.5 - Chameleon 2 RC3
 
* Kernel => Legacy 10.3.0
 
* System Support => NullCPUPM, PlatformUUID, FakeSMC, IOATA Kernel Panic fix - 32/64-bit IOATAFamily, EvOreboot, SMBIOSResolver, Legacy AHCI, Legacy ATA, PS/2, Rosetta
 
----
 
* Graphic =>NVidia GeForce GT 220 - [http://www.projectosx.com/forum/index.php?s=bc1676f79de140bda2351ea7c977c5e2&act=attach&type=post&id=632 NVEnabler 64.kext]
 
* Audio => Realtec ALC888 - [http://www.insanelymac.com/forum/index.php?s=a391161d03893c992e8bd1ad84fea9d1&act=attach&type=post&id=57476 ALC888 x64]
 
* Lan => Realtek 8111C - Built-in
 
* SATA, IDE, USB - Works
 
* Shutdown & reboot ok, sleep not work
 
| Chameleon RC3, Legacy_Kernel 10.3.0 64-bit
 
| Yes
 
|-
 
|GA-G41M-ES2L rev 1.1
 
|mATX
 
|Intel G41/ICH7
 
|
 
*Install method: Snow Leopard 10.6.1-10.6.2 SSE2 SSE3 Intel AMD by Hazard. Chameleon RC3 PCEFI 10.5, NVEnabler, Realtek R1000 LAN, VoodooHDA audio, CMOS Checksum fix
 
 
Hardware:
 
*Intel Celeron E3300 2.5GHz
 
*2GB (x 1) DDR2
 
*40GB IDE Hard Drive
 
*SATA DVDRW
 
*MSI NVIDIA GeForce 9500GT 512MB DDR2
 
*Realtek RTL8111C/D(L) LAN
 
*Realtek ALC888B HD integrated audio
 
*BIOS version: F6
 
Installation:
 
*Bootloader: Chameleon RC3 PCEFI 10.5
 
*SATA & IDE: Working OOB
 
*Audio: VoodooHDA working, did not test OOB
 
*LAN: Working with Realtek R1000 kext, can be downloaded from psystar
 
*USB 2.0 working OOB
 
*Standby working OOB. Shutdown and restart worked OOB.
 
|Vanilla kernel working
 
|Yes
 
|-
 
|GA-G41M-ES2L
 
|mATX
 
|Intel G41/ICH7
 
|
 
*Install method: Snow Leopard 10.6.1-10.6.2 SSE2 SSE3 Intel AMD by Hazard. Need cpus=1 boot flag or installer fails with kernel panic. Chose only Mac_OS_X_10.6.1, Mac_OS_X_10.6.2, Chameleon RC3 PCEFI 10.5, NVEnabler and Rosetta options. Got "boot0: GPT; boot0: testing; boot0: testing; boot0: error" message if no bootloader was chosen. After installation, had to boot into single-user mode and rm -rf /system/library/extensions/appletymcedriver.kext, was causing kernel panic. Did not need cpus=1 boot flag when booting into OS X.
 
 
1. Had to patch dsdt.aml using DSDTSE to fix "CMOS Checksum Error" when computer was restarted; followed these instructions    step-by-step: [http://tonymacx86.blogspot.com/2009/11/create-and-modify-your-dsdtaml.html]
 
 
2. There's also an available DSDT patcher inside the System. Run this and Select the OS's that causes the CMOS checksum error. Select everything in the right column.
 
 
 
Hardware:
 
*Intel Celeron E3200 2.4GHz @ 3.6GHz
 
*2x1GB Patriot Extreme Performance LL PC2-6400 @ 800MHz, 4-4-4-12, 2.1v
 
*Seagate 250GB 7200RPM SATA-II HDD (XP SP3)
 
*Maxtor 40GB 5400RPM IDE HDD (OS X)
 
*Sony DVD-ROM/CD-RW SATA drive
 
*EVGA NVIDIA GeForce GTX 260 SC Core 216 896MB
 
*Realtek RTL8111C/D(L) LAN
 
*Realtek ALC888B HD integrated audio
 
*BIOS version: F6
 
Installation:
 
*Bootloader: Chameleon RC3 PCEFI 10.5
 
*SATA & IDE: Working OOB
 
*Audio: VoodooHDA working, did not test OOB
 
*LAN: Working OOB
 
*USB 2.0 working OOB
 
*Standby working OOB. Shutdown and restart worked OOB but cleared CMOS until I patched DSDT.
 
|Vanilla kernel working
 
|Yes
 
|-
 
 
|GA-8I945GZME-RH
 
|mATX
 
|Intel 945GZ Express chipset, Intel GMA950 graphics, Intel ICH7
 
|
 
*Install method: SnowOSX 10.6 v3.6A DVD (built on Retail Snow Leopard 10.6 + Update 10.6.2 + Safari 4.04)
 
*Boot loader: Chameleon 2 RC3 (r658), PC EFI 10.5
 
*BIOS version: F6
 
*Audio: Realtek ALC883 - needs VoodooHDA.kext added post-install (found in /Applications/ATools/_Drivers on your HDD after SnowOSX is installed)
 
*LAN: Marvell 8001 Gigabit Ethernet, needs skge_0.2f_x6_i386 kext by RonnieD available from [http://www.insanelymac.com/forum/index.php?showtopic=15700&st=420#]
 
 
Can't Access Internet: you may find the LAN works but you can't access outside addresses (eg. browser can't find pages); this is a DNS issue - if you can ping 8.8.8.8 but can't ping google.com (or use your browser to go anywhere outside the local network), then it's DNS related. SOLUTION: upon startup (or whenever this occurs) go to console and type 'sudo killall mDNSResponder', then enter your password. This causes the DNS client service to restart. Within a couple of seconds, DNS should be working and all will be well, you'll be able to surf the net :)
 
 
*Optical Drive: working, my Lite-On iHAS-120 DVD burner works fine
 
*Shutdown/restart: works fine
 
*Sleep: haven't tested, presumed working
 
*Other kexts: you will need skge 0.2f from [http://www.insanelymac.com/forum/index.php?showtopic=15700&st=420#] and VoodooHDA, which is included with the SnowOSX 3.6A install, or you can get it from the net
 
*Apple Software Update: All working so far with 10.6.4 (2010-june-24)
 
*Guide: Install SnowOSX 3.6A, install skge 0.2f kext, install VoodooHDA kext, update to 10.6.4 :)
 
 
Hardware in my system:
 
* Intel Core2 Duo 6400 2.13GHz
 
* Seagate Barracuda 7200.12 HDD, 500GB, 16MB cache
 
* Lite-On iHAS-120 DVD Burner
 
* 4GB (2x2GB) Kingston DDR2 800MHz RAM
 
|Sound and LAN need extra kexts to work (see aforementioned); otherwise all working with SnowOSX 3.6A install (ie. vanilla 10.6.2)
 
 
When booting, the system will complain of a CMOS checksum error - pressing F1 solves this. I know there are solutions to this but I haven't yet tested any.
 
|No, but can be easily made to work 100% by adding extra kexts
 
|-
 
|GA-EX58-UD5
 
|ATX
 
|Intel X58, Intel ICH10R
 
|
 
*Install method: X58 Mobo Patch Installer + Retail 10.6 DVD + Apple Softwareupdate to 10.6.2
 
*Second Mac / Hackintosh / Harddrive with OSX already installed required
 
*Boot loader: Chameleon RC4
 
*BIOS version: F9E
 
*Audio: working
 
*LAN: both Ports working
 
*Optical Drive: working, any SATA optical drive (64/32-bit).
 
*Shutdown/restart: Working without any problems
 
*Sleep: working, using sleepenabler.kext for 10.6.2 (after updating via softwareupdate)
 
*Other kexts: everything necessary automatically installed by script, so it's quite simple
 
*Apple Softwareupdate: All updates working without any problems so far (13.01.2010)
 
*Guide: [http://www.insanelymac.com/forum/index.php?showtopic=149505]
 
|Yes, vanilla.
 
|No, but almost everything required is automatically installed by script
 
|-
 
 
|GA-EX58-UD5
 
|ATX
 
|Intel X58, Intel ICH10R
 
|
 
*Install method: Modded DSDT plus X58 Mobo Patch Installer + Retail 10.6 DVD + Apple Softwareupdate to 10.6.3 (64/32-bit)
 
*Empie Efi BootCD or Second Mac / Hackintosh / Harddrive with OS X already installed
 
*Boot loader: Asere BLN 1.9 Based on Chameleon 2 RC4 or PC Efi 10.6 from Prasys' blog
 
*BIOS version: F12
 
*Native power management using vanilla kexts
 
*Audio: Working with vanilla kexts (no sound kexts installed)
 
*LAN: Both Ports working with RealtekR1000 in S/L/E
 
*Optical Drive: SATA optical drive, works OOB.
 
*Shutdown/restart: Working (no kexts needed)
 
*Sleep: Working (no kexts needed)
 
*Other kexts: Requires only FakeSMC in /Extra inorder to boot.
 
*Apple Softwareupdate: All updates work (14.04.2010)
 
*Guide: [http://www.insanelymac.com/forum/index.php?showtopic=185097&st=2080&p=1416253&#entry1416253]
 
*Snow Leopard can also be installed using only a BootCD, mkext tool and kexthelper to install kexts needed.
 
|Yes, vanilla.
 
|No Realtek kext is need in S/L/E inorder to enable ethernet and fakeSMC in /Extra is required to boot.
 
 
|-
 
 
|GA-H55N-USB3 (Rev 1.0)
 
|Mini ITX
 
|Intel H55 Express Chipset
 
|
 
* CPU Intel Core i5 655K
 
* Installed using Vanilla Kernel w/Multibeast for Graphics/Audio/LAN drivers ("http://www.tonymacx86.com/Public/MultiBeast.zip") (had to copy the CD bootloader from iBoot to get it to boot after installation) ("http://www.tonymacx86.com/Public/iBoot-Supported.zip").
 
* Graphic => GIGABYTE GV-N84S-512I GeForce 8400 GS - works with NVEnabler driver.
 
* Lan => Works with Realtek R1000SL driver.
 
* SATA, USB - Works.
 
 
| Yes. Vanilla
 
| No. Audio works with ALC888 LegacyHDA driver only.
 
 
|-
 
 
|GA-P55-UD4P
 
|ATX
 
|Intel P55
 
|
 
*Install method: Legacyboot cd ud4p + Mac OS 10.6.0 + 10.6.2 combo update.
 
*Boot loader: Gigabyte boot
 
*EFI environment: PC EFI 10.5.
 
*BIOS version: F2.
 
*PCB revision: 1.0.
 
*Audio: Realtek ALC889a codec, working (64/32-bit).
 
*LAN: Realtek 8111D, working at only 100mbit speeds with driver in /System/Library/Extensions: Realtek R1000 (64/32-bit).
 
*SATA 3 gb/s: ICH10R, working with SATA ports set to AHCI (64/32-bit). Gigabyte ports (8, 9) require JMicronATA.kext (64/32-bit).
 
*SATA 6 gb/s: not working.
 
*IDE: not working.
 
*USB 3.0: not working.
 
*Optical Drive: working, any SATA optical drive (64/32-bit).
 
*Shutdown/restart: working, with OpenHalRestart.kext (64/32-bit).
 
*Sleep: working, requires DSDT patch (64/32-bit).
 
*Other kexts: fakesmc.kext, PlatformUUID.kext (64/32-bit).
 
|
 
|
 
|-
 
|P55-US3L
 
|ATX
 
|Intel P55
 
|
 
*Install method: USB method + Mac OS 10.6.0 + 10.6.2 combo update. see [http://tonymacx86.blogspot.com/2009/11/os-x-snow-leopard-install-using-retail.html this tonymacx86 blog]
 
*Boot loader: PC EFI 10.5
 
*EFI environment: Chameleon 2 RC4.
 
*BIOS version: F4a BETA.
 
*PCB revision: 1.0.
 
*Audio: Realtek ALC888 codec, working with DSDT and LegacyHDA.
 
*LAN: RTL8111D working  with Realtek R1000 kext
 
*SATA 3 gb/s: ICH10R, working with SATA ports set to AHCI (64/32-bit). Gigabyte ports (8, 9) require JMicronATA.kext (64/32-bit).
 
*IDE: n/a.
 
*Optical Drive: working, any SATA optical drive
 
*Shutdown/restart: working with DSDT
 
*Sleep: working, requires DSDT patch
 
*Other kexts: fakesmc.kext
 
|Yes, vanilla.
 
|No, kexts and DSDT patches required for shutdown/restart, sleep, audio, lan.
 
|-
 
|GA-G33M-DS2R
 
|mATX
 
|Intel G33
 
|
 
* Install method: Activate AHCI, use Rebel EFI cd bootloader and vanilla Mac OS 10.6.0 DVD, apply vanilla 10.6.2 software update
 
* Boot loader: Chameleon 2.0-RC4
 
* EFI environment: PC EFI 10.5
 
* BIOS version: F9A (reduce AHCI initialization time)
 
* Audio: Realtek ALC889a codec, works with DSDT patch and LegacyHDA.kext and HDAEnabler.kext in /Extra folder, see [http://www.insanelymac.com/forum/index.php?showtopic=140941 889a thread]
 
* LAN: Works out of the box
 
* SATA : Works out of the box in AHCI
 
* IDE: Unknow
 
* USB 2.0: Works out of the box
 
* Onboard graphic controller: Works without acceleration, ATI or NVIDIA need DSDT patch.
 
* Optical Drive: SATA optical drive Works out of the box
 
* Shutdown/restart: Works with OpenHalRestart.kext
 
* Sleep: not working
 
* [http://www.insanelymac.com/forum/index.php?showtopic=71338&st=180&p=1367681&#entry1367681 DS2R 10.6.2 install guide].
 
|Yes, vanilla.
 
|No, kexts and DSDT patches required for shutdown/restart, sleep, audio.
 
|-
 
 
|GA-EX58A-UD5
 
|ATX
 
|Intel X58
 
|
 
*Install method: Empire EFI Boot CD + Retail 10.6 DVD + Apple Softwareupdate to 10.6.3 (64/32-bit) + Modded DSDT + custom kexts
 
*DSDT patch guide : [http://www.insanelymac.com/forum/index.php?showtopic=196771]
 
*Instaled kexts with kexthelper B7
 
*Will not install with more than 4GB of Memory. More memory can be added after installation.
 
*Native power management : using NullCPUPowerManagement.kext. Could work without after DSDT patch, not tried yet.
 
*Audio: ALC889 chip needed DSDT patch and kext : LegacyHDA, HDAEnabler in /Extensions and AppleHDA in S/L/E
 
*LAN: Both Ports working with RealtekR1000SL in S/L/E
 
*Shutdown/restart: OpenHaltRestart.kext. Not sure if its needed.
 
*Sleep: SleepEnabler in /Extensions. Could work without it after DSDT patch, but I have not tried it yet.
 
*Apple Softwareupdate: All updates work (25.04.2010)
 
|Yes, vanilla.
 
|No.
 
|-
 
 
|GA-X58A-UD7
 
|ATX
 
|Intel X58 Express
 
|
 
* Install method: Vanilla Mac OS 10.6.0 + 10.6.2 combo update.
 
* Boot loader: Chameleon 2.0-RC3.
 
* EFI environment: PC EFI 10.5.
 
* BIOS version: F2.
 
* PCB revision: 1.0
 
* Audio: Realtek ALC889 codec, working (64/32-bit)
 
* LAN: Realtek 8111D, working at 1 Gbit speeds with driver in /System/Library/Extensions: Realtek R1000 (64/32-bit)
 
* SATA 3 gb/s: ICH10R, working with SATA ports set to AHCI (64/32-bit). Gigabyte ports (8, 9) working; requires JMicronATA.kext (64/32-bit)
 
* SATA 6 gb/s: not working
 
* IDE: not working
 
* USB 3.0: not working
 
* Optical Drive: working, any SATA optical drive (64/32-bit)
 
* Shutdown/restart: working, with OpenHalRestart.kext (64/32-bit)
 
* Sleep: working, requires DSDT patch (64/32-bit)
 
* Other kexts: fakesmc.kext, PlatformUUID.kext (64/32-bit)
 
kexts and DSDT patches required for shutdown/restart, sleep, audio. Guide [http://www.efixusers.com/showthread.php?t=605]
 
|Yes, vanilla
 
|No
 
 
|-
 
|GA-P55-UD4
 
|ATX
 
|Intel P55 Express
 
|
 
* Install method: Vanilla Mac OS 10.6.0 + 10.6.2 combo update.
 
* Boot loader: Chameleon 2.0-RC3.
 
* EFI environment: PC EFI 10.5 with patch for Core i5/i7.
 
* BIOS version: F4.
 
* PCB revision: 1.0.
 
* Audio: Realtek ALC888 codec, not yet working.
 
* LAN: Realtek 8111D, OK with driver in /System/Library/Extensions: Realtek R1000 (64-bit).
 
* SATA: OK Out-Of-the-Box(OOB), with SATA ports set to AHCI. Gigabyte ports require JMicronATA.kext.
 
* IDE: Not tested.
 
* Optical Drive: OK (OOB). Samsung SH-S223B.
 
* Shutdown/restart: OK, with EvOReboot.kext.
 
* Sleep: OK, requires DSDT patch.
 
* Other kexts: fakesmc.kext, PlatformUUID.kext.
 
|Yes, vanilla.
 
|No, kexts and DSDT patches required for shutdown/restart, sleep, LAN and audio.
 
|-
 
|GA-P55M-UD4
 
|mATX
 
|Intel P55
 
|
 
*Vanilla Install from Retail DVD Using [http://tonymacx86.blogspot.com tonymac's guide] and tonymac's iBoot with Multibeast, running in 64-bit mode, updated 10.6.2
 
*Bootloader Chameleon 2.0 RC4 + EFI 10.5
 
*Bios: F8
 
*CPU: Core i5-750
 
*RAM: G.SKILL Ripjaws 4GB (2x2GB) 1600 (PC3 12800) F3-12800CL7D-4GBRM
 
*PCB revision: 1.0
 
*Audio: Realtek ALC889 working after adding kexts (HDAudio 4in/4out) or with voodooHDA.
 
*LAN: Working OOB
 
*SATA/IDE: Enable AHCI, then working OOB
 
*Shutdown/restart/sleep: OOB
 
*Comments: Install appropriate [http://tonymacx86.blogspot.com/2009/12/dsdt-database-for-p55-motherboards.html DSDT.aml]; enable 64-bit HPET for sleep; enable AHCI (RAID will not work); update to 10.6.2 immediately before adding kexts; Gigabyte SATA ports may require JMicronATA.kext (?)
 
|Yes
 
|No
 
|-
 
|GA-P55-UD3R
 
|ATX
 
|Intel P55 Express
 
|
 
* Install method: Vanilla Mac OS 10.6.0 + 10.6.2 combo update.
 
* Boot loader: Chameleon 2.0-RC3.
 
* EFI environment: PC EFI 10.5 with patch for Core i5/i7.
 
* BIOS version: F5b.
 
* PCB revision: 1.0.
 
* Audio: Realtek ALC888 codec, removed ...888B.kext from /Extra, install AppleHDA.kext and HDAEnabler.kext
 
* LAN: Realtek 8111D, OK with driver in /System/Library/Extensions: Realtek R1000 (64-bit).
 
* SATA: OK Out-Of-the-Box(OOB), with SATA ports set to AHCI. Gigabyte ports require JMicronATA.kext.
 
* IDE: Not tested.
 
* Optical Drive: OK (OOB). SONY Optiarc SATA.
 
* Shutdown/restart: OK, with EvOReboot.kext.
 
* Sleep: not tested.
 
* Other kexts: .
 
* Other comments: When running with 4 memory sticks, increase the voltage to the memory controller to get the board stable.
 
|Yes, vanilla.
 
|No, kexts and DSDT patches required for shutdown/restart, LAN and audio.
 
|-
 
|GA-EP41-UD3L
 
|ATX
 
|Intel G41 /ICH-7
 
|
 
* CPU: Intel Core 2 Quad 2,83GHz (Q9550 = 12MB L2-cache, geekbench = 6200)
 
* Memory 2*2GB Kingston 800MHz (note: only 2 DIMMS are supported on this MOBO if they are faster than 667MHz)
 
* Chipset ICH-7 - out of the box
 
* Sound: iMic (works great even with 10.6.3, no extra drivers needed=no problems with Kexts) [http://www.griffintechnology.com/products/imic]
 
* LAN: RTL8111D - out of the box
 
* SATA disk - Hitachi 2TB 7200rpm (HDS7220020ALA330) works out of the box
 
* IDE DVD-RW - out of the box
 
* Graphics: Nvidia 9500GT silent oob
 
* Bluetooth: ($20 Cambridge Silicon Radio) works perfect with vanilla driver, isync tested with Nokia (E71) smartphone.
 
* Method used: Kakewalk (by mrjanek) [http://www.insanelymac.com/forum/index.php?showtopic=195248]
 
* Shutdown and reboot works, sleep doesn't (propaply its works with sleepenabler but I don't care)
 
|Yes
 
|Yes
 
|-
 
|GA-EP41-UD3L
 
|ATX
 
|Intel G41 /ICH-7
 
|
 
* Sound: RealTek ALC888 - working with these Kexts(see notes) [http://www.insanelymac.com/forum/index.php?showtopic=188349&st=0]
 
* LAN: RTL8111D - out of the box
 
* CPU: Pentium Dual Core 2,60 GHz
 
* Chipset ICH-7 - out of the box
 
* SATA disk - out of the box
 
* SATA DVD-RW - out of the box
 
* Graphics: Nvidia 9500GT - out of the box
 
* Method used: Used LifeHacker method but see notes [http://lifehacker.com/5360150/install-snow-leopard-on-your-hackintosh-pc-no-hacking-required]
 
Note:  Note: Disconnect all Sata devices except hard drive when installing. For sound I updated to 10.6.2 then deleted AppleHDA.kext and used
 
Kext Utility to install two kexts from Link above. iTunes will not work until sound is patched.
 
Important to note I did not use Lifehackers Bios settings, mobo gives an option to use best suggested settings, use these instead.
 
|Yes
 
|No
 
|-
 
|GA-EP43-DS3L
 
|ATX
 
|Intel P43 / ICH10
 
|
 
* Chipset ICH10 - needs SATA fix in DSDT or IOAHCIBlockStorageInjector.kext
 
* JMicron ATA - needs patched JMicronATA.kext
 
* Sound: RealTek ALC888 - working with DSDT (HPET & LegacyHDA) or additional patched HDA-Kext
 
* LAN : Realtek 8111C - out of the box
 
* Here is the link to the Blackosx Guide [http://www.insanelymac.com/forum/index.php?showtopic=%20180954 Guide]
 
* And this is a guide that shows multiple ways to make a Retail Bootloader [http://www.insanelymac.com/forum/index.php?showtopic=182227 Guide]
 
* (Also works with Snow Leopard Server).
 
* Be careful when upgrading to 10.6.2: panic appears and sound stops with old SleepEnabler & HDA-Kext (replace the whole Extensions folder with the 10.6.2 version and use KextUtility before rebooting)
 
update to 10.6.3 works with blackosx' note, '''except for sound that stops!'''
 
* [http://www.mediafire.com/?uttlzkii4ww Kext for 10.6.2]
 
|Yes
 
|No
 
|-
 
|GA-EP45T-DS3R
 
|ATX
 
|Intel P45 / ICH10
 
|
 
* Used hazards 10.6.0 with 10.6.1 and 10.6.2 update
 
* Installed with ElliotForceLegacyRTC and SMBIOSResolver
 
* Sound: RealTek ALC889a c
 
* LAN : Realtek 8111C - out of the box
 
* Graphics: works without qe ci but reinstalled with nvenabler and works perfect
 
* Need to disable ide support from bios after install
 
* Raid function not working so far use AHCI
 
|Yes
 
|No
 
|-
 
|GA-EP45-DS3L
 
|ATX
 
|Intel P45 / ICH10R
 
|
 
* Every bit of hardware works.
 
* GeForce 9800GT works via NVEnabler (I prefer this way) or GraphicsEnabler on some of Chameleon's.
 
* Sound: Realtek ALC889A: Working with LegacyHDA kext
 
* LAN: Works out-of-the-box
 
* Chipset ICH-10R, Shutdown+Restart - working out-of-the-box
 
* Sleep: Needs tweaks.
 
* No need to use smbios if using [http://cartri.net/blog/downloads cartri's modified BIOS] (also it runs smoother than Gigabyte's and don't beeps :)
 
|Yes
 
|No. Need LegacyHDA.kext or DSDT patching for audio (I use LegacyHDA). Need NVEnabler.kext with some bootloaders (latest Chameleon RC5 by Rekursor needn't it). With Cartri's BIOS runs smoothly without writing DSDT.aml and smbios.plist (but STILL NEEDS fakesmc.kext). Basically you need only LegacyHDA.kext, NVEnabler.kext and fakesmc.kext. Sleep works OOB for some users of Cartri's BIOS, but I got no luck.
 
|-
 
|GA-EP45-DS3R
 
|ATX
 
|Intel P45 / ICH10R
 
|
 
* All hardware is running smoothly :)
 
* GeForce 9400GT Sparkle 512MB Works With : "GraphicsEnabler=Yes" in "com.apple.boot.plist"
 
* Sound: Realtek ALC889A:  FULLY working with DSDT
 
* Chipset ICH-10R + Lan(out of the box)+Sleep+Shutdown+Restart Works fine
 
* download files [http://osx86install.com/support/87-snow-leopard-10-6-3-install-to-gigabyte-ep45-ds3r.html] for ep45-ds3r (DSDT+Chameleon 2.0 RC4+com.apple.Boot.plist+kexts+PC EFI V 10.6)
 
|Yes
 
|No
 
|-
 
|GA-EP45-UD3L
 
|ATX
 
|Intel P45 / ICH10
 
|
 
* MB rev. 1.1, Bios F7; BIOS F9 is out and works.
 
* Vanilla Mac OS X 10.6.0 retail DVD, booted using a boot CD with Chameleon2 RC3's cdboot without having any other OS-X installation.
 
* I initially followed this [http://www.insanelymac.com/forum/index.php?showtopic=187906/ guide] and used the updated files from this [http://www.insanelymac.com/forum/index.php?s=&showtopic=187906&view=findpost&p=1304292/ post]. Afterward I changed to [http://www.efixusers.com/showthread.php?t=644/ AsereBLN Booter 1.1.7] (based on Chameleon RC4 / PCEFI10.5), newer kexts and made a number of DSDT.aml modifications. Combo update to Mac OS X v10.6.2  without problems. Everything works in 32 and 64 bit.
 
* Audio: Realtek ALC888 works with LegacyHDA.kext and DSDT fix. Do not update to 10.6.3, '''sound will stop,''' the rest is ok, with blackosx' note on 10.6.3 kexts. Made 10.6.3 work 100% with new audio kext in /System/Library/Extensions
 
* LAN: Realtek 8111C (works OOB)
 
* SATA: works with AHCI in Bios. (IDE: not tested)
 
* GFX: GeForce 9800 GT 1GB (works with GraphicsEnabler and a disabler.kext which disables only the AppleUpstreamUserClient.kext responsible for mouse lag)
 
* Optical Drive: Samsung SH-S223B DVD-RW (works OOB)
 
* DSDT fixes for RTC, USB, sound, speedstep, shutdown, reboot and sleep
 
* Only two kexts needed: LegacyHDA.kext, FakeSMC.kext (v.2.5)
 
* [http://dl.dropbox.com/u/4352760/GA-EP45-UD3L%20Extra%202010-01-30.zip/ files in 'Extra' folder]
 
|yes
 
|yes
 
|-
 
|GA EP45-UD3r
 
|ATX
 
|Intel / ICH10
 
|
 
*I install from another harddrive running OSX
 
* If install retail version and upgrade from Apple you will do a lot more patching. It works but too much work.
 
* The easiest method was Using SnowOSX_Universal_10.6(432)GM-v3.5 to install 10.6 with all options selected.
 
* Then i used Snow_Leopard 10.6.2 by Hazard. I installed:
 
*Chameleon RC3 10.5
 
*NVEnabler (for my 9600gt)
 
*ElliotForceLegacyRTC (keeps cmos from resetting)
 
*ALC889a
 
*---You don't have to have your dsdt patched when you select those options---
 
* After Installation completes you need to delete dsmos.kext
 
*If you get a kernel panic use -v and boot again, sometimes works!
 
----
 
If you want update from apple. Update then restart
 
*boot into another OSX to remove some files after update completes
 
*delete dsmos.kext and get [http://www.mediafire.com/?kzgz2tnez4m sleepenabler.kext] for 10.6.2 (old kext will cause KP)
 
*After new sleepenabler, my sound died. Install [http://www.insanelymac.com/forum/index.php?s=afd33c7da03bc63a34c8a9b93409beae&showtopic=186698&pid=1374453&st=0&#entry1374453 ALC889a_sl_10]
 
*If you get a KP from AppleHDA.kext, Then delete it!
 
*All should be good depending on other minor hardware you use.
 
|Yes
 
|No
 
|-
 
|GA-EP45-UD3P F5
 
|ATX
 
|Intel / ICH10
 
|
 
* Retail 10.6 DVD (onto USB stick) + Chameleon 2.0RC3 + 10.6.2 combo update via [http://www.reiser.net/upgrading-osx]
 
* BIOS version: F5
 
* HPET: 64-bit
 
* Audio: Realtek ALC888 working
 
* LAN: Realtek OOB
 
* SATA/IDE: ICH10, but IDE-to-SATA prevented Chameleon from starting, so we removed that disk first and redid.
 
* Migration Asst ok on all except hung at SysPrefs > Network.  After redo, we migrated all except Network to fix.
 
* Shutdown/restart: OOB
 
* Sleep: Works OOB
 
* Boot loader: Chameleon 2.0-RC3
 
|Yes
 
|Yes
 
|-
 
|GA-EG41MF-US2H
 
|mATX
 
|Intel G41 / ICH7
 
|
 
* Vanilla Mac OS 10.6.0 + 10.6.2 combo update. (LIFEHACKER METHOD)
 
* Boot loader: Chameleon 2.0-RC4.
 
* BIOS version:F2.
 
* PCB revision: 1.0.
 
* Audio: Realtek ALC888 Not Working.
 
* LAN: Realtek 8111B, OOB.
 
* SATA/IDE: ICH7, OOB.
 
* Optical Drive: HL-DT-ST DVD-ROM GDR-H30N, IDE OOB.
 
* Shutdown/restart: OOB.
 
* Sleep: Not Working.
 
* HPET: Must be enabled, if not = kernel panic.
 
|Yes
 
|No
 
|-
 
|GA-K8NF-9
 
|ATX
 
|nForce 4 (?)
 
|
 
* BIOS Version: F11
 
* Graphics: Sapphire Radeon HD 4350 (no QE/CI but there are [http://www.insanelymac.com/forum/index.php?showtopic=153495 guides])
 
 
* Package with Information: [http://rapidshare.com/files/372637062/GA-K8NF-9_HackMac_Settings.zip]
 
 
* Install method: Snow Leopard 10.6.2 DVD from Hazard (not the "10.6.1-10.6.2" !!)
 
* Boot from DVD or copy the contents of the iso image to an USB drive and boot it (much faster!)
 
* Check all options as shown in the attached images and install (I've installed onto a SATA HDD - don't know if an IDE one would work too)
 
 
Then there was a problem:
 
After install on first boot, Mac would start the install wizard where you could type your name etc. But there was only the gray background and the cursor. I solved it by booting the hard drive in another AMD computer and made the install-wizard process there. Then it boots correctly.
 
Known bugs:
 
* Some graphic errors (may depend on the graphics card)
 
* Every sound output causes the Finder to restart itself (that might be the reason why the installer hasn't worked - because it wanted to play a sound and caused a Finder reset)
 
|<-- see there
 
|No, see there <--
 
|-
 
|-
 
|GA-P55A-UD4P
 
|ATX
 
|Intel P55
 
|
 
*Install using tonymacx86-iBootCD [http://www.tonymacx86.com/viewtopic.php?f=18&t=197] and retail dvd.
 
*Once installed, upgrade to 10.6.2 and use tonymacx86 MultiBeast Installer [http://www.tonymacx86.com/viewtopic.php?f=7&t=286]
 
with the following enabled:
 
*Chameleon->PC-EFI 10.6 netkas
 
*Audio->Realtek ALC889
 
*Graphics->NVenabler (for some nvidia cards, see HARDWARE)
 
*Network->RealtekR1000SL
 
*DSDT->DSDT-GA-P55A-UD4P-F7
 
*Extras->com.apple.boot.plist, smbios.plist
 
*Standard Snow Leopard Kexts->fakesmc.kext, JMicronATA.kext
 
 
*BIOS:
 
*Bios F7
 
*HPET 64-bit
 
*AHCI
 
 
*HARDWARE:
 
*Processor: i7-860
 
*Optical Drive: SATA Sony Optiarc 24X DVD/CD
 
*Graphics: dual EVGA GeForce 9800GTX+
 
*Notes: Everything is working (sleep, restart, shutdown, audio, LAN, dual graphic cards (see my post here [http://www.tonymacx86.com/viewtopic.php?f=7&t=318]), optical drive. Sleep/Restart issues resolved with EvOReboot.kext.
 
|Yes
 
|No
 
|-
 
|GA-M51GM-S2G
 
|Northbridge 6100 Southbridge 430
 
|
 
*AMD Athlon x2 4200
 
*2gb Ram 667 Mhz (DDR2)
 
*Choose ALC883 fully working without patch
 
*Did not choose any network patches
 
*Autodetected Marvell 88E1116 no patch needed
 
*Hard Drive:  Seagate 250 GB
 
*Integrated T.I. IEEE1394 autodetected
 
*VGA EVGA GT 430 detected as 32MB Graphics card. No working Kext
 
|
 
*Installed Hazard 10.6.1 and 10.6.2 Combo update (update to 10.6.8 causes continuous rebooting)
 
*Choose ALC883 Patch to get audio working
 
*Choose SMBIOS Patch
 
*Choose Legacy Kernel 10.2.0
 
*Choose AppleRTC but still get CMOS reset but I dont mind.
 
*Choose SMBIOSResolver
 
*Choose GrachicsEnabler to get video card to work. No acceleration.
 
*Choose Additional Fonts
 
*Choose Rosetta
 
*Choose X11
 
*Choose Quicktime
 
*Safari crashes on first run (after installation finishes) but works fine after that.
 
*Using Netgear Wg311T PCI Wifi card by adding id string to nekas' Atherosfix.kext and AirportAtheros21.kext
 
*Encore CS4 crashes, After Effects CS4 Works, Premiere CS4 Works
 
*Using Microsoft Wireless Desktop keyboard and mouse v1.1
 
|{{Yes}}
 
|{{No}}
 
|}
 
 
=== Intel===
 
{| class="wikitable" width="100%"
 
!Hardware Name
 
!Chipset
 
!Notes
 
!100% Working
 
!Fully Working w/o Patch
 
|-
 
| DX58SO
 
|ICH11
 
|Snow Leopard 10.6.3 Retail Original DVD (Gavaskar - Coimbatore,TamilNadu, INDIA) ([email protected])
 
*Support intel Core i5/i7
 
*Ram 8GB DDR3
 
*Nvidia Quadro Fx600
 
*Onboard Audio
 
*Onboard Lan
 
|  Yes
 
|  Yes
 
|-
 
| DH55TC
 
|ICH10
 
|Snow Leopard 10.6.3 Retail Original DVD (Gavaskar - Coimbatore,TamilNadu, INDIA) ([email protected])
 
*Support intel Core i5
 
*Ram 4GB DDR3
 
*Nvidia Quadro Fx600
 
*Onboard Audio
 
*Onboard Lan
 
|  Yes
 
|  Yes
 
|-
 
| DG33FB
 
|ICH8
 
|Snow Leopard 10.6.3 Retail Original DVD (Gavaskar - Coimbatore,TamilNadu, INDIA) ([email protected])
 
*Support intel Core2Quad
 
*Ram 4GB DDR2
 
*Nvidia 9400GT 1Gb
 
*Onboard Audio
 
*Onboard Lan
 
|  Yes
 
|  Yes
 
|-
 
| DP43TF
 
|ICH10
 
|Snow Leopard 10.6.2 Hazard(Miraz Kerala ( miraskm @ rediff.com)
 
*Do not select any kernel,
 
* Select azaliaaudio , nvenabler, nothing else 
 
|  Yes
 
|  Yes with QE
 
|-
 
|}
 
{| class="wikitable" width="100%"
 
!Hardware Name
 
!Chipset
 
!Notes
 
!EFI/kernel working
 
!Fully Working w/o Patch
 
|-
 
| DG41RQ
 
|ICH10
 
|Snow Leopard 10.6 RETAIL (BOOT USING EMPIRE EFI)
 
* Everything works except Video Acceleration
 
* You can update w/o problems
 
* Works as a real mac
 
|  Yes
 
|  Yes but no QE
 
|-
 
|}
 
 
 
=== MSI ===
 
=== MSI ===
 
{| class="wikitable" width="100%"
 
{| class="wikitable" width="100%"
Line 1,936: Line 6:
 
!EFI/kernel working
 
!EFI/kernel working
 
!Fully Working w/o Patch
 
!Fully Working w/o Patch
 +
!colspan=2| 32/64bit working ''with'' patches|-
 
|-
 
|-
 
|P35 NEO-F
 
|P35 NEO-F
Line 1,951: Line 22:
 
|Yes 64bit (Vanilla)
 
|Yes 64bit (Vanilla)
 
|No
 
|No
 +
|{{Y}}
 +
|{{Y}}
 
|-
 
|-
 
|945P Neo3 (MS-7236)
 
|945P Neo3 (MS-7236)
Line 1,978: Line 51:
 
* Memory: GEIL 2x2Gb DDR2 1300 MHz  
 
* Memory: GEIL 2x2Gb DDR2 1300 MHz  
 
| PC_EFI 10.5 with DSDT, Chameleon 2 RC4
 
| PC_EFI 10.5 with DSDT, Chameleon 2 RC4
| unknown
+
| Yes
 +
|{{Y}}
 +
|{{Y}}
 
|-
 
|-
 
|K9AGM2 (-FIH)
 
|K9AGM2 (-FIH)
Line 2,025: Line 100:
 
| Yes/64bit Vanilla
 
| Yes/64bit Vanilla
 
| Yes
 
| Yes
 +
|{{Y}}
 +
|{{Y}}
 
|-
 
|-
 
|K9A2 Platinum
 
|K9A2 Platinum
Line 2,057: Line 134:
 
*Lots of applications for 10.6.2 [http://cid-8b65993ef55cf014.office.live.com/browse.aspx/.Public/OSx86/Snow%20Leopard/Applications%20for%20OSx86%20^5aplikacje^6]
 
*Lots of applications for 10.6.2 [http://cid-8b65993ef55cf014.office.live.com/browse.aspx/.Public/OSx86/Snow%20Leopard/Applications%20for%20OSx86%20^5aplikacje^6]
 
|-
 
|-
|}
+
|K9N Neo v2
 
+
|Nforce 520
=== Shuttle===
+
|Installation method: Load Snow_Leopard_10.6.1-10.6.2_SSE2_SSE3_Intel_AMD_by_Hazard
{| class="wikitable" width="100%"
+
* CPU: AMD 64bit 4000+
!Hardware Name
+
* SATA: Works 100%
!Chipset
+
* GRAPHIC: GeForce 8600 GT  DDR3
!Notes
+
* IDE: It boots from my IDE 80 GB 7200 RPM
!EFI/kernel working
+
* LAN: Works, no kext selected on install
!Fully Working w/o Patch
+
* Audio: working with AppleHDA.kext -  PCI-card M-Audio 2496 working with ENvy24 ,MIDI not working
|-
+
* USB: Works 1.1 and 2.0
|K45/K48
+
* Shutdown/Restart: Works 100%
|INTEL p45 / ICH7
+
* Memory: Kingston 2x2Gb DDR2 667 MHz
|Intel E7200 @ 3.2Ghz
+
| PC_EFI 10.5 with DSDT, Chameleon 2 RC2 , Legacy_kernel 10.2
*Corsair 2x1GB DDR2-PC6400 800 Mhz
+
| Use these selections in Hazard's install:
*On Board Intel GMA950 DSDT Patched
+
* 10.2 Combo Update
*ICH7 DSDT + IDE VIA E/E/IOATAFamily.kext
+
* Legacy_kernel 10.2
*Onboard NIC Yukon 88E8056 Patched IONetWorkingFamily in E/E
+
* Graphic Enabler
*Onboard Audio via E/E/ALC662.kext
+
* Legacy Apple RTC
*Snow Leopard Retail DVD installed from existing Mac. Stock DVD no patch. Base System unmodified. Uses Chameleon or boot-132 E/E w/ DSDT only.
+
* IOATAfamily_fix
Requires:NullCPUPowerManagement.kext, IOATAFamily.kext, OpenHaltRestart.kext, fakesmc.kext, PlatformUUID.kext, and SleepEnabler. No base mods only E/E
+
* IOATAupstream user client disabler
|Yes, Vanilla
+
* UUID
|Yes 32/64 bit
+
* AMD
|-
+
* Roseta (Optional)
|}
+
* If you want to update to 10.6.6 download from Apple's suite 10.6.6 combo update. Run the update, after update is finished DO NOT RESTART COMPYTER!!!Download legacy_kernel 10.5  install it and than hit restart in update window!
 
+
* Boot it with -v to check if there is any error
=== SuperMicro===
+
* If u want to boot it in 32bit mode add arch=i386 to boot.plist
{| class="wikitable" width="100%"
+
  <key>Kernel Flags</key>
!Hardware Name
+
  <string>arch=i386</string>
!Chipset
+
* Dont run in Cameleon boot loader arch=i386 command you will still runing 64bit system because your Kernel Flag will be
!Notes
+
* <string>-force64 arch=i386</string>
!EFI/kernel working
+
|{{Y}}
!Fully Working w/o Patch
+
|{{Y}}
|-
+
|X8DAL-i-O
+
|INTEL 5500 / ICH10R
+
|2x Intel Xeon W3580
+
*6x4GB Patriot Signature DDR3 1333 ECC/Registered
+
*GeForce GTX 260 (EFI String)
+
*ICH10R IOATAFamily.kext / IOAHCIInjector.kext in E/E - not used - Used 3ware 9650 for boot, 6x Seagate 500 7200.12 Raid 0 - Follow: [http://www.insanelymac.com/forum/index.php?showtopic=66345]
+
*Onboard NICs Intel 82574L (2x) OOB
+
*Onboard Audio via VoodooHDA.kext
+
*Snow Leopard Retail DVD installed using custom boot USB Flash drive w/ Chameleon. Base System unmodified. Uses Chameleon or PCI-EFI E/E. Sleep works with DSDT patch. Requires:NullCPUPowerManagement.kext, OpenHaltRestart.kext, fakesmc.kext, PlatformUUID.kext, and SleepEnabler. No base mods -- only E/E
+
|Yes, Vanilla
+
|Yes 32/64 bit
+
|-
+
|}
+
 
+
Beware: Xeon W3580 cannot be run in dual socket motherboards. Only 5xxx series can. This post is a lie or there is a typo
+
 
+
==Graphics Cards==
+
Please specify if your card is AGP, Integrated, PCI or PCI-E.<br />
+
Also, place chip and board manufacturer in their respective column.
+
 
+
===AGP===
+
 
+
====NVIDIA====
+
{| class="wikitable" width="100%"
+
|-
+
!Hardware Name
+
!Board-Manufacturer
+
!Notes
+
!OpenCL / QE / CI
+
!Resolution
+
!Fully Working w/o Patch
+
|-
+
|7600GT (DVI/DVI)
+
|ASUS
+
|Works with EFI-string in Dual DVI 1920*1200 but MANY CRASH ! (KP)
+
|?/Yes/Yes
+
|All
+
|No
+
|-
+
|GeForce 8200 128MB
+
|XFX
+
|PC_EFI 10.5 GraphicsEnabler, plus [http://www.insanelymac.com/forum/index.php?s=&showtopic=185428&view=findpost&p=1325737 dsdt mod] (without dsdt mod results in blinking blue screen)
+
* Note that the dsdt mod linked above is for a 6200 AGP, so I changed some of the values for my 6800.
+
|No/Yes/Yes
+
|All
+
|Yes (just GE and DSDT mod)
+
|-
+
|GeForce 8600 GT 512MB
+
|Nvidia
+
|Installed following this [http://wp.me/pr9FI-aO guide]
+
|Yes/Yes/Yes
+
|All
+
|Yes
+
|-
+
|}
+
 
+
===PCI Express===
+
 
+
====NVIDIA====
+
{| class="wikitable" width="100%"
+
|-
+
!Hardware Name
+
!Board-Manufacturer
+
!Notes
+
!OpenCL / QE / CI
+
!Resolution
+
!Fully Working w/o Patch
+
|-
+
|NVIDIA GeForce GTX 260 896MB
+
|EVGA
+
|Installed with Snow Leopard 10.6.1-10.6.2 SSE2 SSE3 Intel AMD by Hazard; NVEnabler selected.
+
|Not tested / No / No
+
|All resolutions up to 1680x1050, could not test higher. Did not test dual displays.
+
|Used NVEnabler. Did not test EFI string.
+
|-
+
|EN6200TC 64Mb (256Mb shared)
+
|ASUS
+
|SnowOSX Universal 10.6.2 used
+
|Not Tested/Not Tested/Not Tested
+
|up to 1280x1024
+
|Not Tested
+
|-
+
|GeForce 7300GT 256MB
+
|Zotac
+
|Use GraphicsEnabler=Yes in boot.plist. DVI and VGA both work, as does VGA with adapter on DVI. TV-Out not working.
+
|Yes/Yes/Yes
+
|All
+
|Yes
+
|-
+
|GeForce 7600GT 256MB
+
|HP OEM
+
|Use GraphicsEnabler=Yes in boot.plist. Both DVI ports work with DVI and VGA with adapter. TV-Out untested.
+
|Yes/Yes/Yes
+
|All
+
|Yes
+
|-
+
|GeForce 7900GT 256MB
+
|EVGA
+
|EFI String with OSX86 Tools
+
|Yes/Yes/Yes
+
|All
+
|Yes (with EFI string)
+
|-
+
|GeForce 8400GS 512MB
+
|ASUS Silent
+
|EFI String (OSx86Tools -> Custom GFX String)
+
|Yes/Yes/Yes
+
|All
+
|Yes (EFI String)
+
|-
+
|GeForce 8400GS 512MB <br>(N8400GS 512H)
+
|MSI
+
|Work ok with VGA (DVI untested)
+
|Yes/Yes/Yes
+
|All
+
|Yes (with nvenabler.kext)
+
|-
+
|GeForce 8400GS 512MB
+
|ASUS Silent
+
|Thank you Netkas Only PC EFI 10,5 and Graphic Enabler in com.apple.boot.plist
+
|Yes/Yes/Yes
+
|All
+
|Yes (PC EFI 10,5 no need string)
+
|-
+
|GeForce 8400GS 256MB
+
|Palit
+
|NVEnabler64.kext, dual screen works, OpenCL/QE/CI works like charm.
+
|Yes/Yes/Yes
+
|All
+
|Yes
+
|-
+
|GeForce 8400GS 256MB HDMI
+
|PNY
+
|NVEnabler64.kext,  works, OpenCL/QE/CI works like charm.
+
|Yes/Yes/Yes
+
|All
+
|Yes
+
|-
+
|GeForce 8400GS 256MB (DVI+VGA)
+
|PNY
+
|
+
EFI-Strings (tested on [http://osx86.sojugarden.com/installer/ myHack] installation method)
+
|Yes/Yes/Yes
+
|All
+
|Yes
+
|-
+
|GeForce 8500 GT 512Mb
+
|MSI
+
|NVEnabler64.kext, OpenCL/QE/CI works like charm.
+
|Yes/Yes/Yes
+
|All
+
|Yes
+
|-
+
|GeForce 8600 GT 256MB
+
|Palit
+
|Works With : "GraphicsEnabler=Yes" in "com.apple.boot.plist"
+
|Yes/Yes/Yes
+
|All
+
|Not Tested
+
|-
+
|GeForce 8600 GT 512MB XXX Alpha Dog Ed.
+
|XFX
+
|Works With : OTB in 10.6.0 - UPG to 10.6.4, dual screen, no patches
+
|Yes/Yes/Yes
+
|All
+
|Yes
+
|-
+
|GeForce 8800 GTS 512MB G92
+
|BFG
+
|Works With : NVEnabler.Kext & NVEnabler64.kext
+
|Yes/Yes/Yes
+
|All
+
|Yes with mentioned Kexts
+
|-
+
|GeForce 8800 GTS 512MB G92
+
|Gigabyte
+
|Works With : NVEnabler.Kext & NVEnabler64.kext
+
|Yes/Yes/Yes
+
|All
+
|Yes with mentioned Kexts
+
|-
+
|GeForce 9400 GT 512MB
+
|XFX
+
|EFI String (OSx86Tools -> Custom GFX String, Dual Display)
+
|Yes/Yes/Yes
+
|All
+
|Yes (EFI String)
+
|-
+
|GeForce 9400 GT 512MB
+
|Gainward
+
|EFI String (OSx86Tools and created a Custom GFX String)
+
|Yes/Yes/Yes
+
|All
+
|Yes (EFI String)
+
|-
+
|GeForce 9400 GT 512MB
+
|Biostar
+
|EFI String (OSx86Tools and created a Custom GFX String)
+
|Yes/Yes/Yes
+
|All
+
|Yes (EFI String)
+
|-
+
|GeForce 9500 GT
+
|EVGA
+
|generated EFI string using NVCAP from this thread [http://www.insanelymac.com/forum/index.php?showtopic=139775]
+
|Yes/Yes/Yes
+
|All
+
|Yes
+
|-
+
|GeForce 9500GT 1GB
+
|EVGA
+
|EFI string or NVEnabler 64.kext
+
|Yes/Yes/Yes
+
|All
+
|Yes
+
|-
+
|GeForce 9600 GT 1GB
+
|GIGABYTE or any Company
+
|Works Fully with [http://www.kexts.com/cat/9-nvidia.html NVEnabler64.kext] ( " Ammar-y " [http://www.bramjnet.com/vb3/showthread.php?t=1033024 www.bramjnet.com] ).
+
|Yes/Yes/Yes
+
|All
+
|Yes
+
|-
+
|GeForce 9600 GSO 384mb
+
|Palit
+
|Works with NVEnabler64.kext, dual monitor works, OpenCL works.
+
|Yes/Yes/Yes
+
|All
+
|Yes
+
|-
+
|GeForce 9600 GT
+
|Gigabyte N96TSL-1GI
+
|Works Out-Of-the-Box using GraphicsEnabler=Yes option with Chameleon 2.0-RC3-r658-bin and PC EFI 10.5.
+
|Yes/Yes/Yes
+
|All
+
|Yes
+
|-
+
|GeForce N9800GT 512MB OC
+
|MSI
+
|EFI String
+
|Not Tested/Yes/Yes
+
|All
+
|Yes(EFI string)
+
|-
+
|GeForce 9800GT 512MB
+
|Palit
+
|Need Chameleon 2.0 RC4 and GraphicsEnabler=Yes in com.apple.boot.plist(no kexts, no EFI string).
+
|Not Tested/Yes/Yes
+
|All
+
|Yes
+
|-
+
|GeForce 9800GT 512MB
+
|Sparkle
+
|Works out of Box
+
|Yes/Yes/Yes
+
|All Res.
+
|Full, without patch
+
|-
+
|GeForce 9800GT 1GB
+
|EVGa
+
|Works out of Box WITH DUAL MONITORS
+
|Yes/Yes/Yes
+
|All Res.
+
|Full, without patch
+
|- 
+
|GeForce 9800GT 1GB
+
|Sparkle
+
|Works WITH DUAL MONITORS in 10.6.3
+
|not tested
+
|All Res.
+
|NO: needs NVkushinstaller.pkg
+
|- 
+
|GeForce 9800 GT 1GB
+
|Inno 3D
+
|Works with EFI string from EFIstudio or GraphicsEnabler=Yes option in AsereBLN Booter (Based on Chameleon RC4 / PCEFI10.5). Also needs a disabler.kext which disables the AppleUpstreamUserClient.kext responsible for mouse lag.
+
|Yes/Yes/Yes
+
|All
+
|Yes (with EFI string)
+
|-
+
|GeForce 9800 GT ECO
+
|Zotac (ZT-98GES3G-FSL)
+
|Working with NVEnabler 64.kext. Under 10.6.2 need kexts NVDANV50Hal.kext NVDAResman.kext from 10.6.1 to avoid blue screen after resolution change or returning from sleep.
+
|Yes/Yes/Yes
+
|All
+
|Yes but need a kext
+
|-
+
|GeForce 9800 GT 1GB (XLR8 PE)
+
|PNY
+
|Working with NVEnabler from Hazard disc
+
|Yes/Yes/Yes
+
|All
+
|Yes
+
|-
+
|GeForce 9800 GTX+ 512mb
+
|Palit
+
|Works Out-of-the-box with Efi string in com.apple.boot.plist, sleep and wake works not with normal sleep/restart fix
+
|Yes/Yes/Yes
+
|All
+
|Yes (with Efi string)
+
|-
+
|GeForce 9800 GTX+ 512mb
+
|EVGA
+
|Works, NVEnabler 64. Dual working with EFI String for 2nd card.
+
|Yes/Yes/Yes
+
|All
+
|Yes
+
|-
+
|GeForce 210 1024mb
+
|asus
+
|use kext geforce gts 250 from (http://www.kexts.com/downloads.php?do=file&id=431)works in 32/64 bit
+
|Yes/Yes/Yes
+
|All
+
|Yes (use kext)
+
|-
+
|GeForce 210 512mb
+
|EVGA
+
|For 32 bit, you can use ATY_init, but the NVCAP may be wrong. I used this [http://www.insanelymac.com/forum/index.php?act=attach&type=post&id=68100] custom EFI string with a corrected NVCAP, and added the extra keys from ATY_init's info.plist, and that lets me run in 64 bit.
+
|No/Yes/Yes
+
|All
+
|Yes (w/ EFI string)
+
|-
+
|GeForce GT 240 512mb GDDR5 (device ID 0x0ca3)
+
|Gigabyte
+
|Works with NVEnabler 0.1.kext or NVEnabler 64.kext installed into /Extra/Extensions.
+
You only need to have the correct device ID set in NVEnabler kext info.plist like in:
+
<key>IOPCIPrimaryMatch</key>
+
<string>0x0ca310de</string>
+
<br />Important: do not change /S/L/E/NVDAResman.kext or /S/L/E/NVDANV50Hal.kext like explained in [http://www.projectosx.com/forum/index.php?showtopic=4] or QE won't work
+
|Yes/Yes/Yes
+
|All
+
|No
+
|-
+
|GeForce GTS 220 512mb
+
|Inno3D
+
|Works with adding EFI String from OSX86Tool for a 9800GTX DDL with Chameleon RC4.  Working with EFI String in Boot.plist with Chameleon RC4.
+
|No/Yes/Yes
+
|All
+
|Yes (with Efi string)
+
|-
+
|GeForce GTS 250 512mb
+
|Galaxy
+
|Works with adding EFI String from OSX86Tool for a 9800GTX DDL with Chameleon RC3.  Card is technically a 9800GTX.  Still haven't gotten it working with Chameleon RC4. 
+
|Yes/Yes/Yes
+
|All
+
|Yes (with Efi string)
+
|-
+
|GeForce GTS 250 512mb
+
|Zotac (ZT-20105-10P)
+
|Working with NVEnabler 64.kext. Under 10.6.2 need kexts NVDANV50Hal.kext NVDAResman.kext from 10.6.1 to avoid blue screen after resolution change or returning from sleep.
+
|Yes/Yes/Yes
+
|All
+
|Yes but need a kext
+
|-
+
|GeForce GTS 250 1024mb
+
|Gainward
+
|Works with adding EFI String to 'com.apple.Boot.plist'
+
|Yes/Yes/Yes
+
|All
+
|Yes (with Efi string)
+
|-
+
|GeForce GTS 250 1024mb Dark Knight (DVI, VGA)
+
|Asus
+
|Works with NVEnabler 64.kext; add device id into the kext (optional--some people report that its necessary, mine works just fine without it)
+
|Yes/Yes/Yes
+
|All
+
|Yes, but need a kext
+
|-
+
|GeForce GTS 250 1024mb (Dual DVI)
+
|MSI
+
|Works with Chameleon 2 RC4 + GraphicsEnabler=Yes (+ PciRoot=1 on Gigabyte motherboards) 
+
|Yes/Yes/Yes
+
|All
+
|Yes (with Efi string)
+
|-
+
|GeForce GTS 250 1024mb (DVI, VGA, HDMI)
+
|Gigabyte
+
|PC EFI 10.6 w/ GraphicsEnabler=Yes. DVI & VGA work independently HDMI as secondary only. No HDMI sound unless connected to working motherboard SPDIF via 2pin cable.
+
|Yes/Yes/Yes
+
|All
+
|Yes (with GraphicsEnabler)
+
|-
+
|GeForce GTX 260 896mb
+
|eVGA
+
|Works with NVEnabler [http://tinyurl.com/ygcgnd5] and tested with Chameleon RC2.
+
|Yes/Yes/Yes
+
|All
+
|Yes
+
|-
+
|GeForce GTX 260 SC 896mb
+
|eVGA
+
|Works with adding EFI String from OSX86Tool for a 9800GTX DDL with Chameleon RC3.  Still haven't gotten it working with Chameleon RC4.  How it works with the 9800GTX DDL injection is beyond me, but it works!
+
|Yes/Yes/Yes
+
|All
+
|Yes (with Efi string)
+
|-
+
|Palit GTX 260 216SP Sonic(625Mhz)card 896MB
+
|Palit
+
|I(Him.J.)was able to Install this unique card by using EFI strings in EFI studio,Install NVENABLER.kext &NVENABLER64.kext also(kexts.com) If you are getting blank screen(monitor off)while booting.Delete NVDAN50HAL &NVDAResman.kext from another Mac or by booting into -s mode and using commands( Google it)& then boot into VESA and then try EFI Strings.
+
|Yes/Yes/Yes
+
|All
+
|Yup(with EFI strings)
+
|-
+
|GeForce GTX 275 896Mb
+
|Palit P5P43TD Pro
+
|Works With : NVEnabler.Kext & NVEnabler64.kext
+
(64 + 32 Bit  works) Follow [http://www.insanelymac.com/forum/index.php?automodule=blog&blogid=591&showentry=769 This Guide]
+
|No/Yes/Yes
+
|All
+
|Yes
+
|-
+
|Geforce GTX 280 1024Mb
+
|EVGA
+
|WORKS With: Efi Strings, also DUAL Cards work
+
|Yes/Yes/Yes
+
|All
+
|Work with out patches: Yes with EFI String, MUST remove all other patches
+
|-
+
|GeForce GTX 285 AMP! Edition 1024MB
+
|ZOTAC
+
|Works With EFI String / 32 and 64 Bit
+
|Yes/Yes/Yes
+
|All
+
|Yes
+
|-
+
|GeForce GTX 285 SSSC 1024Mb
+
|EVGA
+
|Works With : NVEnabler.Kext & NVEnabler64.kext
+
(64 + 32 Bit  works) Follow [http://www.insanelymac.com/forum/index.php?automodule=blog&blogid=591&showentry=769 This Guide] + EFI String Follow [http://aquamac.proboards.com/index.cgi?board=hack1&action=display&thread=509 Aquamacs Guide]
+
|Yes/Yes/Yes
+
|All
+
|Yes (with EFI String + Enabler)
+
|-
+
|-
+
|GTX 285 1024MB
+
|Palit
+
|No kext needed. Full QE-CI using GraphicsEnabler=Yes
+
|Yes/Yes/Yes
+
|All
+
|Yes
+
|-
+
 
+
|GeForce GTX 295 1792MB
+
|EVGA Co-op
+
|Works with EFI String and NVGTX295.Fix.kext.
+
Checkout this [http://www.insanelymac.com/forum/index.php?s=&showtopic=184318&view=findpost&p=1338125 all-in-one pack and install guide]
+
|Yes/Yes/Yes
+
|all
+
|yes
+
|-
+
|GeForce GTS 250 1024mb (DVI, VGA, HDMI)
+
|ASUS
+
|PC EFI 10.6 w/ GraphicsEnabler=Yes. DVI & VGA work independently HDMI as secondary only. No HDMI sound unless connected to working motherboard SPDIF via 2pin cable. USED GTS 250 1024MB nvinject.kext works with 10.6.3 as well
+
|Yes/Yes/Yes
+
|All
+
|Yes (with GraphicsEnabler)
+
|-
+
|GeForce GTS 250 512Mb DDR3 (DVI, VGA, HDMI)
+
|Galaxy
+
|No EFI string needed / GraphicsEnabler = YES, NVInject = YES, NVEnabler = YES, (not tested with DVI, or HDMI yet)
+
| Yes/Yes/Yes
+
| ALL (currently running [email protected])
+
|Yes
+
|-
+
|GeForce GT 220 1024Mb DDR3 (DVI, VGA, HDMI)
+
|Gainword
+
|No EFI string needed / GraphicsEnabler = YES, NVEnabler = YES, (tested with DVI)
+
| Yes/Yes/Yes
+
| ALL (currently running [email protected])
+
|Yes
+
|}
+
 
+
====ATI====
+
{| class="wikitable" width="100%"
+
|-
+
!Hardware Name
+
!Board-Manufacturer
+
!Notes
+
!OpenCL / QE / CI
+
!Resolution
+
!Fully Working w/o Patch
+
|-
+
|-
+
|Radeon R4650 1Gb GDDR2
+
|MSI
+
|Install EVOenabler, ATI4600controller and ATIx2000 kexts. Edit the kexts with your device ID. Set GraphicsEnabler=y in the boot.plist file. Had to use switchresX to input custom resolution because OSX didn't recognize my displays 16/9 apsect ratio. It only showed 16/10 resolutions.
+
|Yes/Yes/Yes
+
|All
+
|Yes, see notes. ( only tested DVI to VGA )
+
|-
+
|Radeon HDG4670 1Gb GDDR2
+
|Sapphire
+
|Install EVOenabler, ATI4600controller and ATIx2000 kexts. Edit the kexts with your device ID. Set GraphicsEnabler=Yes in the boot.plist file. PC_Efi 10.6. HDMI NOT WORKING.
+
|Yes/Yes/Yes
+
|All
+
|Yes, see notes.
+
|-
+
|Radeon Ultimate HD4670 512Mb GDDR3
+
|Sapphire
+
|pcEFI_10.5 used
+
|Yes/Yes/Yes
+
|All (up to 1920x1080 tested)
+
|EFI String needed
+
|-
+
|Radeon HD4830 512Mb GDDR3
+
|Force3D
+
|Use Legacy4800Controller.kext and install Netkas QE/CI patch for 10.6.2. There is a mouse jumping problem with dual monitor settings.
+
|yes/yes/yes
+
|All
+
|Yes
+
|-
+
|Radeon HD4850 512Mb GDDR3
+
|Palit
+
|kext used, checkout this [http://www.insanelymac.com/forum/lofiversion/index.php/t201524.html]
+
|yes/yes/yes
+
|only with best resolution of monitor
+
|Yes
+
|-
+
|Radeon HD4850 512Mb GDDR3 XXX edition
+
|XFX
+
|add device id to info.plist in hd4800controller.kext, booted with GraphicsEnabler=Yes with chameleon 2 rc4 and PCI-EFI 10.6 from netkas.org.  VGA adapter only works on one port and only on a fresh boot; it remains black when you come out of sleep.  Dual DVI monitors work perfectly, however.  I found that other installation methods caused the graphics fan to not work and the card to overheat quickly.
+
|yes/yes/yes
+
|up to 1920x1080 dual monitors tested
+
|No
+
|-
+
|Radeon HD4850 GDDR3 512Mb (VGA-HDMI-DVI), Dual-Slot model
+
|Sapphire
+
|Keep SL stock kexts and install LegacyATI4800controller.kext with Kext Helper. Boot with "GraphicsEnabler=Yes" without quotas or set it to the com.apple.boot.plist file which is located in /Library/Preferences/SystemConfiguration/. All ports VGA, HDMI, DVI are working.
+
|Yes/Yes/Yes
+
|All
+
|Yes
+
|-
+
|Radeon HD4850 1Gb GDDR3
+
|Sapphire
+
|kext used [http://www.insanelymac.com/forum/index.php?showtopic=206466&pid=1380825&mode=threaded&start=#entry1380825]
+
|Yes/Yes/Yes
+
|install with boot option -x
+
|Yes (only DVI output tested)
+
|-
+
|Radeon HD4870x2 2Gb GDDR5 Dual DVI + SVIDEO
+
|HIS
+
|PCI EFI V 10.6 & Chameleon 2.0-RC4. Kexts needed: [http://www.kexts.com/view/5-aty_init.kext.html] [http://files.netkas.org/QE_CI_Exotic%20patch%2010.6.2.pkg] [http://files.netkas.org/10.6.2/LegacyATI4800Controller.kext.tar.bz2]. Boot with -x flag. Install ATY_Init, QE/CI Exotic & Legacy. Confirm your device-id is in ATIRadeonX2000 & ATI4800Controller in S/L/E (this may not be necessary since we have Legacy -but do so anyway). Run SL Kext Utility (v2.3.2). Add arch=i386 & GraphicsEnabler=y to com.apple.Boot.plist. Cross fingers, reboot.
+
|No/No/No
+
|None
+
|No
+
|-
+
|Radeon HD4890 1024Mb GDDR5
+
|Sapphire
+
|Install Chameleon v2.0-RC5 r747-restarat
+
Delete sleepenabler end install NullCPUPowerManagement- restart
+
kext used:
+
1. 7 radeon HD 48X0 drivers.pkg,
+
2. enabler for Nvidia and multiple ATI carts,
+
3. qe_ci_exotc pacage 10.6.2(by Zeus),
+
4. a fix to fix-restart
+
(you have all the kexts.com)
+
|Yes/Yes/Yes
+
|All
+
|Yes with kexts
+
|-
+
|Radeon HD5870 HD5750
+
|XFX
+
|Used Tonymacx86's iBoot
+
|Not Checked Yet
+
|All (1920x1080 tested)
+
|No need to patch DSDT, just follow notes
+
|}
+
 
+
===Integrated===
+
{| class="wikitable" width="100%"
+
|-
+
!Hardware Name
+
!Board-Manufacturer
+
!Notes               
+
!QE / CI
+
!Resolution
+
!Fully Working w/o Patch
+
|-
+
|GMA 950 mobile
+
|Intel
+
|Only 32bit support. Working with "Snow Leopard 10.6.1-10.6.2 Intel AMD made by Hazard"
+
|Yes/Yes
+
|All. Tested only 1280x800 (Notebook Samsung q35)
+
|No- Edit com.apple.Boot.plist add string GMA950 OSX86Tools OR replace  AppleIntelGMA950.kext & AppleIntelIntegratedFramebuffer.kext from 10.5.8 [http://www.insanelymac.com/forum/index.php?s=819068f1faab9cd84ac60d32ccf204ca&showtopic=199572&st=0]
+
|-
+
 
+
|GMA 900 mobile (915GM Chipset)
+
|Intel
+
|Working, only 32bit support. '''Note:''' On Snow Leopard 10.6.2 Intel AMD made by Hazard Translucent bar not working perfectly.
+
|Yes/Yes
+
|All resolutions working.
+
|Working with patch. Using GMA900 drivers from iPC 10.5.6.
+
|-
+
|X3100(intel 965)
+
|intel
+
|working, I have tried with Mac os x universal
+
|?/?
+
|I have tried without drivers, so only 1024x768
+
|Working without patch, but I would recommend to google it
+
|-
+
|GMA 950 mobile (945GM Chipset)
+
|Intel
+
|Full Working.
+
|Yes/Yes
+
|All resolutions working.
+
|YES
+
|-
+
 
+
|GMA 950 mobile (945GM Chipset)
+
|Intel
+
|Full Working.
+
|Yes/Yes
+
|All resolutions working.
+
|
+
|}
+
 
+
==Network Cards==
+
===Wireless===
+
{| class="wikitable sortable" width="100%"
+
!Interface
+
!Standard
+
!Device
+
!Manufacturer
+
!Chipset
+
!Notes
+
!colspan="2"| 32/64bit working ''with'' patch
+
|-
+
|USB
+
|B/G
+
|RTL8187B
+
|Realtek
+
|RTL8187B
+
|Driver [http://redirectingat.com/?id=292X457&xs=1&url=http%3A%2F%2Feurico.net%2Ffiles%2Fdriver_wlan_usb_snow.zip&sref=http%3A%2F%2Fwiki.osx86project.org%2Fwiki%2Findex.php%3Ftitle%3DHCL_10.6.3 Realtek RTL8187B]. Have to use crappy Realtek software.
+
|Yes
+
|No
+
|-
+
|USB
+
|b/g
+
|DWL-G122.rev e1
+
|D-Link
+
|Ralink
+
|[http://www.insanelymac.com/forum/index.php?showtopic=215539 Driver]
+
|Yes
+
|No
+
|-
+
|USB
+
|b/g
+
|F5D7050 v3xxx
+
|Belkin
+
|Ralink RT2501 (USB version of RT2500)
+
|Works by use of RTUSB D71w-1.3.0.0_UI-2.0.0.0_2009_10_30.dmg" file (USB(RT257X/RT2671/RT2500) 10/30/2009 V1.3.0.0 10.3/10.4/10.5/10.6) from [http://www.ralinktech.com.tw/support.php?s=3 Ralink website]
+
|Yes
+
|Yes
+
|-
+
|USB
+
|b/g/N
+
|DWA-140
+
|D-Link
+
|
+
|Download drivers 10.5 from D-link
+
|Yes
+
|No
+
|-
+
|USB
+
|b/g/N
+
|DWA-125
+
|D-Link
+
|Ralink 3070
+
|Download driver USB(RT2870 /RT2770 /RT307X /RT2070 /RT3572) from [http://www.ralinktech.com/support.php?s=3 Ralink support]
+
|Yes
+
|Yes
+
|-
+
|USB
+
|b/g/N
+
|C150RU
+
|Conceptronic
+
|Ralink 3070
+
|Download driver USB(RT2870 /RT2770 /RT307X /RT2070 /RT3572) from [http://www.ralinktech.com/support.php?s=3 Ralink support]
+
|Yes
+
|Yes
+
|-
+
|USB
+
|A/G/N
+
|DWA-160 rev A2
+
|D-Link
+
|Atheros ar9170
+
|(07d1:3a09) Download driver Mac OS 4.0.0.10 from [ftp://ftp.dlink.com/Wireless/dwa160/Drivers/dwa160_mac_drivers_40010.zip D-Link support]
+
|Yes
+
|No
+
|-
+
|USB
+
|b/g/n
+
|WUSB100-RM V2
+
|LinkSys
+
|Ralink 2870
+
|Download drivers 10.6 from Ralink chipset 2870
+
|?
+
|YES
+
|-
+
|PCI
+
|b/g/n
+
|WirelessN TP-Link TL-WN851N / TL-WN951N
+
|TP-Link
+
|Atheros
+
|Native 32bit support, recognized as AirPort Extreme, $30. For 64bit [http://www.mediafire.com/?mjjwmzoqjyy  IO80211Family.kext] required in /S/L/E. Causes kernel panic with Core i5/i7 processors.
+
|Yes
+
|No
+
|-
+
|PCI-E Mini (Notebook)
+
|b/g
+
|AR5BXB61
+
|AzureWave
+
|Atheros 5006EG
+
|Only 32bit support, recognized as AirPort. Working with "Snow Leopard 10.6.1-10.6.2 Intel AMD made by Hazard" (tested notebook Samsung q35)
+
|Yes
+
|No
+
|-
+
|PCI-E Mini (Notebook)
+
|b/g
+
|AR5BXB63
+
|AzureWave
+
|Atheros 5007EG
+
|Does not work yet. Comes with ASUS EeePC 1000 HG.
+
|No
+
|No
+
|-
+
|PCI-E Mini (Notebook)
+
|b/g
+
|Bevo 4311
+
|Broadcom
+
|4311
+
|Comes as an option in older HP Notebooks, can be found online. Recognized out of the box as an Airport card with 10.5-10.6.2 (last rev as of edit date)
+
|Yes
+
|Yes
+
|-
+
|PCI-E Mini (Notebook)
+
|b/g
+
|
+
|Intel
+
|3945
+
|[http://projectcamphor.mercurysquad.com/ Project Camphor]
+
|Yes
+
|?
+
|-
+
|PCI-E Mini (Notebook)
+
|b/g
+
|
+
|Intel
+
|2100, 2200, 2915
+
|[http://code.google.com/p/iwidarwin/ iwiDarwin]
+
|Yes
+
|?
+
|-
+
|USB
+
|b/g/n
+
|WG111v3
+
|Netgear
+
|Realtek
+
|Copy Netgear-Wlan-Launcher in /Programs/ and the kext in System/Library/Extensions/ [http://uploaded.to/file/eyj2pb]
+
|Yes
+
|Not Tested
+
|-
+
|PCI
+
|b/g
+
|WG311t
+
|Netgear
+
|Atheros 5212
+
|Copy id 168c,13 to AirportAtheros21.kext and then copy atherosfix.kext from [http://netkas.org/ Netkas] to /Extra/Extensions (remember to also include id)
+
|Yes
+
|Yes
+
|-
+
|PCI
+
|b/g/n
+
|WN311B RangeMax Wireless Adapter
+
|Netgear
+
|BCM4321
+
|$49.99 PCI card. Native support with BCM43xxEnabler.sh - Need to re-apply after AirPort updates. 64/32 bit - no sleep issues. Reports as 3rd party.
+
|Yes
+
|Yes
+
|-
+
|PCI
+
|b/g/n
+
|WN311B RangeMax Wireless Adapter
+
|Netgear
+
|BCM4329
+
|PCI Card, same as above but must be a different PCB version as it also ships with the  Broadcom 4329, added "pci14e4,4329" to Broadcom Plist in IO802Family.kext. Detected as Third Party Wireless Card, fully functional including wireless N through standard AirPort utility. Modified Kext in the Extras/Extensions folder of the EFI Partition, with Chameleon RC4.
+
|Yes
+
|Yes
+
|-  
+
|PCI
+
|b/g
+
|TL-WN651G
+
|TP-Link
+
|Atheros
+
|Cheap card (about 15 Euros) on eBay. Works with a little patch (10.6.0 needs no patch): You have to edit the device ID in /System/Library/Extensions/IO80211Family.kext/
+
Contents/Plugins/AirportAtheros21.kext from 168c,21 to 168c,13. Also you have to download AtherosFix.kext (and also edit the string to 168c,13 in AtherosFix.kext) and then install AtherosFix.kext with KextHelper b7
+
|Yes
+
|Yes
+
|-
+
|USB
+
|b/g/n
+
|GXU-301
+
|Opticum
+
|Ralink
+
|Cheap USB Wireless adaptor, Fully Working in 32 and 64 bits mode using MacOSX software v.2.0.1.0 release 12.31.2009 from [http://www.ralinktech.com/]
+
|Yes
+
|Yes
+
|-
+
|PCI-E
+
|b/g/N
+
|PCE-N13
+
|Asus
+
|
+
|
+
|No
+
|No
+
|-
+
|USB
+
|b/g/n
+
|TEW-648UB
+
|Trendnet
+
|RTL8188SU
+
|Fully working with Airlink101 Mac OS X 10.6 drivers for AWLL5077
+
|Yes
+
|Yes
+
|-
+
|USB
+
|b/g/n
+
|RNX-2NX
+
|Rosewill
+
|Ralink 2870+ Ralink 2820
+
|Download drivers for 10.6 and above from [http://www.rosewill.com/products/d_1120/productDetail.htm Rosewill]
+
|Yes
+
|Yes
+
|-
+
|Mini PCI (Notebook)
+
|b/g
+
|BCM4318
+
|Broadcom
+
|BCM4318
+
|Flashed as Apple Airport Extreme. Works Out of Box.
+
|Yes
+
|Yes
+
|-
+
|PCI
+
|B/G
+
|DWL-G510 rev. B
+
|D-Link
+
|Atheros 5005G
+
|Used IO80211.kext from: http://www.insanelymac.com/forum/index.php?showtopic=211284
+
|Yes 
+
|?
+
|-
+
|-
+
|PCI
+
|B/G
+
|DWL-G520
+
|D-Link
+
|Atheros
+
|Used Atheros options on leohazard's 10.6.2 disc (Download link [http://www.megaupload.com/?d=ID0395FU])
+
|Yes 
+
|Yes
+
|-
+
|-
+
|PCI
+
|b/g/n
+
|WMP300N
+
|Linksys
+
|BCM43XNG N
+
|
+
* EK/AU versions have the Atheros chipset, US versions Broadcom. This is for the Broadcom. It won't say on card so probe if unsure.
+
* Works great with patch to plist file.
+
* Got it up and running in 10.6.0. Every update you will have to repatch. how to patch the file - edit the contents of info.plist in AppleAirPortBrcm4311.kext by adding <string>pci14e4,4329</string> between strings ending 4328 & 432b
+
* This can be accomplished rather quickly through terminal, '''copy and paste'''
+
sudo /Applications/TextEdit.app/Contents/MacOS/TextEdit /System/Library/Extensions/IO80211Family.kext/
+
Contents/PlugIns/
+
AppleAirPortBrcm4311.kext/Contents/Info.plist
+
* add the edit and save. run sudo touch /System/Library/Extensions in terminal, restart, go to system preferences/network and you will see your new AirPort card populate in the list of network connections.
+
|Yes
+
|Yes
+
|-
+
|}
+
 
+
===Wired (Ethernet)===
+
{| class="wikitable sortable" width="100%"
+
|-
+
!Interface
+
!Standard
+
!Device
+
!Manufacturer
+
!Notes
+
!Fully Working w/o Patch
+
|-
+
|USB
+
|10/100
+
|[http://store.apple.com/us/product/MB442Z/A USB Ethernet Adapter/PartNr MB442Z/A]
+
|Apple
+
|fully working, no dropouts
+
|yes, but replug issues. Using AppleUSBEthernet.kext from 10.5.8 helped
+
|-
+
|Onboard
+
|10/100/1000
+
|ASUS CROSSHAIR AM2 NVIDIA nForce 590
+
|Asus
+
|Uses nForceLAN kexts that comes by default in Hazard's Snow Leopard distro.
+
|Fully working with "Snow Leopard 10.6.1-10.6.2 Intel AMD made by Hazard"
+
|-
+
|PCI
+
|10/100/1000
+
|TP-Link TG-3269 (RTL8169 Chip)
+
|TP-Link
+
|Fully Working with 64 bit
+
|Fully Working - out of the box, Delete apple8169.kext and RTL1000SL.kext from extension folder
+
|-
+
|Onboard (PCI-E)
+
|10/100/1000
+
|Realtek RTL8168D/8111D
+
|Realtek
+
|Uses RealtekR1000SL.kext
+
|Fully working with Snow Leopard 10.6-10.6.2 (Mobo: Asrock G31M-GS R2.0)
+
|-
+
|PCI
+
|10/100/1000
+
|Trendnet TEG-PCITXR
+
|Trendnet
+
|Fully working 32/64 bit
+
|Fully working out of box
+
|-
+
|}
+
 
+
==Sound Cards==
+
{| class="wikitable sortable" width="100%"
+
|-
+
!Interface
+
!Hardware Name
+
!Manufacturer
+
!Notes
+
!Drivers Used
+
!colspan="2"| 32/64bit working ''with'' patch
+
|-
+
|Firewire
+
|Duafire
+
|ESI
+
|Working out of the box. Using 64bit Snow Leopard.
+
|No
+
|Not tested
+
|-
+
|Firewire
+
|Digi 003R+
+
|Avid(Digidesign)
+
|Working out of the box with Pro Toos 8 LE,Ableion Live 8.21 and Propellerhead Reason 5.
+
|No
+
|Not tested
+
|-
+
|Firewire
+
|FireFace 400
+
|RME
+
|External Professional Firewire 400 Recording Interface/audio device
+
|Drivers [http://www.rme-audio.com]
+
|Yes
+
|Yes
+
|-
+
|Firewire
+
|828 MK3
+
|MOTU
+
|28 I/O Firewire interface.
+
|Everything works as expected out of the box with the standard MOTU drivers [http://www.motu.com]
+
|Yes
+
|Not Tested
+
|-
+
|USB
+
|U-Control UCA-222
+
|Behringer
+
|
+
|No drivers required automatically detected and functions in OSX 10.0.2, software available for MAC on supplied CD.
+
|Yes
+
|Yes
+
|-
+
|USB
+
|SB Connect (SB 0270)
+
|Creative
+
|product page [http://uk.europe.creative.com/products/product.asp?category=1&subcategory=207&product=15911]
+
|No Drivers required, Everything Works- SnowOSX10.6.2  Universal used |Yes
+
|Not Tested
+
|-
+
|USB
+
|X-Fi Go!
+
|Creative
+
|Internal 1gb Memory Also Works OOB
+
|No Drivers required, Everything Works OOB, Mic-IN and Wave-out
+
|Yes
+
|Not Tested
+
|-
+
|PCI
+
| CMI8738 chipset
+
|CMI
+
|Using only 2 speaker output but i think that surround works also, I think any card with CMI8738 chip will work
+
|Drivers for 10.6 found here works in 64 bit [http://www.insanelymac.com/forum/index.php?showtopic=1656&pid=1323927&mode=threaded&start=100#entry1323927]
+
|Yes
+
|Not Tested
+
|-
+
|PCI
+
| [http://www.esi-audio.com/products/julia/ ESI [email protected]]
+
|ESI
+
|4in/4out PCI audio interface with swappable I/O socket.
+
Note: official ESI drivers compiled for PowerPC only! Don't try to use it on OSX86. Use these drivers instead: [http://www.audio-evolution.com/drivers/]
+
|Drivers for 10.5 and 10.6 [http://www.wwwcheapuggs.com/ cheap uggs] [http://www.audio-evolution.com/drivers/]
+
|Yes
+
|Not Tested
+
|-
+
|Firewire
+
|Saffire Liquid 56
+
|Focusrite
+
|Using a Lacie Firewire 400 PCI card by SISMO(Recommended by Focusrite)
+
|No Firewire drivers required just install the Saffire MixControl software and it just works!
+
|Yes
+
|Yes
+
|-
+
|USB
+
|Audio 8 DJ
+
|Native Instruments
+
|
+
|Regular OSX drivers by the Manufacturer
+
|Yes
+
|Yes
+
|}
+
 
+
== Other Accessories ==
+
 
+
{| class="wikitable" width="100%"
+
|-
+
!Type of Accessory
+
!Item Description
+
!Manufacturer
+
!Notes
+
!Fully Working w/o Patch
+
|-
+
|Webcam USB
+
|HP Deluxe DT Webcam (KQ246AA)
+
|HP
+
|Works great! No drivers needed! out of the box, test on 10.6.2
+
|Yes
+
|-
+
|Webcam USB
+
|A4Tech PK-635
+
|A4Tech
+
|Used macam version 0.9.2, 4-5 fps only, tested on 10.6/10.6.2
+
|No
+
|-
+
|USB Bluetooth Dongle
+
|DeLock Bluetooth USB Adapter V2.1+EDR)
+
|Atheros Bluetooth ChipSet
+
|Works Out of the Box with MagicMouse! 10.6.2
+
|Yes
+
|-
+
|USB Bluetooth Dongle
+
|KeySonic KSR-10BT, small and cheap
+
| Keysonic
+
|works Out of the Box with MagicMouse! 10.6.2
+
|Yes
+
|-
+
|USB Bluetooth Dongle
+
|CBT200NANO
+
|Conceptronic
+
|works Out of the Box with MagicMouse! 10.6.2
+
|Yes
+
|-
+
|USB Bluetooth Dongle
+
|IOGear Bluetooth 2.1 USB Micro Adapter
+
|Broadcom ChipSet
+
|Works Out of the Box with MagicMouse on 10.6.2
+
|Yes
+
|-
+
|USB Bluetooth Dongle
+
|USBBT100
+
|Linksys
+
|Tested + working with Mighty Mouse (A1197) and Morotola H550 headset|Yes
+
|-
+
|Firewire Card
+
|SYBA PCI to Firewire 1394a 3+1 ports controller card Model SD-NEC-4F
+
|Syba
+
|Works out of the box perfectly
+
|Yes
+
|-
+
|USB Modem
+
|MA034
+
|Apple
+
|
+
|Yes
+
|-
+
|USB Bluetooth Dongle
+
|JABRA A320s Bluethooth Stereo USB Adapter Wireless
+
|JABRA
+
|Works OOB without modifications
+
|Yes
+
|-
+
|USB Bluetooth Dongle
+
|Enter Multimedia
+
|Enter
+
|Works out of the box without modifications
+
|Yes
+
|-
+
|Webcam USB
+
|Logitech Webcam C120
+
|Logitech
+
|Works out of the box without modifications
+
|Yes
+
|-
+
|Webcam Software
+
|Macam
+
|?
+
|[http://webcam-osx.sourceforge.net/ Macam plugin works].
+
|Yes
+
|-
+
|Webcam
+
|Quick Cam E3500
+
|Logitech
+
|UVC (pre-installed on osx)
+
|
+
|Yes
+
|-
+
|Audio Interface
+
|Firewire 1418
+
|M-Audio
+
|tested on 10.5.6 & 7 works with driver of the company
+
|yes
+
|-
+
 
|}
 
|}

Revision as of 22:33, 20 April 2012

MSI

Hardware Name Chipset Notes EFI/kernel working Fully Working w/o Patch 32/64bit working with patches|-
P35 NEO-F P35 ICH9

Install Vanilla from DVD or USB-HD

  • Of course you have to your Bios to prevent from Kernelpanics(link removed not valid)
  • Bootloader: PC EFI v10.6
  • Use this package of Kexts
  • SATA fully working with IOATAFamily in Package
  • IDE fully working with AppleVIAATA in Package
  • LAN works OOTB
  • Sound needs VoodooHDA
  • Sleep seems to be the only thing not to work - yet!
Yes 64bit (Vanilla) No Tick.png Tick.png
945P Neo3 (MS-7236) i945P, i82801 (ICH7/R) Installation method: installed using SnowOSX Universal v3.6.
  • CPU: Core 2 Duo E7300 (works as Core 2 Solo)
  • SATA: Works
  • IDE: Untested
  • LAN: Works (RTL8110)
  • Audio: not working (ALC850) needs .kext ?
  • USB: Works
  • Shutdown/Restart: Working
  • Memory: Works, Kingston 4x1Gb DDR2 800 MHz
PC_EFI 10.5 with DSDT, Chameleon 2 RC4 unknown
K9N Diamond Nforce 590 SLI Installation method: Load with REBEL EFI and used disk: Snow_Leopard_10.6.1-10.6.2_SSE2_SSE3_Intel_AMD_by_Hazard
  • CPU: AMD 64bit 4800+
  • SATA: Works 100%
  • IDE: It boots from my IDE 160 GB 7200 RPM
  • LAN: Works, no kext selected on install
  • Audio: not working: onboard audigy SE. Works: PCI-card SoundBlaster 5.1
  • USB: Works 1.1 and 2.0
  • Shutdown/Restart: Works 100%
  • Memory: GEIL 2x2Gb DDR2 1300 MHz
PC_EFI 10.5 with DSDT, Chameleon 2 RC4 Yes Tick.png Tick.png
K9AGM2 (-FIH) AMD690V Installation method: Load with ANV 10-2-0 and used disk: Snow_Leopard_10.6.1-10.6.2_SSE2_SSE3_Intel_AMD_by_Hazard
  • CPU: AMD 64bit 5200+
  • SATA: Works 100%
  • LAN: Works, add realtek R1000
  • Audio: Work: add azalia and azalia ADI 1981
  • USB: Works 1.1 and 2.0
  • Shutdown/Restart: Works 100%
  • Memory: 2x2Gb DDR2 1300 MHz
PC_EFI 10.5 with DSDT, Chameleon 2 RC4 unknown
K9A2 CF ATI 790X/SB600 Installation method: Installed from working iDeneb 10.5.7 and used disk: Snow Leopard Client Server 10 6 2 SSE2/SSE3 Intel AMD by Hazard, does not boot from CD!
  • CPU: AMD Athlon II X2 240 2,8GHz
  • RAM: 2x 1GB Kingston ValueRAM DDR2-800
  • SATA: Works, but you have to update the BIOS to latest version and set it to AHCI in BIOS.
  • IDE: Works with dvd drive, hard drive not tested. Select AppleATIATA.kext.
  • LAN: Realtek RTL8111 works out of the box.
  • Audio: Realtek ALC888 works with AppleAzaliaAudio.kext. [1]
  • USB: "Works", mixed 1.1 and 2.0 speeds. Has serious issues with Aluminum Apple Keyboard. I'm using a PCI NEC USB card.
  • Shutdown/Restart/Sleep: Works, sleep does not work.
PC_EFI 10.5, Chameleon 2 RC3 unknown
P7N (MS-7380) nForce 750i SLI SPP/MCP51 Installation method: Installed using Hazard's Snow Leopard 10.6->10.6.2 Intel/AMD Distro using "cpus=1". Then rebooted with my own DSDT using "DSDT=/DSDT.aml arch=i386". System running 64bit
  • Case: nVidia CoolMaster (open front and back with Multi-fans to keep cool)
  • CPU: Intel Core 2 Duo E7500 2.93Ghz (MMX/SSE(1,2,3,3S,4.1), EM64T, VT-x)
  • BIOS: needs correct settings see here [2]
  • RAM: OCZ 2x 2Gb (Paired) PC2-6400 (400Mhz) DDR3
  • SATA: Works (HDD 500Gb partitioned Win7/OSX)
  • IDE: Works (LiteOn DVD-RW DL) - AppleNForceATA (AnV and slash)
  • LAN: nForceEthernet
  • WIFI: WPN311 Dlink PCI (used a patched IO82Networking.kext)
  • Audio: AppleAzillaHDA and VoodooHDA for working front panel
  • USB: All work 2.0
  • Firewire: works
  • Keyboard & Mouse: Logitec USB
  • Shutdown/Restart/Sleep: Only sleep sometimes works
Yes/64bit Vanilla Yes Tick.png Tick.png
K9A2 Platinum AMD 790FX Chipset (SB600) Installation method:
  • Started with 10.5.7 > 10.6.0 [3] >10.6.2 Hazard
  • Installed 10.6.2 by Hazard on a separate drive.

Issues:

1. Some extensions did not install during setup. Reinstall manually [4]

2. Error in terminal when using sudo command: sudo: /etc/sudoers is owned by gid 80, should be 0

  • This is a symptom of Admin account missing / Only standard user account's available:
    • Boot into single user mode
    • Type (after typing the commands to check disk and mount.):

rm /var/db/.AppleSetupDone

  • Reboot - Now your system will startup at the Setup Assistant Screen so you can establish an admin account.

Next:

  • Repair permissions using Disk Utility. While repairing you might..

Get this error while attempting to repair permissions: Error message: No installer package can be found for this disk

  • Best solution is to just update to 10.6.3 (trust me, it's too much trouble to solve). Once upgraded, this problem disappears.
No. Works with Blacknight 10.2 Kernel and Modbin. I used Modbin in the end. Use these selections in Hazard's install:
  • Chameleon RC3, Bootx86, Graphics Enabler, GUI
  • AMD_Patch
  • ATIATA
  • Realtek_R1000
  • ElliotForceLegacyRTC, IOATAFamily_SATA_FIX
  • ABOUT_This_Mac Fix, Bonjour64, DSDT_Patcher_GUI, EVOREBoot
  • Orange_IconFix, IOPCIFamilyFix, UUID, SwitchResX, VoodooHDA_PrefPAnt
  • Lots of applications for 10.6.2 [5]
K9N Neo v2 Nforce 520 Installation method: Load Snow_Leopard_10.6.1-10.6.2_SSE2_SSE3_Intel_AMD_by_Hazard
  • CPU: AMD 64bit 4000+
  • SATA: Works 100%
  • GRAPHIC: GeForce 8600 GT DDR3
  • IDE: It boots from my IDE 80 GB 7200 RPM
  • LAN: Works, no kext selected on install
  • Audio: working with AppleHDA.kext - PCI-card M-Audio 2496 working with ENvy24 ,MIDI not working
  • USB: Works 1.1 and 2.0
  • Shutdown/Restart: Works 100%
  • Memory: Kingston 2x2Gb DDR2 667 MHz
PC_EFI 10.5 with DSDT, Chameleon 2 RC2 , Legacy_kernel 10.2 Use these selections in Hazard's install:
  • 10.2 Combo Update
  • Legacy_kernel 10.2
  • Graphic Enabler
  • Legacy Apple RTC
  • IOATAfamily_fix
  • IOATAupstream user client disabler
  • UUID
  • AMD
  • Roseta (Optional)
  • If you want to update to 10.6.6 download from Apple's suite 10.6.6 combo update. Run the update, after update is finished DO NOT RESTART COMPYTER!!!Download legacy_kernel 10.5 install it and than hit restart in update window!
  • Boot it with -v to check if there is any error
  • If u want to boot it in 32bit mode add arch=i386 to boot.plist
 <key>Kernel Flags</key>
 <string>arch=i386</string>
  • Dont run in Cameleon boot loader arch=i386 command you will still runing 64bit system because your Kernel Flag will be
  • <string>-force64 arch=i386</string>
Tick.png Tick.png
Powered by MediaWiki © 2021 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki   |   Privacy policy   |   About OSx86   |   Disclaimers