HCL 10.6.6/Portables

From OSx86
(Difference between revisions)
Jump to: navigation, search
(Lenovo)
(K2MT6j https://writemyessayforme.web.fc2.com/#writemyessay)
 
(34 intermediate revisions by 16 users not shown)
Line 1: Line 1:
{{Portables|10.6.6}}
+
K2MT6j https://writemyessayforme.web.fc2.com/#writemyessay
 
+
==ACER==
+
===Aspire 3690===
+
everything but wifi works
+
*Current OS X Version: 10.6.6 by hazard
+
*Desktop/Laptop: Laptop
+
*Manufacture: Acer
+
*Model: Acer Aspire 3690 15"
+
*processor: intel celeron M 430 @1.73 GHz Yonah
+
2GB ram,60GB HDD intel gma 950
+
*Install method summery
+
-download 10.6.6i by hazard and burn to disc,patch with ppf patch, also download empire efi.
+
-insert the empire efi,boot from DVD drive, after efi loads replace with hazard disc and hit f5
+
-type -v and hit enter on the hazard disk
+
-follow instructions.
+
chameleon RC4,
+
voodoo HDA 2.6.1,
+
broadcom,
+
WLAN not supported,
+
intel gma 950,
+
usb fix,
+
all laptop,
+
dsdt and fakesmc,
+
 
+
bluenext usb bluetooth adapter works
+
===============================
+
===Aspire 4710z===
+
{{QE|Y}}
+
* Install Method: Snow Leopard 10.6.1-10.6.2 SSE2/SSE3 by Hazard + MacOSX Combo Update 10.6.6 from Apple
+
* Processor: Intel T2130  1.86GHZ Pentium Dual Core 1MB L2 Cache
+
* Ram: 1.5GB  DDR2 667, (reports as DDR3 800)
+
* Audio+Mic: (ALC268)Fully Functional (Patched AppleHDA Kext)
+
* LAN: Not Working
+
* WLAN: Not Working
+
* Graphics Controller: Intel GMA950[8086:27a2] with QE/CI enabled
+
* Webcam: Acer Crystal Eye (Tested with iChat,Skype & Photo Bhooth)
+
 
+
===Aspire 6935===
+
{{QE|Y}}
+
*normaly updated from 10.6.4 without problems
+
 
+
===Aspire 5315===
+
*Current OS X Version: 10.6.6
+
*Desktop/Laptop : Laptop
+
*Manufacturer: Acer
+
*Model: Aspire 5315 201G12Mi
+
*Install Methods summary:
+
 
+
Used SnowLeo Mac OSX86 for Intel/AMD 32/64 Bit Install DVD (GPT/MBR) + Combo Update 10.6.6 + USB 10.6.4 [http://rapidshare.com/files/448753656/IOUSB_Family_from_10.6.4.zip] (use kextinstaller) + Legacy_kernel 10.6, mod com.apple.Boot.plist (Kernel Flags -force64 arch=i386, boot 64-bit mode)
+
 
+
*BIOS Version: 1.43
+
*BIOS setup options: Sata set to AHCI Mode
+
*Processor Model: Intel Celeron M550 (2.0 Ggz) Update Pentium Dual Core T2370 (1.73 Ggz)
+
*Audio: Realtek High Definition Audio (10EC:0268), works perfectly with ALC268 by Skvo    (additional note---> http://www.kexts.com/view/1027-alc272.html    also worked for me)
+
*LAN: Broadcom Netlink Fast Ethernet (14E4:1713), Not working, couldnt find driver.
+
*WLAN: Atheros AR5007EG Wireless Network Adapter (168C:001C), Not working, Not Supported. (replaced to BCM4390 Work out of box)
+
*Modem: HDAudio Soft data fax Modem with smart cp (14F1:2C06), Untested as I dont need it.
+
*SATA & IDE: SATA worked out of the box. IDE untested.
+
*Partitoned as GUID
+
*Graphics: Mobile Intel 965 Express Chipset Family X3100 144mb (8086:2A02) Working perfectly
+
*Quartz Extreme : Supported, all resolutions available.
+
*Other Accessories (USB/FIREWIRE) : Yes
+
 
+
===TravelMate 7730===
+
{{QE|N}}
+
 
+
Used [http://tonymacx86.blogspot.com/2010/04/iboot-multibeast-install-mac-os-x-on.html Tonymacx86's iBoot method] for installing OS X 10.6.2, then updated to 10.6.6 via Combo Update. But before starting the installation the BIOS has to be updated to at least [http://global-download.acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_3231_A_A.zip?acerid=633987898633495323&Step1=Notebook&Step2=TravelMate&Step3=TravelMate_7530&OS=V10&LC=de&BC=Acer&SC=EMEA_8 v3132 (3.1MB)] on a working Windows installation.
+
 
+
{| class="wikitable" width="100%"
+
!Parts
+
!Device
+
!Working
+
!Notes
+
|-
+
|'''Processor'''
+
|Intel Core 2 Duo 2.0GHz
+
|Yes
+
|Native Support OTB
+
|-
+
|'''SATA'''
+
|Hard Disk/DVD-RW
+
|Yes
+
|Native Support OTB
+
|-
+
|'''Graphics'''
+
|Intel GMA 4500HD
+
|Yes
+
|Patching the Bootloader is required for the correct resolution. No QE/Cl, external VGA, DVI, HDMI supported - See [http://www.insanelymac.com/forum/index.php?showtopic=221394 this] for further explanation
+
|-
+
|'''Audio'''
+
|Realtek ALC269
+
|Yes
+
|VoodooHDA
+
Output: internal Speakers, external 3,5mm connector
+
Input: internal Mic (if there is one), both external 3,5mm connectors (pink/blue)
+
|-
+
|'''Ethernet'''
+
|Broadcom BCM5764M
+
|No
+
|Found many Kexts an instructions on various sites, but nothing worked for me... If you find a way to enable it, I would be nice if you explain the way you figured out.
+
|-
+
|'''Wireless'''
+
|Intel WiFi Link 5100AGN
+
|No
+
|Has to be replaced with another supported mPCIe WiFi card!
+
|-
+
|'''Bluetooth'''
+
|Some kind of Bradcom device
+
|Yes
+
|Native Support OTB, but of course Bluetooth has to be put on via it's extra button
+
|-
+
|'''USB'''
+
|
+
|Yes
+
|Native Support OTB
+
|-
+
|'''Card Reader'''
+
|JMicron
+
|No
+
|Read that this device should be supported but I wasn't able to install it because VoodooSDHC wasn't loaded during boot and IOSDHCBlockDevice lead to Kernel Panics during boot.
+
|-
+
|'''Web Cam'''
+
|Acer Crystal Cam
+
|Yes
+
|Works after installing [http://www.ecamm.com/mac/iusbcam/ iUSBCam]
+
|-
+
|'''Trackpad'''
+
|Synaptics Touchpad
+
|Yes
+
|VoodooPS2Controller, VoodooPS2Trackpad
+
even vertical and horizontal scrolling with two fingers all over the Trackpad is supported
+
|-
+
|'''Keyboard'''
+
|PS2 Keyboard
+
|Yes
+
|VoodooPS2Controller
+
even Sound-Fn, Trackpad-Fn, Sleep-Fn and Display-Fn buttons are supported, unfortunately other extra buttons aren't supported
+
|-
+
|'''Sleep'''
+
|
+
|No
+
|Isn't working, when pressing the sleep button or clicking sleep the mouse disappears for a short time, returns again and nothing happens
+
|-
+
|'''Power Mgmt.'''
+
|
+
|Yes
+
|VoodooPowerMini,
+
is required to remove Kernel Panics during first boot after a longer break
+
|-
+
|'''Battery'''
+
|Integrated
+
|Yes
+
|Voodoobatterry
+
|-
+
|}
+
 
+
==ASUS==
+
===G1S and G2S===
+
{{QE|Y}}
+
{| class="wikitable" width="100%"
+
!Parts
+
!Device
+
!Working
+
!Notes
+
|-
+
|'''Processor'''
+
|Intel Core 2 duo 2.2GHz
+
|Yes
+
|Native support
+
|-
+
|'''SATA'''
+
|Hard Disk/DVD-RW
+
|Yes
+
|Native support
+
|-
+
|'''Graphics'''
+
|nVidia GeForce 8600M GT
+
|Yes
+
|Put '''GraphicsEnabler=Yes PciRoot=Yes''' at the boot prompt or into the comp.apple.Boot.plist . HDMI output will be tested this week with my Denon AV Amplifier connected between my laptop and my LCD TV
+
|-
+
|'''Audio'''
+
|Realtek ALC882
+
|Yes
+
|VoodooHDA 2.72 
+
|-
+
|'''Wireless'''
+
|Atheros WiFi 4965AGN
+
|NO
+
|
+
|-
+
|'''USB'''
+
|
+
|Yes
+
|Out the Box but no sleep.  Needs DSDT mods for sleep.
+
|-
+
|'''Ethernet'''
+
|Atheros L1 Ethernet
+
|Yes
+
|Kext needed
+
|-
+
|'''Battery'''
+
|Integrated
+
|Yes
+
|Voodoobatterry kext
+
|-
+
|'''Web Camera'''
+
|
+
|??
+
|Not tested yet
+
|-
+
|-
+
|'''eSata'''
+
|Jmicron 36X
+
|Yes
+
|Kext needed
+
|-
+
|-
+
|'''Card Reader'''
+
|
+
|Yes
+
| VoodooSDHC kext
+
|-
+
|}
+
'''Installation process :'''
+
 
+
Boot with the lastest nawcom bootcd. Then insert the retail 10.6 Snow leopard DVD. Type F5 and select OSX install DVD.
+
Finish the Apple installation process.
+
 
+
When you get the hand on the MacOS, install 10.6.6 combo update but not reboot. Install USBrollback with multibeast and add the others kext needed
+
 
+
You will get a full working 64 bits SL now !
+
 
+
It also works with windows 7 64 bits as dual boot but you'll need to repair windows boot file through the standard process and install EasyBCD 2.1 adding Mac MBR boot line into boot options
+
 
+
 
+
 
+
===G53JW===
+
{{QE|Y}}
+
{| class="wikitable" width="100%"
+
!Parts
+
!Device
+
!Working
+
!Notes
+
|-
+
|'''Processor'''
+
|Intel Core i7 740QM 1.73GHz
+
|Yes
+
|OOB; best to boot with `cpus=8 busratio=13`. No Speedstep?
+
|-
+
|'''SATA'''
+
|Hard Disk/DVD-RW
+
|Yes
+
|OOB
+
|-
+
|'''Graphics'''
+
|nVidia GeForce GTX 460M 1.5GB VRAM
+
|Yes
+
|OOB 10.6.3; best to use recent Chameleon with `GraphicsEnabler=yes` boot option. Update drivers with MacPro 3,1 definition or tonyx86 drivers.
+
|-
+
|'''Audio'''
+
|On-board
+
|Yes
+
|VoodooHDA 2.7.2, then edit kext's Info.plist [http://pastebin.com/2FRdyrpq] also set vectorize to <true/> in the Info.plist
+
|-
+
|'''Wireless'''
+
|Atheros WiFi AR9285
+
|Yes
+
| Use AR9285 DSDT Fix [http://www.insanelymac.com/forum/lofiversion/index.php/t234570.html]
+
|-
+
|'''USB'''
+
|
+
|Yes
+
|OOB
+
|-
+
|'''Ethernet'''
+
|RTL8111/8168B
+
|Yes
+
|RealtekRTL81xx.kext (included in Nawcom)
+
|-
+
|'''Battery'''
+
|Integrated
+
|Yes
+
|Use OOB AppleIntelCPUPowerManagement (no NullCPU, etc) and VoodooBattery.
+
|-
+
|'''Web Camera'''
+
|Chicony USB2.0 2.0M UVC WebCam (PID b1bb, VID 04f2)
+
|Yes
+
|Use CamTwist (Google it) for it to work with iChat, Photobooth, etc.
+
|
+
|-
+
|'''Card Reader'''
+
|
+
|No
+
| Not attempted
+
|-
+
|}
+
 
+
 
+
'''Additional Notes:'''
+
 
+
* OS X 10.6.6 update-ready, installed using Nawcom ModCD (most recent as of 2/15/2011) [http://blog.nawcom.com/?p=446] and 10.6.3 Retail Disc
+
* mach_kernel works properly
+
* lspci (for reference): [http://pastebin.com/uJLK4fqQ]
+
* Recommended: at minimum, define RAM speed, Max CPU speed via smbios.plist (see MacPro 3,1 as an example)
+
* No Speedstep, etc. Runs full speed, runs through battery incredibly fast.
+
* Can't seem to get Sleep working properly. Update 10.14.11, use edits from DSDT here: [http://www.insanelymac.com/forum/index.php?showtopic=251017#]
+
* Occasionally, Touchpad is unavailable at boot. Add the following to /etc/rc.common:
+
* For AR9285 dsdt edit WLAN is the device to be changed to ARPT
+
 
+
''/sbin/kextload /Extra/Extensions/ApplePS2Controller.kext/Contents/PlugIns/ApplePS2Mouse.kext -d /Extra/Extensions/ApplePS2Controller.kext
+
''
+
 
+
* Works properly with 8GB RAM.
+
* CUDA and Nvidia Quadro drivers[http://www.nvidia.com/object/quadro-macosx-256.01.00f03-driver.html] can be installed properly only with MacPro 3,1 definition.
+
* MacPro 3,1 smbios.plist: [http://pastebin.com/yTmUY7dm]
+
 
+
===UL80JT===
+
{{QE|Y}}
+
{| class="wikitable" width="100%"
+
!Parts
+
!Device
+
!Working
+
!Notes
+
|-
+
|'''Processor'''
+
|Intel Core i3 UM 1.2 O.C. to 1.6GHz
+
|Yes
+
|Out the Box
+
|-
+
|'''SATA'''
+
|Hard Disk/DVD-RW
+
|Yes
+
|Out the Box
+
|-
+
|'''Graphics'''
+
|nVidia GeForce 310M
+
|Yes
+
|Out of box 10.6.4
+
|-
+
|'''Audio'''
+
|HDA ALC269
+
|Yes
+
|VoodooHDA 2.72, then replace the kext with the latest patched VoodooHDA.kext for ALC269 from KEXTS.C*M. (Internal speakers, Internal Mic and Analog I/O all work) 
+
|-
+
|'''Wireless'''
+
|Atheros WiFi 5285AGN
+
|Maybe
+
|Working with G Networks only.  Using Edimax USB Nano WiFi Adapter for N access
+
EW-7811Un.
+
|-
+
|'''USB'''
+
|
+
|Yes
+
|Out the Box but no sleep.  Needs DSDT mods for sleep.
+
|-
+
|'''Ethernet'''
+
|Atheros LC1 Ethernet Kext
+
|Yes
+
|
+
|-
+
|'''Battery'''
+
|Integrated
+
|Yes
+
|AppleACPIBatteryManager
+
|-
+
|'''Web Camera'''
+
|
+
|Yes
+
|Out of box
+
|-
+
|-
+
|'''Card Reader'''
+
|
+
|Yes
+
| OOB
+
|-
+
|}
+
'''Not native kexts:'''
+
Chameleon2 RC5(i386,Generate P & C States, System Type = 2,Ethernet Built-in)
+
Patched ApplePS2 kexts(Meklort 32/64 bit) Installed in S/L/E/ for convenience on -x boot.  Otherwise need to use external keyboard/mouse for safe boot.
+
AtherosL1cEthernet.kext, IONetworkingFamiliy.kext (ver 9.9) installed in E/E
+
 
+
* Install 10.6.X or other SL version (doesnt matter) update to 10.6.6 incrementally, testing after each update
+
* Latest Chameleon version 2RC5.
+
* Full working in 32-bit mode and 64bit works OK.
+
* Native SpeedStep, HPET,LPC,SBus and other full working
+
* Sleep/Lid, Wake, Shutdown, Restart all working with Customized DSDT. [http://www.tonymacx86.com/viewtopic.php?f=34&t=3653&p=70665&hilit=UL80JT#p70665]
+
* Nvidia CUDA installed and working
+
* VGA Out Working (Customized DSDT) Assume HDMI video out works as well but haven't tested it.
+
* Time Machine working.
+
* Win7 Installed on another partition working.  Used a custom ini to install 310M drivers.
+
* Bios Settings - OS Version = Others
+
 
+
===ASUS G51JX - 3D "Republic of Gamers"===
+
{{QE|U}}
+
*STANDARD MODEL
+
* '''Install Method:''' Install using a large USB (8GB) because DVD doesn't work whit kickstart (recognized like HDD). Install using [http://prasys.co.cc/2010/01/empire-efi-v-1-085-is-out Empire EFI boot disc v 1.085 R2] to boot and insert the USB flash then hit F5, then install normally("Experimental Support for Core i5-M , Core i3-M , Core i7M"). 1st boot using Empire. Install network kexts linked to below. Install 10.6.6 Combo Update. Once running 10.6.6, Install bootloader and kexts using 'My Hack'.
+
*'''Graphics enable:''' Yes and <key>PciRoot</key> <string>0</string> graphics
+
* '''Bootloader:''' same use in My Hack
+
* '''Kernel:''' Work only mach_kernel of Efi boot disc, look under extra and the "name.dmg"open it an found the kernel use that and it will work.
+
* '''Kexts:''' Use the default options of My Hack; iats [http://code.google.com/p/iats AtherosL1cEthernet], [http://nawcom.com/osx86/files/10.6/PM/Battery VoodooBattery], slice/AutumnRain's [http://www.projectosx.com/forum/index.php?showtopic=355 VoodooHDA 2.61]  (Voodoo project's [http://forum.voodooprojects.org/index.php/topic,1204.0.html voodoohdahelper] also needed to save settings).
+
*'''Wireless''' [http://rapidshare.com/files/418347268/WIFI_AR9285.zip.html]
+
* Confirmed 1/18/2011
+
 
+
===UL50VT===
+
{{QE|Y}}
+
{| class="wikitable" width="100%"
+
!Parts
+
!Device
+
!Working
+
!Notes
+
|-
+
|'''Processor'''
+
|Intel Core 2 Duo SU7300 1.3Ghz
+
|Yes
+
|OOB
+
|-
+
|'''SATA'''
+
|Hard Disk/DVD-RW
+
|Yes
+
|OOB
+
|-
+
|'''Graphics'''
+
|nVidia GeForce G210M
+
|Yes
+
|To enable graphics do the combo update 10.6.6 and set Compatible (IDE) mode of HDDs in BIOS; GraphicsEnabler=y
+
|-
+
|'''Audio'''
+
|Realtek ALC269
+
|Yes
+
|Patched AppleHDA with DSDT section HDEF
+
|-
+
|'''Wireless'''
+
|Atheros AR9285 802.11b/g Wireless Network Adapter
+
|Yes
+
|Use this kext [http://uploading.com/files/94fm2e33/IO80211Family.kext.zip]
+
|-
+
|'''USB'''
+
|ICH9M Family
+
|Yes
+
|OOB
+
|-
+
|'''Ethernet'''
+
|Atheros AR8131
+
|Yes
+
|Use these kexts [http://www.mediafire.com/?8rzj5xgeckshmah] [http://www.mediafire.com/?zc486dpzls8mn0m]
+
|-
+
|'''Battery'''
+
|Integrated
+
|Not tested
+
|-
+
|'''Web Camera'''
+
|Integrated
+
|Yes
+
|OOB
+
|-
+
|'''Card Reader'''
+
|Integrated
+
|Yes
+
|OOB
+
|-
+
|}
+
'''Installation process :'''
+
 
+
Mac OS X Snow Leopard Retail 10.6; Update to 10.6.6; Switch HDDs mode to Capable (IDE); GraphicsEnabler=y; Install kexts (look up)
+
 
+
==BenQ==
+
=== Joybook X31 ===
+
{{QE|Y}}
+
{| class="wikitable" width="100%"
+
!Parts
+
!Device
+
!Working
+
!Notes
+
|-
+
|'''Processor'''
+
|Intel Core 2 Duo L7500 @ 1.6 GHz
+
|Yes
+
|Works out of the Box
+
|-
+
|'''SATA'''
+
|Hard Disk/DVD-RW
+
|Yes
+
|Works out of the Box
+
|-
+
|'''Graphics'''
+
|nVidia GeForce 8600M GT 256MB
+
|Yes
+
|Works out of the Box with QE/CI (do not use any inject)
+
|-
+
|'''Trackpad'''
+
|Synaptics Touchpad
+
|Yes
+
|Used VoodooPS2Controller.kext (Working fine with two finger scrolling)
+
|-
+
|'''Audio and Mic'''
+
|HDA Onboard
+
|Yes
+
|Works with VoodooHDA.kext
+
|-
+
|'''Wireless'''
+
|Broadcom BCM4311 (Replaced Intel 4965AGN)
+
|Yes
+
|Fully working with Apple Airport
+
|-
+
|'''USB 2.0'''
+
|ICH9M Family
+
|Yes
+
|Works out of the box
+
|-
+
|'''USB 3.0'''
+
|NEC USB 3.0 ExpressCard/34
+
|Yes
+
|Works with MultiBeast patch (NEC USB3.0 chip-based) [http://www.tonymacx86.com/Public/MultiBeast.zip]
+
|-
+
|'''Ethernet'''
+
|Realtek RTL8111
+
|Yes
+
|Works out of the box
+
|-
+
|'''Battery'''
+
|Integrated 6 Cell
+
|Yes
+
|Used VoodooBattery.kext
+
|-
+
|'''ExpressCard'''
+
|ExpressCard /54
+
|Yes
+
|Detect & Work when install USB3.0 patch (by use this [http://www.lacie.com/download/drivers/LaCie%20USB%203.0%20Driver.dmg])
+
|-
+
|'''Bluetooth'''
+
|Integrated Bluetooth 2.1 + EDR
+
|Yes
+
|Works out of the Box
+
|-
+
|'''Web Camera'''
+
|Integrated
+
|Yes
+
|Works (Detect when use USBFix patch)
+
|-
+
|'''Card Reader'''
+
|Integrated
+
|Yes
+
|VoodooSDHC.kext (Only SDHC Cards work, MMC or Memorystick not working)
+
|-
+
|'''Power Management'''
+
|Shutdown/Sleep/Restart
+
|Yes except sleep
+
|when sleep can't wakeup (need to reboot)
+
|-
+
|}
+
 
+
 
+
'''Installation Process'''
+
*Use Hazard SnowLeopard 10.6.6i DVD
+
*DO NOT select ANY inject under NVIDIA NVEnabler topic unless panic.
+
*Use that DVD to reset root password unless you can't access root.
+
 
+
'''Boot Loader:'''
+
Chameleon 2 RC5 with Windows 7 dual boot.
+
 
+
==Clevo==
+
=== M860TU ===
+
{{QE|Y}}
+
{| class="wikitable" width="100%"
+
!Parts
+
!Device
+
!Working
+
!Notes
+
|-
+
|'''Processor'''
+
|Intel Core 2 Duo T9400
+
|Yes
+
|Out the Box
+
|-
+
|'''SATA'''
+
|Hard Disk/DVD-RW
+
|Yes
+
|Out the Box
+
|-
+
|'''Graphics'''
+
|nVidia GeForce 9800M GTS
+
|Yes
+
|Out of box
+
|-
+
|'''Audio'''
+
|HDA ALC662
+
|Yes
+
|Patched AppleHDA
+
|-
+
|'''Wireless'''
+
|Intel WiFi 5100 AGN
+
|No
+
|Not working
+
|-
+
|'''USB'''
+
|ICH9M Family
+
|Yes
+
|Out the Box
+
|-
+
|'''Ethernet'''
+
|Realtek RTL8169
+
|Yes
+
|Out Of Box
+
|-
+
|'''Battery'''
+
|Integrated
+
|Yes
+
|AppleACPIBatteryManager
+
|-
+
|'''FireWire'''
+
|Jmicron FireWire
+
|Yes
+
|Out the Box
+
|-
+
|'''Bluetooth'''
+
|Cambridge Silicon Radio
+
|Yes
+
|Out of box
+
|-
+
|-
+
|'''Web Camera'''
+
|BisonCam, NB Pro
+
|Yes
+
|Out of box
+
|-
+
|-
+
|'''Card Reader'''
+
|Jmicron Card Reader
+
|Mb yes
+
|VoodooSDHC (but i don't use it)
+
|-
+
|}
+
'''Not native kexts:'''
+
AppleACPIBatteryManager,
+
FakeSMC,
+
VoodooPS2. (Install all kexts in S/L/E, not E/E directory)
+
 
+
* Install 10.6.X or other SL version (doesn't matter) update to 10.6.6
+
* Latest Chameleon version.
+
* Use my full working Kit (DSDT, Plist's and other)  [https://www.dropbox.com/s/4dpo8gtzsgy9jqi/Clevo%20M860TU%20Kit.zip Clevo M860TU Kit]
+
* Full working in 64-bit mode
+
* Native SpeedStep, HPET,LPC,SBus and other full works
+
* Geekbench: 4000, xBench: 220
+
* ''Its guid works only with Clevo M860TU with nVidia GeForce 9800GTS. If you have some graphics card, you need to delete or correction GFX0 section in my DSDT or use GraphicsEnabler/NVEnabler''
+
'''Warning:''' ''Update you BIOS to latest for chipset AHCI support.''[http://forum.notebookreview.com/sager-clevo/347629-comprehensive-guide-flashing-m860tu-motherboard-bios.html]
+
 
+
''For other information contact with me, ZAFFE: [email protected]''
+
 
+
'''''update: 19.01.2011'''''
+
 
+
==Dell==
+
 
+
===Vostro 1310===
+
{{QE|Y}}
+
*Install Method: iAtkos S3 V2 + Combo Update 10.6.5 + Combo Update 10.6.6
+
*Processor: Intel Core 2 Duo T8100 (2.1GHz)
+
*Hard Drive: 80GB Seagate SATA
+
*Memory: 2GB - 2 DIMM (DDR2-667)
+
*Graphics: Intel 965 Quartz Extreme Enabled
+
*Audio: Voodoo HDA
+
*CD/DVD Writer: 8X Slot load
+
*Wireless: Broadcom
+
*Wired: Realtek
+
*Battery: VoodooBattery
+
*USB: Works OOB
+
*Firewire: Works OOB
+
*Card Reader: Untested supposed to work with Card Reader selected.
+
*Touchpad/Keyboard: Voodoo PS2
+
Install guide can be found at: [[http://www.insanelymac.com/forum/index.php?showtopic=243626]]
+
 
+
===Vostro 1500===
+
{{QE|Y}}
+
*Install Method: iAtkos S3 V2 10.6.3 + Combo Update 10.6.6
+
*Processor: Intel Core 2 Duo T7600 (1.81GHz)
+
*Hard Drive: 750GB WD Scorpio Blue 5400 SATA
+
*Memory: 2GB - 2 DIMM (DDR2-667)
+
*Graphics: nVidia 8400M GS
+
*Audio: Voodoo HDA
+
*CD/DVD Writer: 8X Slot load
+
*Wireless: Broadcom
+
*Wired: Realtek
+
*Battery: VoodooBattery
+
*USB: Works OOB
+
*Firewire: Works OOB
+
*Card Reader: Untested supposed to work with Card Reader selected.
+
*Touchpad/Keyboard: Voodoo PS2 (failed when updated to 10.6.6)
+
 
+
 
+
=== Latitude E6500 ===
+
{{QE|Y}}
+
{| class="wikitable" width="100%"
+
!Parts
+
!Device
+
!Working
+
!Notes
+
|-
+
|'''Processor'''
+
|Intel Core 2 Duo T9600
+
|Yes with temperature
+
|fakesmc
+
|-
+
|'''SATA'''
+
|Hard Disk/DVD-RW (AHCI,MBR)
+
|Yes
+
|Native
+
|-
+
|'''Graphics'''
+
|nVidia 160M
+
|Yes
+
|Native
+
|-
+
|'''Audio'''
+
|IDT 92xx
+
|Yes
+
|VoodooHDA, disable AppleHDA
+
|-
+
|'''Wireless'''
+
|Dell
+
|Yes
+
|Native
+
|-
+
|'''USB'''
+
|ICH9M Family
+
|Yes
+
|Native
+
|-
+
|'''Ethernet'''
+
|Intel 82567
+
|Yes
+
|Intel82566M
+
|-
+
|'''Battery'''
+
|Integrated 9 Cell
+
|Yes
+
|VoodooBattery
+
|-
+
|'''FireWire'''
+
|Jmicron FireWire
+
|Yes
+
|Native
+
|-
+
|'''Bluetooth'''
+
|Dell 410
+
|Yes
+
|DellBluetoothHCI
+
|-
+
|'''Web Camera'''
+
|Integrated
+
|Yes
+
|Native
+
|-
+
|'''Card Reader'''
+
|Jmicron Card Reader
+
|Yes for 4GB
+
|VoodooSDHC
+
|-
+
|'''DisplayPort&VideoPort'''
+
|Integrated
+
|Yes for HDMI
+
|Native
+
|-
+
|'''Trackpad'''
+
|Built-in
+
|Yes, but Multitouch/Scroll
+
|ApplePS2Controller with Nub
+
|-
+
|'''Power Management'''
+
|Shutdown/Sleep/Restart
+
|Yes, but Sleep
+
|OSXRestart
+
|-
+
|}
+
'''Not working'''
+
*Sleep.
+
**Tried SleepEnabler.kext for 10.6.5 ([http://www.insanelymac.com/forum/index.php?showtopic=196466 InsanelyMac]), kernel panic during boot.
+
**Tried SleepEnabler.kext for 10.6.6 ([http://www.insanelymac.com/forum/index.php?showtopic=242192 InsanelyMac]), won't wake up after sleep.
+
*Built-in trackpad works but multitouch/scroll don't.
+
**Tried VoodooPS2Controller with Nub and prefPane ([http://www.insanelymac.com/forum/index.php?showtopic=175372 InsanelyMac]), trackpad panic like in 10.5.5.
+
 
+
'''Installation'''
+
*Installed 10.6.4 original SL, with Boot-132 ([http://www.insanelymac.com/forum/index.php?showtopic=134430 InsanelyMac]) and modified OSInstall from 10.6.3 ([http://osx86.sojugarden.com/downloads/ myHack]).
+
*Install kexts below with Kext Utility ([http://www.kexts.com/view/447-kext_utility_2.4.2_x86-x64_snow_leopard.html kexts]).
+
*Update 10.6.4->10.6.5, reboot. Update 10.6.5->10.6.6, reboot.
+
*During the update, watch S/L/E and delete AppleHDA.kext after it appeared at once.
+
*Kexts and dsdt work for 10.6.4 and 10.6.5 as well.
+
 
+
'''Boot'''
+
*Chameleon2 RC5 r643 ([http://www.insanelymac.com/forum/index.php?showtopic=231075 InsanelyMac]).
+
*Grub2/Burg2 1.98 Unbuntu 10.04, my generated cfg follows:
+
...
+
menuentry "Mac OS X (32-bit) (on /dev/sda2)" {
+
  insmod hfsplus
+
  #insmod part_gpt
+
  set root='(hd0,2)'
+
  search --no-floppy --fs-uuid --set 05093e816c51a686
+
  insmod vbe
+
  set do_resume=0
+
  if [ /var/vm/sleepimage -nt10 / ]; then
+
    if xnu_resume /var/vm/sleepimage; then
+
      set do_resume=1
+
    fi
+
  fi
+
  if [ $do_resume == 0 ]; then
+
    xnu_uuid 05093e816c51a686 uuid
+
  if [ -f /Extra/DSDT.aml ]; then
+
    acpi -e /Extra/DSDT.aml
+
  fi
+
  xnu_kernel /mach_kernel boot-uuid=${uuid} rd=*uuid DropSSDT=y "Graphics Mode"="1440x900x32"
+
  if [ /System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext -nt /System/Library/Extensions ]; then
+
    xnu_mkext /System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext
+
  else
+
    xnu_kextdir /System/Library/Extensions
+
  fi
+
  if [ /Extra/Extensions.mkext -nt /Extra/Extensions ]; then
+
    xnu_mkext /Extra/Extensions.mkext
+
  else
+
    xnu_kextdir /Extra/Extensions
+
  fi
+
}
+
...
+
menuentry "Chameleon 2 RC5" --class macosx --class os {
+
  insmod hfsplus
+
  #insmod part_gpt
+
  #root (hd0,2)
+
  #search --file --set=root /boot
+
  search --no-floppy --fs-uuid --set=root 05093e816c51a686
+
  multiboot /boot
+
}
+
...
+
 
+
'''Non-native kexts:'''
+
 
+
My kexts and other stuff are attached [http://www.mediafire.com/file/4i7uycitc45v94j/jichi_E6500_10.6.6_i386.tar.bz2 here] (32bit ONLY).
+
I have only got the kexts for x86. Please check the links below for 64-bit kexts yourself.
+
PM me [http://www.insanelymac.com/forum/index.php?showtopic=134430 [email protected]] if the download link dead.
+
 
+
'''''/Extra'''''
+
*dsdt.aml: [http://www.insanelymac.com/forum/index.php?showtopic=194738 [email protected]]
+
*com.apple.Boot.plist: See the attachment above.
+
*Themes: [http://www.insanelymac.com/forum/index.php?showtopic=231075 [email protected]]
+
'''''/Extra/Extensions'''''
+
*AppleACPIPS2Nub.kext: [http://www.insanelymac.com/forum/index.php?showtopic=194738 [email protected]]
+
*ApplePS2Controller.kext: [http://www.insanelymac.com/forum/index.php?showtopic=194738 [email protected]]
+
*fakesmc.kext 2.5: Original [http://www.kexts.com/view/161-fakesmc_version_2.5.html kexts], Info.plist modified ([http://bbs.pcbeta.com/archiver/tid-799385.html Chinese [email protected]])
+
*OSXRestart.kext 1.5c: [http://www.insanelymac.com/forum/index.php?showtopic=199048 InsanelyMac]
+
*VoodooBattery.kext 1.3.3: [http://forum.voodooprojects.org/index.php?topic=1092.0 VoodooProjects]
+
'''''/System/Library/Extensions'''''
+
*DellBluetoothHCI.kext 1.2: [http://www.insanelymac.com/forum/index.php?showtopic=136515 InsanelyMac]
+
*Intel82566M.kext MOD: [http://www.insanelymac.com/forum/index.php?showtopic=194738 [email protected]]
+
*VoodooSDHC.kext: [http://forum.voodooprojects.org/index.php/topic,972.0.html VoodooProjects]
+
*VoodooHDA.kext: [http://www.insanelymac.com/forum/index.php?showtopic=183321 InsanelyMac 0.2.1MOD], with volume works, without prefPane
+
**Alternative: [http://www.projectosx.com/forum/index.php?showtopic=355 ProjectOSX 2.7.1 with prefPane], but volume does not work
+
*REMOVE AppleHDA.kext: AppleHDA conflicts with VoodooHDA, and could cause kernel panic
+
 
+
''For more information and questions, visit [http://www.insanelymac.com/forum/index.php?showtopic=134430 [email protected]].
+
'''''update: 1.7.2011'''''
+
*'''update 2.28.2011:''' Q/E works out of box.
+
*'''update 2.28.2011:''' Try following extension if u are like me experiencing frequent '''OVERHEAT''' with your macb0ok when compiling large projects or watching flash/1080p movies, but without such issue while unplugging the power adapter.
+
'''''/Extra/Extensions'''''
+
*NullCPUPowerManagement.kext: [http://osx86.sojugarden.com/downloads/ [email protected]] The reason is provided in the corresponding descriptions from the link.
+
===Inspiron 1464===
+
{{QE|Y}}
+
*Install Method: Hazard 10.6.6i + Combo Update 10.6.6
+
*Processor: Intel i5 430M (2.26GHz)
+
*Hard Drive: 320GB External USB Hard drive
+
*Memory: 4GB - 2 DIMM (DDR3-1066)
+
*Graphics: ATI Mobility 4330 (512M) with mucha's solution.
+
*Audio: Patched legacyHDA.kext + AppleHDA.kext + DSDT.
+
*Wireless: Broadcom
+
*Wired: Realtek
+
*Battery: VoodooBattery
+
*USB: Works OOB
+
*Card Reader: Untested.
+
*Touchpad/Keyboard: Voodoo PS2
+
*SpeedStep: works with patched DSDT.
+
=== Inspiron 1520 ===
+
{{QE|Y}}
+
{| class="wikitable" width="100%"
+
!Parts
+
!Device
+
!Working
+
!Notes
+
|-
+
|'''Processor'''
+
|Intel Core 2 Duo T7300
+
|Yes
+
|Works out of the Box
+
|-
+
|'''SATA'''
+
|Hard Disk/DVD-RW
+
|Yes
+
|Works out of the Box
+
|-
+
|'''Graphics'''
+
|nVidia GeForce 8600M GT
+
|Yes
+
|Used NVEnabler64.kext (Modded for VGA output)
+
|-
+
|'''Trackpad'''
+
|Synaptics
+
|Yes
+
|Used VoodooPS2Controller.kext (Working fine with two finger scrolling)
+
|-
+
|'''Audio and Mic'''
+
|Sigmatel Stac 92XX HD
+
|Yes
+
|Used VoodooHDA.kext
+
|-
+
|'''Wireless'''
+
|Broadcom BCM4311 (Replaced)
+
|Yes
+
|Fully working
+
|-
+
|'''USB'''
+
|ICH8M Family
+
|Yes
+
|Works IOUSBFamily.kext (v 4.1.7) and IOUSBMassStorageClass.kext (v 2.6.5)
+
|-
+
|'''Ethernet'''
+
|Broadcom BCM440X
+
|Yes
+
|Used BroadcomFix.kext
+
|-
+
|'''Battery'''
+
|Integrated 9 Cell
+
|Yes
+
|Used VoodooBattery.kext
+
|-
+
|'''FireWire'''
+
|Integrated
+
|Yes
+
|Works out of the Box
+
|-
+
|'''Bluetooth'''
+
|Dell 355 Bluetooth Module
+
|Yes
+
|Works out of the Box
+
|-
+
|'''Web Camera'''
+
|Creative Labs Webcam
+
|Yes
+
|Fully Working
+
|-
+
|'''Card Reader'''
+
|Integrated
+
|Yes
+
|VoodooSDHC.kext (Only SDHC Cards work, MMC or Memorystick not working)
+
|-
+
|'''Power Management'''
+
|Shutdown/Sleep/Restart
+
|No
+
|Shutdown/Restart does not work after using NVEnabler64.kext
+
|-
+
|}
+
 
+
 
+
'''Installation Process'''
+
*Installed 10.6.3 + 10.6.6 Combo update.
+
*Installed all the above kexts.
+
*If after installing 10.6.3, webcam and USB shows any problem do a IOUSBFamily rollback using MultiBeast[http://www.tonymacx86.com/Public/MultiBeast.zip].
+
 
+
'''Boot Loader:'''
+
Chameleon 2 RC4 with Windows 7 dual boot.
+
 
+
'''Non-native kexts'''
+
 
+
'''/Extra/Extensions'''
+
*AppleACPIPS2Nub.kext
+
*BroadcomFix.kext
+
*Disabler.kext
+
*fakesmc.kext
+
*NVEnabler64.kext
+
*VoodooBattery.kext
+
*VoodooPowerMini.kext
+
*VoodooPS2Controller.kext
+
*VoodooSDHC.kext
+
 
+
'''/System/Library/Extensions'''
+
*VoodooHDA.kext
+
 
+
You can find all the kexts here [http://www.mediafire.com/?5a6b2tb2g6wnqz7]
+
'''''Updated: 1.8.2011'''''
+
 
+
 
+
===Inspiron 1420===
+
{{QE|Y}}
+
*Install Method: iAtkos S3 V2 + Combo Update 10.6.6
+
You can safely update to 10.6.6 after following the 10.6.4 iAtkos S3 method. Make sure to remove any SleepEnabler.kext before updating
+
 
+
===Inspiron 6400===
+
{{QE|Y}}
+
*'''Install Method''' : Mac Osx Snow Leopard DVD Retail + 10.6.6 (Software update)
+
*'''OsX Version''' : 10.6.6 - Kernel 10.6.0 (32Bits) - Chameleon RC4 Bootloader.
+
*'''CPU''' : Intel Core2Duo T7200 @ 2.06GHz - Dual Core Works with Voodoo TscSync.
+
*'''Graphic card''' : Nvidia 7300 GO -  QE/CI work - Resolution max: 1440x900.
+
*'''RAM''' : 2x2 Gb DDR2 PC5300 @ 667 MHz.
+
*'''Hard disk''' : 500Gb WD SATA.
+
*'''DVD-RW''' : Works out of the box.
+
*'''LAN''' : Broadcom 440X 10/100 - Works out of the box.
+
*'''Firewire''' : RICOH compliant IEEE 1394 @ 400 MHz - Works out of the box.
+
*'''Keyboard/Trackpad (2 Finger Scrolling)/Multimedia front key''' : Works. 2 Finger for secondary click work with trackpad prefpane used in netbooks
+
*'''Sound''' : Sigmatel 9200 : Works.
+
*'''Wireless''' : Dell 1395 b/g - Works out of the Box.
+
*'''Bluetooth''' : Works out of the box.
+
*'''RICOH 3 in 1 Card Reader''' :  Works.
+
*'''Power management''' : Works
+
*'''ShutDown/Reboot''' : Works.
+
*'''Kext used''' : VoodooHDA - VoodooPS2 - VoodooPowerACPI or VoodooPowerMini - VoodooBattery - Sleep enabler - FakeSMC V2 - EvoReboot - AppleIntelPIIXATA - VoodooSDHC.kext - Voodoo TscSync
+
*'''NOT WORKING PARTS''' : Original Intel 3945 a/b/g wireless card changed for Dell 1395a/b/g.
+
 
+
===Inspiron 9400===
+
{{QE|Y}}
+
*'''Install Method''' : iATKOS S3 v2 (10.6.3) + 10.6.6 (Combo update)
+
*'''OsX Version''' : 10.6.6 - Kernel 10.6.0 (32Bits) - Chameleon RC4 Bootloader.
+
*'''CPU''' : Intel Core2Duo T7200 @ 2.06GHz - Dual Core Works with Voodoo TscSync.
+
*'''Graphic card''' : Nvidia GO 7900 GS -  QE/CI work.
+
*'''DVD-RW''' : Works out of the box.
+
*'''LAN''' : Broadcom 440X 10/100 - Works out of the box with BMC440X kext.
+
*'''Firewire''' : RICOH compliant IEEE 1394 @ 400 MHz - Works out of the box.
+
*'''Keyboard/Trackpad (2 Finger Scrolling)/Multimedia front key''' : Works. 2 Finger for secondary click work with trackpad prefpane used in netbooks
+
*'''Sound''' : Sigmatel 9200 : Works.
+
*'''Wireless''' : Intel 3945 a/b/g - Don't works
+
*'''Bluetooth''' : Works out of the box.
+
*'''RICOH 3 in 1 Card Reader''' :  Works.
+
*'''Power management''' : Works
+
*'''ShutDown/Reboot''' : Works.
+
*'''Kext/patch used''' : ChameleonV2RC4, 32BIT-BOOT, GraphicEnabler, Extra Directory, FakeSMC, Disabler, Evoreboot, VoodooHDA, VoodooPS2, VOODOO-PSTATE, VOODOO BATTERY, VOODOO SDHC, VOODOO TSCSYNC, NTFS-3G, BMC440X
+
 
+
For more information, see [http://wackou.free.fr/?page_id=150]
+
 
+
===Mini 10v===
+
{{QE|Y}}
+
*'''Install Method''' : Mac Osx Snow Leopard DVD Retail + 10.6.6 (Combo Update from 10.6.3)
+
*'''OsX Version''' : 10.6.6 - Chameleon 2 NBI Bootloader.
+
*'''CPU''' : Intel® Atom N270 (1.6GHz/533Mhz FSB/512K L2Cache).
+
*'''CPU''' : or Intel® Atom N280 (1.66GHz/533Mhz FSB/512K L2Cache).
+
*'''Graphic card''' : Integrated Intel® 950 (Max Res 1024x600).
+
*'''RAM''' : 1GB,DDR2,533MHZ.
+
*'''Hard disk''' : 160GB SATA HDD 2.5 inch 5400RPM.
+
*'''LAN''' : Realtek RTL8103EL-GR? - Works out of the box.
+
*'''Keyboard/Trackpad''' : Works.
+
*'''Sound''' : Intel High Definition Audio : Works.
+
*'''Wireless''' : Dell 1397 WLAN 802.11g - Works.
+
*'''Card Reader''' :  Works.
+
*'''Power management''' : Works
+
*'''ShutDown/Reboot''' : Works.
+
*'''Kext used''' : All Kexts used are from Netbookinstaller 20100616212351
+
 
+
===Studio XPS 1640===
+
{{QE|Y}}
+
*Install Method: iAtkos S3 V2 10.6.6i
+
*Processor: Intel Core 2 Duo P8600
+
*Hard Drive: 40GB SSD Intel X25-V
+
*Memory: 4GB - 2 DIMM (DDR3 8500)
+
*Graphics: Ati 3650: "GraphicMode"="1920x1080x32" ups from 1024x768 OOB to 1400x1050 but no higher. Panel is 1920x1080 native.
+
*Sound: Not OOB
+
*CD/DVD Writer: OOB 8X Slot load TSST Corp
+
*Wireless: Not OOB. Intel 5100 (won't working)
+
*Wireless: Added kext. Ralink USB AWUS036NUS
+
*Wired: Not OOB. Broadcomm 440x
+
*Battery: Not OOB. Meter not working
+
*USB: Wouldn't reliably reboot until Chameleon's USB Bus Fix (all) was enabled.
+
*Firewire: Gives "Invalid GUID 00000000" errors on boot until Dell XPS 1640 BIOS was updated from A14 to A15. Still gives errors to /var/log/kernel.log.
+
*Card Reader: ?
+
*Touchpad/Keyboard: OOB
+
*Webcam: ?
+
 
+
After Apple Software Update, paniced on boots until pmVersion=21 was used. Add it to Kernel Flags in Boot file (google).
+
 
+
Summary: Really fast! Mostly works well with 10.6.6 install. You'll need to add a different wireless (USB) driver. So far no sound or internal Ethernet. Power management questionable.
+
 
+
===XPS m1210 (MXC062)===
+
{{QE|Y}}
+
*Install Method: iAtkos S3 V2 + Combo Update 10.6.6
+
*Processor: Intel Core 2 Duo T7200 (2.0GHz): alternate 32 bit RTC, VoodooPower, VoodooTSCSync
+
*Hard Drive: 500GB iOmega eGO(USB)
+
*Memory: 4GB - 2 DIMM (DDR2-667)
+
*Graphics: nVidia GF Go 7400: GraphicsEnabler option in bootloader
+
*Sound: Sigmatel 9220: VoodooHDA
+
*CD/DVD Writer: 8X Slot load TSST Corp L632D
+
*Wireless: Intel 4965AG (wont work)
+
*Wireless: Belkin n+ usb (works with rail link drivers after modifying Info.plist)
+
*Wired: Broadcomm 440x
+
*Battery: VoodooBattery
+
*USB: Works OOB
+
*Firewire: Works OOB
+
*Card Reader: works VoodooSDHC
+
*Touchpad/Keyboard: Voodoo PS2
+
*Webcam: Logitech, didnt work, need to find proper kext for it.
+
 
+
Install process:
+
*Boot with iATKOS S3 V2 DVD
+
*Created two partitions in Iomega drive using Disk utility
+
*Formatted first one with Mac OS journled, second partition can be anything of your choice, you can use entire disc for mac also.
+
*Exit Disk Utility
+
*Customize the install, select options given above.
+
*install OS, if successful it will prompt for reboot.
+
*Press F12 on startup for Boot selection mode.
+
*select usb storage.
+
*if everything goes fine you should see the welcome video.
+
*once everything is setup, install combo update.
+
*now you wont be able to boot back in mac, because of new usb drivers.
+
*if you have a working PC(with mac drive) or mac (with teminal), download the 10.6.4 IOUSBFamily.kext and IOUSBMassStorageClass.kext
+
*replace the files in /System/Library/Extentions. (I did in Win XP with Mac drive)
+
*Now boot with the iOmega drive, you should be able to boot back into mac.
+
*run the Kext utility to fix all file permissions.
+
*you may also need to install all the above listed kexts again with Kext utility.
+
 
+
once done you should have most of the things running.
+
 
+
I installed on portable drive because didnt wanted to mess my current windows setup.
+
You can find normal install steps and kexts here: [http://www.insanelymac.com/forum/index.php?showtopic=245381]
+
 
+
===XPS m1710===
+
{{QE|Y}}
+
*'''Install Method''' : Retail 10.6.3 with iBoot + 10.6.6 (Combo update)
+
*'''OsX Version''' : 10.6.6 (32 bit)
+
*'''CPU''' : Intel Core2Duo T7200 @ 2.00GHz - Recognised correctly OOTB but with stuttering. Running single core fixes issue. Using this config until fix found.
+
*'''RAM''' : 4GB Recognised - 3.3GB Useable
+
*'''Hard Drive''' : WDC 320GB 2.5" SATA 
+
*'''Graphic card''' : Nvidia GO 7900 GS (overclocked) -  QE/CI works out of the box.
+
*'''DVD-RW''' : Optiarc DVD+/-RW AD-5540A - Works out of the box.
+
*'''LAN''' : Broadcom 57XX - Untested
+
*'''Firewire''' : Untested, but recognised as up to 400Mb/Sec
+
*'''Keyboard/Trackpad (2 Finger Scrolling)/Multimedia front key''' : Works until 10.6.6 combo update applied. Looking into this.
+
*'''Sound''' : Sigmatel 9200 : Works out of the box.
+
*'''Wireless''' : Broadcom 4318 (NON STANDARD PART IN THE XPS!!)  Works out of the box. Standard 3945 does not.
+
*'''Bluetooth''' : Not fitted.
+
*'''RICOH 3 in 1 Card Reader''' :  Works out of the box.
+
*'''Power management''' : Not working. Will not wake from display sleep.
+
*'''ShutDown/Reboot''' : Works.
+
*'''Kext/patch used''' : None - Yet.
+
 
+
==HP==
+
 
+
===G70 120EA===
+
{{QE|Y}}
+
* Install Method: SnowLeo 10.6.0 - Upgraded to 10.6.2 then to 10.6.6 via combo package
+
* Used NVEnabler, accelerated QE
+
* Installed VoodooPowerMini as laptop was running very hot without (constant max fan)
+
* Installed with Apple PS2 (not 32 bit version), then post install download the Voodoo PS2 0.98 package, extract it and install both the kext for voodoo ps2 and trackpad using kexthelper. Do not install anything else from the package. then remove the AppleACPIPS2Nub.kext and ApplePS2Controller.kext from /sys/lib/ext
+
* Installed BroadcomFix.kext from the Aitkos 10.6.3 S3 DVD to enable wifi (in /Extra/Extensions)
+
* Wired Ethernet works with drivers from official realtek site
+
* Everything works! Webcam, card reader, fully accelerated graphics, shutdown, sleep - only issue is that I cant turn on dragging with the trackpad but scrolling works, tap to click works, multitouch scroll works.
+
 
+
===DV7-3150eq===
+
{{QE|Y}}
+
* Install Method: Boot with Empire EFI, then install SnowLeo 10.6.3, then combo update to 10.6.6
+
*Processor: Intel i5 \kext to recognize i5 from extraspeed.blogspot.com\
+
*Hard Drive: 500GB
+
*Memory: 4GB - 2 DIMM (DDR3-1066)
+
*Graphics: NVIDIA Geforce 320m \QE work, you need kext from extraspeed.blogspot.com\
+
*Audio: Voodoo HDA
+
*CD/DVD DVD DL Combo Drive
+
*Wireless: Atheros \3550 not work\
+
*Wired: Realtek
+
*Battery: VoodooBattery
+
*Touchpad/Keyboard: ApplePS2
+
*Remote control:Work
+
See topic about DV7 - [http://www.insanelymac.com/forum/lofiversion/index.php/t218768.html] to download DV7 Fixes files.
+
Not work - wifi, webcam, print recognizer and sleep.
+
 
+
===DV6000/DV9000===
+
{{QE|Y}}
+
* Install Method: Snow Leopard 10.6.2 SSE2/SSE3 Intel amd dvd(with patch)+osx combo update to 10.6.6 more info bellow
+
*Processor: Intel Core2duo 1,83
+
*Hard Drive: 150GB
+
*Memory: 2GB
+
*Graphics: NVIDIA Geforce 8600m gs full support with chameleon RC5 and graphics enabler set to yes
+
*Audio: Voodoo HDA
+
*CD/DVD DVD DL Combo Drive
+
*Wireless: Intel pro wireless \3945 not work\
+
*Wired: works out of the box
+
*Battery: VoodooBattery, voodooPower
+
*Touchpad/Keyboard: voodooPS2trackpad
+
*Remote control:Work
+
See topic  here
+
Not work - wifi, webcam
+
Not tested - sleep
+
 
+
Note: at install select:-chameleon RC5-VoodooHDA -voodoopower -voodoobattery -voodoops2trackpad - smbiosresolver....after combo update !Remove AppleGraphicsPowerManagement.kextor graphics will be slow!
+
 
+
===MINI 700EL===
+
{{QE|Y}}
+
*Alternative Install method: iATKOS S3 v2 DVD (10.6.3)
+
*In Installer select:
+
**Bootloader: AsereBLN 1.1.9
+
**Bootloader Option: 32-bit, Graphics enabler
+
**Kernel: Atom Kernel modified
+
*Patches
+
**/Extra Directory
+
**FakeSMC
+
**Disabler
+
**RTC
+
**EvoReboot
+
*Drivers
+
**Voodoohda
+
**VoodooPS2
+
**Voodoobattery
+
**Card Reader
+
**TSC Sync
+
**VGA Intel GMA950
+
**EFI String
+
**Natit(32-bit)
+
**Wireless Broadcom
+
**Marvell Yukon 88E8056
+
 
+
TOOLS:
+
*External USB DVD-R
+
*USB Mouse and Keyboard
+
*DSDT Simple Editor
+
*Kext Helper b7
+
*Kext Utility 2.4.x
+
*UnrarX (optional)
+
*VoodooPS2 0.9.8 pkg
+
*Right Kexts for this specific netbook provide here [http://www.insanelymac.com/forum/index.php?showtopic=198559] (GeneralExtensions)
+
 
+
1) After completed the normal installation of Iatkos as above, at first restart you will need USB mouse and keyboard to complete the startup but all works (Wifi, Lan, Bluetooth, Battery, USB Pen, Card Reader, VGA no QE...). Now install DSDT editor, Kext helper, Kext Utility and voodooPS2 package (optional now). Decompress the GeneralExtensions in a folder (/kexts_mini). Backup in a .zip file your original /S/L/E somewhere for future update. Now merge all GeneralExtensions in /S/L/E and/or /E/E BUT it's important that the same kext doesn't have to exist in both folders. You can quite use kext Helper and/or copy/paste. Now launch kext utility (this tool will process both /S/L/E and /E/E and it will update all OSX kext caches). It's take looooong time, don't worry!!!. Execute a restart and check if all is still ok (QE too). At this point you will have just an 10.6.3 working machine. I have tried to resolve the sleep problem usinf DSDT method as explained here [http://www.mymacnetbook.com/2010/03/16/guide-to-installing-mac-os-x-snow-leopard-10-6-2-on-a-hp-mini-1000-or-compaq-mini-700/] following in the "FIX SLEEP:" section the points 8-9-10. For that I have used DSDT Simple Editor then compiled and installed (in /Extra folder). But it didn't helped!!!. Now you are ready to update OSX. I have used COMBO updates.
+
 
+
2) Procedure to update from 10.6.3. to 10.6.4 and up: NEVER RESTART THE NETBOOK AFTER EVERY UPDATE!!! So download the combo and apply it. After that you have to reapply the GeneralExtensions as above. In particular way, pay attention to these: IO80211Family, IOATAFamily, IOUSBFamily, AppleintelGMA950, Appleintelintegrateframebuffer (from GeneralExtensions zip) and IOUSBMASSSTORAGEclass from /S/L/E. All these kexts are overwritten during most combo updates and before restart the HP mini, YOU HAVE to restore them every time (kexthelper and/or copy/paste) followed by a round of kext utility. In other words, after every update be sure to restore all old kexts. I have noticed that after 10.6.4 I have lost part of USB ports functionality, for that reason restore the IOUSBFamily (from GeneralExtensions) and IOUSBMASSSTORAGEclass (from /S/L/E of itakos 10.6.3 installation).
+
 
+
3) For THE TIME REMAINING OF THE BATTERY follow the fix here: [http://www.insanelymac.com/forum/index.php?showtopic=198559]
+
 
+
4) The only thing that doesn't work for me is the sleeper. All the rest works great (2cpu,QE, SD Card reader, USB, Keyboard and touchpad, etc etc etc)
+
 
+
===HP envy 14===
+
{{QE|Y}}
+
*Install Method: Snow Leopard 10.6.6i
+
*Processor: Intel i5 580-M
+
*Hard Drive: 500GB- 7200 RPM
+
*Memory: 4GB - 1 DIMM (DDR3)
+
*Graphics: ATI RADEON 5650 
+
Not working - wifi, webcam, and sleep (it crash, to unfreeze it press again on the power button), i also had trouble with usb (just try USBfix), Graphic Card :(
+
 
+
 
+
How i installed it:
+
*1- Boot leohazard 10.6.6i and partitionate your HDD in 2 (the size doesn't matter as far as it's over 10 GB  and satisfy your ) input this to boot the DVD:
+
                  cpus=1 busratio=20  (don't be surprised if it take time to boot usually can take up to 10min max)
+
*2- One for 10.6.6i  and the other one for Windows*/Mac OSX 10.6.2 (10.6.2 will be use to remove kext that cause 10.6.6 not to boot)
+
*3- Once it's done your ready to install 10.6.6
+
*PACKAGE to select for 10.6.6:
+
    *Chameleon_Boot_Loader: chose RC5 or RC4 (i prefer RC5 but it's up to you i don't think that it really matter)
+
    *Kernel: CHECK IT, it's for legacy
+
    *Drivers
+
          *Graphics: NONE (exotic doesn't work)
+
          *Sound: VoodooHDA_0.2.7.2
+
          *Network:
+
          *Lan: NForceLan & RTL81XX
+
          *WLAN: none of them worked for me
+
    *Laptop: VoodooPS2Trackpad
+
    *Chipset: I selected AHCIPortinjector & ATAPortinjector & JMicronATA
+
    *Sata_Pata: AHCISATAFix
+
    *Patches:
+
                -DSDT_Patcher
+
                -NTFS (if you wish to be able to read/write on NTFS)
+
                -UUID
+
                -USBFix (you might need it, did not installed it and it's not detecting my usb key (FAT32))
+
      (X11 if you plan to use it)
+
 
+
*4- Now reboot and eject 10.6.6i hazard DVD and insert 10.6.2 hazard (boot on it) (in order to delete kext that mess up with graphics)
+
*5- Install 10.6.2 on the empty partition
+
*6-  ONLY INSTALL this (do not select any Bootloader you already have one)
+
        * 10.6.2 update combo
+
        * Kernel: Legacy_Kernel_10.2.0 (others didin't worked for me)
+
        * Graphic_Drivers: NONE
+
        * Audio: voodooHDA and AppleHDA
+
        * Network: I put BCM5787 (ethernet works)
+
        * Laptop_Support: INSTALL VOODOOPS2 (or you will be stuck to do you wish to transfer data menu)
+
        * System_Support:
+
                -CMOS_RESET_Fix: Apple RTC
+
                -SATA_ATA_Fix: AHCI_SATA_Fix
+
                -SMBIOS Resolver
+
                -Fakesmc_v1.0
+
 
+
P.N each single time you want to boot osx 10.6.2 you will have to put (cpus=1 busratio=20 ) anyway you only need 10.6.2 to edit 10.6.6i files (refer to 10.6.2 section for what      works or not)
+
*7- Once everything is setup, boot into 10.6.2 and select(navigate into it) the partition where you installed 10.6.6
+
*8-navigate to System\Library\Extensions and delete this stuff:
+
                            -AppleIntelHD (there might be 4-5 backup them if your not sure)
+
                            -ATI5000Controller.kext (or something like that)
+
                            -Pasting ATI5000Controller.kext (from lion as been report to work, but mine did not (but i let it there))
+
*9-Reboot, and your good to GO
+
*10-Select 10.6.6i, partition, before hiting enter, input this:
+
                              cpus=1 busratio=20 PCIRootUID=1 GraphicsEnable=yes
+
*11-Now if you wish you can wipe 10.6.2 and replace it with windows, or wipe it and extend your 10.6.6 space there so many options
+
*12-VOILA -illegalmexicain-
+
 
+
==OCZ==
+
===OCZDIY17B1-US===
+
{{QE|Y}}
+
*Install Method: iAtkos S3 V2 + Combo Update 10.6.6
+
*Processor: Intel Core 2 Duo (2.1GHz)
+
*Hard Drive: 500GB Seagate SATA
+
*Memory: 4GB - 2 DIMM (DDR3-1066)
+
*Graphics: NVIDIA Geforce 130m GT
+
*Audio: Voodoo HDA
+
*CD/DVD DVD DL Combo Drive
+
*Wireless: Atheros
+
*Wired: Realtek
+
*Battery: VoodooBattery
+
*USB: Works OOB
+
*Bluetooth: Works OOB
+
*Card Reader: Works OOB
+
*Touchpad/Keyboard: Voodoo PS2
+
To install first had to turn off hybrid function for video in BIOS select Nvidia only. During install use Natit enabler to get video working. Web cam works but image is inverted. Otherwise everything works perfect OOB.
+
 
+
==Lenovo==
+
 
+
=== G530 ===
+
{{QE|N}}
+
*'''Install Method'''  : Snow Leopard 10.6.6 SSE2/SSE3 Intel Only by Hazard
+
*'''Boot loader'''  : Chameleon RC5 installed from DVD
+
*'''Processor Model''' : Pentium Dual-Core T3400
+
*'''SATA'''  : Hard Disk / DVD-RW - out of box
+
*'''USB'''  : out of box(i used the usb patch from DVD)
+
*'''Graphics'''  : Intel GMA4500MHD - native resolution, can be changed from Utilities/Bootloader settings (be careful not to choose anything else. Only graphic mode and your resolution), no QE - AppleIntelGMAX3100.kext, AppleIntelGMAX3100FB.kext [http://www.kexts.com/downloads.php?do=file&id=928&act=down&actionhash=guest]
+
*'''Audio'''  : Conexant CX20561 - speaker, headphones, microphone - VoodooHDA-2.7.2.pkg [http://code.google.com/p/voodoohda/downloads/detail?name=VoodooHDA-2.7.2.pkg.zip&can=2&q=]
+
*'''Misc''' : Shutdown and reboot - o.k.
+
*** I installed this in an external hard drive. When boot from it select Mac OSX and type -v and cpus=2. Do not select those from bootloader settings you'll get a panic. I have a level one RTL8188S wireless adapter so i don't use the laptop's wifi.
+
 
+
=== G550 ===
+
{{QE|N}}
+
*'''Install Method''' : Used SnowOSX Universal v3.6, Combo Update 10.6.6, Legacy Kernel 10.6, Kernel Flags arch=i386
+
*'''Processor Model''' : Pentium Dual-Core T4500 @ 2.3GHz
+
*'''SATA''' : Hard Disk / DVD-RW - out of box
+
*'''USB''' : out of box
+
*'''Graphics''' : Intel GMA4500 - native resolution, no QE - AppleIntelGMAX3100.kext, AppleIntelGMAX3100FB.kext [http://www.kexts.com/downloads.php?do=file&id=928&act=down&actionhash=guest]
+
*'''Audio''' : Conexant CX20561 - speaker, headphones, microphone - VoodooHDA-2.7.2.pkg [http://code.google.com/p/voodoohda/downloads/detail?name=VoodooHDA-2.7.2.pkg.zip&can=2&q=]
+
*'''Ethernet''' : Broadcom BCM5906M - BCM5722D.kext [http://www.kexts.com/view/1015-bcm_5906m.html]
+
*'''Wi-Fi''' : Broadcom BCM4312 - bcm43xx_enabler.sh [http://www.kexts.com/downloads.php?do=file&id=556]
+
*'''Web Camera''' : Lenovo EasyCam - out of box
+
*'''Battery''' : VoodooBattery.kext [http://www.kexts.com/downloads.php?do=file&id=226&act=down&actionhash=1301838356-0e4f48b397de94b091c79b1578baf3fd245df9af&multiple=MjI2LVZvb2Rvb0JhdHRlcnkua2V4dC56aXA=]
+
*'''Misc''' : Shutdown and reboot - o.k., sleep - not working.
+
 
+
=== G560 i3 350M ===
+
{{QE|Y}}
+
*'''Install Method''' :    iBoot  + 10.6.6i by Hazard + GRUB Bootloader Ubuntu Linux 10.10
+
*'''CPU:''' Core i3 350M (is not recognized as such but works) 2x2.26GHz
+
*'''SATA Hard Disk:''' (ICH Family) Yes Out of Box
+
*'''SATA DVD+/-RW:''' (ICH Family) Yes Out of Box
+
*'''Graphics:''' NVIDIA GeoForce 310M Yes (works as generic 1360x768) 
+
*'''Audio:''' Yes
+
*'''Wifi:''' Yes
+
*'''USB:''' USB 2.0 Yes Out of Box
+
*'''Bluetooth:'''
+
*'''eSata:'''
+
*'''Ethernet:''' No Realthek  RTL8169E even with Lnx2Mac's "RTL81xx OS X" Driver (no connection)
+
*'''Trackpad:''' Synaptics Touchpad Yes "10.6.5 Synaptics Trackpad Enabler.pkg" - runs only in 32bit mode
+
*'''Webcam:''' yes it works with 10.6.6i Out of Box
+
*'''Sleep:''' No
+
 
+
*first booting method is: load 10.6.6i image from external medium (HD or USB-Ram) with iBoot and following parameters: -x -v busratio=17, Attention: Installation fails if you have 4 GB Ram!
+
*you can use either MBR or GUID
+
*boot loader will be GRUB afterwards (64bit mode of OSX does not boot always)
+
*recommendation: look up how-to on http://g560i3.blogspot.com (available in DE and EN) for retail installation
+
 
+
=== G560 i5 430m ===
+
{{QE|Y}}
+
*'''Install Method''' :    iBoot + retail 10.6.3 + 10.6.6 combo update + Chameleon v2.0-RC5 r650(or above)
+
*'''CPU:''' Core i5 430M
+
*'''SATA Hard Disk:''' (ICH Family) Yes Out of Box
+
*'''SATA DVD+/-RW:''' (ICH Family) Yes Out of Box
+
*'''Graphics:''' NVIDIA GeoForce 310M Yes (works as generic 1360x768) 
+
*'''Audio:''' Yes ([http://www.kexts.com/downloads.php?do=file&id=22])(included in package)
+
*'''Wifi:''' Yes
+
*'''USB:''' USB 2.0 Yes Out of Box
+
*'''Bluetooth:''' yes out of box
+
*'''eSata:'''   untested
+
*'''Ethernet:''' yes ([http://www.kexts.com/downloads.php?do=file&id=1220]) follow instructions.(also included in package)
+
*'''Trackpad:''' Synaptics Touchpad Yes "10.6.5 Synaptics Trackpad Enabler.pkg" - runs only in 32bit mode
+
*'''Webcam:''' yes it works with 10.6.6 Out of Box
+
*'''Sleep:''' No
+
*'''Battery:''' yes (voodoobattery.kext included in package)
+
Download latest iboot, download 10.6.6 combo update.
+
Ensure that you install 10.6.6 combo update when you install Chameleon as 10.6.3 won't boot without iBoot inserted.
+
Package containing all kexts needed for this laptop plus bootloader ([http://www.kexts.com/view/1221-g560_package.html])
+
 
+
===Thinkpad T43===
+
{{QE|U}}
+
*1.86 intel Celeron m single sse 2 processor
+
*2gb ram
+
*250 gb ext harddrive (iportable)
+
*40gb ide 44 pin
+
*pcmcia
+
*usb works
+
*screen- so easy to install
+
 
+
 
+
**This is a rediculous post...Does not tell us how this was installed and whether it was working or not.
+
 
+
=== ThinkPad T60 (Based on Model No. 1952-CTO) ===
+
{{QE|Y}}
+
*'''Install Method''' : Used Snow Leopard 10.6.6i for Intel SSE2/SSE3 By Hazard Install DVD
+
*'''Processor Model''' : Intel Core Duo T2400 @ 1.83GHz 2MB L2 Cache 667MHz FSB
+
*'''System Memory''' : 2GB DDR2 @ 667MHz
+
*'''SATA''' : 80 GB 5400RPM SATA Works
+
*'''Optical Drive''' : DVD/CD-RW Works
+
*'''USB''' : Works OOB
+
*'''Graphics''' : Intel GMA 950 - Just select GMA 950 Under Graphics Driver Options (QE/CI Works)
+
*'''Audio''' : ADI SoundMAX HD Audio Works
+
*'''Ethernet''' : Intel PRO/1000 PL Gigabit Ethernet Works OOB
+
*'''Wi-Fi''' : Intel PRO/Wireless 3945ABG Not Working
+
*'''Bluetooth''': Works OOB
+
*'''Battery''' : VoodooBattery.kext
+
*'''Misc''' : Shutdown and Restart works, sleep not working
+
*'''Installation Notes''': If you notice a kernel panic during DVD Bootup, the kernel panic relates to the Intel ICH7M SATA AHCI Driver, to address that issue enter the BIOS Setup by pressing F1 and select Config and go to Serial ATA and set it to compatibility mode and save and exit. Once done boot again from the DVD and the installation will continue, once done booting from the DVD make sure to select the AHCI Driver by selecting the AHCIFix under PATA_SATA Driver options, once the installation is completed, go back to the BIOS Setup and set the SATA to AHCI Mode and voila!..Enjoy!..=)
+
 
+
=== ThinkPad T60 (Model No. 2007-CTO) ===
+
{{QE|Y}}
+
*'''Install Method''' : Used Snow Leopard 10.6.6i for Intel SSE2/SSE3 By Hazard Install DVD
+
*'''Processor Model''' : Intel Core Duo T2500 @ 2GHz 2MB L2 Cache 667MHz FSB
+
*'''System Memory''' : 1GB DDR2 @ 667MHz
+
*'''SATA''' : 60 GB 5400RPM SATA Works
+
*'''Optical Drive''' : DVD/CD-RW Works
+
*'''USB''' : Works OOB
+
*'''Graphics''' : ATI Radeon X1300 64 MB (QE/CI Works)
+
*'''Audio''' : ADI SoundMAX HD Audio Works
+
*'''Ethernet''' : Intel PRO/1000 PL Gigabit Ethernet Works OOB
+
*'''Wi-Fi''' : Intel PRO/Wireless 3945ABG Not Working
+
*'''Bluetooth''': Works OOB
+
*'''Battery''' : VoodooBattery.kext
+
*'''Misc''' : Shutdown and Restart works, sleep not working
+
*'''PCMCIA''':Seems not working
+
*'''Installation Notes''': Modified ATIRadeonX1000.kext with Vendor ID 0x71491002, Mouse tearing when e.g. playing fullscreen video. Tried iwifi but got KernelPanics after installation.
+
 
+
==Samsung==
+
===R530-Jt02===
+
{{QE|Y}}
+
Installation: A special bootCD Designed for this laptop, made by the Team of hackintosh.nl
+
Install with the CD, and after the installation run "Na installatie".
+
 
+
Processor: Core i3 330m
+
Graphics: 310m Geforce, With Quartz Extreme
+
Sound: Alc269
+
Network: Airport Atheros95x
+
 
+
Not (yet) Working.
+
Lan and HDMI Audio.
+
 
+
You can find more information here:
+
http://www.hackintosh.nl/content/249-systeem-informatie-voor-de-budget-laptop.html
+
And Download the ISO Here:
+
http://www.kexts.com/view/686-bbg_budget_laptop.html
+
 
+
=== RF510-s01 ===
+
{{QE|Y}}
+
*Install/Updates:
+
**Install Method: nawCom's ModCD + Mac OSX 10.6.3 Retail Disk + 10.6.6 Combo update
+
***I highly recommend you rip a .dmg of the disk and mount it on an external or flash drive (8 GB minimum). The install goes way faster this way.
+
**Updates: To update to 10.6.6, just change the kernel to mach_kernel before you reboot.
+
*Main hardware:
+
**Processor: Intel Core i5 460m
+
**Audio: Works, driver(s) automatically selected by ModCD
+
**Wifi: Doesn't work.
+
***Can buy an external card or replace internal. I bought ASUS USB-N10 - Wireless USB Adapter - 802.11b/g/n for about $20. (Driver comes on disk)
+
**Ethernet: Doesn't work
+
**Video: Nvidia 330m-Works out of the Box
+
**SATA: Works with AHCI ***Manually-Enabled*** in BIOS
+
*Secondary Hardware:
+
**Trackpad/KeyBoard: Works, driver(s) are automatically installed by ModCD.
+
**USB 3.0: Works with driver, [http://www.kexts.com/downloads.php?do=file&id=612]
+
***This USB driver can be installed automatically using multibeast.
+
**Webcam: Works out of the box
+
**DVD Reader/RW: Works out of the box
+
**Power Management: Restart/Shutdown work. Sleep does not work. [Sleep enabler breaks mouse and can't wake up from sleep.]
+
*Notes:
+
**64-bit works.
+
**ALT key becomes #command key
+
 
+
*Recommendations:
+
**Extract a DSDT.
+
**Download NTFS-3g for write support on windows drives
+
 
+
*Email: [email protected] with questions/comments
+
 
+
=== R480/R580/R780 ===
+
{{QE|Y}}
+
* Install Method: iBoot + Mac Osx Snow Leopard DVD Retail + 10.6.6 Combo Update + Multibeast 3.0
+
* Chipset: Intel HM55
+
* Processor: Intel Core i5 430m (CA config)
+
* Audio: Realtek HD ALC 269
+
* WIFI: Atheros 9285
+
* LAN: Not supported
+
* Video: GeForce 330m
+
* SATA & IDE: SATA work enabling AHCI in BIOS.
+
Audio work use this:[http://www.kexts.com/view/838-alc_269_10.6.x.html] VoodooHDA and remove AppleHDA. Sleep not work. Webcam works. Bluetooth works. Vga works. WiFi works. Trackpad use VoodooPS2Controller. Battery use Voodoo Battery 1.3.3.Registering error 8gb as 4gb ddr3 1066mhz slot 1 and 4gb ddr3 800mhz slot 2 for me so I assumed there some errors there and using SSD is fine where it boots a lot faster. I used the multibeast to register as MacPro instead of Macbook Pro because of the nvidia drivers down from website and it improves greatly on playing games like starcraft 2 at high settings of max fps at 45 to a minimum of 20fps. I hope it helps for people who has the Rx80 series.
+
 
+
Update: Multibeast 3.0 has the audio fix for it.
+
 
+
 
+
=== R590 ===
+
{{QE|Y}}
+
* Install Method: iBoot + Mac OS X Snow Leopard DVD Retail + 10.6.6 Combo Update + Multibeast 3.20 + correct DSDT file
+
* Chipset: Intel HM55
+
* Processor: Intel Core i5 450M 2.4 GHz
+
* Audio: Realtek ALC269 (works with VoodooHDA, but remove AppleHDA)
+
* WIFI: Atheros AR9285 ("Broadcom 14e4:4727" reported by "lspci") - '''can't get working'''
+
* LAN: Marvell Yukon 88E8059 ("Yukon 11ab:4381" reported by "lspci") - '''can't get working'''
+
* Video: NVIDIA GeForce GT 330M (works with "MacPro 5,1" MultiBeast System Definition + official drivers)
+
* SATA & IDE: SATA work enabling AHCI in BIOS.
+
 
+
Webcam and Bluetooth work automatically. Tested with Skype and webcam+speakers+mic all work fine (after installing VoodooHDA). Needed "Voodoo PS/2 Controller" and "IOUSBFamily Rollback" (in MultiBeast) to get keyboard and trackpad working after upgrade - trackpad acts as a mouse though and doesn't support swipes. Use "Voodoo battery" to see battery status etc. Tested flash video playback (YouTube) in Safari after installing nVidia drivers and worked fine.
+
 
+
Recommend using these MultiBeast settings: [http://www.hypn.za.net/images/SamsungR590_MultiBeast_Selections.png] and this DSDT file: [http://www.hypn.za.net/downloads/SamsungR590-DSDT.zip]
+
 
+
Experiencing overheating issues while consuming CPU/GPU intensive content. CPU easily reaches 90C and thermal protection shuts the computer down.
+
 
+
==Sony==
+
=== Vaio VPCF13YFX ===
+
{{QE|U}}
+
{| class="wikitable" width="100%"
+
!Parts
+
!Device
+
!Working
+
!Notes
+
|-
+
|'''Processor'''
+
|Intel Core i7 740QM
+
|Yes
+
|with boot arguments "busratio=12 cpus=8" at install disc boot time
+
*Busratio List ([http://3rr0rists.net/macintosh/busratio-for-i3-i5-and-i7-processors.html])
+
**If You have problems using those, then try this: ([http://www.insanelymac.com/forum/lofiversion/index.php/t240542.html])
+
**How to add option setting for busratio ([http://www.insanelymac.com/forum/lofiversion/index.php/t209094.html])
+
|-
+
|'''SATA'''
+
|Hard Disk/DVD-RW (AHCI,MBR)
+
|Yes
+
|Native
+
|-
+
|'''Graphics'''
+
|Nvidia Geforce GT 425M ( 1 GB Dedicated)
+
|no
+
|currently unable to recognize even thought i tried official nvidia mac drivers for this card form nvidia site (EFI string possible? I'm not sure)
+
|-
+
|'''Audio'''
+
|ALC 275
+
|Yes
+
|VoodooHDA (modified with vender/device id) I think it is available form kexts.com or easily found on google
+
|-
+
|'''Wireless'''
+
|Intel Centrino Advanced-N 6250 AGN
+
|No
+
|Cannot find ANY drivers or recognition for it
+
|-
+
|'''USB'''
+
|Intel series 5 3.0 usb
+
|No
+
|If it is not detected after installing other kexts, try this: Kexts.com ([http://www.kexts.com/view/260-intel_5_series_ahciport.html])  (remember to delete mkext cache and repair permissions after installing / modifying kexts)
+
|-
+
|'''Ethernet'''
+
|Marvell Yukon 88E8057
+
|No
+
|Used Yukon2.kext and modified plug in IONetworkingFamily.kext with card';s device and driver id's. Card is detected but states cable is unplugged.
+
|-
+
|'''Battery'''
+
|Rechargeable Li-Ion
+
|Yes
+
|VoodooBattery
+
|-
+
|'''FireWire'''
+
|Ricoh 1394 Compliant Host Controller
+
|Yes
+
|Native
+
|-
+
|'''Bluetooth'''
+
|Foxcomm-T77H114-BCM2070
+
|No
+
|Have not attempted this device yet
+
|-
+
|'''Web Camera'''
+
|Sony Integrated
+
|not sure, not listed in devices, assuming no
+
|
+
|-
+
|'''Card Reader'''
+
|Ricoh SD/MMC Disk Device
+
|no
+
|
+
|-
+
|'''DisplayPort&VideoPort'''
+
|Integrated
+
|No
+
|EFI, DSDT, kext modification to output after video card is recognized?
+
|-
+
|'''Trackpad'''
+
|Built-in
+
|Yes
+
|Had to select VoodooUSB/PS2 and laptop fix for USB in hazard package list to allow it to detect keyboard
+
|-
+
|'''Power Management'''
+
|Shutdown/Sleep/Restart
+
|No sleep
+
|Sleep enabler? Unsure yet, need to activate vidoe card to ensure full support
+
|-
+
|}
+
'''Not working'''
+
*Sleep.
+
**Tried SleepEnabler.kext for 10.6.5 ([http://www.insanelymac.com/forum/index.php?showtopic=196466 InsanelyMac]), kernel panic during boot.
+
**Tried SleepEnabler.kext for 10.6.6 ([http://www.insanelymac.com/forum/index.php?showtopic=242192 InsanelyMac]), won't wake up after sleep.
+
*Built-in trackpad works but multitouch/scroll doesn't.
+
**Tried VoodooPS2Controller with Nub and prefPane ([http://www.insanelymac.com/forum/index.php?showtopic=175372 InsanelyMac]), trackpad panic like in 10.5.5.
+
*Marvell Yukon 88E8057 is detected but states that cable is unplugged
+
**Wifi Does not work and have had no luck or leads with centrino models
+
*Graphics card is not fully enabled yet. NvInject failed to yield results, and Natit causes kernel panic. Cannot get EFI strings yet.
+
'''Installation'''
+
*Installed 10.6.6i hazard. had to boot with "busratio=12 cpus=8". Had to select chamelion 2 RC5, no kernel stick with default vanilla snow leo, dont select audio/graphics packages (produces kernel panic), network kexts and usb fixes are fin. Don't select injectors or sleen enabler due to kernel panic on boot time.
+
*Kexts and dsdt work for 10.6.6. have not tried later updates, cannot get ethernet to connect
+
 
+
'''Boot'''
+
*Chameleon2 RC5
+
*Installed to seperate partition to be able to boot form windows boot loader
+
**Added entry using EasyBCD ([http://neosmart.net/dl.php?id=1])
+
 
+
'''Non-native kexts:'''
+
 
+
Thread started for a similar laptop model: Insanely mac forum ([http://www.insanelymac.com/forum/index.php?showtopic=218716&pid=1654408&mode=threaded&start=#entry1654408])
+
 
+
 
+
'''''/Extra'''''
+
*dsdt.aml
+
**Uploaded to Megaupload: DSDT ([http://www.megaupload.com/?d=GPOWFHRE])
+
**Put in "MacDrive"/Extras/
+
*Audio Codec Verbs and Data:
+
** ALC275VPCF115FM_106_V3.zip ([www.mediafire.com/?tjm0jmmjtjy])
+
 
+
'''''/Extra/Extensions'''''
+
 
+
''For more information and questions, visit [http://www.insanelymac.com/forum/index.php?showtopic=218716&pid=1654408&mode=threaded&start=#entry1654408].
+
 
+
'''''/Extra/Extensions'''''
+
*NullCPUPowerManagement.kext
+
*VoodooHDA.kext ([http://www.kexts.com/view/950-voodoohda.kext_reaktek_alc275.html])
+
 
+
==Toshiba==
+
=== Satellite A100-811 ===
+
{{QE|Y}}
+
{| class="wikitable" width="100%"
+
!Parts
+
!Device
+
!Working
+
!Notes
+
|-
+
|'''Processor'''
+
|Intel Core 2 Duo T5600 (1.83 GHz)
+
|Yes
+
|Out the Box
+
|-
+
|'''SATA'''
+
|Hard Disk (ICH8 Family)
+
|Yes
+
|Out the Box
+
|-
+
|'''PATA'''
+
|DVD+/-RW (ICH8 Family)
+
|Yes
+
|Out the Box
+
|-
+
|'''Graphics'''
+
|Intel GMA950
+
|Yes
+
|Out the box, but need DSDT patch for Laptop. Works only for 32 bit mode. 64 bit - not working (only one resolution). Install with an external monitor.
+
|-
+
|'''Audio'''
+
|AC97 HDA (ALC861)
+
|Yes
+
|[http://code.google.com/p/voodoohda/downloads/list VoodooHDA.kext] (S/L/E)
+
|-
+
|'''Wireless'''
+
|3945ABG b/g
+
|No
+
|
+
|-
+
|'''USB'''
+
|ICH8M Family
+
|Yes
+
|Out the Box
+
|-
+
|'''Ethernet'''
+
|Intel PRO 100 VE (0x10928086)
+
|Yes
+
|IONetworkingFamily.kext (with modifying AppleIntel8255x.kext) + delete AppleHPET.kext
+
|-
+
|'''Battery'''
+
|Integrated
+
|Yes (not testing)
+
|[http://forum.voodooprojects.org/index.php/topic,1092.0.html VoodooBattery.kext] (32/64 bits)
+
|-
+
|'''FireWire'''
+
|TI PCIxx12 OHCI Compliant IEEE 1394 Host Controller
+
|Yes (not testing)
+
|Out the Box
+
|-
+
|'''Bluetooth'''
+
|Toshiba
+
|Yes
+
|[http://www.insanelymac.com/forum/index.php?showtopic=156596 ToshibaBluetooth.kext] - [http://www.insanelymac.com/forum/index.php?s=9de477b75d363359461615bba6da6154&act=attach&type=post&id=46257 x32 version], install only in the S/L/E
+
|-
+
|-
+
|'''Card Reader'''
+
|Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
+
|Partially (not tested)
+
|VoodooSDHCI.kext (32/64 bits)
+
|-
+
|'''Touchpad'''
+
|Integrated PS/2
+
|Yes
+
|[http://forum.voodooprojects.org/index.php/topic,235.0.html VoodooPS2Controller.pkg] (can be installed in /Extra/Extensions/ folder)
+
|-
+
|'''Modem'''
+
|Integrated
+
|No
+
|I´m not using it.
+
|-
+
|}
+
 
+
Install [http://tonymacx86.blogspot.com/2010/04/iboot-multibeast-install-mac-os-x-on.html method]: External Monitor + Legacy Boot CD (or [http://www.tonymacx86.com/Public/iBoot.zip iBoot]) + Mac OSX Snow Leopard 10.6.3 Retail + [http://support.apple.com/downloads/DL1324/en_US/MacOSXUpdCombo10.6.5.dmg Combo Update 10.6.5] + [http://tonymacx86.blogspot.com/2010/06/multibeast-20.html MultiBeast] + [http://support.apple.com/downloads/DL1349/en_US/MacOSXUpdCombo10.6.6.dmg Combo Update 10.6.6]
+
 
+
Notes:
+
IONetworkingFamily.kext must be installed in S/L/E (not in the /Extra/Extensions), same VoodooHDA, ToshibaBluetooth. VoodooPS2 can be installed in /Extra.
+
For solving problem with Cable Unplugged (ethernet) - delete AppleHPET.kext (S/L/E).
+
 
+
Other kexts (/Extra/Extensions/):
+
*EvOreboot.kext
+
*fakesmc.kext
+
*JMicron36xATA.kext
+
*JMicron36xSATA.kext
+
*LegacyAppleRTC.kext
+
*NullCPUPowerManagement.kext
+
Troubles: 64bit mode doesn't work.
+
 
+
===Satellite A200-AH7===
+
{{QE|Y}}
+
Model No. PSAE0C-AH708C
+
 
+
Distro: iAtkos S3 V2 - 10.6.3, Updating to 10.6.4, 10.6.5 and then to 10.6.6 works.
+
 
+
IN CUSTOM INSTALL, MAKE SURE THE FOLLOWING IS CHECKED:
+
 
+
'''iAtkos S3 Main System'''
+
 
+
'''Bootloader'''
+
* Chameleon V2 RC4
+
 
+
'''Patches'''
+
* Leave as is (No Changes)
+
 
+
'''Main Hardware'''
+
* SATA/IDE: INTEL SATA/IDE
+
* Sound: Voodoo HDA (See Issues below)
+
* PS/2: Voodoo PS/2
+
* CPU Power Manager: Voodoo P-State
+
* Laptop Hardware: Battery, Card Reader, TSC Sync
+
* VGA: INTEl, EFI String, GMA 950 27A1(32Bit), GMA 950 27AE(32Bit) (choose Both)
+
* Network: Wired= INTEL PRO V100
+
 
+
'''Issues'''
+
* System fan works sometimes, solution: just unplug Power adapter and plug it back in to make the fan work normally. Searching for a better solution...
+
* Loud Feedback coming from speakers, seems to be due to the Microphone Gain volume stuck at full. Install VoodooHDA 2.7.2 Package, goto SystemPrefs, open VoodooHDA icon, and lower the GAIN to 0. Run Kext utility. If problem persists, edit voodoohda.kext and change gain # to 0 and imix to about 80%. Run Kext Utility.
+
* Internal Wireless can work with only Unencrypted Networks. Linksys WUSB54G V4 is an external adapter and works.
+
* Webcam will fully work if you download CamTwist. FaceTime, Skype, MSN, iChat all work if you open them, and then open CamTwist. Google has lots of more info.
+
 
+
'''SOFTWARE UPDATES'''
+
* Updating from 10.6.5 to 10.6.6 works successfully by downloading the combo update from the official website.
+
* Run "Repair Disk Permissions" each time you update.
+
* If keyboard & Track-pad stop working, just boot into safe-mode using -x and the reboot normally.
+
* If sound stops working, it's most probably because the update placed a new AppleHDA.kext in the (Extensions) Kexts folder. Just delete it, perform a Repair Disk Permissions and reboot.
+
 
+
 
+
 
+
==LG==
+
 
+
===R405-S.CPIIT===
+
{{QE|U}}
+
* Install Method: iBoot + MAC OS X 10.6.3 Intel Snow Leopard RETAIL + 10.6.6 combo upd.
+
* Processor: Intel C2D T8100 2.1GHz (OOB)
+
* Hard Drive: 160 GB - 5400 RPM (OOB)
+
* Memory: 2GB - 2 DIMM (DDR2-667)  (OOB)
+
* Graphics: nVidia 8400M GS (OOB) QE/CI yess
+
* Audio: ALC262  10.6.3(OOB), 10.6.6 with kext OK!
+
* CD/DVD Writer: OK! (OOB)
+
* Wireless: Broadcom 4311 (OOB)
+
* Wired: Yukon 88E8039 with kext OK!
+
* Battery: VoodooBattery
+
* USB: Works OOB
+
* Card Reader: Untested.
+
* Touchpad/Keyboard: Voodoo PS2
+

Latest revision as of 06:43, 15 December 2020

K2MT6j https://writemyessayforme.web.fc2.com/#writemyessay


This page was last modified on 15 December 2020, at 06:43.
This page has been accessed 575,132 times.
Powered by MediaWiki © 2021 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki   |   Privacy policy   |   About OSx86   |   Disclaimers